Generated by All in One SEO Pro v5.0.1.1, this is an llms-full.txt file, used by LLMs to index the site. # CB Radio UK The UK's CB Radio Speciallist ## Posts ### [CB Radio Versus Network Radio Which Fits?](https://cbradio.co.uk/cb-radio-versus-network-radio/) **Published:** September 5, 2026 **Author:** Jan **Excerpt:** CB radio versus network radio: compare coverage, running costs, installation and real-world use for 4x4s, fleets and rural UK journeys with confidence. **Content:** A green lane convoy has turned off the tarmac, the lead vehicle is over the next rise, and mobile signal has disappeared. That is where the difference in **CB radio versus network radio** stops being a specification-sheet question. One system works directly from vehicle to vehicle; the other can put users many miles apart, but relies on an available mobile or Wi-Fi connection. Neither is automatically the better choice. A CB set remains a practical bit of kit for local, independent communication, while network radios suit teams that need wide-area contact without learning radio frequencies or fitting a large aerial. The right answer depends on where you travel, who you need to speak to and what happens when coverage is poor. ## CB radio versus network radio at a glance CB radio uses licence-exempt Citizen Band frequencies and a dedicated aerial to send voice directly between compatible sets. In the UK, a compliant 27 MHz CB radio can be used without an individual licence. It does not need a SIM card, mobile mast, app or monthly service plan. Range varies with terrain, aerial choice, installation quality and local interference, but it is intended for short-range communication. A network radio, often called a PTT over Cellular or PoC radio, looks and operates much like a two-way radio. Press the transmit button and speak. Instead of using a direct radio signal between handsets, however, it sends voice over 4G, 5G or Wi-Fi through a network service. This means a driver in Norfolk can speak to a colleague in Scotland, provided both devices have a working data connection and are registered on the same platform. The practical contrast is simple: CB is independent but local. Network radio can be national or wider-ranging, but it is dependent on infrastructure. ## Why CB still earns its place in a vehicle For 4×4 groups, road runs, recovery work around a site and convoy travel, CB does a job that mobile-based systems do not always replace. It lets nearby vehicles communicate immediately, with no account setup and no concern about whether everyone has installed the same app. When the group is moving through woodland, valleys, quarry tracks or remote lanes, that independence matters. CB is also well suited to situations where the people you need to reach are physically close. A spotter can guide a driver over an obstacle. The rear vehicle can report a gate, issue a warning or confirm that the group is together. On the road, drivers can pass on traffic information or arrange a stop without picking up a phone. A properly installed mobile CB setup is straightforward, but the aerial is not an optional extra. The radio, coaxial lead, mount, earth arrangement and antenna tuning all affect performance. A good radio with a poorly positioned or [untuned aerial](https://cbradio.co.uk/cb-aerial-types-explained/) will disappoint. Conversely, a sensible aerial installation can make a modest CB setup very useful. There is a social side as well. CB remains part of the 4×4, motoring and hobby radio scene because it is open and direct. You can call locally and speak to other users on the same channel, although busy channels and unwanted chatter are possible. That openness is useful for casual community contact, but it is not the same as a private team channel. ### CB limitations to accept before buying Do not buy CB expecting guaranteed coverage across a county. Hills, buildings, dense woodland and the distance between vehicles all have an effect. Aerial height and position can help, but cannot defeat the landscape. The legal power limits and permitted equipment rules also mean that performance should be approached realistically. CB conversations are generally open for others on the channel to hear. It is not appropriate for sensitive business details, customer information or anything that requires privacy. Everyone in the group also needs a compatible CB set and a usable aerial installation, which may be less convenient than issuing compact handheld network radios. ## Where network radio makes more sense Network radio is built for dispersed teams. A transport operator with vehicles travelling around the UK can create a group and speak to all drivers at once, or contact an individual driver, without being limited by normal radio range. A site manager can speak to staff travelling between depots. Event teams can coordinate people in separate towns. For these jobs, the ability to communicate over distance is the main advantage. Most network radios are simple to operate. They have a familiar push-to-talk button, loud speaker, battery and often a display, rather than requiring users to make a conventional phone call. Some models offer GPS location functions, emergency buttons, messaging and managed groups. These features can be useful for a fleet, particularly where a supervisor needs visibility of vehicles and quick contact with staff. Installation can be easier, too. A handheld network radio needs charging and a data connection, not an external CB aerial and coax run. Vehicle-mounted options are available for a more permanent setup, but a business can often deploy handhelds quickly. That convenience carries an ongoing cost. The device may need a SIM, a data allowance, a platform subscription or a managed service. Before choosing a system, establish exactly what is included: the hardware, SIM, network access, talk groups, mapping, administration and support. Cheap equipment can become expensive if the monthly arrangement is unclear. ### Coverage is the deciding factor A network radio is only as capable as the connection beneath it. In areas with strong 4G or 5G coverage, it can feel almost unlimited. In a mobile blackspot, it may have no more usefulness than a phone with no signal. Wi-Fi can provide another route indoors or at a depot, but it does not solve the problem on a remote track. This is why network radio is not a complete substitute for CB on every off-road vehicle. If your main concern is keeping a convoy together beyond mobile coverage, direct radio is the safer primary method. If your main concern is coordinating drivers across the country, network radio is usually the more effective tool. ## Choosing for 4x4s, fleets and hobby use For a weekend 4×4 group, start with CB. It is purpose-suited to vehicle-to-vehicle communication and keeps working when the route takes you away from mobile masts. Choose a suitable aerial for the vehicle, use sound mounting and cable routing, and check the [standing wave ratio](https://cbradio.co.uk/best-cb-radio-starter-kits-uk-buyers/) before relying on it. A starter kit can remove much of the guesswork for a first installation. For a lorry fleet, delivery operation or service business with vehicles spread over a broad area, network radio deserves serious consideration. It offers managed groups, wide-area calling and a familiar push-to-talk method without depending on each vehicle being within radio range of the next. Check real coverage on the roads and sites your staff actually use, not just a national coverage map. For mixed use, carrying both can be the sensible answer. A CB radio handles the local convoy, recovery lane or rural section. A network radio handles contact with the office, a support vehicle or a driver far away. There is no rule saying one system must do every job. ## Costs, reliability and practical ownership CB usually has the higher upfront fitting requirement and lower ongoing cost. You need the radio, aerial, mount, cable, power connection and ideally an SWR meter or professional setup help. Once installed, there is no service subscription for ordinary use. It is a good fit for owners who value self-contained equipment and are happy to spend time getting the installation right. Network radio often has lower setup effort but a recurring commitment. The equipment must be charged, accounts kept active and SIM or service arrangements maintained. It can be easier to manage across many staff members, but it introduces a dependence on both the provider and the mobile network. Reliability is therefore not a single question. CB reliability comes from a sound installation, compatible equipment and realistic local range. Network radio reliability comes from device quality, battery management, service provision and mobile coverage. Consider the failure mode that matters most to you. If a mast outage or rural blackspot would leave a group unable to communicate, keep direct radio available. Before buying, be clear about the conversations you need to have. If they are mostly between vehicles within sight or a few miles apart, a [well-fitted CB](https://cbradio.co.uk/can-cb-radios-talk-far/) is hard to beat. If they are between people working across the country, a network radio can save time and simplify coordination. For advice on matching a radio, aerial and installation to your vehicle, CB Radio UK can help you choose equipment that suits the way you actually travel and work. The best communications setup is the one that still lets you make contact when the route, weather or working day does not go to plan. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-versus-network-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-versus-network-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-versus-network-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-versus-network-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Versus%20Network%20Radio%20Which%20Fits%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-versus-network-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-versus-network-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-versus-network-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-versus-network-radio/?share=telegram) - **Categories:** Uncategorised --- ### [CB Coax Cable Replacement: When You Need It](https://cbradio.co.uk/cb-coax-cable-replacement/) **Published:** September 3, 2026 **Author:** **Excerpt:** Learn when CB coax cable replacement is needed, how to trace faults, choose 50-ohm cable and fit PL-259 plugs for a reliable mobile or homebase set-up. **Content:** A CB set can look perfectly healthy while the coax lets the whole installation down. Weak received signals, intermittent transmission, high SWR readings and a radio that only works when the cable is held in a certain position can all point to the feedline rather than the radio itself. A proper **CB coax cable replacement** is often a straightforward fix, but choosing the right cable and fitting it correctly matters just as much as replacing it. For a 4×4, daily driver, lorry or homebase station, the coax is not simply an accessory. It is the 50-ohm path between your CB radio and aerial. If that path is damaged, crushed, corroded or poorly terminated, power may not reach the aerial efficiently and reflected power can rise. Before blaming the aerial or spending money on a new radio, give the coax a close look. ## When does CB coax cable replacement make sense? Coax cable does not have a fixed service life. A neatly routed indoor cable may give years of trouble-free use, while a cable run through a tailgate, over a sharp roof edge or underneath an off-road vehicle can fail much sooner. Water, vibration, UV exposure and repeated flexing all take their toll. The most obvious reason to replace it is visible damage. A flattened section from a door seal, a cut outer sheath, brittle insulation or green corrosion around a plug are all warning signs. Do not assume a small mark is harmless. Coax relies on the centre conductor, insulation, screen and outer jacket remaining in the right relationship. Crushing or kinking it can alter the cable’s characteristics even where the conductor has not fully broken. Intermittent faults are another common clue. If reception crackles when you move the lead, transmission cuts in and out, or the SWR needle changes when the cable is touched, the problem may be a fractured centre conductor or a failing soldered plug. These faults are particularly common near the radio, aerial mount and places where the cable repeatedly bends. High SWR can also justify investigation, although it does not automatically mean the coax is at fault. An aerial that is not correctly tuned, a poor earth plane, a corroded mount or an [unsuitable aerial position](https://cbradio.co.uk/cb-aerial-types-explained/) can produce similar readings. If the aerial previously tuned well and the SWR has suddenly risen, checking the cable and connectors is a sensible first step. ## Check the simple faults before replacing the cable Start with the plugs. A PL-259 plug that has loosened, filled with moisture or developed a dry solder joint can mimic a failed cable. Examine both ends for bent centre pins, loose outer bodies and signs of water ingress. On a vehicle installation, also inspect the aerial mount, especially the connection beneath the mount where water can sit unseen. If you have a multimeter and the cable is disconnected at both ends, basic continuity checks can reveal a lot. Check continuity from the centre pin at one end to the centre pin at the other, then from the outer shell to the outer shell. There should be no continuity between the centre conductor and outer screen. A short circuit means the cable, plug or mount needs further attention. This test will not find every problem. A cable can pass a simple continuity check but still have water contamination, damage to the dielectric or a fault that only appears when it is flexed. Move the cable gently during testing, paying close attention to the first few inches behind each connector. If the readings change, replacement is normally the sensible route. ## Choosing coax for a CB installation UK CB installations use 50-ohm coaxial cable. That point is non-negotiable. Television-type 75-ohm cable may physically resemble CB coax, but it is not the correct choice between a 50-ohm radio and a CB aerial. For many mobile installations, RG-58 is the usual practical choice. It is flexible, easy to route through a vehicle and suitable for typical legal CB power levels when the run is kept sensible. It is particularly convenient where cable needs to pass behind trim panels, through a bulkhead or around a seat base. For longer runs or [fixed homebase installations](https://cbradio.co.uk/best-cb-aerials-for-homebase/), a thicker, lower-loss cable such as RG-213 can be worthwhile. It is more substantial and less convenient to route, but the lower loss becomes more relevant as cable length increases. It also suits installations where the cable will be permanently exposed to the weather, provided the connectors and entry points are properly protected. The best cable is not always the thickest one. A short run in a Land Rover with awkward routing may work better with correctly fitted RG-58 than with heavy cable forced through tight bends and pinched behind trim. Match the cable to the length, route, environment and radio set-up. Avoid using more cable than necessary, but do not cut it so close that the radio cannot be removed for servicing or the aerial mount cannot be reached. Coiling several metres of spare coax into a tight bundle is poor practice. Leave a modest service loop where needed, then secure the run cleanly. ## Fitting a replacement coax cable properly The easiest option for many users is a ready-made coax lead with PL-259 connectors already fitted. This removes the risk of a poor connector termination and is ideal where the required length and connector arrangement are known. It is also useful when replacing a simple radio-to-mount lead on a standard mobile installation. Making up a cable yourself gives more flexibility, particularly on custom 4×4 builds, roof-mounted aerials and homebase stations. It does require care. The plug must suit the cable diameter, the braid must not touch the centre conductor, and the solder joint needs to be secure without melting the dielectric inside the cable. Before fitting the new lead, plan the route from radio to aerial mount. Keep it away from exhaust heat, moving seat runners, sharp metal edges and areas likely to flood. Where it passes through a panel, use a suitable grommet. On external sections, support the cable so it cannot flap in the wind or rub through on a bracket. Do not trap coax under door seals unless there is no better route and the seal does not compress it. A cable that survives the first fitting can still fail after hundreds of door closures. Tailgates, bonnet edges and removable roof panels deserve the same attention. At the aerial end, make sure the mount itself is sound. On a metal-bodied vehicle, many aerial systems rely on a good earth plane through the mount and bodywork. Replacing the coax will not cure poor bonding, paint beneath the mount or a badly earthed bracket. Clean, solid metal-to-metal contact where required is part of a dependable installation. ## Test SWR after every cable change Once the cable is fitted, [test the SWR](https://cbradio.co.uk/best-cb-radio-accessories/) before regular transmitting. Put an SWR meter in line between the radio and coax, select the appropriate CB band and check readings towards the low and high ends of the channels you use. Follow the meter instructions carefully and use low power where your equipment allows it. A good result tells you that the aerial system is presenting a reasonable match to the radio. It does not only test the aerial: it also gives a useful indication that the new coax, plugs and mount are working together properly. If the reading is high across the band, stop and investigate rather than continuing to transmit. If SWR is low on one end of the band and higher at the other, the aerial may need adjustment. If it is high everywhere, recheck the connector wiring, aerial mount, earth arrangement and cable routing. A new cable can reveal an existing aerial fault that was previously masked by a poor connection. ## Do not overlook water protection Most outdoor coax failures begin at the aerial end. Water drawn into a plug or along the braid can create corrosion and change the cable’s performance well beyond the visibly wet area. Once moisture gets inside, replacement is generally more reliable than trying to dry the lead out. After testing, protect exposed connections using suitable weatherproofing methods and make sure water cannot run directly into the connector. The goal is to keep the joint dry while still allowing it to be inspected and serviced later. Check it periodically, especially after winter road use, green-laning or a vehicle wash. A correctly chosen replacement cable, clean connectors and a properly tuned aerial make a noticeable difference to how a CB set performs. If you are unsure whether the fault lies with the coax, aerial or mount, take a few readings and inspect the installation before ordering parts. A little methodical fault-finding now is far better than being without comms when the convoy has split on a trail or the road conditions turn poor. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-coax-cable-replacement/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-coax-cable-replacement/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-coax-cable-replacement/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-coax-cable-replacement/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Coax%20Cable%20Replacement%3A%20When%20You%20Need%20It&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-coax-cable-replacement%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-coax-cable-replacement/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-coax-cable-replacement/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-coax-cable-replacement/?share=telegram) - **Categories:** Uncategorised --- ### [How to Set RF Gain for Clearer CB Reception](https://cbradio.co.uk/how-to-set-rf-gain/) **Published:** September 1, 2026 **Author:** **Excerpt:** Learn how to set RF gain on a CB radio for clearer reception, less background noise and dependable mobile or homebase communication in the UK on the road. **Content:** A busy channel is where knowing **how to set RF gain** pays off. With the control wound fully up, your CB may pull in weak stations from miles away, but it can also amplify electrical hash, nearby strong signals and general background noise. Set it too low and you may miss the very call you were waiting for. The right setting is not a fixed position on the dial. It changes with where you are, what aerial you use and how busy the band is. For most mobile CB users, RF gain is a simple way to make the receiver more usable. It is particularly handy in a 4×4 convoy, around a busy industrial estate, on a motorway or when parked near other radios. Once you understand what it does, adjustment takes seconds. ## What RF gain actually does RF gain controls the sensitivity of your radio’s receiver. Turning it clockwise normally increases receive sensitivity, allowing the set to hear weaker incoming signals. Turning it anti-clockwise reduces that sensitivity, so the receiver pays less attention to weaker signals, distant stations and some of the background noise accompanying them. It does not increase your transmit power, range or the strength of your outgoing signal. If people cannot hear you, turning up RF gain will not fix it. That is a separate issue involving your aerial system, SWR, power supply, microphone, radio settings or the distance and terrain between stations. Think of RF gain as the radio’s ears. Fully open ears can be useful in quiet countryside when you are trying to hear a distant station. In a noisy vehicle environment or close to a powerful local transmitter, slightly less sensitivity can make the wanted signal easier to understand. Some sets label the control `RF GAIN`; others combine it with another function, often squelch, on a concentric knob or menu. Check the radio manual before adjusting menu items, especially on modern multimode sets where a similar label may control a related receive feature. ## RF gain and squelch are not the same These controls are often confused because both can make a radio seem quieter. They do different jobs. Squelch acts like a gate. It mutes the speaker until a signal is strong enough to open it. RF gain adjusts how sensitive the receiver is before that decision is made. A correctly set squelch stops constant hiss when no one is talking; a correctly set RF gain helps prevent the receiver being overwhelmed by weak noise or unwanted signals. For normal driving, start with RF gain high and set the squelch just above the point where the speaker noise disappears. If the channel remains overly busy or harsh, reduce RF gain a little at a time. Then revisit the squelch, as lowering receiver sensitivity may mean you can back it off slightly. Do not use excessive squelch as a substitute for RF gain. If the squelch is wound too far up, calls from a convoy member at the edge of range can be cut off completely. You may hear the first word, then silence, even though they are still transmitting. ## How to set RF gain step by step Begin with the radio on the channel and mode you intend to use. In the UK, that commonly means an [FM CB channel](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/) for local vehicle-to-vehicle use, although the same receiver principles apply to other permitted modes and equipment. Turn the RF gain clockwise to maximum, or select the highest RF gain value in the menu. Set the volume at a comfortable level. With no one transmitting, turn the squelch down until you hear the normal receiver hiss, then increase it slowly until the noise just stops. This establishes a useful baseline. Now listen to real traffic. If stations are coming through clearly and the background is reasonable, leave RF gain at maximum. There is no prize for turning it down when the band is quiet. Maximum sensitivity is often right for rural driving, green lanes, open country and homebase listening where weak signals matter. If the speaker is full of crackle, distant chatter or harsh noise, turn RF gain back gradually. Move it a small amount, pause and listen. Your aim is to reduce the clutter while keeping the station you need clear. On many radios, the best setting will be only slightly below maximum rather than halfway down. Ask a nearby station to make a few test calls if possible. This is far more useful than judging by noise alone. Reduce RF gain until the unwanted noise falls away, then stop before the test station starts to weaken or break up. If you are travelling in a group, test with the vehicle that is usually furthest away, not the one parked beside you. ## When lower RF gain helps Lowering RF gain is most useful when strong local conditions are making listening difficult. A high-gain mobile aerial, a radio mounted in a vehicle with electrical interference, or several nearby users can all make full sensitivity feel too lively. In a convoy, a station only a few vehicle lengths ahead may sound loud while distant noise fills the speaker between transmissions. Bringing RF gain down can calm the receiver without affecting that close, important traffic. At an off-road event or club meet, it can also reduce the number of distant conversations competing with your own channel. You may notice that a very strong signal sounds distorted, splattery or unpleasant even though the other operator is close. First reduce RF gain. If that improves the sound, the receiver was simply being driven harder than necessary. If it does not, the other station may have an audio, power or installation problem that cannot be cured from your end. Electrical interference is another common mobile issue. Alternator whine, ignition noise, LED light noise and cheap USB chargers can all enter a receiver. Reducing RF gain may make the nuisance less obvious, but it is a workaround, not a repair. Track down the noisy accessory or improve the installation when you can. A good earth connection, sensible cable routing and suitable suppression can make a much bigger difference. ## When to run RF gain at maximum Full RF gain is usually the sensible default when conditions are quiet and you want every bit of receive sensitivity. This includes talking to another vehicle over a longer distance, monitoring a calling channel, or using a homebase station with a properly installed [external aerial](https://cbradio.co.uk/best-cb-aerials-for-homebase/). Terrain matters. Hills, woods, cuttings and large buildings can weaken an otherwise good local signal. If a station sounds faint but readable, turn RF gain up before assuming the radio or aerial is at fault. Keep the squelch low enough that their signal can still open it. There is a trade-off. Maximum RF gain can expose every weak signal and atmospheric noise burst, especially on a long aerial in an open location. That does not mean the setting is wrong. It means the receiver is doing its job. Use the setting that lets you hear the traffic that matters without making every journey a battle with the speaker. ## Common RF gain mistakes The most common mistake is leaving RF gain at minimum after experimenting with the controls. The radio then seems deaf, and users may start replacing microphones or aerials when the receiver sensitivity has simply been turned down. If your CB hears only very close stations, check RF gain before anything else. Another is treating RF gain as a range control. It affects what you hear, not what others hear from you. A poor SWR reading, loose aerial mount, damaged coax or badly placed antenna needs proper attention. Do not transmit for long if your aerial system has not been checked, particularly after fitting a new mobile aerial. It is also easy to make several changes at once. If you alter RF gain, squelch, volume and noise reduction together, you will not know which change helped. Make one small adjustment, listen for a minute, then decide whether to continue. Finally, remember that no RF gain setting can create a clear signal where none exists. If the channel is genuinely crowded, agree another legal channel with your group. If reception changes whenever the engine starts, investigate vehicle interference. If everybody reports weak audio from your station, check your transmit side rather than your receive controls. ## A practical setting for everyday use For a typical UK 4×4 or car installation, set RF gain fully clockwise, set squelch just above the noise threshold, and drive with it that way until conditions give you a reason to alter it. On a busy run, ease RF gain back only enough to make local traffic comfortable to hear. On a quiet rural route or when trying to raise a station at distance, return it to maximum. The control is there to be used, not set once and forgotten. A quick adjustment before a convoy heads into rough ground or a noisy built-up area can make the difference between asking for every message twice and hearing the call first time. If your radio’s control layout is unclear, the [correct manual](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/) and a bit of specialist advice are worth having before you start changing menu settings. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-set-rf-gain/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-set-rf-gain/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-set-rf-gain/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-set-rf-gain/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Set%20RF%20Gain%20for%20Clearer%20CB%20Reception&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-set-rf-gain%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-set-rf-gain/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-set-rf-gain/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-set-rf-gain/?share=telegram) - **Categories:** Uncategorised --- ### [Convoy Communication CB Setup Example for 4x4s](https://cbradio.co.uk/convoy-communication-cb-setup-example/) **Published:** August 30, 2026 **Author:** **Excerpt:** Use this convoy communication CB setup example to choose a radio, aerial and channel plan that keeps UK 4x4 groups clear, safe and organised outdoors. **Content:** A good **convoy communication CB setup example** is not about buying the most powerful-looking radio. It is about making sure every vehicle can hear the lead, reply without fuss, and stay in contact when the lane gets tight, dusty or spread out. For most UK 4×4 groups, a properly fitted CB, a well-matched aerial and a simple operating plan will do far more than a box full of expensive extras. CB remains a sensible choice for green-laning days, off-road sites, road trips and local vehicle convoys because it gives the whole group a shared channel. Nobody needs mobile signal, an app account or a particular handset. Press the microphone, speak clearly, and everyone set to the same channel can hear the call. ## Convoy communication CB setup example Picture a six-vehicle 4×4 convoy heading out for a full day on mixed roads and legal byways. The lead vehicle has a compact mobile CB mounted within easy reach, powered directly from the vehicle electrical system through a fused supply. It uses a good-quality external aerial mounted high on the rear bodywork or roof rack, with the aerial clear of as much metalwork as practical. The second, middle and tail vehicles use the same basic arrangement: a legal UK CB radio, a correctly installed mobile aerial, sound coaxial cable and a microphone that can be reached without taking attention from the road. They all agree a working channel before moving off, with a second channel nominated only if the first becomes busy. The convoy leader makes the first call before departure: “Radio check from lead to all stations.” Each vehicle replies in order, using a simple call sign such as Lead, Two, Three, or Tail End Charlie. If one vehicle is weak or unreadable, deal with it before leaving the meeting point. A radio that only works when parked bumper-to-bumper is not ready for a day out. For a typical group, the practical layout looks like this: “`text Lead vehicle – CB radio, external aerial, navigation, convoy control Middle vehicles – CB radio, external aerial, relay messages if needed Tail vehicle – CB radio, external aerial, confirms the group is complete Shared channel – Chosen before departure Backup channel – Agreed before departure, used only when instructed “` That is the basic system. It is deliberately uncomplicated, because the radio arrangement has to work when the driver is concentrating on ruts, gates, traffic or a recovery situation. ## Start with the right radio and aerial For straightforward convoy use, a compact 40-channel CB is normally the right place to start. Look for a clear display, accessible controls, a solid microphone connection and a speaker loud enough for a vehicle cabin. An [external extension speaker](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/) can make a major difference in a noisy Defender, pickup, soft-top or work vehicle, particularly when the radio is mounted low down. The aerial matters at least as much as the radio. A poor aerial installation can make a decent set sound disappointing, while a correctly fitted aerial can give a modest radio excellent practical range. Vehicle-mounted aerials need a suitable mount, sound cable routing and, for many types, a good earth plane through the vehicle body. Fibreglass panels, roof racks with insulated fittings and plastic-bodied vehicles may need more thought than a simple metal roof installation. A short aerial is neat and less likely to strike branches, but it may sacrifice some performance. A longer whip generally gives better results, yet can be awkward in wooded lanes, car parks and low entrances. There is no single perfect length. Choose one that suits where and how the vehicle is used, then fit it properly. Before relying on any installation, check the [standing wave ratio (SWR)](https://cbradio.co.uk/cb-accessories-that-make-your-radio-work-better/). This confirms that the aerial system is reasonably matched to the radio and helps protect the transmitter. Do not assume a new aerial is tuned correctly straight from the packet. Mounting position, cable length and nearby metalwork all affect the result. ## Mounting position changes the result The highest practical aerial position usually gives the best all-round convoy coverage. A roof mount is often effective because the aerial has a clearer view in every direction. A rear body mount is popular on 4x4s because it is strong, accessible and less exposed to low branches than a roof whip, though the vehicle can block some signal towards the front. Bonnet mounts and spare-wheel carrier mounts can work well, but they are compromises. They may be ideal where roof access is difficult or where a vehicle regularly enters height-restricted areas. The key is to understand the compromise rather than expecting every mounting position to perform identically. Keep the coaxial cable away from sharp edges, moving hinges and excessive heat. Avoid tightly coiling unused cable into a small bundle behind the dashboard. Use proper connectors, protect any holes through metalwork with a grommet, and make sure the aerial mount remains mechanically secure. Off-road vibration finds loose fittings quickly. ## Set rules before the wheels move A convoy channel becomes useful when everyone uses it with a little discipline. Long conversations, music played into the microphone and constant calling make it harder for the person at the back to report a problem. Keep messages short, relevant and easy to understand. The lead should call hazards early: oncoming traffic, a tight turn, a gate, a stop, a change of route or a vehicle approaching from behind. The tail should report when the last vehicle is through a junction or obstacle. This lets the lead know whether to keep moving, wait, or turn back. Use plain language first. “Stop at the next safe lay-by” is clearer than a coded message when a new member has joined the group. CB 10 codes can be useful among people who know them, but they should never replace a direct instruction where safety is involved. It also helps to nominate one person as the radio lead. In a small convoy that will usually be the driver at the front. In a larger group, a passenger can handle radio traffic and navigation, allowing the driver to focus on the terrain. If the convoy splits at a junction or a recovery site, say so clearly and confirm which vehicles are in each section. ## Range is not a promise CB range depends heavily on terrain, aerial installation, vehicle position and interference. On open ground, a group may communicate comfortably over several miles. In wooded valleys, dense urban areas, quarry sites or rolling countryside, range can drop sharply. Two vehicles only a short distance apart may struggle if a hill sits between them. That is why convoy spacing matters. Keep the group close enough that each vehicle can normally hear the one ahead or behind. If the convoy becomes stretched, a middle vehicle may need to relay a message between lead and tail. This is far more reliable than expecting every radio to reach the front at all times. Do not use [linear amplifiers](https://cbradio.co.uk/are-cb-amplifiers-legal-uk/) as a substitute for a properly installed aerial and sensible spacing. Apart from legal considerations, extra power does not cure poor reception. If your radio can transmit further than it can hear, the convoy still has a communication problem. ## A practical pre-run check Before setting off, take five minutes to check the radios. Make sure each set turns on, the chosen channel is correct, volume and squelch are set sensibly, and every aerial is firmly attached. Run a radio check with the vehicles spaced out slightly rather than parked in a tight row. Then agree the working channel, backup channel, lead vehicle and tail vehicle. Confirm what the group will do if someone loses contact: usually stop safely, wait for the vehicle behind, and avoid reversing on a public road unless it is safe and necessary. A simple plan prevents a small fault becoming a scattered convoy. Use legal UK CB equipment and operate it within the applicable licence-exempt conditions. If you are unsure whether a particular radio mode, modification or accessory is suitable, check before fitting it. The dependable choice is generally the compliant one, correctly installed and used with consideration for other channel users. A well-sorted CB setup earns its place when a gate is missed, a vehicle stops unexpectedly or the route disappears behind the next ridge. Fit the aerial carefully, test the system before the day begins, and keep the radio traffic calm. That is how a convoy stays together without making communications the hard part of the trip. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/convoy-communication-cb-setup-example/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/convoy-communication-cb-setup-example/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/convoy-communication-cb-setup-example/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/convoy-communication-cb-setup-example/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Convoy%20Communication%20CB%20Setup%20Example%20for%204x4s&body=https%3A%2F%2Fcbradio.co.uk%2Fconvoy-communication-cb-setup-example%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/convoy-communication-cb-setup-example/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/convoy-communication-cb-setup-example/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/convoy-communication-cb-setup-example/?share=telegram) - **Categories:** Uncategorised --- ### [Extension Speakers for Clearer CB Radio Audio](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/) **Published:** August 28, 2026 **Author:** **Excerpt:** Choose extension speakers for clearer CB audio in 4x4s, cars and homebase stations. Learn impedance, wattage, fitting and noise control for UK users daily. **Content:** A good CB radio can receive perfectly well and still be difficult to hear. Engine noise, tyres, heaters, open windows and a busy cab can bury weak audio, particularly when you are green-laning, convoying or working from a lorry. **Extension speakers** move the sound from the radio’s small built-in speaker to a position where it can actually be heard. They are a straightforward upgrade, but not every speaker suits every installation. The right choice comes down to impedance, power handling, plug type, mounting position and the amount of noise in the vehicle. Get those basics right and an external speaker can make ordinary CB use far less of a strain. ## Why fit an extension speaker? Most mobile CB radios have compact internal speakers. That makes sense when space is limited, but the radio may be mounted low in the dash, inside a console or under a seat. In those positions, sound is directed into trim panels rather than towards the driver. An extension speaker, often called an external CB speaker, connects to the radio’s external speaker socket and lets you place the audio nearer ear level. In a 4×4, it might sit on the dash, A-pillar area or overhead console. In a lorry, it may be mounted above the windscreen or close to the driver’s position. At home, it can be positioned on a shelf or desk away from the radio itself. The benefit is not simply more volume. A properly positioned speaker can give clearer speech at a sensible level, so you are less likely to miss a call sign, road warning or convoy instruction. It also means you do not have to run the radio flat-out, which can make distorted audio more tiring to listen to. ## Choosing extension speakers for your CB radio Start with the radio manual or the marking beside the external speaker socket. Most CB radios use an [8-ohm external speaker](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/), and this is the usual choice for a mobile setup. Do not assume that every speaker from another type of equipment is suitable. A mismatch can reduce volume, affect sound quality or put unnecessary load on the radio’s audio output. The plug matters just as much. Many CB sets use a 3.5 mm mono jack for the external speaker connection, though there are variations between models and older equipment. Check whether your radio needs a mono or stereo plug, the plug size, and whether the cable length will reach the intended mounting point without being stretched. ### Power handling: more is not always better CB audio outputs are normally modest, so there is no need to fit a huge hi-fi speaker. A compact external speaker with suitable impedance and a power rating above the radio’s output is usually all that is required. In practical terms, a speaker designed for communications use is often a better bet than a larger general-purpose unit. Look for clear, speech-focused audio rather than exaggerated bass. CB communication is mainly voice, and a speaker that keeps mid-range speech crisp will be more useful than one designed to make music sound fuller. This is especially true in a noisy Defender, pickup, van or agricultural vehicle. A volume control on the speaker can be useful where the radio is mounted out of reach, but it is not essential. For some installations, a basic fixed-volume speaker is more reliable and keeps the setup simple. It depends on whether more adjustment at the speaker is genuinely useful or just another control to knock accidentally. ### Size and construction Small box speakers suit most mobile installations because they are easy to mount and do not take up valuable cab space. A larger speaker can offer a little more presence, but it may be harder to place properly and can become an obstacle in a working vehicle. For off-road use, pay attention to the housing and bracket. A solid mounting arrangement matters more than a fancy finish. Corrugations, rutted lanes and vibration will soon expose a flimsy bracket or a speaker placed loosely on the dashboard. If the vehicle is regularly used with doors off, windows open or in damp conditions, avoid mounting a non-weatherproof speaker where it will be directly exposed. ## The best place to mount an external CB speaker The ideal location is close enough to hear clearly, without blocking your view, interfering with airbags, or creating a snag hazard. It should point broadly towards the driver or the main listening position. A speaker firing into the footwell may be louder than the internal radio speaker, but it will not deliver the same improvement as one mounted higher up. In many 4x4s, a dash-top position can work well if there is a secure, unobtrusive fixing point. An overhead console is another popular choice, particularly where the CB radio is mounted near the roof. In a car or van, a position near the centre console or lower A-pillar may be more practical, provided it does not obstruct controls or sightlines. Do not mount anything over an airbag cover, in an airbag deployment path, or where it could become a projectile in a sudden stop. Keep the speaker and cable clear of pedals, steering components, gear levers and handbrake operation. A neat install is not just cosmetic. It is safer and easier to fault-find later. ### Cable routing and interference Route the speaker lead behind trim where possible, leaving enough slack for removal of the radio or speaker. Do not trap the cable under sharp metal edges, screws or seat runners. If it must pass through a panel, use suitable protection around the hole. Try to keep the speaker cable away from high-current power wiring, ignition components and noisy vehicle electronics. Speaker leads do not usually cause interference on their own, but poor routing can pick up unwanted noise. If you hear alternator whine, clicking or electrical buzz through the speaker, first check the radio’s power wiring and earth. The issue may be present before the audio reaches the external speaker. For a homebase station, cable routing is simpler, but speaker placement still matters. Keep the speaker away from the microphone to reduce the chance of feedback when using high volume. Place it where you can hear it without having to turn it up enough to disturb everyone else in the room. ## Fitting an extension speaker step by step Before buying or fitting anything, switch the CB radio off and confirm the external speaker socket specification. Plan the speaker position before drilling any holes. Hold it in place, check visibility from the driving seat and make sure the cable can reach naturally. Mount the bracket using appropriate fixings for the surface. A self-tapper may be fine for a solid metal mounting point, while a dash panel may need a different approach or an existing screw point. Avoid drilling into unknown areas of a dashboard, roof lining or pillar trim without checking what is behind it. Run the cable neatly, connect the plug fully to the external speaker socket, then power the radio back on. On most sets, inserting the plug disconnects the internal speaker automatically. Test receive audio first at low volume. Listen to several transmissions and adjust the speaker direction and volume before securing the cable permanently. If there is no sound, do not assume the speaker is faulty. Check the radio volume and squelch, make sure the plug is fully home, and confirm the correct socket has been used. Some radios have sockets for PA speakers as well as external receive speakers, and they are not interchangeable. ## Common problems and what they usually mean Thin or quiet audio often points to the wrong impedance, an unsuitable speaker, a poor plug connection or a radio with low audio output. Distorted sound at higher volume may mean the speaker is too small for the level being demanded, although a weak or distorted radio audio stage can produce the same symptom. If the speaker works intermittently over bumps, inspect the plug, lead and mounting. A cable that is pulled tight or repeatedly flexed at the plug will eventually fail. If adding the speaker introduces noise, check the radio’s power and earth connections before replacing components. Clean [power wiring and a sound vehicle earth](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/) are fundamental to good CB audio. A speaker will not fix poor reception caused by [an aerial issue](https://cbradio.co.uk/cb-aerial-types-explained/), an incorrectly tuned installation or excessive electrical interference. It can make received speech easier to hear, but it cannot create a signal that the radio is not receiving properly. Treat it as one useful part of the whole installation. ## A worthwhile upgrade for working and off-road vehicles For a compact, low-cost accessory, an external speaker can make a noticeable difference to daily CB use. It is particularly worthwhile where the radio is tucked away, the cab is noisy, or several people need to hear traffic at once. Choose a communications speaker with the correct impedance and plug, mount it securely, and put clarity ahead of sheer volume. At CB Radio UK, the practical approach is always the same: match the accessory to the radio and vehicle, rather than buying on size or appearance alone. If you are unsure about compatibility, have the CB radio model and the intended mounting position to hand before asking for advice. A few minutes of checking can save a poor fit, unnecessary rewiring and a speaker that spends its life competing with engine noise. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Extension%20Speakers%20for%20Clearer%20CB%20Radio%20Audio&body=https%3A%2F%2Fcbradio.co.uk%2Fextension-speakers-clearer-cb-radio-audio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/?share=telegram) - **Categories:** Uncategorised --- ### [Homebase Versus Mobile CB for UK Drivers and Hobbyists](https://cbradio.co.uk/homebase-versus-mobile-cb/) **Published:** August 26, 2026 **Author:** **Excerpt:** Compare homebase versus mobile CB for UK use, from aerial choice and power supplies to installation, range, portability and everyday practicality at home. **Content:** A CB radio can be far more useful when it is set up for the way you actually use it. The choice between **homebase versus mobile CB** is not simply a matter of putting the same radio indoors or in a vehicle. Your aerial position, power supply, installation space and the people you want to talk to will all affect the result. For a green-laning group, a 4×4 convoy or a working vehicle, mobile CB is usually the obvious starting point. For a hobbyist listening locally, keeping in touch from home, or building a more permanent station, a homebase setup can offer real advantages. Neither is automatically better. The right one is the one that gives you reliable communication without creating an awkward installation or unnecessary expense. ## Homebase versus mobile CB: the practical difference A mobile CB installation is designed around a vehicle. The radio runs from the vehicle’s 12V electrical system, the aerial is mounted externally, and the whole setup needs to cope with vibration, weather and daily use. Compact radios, short leads, a sensible microphone position and a properly mounted aerial matter as much as the radio itself. A homebase CB setup stays in one place. It normally uses a mains power supply to provide 12V DC to the radio, along with a fixed external aerial, suitable coaxial cable and a permanent or semi-permanent operating position. This gives you more freedom over radio placement and can make monitoring far more comfortable, especially if you use an extension speaker. The radio itself may be the same type in either setup. What changes is the supporting equipment. A good vehicle aerial needs to be practical around low branches, car parks and height barriers. A homebase aerial can usually be taller and positioned higher, which is often more valuable than changing the radio body. ## When a mobile CB setup makes sense Mobile CB earns its place when communication needs to travel with you. It remains a straightforward option for off-road groups, road trips, agricultural work, event marshals and drivers who want direct short-range contact without depending on mobile signal. For 4×4 use, a properly fitted mobile set lets the lead vehicle call out obstacles, route changes and stops without everyone reaching for a phone. It is particularly useful where terrain breaks mobile coverage or where the group needs immediate, shared communication. One transmission can reach every correctly tuned radio on the same channel. The main benefit is convenience. Turn the ignition on, select the channel agreed by the group and you are ready to go. A radio mounted within easy reach is safer and more useful than one stored in a case. For occasional users, a simple starter kit with a compact CB, a vehicle aerial and the required fitting accessories is often the sensible route. There are compromises. Vehicle aerials are rarely in the ideal position. Roof mounting generally gives a better all-round radiation pattern than a bumper, spare-wheel carrier or low body mount, but the best location is not always possible. Fibreglass roofs, plastic panels and poor earth bonding can also affect aerial performance. A [no-ground-plane aerial](https://cbradio.co.uk/cb-aerial-types-explained/) may be the right answer in some installations, but it should be chosen for the vehicle rather than as a universal shortcut. Cable routing needs care too. Coax should not be crushed in door seals, tightly kinked or run carelessly alongside wiring that may introduce interference. The power feed should be properly fused, and the radio needs a solid installation rather than a mount that works loose on rough ground. ### Mobile CB is about the aerial, not just the radio A capable radio connected to a poorly located or badly tuned aerial will disappoint. Before judging range, check the aerial mount, earth arrangement where required, coax connections and standing wave ratio. An SWR meter is one of the most useful tools in a CB kit because it helps confirm that the aerial system is operating as it should. Do not assume a [longer aerial](https://cbradio.co.uk/what-cb-antenna-length-means-for-your-setup/) is always the best choice. A taller whip can perform well, but it may be impractical for woodland lanes, garages and everyday driving. A shorter aerial with a sound mount and correct tuning is often the better real-world choice. ## When a homebase CB setup is the better option A homebase is a strong choice if you mainly use CB from one location. That might mean a workshop, shed, office, farm building or spare room. It suits users who enjoy monitoring local activity, chatting with nearby operators, testing equipment, or staying in contact with family members heading out in vehicles. The biggest advantage is usually aerial height. A fixed vertical aerial mounted clear of nearby obstructions can have a much better view of the surrounding area than an aerial fitted low down on a vehicle. Local terrain still matters greatly – hills, buildings, trees and the distance between stations will limit any CB system – but a well-positioned home aerial gives a station the best chance of hearing and being heard. A homebase is also more comfortable for longer sessions. You can use a full-size microphone, an external speaker, a larger display radio or an organised bench setup without worrying about dashboard space. A regulated [12V power supply](https://cbradio.co.uk/cb-radio-power-supply-what-to-choose/) rated appropriately for the radio gives stable power, while good-quality coax and weatherproof external connections protect the installation over time. The drawback is permanence. You need somewhere suitable for the radio, a safe route for cable and a realistic way to mount the aerial. If you rent your home, live in a flat or have limited outdoor access, the aerial can be the deciding issue. An indoor aerial may receive something, but it is not a replacement for a properly installed external antenna. ### Planning, safety and neighbours Before fitting a homebase aerial, consider the mounting structure, wind loading, cable entry and local restrictions. A tall mast on a chimney or wall is not a casual job. It must be mechanically secure, properly sited and installed with attention to electrical safety. Planning rules, landlord conditions and property management requirements may apply, so check what is needed before buying hardware. It is also worth keeping the installation tidy and considerate. Place the aerial as clear as practical from other antennas and services, use suitable brackets and fixings, and avoid running cable where it can be damaged. If television, audio or other equipment suffers interference, inspect the station installation first rather than assuming the other equipment is at fault. ## Range: why the answer is never a simple number Both homebase and mobile CB users often ask how far they can talk. There is no honest fixed answer. CB range depends on aerial efficiency and height, surrounding terrain, buildings, weather conditions, electrical noise, the quality of the other station’s installation and how busy the channel is. Two vehicles on open ground with well-installed aerials may communicate clearly over a useful distance, while two stations only a few miles apart can struggle if a hill or dense built-up area sits between them. A homebase with a high, clear aerial can often communicate well with mobiles in its local area, but it cannot overcome every obstruction. Conditions on 27MHz can occasionally change dramatically, allowing distant stations to be heard. That can be interesting for hobby users, but it is not something to rely on for a convoy or work communication. For dependable local use, focus on a correctly tuned aerial system and sensible expectations. ## Choosing equipment for each setup For mobile CB, start with the vehicle and intended use. A compact radio suits a crowded cab or dashboard, while a larger unit may be fine in a lorry, van or dedicated off-road vehicle. Choose an aerial mount that is genuinely secure and an aerial length you can live with. Add a speaker if engine, tyre or wind noise makes the radio difficult to hear. For a homebase, choose a power supply with enough continuous capacity for the radio’s transmit demand, not just its receive current. Use a fixed aerial designed for CB frequencies, appropriate mounting hardware and outdoor-rated coax where needed. Keep the feed run sensible: unnecessarily long or poor-quality cable can introduce losses before the signal even reaches the aerial. In either case, use UK-compliant, licence-exempt CB equipment and operate it within the permitted modes and power limits. Check current Ofcom requirements if you are unsure, particularly when considering older equipment, imported radios or additional transmitting equipment. A linear amplifier is not a simple range upgrade and may take an installation outside the conditions for licence-exempt CB use. ## Can one CB radio do both jobs? Yes. Many users begin with a mobile installation and later bring the radio indoors for use with a suitable 12V power supply and fixed aerial. Others keep a second radio at home so the vehicle setup remains untouched. The deciding factor is not whether the radio can be moved, but whether you want to repeatedly disconnect leads, retune aerial systems and reconfigure the installation. A shared radio is sensible for occasional use and a modest budget. Separate setups are easier if you use CB regularly at home and on the road. They also mean you can leave each aerial correctly installed and tuned for its own purpose. CB Radio UK can help match radios, aerials, mounts, power supplies and the smaller fittings that turn a box of equipment into a usable station. If you know your vehicle type, intended aerial position and where you expect to use the radio, choosing the right kit becomes much more straightforward. Start with the communication you need most. Fit mobile CB if the group, work or adventure happens on the move. Build a homebase if your station needs a fixed point, a higher aerial and a comfortable place to operate. In both cases, spend time on the aerial installation – it will do more for everyday performance than chasing features you may never use. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/homebase-versus-mobile-cb/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/homebase-versus-mobile-cb/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/homebase-versus-mobile-cb/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/homebase-versus-mobile-cb/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Homebase%20Versus%20Mobile%20CB%20for%20UK%20Drivers%20and%20Hobbyists&body=https%3A%2F%2Fcbradio.co.uk%2Fhomebase-versus-mobile-cb%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/homebase-versus-mobile-cb/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/homebase-versus-mobile-cb/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/homebase-versus-mobile-cb/?share=telegram) - **Categories:** Uncategorised --- ### [How to Connect Extension Speaker to a CB Radio](https://cbradio.co.uk/how-to-connect-extension-speaker/) **Published:** August 24, 2026 **Author:** **Excerpt:** Learn how to connect extension speaker units to a CB radio, choose the right plug, mount it well and diagnose weak, distorted or silent audio safely. **Content:** A CB can be working perfectly yet still be difficult to hear once the engine, tyres, heater fan and road noise get involved. That is where an external speaker earns its place. If you are wondering **how to connect extension speaker** equipment to your CB radio, the job is normally straightforward, but choosing the right speaker, plug and mounting position makes a real difference to usable audio. For a 4×4, car, van or lorry installation, an extension speaker moves the sound closer to the driver and away from the radio’s often restricted built-in speaker. It is a simple upgrade, but it is worth doing properly rather than just plugging in the first speaker you find. ## Check your CB radio’s external speaker socket Start by looking for a socket marked **EXT SP**, **EXT**, **SP** or **External Speaker**. On most mobile CB radios it is a 3.5 mm mono jack socket, usually positioned on the rear or side of the set. Plugging a suitable speaker into this socket normally disconnects the radio’s internal speaker automatically. Do not assume every socket is the same. Some compact radios use a smaller 2.5 mm socket, while certain radios may have a combined accessory connection or a specific connector arrangement. Check the radio handbook, the label beside the socket, or the manufacturer’s specification before ordering a speaker or adaptor. The external speaker socket is an audio output. It is not a microphone socket, programming socket or aerial connection. Forcing the wrong plug into a socket can damage the connector, and using an aerial lead or microphone adaptor in the wrong place will not produce sound. ### Use the correct plug type Most CB extension speakers are fitted with a 3.5 mm mono plug, also called a TS plug. It has one insulating ring and is the usual arrangement for an 8-ohm external CB speaker. A stereo 3.5 mm plug may physically fit but is not always the right choice, as its contact layout can cause poor or intermittent audio in a mono socket. If your speaker has bare wires rather than a fitted plug, use a properly wired mono plug suited to the radio. The tip is normally the speaker positive connection and the sleeve is negative or return. With one speaker, reversing these wires will not usually make an audible difference. Polarity matters more where two speakers are used together, as incorrect phasing can make audio sound thin. ## Choose an extension speaker that suits the radio An extension speaker is not simply any small loudspeaker with a cable. The important figures are impedance, power handling, connector type and physical build quality. For most CB radios, an **8-ohm speaker** is the safe and common choice. Check the handbook if you are uncertain. Fitting a speaker with an impedance lower than the radio permits can put extra load on the audio output stage. It may sound louder briefly, but it can cause distortion, overheating or damage. A higher-impedance speaker is generally less risky electrically, although it may be quieter. Power ratings do not need to be excessive. A CB radio’s audio output is relatively modest, so a compact external speaker rated for a few watts is normally adequate. More useful than a large wattage figure is a speaker designed for clear voice frequencies. CB communication is about hearing speech through noise, not producing deep bass. For open-top vehicles, working vans and off-road use, choose a speaker with a sturdy housing, a mounting bracket and a cable that is long enough to route safely. A weather-resistant model is sensible if the speaker may be exposed to damp, dust or muddy boots, but no speaker should be left where it can fill with water. Avoid connecting the external speaker output directly to headphones, earbuds, a home hi-fi input or a powered computer speaker without checking compatibility. A CB’s speaker output is amplified and intended to drive a passive speaker. Powered equipment normally expects a low-level line signal, so it can overload or sound badly distorted. ## How to connect an extension speaker in a vehicle With the CB radio switched off, plug the extension speaker into the external speaker socket. Make sure the plug is fully seated. A plug that is only partly inserted can leave you with crackling, one-sided contact or no sound at all. Switch the radio on, turn the volume down, then bring it up gradually while receiving a known transmission or using the squelch control. The internal speaker should usually fall silent as soon as the extension speaker is connected, and audio should come through the new speaker clearly. If the radio has a PA socket as well as an external speaker socket, do not mix them up. The PA output is for a public-address horn speaker and may only work when the radio is set to PA mode. An extension speaker must connect to the external speaker output. Route the cable after you have confirmed the speaker works. Run it behind trim panels or along existing cable routes where practical, but do not trap it under sharp metal, seat runners or door seals. Keep it well clear of pedals, steering components, gear levers, airbag areas and any place where it could interfere with safe driving. If you need extra cable length, use a quality mono extension lead of the correct size. Keep the added cable as short as practical and secure joins so they cannot pull apart. A loose connector behind the dashboard is a common cause of audio that cuts out over rough ground. ### Finding the best mounting position Speaker placement often matters more than spending extra money on a larger unit. Mount it where the driver can hear it without turning up the volume unnecessarily. Good positions include beneath the dashboard, on the lower dash, beside the centre console, or high on the transmission tunnel where it will not obstruct controls. Aim the speaker grille towards the driver rather than into the footwell or at the windscreen. Sound reflecting off glass and hard plastic can make speech harsher, while a speaker buried behind a seat or under loose carpet will lose clarity. In a 4×4, consider vibration and water as carefully as sound. Use the supplied bracket or a solid mounting point, and do not attach the speaker to flimsy trim that will buzz on rough tracks. Leave enough cable slack for seat movement, but not enough for the lead to snag. For a [homebase station](https://cbradio.co.uk/cb-power-supply-sizing/), position the speaker near ear level if possible and away from the radio’s cooling vents. Keep its cable separate from power leads and aerial feeder where you can. Audio leads rarely create a major problem, but tidy routing makes fault-finding much easier later. ## Set the volume and squelch for clear speech Once fitted, reset the radio rather than assuming the old settings will suit the new speaker. Turn the volume to a comfortable level with a signal present. Then [adjust the squelch](https://cbradio.co.uk/cb-squelch-adjustment/) until background hiss just disappears, backing it off slightly if weak stations are being cut out. A clearer speaker can reveal more high-frequency speech detail, which some users initially mistake for harshness. Before changing equipment, try moving the speaker, lowering the volume slightly and checking the radio’s tone control if it has one. In a noisy cab, a small speaker close to the driver is usually more effective than a bigger unit mounted too far away. Do not use a very high volume setting to overcome engine or road noise for long periods. Distortion makes calls harder to understand and can fatigue your ears. Better speaker placement, secure doors and windows, or a radio with a suitable noise-reduction feature may be the better answer. ## If the extension speaker has no sound First, remove the external speaker plug and see whether the radio’s internal speaker returns. If it does, the CB is probably receiving normally and the issue is with the speaker, plug, cable or connector. Check that the plug matches the socket size and is fully home. Inspect the cable for crushing, cuts and loose strain relief near the plug. If the sound appears only when you twist the plug, the connector or socket may be worn or dirty. Switch the radio off before cleaning a connector, and avoid flooding the socket with spray lubricant. If both the internal and extension speaker are silent, confirm the volume is turned up, the squelch is not set too high, and the radio is actually receiving a transmission. A radio with no aerial connected or a poor aerial installation may have no useful signal to hear, but an aerial fault does not usually stop the normal squelch noise. Distorted audio can point to a damaged speaker cone, water ingress, an unsuitable impedance, or a loose plug connection. Test with another known-good 8-ohm CB extension speaker where possible. This is quicker and more reliable than replacing parts at random. ## Keep the installation serviceable A good installation should be easy to inspect. Leave the plug accessible, avoid permanently burying cable joins behind panels, and use cable ties sparingly enough that the lead is not crushed. If the vehicle is used off-road, check the bracket and cable route after a few trips because vibration finds weak mounting points quickly. An extension speaker is a modest addition, but it can make a mobile CB far more practical when conditions get noisy. Choose a compatible 8-ohm speaker, use the correct external speaker socket, mount it where voices can be heard clearly, and keep the cable out of harm’s way. If you are unsure which speaker or plug suits your particular set, the specialist team at CB Radio UK can help you narrow it down before you fit it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-connect-extension-speaker/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-connect-extension-speaker/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-connect-extension-speaker/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-connect-extension-speaker/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Connect%20Extension%20Speaker%20to%20a%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-connect-extension-speaker%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-connect-extension-speaker/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-connect-extension-speaker/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-connect-extension-speaker/?share=telegram) - **Categories:** Uncategorised --- ### [AM FM CB Radios: What UK Drivers Need to Know](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/) **Published:** August 22, 2026 **Author:** **Excerpt:** AM FM CB radios explained for UK drivers: modes, legal use, aerial choice and practical advice for 4x4s, lorries and homebase stations across Britain. **Content:** A good AM FM CB radio can make a 4×4 convoy, working vehicle or rural journey far less isolated. It gives you direct, short-range communication without relying on mobile coverage, apps or subscriptions. But the letters on the front panel do not tell the whole story. The mode you use, the channels available, the aerial fitted and the way the set is installed will decide whether your CB is a useful tool or just another box on the dashboard. For UK users, the sensible starting point is to choose a radio that matches the people you need to talk to. That may sound obvious, but it prevents one of the most common mistakes: buying a feature-packed set that is technically capable yet poorly matched to the local users, vehicle or intended job. ## What Does AM FM CB Mean? AM and FM are different ways of transmitting your voice on CB frequencies. FM stands for frequency modulation, while AM stands for amplitude modulation. A multimode CB may also include SSB, or single sideband, but an AM FM CB set is primarily describing its ability to transmit and receive on both AM and FM. FM has long been the familiar choice for UK CB use. It generally gives clear, consistent local communication and is well suited to vehicle-to-vehicle use, green-laning groups, site work and convoy calls. When the signal becomes weak, FM can suddenly become noisy or disappear, but within normal working range it is straightforward and effective. AM is widely used elsewhere in Europe and can matter when travelling or talking with operators using European-specification equipment. Its audio character is different, and weak signals may remain audible beneath background noise when an FM signal would be harder to copy. That does not automatically make AM better. For many UK users, FM remains the mode they will use most often because it is what local contacts are using. A radio carrying AM and FM gives you more flexibility, particularly if you travel abroad, attend radio events or want broader compatibility with other legal CB users. The trade-off is that there are more controls to understand, and more modes do not create more range by themselves. ## AM FM CB Rules in the UK CB radio is licence-exempt in the UK when used with compliant equipment and within the permitted technical conditions. The relevant detail matters. UK FM channels, commonly called the UK 27/81 band, are not the same as the European CEPT channels, and not every mode is authorised across every channel allocation. A proper UK-market multimode radio is designed to cover the permitted band plans and power levels for legal operation. It may offer UK FM channels alongside CEPT channels with FM, AM and, on suitable models, SSB. The channel display and band selection can look confusing at first, especially where a set provides several country settings. Do not assume that a country mode is suitable simply because the radio lets you select it. For ordinary vehicle use, stick to the UK settings and legal modes supplied for the equipment. If you are unsure which band is appropriate, check the radio manual and the current [UK licence-exemption requirements](https://cbradio.co.uk/cb-radio-legal-guide-uk/) before transmitting. This is particularly relevant with imported sets, modified radios and older equipment. A radio that physically transmits outside the permitted CB allocation is not made lawful by keeping the power turned down. Power limits also apply. Standard FM and AM CB operation is typically limited to 4 watts carrier power, while legal SSB operation has a higher peak envelope power allowance. A linear amplifier may be tempting when hills, trees or a large convoy get in the way, but it is not a simple route to legal, dependable communication. More power can cause interference, expose poor installation work and put you outside the conditions that apply to licence-exempt CB use. ## The Aerial Does the Real Work Spend time choosing and fitting the aerial before spending extra on radio features. A modest AM FM CB radio with a correctly installed, tuned aerial will normally outperform an expensive set connected to a poorly mounted whip. For a mobile installation, the vehicle body often forms part of the aerial system. A solid metal mount on a suitable part of the vehicle can provide a better ground plane than a convenient but isolated mounting point. This is why a roof mount often works well, although it is not always practical on a lifted 4×4, a vehicle with roof equipment or a lorry that regularly meets low branches and height barriers. A gutter mount, wing mount, mirror bracket or heavy-duty rear mount can all work well when fitted properly. What matters is secure fixing, good electrical continuity where required, a sensible position away from obstructions and a cable run that is not crushed, pinched or full of sharp bends. Fibreglass-bodied vehicles and vehicles with extensive plastic trim need particular care because they may not provide the same ground plane as a steel roof. Every new CB aerial should be checked with an [SWR meter](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/) before regular transmitting. SWR, or standing wave ratio, tells you how well the aerial system is matched to the radio. A poor reading can reduce transmitted performance and, in severe cases, strain the radio’s output stage. Do not tune an aerial by cutting it repeatedly at random. Take readings, make small adjustments and retest. If the reading will not improve, inspect the mount, earth connection, coaxial cable and connector before blaming the aerial. ## Choosing the Right Radio for the Job The right AM FM CB depends on where and how you use it. A compact unit is often the best answer for a modern cab with limited dash space. It can be tucked into a console, mounted under a seat or fitted on a purpose-made bracket, provided the microphone and controls remain safe to use. For regular off-road groups, look for clear controls, a strong front-facing speaker or extension-speaker socket, easy channel changes and a microphone that is comfortable with gloves on. A backlit display is useful at night, but a screen full of small menu options is not always an advantage when you are bouncing along a rough track. For lorry drivers and long-distance road users, noise reduction, a sensible squelch control and reliable microphone audio are often more valuable than a long feature list. Set the squelch too high and you will miss weaker calls. Leave it fully open and you may listen to constant background hiss. Adjust it just beyond the point where the noise disappears, then revisit it as conditions change. Homebase users have different priorities. A mains power supply, an external base antenna and good-quality coax can make a major difference, but a fixed station still needs to comply with the same permitted frequencies and technical requirements. A high antenna may hear much further than a vehicle installation, yet that does not guarantee that a mobile station can return the call. CB is always a two-way path. ### Useful Features Without the Gimmicks A channel scan function can help you find activity, and a signal meter gives a rough indication of received strength. ANL or noise-limiting functions may reduce some ignition and electrical interference, though they cannot cure a noisy vehicle installation on their own. An extension speaker is one of the most worthwhile additions in a loud cab. Mount it where speech is clear but it will not become a hazard in an emergency stop. A better microphone can improve transmitted audio too, although it should be correctly wired for the radio. Microphone plugs and [pin layouts](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/) are not universal, so never assume a plug that fits is wired correctly. ## Installation Faults That Cause Most Problems Many reported CB faults are installation faults. The radio may power up perfectly but perform badly because the aerial system has not been checked. Likewise, a crackling signal can be caused by a loose PL-259 plug, water in a connector, damaged coax or an aerial mount with poor contact to the vehicle. Take the power feed directly from a suitable fused supply and use cable sized for the radio’s current draw. Avoid sharing a poor earth point with noisy accessories where possible. If you hear alternator whine, injector noise or interference from LED lighting, work methodically. Check the radio earth, aerial mount and power routing first, then isolate accessories one at a time. Ferrite suppression can help in some cases, but it should not be used to hide a fundamentally poor connection. Keep the microphone lead clear of the steering wheel, pedals, gear lever and airbag areas. A CB should support safer communication, not create a distraction. Agree a calling channel with your group before setting off, use short messages and leave gaps for other stations to reply. A simple call such as “Vehicle three, gate ahead” is more useful than a running commentary. ## Make the Set Fit Your Actual Use There is no single best AM FM CB radio for every driver. A weekend 4×4 owner may be better served by a compact, legal multimode set and a flexible aerial that survives branches. A transport operator may prioritise a loud speaker, dependable mounting and easy controls. A homebase enthusiast may put more budget into the antenna system than the radio body itself. CB Radio UK can help with the practical parts that are easy to overlook, from selecting a suitable aerial and mount to finding the correct microphone wiring or replacement connector. Ask the question before ordering if the vehicle, existing antenna or intended use is unusual. The best result is rarely the radio with the most buttons. Choose a compliant AM FM CB set that suits your contacts, fit an aerial properly, check the SWR and practise using the controls before the convoy starts moving. When you need a quick warning, a route check or a call for assistance beyond mobile signal, that preparation is what makes the radio worth having. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20AM%20FM%20CB%20Radios%3A%20What%20UK%20Drivers%20Need%20to%20Know&body=https%3A%2F%2Fcbradio.co.uk%2Fam-fm-cb-radios-uk-drivers%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/?share=telegram) - **Categories:** Uncategorised --- ### [How to Select CB Microphone for Your Radio](https://cbradio.co.uk/how-to-select-cb-microphone/) **Published:** August 20, 2026 **Author:** **Excerpt:** Learn how to select CB microphone equipment for UK mobile or homebase use, from connector wiring and compatibility to controls, comfort and durability. **Content:** A replacement microphone can make an otherwise good CB radio frustrating to use – or transform it into a much more practical setup. If you are working out **how to select CB microphone** equipment, start with the radio itself, not the microphone’s appearance. A smart-looking power mic with the wrong wiring will not work correctly, while a basic compatible mic can give years of reliable service. For a 4×4, car, lorry or homebase station, the right choice comes down to compatibility, how and where you use the radio, and whether you genuinely need extra features. The most expensive option is not automatically the best one. ## Check compatibility before anything else A CB microphone is not a universal accessory. Two microphones may have the same style of plug and the same number of pins, yet be wired differently. Connecting the wrong one can leave you unable to transmit, with no audio, constant transmit, or controls that do not operate as intended. Check the make and exact model of your CB radio first. Then confirm the microphone plug type, number of pins and wiring arrangement specified for that radio. Four-pin, five-pin, six-pin and multi-pin plugs are all common, but pin count alone does not prove compatibility. The arrangement of audio, transmit, receive and any channel-control connections matters just as much. This is particularly relevant when buying a second-hand microphone, adapting an older radio or fitting an aftermarket model. Some radios use similar connections across a manufacturer’s range, while others do not. Do not rely on photographs or a plug that looks familiar. A proper wiring diagram for both items is the sensible way to check. If your radio has channel up/down buttons on the microphone, make sure the replacement supports that function and is wired for it. A standard microphone may still pass audio and key the transmitter, but you could lose remote channel changing. For an off-road vehicle where the radio is mounted out of reach, that is more than a minor inconvenience. ## Match the microphone to the way you use CB A hand microphone suits most mobile installations. It is familiar, easy to mount beside the driver and available in a wide range of styles. For occasional road use, green-laning trips or convoy work, a straightforward replacement hand mic is often all that is needed. A fist microphone is larger and generally more substantial in the hand. Many users prefer one when wearing gloves, using the radio regularly or operating in a working vehicle. The larger press-to-talk switch can be easier to find without taking your eyes off the road, although the microphone needs a secure clip so it does not swing around the cab. For a [homebase setup](https://cbradio.co.uk/cb-power-supply-for-homebase/), a desk microphone can be more comfortable during longer sessions. It keeps the mic in one place, and some versions provide a larger press-to-talk bar and clearer access to controls. It is less suitable in a vehicle, where a fixed base can take up space and become a nuisance on rough ground. A compact mic may be the better fit where dashboard space is tight. The trade-off is that small controls and a smaller press-to-talk button can be harder to operate when bouncing around on a rutted track. Think about the conditions, not just the space available. ## Standard, amplified or noise-cancelling? The three main microphone types serve different purposes. A standard dynamic microphone is the dependable choice for many CB users. It needs no battery, has no gain control to set and usually gives natural, clear audio when used at a sensible distance from your mouth. For most legal UK CB installations, it is the sensible starting point. An amplified or power microphone includes its own gain stage, normally powered by a battery. It can increase audio level and may help if a radio has low microphone output or you need more adjustment. However, more gain is not the same as better transmitted audio. Set too high, it can cause distortion, background noise and over-modulation. Other stations may hear you as loud but unclear. Power microphones also bring practical considerations. Batteries go flat, switches can be knocked, and the gain control needs setting carefully. They are useful when matched to the right radio and set up properly, but they are not a cure for poor aerial tuning, a faulty coax lead or weak transmit performance elsewhere in the installation. Noise-cancelling microphones are designed to reduce sound away from the user’s voice. They are particularly useful in noisy cabs, soft-top 4x4s, open vehicles, plant machinery or lorries with steady engine and road noise. To work well, they normally need to be held close to your mouth. Hold one at arm’s length like an ordinary mic and your audio can sound quiet or thin. For a quiet car or indoor station, a noise-cancelling model may offer little advantage over a good standard microphone. In a noisy Defender on rough ground, it can make the difference between a usable call and a burst of engine noise. ## How to select a CB microphone with useful controls Extra controls are worthwhile only when they suit your setup. Channel up/down buttons are helpful when the radio is mounted low, in a cubby or behind a seat. A lockable press-to-talk switch can suit some base users, but it is rarely a good idea for general vehicle use, where an accidental continuous transmission can block a channel. Some microphones include a gain or volume-style control. Gain is useful for fine tuning your transmitted audio, but it should be adjusted with care. Ask another station for an honest radio check or use a suitable test setup. The aim is clean, intelligible speech, not maximum loudness. Look at control placement before buying. Buttons that sit where your fingers naturally rest may be convenient, but they can also be pressed by mistake. Raised buttons are easier to use with gloves, while recessed buttons can be better in a busy cab. It depends whether you prioritise quick access or preventing accidental changes. ## Cable length, plug condition and everyday durability Cable length is easy to overlook until the mic barely reaches its clip. Measure the route from the radio to the intended mounting point, allowing enough slack for seat movement and normal driving. Avoid a cable that is stretched tight, but do not fit an excessively long lead that tangles around controls, gear levers or passengers. Coiled leads are popular for mobile use because they retract neatly. A straight lead can be practical for a desk microphone or a fixed homebase position. Whichever style you choose, inspect the strain relief where the cable enters the plug and microphone body. This is a common point of failure, especially in vehicles where the lead is regularly pulled or trapped. The plug deserves the same attention. Bent pins, loose collars and damaged locking rings lead to intermittent faults that are often mistaken for a radio problem. If you are replacing a microphone because transmission cuts in and out when the cable moves, examine the socket and plug before assuming the new mic is the answer. For off-road use, choose a unit with a solid case, a positive press-to-talk switch and a reliable clip. A microphone that falls onto the floor every time the vehicle leans over will not last long. Position the clip where you can reach it easily but where the mic will not interfere with steering, gear changes or recovery equipment. ## Do not try to fix an aerial issue with a microphone A microphone affects the audio you put into the radio. It does not improve the aerial’s efficiency, correct high SWR or extend range on its own. If other users say your voice is distorted, the microphone may be involved. If they say your signal is weak at distance, check the aerial, mount, earth plane where relevant, coax and SWR setting as well. This distinction saves money and avoids chasing the wrong fault. A clean, properly matched aerial system and a standard compatible microphone will usually outperform a badly installed system fitted with a high-gain power mic. ## Before you order Confirm your radio model, connector type, pin count and wiring. Decide whether you need channel controls, then choose between standard, amplified or noise-cancelling audio based on the noise level around you. Finally, check cable length and mounting position in the actual vehicle or shack. If you are uncertain about wiring or whether a particular mic suits your radio, it is better to ask before connecting it. CB Radio UK can help point you towards compatible options, and a quick check now is far easier than diagnosing a non-working installation later. A microphone should feel like part of the radio, not another thing to fight with. Choose one that you can grab, key and speak into naturally, and your next convoy call will be heard for the right reasons. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-select-cb-microphone/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-select-cb-microphone/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-select-cb-microphone/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-select-cb-microphone/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Select%20CB%20Microphone%20for%20Your%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-select-cb-microphone%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-select-cb-microphone/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-select-cb-microphone/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-select-cb-microphone/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio vs Ham for UK Drivers and Hobbyists](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/) **Published:** August 18, 2026 **Author:** **Excerpt:** CB radio vs ham radio explained for UK drivers and hobbyists: compare licences, range, equipment, aerials and the right choice for 4x4 and base use today. **Content:** A convoy disappears over the next ridge, mobile signal drops to nothing, and you still need to speak to the vehicle behind. That is where the **CB radio vs ham** question becomes practical rather than theoretical. Both can be excellent forms of radio communication, but they are built for different users, different distances and different ways of operating. For most 4×4 owners, green-laners, motorists and local hobby users, CB is the straightforward answer. Ham radio opens far more technical possibilities, but it brings a licensing requirement and a different style of hobby. Choosing properly starts with being honest about what you need the radio to do. ## CB radio vs ham radio: the main difference CB, short for Citizens’ Band, is [licence-free in the UK](https://cbradio.co.uk/can-i-use-cb-legally-uk/) when you use legal, type-approved equipment within the permitted frequencies and power limits. It is intended for short-range public communication. Fit a CB set and suitable aerial in your vehicle, tune it correctly, choose an agreed channel and you can talk with others nearby who are using compatible equipment. Amateur radio, commonly called ham radio, is a licensed service. To transmit legally, you must pass an Ofcom amateur radio exam, hold the appropriate licence and use your assigned call sign. The reward is access to a far wider choice of frequency bands, modes and technical activities. Amateur operators may communicate locally, across the UK and, when conditions and equipment allow, around the world. That distinction matters. CB is usually about getting useful communications working without delay. Ham radio is a rewarding hobby in its own right, with more scope to experiment, learn and build a station around your interests. ## When CB radio is the better choice CB remains a solid option because it is simple, familiar and well suited to vehicles. For a group travelling together, it gives every driver a shared channel without requiring everyone to study for a licence first. A properly installed mobile set with a decent aerial is far more dependable than shouting out of a window or relying on patchy mobile coverage. It is especially useful for 4×4 runs, car clubs, farm and estate work, site movements, organised road trips and general local chat. A handheld can have its place for short-distance use, but a vehicle-mounted CB with an external aerial will normally offer the stronger, more consistent signal. CB is also a practical first radio for anyone who wants to understand aerial placement, SWR, power connections and radio etiquette. You can start with a straightforward FM set and magnetic-mount aerial, then improve the installation over time. The equipment is generally more affordable than a full amateur station, and there is no need to obtain an individual transmitting licence. That does not mean CB is a guaranteed long-range system. Hills, trees, buildings, weather and the electrical noise produced by modern vehicles can all affect performance. The aerial, its mounting position and correct tuning often make a bigger difference than choosing a radio with extra buttons. ### CB for off-road and convoy use For close-to-medium-range communication between vehicles, CB is difficult to beat for simplicity. Drivers can warn the group about a gate, a sharp descent, an oncoming vehicle or a missed turning without stopping to make a phone call. It also keeps the conversation available to the whole group, rather than splitting information across separate calls. Agree the channel before setting off, keep messages brief and avoid transmitting over someone else. If a convoy is spread out, place an experienced operator towards the rear so the lead vehicle can be relayed if needed. That is often more effective than expecting one radio to cover every bend and valley. ## When ham radio makes more sense Ham radio is the better route if radio itself is the hobby, not simply the tool. It suits people who enjoy learning how propagation works, trying different aerial designs, operating from home, joining clubs, making contacts in distant places and experimenting with digital modes. The amateur bands offer far more variety than CB. Depending on the licence level, equipment and band conditions, an amateur operator can use VHF and UHF for local contacts or use HF bands for much greater distances. Some operators enjoy portable hilltop stations, others prefer a homebase set-up, and many combine the two. The extra freedom comes with responsibility. Amateur radio operators are expected to understand the terms of their licence, identify using their call sign and operate within the privileges of their licence level. It is not a replacement for a group CB channel where unlicensed friends can simply pick up a microphone and join in. Anyone transmitting on amateur frequencies needs the appropriate licence. For an off-road user who is already keen on radio, a dual-band amateur mobile set can be a worthwhile addition. It can offer access to local repeaters and amateur nets, particularly where other licensed operators are active. But it is not automatically the best radio for a mixed convoy. If only one or two people are licensed, CB is still the sensible common system. ## Range: do not choose on big claims The most common mistake in comparing CB and ham radio is asking which one has the most range. There is no single answer. At vehicle level, both systems are affected by terrain, aerial height, power, local interference and the band being used. Two vehicles in open country may communicate comfortably over several miles, while the same vehicles in wooded lanes or behind hills may struggle at a much shorter distance. Aerial height and a clear view between stations are valuable on any radio band. Ham radio has greater potential for long-distance communication because it gives licensed operators access to more bands and operating methods. On the right HF band, with suitable conditions, very long-distance contacts are possible. That is not the same as saying every amateur mobile radio will outperform every CB installation in day-to-day use. For a 4×4 convoy, a well-fitted CB with a correctly tuned aerial is usually the more relevant comparison. For an operator wanting to contact a local repeater, speak to an amateur club or explore worldwide radio, ham radio has the advantage. ## Equipment and installation matter more than most people expect A cheap radio paired with a poor aerial installation is a false economy. On CB, the aerial is a major part of the system. It needs suitable mounting, a [sound earth arrangement](https://cbradio.co.uk/how-to-ground-cb-antenna/) where required, quality coax and an [SWR check](https://cbradio.co.uk/how-to-use-an-swr-meter/) before regular use. High SWR can reduce performance and may damage a transmitter if ignored. A magnetic mount is convenient for occasional use, provided it is placed on a suitable metal surface and the cable is routed carefully. Permanent mounts are usually neater and can provide a more dependable installation, but they require more commitment to the vehicle. Taller aerials can improve performance, yet they need sensible placement and may not suit low car parks, wooded tracks or daily driving. Ham installations deserve the same care. A VHF or UHF mobile aerial must be matched to the band in use, while HF mobile installations are more demanding and usually need more space, more attention to bonding and a realistic view of what can be achieved from a vehicle. It is also worth thinking about the radio controls. A compact CB with clear channel controls may be ideal in a working vehicle. An amateur transceiver with menus, memory channels and multiple bands can be excellent, but only if you are comfortable using it safely while parked or with a passenger operating it. ## Cost, learning and the right starting point CB has the lower barrier to entry. A basic mobile radio, aerial, mount, coax, power lead and SWR meter or checking service will get most users moving in the right direction. You can keep the set-up simple or choose a more feature-rich radio with functions such as SSB, depending on the legal mode and channels you intend to use. Ham radio can be inexpensive at entry level, particularly for local VHF and UHF operation, but costs can rise as ambitions grow. A homebase HF station may involve a radio, power supply, feeder, aerial system, mounting hardware and test equipment. The learning is part of the enjoyment for many operators, but it should be seen as part of the purchase decision. If your main requirement is talking between vehicles, do not buy an amateur radio simply because it sounds more powerful or advanced. If you want to become involved in amateur radio, take the Foundation course and licence seriously, then choose equipment that matches where and how you will operate. ## A practical choice for UK users Choose CB if you want accessible, shared communications for vehicles, local use or off-road groups. It is the logical system when several people need to talk without each needing a licence. Put the budget into a good aerial installation and proper SWR tuning before chasing extra features. Choose ham radio if you are ready to gain a licence and want radio to become a deeper technical hobby. It offers more bands, more operating options and much greater long-distance potential, but it also asks more of the operator. Many enthusiasts end up with both. A CB set handles the simple, everyday job of keeping a group together, while amateur equipment offers a separate hobby with more room to learn. If you are unsure where to start, CB Radio UK can help match a radio, aerial and mounting method to the vehicle and the way you actually plan to use it. A radio is only as useful as the installation behind it, so choose the system that your fellow users can operate and take the time to fit it properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20vs%20Ham%20for%20UK%20Drivers%20and%20Hobbyists&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-vs-ham-uk-drivers-hobbyists%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/?share=telegram) - **Categories:** Uncategorised --- ### [Magnetic Versus Fixed CB Aerial for Your Vehicle](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/) **Published:** August 16, 2026 **Author:** **Excerpt:** Compare magnetic versus fixed CB aerial options for fitting, performance, security and everyday use, then choose the right setup for your vehicle properly. **Content:** A CB set can be perfectly capable, but its aerial installation decides how well it actually performs. The magnetic versus fixed CB aerial question comes up whenever a driver wants dependable communication without making the wrong commitment to their vehicle. For some, a mag mount is the sensible answer. For others, a properly installed fixed aerial is worth the drilling and effort. The right choice depends less on which type is labelled “best” and more on how you use the vehicle. A weekend green-laner, a lorry driver, a 4×4 owner with roof bars, and someone fitting a CB to a leased daily driver all have different priorities. Think about where the aerial can sit, how often it will be removed, how exposed it will be to branches or theft, and whether you are happy to make a permanent fitting. ## Magnetic versus fixed CB aerial: the practical difference A magnetic CB aerial uses a strong magnet to hold the mount to a steel body panel, usually the roof. The coaxial cable runs from the mount into the cab, often through a door opening, tailgate gap, or another suitable entry point. It can be fitted in minutes and removed just as quickly. A fixed aerial uses a permanent mount attached to the vehicle. This may be a drilled roof mount, gutter mount, wing mount, mirror bracket, spare-wheel carrier bracket, or a heavy-duty fitting on a 4×4 accessory. The aerial screws or bolts onto that mount, with the cable routed into the vehicle more permanently. Neither design automatically guarantees better range. A good-quality magnetic mount placed centrally on a steel roof can work extremely well. Equally, a fixed aerial installed low down on a poorly bonded bracket may underperform despite the extra work involved. The aerial length, location, ground plane, cable condition and SWR set-up all matter. ## When a magnetic mount makes sense A [magnetic aerial](https://cbradio.co.uk/product/cb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission/) is the straightforward option if you need a removable installation. It suits leased vehicles, cars you may sell soon, occasional convoy use, hire vehicles where permitted, and anyone trying CB for the first time before committing to a permanent mount. Roof placement is one of its biggest advantages. The centre of a steel roof gives an aerial a useful, even ground plane and keeps it clear of much of the vehicle body. This usually produces a more balanced radiation pattern than an aerial tucked down on a bumper or side bracket. For everyday road use, that can be a very effective set-up. It is also handy where one aerial needs to serve more than one vehicle. You can move the mount, radio and power lead between vehicles, provided the aerial is rechecked and the installation is safe each time. For a family 4×4 used at weekends and a car used during the week, that flexibility can be useful. There are compromises. The cable can be the weak point if it is repeatedly trapped in a door seal or tailgate. A light pinch is often manageable, but a sharp edge, constant crushing or water ingress will eventually damage the coax. Route it carefully, avoid tight kinks, and inspect it regularly. Magnetic mounts also need a clean contact surface. Dirt, trapped grit and moisture beneath the base can mark paintwork over time, particularly if the aerial is left in one place for months. Clean and dry both the roof and the mount before fitting. Removing the aerial when it is not needed is sensible, especially before a car wash or long periods parked on the street. A mag mount is not ideal for every body type. Aluminium panels, fibreglass roofs, plastic panels and many roof-mounted accessories will not hold a magnet. Some modern vehicles have limited steel in the useful areas, so check before ordering rather than assuming the roof is suitable. ## Why fixed aerial mounts suit serious users A fixed installation is generally the better long-term choice for a vehicle that carries CB equipment regularly. It is more secure, tidier and better able to cope with sustained motorway use, weather and off-road vibration. There is no cable crossing a door aperture, no magnetic base to remove, and no need to refit the aerial before every trip. For 4×4 and off-road users, fixed mounts offer more choice over aerial position. A bracket on a rear carrier, bonnet hinge, wing, roof rack or purpose-built mount can keep the aerial clear of a roof tent, light bar or load. A spring base can also help an aerial flex when meeting low branches, although it is not a cure for striking solid obstacles at speed. A drilled roof mount is often the neatest and most effective permanent option, because it places the aerial high and gives it a good metal ground plane. It does require confidence, accurate measurement and proper sealing. Done badly, a hole in the roof can lead to leaks, corrosion and a frustrating repair. Done properly with the correct mount and cable routing, it is a professional, durable solution. Bracket-mounted aerials avoid drilling the roof, but their electrical performance needs more thought. A bracket fixed to painted metal, a powder-coated rack or a spare-wheel carrier may not provide a good RF earth by itself. The mount may need a short bonding strap to bare vehicle metal. This is particularly relevant on 4x4s with separate panels, hinges, aftermarket bumpers and removable body parts. Security is another reason to choose fixed. A magnetic aerial can be lifted off in seconds. A fixed aerial is not theft-proof, but it is less convenient to take. Many fixed aerials can still be unscrewed when parking under low barriers or leaving the vehicle unattended, while the mount stays in place. ## Performance is about installation, not just the mount The most common mistake is treating the mount type as the whole decision. The aerial system must be correctly matched to the CB radio. Check the standing wave ratio, or SWR, once the aerial is fitted in its intended position. Do not tune an aerial while holding it in a different place, then expect the same result after moving it to the vehicle. A low SWR helps the radio transfer power efficiently into the aerial. A high SWR can reduce performance and, in severe cases, risk damage to the radio’s output stage. If the reading is poor, do not simply keep trimming the whip. First check the mount, cable, connector, earth arrangement and aerial placement. With a magnetic mount, the metal roof beneath the base forms part of the system. With a fixed installation, the mount must have the right electrical arrangement for the aerial type. Some antennas are designed around a conventional metal ground plane, while no-ground-plane models are intended for installations such as fibreglass bodies or certain non-metallic mounting positions. Using the wrong type can produce disappointing results even if the radio itself is sound. Aerial height also has practical limits. A taller whip may improve your chances of getting over nearby vehicles or rough ground, but it can catch on branches, car park barriers and garage entrances. For a road vehicle, the best aerial is often the one that is high enough to work well and tough enough to stay fitted. ## Choosing for your vehicle and use If you are fitting a CB mainly for occasional road trips, events, pay-and-play days or convoy runs, a good magnetic mount is hard to argue with. It is quick, cost-effective and lets you place the aerial in a useful position on a steel roof. Treat the cable and paintwork with care, and remove it when it is not required. If the CB is staying in a working vehicle, expedition 4×4, regular green-laning vehicle or lorry, a fixed mount usually pays off. You gain a cleaner installation, better long-term durability and more freedom to choose an aerial position that works around the rest of the vehicle. There is a middle ground too. A fixed bracket can give a removable aerial without drilling the roof, while a magnetic mount can be left in place for an entire trip. The choice is not simply temporary versus permanent. It is about the compromise you are happiest to make between convenience, appearance, security and performance. Before buying, check four things: whether the intended panel is steel, where the cable will enter the cab, whether the chosen aerial needs a ground plane, and the total vehicle height once fitted. Those checks prevent most of the expensive and annoying mistakes. A properly matched aerial, sound coax and a careful SWR check will do more for your CB than choosing a mount on appearance alone. If you are unsure which fitting suits your vehicle, take a look at the mounting area first, then get in touch with the vehicle details and planned use. A few minutes spent choosing the right aerial arrangement is far better than trying to cure poor performance after it is fitted. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Magnetic%20Versus%20Fixed%20CB%20Aerial%20for%20Your%20Vehicle&body=https%3A%2F%2Fcbradio.co.uk%2Fmagnetic-versus-fixed-cb-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/?share=telegram) - **Categories:** Uncategorised --- ### [CB Squelch Adjustment for Clearer Mobile Calls](https://cbradio.co.uk/cb-squelch-adjustment/) **Published:** August 14, 2026 **Author:** **Excerpt:** Set your CB squelch adjustment correctly to cut background hiss without missing weak calls on the road, off-road trails or from your homebase station now. **Content:** A CB radio that hisses constantly is distracting, especially when you are driving, following a green lane, or waiting for a mate to call from the next vehicle. A proper **CB squelch adjustment** removes that unwanted background noise when nobody is transmitting, while still allowing genuine calls through. Set it too low and you hear every burst of static. Set it too high and weaker stations disappear altogether. The right setting is not a fixed number on the dial. It depends on where you are, the aerial installation, local electrical interference and the strength of the stations you need to hear. That is why a quick adjustment before a convoy run or a long motorway journey is worth doing. ## What the squelch control actually does Squelch is a noise gate. Your CB receiver is always listening to the selected channel, including for weak radio noise that has no useful message in it. The squelch control tells the radio how strong a received signal must be before it opens the speaker. With the squelch fully anti-clockwise, the gate is open all the time. You will hear hiss, ignition noise, distant signals and any other background interference picked up by the aerial. Turning the control clockwise raises the threshold. Once it is set above the prevailing noise level, the speaker falls quiet until a signal strong enough to clear that threshold arrives. It does not make your CB transmit further, increase receiver sensitivity or cure a poorly matched aerial. It simply decides what you hear. That distinction matters: if a radio is quiet because the squelch is over-tightened, it can look as though nobody is using the channel when calls are actually being missed. ### Squelch is not RF gain Some CB radios have an RF gain control as well as squelch. They do different jobs. RF gain reduces the strength of signals entering the receiver. It can be useful in a very busy area where strong nearby stations are overloading the receiver, but turning it down will also weaken wanted calls. Squelch leaves the received signal level alone and mutes the speaker below a chosen level. For normal mobile use, leave RF gain fully clockwise unless your radio manual advises otherwise, then set squelch to suit the conditions. ## How to set CB squelch adjustment correctly Start on the channel you intend to use. If you are travelling with a group, make sure everyone has agreed the same channel and mode before setting off. A quiet channel is easiest for adjustment, but you also need to account for the actual noise level in the area where you will be using the radio. Turn the volume to a comfortable level first. Then turn the squelch fully anti-clockwise until you can hear the background hiss. Slowly turn it clockwise. The moment the hiss just disappears, stop. That is the basic setting. It is usually the best starting point for a vehicle-to-vehicle group where you do not want to miss a weaker call from the back of the convoy. If the radio keeps opening on random bursts of noise, move the control a fraction further clockwise. Avoid winding it up until the radio seems completely dead, as that often blocks the very stations you wanted to hear. If possible, ask another user to make a few test transmissions from a realistic distance. A handheld radio standing beside your vehicle is not a useful test of how the setup will work half a mile down a wooded track or behind a line of hills. Check that normal speech opens the squelch reliably and that weaker, but still readable, transmissions are not clipped at the start. On many modern CB sets, the control may be a button and menu setting rather than a traditional knob. The principle remains exactly the same: lower the threshold until background noise is present, then raise it only enough to silence the noise. Refer to the [radio’s manual](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/) for the button sequence, particularly if it offers both manual and automatic squelch functions. ### A simple roadside test A practical test takes less than a minute. With the engine running and usual vehicle accessories switched on, open the squelch and listen. You may hear alternator whine, electrical clicks, LED light interference or a general rise in hiss. Set the squelch just above this level, then have another vehicle call you from a short distance away. Repeat the check after moving onto the road or trail if conditions change. A setting that is fine at home may be too low near power lines or a town centre, while a setting that is too high in open countryside can hide distant but usable calls. ## Manual versus automatic squelch Automatic squelch, often marked ASQ, is convenient. The radio monitors the noise level and chooses a threshold for you. For day-to-day driving, it can save time and keep the speaker quiet without constant adjustment. It is especially useful for newer users who simply want to fit a CB kit, select their channel and get on with the journey. Manual squelch gives more control. Off-road users often prefer it because conditions can change quickly, and a manually set low threshold may let through a weak call that automatic squelch decides is not strong enough. If your group is spread out, running through valleys or separated by terrain, that extra margin can be valuable. Neither option is automatically better. Automatic squelch suits convenience and variable urban noise. Manual squelch is often the better choice when hearing the weakest possible useful traffic matters. Try both on your own radio before relying on it for a trip. ## Why a good setting changes from place to place CB reception is affected by more than distance. Aerial height and position, grounding, terrain, weather conditions, nearby vehicles and local interference all play a part. A roof-mounted aerial on a well-installed mobile setup will generally give a cleaner, stronger signal than a temporary aerial mounted in a poor position, but even a good installation will encounter changing noise levels. In a built-up area, electrical interference may cause the squelch to open repeatedly. Raising it slightly can make the radio more pleasant to use. On open moorland or during a quiet overnight drive, the background may be low enough that you can run a looser setting and hear distant activity. For 4×4 and green-lane groups, do not assume every vehicle receives equally. A driver at the rear may have a shorter aerial, a lower vehicle, poor grounding or simply be behind a ridge. Keeping squelch conservative across the group helps prevent missed instructions about gates, hazards, recovery stops or route changes. ## Common mistakes that make a CB seem faulty The most common error is treating squelch as a volume control. If you turn it clockwise because the radio is too loud, you may mute weaker stations instead of reducing the listening level. Use the volume knob for loudness and the squelch control only to remove noise between transmissions. Another mistake is setting it while parked with the engine off, then expecting the same result while driving. Vehicle electrical noise may be much more noticeable once the engine is running. Check it under normal operating conditions. Also, do not use squelch to hide a persistent interference problem. If the radio opens constantly even with the squelch set higher than normal, [investigate the cause](https://cbradio.co.uk/how-to-reduce-cb-interference/). LED work lights, mobile phone chargers, dash cameras, poor power connections and ignition components can all produce noise. Moving the aerial lead, improving power wiring or switching accessories off one at a time can help identify the source. Aerial issues need addressing separately. High SWR, a damaged coax lead, loose connector or unsuitable mounting point can reduce transmit and receive performance. Tightening the squelch may make the radio quieter, but it will not repair the installation. A [correctly tuned aerial](https://cbradio.co.uk/what-is-the-best-cb-radio-setup/) and sound connections are the foundation of useful CB communication. ## When to adjust it during a journey You should not need to constantly chase the squelch control, but there are times when a small adjustment makes sense. Raise it a touch when entering a noisy industrial area or fitting motorway services where interference is causing repeated openings. Loosen it before a convoy spreads out, enters wooded ground or drops into valleys where signals may become weaker. If someone reports that they can hear you but you cannot hear them, first ask them to give a longer test call. Then reduce squelch slightly. Check the volume and RF gain too, but avoid changing several controls at once or you will not know which alteration solved the issue. For a homebase station, use the same method but allow for the fact that a higher aerial may receive more distant noise and signals. A very tight setting can make a base station seem quiet and tidy, yet it can also remove interesting local or distant traffic that is perfectly readable once the squelch opens. A well-set CB should stay quiet when the channel is idle and open promptly when somebody needs you. Set it just above the noise, test it with the people you travel with, and give it another quick check whenever the conditions change. That small habit makes a radio far more useful when the call actually matters. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-squelch-adjustment/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-squelch-adjustment/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-squelch-adjustment/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-squelch-adjustment/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Squelch%20Adjustment%20for%20Clearer%20Mobile%20Calls&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-squelch-adjustment%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-squelch-adjustment/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-squelch-adjustment/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-squelch-adjustment/?share=telegram) - **Categories:** Uncategorised --- ### [Are CB Amplifiers Legal UK? The Straight Answer](https://cbradio.co.uk/are-cb-amplifiers-legal-uk/) **Published:** August 12, 2026 **Author:** **Excerpt:** Are CB amplifiers legal UK? Learn why linear amps usually take a CB station outside legal limits, and what to use for a clearer, reliable signal instead. **Content:** A 4×4 convoy disappears over the next ridge, the lane gets rougher and your mate’s signal starts fading. It is easy to think a linear amplifier is the obvious fix. But if you are asking **are CB amplifiers legal UK**, the useful answer is not simply whether one can be bought. It is whether it can lawfully be used with your CB set on the bands and power levels permitted in the UK. For normal CB operation, fitting an external RF amplifier will almost always put the station outside the licence-exempt rules. That can turn a practical communications upgrade into a source of interference, complaints and possible Ofcom enforcement. Better range is possible, but it normally begins with the aerial system rather than more watts. ## Are CB amplifiers legal in the UK? A CB linear amplifier is not automatically illegal merely because it exists. Equipment may be sold, owned or used for purposes that do not involve transmitting on UK CB frequencies. The key issue is its use. UK CB radio is licence-exempt only when the equipment and operation meet the relevant technical conditions. Those conditions include the permitted frequency bands, approved modes and maximum transmitter power. An external linear amplifier increases the output power of a CB radio beyond those limits, so the station no longer qualifies for licence-exempt operation. In plain terms, you cannot lawfully add a linear to a standard UK CB installation and use it to transmit further. A radio being labelled 4-watt, 12-watt PEP or multi-mode does not create permission to add another power stage after it. The measured output at the aerial connection is what matters. This distinction matters for anyone browsing amplifiers. A product description may state input range, output capability and frequency coverage, but that does not mean every possible installation is legal for UK CB use. It is the operator’s responsibility to ensure that the complete station complies. ## Why CB power limits exist CB is a shared, short-range service. It has to work for green-lane groups, local users, farmers, motorists and homebase operators without one high-power station dominating everyone else nearby. Power limits are part of that arrangement. More power can make a strong nearby signal much stronger, but it does not fix every reason a weak station cannot be heard. Hills, buildings, woodland, vehicle bodywork, electrical noise and a poorly mounted aerial can all have a bigger effect than a modest increase in transmitter output. An amplifier can also create unwanted emissions if it is driven too hard, poorly matched or connected to an unsuitable aerial system. Those emissions can spread beyond the wanted CB channel and affect other radio services. Even where the operator thinks they are only trying to reach the rest of the group, a dirty signal can cause problems well beyond the trail or campsite. There is a practical point too. A high-power unit needs a suitable power supply, sound earth arrangements, heavy enough cabling and ventilation. In a vehicle, it adds current draw, heat and installation complexity. It is not a fit-and-forget answer. ## What is legal for UK CB use? The exact technical rules differ according to the CB band and mode in use, so it is worth checking the current Ofcom requirements for the equipment you intend to run. As a working guide, legal CB use means using a compliant radio on its authorised frequencies and modes, at no more than the permitted power level, with no external RF power amplifier added. [Modern UK CB sets](https://cbradio.co.uk/product/president-george-2-multimode-cb-radio/) commonly cover the UK 27/81 channels and the European CEPT channels. FM, AM and SSB permissions and power limits are not identical across every allocation, which is why a proper multi-mode radio should be used exactly as specified by its manufacturer. Do not assume that a radio capable of SSB automatically permits arbitrary power levels, or that settings intended for another country are valid here. Aerial choice is generally much less restrictive, provided the installation is safe and does not cause interference. This is where most mobile stations gain the most useful improvement. A correctly installed aerial can make a legal radio sound noticeably better at both ends of the contact. ## Better CB range without an amplifier Before spending money on extra power, look at the parts of the station that actually get the RF out of the vehicle. A well-set-up 4-watt CB can outperform a badly installed higher-powered set every time. ### Start with the aerial position For a mobile installation, height and a clear view around the aerial matter. The roof is usually the best place because the metal body provides a more even ground plane and the aerial is less shielded by the vehicle. A centre-roof mount is often the strongest all-round choice, although it may not suit every 4×4, pickup or working vehicle. A wing, bumper, spare-wheel carrier or roof-rack mount can work, but each involves compromises. The aerial may become directional because of the vehicle body, and the mount must have a sound electrical connection where a ground-plane aerial requires one. On fibreglass, plastic or aluminium panels, do not assume the vehicle provides the earth plane a conventional whip needs. For off-road use, choose an aerial that suits the vehicle and the terrain. A very tall whip may give excellent performance but be vulnerable under low branches. A shorter, flexible aerial can be the sensible option for regular woodland lanes, provided it is correctly matched and realistically expected to give less reach. ### Check SWR before transmitting hard Standing wave ratio, usually called SWR, is not an optional technical extra. It tells you whether the aerial system is presenting a sensible match to the radio. A high SWR can reduce transmitted signal, stress the radio’s output stage and make an amplifier even more troublesome. Use an [SWR meter](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/) or a suitable analyser when fitting a new aerial, moving its mounting position or changing coax. Test it in an open area, away from buildings and other vehicles where possible. If the reading is high, stop and investigate the mount, earth bonding, coax plugs, aerial length and any damage before treating it as a radio fault. Do not trim an aerial at random. Measure first, make small adjustments and re-test. Some no-ground-plane aerials and pre-tuned designs have different fitting requirements, so follow the supplied guidance. ### Deal with noise and weak receive Range is a two-way job. If your vehicle is full of alternator whine, LED-light interference or ignition noise, you may not hear a reply even if your outgoing signal is strong. Check power connections, bonding straps, aerial routing and accessory wiring. Try the radio with noisy accessories switched off to identify the culprit. A decent extension speaker can make voice traffic easier to understand in a noisy cab. So can sensible squelch and RF gain settings. Do not wind the squelch up so far that weaker but usable calls vanish, especially when the convoy is spread out. ### Match the radio to the job For short vehicle-to-vehicle work, a legal FM CB setup with a good aerial is often all that is needed. For wider-area hobby use, an approved SSB-capable CB radio may offer useful advantages when conditions and the other station’s equipment suit it. It still has to remain within the relevant legal limits. If your real requirement is reliable communication across long distances, through deep valleys or between vehicles operating miles apart, CB may simply not be the right service. A network radio, PMR solution, amateur radio where appropriately licensed, or a satellite-based option may be more suitable. Choosing the right tool is safer and more dependable than trying to force a CB station beyond its permitted operating conditions. ## Can a linear amplifier ever be appropriate? Linear amplifiers have legitimate technical uses in radio, but legality depends on the band, the licence held, the station conditions and the equipment being used. That is a different question from CB operation. For example, a licensed amateur operator may use transmitting equipment within the privileges and conditions of their amateur licence. That does not make an amplifier suitable for CB channels, and it does not allow an unlicensed user to transmit wherever they choose. Frequency allocation, licence terms and technical compliance still apply. It is also worth being cautious with second-hand equipment and online claims. Terms such as “for export”, “10 metre” or “CB compatible” are not a legal exemption. If an item is intended to raise CB transmit power above the allowed limit, do not fit it to a UK CB station. For a straightforward legal setup, focus on a compliant radio, a properly chosen aerial, quality coax and [careful installation](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/). If you are unsure whether a particular radio, aerial or accessory suits your vehicle, CB Radio UK can help you work through the practical options before you buy. A clean, well-matched signal is the upgrade that keeps working long after the novelty of extra watts has worn off. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/are-cb-amplifiers-legal-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/are-cb-amplifiers-legal-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/are-cb-amplifiers-legal-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/are-cb-amplifiers-legal-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Are%20CB%20Amplifiers%20Legal%20UK%3F%20The%20Straight%20Answer&body=https%3A%2F%2Fcbradio.co.uk%2Fare-cb-amplifiers-legal-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/are-cb-amplifiers-legal-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/are-cb-amplifiers-legal-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/are-cb-amplifiers-legal-uk/?share=telegram) - **Categories:** Uncategorised --- ### [CB Accessories That Make Your Radio Work Better](https://cbradio.co.uk/cb-accessories-that-make-your-radio-work-better/) **Published:** August 10, 2026 **Author:** **Excerpt:** Choose CB accessories that suit your radio, vehicle and use. From aerial mounts to microphones and speakers, build a clearer, dependable CB setup today. **Content:** A CB radio can be perfectly good on the bench yet disappointing once it is fitted in a vehicle. More often than not, the issue is not the radio itself. The right **CB accessories** determine how well the aerial performs, how clearly you can hear calls over road noise, and whether the installation remains reliable after a wet green lane or a long motorway run. For a first setup, it is tempting to buy every add-on at once. A better approach is to start with the parts that affect performance and safety, then add the convenience items that suit how and where you use your radio. A 4×4 used in a convoy has different needs from a lorry cab, a classic car or a homebase station. ## Start with the aerial system The aerial, mount and coaxial cable work as one system. This is the area worth getting right before spending money on microphones, speakers or amplifiers. A well-installed basic aerial will usually give more useful results than an expensive radio connected to a poor aerial setup. Choose an aerial length and mounting position that suit the vehicle. Longer aerials can offer strong performance, but they may not be practical on a daily driver, in low car parks or around wooded lanes. Shorter loaded aerials are tidier and often easier to live with, although they need careful positioning and tuning. For most metal-bodied vehicles, a mount with a sound earth connection is vital. A gutter mount, boot-lip mount, wing mount or drilled body mount can all work well when fitted properly. The right choice depends on the vehicle and how permanent you want the installation to be. Magnetic mounts are useful where drilling is not an option, but the base must sit on a clean metal panel and the cable needs routing carefully to avoid trapped or damaged coax. ### Coax cable and connectors matter Do not overlook the cable between the radio and aerial. Crushed, excessively long, poorly joined or water-damaged coax can cause high SWR readings and reduced performance. Route it away from sharp edges, moving hinges and areas where it may be pinched by a door or tailgate. PL-259 connectors are common on CB installations, but check both ends before ordering parts. Adaptors are handy for compatibility, yet every unnecessary joint introduces another possible weak point. Where possible, use the correct lead and connector rather than building an installation around several adaptors. [An SWR meter](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/) is one of the most worthwhile tools for anyone fitting or changing an aerial. It allows you to check that the aerial is correctly matched before regular use. Running a radio with high SWR can reduce transmitted performance and may place stress on the equipment. Tune the aerial in an open area, away from buildings, other vehicles and overhead obstructions, then recheck it after moving the mount or changing the aerial. ## CB accessories for clearer audio Vehicle cabins are noisy places. Tyres, wind, diesel engines and rattling gear can make an otherwise clear signal difficult to hear. An [extension speaker](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/) is a practical upgrade, particularly in a 4×4, van or lorry where the radio may be mounted low down or away from the driver. Look at the speaker impedance, power rating and lead length, then consider where it will be mounted. A compact speaker close to the driver is normally more useful than a large one hidden under a seat. Avoid placing it where it can be kicked, soaked or obstruct an airbag area. If speech sounds harsh, the answer is not always a more powerful speaker. Radio volume, squelch and RF gain settings may need adjustment first. A replacement microphone can also make daily use easier. Standard dynamic microphones are reliable and familiar, while power microphones can increase audio level on compatible radios. That extra gain is not automatically an advantage. Too much microphone gain can produce distorted, overdriven audio, especially in a noisy cab. Check the plug type and wiring arrangement before choosing a microphone. Similar-looking multi-pin plugs are not necessarily wired the same way. Correct [mic wiring](https://cbradio.co.uk/mic-wiring/) is essential, and using an incompatible microphone can leave you unable to transmit or receive properly. For hands-on users, a microphone extension lead may help with a remote radio location, but keep it to a sensible length and route it securely. ## Power, protection and tidy installation A mobile CB radio needs a stable 12V supply. The cleanest option is often a direct fused connection to the vehicle battery, installed with suitable cable and a fuse close to the battery. This can help reduce electrical interference and avoids overloading an existing accessory circuit. That said, every vehicle is different. A switched feed may be preferable if you do not want the radio left powered when parked. In either case, use correctly rated cable, protect it with grommets where it passes through metalwork, and make solid connections. A loose earth or poor power connection can cause intermittent faults that are frustrating to diagnose later. For homebase use, a regulated power supply is required. Match its current capability to the radio and any permitted accessories in use, allowing a sensible margin rather than running it flat out. Keep the supply ventilated and use a proper fused lead to the radio. Cable ties, cable clips, fuse holders, grommets and mounting brackets may not be exciting purchases, but they make the difference between a setup that looks temporary and one that lasts. In an off-road vehicle especially, vibration will find any unsupported radio, speaker or cable. Secure everything before the first rough track rather than after something comes loose. ## Choose CB accessories around your use There is no single best shopping list. A green-laning group may prioritise a flexible aerial, a tough mount, an extension speaker and a radio bracket that keeps controls within reach. A motorway user may prefer a discreet aerial and clear hands-on microphone arrangement. A homebase operator may put more attention into the power supply, external speaker, antenna feed and weatherproofing where the cable enters the building. Useful additions can include a radio mounting bracket, a quick-release aerial fitting, spare fuses, a protective microphone hanger and a weather cap for an aerial mount when the whip is removed. A scanner or network radio product may suit users who want to monitor other services or communicate beyond normal CB range, but it serves a different purpose from a straightforward vehicle CB installation. Linear amplifiers are another area where it pays to be cautious. They can create heat, require suitable power provision and introduce legal considerations. UK radio use is subject to licence-exempt CB conditions and wider radio regulations, so check the rules that apply to your equipment and intended use before adding transmitting accessories. More power is not a substitute for a correctly tuned aerial system. ## Common mistakes worth avoiding The most common mistake is fitting the aerial wherever it is easiest, without considering the ground plane, cable route or surrounding metalwork. Another is assuming that every poor signal is a radio fault. Check aerial connections, SWR, power wiring and microphone compatibility before replacing the main unit. Avoid cutting an aerial whip at random. Some models are designed to be adjusted by length, while others use a tuning ring or set screw. Follow the aerial’s fitting instructions and make small changes, checking SWR as you go. Also avoid coiling excess coax into a tight bundle behind the dashboard. Use an appropriate cable length where possible and keep the routing neat. Finally, buy for the installation you actually have. A premium aerial mount is no help if it will not fit the roof bars, spare-wheel carrier or bodywork on your vehicle. Measure the available space, identify the radio’s connector type and decide where each item will live before ordering. ## Build a setup you can rely on The best CB accessories are not necessarily the flashiest ones. They are the parts that make the radio easy to use, the aerial safe and properly matched, and the wiring dependable in all weather. Start with a sound aerial system, add clear audio and secure power, then choose the practical extras that suit your vehicle and radio habits. If you are unsure about a mount, microphone wiring or aerial choice, getting specialist advice before fitting is usually quicker and cheaper than correcting a compromised installation afterwards. A well-planned setup will give you clearer communication when the convoy spreads out, the road gets noisy or you simply need the radio to work without fuss. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-accessories-that-make-your-radio-work-better/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-accessories-that-make-your-radio-work-better/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-accessories-that-make-your-radio-work-better/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-accessories-that-make-your-radio-work-better/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Accessories%20That%20Make%20Your%20Radio%20Work%20Better&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-accessories-that-make-your-radio-work-better%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-accessories-that-make-your-radio-work-better/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-accessories-that-make-your-radio-work-better/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-accessories-that-make-your-radio-work-better/?share=telegram) - **Categories:** Uncategorised --- ### [Do CB Radios Need a Licence to Use in the UK?](https://cbradio.co.uk/do-cb-radios-need-a-licence-uk/) **Published:** August 8, 2026 **Author:** **Excerpt:** Do CB radios need a licence in the UK? Get clear advice on licence-exempt sets, legal channels, power limits and using your radio properly. **Content:** A CB set is a useful bit of kit when the convoy is spread out, mobile phone signal has disappeared or you simply need vehicle-to-vehicle comms that everyone can use. But do CB radios need a licence in the UK? For most people using modern, compliant CB equipment on the permitted bands, the answer is no. CB is licence-exempt, not regulation-exempt. That distinction matters. You do not need to apply for an individual Ofcom licence or use an amateur radio callsign, but your radio, its settings and the way you operate it must meet the UK licence-exemption rules. Get those basics right and CB remains one of the simplest, most practical ways to keep in touch on the road, green laning or at a fixed base. ## Do CB radios need a licence in the UK? A compliant CB radio can be used in the UK without an individual licence. The licence exemption covers specified CB frequencies and technical limits, provided the equipment meets the relevant requirements. For the majority of mobile and homebase users, this means a proper UK-spec or European multi-standard CB radio set to the correct UK mode, used with an appropriate aerial and sensible installation. No form to complete, no annual fee and no examination. It does not mean that any radio sold as a CB can be switched on anywhere. Some imported radios include frequency bands, channel plans and power settings intended for other countries. Some export models are capable of transmitting well outside legal UK CB allocations. A radio with a country selector can be particularly confusing: selecting the wrong band can put you on frequencies that are not licence-exempt for CB use here. If you are [buying a first set](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/), choose equipment intended and supplied for legal UK CB operation. That avoids the common headache of trying to work out whether an unfamiliar band letter, expanded channel block or power menu is lawful. ## What makes a CB setup legal? The key point is that the whole transmitting setup must stay within the permitted conditions. Those conditions cover more than the radio body on the dashboard. ### Use the correct CB frequencies and modes UK CB use is centred on the 27 MHz CB allocation. Modern sets commonly offer the 40-channel European CEPT FM band, while many multi-standard radios also include the UK 40-channel band. Certain compliant radios can also offer AM and SSB operation where the applicable UK conditions allow it. The exact bands, channels and permitted modes depend on the radio specification and current Ofcom rules. A set may display far more channels than you can legally transmit on in the UK. Never assume that a channel is permitted just because it appears on the display or because you can hear activity there. There is also a 934 MHz CB allocation used by a smaller number of operators. It has its own channel plan and equipment requirements, so a 27 MHz radio is not a substitute for a 934 MHz set, and vice versa. ### Stay within the power limit Standard CB radios are designed around modest legal power limits. This is deliberate: CB is a short-range service, not a substitute for amateur radio or a high-power commercial system. A well-sited aerial, correctly matched to the radio, usually makes far more difference to usable range than chasing extra watts. Do not fit a linear amplifier to a CB transmitter unless you are certain the complete arrangement remains lawful under the relevant licence conditions. In normal UK CB use, adding an amplifier is likely to take the station beyond the permitted output power. It can also create interference, damage equipment if the aerial system is poor and attract attention for all the wrong reasons. The same applies to modifications marketed as opening up a radio, increasing power or enabling export frequencies. Owning equipment and transmitting outside permitted conditions are different matters, but transmitting on unapproved settings is not a sensible gamble. ### Use compliant equipment Buy from a specialist supplier and look for a radio intended for the UK market. That gives you a much better starting point than an unknown import with vague paperwork and a menu full of unfamiliar standards. A compliant set should be used as intended by its manufacturer. Avoid internal transmitter modifications, do not defeat power controls and use a [suitable power supply](https://cbradio.co.uk/cb-power-supply-sizing/). If you are fitting a radio in a vehicle, make sure the wiring is fused correctly and routed safely. A loose live feed or poor earth is not just an installation issue – it can create noise, unreliable transmission and a genuine safety risk. ### Fit and tune the aerial properly An aerial does not need a separate CB licence, but it is central to legal, reliable operation. A badly matched aerial can cause high SWR, reduce transmit performance and put strain on the radio’s output stage. Turning up the mic gain or adding power will not cure it. For a 4×4, the [best mounting position](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/) is often a compromise between ground plane, height, clearance from branches and the practical reality of tailgates, roof racks and spare wheels. A whip mounted low on a rear carrier may be tougher off-road, but it can lose performance compared with a properly mounted roof aerial. There is no single right answer, but there is always a reason to check SWR before regular use. At a homebase, the aerial needs sensible positioning away from people, power cables and other antennas. Larger external installations can also raise planning, landlord or site-permission questions. Radio rules are only one part of putting up an antenna. ## CB, amateur radio and PMR446 are not the same Confusion often starts when different radio services are treated as interchangeable. They are not. CB is licence-exempt when used within the CB terms. Amateur radio requires the operator to hold the appropriate amateur licence, even if the radio itself was easy to buy. Programming amateur frequencies into a handheld does not make them available for casual use. PMR446 is another licence-exempt service, usually associated with small handheld walkie-talkies. It has strict equipment rules, including the type of antenna and maximum power. A detachable-aerial handheld radio programmed to PMR frequencies is not automatically a legal PMR446 radio. Business radio systems can have their own licensing arrangements, and marine VHF has separate rules again. If your work, club or event needs guaranteed coverage, private channels or higher-power operation, CB may not be the right tool. For an off-road day, a road trip or a local group that needs straightforward comms, it is often exactly the right tool. ## Practical operating rules that keep CB useful A licence-exempt radio still deserves good operating manners. Keep transmissions short, listen before calling and move away from a busy calling channel once you have made contact. Use clear plain language, especially when giving directions in a convoy. Avoid music, deliberate interference, abusive transmissions and unnecessary chatter over someone else’s conversation. Do not use CB to pass confidential information: CB is an open radio service, and anyone within range can listen. The same warning applies to personal details, access codes and anything that would cause trouble if overheard. For convoy use, agree a channel before setting off and check every vehicle can hear and transmit before leaving the meeting point. A simple radio check can expose a loose coax plug, flat vehicle battery, incorrectly selected band or aerial fault while it is still easy to fix. ## Common questions about CB licences ### Do I need a callsign for CB? No. CB users do not need an Ofcom-issued callsign in the way amateur radio operators do. Many users have a handle or vehicle name for everyday chat, but it is not a legal callsign. ### Can I use a CB radio while driving? The licence exemption does not override road traffic law. Do not handle or adjust a radio in a way that distracts you from driving. Fit the microphone and radio securely, set the channel before moving where possible, and keep your attention on the road or trail. ### Can I use an old CB set? Possibly, but check it carefully. Older UK FM rigs, converted equipment and vintage sets may not match current licence-exempt technical requirements. A modern compliant radio is usually the simpler option, particularly if you want compatibility with other vehicles using current multi-standard sets. The sensible approach is simple: start with a compliant UK-spec CB radio, fit a decent aerial, set the correct band and have the installation checked before relying on it. If you are unsure about a particular set, aerial or power arrangement, CB Radio UK can help you choose equipment that suits the way you actually use your vehicle. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/do-cb-radios-need-a-licence-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/do-cb-radios-need-a-licence-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/do-cb-radios-need-a-licence-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/do-cb-radios-need-a-licence-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Do%20CB%20Radios%20Need%20a%20Licence%20to%20Use%20in%20the%20UK%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fdo-cb-radios-need-a-licence-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/do-cb-radios-need-a-licence-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/do-cb-radios-need-a-licence-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/do-cb-radios-need-a-licence-uk/?share=telegram) - **Categories:** Uncategorised --- ### [Best CB Aerials for Homebase Use in the UK](https://cbradio.co.uk/best-cb-aerials-for-homebase/) **Published:** August 6, 2026 **Author:** **Excerpt:** Find the best CB aerials for homebase stations in the UK. Compare key verticals, beams and dipoles, then choose suitable height, cable and tuning advice. **Content:** A homebase CB can only work as well as the aerial above it. You can buy a capable radio, fit quality coax and have a decent power supply, but a poorly sited or badly matched antenna will still leave you receiving noise and struggling to get out. When people ask about the **best CB aerials for homebase** use, the right answer depends on space, mounting options, the direction you want to cover and how much installation work is practical at your property. For most UK users, a properly installed vertical base aerial is the sensible starting point. It gives all-round coverage, suits local contacts and mobile stations, and avoids the need to keep turning an antenna towards the station you want to reach. That said, a dipole or beam can be the better choice where local noise is a problem or you have a particular direction in mind. ## What makes a good homebase CB aerial? The best aerial is not automatically the longest, most expensive or highest-gain model in the catalogue. A good homebase aerial should be resonant or easily tuneable for the CB frequencies you use, mechanically strong enough for British weather, and suitable for the way it is mounted. CB aerials for a fixed station are usually vertically polarised, because most vehicle-mounted CB aerials are vertical too. Matching their polarisation gives the strongest practical signal for local communication with cars, 4x4s, lorries and other mobile users. A vertical aerial also radiates equally around the horizon, which is useful if your contacts could be in any direction. Height matters, but clear space matters almost as much. An aerial on a mast with a clear view over nearby roofs, trees and sheds will usually outperform one mounted only slightly lower but surrounded by metalwork and obstructions. Get it safely above the roofline where possible, while keeping the mast, brackets and cable run sensible. ## Vertical base aerials: the usual best choice A dedicated vertical CB base aerial is normally the best route for homebase stations. These are designed to work without relying on a vehicle body as the ground plane, unlike many mobile whips. They are straightforward to mount on a suitable pole and give a useful omnidirectional pattern for general CB use. A half-wave vertical is a popular option because it does not need the large set of ground radials associated with some other designs. It can be particularly useful where you have limited room around the mast. The trade-off is physical length: a half-wave CB aerial is substantial, so it needs a strong mounting arrangement and should not be treated as a light-duty accessory. A ground-plane aerial uses radials below the main vertical element to form part of the antenna system. It can perform very well when installed correctly, but the radials need room and must be kept clear of gutters, roofs and other conductive objects where possible. If you have a clear mast position and adequate space, it is a dependable traditional homebase setup. Shorter verticals are easier to accommodate, but they make compromises. Loading coils allow a physically shorter aerial to operate on CB, yet can reduce bandwidth and efficiency compared with a full-size design. They can still be the correct choice for a smaller property, a discreet installation or an exposed location where wind loading is a concern. A well-mounted compact aerial will beat a full-size one that is poorly supported or impossible to tune. ### Check whether the aerial needs a ground plane This is one of the most common causes of disappointing results. A mobile CB aerial often relies on the metal body of the vehicle to work as its counterpoise. Fitting that same aerial to a chimney bracket or short pole without an appropriate ground-plane arrangement can result in high SWR and weak performance. Do not assume the mast itself is enough. If you intend to use a mobile-style aerial at home, use a proper ground-plane kit or purpose-made mounting system. In most cases, choosing a dedicated base aerial is simpler and gives a more predictable result. ## Dipoles and beams: when direction matters A horizontal dipole is a useful homebase option for the hobbyist who wants a straightforward wire aerial and has enough garden space or loft clearance. It can be inexpensive and effective, but its polarisation is different from the vertical aerials used by most mobile CB operators. For local vehicle contacts, this can mean weaker signals than a vertical base aerial. A vertically polarised dipole can address that issue, though it needs careful mounting and clearance from nearby structures. Dipoles also have a directional pattern, with stronger performance broadside to the wire and weaker signals off the ends. That can be useful if your regular contacts are mainly east and west of your location, for example. A beam aerial offers more gain and directionality. It can help pull in weaker stations and focus transmitted signal towards a chosen area, but it is not a fit-and-forget solution. Beams need a rotator if you want flexible coverage, add weight and wind loading to the mast, and demand more thought around planning, neighbours and safety. For regular local chat in all directions, a vertical remains the more practical choice. ## Choosing the right aerial height and position Mount the aerial as high as is safely realistic, but avoid chasing height at the expense of a secure installation. [A tall mast](https://cbradio.co.uk/product/4-way-guy-ring-spider-mast-collar-wire-rope-galvanised/) needs suitable brackets, sound fixing points and enough clearance from power lines. Never work near overhead electricity cables, and do not attempt mast work in poor weather or alone. Keep the active section of the aerial away from metal gutters, solar panels, satellite dishes and large trees. Nearby metal can detune the aerial and distort its radiation pattern. A little separation can make a real difference, particularly with a ground-plane or vertical dipole. Think about the coax route before installing the mast. The cable should enter the building through a protected point, with no sharp bends or crushed sections. Leave a drip loop outside so rain cannot track along the cable into the wall entry. If the cable passes through a window temporarily, avoid closing the frame tightly onto it: damaged coax can create faults that are hard to trace later. ## Coax, connectors and SWR are part of the aerial system An aerial is not just the piece above the roof. The coaxial cable, connector quality and tuning all affect the result. Use 50-ohm [CB-suitable coax](https://cbradio.co.uk/product/rg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner/) and keep the run as short as practical without making it tight or awkward. Very long cable runs add loss, especially where cheaper or unsuitable cable is used. Fit connectors carefully. [Poorly soldered plugs](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/), loose braid screening or water getting into an outdoor connection can cause high SWR, intermittent reception and reduced transmit performance. Weatherproof outdoor joints properly, but do not cover up a badly fitted connector and hope for the best. Every new homebase installation should be checked with an SWR meter before regular transmitting. Test on the relevant channels and adjust only according to the aerial maker’s instructions. Low SWR does not guarantee maximum performance, but high SWR is a warning that the aerial system needs attention. Do not use a linear amplifier to compensate for an aerial that is not matched properly. ## A practical way to choose the best CB aerial for a homebase Start with the type of contacts you want. For local coverage with mobile users in several directions, choose a vertical base aerial. For contacts mostly in one direction, or where you enjoy experimenting, consider a dipole or beam. Then assess the available mounting height, whether you can accommodate radials, and how exposed the site is to wind. If you are new to base stations, avoid building the setup around a mobile aerial unless you understand its ground-plane requirements. A dedicated base aerial, quality coax, a safe mast and an SWR meter form a far more reliable foundation. It is also worth checking the specifications of your radio and ensuring you are operating on the appropriate UK CB channels and modes. CB Radio UK can help match an aerial, mount, coax and connector arrangement to the station you are building. A few details about your available height, property type and intended use are usually enough to narrow the choice down. The best result comes from getting the basics right: choose an aerial designed for the job, mount it safely in clear space, protect the cable, then tune it carefully. Do that, and your homebase will be ready when the next call comes through. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-aerials-for-homebase/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-aerials-for-homebase/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-aerials-for-homebase/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-aerials-for-homebase/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Best%20CB%20Aerials%20for%20Homebase%20Use%20in%20the%20UK&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-aerials-for-homebase%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-aerials-for-homebase/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-aerials-for-homebase/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-aerials-for-homebase/?share=telegram) - **Categories:** Uncategorised --- ### [Best CB Speaker Upgrades for Clearer Mobile Audio](https://cbradio.co.uk/best-cb-speaker-upgrades/) **Published:** August 4, 2026 **Author:** **Excerpt:** Find the best CB speaker upgrades for 4x4s, cars and lorries. Learn what affects clarity, volume, mounting and compatibility before you buy for daily use. **Content:** A good CB radio can sound disappointingly poor when its built-in speaker is buried behind a dashboard, aimed at your knees or competing with tyre roar. The best CB speaker upgrades put speech where you can hear it, which matters far more than simply making the radio louder. For a 4×4 convoy, a working lorry or a daily vehicle, clearer received audio means fewer repeats, less distraction and better communication when conditions get noisy. An [extension speaker](https://cbradio.co.uk/product/extension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios/) is also one of the simplest upgrades you can make. Most plug into the external speaker socket on the radio and can be mounted close to the driver, but choosing the wrong type can leave you with harsh audio, poor volume or an awkward installation. Here is what to look for before fitting one. ## Why an External CB Speaker Makes Such a Difference The internal speaker in a compact CB is a compromise. It has to fit inside a small case, and the radio itself is often installed in a position chosen for wiring and access rather than sound. Under a dash, in a centre console or tucked beside a seat, much of the audio is blocked or directed away from the driver. A separate speaker lets you move the sound source to a sensible place. In a Land Rover, pickup or van, that might be on the lower dash, beside the windscreen pillar or beneath an overhead console. In a lorry cab, it may sit above the screen or near the radio mounting. The improvement is often immediate because voice audio reaches your ears directly instead of bouncing around the cabin. CB communication is mainly about intelligibility. You do not need deep bass or hi-fi sound. You need voices to cut through engine note, wind, mud-terrain tyres and the rattle of tools in the back. A communications speaker is designed with that job in mind. ## Best CB Speaker Upgrades by Vehicle and Use There is no single best speaker for every installation. The right choice depends on cabin noise, available mounting space and how exposed the vehicle is to damp and dust. ### Compact speakers for cars and tight dashboards A small, unamplified extension speaker is usually the sensible choice for a car, small van or neatly installed mobile CB. Look for a compact enclosure with a swivel mounting bracket, allowing you to point the speaker towards the driver. This is particularly useful where the CB is mounted low down and the speaker needs to sit on top of the dash or on a side panel. Compact speakers are not generally the loudest option, but they can be very clear when mounted properly. They suit users who want a tidy, reliable upgrade without adding extra wiring or taking up valuable dashboard space. ### Heavy-duty speakers for 4x4s and working vehicles A larger communications speaker is often better in a Defender, pickup, agricultural vehicle or lorry. These cabins can be loud, and a bigger speaker cone and enclosure usually provide more usable volume without becoming shrill. Choose a sturdy housing and a bracket that will not work loose over corrugations, green lanes or rough tracks. A metal bracket is useful, but installation matters just as much. Use suitable fixings, avoid thin trim panels where possible and make sure the cable cannot rub against sharp metal edges. For an off-road vehicle with removable doors, open windows or regular muddy use, consider where water may enter. A standard external speaker mounted inside the cab is normally fine. If the speaker will be exposed in a utility vehicle, boat, buggy or open-sided setup, a weather-resistant speaker is the better fit. ### Amplified speakers for exceptionally noisy cabs An amplified external speaker has its own small amplifier and can be worthwhile where a normal speaker cannot overcome the ambient noise. It can be a practical answer in a loud commercial cab, a soft-top 4×4 or a vehicle with a particularly distant radio location. The trade-off is extra wiring. Amplified speakers need a power supply as well as the audio connection, and poor routing or a weak earth can introduce electrical interference. They also need careful volume adjustment. Too much gain can make received stations sound distorted rather than clearer. For most standard CB installations, a quality unamplified speaker placed close to the driver will do the job. Consider amplification when you have already improved the mounting position and still cannot hear calls clearly at normal road speeds. ## Match the Speaker to Your CB Radio Before ordering, check your [radio manual](https://cbradio.co.uk/cb-radio-manuals/) or the label near the external speaker socket. Most mobile CB radios use an 8-ohm external speaker, but this should never be assumed. Matching the recommended impedance protects the radio’s audio output and helps it deliver the expected volume. The plug type matters too. Many CB radios use a 3.5 mm mono jack for an external speaker, although not every set is the same. Some installations need an adapter, a longer lead or a replacement plug. Checking this first prevents a simple upgrade becoming a soldering job on the driveway. Power handling is worth considering, but it is often misunderstood. A speaker rated to handle more power than your CB produces is perfectly acceptable. What matters more is sensitivity and voice clarity. A highly sensitive communications speaker can sound louder from the same radio than a larger speaker with less efficient design. If you use a public-address function, make sure you are buying the right item. An external CB speaker is for received audio inside the vehicle. A PA horn is designed to project your voice outside the vehicle and normally connects to a separate PA output. They are not interchangeable. ## What Makes CB Audio Clear Rather Than Just Loud? A speaker marketed as high-power is not automatically the best choice. Speech clarity comes from the balance of the speaker, its enclosure and its position. CB audio sits mainly in the vocal midrange, so a speaker that emphasises that range will make calls easier to understand. Avoid fitting the speaker directly against a surface that vibrates. A thin plastic dashboard panel can buzz at higher volume and make a perfectly decent speaker sound poor. If needed, use the supplied bracket with a firm mounting point and leave enough clearance for the speaker grille. Direction matters. Aim the speaker at the driver’s head rather than at the footwell, windscreen or passenger seat. It is a small adjustment, but it can make the difference between hearing a convoy call first time and asking for it again. Keep the speaker lead away from ignition components, high-current power wiring and poorly suppressed accessories where practical. If you hear alternator whine, clicking or electrical noise only after fitting a powered speaker, inspect the power and earth connections before blaming the CB itself. ## Choosing a Mounting Position The best position is close enough to hear clearly without blocking your view, interfering with airbags or getting in the way of controls. In many vehicles, the upper dash or screen pillar area works well. In a 4×4 with a roof console, an overhead position can keep the speaker safe and direct sound down into the cabin. Do not mount a speaker where a passenger can knock it with their knee, where its cable can snag on gear, or where it prevents access to switches and fuse panels. It is also wise to leave a little slack in the lead so vibration does not pull on the radio’s speaker socket. For temporary setups, a bracket mounted with suitable automotive fixing pads can be useful, but permanent off-road installations deserve mechanical fixings. Constant vibration eventually finds weak adhesive, especially through hot summers and cold, damp winters. ## A Simple Upgrade Order That Works If your CB is hard to hear, start with speaker placement rather than chasing the largest unit available. Fit an external speaker of the correct impedance, mount it securely and aim it at the driver. Test it with normal engine and road noise, not just while parked on the drive. Next, adjust the radio’s volume and squelch correctly. Excessive squelch can clip the start of weaker calls, while very low squelch fills the cab with background hiss. If your radio has RF gain or audio tone controls, use them carefully. Small changes are normally more effective than turning every control fully up. Finally, check the wider installation. A weak aerial system does not become a strong one because the speaker is louder. If received signals are faint, noisy or inconsistent, inspect the aerial, mount, coaxial cable and [SWR setting](https://cbradio.co.uk/how-to-use-an-swr-meter/) as well as the audio side of the setup. At CB Radio UK, the useful approach is to choose the speaker around the vehicle and the way you actually use the radio, rather than buying on wattage alone. A well-mounted, correctly matched extension speaker may be a modest upgrade, but on a wet lane, a busy motorway or a long night run, it is the one that helps you hear the call when it counts. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-speaker-upgrades/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-speaker-upgrades/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-speaker-upgrades/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-speaker-upgrades/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Best%20CB%20Speaker%20Upgrades%20for%20Clearer%20Mobile%20Audio&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-speaker-upgrades%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-speaker-upgrades/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-speaker-upgrades/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-speaker-upgrades/?share=telegram) - **Categories:** Uncategorised --- ### [CB Power Supply Sizing for Reliable Radio Use](https://cbradio.co.uk/cb-power-supply-sizing/) **Published:** August 2, 2026 **Author:** **Excerpt:** Get CB power supply sizing right for homebase radios, amplifiers and accessories. Learn how to calculate current, allow headroom and avoid voltage drop. **Content:** A homebase CB set that sounds fine on receive but dims, distorts or shuts down when you press the microphone is often suffering from one simple problem: an undersized supply. Correct **CB power supply sizing** is not about buying the biggest unit on the shelf. It is about supplying clean, stable 13.8V DC at the current your equipment actually needs, with enough reserve for real use. For a straightforward CB radio, the answer is usually modest. Add an amplifier, a high-power radio, several accessories or a long DC cable run, though, and the calculation changes quickly. Getting it right protects your equipment and gives you the reliable transmit performance you expect from a fixed station. ## Start with the radio’s transmit current The figure that matters most is the radio’s maximum current draw on transmit, not its receive consumption. A CB may draw well under an amp while listening, then need several amps as soon as you transmit. The label on the rear of the radio, the instruction manual or the manufacturer’s specification should state the required supply voltage and maximum current. Most UK CB equipment is designed for a nominal 13.8V DC supply, matching a vehicle’s electrical system while the engine is running. A regulated 13.8V power supply is therefore the usual choice for a homebase installation. Some supplies have an adjustable output, but do not turn it up simply to chase more power. Your radio is designed around its stated operating voltage. As a broad guide, a legal 4W FM or AM CB radio commonly needs around 3A to 5A on transmit. SSB sets can draw more, particularly on peak speech power, so a 5A to 7A requirement is common depending on the model. These are only starting points. Use the figure for your own radio rather than assuming every set is the same. ## CB power supply sizing needs headroom Once you know the maximum transmit current, choose a supply with useful spare capacity. A sensible rule for a radio on its own is to allow at least 25 to 50 per cent headroom above the stated current draw. If your radio is rated at 4A transmit, a 5A supply may operate it, but a quality 7A or 10A regulated unit is normally the more comfortable choice. It will run cooler, cope better with speech peaks and leave capacity for a small [extension speaker](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/), meter illumination or other low-current accessories. Headroom is particularly worthwhile where the station will be used for long overs, regular calling or group communication. A supply operating at its absolute limit may become hot, introduce electrical noise through its fan or voltage regulation, or shorten its service life. The cheapest option can become false economy when it causes poor audio on air. Do not confuse a supply’s peak rating with its continuous rating. Some units are advertised with a higher intermittent or surge figure. For radio use, size the installation around the continuous output rating. A supply described as 10A continuous and 12A surge is a 10A supply for this purpose. ## Add every item that shares the supply A power supply only knows the total load connected to it. If more than one device runs from the same 13.8V source, add their maximum current figures together before allowing headroom. A typical homebase station might include a CB radio, an external speaker, an SWR/power meter with lighting, a small 12V fan and a charger or accessory socket. The speaker and meter may use very little, but it is still better to account for them than to guess. If you plan to run equipment later, allow for it now rather than replacing the supply after the installation is built. The basic calculation is: **Total maximum current of all equipment × 1.25 to 1.5 = minimum sensible continuous supply rating** For example, a radio rated at 5A plus accessories drawing 1A gives a 6A maximum load. With 50 per cent headroom, choose a supply rated at around 9A continuous. In practice, a 10A regulated power supply would be the sensible next size. ## Amplifiers require a separate calculation An amplifier changes the picture more than any other accessory. Do not size a supply from the amplifier’s claimed RF output power or from the current used by the radio alone. Check the amplifier’s own manual or rating label for its DC input current at the intended output level. A small amplifier may need considerably more current than the CB radio driving it, while larger units can require a substantial supply. If the current specification is unclear, do not rely on a rough online estimate. Ask before buying or use a properly rated supply designed for the amplifier’s stated requirement. It also matters how the equipment is wired. The amplifier and radio should be supplied according to their instructions, using cable of the correct size and suitable fusing. A weak supply or thin cable can cause voltage sag on voice peaks. Symptoms include reduced output, poor modulation, relays chattering, a display resetting or increased interference. For any higher-current setup, a dedicated regulated supply with a clear continuous rating is preferable to trying to make a small radio supply do a job it was never built for. Keep in mind that any use of amplifiers must comply with the applicable UK licensing and radio regulations. ## Regulated versus unregulated supplies For modern CB radios, choose a regulated power supply. Regulation keeps the output voltage close to its set value as the load changes between receive and transmit. That stability is good for the radio and helps avoid changes in output or audio quality caused by voltage fluctuation. An unregulated transformer-type supply can show a voltage well above its stated figure when lightly loaded, then drop noticeably under transmit. Older equipment and certain uses may have different requirements, but for a typical 13.8V CB homebase installation, a regulated unit is the practical choice. Switch-mode power supplies are compact, efficient and widely used. A good one can be an excellent choice, but poor-quality examples may put hash or switching noise across the radio bands. If you hear a whine, buzz or repeating noise that changes when the supply is connected, the supply may be contributing to the problem. A purpose-built radio supply is usually a better bet than an unknown budget unit. Linear supplies are often valued for quiet operation, although they are generally heavier and less efficient. Neither type is automatically right for every station. The deciding factors are clean output, adequate continuous current, reliable protection and the space available on your bench. ## Cable size and fusing still matter A correctly rated power supply cannot overcome poor wiring. Keep the DC leads as short as practical, use sound connectors and choose cable heavy enough for the current and length involved. Long, thin leads create resistance, and resistance creates voltage drop. The radio may then see less than 13.8V even though the supply is working perfectly. Use the radio’s supplied lead where possible, particularly if it includes an inline fuse. If you make up leads or connect several items to one supply, fit appropriate fuses close to the positive source connection. The fuse protects the cable from a fault, so its value should suit the cable and equipment, not simply be made larger to stop it blowing. Observe polarity carefully: red is positive and black is negative. Reverse polarity can damage a radio immediately if its protection does not operate. Turn the supply off before making changes, and never leave loose bare wire ends around a metal bench or vehicle body. ## Check performance under transmit load After installation, do a practical check rather than trusting the numbers alone. With the aerial connected and correctly matched, monitor the supply voltage while transmitting briefly. A small change is normal, but a major drop suggests the supply is undersized, the wiring is inadequate or there is a poor connection. Watch for signs of trouble: display dimming, distorted transmit audio, an unusually noisy cooling fan, hot cables, a burning smell or a supply that cuts out. Stop using the setup if any of these occur. Check the current requirement, fuse ratings, connections and cable condition before returning it to service. A multimeter is useful here, but you do not need a laboratory bench to make a sound choice. Start with the stated transmit current, add every planned load, select a regulated supply with proper continuous headroom, and wire it carefully. That gives your CB station a dependable foundation – whether it is used for local calls from the shack, organising a green-laning trip or keeping in touch from the yard. If you are between two supply sizes, choose the larger quality unit. The extra capacity costs less than chasing an intermittent transmit fault later. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-power-supply-sizing/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-power-supply-sizing/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-power-supply-sizing/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-power-supply-sizing/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Power%20Supply%20Sizing%20for%20Reliable%20Radio%20Use&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-power-supply-sizing%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-power-supply-sizing/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-power-supply-sizing/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-power-supply-sizing/?share=telegram) - **Categories:** Uncategorised --- ### [Why Is My CB Squealing? Find the Fault Fast](https://cbradio.co.uk/why-is-my-cb-squealing/) **Published:** July 31, 2026 **Author:** **Excerpt:** Why is my CB squealing? Trace feedback, poor SWR, aerial faults and power noise with practical checks for clearer mobile and homebase radio signals today. **Content:** A CB that suddenly whistles, screeches or howls can make a perfectly good radio sound faulty. If you are asking, **why is my CB squealing**, the noise is usually caused by audio feedback, RF getting where it should not be, an aerial system issue, or electrical interference from the vehicle. The key is to identify exactly when it happens: while receiving, only when transmitting, with the engine running, or whenever the microphone is connected. Do not keep transmitting while the set is squealing, particularly if you suspect an aerial or SWR problem. A short test is useful. Repeated transmissions into a badly matched aerial system are not. ## Why Is My CB Squealing When I Transmit? A squeal that starts as soon as you press the PTT button is most often **RF feedback**. In plain terms, some of your transmitted signal is getting back into the radio, microphone lead, extension speaker or another part of the installation. The radio then re-amplifies it, creating the familiar high-pitched howl. This is more likely with high microphone gain, a power microphone, an amplifier, a poorly positioned extension speaker, or a vehicle installation with untidy cable routing. It can also point to a poor aerial earth plane, a high SWR reading, or a bad connection in the coaxial lead. Start with the simple checks. Turn the mic gain down to the middle, turn off any echo or talkback function, and disconnect external audio accessories one at a time. If the squeal stops when the extension speaker is unplugged, move the speaker farther from the microphone and check its lead and plug. If it stops with a power mic removed, inspect the mic wiring and use a lower gain setting. ### Talkback and PA settings can sound like a fault Some radios and accessories have talkback, which lets you hear your own voice through the speaker. Set too high, it can feed back just like a public-address system. The same applies if a PA speaker is selected by mistake or wired too close to the cab microphone. Check the [radio’s controls](https://cbradio.co.uk/cb-radio-manuals/) and any switches on the rear panel before assuming the set needs repair. ## Check SWR Before Blaming the Radio If your CB squeals on transmit, especially alongside poor reports, reduced range or a hot radio, check the standing wave ratio. SWR tells you how well the aerial system is matched to the radio. A high reading means too much transmitted power is being reflected back rather than radiated by the aerial. An SWR meter is not just an accessory for enthusiasts. It is one of the quickest ways to diagnose a new mobile installation, a changed aerial, or a fault that appeared after catching the whip on a branch, car park barrier or garage door. With the meter connected correctly, test on the channels you normally use. A reading close to 1:1 is excellent. Around 1.5:1 is generally very workable. Once readings rise towards 2:1, stop and investigate before using high power or transmitting for long periods. If the reading is high across the band, look first at the mount, earth, coax and connectors. If it is low at one end of the band but high at the other, the aerial may need careful adjustment. Never adjust an aerial by guesswork alone. Make a small change, re-test, and keep clear of the whip while transmitting. ### Common aerial faults behind a squeal Mobile CB aerials depend on more than the whip itself. The mount must make sound electrical contact with suitable metalwork where the aerial design requires it. Paint, powder coating, corrosion, rubber isolation washers in the wrong place and loose fittings can all compromise that connection. Inspect the coaxial cable from radio to aerial. Look for crushed sections, sharp bends, water ingress, damaged insulation and a plug that can rotate or pull loose. Check that the centre pin and outer braid are correctly terminated, with no stray braid strands touching the centre conductor. A connector can look acceptable from outside while its soldered or crimped joint has failed inside. For base-station users, check outdoor joints and the point where the cable enters the building. Water in coax can create unpredictable symptoms, including noise, weak signals and poor SWR. Replacing a suspect patch lead is often quicker than spending hours chasing an intermittent connection. ## Squealing on Receive Is Usually an Audio or Noise Issue A squeal that happens when you are not transmitting has a different set of likely causes. First, turn the volume down and then reduce the squelch. If the sound changes with the squelch control, you may simply be hearing a weak carrier, another station with audio feedback, or local electrical noise sitting near the threshold. Try another channel. If the squeal is only on one channel and disappears elsewhere, it may not be your equipment at all. A nearby CB user can have a badly adjusted power mic, talkback or amplifier setup, and everyone within range will hear the result. If the noise remains on every channel, remove any extension speaker, headphones or audio adaptor. A failing speaker, damaged lead or loose plug can produce shrill, distorted audio. Test with the radio’s internal speaker if it has one. If the problem disappears, the radio is likely fine and the external audio equipment needs attention. ### Vehicle interference: engine running versus engine off Run a useful comparison test with the vehicle parked safely. Listen with the ignition off, then with it on, then with the engine running. If the squeal or whine appears only when the engine runs and rises with engine speed, you are dealing with electrical interference rather than radio feedback. Alternators, ignition systems, LED light bars, USB chargers, dash cameras, fridges and poorly suppressed accessories can all put noise onto the power supply or radiate it into the aerial lead. Modern vehicles can be particularly busy electrically, so the source is not always obvious. Power the CB directly from the battery where practical, using a properly fused positive lead and a sound negative connection. Avoid sharing a noisy accessory feed or using a lightweight cigarette-lighter lead for a permanent installation. Keep the radio power cable away from ignition wiring and high-current accessory cables. If a particular accessory brings the noise back, switch it off and deal with that item rather than fitting filters at random. ## A Sensible Fault-Finding Order Changing several things at once makes faults harder to find. Work from the radio outward, testing after each step. Begin with low mic gain and all effects switched off. Remove external speakers, powered microphones and amplifiers. Then test the aerial system with an SWR meter and inspect the aerial mount, coax and plugs. For a mobile setup, compare engine-off and engine-running conditions. For a homebase station, temporarily move the microphone and speaker farther apart, check the power supply output, and examine outdoor cable connections for moisture or corrosion. A regulated supply that is struggling under transmit load can cause odd audio behaviour, although it is less commonly the direct cause of a classic feedback squeal. If possible, substitute one known-good item at a time: another microphone of the correct wiring, a different extension speaker, a [short tested coax lead](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/), or a known-good aerial system. This is far more useful than replacing the radio first. Microphone wiring is especially worth checking if a mic has recently been changed, repaired or fitted with an adaptor. Similar-looking plugs do not guarantee the same pin configuration. ## When a CB Squeal Needs Specialist Help Stop using the set and seek advice if the radio gets unusually hot, the SWR remains high after checking the installation, there is a burning smell, or the squeal persists with a known-good microphone, aerial and power source. Internal faults can happen, but they are less common than installation, microphone and aerial problems. For new 4×4 and off-road installations, take time over the aerial location and cable route. A well-mounted aerial, correctly tested coax and sensible separation between microphone and speaker prevent most squeal problems before the first green lane or convoy run. If you need the right test gear, replacement leads or a second opinion on a stubborn setup, CB Radio UK can help you narrow down the likely cause. A CB should sound clean, not dramatic. Find out whether the squeal follows transmit, receive, engine speed or a particular accessory, and the fault normally becomes much easier to put right. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/why-is-my-cb-squealing/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/why-is-my-cb-squealing/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/why-is-my-cb-squealing/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/why-is-my-cb-squealing/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Why%20Is%20My%20CB%20Squealing%3F%20Find%20the%20Fault%20Fast&body=https%3A%2F%2Fcbradio.co.uk%2Fwhy-is-my-cb-squealing%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/why-is-my-cb-squealing/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/why-is-my-cb-squealing/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/why-is-my-cb-squealing/?share=telegram) - **Categories:** Uncategorised --- ### [CB Linear Amplifier Buying Guide for UK Users](https://cbradio.co.uk/cb-linear-amplifier-buying-guide-uk/) **Published:** July 29, 2026 **Author:** **Excerpt:** Our CB linear amplifier buying guide explains UK legal limits, power needs, aerial matching and safer alternatives for clearer, reliable mobile radio use. **Content:** A CB linear amplifier can look like the obvious answer when convoys spread out, green lanes dip into valleys or a lorry cab needs better reach. Before buying one, though, the first job is understanding what it can legally and practically do. This CB linear amplifier buying guide is written for UK users who want dependable communication, not an expensive box that causes interference, overheats or puts a setup on the wrong side of the rules. ## Start with the UK CB legal limit For licence-exempt CB use in the UK, a linear amplifier must not be used to increase transmit power. UK CB equipment is approved for set power limits: 4 watts for FM and 12 watts PEP for SSB where SSB is permitted. Adding an external RF power amplifier to a CB transmitter takes the station outside those licence-exempt conditions. That makes the buying decision more straightforward than many product adverts and forum discussions suggest. If your intended use is transmitting on UK CB channels, do not buy a linear amplifier as a range upgrade. Check the current Ofcom requirements if you are unsure, particularly if you own older equipment or operate across borders. This does not mean that every amplifier-looking item has no place in radio. Some are intended for properly licensed amateur radio stations, specific frequency allocations or technical test environments. Those uses have their own licence conditions, band plans, power limits and equipment requirements. A CB radio, its channels and its aerial system should never be treated as a shortcut into higher-power operation. ## Why more power is rarely the first fix Radio range is not decided by transmitter power alone. In a vehicle installation, the aerial and its position usually make the biggest difference. A poor earth plane, damaged coax, badly fitted mount or aerial with a high standing wave ratio (SWR) can waste a surprising amount of the power your radio already produces. For off-road users, the problem is often terrain rather than a lack of watts. A convoy separated by a ridge, deep woodland or a steep valley may still struggle even with more power. Raising the aerial clear of the bodywork, using a suitable whip, and keeping vehicles within sensible line-of-sight distances will usually produce a more useful improvement. The same applies to homebase stations. An aerial mounted low beside guttering, solar panels or metal cladding will be compromised. A correctly installed external aerial, mounted as high and as clear as safely possible, tends to outperform a higher-powered radio feeding a poor antenna system. There is also the other end of the conversation to consider. An amplifier may make your signal stronger, but it cannot improve the receiving ability of the other station. If their aerial is poor or they are screened by terrain, you may hear them no better than before. ## The better CB upgrade: get the aerial system right Before spending money on extra equipment, inspect the installation you have. This is particularly worthwhile on 4x4s, where aerial mounts and cables live with vibration, mud, low branches and regular knocks. Start with the aerial mount. It needs a sound mechanical fixing and, where the antenna design requires it, a good electrical connection to the vehicle body. Painted brackets, corrosion, plastic panels and poorly positioned spare-wheel mounts can all affect performance. A no-ground-plane aerial is useful where a conventional ground plane is not practical, but it must be chosen for that job rather than fitted as an afterthought. Then check the [coaxial cable](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner/). Avoid crushed sections, sharp bends, loose plugs and water ingress at the aerial end. A cable that looks fine from the cab can be damaged inside a tailgate, behind trim or at the point where it enters the vehicle. Finally, measure SWR with a suitable meter and tune the aerial in its actual fitted position. Do not tune it on the ground and assume the reading will remain the same once it is mounted on the vehicle. A sensible SWR reading protects the radio and helps ensure the power it produces is actually being radiated. ## If you are buying equipment for licensed use Where an amplifier is being considered for a lawful, licensed radio application rather than CB transmission, buy for the complete station, not the headline power figure. The advertised maximum output is only one part of the specification. ### Match frequency, mode and drive power The amplifier must be designed for the frequencies and modes you are licensed to use. It must also suit the transmitter’s output level. Too much drive can damage the amplifier, produce distortion and create unwanted emissions. Too little may not allow the unit to operate as intended. SSB places different demands on equipment from FM because the signal level changes with speech. Look for clear continuous and PEP ratings rather than relying on vague claims such as “high power” or “boosted output”. A reputable specification should state the expected input power, operating voltage and realistic output figures. ### Allow for the current draw A mobile amplifier can draw far more current than a CB radio alone. That affects the cable size, fuse rating, battery condition and charging system. Connecting high-current equipment through a cigarette-lighter plug or a light accessory circuit is poor practice and can create heat at the wiring or connectors. A proper installation needs suitably rated cable, a fuse close to the power source and secure connections. It also needs thought about use with the engine stopped. A unit that works briefly on a healthy battery may leave you with a vehicle that will not start after a long session. ### Heat and duty cycle matter Power devices generate heat. In a cramped cab, under a seat or in a sealed locker, an amplifier may have little airflow and no safe way to shed it. Thermal protection is useful, but it is not a substitute for a sensible mounting location. Consider how you actually operate. Short, occasional calls are different from extended transmissions. A unit rated for a brief peak may not be suitable for a long-duty application. Heat-related failures are often blamed on the product when the real cause is an unrealistic power expectation or poor installation. ### Keep RF clean A badly matched or poorly designed high-power setup can interfere with nearby electronics, speakers, vehicle systems and other radio users. It may also generate harmonics outside the intended frequency. Clean RF is not merely a technical nicety – it is part of operating responsibly and within licence conditions. Use quality connectors, keep the RF path short and sound, and make sure the aerial system is suitable for the intended frequencies and power. If you are not confident checking SWR, bonding, power wiring and RF earthing, ask for specialist advice before transmitting. ## Choose the right solution for the job For most UK CB users, the best buying decision is not a linear amplifier. It is a correctly matched radio, a [well-sited aerial](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/), good coax and an SWR meter or professional aerial check. For a group that regularly drives beyond normal CB range, a different communications plan may be more appropriate. Network radio can be useful where mobile data coverage is reliable and the group needs wide-area contact. PMR446 is a practical option for short-range team communication, although it has its own limits. Licensed amateur radio may suit those willing to gain the appropriate qualification and operate within its rules. Each option solves a different problem, so choose based on the terrain, group size, expected distance and whether communications are vehicle-to-vehicle or back to a fixed point. For a straightforward vehicle CB setup, reliability wins. A decent aerial installation, a radio set up correctly and a spare microphone or [extension speaker](https://cbradio.co.uk/cb-extension-speaker-for-car-use/) will usually be of more use on a wet lane or a busy road than chasing extra transmit power. If you are unsure whether a product suits your radio, vehicle or intended use, speak to a specialist before ordering. CB Radio UK can help you work through the practical parts of a legal, dependable installation – from aerial choice and mounts to coax, SWR meters and power accessories. The aim is simple: make the signal you already have work properly when you need it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-linear-amplifier-buying-guide-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-linear-amplifier-buying-guide-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-linear-amplifier-buying-guide-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-linear-amplifier-buying-guide-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Linear%20Amplifier%20Buying%20Guide%20for%20UK%20Users&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-linear-amplifier-buying-guide-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-linear-amplifier-buying-guide-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-linear-amplifier-buying-guide-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-linear-amplifier-buying-guide-uk/?share=telegram) - **Categories:** Uncategorised --- ### [President CB Radio Review: Worth Buying in the UK?](https://cbradio.co.uk/president-cb-radio-review-uk/) **Published:** July 27, 2026 **Author:** **Excerpt:** Our President CB radio review covers build quality, controls, audio, UK band settings and the models that suit 4x4, road and base-station users best today. **Content:** A good CB set should not demand your attention when you are watching a green lane, manoeuvring a trailer or running a busy stretch of motorway. That is where a President CB radio review needs to start: not with a long feature list, but with how the radio behaves when you need clear, quick communication. President has earned a strong following because its sets are generally well made, sensibly laid out and available in formats that suit everything from a compact 4×4 installation to a permanent homebase station. The short answer is that President CB radios are usually a sound buy for UK users who value proper controls, clean audio and a radio that feels built for regular use. The better question is which President model suits your vehicle, aerial system and operating style. ## President CB Radio Review: What the Brand Gets Right President is not trying to make every radio look like a touchscreen entertainment unit. Its CB sets tend to put the important jobs first: selecting channels, setting volume and squelch, adjusting RF gain where fitted, and keeping an eye on the signal and transmit meters. For a working vehicle, convoy vehicle or off-road lorry, that straightforward approach is a real advantage. Build quality is one of the main reasons buyers choose the brand. Housings, controls and microphone connections generally feel more substantial than the cheapest entry-level alternatives. That does not mean every President radio is indestructible. A poorly supported set mounted to a vibrating dash, a stretched microphone lead or water getting into the aerial connection will cause trouble whatever badge is on the front. But President equipment has a deserved reputation for being made for use rather than simply being sold on price. Audio is another strong point. A correctly installed President radio normally gives clear, intelligible receive audio, especially when paired with a decent external speaker in a noisy 4×4 or lorry cab. The supplied speaker can be adequate in a quiet vehicle, but tyre noise, diesel engines and wind noise soon show the value of a properly positioned extension speaker. Transmit audio is also generally clear, provided the microphone is held correctly and the aerial has been tuned. The controls are usually easy to learn. That matters if several people use the same vehicle or if you are new to CB. You should be able to turn the set on, choose the agreed channel and set the squelch without working through menus. More advanced functions are available on certain models, but the basics remain accessible. ## The Range: Compact Sets or More Features? President makes radios for different types of user, so there is no single “best” model. A compact set such as the President Teddy II is attractive where dashboard space is tight. It is a practical choice for a small 4×4, classic vehicle or occasional convoy use. You get the core CB functions in a small footprint, without paying for features you may never use. The President Barry II is often a better fit for users wanting a little more adjustment and a fuller front panel while still keeping the installation manageable. It suits everyday road use, green-laning groups and owners who want an easy-to-operate radio with room to grow their setup. Depending on the version and approved band configuration, features such as RF gain, channel scanning and noise-reduction functions can make a noticeable difference in difficult conditions. For a tidier modern vehicle installation, a radio such as the President Bill II can make sense because of its compact design and microphone-based controls. It leaves less equipment on show, which is useful where dash space is scarce. The trade-off is that some users simply prefer proper knobs and a larger display. If you often change settings while stationary, wear gloves or prefer a more traditional CB layout, a conventional front-panel radio may be the better choice. At the higher end, models such as the President McKinley II appeal to experienced users who want more control and additional operating options. These radios are not automatically the right answer for every vehicle. More functions mean more setup decisions, and the benefits are greatest when you understand how you intend to use them. For simple convoy chat on legal UK CB channels, a well-installed basic radio and a [quality aerial](https://cbradio.co.uk/product/pni-ml100-cb-antenna-26-30mhz-250w/) can outperform an expensive set connected to a poor aerial. Handheld options, including President Randy models, have their place too. They are handy for marshals, recovery work, events and occasional use outside the vehicle. However, a handheld inside a metal-bodied 4×4 is not a substitute for a properly mounted mobile radio with an external aerial. Vehicle metalwork heavily reduces the usefulness of the handheld’s own aerial. Use an external aerial adaptor where appropriate, and it becomes a much more capable tool. ## Performance Depends on the Installation The most honest part of any President CB radio review is this: the aerial system matters at least as much as the radio. A premium transceiver cannot compensate for a badly earthed mount, damaged coaxial cable, water in a connector or an aerial that has not been checked with an [SWR meter](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/). For most mobile setups, mount the aerial as high and as clear as the vehicle allows. A roof mount often gives the most even all-round performance, while a gutter, wing or rear-mounted bracket can be a sensible compromise when roof mounting is not practical. On a 4×4 with a rear wheel carrier, avoid assuming that a rear-mounted aerial will perform perfectly just because it looks neat. The spare wheel, bodywork and rack can affect its radiation pattern. Aerial length is also a compromise. A short stub aerial is convenient in car parks and woodland but normally gives away some performance. A longer whip can offer better results, particularly in open country, but needs a strong mount and sensible routing. For laning, a flexible aerial or a spring at the base can save damage when branches are involved. Before regular use, check SWR and investigate an unexpectedly high reading. Do not treat tuning as an optional extra. It protects the radio and helps you get the range and transmit clarity you paid for. At CB Radio UK, this is the sort of practical detail worth getting right before deciding that a radio is at fault. ## UK Bands, Modes and Buying the Right Version UK buyers should make sure the radio is supplied in the correct legal configuration for use here. CB regulations, approved frequencies and permitted modes are not an area for guesswork, particularly with multimode sets that may offer settings intended for other countries or export markets. For ordinary UK CB use, choose a properly configured radio and use it within the permitted band plan and power limits. A reputable specialist can help identify the correct version, but it remains the operator’s responsibility to use the equipment lawfully. This is especially relevant when buying used equipment, where previous owners may have altered settings. It is also worth being [realistic about range](https://cbradio.co.uk/can-cb-radios-talk-far/). CB is excellent for vehicle-to-vehicle communication, organising a group, speaking to a nearby base or keeping in touch on rural routes. It is not a guaranteed long-distance service. Hills, buildings, tree cover, weather conditions, aerial placement and local electrical noise all affect results. In open terrain with two well-installed mobile stations, communication can be very useful. In a deep valley or dense urban area, it may be much more limited. ## Useful Features and Those You May Not Need President’s more feature-rich radios can include channel scan, memory channels, automatic squelch, RF gain, noise reduction, weather functions on versions made for relevant markets, and display customisation. Some of these are genuinely useful. RF gain can help reduce strong nearby signals, channel scan is handy when monitoring activity, and noise reduction can improve comfort in electrically noisy vehicles. Automatic squelch is convenient but should not replace learning to set manual squelch. A manual setting lets you hold the threshold just above background hiss, which can help you hear weaker stations. Likewise, a multi-colour display may look smart, but it is less important than having controls you can read and operate safely in daylight and at night. For off-road groups, agree a working channel before setting off and keep the setup simple. The most useful additions are usually a good aerial, correctly routed coax, a secure fused power feed and an external speaker. Those upgrades make a greater day-to-day difference than a long list of menu functions. ## Who Should Buy a President CB Radio? A President set is a particularly good match for drivers who want a reliable mobile radio rather than the absolute cheapest way into CB. It suits 4×4 owners, touring groups, lorry drivers, agricultural users and hobbyists who appreciate decent ergonomics and a broad choice of models. It also makes sense for a beginner who wants to buy once rather than replace a basic set after a season of use. The value calculation changes if you only need a radio for one annual event or an occasional car club run. In that case, a simpler compact President model is likely enough, and money is better spent on the aerial installation. Conversely, a regular user with a base station or several vehicles may get more from the extra controls and flexibility of a higher-spec model. President CB radios are not magic range machines, and the badge alone will not solve an installation problem. What they offer is a dependable foundation: clear controls, solid general build quality and a choice of radios that makes sense for real UK vehicles. Choose the size and features you will actually use, fit the best aerial your vehicle can sensibly carry, check the SWR, and your radio will be ready when the convoy disappears around the next bend. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/president-cb-radio-review-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/president-cb-radio-review-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/president-cb-radio-review-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/president-cb-radio-review-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20President%20CB%20Radio%20Review%3A%20Worth%20Buying%20in%20the%20UK%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fpresident-cb-radio-review-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/president-cb-radio-review-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/president-cb-radio-review-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/president-cb-radio-review-uk/?share=telegram) - **Categories:** Uncategorised --- ### [Why Is My CB Radio Crackling? Find the Fault](https://cbradio.co.uk/why-is-my-cb-radio-crackling/) **Published:** July 25, 2026 **Author:** **Excerpt:** Why is my CB radio crackling? Check the aerial, earth, power supply and nearby interference, then isolate the fault with these practical tests at home. **Content:** A CB that sounds like frying bacon can make a quiet lane, green lane run or convoy chat thoroughly frustrating. If you are asking, **why is my CB radio crackling**, the answer is usually not a faulty radio straight away. CB sets receive every bit of electrical and radio-frequency noise around them, and the real job is working out whether that noise is normal background hiss, interference entering through the aerial, or a fault in the installation. The quickest route to an answer is to change one thing at a time. Do not start by replacing the radio, aerial and coax together. A simple test sequence will normally point to the culprit and save money on parts you did not need. ## First, establish what the crackle actually does Turn the squelch fully anticlockwise so the receiver is open. A steady rush of noise is normal. On 27 MHz, atmospheric noise, distant transmissions and electrical interference can all be present even when nobody local is talking. Turn the volume down, then back up, to confirm it is receiver noise rather than a damaged extension speaker or loose speaker plug. Now watch for patterns. Does the crackling rise and fall with engine revs? Does it begin when you switch on LED work lamps, a heater blower, phone charger or fridge? Is it only on one channel, or on every channel? Does it disappear when the vehicle is parked away from home? These details matter far more than how loud the noise seems. A crackle only while another station is speaking may be a weak signal, a badly adjusted squelch, or another user transmitting nearby. Crackle that remains on all channels with no signal is more likely to be local electrical noise or a connection issue. ## Why is my CB radio crackling in a vehicle? Vehicle installations have plenty of potential noise sources. Modern diesels, LED accessories and cheap switched-mode chargers can be surprisingly noisy on CB. Older vehicles can add ignition interference, alternator whine and poor earth connections to the list. Start with the engine off and all accessories off. Listen with the squelch open, then start the engine and add electrical items individually. If the noise appears at one point, you have a useful lead. Common offenders include: - LED light bars, spotlights and work lamps - USB chargers, inverter units and dash cameras - Electric cooling fans, heater blowers and fuel pumps - Ignition systems, alternators and poorly suppressed motors If the crackle follows engine speed, look first at charging and ignition suppression. Check that battery terminals are clean and tight, and inspect the main earth straps between battery, body and engine. A weak vehicle earth can make several electrical problems appear at once. For a mobile CB, power ideally comes directly from the battery through an appropriately fused positive lead, with a sound negative connection. Feeding a radio from an existing accessory circuit can bring noise from the vehicle wiring directly into the set. [Direct battery wiring](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/) does not cure every interference problem, but it removes one common path. Do not confuse the radio’s DC negative connection with the aerial mount’s RF earth or ground plane. They are related in a metal-bodied vehicle, but they are not the same job. A poor aerial mount bond can affect aerial performance and make the installation more susceptible to unwanted noise. ### Test accessories before buying filters Switch off a suspected accessory completely, not merely at its control panel. Some USB chargers and LED drivers still generate noise whenever they have power. If the crackle stops, disconnect that item temporarily or power it from another source to confirm the result. A ferrite choke can help where noise travels along an accessory cable, but it is not a magic cure. It needs to be fitted close to the noisy device or the cable entry point, and the underlying wiring and earths still need to be right. A poor-quality LED driver may simply need replacing with a properly suppressed unit. ## Check the aerial, coax and mount An aerial system does not usually create crackle by itself, but damaged coax, water ingress and corroded mounts can make reception unpredictable. They can also harm transmit performance, so they deserve an early inspection. Look closely at the PL-259 plugs, aerial base and coax route. Green corrosion, a loose centre pin, crushed cable, split insulation or moisture under the mount are all warning signs. Coax that has been trapped in a tailgate or door can look acceptable outside while the braid and centre conductor are damaged within. If the noise changes when you flex the coax near a plug or touch the aerial mount, stop transmitting until the connection has been checked. An intermittent aerial connection can produce high SWR when you transmit, and that can stress the radio’s output stage. Use an [SWR meter](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/) to check the installation on the channels you use. A high or unstable reading does not prove that it is the source of receive crackle, but it confirms the aerial system needs attention. Check SWR after fitting a new aerial, moving a mount, replacing coax or changing the vehicle’s bodywork bonding. A [magnetic mount](https://cbradio.co.uk/product/cb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile/) needs a clean, solid section of metal roof to work properly. Mounting it on a roof rack, a heavily curved panel or a small isolated metal area can compromise the ground plane. For permanent mounts, remove paint beneath the mount only where the fitting instructions require it, and protect the area against corrosion afterwards. ## Separate aerial-borne noise from radio noise With the radio receiving and the squelch open, disconnect the aerial plug from the radio and listen again. Do not transmit with the aerial disconnected. If the crackling drops dramatically, the noise is being received through the aerial system. That does not automatically mean the aerial is faulty – it may be picking up genuine interference from nearby power lines, houses, solar equipment or vehicle electronics. If the noise remains almost unchanged with the aerial unplugged, investigate the radio’s power feed, the speaker, and interference entering directly into the radio or its wiring. Try the set from a known quiet 12V supply if practical. A base station can be tested with a different regulated power supply, provided it has adequate current capacity and correct polarity. For a proper workshop-level test, a 50-ohm dummy load lets you assess the receiver without receiving normal off-air signals. It must be rated for the radio’s transmit power if you intend to transmit into it. This is useful, but for most owners the aerial unplug test and a check with another known-good aerial will tell you enough. ## Do not overlook local RF interference Sometimes the CB installation is sound and the noise is simply where you are parked. Overhead power lines, solar inverters, electric fences, poorly screened broadband equipment and neighbouring electronics can all raise the noise level on 27 MHz. A noise that is severe at home but disappears a mile down the road is strong evidence of a local source. Try listening in a different location and at different times of day. Solar and battery systems may be quiet overnight but noisy while charging. An electric fence often produces a regular ticking pulse. Broadband-related interference can sound like a broad, harsh hash across many channels. These clues help narrow the source without taking the vehicle apart. ## Set the controls sensibly Squelch is there to mute background noise between calls, not to repair a noisy installation. Set it with no incoming signal: turn it clockwise until the noise just disappears, then back it off slightly if weak stations are being lost. Running the squelch too high can make a working CB seem deaf. RF gain, where fitted, controls receiver sensitivity. In a very noisy area, backing it off a little can make local stations easier to understand. It is a trade-off, because distant weak signals will also reduce. NB or ANL noise blanker functions may reduce sharp ignition-type pulses, but they will not remove every kind of electrical hash. If your radio is crackling only through an extension speaker, try the built-in speaker. Check the extension lead and plug before assuming the set has failed. Speaker cable routed alongside power cables or LED wiring can pick up noise too. ## When the radio itself may be at fault A radio fault is more likely when the crackle is present on a known-good power supply, with different speakers and aerials, and in more than one location. Distorted receive audio, intermittent controls, a noisy volume potentiometer or crackling that changes when the case is gently moved can point to an internal issue. Avoid opening the radio unless you are qualified to service it. Modern CB sets contain surface-mounted components, and random adjustment of internal controls often makes alignment worse. A specialist can test receiver sensitivity, audio stages and transmit output properly, rather than guessing from symptoms. A methodical check of power, accessories, aerial connections and location will solve most cases. Start with the simple tests, write down what changes the noise, and only buy suppression parts or replacement equipment once the evidence points that way. That is how you get back to clear convoy calls instead of listening to static. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/why-is-my-cb-radio-crackling/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/why-is-my-cb-radio-crackling/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/why-is-my-cb-radio-crackling/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/why-is-my-cb-radio-crackling/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Why%20Is%20My%20CB%20Radio%20Crackling%3F%20Find%20the%20Fault&body=https%3A%2F%2Fcbradio.co.uk%2Fwhy-is-my-cb-radio-crackling%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/why-is-my-cb-radio-crackling/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/why-is-my-cb-radio-crackling/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/why-is-my-cb-radio-crackling/?share=telegram) - **Categories:** Uncategorised --- ### [What CB Antenna Length Means for Your Setup](https://cbradio.co.uk/what-cb-antenna-length-means-for-your-setup/) **Published:** July 23, 2026 **Author:** **Excerpt:** Wondering what CB antenna length matters? Learn how aerial height, mounting, ground plane and SWR affect range on UK cars, 4x4s and lorries reliably. **Content:** A short aerial may look tidier on a daily driver, while a tall whip can be the obvious choice for a green-lane 4×4. Neither is automatically right. If you are asking **what CB antenna length matters** most, the answer is that length affects efficiency, range, mounting options and how easily the aerial can be tuned – but it is only one part of the installation. For UK CB use around 27 MHz, a properly mounted and correctly matched aerial will usually outperform a longer aerial fitted badly. Start with the space you have, the vehicle you drive and the distances you realistically need to cover. ## What CB antenna length means in practice CB operates around 27 MHz, where a full quarter-wave aerial is roughly 2.7 metres long. That is electrically efficient, but not practical for most road vehicles. It catches on low branches, car park barriers and garage doors, and can put considerable strain on a mount. Most mobile CB aerials are shorter than a quarter wave. They use a loading coil to make the aerial appear electrically longer at the operating frequency. A 3 ft, 4 ft or 5 ft aerial can therefore work very well, provided the coil design, mount, cable routing and tuning are right. As a general rule, a longer mobile aerial has less loading and can be more efficient. It often gives a useful advantage on open roads, rural routes and off-road sites where there are few obstructions. That does not mean the tallest aerial is always the best purchase. A 5 ft whip on a poor bumper mount can be a worse performer than a 3 ft aerial mounted high and solidly with a good earth plane. ## The practical difference between short and long CB aerials A short aerial, commonly around 2 ft to 3 ft, suits vehicles where clearance matters. It is a sensible option for a 4×4 that regularly goes under trees, a vehicle used in multi-storey car parks, or a compact car with limited mounting choices. The compromise is that a short loaded aerial is generally less efficient and may have a narrower usable tuning range. Aerials around 4 ft to 5 ft are a popular middle ground. They are long enough to offer strong mobile performance, yet manageable for most cars, pickups, vans and 4x4s. For many users, this is the best balance between everyday practicality and reliable communication in convoy. Long whips, including quarter-wave designs, can offer excellent efficiency. They make particular sense on vehicles with suitable mounting points, at fixed sites, or where open-country performance is the priority. Their drawbacks are obvious: greater wind load, more clearance issues and a higher chance of snagging when travelling off road. There is no magic length that guarantees a certain range. Local terrain, vehicle bodywork, other traffic, weather conditions and the station at the other end all affect the result. Aerial length gives you a starting advantage, not a promise. ## Height and position can matter more than length The most effective place for a mobile CB aerial is normally as high and as clear as practical. An aerial mounted on the centre of a metal roof has a strong, even ground plane and is usually the easiest type of installation to tune. It also keeps the radiating part above much of the vehicle, which helps the signal get out cleanly. Real vehicles do not always allow an ideal roof mount. Roof rails, hard tops, roof tents, fibreglass panels and the need to remove an aerial regularly can all change the plan. A [sturdy gutter](https://cbradio.co.uk/product/gutter-mount-3-8-stud-cb-radio-aerial-for-land-rover-discovery-or-other-4x4-use/), wing, boot-lid or bracket mount can still work well, but placement matters. Try to keep as much of the aerial as possible above the roofline and away from metal obstructions. A rear-mounted aerial on a 4×4 is common and practical, particularly with a spare wheel carrier or rear ladder. It may radiate more strongly in some directions than others because the vehicle body sits to one side of it. For vehicle-to-vehicle use in a group, that may be perfectly acceptable. The key is to recognise the compromise rather than assuming every mounting position performs the same. Avoid placing the aerial low down behind a bonnet, roof rack, spare wheel or large metal accessory where possible. A long aerial obstructed by vehicle bodywork is not getting the full benefit of its length. ### Ground plane and no-ground-plane aerials A conventional CB aerial needs the vehicle metalwork to act as its ground plane. This does not mean simply attaching the mount to any convenient bolt. The mount must have a proper electrical connection to the vehicle body, free from paint, corrosion and heavy sealant. The outer braid of the coaxial cable is part of the antenna system, so a poor earth can cause tuning problems and weak performance. Vehicles with fibreglass roofs, composite body panels or insulated mounting areas may need more thought. A no-ground-plane aerial system is designed for situations where a normal metal ground plane is unavailable. It uses a specific coaxial lead and aerial arrangement, so the parts should be matched. Do not mix ordinary coax with a no-ground-plane aerial and expect the same result. For a homebase station, the principle is similar but the solution is different. A purpose-built base aerial is normally mounted as high and clear as possible, with suitable support and a safe, weatherproof cable run. A mobile mag-mount aerial is not a substitute for a proper fixed base aerial. ## Why SWR tuning is non-negotiable Whatever aerial length you choose, check the standing wave ratio, usually called SWR, before regular use. SWR measures how well the aerial system is matched to the radio. A high reading means more transmitted power is being reflected back towards the set instead of being radiated effectively. This is not just about squeezing out extra range. Running a CB transmitter with a seriously high SWR can stress or damage its output stage. An aerial that arrives pre-tuned may still need adjustment once it is fitted to your particular vehicle, because the vehicle, bracket, earth and mounting position all influence the result. Use an SWR meter, test in an open area and take readings on the relevant UK CB channels. If the aerial has an adjustable whip or tuning screw, make small changes and retest. Never cut an aerial randomly. Some designs are cut-to-length, while others must be adjusted only at the tip or coil according to their instructions. If the SWR is high across the band, inspect the installation before trimming anything. Check the mount earth, coaxial connectors, cable condition, centre pin contact and whether the aerial is the correct type for the radio band. Pinched coax under a door seal, a loose PL-259 plug or paint beneath a bracket can undo an otherwise good installation. ## Choosing the right length for your vehicle For a road car used mainly for local travel and occasional convoy work, a good-quality 3 ft to 4 ft aerial is often enough. Mount it high where possible and tune it properly. The improvement from a clean installation is usually more useful than adding another foot of whip length. For a 4×4, pickup or van that sees rural routes, recovery events or green lanes, a [4 ft to 5 ft aerial](https://cbradio.co.uk/product/orange-xl-stinger-antenna-1-5m-springer-ariel-rugged-4x4-cb-radio-aerial/) is a strong all-round choice. It provides good performance without becoming too awkward in everyday use. A flexible whip is worth considering where branches and rough tracks are part of the routine. For lorries and larger commercial vehicles, the cab height can provide a useful starting point, but mounting hardware and vehicle clearance need careful attention. Choose a bracket designed to stay secure under vibration and wind, and make sure the aerial does not foul cab equipment or trailer movement. For fixed stations or temporary campsite setups, height and a correctly chosen [base aerial](https://cbradio.co.uk/product/solarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna/) usually matter more than trying to adapt a vehicle aerial. Put effort into the mast, location and safe cable routing, then tune the system as a whole. ## The best antenna is the one you can use properly Do not buy a very long CB aerial simply because it should offer more range on paper. If you need to remove it before every supermarket car park, or it repeatedly catches branches on your usual routes, it may spend more time in the garage than on the vehicle. Choose an aerial length that suits the way you actually travel, fit it on a sound mount, give it the best ground plane available and set the SWR correctly. That approach gives a dependable CB setup for road trips, off-road convoys and everyday vehicle communication – and leaves you with an aerial you will be happy to keep fitted. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/what-cb-antenna-length-means-for-your-setup/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/what-cb-antenna-length-means-for-your-setup/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/what-cb-antenna-length-means-for-your-setup/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/what-cb-antenna-length-means-for-your-setup/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20What%20CB%20Antenna%20Length%20Means%20for%20Your%20Setup&body=https%3A%2F%2Fcbradio.co.uk%2Fwhat-cb-antenna-length-means-for-your-setup%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/what-cb-antenna-length-means-for-your-setup/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/what-cb-antenna-length-means-for-your-setup/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/what-cb-antenna-length-means-for-your-setup/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio Interference Fixes That Actually Work](https://cbradio.co.uk/cb-radio-interference-fixes/) **Published:** July 21, 2026 **Author:** **Excerpt:** Practical CB radio interference fixes for vehicle and homebase sets. Find the noise source, improve bonding and wiring, and hear more of the road clearly. **Content:** A CB that sounds clean with the engine off but fills with whine, ticking or buzzing as soon as you turn the key is telling you something useful: the radio is usually not the fault. Effective **CB radio interference fixes** start by identifying how the noise is reaching the set, then dealing with the source, power wiring, aerial system or vehicle bonding in the right order. For 4x4s, cars, lorries and home-base stations, there is no single magic filter that cures every problem. A well-fitted aerial, short power runs and sound earth bonding will often make more difference than adding boxes at random. Work methodically and you will avoid buying parts that do not address the actual fault. ## First, identify the type of interference Listen to the noise before changing anything. Alternator whine normally rises and falls with engine speed. A fast ticking that speeds up under acceleration may be ignition-related. A regular buzz can come from an LED light bar, USB charger, dash camera, fridge, inverter or other switched electronic accessory. Broadband crackle may be caused by a poor electrical connection, arcing lead or a faulty accessory. Turn off accessories one at a time, including mobile phone chargers and auxiliary lighting. If the noise disappears when a particular item is disconnected, you have found the best place to start. Do not rely only on switching an item off at its dashboard control, as some devices remain powered in standby. Where practical, remove its fuse or unplug it temporarily. A useful basic test is to run the radio from a separate 12-volt battery with the vehicle engine running. If the interference vanishes, it is entering through the radio’s power supply. If it remains, it is more likely being picked up by the aerial system or radiated directly into the radio and its leads. This one test can save a great deal of time. ## CB radio interference fixes for power noise The most common installation mistake is taking CB power from a convenient accessory feed, cigarette-lighter socket or busy fuse circuit. These supplies often carry electrical noise from the vehicle and may not provide a stable connection under transmit load. Run both the positive and negative power leads directly to the battery where possible. Fit an inline fuse in the positive lead close to the battery, and keep the cable route sensible and protected from heat, sharp edges and moving parts. Avoid bundling CB power cable alongside injector wiring, ignition components, alternator cables or high-current accessory feeds. The negative lead matters just as much as the positive. A radio earthed through a painted bracket, a dashboard screw or a corroded body point can create noise problems and poor transmit performance. A direct battery negative connection is usually the cleanest choice for a mobile installation. On vehicles with battery monitoring systems or complex electronics, follow the vehicle manufacturer’s recommended earth points and avoid modifying safety-critical wiring. If noise is clearly travelling down the supply lead, fit a properly rated DC noise filter close to the radio. Choose one capable of handling the radio’s transmit current, rather than a small filter intended for a low-power accessory. A filter can be very effective against conducted alternator noise, but it will not cure interference that the aerial is receiving from an LED driver mounted nearby. ## Check the aerial installation before blaming the radio Your aerial is designed to receive radio signals. It will also receive electrical hash if it is poorly installed, badly bonded or positioned close to the source. This is why an [aerial system](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/) deserves the same attention as the radio itself. Start with the mount. It needs a solid metal-to-metal connection to the vehicle body or suitable ground-plane area, depending on the antenna type. Powder coating, paint, rust, sealant and anodised surfaces can all isolate a mount electrically even when it feels mechanically secure. Clean a small contact area carefully, use suitable hardware, and protect exposed metal against corrosion once the connection is made. Aerial placement is a compromise. A high, clear position normally gives better all-round performance, but mounting an antenna directly beside an LED light bar, roof-mounted inverter equipment or a noisy power cable is asking it to pick up interference. Move the aerial or the accessory if separation is possible. Even a modest change in position can reduce noise substantially. Inspect the coaxial cable as well. Look for crushed sections, loose plugs, water ingress and cable routed tightly alongside noisy wiring. Do not coil excess coax into a neat bundle beside the radio. It is better to route it naturally and leave only the amount needed. A damaged coax lead or poor plug can make the receiver sound noisy and can also cause high SWR, which is a separate problem that must be corrected before regular transmitting. Check SWR with a suitable meter after fitting or moving an aerial. High SWR does not usually create alternator whine, but it indicates an aerial-system fault that will reduce useful performance and may put stress on the radio when transmitting. ## Improve vehicle bonding where it is needed Modern vehicles use painted panels, hinges, rubber mounts and composite trim. Electrically, that can leave bonnet, tailgate, pickup bed, exhaust and body panels poorly connected to one another. These parts can behave like noisy antennas, particularly when accessories and engine electronics are operating. Bonding straps provide a low-resistance RF path between metal sections. Braided tinned-copper strap is commonly used because it has a broad surface area and handles radio-frequency currents better than a thin single wire. Keep straps short, use clean metal contact points and secure them properly. Typical areas worth assessing include the bonnet to bulkhead, exhaust to chassis, body to chassis and tailgate or rear door to body. Do not add straps everywhere without a reason. Start with the aerial mounting area and any panel close to a known source of noise. On some vehicles, a properly [bonded aerial mount](https://cbradio.co.uk/how-to-ground-cb-antenna/) and direct battery power solve the issue without further work. On others, particularly off-road vehicles with aftermarket lighting and winch equipment, additional bonding can make a noticeable improvement. ## Deal with the accessory that causes the noise LED work lights and light bars are regular offenders, especially low-cost units with poorly screened drivers. The same applies to some USB adapters, reversing-camera systems, inverters, electric fuel pumps and dash cameras. The cleanest fix is often replacing the noisy unit with a better-designed, suppressed alternative. If replacement is not practical, try relocating the device’s control box and wiring away from the aerial, coax and CB power lead. Ferrite chokes fitted around the accessory power cable can reduce radiated noise, particularly when placed close to the noisy device. The result depends on the frequency and design of the equipment, so treat ferrites as a measured test rather than a guaranteed cure. For ignition noise on older petrol vehicles, inspect the basics: spark plugs, plug leads, distributor cap, rotor arm and ignition coil connections. Resistor plugs and suppression leads are intended to reduce radio-frequency interference, but they need to be in sound condition. Do not make changes to modern ignition or engine-management systems unless you understand the vehicle and manufacturer requirements. ## Home-base interference needs a different approach At home, the usual suspects are switched-mode power supplies, LED lamps, solar equipment, broadband routers, televisions and battery chargers. Switch individual appliances off at the mains to narrow down the source. A portable AM radio can also help locate electrical hash around a room, although it is only a guide rather than a precise test instrument. Keep the CB power supply, radio and coax away from mains extension leads, plug-in chargers and networking equipment. Use a regulated power supply with adequate current capacity for the radio, and make sure all plugs and connectors are tight. An [outdoor aerial](https://cbradio.co.uk/homebase-cb-setup-guide/) mounted clear of household wiring will generally receive less domestic noise than an antenna placed in a loft or close to electronics. If the interference is coming from outside your property, record when it occurs, which channels it affects and whether it changes through the day. That information makes fault-finding much easier if you need specialist advice. ## Avoid the tempting quick fixes Turning the squelch up only hides weak signals along with the noise. It has its place when monitoring a busy channel, but it does not remove interference. Likewise, an amplified speaker will make noise louder as well as speech, and a linear amplifier will not improve a noisy receive signal. Changing radios can help if a set has a genuine fault or poor selectivity, but it is rarely the first answer when the noise follows engine speed or appears when an accessory is switched on. Fix the installation first. A decent CB fitted with poor power wiring and an unbonded aerial mount can perform worse than a modest set installed carefully. For difficult faults, make one change at a time and test on the same channel with the same engine speed or accessory load. Write down what changed. That simple discipline prevents several alterations from masking the real cause. If you need the right aerial parts, power accessories or practical fitting advice, CB Radio UK can help you build a setup that stays usable when the road, weather and electrics get demanding. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-interference-fixes/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-interference-fixes/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-interference-fixes/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-interference-fixes/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Interference%20Fixes%20That%20Actually%20Work&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-interference-fixes%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-interference-fixes/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-interference-fixes/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-interference-fixes/?share=telegram) - **Categories:** Uncategorised --- ### [How to Use an SWR Meter Correctly on Your CB Aerial](https://cbradio.co.uk/how-to-use-an-swr-meter/) **Published:** July 19, 2026 **Author:** **Excerpt:** Learn how to use an SWR meter to check and tune your CB aerial safely, improve performance and protect your radio before heading out on the road safely. **Content:** A CB radio can sound perfectly healthy while the aerial system is quietly reflecting power straight back towards it. Knowing how to use an SWR meter gives you a quick way to check that the radio, coax and aerial are working together properly before a road trip, green-laning run or day-to-day use in the cab. SWR testing is not about chasing a number for its own sake. It is about protecting the radio and getting the best practical signal from the aerial installation you have fitted. A good reading means more of the power leaving the radio is being radiated by the aerial rather than returning down the coax. ## What an SWR meter tells you SWR stands for Standing Wave Ratio. It compares the power travelling from the CB radio to the aerial with the power reflected back from the aerial system. A perfect match would be 1:1, although a perfect figure is not always realistic once an aerial is fitted to a vehicle and used in the real world. A high SWR can point to an aerial that needs tuning, but it can also be caused by a poor earth connection, a damaged coax lead, a loose plug or an unsuitable mounting position. That is why the meter should be used as a diagnostic tool, not simply as a reason to start cutting an aerial whip. Most external SWR meters have two sockets, usually marked TX or Transmitter and ANT or Aerial. Some have a CAL control and switches marked FWD and REF, while others show the SWR reading directly. Check the markings on your own meter before connecting it, as layouts vary slightly. ## What you need before testing You need the CB radio, its fitted aerial and coax, an SWR meter suited to CB frequencies, and a short [50-ohm patch lead](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/) to connect the radio to the meter. The meter sits temporarily between the radio and the aerial system. Before starting, make sure the aerial is fully assembled and mounted where it will actually be used. Testing a [magnetic mount aerial](https://cbradio.co.uk/product/7-turbo-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread/) on a small metal shelf, then moving it to the roof of a 4×4, can produce very different results. Likewise, an aerial bracket on a rear door, spare-wheel carrier or mirror arm may need a sound earth path to the vehicle body, depending on the aerial type. Use an open area where possible. Avoid testing inside a garage, beside large metal structures or with the vehicle parked close to another vehicle. Keep people clear of the aerial while transmitting, and do not key the microphone without an aerial connected. ## How to use an SWR meter on a CB radio Turn the radio off before making connections. Disconnect the coax lead from the back of the CB radio and connect it to the meter socket marked ANT or Aerial. Then use the short patch lead between the radio aerial socket and the meter socket marked TX, Transmitter or Radio. It is easy to reverse these connections. If the meter is connected backwards, the readings may be misleading, so take a moment to check the labels. Keep the patch lead short, in good condition and rated for 50-ohm CB use. Set the radio to a legal CB channel near the middle of the band. Channel 20 is commonly used as a starting point because it gives a useful central reading. Turn the radio volume down if needed, select the normal transmit mode for your set, and make sure the microphone is connected. ### Using a meter with CAL, FWD and REF settings Set the meter switch to FWD or CAL. Press and hold the microphone transmit button, then turn the CAL control until the needle reaches the SET mark at the end of the scale. Do not hold the transmit button longer than necessary. Two or three seconds is normally enough to set the meter. While still holding the transmit button, move the switch to REF or SWR. The needle will now show the standing wave ratio. Release the microphone button and note the reading. Repeat the process on a channel near the bottom of the band and a channel near the top. For a standard UK 40-channel CB set, channels 1, 20 and 40 give a sensible picture. If you use a radio with more than one permitted band, test the channels you intend to use most, following the radio and aerial specifications. ### Using a direct-reading SWR meter A direct-reading meter does not need the CAL adjustment. Connect it in the same order, select the SWR setting if required, key the microphone briefly and read the scale. Even with this type of meter, test low, middle and high channels rather than relying on one result. Some CB radios include a built-in SWR function. These are useful for a quick check, but an external meter is generally more helpful when fault-finding because it can be moved between different radios, coax leads and aerial installations. ## What is a good SWR reading? An SWR of 1:1 is ideal. In practice, anything up to around 1.5:1 is very good for a mobile CB installation. Readings between 1.5:1 and 2:1 are usually workable, though there may be room to improve the installation if you want the best possible performance. Once readings rise above 2:1, stop and investigate before using the radio for long transmissions. Around 3:1 or higher is a poor match and can place unnecessary strain on the radio’s output stage. Do not try to solve a high reading by fitting an amplifier or turning up transmit power. The aerial system needs to be put right first. The pattern across the band matters as much as the individual figure. If SWR is low in the middle but higher at both ends, the aerial may simply have a limited usable bandwidth. If it is high everywhere, suspect the mount, earth, coax, plugs or a connection fault before assuming the whip length is wrong. ## Adjusting the aerial after your test If the SWR is higher on the high channels than on the low channels, the aerial is electrically too long and usually needs shortening. If it is higher on the low channels, it is electrically too short and needs lengthening. Make very small adjustments, then retest all three channels. Many CB aerials have an adjustable tip, tuning rings or a grub screw that allows the whip to move. These are easier to tune than a cut-to-length whip. If your aerial must be trimmed, remove only a few millimetres at a time. You cannot put material back once it has been cut. Do not overlook the vehicle itself. A roof-mounted quarter-wave aerial normally benefits from a large, well-earthed metal ground plane. A boot-lid or [rear-door mount](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/) may show a different reading because the aerial is off-centre and closer to the bodywork. Fibreglass-bodied vehicles, plastic panels and some spare-wheel mounts may need a ground-independent aerial or a properly installed earth strap, depending on the aerial design. ## When an SWR reading will not improve If the reading stays high after sensible aerial adjustment, inspect the rest of the installation. Check that the mount is tight, the centre pin of each PL-259 plug is secure, and no braid strands are touching the centre conductor. Look for crushed coax, water ingress, corrosion and sharp bends where the cable passes through a door or tailgate. An earth check is worthwhile on installations that rely on the vehicle body as a ground plane. Paint, powder coating and corrosion can insulate a bracket from the metal panel beneath it. Scraping a small contact area clean and protecting it afterwards can make a significant difference. Be careful with simple continuity tests using a multimeter. Some aerials are designed to show a DC short at the connector, while others are not, so a continuity result alone does not prove an aerial is faulty. The aerial manufacturer’s fitting instructions remain the best reference for its particular design. After tuning, remove the external meter and reconnect the aerial coax directly to the radio. A final quick check with the meter still in place is fine, but it is not normally needed as part of a permanent installation unless you have chosen an in-line meter for regular monitoring. A few careful minutes with an SWR meter can prevent a frustrating installation and help your CB perform as it should. If the readings do not make sense, take a note of the figures on low, middle and high channels, along with the aerial and mount used. That gives a specialist far more to work with when you ask for advice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-use-an-swr-meter/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-use-an-swr-meter/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-use-an-swr-meter/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-use-an-swr-meter/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Use%20an%20SWR%20Meter%20Correctly%20on%20Your%20CB%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-use-an-swr-meter%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-use-an-swr-meter/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-use-an-swr-meter/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-use-an-swr-meter/?share=telegram) - **Categories:** Uncategorised --- ### [Can CB Radios Talk Far? Real-World Range Explained](https://cbradio.co.uk/can-cb-radios-talk-far/) **Published:** July 17, 2026 **Author:** **Excerpt:** Can CB radios talk far? Learn what affects UK CB range, from terrain and aerial choice to installation, power and realistic mobile expectations today. **Content:** A convoy disappears around the next ridge, the lead vehicle calls a hazard, and your radio is suddenly more useful than any claimed ‘50-mile range’ on a box. That is the real question behind **can CB radios talk far**: not the theoretical maximum, but whether you can reliably speak to the people who matter on the road, green lane or site. For most UK mobile CB users, a sensible expectation is around 1 to 5 miles. In open country with properly installed equipment, 5 to 10 miles is quite achievable, and more is possible from high ground. In built-up areas, woods, valleys and tightly packed vehicle convoys, range can fall well below a mile. CB works best when expectations are based on the route and installation, not headline figures. ## Can CB radios talk far in normal use? Yes, but ‘far’ depends on what sits between the two aerials. CB radio operates around 27 MHz, where signals generally favour a clear path and benefit greatly from height. A pair of vehicles travelling across open moorland can communicate far beyond the distance possible between the same vehicles in a town centre. For day-to-day mobile use, a quality radio, a correctly tuned aerial and a good earth plane give dependable short-range communication. That makes CB well suited to 4×4 groups, agricultural work, road trips, recovery teams and lorry-to-lorry contact where the other station is reasonably nearby. A realistic guide looks like this. Two cars in a dense urban area may manage a few streets to around a mile. Two vehicles on rolling rural roads may get several miles. Two well-equipped stations with clear line of sight from hills can speak over much longer distances. A homebase station with an aerial mounted high above surrounding obstacles may also hear and transmit substantially farther than a vehicle installation. These figures are not guarantees. Radio range is variable by nature, and a good setup is about making your usual range reliable rather than chasing an occasional exceptional contact. ## The aerial matters more than the radio If you are deciding where to spend money, put the aerial system first. A basic but legal CB radio connected to a well-mounted, properly tuned aerial will usually outperform an expensive radio connected to a poorly fitted one. Aerial length is a major factor. A full-size quarter-wave CB aerial is roughly 2.7 metres long, which is impractical for many vehicles but electrically efficient when fitted correctly. Shorter aerials are convenient for garages, low branches and everyday driving, but they make more compromises. A decent medium-length whip is often a sensible balance for a 4×4 or working vehicle. Mounting position also changes the result. The highest practical position with the most metal around the base normally gives the most even radiation pattern. A [roof mount](https://cbradio.co.uk/product/mb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable/) is generally excellent on a metal-bodied vehicle. A rear bumper or wing mount can work well, but the vehicle body may favour signal in one direction and reduce it in another. Fibreglass-bodied vehicles, roof tents, plastic panels and heavily insulated mounts need extra thought because the aerial may not have the earth plane it expects. In those cases, a no-ground-plane aerial or a purpose-built mounting arrangement may be the right answer. Fitting an aerial by appearance alone is a common way to lose range. ## A low SWR protects the radio and helps range SWR, or standing wave ratio, tells you how effectively the aerial system is matched to the radio. A high SWR means some transmitted power is being reflected back rather than radiated efficiently. It can reduce performance and, if ignored, may damage the radio’s output stage. Check SWR after installing an aerial, changing its mount, moving it to another vehicle or replacing coaxial cable. Ideally, readings should be as low as practical across the channels you use, with a reading below 1.5:1 generally considered very good. Readings approaching 2:1 deserve investigation, while a very high reading means stop transmitting until the fault is found. Do not tune an aerial by cutting it at random. Start with the manufacturer’s instructions, use an SWR meter, and make small adjustments. Check cable plugs too. A loose connector, crushed coax or poor earth can make a capable setup sound weak and noisy. ## Terrain, buildings and weather all change CB range At CB frequencies, hills are often the deciding factor. If a ridge lies between two vehicles, range can disappear abruptly even when they are only a short distance apart. Deep valleys, woodland and large metal buildings have a similar effect. When travelling off-road, the person at the back of the group may need to relay a message through a vehicle on higher ground. Town centres create their own problems. Concrete, steelwork, traffic and electrical noise can mask weaker signals. Your radio may be receiving plenty of noise while a station only two miles away is unable to hear you clearly. Moving a few metres, changing direction or getting out from between buildings can sometimes make a surprising difference. Weather does not normally transform local CB range, but atmospheric conditions can. At times, especially during periods of high solar activity, 27 MHz signals can travel hundreds or even thousands of miles by bouncing through the atmosphere. This is known as skip. It is enjoyable for enthusiasts, but it is not useful for convoy safety or work communications because the conditions are unpredictable and distant stations can block local traffic. ## The radio type and legal power limits For UK users, approved CB equipment is designed to operate within the relevant licence-exempt technical requirements. Standard FM CB sets are commonly rated at 4 watts, while approved SSB equipment may use higher permitted peak power under the applicable rules. That modest power can still provide very practical range when the aerial and installation are right. More power is not a substitute for a poor aerial. It may make your signal stronger at the far end, but it will not overcome every hill, and it does nothing for the weak signals your receiver cannot hear. Using non-compliant power equipment can also create interference and legal problems. For reliable everyday communication, start with a compliant radio, sound power wiring, a good aerial and a proper SWR check. SSB radios can offer an advantage for longer-distance contacts because they use spectrum more efficiently and are often less affected by background noise. They are popular with experienced users, but they require more careful tuning than FM. For a group of beginners who want straightforward vehicle-to-vehicle chat, FM remains simple and effective as long as everyone is using compatible equipment and agreed channels. ## How to get the best range from a mobile CB Before replacing your radio, work through the installation. The following checks solve a large proportion of poor-range complaints: - Mount the aerial as high and as clear of obstructions as the vehicle allows. - Use [good-quality coaxial cable](https://cbradio.co.uk/product/mini8-low-loss-50-ohm-coax-cable-rg8x-20m-with-2-pl259-cb-or-ham-radio/), with no sharp kinks, corrosion or loose plugs. - Ensure the aerial mount has the required earth connection, or use a suitable no-ground-plane aerial. - Test and adjust SWR before regular transmitting. - Take power directly from the vehicle battery where practical, with the correct fuse fitted close to the supply. - Keep aerial cable and power wiring tidy, and investigate alternator whine or electrical interference if it affects reception. A suitable [external speaker](https://cbradio.co.uk/product/5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug/) can also make a real difference in a noisy Defender, pickup or work vehicle. It does not extend transmission range, but clearer received audio means you are less likely to miss a weak call when tyres, wind and diesel noise are competing for attention. ## Homebase versus vehicle range A homebase CB station can often talk farther than a mobile unit because its aerial can be mounted higher and in a clearer location. Height is valuable. Raising an aerial above nearby roofs, hedges and vehicles improves the signal path in every direction, provided it is installed safely and correctly. That does not mean every homebase will cover a huge area. A house in a valley may still be screened by surrounding hills, while a modest aerial on higher ground can perform exceptionally well. The same principle applies to off-road use: the vehicle on the hill often becomes the useful relay point for the group below. If you are building a base setup, consider the aerial type, mounting height, cable run and access for maintenance before choosing extra accessories. A well-planned aerial installation is the foundation of the station. ## Set up for the range you actually need For a weekend 4×4 convoy, dependable communication over the next few miles matters far more than a rare atmospheric contact across Europe. Choose an aerial that suits your vehicle and terrain, fit it properly, check the SWR and keep the system legal. If you are unsure whether an aerial, mount or cable arrangement suits your vehicle, CB Radio UK can help you match the practical parts before you start drilling holes or buying twice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/can-cb-radios-talk-far/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/can-cb-radios-talk-far/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/can-cb-radios-talk-far/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/can-cb-radios-talk-far/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Can%20CB%20Radios%20Talk%20Far%3F%20Real-World%20Range%20Explained&body=https%3A%2F%2Fcbradio.co.uk%2Fcan-cb-radios-talk-far%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/can-cb-radios-talk-far/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/can-cb-radios-talk-far/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/can-cb-radios-talk-far/?share=telegram) - **Categories:** Uncategorised --- ### [How to Set CB Squelch for Clearer Reception](https://cbradio.co.uk/how-to-set-cb-squelch/) **Published:** July 15, 2026 **Author:** **Excerpt:** Learn how to set CB squelch for quieter, clearer reception. Practical UK advice for mobile, 4x4 and homebase CB users in real conditions every day. **Content:** A CB that hisses constantly is not necessarily faulty. It is usually doing exactly what it should: receiving weak background noise, distant signals and electrical interference. Knowing **how to set CB squelch** lets you silence that unwanted noise while still hearing calls that matter, whether you are in a 4×4 convoy, on the road or using a homebase set-up. The right setting is rarely a fixed position on the knob. It changes with your aerial installation, location, vehicle electrics and how busy the channel is. Set it too low and the speaker never stops. Set it too high and weaker stations disappear before you ever hear them. ## What CB squelch actually does Squelch is a noise gate. When no usable signal is present, it mutes the radio’s speaker. When a received signal becomes strong enough to pass the level you have selected, the speaker opens and you hear the transmission. It does not increase transmit power, improve your aerial’s SWR, or make a weak station genuinely stronger. It simply decides how strong a received signal must be before your radio lets it through. That distinction matters. If reception is poor because of a badly sited aerial, a damaged coax lead or excessive ignition noise, turning the squelch control will only hide the symptoms. Most CB radios have a manual squelch knob, often marked SQL or SQ. Turned fully anticlockwise, the squelch is normally open and you will hear the channel noise. Turning it clockwise raises the threshold until the noise cuts out. Some sets also have automatic squelch, sometimes called ASQ, ASC or similar. This can be useful, but manual adjustment remains the best way to understand what your radio is hearing. ## How to set CB squelch step by step Start with the radio switched on, volume at a comfortable level and the [correct channel](https://cbradio.co.uk/cb-radio-channels-guide-uk-users/) selected. If your set has RF gain, leave it fully clockwise at first. RF gain affects receiver sensitivity, while squelch controls when the speaker opens. Mixing up the two is a common reason for missed calls. Turn the squelch control fully anticlockwise. You should hear a steady hiss, crackle or a mixture of background noise and distant activity. This is the receiver open to everything it can hear on that channel. Now turn the control clockwise slowly. Listen carefully rather than spinning it straight to the point where the speaker goes silent. Stop just after the background noise disappears. That is the usual working position: quiet when the channel is clear, but sensitive enough to open for weaker nearby stations. Give it a few seconds. Electrical interference from a vehicle can come and go with engine speed, cooling fans, LED lights or wipers. In a built-up area, the noise level can also vary as you move. If random bursts continue to open the speaker, increase the squelch a fraction. If a known station sounds as though the first word of each transmission is clipped, back it off slightly. The best check is a real call. Ask another station to transmit from a typical distance, rather than setting squelch only on a very strong radio parked beside you. For green laning or off-road groups, test it with a vehicle a short way down the track, perhaps around a bend or behind a rise. Those are the signals you need to hear, not just the loud ones. ## Set it for the job, not just silence A quiet cab is pleasant, but maximum silence is not always the aim. On a convoy run, use a lighter squelch setting than you would on a noisy open channel. The point of the radio is to catch a warning about a gate, obstacle, turn-off or stopped vehicle before it becomes a problem. A slightly occasional crackle is usually a fair trade for not missing a weaker call from the back of the group. For motorway or lorry-to-lorry use, conditions can be different. Aerial height, passing traffic and local electrical noise change constantly, so a setting that works at a service area may be too tight ten miles later. Check the squelch when conditions change, particularly after moving from open countryside into a town or industrial estate. At a homebase station, the receiver may be quieter than a mobile installation because there is no alternator, ignition system or vehicle wiring close by. However, domestic chargers, solar equipment, LED lighting and networking equipment can still create noise. Set the control with your usual household equipment running, not only when everything is switched off. ## Manual squelch versus automatic squelch Automatic squelch is convenient. On radios with a good implementation, it continually adjusts the threshold to suit the background noise level. It can be particularly handy for casual use, for drivers who do not want to keep adjusting controls, and for changing road conditions. There is a trade-off. Automatic systems do not know whether the faint signal buried in the noise is your mate at the rear of the convoy or unwanted interference. Some can be a little too eager to stay closed on weak signals, while others may open more often than you would choose manually. If your radio offers both modes, start with automatic squelch for day-to-day driving, then compare it with a carefully set manual position. For organised 4×4 trips and situations where every weaker call matters, many experienced users prefer manual control because they can deliberately leave the receiver slightly more open. ## Why a squelch setting may seem wrong If you need to turn the control far clockwise before the noise stops, or it opens repeatedly despite being set high, investigate the installation rather than assuming the radio needs replacing. Aerial and power supply issues often show up as apparent squelch problems. Check the aerial mount and earth bonding where applicable, the condition of the coaxial cable, connectors and the route of the cable through the vehicle. A pinched coax lead, loose plug or corroded mount can affect received signals as well as transmit performance. Check SWR before extended transmitting, particularly after fitting or moving an aerial. Vehicle-borne noise is another frequent culprit. If the noise changes with engine revs, it may be alternator-related. If it appears when accessories are switched on, test items such as USB chargers, dash cams, LED work lights and inverters one at a time. Powering the CB directly from the battery with a properly fused supply often reduces unwanted noise compared with using a convenient accessory socket. A poor external speaker position can also make a normal noise floor seem worse. In a loud vehicle, a clear [extension speaker](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/) mounted where you can hear it may be more useful than closing the squelch too aggressively. ## Common mistakes when setting CB squelch The first mistake is setting it while another very strong station is transmitting. A strong nearby signal will open almost any squelch setting, so wait for a clear channel before making the basic adjustment. The second is treating squelch as a volume control. If the transmission is too loud, turn down the volume. If it is distorted, investigate the speaker, radio settings or signal conditions. Squelch should only control when the audio opens. The third is using it to cure poor reception. If you can only hear stations when they are extremely close, reducing squelch may reveal more noise but it will not fix an aerial fault or poor installation. Start with a sound aerial system, correct SWR and clean connections. Finally, do not forget to re-check it. The ideal setting on a dry, quiet country lane may be unsuitable after dark in rain, in a city centre or when you have moved the aerial between vehicles. A quick adjustment is part of normal CB use, not a sign something has gone wrong. ## A practical setting for convoy use Before setting off, choose the agreed channel and have one vehicle transmit from a modest distance away. Open the squelch fully, then close it until the background noise just disappears. Ask the other driver to make a few short calls. If their speech opens the speaker cleanly every time, leave it there. If they have to repeat themselves, reduce the squelch slightly. You are looking for dependable communication, not a perfectly silent speaker. This is especially true on wooded lanes, rolling ground and off-road sites, where the signal can fade as vehicles turn, dip behind banks or spread out. A well-set squelch makes a CB far less tiring to use, but it should remain a light touch. Keep it just high enough to remove the constant noise, keep an ear open for weaker stations, and let the radio do the job it was fitted for. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-set-cb-squelch/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-set-cb-squelch/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-set-cb-squelch/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-set-cb-squelch/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Set%20CB%20Squelch%20for%20Clearer%20Reception&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-set-cb-squelch%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-set-cb-squelch/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-set-cb-squelch/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-set-cb-squelch/?share=telegram) - **Categories:** Uncategorised --- ### [Magnetic CB Antenna Review for UK Drivers](https://cbradio.co.uk/magnetic-cb-antenna-review-uk-drivers/) **Published:** July 13, 2026 **Author:** **Excerpt:** Our magnetic CB antenna review explains mount strength, aerial length, SWR tuning and vehicle fit, so you can choose a reliable mobile CB setup in the UK. **Content:** A magnetic mount aerial can have you on the air in an afternoon, with no drilling, no brackets and no permanent changes to the vehicle. That is the appeal, but a proper magnetic CB antenna review needs to look beyond the convenience. Mount quality, aerial length, cable routing and SWR setup decide whether it becomes a dependable part of your mobile station or a source of poor reports and frustration. For many UK 4×4 owners, occasional users and drivers who change vehicles regularly, a mag mount is the sensible starting point. It can also suit a car, van or lorry where fitting a body mount is not practical. The key is choosing a setup that matches the vehicle and the way you actually use CB. ## What a magnetic CB antenna does well A magnetic base uses powerful magnets to hold the aerial to a steel vehicle panel. The metal body then acts as the ground plane the aerial needs to radiate efficiently. Unlike a clamp or drilled mount, it does not need a hole in the bodywork, which makes it particularly useful on leased vehicles, family cars and vehicles that are only used for green laning or events at weekends. A decent magnetic mount should feel secure when fitted to a clean, flat steel roof or bonnet. It should have a protected base that does not trap grit against the paint, a properly moulded coax cable and a connector that suits the radio installation. The aerial itself should be flexible enough to cope with normal driving vibration, low branches and car park barriers without constantly needing attention. The other advantage is position. A roof-mounted aerial is usually higher and clearer than one fitted low on a bumper or spare-wheel carrier. Height helps a CB aerial see over nearby vehicles and hedges, while a central roof position gives a more even signal pattern in all directions. For convoy use, that can matter more than chasing the biggest advertised power figure. ## Magnetic CB antenna review: the compromises Mag mounts are not a magic answer. Their performance depends heavily on where they are placed and what they are attached to. A roof made from steel is ideal. An aluminium bonnet, fibreglass roof, plastic trim panel or roof section hidden beneath a panoramic glass panel is not. The magnet may not stick at all, or it may stick to an area too small to provide a useful ground plane. Modern vehicles can make this more complicated. Some have aluminium body panels, while others have roof rails, reinforcement bars or accessories that limit the available flat space. Before buying, check the actual panel with a small magnet rather than assuming it is steel. If there is no suitable panel, [a bracket mount](https://cbradio.co.uk/product/psm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van/) or a purpose-made no-ground-plane aerial may be the better route. Cable routing is another trade-off. The coax normally runs from the roof through a door or tailgate opening and into the cab. This is acceptable when done carefully, but do not crush the cable, trap it under sharp trim or repeatedly slam it in a heavy door. A damaged coax lead can raise SWR and reduce transmitted signal, even when the aerial looks fine from outside. There is also paintwork to consider. A magnetic base will not usually cause trouble if both the vehicle and underside of the mount are clean, but dirt is abrasive. Remove the mount before washing the vehicle, wipe the base and panel, and never slide it across the paint to reposition it. If the vehicle spends a lot of time off-road, inspect underneath the base more often because fine grit finds its way everywhere. ## Aerial length matters more than most buyers expect Short aerials are neat and convenient. They suit urban driving, low garages and vehicles that spend plenty of time under trees. However, a very short 27MHz CB aerial is always a compromise. CB wavelengths are long, so a compact aerial uses loading coils to make up for lost physical length. It can work well for local vehicle-to-vehicle contact, but it has less margin for imperfect mounting and may not match the range of a longer whip in open country. A medium-length aerial is often the best all-round choice for a 4×4 or everyday vehicle. It is long enough to provide worthwhile performance, yet manageable on rural lanes and on-road journeys. Longer whips generally offer the strongest potential performance when mounted properly, especially where open-road or rural communication is the priority. They are less convenient around branches, height barriers and multi-storey car parks. Rather than asking which aerial is best in absolute terms, ask where the vehicle goes. A compact mag mount can be exactly right for trail-day comms at modest distances. For regular convoy work across open terrain, a longer aerial on a strong base is usually worth the extra height. ## Why SWR still needs checking A magnetic aerial is not automatically tuned just because it is sold as a CB aerial. Some are supplied pre-tuned or broadly tuned for the UK CB bands, but the final SWR reading changes with the vehicle, mounting position and nearby metalwork. Checking it is basic good practice, not an optional extra for radio enthusiasts. SWR, or standing wave ratio, shows how well the aerial system is matched to the radio. A low reading means more of the radio’s output is being radiated. A high reading means energy is being reflected back towards the set, which can reduce range and potentially stress the transmitter if used for long periods. Use an SWR meter between the radio and aerial, test in an open area and take readings at the low and high ends of the band you intend to use. Keep people away from the aerial while testing and make sure doors, bonnet and tailgate are closed as they would be when driving. If the reading is higher than expected, start with the simple checks: confirm the mount is on clean steel, inspect the coax and PL-259 connector, and make sure the aerial is firmly seated in the base. Do not cut an aerial whip or coax cable at random in an attempt to cure a problem. Adjustments should follow the aerial maker’s instructions. On many mag mounts, moving the aerial to a better position makes more difference than any adjustment at the whip. ## Choosing a base that will stay put The magnet is not just a convenience feature. It is the part holding an aerial in place at motorway speed, in crosswinds and through the vibration of rough tracks. A larger, [quality magnetic base](https://cbradio.co.uk/product/super-strong-so239-magnetic-mag-mount-for-cb-aerial-ham-antenna-so-239-fitting/) generally offers better holding strength and can accommodate a more substantial aerial. That does not mean the largest base is required for every installation, but it does mean a tiny light-duty mount is a poor match for a long, heavy whip. Look at the intended aerial size, cable quality and connector arrangement as one system. A stronger base with thin, poorly finished coax is still a weak point. Equally, fitting a heavy high-performance aerial to a basic mount risks movement, cable strain and eventual failure. For normal road use, fit the mount centrally where possible and make sure it is properly seated before every trip. For serious off-road work, low branches and vibration may favour a more [permanent bracket system](https://cbradio.co.uk/product/cb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm/). A magnetic mount remains useful, but it is not always the toughest option for vehicles that regularly work hard in woodland or on demanding sites. ## Installation details that make a difference Start with a clean panel and place the mount down squarely rather than dropping it from height. Route the coax with enough slack at the aerial and at the radio end, but avoid loose loops around pedals, gear levers or airbag areas. Keep the cable away from hot exhaust sections and moving hinges. If the cable enters through a door aperture, check it after the first few journeys for pinching or flattened sections. Inside the cab, mount the CB where it can be reached without taking attention from the road. Connect the aerial directly to the radio or through an SWR meter when setting up. Once the system is tested, listen before transmitting and use the correct UK CB mode and channels for your radio. A well-fitted aerial will not compensate for poor radio discipline, but it gives every message a better chance of being heard clearly. ## Is a mag mount right for your vehicle? A magnetic aerial is a strong choice when you need a removable installation, have a suitable steel panel and want practical mobile CB performance without modifying the bodywork. It is particularly useful for beginners because it allows you to establish a working station, learn how aerial position affects SWR and decide later whether a permanent installation is worthwhile. It is less suitable where the vehicle lacks enough steel, the aerial must survive constant heavy off-road use, or cable routing through a door is unacceptable. In those cases, a body mount, gutter mount or dedicated vehicle bracket can offer a more permanent answer. The best setup is the one that stays secure, tunes correctly and suits your vehicle every time you use it. Take a few minutes to check the base, cable and SWR before the next run, and a magnetic CB aerial can remain one of the simplest ways to keep the convoy in touch. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/magnetic-cb-antenna-review-uk-drivers/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/magnetic-cb-antenna-review-uk-drivers/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/magnetic-cb-antenna-review-uk-drivers/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/magnetic-cb-antenna-review-uk-drivers/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Magnetic%20CB%20Antenna%20Review%20for%20UK%20Drivers&body=https%3A%2F%2Fcbradio.co.uk%2Fmagnetic-cb-antenna-review-uk-drivers%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/magnetic-cb-antenna-review-uk-drivers/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/magnetic-cb-antenna-review-uk-drivers/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/magnetic-cb-antenna-review-uk-drivers/?share=telegram) - **Categories:** Uncategorised --- ### [How to Ground a CB Antenna on Your 4x4](https://cbradio.co.uk/how-to-ground-cb-antenna/) **Published:** July 11, 2026 **Author:** **Excerpt:** Learn how to ground a CB antenna on a 4x4 or car, avoid common bonding faults, and check SWR for a clearer, reliable CB signal while travelling in Britain. **Content:** A CB aerial can look perfectly fitted yet perform badly because the mount is insulated from the vehicle body by paint, powder coating, plastic trim or corrosion. When people ask **how to ground CB antenna** installations, what they usually need is a sound RF ground plane and a properly bonded antenna mount – not simply a wire run to the battery negative. For most vehicle-mounted CB aerials, the metal bodywork acts as the other half of the antenna system. Get that connection right before adjusting the aerial or blaming the radio, and you give yourself a far better starting point for a low SWR and dependable on-road or off-road communication. ## What grounding a CB antenna actually means On a conventional mobile CB installation, the antenna whip is not the part you ground. The whip is the radiating element. The outer braid of the coaxial cable and the metalwork around the mount provide the return path, commonly called the ground plane. A large metal roof is usually the best ground plane because it is broad, central and electrically continuous with the vehicle shell. A wing, bonnet, tailgate, spare-wheel carrier or bumper mount can also work well, but these locations often need extra bonding. Hinges, rubber seals and painted brackets can prevent a proper electrical path even where the parts appear to touch. This is why a direct earth wire to the battery is not a cure-all. It may help bond a particular panel, but it cannot turn a small, isolated piece of metal into a full roof-sized ground plane. Think of bonding as making the vehicle’s metalwork electrically continuous. Think of the ground plane as the metal area the aerial can work against. There is one major exception. No Ground Plane, often marked NGP, aerial systems are designed for vehicles with little or no suitable metal ground plane, such as fibreglass-bodied vehicles, some motorhomes and certain plant machinery. An NGP aerial and its special coaxial cable are a matched system. Do not fit a standard aerial to NGP coax, and do not attempt to improve an NGP kit by grounding it like a conventional installation. ## Choose the mount before reaching for a bonding strap The best answer to how to ground a CB antenna starts with mounting position. If your vehicle allows it, a roof-mounted aerial using a proper through-roof mount generally gives the most predictable result. The mount is in direct contact with the largest area of steel, the aerial is clear of roof racks and body panels, and its radiation pattern is usually more even. That is not always practical on a working 4×4, pickup or lorry. A gutter mount, bonnet bracket or rear carrier mount may be the sensible choice when height restrictions, roof tents, roof racks or vehicle use rule out a roof hole. The trade-off is that you must pay more attention to bonding and aerial placement. Aerials mounted low beside a roof rack, jerry cans or a spare wheel can be partly screened in one direction. Avoid mounting a standard CB aerial directly onto plastic, fibreglass, rubber-isolated roof bars or a powder-coated accessory without providing a proper metal bond. Also check the antenna bracket itself. Many brackets have a painted or coated finish that needs removing only where the mount and bonding hardware make contact. ## How to ground a CB antenna mount on a vehicle Start by disconnecting the coax from the radio. You are working on the vehicle and mount, not transmitting, so there is no need for the set to be connected. First, inspect the mechanical fit. The antenna mount must be firmly attached and the centre pin must remain isolated from the bracket and vehicle body. On common SO-239-style mounts, the outer body of the socket grounds to the bracket, while the centre connection goes only to the antenna whip through the coax centre conductor. If those two parts are shorted together, the aerial will not work correctly. At the mounting point, remove a small amount of paint, coating or oxidation on the hidden contact face. You do not need to leave a visible bare patch on the outside of the vehicle. The aim is clean metal-to-metal contact beneath the bracket, washer or fixing bolt. A serrated star washer is useful because its teeth bite through light surface coating and maintain pressure. If the bracket attaches to a panel that is already welded or bolted directly to the body, that may be enough. If it is mounted on a bonnet, tailgate, rear door, swing-away carrier or tubular roof rack, add a short braided bonding strap from the bracket or panel to a solid part of the body or chassis. Keep the braid short, wide and direct. Flat tinned copper braid is preferable to a long, thin wire because it has lower RF impedance. Once the connection is tight, protect the exposed area from water and road salt. Apply suitable corrosion protection around the finished joint, not between the surfaces that need to conduct. Check the strap routing too: it should not snag, chafe through, restrict a hinge or sit against a sharp edge. A simple multimeter check can reveal obvious faults. With one probe on the outer shell of the antenna mount and the other on clean vehicle metal nearby, you should see very low resistance. Check again between the mount and a substantial chassis point. A reading close to zero is encouraging, but remember that a basic continuity test does not fully assess RF behaviour. It is still a useful way to find an insulated bracket or a poor hinge bond. ### Bonding common problem areas A bonnet-mounted aerial is popular on 4x4s because it is accessible and avoids roof height. However, many bonnets are isolated by hinges, paint and rubber buffers. Fit a bonding braid from the bonnet to the wing or inner wing, then ensure the bracket itself has bare-metal contact with the bonnet or wing structure. Rear-door and spare-wheel mounts are similarly prone to poor continuity. The door may be carried on painted hinges and may not bond reliably when open or closed. Use a flexible braid across the hinge area, leaving enough slack for full movement. On a swing-away carrier, bond the carrier to the chassis or body with a strap designed to move without fatigue. Roof-rack mounts need particular care. A rack may be aluminium, powder coated or isolated from the roof by plastic feet. Bonding the rack to the body can help, but an aerial mounted at one edge of a rack is still not the same as a central roof mount. It can be a good practical installation, just do not expect identical coverage in every direction. ## Route the coax properly The [coaxial lead](https://cbradio.co.uk/product/mini8-coax-cable-5m-rg8/) is part of the aerial system, so do not cut, join or coil it into a tight bundle simply to make it tidy. Route it away from sharp metal, hot exhaust components, moving pedals and high-current wiring where possible. Leave enough slack for doors, tailgates and bonnet movement, but avoid several tight loops of spare cable. Use a proper grommet whenever the cable passes through metal. Water ingress at the mount or a crushed coax lead can cause the same symptoms as a grounding fault: unstable SWR, poor transmit range and received noise. If the cable has been trapped under a hinge or pinched by a door, inspect it before retuning the aerial. ## Set and check SWR after bonding Grounding and tuning are linked, but they are not the same job. Every time you change the aerial position, add a bonding strap, alter the mount or move a roof rack, recheck the standing wave ratio. An aerial adjusted on one vehicle location may not be correctly tuned in another. Park in an open area, away from buildings, overhead wires and other vehicles. Fit an SWR meter between the radio and coax if your radio does not have a reliable built-in meter. Take readings on the lowest and highest channels used by your set, following the meter instructions exactly. A reading near 1.0:1 is excellent. Around 1.5:1 is generally very good for a mobile CB installation, while up to 2.0:1 is often usable. Do not transmit for extended periods if the SWR is high, especially above 3.0:1. High SWR can reduce performance and put strain on the transmitter’s final stage. If SWR is high across the band, inspect the mount, coax plugs, coax condition and bonding before trimming the aerial. If it is lower on the low channels and higher on the high channels, the aerial is usually too short. If it is higher on the low channels and lower on the high channels, it is usually too long. Make very small adjustments and retest. Never cut an aerial unless its instructions specifically allow trimming. ## Ground plane versus homebase earthing A homebase CB aerial needs a different approach. A vertical base antenna usually uses built-in radials or a designed ground-plane arrangement rather than the roof of a vehicle. The radio equipment may also need electrical safety earthing and surge protection, but that is separate from the antenna’s RF ground plane. Do not assume a mains earth is a substitute for correctly installed radials, and do not make changes to household electrical earthing unless you are qualified to do so. Keep outdoor antenna systems clear of power lines, use suitable weatherproof cable entry methods, and disconnect equipment during electrical storms if your setup does not have professionally installed lightning protection. A well-bonded mount is a small job that pays back every time you use the radio. Before spending money on a [bigger aerial](https://cbradio.co.uk/product/black-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial/) or amplifier, make sure the aerial you already have is mounted on clean metal, correctly bonded and checked with an SWR meter. If you are unsure whether your vehicle needs a conventional or NGP setup, the team at CB Radio UK can help you match the aerial system to the vehicle rather than guessing. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-ground-cb-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-ground-cb-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-ground-cb-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-ground-cb-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Ground%20a%20CB%20Antenna%20on%20Your%204x4&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-ground-cb-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-ground-cb-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-ground-cb-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-ground-cb-antenna/?share=telegram) - **Categories:** Uncategorised --- ### [Vehicle CB Mounting Guide for Better Results](https://cbradio.co.uk/vehicle-cb-mounting-guide/) **Published:** July 9, 2026 **Author:** **Excerpt:** Vehicle CB mounting guide for UK drivers, 4x4 owners and radio users. Learn where to mount your CB, avoid common mistakes and improve performance. **Content:** A CB that looks neatly fitted but performs badly usually comes down to one thing – where and how it was mounted. Any proper vehicle CB mounting guide has to start there, because the radio itself is only part of the setup. Mounting position, cable routing, earthing and antenna placement all affect how well your system works once you are out on the road, on site or off the beaten track. For some vehicles, fitting a CB is straightforward. A Defender with plenty of metal and simple trim gives you options. A modern SUV with plastics everywhere, tight dashboards and electrical clutter can be more awkward. That does not mean one vehicle is good and another is bad. It means the best mounting method depends on how you use the vehicle and what compromises you are willing to make. ## Vehicle CB mounting guide – start with the right location The first decision is where the radio body will sit. Most drivers instinctively look at the dashboard first, but that is not always the best answer. You need somewhere secure, reachable and ventilated, without putting the radio where knees, passengers or gear levers will constantly knock it. Under-dash mounting still works well in many 4x4s, vans and older vehicles. It keeps the set close to hand, the speaker is usually easy to hear, and microphone access is simple. The downside is legroom and visibility. In smaller cabins, an under-dash radio can feel like it is always in the way, especially if you regularly use low range, auxiliary switches or storage pockets in the same area. Overhead mounting suits off-road vehicles, work vans and some pickups, especially where a roof console or headlining shelf gives enough support. It gets the radio out of the way and can keep controls visible. The trade-off is that microphones and controls are slightly less convenient, and if the radio has a downward-facing speaker you may need an extension speaker to hear it properly over road noise. Seat-mount and centre-console positions can be tidy if space is limited. These are often chosen in newer vehicles where the dashboard offers very few flat surfaces. They work, but access matters. If you need to lean away from the driving position just to adjust the squelch, it soon becomes irritating. ## Think about daily use, not just the install A good fitment is not the one that looks smartest when parked on the drive. It is the one that still feels right after a few months of actual use. If you use the CB mainly in convoys, on green lanes or during events, quick access to volume and channel controls matters. If the set is there mostly for occasional road use, a more tucked-away install may be perfectly fine. It also depends on the type of radio. [Compact CB sets](https://cbradio.co.uk/product/anytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu/) are far easier to place in modern cabins than full-size units. If your vehicle has limited room, choosing the radio around the mounting position is often more sensible than buying the set first and hoping it will fit later. Microphone placement deserves the same level of thought. A mic clip fitted too low becomes a distraction. Too high, and the cable can swing across controls or vents. You want it to be easy to grab without taking your eyes off the road for long. ## Mounting brackets, fixings and vibration The bracket is not just there to hold the radio up. It has to keep it steady over rough tracks, speed bumps and everyday vibration. A weak mounting point will eventually loosen, rattle or crack trim. That is why metal support behind the panel matters more than a convenient-looking bit of plastic. Where possible, fix into a solid area of dash support, console frame or metal reinforcement. Self-tappers into thin plastic might hold for a while, but off-road use quickly exposes poor fitting. If you would not trust the mount on a washboard track, it probably is not good enough. There is also a balance between a rigid mount and one that remains adjustable. You want the set secure, but you also need to angle the front panel so it is readable and usable from the driving position. A mount that is technically solid but leaves the display facing the gear lever is not much use. ## Antenna position matters more than most people expect Any useful vehicle CB mounting guide needs to say this plainly – the antenna mount usually affects performance more than the radio mount. You can fit the smartest head unit in the world, but if the antenna is poorly placed, range and signal quality will suffer. For most mobile CB setups, higher and more central is better. Roof mounting on a metal roof generally gives the best all-round performance because it provides a better ground plane and a more even radiation pattern. That said, not everyone wants to drill a roof, and not every vehicle makes that practical. On 4x4s, bonnet mounts, gutter mounts, mirror mounts and rear body mounts are all common. Each has trade-offs. A bonnet mount is often tidy and easy to cable, but the body can shadow the signal. Rear mounts on spare wheel carriers or body corners are popular off-road, though they tend to favour signal in some directions more than others. Mirror mounts are common on larger vehicles, but they need proper support and earthing to work well. [Magnetic mounts](https://cbradio.co.uk/product/turbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread/) are useful if you want a removable setup or do not want to drill. On a steel roof they can work very well. The compromise is that the cable is more exposed, the mount can be disturbed by branches or careless handling, and it may not suit serious off-road use where the antenna takes more abuse. ## Earthing, SWR and why poor installs cause headaches A CB install that powers up is not necessarily a good install. One of the most common mistakes is treating antenna mounting as a purely mechanical job. It is not. Electrical performance matters just as much. Antenna mounts need proper earthing where the design requires it. Powder-coated brackets, painted bodywork and insulated fittings can all interrupt the ground path. That often shows up later as poor SWR readings, weak transmit performance or erratic reception. People then blame the radio, when the issue is really the mount or bonding. If you are fitting onto a bracket rather than directly to bare body metal, check the continuity properly. On some installs, a dedicated earth strap is the difference between a frustrating setup and one that works as it should. This is especially relevant on modern vehicles where panels, hinges and accessories are not always electrically ideal. Once fitted, the antenna should be checked and tuned with an [SWR meter](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/) if the aerial type requires adjustment. Skipping that step is false economy. A badly matched antenna system reduces performance and can put unnecessary strain on the radio. ## Cable routing without creating problems Good cable routing is half neatness and half reliability. The coax should be run where it is protected from crushing, sharp edges and repeated flexing. Door shuts, seat runners and tailgate hinges are common trouble spots. If the cable gets pinched or damaged, performance can drop off slowly or fail altogether. Avoid winding excess coax into a tight coil just to hide it away. That is a common habit and rarely the best approach. If cable length is wrong for the install, it is better to use the right lead or route it sensibly rather than bunching it under a seat. Power leads should be kept tidy and properly fused. In many cases, a direct supply route gives cleaner results than piggybacking onto whatever feed happens to be nearby. That said, vehicle and usage matter. A simple occasional-use setup may tolerate shortcuts better than a daily-use working vehicle that needs dependable performance in all conditions. ## Different vehicles need different answers A compact hatchback, a Discovery, a farm pickup and a motorway fleet van will not share the same best mounting solution. Interior space, body construction and intended use all change the answer. For green laning and off-road work, durability usually comes first. That means secure mounts, protected cable runs and antennas that can cope with branches and vibration. For road users and hobbyists, convenience and a cleaner-looking install may matter more. For commercial drivers, ease of use and reliable communication on long shifts often take priority. That is why a one-size-fits-all approach never really works. The best setup is the one that suits the vehicle, the operator and the type of driving being done. ## When to keep it simple There is a temptation to overbuild a CB installation, especially if you have spent time reading forums or looking at highly customised off-road rigs. Sometimes simple is better. A compact radio on a solid bracket, a well-mounted antenna and properly routed cables will outperform a more elaborate setup with poor basics. If you are buying parts for a first install, compatibility matters. Mount type, antenna length, vehicle body style and available space all need to line up. This is where a specialist supplier such as CB Radio UK can save a lot of trial and error, particularly if you are unsure whether a certain mount will suit your vehicle. A well-mounted CB should feel like part of the vehicle rather than an afterthought. Get the position right, respect the earthing and antenna side of the job, and the radio has a fair chance to do what you bought it for when it actually matters. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/vehicle-cb-mounting-guide/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/vehicle-cb-mounting-guide/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/vehicle-cb-mounting-guide/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/vehicle-cb-mounting-guide/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Vehicle%20CB%20Mounting%20Guide%20for%20Better%20Results&body=https%3A%2F%2Fcbradio.co.uk%2Fvehicle-cb-mounting-guide%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/vehicle-cb-mounting-guide/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/vehicle-cb-mounting-guide/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/vehicle-cb-mounting-guide/?share=telegram) - **Categories:** Uncategorised --- ### [Best Extension Speakers for CB Radios](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/) **Published:** July 7, 2026 **Author:** **Excerpt:** Find the best extension speakers for CB radios with practical advice on size, mounting, sound clarity and choosing the right speaker for use. **Content:** If you have ever missed half a transmission because your engine, tyres and road noise drowned it out, you already know why people look for the best extension speakers for CB. A decent radio can still sound poor if the built-in speaker is tucked under a dash, buried in a console or simply too small to cut through noise in a working vehicle or 4×4. An extension speaker is one of the simplest CB upgrades you can make, and often one of the most effective. It will not improve your signal strength or magically clean up a weak incoming transmission, but it can make speech easier to hear, especially in a noisy cab. For off-road use, plant machinery, vans, lorries and older vehicles with plenty of mechanical noise, that matters more than glossy specs. ## What makes the best extension speakers for CB? The short answer is clarity, not just volume. Plenty of speakers can go loud. That does not mean they are pleasant to listen to over a long day or that they make speech easier to understand. CB is mostly about voice communication, so a good extension speaker should help spoken words come through cleanly without sounding tinny, harsh or muffled. Size plays a part, but bigger is not always better. A larger speaker can often give fuller sound and a bit more depth, but in a cramped dashboard or roof-mounted installation, a compact speaker with good projection can be the smarter choice. In a Defender, pickup or working van, available mounting space usually decides more than brochure claims do. Build quality matters as well. A speaker that lives in a vehicle gets shaken, knocked, coated in dust and exposed to temperature changes. If it feels flimsy in your hand, it is unlikely to improve with age. A solid casing, tidy bracket and reliable cable are worth having, particularly if your setup is used every day rather than once a month. ## Why a CB extension speaker often works better than the built-in one Most built-in CB speakers are a compromise. The radio itself has to fit a certain size, and the speaker ends up small and in the wrong place. Mount a CB low in the dash and the sound may fire at your knees. Fit it in an overhead console and the audio can bounce around the cab rather than come directly at you. An extension speaker fixes the placement problem first. You can mount it nearer ear level, angle it towards the driver, or move it away from trim panels that absorb sound. That change alone can make a bigger difference than many people expect. There is also less strain on the radio’s own tiny speaker. Even when the output power is modest, a better external unit can present speech in a way that is easier to follow. That is particularly useful when another station has background hiss, fading audio or a microphone that is less than ideal. ## Choosing the right speaker for your type of setup The best extension speakers for CB use are not all the same because CB installations are not all the same. A speaker that works well in a quiet homebase shack may be disappointing in a muddy 4×4 with mud-terrain tyres humming away at 50 mph. ### For 4×4 and off-road vehicles In an off-road vehicle, durability and placement matter as much as sound. You want a speaker that can be mounted securely and aimed properly, even if the vehicle gets bounced about. Compact wedge-style speakers are often a good fit because they tuck neatly under the dash, on a transmission tunnel or under a roof shelf. The goal is clear voice audio without creating another thing to snag knees or kit bags on. If your cabin is particularly noisy, choose a speaker known for sharp voice reproduction rather than bass-heavy sound. CB does not need hi-fi warmth. It needs words you can understand first time. ### For lorries, vans and daily work vehicles Long hours behind the wheel put different demands on a speaker. Harsh audio gets tiring. For working vehicles, look for a model that stays clear at moderate volume and does not need to be cranked up all the time. A front-facing speaker mounted close to the driver is usually the best route. In bigger cabs, cable length becomes more relevant too. It is no use finding the right mounting point only to discover the supplied lead is too short for a tidy installation. It is a small detail, but one that saves hassle. ### For homebase CB setups A base-station user has more freedom. You are not fighting engine noise, so you can prioritise natural speech and comfortable listening over sheer projection. A larger desk-mounted or bracket-mounted speaker can work very well here, especially if your radio’s own speaker sounds boxed-in. That said, not everyone wants a large speaker sat beside the set. A compact external speaker is often enough if the main issue is simply poor direction of sound from the transceiver. ## Features worth paying attention to Speaker impedance and power handling should match what your CB radio expects, but most standard CB extension speakers are designed for straightforward compatibility. Where buyers often go wrong is focusing too much on wattage. For CB, the tuning of the speaker and the quality of speech reproduction are usually more important than chasing big numbers. The bracket deserves more attention than it gets. A poor bracket can vibrate, slip or make mounting awkward. A decent swivel bracket lets you aim the audio where you need it. In a vehicle, that can be the difference between hearing every call and still missing half of them. Some speakers include noise filters or are marketed for communications use rather than general audio use. That can be useful, but not every specialist-labelled speaker will automatically outperform a simpler model. It depends on the radio, the vehicle and where the speaker is fitted. ## Common mistakes when buying a CB extension speaker One common mistake is buying too large a speaker for the available space. It may look impressive on paper, but if it ends up mounted in a poor position because it physically will not fit where it should, you lose the benefit. Another is expecting the speaker to cure poor reception. If the incoming signal is weak, your aerial setup is off, or there is [electrical interference](https://cbradio.co.uk/how-to-reduce-cb-interference/) in the vehicle, a new speaker can only do so much. It improves what you hear from the radio. It does not repair problems elsewhere in the system. People also underestimate mounting position. Even a very good extension speaker can sound average if it is firing into carpet, trapped behind trim or pointed away from the listener. Before blaming the speaker, test a couple of positions if you can. ## Do you need a premium model? Sometimes yes, sometimes no. If you use CB casually in a fairly quiet vehicle, a sensible mid-range extension speaker may do the job perfectly well. If you spend all day in a noisy cab or rely on your radio regularly for convoy work, site coordination or off-road trips, paying more for better clarity and stronger construction is usually worthwhile. The useful way to think about it is not as a luxury extra, but as part of making the radio usable. There is little point investing in a good transceiver and [antenna setup](https://cbradio.co.uk/cb-aerial-types-explained/) if you still struggle to hear what is being said. ## Best extension speakers for CB buyers in the UK should ask these questions Before choosing a speaker, ask yourself where it will be mounted, how noisy the vehicle is, whether you need compact size or stronger output, and how tidy you want the installation to be. Those answers narrow the choice quickly. If you are fitting out a green lane lorry, challenge motor, farm vehicle or daily work van, practicality comes first. If it is for a homebase station, listening comfort matters more. Neither use is wrong, but they do point towards different products. At CB Radio UK, this is exactly where specialist advice helps. A generic audio speaker is not always the right answer for CB use, and a communications speaker that works brilliantly in one cab may be overkill in another. ## Installation matters as much as the speaker itself Keep the [cable run tidy](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/) and away from places where it can be pinched or pulled. Use the supplied bracket properly rather than balancing the speaker somewhere temporary and calling it done. A secure install reduces rattles and keeps the sound consistent. Try to position the speaker where it projects towards your ears rather than into the footwell or windscreen. In many vehicles, a small change in angle makes a noticeable difference. If the first location sounds flat, move it before deciding the speaker is the problem. A good extension speaker should make your CB easier to live with every time you switch it on. If you choose for your actual vehicle, your actual noise level and your actual mounting space, you will usually end up happier than if you buy by size or spec sheet alone. The right speaker is the one that lets you catch the call first time, without reaching for the volume every few minutes. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Best%20Extension%20Speakers%20for%20CB%20Radios&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-extension-speakers-for-cb-radios%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-extension-speakers-for-cb-radios/?share=telegram) - **Categories:** Uncategorised --- ### [8 Best CB Microphones for Clarity](https://cbradio.co.uk/best-cb-microphones-for-clarity/) **Published:** July 5, 2026 **Author:** **Excerpt:** Find the best CB microphones for clarity with practical advice on power, noise rejection, fit and matching the right mic to your radio setup. **Content:** A muddy-sounding CB setup can make even a strong radio and well-tuned aerial feel disappointing. If you are searching for the best CB microphones for clarity, the aim is not just louder audio – it is cleaner, more intelligible speech that cuts through road noise, engine rumble and general background hash. For most UK users, that means choosing a microphone that suits how and where you actually operate. A mic that sounds excellent in a quiet homebase can be the wrong choice in a [Defender](https://cbradio.co.uk/product/large-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110/), a tractor cab or a working van. Equally, a powered microphone that adds punch on one radio can sound overdriven on another. Getting this right is less about chasing the most expensive option and more about proper matching. ## What makes a CB microphone sound clear? Clarity starts with the microphone element itself, but it does not end there. The radio’s audio stage, your mic gain settings if fitted, your distance from the mic, and the amount of cabin noise all play a part. That is why two operators can use the same microphone and get very different reports. In simple terms, clearer audio usually comes from a microphone that keeps your voice natural, controls background noise reasonably well, and does not force the radio into distortion. Some microphones are tuned to boost midrange speech frequencies, which helps your voice cut through. Others aim for a fuller sound, which can be pleasant on a base setup but not always ideal in a noisy mobile installation. Build quality matters too. Cheap hand mics can suffer from inconsistent audio, weak strain relief, noisy switches and patchy wiring. A better microphone tends to give more predictable results and survive regular use. ## Best CB microphones for clarity – the main types There is no single winner for every installation. The best CB microphones for clarity usually fall into a few broad groups, each with its own strengths. ### Standard dynamic microphones A good standard dynamic mic is still one of the safest choices for clean, dependable speech. These are straightforward, require no battery, and often produce natural audio without too much fiddling. If your radio already has healthy transmit audio, a standard dynamic hand mic can be the best answer. For 4×4 users and daily drivers, this type often makes the most sense. It is simple, durable and less likely to push your transmit audio too hard. If you want reliability over gimmicks, start here. ### Power microphones Power mics include internal amplification, usually powered by a battery. They can add extra drive and presence, which helps on radios with lower mic gain or softer audio. Used properly, they can improve intelligibility. Used badly, they can make you sound harsh, splattery or distorted. This is where trade-offs matter. A powered mic can work very well in a mobile setup, but only if the gain is set sensibly and the radio is happy with it. Too much gain is one of the quickest ways to lose clarity. ### Noise-cancelling microphones If you operate in a noisy cab, off-road vehicle, plant machinery or open-top environment, noise-cancelling microphones deserve serious attention. These are designed to reduce surrounding noise and favour close-spoken voice audio. They are not always the most flattering-sounding microphones in a quiet setting, but they can be the clearest option where background noise is the real problem. For many working users, a noise-cancelling mic is more useful than a hi-fi sounding one. ### Echo and effects microphones These are popular in some parts of the hobby, but if your only priority is clarity, they are rarely the first recommendation. Echo, reverb and other effects can be entertaining, yet they tend to reduce plain intelligibility. If you want people to understand you first time, keep it simple. ## How to choose the right mic for your setup The biggest mistake is buying by reputation alone. A microphone that is highly rated on one radio may be underwhelming on another. Connector wiring, impedance, gain structure and intended use all matter. Start with your environment. If you are mostly in a quiet vehicle or a homebase station, a standard dynamic mic or a carefully adjusted power mic can work well. If you spend your time in a noisy diesel 4×4, on green lanes, or in a lorry with a lot of background sound, a noise-cancelling microphone is usually the better place to look. Then consider your radio. Some sets already have strong transmit audio and do not need extra help. Others can benefit from a little more mic output. If your radio is known for punchy audio, adding an aggressive power mic may do more harm than good. Practical fit also matters. A heavy microphone with lots of controls may sound fine, but if it is awkward to hold while driving, that soon becomes a nuisance. A compact hand mic with a positive PTT switch is often the better day-to-day choice. ## Features worth paying for Not every extra feature improves clarity, but a few are genuinely useful. A gain control on a power microphone is worthwhile because it lets you fine-tune output instead of running flat out. Strong cable strain relief helps prevent broken wires at the plug or mic body, especially in mobile use. Good switch quality matters more than many buyers realise, because a scratchy or unreliable PTT will ruin confidence in the whole setup. Noise rejection is another feature worth prioritising if you operate on the move. In a quiet shack, you may prefer a fuller-sounding mic. In a vehicle, less background noise is usually the bigger win. Replaceable batteries are also worth considering on powered mics. If a mic becomes weak or inconsistent because of a tired battery, your audio reports will suffer. A simple setup with easy maintenance often stays clearer in the long run. ## Common mistakes when chasing clearer audio A surprising number of clarity problems are not microphone faults at all. Operators often sit too far from the mic, speak across it rather than into it, or hold it in a different position every time they key up. Consistency helps. Overdriving is another common issue. Many users fit a power mic, turn the gain up high and assume louder means better. It does not. Once the audio starts to distort, readability drops quickly. A slightly lower level with clean speech nearly always wins. There is also the question of wiring. CB microphones are not universally wired the same way. Even if the plug fits, the wiring may not. A badly wired or wrongly pinned microphone can cause poor audio, transmit faults or no transmit at all. This is one area where specialist support and proper [mic wiring information](https://cbradio.co.uk/product/7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio/) save a lot of frustration. Poor radio setup can get the blame too. If the radio itself has a fault, low modulation, or a problem in the audio stage, changing microphones may not fix it. The same applies if your speaker or local monitoring method is misleading you. ## Matching microphone style to real-world use For a casual hobbyist running a tidy home station, a quality standard mic often gives the cleanest and most natural results. You do not necessarily need extra gain, and too much processing can make a nice-sounding setup worse. For green laning groups and convoy use, clarity under rough conditions matters more than rich audio. A sturdy microphone with decent noise rejection usually makes more sense than something fancy. The same goes for agricultural and utility vehicles, where engine and vibration noise are constant companions. For long-distance drivers, comfort counts. If you are on the radio regularly, choose a microphone that feels right in the hand and has a positive switch action. Clear audio is not only about lab specs. It is also about a mic you can use properly every day. ## When a premium mic is worth it There is a point where spending more buys genuinely better results, but only if the rest of the station is up to the job. Better materials, better audio consistency and stronger build quality are all worth having. On the other hand, fitting an expensive microphone to a poorly set up radio in a noisy vehicle will not create miracles. A sensible approach is to improve the weakest part of the chain first. If your current hand mic is flimsy, dull-sounding or unreliable, an upgrade is worthwhile. If your existing mic is decent but your audio is still poor, look at radio settings, wiring, and operating technique before spending more. That is usually the difference between buying well and buying twice. ## A practical way to decide If you want the shortest route to better transmit audio, decide first whether your problem is lack of level or lack of intelligibility. If people say you are too quiet but otherwise clean, a modestly adjusted power mic may help. If they say you are noisy, muffled or buried under engine sound, a noise-cancelling microphone is the smarter move. If you are unsure, stick with a well-made standard or noise-reducing mic from a [proper CB specialist](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/) rather than chasing novelty features. That approach suits most UK users, especially those running mobile installations where durability and straightforward performance matter most. At CB Radio UK, that is generally the advice we come back to time and again: choose for the job, not the hype. The clearest microphone is the one that matches your radio, your vehicle and the way you actually use the set – and if you get that part right, your audio reports usually improve very quickly. A good CB microphone should make your voice easier to understand, not just louder. Keep that as the target, and you will end up with a setup that works properly when it matters. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-microphones-for-clarity/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-microphones-for-clarity/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-microphones-for-clarity/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-microphones-for-clarity/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%208%20Best%20CB%20Microphones%20for%20Clarity&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-microphones-for-clarity%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-microphones-for-clarity/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-microphones-for-clarity/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-microphones-for-clarity/?share=telegram) - **Categories:** Uncategorised --- ### [Can CB Radios Work Off Road?](https://cbradio.co.uk/can-cb-radios-work-off-road/) **Published:** July 3, 2026 **Author:** **Excerpt:** Can CB radios work off road? Yes - with the right aerial, mounting and setup, they remain a practical choice for 4x4 groups and green laning trips. **Content:** You realise how useful radio comms are the moment the convoy stretches out, the lead vehicle disappears over a rise, and mobile signal drops to nothing. That is usually when people ask: can CB radios work off road? The short answer is yes, and in the right setup they still make very good sense for 4×4 groups, green laning, pay and play days, and rural convoy driving across the UK. The longer answer is that off-road use puts different demands on a CB system than motorway driving or homebase chatting. Range can change quickly, terrain gets in the way, vehicles take a hammering, and a poor aerial install will show its weaknesses fast. So the real question is not just whether CB works off road, but how well it works when fitted properly. ## Can CB radios work off road in real conditions? Yes, they can, and they do. CB radios are still widely used by off-roaders because they are simple, vehicle-friendly and built for short-range communication. If your goal is to speak to other vehicles in your group, call out obstacles, warn about route changes or ask for recovery help a short distance away, CB is often more than enough. That said, expectations matter. CB is not a replacement for a mobile phone when you need to ring home, and it is not a magic long-distance system that cuts through every hill, forest track and quarry wall. Off road, the job is usually vehicle-to-vehicle comms across a convoy or local area. For that, CB remains practical. In open ground, a decent setup can perform very well. In wooded areas, valleys, steep lanes or deep mud pits with lots of metal and terrain blocking the path, range will reduce. That is normal. Radio performance off road always depends on line of sight, aerial quality, radio installation and how much interference your vehicle creates. ## Why CB still suits 4×4 and off-road use Off-road driving needs communication that is immediate and shared. If one driver spots a washout, a gate, a low branch or a vehicle stuck on an incline, the whole group needs to hear it at once. That is where CB is useful. You key the mic and everyone listening on the channel hears the message straight away. That is different from mobile apps or one-to-one calls, which depend on signal and can slow things down. In rough ground, simple often wins. A fixed radio in the cab, a properly mounted aerial and a clear speaker can be easier to use than reaching for a handset or staring at a phone screen. CB also suits the practical side of off-road ownership. Equipment is widely available, straightforward to power from a vehicle, and flexible enough for everything from basic starter kits to more advanced installs with upgraded microphones, extension speakers and heavier-duty mounting options. For many users, it is still the easiest way to add dependable short-range comms to a 4×4. ## What affects off-road CB performance most? The aerial matters more than the radio in most cases. That catches some newcomers out. They focus on the transceiver and buy the cheapest antenna they can find, then wonder why the setup struggles. If you want better performance off road, start with the [aerial choice](https://cbradio.co.uk/product/mini-stinger-green-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/), mounting position and tuning. Height helps. Aerials generally work better when they are mounted as high and as clear as possible. On a 4×4, that often means a gutter mount, mirror-style position, roof area, rear body mount or a solid bracket on the vehicle where the whip has room to work. If the aerial is tucked too low behind bodywork, spare wheels or metal accessories, performance can suffer. Vehicle type also changes the result. A soft-top, pickup, estate-based 4×4 and full metal-bodied off-roader all behave differently as radio platforms. The available ground plane, body shape and mounting points affect how the aerial performs. There is no single perfect setup for every vehicle. Then there is terrain. Mud, rain and rough tracks do not stop CB from working, but hills, dense woodland and quarry faces can reduce range quickly. Off road, you are often dealing with broken line of sight. That is why a realistic setup with a good aerial is more important than chasing exaggerated range claims. ## Choosing the right CB setup for off road If you are using CB mainly for convoy work, reliability is usually more important than loads of extra features. A compact, easy-to-operate [mobile radio](https://cbradio.co.uk/product/midland-cb-radio-m-mini-usb-uk-eu-am-fm/) is often the best fit. You want clear controls, solid build quality and a microphone that can take regular use with muddy hands and bouncing suspension. For many off-road vehicles, a starter kit makes sense if you are beginning from scratch. A matched radio and aerial package can take some guesswork out of the process. It also helps ensure you have the basics covered, including mounting hardware, leads and accessories needed to get on air properly. Aerial choice needs a bit more thought. A short antenna may be easier in low branches or height-restricted areas, but there is usually a trade-off in performance compared with a longer, well-positioned whip. A longer aerial can work better, yet it must be mounted securely enough to handle vibration, flex and occasional contact with obstacles. This is where off-road use differs from ordinary road use. You are not just fitting for signal. You are fitting for punishment. Mounts loosen, cables rub, branches catch aerials and water gets everywhere. A setup that looks fine on the drive can fail quickly on the trail if it has not been installed with real use in mind. ## Installation matters more off road A poor install will often show itself faster off road than on tarmac. Constant vibration can work connectors loose. Cheap brackets can flex too much. Routing cables carelessly can lead to pinching, chafing or electrical noise. If the radio cuts out every time the vehicle twists over ruts, it is not much use. Power should be taken properly, with sensible wiring and a clean connection. The radio itself should be mounted somewhere secure but still easy to reach. You do not want to be fumbling under the dash when you need to warn the rest of the group about a sudden drop or blocked lane. Speaker quality is worth thinking about too. Off-road vehicles are noisy. Tyres hum, diesel engines rattle, snorkels drone and loose kit shifts about. If your built-in speaker gets buried under all that, an extension speaker can make a real difference to clarity. [Tuning](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/) is another part that should not be skipped. An aerial that is not set up correctly can leave you with poor transmit performance and frustration that gets blamed on the radio itself. A properly tuned aerial helps the whole system work as it should. ## Can CB radios work off road better than handhelds? Sometimes yes, sometimes no. It depends on how you use them. A fixed mobile CB with an external aerial will usually outperform a handheld radio used inside a vehicle. The vehicle body can block signal, handheld aerials are limited, and battery life becomes another thing to manage. For regular off-road use, a proper in-vehicle CB setup is usually the better choice. Handhelds still have their place. They are handy for spotters outside the vehicle, campsite use, temporary setups or occasional users who do not want a full install. But if you want dependable convoy comms from inside the cab, a mobile CB radio with a proper vehicle aerial is the stronger option more often than not. ## Common mistakes off-road users make The biggest mistake is assuming any CB will do as long as it powers on. Off road, the details matter. Weak mounts, poor earths, badly routed coax and bargain-bin antennas often lead to disappointing results. Another mistake is expecting too much range in difficult terrain. If you are in a wooded valley with steep banks and several vehicles spread out around bends, no CB setup is going to behave as though it is on flat open ground. Good users work with the conditions, keep messages short and position vehicles sensibly. Finally, some drivers leave communication as an afterthought until the day they actually need it. By then, there is no time to sort out noise issues, poor tuning or a loose mount. It is better to get the setup right before the trip and test it properly. ## Is CB still worth it for UK off-roaders? For plenty of UK 4×4 owners, yes. If your driving involves group runs, green lanes, site days, farm tracks or rural areas where phone coverage is patchy, CB remains a sensible tool. It is quick to use, familiar to many drivers and well suited to short-range group communication. It is not the answer to every communication need, and some users may prefer other radio options for specific situations. But CB has lasted in the off-road world for a reason. It is practical, affordable and proven when installed properly. If you are unsure what suits your vehicle, it is worth speaking to a specialist such as CB Radio UK before buying. The right radio is only half the story. The right aerial, mount and installation approach are what make a CB setup genuinely useful off road. A good off-road radio setup should feel boring in the best possible way – always there, easy to use, and ready when the track gets awkward. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/can-cb-radios-work-off-road/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/can-cb-radios-work-off-road/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/can-cb-radios-work-off-road/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/can-cb-radios-work-off-road/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Can%20CB%20Radios%20Work%20Off%20Road%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fcan-cb-radios-work-off-road%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/can-cb-radios-work-off-road/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/can-cb-radios-work-off-road/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/can-cb-radios-work-off-road/?share=telegram) - **Categories:** Uncategorised --- ### [CB Handheld Radio Review for UK Users](https://cbradio.co.uk/cb-handheld-radio-review-uk-users/) **Published:** July 1, 2026 **Author:** **Excerpt:** A practical cb handheld radio review for UK users, covering range, battery life, legal use, vehicle pairing and whether a handheld is worth buying. **Content:** A handheld CB sounds ideal until you actually rely on one halfway up a muddy lane, in a convoy, or on a long road run with patchy mobile signal. That is where a proper CB handheld radio review needs to be more than a spec sheet. For most UK buyers, the real question is not whether a handheld CB works at all, but whether it works well enough for the way you use it. If you are buying for green laning, site work, events, farm use or keeping in the cab as a backup, a handheld CB can make very good sense. If you expect it to perform like a full mobile rig with a roof-mounted aerial, you will usually be disappointed. The difference comes down to power, aerial efficiency, battery endurance and where you are using it. ## CB handheld radio review – what matters most The first thing to get straight is that most handheld CB sets are compromise radios by design. They are built for convenience, portability and quick deployment, not maximum range. That does not make them poor radios. It just means they need to be judged on the right criteria. In practical use, three things matter more than flashy features. The first is audio clarity. A handheld can have every menu option going, but if the speaker is weak or the microphone sounds muffled in wind, it becomes frustrating very quickly. The second is battery performance. A set that lasts a full day out on the lanes is far more useful than one that needs charging by lunchtime. The third is aerial setup. This is the part many buyers underestimate. A CB handheld with its standard rubber aerial will often be fine for short convoy work, marshalling, event use and close vehicle-to-vehicle chat. Once you start stretching distance, especially in wooded, hilly or built-up areas, performance drops off. That is not a fault with one brand or model. It is simply the reality of a small handheld aerial on legal CB power. ## Where handheld CB radios work well For 4×4 groups, a handheld is often at its best outside the vehicle rather than inside it. Spotting another driver through an obstacle, guiding someone on a recovery, or coordinating a group at a pay-and-play site are exactly the kind of jobs these sets suit. You can clip one to a jacket, keep it in a grab bag, or hand it to a passenger without needing a fixed install. They also suit occasional users who do not want to wire a full radio into a vehicle. If you use CB a handful of times a year, a handheld avoids the cost and effort of fitting a mobile set, coax run and external antenna mount. That matters for leased vehicles, shared vehicles, or anyone who wants a simple ready-to-go option. As a backup radio, they are useful too. Plenty of experienced users run a proper in-vehicle CB as the main setup and keep a handheld charged as insurance. If you need to leave the vehicle, direct traffic, help another driver or deal with a breakdown away from the cab, a handheld still has a place. ## Where they fall short This is where any honest CB handheld radio review has to be blunt. Inside a vehicle, using the standard aerial, most handheld CBs are operating at a disadvantage. The metal bodywork shields signal, the aerial is low down, and the radio itself is not getting the benefit of a tuned external antenna. That means range can be quite modest in real-world conditions. In an open area with a clear path between users, you may get decent local coverage. In hilly countryside, urban areas or dense woodland, results will vary sharply. Buyers sometimes assume a handheld will cover the same ground as a fixed mobile setup. It usually will not. Battery life can also be a weak point depending on the radio and how you use it. A set left scanning all day, turned up loud, and transmitting regularly will drain faster than many beginners expect. Replaceable battery packs are handy. USB charging is handy as well, particularly if you spend a lot of time in the vehicle and want to top up from a 12V supply. ## What to look for before you buy A good handheld CB should feel solid in the hand and not overly fiddly to operate with gloves on or in poor weather. Large channel controls, a clear display and a sensible menu matter more than novelty extras. If you need to change channel quickly in a moving group, awkward button combinations get old very fast. Speaker volume is worth checking carefully. Off-road vehicles, plant machinery and older diesel cabs are not quiet places. A radio that sounds fine indoors can struggle once engine noise, tyres and rain start competing with it. Accessory support is another big point. The better handheld options tend to make more sense when paired with the right extras, such as a speaker mic, vehicle charger lead, rechargeable pack or adaptor for an external antenna. That last one can transform a handheld from a [short-range convenience set](https://cbradio.co.uk/how-to-improve-cb-reception/) into something much more practical when used in or around a vehicle. ## Handheld CB versus a mobile CB For many customers, this is the real buying decision. If CB is going to be a regular part of your setup, a proper mobile radio with a well-matched external aerial is still the stronger choice. You will normally get better transmit and receive performance, stronger audio, easier controls and less worry about battery life. A handheld wins on flexibility. You can carry it, lend it, store it easily and use it away from the vehicle. It is often the better option for occasional use, temporary use, events and backup duties. It is also a sensible entry point if you are not ready to commit to a full install. So it depends on the job. For leading convoys every weekend, fitting a permanent set is usually money better spent. For casual lane days, marshalling, farming tasks, site communication or keeping something ready in the glovebox, a handheld can be exactly the right tool. ## A realistic view on range Range is the question everyone asks and the one that needs the most realistic answer. There is no single number that means much on its own. Terrain, weather, obstacles, aerial choice, mounting position and even how you hold the radio all affect results. Handheld to handheld, both on standard antennas, is generally best thought of as short-range communication. Sometimes that will be all you need. If your group stays reasonably close, that is not a problem. If you need reliable communication over greater distance, especially vehicle to vehicle, using an [external antenna adaptor](https://cbradio.co.uk/how-to-mount-cb-aerial/) makes a noticeable difference. That is why experienced buyers often treat the supplied rubber aerial as a convenience option rather than the final setup. It works, but it is not the best you can get from the radio. ## Legal use in the UK UK buyers should make sure they are buying a CB handheld suited to legal UK operation and channel requirements. This is not the area to guess your way through. A radio may look right online and still not be the best fit for UK use. It also pays to check whether the unit is aimed at casual PMR-style expectations or genuine CB use with the right modes and standards. If you are unsure, specialist advice is worth having before you spend money on the wrong type of handheld or the wrong accessories to go with it. ## Is a handheld CB worth it? Yes, if you buy it for the right reasons. A handheld CB is not a magic substitute for a hard-wired mobile radio and a properly installed antenna system. It is a practical, flexible bit of kit that suits short-range work, off-road support, backup use and buyers who value portability more than outright performance. The best results come when expectations match the hardware. If you want a radio to keep a convoy organised, guide another vehicle, step out of the cab and stay in touch, or have a simple set ready for occasional use, a handheld earns its place. If maximum range is your priority, go [fixed-mount](https://cbradio.co.uk/product/pni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w/) instead. At CB Radio UK, this is usually the point where a quick conversation saves a poor purchase. The right handheld, with the right battery setup and the right aerial option, can be a very useful bit of kit. Buy for how you actually use your radio, not for the promise on the box, and you will be much happier with what ends up in your hand. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-handheld-radio-review-uk-users/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-handheld-radio-review-uk-users/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-handheld-radio-review-uk-users/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-handheld-radio-review-uk-users/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Handheld%20Radio%20Review%20for%20UK%20Users&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-handheld-radio-review-uk-users%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-handheld-radio-review-uk-users/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-handheld-radio-review-uk-users/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-handheld-radio-review-uk-users/?share=telegram) - **Categories:** Uncategorised --- ### [CB Manuals and Wiring Diagrams Explained](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/) **Published:** June 29, 2026 **Author:** **Excerpt:** CB manuals and wiring diagrams help you install, fault-find and match radios, mics and power leads properly for safer, more reliable use. **Content:** A CB that powers up but gives no audio, a microphone that keys up but will not transmit properly, or a mobile set that blows a fuse the moment it is connected – these are the jobs where CB manuals and wiring diagrams stop being nice to have and start being essential. If you run a 4×4, a working vehicle, or a homebase setup, the right manual can save hours of guesswork and stop a simple wiring mistake turning into an expensive repair. The problem is that people often treat all wiring diagrams as interchangeable. They are not. Even radios that look similar on the front can have different microphone pin-outs, different power arrangements, and different connections for external speakers or accessories. A diagram only helps when it matches the exact make and model in front of you. ## Why CB manuals and wiring diagrams matter A proper manual does more than show where the wires go. It usually gives you the power requirements, fuse rating, microphone wiring, antenna connection details, operating controls, and in some cases basic fault-finding steps. For anyone fitting a radio into a Land Rover, pickup, van or lorry, that matters because space is tight and wiring runs are often less tidy than they look on paper. Wiring diagrams are especially useful when you are doing one of three jobs. The first is installation from scratch, where you need to know the correct power polarity, fuse placement and microphone connections. The second is replacing parts, such as a mic, extension speaker or power lead. The third is fault-finding, where you need to trace what should be happening before you can work out what is not. This is where a specialist supplier earns its keep. General electronics advice is often too vague for CB kit. CB radios have their own quirks, and the details matter. ## What a good CB manual should tell you At minimum, a useful manual should identify the radio clearly, show the controls, and give basic connection information. For most users, the first pages are the ones that count – power input, antenna socket, microphone socket, speaker output and any menu or mode settings that affect operation. If you are fitting a radio into a vehicle, pay close attention to the supply voltage and current draw. Most mobile CB sets are 12V, but that does not mean every wiring arrangement is the same. Some users wire direct to the battery for clean power. Others use an accessory feed so the radio switches off with the ignition. Neither is automatically right in every case. It depends on the vehicle, the radio, and whether you want the set available when parked. A manual should also make clear whether the radio needs a specific fuse value. Fitting a larger fuse because it is what you had in the toolbox is poor practice. The fuse is there to protect the radio and the wiring, not just to stop nuisance failures. ### The sections most people skip Plenty of users ignore the parts of the manual that look less interesting, then end up chasing faults later. The [microphone wiring](https://cbradio.co.uk/product/8-pin-mic-microphone-plug-cb-or-ham-radio/) section is a good example. If you are replacing a damaged mic or fitting an aftermarket one, pin configuration matters. Get it wrong and you may end up with no transmit audio, no receive audio, constant transmit, or no channel change functions on radios that use microphone controls. The same goes for [external speaker wiring](https://cbradio.co.uk/cb-extension-speaker-for-car-use/). An extension speaker can improve clarity in a noisy cab, but only if the impedance and connection are suitable for the set. A manual will often tell you what the radio expects. Guessing can leave you with weak audio or, in some cases, a damaged output stage. ## Using wiring diagrams without making things worse A wiring diagram is only useful if you read it carefully. Start with the exact model number, not just the brand name. Manufacturers often release several versions of what looks like the same set, and microphone wiring can change between them. Next, look at the diagram as a map of functions, not just colours. Wire colours are helpful, but they are not always consistent across replacement mics, repair looms or older radios that may already have been altered. Pin 1 on one mic may not do the same job as pin 1 on another. The function – transmit, receive, audio, earth, channel up or down – is what matters. Before connecting anything, use a meter if you can. Continuity checks on a microphone lead or power cable can confirm whether the wiring matches the diagram. That is far better than plugging it in and hoping for the best. On older sets, especially second-hand equipment, assume nothing. Plenty of radios have been repaired, modified or badly rewired over the years. ### Common mistakes with CB wiring diagrams The most common error is relying on a diagram that is close enough. Close enough does not count when you are dealing with microphone pin-outs or power polarity. Another regular mistake is trusting wire colours over the actual pin numbering. Colours can vary. Pin positions and functions are the safer reference point. People also get caught out by poor-quality diagrams copied from forums or old scans where the labels are barely readable. If you cannot clearly identify the pin numbers or connector orientation, stop there. A reversed view of a plug, looking from the solder side instead of the front, is enough to turn a simple mic rewire into a frustrating afternoon. ## When you need a manual and when you need a technician Not every issue can be solved with paperwork. Manuals and diagrams are ideal for setup, routine replacement and straightforward fault-finding. They are less helpful once you move into component-level faults inside the radio. For example, if a set has correct power, a known good microphone, a sound antenna system and still shows odd transmit or receive behaviour, the fault may be on the board rather than in the wiring. At that stage, opening the radio without the right knowledge can make things worse. Some checks are sensible for any competent user, but full internal repair is another matter. That is why it helps to separate installation faults from equipment faults. If the radio is not switching on, start with supply voltage, fuse, polarity and power lead condition. If it switches on but has no transmit audio, the microphone wiring and socket are obvious suspects. If SWR is poor, look at [the aerial, mount, coax](https://cbradio.co.uk/product/straight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90/) and earthing arrangements before blaming the radio itself. The manual gets you through the logical checks. It does not replace sound judgement. ## Matching manuals to real-world installs Vehicle installations rarely look like the neat drawings in a booklet. In a 4×4 or working vehicle, you may be routing cables around trim, under seats, through bulkheads and past other electrical gear. That can introduce noise, poor earths and cable strain that the manual only hints at. This is where a diagram needs to be combined with practical sense. Keep power runs tidy, protect cables where they pass through metal, and avoid crushing coax behind brackets or trim panels. If the radio is mounted in a spot that gets damp, dusty or knocked about, pay attention to connectors and strain relief. A correct wiring diagram will tell you where to connect things. It will not stop poor installation habits causing trouble later. For homebase users, the same principle applies. Bench power supplies, extension speakers, desk microphones and external antennas all need to be matched correctly. A home setup may feel easier because you are not working inside a vehicle, but it still pays to check ratings and connections rather than making assumptions. ## Keeping the right reference at hand The best time to find the correct manual is before you need it in a hurry. Keep a copy for the exact radio model, plus any microphone wiring information for accessories you use regularly. If you run more than one set, label things properly. It sounds basic, but it saves confusion later, especially when you are swapping mics, leads or speakers between radios. At CB Radio UK, practical reference material matters because customers are not just buying boxes – they are fitting equipment, replacing parts and keeping existing setups on the air. That is exactly where accurate manuals and diagrams prove their worth. If you are stuck between two possible diagrams, or the radio in front of you does not match what the paperwork says, do not force it. Pause, check the model details again, and verify the connector view before any wire is moved. A few extra minutes there usually beats paying for a repair that never needed to happen. The right diagram will not do the job for you, but it will stop you starting on the wrong foot. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Manuals%20and%20Wiring%20Diagrams%20Explained&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-manuals-and-wiring-diagrams-explained%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-manuals-and-wiring-diagrams-explained/?share=telegram) - **Categories:** Uncategorised --- ### [Homebase CB Setup Guide for Clear UK Signals](https://cbradio.co.uk/homebase-cb-setup-guide/) **Published:** June 27, 2026 **Author:** **Excerpt:** Homebase CB setup guide for UK users - learn the right radio, aerial, power supply and tuning steps for a clear, reliable base station. **Content:** A home CB station usually goes wrong in the same two places – the aerial is treated as an afterthought, or the radio is expected to fix a poor installation. A proper homebase CB setup guide starts with the simple truth that your signal is only ever as good as the whole system. Get the basics right and even a modest station can perform well. Get them wrong and an expensive rig will still sound weak, noisy or both. For UK users, a home CB setup is not just a case of putting a radio on a shelf and clipping on any old antenna. You need to think about where the set will live, how it will be powered, what sort of aerial suits the property, and how you will tune it safely. That applies whether you want a straightforward legal FM base station for local chat, or you are building something a bit more serious with better receive performance and stronger audio. ## What you need before you start The core of any base station is simple enough. You need a CB radio, a suitable power supply, an aerial, coaxial cable, mounting hardware and an SWR meter if the radio or aerial does not already make tuning easy. Add a decent external speaker if the room is noisy, and a better microphone if you want cleaner audio. The point worth stressing is compatibility. A [12V CB radio](https://cbradio.co.uk/product/moonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v/) used at home needs a regulated power supply with enough current for the set you are running. Most standard CB radios are not especially demanding, but buying too close to the limit is asking for voltage drop, unwanted noise or erratic behaviour on transmit. A little headroom is sensible. Then there is the aerial. For a homebase station, this matters more than almost anything else. Short loaded antennas can work where space is tight, but if you have room for a proper base aerial, you will usually see the benefit straight away. Height and clear placement nearly always beat fancy claims on a box. ## Choosing the right radio for a homebase CB setup guide A lot depends on how you actually plan to use the station. If you want a simple legal UK setup for local use, a straightforward FM CB radio is often all you need. If you are an experienced operator and want more flexibility, you may be looking at multimode equipment and a more advanced installation. For beginners, ease of use matters. Clear channel display, sensible controls, a good microphone and solid reliability are worth more than a long list of features you may never touch. For regular users, extras like adjustable squelch behaviour, better filtering and stronger speaker audio can make day-to-day operation far more pleasant. The physical layout matters as well. A home station should be comfortable to use for long periods. If the radio has a tiny speaker or awkward front panel, that becomes irritating quickly. It is one of the reasons many base users add an extension speaker and keep the radio at a sensible working height rather than tucked away behind other gear. ## Power supply choices that do not cause problems This is one area where cutting corners usually shows up fast. A poor power supply can introduce electrical noise, unstable voltage and unreliable transmit performance. For most home installations, a regulated 13.8V supply is the standard choice. If you are running a normal CB set, size the supply with some spare capacity rather than buying the absolute minimum. It keeps things running cooler and gives a bit of room if you later add accessories. Cooling fan noise can also matter if the radio is in a quiet room, so there is a balance between output, build quality and day-to-day comfort. Keep the wiring tidy and use the correct fuse arrangement. It is not glamorous, but it makes fault-finding much easier later. Loose DC connections and untidy cable runs are behind more intermittent homebase faults than most people realise. ## The aerial is the real heart of the station If there is one section to take seriously in any homebase CB setup guide, this is it. The aerial and where you mount it will make or break the station. A good radio with a poor antenna system will underperform every time. In simple terms, higher is usually better, as long as the installation is safe and secure. Roof mounting often gives the best results, but it is not always practical. Some users are limited to chimney mounts, wall brackets or garden mast setups. Each can work well if the aerial has enough clearance and the mount is sturdy enough for wind loading. You also need to be realistic about your property. If you live in a built-up area with limited space, a shorter or more discreet antenna may be the only sensible option. That does not mean the station will be useless, only that expectations should match the installation. A compromise aerial can still provide solid local coverage if it is tuned properly. Coax choice matters too, especially as the cable run gets longer. Cheap, thin coax may be tempting, but signal loss and durability become more of a concern over distance. A [decent quality coax](https://cbradio.co.uk/product/rg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors/) run with proper connectors is money better spent than many cosmetic upgrades. ## Mounting and routing without creating noise Where the station lives inside the house affects usability more than people expect. Keep the radio somewhere dry, ventilated and easy to reach. Avoid balancing power supplies and radios in cramped cupboards where heat can build up. Base stations often spend longer switched on than mobile sets, so airflow matters. Route coax and power cables neatly and keep them away from obvious sources of electrical interference where possible. LED lighting, routers, televisions, cheap plug-in chargers and solar inverter equipment can all add background noise. Sometimes the fix is as simple as moving the radio position or rerouting a cable. Sometimes it takes a bit more detective work. If your receive is suddenly full of hash indoors but sounds cleaner on a separate test supply or with household items switched off, the problem may not be the radio at all. That is why methodical setup beats guesswork. ## Tuning the aerial properly Aerial tuning is not optional. It is the step that protects the radio and helps the whole station work as it should. The aim is to get the SWR as low and as even as possible across the channels you use most. Take readings carefully, following the meter instructions and checking on low, mid and high channels. If the [SWR is high](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/) across the band, there may be a cable, connector or grounding issue depending on the antenna type. If the reading changes from one end of the band to the other, the antenna length usually needs adjustment. Make small changes, then test again. Rushing this part is how people end up chasing the wrong fault. If you are tuning a roof or mast installation, do it safely and avoid working in poor weather. No radio contact is worth a bad fall. ## Common mistakes in a homebase CB setup guide The usual problems are very consistent. People buy a good radio and pair it with a weak aerial. They use bargain coax on a long run. They put the antenna too low, too close to metalwork or too close to surrounding buildings. Or they ignore interference until they assume the radio itself is faulty. Another common mistake is overcomplicating the first station. If you are new to home CB, start with a straightforward legal setup that is easy to understand and easy to troubleshoot. Once you know how the station behaves, upgrades make more sense. There is also the question of expectations. Homebase CB performance depends on terrain, local noise levels, property restrictions and antenna height. Two users with the same radio can get very different results. That is normal. The best setup is the one that works reliably in your location, not the one with the most impressive spec sheet. ## When to upgrade and when to leave it alone Once the station is working, the next step is not always buying more gear. If your signal reports are good, the receive is clean and the SWR is under control, you may already have what you need. Chasing tiny improvements can become expensive quickly. That said, there are sensible upgrades. A better base antenna often gives more real-world improvement than changing radios. An extension speaker can transform receive clarity. Better coax can help if the original run was poor. A quality microphone may improve transmitted audio, but only if the radio is already set up properly. If you are unsure what to change first, start with the parts of the system that affect performance most directly. In practice, that usually means the antenna system before anything else. It is the approach many experienced users settle on after wasting money doing it the other way round. For anyone building their first station or replacing an old one, specialist advice is worth having. CB Radio UK has long catered for users who want the right kit rather than random parts that happen to fit. That matters more with base installations, where one poor choice can hold back the entire setup. A good home station does not need to be flashy. It needs to be stable, well-matched and honest about the space you have available. Build it carefully, tune it properly, and you will spend far more time enjoying the radio than fiddling with faults. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/homebase-cb-setup-guide/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/homebase-cb-setup-guide/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/homebase-cb-setup-guide/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/homebase-cb-setup-guide/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Homebase%20CB%20Setup%20Guide%20for%20Clear%20UK%20Signals&body=https%3A%2F%2Fcbradio.co.uk%2Fhomebase-cb-setup-guide%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/homebase-cb-setup-guide/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/homebase-cb-setup-guide/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/homebase-cb-setup-guide/?share=telegram) - **Categories:** Uncategorised --- ### [10 Best CB Radio Accessories to Buy](https://cbradio.co.uk/best-cb-radio-accessories/) **Published:** June 25, 2026 **Author:** **Excerpt:** Find the best CB radio accessories for UK mobile and homebase setups, from antennas and mics to speakers, mounts and power supplies. **Content:** A decent CB set can feel underwhelming or spot on depending on what you bolt onto it. That is why choosing the best CB radio accessories matters just as much as choosing the radio itself, especially if your setup lives in a 4×4, work van, lorry or home shack where signal quality and ease of use count every day. Some accessories improve range. Some make a noisy cab easier to work in. Others simply stop a tidy install turning into a rattly mess after a week on green lanes or rough roads. The trick is not buying everything at once. It is choosing the pieces that solve the weak points in your own setup. ## What makes the best CB radio accessories? The best accessories are not always the most expensive ones. They are the ones that match your radio, vehicle, mounting position and how you actually use CB. A motorway driver who spends long hours in a noisy cab will rate an extension speaker far more highly than a casual weekend user. An off-road driver may get more value from a stronger mount, spring and protected cable routing than from chasing every last bit of transmit performance. Compatibility comes first. There is no point buying a microphone with the wrong wiring, a power supply that is not up to the job, or an antenna mount that looks tidy but gives a poor ground plane. Build quality matters too, because cheap fittings and weak cable can create faults that are awkward to trace later. ## Best CB radio accessories worth buying first If you are building a practical kit, these are the accessories that usually make the biggest difference. ### 1. A properly matched antenna If there is one place not to cut corners, it is the antenna. A good radio with a poor antenna setup will still perform badly, while a modest radio with a well-chosen antenna often surprises people. For mobile use, your choice depends on height limits, where you mount it, and how much abuse it is likely to take. Roof-mounted antennas often perform well because they sit high and central, but that is not always practical on a 4×4 with roof bars, garages or low branches to think about. Gutter, mirror and body mounts all have their place, but placement affects performance. Longer antennas generally work better, though they are less convenient. That is the trade-off. ### 2. SWR meter and patch lead Antenna tuning is not glamorous, but it is one of the most useful jobs you can do. An [SWR meter](https://cbradio.co.uk/what-is-swr-on-cb/) tells you whether the antenna system is set up properly. Without it, you are guessing. A badly tuned setup can reduce performance and put unnecessary strain on the radio. For a beginner, this accessory often saves more frustration than any upgrade microphone or speaker. Even if you only use it a handful of times, it earns its keep quickly. ### 3. External speaker Many mobile CB radios have small built-in speakers, and in a noisy vehicle that can be a real limitation. Road noise, diesel engines, mud tyres and general cab noise can make weak audio tiring to listen to. A decent extension speaker gives clearer receive audio and lets you place the sound where you can actually hear it. That is particularly useful in 4x4s and commercial vehicles where the radio itself may be tucked away under the dash or overhead. ### 4. Upgraded microphone Not every user needs an upgraded mic, but plenty do. If your standard hand mic sounds thin, feels flimsy or is awkward to use with gloves, changing it can make the radio far nicer day to day. Some users want stronger audio and a more solid feel. Others simply need a replacement that matches the radio correctly and stands up to regular use. Just make sure wiring is right for your set. This is one of those areas where buying the wrong accessory is very easy if you guess. ### 5. Quality mount and bracket A poor mount causes endless annoyance. It can loosen, rattle, rust, shift position or fail when you hit rough ground. A proper bracket or antenna mount is not the most exciting purchase, but it affects reliability every time you use the radio. For off-road vehicles, strength matters. Springs can also be worthwhile where the antenna is likely to catch branches or take knocks. On a road-only vehicle, neatness and corrosion resistance may matter more. ### 6. Power supply for homebase use If you are running a CB at home, a suitable [power supply](https://cbradio.co.uk/cb-power-supply-for-homebase/) is essential unless the radio has its own integrated arrangement. The right supply needs to provide stable output and enough current for the radio and any connected accessories. Go too small and you may see poor performance or unwanted noise issues. Go wildly oversized and you may spend more than necessary. For homebase users, this is one of the best CB radio accessories because it forms the foundation of the whole station. ### 7. Coax and connectors Good coaxial cable and properly fitted connectors are easy to overlook because they are not visible once installed. Even so, they matter. Signal loss, water ingress and intermittent faults often start here. For a mobile install, routing also matters. Avoid sharp bends, pinch points and areas where doors or tailgates can damage the cable over time. If your setup has strange receive or transmit problems, connectors are one of the first places worth checking. ### 8. Inline fuse and power lead accessories A safe, tidy power connection is part of a dependable install. Fused leads help protect both the radio and the vehicle circuit. If you use the radio regularly, especially in a working vehicle, this is not an area for makeshift wiring. Noise suppression can also be relevant depending on the vehicle. Some setups are electrically noisier than others, particularly modern vehicles with plenty of electronics. If alternator whine or interference appears, the fix may be in the power side rather than the radio. ### 9. A PA horn or speaker, if you actually need it Some radios support PA use, and for certain users that is handy. Event marshalling, site use and specific work environments may justify it. For most casual users, it is optional rather than essential. That is a good example of how accessories should match the job. A PA speaker is useful in the right setting, but pointless clutter in the wrong one. ### 10. Storage, protection and small fitting parts The little bits often save the day. Spare fuses, mic hangers, cable ties, grommets, reducers, adaptors and weather protection parts rarely get much attention, yet they can be the difference between a clean install and an irritating one. If you are fitting out a vehicle for regular use, it pays to think beyond the headline items. ## Choosing the best CB radio accessories for your type of setup ### Mobile road use For [road cars, vans and lorries](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/), start with antenna performance, clear audio and a tidy mount. You want an antenna suited to the vehicle and a speaker you can hear over normal road noise. Ease of use matters more than chasing a complicated setup. ### 4×4 and off-road use Off-road setups need to cope with vibration, water, mud and impacts. A stronger antenna mount, spring, durable microphone and protected cable run usually make more sense than fragile high-performance parts. Practical reliability wins here. ### Homebase use At home, put your money into the antenna system, feedline and power supply first. A homebase station can perform very well with the right basics in place, but poor cabling or a weak supply will hold it back. Desk layout and speaker position also matter if you spend long periods listening. ## Common mistakes when buying CB accessories The biggest mistake is buying by appearance alone. Shiny microphones, oversized antennas and bargain fittings can all disappoint if they are wrong for the radio or mounting position. The second is ignoring installation details. A good accessory fitted badly can perform worse than an average one fitted properly. Water getting into connectors, poor earthing, loose mounts and untuned antennas are common causes of poor results. The third is buying too much too soon. It is better to sort the essentials, use the setup, then improve what actually needs improving. Most users benefit more from a better antenna and speaker than from collecting gadgets they rarely use. ## Best CB radio accessories for beginners If you are new to CB, keep it simple. Start with a decent antenna, an SWR meter or access to proper tuning, a solid mount and an extension speaker if the vehicle is noisy. That gives you a setup that works properly without wasting money. Once you have spent time on air, you will have a clearer view of whether you need an upgraded mic, a different antenna style, or extra bits for a neater install. That is usually the smarter route than trying to build the perfect station on day one. At CB Radio UK, this is exactly where specialist advice helps. The right accessory is the one that suits your radio, your vehicle and the way you use it – not just the one with the biggest claims. A well-chosen CB setup does not need to be flashy. It needs to be reliable when the weather turns, when the lane gets rough, or when you simply need to hear and be heard without any fuss. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-radio-accessories/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-radio-accessories/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-radio-accessories/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-radio-accessories/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2010%20Best%20CB%20Radio%20Accessories%20to%20Buy&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-radio-accessories%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-radio-accessories/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-radio-accessories/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-radio-accessories/?share=telegram) - **Categories:** Uncategorised --- ### [Do I Need an SWR Meter for CB Radio?](https://cbradio.co.uk/do-i-need-an-swr-meter-for-cb-radio/) **Published:** June 23, 2026 **Author:** **Excerpt:** Do I need an SWR meter for CB radio? Learn when it matters, when it doesn't, and how proper tuning protects your radio and improves performance. **Content:** Fit a new aerial, key up for the first time, and the question usually comes straight after: do I need an SWR meter? If you are running CB in a 4×4, car, van or homebase setup, the short answer is often yes. Not always, but often enough that it is worth understanding properly before you start transmitting. An SWR meter is one of those bits of kit that beginners sometimes see as optional and experienced users see as basic. That is not because it is complicated or because everyone enjoys extra gear in the install. It is because a badly matched aerial system can make even a good radio perform poorly, and in some cases it can put unnecessary strain on the set. ## What an SWR meter actually does SWR stands for Standing Wave Ratio. In plain terms, it tells you how well your radio and aerial system are matched. When you transmit, power should leave the radio, travel up the coax, and radiate from the aerial. If the system is not matched properly, some of that power is reflected back towards the radio instead of being sent out efficiently. The SWR meter shows how much of that mismatch is happening. Lower readings are better. A perfect 1:1 match is the ideal, but in the real world you are usually aiming for something low and sensible rather than chasing perfection. For most CB users, a reading around 1.5:1 is very good, and anything under 2:1 is generally acceptable. Once it starts climbing beyond that, you need to pay attention. ## Do I need an SWR meter if I bought a complete kit? Sometimes people assume a starter kit means everything is already matched and ready to go. That would be convenient, but the final tuning depends on the vehicle, mounting position, earth, coax routing, and the aerial itself. Even two identical antennas can behave differently on two different vehicles. A roof-mounted aerial on a metal-bodied vehicle usually behaves differently from a wing mount, a mirror mount, or a bracket on a Defender with lots of accessories around it. If you are fitting an aerial to a 4×4 with a roof rack, spotlights, light bar, snorkel or rear ladder, all of that can influence performance. The kit may be right, but the install still needs checking. So if your question is do I need an SWR meter for a new CB kit, the honest answer is yes in most cases, unless the aerial has already been professionally tuned on that exact vehicle and setup. ## When you probably do need one If you are installing a new aerial, changing the mount, replacing coax, moving the antenna to a different part of the vehicle, or swapping radios, an SWR check is good practice. It is especially important with mobile CB setups where installation variables are everywhere. It also matters if you are using a longer whip, a spring, a body mount, or anything mounted away from the centre of the vehicle. Off-road users often prioritise practicality and durability, which makes sense, but the more compromise in the mounting position, the more useful SWR testing becomes. For homebase users, it is just as relevant. A base antenna still needs to be matched properly, and surrounding buildings, guttering, poles and mounting height can all affect results. ## When you might not need to buy one There is a difference between needing an SWR check and needing to own an SWR meter. If you only fit one radio once, and somebody experienced is setting it up for you, you may not need to buy a meter for yourself. You still need the aerial checked. You just may not be the one doing it. Some modern antennas are marketed as pre-tuned or factory tuned. That can help, but it should not be taken as a guarantee that the final SWR on your vehicle will be correct. Factory tuning gets the aerial into the ballpark. Vehicle installation decides the rest. If your radio has a built-in SWR function, that can also reduce the need for a [separate meter](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/). Even then, many users still prefer an external meter because it gives a clearer picture and is handy when checking multiple radios or fault-finding coax and antenna issues. ## What happens if you skip it? Sometimes, not much. Plenty of people install a CB, use it casually, and never notice a serious problem. But that does not mean the setup is working as well as it could. The obvious issue is reduced transmit performance. You may think your radio is weak when the real problem is that the antenna is not tuned properly. Range can suffer, audio reports may be poorer, and your setup may feel inconsistent. The bigger concern is reflected power going back into the radio. Many modern sets have some protection built in, but that is not a reason to ignore SWR. Protection circuits help prevent damage, but they do not magically turn a bad install into a good one. Running high SWR for long periods is still asking for trouble. ## Common causes of high SWR High SWR does not always mean the aerial itself is faulty. In fact, the problem is often elsewhere in the install. Poor grounding is one of the big ones, especially on vehicles with powder-coated brackets, painted panels, or mounts that do not make a proper electrical connection. Coax issues are another regular cause. [A damaged cable](https://cbradio.co.uk/product/rg58-15m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-scanner/), poor PL-259 connection, trapped coax, or water ingress can all affect readings. Mounting position matters too. If the aerial is tucked too close to bodywork, roof accessories or other metalwork, it may not tune correctly. Then there is the simple issue of aerial length. Many CB antennas are adjusted by shortening or lengthening the whip. Small changes can make a noticeable difference, which is why tuning should be done carefully rather than by guesswork. ## How difficult is it to use an SWR meter? For most CB users, it is straightforward. The meter goes between the radio and the aerial feed, you select the correct channel to test, calibrate the meter if required, and take readings. Then you adjust the aerial in small steps until the readings improve. The process is not difficult, but it does need patience. You do not want to start hacking large chunks off a whip or making random adjustments. Measure, adjust, and measure again. That is the sensible way to do it. If you are new to CB, this is one of those jobs where having a specialist retailer in your corner helps. A proper CB shop can usually point you in the right direction quickly, especially if you are dealing with a specific mount, antenna type or vehicle layout. ## Do I need an SWR meter for every antenna type? The need is strongest with traditional adjustable CB mobile antennas, but the principle applies across the board. Whether you are using a magnetic mount, body mount, mirror mount or base station antenna, you are still trying to achieve a good match. Mag mounts are often treated as plug-and-play, but they still benefit from an SWR check. They are easy to move, and that is part of the problem. A [mag mount](https://cbradio.co.uk/product/compact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w/) in the middle of the roof may tune very differently from one stuck on a rear corner. Fibreglass and fixed-style antennas can also mislead people into thinking there is nothing to adjust. Even if the antenna itself has limited adjustment, the overall system can still be checked for problems. ## The practical answer for most UK CB users If you use your CB casually but want it working properly, an SWR meter is not overkill. It is a sensible bit of kit. For mobile users, especially in 4x4s and working vehicles, it is one of the simplest ways to avoid poor performance and unnecessary stress on the radio. If you are only ever going to fit one basic setup and have a knowledgeable person tune it for you, you may not need to own one personally. But if you like changing gear, moving antennas between vehicles, experimenting with mounts, or sorting your own installs, you will almost certainly get use out of it. At CB Radio UK, this is one of the most common questions we hear, and for good reason. People want to know whether they are buying another gadget they do not need. Fair question. In most real-world CB installs, an SWR meter earns its place pretty quickly. The best way to look at it is this: a radio and aerial are a system, not two separate purchases. If you want that system to work properly, checking SWR is part of the job. A few minutes with the right meter can save a lot of poor performance, head-scratching and avoidable wear later on. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/do-i-need-an-swr-meter-for-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/do-i-need-an-swr-meter-for-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/do-i-need-an-swr-meter-for-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/do-i-need-an-swr-meter-for-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Do%20I%20Need%20an%20SWR%20Meter%20for%20CB%20Radio%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fdo-i-need-an-swr-meter-for-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/do-i-need-an-swr-meter-for-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/do-i-need-an-swr-meter-for-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/do-i-need-an-swr-meter-for-cb-radio/?share=telegram) - **Categories:** Uncategorised --- ### [CB Aerial Types Explained Clearly](https://cbradio.co.uk/cb-aerial-types-explained/) **Published:** June 21, 2026 **Author:** **Excerpt:** CB aerial types explained for UK drivers and radio users. Learn the differences, mounting options, tuning needs and what suits your setup best. **Content:** A CB that sounds weak, noisy or short on range is often blamed on the radio. In practice, the aerial is usually where the real gains are made. If you have been comparing whips, coils, mounts and base antennas and wondering what actually matters, this guide on CB aerial types explained is aimed at making the choice simpler. The right aerial depends on how you use your set. A green laner with a roof rack, a lorry driver covering long distances, and a home user with a fixed station do not need the same thing. Length, mounting position, build quality and tuning all affect performance, and there is always a trade-off between convenience and signal. ## CB aerial types explained for real-world use At the simplest level, CB aerials fall into two camps: mobile aerials for vehicles and base station aerials for fixed locations. Within those, the differences come down to size, construction and mounting method. For vehicle use, the most common options are roof-mounted whips, [mag mount aerials](https://cbradio.co.uk/product/super-strong-so239-magnetic-mag-mount-for-cb-aerial-ham-antenna-so-239-fitting/), gutter or mirror mounts, and heavy-duty sprung whips for 4×4 and off-road work. Some are designed for maximum performance, others for easy fitting, and some are built mainly to survive branches, vibration and rough tracks. For homebase use, you are looking at full-size vertical antennas or compact base aerials. These are intended to be mounted as high and as clear as possible. They work very differently from a mobile aerial bolted to a vehicle body, so it helps to think about them separately. ### Full-length whip aerials If outright mobile performance is the goal, a longer whip usually wins. A full-length CB whip is closer to the ideal electrical length for 27MHz, which means it tends to radiate more efficiently than a very short loaded antenna. In plain terms, longer aerials often hear better and transmit better. The downside is obvious. A long whip can be awkward in car parks, under barriers and on wooded lanes. It also needs a solid mount because wind load and flex put more strain on brackets and body panels. For many road users, the best-performing option is not always the most practical one. ### Loaded aerials A loaded aerial uses a coil to shorten the physical length while keeping the aerial electrically suitable for CB frequencies. This is why you can buy relatively compact mobile aerials that still work well enough for day-to-day use. Where the loading coil sits matters. Base-loaded designs tend to be tougher and often suit rough use. Centre-loaded aerials can offer a useful balance. Top-loaded designs can be efficient for their size, but may be less convenient in some installs. None of these is automatically best in every case. It depends on where it is fitted and what you expect from it. Short loaded aerials are popular because they are easier to live with. They clear more obstacles, look neater on modern vehicles and are less likely to get in the way. The compromise is that very short aerials generally give away some performance compared with a properly installed longer whip. ### Heavy-duty off-road aerials For 4×4 use, durability is often just as important as range. Off-road aerials are built to cope with knocks, flexing and constant movement. You will often see spring bases, thicker whips and sturdier mounts on these setups. They are a sensible choice if your vehicle regularly sees trees, mud, ruts and body movement. A delicate high-performance whip might work brilliantly on the road, but it is not always the right answer on a pay-and-play site or a wooded trail. Aerial choice for off-road work is always a balancing act between resilience and signal performance. ### Mag mount aerials Mag mount aerials remain popular because they are easy to fit and remove. For many users, especially beginners, they are a straightforward way to get on air without drilling holes or fabricating brackets. They work best when placed on a large metal area, ideally central on the roof. That gives the aerial a better ground plane and usually improves all-round performance. Stick the same mag mount on an awkward edge position and results can drop off noticeably. The convenience is excellent, but there are limits. Mag mounts can shift, cables can get trapped, and they are not the first choice for serious off-road driving. They are ideal for many road vehicles, but not every installation. ## Choosing a mount is part of choosing the aerial When people compare aerials, they sometimes ignore the mount. That is a mistake, because the mount changes how the aerial performs. A body-mounted aerial with a good earth on the vehicle roof will usually outperform the same aerial fitted in a poorer location. Roof centre mounting is often the benchmark for mobile use because it gives a more even radiation pattern. Wing, gutter, mirror and rear body mounts can still work well, but they are usually more of a compromise. On a 4×4, the available mounting points often decide the type of aerial you can realistically use. Roof racks, spare wheel carriers, bonnet mounts and [rear door brackets](https://cbradio.co.uk/product/psm1-rear-cb-aerial-mount-3-8-stud-5m-cable-land-rover-defender-90-4x4/) all have their own pros and cons. A rear-mounted whip may be protected from low branches in one situation and badly shadowed by the vehicle body in another. ### Ground plane and no-ground-plane setups Most standard mobile CB aerials expect to work against a metal vehicle body acting as a ground plane. That is one reason they behave better on steel roofs than on fibreglass panels or awkward mounts with poor bonding. If your vehicle has limited metal bodywork, such as certain motorhomes or specialist builds, a no-ground-plane system may be worth considering. These are designed for situations where a normal earth return is not available in the usual way. They can solve real installation problems, but they need to be matched correctly. They are not a magic upgrade over a proper conventional setup. ## CB aerial types explained by where you use them If you spend most of your time on motorways or A-roads, a longer road-biased aerial on a strong roof or mirror mount often makes sense. You can usually afford a bit more height, and the extra performance is useful over distance. If your vehicle is a daily driver that also carries a CB for convoy work or occasional trips, a mid-length loaded aerial is often the sensible middle ground. You get decent performance without turning the vehicle into a branch magnet. If you are building a dedicated off-road setup, toughness moves much higher up the list. Aerials with springs and flexible whips can save a lot of frustration. There is little point fitting something with excellent lab numbers if it snaps the first time it meets a low oak branch. For a homebase station, think bigger and higher if possible. Base antennas benefit from clear siting, [proper support](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount/) and careful cable routing. A fixed station aerial generally has fewer compromises than a mobile one, but only if it is installed properly and safely. ## Tuning matters more than many people think Even the right aerial can perform poorly if it is not tuned. SWR, or standing wave ratio, is the basic check that tells you how well the aerial system is matched to the radio. A high SWR can reduce performance and, in some cases, risk damage to equipment. Many aerials need trimming or adjusting after fitting. That is normal. The best results come from checking the full installation, including mount earth, coax routing and connector quality, not just snipping the whip and hoping for the best. This is also where cheap installations often fall short. A decent aerial on a poor mount with weak earthing and untidy coax can easily underperform compared with a modest aerial installed properly. The whole system matters. ## What should you buy? If you want the short version, buy the longest practical aerial you can live with, fit it in the best possible position, and tune it correctly. That approach works more often than not. But practical really does matter. A road car with height restrictions may be better off with a compact loaded aerial. A working 4×4 may need a sprung whip that survives abuse. A base user should be looking at a proper fixed antenna rather than trying to make a mobile aerial do a base station job. At CB Radio UK, this is usually where a quick conversation saves time. The right answer comes from the vehicle, the mount position, the sort of driving you do, and whether you care more about absolute range or day-to-day durability. Aerial choice is not about buying the biggest thing on the shelf. It is about fitting the right tool to the job, then giving it every chance to work properly. Get that right and your CB will sound like a different set altogether. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-aerial-types-explained/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-aerial-types-explained/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-aerial-types-explained/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-aerial-types-explained/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Aerial%20Types%20Explained%20Clearly&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-aerial-types-explained%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-aerial-types-explained/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-aerial-types-explained/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-aerial-types-explained/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio Legal Guide UK](https://cbradio.co.uk/cb-radio-legal-guide-uk/) **Published:** June 19, 2026 **Author:** **Excerpt:** CB radio legal guide UK: learn legal channels, power limits, licence rules, vehicle use and where UK users can get caught out on air. **Content:** Buy the wrong set, use the wrong mode, or bolt on the wrong amplifier, and a simple CB setup can become a legal headache. This CB radio legal guide UK is here to keep things straightforward for drivers, 4×4 users, hobbyists and anyone fitting a radio in a vehicle or at home who wants to stay on the right side of the rules. ## What CB radio is legal in the UK? For most users, legal UK CB comes down to using approved equipment on the permitted CB bands, within the allowed power limits, and without modifying the radio to operate outside what is authorised. That is the practical version. The reason people get confused is that plenty of radios sold for enthusiasts are capable of more than one standard. You will see UK FM, CEPT channels, AM, SSB and export-style functions mentioned in product descriptions or on forums. Some of those features are lawful to use in the UK, and some depend entirely on the radio, the mode and how it is configured. If you just want a simple legal setup for everyday use, the safest route is a modern UK-compliant CB radio from a specialist supplier, paired with a properly matched aerial and sensible installation. That suits most road users, green laners and farm or site users who need reliable short-range comms rather than a science project. ## Do you need a licence for CB radio in the UK? No. You do not need an individual licence to use legal CB radio in the UK. That is one of the big reasons CB remains popular. It is accessible, practical and easy to get on air with. If the radio itself is compliant and you are using it within the permitted rules, there is no separate licence application for normal CB use. That does not mean anything goes. Licence-free is not the same as rule-free. The equipment still needs to meet the UK requirements, and the way you use it still matters. ## CB radio legal guide UK: channels and modes Most UK users will come across two main legal CB channel sets. There are the UK 27/81 channels, often called the UK channels, and there are the CEPT channels, sometimes referred to as the European channels. Many modern radios cover both, which is useful if you want flexibility. The key point is that legality is tied to authorised CB frequencies and permitted operating modes. FM is standard and widely used. Some radios also support AM or SSB, but whether those modes are lawful depends on the current UK rules and on the equipment being intended and approved for that use. This is where buying from a specialist matters. A radio can physically tune a band or offer a mode that is not appropriate for legal UK CB operation. That does not automatically make the unit itself a problem in every case, but using it outside the permitted CB allocation certainly can be. If you are unsure, keep it simple. Ask whether the set is intended for legal UK CB use straight out of the box, which channels it covers, and which modes are approved for normal operation in the UK. ## Power limits matter more than many buyers think One of the most common legal mistakes is assuming more power automatically means better communication and that nobody will care. In practice, power limits are a core part of legal CB operation. Legal CB radios operate within specified output limits. Once users start adding non-compliant amplifiers, altering output stages or chasing power figures well beyond the allowed level, they move away from legal CB use. That is true whether the setup is in a Land Rover, a lorry, a farm pickup or a homebase shack. There is also a practical trade-off. A well-installed legal radio with a properly tuned aerial will usually outperform a poor installation with extra power thrown at it. Good earthing, correct SWR setup, [decent coax](https://cbradio.co.uk/product/mini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259/) and the right antenna position often matter more than people expect. ## Are linear amplifiers legal on CB in the UK? For ordinary legal CB operation, adding a linear amplifier is the point where users often step into trouble. Many experienced radio hobbyists know what a linear does and why people fit one, but for straightforward legal CB use in the UK, amplifiers are not the safe, standard option some buyers assume. If your aim is to keep your setup clearly within legal CB rules, the sensible answer is to avoid using a linear amplifier on CB. This is especially relevant for mobile users. Off-road and convoy communications are usually better served by a tidy installation, a quality antenna and realistic expectations about range. More power is not a substitute for a proper setup, and it can create interference issues as well as legal ones. ## Can you use a CB radio while driving? This is where radio law and driving law overlap. CB radio itself is not banned in vehicles, and mobile use is a major part of CB culture in the UK. Plenty of drivers use CB legally on the road every day. The issue is whether you are driving safely and remaining in proper control of the vehicle. If using the microphone distracts you, causes poor control, or leads to careless driving, that is where you can run into problems. The exact circumstances matter. A quick transmission in slow convoy traffic is one thing. Fumbling with controls, changing channels while moving, or letting the radio take your attention away from the road is another. Hands-free expectations around mobile phones have made some motorists assume all radio use is treated identically, but the practical legal risk with CB is usually about driver control and safety. If you use a mobile CB, mount it properly, keep the mic where it is easy to reach, and do your setup adjustments before moving off. ## Aerials, installation and staying compliant A legal radio can still become part of a poor setup if the installation is badly done. There is no single law that says one antenna mount is right and another is wrong for every vehicle, but installation affects both performance and safety. A badly mounted whip that comes loose on the road is not just inconvenient. Incorrect wiring can also create electrical issues, noise problems or damage to the set. For 4×4 and commercial users, aerial choice is often about compromise. A tall whip may perform better, but a shorter, [tougher antenna](https://cbradio.co.uk/best-cb-antennas-for-4x4/) may suit wooded lanes, height barriers or regular site use. Magnet mounts are convenient, but fixed mounts can offer better long-term reliability. None of that changes legality by itself, but poor matching and poor mounting can tempt users into chasing performance in the wrong ways. If the radio seems weak, do not assume you need illegal power. Check the antenna, cable run, earthing and [SWR](https://cbradio.co.uk/cb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired/) first. ## Where UK users get caught out The usual problems are not mysterious. They are nearly always one of the following: buying an export radio without understanding how it should be used, modifying a legal set for extra power, using an amplifier, transmitting outside authorised CB frequencies, or treating online advice as if it were official guidance. Second-hand gear is another area where caution helps. Older equipment can still be useful, but not every old set is suitable for legal plug-and-play use today. Some radios have been modified by previous owners, and not always neatly. If a used set has had a hard life, missing seals, odd channel coverage or unexplained switches should make you ask questions. That is one reason many buyers prefer a specialist retailer rather than gambling on unknown equipment from a boot sale or marketplace listing. ## What to check before you buy If you are buying your first setup, or replacing an older one, focus on a few practical checks. Confirm that the radio is suitable for legal UK CB use, check which channels and modes it supports, and make sure the power supply and mounting arrangement fit your vehicle or homebase properly. It also helps to think about how you will actually use it. A green laner in a convoy, a motorway driver, and a home user chatting locally may all want different things from the same legal framework. There is no point buying a feature-heavy set if what you really need is a straightforward, dependable unit with clear audio and simple controls. If you are unsure, ask before you fit. That saves far more time and money than correcting a mismatched install later. ## A sensible rule of thumb If a radio is sold and configured as a proper UK CB set, used on the correct channels, within the permitted power limits, and without amplifier-driven shortcuts, you are generally in the right territory. If the appeal of a setup is that it bends the rules, stretches the frequencies or chases power for the sake of it, that is usually your warning sign. For most users, legal CB in the UK is not difficult. The best approach is also the least glamorous one – choose the right radio, install it properly, tune the aerial, and use it with a bit of common sense. If you need help matching the right gear to your vehicle or intended use, that is exactly where a specialist such as CB Radio UK earns its keep. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-legal-guide-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-legal-guide-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-legal-guide-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-legal-guide-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Legal%20Guide%20UK&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-legal-guide-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-legal-guide-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-legal-guide-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-legal-guide-uk/?share=telegram) - **Categories:** Uncategorised --- ### [Why Is My SWR High on a CB Aerial?](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/) **Published:** June 17, 2026 **Author:** **Excerpt:** Why is my SWR high? Learn the most common CB aerial causes, how to test properly, and what to adjust for a safer, stronger setup. **Content:** You’ve fitted the radio, mounted the aerial, checked the coax, keyed up for a test and the meter is still telling you something’s wrong. If you’re asking why is my SWR high, the answer is usually not the radio itself. In most cases, high SWR comes down to the aerial system – the mount, the earth, the coax, the location, or how the aerial has been tuned. That matters because SWR is not just a number to glance at and ignore. A high reading means power is being reflected back instead of radiating efficiently, which can reduce performance and, if it is bad enough, put unnecessary strain on the set. For mobile users, especially on 4x4s, pick-ups and working vehicles, the cause is often something simple but easy to miss. ## Why is my SWR high in the first place? SWR stands for Standing Wave Ratio. In plain terms, it tells you how well your aerial system is matched to the radio. A low SWR means the signal is transferring properly. A high SWR means there is a mismatch somewhere between the radio and the aerial. On a CB installation, that mismatch can happen for several reasons. The aerial may be too long or too short. The mount may not be earthing correctly. The coax may be damaged, trapped or [poorly terminated](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/). The aerial may be mounted in a poor location on the vehicle. Sometimes the problem is simply that the SWR has been checked incorrectly. The useful thing to remember is that SWR faults are usually mechanical or installation-related. They are less often a sign that you need a new radio. ## Start with how you are testing it Before chasing faults, make sure the reading is real. An SWR meter must be connected the right way round, with the transmitter side going to the radio and the aerial side going to the antenna lead. The meter must also be calibrated properly if it is a manual type. Test the SWR outdoors, away from buildings if possible. Don’t do it in a garage, next to metal cladding or under a low roof and expect a reliable result. Nearby metalwork can affect the reading. On a vehicle, keep the doors and bonnet shut as they would be in normal use. If you tune with everything open, then drive with everything closed, the results can change. It is also worth checking on at least channel 1 and channel 40. That tells you more than a single reading in the middle band. If the SWR is higher on channel 1 than on 40, the aerial is usually too short. If it is higher on 40 than on 1, the aerial is usually too long. If it is high across the whole band, the issue is more likely with the mount, coax or earthing. ## The most common cause – poor grounding For many mobile installs, the biggest culprit is a poor earth. A lot of CB aerials, especially body-mounted types, rely on the vehicle bodywork to form part of the antenna system. If the mount is not making a good electrical connection to bare metal, SWR can climb quickly. Powder coating, paint, rust, underseal and insulating washers in the wrong place can all interfere with the earth path. This is very common on 4×4 accessories like roof bars, spare wheel carriers, light mounts and brackets that look solid mechanically but are electrically poor. [Mag mount aerials](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting/) are a bit different because they use capacitive coupling through the roof panel rather than a direct earth in the same way as a conventional mount. Even so, placement still matters, and using one on a small panel or awkward edge can cause poor results compared with the middle of a decent steel roof. If you have a body mount, inspect the bracket and mounting faces closely. Clean back to bare metal where needed and make sure the mount hardware is assembled correctly. If the bracket itself is mounted to something isolated from the body, you may need a proper earth strap. ## Aerial position affects SWR more than many people expect Where the aerial sits on the vehicle makes a real difference. The best position electrically is usually central and high, because the antenna gets a more balanced ground plane. On a car that often means the centre of the roof. On a 4×4, that is not always practical, especially with roof tents, racks, branches and height restrictions to think about. So there is a trade-off. A gutter mount, mirror mount or rear body mount may be more practical and better protected, but it can be harder to tune well because the aerial is no longer sitting in an ideal position. That does not mean the setup cannot work properly. It just means the installation needs a bit more care. If the antenna is right next to a roof rack, light bar, ladder, snorkel or spare wheel, those nearby metal objects can detune it. Moving the aerial even a small distance can improve matters. The same goes for long fibreglass whip antennas mounted too close to bodywork. ## Check the coax before blaming the aerial A surprising number of high SWR problems come from the cable run. Coax that has been crushed under trim, kinked sharply, trapped in a tailgate, soaked through, or fitted with a poor PL259 can cause serious mismatch. Look for obvious damage first. Then inspect both ends of the cable and make sure the centre pin and braid have been fitted cleanly. A short between the braid and centre conductor will usually give a very poor reading. An open circuit can do the same. Cheap patch leads and badly soldered plugs are common trouble spots. Cable length myths still do the rounds, so it is worth being plain about it. You do not fix a bad SWR by randomly chopping coax shorter or longer. The right answer is to fix the fault in the antenna system. Coax length can affect what the meter shows in some setups, but it does not cure an underlying mismatch. ## Tuning the aerial properly If the mount and coax are sound, the next step is tuning the aerial itself. Most CB antennas have some means of adjustment, such as a grub screw with a movable whip, a tunable tip or a cut-to-length design. Make small adjustments and retest. Do not take large chunks off a whip in one go because you can’t put them back. If the aerial uses an adjustable whip, move it a little at a time. If it is a cut-down type, trim very carefully. The aim is not to chase a perfect number at all costs. In real-world mobile installations, especially on off-road vehicles with compromised mounting points, a sensible low reading across the band is what you want. If you are getting an acceptable match and the setup is stable, that is far better than endlessly fiddling for a tiny improvement. ## When the aerial itself is the problem Sometimes the aerial is simply wrong for the mount or the use case. A no-ground-plane antenna and a standard [body-dependent antenna](https://cbradio.co.uk/product/sirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount/) are not interchangeable in every installation. If you are fitting to a fibreglass body panel, plastic mounting point, mirror arm or other isolated structure, you may need a different antenna system altogether. Likewise, some very cheap antennas and mounts can be inconsistent. Poor build quality, loose loading coils or badly made fittings can create faults that waste hours of troubleshooting. If everything else checks out, the antenna or mount may be defective. This is where buying from a CB specialist helps. Matching the aerial type to the vehicle and mounting location saves a lot of frustration later. ## A few fault patterns worth knowing If your SWR is extremely high on every channel, stop transmitting until you have checked the basics. That often points to a major fault such as no earth, damaged coax, a shorted plug or a broken mount. If the reading changes wildly when you move the cable, open a door or touch the mount, that usually suggests a grounding or connection issue rather than simple tuning. If the SWR was once fine and has suddenly gone bad, think about what has changed. Water ingress, corrosion, impact damage and a cable pinched during other vehicle work are common causes. If the installation is on a modern vehicle with lots of accessories and coated parts, expect a bit more effort. Newer bodywork and aftermarket brackets do not always provide the clean metal-to-metal path older installs relied on. ## Why is my SWR high after I fitted a new mount or bracket? This is one of the most common questions we hear. A new bracket can look better made and feel more solid, yet give worse SWR than the old one. Usually that comes down to electrical contact. Fresh paint, powder coating or rubber isolation can stop the bracket from grounding properly even though it is physically secure. The fix is not always to replace parts straight away. First confirm that the mount is bonded correctly, the hardware stack is right, and the bracket has a real path to vehicle ground. On rear door and spare wheel carrier mounts in particular, hinges and painted joints can complicate things. ## When to stop fault-finding and ask for help There is a point where guessing becomes expensive. If you have checked the meter setup, mounting position, earth, coax and tuning adjustment and the SWR is still poor, it is worth getting a second opinion. A known-good aerial, mount or patch lead can narrow the issue down very quickly. For many drivers, especially if the vehicle is used for work or regular off-road trips, the goal is not laboratory perfection. It is a dependable setup that performs properly and does not risk the radio. If you are unsure which aerial suits your vehicle or mounting point, getting the right advice before buying is often easier than correcting a mismatched install later. A high SWR is usually the system telling you something specific, not random bad luck. Work through it methodically, fix the cause rather than the symptom, and your CB setup will reward you with better range, cleaner performance and fewer headaches next time you key up. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Why%20Is%20My%20SWR%20High%20on%20a%20CB%20Aerial%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fwhy-is-my-swr-high-on-a-cb-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/why-is-my-swr-high-on-a-cb-aerial/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio vs Walkie Talkie: Which Fits?](https://cbradio.co.uk/cb-radio-vs-walkie-talkie/) **Published:** June 15, 2026 **Author:** **Excerpt:** CB radio vs walkie talkie - learn the real differences in range, setup, licensing, vehicle use and signal performance for UK users. **Content:** If you are weighing up cb radio vs walkie talkie, the first question is not which one is better. It is where, how and with whom you need to communicate. A green lane convoy, a work site, a campsite and a family day out all place very different demands on radio gear, and the right choice usually comes down to range expectations, vehicle setup and how serious you are about dependable contact. A lot of buyers arrive thinking a walkie talkie is the simple option and a CB is the old-school one. That is only half true. Walkie talkies are quick to put into service, but CB still earns its place where vehicles, distance and more consistent communication matter. If you are fitting out a 4×4, running in convoy or looking for a proper mobile installation, the differences become very clear quite quickly. ## CB radio vs walkie talkie at a glance The biggest difference is that a CB radio is usually a fixed or semi-fixed setup, often installed in a vehicle or used as a base station, while a walkie talkie is a handheld unit designed for portability. That one distinction affects nearly everything else, from antenna size to power source to how well the radio performs once you are away from ideal conditions. A handheld walkie talkie is convenient because you can charge it, clip it on and go. It suits people moving on foot, marshals at events, farm use around buildings, or short-range contact where ease matters more than outright performance. A CB radio takes more commitment. You normally need the radio itself, a suitable aerial, a proper mount and a sensible installation. In return, you usually get a more capable setup for vehicle-to-vehicle use. That trade-off matters. If you want instant portability, a walkie talkie wins. If you want a proper [in-vehicle communication system](https://cbradio.co.uk/automotive-communications-what-are-the-options/) with a stronger external antenna and more consistent performance on the road or off it, CB is often the better fit. ## Range is where most comparisons go wrong People understandably focus on range first, but radio range is never just a number printed on a box. Terrain, buildings, weather, antenna quality, vehicle bodywork and even how the set is held all affect results. With walkie talkies, advertised distances can be optimistic. In open ground, with clear line of sight, you may get respectable performance. In woodland, hilly terrain, quarries, urban areas or among vehicles, the real-world range usually drops. Handheld units are limited by their small antennas and lower practical operating position. A CB radio fitted with a [decent external aerial](https://cbradio.co.uk/product/black-mini-springer-4x4-cb-radio-aerial-with-mag-mount/) on a vehicle often has the edge in this kind of real-world use. That is especially true for 4×4 groups, road runs and motorway driving where vehicles spread out over distance. The aerial does a lot of the heavy lifting. A well-installed CB with a properly matched antenna can outperform a handheld setup simply because the system is built for mobile communication rather than pocket convenience. This does not mean CB always reaches farther in every situation. If two people are walking around a site or working close together, walkie talkies can be the more sensible choice. But if your expectation is reliable vehicle-to-vehicle contact over changing terrain, CB generally gives you more to work with. ### Why antenna size matters Antenna performance is one of the main reasons CB stays relevant. A handheld set has obvious limits because the antenna has to remain compact. A mobile CB setup can use a much larger aerial mounted externally, which helps transmit and receive more effectively. For off-road drivers, that is a practical advantage, not just a technical one. A convoy does not stop being a convoy because the terrain gets awkward. When vehicles dip into ruts, disappear behind trees or spread out across a trail, a stronger mobile setup becomes worth having. ## Setup and ease of use Walkie talkies are easier for beginners to understand. Charge the battery, set the channel, hand one to the other person and you are in business. For families, event teams or casual users, that simplicity is hard to beat. CB takes a bit more thought. In a vehicle, you need to choose where the radio will sit, how it will be powered and where the aerial will be mounted. You also need to make sure the antenna is suitable for the installation and, in many cases, tuned correctly. That sounds like a drawback, and for some buyers it is. But it is also why a CB system can feel more dependable once fitted properly. There is another practical point here. A mounted microphone and speaker setup is easier to use while driving than fumbling for a handheld unit. For regular road users, off-roaders and anyone who wants communication as part of the vehicle rather than an extra item in the glove box, that makes a real difference. ## What works better in vehicles? This is where cb radio vs walkie talkie becomes much less of a 50-50 question. Inside a vehicle, a handheld walkie talkie is often compromised by the metal body around it. Signal can suffer, battery life can become another thing to manage, and the whole arrangement tends to feel temporary. A CB radio is made for this environment. Powered from the vehicle, paired with an external aerial and mounted where it can actually be used, it becomes part of the vehicle setup. For 4×4 clubs, agricultural users, road convoy driving and anyone travelling in more than one vehicle, that is usually the cleaner solution. That is also why many experienced users still stick with CB. It is not nostalgia. It is practicality. If the radio needs to work every time you head out, a dedicated mobile installation often makes more sense than relying on handhelds that were not designed around vehicle bodywork. ### Off-road and rural use Off-road driving exposes weak equipment quickly. Mud, vibration, weather and uneven terrain are all harder on radio gear than casual leisure use. CB equipment, when chosen properly, tends to suit that world better because there is a strong ecosystem of mobile sets, mounts, mics and antennas built around exactly those conditions. Walkie talkies can still be useful in the same setting, particularly if someone is outside the vehicle spotting obstacles or guiding manoeuvres. That does not make them a direct replacement for a proper mobile radio. In many groups, the two types of radio end up serving different jobs. ## Cost, accessories and long-term value At entry level, walkie talkies can look cheaper. For occasional use, they often are. If all you need is short-range handheld communication a few times a year, there is no need to overcomplicate it. CB usually involves a higher starting cost because you are buying into a system. The radio is only part of it. You may also need an aerial, mount, extension speaker, power lead or fitting accessories. But looking at price alone misses the point. If the radio is going into a vehicle you use regularly, and reliable communication matters, that extra spend often buys better everyday usability. It also helps that CB setups can be upgraded. You can change the antenna, improve the mounting position or add accessories over time. For enthusiasts and regular users, that flexibility is part of the appeal. Specialists such as CB Radio UK cater to that sort of buyer because one-size-fits-all rarely works once you move beyond the basics. ## Which should you choose? Choose a walkie talkie if portability is the priority, your users will be on foot, and your communication needs are short-range and fairly simple. They are also handy when you need a radio that can be passed around with very little setup. [Choose a CB radio](https://cbradio.co.uk/why-a-cb-radio-is-a-good-investment/) if you want dependable vehicle-to-vehicle communication, plan to drive in convoy, spend time off-road, or want a setup built around your 4×4, van or homebase. It asks more of you at the start, but it gives more back in the right setting. The honest answer is that neither product replaces the other perfectly. A walkie talkie is a convenience tool. A CB radio is a proper communication setup. For many UK users, especially in the off-road and mobile radio community, that distinction matters more than any headline range claim. If you are still undecided, think about the moment the radio actually needs to earn its keep. If it is clipped to a belt for quick local chatter, go handheld. If it is there to keep your vehicles talking when the terrain, distance and conditions stop being easy, CB remains hard to beat. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-vs-walkie-talkie/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-vs-walkie-talkie/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-vs-walkie-talkie/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-vs-walkie-talkie/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20vs%20Walkie%20Talkie%3A%20Which%20Fits%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-vs-walkie-talkie%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-vs-walkie-talkie/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-vs-walkie-talkie/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-vs-walkie-talkie/?share=telegram) - **Categories:** Uncategorised --- ### [How to Use CB 10 Codes Properly](https://cbradio.co.uk/how-to-use-cb-10-codes/) **Published:** June 13, 2026 **Author:** **Excerpt:** Learn how to use CB 10 codes properly in the UK, when they help, when plain speech is better, and how to keep radio chats clear on the road. **Content:** If you have ever listened to a busy CB channel and heard someone say “10-4” or “10-20”, you have already met the shorthand. Knowing how to use CB 10 codes can make radio traffic quicker, tidier and easier to follow, especially when you are mobile, off-road or travelling in a group. The trick is using them at the right time, with the right people, and without turning a simple message into a guessing game. CB 10 codes were designed as short verbal signals to pass common information over the air. Instead of a full sentence, you use a number code that stands for a phrase. In theory, that saves airtime. In practice, it depends who you are talking to. Some operators know them well. Others only know the classics. That is why good CB operating is not about sounding clever. It is about being understood first time. ## What CB 10 codes are actually for The main purpose of 10 codes is speed and clarity. On a noisy channel, or when several vehicles are trying to keep in touch, a short recognised code can cut through where a rambling sentence does not. If you are convoying in 4x4s, passing road information, or checking where another operator is, short coded phrases can help keep things brief. That said, CB is not a police network or a dispatch office. On normal UK CB use, plain English is often just as effective. If your passenger, mate in the next motor, or another station on channel does not know the code, the time saved disappears straight away. You then have to explain what you meant, which defeats the point. So the sensible view is this: 10 codes are useful shorthand, not a rulebook. Use them when they improve communication. Skip them when plain speech is clearer. ## How to use CB 10 codes without confusing people The biggest mistake beginners make is trying to use too many codes too soon. You do not need to memorise a whole page of them before getting on air. Start with the few that come up most often and build from there. “10-4” is the one nearly everyone recognises. It means message received or understood. “10-20” is commonly used for location. “10-9” means say again. “10-1” usually means poor reception. “10-7” can mean out of service, and “10-8” back in service. Even with these, there can be slight variations depending on who taught them and where they learned radio. That variation matters. One operator’s standard list is not always the next operator’s. Some codes carried over from American usage. Some have been adapted by CB users over time. Some are better known in transport circles than among casual hobby users. If you are talking with a regular group, agree what you mean by the common ones and keep it consistent. ## Common situations where 10 codes help Convoy work is one of the best examples. If several vehicles are moving together, the lead vehicle can pass quick information without tying up the channel. A short “What’s your 10-20?” is often easier than a longer request for location, particularly if the signal is patchy. Off-road runs are another good fit. When the terrain is rough and everyone is concentrating on driving, short messages reduce clutter. If one vehicle is stopped, another is spotting, and a third is bringing up the rear, clear brief transmissions matter. They can also work well for homebase and mobile checks. If you are just confirming contact, reception quality, or whether someone is available, a short code can do the job cleanly. But if the message has any real detail in it, plain language usually wins. ## When plain English is the better option If the message involves safety, directions, or anything that could be misunderstood, spell it out. That is especially true when speaking to mixed users on a [public CB channel](https://cbradio.co.uk/automotive-communications-what-are-the-options/). Not everybody will know the same shorthand, and even experienced operators can mishear numbers if the signal is weak. For example, if you are warning another driver about a hazard, saying exactly what and where it is will often be more helpful than relying on coded speech. The same goes for mechanical issues, route changes, or access problems on green lanes and byways. Brevity is useful, but not at the cost of accuracy. There is also the human side of radio. A lot of CB use is social. If you overdo the codes, you can sound forced. Most seasoned operators would rather hear a straightforward, readable call than someone stuffing every sentence with numbers. ## A practical way to learn how to use CB 10 codes The easiest way to learn is to treat CB 10 codes as working tools, not trivia. Pick five or six you are actually likely to use. Learn their meaning, say them out loud, and use them naturally when appropriate. Once those stick, add a few more. It helps to keep a printed code sheet in the vehicle or near the base station when you are starting out. That is not cheating. Plenty of operators have reference notes for radio settings, channel plans, or mic wiring. The point is to get it right on air, not pretend you know more than you do. Listen before you transmit. If the people on channel are using plain speech, match that style. If you are in a regular group that uses a handful of 10 codes sensibly, match that instead. Good radio manners are as much about fitting the conversation as knowing the hardware. ## How to sound clear on air Using CB 10 codes properly is only part of the job. Delivery matters just as much. Speak at a steady pace, hold the microphone at a sensible distance, and avoid mumbling the numbers together. “Ten four” spoken clearly is better than “tenfer” fired into the mic at speed. Keep transmissions short, but not clipped to the point of being awkward. If you ask for a “10-20”, give the other operator a moment to reply. Do not stamp on someone else’s transmission because you are trying to sound efficient. If reception is poor, it is often better to drop the code and use plain words. Numbers can blur together in weak audio. A direct “Say again your location” may come through better than “10-9 your 10-20”. It depends on the radio, the microphone, the installation and the conditions at the time. ## UK users should expect some mixed habits In the UK, CB operating style is a mix. Some users enjoy the traditional radio language and know a fair few 10 codes. Others only use one or two. Many newer users, especially those coming in through off-road groups or starter kits, tend to use mostly plain English with the occasional “10-4”. That is normal. CB has always been shaped by local habits, the people on your channels, and what sort of operating you do. A green laning group, a pair of motorists on a run out, and a long-time hobby operator at home may all use slightly different language. None of that is a problem if the communication works. If you are setting up a group from scratch, keep your code use simple. Decide on the handful you want everyone to know and leave the rest unless there is a real need. That approach usually gives better results than trying to impose a long list nobody remembers. ## The trade-off between tradition and practicality There is a reason 10 codes still hang around. They are part of CB culture, and when used well they do add a bit of order and character to radio traffic. For plenty of enthusiasts, learning them is part of the fun. But tradition should not get in the way of communication. The best operators are not the ones who know the longest code sheet. They are the ones who can judge the situation, keep the channel tidy, and pass useful information clearly. Sometimes that means a quick “10-4”. Sometimes it means speaking plainly and moving on. If you are new to the hobby, do not worry about getting every code perfect from day one. Focus first on a decent radio setup, a [properly matched aerial](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/), and clear operating habits. Once your station is working well, the language side becomes much easier. And if you need the basics of radio use, aerial choice or practical CB gear for vehicle and [homebase setups](https://cbradio.co.uk/cb-power-supply-for-homebase/), that is where a specialist retailer such as CB Radio UK earns its keep. Learn the common codes, use them where they help, and never be afraid to drop back into plain English. The best radio traffic is the kind everyone understands first time. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-use-cb-10-codes/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-use-cb-10-codes/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-use-cb-10-codes/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-use-cb-10-codes/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Use%20CB%2010%20Codes%20Properly&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-use-cb-10-codes%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-use-cb-10-codes/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-use-cb-10-codes/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-use-cb-10-codes/?share=telegram) - **Categories:** Uncategorised --- ### [Multimode CB Radio Review for UK Buyers](https://cbradio.co.uk/multimode-cb-radio-review-uk-buyers/) **Published:** June 11, 2026 **Author:** **Excerpt:** Multimode CB radio review for UK buyers. See what matters in performance, legal use, fitment and features before choosing your next rig. **Content:** A multimode CB radio review is only useful if it answers the question most buyers actually have – will this set suit the way you use your vehicle, your routes and your aerial setup? That matters far more than a long feature list. For some users, multimode is the right upgrade. For others, a solid UK FM or AM/FM set will do the job just as well without added cost or complexity. In the UK market, multimode CB radios tend to appeal to drivers who want more flexibility, more channels and access to sideband operation where legal and appropriate. They are especially popular with experienced users, off-road groups, hobbyists and anyone building a more capable mobile or homebase station. But they are not automatically the best choice for every installation, and that is where a proper look at the trade-offs helps. ## What a multimode CB radio actually gives you In straightforward terms, a multimode CB radio supports more than one transmission mode. Depending on the model, that usually means FM, AM and SSB – single sideband, split into USB and LSB. On a basic set, you may only have FM, or FM and AM. On a multimode radio, you are getting a broader operating range in terms of how you can communicate. That extra flexibility is the main selling point. FM is often the simple everyday choice for local chatting. AM remains relevant on certain bands and among users who prefer older-style sets. SSB is where multimode starts to interest more serious operators because it can offer greater efficiency and, in the right conditions, better long-distance potential. The catch is that SSB operation demands more from both the radio and the user. Tuning needs a bit more care, voices can sound off if clarifier adjustment is poor, and your aerial system needs to be properly matched. If you want something you can fit and forget, a simpler radio may be the better answer. ## Multimode CB radio review – what separates a good set from a poor one The first thing to look at is not the flashy bit on the box. It is basic radio quality. A good multimode set should receive clearly, transmit consistently and feel stable in use. Cheap radios can promise the world on paper but still disappoint with noisy receive audio, awkward controls or inconsistent frequency stability. Build quality matters more in a vehicle than many buyers expect. A radio that lives in a 4×4, van or lorry has to cope with vibration, temperature changes and regular handling. Buttons should feel positive, knobs should not wobble, and the microphone socket should not feel flimsy. A budget set that feels tired after a few months is no bargain. Audio is another big divider. Some radios sound sharp and easy to understand through the internal speaker, while others benefit from an extension speaker straight away. If you drive in a [noisy cab](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/) or use the set off-road with engine and tyre noise in the background, clear audio is not a luxury. It is the difference between hearing the message first time and asking for a repeat. Then there is usability. A multimode radio can include extra controls for mode selection, clarifier, band switching, RF gain and more. That is fine if the layout is sensible. It is less fine if every adjustment feels like guesswork while you are trying to keep one eye on a green lane or a busy dual carriageway. ## Performance depends on the installation This is the part many reviews gloss over. The radio is only one piece of the setup. A strong multimode rig with a poor aerial will still perform badly. A modest radio with a properly chosen antenna, good grounding and a tidy installation will often surprise people. For mobile use, the aerial choice matters just as much as the set itself. [Magnet mounts](https://cbradio.co.uk/mag-mount-vs-fixed-antenna/) can be convenient, but they are not always ideal for demanding use, especially on rough ground or where the bodywork position is poor. A fixed mount installation can offer a more secure and consistent result. Length also matters. Short aerials can be practical, but there is usually a performance compromise compared with a well-sited longer whip. Power wiring matters too. A radio fed from a clean, direct supply will generally behave better than one suffering voltage drop or electrical interference. If you hear alternator whine or other vehicle noise, the issue may not be the radio at all. It may be the installation. For homebase users, the same principle applies. Feedline quality, [SWR](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/), antenna height and local noise levels all shape the result. A multimode radio cannot fix poor siting or a badly matched aerial. ## Who should buy a multimode set If you are mostly after simple local chat on UK channels, a basic FM or AM/FM radio may be the more sensible buy. It will usually cost less, take less setting up and be easier for occasional users to operate. That is often the right answer for casual use, convoy driving and straightforward day-to-day communication. A multimode radio starts to make more sense if you already know you want SSB capability, if you enjoy the hobby side of CB, or if you need a set with wider operating options. Many experienced users prefer multimode because it gives them room to grow. You may start by using FM locally, then later explore sideband once the rest of your setup is sorted. For off-road groups and 4×4 users, it depends how the radio will be used. If everyone in the group is on straightforward UK settings, a basic radio keeps life simple. If the group includes experienced operators using a wider range of modes, a multimode set can be worthwhile. The key is buying for your real use, not for a list of features you may never touch. ## Features worth paying for, and those that are not A clear meter, good channel display and intuitive controls are worth having. So is a strong microphone, decent heat management and a receiver that stays listenable over long periods. RF gain and mic gain controls can be genuinely useful when they are implemented properly. A noise blanker or ANL feature can also help in electrically noisy vehicles. By contrast, not every extra switch adds real value. Some radios pile on styling, lights and marginal features that look impressive but do little for performance. If a set feels overcomplicated for the sake of it, that is usually a warning sign rather than a selling point. One feature experienced users often appreciate is stable sideband performance. This does not make the glossy brochure, but it makes a difference on the air. If the radio drifts or is fiddly to net in, the novelty wears off quickly. ## Common buying mistakes in a multimode CB radio review The biggest mistake is buying the radio before planning the full installation. That often leads to a strong set being paired with an unsuitable aerial, poor mount position or bargain-basement coax. The result is disappointment that gets blamed on the radio. The second mistake is overbuying. Plenty of people are attracted to a multimode model because it sounds like the serious option. Sometimes it is. Sometimes it is just more radio than they need. If your use is occasional and local, spending the difference on a better aerial, mount and speaker may give a better real-world result. The third mistake is ignoring legality and band use. Different radios offer different coverage and capabilities, and buyers should always make sure the set is suitable for legal use in their operating context. A specialist retailer can help clear that up before money is spent. ## Our verdict on choosing the right multimode CB The best multimode CB radios are not simply the ones with the longest specification sheet. They are the sets that combine stable performance, sensible controls, good audio and enough flexibility to suit the operator using them. For an experienced user with a proper aerial and a clear idea of what they want from FM, AM and SSB, a multimode set can be a very worthwhile upgrade. For a beginner, the answer is more mixed. If you want room to learn and do not mind a steeper setup process, multimode can be a smart long-term buy. If you want quick, dependable communication with minimum fuss, a simpler radio may be the better place to start. At CB Radio UK, the practical advice is the same as ever – match the radio to the vehicle, the aerial, the type of use and your own experience level. Buy with the whole installation in mind, not just the front panel. Get that part right, and the radio has every chance of doing the job properly from the first call onwards. If you are choosing between a basic set and a multimode model, do not chase features for their own sake. Think about where you drive, how you communicate and what you want the setup to do six months from now. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/multimode-cb-radio-review-uk-buyers/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/multimode-cb-radio-review-uk-buyers/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/multimode-cb-radio-review-uk-buyers/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/multimode-cb-radio-review-uk-buyers/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Multimode%20CB%20Radio%20Review%20for%20UK%20Buyers&body=https%3A%2F%2Fcbradio.co.uk%2Fmultimode-cb-radio-review-uk-buyers%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/multimode-cb-radio-review-uk-buyers/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/multimode-cb-radio-review-uk-buyers/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/multimode-cb-radio-review-uk-buyers/?share=telegram) - **Categories:** Uncategorised --- ### [How to Improve CB Reception Properly](https://cbradio.co.uk/how-to-improve-cb-reception/) **Published:** June 9, 2026 **Author:** **Excerpt:** Learn how to improve CB reception with practical fixes for aerial position, SWR, grounding, noise and setup issues on mobile or home CB systems. **Content:** If your CB sounds full of hiss, weak voices or electrical crackle, the fix is usually not the radio itself. When people ask how to improve cb reception, the answer nearly always comes back to the aerial system, the installation, and the noise around the set. Get those right and even a modest CB can perform far better than many expect. A lot of poor reception is blamed on the wrong part. Users replace microphones, radios and speakers when the real problem is an aerial mounted in a poor spot, a badly tuned setup, or interference from the vehicle. The good news is that most reception problems can be improved without turning the whole installation upside down. ## How to improve CB reception starts with the aerial The aerial does the heavy lifting. You can have a capable radio in the cab, but if the aerial is too short, badly mounted or poorly tuned, reception will always be compromised. On CB, transmit and receive performance are closely linked, so if the aerial system is poor on one side, it is usually poor on the other as well. For mobile use, placement matters more than many realise. A roof-mounted aerial generally gives a better all-round signal than one fixed low down on a bumper, mirror bracket or rear corner. Height helps, and so does keeping the aerial in the clear. If large parts of the vehicle body sit around it, they can shield signals from certain directions. That does not mean every vehicle can take a centre-roof mount. On a 4×4, van or work vehicle, practicality often decides the position. If a roof mount is not possible, aim for the highest, most open location you can manage. A rear body mount may be convenient, but it often gives less balanced performance than a higher mounting point. Aerial length also makes a difference. In general, a longer CB aerial tends to hear better than a very short loaded one. Short aerials are useful when clearance is an issue, especially off-road or in car parks, but there is a trade-off. They are compact and easier to live with, yet they usually give up some performance compared with a longer whip. ## Check SWR before chasing other faults If the aerial is not tuned correctly, reception can suffer and transmit performance certainly will. That is why an SWR check should be near the top of the list. It is a basic job, but one that tells you a lot about how well the radio and aerial are working together. A poor SWR reading can point to several issues. The aerial may need adjusting, the mount may not be earthing properly, the coax could be damaged, or a connector may be badly fitted. On [magnetic mounts](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-so239-thread/), even the location on the roof can alter the reading. On body mounts, paint, powder coating or corrosion can affect the ground connection. Do not assume a newly fitted aerial is correct straight from the box. Even good equipment needs setting up on the vehicle it is actually being used on. The shape of the bodywork, where the mount sits, and the route of the cable all influence the final result. ### Bad coax and connectors cause more trouble than people think Coaxial cable is often ignored because it looks simple. In practice, it is a common source of weak or noisy reception. A cable trapped in a door seal, kinked tightly, rubbed through on metalwork or filled with water can all drag performance down. PL plugs and mount connections deserve a close look too. A loose plug, poor soldering, or corrosion at the mount can create losses and intermittent faults that sound like fading stations or bursts of static. If the installation is older, inspecting the full cable run is worth the time. ## Reduce electrical interference in the vehicle Many reception complaints are not about weak signal at all. They are about noise. Modern vehicles can be very noisy electrically, and even older 4x4s can produce plenty of hash from ignition systems, LED lighting, chargers, inverters and other accessories. If the noise changes with engine speed, you are likely hearing interference generated by the vehicle. If it appears when certain accessories are switched on, that narrows the fault further. Cheap USB chargers, dash cams, LED light bars and poorly suppressed power supplies are regular offenders. Start by powering the radio correctly. A direct fused feed from the battery often gives cleaner results than tapping into an existing accessory circuit. Good negative return paths matter as much as the positive supply. Loose earths can make noise worse and cause unstable performance. You can also test the radio with the engine off. If reception improves dramatically, the set is probably fine and the issue is interference rather than radio sensitivity. Ferrite chokes, better routing of power leads, and replacing noisy accessories can make a noticeable difference. ### Squelch and RF gain need sensible adjustment Some users accidentally tune out the signals they want to hear. If the squelch is wound up too far, weaker stations never break through. If RF gain is turned down, the receiver becomes less sensitive by design. For the best chance of hearing distant or weaker stations, keep RF gain fully up unless local conditions are especially busy. Then set the squelch just high enough to cut background hiss. Too much squelch makes the set sound tidy, but it also hides useful traffic. ## Improve the listening side of the setup Reception is not only about what reaches the aerial. It is also about how clearly you can hear it. In a noisy cab, a weak station can be there but difficult to make out over road noise, tyres and engine sound. An [external speaker](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/) often helps more than expected. A decent extension speaker placed closer to the driver can make speech clearer than the radio’s built-in speaker, particularly in commercial vehicles and off-road setups. Clarity matters just as much as raw volume. If your set includes ANL or noise blanker functions, try them. They can reduce certain kinds of interference, especially pulse noise, although results vary. They will not cure every electrical problem, but they can make the receiver more usable in the real world. ## Homebase and mobile setups need different thinking A base-station CB and a mobile CB face different problems. At home, height and surrounding obstructions become major factors. Houses, nearby roofs, trees and local electrical noise all affect what you hear. For home use, getting [the aerial higher](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm/) and more in the clear is often the single biggest improvement. Even a modest increase in height can help reception because the aerial has a better view over nearby obstructions. As with mobile setups, cable quality and proper connections still matter. At home, interference may come from inside the property rather than outside it. Switch-mode power supplies, broadband equipment, solar systems and LED lighting can all add noise. A simple test is to power down likely devices one by one and listen for changes. ### Terrain and conditions still matter Sometimes the installation is fine and the limitation is simply geography. CB is affected by hills, buildings, woodland and distance. If you are in a valley, surrounded by industrial units or working deep in wooded off-road terrain, reception will never match an open hilltop site. That is why two users with similar equipment can report very different results. One may have a clear route across open ground, while the other is boxed in by terrain or urban clutter. It is worth being realistic about that before assuming the radio is faulty. ## A practical order for fixing poor CB reception If you want to know how to improve cb reception without wasting money, work through the setup in a sensible order. First, inspect the aerial position and mount. Then check SWR and the physical condition of the coax and plugs. After that, look at power supply routing and possible sources of interference. Finally, adjust squelch, RF gain and speaker setup so you are hearing everything the radio is capable of receiving. This order matters because replacing the radio rarely cures a poor aerial installation. A better set fitted to the same weak mount and noisy wiring will still disappoint. By contrast, a properly installed aerial system can transform even a basic rig. There are cases where upgrading equipment makes sense. If you are using a very compromised short aerial, moving to a better quality or longer model can help. If the speaker is poor, replacing it may improve intelligibility. If the coax or mount is suspect, fit good parts rather than chasing faults indefinitely. But upgrades work best when they solve a known weakness. For many users, especially those fitting out a 4×4 or work vehicle, the best result comes from treating the CB as a complete system rather than a box on the dashboard. At CB Radio UK, that is usually where the real gains are found – matching the right aerial, mount, cable and accessories to the way the vehicle is actually used. If your reception has been disappointing, do not write the set off too quickly. A few careful checks on the aerial, wiring and noise sources often make the difference between a CB that merely powers up and one that is genuinely useful when you need it most. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-improve-cb-reception/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-improve-cb-reception/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-improve-cb-reception/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-improve-cb-reception/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Improve%20CB%20Reception%20Properly&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-improve-cb-reception%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-improve-cb-reception/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-improve-cb-reception/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-improve-cb-reception/?share=telegram) - **Categories:** Uncategorised --- ### [Mag Mount vs Fixed Antenna: Which Wins?](https://cbradio.co.uk/mag-mount-vs-fixed-antenna/) **Published:** June 7, 2026 **Author:** **Excerpt:** Mag mount vs fixed antenna - learn which suits your CB setup best for signal, grounding, durability, fitting ease and everyday UK vehicle use. **Content:** You usually notice the difference between a mag mount and a fixed antenna the first time you hit a low branch, a car park barrier, or a muddy lane in poor weather. On paper, both will get your CB on the air. In real use, the mag mount vs fixed antenna question comes down to how permanent you want the installation to be, how hard you use the vehicle, and how much performance you expect from the aerial system. For some drivers, a magnetic mount is exactly the right answer. It is quick to fit, easy to move, and ideal if you do not want to drill the vehicle. For others, especially regular off-road users, agricultural drivers, and anyone who depends on consistent comms, a fixed mount will usually make more sense. Neither is automatically better in every case. The right choice depends on the vehicle, the terrain, and how serious you are about your setup. ## Mag mount vs fixed antenna: the real difference The simplest way to look at it is this. A mag mount is about convenience. A fixed antenna is about commitment. A magnetic mount aerial sits on a steel body panel, usually the roof, and uses magnetic grip to hold position. The coax runs through a door, boot opening, or another entry point into the cab. It is popular because it avoids drilling and can be installed in minutes. A fixed antenna mount is bolted or bracket-mounted to the vehicle, often on a wing, mirror arm, gutter, roof bar, bumper bracket, or dedicated body mount. It takes more effort to install properly, but it gives you a more secure and usually more dependable long-term setup. That difference affects almost everything else – signal performance, earth plane, cable routing, durability, and day-to-day practicality. ## Signal performance and grounding If you are chasing the best possible performance, fixed mounts usually have the edge. That is not because a mag mount cannot work well. Many do. It is because a fixed installation tends to give you a more stable mechanical fit and, when mounted correctly, a more predictable electrical setup. With CB aerials, grounding matters. A proper fixed body mount can provide a stronger, cleaner earth connection to the vehicle chassis or bodywork. That can help with tuning and consistency, especially when paired with a decent antenna and carefully routed coax. A mag mount relies on capacitive coupling through the mount base to the metal panel underneath. In many mobile CB setups this works perfectly well, but it can be a bit more sensitive to placement, paint thickness, and body shape. If the roof panel is large and steel, performance can be very respectable. If the vehicle has limited suitable metalwork, things get less ideal. For everyday road use, plenty of operators are happy with a good mag mount on the centre of the roof. For harder use, or if you are trying to get the best from a longer antenna, fixed tends to be the stronger option. ### Roof position often beats mount type There is one important point that gets missed. A well-placed mag mount in the centre of the roof can outperform a poorly positioned fixed antenna on a wing or low bracket. Height and position matter enormously. So if the choice is between a mag mount high and central, or a fixed mount low down beside other metalwork, the magnetic option may actually give you the better signal pattern. The mount type is only part of the story. ## Durability on the road and off it This is where fixed mounts really start to pull away for many 4×4 and working vehicle users. A mag mount is secure enough for normal driving if fitted properly to a clean panel and used within sensible limits. But it is still a temporary fixing. High speeds, strong crosswinds, branch strikes, repeated vibration, and rough tracks all put more strain on it. Add mud, water, and frequent removal, and the practical limits show up faster. A fixed antenna is harder to knock out of place and better suited to repeated use in demanding conditions. If you run green lanes, work in rural areas, or spend your weekends in convoy across uneven ground, that extra security matters. Aerials take a fair bit of abuse. A proper bracket and mount cope with it better. There is also the cable itself. On a mag mount, coax often passes through a door or hatch gap. That can be absolutely fine for occasional or moderate use, but over time it can pinch, wear, or let in a little water if routed carelessly. A fixed installation usually allows a tidier and better protected cable run. ## Fitting, removal, and flexibility If you lease the vehicle, change cars regularly, or simply do not want to drill bodywork, mag mounts have obvious appeal. Fit it when you need it, remove it when you do not, and transfer it to another vehicle later. That flexibility is a genuine advantage, not a compromise. For casual users, [newcomers to CB](https://cbradio.co.uk/best-cb-radio-for-beginners-uk/), and anyone testing out a setup before going further, a magnetic base is often the easiest entry point. You can get on the air quickly, learn what works for you, and upgrade later if needed. Fixed antennas ask more from you at the start. You need the right bracket, the right mounting point, and a bit more thought about cable routing and earthing. Done well, it is worth it. Done badly, it can be more trouble than the mag mount you were trying to improve on. That is why fixed is not always [the right first step](https://cbradio.co.uk/how-to-mount-cb-aerial/) for every buyer. If you are unsure whether the radio will stay in the vehicle long term, temporary can be sensible. ## Paintwork, theft, and everyday annoyance Mag mounts are convenient, but they are not maintenance-free. Dirt trapped under the base can mark paintwork if the mount shifts or is removed and refitted without cleaning. On a working 4×4 that may not be a major concern. On a newer vehicle, it often is. They are also easy to remove – which is handy for you, but potentially handy for someone else as well. If the vehicle is parked in public places or left for long periods, a removable aerial may need to come off each time. A fixed mount is less likely to be stolen quickly, less likely to move once set up, and less likely to become one more thing you have to take off before entering a car park. That said, some fixed antennas are taller and more awkward around height restrictions, so the convenience point can swing back the other way depending on the aerial you choose. ## Which is better for different users? For the occasional user, the beginner, or the driver who wants zero drilling, a mag mount is often the better buy. It is simple, cost-effective, and easy to live with. If your use is mostly road-based and your vehicle has a good steel roof, it can be an excellent solution. For the serious off-road user, the regular convoy driver, or the person who wants a proper long-term mobile installation, fixed usually comes out on top. It is more secure, more professional, and generally better suited to demanding conditions. If you run a lorry, van, or 4×4 with existing brackets or straightforward mounting options, fixed becomes even more appealing. If your vehicle shape makes roof mounting awkward, or if it uses body materials that are not ideal for magnetic mounting, fixed may not just be better – it may be the practical choice. ## Mag mount vs fixed antenna for tuning and SWR Whichever route you choose, tuning still matters. A [poor SWR reading](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/) is not magically solved by changing mount type alone. A fixed antenna can be easier to tune consistently because the installation is more permanent. Once you have the mount position, earth, and coax route sorted, it tends to stay that way. With a mag mount, moving the base even slightly can alter performance. Remove it, refit it elsewhere, or change cable routing, and the tuning may shift. That does not make mag mounts difficult. It just means they benefit from a bit of discipline. Put it in the same place, keep the base clean, route the coax neatly, and check SWR properly. If you treat the install casually, results can be patchy. ## So which one should you buy? If your priority is quick fitting, no drilling, and the option to move the antenna between vehicles, go for a mag mount. It is the sensible answer for plenty of UK drivers and hobby users. If your priority is durability, security, and a setup that will stay put through rougher use, buy a fixed antenna mount and do the job properly. For many 4×4 owners and regular CB users, that is money better spent. At CB Radio UK, this is usually the point where we tell customers not to buy on mount type alone. Look at the whole installation – vehicle type, antenna length, where it will sit, how often you use the radio, and whether this is a temporary setup or a keeper. Get those parts right and either system can work well. The best aerial is the one that suits the way you actually use the vehicle, not the one that wins an argument on paper. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/mag-mount-vs-fixed-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/mag-mount-vs-fixed-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/mag-mount-vs-fixed-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/mag-mount-vs-fixed-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mag%20Mount%20vs%20Fixed%20Antenna%3A%20Which%20Wins%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fmag-mount-vs-fixed-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/mag-mount-vs-fixed-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/mag-mount-vs-fixed-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/mag-mount-vs-fixed-antenna/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio Power Supply: What to Choose](https://cbradio.co.uk/cb-radio-power-supply-what-to-choose/) **Published:** June 5, 2026 **Author:** **Excerpt:** Choosing a cb radio power supply? Learn voltage, amperage, noise, and setup basics so your CB radio runs reliably at home or in the workshop. **Content:** A CB set that cuts out on transmit, picks up a loud hum, or behaves oddly at home is often blamed on the radio first. In plenty of cases, the real issue is the cb radio power supply. Get that part wrong and even a decent rig can feel unreliable. Get it right and your homebase setup becomes much more stable, quieter, and easier to live with. For UK users, the basic job is simple enough. Most CB radios are designed to run on 12V DC, while the mains supply in the house is 230V AC. That means you need a power supply that converts the mains safely and consistently into the low-voltage DC your radio expects. The details matter, though, because not every supply is equally suitable for radio use. ## What a CB radio power supply actually does A good power supply does more than just turn mains power into 12V. It should deliver a steady output under load, cope with the current your radio draws on transmit, and do it without introducing electrical noise into the receiver. That last point is where cheap general-purpose supplies often fall down. When you are listening on a quiet channel, background hiss is one thing. Electrical hash from a poor-quality supply is another. If the supply is noisy, your receiver can sound busy even when conditions are otherwise fine. For anyone using a base station regularly, especially in rural areas where weak signals matter, that gets irritating quickly. There is also the question of voltage stability. A CB radio is happiest when the supply voltage stays where it should. If the voltage sags badly when you key up, you may notice reduced performance, unstable behaviour, or display dimming. It does not always mean instant damage, but it is not a setup you would want to trust for long. ## How much power do you need? This is the first thing most buyers should check before choosing a cb radio power supply. The key figure is current, measured in amps. Your radio manual will usually show the transmit current draw, and that matters more than the receive figure because transmitting places the higher load on the supply. For a standard 4-watt CB radio, the current requirement is usually modest, but that does not mean you should buy right on the limit. If a radio draws, say, 4 amps on transmit, a 5-amp supply may work, but it leaves little headroom. A better choice is often a supply with extra capacity so it runs comfortably rather than flat out. That headroom helps with heat, long-term reliability, and general stability. It also gives you flexibility if you later add an extension speaker with powered accessories, change radios, or move to a different home setup. Buying too small often saves very little money and creates more hassle later. As a rule, match the supply to the radio you actually use, then allow sensible spare capacity. Bigger is not automatically better if the unit is poor quality, but undersized is rarely a clever buy. ## Regulated vs unregulated supplies This is one of the most important distinctions. A regulated power supply is designed to maintain a consistent output voltage. An unregulated one can vary more, especially depending on load. For CB radio use, regulated is generally the safer and more practical choice. Older unregulated supplies still turn up, and some users have run them for years without complaint. But if you want a cleaner, more dependable base station setup, a regulated unit is usually the better route. Modern radios and accessories are simply easier to live with when the supply is stable. If you are comparing products and the description is vague, that is worth paying attention to. A proper radio-ready supply should state the voltage and current clearly and give you confidence that it is intended for communication equipment rather than being a generic bench unit. ## Linear or switch mode? This is where the choice becomes a bit more technical, and the right answer depends on how you use your station. Linear power supplies have long had a solid reputation among radio users because they are often electrically quieter. They tend to be heavier and bulkier, but many operators like them for homebase use where low noise is a priority. If your station stays on a desk or bench and you want a traditional, dependable option, linear still has plenty going for it. Switch mode supplies are lighter, more compact, and often more efficient. A good one can work very well with CB equipment, but quality matters. Poorly designed switch mode units can introduce interference across the receiver. That does not mean every switch mode supply is a bad choice. It means you should pick one intended for radio use rather than a cheap no-name unit that happens to output 12V. For some users, the trade-off is straightforward. If space and weight are not an issue, a linear supply can be reassuringly simple. If you want something smaller and easier to place in a workshop or radio shack, a decent switch mode model may suit you better. It depends on your setup, your budget, and how fussy you are about receiver noise. ## Common mistakes when buying a CB radio power supply The most common mistake is choosing by price alone. A bargain supply can look fine on paper, but if it produces interference or struggles under load, it stops being a bargain very quickly. CB is one of those hobbies where a cheap weak link can spoil the rest of the kit. Another mistake is confusing peak current with continuous current. Some supplies are marketed with a high peak figure that sounds impressive, but the continuous rating is the one that really matters for normal use. If you only look at the bigger number, you may end up with less usable capacity than expected. Plug compatibility catches people out as well. Some radios are supplied with a fused power lead for direct battery connection, and for home use you may need suitable terminals or connectors to make a safe, tidy link to the supply. It is not difficult, but it should be planned rather than improvised. Ventilation is often overlooked. Power supplies generate heat, especially if they are working near their limit. Cramming one into a tight shelf space with poor airflow is asking for trouble. A little space around the unit makes a difference. ## Setting it up properly at home A base station installation does not need to be complicated, but it should be neat and sensible. Keep the power supply on a stable surface, allow ventilation, and avoid running its cables in a tangled mess with antenna coax and other mains leads if you can help it. Good cable routing will not perform miracles, but it can reduce the chance of noise and make fault-finding easier later. Check polarity before connecting the radio. Positive to positive, negative to negative, with the correct fuse in place. It sounds obvious, but rushed setups are where expensive mistakes happen. If you hear noise after installation, do not assume the supply is automatically at fault. Nearby LED lighting, battery chargers, solar equipment, routers, and other household electronics can all contribute interference. The sensible approach is to isolate the problem step by step. Turn items off, listen for changes, and work methodically. A specialist retailer such as CB Radio UK can usually help point you in the right direction if the setup is proving awkward. ## Should you use a battery charger instead? In most cases, no. A battery charger is not the same thing as a proper radio power supply. Some chargers produce a rough output that is unsuitable for directly powering radio equipment, and they are not designed with receiver noise in mind. You might get away with it in a very temporary situation, but it is not the right long-term answer. A leisure battery setup is a different matter. Some users power a home CB from a battery that is then maintained separately, and that can work well. Even then, the arrangement needs to be thought through properly, especially around charging, ventilation, and fusing. For most people who simply want reliable mains operation in the house or garage, a dedicated CB power supply is the cleaner solution. ## Choosing for now and for later If you are buying your first homebase setup, there is no need to overcomplicate it. Start with a regulated supply from a known radio specialist, make sure it comfortably covers your radio’s current draw, and avoid the temptation to save a few pounds on an unknown unit. If you already know you may upgrade later, it can make sense to buy a little extra capacity now. That said, there is no point buying far beyond your needs just for the sake of it. The best choice is usually the one that suits your current radio well, gives sensible headroom, and comes from a supplier that understands radio equipment rather than treating it as just another generic electrical item. A good CB station is built from sensible choices rather than flashy ones. [The aerial](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/) gets most of the attention, and rightly so, but the power supply sits underneath the whole setup. Choose one that is stable, quiet, and correctly rated, and the rest of your equipment has a much better chance of showing what it can really do. If you are unsure, ask before you buy – it is far easier to match the right supply at the start than to chase faults after the radio is already on the bench. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-power-supply-what-to-choose/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-power-supply-what-to-choose/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-power-supply-what-to-choose/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-power-supply-what-to-choose/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Power%20Supply%3A%20What%20to%20Choose&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-power-supply-what-to-choose%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-power-supply-what-to-choose/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-power-supply-what-to-choose/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-power-supply-what-to-choose/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio Equipment for UK Drivers and 4x4s](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/) **Published:** June 3, 2026 **Author:** **Excerpt:** Find the right CB radio equipment for UK drivers, 4x4s and homebase use, from radios and aerials to mics, speakers and power supplies. **Content:** You usually find out whether your CB setup is right when the ground gets rough, the convoy stretches out, or mobile signal disappears. That is where good CB radio equipment earns its keep. For UK drivers, off-road groups, rural users and hobbyists, the difference between a decent setup and a frustrating one often comes down to choosing the right radio, aerial and accessories for the job rather than simply buying the biggest box. CB remains popular because it is practical. It gives you short-range communication without relying on a mobile network, and it suits everything from green laning and pay-and-play sites to road runs, farm use and homebase chatting. The key is matching the equipment to how and where you actually use it. ## What counts as CB radio equipment? At the centre of any setup is the radio itself, but that is only one part of the picture. CB radio equipment also includes the aerial or antenna, mounting hardware, microphones, extension speakers, power supplies, connectors, coaxial cable and, in some cases, extras such as SWR meters or linear amplifiers. If one part is poor, the whole system suffers. That is why [starter kits](https://cbradio.co.uk/what-to-expect-in-a-cb-radio-starter-kit/) appeal to many first-time buyers. They take the guesswork out of pairing a radio with a suitable aerial and the basic fittings needed to get on air. For experienced users, buying parts separately makes more sense because they may already know the exact radio format, aerial length or mounting style they want. ## Choosing the right CB radio equipment for your use The first question is simple. Is the radio going in a vehicle, staying in a shed or workshop, or being used as a homebase station? The answer changes everything from power requirements to aerial choice. ### Mobile setups for cars, vans and lorries For everyday road use, compact radios are often the best fit. Space behind the dash is limited in many modern vehicles, and a neat unit with clear controls is usually more useful than a feature-heavy set that is awkward to mount. If you drive a van or lorry, speaker volume matters as much as size because cab noise can drown out weaker signals. A mobile install also lives or dies by the aerial. A top radio paired with a poor antenna will underperform every time. Short aerials are tidy and practical in height-restricted areas, but they tend to give away some performance compared with a well-installed longer whip. That is the trade-off. If you spend most of your time in multi-storey car parks or around low branches, a shorter aerial may be the sensible option. If range matters more, longer is usually better. ### 4×4 and off-road installations Off-road users tend to need equipment that can take vibration, mud, weather and awkward mounting positions. Aerial flexibility is important here. A rigid whip may work well on the road but can become a nuisance on wooded lanes or rough ground. Spring bases and sturdier mounts are often worth having, especially on vehicles that see regular green lane use. For convoy work, reliability matters more than flashy specifications. You want a radio that is easy to operate with muddy hands or gloves, an aerial that stays put, and audio that remains clear when engines, tyres and terrain all add noise. This is why many experienced 4×4 owners keep things straightforward. Simple controls, dependable mounting and proper tuning beat gimmicks. ### Homebase and workshop use If your CB is staying put, you have more flexibility. A larger radio, mains power supply and external antenna can give a stronger, more comfortable setup than a small mobile unit on a bench. Homebase users often benefit from better microphones, extension speakers and a properly sited antenna rather than chasing extra output power. Placement matters. Even a good base setup will disappoint if the antenna is badly positioned or fed with poor coax. In many cases, careful installation gives more real-world improvement than spending extra on the radio body itself. ## Radios, aerials and why the aerial matters most Many buyers focus first on the radio because it is the visible part of the system. In practice, the aerial deserves at least as much thought. It affects transmit and receive performance so heavily that it can make an average set feel excellent or make a good set feel weak. A magnetic mount aerial is popular because it is quick to fit and remove. For casual users or those who do not want to drill bodywork, it is a sensible route. The downside is that mag mounts are not always ideal for hard off-road use, higher speeds in exposed conditions or long-term permanent installs. A body mount is usually the sturdier option if you want a more fixed installation. Tuning is not optional. An [SWR check](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/) helps make sure the aerial is working properly with the radio and vehicle. Skip this step and you risk poor performance or, in some cases, unnecessary strain on the radio. It is one of the most overlooked parts of buying CB radio equipment, especially among first-time users. ## Accessories that make a real difference Not every add-on is essential, but some accessories are more than nice to have. A decent [extension speaker](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/) can transform usability in a noisy cab. If your vehicle is diesel, lifted, fitted with mud terrains or simply loud at speed, improved audio clarity is often money well spent. Microphones are another area where user preference matters. A standard hand mic is fine for most people, but some drivers prefer an upgrade for better audio or a different feel in the hand. If you are replacing a microphone, wiring compatibility matters. Getting that wrong can cause no end of confusion, which is why proper wiring information is useful. Power supplies are relevant for bench testing and homebase stations. Choose one with suitable current capacity for the radio you are running. Go too small and you invite unstable performance. Go much larger than needed and you may simply be spending extra without benefit. Connectors and coax deserve more respect than they usually get. A poor connector, damaged cable or badly fitted plug can introduce faults that look like radio problems. Often they are installation problems. ## New to CB? Keep it simple If you are buying your first setup, resist the urge to overcomplicate it. A straightforward legal UK CB radio, a matched aerial, the correct mount and a few fitting basics are enough to get started properly. You can always upgrade later once you know what you want more of – more range, better audio, a tidier install or extra flexibility between vehicles. Starter kits work well because they remove some of the uncertainty. They are especially useful for drivers who want a sensible package without spending hours comparing every connector and bracket. That said, not all kits suit every vehicle. A small hatchback, a Defender, a pickup and a lorry cab all have different mounting realities. ## Experienced users tend to buy differently People replacing or upgrading existing CB radio equipment usually shop with a specific weak point in mind. It may be an aerial that snags too often, a radio that is hard to hear, or a microphone that has seen better days. That is a better way to upgrade than changing everything at once for the sake of it. Some users want multimode capability or more specialist kit. Others are looking at amplifiers, scanners or network radio products alongside their CB setup. That is where specialist retailers earn their place. General electronics sellers rarely offer the depth, compatibility advice or supporting information that radio users often need when mixing older and newer equipment. ## What to check before you buy Before ordering, think about where the radio will sit, how the aerial will mount, what power source you are using and how noisy the vehicle is in use. Also consider whether you need a removable setup or a fixed one. These are practical questions, but they prevent most of the common buying mistakes. If you are unsure, ask. A specialist supplier such as CB Radio UK can often save you time and expense simply by steering you away from a poor match. That is particularly useful if you are fitting out a 4×4, replacing older gear or trying to build a homebase station from scratch. The best CB setup is not always the most expensive one. It is the one that fits your vehicle, your terrain and the way you actually talk on air. Get those basics right and the equipment becomes something you rely on rather than something you keep meaning to fix. Whether you are heading onto the lanes, covering miles on the road or setting up in the workshop, buy with the job in mind and you will get far more from your radio from day one. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Equipment%20for%20UK%20Drivers%20and%204x4s&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-equipment-uk-drivers-4x4s%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-equipment-uk-drivers-4x4s/?share=telegram) - **Categories:** Uncategorised --- ### [How to Mount CB Aerial the Right Way](https://cbradio.co.uk/how-to-mount-cb-aerial/) **Published:** June 1, 2026 **Author:** **Excerpt:** Learn how to mount CB aerial setups properly for better SWR, range and reliability. Practical fitting advice for 4x4s, vans, lorries and cars. **Content:** A CB that sounds poor on the road is often blamed on the radio. More often, the real culprit is the aerial installation. If you want to know how to mount CB aerial systems properly, start with this: the mount position, the earth, and the cable route matter just as much as the aerial itself. A good installation gives you lower SWR, more consistent range and fewer headaches later. A bad one might still work, but it will usually work badly. That is why it pays to fit the aerial once and fit it properly. ## Why the mounting position matters Your aerial is not just a stick bolted to the vehicle. It is part of the whole system, and the vehicle body affects how it performs. In simple terms, the aerial needs a sensible mounting point and, in many cases, a decent metal ground plane to work efficiently. The ideal place on most vehicles is as high and as clear as possible. Roof centre is usually best for all-round performance because it gives the signal a more even radiation pattern. On a car or van, that often means a roof mount. On a 4×4 with roof racks, light bars or a snorkel, things get a bit more complicated, because the best theoretical position is not always the most practical one. If the aerial has to go on a wing, gutter, mirror arm or rear bracket, it can still work very well, but expect some compromise. A side-mounted aerial often performs better in some directions than others. For green laning, farm use or convoy driving, that may be perfectly acceptable. It depends how and where you use the set. ## How to mount CB aerial on different vehicles There is no single answer that suits every installation. A Defender used off-road, a lorry doing motorway miles and a family 4×4 used at weekends all have different needs. ### Cars and vans For cars and standard vans, a magnetic roof mount is the quickest option and often works surprisingly well. It is easy to fit, easy to remove and useful if you do not want to drill the bodywork. The trade-off is that it is less secure, the cable usually has to pass through a door or tailgate, and the mount can move if neglected or used in rough conditions. A fixed roof mount is neater and usually gives the best long-term result. It provides a solid mounting point and a proper earth through the bodywork, assuming it is fitted correctly. If you are after reliable performance rather than a temporary setup, this is normally the better route. ### 4x4s and off-road vehicles On 4x4s, durability matters as much as outright range. A long aerial on the roof might perform well, but it may not survive trees, low branches or a multi-storey barrier. That is why many off-road users choose wing mounts, bonnet channel mounts, gutter mounts or rear body brackets with a spring at the base. This setup can be very effective, especially with a tough whip aerial, but the bracket must be solid. A flimsy mount on rough ground will flex, loosen and eventually cause poor contact or cable failure. If the vehicle sees proper off-road use, build in strength from the start. ### Lorries and commercial vehicles Lorries often use mirror arm mounts or cab-side brackets because they are practical and accessible. These can work well, but the quality of the earth is critical. Painted brackets, powder-coated hardware and insulated mirror assemblies can all interfere with the earth path. A mount that looks secure is not always electrically sound. ## Choosing the right mount before you fit it Before drilling anything, make sure the mount suits the aerial and the vehicle. A heavy aerial needs a sturdier bracket than a short [starter aerial](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/). A large body-mounted whip puts more strain on the fixing point, especially at speed or in poor weather. You also need to think about connector type and cable routing. Some mounts come with pre-wired coax and a fitted plug, while others need the cable and connector assembling separately. There is nothing wrong with [either approach](https://cbradio.co.uk/product-category/plugs-and-connectors/), but plan it first. It is easier to drill one correct hole than to discover later that the cable, backing plate or connector will not fit where you want it. ## Fitting the mount properly The actual fitting needs care rather than brute force. Mark the position carefully, check behind the panel before drilling, and make sure the mount sits flat and tight. If the body panel is thin, use a reinforcement plate where appropriate. A weak panel can flex, and flex is never your friend in an aerial installation. Clean away paint only where needed for electrical contact, unless the mount is specifically designed to earth through its hardware. This is a common mistake. People assume tightening a bracket against painted metal is enough. It often is not. A poor earth can give you high SWR, patchy transmit performance and endless fault-finding later. Once the mount is fitted, weather protection matters. Use suitable sealing where required, especially on drilled roof mounts, and make sure any exposed connections are protected from water ingress. Water in coax is one of the quickest ways to ruin a perfectly good installation. ## Cable routing is part of how to mount CB aerial correctly Aerial cable should be routed neatly, protected from sharp edges and kept away from places where it will be crushed or repeatedly bent. Do not trap coax in a door shut if it is meant to be a permanent installation. It may work at first, but sooner or later the cable will suffer. Avoid coiling excess coax tightly into a little bundle behind the dash. If you have too much cable, it is better to route it in a longer run than to stuff it into a tight loop. Keep the run tidy and secure with sensible clips or ties, and leave enough movement where panels, seats or tailgates need to operate. If you are fitting a magnetic mount as a temporary setup, take a little extra care where the cable enters the vehicle. A badly pinched cable can create faults that look like radio or aerial problems when the real issue is simply damage to the coax. ## Earthing and ground plane This is where many installations go wrong. Most mobile CB aerials rely on a good earth and, effectively, the metal body of the vehicle acting as a counterpoise or ground plane. If the mount is isolated by paint, rubber, plastic trim or poor bracket design, performance will suffer. Some no-ground-plane aerial systems are available for vehicles where a conventional earth is difficult, but they must be matched properly and fitted as intended. They are not a shortcut for a badly installed standard aerial. On brackets and mirror mounts, an [earth strap](https://cbradio.co.uk/product-category/cb-radios-and-accessories/cb-radio-accessories/) can make a big difference. If you are getting inconsistent readings or poor performance from what looks like a decent install, the earth is one of the first things to check. ## Setting SWR after the aerial is mounted Mounting the aerial is only half the job. It must then be checked and adjusted with an SWR meter unless the manufacturer states otherwise. Running a CB with poor SWR is asking for trouble, and it will usually limit performance long before it damages anything. Take readings on the proper channels, follow the meter instructions carefully and adjust the aerial length in small increments. If the SWR stays high across the band, do not keep transmitting and hope for the best. That usually points to a mounting, earth or coax problem rather than simple aerial length. A well-mounted aerial should tune sensibly. If it will not, something in the installation needs another look. ## Common mistakes to avoid The usual problems are easy enough to spot once you know what to look for. Mounting too low, fitting next to roof racks or light bars, relying on painted contact surfaces, using a weak bracket, trapping the coax and skipping SWR checks are the big ones. Another common mistake is choosing the shortest aerial possible for convenience, then expecting top-end performance. Short aerials can be very handy, especially on 4x4s, but there is always a compromise. In general, a better-mounted medium aerial will outperform a poorly mounted long one, but length still matters. ## When practicality beats perfection The best CB installation on paper is not always the best one for real use. A roof-centre mount may be ideal for signal, but not if your vehicle lives under trees or needs to clear height barriers every day. A rear bracket on a 4×4 may be less than perfect electrically, yet far better in practice because it survives the sort of use that destroys a roof setup. That is the key point. The right way to mount a CB aerial is the way that gives you dependable performance for your vehicle and your usage, not just the best result in a textbook. If you are unsure, it is worth getting advice before you start drilling. A proper mount, the right aerial and a clean install will save a lot of fiddling later. If you want your CB to work well when it matters, treat the aerial fitting as part of the system rather than an afterthought. That is where the real performance comes from. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-mount-cb-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-mount-cb-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-mount-cb-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-mount-cb-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Mount%20CB%20Aerial%20the%20Right%20Way&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-mount-cb-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-mount-cb-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-mount-cb-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-mount-cb-aerial/?share=telegram) - **Categories:** Uncategorised --- ### [How to Reduce CB Interference Properly](https://cbradio.co.uk/how-to-reduce-cb-interference/) **Published:** May 30, 2026 **Author:** **Excerpt:** Learn how to reduce CB interference with practical fixes for vehicle and base setups, from aerial placement to power noise and SWR checks. **Content:** That sharp buzz through the speaker when you rev the engine, the hash from LED lights, or the constant background noise that wipes out weak signals – that is usually what people mean when they ask how to reduce CB interference. The good news is that most interference problems can be improved, and quite a few can be fixed completely. The trick is not guessing. You need to work out where the noise is coming from, because ignition noise, poor earthing, cheap accessories and a badly set-up aerial can all sound similar at first. For CB users in 4x4s, pickups, vans and homebase setups, interference is rarely down to one single fault. It is usually a combination of installation choices, vehicle electronics and surrounding equipment. If you want cleaner receive and a setup that performs properly, start with the basics and work through the system logically. ## How to reduce CB interference without chasing the wrong fix The first job is to identify whether the interference is coming through the power supply, being picked up by the aerial, or being generated inside the radio installation itself. A simple test helps. Turn the radio on with the engine off. If it sounds quiet, then start the engine. If the noise appears or rises with engine speed, you are likely dealing with electrical noise from the vehicle, often alternator or ignition related. If the noise is there even with the engine off, switch off accessories one by one. LED light bars, mobile phone chargers, dash cams, refrigeration units, inverters and cheap USB adapters are common culprits. On homebase setups, broadband routers, televisions, switch-mode power supplies and solar gear can all add noise. The point is straightforward – before buying extra filters, find the source. It is also worth checking whether the problem only affects receive. Many users blame interference when the bigger issue is a poor aerial system that cannot hear properly in the first place. A weak installation makes normal background noise seem far worse than it is. ## Start with the aerial system A CB radio is only as good as its aerial installation. If the aerial is poorly mounted, badly earthed or mismatched, you will struggle with performance and often assume interference is to blame. On a vehicle, the mount needs a proper earth where required, especially for body-mounted aerials. Rust, paint and powder coating can interrupt the earth path. Magnet mounts are convenient, but they are sometimes a compromise compared with a [solid fixed mount](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/), particularly on vehicles with awkward body shapes or lots of added accessories. That does not mean a mag mount is wrong for every user, but if you are chasing the cleanest and most consistent performance, a well-installed fixed mount often wins. Aerial position matters as well. Mounting too close to roof racks, light bars, snorkels or other metalwork can affect both performance and noise pickup. If you run off-road gear, there is always a balance between practicality and ideal placement. Sometimes the best mounting point on paper is not realistic in the real world. Even so, getting the aerial as clear as possible usually helps. Then there is SWR. If the aerial is not tuned properly, the radio may still work, but not well. You can end up with weaker received signals and poor transmitted range. That often gets mistaken for an interference issue. Checking and [correcting SWR](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/) is one of the most worthwhile jobs on any CB installation. ### Poor coax can make things worse Do not overlook the [coax and connectors](https://cbradio.co.uk/product/rg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler/). Crushed cable, water ingress, poor PL-259 fitting and cheap patch leads can all introduce problems. Route coax sensibly and avoid tight bends, trapped sections and unnecessary joins. If the cable has been pinched in a door or tailgate, replace it rather than hoping for the best. ## Power supply noise in vehicles If the interference changes with engine speed, look hard at the power side. Many mobile CB problems come from the radio being fed from a noisy supply point. The best starting point is direct wiring to the battery with suitable fusing, rather than picking up power from existing accessory circuits. Shared feeds often carry noise from other devices, especially on modern vehicles loaded with electronics. A direct battery connection does not cure every case, but it eliminates a common source of trouble. Earthing is just as important. A poor earth can cause all sorts of odd behaviour, from noise to unstable operation. Use a clean, solid earth point if your setup requires one, and make sure connections are tight and free from corrosion. On off-road vehicles that see mud, water and vibration, connections that looked fine when fitted can degrade over time. Alternator whine is another familiar problem. If the pitch rises with revs, that is a strong clue. Before adding a filter, check the basics – battery condition, earth straps, charging system health and wiring routes. Filters can help, but they work best when the underlying installation is already sound. A filter should be the final tidy-up, not the first guess. ## How to reduce CB interference from accessories and add-ons Modern vehicles are full of electrical accessories, and some are very noisy. LED light bars, work lamps, heated seat kits, tyre compressors, mobile phone chargers and camera systems can all inject rubbish into the power line or radiate noise that the aerial picks up. A quick test is to run the radio while switching each accessory on and off. If one item clearly triggers the noise, you have found your suspect. In some cases, moving the accessory wiring, improving its earth or replacing a cheap power converter solves it. In other cases, the accessory itself is simply poor quality and noisy by design. LEDs are especially common offenders. Better quality units tend to be better suppressed, while bargain units can be dreadful. The same goes for USB chargers and 12V adapters. They are cheap to buy, but some create a huge amount of hash across the band. If you use a lot of aftermarket gear in a 4×4 or work vehicle, cable routing becomes more important. Keep radio power and coax away from noisy wiring where possible. You do not need to overcomplicate it, but bundling everything together behind the dash is asking for trouble. ## Base station interference at home Home setups have their own problems. If your CB sounds noisy indoors, the issue may have nothing to do with the radio itself. Routers, televisions, laptop chargers, LED bulbs and solar inverters are all known to create interference. The useful test here is to switch household items off one at a time. If the noise floor drops, you know where to focus. A linear power supply can be quieter than a poor switch-mode unit, but that depends on what you are currently using. Likewise, moving the aerial further away from the house can make a noticeable difference, especially if it is currently close to wiring, electronics or solar equipment. There is always a trade-off at home between convenience and performance. A quick loft or wall-mounted setup may be easy to live with, but a better-sited aerial outside and clear of electrical clutter will usually perform better. ## Suppressors, filters and ferrites This is the part many people jump to first. Suppressors and ferrites can help, but they are not magic. If the aerial installation is poor or the radio is fed from a bad power source, clipping ferrites onto random cables will not transform it. Used properly, though, they are useful. Ferrite chokes on noisy accessory cables can reduce interference. Power line filters can help with alternator noise or hash on the supply. Suppressed ignition components may be needed on older vehicles where ignition noise is the main issue. It depends on the fault. If the noise is being radiated directly from a cheap LED driver and picked up by the aerial, filtering the radio supply alone may do very little. If the noise is riding in on the positive and negative power leads, a suitable filter stands a better chance. ## When the radio is not the problem Sometimes users replace the radio when the fault is elsewhere. In fairness, radios can develop faults, and some budget units handle noisy environments better than others, but the installation is more often the root cause. Before changing equipment, check the aerial, mount, earth, coax, power feed and nearby accessories. Try the radio in another vehicle or on a different power source if you can. That gives you a much clearer idea of whether the set is actually at fault. For anyone building or upgrading a setup, this is where specialist support pays off. A proper CB retailer such as CB Radio UK can usually help narrow down the likely cause far faster than trial and error. ## A practical way to fix it If you want the shortest route to a quieter CB, do it in this order: check aerial mounting and SWR, inspect coax and connectors, wire direct to the battery if mobile, test with accessories turned off, and only then look at filters or suppression parts. That order matters because it stops you masking symptoms while leaving the main fault in place. Interference can be stubborn, especially on heavily equipped vehicles or modern homes full of electronics, but most setups can be improved with a bit of method. Start with what you can prove, change one thing at a time, and your CB will usually tell you very quickly when you are heading in the right direction. A quiet radio is not just more pleasant to listen to – it means you are actually hearing the signals you paid for your kit to receive. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-reduce-cb-interference/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-reduce-cb-interference/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-reduce-cb-interference/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-reduce-cb-interference/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Reduce%20CB%20Interference%20Properly&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-reduce-cb-interference%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-reduce-cb-interference/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-reduce-cb-interference/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-reduce-cb-interference/?share=telegram) - **Categories:** Uncategorised --- ### [Mobile CB Aerial Buying Guide for UK Drivers](https://cbradio.co.uk/mobile-cb-aerial-buying-guide-uk-drivers/) **Published:** May 28, 2026 **Author:** **Excerpt:** Mobile CB aerial buying guide for UK drivers. Learn how to choose the right length, mount, tuning setup and build quality for better range. **Content:** A CB setup can be let down by one bad choice, and it is rarely the radio. More often, it is the aerial. If you are looking for a mobile CB aerial buying guide that cuts through the usual vague advice, start here: your aerial choice affects range, clarity, durability and how easy the whole installation is to live with day to day. For a 4×4, pick-up, van or daily driver, there is no single best aerial for everyone. It depends on the vehicle, where you mount it, how much height you can get away with, and whether you want maximum performance or something that stays out of the way. That is where buyers usually go wrong – they buy for looks, or for a headline length figure, and ignore the practical side. ## What matters most when choosing a mobile CB aerial The first thing to understand is simple: in most cases, a longer aerial will outperform a shorter one. That does not mean you should automatically fit the tallest whip you can find. Aerial length improves efficiency, but only if the aerial is properly mounted and suited to the way the vehicle is used. A long whip on a green-laning 4×4 may give excellent results, but if it is constantly hitting branches, flexing against a roof rack, or being removed every other day, it may not be the right buy. On the other hand, a very short aerial can look tidy and clear low barriers, but you will usually trade away some range and signal quality. For most mobile users, the decision sits between convenience and performance. If you mainly want car-to-car chat on runs, convoys or local roads, a compact aerial may be perfectly fine. If you want the best possible transmit and receive performance from a legal mobile setup, a longer, well-positioned aerial is usually the stronger choice. ## Mobile CB aerial buying guide: start with your vehicle Vehicle type changes the job completely. A saloon car, a Defender with a roof rack, and a panel van do not behave the same way when it comes to mounting and grounding. On a standard car, you may be limited by height, aesthetics and available mounting points. A [magnetic mount](https://cbradio.co.uk/product/sirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount/) can be a practical option if you want a temporary setup or do not want to drill. It is quick to fit, easy to remove and often suits occasional users. The trade-off is that mag mounts are less permanent, the cable routing can be untidy, and they can be vulnerable if left on at speed or in poor conditions without proper care. On a 4×4 or off-road vehicle, body-mounted brackets are often the better route. Gutter mounts, mirror mounts, rear body mounts and specialised brackets can give a more secure installation. They also tend to suit drivers who are regularly out in rough conditions and want a setup that stays put. The downside is that fitting can be more involved, and the mounting position matters a lot. Vans and lorries bring their own considerations. You often have good height to work with, but you also need to think about bridges, depots, tree cover and daily use. Aerials that look ideal on paper can become a nuisance if they constantly strike overhead obstructions. ## The best mounting position is not always the easiest one In pure performance terms, the higher and clearer the aerial sits, the better. Roof-centre mounting is often the benchmark because it gives a more even radiation pattern around the vehicle. Put simply, the signal spreads more evenly. In the real world, that is not always possible. Roof racks, sunroofs, vehicle shape, access issues and personal preference all get in the way. Many users mount on the rear of the vehicle or on a wing or mirror bracket instead. These positions can still work well, but they may produce a less even signal pattern, with the vehicle body affecting performance in certain directions. That does not make them wrong. It just means you should be realistic. A well-installed rear mount with a decent aerial is often far better than a poor roof setup, or a bargain aerial fitted badly. ## Short, mid-length or long whip? Short aerials are chosen for convenience. They are easier to live with in multi-storey car parks, tighter lanes and urban use. They are also less visually intrusive, which matters to some drivers. The compromise is performance. If you are expecting strong long-distance mobile results from a very short aerial, you are likely to be disappointed. Mid-length aerials are often the sweet spot for many UK users. They offer a sensible balance of range, durability and daily practicality. For mixed use – road, convoy work, occasional off-road trips and general hobby use – this is often where the value sits. [Long whips](https://cbradio.co.uk/product/stainless-steel-cb-aerial-antenna-xl-stinger-ss-orbitor-for-4x4-tractor-hgv/) are where performance tends to improve, especially when mounted well and tuned properly. They suit users who put communication first and are prepared to accept the extra height and movement. On open roads and rural ground, the difference can be worthwhile. In built-up areas or heavy woodland, the practical drawbacks can outweigh the gains. ## Build quality matters more than many buyers think Two aerials can look similar in a photo and perform very differently over time. The cheap option is not always poor, but weak springs, lower-grade fittings, thin cable and poor weather resistance often show up after a few months on the vehicle. If the aerial is going on a working van, off-road motor or regularly used 4×4, pay attention to the hardware. Stainless components, decent loading coils, solid mount construction and reliable coax are worth having. Water ingress, corrosion and loose fittings are common causes of poor performance and frustration. It is also worth thinking about replacement parts and compatibility. Some aerials are easier to service, re-mount or adapt than others. If you change vehicles or mounts later, a more standard fitting can save hassle. ## Don’t ignore tuning and SWR Aerial choice is only half the story. Even a very good mobile aerial will disappoint if it is not tuned correctly. That is where SWR comes in. Standing Wave Ratio, or SWR, tells you how well the aerial system is matched. If the SWR is too high, performance will suffer and you can put unnecessary strain on the radio. Many buyers assume a new aerial should work straight out of the box without adjustment. Sometimes you get close enough, but proper tuning is still the right approach. Some aerials are easier to adjust than others. That can matter if you are new to CB or fitting the system yourself. If you want a straightforward setup, look for an aerial and mount combination that does not turn tuning into a guessing game. Good installation, decent grounding where required, and sensible cable routing all play a part. ## Ground plane and no-ground-plane questions This is one area where people often get caught out. Many mobile CB aerials are designed to work with the vehicle body acting as part of the system, commonly referred to as the ground plane. Metal bodywork helps the aerial perform as intended. If you are fitting to a fibreglass panel, a non-metallic location, or an awkward mounting point, you may need to think more carefully about aerial type and mounting method. Not every aerial suits every vehicle body. This is especially relevant on some camper conversions, specialist off-road builds and vehicles with limited metal where you want to mount. There is no point buying an aerial based purely on length or price if the installation environment is wrong for it. ## What buyers get wrong most often The biggest mistake is buying too short because it looks neat, then expecting big performance. The second is buying too long without thinking about how the vehicle is actually used. After that, it is usually poor mounting, poor tuning, or assuming the coax and mount do not matter. Another common issue is treating the aerial as an accessory rather than the heart of the system. A modest radio with a properly chosen and tuned aerial will often outperform a more expensive radio paired with the wrong antenna setup. If you are buying as a beginner, keep it simple. Choose a proven mobile aerial from a specialist supplier, match it to a sensible mount for your vehicle, and leave room to tune it properly. If you already know your requirements, focus on build quality and mounting position rather than brochure claims. ## Which mobile CB aerial is right for you? If you want the shortest honest answer, it is this. For regular road use and easy living, go compact or mid-length. For mixed driving and better all-round performance, a mid-length aerial is often the safest bet. For maximum mobile performance, choose a longer aerial and accept the compromises that come with it. For off-road users, durability and mount security often matter as much as outright range. For [van and lorry drivers](https://cbradio.co.uk/best-cb-aerial-for-truck/), overhead clearance may be the deciding factor. For casual users, convenience may be worth more than squeezing out every last bit of performance. That is why a proper mobile CB aerial buying guide should not tell you there is one best model for everybody. It should help you avoid buying the wrong one for your vehicle and the way you actually use it. If you are unsure, buying from a specialist such as CB Radio UK usually saves time, money and a lot of trial and error. Get the aerial choice right and the rest of the setup becomes much easier to live with. Get it wrong, and even a good radio will spend most of its life underperforming. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/mobile-cb-aerial-buying-guide-uk-drivers/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/mobile-cb-aerial-buying-guide-uk-drivers/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/mobile-cb-aerial-buying-guide-uk-drivers/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/mobile-cb-aerial-buying-guide-uk-drivers/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mobile%20CB%20Aerial%20Buying%20Guide%20for%20UK%20Drivers&body=https%3A%2F%2Fcbradio.co.uk%2Fmobile-cb-aerial-buying-guide-uk-drivers%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/mobile-cb-aerial-buying-guide-uk-drivers/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/mobile-cb-aerial-buying-guide-uk-drivers/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/mobile-cb-aerial-buying-guide-uk-drivers/?share=telegram) - **Categories:** Uncategorised --- ### [Best CB Radio Starter Kits for UK Buyers](https://cbradio.co.uk/best-cb-radio-starter-kits-uk-buyers/) **Published:** May 26, 2026 **Author:** **Excerpt:** Find the best CB radio starter kits for UK drivers, 4x4 users and beginners, with clear advice on radios, aerials, mounts and what matters. **Content:** Buy the wrong kit and CB can feel disappointing from the first mile. Weak range, poor mounting, too much road noise, or an aerial that was chosen for price rather than performance will do that. The best CB radio starter kits avoid those problems by giving you a setup that actually works in the real world, whether that means a daily driver, a green lane lorry, a farm pickup or a homebase station. For most beginners, the kit matters more than the radio on its own. A decent transceiver paired with the wrong antenna will never perform as well as a modest radio with a properly matched aerial and sensible installation parts. That is why starter kits make sense. They remove some of the guesswork and get you closer to a reliable first setup. ## What makes the best CB radio starter kits? A proper starter kit should cover the essentials without padding the box with parts you will never use. At minimum, you want a legal UK CB radio, a suitable aerial, a mounting option that matches your vehicle or base setup, a power lead, and the basic hardware needed to get on air. If the kit includes coax, that is useful, but the length and connector type still need to suit the installation. The best kits are balanced. There is no point pairing a premium radio with a very poor antenna, and there is no point fitting a large high-gain aerial to a vehicle that cannot support it properly. For 4×4 users, the mounting method can be just as important as the radio itself. Aerials on off-road vehicles take knocks, flex more, and often need to work around roof racks, rear ladders and spare wheel carriers. Ease of use matters too. A first-time buyer is usually better off with a clear, simple radio that has straightforward controls for volume, squelch and channel selection. Extra features can be useful, but they are not always useful on day one. If you spend more time reading the manual than using the set, it is probably not the best starter option. ## Choosing a kit for how you actually use it The right kit depends on where and how you plan to use CB. A road car, an off-road lorry and a home station all ask different things from the equipment. ### Starter kits for cars and daily drivers If you want CB mainly for road trips, convoy driving or keeping in touch with other vehicles, compactness tends to matter. A slim radio is easier to mount neatly under a dash or in a modern cab with limited spare space. In this case, a medium-length antenna often makes more sense than the biggest whip you can find. You want a setup that performs well enough without becoming a nuisance in car parks or low barriers. Magnetic mounts can suit temporary installs, but they are not always the best answer for long-term use. They are quick and convenient, yet cable routing and paint protection need a bit of thought. A fixed body mount usually gives a tidier, more permanent result if you know the radio is staying put. ### Starter kits for 4×4 and off-road use Off-road users usually need something tougher. The radio should be easy to operate with gloves on or while bouncing about on rough ground, and the aerial setup needs to cope with branches, mud and regular vibration. This is where a spring base or [heavy-duty mount](https://cbradio.co.uk/product/3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip/) earns its keep. A lot of 4×4 owners are tempted by very long antennas for maximum range, but there is always a trade-off. Bigger aerials can perform well in open ground, yet they are more exposed and more awkward around trees, garages and roof-mounted gear. For many green lane and pay-and-play vehicles, a shorter, [more durable antenna](https://cbradio.co.uk/product/superflexi-48-super-flexible-cb-radio-aerial-mobile-antenna/) is the better starter choice, even if it gives away a little outright performance. ### Starter kits for homebase use Homebase beginners often focus too heavily on the radio and forget that antenna height and positioning will do most of the heavy lifting. A starter kit for indoor or base use should be built around a suitable base antenna, proper coax and a [power supply](https://cbradio.co.uk/product/sharman-50-amp-psu-switch-mode-power-supply-unit/) that matches the radio. If the plan is to start simple and upgrade later, it is worth choosing a radio that will still feel useful once the aerial system improves. ## The radio is only half the story A common mistake is to compare kits by radio brand alone. In practice, the antenna system often decides whether your first experience is clear and enjoyable or frustrating and short-lived. A shorter loaded antenna may be easier to live with on a vehicle, but a longer antenna usually gives better efficiency. That does not mean longer is always better. Mounting position, earth plane, bodywork, and cable routing all affect performance. A poor install can make a good antenna look bad. This is also why very cheap all-in-one bundles can disappoint. On paper they look like a bargain. In use, they often cut corners on the mount, coax or antenna quality, which are exactly the parts that should not be treated as an afterthought. ## Features worth having in a first kit Beginners do not need every extra, but some features are genuinely useful from the start. An S meter helps you judge signal strength. RF gain can be useful in busy areas. Automatic squelch sounds attractive, though many users still prefer to set squelch manually once they get the feel for it. A front-mounted microphone socket can make installation easier in tighter dashboards. A clear display matters if you are using the set at night or in poor weather. If the kit is for mixed UK and European use, channel compatibility should be checked before buying rather than assumed. For home users, an external speaker socket can be handy if the radio is tucked away in a noisier room or workshop. For vehicle users, a solid microphone and a sensible mounting bracket often matter more than novelty features. ## Best CB radio starter kits by budget Budget matters, but so does knowing where to spend it. At the entry level, a simple legal CB radio with a decent mid-range antenna and the correct mount is often enough to get started properly. That is ideal for beginners, occasional users and anyone testing whether CB suits their needs before investing more. In the middle of the market, you tend to get better build quality, stronger microphones, clearer displays and more reliable bundled accessories. This is often the sweet spot for regular road users and 4×4 owners who want dependable performance without going overboard. At the higher end, the gains are usually in durability, refinement and flexibility rather than dramatic leaps in local range. Better filtering, more solid controls and improved audio can make day-to-day use noticeably better, but only if the antenna side of the setup is also up to scratch. ## What to check before you buy Before choosing from the best CB radio starter kits, think about the practical side of fitting it. Where will the radio go? Where will the aerial mount without clashing with doors, roof racks or tailgates? How will the coax enter the cab? Does your vehicle have a clean power source available? It is also worth being realistic about your confidence level with installation. Some users are happy drilling mounts and routing cables through trims. Others want a quicker setup with fewer permanent changes. Neither approach is wrong, but the right kit for one buyer can be the wrong one for another. For UK buyers, legal compliance matters as well. Make sure the radio is suitable for legal UK CB use and that the kit components are matched accordingly. If you are unsure, specialist advice is worth far more than guessing and buying twice. ## Why specialist bundles usually work better There is a reason enthusiasts and working users often buy from specialist CB suppliers rather than generic electronics sellers. A proper specialist understands that a kit is not just a box of parts. The radio, aerial, mount and accessories need to make sense together. That is particularly true if you drive a 4×4, use a pickup for work, or want a homebase setup that can be expanded later. A specialist retailer such as CB Radio UK is more likely to offer sensible combinations, practical fitting advice and support if you need help with mic wiring, SWR or channel setup after purchase. ## Best CB radio starter kits are the ones you will actually use The best starter kit is not always the most expensive and it is not always the one with the longest feature list. It is the one that fits your vehicle, your budget and the way you use radio day to day. For some buyers that means a compact rig with a magnetic mount and a neat antenna. For others it means a tougher off-road setup with a spring base and a radio that can take a bit of abuse. If you are starting out, keep it simple but do not buy blindly. A sensible radio, a properly chosen aerial and the right mounting hardware will give you far better results than chasing headline specs. Get those basics right and CB becomes what it should be – straightforward, useful and a lot more enjoyable from the first call. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-radio-starter-kits-uk-buyers/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-radio-starter-kits-uk-buyers/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-radio-starter-kits-uk-buyers/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-radio-starter-kits-uk-buyers/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Best%20CB%20Radio%20Starter%20Kits%20for%20UK%20Buyers&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-radio-starter-kits-uk-buyers%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-radio-starter-kits-uk-buyers/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-radio-starter-kits-uk-buyers/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-radio-starter-kits-uk-buyers/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio vs PMR: Which One Suits You?](https://cbradio.co.uk/cb-radio-vs-pmr/) **Published:** May 24, 2026 **Author:** **Excerpt:** CB radio vs PMR - find out which suits 4x4 use, site work, convoys and everyday driving, with clear UK pros, limits and buying advice. **Content:** You only notice the difference between CB radio vs PMR when the group spreads out, the terrain turns awkward, or you need everyone on the same page without fiddling with mobile signal. On paper, both let you talk over short distances. In real use, they suit quite different jobs, and choosing the wrong one usually means frustration, weak coverage or a setup that does not match how you actually travel. For UK users, especially 4×4 owners, green laners, motorists and hobbyists, the question is not which is universally better. It is which one fits your vehicle, your group and the way you communicate. That is where CB and PMR start to separate quite quickly. ## CB radio vs PMR: the basic difference CB radio is built around vehicle or base-station communication. In most setups, you have a fixed radio, an external aerial and a proper power source. That gives CB a more serious feel from the outset, because it is designed to be installed and used as part of the vehicle or shack rather than clipped to a belt and forgotten about. PMR, usually meaning PMR446 in the UK, is the lightweight option. These are the small handheld walkie-talkies most people will have seen on campsites, building sites or family days out. They are easy to hand round, easy to charge and easy to use with almost no setup. That difference in format matters just as much as the radios themselves. A well-installed CB with a decent aerial is one thing. A pocket PMR set with a stubby built-in antenna is another. If you compare them fairly in real conditions, they are not aiming at exactly the same task. ## Where CB makes more sense CB comes into its own when you want dependable communication from vehicle to vehicle over practical distances, particularly in rural areas and off-road environments. A proper mobile CB installation can give you stronger, more consistent performance than a typical PMR handheld, especially once vehicles are no longer bumper to bumper. For convoy driving, pay and play days, overlanding, agricultural use and general road communication, CB remains popular because it is built for that kind of work. You can fit a suitable antenna to suit the vehicle, tune the setup properly and get a system that performs far better than an all-in-one handheld unit. That is why experienced users still stick with it. CB is also better suited to users who want expandability. You can choose different radios, microphones, extension speakers, mounts, power options and aerial lengths depending on how you travel. A [compact 4×4 install](https://cbradio.co.uk/product/anytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/) is different from a homebase setup, and CB gives you room to tailor the system rather than accepting a one-size-fits-all unit. The trade-off is obvious. It takes more effort. You need space in the vehicle, a power connection, an antenna and at least a basic understanding of installation. If you want the best from it, antenna choice and tuning are not optional extras. They are a big part of the result. ## Where PMR is the better fit PMR is all about convenience. If you want to open the box, charge the batteries and start talking, it is hard to argue with. For families, event marshals, light recreational use and situations where people are on foot as much as in vehicles, PMR is often the easier answer. That matters if your group is mixed. Not everyone wants a radio mounted in the dash or a whip aerial on the vehicle. PMR lets each person carry their own set, hand one to a passenger or keep a pair in the glovebox without making a project of it. For close-range work, PMR can be perfectly adequate. If you are spotting vehicles through obstacles, guiding someone while reversing a trailer, managing a campsite setup or keeping in touch around a site, the simplicity is the selling point. There is very little barrier to entry. Its limitation is performance once distance, terrain or vehicle bodywork start getting in the way. Hills, woodland, buildings and metal panels all make life harder for handheld units. Claimed range figures on the packaging are often optimistic. In open, ideal conditions they may look impressive. In the real world, especially in rough ground or built-up areas, results can drop off quickly. ## Range and signal: this is where most buyers get caught out If you are choosing between CB radio vs PMR based purely on advertised range, you are starting in the wrong place. Range is never just about the radio. It is about terrain, antenna efficiency, vehicle installation, surrounding interference and how the set is being used. A good CB with a properly matched aerial will usually give you the stronger real-world option for vehicle-based communication. That does not mean every CB setup automatically outperforms every PMR radio. A badly installed CB with a poor aerial location can disappoint. But when both are used as intended, CB generally has the edge for mobile-to-mobile use. PMR is more limited by design. The built-in antenna and low-power handheld format are part of what makes it convenient and licence-free to use, but they also place a ceiling on performance. For close groups, that may not matter. For spread-out convoys or undulating countryside, it often does. This is why off-road users often start with PMR and then move to CB once they have had a few days out where contact becomes patchy at the wrong moment. ## Installation, portability and cost PMR wins on simplicity and usually on upfront cost. A pair of handhelds can be cheaper than a proper CB setup, and there is almost nothing to install. If your use is occasional, that can be enough reason to choose it. CB asks for more commitment. The radio itself is only part of the setup. You may also need a mount, antenna, cable, power lead, SWR meter or tuning help, and possibly an external speaker depending on the vehicle. For many buyers that sounds like a downside, but it is also why the finished result is more capable. Portability is the reverse story. PMR is easy to carry and share. CB is not really portable unless you are talking about a handheld CB, and even then handheld CB has its own compromises compared with a fixed mobile set. Most serious users still favour a properly installed mobile unit. ## Ease of use on the move For drivers, a fixed CB can actually be easier to use than a handheld PMR once it is installed. The controls are where you expect them, the microphone is to hand and the [external speaker setup](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/) is often clearer in a noisy cab. In a 4×4, van or lorry, that practical usability matters more than people think. PMR can be straightforward, but handheld sets are easier to misplace, easier to run flat and sometimes awkward to hear in a noisy vehicle. They suit occasional use, passenger use and on-foot use very well. They are less ideal as a long-term main comms solution for regular drivers. ## Which one suits your kind of use? If you mostly want vehicle-to-vehicle communication for road runs, off-road trips, convoy travel or regular use in rural areas, CB is usually the smarter buy. It gives you a more capable setup and more room to improve performance with the [right aerial](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/) and installation. If you need simple short-range communication for occasional days out, family use, marshalling, spotting or keeping a small group connected on foot, PMR is often all you need. It is quick, accessible and low hassle. There is also a middle ground. Some groups use both. CB handles the main vehicle comms, while PMR is used for people outside the vehicle during recoveries, gate opening or guiding through technical sections. That is often the most practical answer rather than treating it as a straight winner-takes-all decision. ## CB radio vs PMR for 4×4 users For many 4×4 owners, the answer comes down to how often you go out and how far apart the group tends to get. If you are green laning a few times a year with close vehicle spacing, PMR may do the job. If you are regularly out in mixed terrain, running convoy routes or relying on comms as part of the day rather than a nice extra, CB is the more dependable tool. That is why specialist retailers still see strong demand for proper mobile radios, matched aerials and starter kits. The users who need reliable comms soon learn that setup quality counts. A radio is only as good as the way it is installed and the conditions it is being asked to work in. If you are unsure, buy for the job you expect six months from now, not the one you imagine for a single weekend. The cheaper option is not always the better value if it leaves you upgrading straight away. A good radio setup should make life easier, not give you something else to battle with. If your priority is convenience, PMR has a clear place. If your priority is stronger mobile performance and a setup built around the vehicle, CB still earns its keep. Got a question about what will suit your vehicle or the way you use it? It is always better to ask before you buy than to end up with a radio that was never right for the job. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-vs-pmr/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-vs-pmr/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-vs-pmr/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-vs-pmr/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20vs%20PMR%3A%20Which%20One%20Suits%20You%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-vs-pmr%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-vs-pmr/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-vs-pmr/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-vs-pmr/?share=telegram) - **Categories:** Uncategorised --- ### [Can I Use CB Legally in the UK?](https://cbradio.co.uk/can-i-use-cb-legally-uk/) **Published:** May 22, 2026 **Author:** **Excerpt:** Can I use CB legally in the UK? Yes, but the rules matter. Learn where CB is legal, what equipment to use, and what can cause problems. **Content:** You have fitted the radio, mounted the aerial, checked the SWR and now the obvious question comes up – can I use CB legally in the UK? The short answer is yes. CB radio is legal to use in the UK, but that does not mean every radio, every frequency or every way of using it is automatically acceptable. That is where people often get caught out. A proper UK-ready CB setup is straightforward enough, but imported sets, modified equipment and the wrong operating habits can turn a simple install into a legal headache. If you want dependable communication for the road, the lanes or the farm track, it pays to know where the line is. ## Can I use CB legally on UK roads and off road? For most users, yes. If you are using approved CB equipment on the legal UK and CEPT CB channels, CB radio can be used without needing an individual licence. That is one of the reasons it has stayed popular with 4×4 owners, motorists, agricultural users and hobbyists who want simple short-range comms without the complexity of amateur radio licensing. You can use CB in a vehicle, at home as a base station, or in off-road settings, provided the equipment itself is legal and used as intended. A convoy of 4x4s on green lanes, a pair of vehicles coordinating on a site, or drivers keeping in touch over short distances are all normal, lawful uses of CB. What matters is not just where you use it, but what you are transmitting on and with what equipment. A standard UK CB radio set up for legal channels is one thing. A radio that has been modified to go beyond legal frequencies or power limits is another. ## What makes a CB radio legal? A legal CB setup in the UK usually comes down to four basic points. The radio should operate on the permitted CB frequencies, use the permitted modes, stay within the allowed power limits and be the sort of equipment intended for legal CB use. In practical terms, that means buying a proper CB radio rather than assuming any radio with a microphone and channel selector is fine. This is especially relevant when people see multi-standard or export radios for sale online and assume they are all legal in exactly the same way. They are not. The UK allows the recognised CB bands and channel arrangements used for legal citizen band operation. Most mainstream [CB radios](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/) sold for the UK market are designed with this in mind, which removes a lot of guesswork. If a set is marketed clearly for UK CB use, that is generally a good sign. If it is described as export, expanded, modified or capable of extra bands outside standard CB use, treat it with caution. Power is another area where myths still do the rounds. More power is not automatically better, and it is certainly not automatically legal. For everyday users, staying with the legal output of a standard CB radio is the sensible route. Once people start talking about boosting output with additional equipment, the conversation often moves away from straightforward legal CB and into territory that needs much more care. ## The equipment that causes the most confusion The biggest source of confusion is the difference between legal CB radios and radios that can be altered or used outside legal CB allocations. A radio may look similar on the dash, but that does not mean it is legal in the same way. Standard AM/FM or multimode CB sets sold for the UK market are usually the safest option for normal users. By contrast, some imported sets are sold with expanded frequency coverage or can easily be modified. That does not automatically make them illegal to own, but using them outside permitted CB channels is where trouble starts. Linear amplifiers are another area worth mentioning. They are often discussed in enthusiast circles, and experienced users will know exactly what they do. But from a legal and practical point of view, they are not the answer for someone simply asking can I use CB legally. If your aim is legal everyday CB operation, stick to a proper radio, a well-matched aerial and a tidy installation. That will do far more for real-world performance than chasing questionable output power. Even the aerial matters. The aerial itself is not usually the legal issue, but a poor installation leads to poor performance, and poor performance often tempts people into trying unsuitable equipment. A properly tuned antenna, good grounding where required, decent coax and correct mounting position make a bigger difference than many newcomers expect. ## Can I use CB legally with a handheld or base station? Yes, provided the radio itself is legal for UK CB use and is operated within the permitted parameters. A [handheld CB](https://cbradio.co.uk/product/handheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu/) can be useful for short-range work around sites, events or convoy movement, though handheld performance is usually more limited than a vehicle-mounted set with a proper external aerial. A homebase CB setup is also legal when done properly. Plenty of users still enjoy base-station operation from home, workshop or unit. The same basic rule applies – legal CB radio, legal channels, legal power, sensible installation. The trade-off is performance and practicality. Mobile installs are ideal for vehicles and off-road use, while homebase setups can benefit from a better aerial position. Handhelds are convenient, but rarely give the same range or consistency as a well-installed mobile unit. ## Using CB while driving This is where legal use and sensible use need to meet in the middle. CB itself is legal, but using any device while driving must not distract you or compromise control of the vehicle. That means how the radio is mounted and how you operate it really matters. A secure mount, an external speaker if needed, and a microphone positioned so it is easy to grab without taking your eyes off the road all help. Many drivers have used CB for years without issue because the radio is set up properly and used with a bit of common sense. If your installation forces you to fumble with controls, stretch for the microphone or take too much attention away from driving, the problem is not just convenience. It becomes a safety issue. For working vehicles, 4x4s and daily drivers alike, a neat install is part of using CB responsibly. ## Common mistakes that put legal use at risk Most legal problems do not come from ordinary CB use. They usually start with assumptions. One is assuming all radios sold online are suitable for UK CB. Another is thinking a modified radio is fine as long as you use it carefully. A third is believing that extra output power is harmless if nobody complains. That is not a solid way to approach radio. Interference is another concern. If your setup causes interference because of poor installation, bad suppression or unsuitable equipment, that can bring unwanted attention very quickly. A clean install protects your own performance and keeps you on the right side of sensible operating practice. It is also worth remembering that legal does not always mean courteous. Clogging channels, using offensive language, or treating CB like a free-for-all does the hobby no favours. Good operating manners still matter. ## If you are asking can I use CB legally, start with the right kit The easiest way to stay legal is to begin with equipment intended for the UK market and suited to how you actually use your vehicle or station. If you are running a 4×4, a compact mobile set with a [properly matched aerial](https://cbradio.co.uk/product/mini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour/) usually makes more sense than chasing a complicated high-power setup. If you are installing at home, focus on antenna performance and correct configuration rather than gimmicks. This is where buying from a specialist helps. A proper CB supplier can tell you whether a radio is suitable for legal UK use, whether it fits your vehicle, what aerial suits your setup and what accessories are worth having. That is a far better route than guessing from a vague product description. At CB Radio UK, that practical side of the job matters just as much as the radio itself. If you want reliable legal CB, keep it simple. Buy the right radio, pair it with the right antenna, install it properly and use it with a bit of discipline. That way, you spend less time worrying about rules and more time getting the benefit CB was built for – straightforward communication when mobile phones are patchy, convoy movement gets spread out, or you just want dependable local contact. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/can-i-use-cb-legally-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/can-i-use-cb-legally-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/can-i-use-cb-legally-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/can-i-use-cb-legally-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Can%20I%20Use%20CB%20Legally%20in%20the%20UK%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fcan-i-use-cb-legally-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/can-i-use-cb-legally-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/can-i-use-cb-legally-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/can-i-use-cb-legally-uk/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio Now Illegal to Sell on eBay?](https://cbradio.co.uk/cb-radio-now-illegal-to-sell-on-ebay/) **Published:** May 21, 2026 **Author:** **Excerpt:** Is cb radio now illegal to sell on eBay? Here’s what UK buyers and sellers need to know about platform rules, legal kit, and safer options. **Content:** CB Radio Legality in the UK – eBay Policy Confusion Explained CB radios are fully legal and licence free in the UK under Ofcom regulations, yet compliant CB radio listings are increasingly being removed by eBay under an overly broad electronic equipment policy that does not accurately reflect UK law. CB radios operating around the legal 27 MHz band have been widely used across the UK for decades in transport, farming, off-road, and recreational applications. Despite this, many listings covering the 26.1–28 MHz range are currently being incorrectly flagged or removed from eBay, even when the equipment is completely legal for sale and use within the UK. This is not a legal issue under UK law — it appears to be a marketplace policy enforcement issue. CB radio equipment remains an important communication tool throughout the UK, particularly for: Truck drivers Farmers 4×4 users Rural communities Hobby and radio enthusiasts Removing legitimate CB radio equipment from online marketplaces creates confusion for both buyers and sellers and does not reflect current Ofcom regulations or real-world usage. If your compliant CB radio listing has been removed, sellers can contact eBay directly and request a manual review, clearly stating that UK CB radios are legal and licence free under Ofcom regulations. eBay Seller Support: https://www.ebay.co.uk/help/account/contacting-ebay-customer-service/contact-ebay?id=4379 Contact eBay Customer Service For customers looking to buy legal UK CB radio equipment without the confusion, browse our full range at: CB Radio UK Shop – https://www.cbradio.co.uk Popular categories include: Mobile CB Radios Handheld CB Radios CB Radio Starter Packs CB radios are legal, compliant, and still widely used throughout the UK. The current problem lies with inconsistent marketplace policy enforcement — not with the legality of CB radio equipment itself. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-now-illegal-to-sell-on-ebay/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-now-illegal-to-sell-on-ebay/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-now-illegal-to-sell-on-ebay/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-now-illegal-to-sell-on-ebay/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Now%20Illegal%20to%20Sell%20on%20eBay%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-now-illegal-to-sell-on-ebay%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-now-illegal-to-sell-on-ebay/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-now-illegal-to-sell-on-ebay/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-now-illegal-to-sell-on-ebay/?share=telegram) - **Categories:** Uncategorised --- ### [7 Best CB Radios for Lorries](https://cbradio.co.uk/best-cb-radios-for-lorries/) **Published:** May 20, 2026 **Author:** **Excerpt:** Looking for the best CB radios for lorries? Here are 7 solid options for UK drivers, plus what matters most for range, fit and daily use. **Content:** A CB radio that works well in a lorry cab has to do more than switch on and make noise. It needs to be easy to use on the move, clear enough to cut through road noise, compact enough to fit around modern dashboards, and reliable enough to put up with long hours, vibration and regular use. That is why choosing the best CB radios for lorries is less about flashy extras and more about getting the right set for the job. For most UK drivers, the right choice comes down to a few practical points. Cab space matters. Speaker volume matters. So does whether you want a simple legal UK FM setup or a more flexible multistandard radio for wider use. The aerial installation also plays a bigger part than many first-time buyers expect. A very good radio with a [poor aerial setup](https://cbradio.co.uk/best-cb-aerial-for-truck/) will still disappoint. ## What makes the best CB radios for lorries? In a lorry, usability comes first. Big buttons, a readable display and straightforward controls are far more useful than a long list of functions you never touch. If you are driving early starts, late finishes and mixed roads, you do not want to be buried in menus just to change channel or adjust squelch. Audio is the next big factor. Lorry cabs are not quiet places, and some radios simply have stronger, cleaner speaker output than others. If you regularly drive with the heater on, windows open or general cab noise in the background, weak audio gets tiring very quickly. An extension speaker can help, but starting with a radio known for decent sound is the better route. Then there is size. Some radios are full DIN-sized units, while others are compact enough to tuck into tighter spaces. In older lorries that may not matter much, but in modern cabs with [limited mounting options](https://cbradio.co.uk/product/din-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios/), compact dimensions can save a lot of hassle. Finally, think about how you actually use CB. Some drivers want a basic set for traffic chat, yard coordination and convoy work. Others want multiband or multistandard capability for more flexibility. Neither is automatically better. It depends on where you drive, what is legal for your use, and how much complexity you want day to day. ## 7 best CB radios for lorries in the UK ### 1. Midland 78 Plus Multi The Midland 78 Plus Multi has been a popular choice for years because it strikes a good balance between straightforward operation and useful flexibility. It is a solid option for drivers who want a proper mobile CB with a familiar layout and dependable performance. The controls are easy enough to learn, the front panel is clear, and it suits regular use rather than occasional weekend fitting. For lorry drivers covering long distances, that matters. It is not the smallest radio in the world, so you do need to think about where it will sit in the cab, but if you have the space, it remains one of the safer all-round bets. ### 2. President Barry II If you want something modern, compact and well finished, the President Barry II is hard to ignore. It is a good fit for drivers who need a smaller chassis without stepping down to a flimsy or stripped-out set. President radios are generally well regarded for build quality and clean audio, and the Barry II makes sense in cabs where mounting space is limited. The menu system is more modern than some older-style sets, which some drivers will like and others may find a bit less immediate. If you prefer a neater, newer unit with strong everyday usability, it is a strong contender. ### 3. Thunderpole T-X The Thunderpole T-X is aimed more at drivers who want a simple, no-fuss radio that covers the basics properly. It is not trying to be the most feature-packed unit on the shelf. That is part of its appeal. For many lorry users, especially those returning to CB after years away, a straightforward set with clear controls is exactly what is needed. If your priority is getting a reliable radio fitted and working without a steep learning curve, the T-X is worth a look. It is especially sensible if budget matters but you still want a recognised UK CB option. ### 4. President Teddy II ASC The Teddy II ASC suits drivers who want compact size and easy operation. Its automatic squelch system is one of the features that makes it appealing in daily use, particularly if you are tired of constant manual adjustment as conditions change. That said, automatic squelch is not a magic fix for every installation. A poor aerial setup will still cause headaches. But in a well-installed system, the Teddy II ASC can make life simpler, and its small size helps in tighter cabs where a larger unit would be awkward. ### 5. Midland M-Mini USB The Midland M-Mini USB is one of those radios that makes a lot of sense in modern vehicles. It is compact, neat and designed with limited space in mind. For drivers who do not want a bulky box hanging under the dash, that is a real advantage. The trade-off is that very compact radios can sometimes feel a bit fiddlier to operate if you have large hands or prefer widely spaced controls. That is not a fault so much as a design compromise. If your installation space is tight and you want a tidy fit, the M-Mini USB is a practical option. ### 6. CRT One N The CRT One N has built a following among users who want a small radio that still feels capable. It is compact enough for awkward mounting positions but generally offers more than the bare minimum. That makes it attractive for lorry cabs where space is limited but expectations are still high. It is a good example of a radio that suits drivers who already know roughly what they want. Not everyone needs it, but if you are after a compact set with a bit more flexibility than the most basic entry-level units, it can be a smart buy. ### 7. President McKinley At the more advanced end, the President McKinley is for users who want a more serious radio with stronger specification and a more substantial feel. It is not the one to choose if all you need is a basic set for occasional chatter. It comes into its own for experienced users who value the extra capability. For lorry use, the main question is whether you actually need what it offers. It is a bigger investment, and with that comes more radio than some drivers require. But if you want a premium-feeling unit and you know you will make use of its features, it is one of the better choices available. ## Best CB radios for lorries – what to match with them The radio is only half the setup. In many cases, the aerial matters more. A poor aerial choice, weak ground plane arrangement or [badly routed coax](https://cbradio.co.uk/what-is-swr-on-cb/) can make a good radio seem average. For lorries, aerial length, mounting position and durability all need proper thought. A mirror mount setup is common, but it has to be installed well. Roof mounting can perform very well where practical, though it is not always straightforward on commercial vehicles. If clearance is a concern, a shorter aerial may be easier to live with, but there is usually some compromise in performance compared with a longer whip. Microphone choice also affects day-to-day use. A standard mic is fine for most drivers, but if you are on the air a lot, a better quality microphone can improve both comfort and transmitted audio. The same goes for extension speakers. In a noisy cab, an external speaker mounted in the right place can make a noticeable difference. ## Which type of driver suits which radio? If you are new to CB or just want a simple setup for practical communication, radios such as the Thunderpole T-X or President Teddy II ASC make sense. They are easier to get on with and less likely to become overcomplicated. If you need a compact fit above all else, the Midland M-Mini USB, President Barry II and CRT One N are the obvious places to look. These are especially useful where modern cab layouts do not leave much room for a traditional chassis. If you are an experienced user and want more flexibility, the Midland 78 Plus Multi and President McKinley are stronger candidates. They ask a bit more of the user, but they can also offer more in return. There is no single answer for every lorry. A local delivery vehicle, an overnight long-haul cab and a show lorry with a carefully planned install may all need different things. That is why it helps to buy from a specialist supplier such as CB Radio UK, where the radio, aerial and fitting advice can all be considered together rather than as separate bits in a basket. ## Common mistakes when buying a CB for a lorry The most common mistake is buying on radio features alone and giving little thought to the aerial system. The second is choosing a unit that does not physically fit the cab well. A radio that is awkwardly mounted soon becomes annoying to use. Another mistake is assuming the cheapest option will do the job just because CB is simple. Sometimes that is true, especially for light use. But for a working lorry where the set may be used regularly, a better-built radio usually pays off in easier operation and longer service life. If you are unsure, keep it simple. Pick a radio with clear controls, pair it with a decent aerial, and make sure the installation is done properly. That usually gives better results than chasing extra features you may never use. The right CB in a lorry should feel like part of the vehicle, not an afterthought. Get that balance right, and every mile becomes that bit easier to work through. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-radios-for-lorries/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-radios-for-lorries/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-radios-for-lorries/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-radios-for-lorries/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%207%20Best%20CB%20Radios%20for%20Lorries&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-radios-for-lorries%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-radios-for-lorries/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-radios-for-lorries/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-radios-for-lorries/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio Channels Guide for UK Users](https://cbradio.co.uk/cb-radio-channels-guide-uk-users/) **Published:** May 18, 2026 **Author:** **Excerpt:** A practical cb radio channels guide for UK users, covering channel use, legal basics, etiquette, emergency use and how to choose the right setup. **Content:** You do not need all 40 channels at once. What you need is to know which ones people actually use, which ones to leave clear, and how to get the best from your setup without causing grief for other operators. That is where a proper cb radio channels guide helps, especially if you are new to CB or getting back on air after a few years away. CB is simple when the basics are clear. Each channel is just a shared frequency slot, and everyone tuned to that channel can hear the same conversation if they are within range. The practical side is what matters most – which channel your local group uses, where drivers tend to call, what to do when a channel is busy, and how your radio mode affects what you can hear. ## CB radio channels guide: what the channels actually are Most UK CB users are working within the familiar 40-channel block, with channels numbered rather than remembered by frequency. On a standard set, you turn the selector to move between them, and each one gives you a different shared space to listen or speak. There is nothing magical about a channel by itself. Its value comes from who is using it in your area. That is why channel choice is always part technical and part local habit. In one part of the country, a green lane group may meet on one channel. Somewhere else, local farmers, 4×4 users or hobbyists may prefer another. If you are travelling, especially in rural areas, it is common to scan or listen around before settling in. For beginners, the mistake is assuming every channel has a fixed national purpose. A few channels have common habits attached to them, but plenty are simply used by whoever agrees to use them. If you are heading out with a convoy, pick a quiet working channel before you set off and make sure everyone is on the same band and mode. ## The channels most UK users ask about Channel 19 is the best-known one and still the first place many drivers check. It has long been associated with road traffic, driver chat and general calling. In some areas it is lively. In others it can be very quiet. If you are on the motorway or A-roads and want to make contact, it is still worth a listen. Channel 9 is traditionally treated as an emergency or assistance channel. In reality, it is not monitored in the way many people assume, so it should not replace a mobile phone where signal is available, or proper emergency services contact. Even so, many operators still leave it clear out of good practice and respect for the old convention. Beyond those, local use matters more than tradition. Off-road groups often choose a dedicated working channel to keep convoy chatter away from busier calling channels. That makes sense. You want a channel where route instructions, recovery talk and hazard warnings can be heard clearly without outside interruptions. If you run events, laning trips or farm traffic, consistency helps more than picking a so-called perfect channel. Use the same agreed one each time, test radios before moving off, and make sure everyone understands whether they are using UK FM channels only or a radio capable of more than one standard. ## UK channels, CEPT channels and why it matters This is the part that catches people out. Not every CB radio covers the same channel sets, and not every user is operating in exactly the same mode. In the UK, many sets include the UK 27/81 channels as well as the CEPT mid-band channels. Radios are often described as multistandard or multimode for that reason. If one operator is on the UK band and another is on the EU or CEPT band, they can both think they are on the same channel number while actually listening on different frequencies. The result is silence, confusion, or hearing the wrong station entirely. Before blaming the aerial or the radio, check that everyone is using the same band and mode. FM is common and straightforward for everyday mobile use. Some radios also offer [AM or SSB](https://cbradio.co.uk/product/anytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio/), but that depends on the set and how you intend to use it. For simple group communication on the move, FM keeps things easy. If you want broader capability, especially for hobby use, a radio with additional modes may suit you better. The trade-off is that more functions can mean a steeper learning curve for a first-time buyer. ## How to choose the right channel in the real world The best channel is often the quietest usable one, not the most famous one. If your group is working a pay and play site, crossing green lanes or moving through forestry tracks, you want clear, low-interference communication. Pick a channel with little local traffic, confirm everyone can hear and reply, then stay there unless conditions force a change. Range matters too. CB is short-range radio, and performance depends heavily on aerial quality, [mounting position](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/), SWR setup, terrain and electrical noise. If your convoy is spread out over hills, woods or deep lanes, changing channel will not fix a poor installation. A [well-matched aerial](https://cbradio.co.uk/product/centre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna/) and tidy power setup will do more for usable communication than endlessly chasing a different channel number. There is also a difference between calling and working channels. You might call on a commonly used channel, make contact with another station, then agree to move to a quieter one for a proper chat. That is good practice and helps keep busy channels usable. ## CB radio channels guide to etiquette on air A decent channel stays decent because operators use a bit of common sense. Listen before transmitting. If people are already talking, wait for a gap. Keep messages clear and brief if you are using the radio for vehicle coordination. On convoy runs, say who you are calling and keep directions simple. If you get interference, stay calm and check the obvious things first. It may be local electrical noise, a nearby user on a stronger setup, or simply somebody on the same channel within range. Shouting into the mic will not improve any of it. Neither will winding the gain around without understanding what the controls do. Mic technique matters more than many new users realise. Speak across the microphone rather than blasting directly into it, use a normal voice, and leave a short pause after pressing the transmit button before you talk. That avoids clipped first words and makes your signal easier to understand. ## When channel problems are not really channel problems A lot of supposed channel issues come down to installation faults. If reception is weak across every channel, or your transmitted audio is poor, look at the aerial first. Poor grounding, a badly positioned mount, damaged coax or high SWR will all reduce performance. Mobile installs on 4x4s, pickups and plant vehicles can be especially sensitive if the vehicle has roof racks, light bars or awkward mounting points. Power supply noise is another common issue on modern vehicles. LED lighting, chargers and other accessories can introduce interference that sounds like a channel problem when it is really coming from your own setup. Sorting grounding, routing cables properly and using quality components usually gets better results than endlessly swapping radios. This is also where buying from a specialist helps. The right antenna length, mount type and accessory choice can make the difference between a radio that merely powers on and one that is genuinely useful on the road or off it. CB Radio UK sees this every day with customers building first kits, replacing tired gear or upgrading a basic mobile setup. ## A sensible starting point for new users If you are new to CB, keep it simple. Start with a legal, easy-to-use FM radio, a decent aerial matched to your vehicle or base location, and one agreed channel for your group. Learn the controls properly, check your installation, and spend time listening before you worry about advanced features. If you are a more experienced user, channel planning becomes part of getting the best from your equipment. You may want one channel for road use, another for site work, and a fallback if local interference appears. That is a practical way to run things, especially if different vehicles in the group have different antenna performance. A good cb radio channels guide is not really about memorising all 40 channels. It is about understanding how people use them, how your radio is set up, and how to stay clear and courteous on air. Get those parts right and CB remains what it has always been at its best – simple, dependable communication when you need it most. If you are unsure which radio, aerial or setup will suit your vehicle or the kind of channels you expect to use, it is worth asking before you buy rather than correcting the wrong kit later. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-channels-guide-uk-users/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-channels-guide-uk-users/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-channels-guide-uk-users/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-channels-guide-uk-users/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Channels%20Guide%20for%20UK%20Users&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-channels-guide-uk-users%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-channels-guide-uk-users/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-channels-guide-uk-users/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-channels-guide-uk-users/?share=telegram) - **Categories:** Uncategorised --- ### [How to Wire CB Microphone Correctly](https://cbradio.co.uk/how-to-wire-cb-microphone/) **Published:** May 16, 2026 **Author:** **Excerpt:** Learn how to wire CB microphone plugs correctly, identify pinouts, test continuity, and avoid common faults on UK CB radio setups. **Content:** A CB that keys up but gives no audio usually points to one place first – the microphone lead or plug. If you are looking up how to wire CB microphone connections, the job is usually less about complicated electronics and more about getting the right pinout, the right solder joints, and the right cable preparation for your specific radio. That last part matters. There is no single universal CB microphone wiring standard across every make and model. A 4-pin plug on one radio may not match a 4-pin plug on another, and the same goes for 5-pin and 6-pin setups. The plug might look right, but if the transmit, receive, audio and earth wires are on the wrong pins, the microphone will not behave properly. ## Before you wire a CB microphone Start by identifying three things: the radio make and model, the microphone type, and the plug type. That sounds obvious, but many wiring faults happen because someone assumes all 4-pin CB mics are interchangeable. They are not. Even within the same broad category, manufacturers have used different pin layouts. A standard CB microphone usually carries audio, earth, transmit switching and receive switching. Some models may also use extra pins for channel changing, up/down buttons or powered features. If you are rewiring a simple replacement mic, the job is fairly straightforward. If you are adapting a power mic or a channel-change mic to a different radio, it can get more particular. Before touching the soldering iron, inspect the microphone lead itself. If the cable is brittle, crushed, or repeatedly bent near the plug or strain relief, rewiring the plug alone may not solve it. In plenty of cases, the break is actually inside the cable rather than at the pin connection. ## Tools and parts you will need You do not need a full workshop, but you do need the right basics. A decent soldering iron with a fine tip, electrical solder, small side cutters, wire strippers, heat shrink if you have it, and [a multimeter](https://cbradio.co.uk/product-category/tools/) will make the job much easier. A helping hands stand is useful, though not essential. Use the correct [replacement plug](https://cbradio.co.uk/product-category/plugs-and-connectors/) for the radio. Forcing a generic plug onto the job often creates poor strain relief or awkward soldering points. If the microphone cable is damaged right back near the plug, trim it to good clean cable before you start. There is no point soldering damaged conductors onto fresh pins. ## How to wire CB microphone plugs properly The first rule is simple: get the [correct wiring diagram](https://cbradio.co.uk/cb-radio-manuals/) for that exact radio, or confirm the pinout by testing. Wire colours are not universal. On one microphone, red may be audio. On another, red may be transmit. Relying on colour alone is how people end up chasing faults for an hour. If you still have the old plug attached and it has not completely failed, note the pin positions before removing anything. A quick photo can save a lot of head-scratching later. If the old plug has already been cut off, you will need to identify each wire by function. ### Identifying the microphone wires Most CB microphone cables have a screened audio core plus additional switching wires. The screened braid or drain wire is commonly used as earth, but not always by itself. The inner core inside the screen often carries mic audio. The remaining wires usually handle push-to-talk switching between transmit and receive. A multimeter on continuity test is the best way to confirm what does what. Press and release the PTT switch while checking which wires connect together in receive and which connect in transmit. This tells you which conductors are being switched. The microphone insert itself can also be tested to identify the audio pair. This is where patience pays off. If you rush and guess, you may end up with a radio that stays stuck on transmit, receives but will not key up, or keys up with no modulation. ### Soldering the plug Slide the plug cover and any strain relief parts onto the cable before soldering. It sounds basic because it is, but everyone forgets it once. Tin the wire ends lightly, tin the plug pins if needed, and keep the joints neat and small. Too much solder can bridge adjacent pins, especially on tightly spaced CB plugs. Keep heat on the pin only as long as needed. Overheating can soften insulation or damage the plug insert. Once each wire is attached, check that no strands are loose and touching the next pin. A single stray strand can create an intermittent fault that only appears when you move the cable. If the plug has a clamp or cord grip, use it. The soldered pins should not be taking all the strain when the mic lead is pulled. In a 4×4, agricultural vehicle or working lorry cab, vibration and movement will quickly expose a poorly supported cable. ## Common CB microphone wiring faults When people search for how to wire CB microphone connections, they are often trying to fix one of a few familiar problems. The symptoms can tell you a lot. If the radio transmits permanently as soon as the mic is plugged in, the transmit and earth or switching lines may be wrongly connected. If it receives normally but will not transmit, the PTT switch line may be open circuit or on the wrong pin. If it keys up but nobody hears you, the mic audio line is usually at fault, or the microphone element itself has failed. A hum, buzz or weak audio can point to poor screening or a bad earth connection. Crackling when moving the lead often means a broken conductor inside the cable close to the plug or mic body. In that case, rewiring only the plug may give a temporary result at best. ## It depends on the radio and microphone Not every microphone conversion is worth doing blind. Some CB radios are very forgiving with basic dynamic mics, while others are fussier about impedance, switching arrangement or powered microphone compatibility. If you are fitting an aftermarket mic to an older radio, the pinout may be only part of the story. Power microphones add another variable because they may need a battery or internal amplifier circuit to be in good order before they perform properly. Channel up/down microphones can be even more model-specific. The plug may fit, but the extra functions may not work unless the radio supports them on the same pins. That is why direct wire-for-wire adaptation from one brand to another can be hit and miss. Sometimes it works perfectly. Sometimes you get transmit but no receive switching, or audio that is far too low. The details matter. ## Testing after wiring Once the plug is assembled, test it before putting everything back into regular use. Plug the microphone into the radio with the set powered on. Check that the radio stays in receive with the PTT released. Then press the PTT and confirm it switches cleanly to transmit. After that, do an audio test. If you have access to another nearby CB, ask for a radio check. If not, a meter or monitor function on suitable equipment can help confirm that the microphone is actually modulating and not just keying the carrier. There is no substitute for a real on-air audio check though. Move the cable gently near the plug while testing. If transmit drops in and out or audio crackles, remake the plug before the fault becomes a permanent nuisance. A bench test is useful, but in-vehicle movement is what usually reveals weak wiring. ## When rewiring is the right fix, and when it is not Sometimes the best repair is simply a new plug and a clean solder job. If the microphone is otherwise in good condition and the fault is clearly at the plug end, that is often all it needs. For many standard CB mics, this is a sensible and cost-effective fix. But there are times when replacing the whole microphone is the better option. If the lead is tired throughout, the PTT switch is worn, the mic insert is weak, and the casing has had a hard life, you can spend more time repairing than the microphone is worth. For regular off-road use or commercial driving, reliability matters more than squeezing one more patch repair out of a worn-out mic. If you are unsure on pinouts, compatibility or whether the fault is in the radio or the mic, getting proper advice saves time. A specialist supplier such as CB Radio UK will have seen the common wiring combinations and the awkward ones as well. ## A sensible approach to microphone wiring The cleanest way to wire a CB microphone is not to start with the soldering iron. Start with identification, confirm the pinout, test the wires, and only then make the connections. That approach is slower by ten minutes and faster by an afternoon. A neatly wired microphone plug gives you more than a tidy repair. It gives you reliable transmit and receive switching, cleaner audio, and one less fault to deal with when you are out on the road, in the field or halfway through a green lane weekend. If the wiring does not quite add up, stop and check it again – CB gear usually tells you what is wrong, as long as you listen carefully. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-wire-cb-microphone/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-wire-cb-microphone/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-wire-cb-microphone/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-wire-cb-microphone/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Wire%20CB%20Microphone%20Correctly&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-wire-cb-microphone%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-wire-cb-microphone/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-wire-cb-microphone/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-wire-cb-microphone/?share=telegram) - **Categories:** Uncategorised --- ### [What Is SWR on CB and Why It Matters](https://cbradio.co.uk/what-is-swr-on-cb/) **Published:** May 14, 2026 **Author:** **Excerpt:** What is SWR on CB? Learn what SWR means, why it matters, what causes high readings, and how to tune your aerial for better CB performance. **Content:** You can fit a decent CB, wire it neatly, mount the aerial properly, and still end up with poor performance if the SWR is wrong. If you have ever asked what is SWR on CB, the short answer is this: it is a measurement that shows how well your radio and aerial system are matched. That matters more than many new users realise. A poor match means some of your transmitted power is not leaving the aerial as it should. Instead, part of it is reflected back towards the radio. In real-world terms, that can mean shorter range, weaker transmit performance, and in bad cases unnecessary strain on the set. ## What is SWR on CB? SWR stands for Standing Wave Ratio. On a CB setup, it tells you how efficiently power is moving from the radio, through the coax, and out through the aerial. When everything is matched well, most of that power is radiated. When it is not, some of it comes back. You will usually see SWR shown as a ratio such as 1.1:1, 1.5:1, 2.0:1 and so on. The closer the figure is to 1:1, the better. In practical CB use, a reading around 1.5:1 or lower is generally considered good. A reading around 2:1 is a sign that the setup needs attention. Much above that, and you should stop transmitting until you sort it out. It is not about chasing a perfect number for the sake of it. Plenty of mobile installations work very well without being absolutely perfect. The aim is to get the system into a safe and efficient range, then make sure it stays there. ## Why SWR matters on a CB radio A CB aerial is not just a bit of metal bolted to the vehicle. It is part of a tuned system. The radio, coax, mount, earth plane and aerial length all affect how the setup behaves. When the SWR is too high, the first problem is wasted power. Your radio may be outputting normally, but less of that signal is actually being radiated. That can leave you wondering why others can hear nearby stations that you struggle to reach. The second issue is protection of the radio itself. Many modern CB sets have some degree of output protection, but that does not mean high SWR is harmless. Repeated transmitting into a badly mismatched aerial system can still cause trouble, especially on older sets or harder-used mobile rigs. For off-road users, green laners, 4×4 owners and anyone fitting a CB to a vehicle with roof racks, body accessories or awkward mounting positions, SWR matters even more. Aerial placement on a working vehicle is rarely perfect, so tuning becomes part of getting reliable results. ## How SWR works in simple terms Think of the radio as sending energy down the coax to the aerial. If the aerial system is the right electrical length and installed properly, it accepts that energy and radiates it. If something is off, part of the energy hits a mismatch and reflects back. That reflected energy creates the standing wave effect that SWR meters are measuring. You do not need to get buried in theory to make use of it. In day-to-day CB terms, SWR is simply your clue as to whether the aerial system is working with the radio or against it. This is why changing what seems like a small detail can alter your reading. Trim a whip, move the mount, improve the earth, change the spring, reroute the coax, or swap the aerial altogether, and the SWR can shift. ## What causes high SWR on CB? There is no single cause, which is why guessing often wastes time. The usual culprits are a poorly tuned aerial, a bad earth, a damaged coax lead, a [poor connector](https://cbradio.co.uk/product-category/plugs-and-connectors/), or an unsuitable mounting position. On mobile installations, the mount location is a common issue. An aerial fitted low down on a bumper or tucked beside bodywork may not perform as cleanly as one mounted higher up with more clear space around it. That does not mean every bumper mount is wrong, but it does mean compromise installations often need more care. Earthing is another big one. Some aerials and mounts rely on a proper ground plane through the vehicle body. If the mount is insulated by paint, powder coating, corrosion or poor contact, the SWR can climb. Fibreglass panels, roof bars and accessories can complicate matters further. Then there is the coax. Crushed cable, water ingress, poor PL plugs or cheap patchy leads can all affect readings. Sometimes the aerial gets blamed when the real problem is in the feed line. ## How to check SWR on a CB setup To measure SWR properly, you use an SWR meter inserted between the CB radio and the aerial lead. Some radios and aerial systems make this straightforward, but the basic process is the same: connect the meter, calibrate it as required, then take readings on different channels. On UK CB, people commonly check near the bottom and top of the band to see how the aerial is behaving across the range. If the SWR is lower on the lower channels and higher on the upper channels, that usually suggests the aerial is too long. If it is lower on the upper channels and higher on the lower channels, the aerial is usually too short. That pattern matters because tuning is not random. You are using the meter reading to decide which direction to adjust. Small changes are best. Take too much off a whip in one go and you can turn a simple tune into a replacement job. ## What is a good SWR reading? For most CB users, anything close to 1:1 is excellent, around 1.5:1 is very respectable, and up to around 2:1 is the point where you want to start correcting things. There is some tolerance in the real world because vehicle installs are not test-bench conditions. A working 4×4 with spot lamps, roof gear, body accessories and a practical rather than perfect aerial location may never read exactly like an ideal roof-centre mount. That is normal. What matters is getting a safe, sensible reading and dependable performance. If you see very high SWR, such as 3:1 or worse, stop and investigate. At that stage, there is little point calling it good enough. ## Tuning an aerial to improve SWR Most CB aerials are tuned by adjusting the whip length. Some have a grub screw that lets you slide the whip in or out. Others may require trimming. Always check the aerial design before making changes. The sensible approach is to install everything properly first, then test. If adjustment is needed, make very small changes and recheck each time. You are not just tuning the aerial on its own. You are tuning it in the exact place and configuration where it will be used. This is why bench-testing an aerial away from the vehicle tells you very little about final SWR. Once mounted on the actual vehicle, near the actual bodywork and accessories, the reading can change quite a bit. If the SWR will not come down with normal adjustment, do not keep cutting or fiddling blindly. Check the mount, earthing, coax and connectors before blaming the aerial. ## Common mistakes when chasing SWR One of the most common mistakes is trying to tune around a fault. If the coax is damaged or the mount is not making proper contact, no amount of whip adjustment will fix the root problem. Another is assuming every vehicle should tune the same way. A hatchback, a Defender, a pickup and a [homebase mast installation](https://cbradio.co.uk/product-category/cb-aerials/homebase-aerials/) all behave differently. The best aerial on paper is not always the best aerial for the space you actually have. There is also a tendency to obsess over tiny differences. If a setup is already reading safely and performing well, chasing a barely lower number can become time wasted. Good CB performance is the goal, not winning a contest for the prettiest meter reading. ## What is SWR on CB if you use a magnetic mount? With a magnetic mount, SWR still means exactly the same thing, but placement becomes even more important. A mag mount generally performs best on a large metal surface, usually near the centre of the vehicle roof. Move it to the edge, stick it on a smaller panel, or route the coax badly, and readings can shift. [Mag mounts](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/) can work very well, especially for temporary or occasional use, but they are still part of the same aerial system rules. If the SWR is high, the answer is not always a new radio. Often it is as simple as improving location or checking the lead and connector. ## When to get help If you are new to CB, SWR is one of those jobs that feels more complicated than it really is. Once you understand what the meter is telling you, fault-finding becomes much more logical. Still, there are times when it makes sense to ask for proper advice, especially if you are fitting out a 4×4, a lorry, or a base station with a less straightforward installation. A specialist retailer such as CB Radio UK can usually save you a lot of trial and error by helping match the right aerial, mount and cable to the job. A decent CB setup is not only about buying the radio. The aerial system is where performance is won or lost, and getting the SWR right is one of the simplest ways to make sure your kit works as it should when you actually need it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/what-is-swr-on-cb/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/what-is-swr-on-cb/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/what-is-swr-on-cb/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/what-is-swr-on-cb/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20What%20Is%20SWR%20on%20CB%20and%20Why%20It%20Matters&body=https%3A%2F%2Fcbradio.co.uk%2Fwhat-is-swr-on-cb%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/what-is-swr-on-cb/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/what-is-swr-on-cb/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/what-is-swr-on-cb/?share=telegram) - **Categories:** Uncategorised --- ### [How to Choose a CB Radio for Your Setup](https://cbradio.co.uk/how-to-choose-a-cb-radio/) **Published:** May 12, 2026 **Author:** **Excerpt:** Learn how to choose a CB radio for your vehicle or base setup, with clear advice on legal modes, features, aerials and real-world UK use. **Content:** The wrong CB radio usually looks fine on the shelf. The problems start later – awkward fitting in the cab, menus you never use, poor audio, or an aerial setup that holds the whole system back. If you are working out how to choose a CB radio, the best place to start is not with brand names or flashy extras, but with where and how you actually plan to use it. For some buyers, that means a compact mobile set in a 4×4 that gets muddy at weekends. For others, it is a straightforward road radio for daily driving, a unit for agricultural use, or a home-base station with a proper power supply and external speaker. The right radio is the one that suits your vehicle, your installation space, your level of experience, and the kind of communication you expect from it. ## How to choose a CB radio by use case The first question is whether you need a mobile CB radio or a base setup. A mobile unit is designed for installation in a car, van, lorry or off-road vehicle, usually running from a 12V supply. A base station setup is used indoors and normally needs a mains power supply, a suitable aerial arrangement, and a bit more room. If you mainly want vehicle-to-vehicle chat on convoys, green lanes, events, farms or work sites, a mobile set is the obvious choice. If you want a fixed station at home or in a workshop, your priorities change. Audio quality, speaker options, power supply choice and aerial placement often matter more than dashboard space. That sounds simple, but this is where plenty of people buy the wrong thing. A large front-firing radio with extra controls may be excellent in a home-base setup and a nuisance in a modern vehicle with limited mounting options. On the other hand, a very small compact radio can be ideal in a tight cab, but less satisfying if you prefer larger controls and a more traditional layout. ## Start with legal mode and channel requirements In the UK, one of the main buying decisions is whether you need a standard legal UK/EU CB radio or a multimode set. For many users, a standard FM radio covering the legal channels is enough. If your use is general road, off-road, recreational or local group communication, that may be all you need. Multimode radios are more specialised. They appeal to experienced users who want extra flexibility and additional operating modes. They are not the best starting point for everyone. If you are new to CB, it often makes more sense to buy a straightforward legal set that is easy to install and simple to operate well. This is one of those areas where more features do not automatically mean a better purchase. A radio with more options can be useful, but only if you know why you need them. Otherwise, you are paying for complexity rather than better day-to-day performance. ## Size, mounting and ease of use matter more than people expect A CB radio has to fit your vehicle in a practical way. That includes the radio body, the mic position, cable routing, and whether the controls are easy to use while parked or stopped. In a Defender, pickup or older 4×4, you may have more flexibility. In a newer vehicle, space can be far tighter. Compact radios are popular for good reason. They can be tucked away more easily, and some can even be paired with controls in the microphone, which helps in vehicles where dash space is limited. The trade-off is that very compact radios sometimes have smaller displays or fewer direct-access controls. If you wear gloves, drive off-road, or simply prefer equipment you can operate without squinting at a tiny screen, a larger radio with clearly spaced buttons may be the better choice. Good usability is not a luxury. It is part of choosing a setup you will actually enjoy using. ## Audio quality and speaker performance A CB radio is only useful if you can hear it properly. In a noisy cab, weak or thin audio quickly becomes irritating. This is especially true in off-road vehicles, commercial vehicles and older diesels where engine, tyre and road noise all compete with the radio. Some radios have stronger built-in speaker performance than others, but even a decent unit may benefit from an [extension speaker](https://cbradio.co.uk/product-category/extension-speakers/) if the radio is mounted out of the way. If your installation location is under a seat, in a cubby, or low in the dash, think about this from the start rather than treating it as an afterthought. Transmit audio matters too. A standard microphone is fine for most users, but some buyers later upgrade for clearer or louder voice transmission. That should not be the first decision, though. Start with a reliable radio and a proper installation. Fine-tuning the audio can come later. ## Features worth paying for, and features you may never use When comparing models, focus on features that make a genuine difference in everyday use. Auto squelch can be handy for beginners and casual users, especially if you want quick setup with minimal fiddling. Channel scanning may be useful if you monitor activity across several channels. A signal meter, ANL or noise reduction functions, and a clear display are all practical benefits. What matters depends on your use. For convoy and off-road communication, simple operation and dependable audio often beat a long feature list. For hobby users, extra controls and operating modes may have more appeal. There is no single best radio for everyone. A good rule is this: if you cannot explain why you need a feature, do not let it drive the purchase. Reliability, ease of use and compatibility with the rest of the setup usually matter more. ## The aerial is half the system, often more If you remember one thing when deciding how to choose a CB radio, make it this: the aerial matters enormously. A mediocre radio with a well-matched [aerial setup](https://cbradio.co.uk/product-category/cb-aerials/) will usually outperform a better radio paired with a poor aerial. For mobile installations, the right aerial depends on vehicle type, mounting position, height restrictions and how you use the vehicle. A long whip may offer strong performance, but it is not always practical for daily driving, low branches, car parks or off-road use. A shorter aerial is easier to live with, but there can be a performance trade-off. Magnetic mounts are convenient and popular, especially if you want a non-permanent setup. Fixed mounts are often preferred for a more solid long-term installation. For 4×4 users, durability matters just as much as raw performance. There is no point fitting an aerial that is perfect on paper if it gets caught, bent or knocked every weekend. This is why [starter kits](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/) can make sense for many buyers. They take some of the guesswork out of matching a radio, aerial and mounting accessories. That said, experienced users often prefer to build a setup around their exact vehicle and operating needs. ## Power, wiring and installation basics Most mobile CB radios are straightforward to power, but it is still worth checking the installation requirements before you buy. Think about cable runs, fuse protection, access to a clean power source, and where the radio will be mounted. If you are setting up a base station, you will need a suitable power supply as well as the radio itself. That adds another decision, but it also gives you more control over the final setup. Beginners sometimes underestimate installation as part of the buying decision. In reality, a radio that is slightly less glamorous but easy to fit properly is often the better buy than a feature-heavy model that turns into a headache before you ever get on air. ## So what should you buy? If you are new to CB, buy for simplicity. A legal UK mobile radio with clear controls, solid audio and a properly matched aerial will suit most drivers, 4×4 owners and casual users far better than an overcomplicated set. If space is tight, go compact. If usability matters more, go for a larger front-panel layout. If you already know you want multimode operation, base-station capability or upgrade paths for speakers, microphones and accessories, then it makes sense to choose a model that gives you more room to grow. Just be honest about whether you need those options now or simply like the idea of them. At CB Radio UK, we see this all the time: the best setups are rarely the most expensive. They are the ones matched properly to the vehicle, the user and the job. If you are still unsure, think less about the radio in isolation and more about the whole system – where it will be fitted, what aerial it will use, how noisy the vehicle is, and how often you will rely on it. Get those decisions right, and the radio itself becomes much easier to choose. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-choose-a-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-choose-a-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-choose-a-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-choose-a-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Choose%20a%20CB%20Radio%20for%20Your%20Setup&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-choose-a-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-choose-a-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-choose-a-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-choose-a-cb-radio/?share=telegram) - **Categories:** Uncategorised --- ### [Best CB Radio for Beginners in the UK](https://cbradio.co.uk/best-cb-radio-for-beginners-uk/) **Published:** May 10, 2026 **Author:** **Excerpt:** Looking for the best CB radio for beginners? This practical UK guide explains what to buy, what to avoid, and which features matter most. **Content:** Buy the wrong first CB radio and you usually find out the hard way – awkward menus, poor audio, a cheap aerial that lets the whole setup down, or a unit that simply does not suit the way you drive. If you are trying to find the best CB radio for beginners, the smartest move is not chasing the longest feature list. It is choosing a radio that is easy to use, reliable in real conditions, and sensible to install in the vehicle or base setup you actually have. For most beginners in the UK, that means keeping things simple. A clear display, straightforward controls, legal UK compatibility, decent receive audio and a radio that works well with a [proper aerial](https://cbradio.co.uk/product-category/cb-aerials/) will matter far more than a pile of functions you may never touch. Whether you are fitting out a 4×4, adding comms to a work vehicle, or getting started for recreational use, the best first radio is the one you can set up confidently and use without a manual on your lap. ## What makes the best CB radio for beginners? A beginner-friendly CB radio is not necessarily the cheapest set on the shelf. Budget matters, of course, but there is a difference between good value and false economy. A very cheap radio can still work, yet if the controls are fiddly, the speaker is weak or the build quality feels flimsy, many new users give up before they get the best from it. The better starting point is ease of use. Large channel controls, a readable screen and direct access to volume and squelch make a real difference when you are on the move. You do not want to be digging through layers of menus just to quieten background noise or change channel on a green lane. Good audio is another big part of it. Beginners often assume range is all about the radio box itself, but in practice clarity is what helps day to day. If incoming speech is muffled or the speaker is too small, even a decent signal becomes a chore to listen to. A simple radio with strong, clean receive audio is often a better buy than a more advanced one with a poorer user experience. Then there is installation. Some radios suit tight dashboards and modern vehicle cabins better than others. If space is limited, a compact chassis or a handset-based design may be the right answer. If you have plenty of room in a Defender, pickup or older 4×4, a more traditional front-panel radio may be easier and more satisfying to use. ## The features beginners actually need Most first-time buyers do not need every extra going. They need a set that covers the basics properly. AM and FM can be worth having, especially if you want flexibility across different user groups, but what matters most is that the radio is legal and suitable for UK use. Channel scan is useful, particularly if you are listening for activity rather than staying on one agreed channel. Automatic squelch can also help newcomers, although some users still prefer manual squelch once they get used to setting it themselves. A backlit display is not just a cosmetic extra. If you are using the radio in poor light, on early starts or during night driving, a clear screen is far easier to live with. The same goes for signal meters and transmit indicators. They help beginners understand what the radio is doing without guesswork. What you probably do not need straight away is a very advanced multimode setup, complex memory arrangements or specialist controls aimed at experienced hobby users. Those features have their place, but they can complicate a first purchase. It is often better to start with a solid, conventional set and upgrade later if your use grows. ## Mobile or homebase – choose for how you will actually use it This is where many buyers go slightly off course. They shop by specification instead of use case. If your CB is going in a 4×4, daily driver, van or agricultural vehicle, durability and mounting options matter. A radio that is easy to secure, easy to glance at and easy to operate with minimal distraction is the better choice. In off-road conditions especially, simple knobs and buttons usually beat tiny controls. If your first setup is for home use, you have a bit more freedom. A larger radio may be fine, and you might place more value on front-facing speakers, a larger display or extra convenience features. Even then, beginner-friendly still means clear and uncomplicated rather than overloaded. Some users want one radio that can move between vehicle and homebase use. That can work well, but be realistic about the practical side. Swapping power arrangements, microphones and aerial connections is easy enough if you are comfortable with the kit, less so if you are completely new. In that case, a dedicated starter setup is often the tidier option. ## Why the aerial matters as much as the radio Ask experienced CB users what beginners get wrong, and the aerial will come up quickly. You can buy a very decent radio and still be disappointed if it is paired with a poor antenna or mounted badly. If you are choosing the best CB radio for beginners, think in terms of a complete system. The radio, aerial, mount, cable and tuning all work together. A modest radio with a properly matched and well-installed aerial will usually outperform a more expensive set connected to a compromised antenna. For vehicle use, the right aerial depends on where and how you drive. A tall antenna may give stronger performance, but it may not suit car parks, forestry tracks or daily use where clearance is limited. A shorter aerial can be more practical, even if there is a small trade-off in outright performance. There is no point buying for maximum range if the aerial is forever being removed or knocked about. This is why [starter kits](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/) can make sense for new users. When the core parts are matched properly, setup becomes simpler and there is less chance of buying incompatible bits. A specialist retailer such as CB Radio UK is useful here because the advice is based on actual radio use, not generic electronics selling. ## Common mistakes first-time buyers make The first is buying on price alone. Saving money matters, but a radio that is frustrating to use is not good value. The second is ignoring size and fitment. A radio may look ideal online and then prove awkward once you try to mount it in a crowded dashboard. Another common issue is expecting the radio body to do all the work. In reality, aerial choice, installation quality and tuning will have a huge effect on results. Beginners also sometimes overestimate how much complexity they need. If your main aim is convoy comms, casual use, site communication or keeping in touch on the road, a straightforward set is usually the right place to start. There is also the question of microphones. Most standard mics are perfectly serviceable, and for a first setup there is no need to overcomplicate it. Better to spend the budget on the radio and aerial combination than chase accessories too early. ## Best CB radio for beginners – what to buy first Rather than chasing one supposed perfect model, look for a radio that fits four simple tests. It should be easy to operate, suit your installation space, offer clear audio, and come from a proven brand with parts and support readily available. For many UK beginners, a compact mid-range mobile CB is the sweet spot. It gives better day-to-day usability than the very cheapest options, without pushing you into advanced territory you may not need. If you are fitting a vehicle with limited space, a compact set becomes even more attractive. If you have more room and prefer larger controls, a traditional chassis radio may be the better buy. If you are mainly off-road, pay attention to build quality and usability with gloves or muddy hands. If you are a road user covering regular miles, look for a radio with clear receive audio and simple channel changes. If it is mostly for hobby use at home, think about comfort, visibility and how the radio will pair with your chosen [power supply](https://cbradio.co.uk/product-category/power-supplies-and-inverters/) and antenna setup. That is really the heart of buying your first set. The best CB radio for beginners is not one fixed answer for everybody. It depends on your vehicle, your available space, your budget and whether you want a simple local comms setup or a starting point you can build on later. ## A sensible budget for a first setup It is usually wiser to set a budget for the full package rather than the radio on its own. A radio, aerial, mount, coax and any fitting accessories should be treated as one purchase. If your entire budget disappears into the transceiver, the rest of the setup often suffers. For most new users, a balanced starter budget gets better results than buying a premium radio and compromising elsewhere. You want dependable gear, not bragging rights. Spend enough to avoid the flimsiest end of the market, but keep the setup sensible until you know how much you will use it. If you are unsure, ask the simplest possible question when shopping: what setup will work reliably for my vehicle and the way I use it? That usually leads to a better answer than asking for the most powerful or most advanced unit. A good first CB should make you want to keep using it. If the controls are intuitive, the audio is clear and the aerial is doing its job, you will learn quickly and enjoy the setup far more. Start with practical, proven kit, and the rest can come later. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-radio-for-beginners-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-radio-for-beginners-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-radio-for-beginners-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-radio-for-beginners-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Best%20CB%20Radio%20for%20Beginners%20in%20the%20UK&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-radio-for-beginners-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-radio-for-beginners-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-radio-for-beginners-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-radio-for-beginners-uk/?share=telegram) - **Categories:** Uncategorised --- ### [What CB Radio Do I Need in the UK?](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/) **Published:** May 8, 2026 **Author:** **Excerpt:** What CB radio do I need? Find the right UK CB set for 4x4, road, homebase or hobby use, with practical advice on features, aerials and fit. **Content:** If you are asking what CB radio do I need, the real question is usually what you need it to do on a wet lane, a motorway run, a green lane convoy or from a shed, workshop or homebase. CB radios are not one-size-fits-all. The right set depends on where you use it, how often you use it, what vehicle you drive and whether you want a simple switch-on-and-go radio or something with more capability. That is where many buyers get stuck. They see compact sets, DIN-sized units, handhelds, multimode radios and starter kits, and it all starts to look the same. It is not the same. A radio that works well in a Defender with limited dash space is not always the best choice for a farm pickup, a motorway car or a base-station setup at home. ## What CB radio do I need for the way I use it? Start with use, not with features. If you mostly want convoy chat on 4×4 trips, laning days or events, a straightforward UK CB radio with easy controls is usually the best buy. You do not need a complicated menu system to keep in touch over a few miles. You need something clear, reliable and simple enough to use without taking your eyes off the track. If your main use is road driving, perhaps in a van, pickup or lorry, compact size and clean installation matter more. A radio with a clear display, instant channel access and a good external speaker option often makes more sense than a larger enthusiast model with features you may never touch. If you want a homebase setup, the answer changes again. Size matters less, and ease of powering the set from a proper power supply becomes part of the decision. Some users also prefer a radio with a larger front panel, [stronger speaker audio](https://cbradio.co.uk/product-category/extension-speakers/) and more traditional controls when it is sitting on a desk or bench. Then there is the hobby side. If you are buying because you enjoy radio itself and want more flexibility, channel options and extra functions may be worth paying for. But for many first-time buyers, more features can mean more confusion. There is no point buying beyond your needs on day one. ## The main types of CB radio For most UK buyers, the first split is between a standard mobile CB, a compact CB and a handheld CB. A standard mobile CB is the familiar choice for vehicle fitting. It gives you a solid front speaker or external speaker option, a normal microphone, sensible controls and usually better day-to-day usability than a handheld. If you have room to mount it properly, this is often the safest choice. A compact CB is ideal when cab space is tight. That could be in a modern 4×4, a smaller car or a neat dash installation where a full-sized unit is awkward. The trade-off is that tiny buttons and menus can be less friendly when you are on the move, especially in gloves or poor light. A handheld CB sounds convenient, and sometimes it is. For occasional use, events or walking around a site, it can do the job. But in a vehicle, handhelds are usually a compromise. Battery life, antenna limitations and lower convenience compared with a fixed mobile setup mean they are rarely the best long-term answer for regular drivers. ## What CB radio do I need for a 4×4? For off-road use, durability and practicality come first. You want a radio that is easy to operate by feel, has a microphone that can take a bit of abuse and fits the available space without becoming a nuisance. A compact mobile set is often a very good fit in a 4×4, especially where modern interiors leave little room for a traditional chassis. Audio clarity matters more than many people expect. Off-road tyres, engine noise, rattles and open windows all work against you. A radio with decent speaker output, or one that works well with an extension speaker, is often worth it. A brilliant spec sheet means very little if you cannot hear the other vehicle calling you at the muddy climb. You should also think about where the radio will live. Under-dash, overhead, centre console and bracket mounting all affect what size set makes sense. The best radio on paper can become the wrong radio if the microphone lead is in the way of gear changes or the controls are hidden behind the steering wheel. ## What matters more than the radio itself A lot of people spend too long choosing the box and not enough time [thinking about the aerial](https://cbradio.co.uk/product-category/cb-aerials/). In practice, the aerial setup has a huge effect on performance. A modest radio with a well-chosen, properly mounted and tuned antenna will usually outperform a more expensive set with a poor installation. For mobile use, antenna length, mounting position and grounding all matter. A short aerial may be easier to live with in car parks, forests and low branches, but there is usually a performance trade-off compared with a longer whip. That does not mean longer is always better. It means you need the best match for your vehicle and use. In a 4×4, many owners want a setup that survives trees, mud and rough tracks. That often points towards a flexible aerial and a sturdy mount rather than the tallest option available. On-road users may lean more towards maximum range if clearance is less of an issue. Homebase users are in a different camp again, where external antenna placement becomes a key part of getting decent results. ## Features worth paying for and features you may not need The basics still matter most. Clear transmit and receive audio, sensible controls, reliable construction and compatibility with UK CB operation should be at the top of the list. After that, the value of extra features depends on the user. Auto squelch can be useful for beginners because it cuts background noise without constant fiddling. Channel scan can help if you are listening around rather than staying on one agreed channel. Backlit controls and a readable display are handy in poor light. PA function, Roger beep and some of the flashier extras are often less important than they first appear. If you are an enthusiast buyer, multimode capability may be part of your thinking. That is a more specialist purchase and not always the right starting point for someone who simply wants dependable vehicle-to-vehicle communication. Buy for your actual use, not for every possible use you might one day have. ## Installation decides whether you enjoy using it A CB radio can be perfectly good and still become irritating if it is badly installed. Power supply routing, microphone position, antenna cable runs and speaker placement all affect daily use. A neat install is not just about appearance. It affects safety, ease of operation and long-term reliability. If you are fitting into a working vehicle, think about what happens on a normal day. Can you reach the controls easily? Can you stow the microphone securely? Will the radio stay dry and reasonably clean? Does the cable routing avoid pinch points and sharp edges? Those practical details matter every bit as much as the badge on the front. [Starter kits](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/) can make life easier here, especially for first-time buyers. A well-matched package removes a lot of guesswork, particularly when pairing a radio with a suitable antenna, mount and basic accessories. That is often a better route than buying bits separately and finding out too late that they do not suit each other. ## So, what CB radio do I need as a beginner? If you are new to CB, the best answer is usually a legal UK mobile set with simple controls, good audio and a matched antenna package suited to your vehicle. Not the cheapest thing you can find, and not the most feature-heavy set either. You want something you can fit, tune and use without turning every journey into a fault-finding exercise. For a 4×4 owner, that often means a compact or mid-sized mobile radio paired with a durable vehicle antenna. For a van or lorry driver, a straightforward full-featured mobile set with a clear display can be a better fit. For home use, a larger desktop-friendly mobile unit with a proper power supply arrangement often makes more sense than a handheld. If you already know you are an enthusiast, then it is reasonable to look at more advanced sets. Just be honest about whether you want extra capability or simply like the idea of it. There is nothing wrong with either, but they are not the same thing. At CB Radio UK, the easiest way to get this right is to work backwards from the vehicle, the mounting space and the type of use. Once those three points are clear, the shortlist usually becomes obvious. The right CB radio is the one that fits your vehicle, suits your use and gets used properly – because a dependable setup you use every week is worth far more than a clever one that never quite works how you hoped. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20What%20CB%20Radio%20Do%20I%20Need%20in%20the%20UK%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fwhat-cb-radio-do-i-need-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/what-cb-radio-do-i-need-uk/?share=telegram) - **Categories:** Uncategorised --- ### [Off Road Communication Systems That Work](https://cbradio.co.uk/off-road-communication-systems-that-work/) **Published:** May 6, 2026 **Author:** **Excerpt:** Off road communication systems keep convoys connected where phones fail. Learn what works, what to fit, and how to choose the right setup. **Content:** You notice weak comms at exactly the wrong moment – when the lead motor drops into a wooded lane, the tail-end vehicle is held up at a gate, and mobile signal has already disappeared. That is where off-road communication systems stop being a nice extra and start being basic kit. If you run green lanes, pay-and-play sites, recovery support or club convoys, clear vehicle-to-vehicle comms make the day easier, safer and far less frustrating. The mistake many people make is assuming there is one perfect answer. There is not. The right setup depends on who you drive with, how far apart your vehicles tend to get, the terrain you cover, how permanent you want the installation to be, and whether you want simple push-to-talk use or a more capable radio system with room to expand. ## What makes off-road communication systems reliable? In off-road use, reliability is less about fancy features and more about practical performance. Mud, water, vibration, tree strikes, roof racks, bonnet mounts and soft-top bodywork all affect how well a system works in the real world. A radio that looks good on paper can still disappoint if the aerial is badly positioned or the installation is rushed. For most UK 4×4 users, the backbone of off-road communication systems is still radio. Mobile phones are too dependent on coverage, and app-based systems are only as good as the network underneath them. On remote lanes, forest tracks and exposed hills, that can mean no service at all. Radio stays local, direct and immediate. That matters in the situations that crop up on almost every off-road day. You need to warn the group about an obstacle, call for a recovery strap, guide someone through a rut, or let the convoy know you are stopping. None of that needs a complicated setup. It needs clear speech, simple controls and equipment that can cope with vehicle use. ## CB radio remains the practical starting point For many drivers, CB is still the most sensible place to begin. It is well understood, straightforward to use and well suited to convoy communication. You are not relying on subscriptions, paired devices or a mobile mast somewhere beyond the next ridge. Press the mic, speak, and everyone on the same channel hears you. CB works especially well for club runs, laning groups and casual off-road events because it keeps things simple. A beginner can get comfortable with it quickly, while experienced users can fine-tune the setup with better aerials, external speakers or compact installation options. In other words, it scales nicely from basic to more sorted. The trade-off is that performance [depends heavily on installation](https://cbradio.co.uk/cb-radio-manuals/). A poor aerial mount, weak earth, cheap coax or badly tuned setup will limit range and clarity. People often blame the radio first, when the aerial system is the real issue. In off-road vehicles, where body shapes and accessories vary wildly, getting the antenna side right is half the job. ### Why aerial choice matters more than most people think A compact handheld may look convenient, but a vehicle-mounted unit with a properly fitted aerial will usually outperform it for routine convoy use. Height, grounding, mounting position and whip flexibility all play a part. Aerials mounted low behind bodywork or tucked awkwardly around racks and accessories can lose valuable performance. That does not mean every 4×4 needs a huge whip. It means the aerial should suit the vehicle and the way it is used. If you spend weekends in wooded routes, a tougher flexible antenna may make more sense than chasing every last bit of range. If you do open terrain and want stronger performance over distance, you may accept a taller setup and take more care with positioning. ### Fixed CB or handheld CB? This is one of the most common questions, and the honest answer is that it depends. A fixed CB gives you better installation options, an external aerial, stable power and generally better day-to-day usability. For a dedicated off-road vehicle, it is normally the stronger choice. A handheld CB makes sense if you want portability, occasional use, or a backup unit you can carry outside the vehicle during recoveries and spotting. The compromise is usually antenna efficiency and battery management. For some users, the best arrangement is both – a fixed main radio in the cab and a handheld as a spare or support tool. ## Other off-road communication systems worth considering CB is not the only route, but alternatives need to be chosen for the right reasons. PMR handhelds are popular because they are easy to buy and simple to hand out around a group. They can work well for short-range use, marshals, spotters and events where people are on foot as much as in vehicles. Their weakness in vehicle-to-vehicle use is often limited range and reduced performance inside metal-bodied 4x4s. Network-based radio systems can be useful if your driving area has strong mobile data coverage and your group wants broad-area communication. They are less tied to line-of-sight conditions than traditional local radio. The obvious catch is coverage. In rural Britain, that can change quickly. For green laning and remote recreational use, many drivers still prefer the certainty of radio that does not depend on the phone network. Amateur radio opens more capability, but it is not a casual drop-in replacement for CB. Licensing, band use and operating expectations are different. For enthusiasts who want to go further technically, it can be a very good fit. For general convoy comms where you need straightforward access for everyone in the group, CB remains the easier option. ## Choosing the right setup for your vehicle The best system is the one that suits the vehicle and gets used properly. A daily-driven Defender, a weekend Jimny, a lifted pick-up and a tour-prepped Discovery all have different installation constraints. Space in the cab matters more than people expect. Modern compact radios are easier to mount neatly, but microphone placement, speaker clarity and power routing still need thought. Off-road vehicles can be noisy, so a radio that is perfectly audible on the drive may be hard to hear once you are on mud tyres in low range. An [extension speaker](https://cbradio.co.uk/product-category/extension-speakers/) can make a surprising difference. Power supply is another point worth getting right. Hard-wiring tends to be more dependable than temporary socket-based solutions, especially on rough ground where vibration can expose weak connections. Equally, neat cable routing matters. Nobody wants snagged leads around gear levers, switch panels or passenger footwells. Then there is the mount itself. Bonnet, wing, roof and rear body mounts all have pros and cons. The neatest-looking position is not always the best-performing one, and the highest mount is not always the most durable if the vehicle spends its life under branches. Good off-road communication systems are built around sensible compromises, not catalogue perfection. ## What to look for before you buy A lot of buying decisions come down to how honest you are about your use. If you only do occasional local events, a simple starter setup may be all you need. If you run regular convoys, travel in mixed terrain and want dependable comms every time, it is worth spending more carefully rather than buying twice. Look at the whole package, not just the radio unit. The aerial, mount, coax, SWR tuning, microphone, speaker options and installation accessories all affect the result. A decent radio paired with the [wrong aerial setup](https://cbradio.co.uk/product-category/cb-aerials/) can underperform badly. A sensible, balanced system usually gives better real-world results than putting all the budget into the head unit alone. Support matters as well. Radio equipment is one of those areas where proper advice can save time, money and frustration. A specialist retailer such as CB Radio UK can help match radios, aerials and mounts to the vehicle you actually drive, rather than the imaginary ideal setup that only works on a flat workshop floor. ## Common mistakes with off-road communication systems The first is underestimating the aerial. The second is treating installation as an afterthought. The third is buying for maximum stated range rather than actual use. Quoted range figures mean very little without context. Terrain, vegetation, vehicle spacing, mounting position and local interference all change the picture. On open ground, you may get very respectable performance. In valleys, woodland or broken terrain, expectations need adjusting. That is normal, not a sign that the kit is faulty. Another common mistake is fitting equipment that is awkward to use on the move. Tiny controls, poor microphone placement or muffled audio soon become irritating. Off-road communication should reduce hassle, not create more of it. The best approach is usually the practical one. Choose a radio system that suits your group, install it properly, and build around the conditions you actually drive in. When the route gets tight, the weather turns and phone signal drops away, good comms are one of the few bits of kit you will appreciate every single time you key the mic. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/off-road-communication-systems-that-work/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/off-road-communication-systems-that-work/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/off-road-communication-systems-that-work/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/off-road-communication-systems-that-work/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Off%20Road%20Communication%20Systems%20That%20Work&body=https%3A%2F%2Fcbradio.co.uk%2Foff-road-communication-systems-that-work%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/off-road-communication-systems-that-work/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/off-road-communication-systems-that-work/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/off-road-communication-systems-that-work/?share=telegram) - **Categories:** Uncategorised --- ### [8 Best CB Antennas for 4x4 Use](https://cbradio.co.uk/best-cb-antennas-for-4x4/) **Published:** May 4, 2026 **Author:** **Excerpt:** Find the best CB antennas for 4x4 use, with practical advice on whip length, mounts, tuning and durability for UK off-road driving. **Content:** A CB setup in a 4×4 usually fails or shines on one part alone – the antenna. You can spend good money on the radio itself, but if the aerial is poorly matched to the vehicle, mounted in the wrong place, or simply not suited to off-road use, performance drops off quickly. That is why choosing the best CB antennas for 4×4 use is less about picking the most expensive model and more about getting the right type for how and where you drive. For green laning, pay-and-play sites, farm tracks, convoy work or rural road use, a 4×4 antenna has to do more than transmit well. It has to survive branches, vibration, mud, water, low roofs and regular knocks. The best option for one vehicle can be the wrong one for another, especially when roof height, mounting points and day-to-day use are taken into account. ## What makes a CB antenna good for a 4×4? A good 4×4 CB antenna needs three things in balance – usable range, physical durability and a sensible fit for the vehicle. Longer antennas generally perform better because they are more efficient, but they are also more likely to catch on trees, garage entrances and obstacles. Shorter antennas are easier to live with, though you usually give up some outright performance. The mount matters just as much as the whip. A strong antenna on a weak gutter or mirror mount will move about, wear the fixings and make tuning more difficult. Likewise, a decent body earth is essential on many installations. If the mount location is poor, even a well-made aerial can underperform. For most UK 4×4 users, the sweet spot is usually a tough mobile antenna with enough flexibility to take knocks, paired with a solid mount on a rear quarter, spare wheel bracket, roof bar or bonnet edge. [Magnetic mounts](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/) can work, but on vehicles that see proper off-road use they are rarely the first choice. ## Best CB antennas for 4×4 drivers There is no single winner for every Land Rover, pickup, Shogun, Hilux or Defender. What works best depends on how much height you can tolerate, whether you want a discreet install, and how serious your off-road use is. ### 1. Mid-length fibreglass antennas For many drivers, a mid-length fibreglass antenna is the most sensible all-round choice. These antennas are tough, reasonably flexible and better able to cope with brush and branch strikes than some stiffer metal whips. They also tend to suit rear body mounts well, which is handy on 4x4s where roof access and clearance can be awkward. Performance is usually strong enough for convoy work and general mobile use, without becoming a nuisance every time you pull into a car park. If you use your vehicle for both everyday road driving and weekend off-road trips, this type is often where to start. ### 2. Spring-based steel whip antennas A steel whip with a heavy-duty spring is a classic off-road setup for good reason. The whip can flex under impact, and the spring helps absorb repeated knocks from rough terrain and overhanging branches. These are popular with users who prioritise resilience and do not mind a more obvious install. The trade-off is that a longer steel whip can be lively at speed, and on some vehicles the movement can be distracting if the mount is not very secure. Done properly, though, this style gives dependable performance and a proper working-vehicle feel. ### 3. Short loaded antennas If height is your biggest problem, a short loaded antenna may be the right answer. These are useful for vehicles that spend time in multi-storey car parks, under barriers, or in built-up areas where a full-length whip is more trouble than it is worth. The compromise is predictable – shorter antennas are typically less efficient. That does not make them useless. For local use, casual group runs and basic communication on the trail, a good short loaded aerial can still do the job well enough. You just need realistic expectations. ### 4. Heavy-duty base-loaded antennas A base-loaded antenna is often a good fit for 4×4 use because the loading coil is positioned lower down and better protected than on some centre-loaded designs. They can be sturdy, easier to mount securely, and less awkward around branches than taller alternatives. This type often suits drivers who want a strong everyday setup without going to an extreme whip length. If your vehicle sees mixed road and off-road use, base-loaded antennas are worth serious consideration. ### 5. Flexible trail antennas Some antennas are built specifically with off-road punishment in mind. These flexible designs favour survivability over outright range and are useful on vehicles that regularly squeeze through wooded lanes or rough site access tracks. They are not always the top choice for longest-distance performance, but they can be the right choice if your current aerial keeps getting damaged. There is no point fitting a high-performing antenna if it spends half its life bent, loose or snapped. ### 6. Full-length quarter-wave whips If pure performance is the goal, a full-length quarter-wave whip remains hard to beat. This style is efficient and often simpler in electrical terms than heavily loaded compact antennas. On an open vehicle with a good mounting point, results can be excellent. The problem is practicality. On many 4x4s, a full-length whip is simply too tall for daily use in the UK. It may suit a dedicated off-road or rural vehicle, but for most mixed-use owners it is more antenna than they can comfortably live with. ### 7. Bonnet-mount friendly antennas Bonnet edge mounts are popular because they avoid roof drilling and can be easier to route cable from. If you are using that kind of setup, choose an antenna that is not excessively long or heavy. Too much whip on a light bonnet mount can lead to vibration, poor grounding and long-term stress on the panel. A medium-weight antenna usually makes more sense here than a very tall heavy-duty whip. This is one of those areas where the best CB antennas for 4×4 installations are the ones that suit the mount, not just the catalogue spec. ### 8. Rear-mount antennas for expedition-style setups Rear ladder, spare wheel and body-mounted positions are common on off-road builds. They keep the aerial away from the driver’s line of sight and often provide room for a sturdier bracket. A medium to long flexible antenna works well in these positions, particularly on vehicles carrying roof tents, racks or auxiliary gear. The only caution is pattern and placement. If the antenna sits too low beside bodywork or metal accessories, performance can suffer. Mounting it high and clear usually pays off. ## How to choose the right 4×4 CB antenna Start with your vehicle height and where it actually goes. A daily-driven SUV that occasionally joins a laning trip needs a different antenna from a dedicated challenge lorry or farm 4×4. If you use low car parks, ferries, garages or urban streets regularly, a manageable antenna will likely serve you better than the biggest option available. Then look closely at the mounting position. Roof mounting often gives the best all-round signal pattern, but it is not always practical on a 4×4 with roof bars, tents or limited cable routes. Bonnet and rear mounts are common because they are workable, sturdy and easier to fit. They can perform very well when installed properly. You also need to think about terrain. In wooded areas, flexibility matters. In open country, a longer antenna may be worth the added inconvenience. On rocky or rough tracks, a secure spring and bracket setup can be more valuable than chasing a small gain improvement on paper. ## Tuning matters more than badge names A badly [tuned premium antenna](https://cbradio.co.uk/cb-radio-manuals/) will still perform poorly. [SWR setup](https://cbradio.co.uk/product-category/tools/) is not an optional extra – it is part of the installation. Once the antenna is mounted in its final position, the system should be checked and adjusted correctly. Tuning problems often come from simple issues such as poor earth, paint under the mount, weak fixings, damaged coax, or trying to test the antenna before the vehicle is fully assembled. Get those basics right first. Many apparent antenna faults are really installation faults. ## Common mistakes with 4×4 antenna installs One of the biggest mistakes is choosing purely by advertised gain without considering use. Another is mounting the antenna too low, too close to metalwork, or on a bracket that flexes badly. Off-road vehicles put more stress on fittings than ordinary road cars, so mounts and cable routing need to be up to the job. It is also common to go too short in search of convenience, then wonder why performance is disappointing. Compact antennas have their place, but there is always a trade-off. If communication matters on group runs or in rural areas, it is usually worth fitting the longest practical antenna your vehicle can sensibly carry. For UK users who want specialist advice rather than guesswork, this is where a dedicated retailer such as CB Radio UK can make the process much easier. ## Which option suits most drivers? For most 4×4 owners, the best balance comes from a medium-length, durable antenna with some flexibility, mounted securely at the rear or on a bonnet bracket and tuned properly. That gives enough performance for real-world mobile use without making the vehicle awkward every day. If you are building a serious off-road lorry, a spring-mounted whip or flexible heavy-duty antenna may be the better bet. If you need a neat daily-use setup, a shorter loaded model can still work well provided you accept its limits. The right aerial is the one that stays fitted, stays tuned and keeps working when the lane gets tight, the weather turns and the convoy spreads out. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-antennas-for-4x4/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-antennas-for-4x4/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-antennas-for-4x4/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-antennas-for-4x4/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%208%20Best%20CB%20Antennas%20for%204x4%20Use&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-antennas-for-4x4%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-antennas-for-4x4/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-antennas-for-4x4/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-antennas-for-4x4/?share=telegram) - **Categories:** Uncategorised --- ### [How to Tune CB Antenna Properly](https://cbradio.co.uk/how-to-tune-cb-antenna/) **Published:** May 2, 2026 **Author:** **Excerpt:** Learn how to tune CB antenna setups properly with simple UK-focused advice on SWR, mounting, common faults and getting the best signal. **Content:** If your CB sounds weak, cuts out early, or shows a high SWR reading, the aerial usually needs attention before the radio does. Learning how to tune CB aerial systems properly is one of the most useful jobs any CB user can do, whether you run a 4×4, daily driver, lorry or homebase setup. A badly tuned aerial will not just shorten your range. It can make the radio harder to use, create inconsistent transmit performance, and in some cases put unnecessary strain on the set. The good news is that tuning is straightforward once you understand what you are adjusting and why. ## What tuning a CB antenna actually means Tuning a CB aerial is really about matching the aerial system to the radio so the transmitted power goes where it should. The figure most people use for this is SWR, or standing wave ratio. In plain terms, SWR shows how much of your transmit power is being sent out through the aerial and how much is being reflected back. Lower is better. An SWR reading around 1.1 to 1.5 is very good. Around 1.5 to 2.0 is usually acceptable for many mobile installations. Once you start getting above 2.0, it is time to stop and sort the issue properly. If it is much higher than that, do not keep keying up and hoping it improves. That is why people ask how to tune CB aerial setups, but tuning is only part of the picture. A poor earth, bad coax, the wrong mounting position or even a loose connector can all produce poor SWR. If the installation is faulty, no amount of adjusting the whip will fix it. ## What you need before you start For most CB installations, you need an [SWR meter](https://cbradio.co.uk/product-category/tools/), a short patch lead to connect the meter, and a place where you can test the setup without interference from nearby buildings, fences or other vehicles. If you are tuning a vehicle aerial, park it in an open area and keep doors, bonnet and tailgate shut, because opening them can affect readings. You also need to know how your aerial adjusts. Some have a tunable tip, some use a small grub screw and sliding whip, and others are cut-to-length designs. Do not start trimming anything unless you are sure that is how the aerial is meant to be tuned. A tunable-tip aerial gives you room for correction. A cut whip does not grow back. ## How to tune CB aerial systems step by step Start by checking the basics. Make sure the mount is tight, the coax is undamaged, and the PL259 connectors are fitted properly. On a mobile installation, confirm the mount has a good earth if it is an earth-dependent aerial. Magnetic mounts are simpler, but they still need to sit flat on a decent metal surface. Next, connect the SWR meter between the radio and the aerial lead. The radio connects to the socket marked transmitter or TX, and the aerial lead connects to the aerial side. It sounds obvious, but getting that backwards gives useless readings. Set the radio to FM or AM on a legal UK CB channel and choose the channel you want to test with. Many people use channel 20 as a starting point because it sits roughly in the middle of the band. Calibrate the meter according to its instructions, key the microphone briefly, and take a reading. Then compare readings on channel 1 and channel 40. This is where the useful information comes from. If the SWR is higher on channel 1 than channel 40, the aerial is usually too short and needs lengthening. If the SWR is higher on channel 40 than channel 1, the aerial is usually too long and needs shortening. Make very small adjustments. A few millimetres can make a noticeable difference, especially on shorter mobile whips. After each adjustment, test again on channels 1, 20 and 40. The aim is not always to chase a perfect number on one channel. You want the best balance across the operating range. ## Reading the results properly This is where many users get caught out. If your SWR stays high on all channels, the problem may not be aerial length at all. A reading above 3.0 across the band often points to an installation fault rather than simple tuning. For example, if you fit a body-mount aerial to a bracket on a spare wheel carrier, roof bar or light bar, you may not have the earth plane that aerial needs. Some no-ground-plane aerials are designed for fibreglass bodies or awkward mounting points, but standard body-mount models usually expect good metal contact and enough surrounding metal to work properly. Likewise, a nice-looking installation on a Defender, pickup or off-road build can still perform poorly if powder coating, paint or rust prevents proper electrical contact. Mechanically solid does not always mean electrically sound. ## Common faults that look like tuning problems A lot of people assume the whip length is wrong when the real issue is elsewhere. The usual culprits are poor grounding, damaged coax, badly soldered plugs, corrosion in the mount, and unsuitable mounting positions. Roof mounting usually gives the best all-round performance because it puts the aerial high and central with a better ground plane. Wing, mirror and gutter mounts can work well, but they often need more care to get the best result. Rear mounts are common on 4x4s because they are practical off-road, though they can give a directional bias and may need a bit more compromise. Another common problem is coax routing. If the cable is crushed under trim, trapped in a door shut, or tightly coiled into a small loop, performance can suffer. There is a long-running myth that coax must be cut to a [magic length](https://cbradio.co.uk/cbradio-co-uk-tips-and-tricks/). In most CB mobile installations, that is not the real issue. Good quality cable, properly fitted, matters more than folklore. ## Mobile and homebase setups are not the same Vehicle tuning is often affected by body shape, mount position and accessories such as roof racks, spotlights and snorkels. If you move the aerial from one vehicle to another, expect to retune it. The same whip on a van roof and on a rear quarter mount of a 4×4 will not necessarily read the same. Homebase aerials are different again. Height, nearby buildings, guttering, scaffolding and cable routing all affect results. If you are tuning a base aerial, test with it mounted where it will actually be used. Tuning it at ground level and then raising it can change the match. ## When the aerial type matters Some aerials are more forgiving than others. A short loaded mobile aerial is convenient, especially for garages, green lanes and general 4×4 use, but it may be fussier to tune and rarely performs like a longer whip. A longer aerial generally gives better efficiency, but it is less practical for some vehicles and uses. That trade-off matters. If you mainly use your CB around town or on casual convoy runs, a compact aerial may be the right compromise. If you want the best possible mobile performance and can live with the height, a longer aerial usually wins. Tuning helps any aerial, but it cannot turn a very short whip into a high-performing long one. ## A few mistakes worth avoiding Do not tune next to buildings, under trees, beside metal fencing or in a workshop full of steelwork. Do not keep transmitting for long periods while trying to force a bad reading down. Do not cut a whip until you have ruled out earthing and coax faults. And do not judge performance by SWR alone. A setup with a respectable SWR but poor location can still underperform. Equally, an aerial with a slightly higher but stable reading in a sensible mounting position may work better on the road than one tuned for a textbook figure in the wrong place. ## If you still cannot get the SWR down Go back to first principles. Check continuity through the coax and mount. Make sure the centre pin is not shorting to the braid. Confirm the mount suits the aerial type. Inspect for paint, corrosion or insulating washers in the wrong place. If it is a magnetic mount, try a different position on the vehicle roof. If it is a bracket mount, run a proper earth strap if needed. Sometimes the answer is simply that the chosen aerial is not the right fit for the mounting point or vehicle. That is common with heavily modified 4x4s and utility vehicles where practical installation points are limited. In those cases, choosing the [right aerial](https://cbradio.co.uk/product-category/cb-aerials/) and mount combination matters as much as the tuning itself. At CB Radio UK, we see this regularly with off-road builds – the gear can be spot on, but the install needs to match how the vehicle is actually used. Get the foundation right, make small adjustments, and your CB will usually reward you with cleaner transmit, better range and fewer headaches every time you key up. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-tune-cb-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-tune-cb-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-tune-cb-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-tune-cb-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Tune%20CB%20Antenna%20Properly&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-tune-cb-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-tune-cb-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-tune-cb-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-tune-cb-antenna/?share=telegram) - **Categories:** Uncategorised --- ### [Mobile CB vs Base Station: Which Fits Best?](https://cbradio.co.uk/mobile-cb-vs-base-station/) **Published:** April 30, 2026 **Author:** **Excerpt:** Mobile CB vs base station - compare range, setup, cost and use cases to choose the right CB radio system for your vehicle, home or workshop. **Content:** If you mainly use CB on green lanes, in convoy, or during long runs across the UK, the mobile CB vs base station question usually comes down to one thing – where do you actually need reliable comms most often? A radio that works brilliantly in a Defender, pickup or lorry is not always the best choice for a shed, workshop or home shack. Equally, a tidy base setup with a strong antenna position is hard to beat, but it cannot come with you when the route gets muddy or the road opens up. For most buyers, this is less about which type is “better” and more about matching the kit to the job. That is where a lot of people go wrong. They compare output power and channel count, but overlook antenna placement, power supply needs, available space and how often they actually operate on the move. ## Mobile CB vs base station: the real difference A mobile CB is designed to be installed in a vehicle and powered from the vehicle’s 12V electrical system. It is built around practical use on the road or off road, with compact dimensions, easy-access controls and mounting options that suit dashboards, overhead consoles or under-dash positions. For 4×4 groups, farmers, site users and road drivers, this is the most direct way to keep communications with you. A base station is a fixed setup, usually at home, in a workshop, yard office or unit. That might mean a dedicated base radio, or a mobile CB radio used as a base with the correct 12V power supply and an external antenna. The radio itself is only part of the picture. A base station normally benefits from a higher-mounted antenna, a more stable [power source](https://cbradio.co.uk/product-category/power-supplies-and-inverters/) and fewer compromises on installation. That difference in installation matters more than most spec sheets suggest. In CB, the antenna system often makes a bigger difference than the badge on the front of the radio. ## Range and signal performance If you are comparing mobile CB vs base station on range alone, the base station often has the edge. Not because it necessarily runs more power on legal CB settings, but because the antenna can usually be mounted higher and in a cleaner location. Height is a big advantage in radio. A base antenna above roofline level generally gives a better chance of clearer local coverage than a mobile antenna mounted low on a vehicle. That said, a good mobile installation can still perform very well. A properly matched roof-mounted antenna on a vehicle with decent grounding will usually outperform a poor base setup with a badly positioned aerial. There is no magic in the word “base” if the antenna ends up tucked behind buildings, mounted too low, or fed through poor coax. Terrain also changes everything. In flat open areas, both types can work very well. In hilly ground, wooded lanes or built-up areas, signal paths become less predictable. Off-road users already know this – two vehicles a short distance apart can sound crystal clear one minute and patchy the next, simply because of dips, banks and obstacles. ## Where a mobile CB makes more sense For vehicle users, the case for mobile is straightforward. If the radio needs to travel with you, a base station is not really in the running. A mobile CB suits 4×4 convoys, road trips, laning groups, agricultural work, escort vehicles and anyone who needs instant communication away from home. The main strength is convenience. Once installed, the set is always there. Turn the ignition on, pick your channel and you are ready. That is ideal when communication is part of the day rather than a hobby session planned in advance. Mobile kit is also easier to justify if your contacts are mainly vehicle-to-vehicle. In convoy use, everyone is in roughly the same environment, often over short to moderate distances, and the goal is practical coordination rather than chasing every last mile of range. In that setting, compact radios, sturdy microphones and well-chosen mobile antennas matter more than a desk-based setup. There are compromises. Vehicle installs can be noisy electrically, space is limited, and antenna placement is often dictated by bodywork rather than ideal radio theory. Some modern vehicles also make routing cables and finding clean mounting points more awkward than older 4x4s and commercials. ## When a base station is the better option A base station is usually the better choice if most of your operating happens from one place. That could be a home operator who wants local chat, a yard or workshop needing reliable site communications, or someone who wants to monitor and use CB without fitting equipment to a vehicle. The big win is control over the installation. You can place the radio comfortably, use a suitable power supply, add an external speaker if needed and, most importantly, give proper thought to the antenna. A well-sited [base antenna](https://cbradio.co.uk/product-category/cb-aerials/homebase-aerials/) often delivers stronger and more consistent local performance than a mobile setup. A base station can also be the easier option if you use more than one vehicle. Rather than moving a radio between cars, vans or 4x4s, the fixed station stays in place. That is useful for dispatch-style use around a property, smallholding or unit where people come and go but one comms point needs to remain constant. The trade-off is obvious. Once installed, it stays there. If your real need is communication while driving, loading, travelling or crossing rough ground, a base setup solves the wrong problem. ## Cost, installation and ongoing practicality On paper, a mobile CB can look cheaper because the radio itself is often compact and widely available. But the full install still needs to be counted properly. You may need an antenna, mount, coax, SWR meter, [extension speaker](https://cbradio.co.uk/product-category/extension-speakers/) and fitting accessories. If you want a neat, durable installation in a working vehicle, it pays to do it once and do it right. A base station may need fewer vehicle-specific parts, but you will usually need a suitable power supply if you are using a 12V CB set indoors. Then there is the antenna, mast arrangement, cable run and mounting hardware. Costs can rise quickly if you are aiming for a cleaner outdoor installation. So neither option is automatically the budget winner. It depends on what you already have and how tidy you want the final result to be. Ease of use is another part of the equation. Mobile radios are built for quick operation with minimal fuss. Base setups are often more comfortable for longer use, especially if you want a better speaker position, easier access to controls and a proper operating space. ## Can you use a mobile CB as a base station? Yes, and plenty of people do. A mobile radio can work perfectly well as a home or workshop setup if you pair it with a proper 12V regulated power supply and a suitable external antenna. For many users, this is the most practical route because it keeps costs sensible and gives access to the same radio styles they already know from vehicle installs. This is often a good option for buyers who want flexibility. You might start with a mobile rig in the house, then later install a separate set in a vehicle, or move the radio if your needs change. It is also useful for occasional users who do not need a dedicated desktop-style station. The only caution is not to treat it as a shortcut. The power supply needs to be up to the job, the antenna still needs proper matching, and the overall performance will still depend heavily on installation quality. ## Which should beginners choose? Beginners often overthink the radio and underthink the use case. If you are new to CB and your main plan is driving, off-roading or convoy use, start with a mobile setup. It is the most natural fit, and the learning curve makes more sense when the radio is being used for a clear purpose. If you are mostly staying in one place and want a simple local station at home, in a shed or in a workshop, a base setup is more logical. It can also be easier to test, adjust and learn from because you are not working around vehicle trim panels and mobile antenna mounts. If you are undecided, think about where the radio will spend 80 per cent of its life. That usually gives you the answer faster than any feature comparison. ## Mobile CB vs base station: choose by how you actually operate The best setup is the one that suits your real routine, not the one that sounds most impressive in a forum thread. A mobile CB is the right tool for drivers, off-road groups and anyone who needs communication on the move. A base station makes more sense when fixed-location use, antenna height and operating comfort matter most. If you want the shortest answer, choose mobile for travel and choose base for one-location use. If you want the better answer, look at antenna options, installation limits and how often you genuinely need the radio in each setting. Get those right and the rest becomes much easier. If you are still weighing it up, keep it practical – buy for the way you use CB now, not the setup you might use once or twice a year. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/mobile-cb-vs-base-station/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/mobile-cb-vs-base-station/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/mobile-cb-vs-base-station/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/mobile-cb-vs-base-station/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mobile%20CB%20vs%20Base%20Station%3A%20Which%20Fits%20Best%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fmobile-cb-vs-base-station%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/mobile-cb-vs-base-station/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/mobile-cb-vs-base-station/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/mobile-cb-vs-base-station/?share=telegram) - **Categories:** Uncategorised --- ### [CB Power Supply for Homebase: What to Buy](https://cbradio.co.uk/cb-power-supply-for-homebase/) **Published:** April 28, 2026 **Author:** **Excerpt:** Choosing a CB power supply for homebase? Learn what amperage, voltage, regulation and noise control matter for a reliable base station setup. **Content:** A homebase CB setup usually starts with the radio and aerial, but the part that often decides how well everything behaves is the [power unit](https://cbradio.co.uk/product-category/power-supplies-and-inverters/). Pick the wrong CB power supply for homebase use and you can end up chasing odd faults – audio buzz, unstable output, overheating, or a set that never really performs as it should. Get it right and your station is quieter, more dependable and far easier to live with. For most UK CB users, the basic job is simple enough. Your radio wants a steady 13.8V DC supply, and your mains supply at home obviously does not provide that directly. The power supply sits in the middle, converting and regulating the power so your rig sees the sort of voltage it would normally get in a vehicle. That sounds straightforward, but there are a few details that make a real difference. ## Choosing a CB power supply for homebase use The first thing to check is current rating. Most standard 27MHz CB radios do not need huge amounts of current, but they still need enough when transmitting. A compact FM set may only draw a modest amount on receive and a few amps on transmit, while larger multimode radios or sets with extra features can ask for more. If you size the supply too tightly, it may cope on receive but struggle when you key up. As a rule, it is better to allow some headroom rather than buy right on the limit. If your radio draws 4A or 5A at peak transmit, a supply rated comfortably above that is the sensible choice. That extra margin helps with stability, keeps the supply working less hard and gives you a bit of flexibility if you later add an [extension speaker](https://cbradio.co.uk/product-category/extension-speakers/) with powered accessories, a preamp, or simply change to a different radio. Voltage matters just as much. CB radios are generally designed around 13.8V DC, not just any 12V source. A poor supply that sags under load can affect transmit performance and, in some cases, cause odd behaviour from the radio itself. You want a regulated output that stays consistent whether the set is idling on receive or working during a long overs. ## Linear or switch mode? This is where the choice becomes less about theory and more about how you use your station. Linear power supplies have long been popular with radio users because they are typically quiet in electrical terms. They are often heavier and bulkier, but they have a reputation for clean output and low RF noise. For a fixed homebase station where the supply is going to sit on a desk or shelf and stay there, that can be a strong point. Switch mode supplies are smaller, lighter and usually more efficient. They can be a very practical option, especially if space is limited. The trade-off is that some switch mode units can introduce electrical noise if they are poorly designed or badly matched to the installation. A decent radio-grade unit can work very well, but this is one of those areas where buying purely on the cheapest price often leads to disappointment. If your setup is in a quiet rural location and you want to hear weak stations, background electrical noise soon becomes irritating. In that case, many users still lean towards linear designs. If bench space matters more and you want a tidy, compact station, a good switch mode unit may be the better fit. It depends on the radio, the rest of the installation and how sensitive you are to noise. ### Why noise control matters more than people expect Power supply noise does not always announce itself dramatically. Sometimes it is a faint hash across the speaker, sometimes a pulsing background sound, and sometimes interference that only appears on certain channels or when other equipment in the shack is powered up. People often blame the radio or aerial first, when the supply is the culprit. A proper CB power supply for homebase operation should be built with radio use in mind, not treated like a generic bench supply bought for convenience. There is a difference. Radio users need stable voltage, sensible protection, and as little unwanted electrical noise as possible. Saving a few pounds on a non-specialist unit can cost more time in fault-finding later. ## How much amperage do you actually need? For a basic legal UK CB setup, many users will be well served by a modest regulated supply with enough output for the radio and a bit in reserve. If you are running a standard 4W FM or AM set, you do not need an oversized monster supply just for the sake of it. Bigger is not always better if it takes up unnecessary space and adds cost without any benefit. That said, if you run a multimode radio, a larger chassis set, or equipment with a higher peak current draw, stepping up to a stronger supply makes sense. The same applies if you want future upgrade room. Many homebase stations start simple, then grow. A different rig arrives, an accessory gets added, or the user moves from casual local chat to a more involved station setup. The practical answer is to buy for what you use now, plus sensible headroom for tomorrow. Not massive overkill, just enough breathing room so the supply is not working flat out. ## Features worth having on a homebase supply Protection is not glamorous, but it matters. Short circuit protection, overload protection and over-voltage protection are all worth having. If something goes wrong with wiring, connectors or the radio itself, a decent supply offers some insurance against bigger damage. Meters are useful too. Voltage and current displays are not essential for every user, but they make fault-finding much easier. If a radio suddenly behaves oddly, being able to see what the supply is doing is handy. Cooling also deserves attention. Some supplies use fan cooling, some rely more on heatsinks. Fans can be effective, but they also add noise in the room and are another part that can fail over time. Output terminals should be solid and easy to work with. It sounds basic, but loose or awkward terminals are a nuisance, especially if you are making a tidy permanent station. Good connections reduce voltage drop and help avoid intermittent faults. ### Don’t overlook cable quality Even with a good supply, poor wiring between the supply and radio can let the whole setup down. Thin cable, weak plugs or tired fuse holders can cause voltage loss and unreliable performance. Keep the run sensible, use suitable cable, and make sure all connections are tight and clean. This is especially relevant if the radio seems fine on receive but dips or resets on transmit. The supply itself may be perfectly capable, but the path between supply and radio is introducing the problem. ## Matching the power supply to your station Not every homebase station is the same. A simple desk setup in a spare room has different needs from a workshop station, garage install or off-road planning base where extra equipment may be used around the radio. Think about where the supply will sit, how much ventilation it has, and what else shares the mains circuit. If you are building a quiet indoor station for regular evening use, lower audible fan noise and low RF noise may be high priorities. If the station lives in a practical work area and gets switched on and off regularly, you may care more about toughness and convenience. Neither approach is wrong. The right choice depends on the real-world job. It is also worth being honest about future plans. If you know you are likely to stick with a straightforward legal CB setup, buy accordingly. If you regularly experiment with different radios and accessories, choose a supply with a bit more capacity and flexibility from the outset. ## Common mistakes when buying a CB power supply for homebase The most common mistake is buying on headline price alone. A cheap supply that runs hot, generates noise or cannot maintain voltage under load is no bargain. The second mistake is assuming all 12V supplies are equally suitable for radio work. They are not. Another regular issue is underestimating transmit current. Some people look only at receive draw or choose a supply with no proper margin. The setup appears to work until they actually use it properly. Then the faults begin. There is also the opposite mistake – buying far bigger than necessary without considering size, heat, fan noise or cost. Finally, many users overlook the station as a whole. The supply, cable, [connectors](https://cbradio.co.uk/product-category/plugs-and-connectors/), radio and aerial system all need to work together. If one part is poor, the rest of the setup can be dragged down by it. ## Buying with support in mind For specialist gear, proper advice still counts. If you are unsure whether a supply suits a particular rig, or whether a compact switch mode model is a better fit than a heavier linear unit, it helps to buy from people who actually understand CB installations. That is particularly true if your setup mixes homebase use with radio gear you may also move into a vehicle or 4×4 from time to time. A specialist retailer such as CB Radio UK can usually point you towards a sensible match based on the radio you use, the current it needs and the sort of station you want to build. That is often more useful than guessing from generic specifications alone. A good homebase station should feel dependable every time you switch it on. If your power supply is stable, quiet and correctly matched, the rest of the setup has a far better chance of doing its job properly – and that makes every contact a bit less frustrating and a lot more enjoyable. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-power-supply-for-homebase/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-power-supply-for-homebase/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-power-supply-for-homebase/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-power-supply-for-homebase/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Power%20Supply%20for%20Homebase%3A%20What%20to%20Buy&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-power-supply-for-homebase%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-power-supply-for-homebase/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-power-supply-for-homebase/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-power-supply-for-homebase/?share=telegram) - **Categories:** Uncategorised --- ### [Choosing a CB Extension Speaker for Car Use](https://cbradio.co.uk/cb-extension-speaker-for-car-use/) **Published:** April 27, 2026 **Author:** **Excerpt:** Find the right cb extension speaker for car use with practical advice on sound, mounting, power handling and what suits 4x4s, vans and daily drivers. **Content:** If you have ever missed a call because your engine, tyres and road noise drowned out the radio, you already know why a CB extension speaker for car use can make a real difference. A decent CB set is only half the job. If you cannot hear it clearly when you are on the move, especially in a 4×4, van or working vehicle, the setup is not doing what it should. A lot of [mobile installs](https://cbradio.co.uk/cb-radio-manuals/) place the radio in a practical rather than ideal spot. Under the dash, low in the centre console, tucked into a cubby, or mounted out of the way to save cabin space – all sensible choices, but none of them help audio. The built-in speaker on many CB radios is fine in a quiet vehicle at low speed. Add motorway pace, mud terrains, roof bars, diesel clatter or a hardtop with plenty of echo, and that little internal speaker starts to struggle. ## Why a CB extension speaker for car setups matters An external speaker solves a simple problem. It moves the sound closer to your ears and often gives you clearer, sharper audio than the radio can manage on its own. That matters whether you are following a green lane convoy, keeping in touch between vehicles on a shoot, or using CB for day-to-day road updates. The benefit is not always more volume on its own. Better clarity is usually the bigger gain. A speaker mounted higher up in the cabin can make speech easier to understand without forcing you to run the volume flat out. That is useful in noisy vehicles, but it is just as useful in a normal car where the radio is mounted low and partially blocked by trim. For off-road users, it becomes even more relevant. Bouncing around on rough ground is not the best time to lean forward and work out what someone just said over a muffled speaker grille. Clear audio saves repeat calls and keeps the group moving. ## What to look for in a CB extension speaker for car use Not every extension speaker suits every vehicle. On paper they can seem similar, but the way they perform in a small hatchback compared with a Defender, pickup or lorry cab can be very different. ### Sound profile and speech clarity CB audio is about voice, not hi-fi. You are not buying a music speaker. The best option is one that handles spoken communication well, with crisp mids and enough top-end detail to cut through road noise. Some speakers sound loud but muddy. Others are smaller and less powerful on paper, yet easier to understand in real-world use. That is why sheer wattage is not the whole story. A speaker rated for more power may suit a louder cab, but if the tone is too dull or boomy, speech can still get lost. Clear voice reproduction should come first. ### Size and mounting position Where you plan to fit the speaker usually decides what size makes sense. A larger unit can move more air and may sound fuller, but there is no point choosing one that ends up awkwardly mounted against your knees or buried behind trim. Smaller compact speakers are often the better answer in modern vehicles where space is tight. In older 4x4s and commercial cabs, you may have more flexibility. A dash top, bulkhead, roof lining edge or upper centre area can all work well if the speaker is secure and aimed properly. ### Impedance and compatibility Most CB extension speakers are designed to work with standard [mobile CB radios](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/), but it is still worth checking compatibility. The speaker impedance should match what the radio expects, and the connector type should suit the radio’s external speaker socket. In most cases this is straightforward, though it is one of those details that catches people out when mixing older gear with newer equipment. ### Build quality Vehicle interiors are harsher than they look. Heat, vibration, dust and damp all take their toll over time. A budget speaker may do the job in a light-use car, but if you are fitting out a working 4×4 or regularly driving rough tracks, sturdier casing and decent mounting hardware are worth paying for. ## Where to mount an extension speaker in the car Mounting matters just as much as the speaker itself. Even a good speaker can sound poor if it fires into carpet, plastic trim or the back of a seat. ### High and facing you is usually best The closer the sound is to ear level, the easier it is to understand. Under-dash mounting is common because it is convenient, but it often throws sound at your shins. If possible, mount the speaker higher and angle it towards the driver. That can mean lower A-pillar trim, a dash shelf area, overhead console position, or a solid point on the centre section of the dash. ### Avoid hidden mounting People sometimes mount extension speakers out of sight for a cleaner look. It can work, but hidden placement usually costs you audio performance. Behind trim panels, inside closed compartments or deep in footwells, clarity drops quickly. ### Think about passengers and other equipment If the vehicle carries passengers regularly, or has switch panels, mobile phone cradles, extra gauges or off-road accessories fitted, the ideal speaker location may already be busy. In that case, aim for the best compromise rather than the neatest possible spot. A speaker you can actually hear is the point. ## Different vehicles, different answers There is no single best CB extension speaker for car installations because vehicle noise and cabin shape vary so much. A small family car with decent sound deadening may only need a compact speaker mounted slightly higher than the radio. A panel van often needs more output because of the larger, noisier cabin. A 4×4 with aggressive tyres and extra accessories can benefit from both better positioning and a more capable speaker, especially if the radio itself is mounted out of the way. Soft-top and older utility vehicles are their own category. They can be brutally noisy at speed, and a weak speaker will simply disappear into the background. In those cases, it often makes sense to prioritise efficiency, stronger output and firm mounting over cosmetics. ## Common mistakes when buying The first mistake is assuming the radio is at fault when the real issue is speaker placement. Many decent CB radios sound poor only because the built-in speaker is firing into the wrong part of the cabin. The second is buying on size alone. Bigger is not always better if it leaves you with nowhere sensible to fit it. The third is treating every speaker as the same. Some are built for compact convenience, some for higher output, and some strike a balance. It depends on your vehicle and how you use it. Another common issue is cable routing. A speaker may work well [once fitted](https://cbradio.co.uk/product-category/tools/), but if the cable is stretched, trapped under trim or left dangling across the cabin, it soon becomes a nuisance. Plan the route before you mount anything permanently. ## Is an extension speaker always worth it? Not always. If your CB radio is mounted high up, your vehicle is quiet, and the built-in speaker is already clear, an external speaker may not add much. Some modern installs are tidy and effective without one. But plenty of mobile setups are compromised by space. If the radio is under the dash, inside a DIN slot, in a cubby, or mounted for convenience rather than ideal listening, an extension speaker is often one of the simplest upgrades you can make. It is usually cheaper and easier than replacing the whole radio, and the result is immediate. For regular users, that matters. If you rely on CB for convoy work, site access, off-road trips or road chat with other drivers, clear audio is not a luxury. It is part of having a usable setup. ## Getting the right setup first time The best approach is to think about the whole install rather than the speaker in isolation. Consider where the radio sits, how noisy the vehicle is at speed, where your ears are in relation to the dashboard, and whether the cabin is likely to get muddy, damp or knocked about. Once you know those answers, the right speaker choice becomes much easier. That is where specialist stock and proper product knowledge help. A general electronics shop may sell a speaker. A proper CB supplier understands why one model suits a compact road car while another makes more sense in a working Land Rover or van. That difference is often what saves you buying twice. If you are unsure, keep it simple. Aim for a speaker with clear voice reproduction, solid mounting, suitable compatibility and a location that points the sound where you actually need it. CB Radio UK deals with these setups every day, so if you need a straight answer on what suits your vehicle, ask before you fit. A good mobile radio setup should work without effort. When calls come through clearly the first time, you stop fiddling with the volume and get on with the drive. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-extension-speaker-for-car-use/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-extension-speaker-for-car-use/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-extension-speaker-for-car-use/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-extension-speaker-for-car-use/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Choosing%20a%20CB%20Extension%20Speaker%20for%20Car%20Use&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-extension-speaker-for-car-use%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-extension-speaker-for-car-use/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-extension-speaker-for-car-use/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-extension-speaker-for-car-use/?share=telegram) - **Categories:** Uncategorised --- ### [Best CB Aerial for Truck: What to Choose](https://cbradio.co.uk/best-cb-aerial-for-truck/) **Published:** April 26, 2026 **Author:** **Excerpt:** Looking for the best cb aerial for truck use? Learn which aerial type, length and mount suit your setup, driving routes and radio performance. **Content:** A CB that sounds poor on the road is often blamed on the radio, when the real issue is the aerial. If you are trying to find the best cb aerial for lorry use, the right answer depends less on brand hype and more on how your vehicle is used, where you mount it, and what compromises you can live with day to day. For some drivers, the best choice is a tough, shorter aerial that survives low branches, loading bays and regular knocks. For others, it is a longer whip that gives stronger performance across open roads. The trick is choosing an aerial that suits the vehicle as much as the radio. ## What makes the best CB aerial for lorry use? The best aerial is not simply the longest or most expensive one on the shelf. On a working vehicle, you need a setup that performs well enough to give clear local contact, while still being practical for real-world use. Length matters because, in simple terms, longer CB aerials usually perform better than very short ones. They tend to transmit and receive more efficiently, which can mean better range and cleaner signals. The downside is obvious. A long aerial on a lorry or pickup can catch on trees, barriers, warehouse roofs and anything else above cab height. Mounting position matters just as much. An average aerial mounted properly will often outperform a better aerial mounted badly. Ideally, you want the aerial high up, in the clear, with a solid earth if the mount requires one. If it is tucked behind bodywork, hidden low down, or installed with poor grounding, performance will suffer. Then there is build quality. Aerials used on commercial vehicles and off-road lorries need to cope with vibration, weather, road dirt and repeated flexing. Cheap fibreglass sticks and bargain mounts can work, but they do not always stay reliable for long. ## The main aerial types to consider Most lorry and 4×4 users end up choosing between a springer, a fibreglass aerial, or a stainless steel whip. Each has its place. ### Springer aerials Springer aerials remain popular because they look the part and can take a knock. The spring at the base helps absorb impacts, which is useful if you are driving under branches or working in mixed environments. They are often a sensible option for pickups, off-roaders and some commercial vehicles where durability matters as much as outright performance. The trade-off is that not every springer performs equally well. Some are built well and tune easily. Others are chosen mostly for appearance. If you want a springer, buy on proven performance and construction quality, not just looks. ### Fibreglass aerials Fibreglass aerials are common on mobile CB setups because they are sturdy, tidy and easy to live with. Many users like them for side mounts, mirror mounts and body-mounted installations. They can be a good middle ground if you want something tougher than a thin whip but neater than a very long aerial. That said, fibreglass models vary a lot. Some are excellent all-rounders. Some are more of a compromise choice where convenience wins over maximum range. For many lorry users, that is perfectly acceptable. ### Stainless steel whips A good stainless whip often gives excellent performance, especially when there is enough room to mount it properly. They are simple, effective and widely respected by experienced CB users. If your vehicle and routes allow for the length, a whip is often hard to beat. The issue is practicality. A long whip can be awkward on taller vehicles and less forgiving around obstacles. On a vehicle that spends time in urban areas, depots or wooded tracks, what works brilliantly on the open road may become a nuisance by the end of the week. ## Matching the aerial to the vehicle When people ask for the best cb aerial for lorry setups, they are often asking the wrong question. Start with the vehicle type and working conditions, then narrow the aerial choice from there. A highway-driven lorry that spends most of its time on open roads can usually carry a longer aerial than a tipper, site vehicle or off-road pickup. A green laning 4×4 might need something more flexible and damage-resistant because branches and uneven ground are part of the job. A farm lorry may benefit from a setup that is easy to replace or adjust without fuss. If the vehicle enters height-restricted areas every day, an extra few inches of aerial can matter more than people think. If it is mainly used convoy-style off-road, ruggedness and consistent short-to-medium range contact may be more valuable than chasing the last bit of distance. This is why there is no one-size-fits-all winner. The best aerial on paper may not be the best aerial for your routes. ## Mounting position can make or break performance Aerial choice gets plenty of attention, but mounting is where many installations go wrong. A well-made mount, properly fixed and properly earthed where needed, is essential. Higher is generally better. Roof-level mounting often helps because the aerial sits more in the clear. On many lorries and 4x4s, though, the ideal roof-centre position is not realistic. You may be using a mirror mount, gutter mount, body bracket or rear mount instead. These can all work well, but they change how the aerial behaves. If the aerial is mounted low down beside a lot of metalwork, the radiation pattern can become uneven. In plain terms, the signal may favour one direction over another. That is not always a disaster, but it is worth knowing. Vehicles are compromises, and the best result usually comes from making the smartest compromise rather than chasing a perfect install that cannot be achieved. Mag mounts can be handy for some mobile users, but on a lorry or serious 4×4 they are not always the best long-term answer. Permanent or solid bracket mounting is usually more dependable where vibration, weather and repeated use are concerned. ## Tuning matters more than many buyers expect Even the best aerial will disappoint if it is not tuned correctly. SWR needs checking after installation, and ideally after any major change in mount position, cable routing or vehicle setup. A poorly tuned aerial can lead to weak performance and, in some cases, put unnecessary strain on the radio. Many drivers put up with poor transmit and receive quality for months because they assume that is normal. Often, a proper tune transforms the setup. This is one reason [specialist retailers](https://Www.cbradio.co.uk/about-us/) still matter. Buying the right aerial is only half the job. Knowing how to mount it, earth it and tune it properly is what gets the result you actually want. That is where a specialist such as CB Radio UK earns its keep. ## So which aerial is best? If you want the strongest all-round performance and have space to use it, a quality longer whip is usually the benchmark. If you need a tougher everyday option for mixed driving, a well-made springer is often the better balance. If you want a clean, durable and practical setup with fewer day-to-day hassles, a decent fibreglass aerial can be the right fit. For many users, there are really three questions. How much height can you live with? Where can you mount it properly? And do you want maximum performance or the best compromise for daily use? A driver doing long road miles may happily accept a larger aerial because the extra performance is worth it. A site vehicle, off-road lorry or utility 4×4 may be better served by something shorter and more forgiving. Neither choice is wrong if it suits the job. ## A sensible way to buy your next aerial Ignore claims that one aerial is automatically the best for every lorry. Look at your vehicle, your mount options, the sort of routes you drive, and how much abuse the aerial is likely to take. Then buy the best quality version of that type you can. It is usually smarter to fit a good mid-length aerial properly than to fit a long high-performance one badly. It is also smarter to choose an aerial you can live with every day than one that annoys you enough to remove it after a fortnight. If you are unsure, ask before you buy. A few minutes spent [matching the aerial](https://cbradio.co.uk/product-category/cb-aerials/) to the vehicle can save a lot of wasted money and poor radio performance later. The best setup is the one that works reliably when you are actually out on the road, not the one that only sounds good in a product description. Choose for your vehicle, [fit it properly](https://cbradio.co.uk/cb-radio-manuals/), tune it carefully, and your CB will have a far better chance of doing what it should – giving you clear, dependable communication when you need it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-aerial-for-truck/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-aerial-for-truck/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-aerial-for-truck/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-aerial-for-truck/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Best%20CB%20Aerial%20for%20Truck%3A%20What%20to%20Choose&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-aerial-for-truck%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-aerial-for-truck/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-aerial-for-truck/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-aerial-for-truck/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio Manuals Online: What to Check](https://cbradio.co.uk/cb-radio-manuals-online/) **Published:** April 25, 2026 **Author:** **Excerpt:** Find cb radio manuals online and learn what to check before setup, wiring, programming and fault-finding on UK mobile and homebase CB radios. **Content:** A used rig turns up in the post, the box has seen better days, and the printed booklet is nowhere to be found. That is usually the moment people start searching for cb radio manuals online. Whether you are fitting a mobile set in a 4×4, bringing an older homebase unit back to life, or trying to sort out a [microphone wiring](https://cbradio.co.uk/product-category/plugs-and-connectors/) issue, the manual is often the difference between a quick fix and an afternoon of guesswork. The trouble is not every manual is equally useful, and not every radio setup needs the same level of detail. Some users only need a channel chart and basic controls. Others need wiring diagrams, menu functions, power requirements, or clarification on regional settings. If you know what to look for, online manuals can save time, prevent damage, and help you get much better performance from the equipment you already own. ## Why cb radio manuals online still matter A lot of CB radios are straightforward once you know the controls, but straightforward does not mean identical. Different makes and models handle squelch, RF gain, scan functions, PA modes, microphone pin-outs, and power connections in different ways. Even radios that look similar on the front panel can behave very differently once you start changing settings. That matters even more with second-hand equipment. Plenty of good radios stay in service for years, especially in working vehicles, off-road builds, and homebase stations. The downside is that paperwork gets lost. If you are buying older kit, inheriting a setup from a previous owner, or swapping a radio between vehicles, finding the correct manual online is often the first sensible step. There is also a safety angle. A manual can confirm the correct supply voltage, fuse rating, microphone type, and installation method. That helps avoid common mistakes such as using the wrong power source, wiring the mic incorrectly, or mounting the radio where heat build-up becomes a problem. ## What a good CB manual should actually include The best manuals do more than name the knobs on the front. They explain how the set is meant to be used in the real world. For a mobile user, that means power input details, aerial matching guidance, external speaker connections, and any menu options that affect day-to-day operation. For a homebase setup, you may be looking more closely at power supply requirements, external meter use, and operating modes. A useful manual should clearly show the control layout, microphone socket details, and rear panel connections. It should also explain less obvious functions such as local and DX settings, dual watch, memory channels, and any channel band selection if the model supports it. On some rigs, these features are buried behind button combinations that are easy to miss without proper instructions. Exploded diagrams and parts lists can be handy too, but they are not essential for every user. If you are simply trying to get back on air, operating instructions and wiring information matter far more than service-level drawings. If you repair radios, that balance shifts, and a basic owner manual may not go far enough. ## Finding the right cb radio manuals online The first job is making sure the manual actually matches your exact model. That sounds obvious, but many radios share near-identical names, and a single product line may include UK, EU, or export variants with different functions. A suffix on the model number can make a real difference. If the front panel says one thing and the manual says another, stop there and double-check. Look at the radio itself before you download anything. Check the model badge, the rear label, and any serial or version information. If the radio has a multimode switch, menu system, or unusual mic socket, compare those features with the manual images. A close match is not always good enough when it comes to wiring or programming. PDF manuals are generally the easiest format to use because they can be stored on a phone, tablet, or workshop computer. That said, scan quality varies. Some older manuals are perfectly readable, while others are little more than a blurry photocopy. If you rely on the mic wiring diagram or fine-print specifications, poor scans can be more frustrating than having no manual at all. ## Where manuals help most in day-to-day use For many owners, the manual earns its keep during installation. It tells you which lead is positive, where the inline fuse should sit, what the mounting bracket clearance needs to be, and whether an [extension speaker](https://cbradio.co.uk/product-category/extension-speakers/) can be added. That is particularly useful in tighter vehicle installs where space behind the dash is limited. The second big area is setup. If your radio has more than the basic volume and squelch controls, the manual helps you get the set working properly instead of half-working. RF gain set wrongly, ANL or NB functions misunderstood, or scan features left active can all make a radio seem faulty when it is simply configured badly. Then there is fault-finding. No transmit audio, weak receive, odd channel behaviour, or a dead front panel do not always mean the radio is finished. Sometimes it is a blown fuse, an incorrect mic, a wrong menu setting, or a power supply issue. A proper manual can narrow that down quickly. ## The limits of online manuals Manuals are useful, but they are not magic. If a radio has an internal fault, a PDF will not repair it. The same goes for poor aerial performance caused by bad earthing, damaged coax, or a badly positioned mount. Plenty of users blame the radio when the real issue sits outside it. Older manuals can also be vague by modern standards. Some assume a level of product knowledge that new users simply do not have. A line such as “adjust SWR before operation” is not much help if nobody explains what SWR is, how to measure it, or why it matters. That is where specialist advice still counts. There is also the matter of legality and regional configuration. Some radios cover more than one market, and manuals may describe functions that are not relevant to UK users or should not be used in a given setup. If you are unsure about channel standards, power settings, or what a particular mode does, getting proper guidance is better than guessing from a partial scan. ## Manuals, wiring guides and real support This is where a specialist retailer earns its place. A manual gives you the official layout of the radio, but practical support fills in the gaps the booklet leaves behind. That might mean confirming which microphone suits a specific set, checking compatibility with a particular aerial, or working out whether a problem is in the radio, the installation, or the accessories. For example, a user fitting a CB into a Defender, pickup, or touring 4×4 often has more to think about than the handbook suggests. Power routing, mounting position, external speaker placement, aerial height, and grounding all affect performance. The radio manual may mention basic installation, but it rarely tells you what works best in a vehicle packed with off-road kit. The same applies to homebase users. A manual might show the DC input and a few controls, but it may not help much when choosing the right [power supply](https://cbradio.co.uk/product-category/power-supplies-and-inverters/) or sorting noise issues in the shack. If the aim is dependable communications rather than just switching the set on, real-world product knowledge matters. That is why practical reference content remains useful alongside manuals. Mic wiring information, CB codes, setup advice, and direct support save time because they address the questions manuals often skip. For many users, that combination is better than any single PDF. ## How to use a manual without overcomplicating things Start with the basics. Confirm power requirements, microphone type, channel selection, and the core controls needed to receive and transmit. Once the radio is live and stable, move on to the extra functions. Trying to learn every menu option before you have checked the aerial, supply, and mic usually slows the whole job down. Keep the manual accessible on your phone or print the pages you use most. For mobile installs, the useful pages are often the wiring diagram, bracket dimensions, microphone pin-out, and control guide. For a base station, you may care more about rear connections, mode selection, and any meter or speaker sockets. If something in the manual does not match the radio in front of you, do not force it. That is usually the sign of a version mismatch or a previous modification. The right answer then is to verify the model and ask for proper advice, not to keep experimenting with wiring and settings until something gives. A good manual helps you use the gear properly, but it should also make you more confident about when to stop and check. That is often what keeps a simple setup simple. If you are searching for cb radio manuals online, treat them as a practical tool rather than a box-ticking exercise. Get the right one, use it to confirm the essentials, and back it up with proper product knowledge when the setup gets more involved. That approach saves time, avoids expensive mistakes, and gets you on air with far less fuss. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-manuals-online/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-manuals-online/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-manuals-online/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-manuals-online/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Manuals%20Online%3A%20What%20to%20Check&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-manuals-online%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-manuals-online/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-manuals-online/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-manuals-online/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio 10 Codes UK Explained](https://cbradio.co.uk/cb-radio-10-codes-uk/) **Published:** April 24, 2026 **Author:** **Excerpt:** Learn cb radio 10 codes uk users still hear today, what they mean in practice, and when plain English is the better choice on the air. **Content:** If you have ever heard someone call out a quick “10-4” on air and wondered whether there is a full set of cb radio 10 codes uk users still follow, the short answer is yes – but with a few caveats. In the UK, 10 codes are still recognised by plenty of CB users, especially long-time operators, off-road groups and drivers who like tidy, efficient radio chatter. That said, not every code is used the same way, and plain English is often the better option when clarity matters. ## What are CB radio 10 codes? CB 10 codes are short numerical phrases used to speed up radio conversations. Instead of saying a full sentence, an operator gives a code beginning with “10”, followed by another number. The idea is simple: quicker transmissions, less waffle, and less chance of talking over each other. They came from professional radio use and crossed over into CB culture years ago. Some codes became widely known, while others stayed patchy and depended on where you were, who you were talking to, and what sort of radio crowd you were in. That is still true now. For UK users, it helps to think of 10 codes as useful shorthand rather than a strict national rulebook. If you are chatting with a local 4×4 group, a convoy, or a few experienced operators on a regular channel, shared codes can work well. If you are calling out to unknown stations, plain English may save time. ## Common cb radio 10 codes uk users should know Some 10 codes have stuck because they are practical and easy to remember. You do not need to memorise dozens. A small working set covers most everyday CB use. ### The best-known codes 10-1 usually means receiving poorly, or your signal is weak and difficult to copy. If someone says you are “10-1”, they are telling you your audio is not getting through cleanly. 10-2 means receiving well. It is the opposite of 10-1 and a handy quick check if you are testing a new radio, microphone or aerial setup. 10-4 is the one almost everybody knows. It means message received or understood. On a busy channel it is a simple way to acknowledge without adding extra chatter. 10-7 generally means out of service or leaving the air. Some users say it when they are switching off or no longer monitoring. 10-8 means in service or back on air. If a mate has gone quiet while refuelling or adjusting kit, they may come back with 10-8. 10-9 means repeat your last transmission. This is useful when static, road noise or distance has made part of a message unreadable. 10-20 is one of the most useful of the lot. It asks for or gives location. “What’s your 10-20?” is still heard regularly, especially among mobile users and convoy traffic. ### Other codes you may still hear 10-13 can refer to weather or road conditions, depending on the operator. This is one of those codes where context matters. 10-21 means make contact by telephone. Less common now than it once was, but still recognised by many older operators. 10-33 is often used to indicate emergency traffic or urgent radio traffic. Because meanings can vary, this is one area where plain language is often safer. 10-36 can mean the correct time. Again, not an everyday code for most casual users, but not unheard of. 10-77 is sometimes used to mean estimated time of arrival. You are more likely to hear it in organised groups than on general chat. 10-100 usually means a comfort break. It is one of those codes that survives because it is quick, familiar and slightly tongue-in-cheek. ## Why 10 codes are not always consistent This is where beginners can get caught out. There is no single perfect UK-wide list that every CB operator uses in exactly the same way. Some codes came from different radio services. Some were adopted from American CB culture. Some were passed around local groups and changed over time. That does not make them useless. It simply means you should treat them as shared shorthand, not law. If you are speaking with the same group regularly, you will soon work out which codes they use and what they mean on that channel. For anyone setting up a new mobile install, especially in a 4×4 or working vehicle, this matters. Radio communication works best when the message is instantly clear. If there is any doubt, skip the code and say the message plainly. ## When to use 10 codes and when to avoid them 10 codes work well in short, routine traffic. Radio checks, convoy spacing, quick acknowledgements and location calls are good examples. In these cases, shorthand keeps transmissions neat and leaves the channel clearer for everyone else. They are less useful when dealing with detailed directions, technical faults, safety issues or mixed groups where not everyone knows the codes. If someone is new to CB, or if conditions are rough and signals are poor, plain English will usually be more effective. There is also the simple fact that modern CB use in the UK is mixed. Some operators enjoy the old-school language and culture. Others want straightforward communication with no jargon at all. Neither approach is wrong. It depends on the channel, the group and the job at hand. ## CB radio 10 codes UK off-road groups still find useful Off-road and green-laning groups often prefer quick, repeatable communication. When several vehicles are moving through woodland, across uneven ground or on a road section between sites, long transmissions are a nuisance. Short codes and agreed phrases help keep things tidy. In that setting, 10-4, 10-9 and 10-20 are probably the most useful. A quick acknowledgement, a request to repeat, or a check on position can keep the group moving without clogging the channel. Some groups also add their own plain-English calls for hazards, gates, boggy ground or recovery stops. That combination usually works best. Use a few familiar codes for speed, but keep critical information clear and direct. If a vehicle is stuck, if someone is off route, or if there is a safety issue, say exactly what is happening. ## Getting the basics right matters more than memorising codes A lot of new users spend too much time looking for the perfect code list and not enough time sorting the actual radio setup. Good communication starts with reliable kit, proper installation and a sensible operating style. If your aerial is poorly mounted, your SWR is off, or your [microphone audio](https://cbradio.co.uk/product-category/cb-radio-accessories/cb-radio-microphones/) is weak, knowing twenty 10 codes will not help much. You need clean transmit audio, decent receive quality and a setup suited to the vehicle or base location. For mobile users, [aerial choice](https://cbradio.co.uk/product-category/cb-aerials/) is often the biggest factor. A short magnetic mount may be convenient, but it will not always perform like a well-installed body mount with a properly matched antenna. For homebase use, placement and power supply quality matter just as much. The code you use is secondary to whether the other station can actually hear you. That is one reason specialist retailers such as CB Radio UK remain useful to buyers who want more than a box off a shelf. Matching the radio, aerial and accessories to the way you actually use them usually makes a bigger difference than any list of radio slang. ## A sensible way to learn CB 10 codes The best approach is not to cram every code at once. Start with the ones you are most likely to hear, then listen to how they are used on air. If you are joining a local group, ask what they actually use rather than relying on a random list. A practical starter set would be 10-2, 10-4, 10-7, 10-8, 10-9 and 10-20. Those cover signal reports, acknowledgement, leaving and returning, repeat requests, and location. That is enough for most routine CB use in the UK. After that, add more only if they genuinely help. There is no prize for sounding like a codebook. Good operators are clear, brief and easy to understand. ## Plain English is still good radio practice There is sometimes a temptation to treat CB language as part of the hobby identity. Fair enough – the culture is part of the fun. But from a practical point of view, the best radio operators know when not to use jargon. If you are calling for assistance, guiding another driver through a tight lane, coordinating a stop, or speaking to stations you do not know, plain English is often the smart choice. It reduces mistakes and makes the channel more accessible to newer users. That matters if you want CB to stay useful rather than just nostalgic. A radio is a working tool as much as a pastime. The clearer the channel sounds, the more likely people are to keep using it. ## Are 10 codes still worth knowing? Yes – as long as you keep them in proportion. They are part of CB history, still heard on UK channels, and genuinely useful in the right situation. They can make routine traffic quicker and cleaner, particularly among regular users who understand the same shorthand. Just do not assume everyone uses the same list. If there is any chance of confusion, speak plainly and keep the message short. That approach works whether you are running a simple starter kit in a pickup, a full mobile setup in a 4×4, or a homebase station with a decent external aerial. If you are [new to the hobby](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/), learn a handful of common codes, listen carefully, and build from there. Clear audio, a well-installed setup and a bit of operating sense will take you further than a long list of numbers ever will. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-10-codes-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-10-codes-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-10-codes-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-10-codes-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%2010%20Codes%20UK%20Explained&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-10-codes-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-10-codes-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-10-codes-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-10-codes-uk/?share=telegram) - **Categories:** Uncategorised --- ### [CB Microphone Wiring Diagram Explained](https://cbradio.co.uk/cb-microphone-wiring-diagram-explained/) **Published:** April 23, 2026 **Author:** **Excerpt:** Need a CB microphone wiring diagram? Learn pin layouts, common wire colours, faults, and how to match a CB mic to your radio properly. **Content:** A replacement mic turns up, the plug looks right, and then nothing happens when you key up. That is usually the point where you need a proper CB microphone wiring diagram, not guesswork. On CB gear, especially older sets, different brands and models can use the same style of plug with completely different pin functions, so one wrong connection can leave you with no transmit, no audio, or a radio stuck on receive. For anyone running a mobile set in a 4×4, car, van or lorry, mic wiring matters more than it gets credit for. A CB radio can be perfectly healthy, but if the microphone is wired incorrectly the whole setup feels dead. The good news is that most microphone faults are straightforward once you know what each wire and pin is supposed to do. ## Why a CB microphone wiring diagram matters A CB microphone is not just a handset with a few wires in it. It controls key radio functions. On a basic setup, the mic needs to carry audio from your voice and switch the radio from receive to transmit when you press the PTT button. Some microphones also include up and down channel buttons, scan control or other extras, which adds more conductors and more chances for mismatch. The main problem is that there is no single universal standard across every CB radio. Two 4-pin microphones may look identical from the outside, but one could use pin 1 for audio while another uses pin 1 for transmit. The same applies to 5-pin and 6-pin arrangements. That is why matching by appearance alone is unreliable. If you are fitting a replacement mic, repairing a damaged lead, or adapting one brand of microphone to another radio, the wiring diagram is what stops it becoming trial and error. It also helps you work out whether the fault is in the mic, the lead, the plug or the radio socket. ## Understanding the basic CB microphone wiring diagram Most CB microphone wiring diagrams are built around the same core functions, even if the pin order changes. In plain terms, you are usually dealing with mic audio, transmit switch, receive switch and ground. On more complex mics, there may also be power for an electret insert or separate lines for channel controls. Mic audio is the line that carries your voice into the radio. Ground is the return path and shielding, and it is just as important as the audio conductor because a poor earth here can cause weak or noisy modulation. The PTT switch then changes the radio state. On many rigs, pressing the switch either grounds or opens a transmit line while simultaneously disconnecting the receive path. That is why a miswired plug can produce very specific symptoms. If receive works but transmit does not, the PTT wiring may be wrong. If the radio keys up but there is no speech, the audio line is the first place to check. If the set stays on transmit all the time, one of the switch lines may be permanently shorted. ## Common plug types and what changes between them In UK CB circles, the most common microphone plugs are 4-pin, 5-pin and 6-pin types. Four-pin is widespread on many traditional CB radios, but even within that group the actual pin assignment varies by manufacturer. Five-pin and six-pin plugs tend to appear where extra functions are included or where a brand followed its own wiring pattern. What catches people out is that the number of pins tells you very little on its own. A 4-pin mic for one radio cannot be assumed to suit another just because the connector fits. The same goes for aftermarket power mics, echo mics and replacement hand mics. Some are supplied with loose wires precisely because they are meant to be wired to suit the set. This is where model-specific information matters. Brand family similarities can help, but there are enough exceptions that it is still worth checking the exact radio model before soldering anything. ## Wire colours are helpful, but not a guarantee A lot of users start with wire colours, and that is fair enough. Many microphones use common colour conventions such as red, black, white and shield, but there is no rule that every maker follows the same pattern. On some imported mics, colours can differ from one production batch to another. On older second-hand microphones, previous repairs may have changed them entirely. So treat colours as a clue, not proof. The safe method is to identify each wire by testing it. A continuity meter will tell you which conductor goes to the mic cartridge, which one is linked to the screen, and which ones change state when the PTT is pressed and released. That is far more reliable than trusting colour alone. If you are working with a used mic and the cable has already been shortened or reterminated, testing is not optional. It is the only way to know what you actually have in front of you. ## How to identify the right wiring Start with the radio, not the microphone. The radio socket pinout is the fixed point, so that is what the microphone must match. Once you know what the radio expects on each pin, you can map the mic wires to suit. Next, identify the microphone functions with a meter. One pair of conductors will usually show the switching action of the PTT. Another will be the microphone audio and ground. If the mic has channel buttons, those lines will often sit separate from the basic talk functions. Take your time here. Five careful minutes with a meter is better than lifting pads or resoldering the plug twice. When soldering the plug, keep the joints neat and avoid leaving whiskers of wire that could short adjacent pins. It also helps to slide the plug cover and strain relief onto the cable before you solder. Plenty of people forget that once, usually only once. ## Faults a CB microphone wiring diagram can help you solve A wiring diagram is not just for fitting a new plug. It is one of the quickest ways to diagnose everyday microphone problems. If people can hear a carrier but not your voice, that points towards the audio side. If the radio does not change to TX when you press the PTT, the switch wiring or switch itself is suspect. If audio comes and goes when the lead is flexed, the cable may have a broken core near the plug or mic body. Intermittent faults are especially common in vehicle installs. Microphone leads get tugged, trapped, stretched and twisted. In an off-road setup, vibration adds another layer of wear. A mic can look fine from the outside and still have a fractured conductor inside the insulation. A diagram also helps when a microphone seems to work partly but not properly. For example, transmit may work but receive audio disappears after releasing the PTT. That often means the receive switching contact is not returning as it should, or the receive line is on the wrong pin. ## When adaptation is possible and when it is not Adapting one CB microphone to another radio is often possible, but not always worth doing. A standard dynamic hand mic can usually be rewired if the impedance and switching arrangement are suitable. A powered microphone may need more care, especially if it relies on a battery or expects a certain bias arrangement. Electret types can also be less forgiving if the radio was designed around a dynamic mic input. Then there is practicality. If the mic is inexpensive and the wiring is unknown, spending too long trying to force compatibility can cost more time than it saves. On the other hand, if it is a quality replacement mic or a favourite power mic, rewiring it correctly can be well worth the effort. For buyers who want to avoid hassle, [model compatibility](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/) is often the smarter route. Specialist suppliers such as CB Radio UK can usually help narrow down the [right mic](https://cbradio.co.uk/product-category/cb-radio-accessories/cb-radio-microphones/) or [plug arrangement](https://cbradio.co.uk/product-category/plugs-and-connectors/) before you start cutting and soldering. ## A careful approach saves radios and microphones The biggest mistake with any CB microphone wiring diagram is assuming one chart fits every radio with the same number of pins. It does not. The second mistake is soldering first and checking later. That is how people end up with shorted pins, dead audio or a set that keys permanently. If you are unsure, slow the job down. Confirm the radio model, confirm the socket pinout, test the mic lead and only then wire the plug. It is a small component, but the microphone is the control point for your whole CB setup. Get it right and your radio behaves exactly as it should – clear TX, proper receive switching and no surprises halfway through a run or out on the lanes. If there is one job on a CB install that rewards patience, this is it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-microphone-wiring-diagram-explained/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-microphone-wiring-diagram-explained/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-microphone-wiring-diagram-explained/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-microphone-wiring-diagram-explained/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Microphone%20Wiring%20Diagram%20Explained&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-microphone-wiring-diagram-explained%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-microphone-wiring-diagram-explained/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-microphone-wiring-diagram-explained/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-microphone-wiring-diagram-explained/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radio Antenna Tuning Guide](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/) **Published:** April 22, 2026 **Author:** **Excerpt:** CB radio antenna tuning guide for UK drivers and 4x4 users. Learn SWR basics, setup steps, common faults, and how to get a cleaner signal. **Content:** You can buy a good CB radio, fit a decent aerial, wire everything neatly, and still end up with poor range if the antenna is not tuned properly. That is why a cb radio antenna tuning guide matters – not as a box-ticking exercise, but because tuning is what turns a fitted setup into a working one. For mobile users, especially in 4x4s, pickups, plant vehicles and work vans, antenna tuning is often the difference between clear local comms and a set that sounds flat, noisy or weak. A badly tuned aerial can also put unnecessary strain on the radio. The good news is that tuning is not complicated once you understand what you are actually adjusting. ## What antenna tuning is actually doing When people talk about tuning a CB antenna, they usually mean adjusting the aerial so it works efficiently on the frequencies your radio is using. The usual way to check that is with an SWR meter. SWR stands for Standing Wave Ratio, and it tells you how well the radio, coax and antenna are matched. A perfect match is rarely the goal in the real world, especially on a vehicle. Mounting position, body shape, roof bars, spare wheels, light bars and even where the coax runs can all affect readings. What you want is a safe, sensible SWR across the channels you use, with the aerial length adjusted to bring things into line. If that sounds technical, keep it simple. High SWR means more of the transmitted signal is being reflected back instead of going out through the antenna. Lower SWR means the setup is working more efficiently. That usually gives you better performance and a happier radio. ## What you need before you start You do not need a bench full of test gear. For most installs, you need a CB radio, the [mounted antenna](https://cbradio.co.uk/product-category/cb-aerials/), a short patch lead, and an SWR meter. Some modern antennas are easier to adjust than others. A few use a grub screw and sliding whip, while others use a tunable tip. Fixed-length antennas can be less forgiving, so check the design before fitting. It also helps to tune the antenna in an open area. Avoid doing it inside a unit, under a metal canopy, or parked right next to buildings. Nearby metal can affect readings and send you chasing faults that are not really there. Before touching the antenna, make sure the installation itself is sound. The mount should be secure, the coax should not be crushed or sharply kinked, and the plug connections should be properly fitted. If the aerial mount relies on a good earth through the bodywork, that earth needs to be genuine, not just assumed. ## CB radio antenna tuning guide: the basic method Start by connecting the SWR meter between the radio and the antenna. The radio connects to the meter input, usually marked transmitter or TX, and the antenna feed goes to the antenna socket on the meter. If those are reversed, the reading will be wrong, so it is worth checking before you key up. Set the radio to channel 20 first. That is the middle of the band and gives you a useful baseline. With the meter set to calibrate or forward, key the microphone and adjust the meter as instructed until it reaches the calibration mark. Then switch the meter to SWR or reflected and key again to read the result. After that, repeat the process on channel 1 and channel 40. Those readings tell you whether the antenna is effectively too long, too short, or somewhere close. If the SWR is higher on channel 1 than on channel 40, the antenna is usually too short and needs lengthening. If the SWR is higher on channel 40 than on channel 1, the antenna is usually too long and needs shortening. If both ends are high, but channel 20 is lower, you are moving in the right direction but may still need fine adjustment. If all channels are poor, there may be an installation fault rather than a tuning issue. Make small adjustments only. A little movement at the whip or tip can make a noticeable difference. Retest after each change. Rushing this part is where many people go wrong. ## What counts as a good SWR reading? For everyday CB use, many installers are happy once the reading is low enough to be safe and practical rather than obsessing over perfection. Around 1.5:1 is very good on a mobile setup. Up to 2:1 is often workable, though lower is better if you can achieve it. Once readings start climbing much beyond that, it is time to stop transmitting heavily and look for the cause. There is some real-world tolerance here. A vehicle-mounted aerial on a Defender, pickup or roof-rack-heavy off-roader is not the same as a carefully set up base antenna. You are working around compromises, and that is normal. Good tuning is about getting the best from the installation you actually have. ## Common faults that look like tuning problems Not every bad SWR reading means the whip needs adjustment. In many cases, the fault is elsewhere. A poor earth is one of the most common issues on body-mounted mobile installs. Magnetic mounts behave differently, while gutter, mirror and body brackets often depend on proper metal-to-metal contact. Powder coating, paint, rust, sealant and corrosion can all interfere. Damaged coax is another regular culprit. If the cable has been trapped in a door shut, crushed under trim, or bent too sharply, it may not perform properly. Cheap or [badly fitted plugs](https://cbradio.co.uk/product-category/plugs-and-connectors/) also cause trouble. A visually tidy install is not always an electrically sound one. Mounting position matters as well. A roof-centre location usually performs better than a low wing mount because the antenna has a more even ground plane. On 4x4s, people often fit aerials where they are protected from branches or garage doors, but that can come at a performance cost. Sometimes the right answer is not more tuning but a better mounting choice. ## A few practical points for 4×4 and off-road users Off-road vehicles are rarely ideal radio platforms. They carry roof tents, ladders, jerry cans, work lights and all sorts of metal accessories that change how an aerial behaves. If you tune the antenna with the vehicle empty and later bolt half a touring setup around it, the readings can change. That does not mean you need to retune after every accessory change, but if performance drops after adding kit, check the SWR again. The same applies if you move the mount, replace the spring, swap the whip or reroute the coax. Flexible whips and spring bases are popular for green laning and site work because they cope better with low branches and rough tracks. That is sensible, but flexibility can slightly affect consistency. There is always a trade-off between outright performance, survival and practicality. The best antenna on paper is no use if it gets ripped off on the first lane. ## CB radio antenna tuning guide for base stations Base station tuning follows the same principles, but the setup is usually less compromised. You still want a sound feedline, correct connections and an SWR check across the band. The difference is that a [homebase antenna](https://cbradio.co.uk/product-category/cb-aerials/homebase-aerials/), mounted properly and clear of surrounding obstructions, often gives more stable results. If a base antenna shows poor SWR everywhere, suspect assembly, feedline or connector faults before assuming the antenna itself is wrong. Home installations also need a bit of common sense around location. Nearby metalwork, guttering and loft spaces can all influence performance. ## When not to keep adjusting If the SWR is extremely high from the outset, do not keep keying up and fiddling with the whip in the hope it sorts itself out. That usually points to a wiring or mounting problem. Check every part of the chain – radio to patch lead, patch lead to meter, meter to coax, coax to mount, and mount to antenna. Likewise, if adjustments make almost no difference at all, stop and inspect the installation. A disconnected braid, shorted plug, poor earth or faulty meter can waste a lot of time. Tuning only works if the rest of the system is healthy. ## Getting the best result without overthinking it A well-tuned CB aerial is not about chasing laboratory numbers. It is about getting reliable performance for how you actually use the radio, whether that is convoy work, site traffic, road miles or weekend off-roading. Take your readings carefully, make small changes, and pay attention to the installation as a whole. If the antenna is mounted sensibly, the coax and connectors are sound, and the SWR is in a safe range across the band, you are in good shape. If you are unsure, that is exactly where a specialist supplier such as CB Radio UK earns its keep. A CB setup does not have to be fancy to work well. It just has to be fitted properly, tuned properly, and checked with a bit of patience. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Antenna%20Tuning%20Guide&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-antenna-tuning-guide%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-antenna-tuning-guide/?share=telegram) - **Categories:** Uncategorised --- ### [How to Install CB Radio in Your Vehicle](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/) **Published:** April 21, 2026 **Author:** **Excerpt:** Learn how to install CB radio in your vehicle with practical UK advice on mounting, wiring, aerial setup, SWR checks and common mistakes. **Content:** A CB that sounds poor, cuts out, or picks up more noise than speech is usually not a radio fault at all – it is an installation fault. Get the install right and even a modest setup can work well. Get it wrong and an expensive radio and aerial combination will still disappoint. If you are wondering how to install CB radio equipment properly in a car, 4×4, van or lorry, the job comes down to three things: sensible mounting, clean power, and a correctly matched aerial. This is not a difficult job, but it does reward care. A rushed install often leads to blown fuses, engine interference, weak transmit range, or a mic lead forever snagging on the gear lever. For off-road users in particular, a poor aerial mount or badly routed cable will not last long. ## What you need before you start Before fitting anything, make sure you have the full installation kit to hand. That normally means the CB radio, microphone, mounting bracket, power lead, aerial, aerial mount, coax cable, and basic fixings. If your radio does not include an inline fuse on the power lead, fit one. An [SWR meter](https://cbradio.co.uk/product-category/tools/) is also worth having because it lets you set the aerial up properly rather than guessing. A few basic tools will make life easier: screwdrivers, spanners, a drill if you are using a permanent bracket, cable ties, insulating tape, and a multimeter. If you are wiring direct to the battery, crimp connectors are a better option than twisted wires and tape. ## How to install CB radio without making a mess of the cab The first decision is where the radio will live. In a 4×4 or working vehicle, practicality matters more than appearance. You want the set close enough to reach easily, but not where it bangs your knee, blocks the heater controls, or interferes with airbags. Under-dash mounting is still common, but overhead consoles, centre mounts, and custom dash positions can also work well depending on the vehicle. Think about the microphone too. A radio mounted neatly out of sight is no use if the mic lead has to stretch awkwardly across the cabin. The best position is one where you can see the display at a glance, operate the controls with minimal distraction, and stow the microphone securely when not in use. If you are fitting into a 4×4 used off-road, vibration matters. Use the proper bracket, tighten it firmly, and avoid flimsy trim panels. Metal structure is always preferable to thin plastic. On rough ground, weak mounting points soon show their limits. ### Choosing the right mounting position Lower dash positions are easy to reach but can be vulnerable to knocks, mud and passenger feet. Higher positions keep the radio cleaner and easier to read, but you must not obstruct visibility. In commercial vehicles and larger 4x4s, overhead mounting can work very well if cab space is tight. There is no single best answer for every vehicle. A Defender, pickup, Transit and family SUV all present different limits. The right choice is the one that keeps the radio secure, usable and out of the way. ## Powering the radio properly A CB radio needs a stable 12V supply. The neatest way to fit one is often direct to the vehicle battery, using the supplied power lead and an inline fuse on the positive side. This helps avoid electrical noise from other circuits and gives the radio a dependable supply when transmitting. Some people tap into an accessory feed behind the dash. That can work on lower-power setups, but it depends on the circuit and the vehicle. If the wiring is too light or shared with noisy electrical systems, you may get interference or voltage drop. For a reliable install, especially in off-road vehicles with extra accessories fitted, direct battery wiring is usually the safer route. Run the positive and negative leads carefully through an existing grommet if possible. Protect the cable where it passes through bulkheads or metal panels. Do not leave wires rubbing on sharp edges. Keep the power cable tidy and separate from anything that may chafe, heat up or move. ### Avoiding interference and bad earths Engine noise, alternator whine and ignition interference are common complaints after a poor install. Good earths help. A loose or dirty ground point causes trouble, as does sharing poor-quality accessory wiring. If you are earthing to chassis metal rather than running both leads to the battery, scrape back paint to bare metal and make the connection properly. If interference remains, the cause is often elsewhere in the vehicle rather than the radio itself. LED light bars, phone chargers, dash cams and other accessories are regular offenders. ## Installing the aerial If the radio is the heart of the setup, the aerial is the part that really decides how well it performs. You can fit the best CB on the market, but if the aerial is badly mounted or poorly tuned, the range will still be poor. For most mobile users, the aerial goes on a body mount, mirror mount, gutter mount or [magnetic mount](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/). A mag mount is quick and requires no drilling, which makes it popular for temporary use or first installs. The trade-off is that it is less secure, the cable usually routes less neatly, and performance can vary depending on where it sits. A fixed mount is generally better for regular use, especially on 4x4s. It gives a more solid installation and is less likely to shift or get damaged in bad weather or green lanes. The downside is that it takes more effort and may involve drilling. ### Where to mount the aerial Height helps, but placement matters just as much. The aerial should be mounted as high and as clear of obstructions as practical. Roof centre positions often give the most balanced performance because they provide a good ground plane. On many 4x4s and vans that is not always convenient, so wing, gutter, or rear body mounts are often used instead. Be realistic about your use. A very tall whip may perform well, but it is not always ideal for multi-storey car parks, garages, or wooded tracks. Shorter aerials are easier to live with but usually give away some performance. That is a straightforward trade-off rather than a fault. Route the coax cable carefully and do not crush it in doors or tailgates if you can avoid it. Sharp bends and damaged coax reduce performance. Leave enough slack for movement, but not so much that it tangles or rubs. ## Tuning the aerial with an SWR meter This is the part many beginners skip, and it is the part that matters most. Once the radio and aerial are installed, the aerial needs checking with an SWR meter. SWR – standing wave ratio – shows how well the aerial is matched to the radio. If the SWR is too high, the radio will not transmit efficiently and you risk damaging it over time. A good reading means the power is going out through the aerial instead of reflecting back into the set. Connect the SWR meter between the radio and the aerial lead, then take readings on the appropriate channels. Adjust the aerial length in small steps and recheck until the reading is acceptable. Different aerials adjust in different ways, so follow the maker’s instructions. Small changes can make a noticeable difference, so do not overdo it. ## Common mistakes when installing a CB Most installation problems are predictable. People mount the radio where it is awkward to use, take power from a weak circuit, fit the aerial in a poor location, or never tune it at all. Another regular issue is assuming all metalwork provides a good earth. It does not. Poor cable routing is another one. Coax trapped under trim, power leads left loose near pedals, and microphone cables hanging across controls all create avoidable problems. A tidy install is usually a better-performing one. There is also the temptation to hide everything completely. Some concealment is fine, but not if it makes the set hard to reach or leaves no ventilation. Radios do generate heat, especially during regular use. ## Final checks before you use it on the road Once everything is mounted and wired, check that the radio powers up correctly, the microphone transmits, the speaker audio is clear, and the aerial connection is secure. Make sure no cables interfere with pedals, steering, gear selection or safety equipment. Test the setup somewhere sensible before relying on it. A quick radio check with another local user tells you more than staring at the display. If the receive audio is noisy, the transmit reports are weak, or the SWR reading is poor, sort it now rather than living with a mediocre install. If you want your CB to work properly day in, day out, treat the installation as part of the equipment rather than an afterthought. A well-fitted basic setup will usually serve you better than a premium radio bolted in badly. And if you are unsure which [aerial, mount or cable arrangement](https://cbradio.co.uk/product-category/cb-radios-and-accessories/cb-radio-accessories/) suits your vehicle, it is worth asking a specialist such as CB Radio UK before you start drilling holes. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20How%20to%20Install%20CB%20Radio%20in%20Your%20Vehicle&body=https%3A%2F%2Fcbradio.co.uk%2Fhow-to-install-cb-radio-in-your-vehicle%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/how-to-install-cb-radio-in-your-vehicle/?share=telegram) - **Categories:** Uncategorised --- ### [Choosing a CB Radio Aerial for 4x4 Use](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/) **Published:** April 20, 2026 **Author:** **Excerpt:** Choosing the right cb radio aerial for 4x4 use means better range, safer mounting and fewer problems on the road or off-road in the UK. **Content:** A poor aerial will make even a decent radio feel second-rate. If you are fitting a cb radio aerial for 4×4 use, the aerial matters just as much as the set itself – and in many cases, more. On green lanes, on convoy runs, or working in rural areas where mobile signal is patchy, the right aerial setup is what keeps your communication clear and dependable. A lot of buyers start by looking at the radio first and treat the aerial as an afterthought. That usually leads to the same problems – weak performance, awkward mounting, excessive branch strikes, or an installation that looks fine in the driveway but struggles in real use. For a 4×4, the right choice depends on where you drive, how often you use CB, and how much compromise you are willing to make between height, flexibility and outright performance. ## Why a cb radio aerial for 4×4 needs different thinking Aerial choice for a standard road car is fairly straightforward. A 4×4 is different because the environment is different. You are more likely to deal with mud, vibration, low branches, roof racks, spare wheel carriers, bonnet mounts and uneven body panels. All of that affects both mounting options and how well the aerial performs. Height is usually your friend with CB, but height is also what gets hit first off-road. A long whip can give stronger performance than a compact option, yet if it is constantly being bent through woodland or clattering against the bodywork, that benefit starts to wear thin. The best setup is not always the tallest one. It is the one that suits the vehicle and the way you actually use it. There is also the issue of vehicle shape. Many 4x4s have body layouts that make aerial placement less than ideal. You may have limited metal ground plane, rear-mounted accessories, or plastic panels where a simple mount would otherwise go. That means aerial selection and mounting choice need to be considered together, not separately. ## Aerial length and performance The basic rule is simple enough – longer CB aerials generally perform better than shorter ones. A longer whip tends to offer better transmit and receive performance, particularly when you want reliable convoy comms over changing terrain. If range is your top priority, a longer aerial is usually the better starting point. That said, there is no free lunch. Long aerials are more exposed, more likely to catch branches, and more demanding in terms of mounting strength. On a daily-driven 4×4 that also spends time in car parks, on motorways and under height barriers, a very long whip can become more nuisance than benefit. Shorter aerials are easier to live with. They suit vehicles that see mixed use and they can be a sensible choice where discretion matters. The trade-off is performance. A compact aerial may work perfectly well for close convoy work, site use or casual local communication, but if you expect it to match a full-length whip across open ground, you will be disappointed. ## Flexible vs rigid whips For off-road vehicles, flexibility matters. A flexible whip is often the safer choice because it can take branch strikes and movement without putting as much stress on the mount. That makes it popular for green laning, pay-and-play sites and general rough use. A more rigid aerial can still be useful, particularly where the mounting position is protected and the vehicle is used more on-road than off-road. Some users prefer the feel and appearance of a more rigid setup, but it has to suit the job. If your usual route includes woodland tracks or overgrown access roads, flexibility quickly becomes less of a nice extra and more of a requirement. Spring bases can help here as well. They add give at the mounting point and can reduce strain when the aerial catches a branch or gets knocked. They are not a cure for poor mounting, but on a working 4×4 they can make a noticeable difference to longevity. ## Where to mount a cb radio aerial for 4×4 vehicles Mounting position affects performance more than many people realise. In ideal terms, an aerial wants to be mounted as high as possible and in a position with a good surrounding metal area. In practice, 4×4 installations often involve compromise. A roof mount usually offers strong all-round performance because it gives the aerial a better chance to radiate evenly. The drawback is obvious enough – it raises overall height and can be vulnerable off-road. It may also be inconvenient if you have a roof tent, rack, light bar or regular access restrictions. A rear mount on a spare wheel carrier, body bracket or gutter-style position is common on 4x4s because it is practical and keeps the aerial out of the driver’s line of sight. This can work very well, but the vehicle body may shield part of the signal pattern. For many users, that is a worthwhile compromise because the installation is stronger and easier to live with. Bonnet and wing mounts are another option. They are often neat and accessible, and can suit vehicles where rear mounting is awkward. The main point is to make sure the mount is solid and electrically sound. A shaky bracket or poor earth will give you trouble whatever aerial you choose. ## Ground plane and vehicle bodywork CB aerials rely heavily on how they interact with the vehicle body. Metal bodywork can act as part of the aerial system, which is why mounting location matters so much. On older or more traditional 4x4s with plenty of steel, this is often less troublesome. On newer vehicles with more plastic trim, composite panels or awkward body shapes, you may need to think harder about getting the installation right. If the aerial is not seeing a decent ground plane, performance can suffer. That may show up as poor SWR readings, reduced range or inconsistent results depending on direction. This is one reason magnet mounts are not always the best answer for serious 4×4 use. They may be handy in some situations, but for durability and a more dependable electrical connection, a proper fixed mount is usually the better route. ## Tuning matters more than people expect Even the best aerial will underperform if it is not tuned properly. This is where many installations fall short. The aerial is mounted, the radio powers up, and that is taken as [job done](https://cbradio.co.uk/cb-radio-manuals/). It is not. [Checking SWR](https://cbradio.co.uk/product-category/tools/) is essential. If the aerial is too long or too short for the installation, or if there is a grounding issue, the radio will not be working as it should. In the worst case, poor tuning can put unnecessary strain on the set. In the best case, it simply means you are not getting the performance you paid for. Tuning is not difficult, but it does need to be done correctly. Changes in mounting position, bracket type, spring use and even cable routing can affect the result. If you are building a proper mobile setup, take the extra time to get it right. ## Matching the aerial to your kind of driving If your 4×4 is mainly used for convoy runs, social off-road days and occasional trips, a medium-length [flexible aerial](https://cbradio.co.uk/product-category/cb-aerials/) is often the sweet spot. It gives decent performance without becoming a constant headache. If long-range performance is the priority and the vehicle has a sensible mounting point, a longer whip is worth considering. This suits users who rely on CB regularly and want the strongest practical setup for open-road or rural use. If your vehicle spends a lot of time in dense woodland, tight lanes or urban car parks, a shorter aerial may be the more realistic option. You give away some performance, but you gain convenience and reduce the risk of damage. There is nothing wrong with choosing practicality first, as long as expectations are realistic. For buyers who are unsure, this is where specialist advice helps. A good retailer will ask about the vehicle, the mount position and how you use it, rather than just pointing you at the tallest aerial on the shelf. That is often the difference between buying once and buying twice. ## Common mistakes to avoid The biggest mistake is choosing on looks alone. Aerials are part performance item, part installation component. If it looks smart but does not suit the mount or the vehicle, it is the wrong choice. The next common issue is underestimating the mount. A quality aerial fitted to a poor bracket will still let you down. On a 4×4, vibration and movement expose weak hardware very quickly. Cable routing is another area where shortcuts cause problems. Coax should be run neatly, protected from chafing, and not crushed through doors or tailgates. It sounds basic, but a lot of faults start there. Finally, do not ignore tuning. Too many users blame the radio when the aerial system is the real issue. A well-chosen CB aerial setup makes your radio more useful every time you turn it on. If you want a cb radio aerial for 4×4 use that works properly in the real world, think beyond simple height figures and focus on the whole installation – aerial, mount, vehicle and how you drive. Get that right, and the kit will earn its place every time the route gets rough. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Choosing%20a%20CB%20Radio%20Aerial%20for%204x4%20Use&body=https%3A%2F%2Fcbradio.co.uk%2Fchoosing-cb-radio-aerial-for-4x4-use%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/choosing-cb-radio-aerial-for-4x4-use/?share=telegram) - **Categories:** Uncategorised --- ### [What to Expect in a CB Radio Starter Kit](https://cbradio.co.uk/what-to-expect-in-a-cb-radio-starter-kit/) **Published:** April 19, 2026 **Author:** **Excerpt:** A CB radio starter kit gives you the core gear to get on air. Here's what should be included, what to avoid, and how to choose the right kit. **Content:** Buy the wrong CB setup and you usually find out the hard way – weak transmit, poor receive, awkward fitting, or an aerial that never quite tunes properly. A good cb radio starter kit avoids that. It gives you the core parts that actually work together, so you can get on air faster whether you’re fitting out a 4×4, a working vehicle, or a simple home setup. For most buyers, the appeal is obvious. Instead of piecing together a radio, microphone, mount, antenna, [power lead](https://cbradio.co.uk/product-category/power-supplies-and-inverters/) and fittings one item at a time, a kit gives you a sensible starting point. That said, not every kit is built with the same user in mind. Some are fine for light road use. Others are better suited to off-road vehicles, farm use, convoy work, or a fixed station at home. ## What a cb radio starter kit should include At the very least, a proper starter kit needs four things that match each other properly: the CB radio itself, a microphone, an antenna, and the mounting or connection parts needed to install it. If one of those elements is weak, the whole setup suffers. The radio is the obvious centrepiece, but it is not the only thing that matters. Buyers often focus on features such as channel display, scan, PA function or multi-standard operation, yet the aerial system has at least as much effect on real-world performance. A modest radio with a well-chosen, correctly fitted antenna will usually outperform a more expensive set paired with a poor aerial. Most kits also include a mounting bracket for the radio, a microphone hanger, power lead, and some form of antenna mount or magnetic base depending on the intended use. In vehicle kits, coax cable is usually part of the package too. If it is not, that is something to check before ordering, because missing cable or the wrong connector can turn a simple install into a nuisance. ## Choosing a CB radio starter kit for your vehicle Vehicle type makes a big difference. A compact car, a Defender, a pickup and a lorry cab do not all suit the same equipment. That is where many first-time buyers go wrong. They shop by radio alone and only think about antenna position once the box arrives. If space is tight, a compact radio with front-facing controls makes life easier. In a 4×4 or off-road vehicle, durability and a secure mounting position tend to matter more than cosmetic looks. If the vehicle sees rough tracks, green lanes or regular vibration, you want gear that stays put and connectors that do not shake loose. Mag mount antennas are popular because they are quick to fit and easy to remove. For occasional use, they make sense. For regular use off-road, they are not always the best long-term answer. Branches, low clearances, mud and hard jolts can make a more permanent mount the better option. Body mount, [mirror mount](https://cbradio.co.uk/product-category/car-parts/) or gutter mount solutions often give a tidier and more dependable installation when the vehicle is used properly rather than just parked at shows. Antenna length matters too. Shorter antennas are easier to live with, especially on daily drivers and vehicles with height restrictions, but there is usually a trade-off in performance. Longer antennas often deliver better results when installed well, though they need more thought around mounting position and clearance. There is no universal best choice – it depends on where you drive and what compromises you are willing to make. ## What beginners often overlook The biggest mistake is assuming a starter kit is completely plug-and-play. Some are close, but CB still rewards correct installation. The antenna needs to be fitted in a sensible location, the cable run needs to be clean, and the setup should be checked properly rather than guessed. SWR is the part many beginners hear about but do not fully understand at first. In simple terms, it is how you check that the antenna system is working efficiently with the radio. If the SWR is too high, performance drops and in some cases you risk damaging equipment over time. That does not mean CB is difficult, only that a decent setup should not skip the basics. Power supply is another point people miss. In a vehicle, that usually means wiring the radio correctly and using a suitable fused feed. For home use, it means pairing the radio with the right power supply rather than improvising with whatever happens to be lying around in the garage. A clean, stable power source gives fewer problems with noise and reliability. ## Mobile kits versus homebase kits A mobile CB radio starter kit and a homebase kit are not really the same thing, even if the radio itself could be used in either role. The difference is in how the rest of the system is built. For mobile use, the priority is practical installation. You need a radio that fits the cab, an antenna that suits the vehicle, and hardware that can cope with daily use. Ease of mounting matters. So does microphone placement. A setup may look fine on paper and still be irritating to use if the radio is tucked too far away or the mic lead constantly gets in the way. For homebase use, antenna location becomes even more important. Height, clearance and surrounding obstructions all affect results. A basic indoor setup may work for very local chatter, but if you want the best from a fixed station you need to think more seriously about the outside antenna, cable route and power supply. In that situation, a cheap all-in-one bundle can be a false economy. ## Are cheap starter kits worth it? Sometimes yes, sometimes no. It depends what is being cut to hit the price. An affordable kit can be perfectly adequate if the radio is reliable, the microphone is usable, and the antenna is matched to the job. Not every beginner needs a feature-heavy set. If your goal is simple vehicle-to-vehicle chat on road runs, site work, events or convoys, a straightforward package may be all you need. Where cheaper kits tend to disappoint is in the small parts. Thin coax, weak mounts, poor microphones and low-grade antennas can drag down the whole setup. You may save money upfront, then end up replacing half the kit once you realise why the range is patchy or the install feels flimsy. That is why it pays to buy from a specialist rather than a general marketplace seller who cannot tell you whether a mount suits a particular vehicle. ## Features worth paying for Not every extra feature is marketing fluff. Some genuinely make day-to-day use easier. Auto squelch can help if you are new to CB and want quicker setup without constant fiddling. Channel scan is useful if you are monitoring activity rather than staying on one agreed channel. Front-mounted speaker placement can improve clarity in noisier vehicle cabins. On some models, multi-standard operation is useful for buyers who travel, though UK users should still make sure they understand legal operation and correct settings. A strong microphone and clear audio are worth more than a long list of gimmicks. So is a well-built chassis, especially in working vehicles and off-road use. Good controls that you can use with gloves on are often more valuable than flashy displays. ## How to pick the right kit first time Start with the vehicle or location, not the radio. Ask where the set will be mounted, where the antenna can go, how much height you can live with, and whether the setup is for occasional leisure use or regular hard use. Once those answers are clear, the sensible radio options narrow down quite quickly. Next, think about how you actually plan to use it. A green laning group, a farm vehicle, a road convoy and a base station all have slightly different priorities. One buyer needs compactness. Another needs range and ruggedness. Another wants a simple legal UK setup with no fuss. The best kit is the one that matches the job, not the one with the most buttons. It also helps to buy from people who know the difference between a shelf-friendly bundle and a setup that will actually work in the real world. That is where a specialist such as CB Radio UK earns its place – not by selling the most parts, but by helping buyers avoid the wrong ones. If you are starting from scratch, keep it simple, choose compatible gear, and do not treat the antenna as an afterthought. Get those basics right and your first CB setup will be far more enjoyable from day one. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/what-to-expect-in-a-cb-radio-starter-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/what-to-expect-in-a-cb-radio-starter-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/what-to-expect-in-a-cb-radio-starter-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/what-to-expect-in-a-cb-radio-starter-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20What%20to%20Expect%20in%20a%20CB%20Radio%20Starter%20Kit&body=https%3A%2F%2Fcbradio.co.uk%2Fwhat-to-expect-in-a-cb-radio-starter-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/what-to-expect-in-a-cb-radio-starter-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/what-to-expect-in-a-cb-radio-starter-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/what-to-expect-in-a-cb-radio-starter-kit/?share=telegram) - **Categories:** Uncategorised --- ### [Best CB Radio for Heavy Equipment](https://cbradio.co.uk/best-cb-radio-for-heavy-equipment/) **Published:** April 18, 2026 **Author:** **Excerpt:** Looking for the best CB radio for heavy equipment? Learn what matters most for diggers, loaders and site vehicles in tough UK working conditions. **Content:** A CB set that works perfectly in a pickup can become a headache the moment it goes into a digger, loader or telehandler. Heavy equipment adds vibration, electrical noise, awkward mounting positions and plenty of metalwork that can ruin a poor install. That is why choosing the best CB radio for heavy equipment is less about fancy extras and more about getting the basics right. If you are fitting radios into plant machinery, farm kit or site vehicles, you need something that can be heard clearly over engine noise, survives day-to-day abuse and is simple enough to use with gloves on. A tidy spec sheet is one thing. A radio that still works properly after a wet winter on site is another. ## What makes the best CB radio for heavy equipment? The short answer is reliability, clear audio and an installation that suits the machine. On heavy equipment, the radio itself is only part of the job. The best setup is usually a solid, straightforward mobile CB with a durable microphone, a proper external speaker and an aerial chosen for the machine rather than whatever happened to be cheapest. Size matters more than many buyers expect. Cabs on excavators and compact loaders can be tight, especially once you factor in heater controls, brackets, drink holders, control levers and operator visibility. A compact DIN-sized or low-profile radio often makes life easier, but there is a trade-off. Smaller radios can have tighter controls and smaller displays, which are not always ideal if operators are changing channels quickly or using the set in poor light. Audio is another big one. Plant equipment is noisy by nature. Engines, hydraulics, tracks and site activity can drown out a built-in speaker very quickly. A radio with strong audio output helps, but in many heavy equipment installations the real answer is an [extension speaker](https://cbradio.co.uk/product-category/extension-speakers/) mounted in a better position. That gives you a much more usable system than relying on the radio’s internal speaker tucked under a console. ## Heavy equipment is harder on CB gear than most vehicles A lot of radios are sold as mobile units, but there is a difference between occasional road use and daily work on rough ground. Heavy equipment shakes, rattles and sends vibration through everything. Dust gets everywhere. Doors are slammed. Power can be a bit rough depending on the machine and how accessories are wired in. That is why simple controls are often better than complicated menu systems. If a machine operator needs to get on channel quickly, adjust volume and squelch, and get back to work, a straightforward front panel beats a feature-packed set that takes too much fiddling. More functions are not always better in this type of install. Microphone quality also matters more than people think. A [flimsy mic clip](https://cbradio.co.uk/product-category/cb-radio-accessories/cb-radio-microphones/) or lightweight lead will not last long in a busy cab. Good tactile buttons, a tough cable and a mic that can take being grabbed with dirty gloves on are all worth having. It sounds basic, but on work equipment basic usually means dependable. ## Key features worth paying for When people ask what to look for in the best CB radio for heavy equipment, there are a few features that genuinely earn their place. A clear, easy-to-read display is useful, especially in cabs with changing light conditions. Backlit controls can help for early starts or winter afternoons. Automatic squelch can be handy, but many experienced users still prefer manual squelch because it gives more control in noisy environments. ANL and noise reduction features are worth considering because plant machinery can create electrical interference. They will not fix a poor installation, but they can make a good setup more pleasant to use. If the machine suffers from alternator whine or other electrical noise, filtering at the power source and careful cable routing are just as important as any radio feature. Channel changing needs to be quick and obvious. Public address functions, novelty features and overcomplicated menus are lower priorities for most site or agricultural users. If you need communication between machines, banksmen, yard staff or support vehicles, the radio should do one job properly – provide clear and immediate contact. ## The radio is only half the system This is where many installs go wrong. Buyers spend time choosing the radio, then fit it with a poor aerial in the wrong place and wonder why performance is disappointing. On heavy equipment, the aerial choice is just as critical as the set itself. A rigid aerial might suit one machine and be completely wrong for another. If the equipment works around trees, buildings, loading bays or tight access routes, a flexible whip is often the safer option. If the machine has constant overhead contact risks, a spring base can help reduce damage. The mounting position also needs thought. Too low down and the bodywork can block performance. Too exposed and it may get knocked repeatedly. Ground plane issues come up regularly on plant and agricultural machinery. Not every machine gives you the same easy mounting options you get on a standard road vehicle. In some cases, a no-ground-plane solution or a carefully planned bracket setup is the better route. It depends on the equipment, the available mounting points and how much metal surrounds the aerial. Power wiring deserves equal attention. Running the set from a clean, properly fused supply is best practice. Tapping into whatever feed is nearest can work, but it can also introduce noise or reliability problems. On expensive working equipment, it is not worth bodging. ## Which type of CB radio suits plant machinery best? For most heavy equipment users, a conventional 12V mobile CB is the standard choice, provided the machine’s electrical system supports it or the correct converter is used. Compact chassis models are popular because they fit more easily into modern cabs, but full-size sets still have advantages where space allows. They are often easier to operate and can offer stronger front-mounted audio. If the machine is used by several operators, simplicity should come first. A set with large knobs, clear labelling and minimal fuss is usually the better investment than a unit aimed at hobby users who enjoy extra functions. If the same operator uses the machine every day and wants a more tailored setup, then a more advanced radio might make sense. There is also the question of UK and CEPT operation. For users who stay local on private land or work sites, standard legal UK operation may be all they need. Others may want flexibility depending on where and how the radio is being used. The right answer depends on the working environment, not just the machine. ## Common mistakes when buying a CB for heavy equipment The biggest mistake is buying purely on price. Cheap radios can be tempting for fleet installs, but if the controls are fiddly, the audio is weak and the build feels flimsy, that saving disappears quickly. Downtime, frustrated operators and repeated replacement costs soon catch up. The next mistake is underestimating the installation. Even a good radio will perform badly with a [poor aerial](https://cbradio.co.uk/product-category/cb-aerials/), bad SWR setup or weak power connection. Heavy equipment often needs a more considered install than a road car because the cab layout, body shape and operating conditions are less forgiving. Another common issue is ignoring speaker placement. If operators cannot hear incoming audio over the machine, the radio may as well not be there. In many cases, adding an extension speaker is one of the best value upgrades you can make. Finally, there is overbuying. Some users pay for a long list of features that never get touched. If the job is machine-to-machine communication on a site, straightforward and tough usually beats clever. ## What we would prioritise for a working setup For a dependable working installation, we would put the budget into a proven mobile CB, a quality aerial matched to the machine, a proper mount, a decent external speaker and correct tuning. That combination will outperform a more expensive radio fitted badly. This is where buying from a specialist matters. A general electronics retailer might sell you a box. A proper CB supplier can help you think through cab space, aerial length, grounding, speaker placement and the realities of the machine you are fitting. At CB Radio UK, that practical side of the job is often what makes the difference between a setup that merely powers on and one that earns its keep. ## The best CB radio for heavy equipment depends on the machine There is no single magic model that suits every excavator, dumper, dozer and telehandler. A compact unit may be perfect in one cab and awkward in another. A taller aerial may deliver better performance on open ground, but be a poor choice in a yard with low branches and constant strikes. That is why the best CB radio for heavy equipment is really the one that matches the machine, the job and the operator. If you are buying for daily use, think less about gimmicks and more about how the setup will behave six months from now. Will the mic still be where it should be? Can the driver hear it over the engine? Is the aerial likely to survive the work? Those are the questions that lead to a better choice. Get those details right and a CB setup becomes proper working kit, not another gadget bolted into the cab and forgotten about. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-cb-radio-for-heavy-equipment/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-cb-radio-for-heavy-equipment/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-cb-radio-for-heavy-equipment/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-cb-radio-for-heavy-equipment/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Best%20CB%20Radio%20for%20Heavy%20Equipment&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-cb-radio-for-heavy-equipment%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-cb-radio-for-heavy-equipment/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-cb-radio-for-heavy-equipment/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-cb-radio-for-heavy-equipment/?share=telegram) - **Categories:** Uncategorised --- ### [Where Can I Buy CB Radio Equipment in the UK?](https://cbradio.co.uk/where-can-i-buy-cb-radio-equipment-uk/) **Published:** April 17, 2026 **Author:** **Excerpt:** Where can I buy CB radio equipment in the UK? Find the best places to buy radios, aerials, mics and kits with the right support and advice. **Content:** If you are asking where can I buy CB radio equipment, you are usually not looking for just any shop that happens to list a few radios. You are trying to avoid the usual problems – poor advice, mismatched aerials, missing fittings, and buying a radio that does not suit the way you actually use it. That matters whether you are fitting out a 4×4, replacing a cab radio in a lorry, or putting together a homebase setup. ## Where can I buy CB radio equipment without guesswork? The short answer is that specialist CB radio retailers are usually the best place to buy. General marketplaces and non-specialist electronics shops may carry a few sets, but CB is one of those areas where the detail matters. A radio on its own is rarely the full answer. You may also need an aerial, mount, coax, [connectors](https://cbradio.co.uk/product-category/plugs-and-connectors/), a power solution, an external speaker, or a microphone upgrade depending on your installation. A proper specialist will normally stock complete categories rather than one or two token items. That means CB radios, starter kits, antennas, magnetic mounts, fixed body mounts, SWR meters, extension speakers, power supplies, and the smaller parts that stop a job from becoming a headache halfway through fitting. If you are buying for a vehicle, especially a 4×4 or working vehicle, that joined-up range makes a real difference. ## The best places to buy CB radio equipment For most UK buyers, there are four realistic options. They are not equal, and the right one depends on whether you value price alone or whether you want the right setup first time. ### Specialist CB radio retailers This is the safest route if you want proper choice and relevant advice. A specialist retailer understands the difference between a compact DIN-sized unit for a tight dashboard, a straightforward legal FM radio for day-to-day use, and a more advanced multimode set for experienced users. They also understand antenna matching, vehicle grounding issues, and the realities of fitting radio gear to 4x4s, vans, plant, and home stations. You are also more likely to find practical extras that mainstream retailers ignore. That includes mic wiring information, replacement handsets, extension speakers for noisy cabs, spring bases for off-road use, and power supplies for base station operation. If you already know exactly what you need, that depth saves time. If you do not, it prevents expensive mistakes. ### Large online marketplaces These can be useful for checking what exists on the market, but they are hit and miss for actual buying. You may find attractive prices, but listings are often vague, bundled badly, or missing key compatibility details. It is common to see radios sold without clear information about included microphones, mounting brackets, power leads, or legal UK specification. The bigger issue is support. If your aerial is wrong for your mount, or your radio needs a specific connector, a marketplace seller may not help much beyond the basic order process. That is fine for low-risk purchases. It is less fine when you are trying to build a reliable comms setup for regular use. ### General electronics retailers These are rarely the best answer for CB. Most general electronics shops focus on mainstream consumer demand, so the CB range is limited if it exists at all. You may see a basic radio or accessory now and then, but not the variety needed for different vehicles, usage types, and mounting positions. If you only need a very simple replacement and already understand the technical side, they might do at a push. For anyone building a full setup, they are usually too shallow on stock and advice. ### Second-hand sources Used CB equipment can be worth considering, especially if you know older models and are comfortable testing them. Plenty of good radios stay in service for years. That said, second-hand buying comes with obvious trade-offs. Microphones may have wiring issues, output may be weak, cosmetic condition may hide internal wear, and accessories are often incomplete. For experienced users, used gear can be a sensible way to pick up a spare set or a particular classic model. For beginners, it is often a false economy unless the seller is trusted and the kit is complete. ## What to look for when choosing where to buy CB radio equipment A good CB supplier should make it easy to buy the right equipment, not just any equipment. That starts with category depth. If a shop only lists a handful of radios and not much else, that is usually a sign that CB is not really their field. Look for a retailer that groups products sensibly. You should be able to browse radios, aerials, mounts, microphones, [power supplies](https://cbradio.co.uk/product-category/power-supplies-and-inverters/), speakers, connectors, scanners, and related accessories without hunting around. [Starter kits](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/) are especially useful if you are new to CB, because they reduce the risk of forgetting a critical part. Support matters too. A specialist should be able to help with practical questions such as whether a magnetic mount will suit your vehicle, whether a short antenna is a compromise worth making, or whether a compact radio is better than a full-sized front speaker unit in a noisy cab. You do not need a lecture. You do need answers from people who understand the gear. ## Buying CB gear for different uses Not every buyer needs the same setup, which is exactly why specialist stock matters. ### For 4×4 and off-road use Off-road setups need to cope with vibration, weather, mud, and awkward mounting positions. Aerial choice becomes more than a simple range question. You may want something flexible with a spring base, or a mount that works around roof racks, snorkels, or rear bodywork. Compact radios also make sense in many modern 4×4 interiors where dashboard space is limited. This is where buying from a specialist pays off. You can match the radio and antenna to the vehicle rather than forcing a generic setup to fit. ### For lorries, vans, and working vehicles Working users usually care about reliability, clear audio, and ease of use. A fancy feature list matters less than a set that is easy to operate on the move and tough enough for daily use. External speakers are often worthwhile in louder cabs, and microphone quality can make more difference than people expect. If you are fitting multiple vehicles, consistency is also useful. Buying from one specialist source makes it easier to keep equipment similar across the fleet. ### For homebase stations Base station buyers need a slightly different approach. Along with the radio itself, you may need a power supply, base antenna, mounting hardware, and the right cable run. Some buyers start with a mobile radio used at home, while others prefer equipment chosen specifically for fixed use. Neither is automatically wrong. It depends on your budget, available space, and how permanent the setup will be. A retailer with both mobile and homebase products is far more useful here than a shop that only carries one side of the category. ## Where beginners often go wrong The biggest mistake is buying the radio first and treating everything else as an afterthought. The aerial system has a huge effect on performance, and a poor installation will make a good radio seem average. Another common problem is choosing the smallest antenna possible without understanding the compromise. Shorter antennas are convenient, but convenience usually costs range. Beginners also tend to underestimate mounting and connection details. A missing bracket, wrong connector, or poor earthing point can slow the whole job down. That is why starter bundles and clear category browsing are helpful. They take some of the guesswork out. If you are new to CB, buy from somewhere that treats the setup as a system, not a single box on a shelf. ## Why specialist support still matters CB radio is straightforward once the pieces are matched properly, but that does not mean every purchase is simple. A 4×4 owner with a roof tent and rear ladder has different mounting challenges from a motorway driver in a standard cab. Someone replacing an old set may want to keep an existing antenna if possible. Someone else may need a complete fresh install from power lead to mount. That is where a specialist retailer earns its place. A business such as CB Radio UK is built around these exact questions, with the range and practical backup to help buyers choose properly rather than patch problems later. Price matters, of course. But in CB, the cheapest route is not always the least expensive once you factor in returns, missing parts, and underperforming setups. Good stock, sensible product organisation, and direct support are often worth more than saving a few pounds on a listing that tells you very little. So if you are wondering where to buy CB radio equipment, start with a proper CB specialist, especially if you need more than just a replacement handset. The right shop should help you get a working setup, not simply a parcel through the post. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/where-can-i-buy-cb-radio-equipment-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/where-can-i-buy-cb-radio-equipment-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/where-can-i-buy-cb-radio-equipment-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/where-can-i-buy-cb-radio-equipment-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Where%20Can%20I%20Buy%20CB%20Radio%20Equipment%20in%20the%20UK%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fwhere-can-i-buy-cb-radio-equipment-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/where-can-i-buy-cb-radio-equipment-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/where-can-i-buy-cb-radio-equipment-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/where-can-i-buy-cb-radio-equipment-uk/?share=telegram) - **Categories:** Uncategorised --- ### [Best Off Road Communication System for 4x4s](https://cbradio.co.uk/best-off-road-communication-system-4x4s/) **Published:** April 16, 2026 **Author:** **Excerpt:** Find the best off road communication system for UK 4x4 use. Compare CB, PMR and app-based options for range, reliability and easy fitting. **Content:** You only notice poor comms when the convoy splits at a junction, the lead vehicle drops into a wooded lane, or somebody calls out an obstacle and half the group never hears it. Choosing the best off road communication system is less about gimmicks and more about one thing – getting clear, dependable contact between vehicles when mobile signals are patchy and conditions are rough. For most UK green laning, pay and play days, and organised 4×4 runs, the answer is still radio. The question is which type of radio suits how you drive, where you drive, and how much kit you want to fit properly. ## What makes the best off road communication system? The best setup for one driver is not automatically the best for another. A weekend laner travelling in a small group has different needs from a club organiser, a marshal, or somebody running larger convoys over mixed terrain. Before looking at features, it helps to think about how the system will actually be used. Range matters, but so does consistency. A radio that gives predictable vehicle-to-vehicle comms over hills, woodland tracks and muddy sites is usually more useful than a system with impressive claims on the box and poor real-world performance. Audio clarity matters as well, especially in diesel 4x4s with mud terrains humming away. Installation is another big factor. If the radio is awkward to mount, the speaker is hard to hear, or the aerial is badly placed, performance suffers whatever badge is on the front. In plain terms, the best off road communication system is the one that stays usable when the weather is bad, the route gets tight, and the group needs quick instructions without faffing with phones. ## CB radio remains the practical favourite For many UK off road users, CB is still the first thing to consider. That is not nostalgia talking. It is because CB works well for convoy chat, spotting guidance, hazard warnings and simple trail coordination without relying on mobile coverage. A proper vehicle-mounted CB setup gives you hands-on controls, a fixed power source and an external aerial that can outperform smaller handheld options. It is well suited to 4x4s that see regular use off road, and it remains a sensible choice for clubs and groups where compatibility matters. If several vehicles already run CB, joining that standard is often the easiest route to reliable group comms. CB also suits the way off road driving works. You need quick call-and-response conversation, not delayed voice notes or an app that drops out in a valley. If the lead vehicle needs to warn the convoy about a rut, gate, water crossing or oncoming traffic, a CB does the job simply. That said, there are trade-offs. CB needs a proper installation to work at its best. A poor aerial location, weak earthing or cheap coax can hold the system back. Handheld CB units have their place, but they rarely match the performance of a hard-wired mobile setup with a correctly tuned antenna. ### Why aerial choice matters more than many buyers expect With CB, the radio itself is only part of the system. The aerial does a huge amount of the heavy lifting. [A good antenna](https://cbradio.co.uk/product-category/cb-aerials/), mounted well and tuned correctly, can make a modest set perform far better than an expensive radio paired with a poor aerial. For off road use, durability matters just as much as raw signal performance. Long whips may give strong results, but they are not always practical in wooded lanes, low branches or tight access points. A shorter, flexible aerial can be the better everyday compromise, especially on vehicles that spend time in car parks, under barriers or on daily road use as well as off road. If you want dependable comms, treat the radio, mount, coax and aerial as one package rather than separate bits. ## Are handheld radios a better option? Sometimes yes, but not by default. Handheld radios appeal because they are simple to buy and easy to carry. If you are in a borrowed vehicle, only off roading occasionally, or want a radio for ground spotting as well as driving, a handheld can be useful. PMR446 handhelds are often the entry point. They are compact, licence-free and straightforward for casual use. For short-range communication on smaller sites, they can be perfectly adequate. If your group is spread over only a modest distance and terrain is fairly open, they may do the job at lower cost and with less installation effort. The downside is that handhelds are usually more limited in vehicle use. In a noisy cabin, audio can be harder to hear. Battery life becomes another thing to manage. Their antennas are also a compromise compared with a fixed mobile radio and external antenna. Once terrain gets hilly, wooded or broken up, performance can drop off quickly. So, are they the best off road communication system? For occasional use, maybe. For regular convoy driving, usually not. ## What about phone apps and network-based systems? App-based communication has improved, and some drivers like the convenience. If everyone in the group has decent signal and is happy using their phone, these systems can work for basic coordination. Network radios can also be useful where wide-area communication is needed beyond normal radio range. But off road driving in the UK often means the exact places where mobile coverage starts to fall apart. Valleys, woodland, remote tracks and rural routes are not the best environment for relying entirely on mobile data. Phones also introduce practical annoyances. Screens lock, batteries drain, notifications get in the way and audio routing through vehicle systems can be inconsistent. That does not make apps useless. They can sit alongside radio as a backup or planning tool. They are simply not the first choice if your main concern is dependable live communication between vehicles on the move. ## The best system depends on how you use your 4×4 A regular laner who drives with the same local group will often be best served by a fixed CB radio with a good aerial and external speaker if needed. It is dependable, easy to use and widely understood by other off road drivers. An occasional user who joins site days a few times a year may prefer a handheld setup to keep costs and fitting work down. That makes sense if expectations are realistic and distances are short. For event support, marshalling or mixed-use communication, the right answer can be more specific. Some users need a combination of vehicle-mounted radio and handhelds for drivers outside the vehicle. Others need compact radios to suit limited dashboard space in modern cabs. The right choice depends on whether your priority is range, simplicity, portability or compatibility with the rest of the group. ## Installation decides whether your radio feels brilliant or disappointing This is where many buyers get caught out. They focus on the radio and overlook the fitting. A solid unit with a poor mount position, weak power feed or badly placed antenna can sound mediocre. A sensibly chosen setup installed correctly will nearly always be more satisfying. For off road use, think about vibration, mud, water and practical access. You need controls you can reach, a microphone that stows neatly, and an antenna mount that can cope with rough tracks. Speaker placement matters too. If your cabin is loud, adding an [extension speaker](https://cbradio.co.uk/product-category/extension-speakers/) can transform usability. Cable routing should be tidy and protected. Power should be stable. Antenna mounts should be secure enough not to work loose after a few weekends of bumps and ruts. None of this is glamorous, but it is exactly what makes a radio system feel dependable. ## Common mistakes when choosing an off road comms setup The first mistake is buying on claimed range alone. Real performance depends on terrain, antenna quality, installation and vehicle layout. The second is assuming handheld means easier in every situation. It can mean easier to buy, not easier to use. The third is skimping on the aerial and accessories, then blaming the radio. Another common issue is not matching the system to the group. If your club or mates all use CB, turning up with an app-based setup is not much help. Off road communication works best when everybody can talk on the same platform without complications. ## So, which is the best off road communication system? For most UK 4×4 owners who want reliable convoy communication, a properly installed [CB radio system](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/) is still the strongest all-round choice. It offers good real-world usability, works independently of mobile networks, and suits the stop-start, obstacle-led nature of off road driving better than phone-based alternatives. That does not mean CB is right for every buyer. If you only need occasional short-range comms, a quality handheld may be enough. If you need broader coverage for specific work or events, network-based options may have a place. But for day-to-day off road use, especially in groups, CB remains the practical standard for good reason. If you are unsure, start with how and where you drive, how many vehicles you usually travel with, and whether you want a permanent fitted solution or something more portable. Get those answers right first, and choosing the kit becomes much easier. A decent radio setup should make your day out calmer, clearer and safer – and when the lane gets tight or the weather turns, that is exactly when proper comms earn their place. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/best-off-road-communication-system-4x4s/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/best-off-road-communication-system-4x4s/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/best-off-road-communication-system-4x4s/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/best-off-road-communication-system-4x4s/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Best%20Off%20Road%20Communication%20System%20for%204x4s&body=https%3A%2F%2Fcbradio.co.uk%2Fbest-off-road-communication-system-4x4s%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/best-off-road-communication-system-4x4s/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/best-off-road-communication-system-4x4s/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/best-off-road-communication-system-4x4s/?share=telegram) - **Categories:** Uncategorised --- ### [What Is the Best CB Radio Setup?](https://cbradio.co.uk/what-is-the-best-cb-radio-setup/) **Published:** April 15, 2026 **Author:** **Excerpt:** What is the best CB radio setup? It depends on where you use it. Here’s how to choose the right radio, aerial and install for UK use. **Content:** Ask three CB users what is the best CB radio setup and you will usually get three different answers. That is not because anyone is wrong. It is because the best setup depends on where you drive, how far you need to talk, how much room you have for an aerial, and whether you want a simple plug-and-go kit or something you can tune and improve over time. For most UK users, the best CB setup is not the biggest radio or the most expensive aerial. It is the setup that matches the vehicle, is installed properly, and is tuned well. A modest radio with a good aerial will usually outperform a high-end radio paired with a poor mount or badly tuned antenna. That is the point many beginners miss. ## What is the best CB radio setup for most people? If you want the straight answer, the best all-round CB radio setup for most drivers is a legal UK CB radio, a quality mobile aerial of sensible length, a solid mount, good coax, and a properly wired 12V power feed. Add an [external speaker](https://cbradio.co.uk/product-category/extension-speakers/) if the cab is noisy. That combination gives reliable day-to-day performance without making the installation awkward or fragile. For a 4×4 or off-road vehicle, practicality matters as much as outright range. A very long aerial may perform well, but if it catches on branches, garage entrances or roof bars, it soon becomes a nuisance. A medium-length aerial on a strong mount is often the better choice in the real world. It may give away a little peak performance, but it is more likely to stay fitted and working. For a [homebase station](https://cbradio.co.uk/product-category/cb-aerials/homebase-aerials/), the balance shifts. You are less constrained by height, so a proper base antenna mounted as high and clear as possible usually makes the biggest difference. In that case, the best setup is a stable radio, a decent power supply, low-loss coax, and the best antenna position your property allows. ## The aerial matters more than the radio This is the part worth repeating. If you are trying to decide where to spend your money, spend it wisely on the antenna side first. CB users often focus on radio features – channel scan, PA, S-meter, FM or AM modes, multimode capability – but the aerial system is what largely determines how well your signal gets out and how well you hear others. A short aerial is easier to live with, especially on a daily driver. A longer aerial generally performs better, but only if it is mounted and tuned correctly. There is always a trade-off. If your vehicle lives in car parks, under height barriers or in woodland, a flexible mobile antenna may be the smarter choice than a long rigid whip. Mounting position also matters. In simple terms, higher and clearer is better. Roof mounting often gives the most balanced performance because the antenna has a better ground plane and a clearer radiation pattern. But that is not always practical on a 4×4 with roof gear, or on vehicles where drilling is out of the question. Gutter mounts, mirror mounts, boot lip mounts and magnetic mounts all have their place. The best option is the one that suits the vehicle and gives a secure, electrically sound installation. ## Choosing the right radio A good CB radio should be easy to use, reliable and legal for UK operation. If you are new to CB, there is no need to overcomplicate it. A straightforward 40-channel unit with clear audio and simple controls is often enough. You want something you can operate without taking your eyes off the road for long. If you are a more experienced user, or you want flexibility for different operating styles, a multimode set may make sense. That depends on how and where you use it. More features are only useful if you actually need them. For many mobile users, a compact radio with a clear display and a strong front speaker is a better fit than a larger unit packed with functions they will rarely touch. Microphone quality is another factor people sometimes overlook. A decent standard mic is fine for most setups, but if you are trying to improve audio clarity in a noisy cab, upgrading the microphone or adding an extension speaker can make everyday use far easier. ## Power supply and wiring make a difference A CB setup is only as dependable as the power feeding it. In a vehicle, the cleanest approach is usually to wire the radio directly to the battery with the correct fuse protection, rather than relying on a cigarette lighter plug. Direct wiring can help reduce electrical noise and gives a more stable supply. Routing matters too. Keep power and coax runs tidy, avoid sharp bends, and try not to run coax tightly alongside noisy vehicle wiring where possible. A neat installation is not just about appearance. It can reduce interference, improve reliability and make fault-finding far easier later on. For a base station, the power supply needs to be appropriate for the radio. A quality regulated supply helps keep things stable and quiet. Cutting corners here can lead to annoying background noise or inconsistent performance. ## Tuning is not optional If you want to know what is the best CB radio setup in practice, the answer includes tuning. Even excellent equipment can perform badly if the antenna is not matched properly. [SWR checking](https://cbradio.co.uk/product-category/tools/) is part of the job, not an optional extra for enthusiasts. A badly tuned aerial can reduce range and, in some cases, put unnecessary strain on the radio. A properly tuned one helps the whole setup work as intended. This is one reason starter kits can be appealing for beginners, especially when they bundle compatible parts. Even then, you still need to install and tune them correctly. If you are changing the mount position, the coax length, or the vehicle, check the setup again. Small changes can alter performance more than people expect. ## Best CB setup by use case For a daily road car or pickup, the best setup is usually a compact radio, medium mobile aerial, discreet mount and direct battery connection. You want something that works well, does not dominate the cabin, and can cope with everyday driving without becoming a chore. For a green laner or off-road 4×4, toughness is key. A durable radio, flexible aerial, heavy-duty mount and protected cable routing usually beat a more delicate high-performance arrangement. Off-road vehicles shake, twist and get covered in mud. The setup needs to handle that. For a lorry or commercial vehicle, clarity and ease of use matter most. Drivers often benefit from a clear front-facing speaker, large controls and a reliable antenna mount suited to the vehicle body. Long hours on the road favour equipment that is simple and consistent rather than flashy. For a home station, antenna height becomes the main priority. A decent base antenna mounted safely and as high as practical will usually do more for range than changing the radio itself. If local conditions are noisy, careful siting and decent coax become even more important. ## Common mistakes to avoid The most common mistake is buying the radio first and treating the aerial as an afterthought. The second is choosing an antenna purely by length without considering where it will be mounted. The third is poor installation – weak grounding, messy wiring, bad connectors or no SWR check. Another mistake is chasing range figures without being realistic about terrain. CB is affected by hills, buildings, trees and vehicle position. No setup can ignore geography. A properly installed mobile rig in open country may perform very differently from the same rig in built-up areas. There is also the issue of expectations. If you want dependable short-range communication between vehicles on a trip, a sensible mobile setup is ideal. If you expect mobile-to-mobile communication across huge distances all day, you will likely be disappointed. CB works best when the setup is practical and the expectations are grounded. ## So what should you actually buy? Start with how you use the vehicle. If you are mainly on the road, choose a straightforward radio and a good medium-length aerial. If you are off-road every weekend, put more thought into mount strength, aerial flexibility and cable protection. If you are building a homebase station, focus on antenna height and a stable power supply. If you are unsure, a matched starter kit is often the safest route because it removes some of the guesswork. That is especially true for first-time buyers who want compatible parts rather than a box of separate items that may or may not suit each other. A specialist retailer such as CB Radio UK can also help you avoid mismatched gear and choose something that suits your vehicle rather than someone else’s build. The best CB radio setup is the one you will actually use, trust and keep working. Good installation beats gimmicks, a well-chosen aerial beats an over-specced radio, and honest advice beats buying twice. If you are between two options, go for the setup that fits your vehicle properly and leaves room to improve later. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/what-is-the-best-cb-radio-setup/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/what-is-the-best-cb-radio-setup/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/what-is-the-best-cb-radio-setup/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/what-is-the-best-cb-radio-setup/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20What%20Is%20the%20Best%20CB%20Radio%20Setup%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fwhat-is-the-best-cb-radio-setup%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/what-is-the-best-cb-radio-setup/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/what-is-the-best-cb-radio-setup/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/what-is-the-best-cb-radio-setup/?share=telegram) - **Categories:** Uncategorised --- ### [Why A CB Radio Is A Good Investment](https://cbradio.co.uk/why-a-cb-radio-is-a-good-investment/) **Published:** January 5, 2019 **Author:** Jan **Excerpt:** **Content:** Citizen band (CB) radios are a great piece of kit to buy, especially if you find yourself out and about in remote areas on a regular basis. The team over at [Popular Mechanics](https://www.popularmechanics.com/adventure/a22818698/two-way-radio-ham-cb-gmrs/) have recently been explaining why it’s worth picking up a CB radio for everyday use. So, why choose a [CB radio](https://www.cbradio.co.uk/cb-radio.html)? One of their main advantages is that you don’t need a licence to operate one. That means you can get started using it as soon as you pick it up from the shop. They are also an affordable option, so if you’re looking for a way to communicate with others that isn’t a mobile phone, this is a great choice. You might be wondering why CB radios still have a place in this era of constantly-on mobiles. Well, not everywhere has reliable mobile phone signal and a CB radio can be a godsend in this situation. If you work in more remote areas, or run a farm and have multiple employees across your land, they are a good investment. You should be aware that they don’t typically have a range of more than 15 miles, and their signal can be line-of-sight sensitive, according to the website, which means if you’re mobile you might lose signal occasionally. They’re also a good piece of equipment for businesses to use, especially the likes of construction companies that may have multiple employees spread across a site and need a reliable (and weather-proof) way of communicating with one another. Earlier this year, [Farming UK](https://www.farminguk.com/News/What-two-way-radio-2018-A-farmers-guide_48830.html) highlighted the merits of CB radios in agriculture over mobile phones, noting that one of the big advantages is that everyone can hear the messages over the radio channel without having to stop what they’re doing to pick the radio up. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/why-a-cb-radio-is-a-good-investment/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/why-a-cb-radio-is-a-good-investment/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/why-a-cb-radio-is-a-good-investment/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/why-a-cb-radio-is-a-good-investment/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Why%20A%20CB%20Radio%20Is%20A%20Good%20Investment&body=https%3A%2F%2Fcbradio.co.uk%2Fwhy-a-cb-radio-is-a-good-investment%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/why-a-cb-radio-is-a-good-investment/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/why-a-cb-radio-is-a-good-investment/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/why-a-cb-radio-is-a-good-investment/?share=telegram) - **Categories:** Uncategorised --- ### [Top Tips For A Fun And Safe Off-Roading Adventure](https://cbradio.co.uk/top-tips-for-a-fun-and-safe-off-roading-adventure/) **Published:** March 20, 2019 **Author:** Jan **Excerpt:** **Content:** If you’re keen to do some off road exploring with friends or family, there are a few precautions you should take to ensure that your journey is a fun and safe one. [Hotcars](https://www.hotcars.com/basic-off-roading-tips-and-mistakes-guaranteed-to-get-people-stuck/) recently offered some advice to anyone planning to go off-roading. One of the most important is to always go with a friend, because they will be able to help you if your vehicle breaks down, gets stuck or if you get injured. It’s sensible to have [CB radios](https://www.cbradio.co.uk/cb-radio.html) too, so that you can call for help if you’re in an area where mobile phone signal is patchy or non-existent. Knowing how your vehicle works, particularly the traction control, is vital, as is having a good understanding of your ground clearance to prevent you getting stuck on any obstacles you’re trying to go over. If you’re new to off-roading, it’s advisable to have a spotter who’s more experienced than you in the vehicle. They can warn you about upcoming obstacles, and ensure you navigate them safely. Once you’re out on the trails, the advice is to be flexible. If it doesn’t look safe to continue either because of the weather or if your vehicle is damaged, it’s much better to call it a day than carry on. If you are going to go off-roading, make sure you do so in an area where it’s permitted. [Spire FM](https://www.spirefm.co.uk/news/local-news/2804335/police-target-off-roading-on-salisbury-plain/) recently reported that police in Wiltshire are currently cracking down on drivers who go off-roading on Salisbury Plain because there are some who are failing to stick to the designated off-road routes. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/top-tips-for-a-fun-and-safe-off-roading-adventure/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/top-tips-for-a-fun-and-safe-off-roading-adventure/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/top-tips-for-a-fun-and-safe-off-roading-adventure/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/top-tips-for-a-fun-and-safe-off-roading-adventure/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Top%20Tips%20For%20A%20Fun%20And%20Safe%20Off-Roading%20Adventure&body=https%3A%2F%2Fcbradio.co.uk%2Ftop-tips-for-a-fun-and-safe-off-roading-adventure%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/top-tips-for-a-fun-and-safe-off-roading-adventure/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/top-tips-for-a-fun-and-safe-off-roading-adventure/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/top-tips-for-a-fun-and-safe-off-roading-adventure/?share=telegram) - **Categories:** Uncategorised --- ### [Top Locations To Go Off-Roading In 2019](https://cbradio.co.uk/top-locations-to-go-off-roading-in-2019/) **Published:** August 2, 2019 **Author:** Jan **Excerpt:** **Content:** If you want to make 2019 the year of adventure, why not embark on some off-roading experiences that will certainly get your heart pumping. Here is our pick of the best locations in the UK to enjoy a 4×4 getaway over the next 12 months. ### ­Ultra Adventure Driving If you are relatively new to off-roading, Ultra Adventure Driving could be the ideal place to start. It provides training sessions to teach everything from the basics to advanced techniques, so you are equipped with the right skills to enjoy your adventure. What’s more, its sites offer both purpose-built courses as well as natural terrain, enabling drivers of all abilities to find what they want here. Novice motorists will be able to explore gentle slopes, while those with more experience under their belt can venture out on to muddy hills, ditches, and river crossings, and even tackle rocky climbs. With [20 sites across the UK](http://www.ultraadventuredriving.co.uk), you are likely to be able to access an Ultra Adventure Driving course wherever you are. ### Silverstone Though perhaps better known for its Formula-One circuit and fast car tracks, Silverstone also offers great opportunities for those in four-wheeled drives. Do not think you will be let off easily with the course here, as it is full of big drops, water sections, and steep slopes. This is a great track for those who love getting behind the wheel, and will challenge your precision handling. ### True Grip Off Road Limited True Grip is based on the Eastwell Park Estate in Kent, making it an ideal location for those living in south-east England. However, it might also be worth the drive to get to it wherever you are in the UK, as it offers some great tracks for off-roaders. You can find everything you need here, no matter what your experience is, with its professional training sessions, exclusive hire, and highly experienced instructors. It also has [junior off-road courses](http://www.truegripoffroad.co.uk/junior/), so if you fancy getting your young ones involved in your passion, this could be the ideal place to head to. ### Greenlanes Of course, many off-roaders prefer a more authentic experience, and prefer heading out into the wilderness to purpose-built courses. If this sounds like you, take a look at the best green lane sites in the UK at the [Green Lane Association](https://www.glass-uk.org). The best way to find green roads is to get hold of your local Ordnance Survey Map and look for Public Rights of Way that are Byways Open to All Traffic (BOAT) or ORPA, UCR or Unclassified Road under lanes that are labelled Other Public Access. Once you have established it is legal to drive along a route, it is a good idea to check whether they are actually passable by looking on TrailWise. Or if you want to be totally sure, go to your council’s Right Of Way Department and ask for its Definite Map. This may sound like a lot of wok, but it will be worth it when you find a route that allows you to enjoy the ultimate, genuine off-road experience while remaining safe. Wherever you choose to go, do not forget to pack a good-quality [CB Radio Aerials](https://www.cbradio.co.uk/cb-aerials-ham-antennas.html), so you can get in touch with emergency services and have two-way communication throughout your experience. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/top-locations-to-go-off-roading-in-2019/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/top-locations-to-go-off-roading-in-2019/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/top-locations-to-go-off-roading-in-2019/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/top-locations-to-go-off-roading-in-2019/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Top%20Locations%20To%20Go%20Off-Roading%20In%202019&body=https%3A%2F%2Fcbradio.co.uk%2Ftop-locations-to-go-off-roading-in-2019%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/top-locations-to-go-off-roading-in-2019/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/top-locations-to-go-off-roading-in-2019/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/top-locations-to-go-off-roading-in-2019/?share=telegram) - **Categories:** Uncategorised --- ### [New Film About Man’s Lifelong Dream Of Flying Finally Released](https://cbradio.co.uk/new-film-about-mans-lifelong-dream-of-flying-finally-released/) **Published:** April 10, 2019 **Author:** Jan **Excerpt:** **Content:** A documentary about an elderly’s man lifelong ambition to fly a plane is set to hit the big screens in Irish cinemas later this month. The Man Who Wanted To Fly has been shot by filmmaker Frank Shouldice and cinematographer Dave Perry over the course of five and a half years, but the completed product is now ready to be seen by the general public. The film, which focuses on Bobby Coote’s goal to take to the skies and his brother’s reservations that flying is best left to birds, will be showcased at cinemas from April 29th. Viewers can expect to learn about the 80-something-year-old brothers’ modest life in rural Cavan and their relationship with each other, having lived next door to one another for a long time. While Bobby is known for wanting to put his goal into action in his golden years, Ernie is content with hobbies such as gardening and his CB radio collection. Having been around since 1945, [CB radios sales](https://www.cbradio.co.uk/history-of-cb-radio.html) went through the roof in the 1970s, particularly among tradesmen who used them as a means to communicate with colleagues. This is why they remain so popular among the older generations. A [review in the Irish Times](https://www.irishtimes.com/culture/film/the-man-who-wanted-to-fly-a-cavan-man-in-search-of-his-dream-1.3839206), which gave the film four out of five stars, said: “This is not just a story of the brothers; it’s a story of the community around them.” Tara Brady, reviewing the documentary for the news provider, went on to say: “Bobby is helped towards his goal by friends and neighbours, including Sean McBride, a farmer who sets aside land for a runway and helps Bobby build a hangar for the Microlight craft he buys with his savings.” Ms Brady added that the cinematography, together with the characters and Shouldice’s direction has created “a marvellous feel-good movie”. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/new-film-about-mans-lifelong-dream-of-flying-finally-released/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/new-film-about-mans-lifelong-dream-of-flying-finally-released/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/new-film-about-mans-lifelong-dream-of-flying-finally-released/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/new-film-about-mans-lifelong-dream-of-flying-finally-released/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20New%20Film%20About%20Man%E2%80%99s%20Lifelong%20Dream%20Of%20Flying%20Finally%20Released&body=https%3A%2F%2Fcbradio.co.uk%2Fnew-film-about-mans-lifelong-dream-of-flying-finally-released%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/new-film-about-mans-lifelong-dream-of-flying-finally-released/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/new-film-about-mans-lifelong-dream-of-flying-finally-released/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/new-film-about-mans-lifelong-dream-of-flying-finally-released/?share=telegram) - **Categories:** Uncategorised --- ### [New 4x4s Will Help Council Reach Remote Areas](https://cbradio.co.uk/new-4x4s-will-help-council-reach-remote-areas/) **Published:** April 16, 2019 **Author:** Jan **Excerpt:** **Content:** North Lanarkshire Council has acquired two new 4x4s to help the local authority gain access to more rural locations in the region. An article in [Motherwell Times revealed](https://www.motherwelltimes.co.uk/news/transport/new-4x4s-will-help-council-services-reach-remote-areas-in-north-lanarkshire-1-4905135) it has taken delivery of the SsangYong Korando vehicles so the council can get more involved in community projects that are in remote areas. The Justices Services Team will be mainly using the motors to help with their assessment and management of offenders, while the vehicles will also allow home care workers to travel to different sites more easily thanks to their all-terrain tyres. Speaking with news provider, placement manager for the Justice Services Community Payback Team Jim Curtis said: “Out Justice Services Team want to ensure that the local community is confident that they’re working hard to reduce the risk of harm to local people, that it’s addressing victim issues, and that it’s contributing to the rehabilitation of offenders.” He added the Korandos will enable the team to “engage with harder-to-reach rural communities and, in addition, will be an asset helping home care workers travel around in dubious weather”. Frasers of Falkirk delivered the 4x4s to the local authority earlier this month, with principal dealer David Wishart telling the newspaper the motors will be “great assistance” to the council in boosting its community engagement. Something users of the vehicles will need when accessing these remote locations is a [CB network radio](https://www.cbradio.co.uk/manuals.html). This will enable them to stay in contact with others at the council and get in touch should they require assistance, for example if they break down or meet inclement weather conditions. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/new-4x4s-will-help-council-reach-remote-areas/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/new-4x4s-will-help-council-reach-remote-areas/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/new-4x4s-will-help-council-reach-remote-areas/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/new-4x4s-will-help-council-reach-remote-areas/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20New%204x4s%20Will%20Help%20Council%20Reach%20Remote%20Areas&body=https%3A%2F%2Fcbradio.co.uk%2Fnew-4x4s-will-help-council-reach-remote-areas%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/new-4x4s-will-help-council-reach-remote-areas/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/new-4x4s-will-help-council-reach-remote-areas/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/new-4x4s-will-help-council-reach-remote-areas/?share=telegram) - **Categories:** Uncategorised --- ### [Coast-to-coast Speed Record Car Updated With Latest Technology](https://cbradio.co.uk/coast-to-coast-speed-record-car-updated-with-latest-technology/) **Published:** March 28, 2019 **Author:** Jan **Excerpt:** **Content:** It has been 13 years since Matt Figliola decked out a vehicle with the latest radar, radio, GPS monitoring system and performance equipment to journey across America. His efforts were not in vain, and he managed to create the best coast-to-coast speed record car of the time, travelling across the US in just 32 hours and seven minutes. However, this record was set in 1983 and many car technologies have vastly improved since then, including the introduction of dashcams and GoPros. Despite this, Matt and his team managed to break a record with Alex Roy’s – from [The Drive](https://www.thedrive.com/video/27055/the-time-capsule-tech-that-helped-set-a-coast-to-coast-driving-record) – E39 Polizei BMW M5 vehicle. After he stopped by Matt’s shop Ai Design all those years ago, the car fitter could not help but be sucked into the exciting challenge. They managed to pull it off by installing the vehicle with Kelleners sports exhaust, Kelleners swaybards, Specterguard anti-photo license plate covers for both the front and rear of the vehicle, a Dinan stage-one chip, Brembo GT brake kits and UUC short throw shift kit. The team also used a Uniden PRO520 XL CB Radio in custom overhead mount to help the driver keep contact throughout the journey, while a L3 ‘Night Driver’ thermal camera was installed in the front bumper with twin Alpine seven-inch displays fitted for the driver and co-pilot. Among the other technologies used were a Garmin 2650 GPS unit with dead reckoning and roof mount antenna, an internal XM antenna, Nav-TV integrated in OEM-Dash display, and a dash-mounted speedometer GPS-verified and slaved to wheelspin. The project has recently been part of APEX’s documentary entitled APEX: The Secret Race Across America, which is due to hit screens in April this year. This will look at how new technologies could be used to break the impressive record of the 1980s. Many people still rely on [CB network radios](https://www.cbradio.co.uk/cb-radio.html) as an essential part of their motoring experience, allowing them to maintain communication during their drive. To find out more, [get in touch with us](https://www.cbradio.co.uk/contact-us.html) today. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/coast-to-coast-speed-record-car-updated-with-latest-technology/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/coast-to-coast-speed-record-car-updated-with-latest-technology/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/coast-to-coast-speed-record-car-updated-with-latest-technology/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/coast-to-coast-speed-record-car-updated-with-latest-technology/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Coast-to-coast%20Speed%20Record%20Car%20Updated%20With%20Latest%20Technology&body=https%3A%2F%2Fcbradio.co.uk%2Fcoast-to-coast-speed-record-car-updated-with-latest-technology%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/coast-to-coast-speed-record-car-updated-with-latest-technology/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/coast-to-coast-speed-record-car-updated-with-latest-technology/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/coast-to-coast-speed-record-car-updated-with-latest-technology/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radios: Helping Truckers Forge Friendships](https://cbradio.co.uk/cb-radios-helping-truckers-forge-friendships/) **Published:** February 20, 2019 **Author:** Jan **Excerpt:** **Content:** In the modern world of the internet and smartphones, you might be wondering whether [CB radios](https://www.cbradio.co.uk/cb-radio.html) still have a place. But in some sectors, they’re very much an important part of daily life. For long-distance truckers, they are seen as an essential communication tool. An article for [Aggregates Manager](https://www.aggman.com/rock-stars-graniterocks-ricki-mancebo-and-dave-engelking/) recently told the story of two truckers who have built a friendship over the radio waves. Ricki Mancebo and Dave Engelking are both drivers in the Graniterock transportation team. They can each cover up to 400 miles a day, and when you’re driving long distances in a cab, it can be a little lonely. The pair have both been working for the firm for decades, and due to their years of experience behind the wheel are often the ones called upon for difficult delivery jobs or to help with the training and mentoring of new staff. Ms Mancebo also has the honour of being the longest-serving female driver in the firm’s history, having started with them back in 1978. She added that because it can be such a challenging job, everyone on the team has one another’s backs. “We’re here to build confidence, not to tear each other down,” she asserted. Although her and Mr Engelking are rarely in the same physical location at the same time, they spend hours chatting back and forth on their two-way radios while making their deliveries. And it’s not only truckers who use CB radios. Barry May, who has stood on a bridge over the busy A19 road in the UK for years giving friendly waves to motorists, also uses a CB radio to chat to the truckers on his route. However, recently he’s been without his radio so a few of the truckers who regularly drive on this stretch of road have offered to replace it for him, [Teesside Live](https://www.gazettelive.co.uk/news/teesside-news/barry-youre-legend-a19-waving-14308987) reported. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radios-helping-truckers-forge-friendships/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radios-helping-truckers-forge-friendships/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radios-helping-truckers-forge-friendships/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radios-helping-truckers-forge-friendships/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radios%3A%20Helping%20Truckers%20Forge%20Friendships&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radios-helping-truckers-forge-friendships%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radios-helping-truckers-forge-friendships/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radios-helping-truckers-forge-friendships/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radios-helping-truckers-forge-friendships/?share=telegram) - **Categories:** Uncategorised --- ### [CB Radios ‘Allow Communication Free Of Restraint’](https://cbradio.co.uk/cb-radios-allow-communication-free-of-restraint/) **Published:** May 22, 2019 **Author:** Jan **Excerpt:** **Content:** In this day and age when we have communication tools at our fingertips, many people favour using their smartphones, tablets or computers over old-fashioned radios. However, there is still a time and place for [CB radios](https://www.cbradio.co.uk/about-us.html), particularly because they let people communicate without being restricted about what they say. This is according to Ellie McFarland who wrote an [article for 71 Republic](https://71republic.com/2019/05/06/cb-radio-wild-west/) about the benefits of CB radios, and why these should still be popular devices. She told the readers about her father who used to visit West Virginia when he was in college during the 1980s. He would use a ham radio (amateur radio) when he was climbing in the trees to talk with other students across the campus, as this was the only form of remote communication available in those days. While he was tempted to use the ham radio to order a pizza from the local pizzeria, he was prevented from doing so because the signal was only for non-commercial purposes. However, the great thing about CB radios is there are no such restrictions or regulations. Across 40 channels, people can talk about anything they want, whether they wish to discuss plans to overthrow the government; talk in a vulgar manner; or broadcast copyrighted songs. These days, the internet is more regulated than CB radio, as the FCC does not see the small number of people who regularly utilise the radio network as a threat. “Although CB radio is public, its simplicity and antiquity is the advantage. They’re nearly undetectable and unrestricted – legally or illegally,” wrote Ms McFarland. She went on to say: “It’s important to employ these alternative communication methods when we can. Non-violently evading government reach where you can is one of the most effective ways to fight against it.” CB radios, although first invented in 1945 by Al Gross, became popular during the [1970s](https://www.cbradio.co.uk/history-of-cb-radio.html) when they were used by drivers, as well as businesses. The oil crisis of 1973 meant truckers needed a way to communicate which gas stations had enough fuel for them, eventually leading to additional channels being added to the network. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radios-allow-communication-free-of-restraint/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radios-allow-communication-free-of-restraint/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radios-allow-communication-free-of-restraint/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radios-allow-communication-free-of-restraint/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radios%20%E2%80%98Allow%20Communication%20Free%20Of%20Restraint%E2%80%99&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radios-allow-communication-free-of-restraint%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radios-allow-communication-free-of-restraint/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radios-allow-communication-free-of-restraint/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radios-allow-communication-free-of-restraint/?share=telegram) - **Categories:** Uncategorised --- ### [Automotive Communications: What Are The Options?](https://cbradio.co.uk/automotive-communications-what-are-the-options/) **Published:** May 31, 2019 **Author:** Jan **Excerpt:** **Content:** We’re used to being in a world where we’re always connected. Whether it’s through our computers or our smartphones, the rest of the world is just a few clicks away. When we’re driving, we obviously can’t use our mobile devices, so automakers have developed a range of communication tools to ensure we can still get hold of people even while we’re in our cars. [Marketwatch](https://www.marketwatch.com/press-release/automotive-communication-technology-market-size-2019-global-industry-trends-analysis-forecast-to-2024-2019-05-17) recently revealed that the automotive communication sector is expected to post a compound annual growth rate of 16 per cent in the years to 2024. One of the factors driving its growth is increased driver awareness over safety. Most of the in-car communication systems involve either a standard mobile signal or Bluetooth connection. Many new vehicles come equipped with in-car, user-friendly infotainment systems. These enable you to connect your smartphone to the vehicle’s system and thereby answer calls using voice commands. But what about if you don’t have the latest vehicle, or if you tend to be driving in areas where mobile phone signal is patchy at best? In these cases, it could be wise to invest in a [CB radio](https://www.cbradio.co.uk/). In the UK, the law allows you to use a CB radio while driving, provided that it doesn’t double up as a mobile phone. This can give you a vital communication link if you’re in an area with no phone signal and need to contact someone quickly. Just make sure you do your research on how to set up your CB radio system and how to use it so that it’s ready should you need it when you’re out on the trails. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/automotive-communications-what-are-the-options/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/automotive-communications-what-are-the-options/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/automotive-communications-what-are-the-options/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/automotive-communications-what-are-the-options/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Automotive%20Communications%3A%20What%20Are%20The%20Options%3F&body=https%3A%2F%2Fcbradio.co.uk%2Fautomotive-communications-what-are-the-options%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/automotive-communications-what-are-the-options/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/automotive-communications-what-are-the-options/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/automotive-communications-what-are-the-options/?share=telegram) - **Categories:** Uncategorised --- ## Pages ### [Home](https://cbradio.co.uk/) **Published:** January 20, 2020 **Author:** Jan **Content:** [# Welcome To UK 4x4, Norfolk CB Centre Selling CB radio equipment and antennas for off road use. Learn More ](/about-us/) [# CB RAdio Check out our range of CB Radio equipment. Shop Now ](/about-us/) [# Contact Us Got a question? Get in touch below Learn More ](/about-us/) ## CB RADIO AND AERIALS FOR ON AND OFF ROAD USE ### Popular Categories at CB Radio ![feat cat 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/01/feat-cat-1.jpg?fit=500%2C500&ssl=1 "feat cat 1 - CB Radio UK") Network Radio [](https://cbradio.co.uk/product-category/network-radio/) ![feat cat 2](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/01/feat-cat-2.jpg?fit=500%2C500&ssl=1 "feat cat 2 - CB Radio UK") CB Radio [](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/) ![feat cat 3](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/01/feat-cat-3.jpg?fit=500%2C500&ssl=1 "feat cat 3 - CB Radio UK") CB Radio Aerials [](https://cbradio.co.uk/product-category/cb-aerials/) ![feat cat 4](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/01/feat-cat-4.jpg?fit=500%2C500&ssl=1 "feat cat 4 - CB Radio UK") CB Accessories [](https://cbradio.co.uk/product-category/cb-radios-and-accessories/cb-radio-accessories/) ### Featured Products Browse our range of products at CB radio UK 66 in stock [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/02/1-268.jpg?resize=400%2C314&ssl=1) ](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/) [RG213](https://cbradio.co.uk/product-category/coax-cable/rg213/) [rg213 15m 49 foot mil spec LOW LOSS with 2 x PL259 connectors £38.99 ](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7446) 41 in stock [ ![57 1147](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/02/57-1147.jpg?resize=332%2C1024&ssl=1) ](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/) [Mini Stinger](https://cbradio.co.uk/product-category/cb-aerials/mini-stingers/) [Chrome mini Springer 4×4 CB aerial stinger small Orbitor antenna £18.49 ](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7413) 23 in stock [ ![PNIMK9500 1 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/07/PNIMK9500_1_1.jpg?resize=1024%2C1024&ssl=1) ](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/) [CB Radio Microphones](https://cbradio.co.uk/product-category/cb-radio-accessories/cb-radio-microphones/) [Replacement Mic Microphone for PNI 9500 £21.99 ](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7356) 10 in stock (can be backordered) [ ![PNI HP40 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/06/PNI-HP40_1.jpg?resize=1024%2C1024&ssl=1) ](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/) [PNI](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/pni-cb-radio/) [PNI Escort HP40 Multi-Standard CB Radio £119.99 ](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7295) 5 in stock [ ![PNIDR735E 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/PNIDR735E_1.jpg?resize=1000%2C1000&ssl=1) ](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/) [VHF UHF Transceivers](https://cbradio.co.uk/product-category/amateur-radio/vhf-uhf-transceivers/) [Alinco DR-735E 145/433 MHz NEW Dual Band amateur radio Transceiver with DTMF Mic £354.99 ](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7248) 2 in stock [ ![at 779uv](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/at-779uv.jpg?resize=1000%2C1000&ssl=1) ](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/) [VHF UHF Transceivers](https://cbradio.co.uk/product-category/amateur-radio/vhf-uhf-transceivers/) [Anytone AT-779UV Dual Band mini mobile radio Pre Programmed £89.99 ](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7242) 5 in stock [ ![titan](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/titan.webp?resize=1024%2C855&ssl=1) ](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/) [HF Transceivers](https://cbradio.co.uk/product-category/amateur-radio/hf-transceivers/), [Moonraker](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/moonraker-cb-radio/) [Moonraker Titan 10m Multi-Mode AM FM SSB CW Transceiver £154.99 ](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7229) Got a question for Cb Radio UK? Contact Us - 01842879237 - [ sales@cbradio.co.uk ](mailto:sales@cbradio.co.uk%20) - 07985-170973 First Name Last Name Email Message Send Message ### Best Selling Shop our best selling products at CB Radio UK [![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/02/1-268.jpg?resize=400%2C314&ssl=1)](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/) [rg213 15m 49 foot mil spec LOW LOSS with 2 x PL259 connectors](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/) £38.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7446) [![57 1147](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/02/57-1147.jpg?resize=486%2C1500&ssl=1)](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/) [Chrome mini Springer 4×4 CB aerial stinger small Orbitor antenna](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/) £18.49 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7413) [![PNIMK9500 1 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/07/PNIMK9500_1_1.jpg?resize=768%2C768&ssl=1)](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/) [Replacement Mic Microphone for PNI 9500](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/) £21.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7356) [![PNI HP40 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/06/PNI-HP40_1.jpg?resize=768%2C768&ssl=1)](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/) [PNI Escort HP40 Multi-Standard CB Radio](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/) £119.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7295) [![PNIDR735E 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/PNIDR735E_1.jpg?resize=768%2C768&ssl=1)](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/) [Alinco DR-735E 145/433 MHz NEW Dual Band amateur radio Transceiver with DTMF Mic](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/) £354.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7248) [![at 779uv](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/at-779uv.jpg?resize=768%2C768&ssl=1)](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/) [Anytone AT-779UV Dual Band mini mobile radio Pre Programmed](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/) £89.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7242) [![titan](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/titan.webp?resize=768%2C641&ssl=1)](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/) [Moonraker Titan 10m Multi-Mode AM FM SSB CW Transceiver](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/) £154.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7229) [![PNIFLEX47 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/PNIFLEX47_1.jpg?resize=768%2C768&ssl=1)](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/) [Tactical foldable CB hand held antenna aerial BNC](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/) £22.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7198) [![PNIHP60 1 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/PNIHP60_1_1.jpg?resize=768%2C768&ssl=1)](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/) [PNI Escort 60 High Power multistandard, FM/AM, 12V, ASQ, RF Gain](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/) £129.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7122) [![s l1600 51](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/03/s-l1600-51.webp?resize=575%2C434&ssl=1)](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/) [Sirio Signal Keeper CB Base or Loft Antenna](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/) £59.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=6973) [![s l1600 71](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/03/s-l1600-71.webp?resize=768%2C768&ssl=1)](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/) [Midland 78 Pro Multi CB Radio 4W AM FM EU UK](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/) £109.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=6965) [![PNIDBA27 2](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/01/PNIDBA27_2.jpg?resize=768%2C768&ssl=1)](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/) [MAAS YELLOWSTAR-27 5/8 Wave CB Base Antenna](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/) £84.99 [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=6934) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Home&body=https%3A%2F%2Fcbradio.co.uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/?share=telegram) - --- ### [Shop](https://cbradio.co.uk/shop-at-cb-radio-co-uk/) **Published:** March 4, 2020 **Author:** Jan **Content:** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/shop-at-cb-radio-co-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/shop-at-cb-radio-co-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/shop-at-cb-radio-co-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/shop-at-cb-radio-co-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Shop&body=https%3A%2F%2Fcbradio.co.uk%2Fshop-at-cb-radio-co-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/shop-at-cb-radio-co-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/shop-at-cb-radio-co-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/shop-at-cb-radio-co-uk/?share=telegram) - --- ### [Refund and Returns Policy](https://cbradio.co.uk/refund_returns/) **Published:** September 1, 2021 **Author:** Jan **Content:** **This is a sample page.** Our refund and returns policy lasts 30 days. If 30 days have passed since your purchase, we can’t offer you a full refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases. Additional non-returnable items: - Gift cards - Downloadable software products - Some health and personal care items To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer. There are certain situations where only partial refunds are granted: - Book with obvious signs of use - CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened. - Any item not in its original condition, is damaged or missing parts for reasons not due to our error. - Any item that is returned more than 30 days after delivery Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days. **Late or missing refunds** If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at {email address}. **Sale items** Only regular priced items may be refunded. Sale items cannot be refunded. We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at {email address} and send your item to: {physical address}. If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you. If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and they will find out about your return. To return your product, you should mail your product to: {physical address}. You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund. Depending on where you live, the time it may take for your exchanged product to reach you may vary. If you are returning more expensive items, you may consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item. Contact us at {email} for questions related to refunds and returns. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/refund_returns/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/refund_returns/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/refund_returns/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/refund_returns/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Refund%20and%20Returns%20Policy&body=https%3A%2F%2Fcbradio.co.uk%2Frefund_returns%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/refund_returns/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/refund_returns/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/refund_returns/?share=telegram) - --- ### [Contact Us](https://cbradio.co.uk/contact-us-cbradio-co-uk/) **Published:** January 20, 2020 **Author:** Jan **Content:** ## Got a question? ## Contact Us - 01842879237 - [ sales@cbradio.co.uk ](mailto:sales@cbradio.co.uk) - 07985-170973 First Name Last Name Email Message Send Message ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/contact-us-cbradio-co-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/contact-us-cbradio-co-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/contact-us-cbradio-co-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/contact-us-cbradio-co-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Contact%20Us&body=https%3A%2F%2Fcbradio.co.uk%2Fcontact-us-cbradio-co-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/contact-us-cbradio-co-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/contact-us-cbradio-co-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/contact-us-cbradio-co-uk/?share=telegram) - --- ### [CB 10 Codes](https://cbradio.co.uk/cbradio-co-uk-10-codes/) **Published:** March 12, 2020 **Author:** Jan **Content:** The following is a list of CB radio “10 codes” (or APCO codes). Ten codes are an abbreviated way of sending messages, some of which are very common among those that use CB radios frequently or professionally. If you’re new to the CB world, take a look at the list below to get familiar with some codes you may hear. As you can imagine, some are more popular than others. I don’t recommend that you memorize the list below, just use it as a reference if you hear something that you’re not sure about. Radio 10 Codes - 10-0 Caution - 10-1 Unable to copy — change location - 10-2 Signal good - 10-3 Stop transmitting - 10-4 Acknowledgement (OK) - 10-5 Relay - 10-6 Busy — stand by unless urgent - 10-7 Out of service - 10-8 In service - 10-9 Repeat - 10-10 Fight in progress - 10-11 Dog case - 10-12 Stand by (stop) - 10-13 Weather — road report - 10-14 Prowler report - 10-15 Civil disturbance - 10-16 Domestic disturbance - 10-17 Meet complainant - 10-18 Quickly - 10-19 Return to … - 10-20 Location - 10-21 Call … by telephone - 10-22 Disregard - 10-23 Arrived at scene - 10-24 Assignment completed - 10-25 Report in person (meet) … - 10-26 Detaining subject, expedite - 10-27 Drivers license information - 10-28 Vehicle registration information - 10-29 Check for wanted - 10-30 Unnecessary use of radio - 10-31 Crime in progress - 10-32 Man with gun - 10-33 Emergency - 10-34 Riot - 10-35 Major crime alert - 10-36 Correct time - 10-37 (Investigate) suspicious vehicle - 10-38 Stopping suspicious vehicle - 10-39 Urgent — use light, siren - 10-40 Silent run — no light, siren - 10-41 Beginning tour of duty - 10-42 Ending tour of duty - 10-43 Information - 10-44 Permission to leave … for … - 10-45 Animal carcass at … - 10-46 Assist motorist - 10-47 Emergency road repairs at … - 10-48 Traffic standard repair at … - 10-49 Traffic light out at … - 10-50 Accident (fatal, personal injury, property damage) - 10-51 Wrecker needed - 10-52 Ambulance needed - 10-53 Road blocked at … - 10-54 Livestock on highway - 10-55 Suspected DUI - 10-56 Intoxicated pedestrian - 10-57 Hit and run - 10-58 Direct traffic - 10-59 Convoy or escort - 10-60 Squad in vicinity - 10-61 Isolate self for message - 10-62 Reply to message - 10-63 Prepare to make written copy - 10-64 Message for local delivery - 10-65 Net message assignment - 10-66 Message cancellation - 10-67 Clear for net message - 10-68 Dispatch information - 10-69 Message received - 10-70 Fire - 10-71 Advise nature of fire - 10-72 Report progress on fire - 10-73 Smoke report - 10-74 Negative - 10-75 In contact with … - 10-76 En route … - 10-77 ETA (estimated time of arrival) - 10-78 Need assistance - 10-79 Notify coroner - 10-80 Chase in progress - 10-81 Breathalyzer - 10-82 Reserve lodging - 10-83 Work school xing at … - 10-84 If meeting … advise ETA - 10-85 Delayed due to … - 10-86 Officer/operator on duty - 10-87 Pick up/distribute checks - 10-88 Present telephone number of … - 10-89 Bomb threat - 10-90 Bank alarm at … - 10-91 Pick up prisoner/subject - 10-92 Improperly parked vehicle - 10-93 Blockade - 10-94 Drag racing - 10-95 Prisoner/subject in custody - 10-96 Mental subject - 10-97 Check (test) signal - 10-98 Prison/jail break - 10-99 Wanted/stolen indicated **Q Codes** **Radio Q Codes** **QRA**Name**QRB**Distance**QRG**Frequency**QRK**Intelligibility**QRL**Busy**QRM**Interference**QRN**Noise**QRO**High power**QRP**Low power**QRQ**High speed CW**QRS**Low speed CW**QRT**Close down station**QRV**Ready**QRX**Stand by**QRZ?**Who is calling me?**QSB**Fading**QSD**Defective keying**QSK**Break in**QSL**Confirmation or card to confirm contact**QSO**Radio contact**QSY**Change frequency**QTC**Message**QTH**Location**QTR**Time**Phonetic Alphabet** # Phonetic Alphabet LetterMorseNATOEnglishAmericanItalianGermanInternationalA\*-AlphaAndrewAbelAnconaAntonAmsterdamB-\*\*\*BravoBenjaminBakerBolognaBertaBaltimoreC-\*-\*CharlieCharlieCharlieComoCasarCasablancaD-\*\*DeltaDavidDogDomodossolaDoraDenmarkE\*EchoEdwardEasyEmpoliEmilEdisionF\*\*-\*FoxtrotFredrickFoxFirenzeFriedrichFloridaG–\*GolfGeorgeGeorgeGenovaGustavGallipoliH\*\*\*\*HotelHarryHowHotelHeinrichHavanaI\*\*IndiaIsaacItemImolaIdaItalyJ\*—JulietJackJigI lungaJuliusJerusalemK-\*-KiloKingKingKursaalKaufmannKilogramL\*-\*\*LimaLucyLoveLivornoLudwigLiverpoolM—MikeMaryMikeMilanoMarthaMadagascarN-\*NovemberNelliNanNapoliNordpolNew YorkO—OscarOliverOboeOtrantoOttoOsloP\*–\*PapaPeterPeterPadovaPaulaParisQ–\*-QuebecQueenieQueenQuartoQuelleQuebecR\*-\*RomeoRobertRogerRomaRichardRomaS\*\*\*SierraSugarSugarSavonaSamuelSantiagoT–TangoTommyTareTorinoTheodorTripoliU\*\*-UniformUncleUncleUdineUlrichUppsalaV\*\*\*-VictorVictorVictorVeneziaViktorValenciaW\*–WhiskeyWilliamWilliamWashingtonWilhelmWashingtonX-\*\*-X-rayXmasX (eks)IcsXanthippeXanthippeY-\*–YankeeYellowYokeYorkYpsilonYokohamaZ–\*\*ZuluZebraZebraZaraZeppelinZurich**CEPT and UK frequencies** **CEPT and UK Citizen Band Frequency Allocation** **Channel** **Number** **CEPT/EU Band****Frequency** **(MHz)** **UK Band****Frequency** **(MHz)** 126.965027.60125226.975027.61125326.985027.62125427.005027.63125527.015027.64125627.025027.65125727.035027.66125827.055027.67125927.065027.681251027.075027.691251127.085027.701251227.105027.711251327.115027.721251427.125027.731251527.135027.741251627.155027.751251727.165027.761251827.175027.771251927.185027.781252027.205027.791252127.215027.801252227.225027.811252327.255027.821252427.235027.8312525 27.245027.841252627.265027.851252727.275027.861252827.285027.871252927.295027.881253027.305027.891253127.315027.901253227.325027.911253327.335027.921253427.345027.931253527.355027.941253627.365027.951253727.375027.961253827.385027.971253927.395027.981254027.405027.99125**Country Division Chart** 1 Italy 2 USA 3 Brazil 4 Argentina 5 Venezuela 6 Colombia 7 Netherlands Antilles 8 Peru 9 Canada 10 Mexico 11 Puerto Rico 12 Uruguay 13 Germany 14 France 15 Switzerland 16 Belgium 17 Hawaii 18 Greece 19 Netherlands 20 Norway 21 Sweden 22 Guiana French 23 Jamaica 24 Panama 25 Japan 26 England 27 Iceland 28 Honduras 29 Ireland 30 Spain 31 Portugal 32 Chile 33 Alaska 34 Canary Islands 35 Austria 36 San Marino 37 Dominican Republic 38 Greenland 39 Angola 40 Liechtenstein 41 New Zealand 42 Liberia 43 Australia 44 South Africa 45 Yugoslavia 46 East Germany 47 Denmark 48 Saudi Arabia 49 Balearic Islands 50 European Russia 51 Andorra 52 Faroer Islands 53 El Salvador 54 Luxembourg 55 Gibraltar 56 Finland 57 India 58 East Malaysia 59 Dodecanese Islands 60 Hong Kong 61 Ecuador 62 Guam 63 St. Helena 64 Senegal 65 Sierra Leone 66 Mauritania 67 Paraguay 68 North Ireland 69 Costa Rica 70 Samoa American 71 Midway Islands 72 Guatemala 73 Suriname 74 Namibia 75 Azores 76 Morocco 77 Ghana 78 Zambia 79 Philippines 80 Bolivia 81 San Andres & Providencia 82 Guantanamo Bay 83 Tanzania 84 Ivory Coast 85 Zimbabwe 86 Nepal 87 Yemen 88 Cuba 89 Nigeria 90 Crete 91 Indonesia 92 Libya 93 Malta 94 United Arab Emirates 95 Mongolia 96 Tonga 97 Israel 98 Singapore 99 Fiji 100 Korea Republic 101 Papua New Guinea 102 Kuwait 103 Haiti 104 Corsica 105 Botswana 106 Ceuta & Melilla 107 Monaco 108 Scotland 109 Hungary 110 Cyprus 111 Jordan 112 Lebanon 113 West Malaysia 114 Pakistan 115 Qatar 116 Turkey 117 Egypt 118 Gambia 119 Madeira 120 Antigua & Barbuda 121 Bahamas 122 Barbados 123 Bermuda 124 St. Paul & Amsterdam 125 Cayman Islands 126 Nicaragua 127 Virgin Islands American 128 Virgin Islands British 129 Macquarie Islands 130 Norfolk Island 131 Guyana 132 Marshall Islands 133 Northern Mariana Islands 134 Republic of Belau 135 Solomon Islands 136 Martinique 137 Isle of Man 138 Vatican 139 South Yemen 140 Antarctica 141 St. Pierre & Miquelon 142 Lesotho 143 St. Lucia 144 Eastern Island 145 Galapagos Islands 146 Algeria 147 Tunisia 148 Ascension Island 149 Laccadive Islands 150 Bahrain 151 Iraq 152 Maldives 153 Thailand 154 Iran 155 Taiwan 156 Cameroon 157 Montserrat 158 Trinidad & Tobago 159 Somalia 160 Sudan 161 Poland 162 Zaire 163 Wales 164 Togo 165 Sardinia 166 St. Maarten, Saba, St. Eustatius 167 Jersey Island 168 Mauritius 169 Guernsey Island 170 Burkina Faso 171 Svalbard Islands 172 New Caledonia 173 Reunion 174 Uganda 175 Chad 176 Central African Republic 177 Sri Lanka 178 Bulgaria 180 Oman 181 Syria 182 Guinea Republic 183 Benin 184 Burundi 185 Comoros 186 Djibouti 187 Kenya 188 Madagascar 189 Mayotte 190 Seychelles 191 Swaziland 192 Cocos Islands 193 Cocos – Keeling Islands 194 Dominica 195 Grenada 196 Guadeloupe 197 Vanuatu 198 Falkland Islands 199 Equatorial Guinea 200 South Shetland Islands 201 Polynesia French 202 Bhutan 203 China People’s Republic 204 Mozambique 205 Cape Verde 206 Ethiopia 207 St. Martin Island 208 Glorieuses Islands 209 Juan de Nova Island 210 Wallis & Futuna 211 Jan Mayen Island 212 Aland Islands 213 Market Reef 214 Congo 215 Gabon 216 Mali 217 Christmas Island 218 Belize 219 Anguilla 220 St. Vincent & Dependencies 221 South Orkney Islands 222 South Sandwich Islands 223 Samoa Western 224 Western Kiribati 225 Brunei Darussalam 226 Malawi 227 Rwanda 228 Chagos Islands 229 Heard Island 230 Micronesia 231 St. Peter & St. Paul Rocks 232 Aruba 233 Romania 234 Afghanistan 235 ITU Geneva 236 Bangladesh 237 Myanmar 238 Cambodia 239 Laos 240 Macao 241 Spratly Island 242 Vietnam 243 Agalega & St. Brandon Islands 244 Pagalu Island 245 Niger 246 Sao Tome & Principe 247 Navassa Island 248 Turks & Caicos Islands 249 Northern Cook Islands 250 Cook Islands 251 Albania 252 Revillagigedo Island 253 Andaman & Nicobar Islands 254 Mount Athos 255 Kerguelen Islands 256 Prince Edward & Marion Islands 257 Rodriguez Island 258 Tristan da Cunha & Gough Islands 259 Tromelin Island 260 Baker & Howland Islands 261 Chatham Islands 262 Johnston Island 263 Kermadec Islands 264 Kingman Reef 265 Central Kiribati 266 Eastern Kiribati 267 Kure Island 268 Lord Howe Island 269 Mellish Reef 270 Minami Torishima Island 271 Nauru 272 Niue 273 Jarvis & Palmyra Islands 274 Pitcairn Island 275 Tokelau Islands 276 Tuvalu 277 Sable Island 278 Wake Island 279 Willis Islets 280 Aves Island 281 Ogasawara Islands 282 Auckland & Campbell Islands 283 St. Kitts & Nevis 284 St. Paul Island 285 Fernando de Noronha Island 286 Juan Fernandez Island 287 Malpelo Island 288 San Felix & San Ambrosio 289 South Georgia Island 290 Trindade & Martim Vaz Islands 291 Dhekelia & Akrotiri 292 Abu-Ail & Jabal-At-Tair 293 Guinea Bissau 294 Peter 1st Island 295 Southern Sudan 296 Clipperton Island 297 Bouvet Island 298 Crozet Ilnds 299 Desecheo Island 300 West Sahara – Rio de Oro 301 Armenia 302 Asiatic Russia 303 Azerbaijan 304 Estonia 305 Franz Josef Land 306 Georgia 307 Kaliningradsk 308 Kazakhstan 309 Kyrgyzstan 310 Latvia 311 Lithuania 312 Moldova 313 Tajikistan 314 Turkmenistan 315 Ukraine 316 Uzbekistan 317 White Russia 318 Survey Military of Malta 319 United Nations – New York 320 Banaba Island 321 Conway Reef 322 Walvis Bay 323 Yemen 324 Penguin Island 325 Rotuma Island 326 Malyj Vytsotskj 327 Slovenia 328 Croatia 329 Czech 330 Slovakia 331 Bosnia Herzegovina 332 Macedonia 333 Eritrea 334 Korea Democratic People’s Rep 335 Pratas Island 336 Scarborough Reef 337 Austral Islands 338 Marquesas Islands 339 Temotu Islands 340 Palestine 341 East Timor 342 Chesterfield Islands 343 Ducie Island 344 Republic of Montenegro 345 Swain’s Island 346 St Barthelemy Island 347 Curacao 348 St. Maarten 349 Saba and St Eustatius 350 Bonaire ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cbradio-co-uk-10-codes/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cbradio-co-uk-10-codes/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cbradio-co-uk-10-codes/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cbradio-co-uk-10-codes/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%2010%20Codes&body=https%3A%2F%2Fcbradio.co.uk%2Fcbradio-co-uk-10-codes%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cbradio-co-uk-10-codes/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cbradio-co-uk-10-codes/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cbradio-co-uk-10-codes/?share=telegram) - --- ### [Manuals](https://cbradio.co.uk/cb-radio-manuals/) **Published:** January 20, 2020 **Author:** Jan **Content:** ## On this page you find User Manuals for a wide range of CB radio equipment Unlike our competitors WE DON’T charge for manuals. If your manual is not listed please consult the following link: **COBRA CB RADIO** - [Cobra 29LX EU](https://cbradio.co.uk/wp-content/uploads/2020/03/Folder_Cobra_29LX_EU_ENG.pdf) - [Cobra 75ST EU](https://cbradio.co.uk/wp-content/uploads/2020/03/Folder_Cobra_75ST_EU_ENG.pdf) **CRT CB RADIO** - [SS6900n](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_Superstar_6900_ENG.pdf) - [SS7900n](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_CRT_SS7900_ENG.pdf) - [SS9900n](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_CRT_SS9900_ENG.pdf) **DRAGON CB RADIO** - [Dragon (magnum) Deltaforce](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_Magnum_DeltaForce_ENG.pdf) **MIDLAND CB RADIO** - [Midland Alan 42 user manual](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_Midland-Alan_42_Nulti_2012.pdf.pdf)< - [Midland Alan 48 excel user manual](https://cbradio.co.uk/wp-content/uploads/2020/03/7200221190001.pdf) - [Midland 48 Plus user manual](https://cbradio.co.uk/wp-content/uploads/2020/03/7200226770001.pdf) - [Midland 78 plus](https://cbradio.co.uk/wp-content/uploads/2020/03/7200244780001.pdf) - [Albrecht ae 6690](https://cbradio.co.uk/wp-content/uploads/2020/03/7200234230001.pdf) - [Midland 8001e](https://cbradio.co.uk/wp-content/uploads/2020/03/7200234230001-1.pdf) **TEAM CB RADIO** - [Team TS-6M](https://cbradio.co.uk/wp-content/uploads/2020/03/ts-6m_manual_NEW_LCD_rev.pdf) - [Team MX-08](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_Team_MX-08_Mark4.pdf) - [Team RoadCom-FS](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_Team_RoadCom-FS_ENG.pdf) - [Team TS-9M](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_Team_TS-9M.pdf) **PRESIDENT CB RADIO** - [Barry AM/FM](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_President_Barry_AM-FM_V1.03.pdf) - [Teddy](https://president-electronics.com/download) - [Harry III](https://president-electronics.com/download) - [Truman](https://president-electronics.com/download) - [Jackson](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_President_Jackson_ASC_FR_EN_ES_DE.pdf) - [Jackson II](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_President_Jackson_II_FR_EN_ES_PL.pdf) - [Ronald](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_President_Ronald_10M-12M_ENG.pdf) - [Teddy](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_President_Teddy_ASC_FR_ENG_ESP_PL.pdf) **SUPERSTAR CB RADIO** - [3900n](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_CRT_Superstar_3900N_ENG_FR.pdf) - [3900 EFT](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_Superstar_3900EFT_ENG.pdf) - [120 FM](https://cbradio.co.uk/wp-content/uploads/2020/03/Superstar_120FM_Manual.pdf) - [SS 6900](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_Superstar_6900_ENG-1.pdf) - [SS Lord](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_Superstar_Lord_ENG.pdf) **TTi CB RADIO** - - [TCB-771](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_TTI_TCB-771_ENG.pdf) - [TCB-881](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_TTI_TCB-881_Multi.pdf) - [TCB-1100](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_TTI_TCB-880_ENG.pdf) - [TCB-900](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_TTI_TCB900_ENG.pdf) - [TCB-560](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_TTI_TCB-560_ENG.pdf) - [TCB-550](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_TTI_TCB-550_ENG.pdf) - [TCB-R2000](https://cbradio.co.uk/wp-content/uploads/2020/03/Manual_TTI_TCB_R2000_ENG.pdf) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cb-radio-manuals/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cb-radio-manuals/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cb-radio-manuals/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cb-radio-manuals/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Manuals&body=https%3A%2F%2Fcbradio.co.uk%2Fcb-radio-manuals%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cb-radio-manuals/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cb-radio-manuals/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cb-radio-manuals/?share=telegram) - --- ### [About Us](https://cbradio.co.uk/about-us-cb-radio-co-uk/) **Published:** January 20, 2020 **Author:** Jan **Content:** Welcome To UK 4×4, Norfolk CB Centre. In our shop you’ll find a range of CB radio’s, CB aerials and all related CB radio accessories for Homebase and on and off road use. Our web based shop passes on excellent savings to our customers by reducing unnecessary overheads. The owner has 40 years experience in CB radio, aerial installation and as radio amateurs (fully licensed City and Guilds) and marine radio operators we are true experts in two-way communication. And we do like our off-roading as well. Many of you know us from the many events we are attending throughout the year. Most of our items are in stock or we have them the next (working) day. But to be on the safe side ring or mail for availability On 07985-170973. Or send us your enquiry via the contact button above and we will do our best to help you. Orders will be delivered to you within three to five working days following receipt of payment, You can either use PayPal, or bacs or pay with your debit or credit card. Thank you for your visit, and we are looking forward to meeting you in person on one of the many 4X4 events we attend. ## PRICE INCREASES! We appreciate this will NOT be welcomed by anyone and whilst we continue to keep our prices down where possible you will no doubt be aware of the dramatic fall in currency exchange rates with the US Dollar and the Euro following Brexit. This means that currently all our imported parts are costing us around 15% – 17% more and that’s before Import Duty and VAT are added! Fortunately we purchased a lot of imported parts before the Brexit so can keep price increases under control in the short term but we would like to point out that any price increases do NOT mean that we are making more profit from our valued customers and we are confident that most of you will understand this situation is unavoidable. Many of our UK wholesalers have already notified their Trade customers of increases too. WITH THIS IN MIND PLEASE CHECK WITH US BEFORE ORDERING TO CONFIRM CURRENT PRICES ON OUR PRODUCTS. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/about-us-cb-radio-co-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/about-us-cb-radio-co-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/about-us-cb-radio-co-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/about-us-cb-radio-co-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20About%20Us&body=https%3A%2F%2Fcbradio.co.uk%2Fabout-us-cb-radio-co-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/about-us-cb-radio-co-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/about-us-cb-radio-co-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/about-us-cb-radio-co-uk/?share=telegram) - --- ### [Shipping & Returns](https://cbradio.co.uk/shipping-returns/) **Published:** January 20, 2020 **Author:** Jan **Content:** Next-day delivery is **a delivery service that allows you to have goods delivered the (working) day after they’re collected by the courier**, (weekends excluded). Next-day delivery is also referred to as 24-hour delivery and does not mean that if you buy outside of business hours it will be delivered within 24hrs. Our cut off time for next day delivery is 15:00 Monday to Thursday ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/shipping-returns/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/shipping-returns/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/shipping-returns/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/shipping-returns/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Shipping%20%26%20Returns&body=https%3A%2F%2Fcbradio.co.uk%2Fshipping-returns%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/shipping-returns/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/shipping-returns/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/shipping-returns/?share=telegram) - --- ### [Sample Page](https://cbradio.co.uk/sample-page/) **Published:** January 20, 2020 **Author:** Jan **Content:** This is an example page. It’s different from a blog post because it will stay in one place and will show up in your site navigation (in most themes). Most people start with an About page that introduces them to potential site visitors. It might say something like this: > Hi there! I’m a bike messenger by day, aspiring actor by night, and this is my website. I live in Los Angeles, have a great dog named Jack, and I like piña coladas. (And gettin’ caught in the rain.) …or something like this: > The XYZ Doohickey Company was founded in 1971, and has been providing quality doohickeys to the public ever since. Located in Leicester City, XYZ employs over 2,000 people and does all kinds of awesome things for the Leicester community. As a new WordPress user, you should go to [your dashboard](http://cbradioco.jarilostaging2.co.uk/wp-admin/) to delete this page and create new pages for your content. Have fun! ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/sample-page/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/sample-page/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/sample-page/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/sample-page/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sample%20Page&body=https%3A%2F%2Fcbradio.co.uk%2Fsample-page%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/sample-page/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/sample-page/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/sample-page/?share=telegram) - --- ### [Programming software](https://cbradio.co.uk/programming-software/) **Published:** January 10, 2023 **Author:** Jan **Content:** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/programming-software/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/programming-software/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/programming-software/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/programming-software/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Programming%20software&body=https%3A%2F%2Fcbradio.co.uk%2Fprogramming-software%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/programming-software/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/programming-software/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/programming-software/?share=telegram) - --- ### [Privacy Policy](https://cbradio.co.uk/privacy-policy/) **Published:** January 20, 2020 **Author:** Jan **Content:** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/privacy-policy/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/privacy-policy/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/privacy-policy/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/privacy-policy/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Privacy%20Policy&body=https%3A%2F%2Fcbradio.co.uk%2Fprivacy-policy%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/privacy-policy/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/privacy-policy/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/privacy-policy/?share=telegram) - --- ### [Mic Wiring](https://cbradio.co.uk/mic-wiring/) **Published:** March 12, 2020 **Author:** Jan **Content:** [Mic wiring diagrams to most common CB radios](http://www.okdxgroup.co.uk/mic.htm) **HOW TO WIRE ANY REGULAR OR POWER MIKE TO (ALMOST) ANY CB** This wiring discussion assumes that you have no schematic for the radio, or no information for the mike. There are three steps when wiring any new mike to your CB: 1\. Determine which pin on the radio’s mike socket performs which function (TX, RX, Audio, Ground) on the CB itself. 2\. Determine which color wire on the new or repaired mike performs that same function. 3\. Be able to neatly solder and insulate those wires on the corresponding pins of the new plug. Before you even start, you must know if the CB uses relay or electronic switching between TX and RX. The obvious way is to look at the main chassis for a relay. Or while listening to a signal, unplug the mike. If you can still hear something, it’s relay switched. If the speaker goes dead but the S/RF meter still shows a signal there, you have electronic or diode switching. If your CB only has a 3-pin mike socket (Pearce-Simpson, some Robyns, etc.) this is a dead giveaway that the CB is relay switched, because electronic switching requires at least four wires. Since diodes are cheaper than relays, nowadays almost all CBs use them. Some old 23-channel AM, all old 23 channel SSB, and the first generation 40 channel SSB (Cobra 138/139XLR, etc.) used relays. Today all rigs use electronic T/R switching to save on production costs. Relay switching is generally easier to wire up, because you only need three connections: Mike Audio, Ground, and the TX Keyline that energizes the relay when grounded. Electronic switching uses four wires: a common Ground, Mike Audio, TX Keyline that switches to TX when Grounded, and RX speaker line that opens the speaker on TX to prevent feedback squeal. These three or four connections are regardless of the number of pins on the CB socket. For example, if your CB has one of those female 5-pin or 6-pin DIN type sockets, only three or four of the pins are actually used. Manufacturers use the cheapest parts they can find. If they got a good deal on a million DIN sockets they’ll build the radios with them, instead of the superior 4- or 5-pin male socket with threaded coupling nut. To begin, figure out which pin on the mike socket does what. You’ll need a real antenna or a Dummy Load, a clip-lead or a piece of bare wire, and possibly an Ohmmeter. **Method #1 — With the use of an Ohmmeter** **WARNING:** Turn the radio off when using an Ohmmeter; you can blow the meter by accidentally applying voltage to it on a Resistance scale! 1\. Use the Rx1 resistance range. Attach one test lead to the BLACK power wire coming from the CB or slide mount, or the \[–\] pin on the DC socket of a base station radio. On a base station where the DC power socket isn’t stamped with \[+\] and \[–\] symbols, you’ll have to remove the cover. The inside of the DC socket will often use the standard RED \[+\] and BLACK \[–\] wires to the chassis to guide you. 2\. Leave one Ohmmeter lead on the BLACK or \[–\] wire or pin. Touch the other Ohmmeter test probe to all the mike socket pins. You’ll find one or two pins that make the meter deflects all the way over to 0**W**. That indicates a DC short (i.e., continuity) between the BLACK power lead and the socket pin you’re testing. In other words, this is the Ground. On a DIN type socket, the holes are too small to get the test probe into, so you’ll need to jam a bare wire into the socket holes as you proceed. Or probe from the inside of the socket if you can reach the connections on it. OK, you’ve already found the Ground or “common” connection. Immediately draw a sketch of the socket, using its notch as a reference point. Mark the common Ground lead you just found. Figure 1 shows the pin numbering for many of the most common CB mike sockets. **Note:** When probing with a VOM on the mike pins of an electronically switched radio, you may touch one pin that makes a small crackling noise in the CB speaker. And it shows a few ohms of resistance. This is an obvious indication for the RX line. Mark it on your sketch. You can also confirm this in Step #4 below. ![MikePlugs.jpg (67785 bytes)](https://i0.wp.com/www.cbcintl.com/images/MikePlugs.jpg?resize=699%2C1026) 3\) Remove your Ohmmeter and turn on the CB. Now attach a clip-lead or a piece of bare wire to the common pin you found in Step #2. Start touching the other end of the wire or clip-lead to the remaining pins briefly and watch what happens. 4\) In an electronically switched radio, you’ll see the following: touching one pin will operate the receiver speaker. Write it down. Another pin will key the transmitter, which you’ll know by: · the TX light glowing · the Dummy Load/Modulation Light glowing brightly · hearing a dead carrier on another CB tuned to the same channel. This is the TX line. Write it down. If you hear a squeal or buzzing sound, release the wires; you’ve either found the Audio (Mike) line, or shorted the Mike line to the speaker (RX) line. Assuming you found the common, the RX, and the TX in the steps above, the only thing left on the typical 4-pin socket must be the Audio or Mike line, so you’re done! On a 5- or 6-pin DIN socket, finding the Mike line will be slightly harder. You’ll have to first find the TX line, as described above. Listen on another CB tuned to the same channel while you touch the remaining socket pins with your fingers. Then key the CB you’re trying to wire; you’ll find that touching the Mike or audio line causes a slight hum to be heard on the dead carrier when listening on the other set. 5\) In a relay switched CB, jumpering the common with the correct pin will key the TX. You can then use the hum/fingers method above to find the Mike line. Some older relay switched rigs used a small shielded cable between the mike socket and main chassis, a dead giveaway that those are the Mike line and Ground. The newer generation (Cobra 148GTL, Uniden Grant, Galaxy, RCI, etc.) uses electronic switching exclusively (diodes are cheap!), and generally have 4-, 5-, or 6-pin mike sockets. Only 4 wires are needed but bigger sockets often mean that more than one pin may be grounded. In those models one ground is the common circuit ground and the other is the earth or cabinet ground. This helps to break up potential ground loops which can cause squealing or other stray oscillations. In any case, only four wires are actually needed. Some models include extra wires and pins for remote control functions such as CH. UP/CH.DOWN switching. **Method #2 — Without the use of an Ohmmeter** Without a VOM, you’ll have to use trial-and-error wire jumpering. For electronic switching this is exactly the same as described above but without the benefit of already knowing the common connection. Start by jumpering any two mike socket pins together and see what happens. Suppose they key the TX. Draw another sketch and mark both those pins. Continue jumpering around until you hear a normal receive signal in the speaker. Note those pin numbers. You’ll discover that one of those pins is common to both RX and TX. For example, if pins 2 and 3 cause TX, and pins 2 and 4 cause RX, then obviously pin #2 is common (ground) to both functions. Therefore, #3 is the TX line, and #4 is the RX line. This leaves only pin #1 remaining, which must be the Mike line. (By the way, this just happens to be the pin numbering for all Cobra radios.) The word “common” as we’re using it means the same thing as Ground or shield wire. Relay switched radios will be slightly more complicated, unless you have an older type that uses a 3-pin threaded mike socket. With the set turned on, attach a clip-lead to the BLACK or \[–\] power wire. (On old tube type sets, attach one end of the clip-lead to any part of the metal chassis.) Now start touching the loose end of the clip-lead to the mike socket pins until it keys the TX. Write it down. Then use the hum/fingers method above or look inside the radio to see if there’s a shielded audio cable. By the way when looking inside the radio, you can just as easily find the common or Ground by noting which pin the shield of that audio cable is attached to. On a 4-, 5-, or 6-pin socket that’s relay switched, those remaining pins are either unconnected, or possibly also grounded. If grounded it means that more than one combination will key the TX. Sometimes you need all four pins of the mike socket even though it’s a relay switched CB. (E.g., SBE Cortez.) In these rare cases, there will be voltage to ground on two pins instead of just one; touching either of those pins to common will make the lights go out or blow the fuse. In this case you need a separate set of mike switch contacts to wire it right, but most power mikes can be arranged this way. Now that you know which mike pin on the CB does what, you must match those pins to the corresponding colored wires on the new mike. Figure 2 lists the color/function of many common replacement mikes. If the mike brand you want to wire isn’t shown you’ll have to figure out the color code yourself, which is very easy to do using an Ohmmeter. (On a power mike, the battery must be installed before trying any Ohmmeter tests.) ![Brand wiring.jpg (112885 bytes)](https://i0.wp.com/www.cbcintl.com/images/Brand%20wiring.jpg?resize=721%2C963) The typical power mike will have three, four, or five colored wires and a shield braid. If one of the colored wires is obviously covered by the shielded braid, it’s the Mike or audio line. Otherwise if you cut back an additional inch or so from the main cord cover, you’ll most likely see one wire that’s wrapped with the shielded wire. Following are some typical examples. **Case #1: 3 Colors & Shield** Touch one lead of the Ohmmeter (Rx1 scale) to the shield braid and the other lead to each color in turn. One color should show a short; i.e., 0**W**, when not keyed and open continuity when it is keyed. This is the RX line. Write it down. Another color should show a short (0**W**, or continuity) with the mike keyed, and open with the mike button released. This is the TX line. The remaining color is obviously the Mike or audio line. If you couldn’t seem to find the TX or RX line this way, the mike is wired internally for relay switching. It will short two of the three colored wires on TX, rather than one color and the shield braid. See below. The mike or audio line can be found as follows: 1\. On a standard dynamic mike (not a power mike), the audio line will normally show a DC resistance of about 300**W**-1000**W** between the shield and Mike line when keyed, on the Rx10 or higher scale. (You may also see this in the unkeyed position.) This is definitely the mike audio line, as the TX and RX lines will show DC resistances of 0**W**. 2\. On a power mike with the battery installed, the resistance may vary anywhere from a few ohms to several thousand ohms, depending on the setting of its gain control. Many times when keying it you’ll see the Ohmmeter kick up, then slowly settle down to a set value as the capacitors in the mike amplifier charge up. **Note:** Many power mikes will show a mike line reading of a few ohms all the time until you key it. This indicates a normally closed audio line, a very undesirable feature. (A meter on the mike line will jump when you key it.) A normally closed audio line can be a real problem to wire to many CBs. It’s usually done because the manufacturer was too cheap to use a switch with enough contacts on it to begin with. Ideally the mike line should make a complete circuit only when you key it. All Turner mobile mikes work this way. If you found the mike line OK, but couldn’t get an indication of TX and RX continuity between the shield and one particular color, you have a mike that’s wired internally for relay switching. A quick Ohmmeter check after you find the mike line will reveal that you get a complete circuit (continuity) between the two remaining colored wires, rather than one color and the shield. On many mobile and most base power mikes, there’s a miniature slide switch inside the mike or the base plate marked “E” and “R.” Put it in the “E” for electronic position, and it will then show TX and RX continuity between shield and colored wires. We suggest you do this even if your CB uses relay switching. You can wire 99% of all CBs that use relay switching in the electronic position. But the reverse is not true; a mike internally wired for relay switching must be modified to use it on electronically switched CB radios. **Note:** Turner mobile mikes don’t have the internal switch, although some of their base mikes do. If the Turner mike starts with the letter J, like JM+2, JM+3, etc., you’re all set up for electronic switching. Nowadays Turners all come with 5-wire cables since relay CBs are a thing of the past, and with them the old 3-wire mike cables. Generally speaking, it’s much better to buy a mike wired for electronic switching. It can be easily rewired to use on another CB later just by stripping either of the switching wires and twisting it together with the shield as a single wire. The remaining color then becomes the TX line for relay switched radios. You’ve reduced the four wires down to three and saved the hassle of having to open up the mike and rewire the switch itself. **Case #2: 4 or 5 Colors & Shield** Here’s a case where the manufacturer gave you enough wires to make all the necessary switching functions. Usually one or two of these wires will end up being unused and can be cut off when you solder on the plug. Let’s say the mike has the following wires in the cord: 1\. Red 2\. Yellow 3\. Blue 4\. Green 5\. Shield braid. Step #1: Identify the Mike or audio line. This will have the shield wrapped around it. If it doesn’t, cut back another inch or so of covering; you’ll find it. If not, use the previously described Ohmmeter method. You’re looking for the wire that shows a kick (power mike) or a fixed resistance reading (standard mike) between it and the shield when keyed. Step #2: It’s very unlikely you’ll find any continuity between shield and the remaining non-audio colored wires. Use your Ohmmeter to touch the remaining three colors with both test probes. You should discover that two of the three colors will short (show continuity) when keyed, and two of the three will short unkeyed. One of those three colors is common to the other two colors, in exactly the same way we found the common on the mike socket itself. Step #3: Strip back that common color and twist it together with the shield, making this a single wire. Then solder them together. You’ll now have one color left for RX, and one color for TX, when tested for continuity with the shield. You’ve reduced those five wires down to the four you need for electronic switching, or the three you need for relay switching. (In this case, also cut off the unnecessary fourth RX wire.) To repeat as a practical example: assume from the above you discovered that YELLOW is the Mike line, leaving RED, BLUE, GREEN, and SHIELD. You then discover that RED and BLUE short when keyed, while GREEN and BLUE open up continuity when keyed. Therefore, BLUE is common to both RED and GREEN. You’d then strip and twist the BLUE to the SHIELD as one wire, leaving you with RED as TX, and GREEN as RX. (With relay switching, you could also cut off the GREEN wire.) **Note:** As previously mentioned, many regular and power mikes come with a normally closed or shorted mike line. This can make it difficult or even impossible to wire to certain CB radios. This problem shows up as a loud buzz, squeal, or the receiver going dead when you plug the mike in. It’s because there aren’t enough switch contacts to perform all the necessary functions, which include: · connect RX or TX at the proper time. · connect the audio line, ideally only when keyed. · connect the power mike battery only on TX, so battery won’t drain except when being used. In many cases, installation of a resistor of about 4.7K**W** or more in series with the mike line will cure this problem. This would be installed exactly the same way as the RF feedback squeal filter described below. You may have to experiment to find the proper value resistor. You’ll probably notice a slight decrease in receiver volume if it becomes necessary to resort to this method. Use the smallest value resistor that will prevent the RX from going dead or squealing. The mike should then work normally, and you probably won’t even notice the volume decrease. If you experience this problem when trying to wire certain brands of mikes, it’s possible the mike just can’t be wired to that particular CB. For example, the Astatic D-104 “lollipop” mike with the TUG-8 base stand uses a double pole, double throw T/R switch. If you had this wiring problem with such a mike, you couldn’t wire the CB to it. Instead you’d have to buy the TUG-9 stand, which uses a triple-pole, double-throw T/R switch. (And is also more expensive.) This problem is very rare though, and happens in maybe 5% of all mike wiring/CB combinations. **THE RF FEEDBACK “SQUEAL” PROBLEM** **Note:**Don’t confuse this with the “Talkback” feature of many newer CBs. Those models are specifically designed to let you hear yourself in the speaker so you can adjust an Echo or some other audio feature in the radio. Feedback squeal is a very common problem. If the mike is correctly wired and there are no broken wires in the plug or cord, the squeal is usually being caused by RF feedback. Fancy name, easy solution. Often the stock mike works fine, and the squeal only starts when you try to wire up a power mike. There’s nothing wrong with the mike. RF feedback means that some of your TX energy is getting back into the audio or modulation circuit of the CB. It starts a continuous cycle of oscillation or feedback, just like a PA system with the mike too close to the speaker. The most common causes are poor RF filtering in the CB, or high antenna SWR. The cure is cheap and simple. **How To Cure The Squeal** Refer to Figure 3. 1\. Open the mike and figure out which colored wire is the actual audio or Mike line. (See the previous discussion to determine this.) 2\. After finding the audio line, cut it at a convenient spot and insert a 4700**W** (4.7K**W**, YELLOW-VIOLET-RED), 1/2-watt or 1/4-watt resistor in series with the audio line. See the inset in Figure 3. 3\. For extra filtering protection, also connect a .001µF or .01µF ceramic disc capacitor from either side of your resistor/audio line connections to the bare twisted shield (Ground) braid of the mike cable. ![Squealfix.jpg (41852 bytes)](https://i0.wp.com/www.cbcintl.com/images/Squealfix.jpg?resize=658%2C913) The value of these parts isn’t very critical; just get the physically smallest ones you can find, like a 1/2-watt or 1/4-watt resistor and a 50-Volt capacitor. These will easily fit inside the mike. Solder and tape all your connections. (Please, no Scotch Tape!) These parts together cost about 50p, and will prevent RF energy in the TX circuits from getting back into the mike. This works 99% of the time. If adding the resistor only partially solves the feedback problem, you can try using a small RF choke instead. Values of about 470µH-1000µH work well and won’t affect the audio quality. Get the miniature epoxy type of RF chokes, which actually look like a 1-Watt resistor and even have a 4-band color code on them. If filtering the mike doesn’t fix the problem, also check your antenna by substituting a Dummy Load. If the squeal disappears, it was caused by high SWR, which causes excess RF energy to flow back into the radio. The cure is obvious: tune or fix that antenna! ## ***BASIC MIC WIRING*** --- [ASTATIC WIRING AND TIPS](http://www.klimaco.com/ELECTRONICS_HF/astatic_wiring.htm) --- In order to wire mics you need a basic understanding of how they work. The books tell you the color codes for many mics and which pins to solder them to on the connector for a given radio. But what if the mic is on it’s third cord, who knows what color code the last owner used, and what if your brand of mic isn’t listed. **THERE IS NO STANDARD COLOR CODE.** Astatic, Cobra, Turner, and Generic mics all have different color designations for each wire. For example, the red wire on an Astatic mic is the Transmit wire, on Turner mics it’s the common, and Cobra uses it for the audio lead. The purpose of this tutorial is to give you the means to figure out which function each wire is serving when you don’t know the color code. All you will need is an Ohm Meter or continuity checker, if you don’t have either of these you should be able to open the mic and see where each wire is connected to the switch. This tutorial applies to the vast majority of 40 Channel CB radios made in the last 20 years, with electronic switching. There may be rare exceptions and this does not apply to most of the old ‘relay switching’ rigs. ![basicmic.gif (7412 bytes)](https://i0.wp.com/www.klimaco.com/CBPIX/basicmic.gif?resize=460%2C261) **RECEIVE MODE** Audio circuit is open receive and common wires are closed Displayed is the common five wire microphone. This mic is shown with the PTT (push to talk) button released, and the radio in receive mode. RECEIVE MODE: Audio circuit is open, receive and common leads are closed (connected together through the switch) TRANSMIT MODE: Audio circuit is closed, transmit and common leads are closed, (receive and common are open) **Finding the audio lead:** > The audio wire is always wrapped in the shield (bare wire), COOL, we’ve already figured out 2 of the wires. **Finding the Transmit lead:** > With your ohm meter check the 3 remaining wires, check 2 wires at a time until you get continuity. The remaining wire you aren’t testing is your transmit lead. **Finding the Common and Receive:** > Now you must key the mic, press the PTT button in and hold it, a rubber band works, or have someone hold it for you. Check for continuity between the Transmit wire and the two unidentified wires one at a time, whichever wire reads continuity with the TX wire is the Common lead, the other wire is Receive! ***TROUBLE SHOOTING*** > **But my mic has 6 wires!** It most all cases the 6th wire is not used, cut it off short enough so it won’t short out against any of the pins on the mic connector. > > **Hey my mic only has 4 wires!** The shield wire is used as the common. > > **My mic does have 5 wires, but my connector only has 4 pins!!** In this case solder the common and shield wires to the same pin on the mic connector. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/mic-wiring/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/mic-wiring/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/mic-wiring/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/mic-wiring/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mic%20Wiring&body=https%3A%2F%2Fcbradio.co.uk%2Fmic-wiring%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/mic-wiring/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/mic-wiring/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/mic-wiring/?share=telegram) - --- ### [History of CB Radio](https://cbradio.co.uk/history-of-cb-radio-co-uk/) **Published:** January 20, 2020 **Author:** Jan **Content:** # The CB Radio Craze (1970’s) [![CB Radio](https://i1.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/CBRadio_thumb.png?resize=240%2C155 "CB Radio")](https://i1.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/CBRadio.png)The CB radio was invented in 1945 by Al Gross, the inventor of the walkie-talkie and owner of the Citizens Radio Corporation. The radio became popular with small businesses and blue collar workers like carpenters, plumbers, and electricians who used the radio as a tool to communicate with coworkers. By 1960, the costs to produce the 23 channel radio were low enough that everyday Joes could afford to buy one. By 1973, coinciding with the onset of the oil crisis, the CB Radio craze erupted. # FCC opens up CB radio channels to the public [![Al Gross - Inventor of CB Radio](https://i0.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/AlGross_thumb.png?resize=184%2C240 "Al Gross - Inventor of CB Radio")](https://i0.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/AlGross.png)When Al Gross invented the CB radio in 1945, the Federal Communications Commission (FCC) quickly opened up radio services for personal users of the radio. Most countries have similar radio services. In the United States, Citizen’s Band Radios operate on the 27-Mhz band whereas in Canada it is known as General Radio Services and operates on the 26 Mhz and 28 Mhz bands. Unlike amateur radio, CB radio does not require a license (although at one time, they did require a license to operate). CB radio channels are shared by many users at the same time and other stations must listen and wait for the shared channel to be available. By the 1960’s, the CB radio was popular with businesses and radio hobbyists. By the late 1960’s, advancements in solid state electronics allowed the size of the radio to be greatly reduced as well as the cost. Suddenly, the general public had access to a communications medium that previously had only been available to specialists. CB radio clubs were formed and hobbyists developed their own unique CB slang language along with 10-codes similar to the codes used by emergency services. # The CB Radio Craze [![Trucker and his CB Radio](https://i0.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/TruckerOnCBRadio_thumb.png?resize=240%2C187 "Trucker and his CB radio")](https://i2.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/TruckerOnCBRadio.png)By 1973, the oil crisis caused the cost of gasoline to skyrocket and shortages quickly developed. In response, the United States government issued a 55 MPH nationwide speed limit. Drivers quickly learned that CB radios could be used to communicate with other drivers to inform them of gas stations that had gas and to notify speeders where police (smokeys) had speed traps set up. The CB radio became so popular, by 1977 additional channels were opened up and 40 channel radios were introduced to the market. [![Smokey and the Bandit poster](https://i2.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/SmokeyAndTheBandit_thumb.png?resize=170%2C240 "Smokey and the Bandit Move Poster")](https://i1.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/SmokeyAndTheBandit.png)Newsworthy events related to CB radios further added to the excitement. Truck drivers used the radios to organize convoys ( huge lines of trucks that travelled down the nation’s highways). In several instances, blockades were organized using CB Radios where trucks would fill all available highway lanes in protest of the high gas prices and new trucking regulations. CB Radios began to play prominent roles in movies such as *Smokey and the Bandit* and *Movin’ On*. Novelty songs about the new electronic toy, such as CW McCall’s *Convoy* and Cletus Maggard’s *White Knight* (see lyrics below), were played regularly on the radio. During the CB radio craze, citizens of Great Britain began illegally using American made CBs. The British government told its citizens that the CB radio would never be legalized on the 27 Mhz wavelength and instead, proposed a different technology on the 860 Mhz “open channel” instead. The citizens of the United Kingdom took to the streets in high profile public demonstrations and UK government officials bent to the will of the people. Al Gross made the first British ceremonial CB radio call from Trafalgar Square in London. Later the United Kingdom added more than 40 channels giving UK citizens 80 CB radio channels to work with. # Handles [![Citizens Band](https://i1.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/CitizensBand_thumb.png?resize=216%2C240 "Citizens Band")](https://i2.wp.com/www.mortaljourney.com/main/wp-content/uploads/2010/11/CitizensBand.png)Years prior, CB radios required a licensed to operate. The license cost about $20 in the early 1970’s and was reduced to $4 in the late 1970’s. In addition, there were many rules and regulations concerning antenna height, distance restrictions, allowable transmitter power, and call sign rules. People ignored the laws and to hide their identity, developed “handles” or fake names to identify themselves on the radio. After the FCC started receiving over 1,000,000 license applications a month, the license requirement was dropped entirely but as the culture had already developed, people continued using handles such as “Big Mama” or “Timberwolf” to identify themselves while on the air. Some famous celebrity handles include: Betty Ford, a former First Lady of the United States, whose CB handle was “First Mama”. Voice actor Mel Blanc , an active CB Radio operator, often used the CB handles Bugs or Daffy and talked over the air in the Los Angeles area using his many voices. Advertisements # Channels Channels evolved to fill specific purposes. For instance, channel 9 was kept open for emergency use and channel 19 was used for highway communication west of the Mississippi River. Eventually channel 19 became the “trucker’s channel” and was used for highway communication all over the United States. In the early days of the CB radio craze, channel 11 was used solely for the purpose of initiating communications (after which the two radio callers switched to a mutually agreed upon channel). Towns that were close together often adopted a specific channel as their “home” channel so that they could communicate with each other. ###### **FCC REGULATED CB RADIO CHANNELS (UK FREQUENCIES DIFFER)** - 1 26.965 MHz - 2 26.975 MHz - 3 26.985 MHz - 4 27.005 MHz - 5 27.015 MHz - 6 27.025 MHz - 7 27.035 MHz - 8 27.055 MHz - 9 27.065 MHz - 10 27.075 MHz - 11 27.085 MHz - 12 27.105 MHz - 13 27.115 MHz - 14 27.125 MHz - 15 27.135 MHz - 16 27.155 MHz - 17 27.165 MHz - 18 27.175 MHz - 19 27.185 MHz - 20 27.205 MHz - 21 27.215 MHz - 22 27.225 MHz - 23 27.255 MHz - 24 27.235 MHz - 25 27.245 MHz - 26 27.265 MHz - 27 27.275 MHz - 28 27.285 MHz - 29 27.295 MHz - 30 27.305 MHz - 31 27.315 MHz - 32 27.325 MHz - 34 27.345 MHz - 35 27.355 MHz - 36 27.365 MHz - 37 27.375 MHz - 38 27.385 MHz - 39 27.395 MHz - 40 27.405 MHz # Talking the Talk CD etiquette developed and evolved during the craze. CB radios were intended to be used to warn other drivers of Smokeys up the road or to report roadside emergencies. Chit chatting with other CB radio users is ok but it is not considered courteous to hold up a channel for more than a few minutes. Cursing is also frowned upon It is common for CB radio operators to use hidden code or unique slang to communicate. For instance, when giving a warning that a police officer is running a hidden speedtrap, they might say “smokey in the bush” or to warn truckers to watch out for a broken down school bus they might say “watch out for the kiddy car at mile marker 200″. Many of the CB slang from the 1970’s hung around and became slang that continued to be used outside the realm of CB radio communications. Below is a large list of CB radio slang used during the 1970’s CB radio craze. ###### **CB RADIO SLANG FROM A TO Z** - ACE – an important or well known CB radio operator - Apple – a person who is addicted to the CB radio - AF -Audio Frequency - Afterburner – Linear amplifier - ALERT – Affiliated League of Emergency Radio Teams - All the good numbers – good luck and best wishes to all - Alligator – shredded tread from the tires of an 18 wheeler truck - Amigo – friend or good buddy - ANL – Automatic noise limiter - Ankle biter- a little kid - Antenna Farm- a CB radio ase station with many antennas strung up in the air - Antler Alley – an area known for deer crossings - Appliance Operator – degrading term for a non-technical person who barely knows how to turn on their radio - AM -Amplitude Modulation - Ancient Mariner – someone who uses AM radio - Baby Bear – a rookie police officer - Backdoor – vehicle behind the one who is ahead of it. - Backdoor closed – the rear of a convey with trucks stacked across the lanes to keep the Smokeys out - Back em up – slow down or reduce speed - Back off the hammer – slow down or reduce speed - Backslide – return trip from a trucker’s run - Bad scene – a crowded CB radio channel - Ballet Dancer – a CB radio antenna that sways and bends in the wind - Base Station – a CB radio installed at a fixed location such as a house - Beast -a very good CB radio rig - Beam – Directional Antenna - Bean House Bull – trucker conversation carried on at a truck stop - Bear Bait – a speeding car - Bear Cage- police station or jail cell - Bear Cave – police station - Bearmobile – police car - Bear Trap – stationary police car running a radar trap - Bear in the air- police in their helicopter - Bear – police officer - Beat the bushes – driving ahead of the other truckers in an effort to draw the police out of hiding - Beaver – good looking female - Beaver Bear – female police officer - Beaver Fever – missing the wife or girlfriend - Beaver Palace – a club or bar known for loose female patrons - Beaver Patrol – looking for a good looking woman to spend time with - Big Charlie or Big Daddy – the Federal Communications Commission (FCC) - Big Mack – Mack truck - Big Slab – freeway or highway - Big 10-4- hearty agreement. - Bit on the seat of the britches – pulled over and issued a speeding ticket - Black and White – police car - Black Ice – patch of iced over blacktop road - Bleeding/Bleedover – strong signals from a base station on another channel that interferes with another channel’s reception - Blew my doors off – car passed by at high speed - Blue Slip- speeding ticket - Boast Toastie – CB expert - Boat Anchor – an old, broken radio that can no longer be repaired - Bodacious- Awesome - Boy Scouts – State Police - Box -Tractor Trailer - Break (or breaker, break for) – request to use the channel - Breaking Up – CB radio reception is poor - Breaking the “˜ol needle – very strong CB radio signal - Bring it back – answer the question that was posed - Brown paper bag – unmarked Police car - Bubble gum machine- police car with flashing lights - Bucket Mouth – obnoxious radio operator or someone who cusses a lot on the air - Bug Out – signing off or leaving the radio channel - Bumper Lane – the left most passing lane - Button Pusher – another CB radio operator who is trying to breakup your communication with another station by keying the microphone - Camera -police radar - Candy Man – Federal Communications Commission (FCC) - Casa – house - Cash Register – toll booth - Catch you on the flip-flop – will talk to you on my return trip - Channel 25 – the telephone - Charlie – Federal Communications Commission (FCC) - Chew and choke – Restaurant or truck stop eatery - Checking My Eyelinds For Pin Holes – I am tired or sleepy - Check the seatcovers – look at that passengers in the passing car - Chicken Coup – weigh station - Chicken Coup is Clean – weigh station is closed. - Chicken Inspector – weigh station inspector - Chopped Top- a very short antenna - Christmas Card – speeding ticket - Chrome Dome – a mobile radio with a dome antenna on top of the car - Clean Cat – a unmodified CB radio - Clean Shot – the road ahead is free of obstructions, construction, and police - Cleaner channel – CB radio channel with less traffic on it - Clear – Final transmission “This is 505 and I’m clear” - Clear after you – you are ending transmission after the other person finishes signing off - Coffee Bean – Waiter or waitress - Cold Rig – 18-wheeler pulling a refrigerated trailer - Collect Call – call for a specific CB radio operator - Colorado Kool Aid – beer - Come again – repeat your last transmission - Come Back – answer my call - Comic Book -truckers log book - Coming in Loud ‘n Proud – loud and clear signal - Concrete Blonde – prostitute - Convoy – 2 or more vehicles traveling the same route in a row - Cooking – driving - Cooking Good – reached desired speed. - Copy – receiving a message - Copying the mail – listening to the communications on the channel - County Mountie – county police or sheriff - Covered Up – transmission was blocked by interference - Crack ’em Up – traffic accident - Cradle Baby – radio operator who is afraid to ask someone to stand by - Cup of Mud – cup of coffee - Cut Out – leaving the channel - Cut Some Z’s – get some sleep - Cut The Coax – turn off the radio - Daddy-O – Federal Communications Commission (FCC) - Dead Pedal – slow moving car or truck - Dead Key – keying the mike without talking - Decoy – empty or unmanned police car - Diesel Digit – cchannel 19 - Diesel Juice – truck fuel - Dime Channel – channel 10 - Dirty Side – Eastern Seaboard - Dixie Cup- female operator with southern accent - Doing the Five-Five- traveling at 55mph - Doin’ it to it – Full speed - Doing our thing in the left-hand lane – full speed in the passing or left-hand lane - Do it to me – answer back - Do you copy? – Do you understand? - Don’t Tense – calm down - Don’t Feed The Bears – don’t get a ticket - Double key – two radio operators talking at the same time - Double L – telephone call - Double Nickel – 55mph (the speed limit during the 1970’s CB radio craze) - Down “˜n Out or Down and gone – signing off - Down and on the side – through talking but will continue listening - Drag Your Feet – wait a few seconds before transmitting to see if someone else wants to break in - Dream Weaver – sleepy driver who is weaving across the lanes - Dress For Sale – prostitute or dressed like a prostitute - Drop Out – fading signal - Drop Stop Destination – where freight will be dropped off - Drop the Hammer – drive fast - Dropped it off the shoulder – ran off the shoulder of the road - Dusted your britches – keyed up at the same time - Dusted my britches – passed me very fast - Dusted Your Ears- transmission interrupted - DX – Long Distance - Eager beaver – anxious young woman - Ears ON – CB radio turned ON - Eights or Eighty-eights – love and kisses - Eights and other good numbers – love and kisses, and best wishes - Eighty-eight’s around the house – good luck and best wishes to you and yours - Eyeball- Personal meeting - Everybody must be walking the dog – all channels are busy - Evil Knievel – motorcycle policeman - Fake brake – driver riding with his foot on the brake - Fat load – overweight or big truck load - Feed The Bears – paying a speeding fine - Fender bender – traffic accident - Fifty Dollar Lane – passing lane - First Sargent – wife - Flag waver – highway repair crew - Flaps down – slow down - Flappers -ears - Flip flop – return trip - Flip-Flopping Bears – police reversing direction or turning around - Flop it – turn around - Flop box – motel or room in truck stop - FM – Frequency Modulation - Follow the stripes home – have a safe trip - Footwarmer – Linear amplifier - Forty weight – coffee - Four Wheeler – cCar - Four lane parking lot – highway with traffic backed up - Four legged go-go dancers – ugly women - Fox – pretty female - Fox Charile Charlie – FCC - Fox hunt – FCC hunting for illegal operators - Fox jaws – Ffemale with nice voice, but not necessarily a body to match - Free Ride – prostitute - Freight Box – trailer for the truck - Friendly Candy Company – FCC - Front Door – the lead in a convoy - Full of vitamins – running all out - Full Bore – driving fast as you can - Full Throttle – driving fast as the truck will let you - Funny Candy Company – FCC - Funny channels – channels that are outside the legal band - Gallon – 1000 watts of power - Garbage – too much small talk on a channel - Gas Jockey – gas station attendant - Gear – overnight bag or supplies - Get horizontal – go to sleep - Get Trucking – start driving - Girlie Bear – female police officer - Give me a shout – call me on the radio - Glory Card – Class D License - Go Breaker – OK to go ahead and break into the channel - Go Ahead – your turn to talk or reply - Go Juice – truck fuel - Go to channel 41 – a joke to get someone off the radio (there is no channel 41) - Going Horizontal – going to sleep - Gone – leaving the channel - Gone 10-7 – permanently dead - Good Buddy – friend (modern day means homosexual) - Goon Squad – persons who do not share the channel - Got my shoes on – Switched the linear ON - Got your ears on? – are you listening on this channel - Got my eyeballs peeled – looking hard - Got my foot in it – speeding up - Go to 100 – go to the bathroom - Green Stamps – cash money - Green Stamp Collector – police with radar - Green Stamp lane – passing lane - Green Stamp Road – toll road. - Grease monkey – mechanic - Greasy Spoon – restaurant with bad food - Ground Clouds – fFog - Gypsy – trucker who drives for an independent company - Hack – taxi cab - Hag Feast – group of female CB radio operators on the channel - Haircut palace – bridge or overpass with low clearance - Hairpin – sharp curve - Hamburger helper – Linear Amp - Hammer – gas pedal - Hammer Off – slow down - Hammer Down – speed up - Hang it in your ear – that was a stupid comment - Handle – CB radio code name - Hay Shaker – truck transporting a mobile home - Heading for a hole – about to head into a low spot where radio transmission may not be possible - Heater – Linear amplifier - Hell bent for leather – driving fast - Hiding in the grass – police parked on a median strip - Hiding in the bushes, sitting under the leaves – hidden police car - Highball – drive non-stop to the destination - High Rise – large bridge or overpass - Hippie Chippie – female hitchhiker - Hip Pocket – glove box - Hit the cobblestones – hit the road - Hog – Harley Davidson - Home Twenty – location of your home - How tall are you? – How tall is your truck? - Hundred mile coffee – very strong coffee - Ice Box – Refrigerated trailer. - Idiot Box – TV set - In a short – soon - In a short-short – very soon - In the mud – noise on the channel - In the Pokey with Smokey – arrested - Jack – good friend - Jack Rabbit – police officers - Jam – deliberately interfere with another station. - Japanese toy – CB - Jargon – CB lingo - Jaw Jacking – talking, talking needlessly - Jewelry – lights on a rig - Jingle – call on the telephone - Johnny Law – police officer - Juke Joint – small or out-of-the-way place to eat - Jump Down – switch to a lower channel - Jump Up – switch to a higher channel - Keep “˜em Between the Ditches – have a safe trip - Keep the shiny side up and the greasy side down – drive safely - Keep the wheels spinning – drive safely - Keep your noise between the ditches and smokey out of your britches – drive carefully, lookout for police - Keying the mike – activating the microphone without speaking - Kicker – Linear amplifier - Kiddie car – school bus - Knock the stack out – speed up - Knuckle Buster – fight - Kojak – police officer - Kojak with a Kodak – policeman with a radar - Lady Bear – female police officer - Lady Breaker – Ffemale CB operator asking for a break. - Lame – broken down vehicle - Land Line – telephone - Land Yacht – mobile home or camper - Lane Flipper – car or truck that keeps changing lanes - Lane Lover – driver who will not get out of the lane - Latrine Lips – radio operator who cusses - Let the channel roll – it’s ok to break in and request use of the channel - Legal Beagle – person who always follows the rules - Lettuce – money - Lights green, bring on the machine – road is clear of police and other slowdowns - Linear – RF amplifier - Little Bear – local police officer - Little Beaver – daughter - Little Bit – prostitute - Little Brother – friend - Local Bear – local police officer - Local Yokel – small town police officer - Log some Z’s – get some sleep - Loot Limo – armored car - M20 – place to meet - Magic Mile – the end of a trip - Mama – girlfriend or wife - Mama Bear – female police officer - Man in White – doctor - Mashing the mike – keying the mike (usually without talking) - Meatwagon – ambulance. - Modulate – talk - Modulating – talking - Money Bus – armored truck - Motion Lotion – fuel - Motorcycle Mama – woman riding on a motorcycle - Muck Truck – cement truck - Nap Trap – hotel or other place to sleep - Negative – no - Negative Copy – did not hear - Neon, Freon, Ion Jockey – truck driver with many lights on his rig - Nightcrawlers – many police in the area - Niner – channel 9 - Ninety Weight – alcohol - Oil burner – diesel truck - On the by or on the standby – listening but not talking. - One foot on the floor, one hanging out the door, and she just won’t do no more – driving as fast as I can - Other Half – girlfriend or wife - Out – through transmitting - Over – your turn to transmit - Over modulation – talking so loud that audio is distorted - Pack it in – ending transmission - Pair of sevens – no contact or answer - Papa Bear – state trooper with CB radio - Paper hanger – police giving ticket - Parking Lot – traffic jam - Pavement Princess – prostitute - Peanut butter in his ears – is not listening - Pedal to the metal – drive fast - Peeling Off – getting of the freeway - Plain Wrapper – unmarked police car - Play Dead – stand by - Picture taking machine – radar - Pit Stop – stop for a bathroom break - Popcorn – hal - Porcupine – cr with a lot of antennas on it - Pounding the pavement – waking - Press some sheets – slep - Pull the hammer back – slow down - Pull the plug – signoff and turn the radio off - Put an eyeball on him – saw or see - Put it on the floor and looking for some more – trying to drive as fast as possible - QSL Card – Personalized postcard sent to confirm a conversation - QSK – break - QRM – nise or interference - Q-R-Mary – nose or interference - QSY – changing channels/frequency. - QRT – signing off - QRX – wait - QSB – nise - QSO – conversation - QTH – location - Quasar – female - Radio Runt – child breaking in on a channel. - Rain Locker – shower - Rake the leaves – last vehicle in a convoy - Ratchet-Jaw – non-stop talker - REACT – Radio Emergency Associated Citizens Teams - Rebound – return trip - Red Lighted – pulled over by police - REST – Radio Emergency Safety Teams - RF – Radio Frequency - Road Jockey – truck driver - Road Ranger – police officer - Rock – slang for crystal - Rockin’ chair – car in the middle of a convoy - Roger – O.K. - Roller Skate – car - Rolling – driving - Rolling Bears – police officers driving - Rugrats – children - Rubberneckers – onlookers - Running Barefoot – using a radio at the legal output - Running on rags – driving a vehicle with little to no tread on the tires. - Running Shotgun – driving partner - San Quentin Jailbait – under age female hitch hiker - Seatcover – good looking female - Shaking the windows – loud and clear reception - Shim – illegally amplified transmitter - Shoot the breeze – casual conversation - Shovelling coal – speeding up - Show-off lane – passing lane - Skip – atmospheric conditions that cause signals to travel much farther than they normally would - Skippers – radio operators talking long distance - Sidedoor – oassing lane - Sitting in the saddle – middle truck in a convoy - “S” Meter – meter on your radio which which indicates the signal strength - Smokey – State Police - Smokey Bear – State Police - Smokey report – police location report - Smokey Dozing – police sitting in a parked car - Smokey’s thick – police are everywhere - Smokey with a camera – police with radar - Smokey with ears – policeman with CB radio in their car - Somebody stepped on you – someone transmitted while you were talking - Splatter – bleedover from another channel - Squelch – control on radio which silences the speaker until a signal of a certain strength breaks through it - Three’s and eights – signing off, best wishes - Thin – very weak signal - Twelves – I have company present - Twenty – Location - Two Stool beaver – very fat woman - Uncle Charlie – FCC - Walking on you – someone talking over you - Wall-to-wall and treetop tall – strong, clear signal - Wall-to-wall and ten feet tall – strong clear signal - Warden – girlfriend or wife - Watch the pavement – drive safely - Water hole – truck stop - Wear your bumper out – following too close - Wearing socks – has linear amplifier - What am I putting on you? – how strong is my signal - What’s your twenty? – what is your location - Whip – long cb antenna - Who do you pull for? – who do you work for? - Wooly Bear – female - Z’s – Sleep In addition to CB radio slang, CB radio operators used a series of “10 codes” similar to the codes used by emergency radio operators. ###### THE COMPLETE CB 10 CODES - 10-1 Receiving Poorly - 10-2 Receiving Well - 10-3 Stop Transmitting - 10-4 Ok, Message Received - 10-5 Relay Message - 10-6 Busy, Stand By - 10-7 Out of Service, Leaving Air - 10-8 In Service, subject to call - 10-9 Repeat Message - 10-10 Transmission Completed, Standing By - 10-11 Talking too Rapidly - 10-12 Visitors Present - 10-13 Advise weather/road conditions - 10-16 Make Pickup at… - 10-17 Urgent Business - 10-18 Anything for us? - 10-19 Nothing for you, return to base - 10-20 My Location is ……… or What’s your Location? - 10-21 Call by Telephone - 10-22 Report in Person too …… - 10-23 Stand by - 10-24 Completed last assignment - 10-25 Can you Contact ……. - 10-26 Disregard Last Information/Cancel Last Message/Ignore - 10-27 I am moving to Channel …… - 10-28 Identify your station - 10-29 Time is up for contact - 10-30 Does not conform to FCC Rules - 10-32 I will give you a radio check - 10-33 Emergency Traffic at this station - 10-34 Trouble at this station, help needed - 10-35 Confidential Information - 10-36 Correct Time is ……… - 10-38 Ambulance needed at ……… - 10-39 Your message delivered - 10-41 Please tune to channel …….. - 10-42 Traffic Accident at ………. - 10-43 Traffic tie-up at ……… - 10-44 I have a message for you - 10-45 All units within range please report - 10-50 Break Channel - 10-62 Unable to copy, use phone - 10-62sl unable to copy on AM, use Sideband – Lower (not an official code) - 10-62su unable to copy on AM, use Sideband – Upper (not an official code) - 10-65 Awaiting your next message/assignment - 10-67 All units comply - 10-70 Fire at ……. - 10-73 Speed Trap at ………… - 10-75 You are causing interference - 10-77 Negative Contact - 10-84 My telephone number is ……… - 10-85 My address is ……….. - 10-91 Talk closer to the mike - 10-92 Your transmitter is out of adjustment - 10-93 Check my frequency on this channel - 10-94 Please give me a long count - 10-95 Transmit dead carrier for 5 sec. - 10-99 Mission completed, all units secure - 10-100 Need to take a break - 10-200 Police needed at ………. # How to operate a CB radio There it an etiquette that CB radio operators follow in order to be “polite” and courteous to the other CB radio users. The following rules should always be followed. - When two or more people are talking on a channel they are said to “own the channel”. FCC regulations require they give other users an opportunity to use the channel so they should not hold the channel hostage for more than several minutes. - CB radio users should not “step on” other units. “Step on” means to transmit at the same time another radio operator is transmitting. They should also never key over someone else. - If you hear one unit break for another unit, give some time for the unit to respond before you say anything yourself. It may take a radio user time to grab the mic or get from the kitchen to the living room radio unit. - After your break has been acknowledged, keep the next transmission short. For example, a break might go something like this: “Break one-nine for Super Trooper. Super Trooper, do you have your ears on?”. if Super Trooper does not answer after a minute or so, it is nice to acknowledge that you are finished by saying something like “thanks for the break”. - If you are carrying on a conversation and someone “walks over” you, you have one of two options. You can ask the person you were speaking to to repeat. For example, “10-9, you were stepped on. Please repeat”. Alternatively, you can hand the channel over to the breaker. - If your break is not acknowledged, wait several minutes before attempting to contact them again. A historic moment: Ofcom, the UK government-approved regulatory & authority for the broadcasting & telecommunications, providing regulations for use of cb radios, were in favour of AM and SSB transmissions on the CEPT (mid Band) frequencies. from April 2014 Worth mentioning is that I also had a stake in this, (page 11 Jan Meijer) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/history-of-cb-radio-co-uk/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/history-of-cb-radio-co-uk/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/history-of-cb-radio-co-uk/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/history-of-cb-radio-co-uk/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20History%20of%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fhistory-of-cb-radio-co-uk%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/history-of-cb-radio-co-uk/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/history-of-cb-radio-co-uk/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/history-of-cb-radio-co-uk/?share=telegram) - --- ### [CB Radio Tips and Tricks](https://cbradio.co.uk/cbradio-co-uk-tips-and-tricks/) **Published:** January 20, 2020 **Author:** Jan **Content:** CB radios. Everybody uses them on the trail so here are a few tips and a couple of tricks and a myth or two. **[Do i need a licence to operate a CB radio?](http://ask.ofcom.org.uk/help/radio/cbrad)** No, up until December 2006 it was UK law to obtain an operators licence if u where using a [**cb radio**](https://www.cbradio.co.uk/cb-radio.html) for commercial or domestic use. The good news now is that the law has changed and CB radio is now licence free. **There are a number of things which as drivers on the roads in the United Kingdom we are not permitted to do; one of these is drive whilst using a mobile telephone.** #### What about using Radios to Communicate? This is an exception to the legislation that allows vehicle drivers to use two way radios to communicate providing the radio does not also double up as a mobile telephone. This allows couriers, ambulance drivers and other emergency service personnel to communicate as well as drivers of private taxi cabs Radio Amateurs and **[CB radio](https://www.cbradio.co.uk/cb-radio.html)** Users. Terminology: **VSWR** (swar) this is a ratio of the reflected power (reverse voltage) on your transmission line, the coax. It is just that, a ratio, so there is no such thing as SWAR. It is Voltage Standing wave ratio and the closer you can get to 1:1 the better. **RF** or radio frequency is measured in kilohertz, megahertz or gigahertz. CB radios operate on 26-27 MHz (11M band.) **RX** stands for receive and **TX**stands for transmit. **Watts** this is how the RF power output is measured. **Wavelength** is the actual length of the radio wave in free space. **FM** frequency modulation. **AM** amplitude modulation. **HF** 0 to 30 MHZ **VHF** 30 to 300 Mhz **UHF** 300 Mhz to 3 Ghz All the above with the exception of the amateur radio, Air and military bands uses **FM** or **AM** modulation. legal UK CB radios use **FM** **Coax**used for mobile CB radio is usually rg58u or rg58au another myth is that cutting the coax to a certain length is the best way to help with VSWR. This is totally false. the only thing you do by cutting the coax to a 1/4 wave length or half wave length etc is to fool your wattmeter. best is to make the coax 5.8m (17′) . **Antennas**: A standard 1/4 wave length antenna for CB’s and mounted properly with a good ground plane will get you out super. **The trick to get a good working antenna system is proper mounting**. The further away from large metal obstructions you can get it and the higher you can mount it the better it will perform. an antenna mounted on the mirror frame does not work well simply because there is no metal under it for a ground plane. **the ground plane is electrically the other half of the antenna**. Another thing to stay away from is an antenna that has most of the windings near or at the bottom of the “stick” because an antenna radiates from the top. Take a look at a good FireStik or K40 antenna, the loading is at the top, that is the reason these antennas work well! **Power cables**. Most modern rigs have a good source for powering a CB inside the cab but, take care not to tap into a fuse, wire or cable bundle that has the YELLOW airbag or ECM wires in it or you may get a surprise. Keep the ground wire inside the cab instead of running it all the way into the battery and keep the ground wire short. This helps keep the radio from picking up spark noise and alternator noises. As with any wire job keep the fuse as close to the source as you can for safety reasons. I know most stuff comes with the fuse close to the radio etc but, spend a few quid and put a fuse at the power source. **Did you know** the little ball at the tip of metal antennas has a function? It is to disperse the static electricity the antenna picks up as it is whipped through the air. A 5 amp fuse is usually plenty for all modern CB radios. When attaching the ground wire use a star washer to get a good bite into the metal. **Most problems with wire jobs are due to a poor grounding**. **So on to setting the VSWR or tuning the antenna.** A citizens band (CB) radio antenna is a device designed to do two things: It captures **R**adio **F**requency signals that are then converted to electrical signals by the receiver, and it takes electrical signals from the transmitter and converts them into radio-frequency signals. This second function is where tuning comes into play, because an antenna has to effectively **radiate** radio-frequency signals, something that’s done best when the length of the antenna precisely matches the wavelength of the transmitted radio frequency. You can determine the proper length of an antenna by using a formula: Wavelength (in feet) = 984 / frequency (in megahertz) The CB portion of the spectrum begins at 25.01 megahertz, so a full wavelength antenna would be a bit more than 39.34 feet long. That’s obviously a little long to attach to your bumper, so people tend to use antennas that are a fraction of the wavelength: 1/2, 5/8, 1/4 and 1/8 are all common wavelengths for antennas. In the case of CB, the 1/4 antenna at just under 10 feet long is the common “whip” that you may see on cars and trucks. The trouble is that there are 40 channels on modern CB transceivers, each corresponding to a different frequency. It’s not practical to have a separate antenna for each frequency, so antenna designers have to compromise, usually picking a frequency in the middle of the spread and choosing the antenna length to correspond. When a compromise like this is made, you have to see whether it’s a good compromise. This is done by measuring the Standing Wave Ratio (SWR) of the antenna and cable between the antenna and tuning the antenna until the SWR is acceptable. Every antenna and every antenna feed-line have a characteristic **impedance**, or opposition to electrical current. In an ideal situation, the impedances of line and antenna match perfectly, and 100 percent of the electrical energy sent to the antenna is converted to radio energy and radiated into the atmosphere. In a less than ideal case, when the impedances aren’t perfectly matched, some of the electrical energy sent to the antenna won’t be converted to radio energy, but will be reflected back down the feed-line. The energy reflecting back from the antenna causes **standing waves** of electrical energy in the feed-line. (An example of standing waves outside the electronics world is found in river rapids. When water passes around and between boulders it may form a wave that doesn’t go up or down the river, it just stays in one place. That is a standing wave of water.) The ratio of highest voltage on the line to lowest is the standing wave ratio. In the perfectly matched system, the SWR is 1:1. To tune an antenna, use an SWR meter attached between the transmitter and antenna feed-line. Depending on the meter, you can either use a button on the meter to generate a signal on the various channels, or key the microphone on the CB transceiver to generate a signal while you look at the SWR reading. In general, if the SWR never goes above 1.5:1, you’re in good shape. If the SWR does go above 1.5:1, then watch the meter on different frequencies to see the trend develop: The SWR will be greater either on the higher channels or the lower. If the SWR is greater on the lower channels, then try gradually lengthening the antenna by moving it in the base. If the SWR is greater on the higher channels, try shortening the antenna. Do be aware that the electrical ground of the antenna, the structure around the antenna and any other antennas near the CB antenna can all affect the antenna’s impedance and the SWR. There are enough variables that tuning an antenna blends art and science, but your equipment and radio contacts will all be grateful if you take the time to tune up. **Equipment needed:**SWR meter, short (50cm) patch lead. **Procedure:** The SWR meter needs to be placed in line between the antenna and the CB. Connect the antenna (normally connected to the back of the CB ) to the connector marked “Antenna” or “Ant” on your SWR Meter. Connect one end of the patch lead to the “transmit” or “Xmit” on the SWR meter. Connect the other end to the CB. Assuming you have a standard SWR meter the switches should read as follows: REF or SWR, FWD, and there should be a slide switch marked “set” or “Adjust”. If different consult your meter’s user manual. With the radio on the lowest channel (1 on CB) and the SWR meters switch in the Forward (FWD) position, depress the transmit switch (key up) located on the microphone. While holding the unit in this transmit mode, adjust the meter needle to the set position using the Set or Adjust knob on the meter. As soon as the needle is in alignment with the corresponding mark on the meter face, flip the switch to the Reference (REF) position. The meter is now showing your SWR on channel one. Note the value and quickly release the microphone switch. Record this reading. Repeat the previous step on channels 19 and 40. **How to read your results:** If SWR on channels 1, 19 & 40 is below 2.0, your radio can be operated safely. If SWR on all channels is above 2.0 but not in the “red zone” (normally over 3.0), you may be experiencing coaxial cable reaction (bad quality, wrong length, etc.), insufficient ground plane, or have an ungrounded antenna mount. If SWR is in the “red zone” on all channels, you probably have an electrical short in your coax connectors, or your mounting stud was installed incorrectly and is shorted. Do not operate your radio until the problem is found, serious damage can occur to your radio. If SWR on the lowest channel is higher than it is on the highest channel, your antenna system appears to be electrically short. Your antenna length may need to be increased. If the SWR on channel 40 is greater than that on channel 1, your antenna is considered to be “LONG” and reduction of physical height and/or conductor length will correct this situation Good luck ***SWR AND COAX*** ***THIS PAGE IS BIG BUT LOT’S OF GOOD INFO HERE*** ***WHEN YOU GET DONE YOU WILL KNOW WHAT IS GOING ON*** ***AND WHY!!*** ### SWR TESTING OF MOBILE TRANSMIT ANTENNAS SWR (standing wave ratio) is a term every CB’er should know. SWR (measured with an SWR meter) shows you how well your coax, antenna mount, ground plane and antenna match the output capability of your CB radio. It is a ratio of maximum voltage or current to minimum voltage or current. Generally speaking, the lower the ratio the better. Defective or inferior components, bad installations and antennas not tuned to the specific location on the vehicle increases the SWR. You should strive to achieve a ratio below 2:1 on all channels. Before measuring and setting SWR, it is helpful to know some of the things that can cause problems. Spend a few minutes to read this entire pamphlet and you will go into your project with valuable knowledge. It could save you a lot of time, effort and possibly, money. --- Unlike receive only antennas (AM/FM radio, TV, scanner), antennas that transmit require tuning. Antenna manufacturers can supply you with an antenna that is pre-tuned to the general frequency of the intended equipment, but they cannot promise you perfect performance “out of the box”. The six needed components for a mobile installation are the radio, power feed, coaxial cable, antenna mount, antenna, and ground plane (counterpoise). Even if the manufacturer supplies you with an entire kit (coax, mount & antenna), this, in most cases, leaves you without the counterpoise requirement. There is an exception to this general rule; antenna systems that use the coax cable as a counterpoise. These no-ground-plane kits are generally marketed to owners of fiberglass vehicles. However, for most applications, the mobile antenna will use the vehicle’s body as counterpoise. Unless otherwise stated, the following information pertains to installations that DO NOT use coaxial counterpoise antennas. The vehicle, in mobile installations, is just as important as the antenna and other components. The antenna is the radiating unit, the vehicle is the reflecting unit. All transmit antennas need a reflective unit. What effect does the vehicle have? Plenty! If you were to install and tune your antenna on a bumper mount then move it to the roof, you would see a change in the SWR. This is due to the change in the antenna’s position relative to the vehicle surface. Location is important. It isn’t always feasible, or practical to mount the antenna in the optimum position on any vehicle. Nonetheless, whenever you set aside performance for convenience, you will need to settle for what you can get. Regardless, plan on tuning your antenna. Tuned antennas will give you the best performance you can expect from an antenna mounted in any given location. Most of all, remember that untested installations can cost you big bucks. Operating transmitting radios when the SWR is over 3:1 can damage the radios circuits. Always check your SWR and tune your antenna. There is a lot to know about transmitting antennas. Even if you have your system installed by a professional, it is helpful for you to know what can effect its performance. The following list was compiled from 20 plus years of technical support files. It represents the areas where most of the performance robbing problems crop up. We highly recommend that you read it. The problems and solutions came from real life situations. Starting with knowledge is always better than learning from disappointment. A step by step SWR measuring and antenna tuning procedure follows this very informative list. ### THINGS EVERY CB’ER SHOULD KNOW 1. Every industry has its bottom dwellers. We cannot protect you from them. Consumers who make decisions based strictly on price, or on what someone says instead of what they can do, will often fall prey to the bottom dwellers. 2. Beware of information from “experts” (real or self-proclaimed). There is antenna theory and there is antenna reality. We have yet to see a vehicle that simulates a lab. While theory is a good starting place…experience is the only place to end up. The best book on theory will produce the worst antenna you could own. 3. Some “experts” may “claim” 5/8 wave mobile antennas are not possible because they would need to be 23 feet high. They are wrong! Physical length and ground wave performance are not the same. If you ever hear someone make that claim, ask them how a handheld CB can have a 1/4 wave antenna 8 inches long and 1/4 wave mobile antennas from 12-60 inches long in spite of the fact that a physical 1/4 wave is 108 inches. 4. Never key up or attempt to operate your CB without a working antenna or “dummy load” (non-radiating antenna simulating device) connected to the radios antenna jack, unless you have extra money to buy another radio. 5. All mobile and base transmitting antennas need counter-poise, more commonly called ground plane. The antenna is the reactive unit, the ground plane is the reflective unit. Neither is more important than the other. In mobile installations with standard antenna systems, the vehicle metal (body, frame, etc.) acts as the ground plane. In “no-ground-plane” systems, the coax shield is used for counterpoise. 6. Most, but not all, manufacturers pre-tune their mobile antennas on a test bench. To protect your radio’s circuitry and achieve optimum performance, mobile transmitting antennas (CB, cell phone, amateur, etc.) need to be tuned on the vehicle. 7. Before transmitting, you should check your antenna system for shorts or opens. If you have continuity between the center pin of the connector and the outer threaded housing, you may have a short. Don’t transmit! If you do not find continuity between the center pin of the coax and the antenna base, you have an open. Fix it. (See “Testing Continuity”) Exceptions: Some base loaded antennas use a center tap design and there will be continuity from ground to center conductor. Also, Firestik “No Ground Plane” antenna kits will have coaxial center pin to ground continuity. 8. SWR that pegs the needle on all channels almost always indicates a short in your antenna system. Do not attempt to tune the antenna until the short is fixed. Operating with high SWR will probably damage your CB’s internal circuits. 9. Make sure that the antenna you are using is the right antenna for your application. Don’t use a TV antenna or an AM/FM antenna for your CB. Do not operate your CB without an antenna or dummy load. 10. Transmitting antennas are sensitive to objects in their “near field of radiation.” Tune your antennas in an open area. Never tune inside or next to a building, near or under trees, near or under power lines, and never with a person holding or standing next to the antenna. Try to simulate normal operating conditions. 11. If you mount two or more antennas close to each other, you will alter the transmission patterns of each one. The affect may be either positive or negative. We recommend that a minimum of 12″ exist between your CB antenna and other types of antennas. 12. Your radio cannot tell one component from another. As far as the radio is concerned, the coax, stud mount, mounting bracket, antenna and vehicle is ONE unit. Don’t be too quick to fault your antenna until you are sure that all of the other components have been given equal consideration. 13. Of all antennas returned to Firestik for warranty service, 75% show no signs of being tuned to the vehicle. All antennas should be checked prior to use. Most will require some adjustment. Less than 3% of all returned antennas have actual performance causing problems. Of those, half of the problems are user or installer created. High SWR and other performance problems are 20 times more likely to be caused by bad coax, bad connections, shorted mounts, poor installation location or faulty test meters. 14. In almost every instance, once you get the same SWR reading on channels 1 and 40, further antenna tuning will not improve the readings. If the SWR is still over 2:1, you have other problems to conquer. Exception: There are rare occasions when the ground plane is so small or large that the system is way out of phase (especially with high-performance antennas). If you have high SWR on all channels and have confirmed that you have no opens or shorts in the feedline, try making a small tuning adjustment in the antenna. There are times when the SWR will drop equally across all channels under unusual ground plane conditions. If you find this to be the case, carefully adjust the antenna. 15. SWR that is high on all channels (over 2:1 but not pegging the needle) after the antenna has been tuned normally indicates a ground plane or coax cable problem. 16. The doors, mirrors, spare tire racks, luggage racks, etc. on many vehicles are insulated from a good ground with nylon or rubber bushings. This also stands true for fiberglass vehicles. Make sure that your antenna mount is grounded, even if it entails running a ground wire to the vehicle chassis. Bad hard ground at the mount generally equates to less than optimum performance. Exception: No ground plane antenna kits do not require a grounded mount. 17. If you are hearing whining noises from your radio while your vehicle is running, it is probably due to “dirty power” being supplied to the radio. Under dash power may be more convenient, but the “cleanest” power will be found by running the radio’s power leads straight to the battery. 18. You can never buy coax cable that is too good for your system. Never compromise quality for cost when purchasing coax. Your best bet is to stick with coax that has a stranded center conductor and 90% or higher shielding. 19. Most manufacturers of high performance antennas recommend a specific length of coax cable. If your antenna manufacturer suggests a specific length, give priority to that recommendation. 20. If your ground plane is good, your mount grounded and, your antenna favorably located, coax length rarely becomes an issue. But, if one or more mismatches occur, you may find high SWR. This can often be corrected by using 18 feet lengths of high quality coax. 21. Excess coax between your radio and antenna mount should never be wound into a circular coil of less than 12″ in diameter. Doing so can cause system problems. Your best option for handling excess coax is to serpentine the cable into a 12 to 18 inch yarn-like skein. Secure the skein in the center with a wire tie and tuck it away. 22. Single antenna installations require coax with approximately 50 ohm’s of resistance (RG-58/U, RG-58 A/U or RG-8X). Dual antenna installations require the use of 72 ohm cable (RG-59/U or RG-59 A/U). 23. Coaxial cables with foam (polyfoam) center conductor insulation should be your last choice for use on mobile (vehicle) installations. Even though it will work initially, it has limited life and does not stand up to the conditions encountered in the mobile environment. Choose coax with polyvinyl insulation when doing mobile installs. 24. Coax cables should never be cut and spliced together like common electrical wire. Line losses will occur. 25. Coaxial cable with holes in the outer insulation, severe bends, or door, trunk or hood caused pinches will cause performance problems. Treat your coax with care. 26. If you live in an area where rain and/or sleet is common, wipe your antenna down with a rag that has been coated with WD-40, Armor-All, Pledge, light oil, etc. This trick prevents ice build up that can overload and cause your antenna to break. In an emergency use butter, cooking oil or anything else that will repel water. 27. When tuning your antenna(s), make sure that you do so with the vehicle doors, hood and trunk closed. If left open, they can cause inaccurate SWR readings. Try to simulate actual operating conditions. 28. Mobile antennas, for best performance, should have no less than 60% of their overall length above the vehicles roof line. For co-phased antennas to perform optimally, the space between the top 60% of the two antennas needs to be unobstructed. 29. Remember, all transmitting antennas need ground plane (counterpoise). Base antennas, much like “no ground plane” antennas, build it in. Do not use mobile antennas for base station applications unless you know how to build your own ground plane. 30. If you are installing a single antenna on one side or the other of your vehicle, best on-the-road performance will be realized if the antenna is on the passenger side of the vehicle. 31. Co-phased (dual) antenna installations create a radiation pattern that favors communication directly in front and back of the vehicle. This is why co-phase systems are popular with people who do a lot of highway driving. Co-phase antennas must be center or top loaded. Top loaded antennas are the best. 32. Some people believe that co-phased antennas must be separated by a minimum of nine (9) feet. We have successfully used co-phase antenna systems with spacing as little as four (4) feet. Space alters the pattern and not always negatively. Each vehicle will be different. 33. Co-phase antennas can improve performance on vehicles that lack good ground plane characteristics (fiberglass motorhomes, trucks, etc.). Instead of using available metal to reflect the radiated energy, the antennas use each others field. 34. When tuning co-phased antennas (dual), it is best to adjust both antennas an equal amount to maintain equality in their individual resonant frequency. 35. On a co-phase system, if you try to tune each antenna independently using RG-58 type coax and then connect them to the co-phasing harness, you will almost always find that they will appear electrically short as a set. We recommend that you first assemble the entire system. Take all measurements and make all adjustments with both antennas in place. 36. If you are experiencing SWR that is high across the entire band and have eliminated shorts, opens, groundless mounts and coax as potential problems, suspect lack of ground plane. Try adding a spring or quick disconnect to the antenna base. In some cases, the repositioning of the antenna relevant to available ground plane will solve the problem. 37. One of the greatest benefits of the FS series (patented tunable tip) antenna is noted when there is lack of available ground plane. If the tuning screw reaches its “maximum out” position before satisfactory SWR is realized, a common 1/4-20 threaded bolt or screw of a longer length can be used to replace the supplied tuning screw. If the vinyl cap is too short to remain in place, the user can disregard it or clip a hole in the top for the longer screw to pass through. 38. In rare instances, like antennas mounted in the middle of a metal van roof, excess ground plane can cause a problem. This usually shows up as high SWR across the band. In these cases, a tunable tip antenna may not be the best choice. The reason being, the antenna is too long and the tunable tip cannot adjust down far enough (see line 40). If you suspect this, an antenna that wire can be removed from will usually fit the bill (i.e. KW or RP series). 39. There may be situations when a tunable tip will bottom out before optimum tuning is achieved. If this happens, try removing the knurled jam nut and finger tighten the tuning screw against the o-ring. If still too long, remove the tuning screw altogether. If total removal causes the antenna to go short, cut the tuning screw in half and re-insert it into the tuning extender and re-test. The following items on the FS Series “tunable tip” antennas, when removed, will have an effect on SWR (in order from least effect to most effect). O-ring, jam nut, tuning screw mass (cutting off length), vinyl cap, tuning screw complete. 40. The vinyl cap on any “tunable tip” Firestik antennas is optional. However, your antenna needs to be tuned as it will be used . . . with or without the tip. 41. Magnetic mounts should be used in temporary situations only. If you leave them in the same spot for a long period, the paint will not age like that of the uncovered areas and/or moisture will be trapped between the mount and vehicle causing rust or discoloration. Periodically lift the magnet and gently clean off the underside of the magnet and the vehicle surface. 42. It is a bad idea to use magnetic mounts and amplifiers together. Magnetic mounts rely on capacitance grounding. This situation can literally cause the paint under the mount to bubble or discolor due to excessive heat build up. 43. On wire-wound antennas that require wire removal for tuning purposes, best overall performance will be achieved by keeping the loose end of the wire pressed down tightly against the wire coil. If you use power amplification on top loaded antennas and do not process the end of the wire load so it can dissipate its heat into other adjacent coils, you can melt the tip of the antenna. 44. Generally speaking, center loaded antennas perform better than base loaded antennas, and top loaded antennas perform better than all. For any given antenna design (base, center or top loaded), the taller the antenna the better. With length comes a wider bandwidth (lower SWR over more channels), more power handling capability and overall performance increases. 45. When ultimate mobile performance is desired, function should be given precedence over mounting location convenience and appearance. 46. Don’t confuse SWR with overall performance. You should seek SWR of 2:1 or lower on channel 1 and 40, but keep in mind that best performance may not be found at the lowest SWR readings. For the most part, if you get your SWR below 2:1, on both ends of the band, don’t be overly concerned about using meter tricking procedures that bleed off energy. 47. The SWR meters built into CB radios are okay for general readings, but are rarely sensitive and/or accurate enough for fine tuning of antennas. Use them mostly to indicate serious high SWR problems only. 48. Firestik has tested literally hundreds of SWR meters. A large percentage of these have shown to be off by 0.3 to 0.7 when compared to a piece of certified equipment. There is no standard among production meters. However, unless a unit is defective, most will indicate the most serious problems that you might encounter 49. Aside from cost, the type of wire used in or on antennas (copper, silver, aluminum, gold, tinned, etc.) has negligible effect on antenna performance. The antenna must be designed to resonate with the wire type and gauge chosen by the designer. However, larger wire gauges will normally increase the bandwidth and heat dissipation abilities of the antenna. 50. Copper is 55% better than aluminum, 27% better than gold and 578% better than tin insofar as conductivity is concerned. Silver will conduct AC/DC current less than 2.5% more efficiently than copper, but the cost to performance is generally unjustified and any gain, insofar as RF transmission is concerned, is negligible. 51. If devices other than an SWR meter are going to be used between the CB radio and antenna, always tune the antenna system first without that device in line. If SWR is high with the other device in line, you will know where the problem is. 52. In “no ground plane” systems, it is best to choose a system that terminates the coaxial ground at the radio end of the cable. These systems are far less reactive to cable routing errors and will almost always outperform systems that are terminated at the antenna base or antenna end of the coax. 53. Cables and antennas from standard & no-ground plane kits are not interchangeable. The “No Ground Plane” antennas from Firestik have a yellow band near the base. 54. Wire wound antennas with a plastic outer coating will greatly reduce audible RF static when compared to metal whip antennas. 55. If you leave your antenna on your vehicle permanently, remove the rubber o-ring that is found on the threaded base of some antennas. Tighten permanent antennas with a wrench. Add a lock washer if you want. 56. If you use mirror mounts and often find yourself in areas with overhead obstructions, tighten the bolts just enough to keep the antenna vertical at highway speeds. If the antenna contacts something overhead, the mount will rotate on the mirror arm and protect your antenna. 57. If you use long antennas and find that they bend too far back at highway speeds, tilt them forward if possible. When under a wind load, they will end up in a relatively vertical position. 58. On antennas that are topped off with a vinyl tip, make sure that you take your SWR measurements with the tip in place. If you tune your antenna with the tip off and then reinstall the tip, your SWR will change. 59. Without advocating the use of power amplifiers or unauthorized channels, take note that the Firestik II tunable tip antennas have a fairly large metal tip that broadens the bandwidth and dissipates a considerable amount of heat. 60. It is illegal to use power amplifiers with CB radios. It is illegal to “tweak” the radios internal circuits to increase output power. The transmitter power of a legal, FCC certified CB radio is 4 watts AM. 61. If having one antenna for CB/AM/FM is appealing, use a CB antenna and a splitter that allows it to be connected to your AM/FM radio. Devices that let you use your AM/FM antenna for CB use will leave you disappointed. 62. On a budget? Buy a cheap radio and a good antenna. Aside from added bells and whistles, all CB’s are FCC regulated to transmit no more than 4 watts of power. A good antenna on an inexpensive radio will almost always outperform a bad antenna on an expensive radio. 63. Beware of the wire wound mobile antennas mentioned in ads that claim them to be “full-wave” or “wave and a half”. At best, you are being deceived by the misleading association of wire length to actual performance characteristics. Wire length, for all intents and purposes, is irrelevant. With “very” few exceptions, antennas must function as a 1/4 wave or 5/8 wave to be useful on mobile installations. For example, Firestik and Firestik II antennas between 2 foot and 5 foot have a radiation pattern similar to a 5/8 wave reference antenna. However, wire lengths range from 20 feet to 32 feet (0.6 to 0.9 of a full wave length). If wire length was relevant, each antenna would need 22.5 feet of wire. ### TESTING CONTINUITY Checking your CB antenna system for continuity, shorts and opens is a MUST process and should always precede SWR checks and settings. Exception: Cable supplied with ‘No Ground Plane’ antenna kits will have continuity between the center lead and ground. ![](https://i0.wp.com/www.klimaco.com/sitepix/contnuty.gif?resize=500%2C594)![Checking your CB antenna system for continuity](https://i0.wp.com/www.cbradio.co.uk/images/cache/contnuty.500.gif?ssl=1) ### SETTING THE SWR OF YOUR ANTENNA SWR (standing wave ratio), is a measurement of how efficiently your antenna system will radiate the power available from your radio. In simple terms, your radio would like to radiate all of its power, but can only do so if the other components cooperate. Bad coax and mounts, or inefficient antennas and ground plane can cause system bottlenecks. The easiest way to understand the concept is to think of it in terms of water flow. That is, if you put a one inch faucet on a two inch pipe, your potential output will be restricted by the one inch outlet. So goes antenna systems. Setting your antennas SWR will reduce the restriction of radiated power. If all radios only transmitted on one channel, it would be a much easier task to design antennas. As it is, on CB alone, there are 40 channels to contend with. Mobile antennas can only be made to resonate at one specific frequency (channel). The goal of the antenna manufacturers is to build the antenna to resonate at a frequency in the middle of the available band (channel 19 on CB) and make it broad- banded enough to keep the off-frequency related SWR at the two extreme ends of the band below 2.0:1. It should be noted that if you communicate on one or two adjacent channels anywhere within the band, you can tune your antenna to achieve optimum performance on those channels. Most people, however, prefer to use the entire bandwidth when tuning. ### THINGS YOU WILL NEED 1. Knowledge of what not to do …. read previous sections. 2. Properly installed antenna system (mount, coax and antenna) that was made for the type of radio you will be using and has been tested for shorts and opens in continuity. (See “Testing Continuity”) 3. Functional radio. 4. SWR meter. (See “SWR Meter Hook-Up”) 5. Short piece of coaxial cable (jumper) with PL-259 connectors on both end. ### SWR METER HOOK-UP The SWR of the antenna, without feedline, can be measured by placing the SWR meter in-line at the antenna instead of at the radio. However, the coax can help or hinder performance. In the end, your SWR should be checked at the radio end because all components will be a part of the final operational system being used. ### SWR TESTING REMINDERS: 1. Remember to check for continuity, shorts and opens in your coax and mount installation first. 2. Take measurements in an open area with the vehicle’s doors and hatches closed. 3. All measurements should be taken with antenna tip on, unless you do not plan to use the tip in normal use. ### THE SET UP If already connected, disconnect the coaxial cable from the radio. Connect the coax cable that normally connects to the back of the radio to the SWR meter connector marked “Antenna” or “Ant”. Now, connect one end of the jumper cable to the back of the radio and the other end to the SWR meter connection marked “Transmitter” or “Xmit”. Your SWR meter is now in series (in-line) with your radio and antenna. Since you’ve already read the previous parts of this pamphlet, you should now have your vehicle in an open area, with all doors closed. Turn your radio on and tune to channel one or the lowest channel on your radio. If your radio has side band operation, make sure you are in AM mode before doing SWR tests. The following assumes that your SWR meter has a standard set of switches, knobs and meters. That is, there will be at least one switch with the marking Forward (FWD) in one position and Reference (REF or SWR) in the other. There will also be a knob or sliding controller marked “Set” or “Adjust”. Most meters come with full instructions. If the common configuration does not match your meter you will need to rely on the meters manual for assistance. With the radio on the lowest channel (1 on CB) and the SWR meters switch in the Forward (FWD) position, depress the transmit switch (key up) located on the microphone. While holding the unit in this transmit mode, adjust the meter needle to the set position using the Set or Adjust knob on the meter. As soon as the needle is in alignment with the corresponding mark on the meter face, flip the switch to the Reference (REF) position. The meter is now showing your SWR on channel one. Note the value and quickly release the microphone switch. Record this reading on your paper to the nearest 1/10th. i.e. 1.8, 2.3, 2.7, 1.4, etc. Now, switch your radio to the middle channel (19 on CB). Place the meter switch in the Forward (FWD) position, depress the microphone switch and adjust the meter to place the needle on the Set position of the meter face. Once in the set position, place the meter switch in the Reference (REF) position and note the reading. Release the microphone switch and write this value down to the nearest tenth of a point. Note: If your antenna system is closely matched to the radio you may get little or no movement from the meter needle on this channel. This is normal. Finally, place your radio on the highest number channel (40 on CB). Place the meter switch in the Forward (FWD) position, depress the microphone switch and adjust the meter to place the needle on the Set position of the meter face. Once in the set position, place the meter switch in the Reference (REF) position and note the reading. Release the microphone switch and write this value down to the nearest tenth of a point. With these three readings, you can determine many things about your system. For instance … - If SWR on channels 1, 19 & 40 is below 2.0, your radio can be safely operated on any channel without causing damage to the radio’s circuitry. - If SWR on all channels is above 2.0 but not in the “red zone” (normally over 3.0), you may be experiencing coaxial cable reaction (bad quality, wrong length, etc.), insufficient ground plane, or have an ungrounded antenna mount. - If SWR is in the “red zone” on all channels, you probably have an electrical short in your coax connectors, or your mounting stud was installed incorrectly and is shorted. DO NOT USE YOUR RADIO UNTIL YOU HAVE FOUND THE PROBLEM. - If SWR on the lowest channel is higher than it is on the highest channel, your antenna system appears to be electrically short. See the following section title “Adjusting Short Antennas”. ### ADJUSTING LONG ANTENNAS If the SWR on channel 40 is greater than that on channel 1, your antenna is considered to be “LONG” and reduction of physical height and/or conductor length will correct this situation. Depending upon antenna model, this entails screwing down the tunable tip (Illustration #1: Firestik II, Firefly), or, removing the tip, making short slits in the plastic covering and unwinding and clipping off wire (Illustration #2: Firestik, Road Pal). Firestik Designer Series antennas require loosening the allen screws and lowering the metal whip (Illustration #3). ![Antenna Model Tuning Tips](https://i0.wp.com/www.cbradio.co.uk/images/cache/tuning2.500.gif?ssl=1) ### ADJUSTING SHORT ANTENNAS If SWR on channel 1 is greater than that on channel 40, your antenna is considered to be “SHORT” and increasing the physical and/or electrical length of the antenna is required to correct this situation. Because we make our antennas extra long, readings which indicate “Short” normally stem from ground plane deficiency (lack of vehicle metal surface for the antenna to reflect its signal rom). This condition is often corrected by adding a spring and/or quick disconnect to increase the physical height. Ground plane deficiencies can also be compensated for by using dual (co-phased) antennas or special no-ground-plane antenna kits. Lengthening of the Firestik II and Firefly is accomplished by turning the tuning screw further out (Illustration #1). On Firestik and Road Pal models, it requires tip removal, short slits in the plastic covering and, the separation and upward repositioning of three or more wire turns (Illustration #4). Firestik Designer Series antennas require loosening the allen screws and raising the metal whip (Illustration #3). NOTE: The shorter the antenna, the more sensitive it is to adjustments. For example, removing two wire turns on a 4 foot antenna might move the SWR by 0.3; the same amount removed from a 2 foot antenna may move the SWR by 1.0. Make smaller adjustments on shorter antennas. ### DUAL ANTENNAS Measurements and determination of short or long conditions are the same as the single antenna procedure. However, when tuning co-phased antennas, if you adjust one antenna, it is advisable to adjust the other in equal amounts to keep them in perfect balance. ### COAX CABLE PROCESSING with FIRESTIK CONNECTORS [Using ring/spade terminals](http://www.klimaco.com/klimacopages/swrand.htm#Using%20RingSpd%20Terminals) [Using PRO-259 with cable type insert.](http://www.klimaco.com/klimacopages/swrand.htm#Installing%20PRO-259) [Using Twist-On connector (T6-259 or T7-259)](http://www.klimaco.com/klimacopages/swrand.htm#Installing%20T6-259%20twist%20on%20cnnctr) [Using Twist-On connector w/ rubber boot](http://www.klimaco.com/klimacopages/swrand.htm#Installing%20Twist%20on%20cnnctr%20w%20rubber%20boot) (BT6-259 or BT7-259) [Using CP-259 to build co-phasing harness](http://www.klimaco.com/klimacopages/swrand.htm#INSTALLING%20CP-259%20CO-PHASING) ### THINGS TO KNOW - RG-58 refers to any RG-58 type cable such as RG-58-U or RG-58-A/U. - RG-59 refers to any RG-59 type cable such as RG-59-U or RG-59-A/U. - The “A” designation after RG-58 or RG-59 indicates a stranded center conductor, wire made up of numerous individual strands versus one solid wire. - RG-58 type coax is 50 ohm cable and is used for single antenna installations of CB, scanner, 2-meter, and 10-meter Firestik antennas. RG-8 and RG-8X are other common coax types that can be used on single antenna installations. - RG-59 type coax is 72 ohm cable. It is used for dual (co-phased) CB, 2-meter or 10-meter installations. It is also commonly used for TV antennas and AM/FM receive only antennas. Do not use this coax on single CB antenna installations. - The length, type and quality of the coaxial feedline can have a major effect on system performance. If in doubt, use 18ft coax that has the “A” designation after the RG type. - The coax used on Firestik “no-ground-plane” kits must never be altered. It’s length and internal features are critical to proper operation. - The shield on “no-ground-plane” kits is intentionally not used at the mount end of the coax. Leave as is. - The shield portion of the coax cable is almost always used as the ground. ![Anatomy of 'Fire-Flex' Coax Cable](https://i0.wp.com/www.cbradio.co.uk/images/cache/coaxanat.500.gif?ssl=1) ### PROCESSING COAX FOR RING/SPADE TERMINALS 1. Remove 1″ (38 mm) of the cable’s protective cover (see Diagram A, next page). 2. Use end of nail or other pointed object to unbraid the copper shield. When done, pull to one side and twist into a single wire. Trim off any loose ends. 3. Remove 3/8″ (10 mm) of the center conductor insulation and dress by twisting strands into one wire. 4. If soldering equipment is available, tin the ends of both wires. 5. If shrink tubing will be used for additional insulation, slide over wire end(s) at this time. 6. Crimp and/or solder terminal(s) to appropriate wire. In most cases, the larger of the two terminals will go on the center conductor. If both terminals are the same size but one has it’s own insulation, this should be used on the center conductor. 7. If shrink tubing was used, slip it over the terminal end and heat until properly fitted. 8. Test your work for opens or shorts (see “Testing Continuity”). ![Processing coax for ring/spade terminals](https://i0.wp.com/www.cbradio.co.uk/images/cache/coax-a.500.gif?ssl=1) ### INSTALLING PRO-259 WITH CABLE INSERT NOTE: Soldering iron and solder required for this connector. 1. Slide appropriate cable adapter over coax, INS-58 for RG58 cable or INS-59 for RG59 or RG8X cable. Make sure wide shoulder is down, threaded portion up (see Diagram B). 2. Remove (unscrew) PRO-259 knurled barrel sleeve from main connector and drop over coax. Make sure that the internal threads are up. 3. Remove 1″ (25 mm) of the cables outer cover. 4. Use end of nail or other pointed object to unbraid the copper shield. Trim to approximately 1/2″ (12mm) long all the way around. 5. Remove 1/2″ ( 12 mm) of the center conductor insulation and dress by twisting all strands into one wire. 6. Use your soldering iron to tin the end of the center conductor wire. 7. Slide the insert up the cable until the top is even with the trimmed edge of the outer cover. Fold the braided shield over the top of the insert. Make sure the wire does not lay in the treads of the insert. If the braid is a little long, twisting the braid around the insert will keep it out of the threads. 8. Thread the main connector body on to the cable insert until fully seated. Locate shield through one or more holes in main body. Heat body and shield at one or more access holes and fill with solder. 9. Solder center conductor where it protrudes from center pin of main body. Do not over fill or pin will be to fat to fit into mating connector. Trim off any excess wire. 10. Slide the knurled barrel up the cable and re-thread to the main body. 11. Test your work for opens or shorts (see “Testing Continuity”). ![Coax Cable Insert Installation Tips](https://i0.wp.com/www.cbradio.co.uk/images/cache/coax-b.500.gif?ssl=1) ### INSTALLING T6-259 OR T7-259 TWIST-ON CONNECTOR Note: Soldering iron and solder required for this connector. 1. Select appropriate connector for cable type, T6 for RG-58 or T7 for RG-59 coax. 2. Remove (unscrew) knurled barrel sleeve from main connector and drop over coax. Make sure that the internal threads are up (see Diagram C). 3. Remove 1″ ( 25 mm) of cables outer cover. 4. Use end of nail or other pointed object to unbraid the copper shield. Trim to approximately 3/8″ (10mm) long all the way around. 5. Remove 1/2″ ( 12 mm) of the center conductor insulation and dress by twisting all strands into one wire. 6. Use your soldering iron to tin the end of the center conductor wire. 7. Fold the braided shield down over the top of the outer cover. 8. Thread the main connector body on to the cable until fully seated or the center conductor is at the end of the main body center pin. 9. Solder center conductor where it protrudes from center pin of main body. Do not over fill or pin will be to fat to fit into mating connector. Trim off any excess wire. 10. Slide the knurled barrel up the cable and re-thread to the main body. 11. Test your work for opens or shorts (see “Testing Continuity”). ![Diagram C Twist-on Connector Installation Guide](https://i0.wp.com/www.cbradio.co.uk/images/cache/coax-c.500.gif?ssl=1) ### INSTALLING BT6-259 OR BT7-259 TWIST-ON CONNECTOR W/ RUBBER BOOT Note: Soldering iron and solder required for this connector. 1. Select appropriate connector for cable type, BT6 for RG-58 or BT7 for RG-59 coax. 2. Slide rubber boot over cable with large opening up. 3. Remove (unscrew) knurled barrel sleeve from main connector and drop over coax. Make sure that the internal threads are up (see Diagram D). 4. Remove 1″ (25 mm) of cables outer cover. 5. Use end of nail or other pointed object to unbraid the copper shield. Trim to approximately 1/4″ (6mm) long all the way around. 6. Remove 1/2″ (12 mm) of the center conductor insulation and dress by twisting all strands into one wire. 7. Use your soldering iron to tin the end of the center conductor wire. 8. Fold the braided shield down over the top of the outer cover. 9. Thread the main connector body on to the cable until fully seated or the center conductor is at the end of the main body center pin. 10. Solder center conductor where it protrudes from center pin of main body. Do not over fill or pin will be to fat to fit into mating connector. Trim off any excess wire. 11. Slide the knurled barrel up the cable and re-thread to the main body. 12. Slide rubber boot up cable and snap over the main body (2 clicks) 13. Test your work for opens or shorts (see “Testing Continuity”). ![Diagram D Twist-on Connector Installation](https://i0.wp.com/www.cbradio.co.uk/images/cache/coax-d.500.gif?ssl=1) ### INSTALLING CP-259 “CO-PHASING HARNESS” CONNECTOR Note: Soldering iron and solder required for this connector. 1. Remove (unscrew) knurled barrel sleeve from main connector and drop over both pieces of coax. Make sure that the internal threads are up (see Diagram E). 2. Remove 1″ (25 mm) of both cables outer cover. 3. Use end of nail or other pointed object to unbraid the copper shield. Trim to approximately 1/2″ (12mm) long all the way around. 4. Remove 1/2″ (12 mm) of the center conductor insulation from both cables and dress each by twisting all strands together. 5. Use your soldering iron and lightly tin the ends of both center conductor wires. 6. Fold the braided shield down over the top of the outer cover on both cables. 7. Insert each cable into the connector body making sure the center conductor protrudes from the body center pin. 8. Solder center conductor where it protrudes from center pin of main body. Do not over fill or pin will be to fat to fit into mating connector. Trim off any excess wire. 9. Solder the shield on both cables to the main body using the corresponding access hole. 10. Slide the knurled barrel up the cable and re-thread to the main body. 11. Test your work for opens or shorts (see “Testing Continuity”). ![Diagram E Co-phasing connector](https://i0.wp.com/www.cbradio.co.uk/images/cache/coax-e.500.gif?ssl=1) NOTE: If you will be using grommets to protect your cable where it passes through the vehicle body, make sure the grommets are on the cable before processing connector(s). ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cbradio-co-uk-tips-and-tricks/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cbradio-co-uk-tips-and-tricks/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cbradio-co-uk-tips-and-tricks/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cbradio-co-uk-tips-and-tricks/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Tips%20and%20Tricks&body=https%3A%2F%2Fcbradio.co.uk%2Fcbradio-co-uk-tips-and-tricks%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cbradio-co-uk-tips-and-tricks/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cbradio-co-uk-tips-and-tricks/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cbradio-co-uk-tips-and-tricks/?share=telegram) - --- ### [Terms and Conditions](https://cbradio.co.uk/cbradio-co-uk-terms-and-conditions/) **Published:** January 20, 2020 **Author:** Jan **Content:** **UK 4×4 Norfolk CB centre** Every NEW item sold by us is unconditionally guaranteed for 1 year unless otherwise specified. We will replace any faulty item or refund minus postage and packing, your choice. Return Postage and packing is the responsibility of the buyer. We pay to post the replacement back to you. If an item is returned that is NOT faulty, a 20% restocking fee will be applied. Although the information and specifications on our site are presented in good faith and believed to be correct, The UK 4×4 Norfolk CB Centre makes no representations or warranties as to the completeness or accuracy of the information. **Delivery of goods** All prices on [www.cbradio.co.uk](http://www.uk4x4centre.co.uk/) are in **GBP** unless otherwise stated. Our aim is to deliver your order within 5 working days following receipt of payment. Payments are due within 5 days of purchase. Cheques or postal orders have to be cleared before goods can be released which can take up to 7 days. Items will be despatched same day if possible but 2 working days to process the order should be allowed for. If temporarily out of stock you will receive an email notifying you of the expected date of delivery and a second email when the order has been despatched. We accept no liability whatsoever for the efficiency or otherwise of the postal service. We always obtain proof of posting. Orders over 5 Kg might benefit from our courier delivery service. Email us and we will provide you with a quote. Problems with packaging products are rare but occasionally they do happen. Any offers to replace goods or give refunds will not include postage. To ensure faster, easier and secure payments for your purchase, we accept PayPal or credit card payments only for orders placed from outside The United Kingdom Special offers are subject to terms and conditions All goods remain property of us until paid for in full. **We reserve the right to replace out of stock items with similar products of the same standard** **Postage and packing** Default shipping is by Royal Mail Standard Packet Rate if sent from our head office in the United Kingdom or TNT post if sent from our branch in the Netherlands. Other services are available on request only. Postage is always at the current rate. We will combine shipping on multiple items to give you the best value. We have a flat fee P&P for international parcels from 1 to 5 Kg of €15.00. C.O.D is not possible for international deliveries. **Returns** Whilst problems are rare we will replace or refund any items that are defective, even though as retailers we have no control over the manufacturing process. However, we must be informed of any problems within 7 days and before returning any item. Unarranged returns will not be accepted. - Our return policy allows merchandise to be returned for a refund or exchange within 30 days from day of purchase. Returned merchandise must be **unused**, in original packaging and include all accessories. A restocking fee of 20% will be applied if the merchandise is used. Buyer is responsible for return shipping. - After 30 days and within 6 months of the purchase date, the buyer can return the merchandise for repair or replacement. Buyer is responsible for the cost of returning the item. We will repair or replace the item and return it to you at no charge. If the return is for any other reason, a 35% restocking fee will be charged and only if the item is returned in good condition and in the original box with all accessories. Additional charges may apply if those conditions are not met. - Returns after 6 months to within 1 year of purchase will be subject to a minimum restocking fee of 30% of the original purchase price. Additional charges may apply if the item is not returned in the original packaging and there are signs of damage (scratches, dents, etc.), or if all original accessories are not included. - We will employ every resource to ensure that your item is replaced promptly and without hassle. Please contact us for any product or service issues before filing a complaint to the original purchase site. **Warranty** all our new products sold in our shop or on eBay are covered by 1 year warranty against manufacturing defects however warranty does not cover damages or failures as a result of accidents, misuse, neglect, abuse, mishandling of the product, misapplication, installation faults, improper maintenance/voltage supply, interference occurring from other electronic devices, alterations/modifications/maladjustments of user controls, service by unapproved or unqualified technicians. Final transistors for both radio and linear amplifiers are never covered under warranty, neither by ourselves nor by the manufacturer due to mismatch of SWR or power. If the product is believed to be faulty due to a manufacturing defect it should be returned to us for testing and if confirmed to be faulty then within 30 days of purchase you will receive a replacement, after 30 days it will be sent back to the supplier for repair if the product can’t be repaired we will arrange for a replacement or refund if no fault or manufacturing defect is found by our technical department the product will be returned at the buyers cost Your Personal information is Safe and any personal information will be treated according to the data protection act 1998. http://www.opsi.gov.uk/Acts/Acts1998/ukpga\_19980029\_en\_1 Fraudsters and anyone found abusing this site or abusing our services will be barred and details will be deleted after passing to the appropriate authorities. If necessarily we will seek legal advice. All prices on our site are in **GBP** unless otherwise stated. All information, specification of products and prices etc are subject to change without notice. All brand names on our site are copyrighted by their rightful owners Images are for illustration purpose only actual product may vary All quotes, special offers and mutual agreements are subject to our terms and conditions laid out in this document. www.cbradio.co.uk E&OE ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cbradio-co-uk-terms-and-conditions/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cbradio-co-uk-terms-and-conditions/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cbradio-co-uk-terms-and-conditions/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cbradio-co-uk-terms-and-conditions/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Terms%20and%20Conditions&body=https%3A%2F%2Fcbradio.co.uk%2Fcbradio-co-uk-terms-and-conditions%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cbradio-co-uk-terms-and-conditions/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cbradio-co-uk-terms-and-conditions/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cbradio-co-uk-terms-and-conditions/?share=telegram) - --- ### [Blog](https://cbradio.co.uk/cbradio-co-uk-blog/) **Published:** January 20, 2020 **Author:** Jan **Content:** [ ![CB Radio Versus Network Radio Which Fits?](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/09/cb-radio-versus-network-radio-which-fits-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/cb-radio-versus-network-radio/ "CB Radio Versus Network Radio Which Fits?") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [CB Radio Versus Network Radio Which Fits?](https://cbradio.co.uk/cb-radio-versus-network-radio/) CB radio versus network radio: compare coverage, running costs, installation and real-world use for 4x4s, fleets and rural UK journeys ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 5th September 2026 No Comments [ ![CB Coax Cable Replacement: When You Need It](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/09/cb-coax-cable-replacement-when-you-need-it-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/cb-coax-cable-replacement/ "CB Coax Cable Replacement: When You Need It") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [CB Coax Cable Replacement: When You Need It](https://cbradio.co.uk/cb-coax-cable-replacement/) Learn when CB coax cable replacement is needed, how to trace faults, choose 50-ohm cable and fit PL-259 plugs for ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 3rd September 2026 No Comments [ ![How to Set RF Gain for Clearer CB Reception](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/09/how-to-set-rf-gain-for-clearer-cb-reception-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/how-to-set-rf-gain/ "How to Set RF Gain for Clearer CB Reception") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [How to Set RF Gain for Clearer CB Reception](https://cbradio.co.uk/how-to-set-rf-gain/) Learn how to set RF gain on a CB radio for clearer reception, less background noise and dependable mobile or ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 1st September 2026 No Comments [ ![Convoy Communication CB Setup Example for 4x4s](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/08/convoy-communication-cb-setup-example-for-4x4s-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/convoy-communication-cb-setup-example/ "Convoy Communication CB Setup Example for 4x4s") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [Convoy Communication CB Setup Example for 4x4s](https://cbradio.co.uk/convoy-communication-cb-setup-example/) Use this convoy communication CB setup example to choose a radio, aerial and channel plan that keeps UK 4x4 groups ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 30th August 2026 No Comments [ ![Extension Speakers for Clearer CB Radio Audio](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/08/extension-speakers-for-clearer-cb-radio-audio-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/ "Extension Speakers for Clearer CB Radio Audio") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [Extension Speakers for Clearer CB Radio Audio](https://cbradio.co.uk/extension-speakers-clearer-cb-radio-audio/) Choose extension speakers for clearer CB audio in 4x4s, cars and homebase stations. Learn impedance, wattage, fitting and noise control ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 28th August 2026 No Comments [ ![Homebase Versus Mobile CB for UK Drivers and Hobbyists](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/08/homebase-versus-mobile-cb-for-uk-drivers-and-hobby-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/homebase-versus-mobile-cb/ "Homebase Versus Mobile CB for UK Drivers and Hobbyists") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [Homebase Versus Mobile CB for UK Drivers and Hobbyists](https://cbradio.co.uk/homebase-versus-mobile-cb/) Compare homebase versus mobile CB for UK use, from aerial choice and power supplies to installation, range, portability and everyday ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 26th August 2026 No Comments [ ![How to Connect Extension Speaker to a CB Radio](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/08/how-to-connect-extension-speaker-to-a-cb-radio-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/how-to-connect-extension-speaker/ "How to Connect Extension Speaker to a CB Radio") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [How to Connect Extension Speaker to a CB Radio](https://cbradio.co.uk/how-to-connect-extension-speaker/) Learn how to connect extension speaker units to a CB radio, choose the right plug, mount it well and diagnose ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 24th August 2026 No Comments [ ![AM FM CB Radios: What UK Drivers Need to Know](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/08/am-fm-cb-radios-what-uk-drivers-need-to-know-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/ "AM FM CB Radios: What UK Drivers Need to Know") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [AM FM CB Radios: What UK Drivers Need to Know](https://cbradio.co.uk/am-fm-cb-radios-uk-drivers/) AM FM CB radios explained for UK drivers: modes, legal use, aerial choice and practical advice for 4x4s, lorries and ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 22nd August 2026 No Comments [ ![How to Select CB Microphone for Your Radio](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/08/how-to-select-cb-microphone-for-your-radio-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/how-to-select-cb-microphone/ "How to Select CB Microphone for Your Radio") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [How to Select CB Microphone for Your Radio](https://cbradio.co.uk/how-to-select-cb-microphone/) Learn how to select CB microphone equipment for UK mobile or homebase use, from connector wiring and compatibility to controls, ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 20th August 2026 No Comments [ ![CB Radio vs Ham for UK Drivers and Hobbyists](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/08/cb-radio-vs-ham-for-uk-drivers-and-hobbyists-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/ "CB Radio vs Ham for UK Drivers and Hobbyists") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [CB Radio vs Ham for UK Drivers and Hobbyists](https://cbradio.co.uk/cb-radio-vs-ham-uk-drivers-hobbyists/) CB radio vs ham radio explained for UK drivers and hobbyists: compare licences, range, equipment, aerials and the right choice ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 18th August 2026 No Comments [ ![Magnetic Versus Fixed CB Aerial for Your Vehicle](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/08/magnetic-versus-fixed-cb-aerial-for-your-vehicle-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/ "Magnetic Versus Fixed CB Aerial for Your Vehicle") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [Magnetic Versus Fixed CB Aerial for Your Vehicle](https://cbradio.co.uk/magnetic-versus-fixed-cb-aerial/) Compare magnetic versus fixed CB aerial options for fitting, performance, security and everyday use, then choose the right setup for ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 16th August 2026 No Comments [ ![CB Squelch Adjustment for Clearer Mobile Calls](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/08/cb-squelch-adjustment-for-clearer-mobile-calls-featured.webp?resize=1024%2C683&ssl=1) ](https://cbradio.co.uk/cb-squelch-adjustment/ "CB Squelch Adjustment for Clearer Mobile Calls") [Uncategorised](https://cbradio.co.uk/category/uncategorised/) ## [CB Squelch Adjustment for Clearer Mobile Calls](https://cbradio.co.uk/cb-squelch-adjustment/) Set your CB squelch adjustment correctly to cut background hiss without missing weak calls on the road, off-road trails or ... ![](https://secure.gravatar.com/avatar/?s=60&d=mm&r=g) 14th August 2026 No Comments Showing Slide 1 of 13 1[2](https://cbradio.co.uk/wp-admin/admin-ajax.php/page/2/?action=as_async_request_queue_runner&nonce=f2f19ba25d)[3](https://cbradio.co.uk/wp-admin/admin-ajax.php/page/3/?action=as_async_request_queue_runner&nonce=f2f19ba25d)[4](https://cbradio.co.uk/wp-admin/admin-ajax.php/page/4/?action=as_async_request_queue_runner&nonce=f2f19ba25d)[5](https://cbradio.co.uk/wp-admin/admin-ajax.php/page/5/?action=as_async_request_queue_runner&nonce=f2f19ba25d) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/cbradio-co-uk-blog/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/cbradio-co-uk-blog/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/cbradio-co-uk-blog/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/cbradio-co-uk-blog/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Blog&body=https%3A%2F%2Fcbradio.co.uk%2Fcbradio-co-uk-blog%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/cbradio-co-uk-blog/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/cbradio-co-uk-blog/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/cbradio-co-uk-blog/?share=telegram) - --- ## JetWooBuilder Templates ### [Shop Archive](https://cbradio.co.uk/?jet-woo-builder=shop-archive) **Published:** March 4, 2020 **Author:** Jan **Content:** ## Categories - [Amateur Radio](https://cbradio.co.uk/product-category/amateur-radio/) - [Car Parts](https://cbradio.co.uk/product-category/car-parts/) - [CB Aerial Mounts and Brackets](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/) - [CB Aerials](https://cbradio.co.uk/product-category/cb-aerials/) - [CB Radio Accessories](https://cbradio.co.uk/product-category/cb-radio-accessories/) - [CB Radio Extension Speakers](https://cbradio.co.uk/product-category/extension-speakers/) - [CB radio Hand Helds](https://cbradio.co.uk/product-category/cb-radio-hand-helds/) - [CB Radio Starter Kits](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/) - [CB Radios](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/) - [Clearance](https://cbradio.co.uk/product-category/clearance/) - [Coax Cable](https://cbradio.co.uk/product-category/coax-cable/) - [Featured Products](https://cbradio.co.uk/product-category/featured-products/) - [Health and Safety](https://cbradio.co.uk/product-category/health-and-safety/) - [Hunting Accessories](https://cbradio.co.uk/product-category/hunting-accessories/) - [Linear Amplifiers](https://cbradio.co.uk/product-category/linear-amplifiers/) - [Network radio](https://cbradio.co.uk/product-category/network-radio/) - [Other](https://cbradio.co.uk/product-category/other/) - [Plugs and Connectors](https://cbradio.co.uk/product-category/plugs-and-connectors/) - [PMR 446](https://cbradio.co.uk/product-category/pmr-446/) - [Power Supplies and Inverters](https://cbradio.co.uk/product-category/power-supplies-and-inverters/) - [Rotators](https://cbradio.co.uk/product-category/rotators/) - [Scanners and Aerials](https://cbradio.co.uk/product-category/scanner-aerials/) - [SWR meters](https://cbradio.co.uk/product-category/swr-meters/) - [Taxi Aerials](https://cbradio.co.uk/product-category/taxi-aerials/) - [Tools](https://cbradio.co.uk/product-category/tools/) - [Truck Stuff](https://cbradio.co.uk/product-category/truck-stuff/) - [TV Aerials and Sattellite](https://cbradio.co.uk/product-category/tv-aerials-and-sattellite/) - [Uncategorised](https://cbradio.co.uk/product-category/uncategorised/) Select a category Amateur Radio Car Parts CB Aerial Mounts and Brackets CB Aerials CB Radio Accessories CB Radio Extension Speakers CB radio Hand Helds CB Radio Starter Kits CB Radios Clearance Coax Cable Featured Products Health and Safety Hunting Accessories Linear Amplifiers Network radio Other Plugs and Connectors PMR 446 Power Supplies and Inverters Rotators Scanners and Aerials SWR meters Taxi Aerials Tools Truck Stuff TV Aerials and Sattellite Uncategorised # Shop Archive [ ![images](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/images.webp?resize=233%2C217&ssl=1) ](https://cbradio.co.uk/product-category/amateur-radio/) ##### [Amateur Radio](https://cbradio.co.uk/product-category/amateur-radio/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/car-parts/) ##### [Car Parts](https://cbradio.co.uk/product-category/car-parts/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/) ##### [CB Aerial Mounts and Brackets](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/) [ ![57 1554](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/02/57-1554.jpg?resize=132%2C300&ssl=1) ](https://cbradio.co.uk/product-category/cb-aerials/) ##### [CB Aerials](https://cbradio.co.uk/product-category/cb-aerials/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/cb-radio-accessories/) ##### [CB Radio Accessories](https://cbradio.co.uk/product-category/cb-radio-accessories/) [ ![57 1505](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/02/57-1505.jpg?resize=300%2C300&ssl=1) ](https://cbradio.co.uk/product-category/extension-speakers/) ##### [CB Radio Extension Speakers](https://cbradio.co.uk/product-category/extension-speakers/) [ ![PNIHP82 5 2](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2023/10/PNIHP82_5_2.jpg?resize=300%2C300&ssl=1) ](https://cbradio.co.uk/product-category/cb-radio-hand-helds/) ##### [CB radio Hand Helds](https://cbradio.co.uk/product-category/cb-radio-hand-helds/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/) ##### [CB Radio Starter Kits](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/) [ ![PNI HP40 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/06/PNI-HP40_1.jpg?resize=300%2C300&ssl=1) ](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/) ##### [CB Radios](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/clearance/) ##### [Clearance](https://cbradio.co.uk/product-category/clearance/) [ ![57 1269](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/02/57-1269.jpg?resize=300%2C300&ssl=1) ](https://cbradio.co.uk/product-category/coax-cable/) ##### [Coax Cable](https://cbradio.co.uk/product-category/coax-cable/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/featured-products/) ##### [Featured Products](https://cbradio.co.uk/product-category/featured-products/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/health-and-safety/) ##### [Health and Safety](https://cbradio.co.uk/product-category/health-and-safety/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/hunting-accessories/) ##### [Hunting Accessories](https://cbradio.co.uk/product-category/hunting-accessories/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/linear-amplifiers/) ##### [Linear Amplifiers](https://cbradio.co.uk/product-category/linear-amplifiers/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/network-radio/) ##### [Network radio](https://cbradio.co.uk/product-category/network-radio/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/other/) ##### [Other](https://cbradio.co.uk/product-category/other/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/plugs-and-connectors/) ##### [Plugs and Connectors](https://cbradio.co.uk/product-category/plugs-and-connectors/) [ ![PNIHP446 2](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2023/09/PNIHP446_2.jpg?resize=300%2C300&ssl=1) ](https://cbradio.co.uk/product-category/pmr-446/) ##### [PMR 446](https://cbradio.co.uk/product-category/pmr-446/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/power-supplies-and-inverters/) ##### [Power Supplies and Inverters](https://cbradio.co.uk/product-category/power-supplies-and-inverters/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/rotators/) ##### [Rotators](https://cbradio.co.uk/product-category/rotators/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/scanner-aerials/) ##### [Scanners and Aerials](https://cbradio.co.uk/product-category/scanner-aerials/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/swr-meters/) ##### [SWR meters](https://cbradio.co.uk/product-category/swr-meters/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/taxi-aerials/) ##### [Taxi Aerials](https://cbradio.co.uk/product-category/taxi-aerials/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/tools/) ##### [Tools](https://cbradio.co.uk/product-category/tools/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/truck-stuff/) ##### [Truck Stuff](https://cbradio.co.uk/product-category/truck-stuff/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/tv-aerials-and-sattellite/) ##### [TV Aerials and Sattellite](https://cbradio.co.uk/product-category/tv-aerials-and-sattellite/) [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/plugins/elementor/assets/images/placeholder.png?ssl=1) ](https://cbradio.co.uk/product-category/uncategorised/) ##### [Uncategorised](https://cbradio.co.uk/product-category/uncategorised/) --- ### [Product Template](https://cbradio.co.uk/?jet-woo-builder=product-template) **Published:** March 4, 2020 **Author:** Jan **Content:** - [ Home ](https://cbradio.co.uk "Home") - - JetWooBuilder Templates - - **Product Template** 66 in stock [ ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/02/1-268.jpg?resize=400%2C314&ssl=1) ](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/) [RG213](https://cbradio.co.uk/product-category/coax-cable/rg213/) [rg213 15m 49 foot mil spec LOW LOSS with 2 x PL259 connectors £38.99 ](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7446) 41 in stock [ ![57 1147](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2020/02/57-1147.jpg?resize=332%2C1024&ssl=1) ](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/) [Mini Stinger](https://cbradio.co.uk/product-category/cb-aerials/mini-stingers/) [Chrome mini Springer 4×4 CB aerial stinger small Orbitor antenna £18.49 ](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7413) 23 in stock [ ![PNIMK9500 1 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/07/PNIMK9500_1_1.jpg?resize=1024%2C1024&ssl=1) ](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/) [CB Radio Microphones](https://cbradio.co.uk/product-category/cb-radio-accessories/cb-radio-microphones/) [Replacement Mic Microphone for PNI 9500 £21.99 ](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7356) 10 in stock (can be backordered) [ ![PNI HP40 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/06/PNI-HP40_1.jpg?resize=1024%2C1024&ssl=1) ](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/) [PNI](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/pni-cb-radio/) [PNI Escort HP40 Multi-Standard CB Radio £119.99 ](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7295) 5 in stock [ ![PNIDR735E 1](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/PNIDR735E_1.jpg?resize=1000%2C1000&ssl=1) ](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/) [VHF UHF Transceivers](https://cbradio.co.uk/product-category/amateur-radio/vhf-uhf-transceivers/) [Alinco DR-735E 145/433 MHz NEW Dual Band amateur radio Transceiver with DTMF Mic £354.99 ](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7248) 2 in stock [ ![at 779uv](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/at-779uv.jpg?resize=1000%2C1000&ssl=1) ](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/) [VHF UHF Transceivers](https://cbradio.co.uk/product-category/amateur-radio/vhf-uhf-transceivers/) [Anytone AT-779UV Dual Band mini mobile radio Pre Programmed £89.99 ](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7242) 5 in stock [ ![titan](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2026/05/titan.webp?resize=1024%2C855&ssl=1) ](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/) [HF Transceivers](https://cbradio.co.uk/product-category/amateur-radio/hf-transceivers/), [Moonraker](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/moonraker-cb-radio/) [Moonraker Titan 10m Multi-Mode AM FM SSB CW Transceiver £154.99 ](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/) [Add to basket](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=f2f19ba25d&add-to-cart=7229) --- ### [Product grid template](https://cbradio.co.uk/?jet-woo-builder=product-grid-template) **Published:** March 4, 2020 **Author:** Jan **Content:** --- ## Products ### [RCA Motorola to so239 adaptor moto phono adapter so-239 UHF to Motorola plug](https://cbradio.co.uk/product/rca-motorola-to-so239-adaptor-moto-phono-adapter-so-239-uhf-to-motorola-plug/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **SO239 to Motorola / RCA Phono Adaptor – UHF Female to Car Radio Aerial Plug Converter** **Simple Solution to Connect CB Antennas to Car Radios** This **SO239 (UHF female) to Motorola / RCA-style adaptor** allows you to connect a **PL259-equipped antenna lead** to a **car radio aerial input**. 👉 Ideal for **converting CB / antenna connections to standard vehicle radio inputs**. --- ### ✅ **Key Features** ✔ **SO239 (UHF Female) Input** – accepts PL259 connectors ✔ **Motorola / RCA Phono Style Output** ✔ **Compact & Durable Design** ✔ **All Metal Construction** ✔ **Quick Plug & Play Solution** --- ### 📡 **Perfect For** - Connecting CB antenna leads to car radios - Converting UHF coax to Motorola aerial input - Workshop testing & setups - DIY radio installations --- ### ⚙️ **Specifications** - Input: **SO239 (UHF Female)** - Output: **Motorola / RCA Phono Plug** - Construction: **Metal Body** - Type: **Adaptor / Converter** --- ### ⚠️ **Important Notes** ❗ The centre pin is slightly longer than standard RCA plugs 👉 If not using for Motorola applications, you **may need to trim the pin slightly** ❗ Ensure compatibility with your device before purchase --- ### 💡 **Why You Need This** Without the correct adaptor: - Connectors won’t fit - Signal cannot be transferred - Installation becomes difficult 👉 This adaptor provides a **simple and effective solution**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - PL259 connectors - Coax cable (RG58 / RG8X / RG213) - Antennas & mounts - Adaptors & radio accessories --- ### 🔥 **Order Today** **Connect it. Convert it. Get it working.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rca-motorola-to-so239-adaptor-moto-phono-adapter-so-239-uhf-to-motorola-plug/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rca-motorola-to-so239-adaptor-moto-phono-adapter-so-239-uhf-to-motorola-plug/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rca-motorola-to-so239-adaptor-moto-phono-adapter-so-239-uhf-to-motorola-plug/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rca-motorola-to-so239-adaptor-moto-phono-adapter-so-239-uhf-to-motorola-plug/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RCA%20Motorola%20to%20so239%20adaptor%20moto%20phono%20adapter%20so-239%20UHF%20to%20Motorola%20plug&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frca-motorola-to-so239-adaptor-moto-phono-adapter-so-239-uhf-to-motorola-plug%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rca-motorola-to-so239-adaptor-moto-phono-adapter-so-239-uhf-to-motorola-plug/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rca-motorola-to-so239-adaptor-moto-phono-adapter-so-239-uhf-to-motorola-plug/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rca-motorola-to-so239-adaptor-moto-phono-adapter-so-239-uhf-to-motorola-plug/?share=telegram) - **Product categories:** RF Adaptors --- ### [Heavy duty so239 boot mount Amateur or CB radio antenna 4m cable](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚗📡 **Heavy Duty SO239 Boot Mount – MB-400 Hatchback / Trunk Lip Mount – CB & Ham Antenna – 4m Cable** **Strong, Secure & Built for Performance** The **MB-400 heavy duty boot mount** is a **premium trunk lip antenna mount**, designed for **CB and amateur radio installations** where strength and reliability matter. 👉 Ideal for **hatchbacks, estates, and vehicles where drilling isn’t an option**. --- ### 💪 **Heavy Duty Build Quality** ✔ **Robust Metal Construction** – built to last ✔ **Secure Lip Mount Design** – firm grip without drilling ✔ **Designed for Larger Antennas** 👉 Suitable for antennas like: - Sirio 4000 - ATAS-120 - Other high-performance aerials --- ### ✅ **Complete Kit – Ready to Install** ✔ **MB-400 Heavy Duty Boot Mount** ✔ **4 Metres High Quality RG58 Cable** ✔ **SO239 Socket (Antenna Side)** ✔ **PL259 Plug (Radio End)** --- ### 📡 **Perfect For** - CB radio setups - Amateur (Ham) radio - Mobile installations - Vehicles without roof drilling - Temporary or semi-permanent installs --- ### 🚗 **Vehicle Compatibility** - Hatchbacks - Estates - Saloons (trunk lip) - Vans with suitable mounting edges --- ### ⚙️ **Specifications** - Model: **MB-400 Boot Mount** - Mount Type: **Trunk / Hatch Lip Mount** - Antenna Connection: **SO239 (UHF Female)** - Radio Connection: **PL259 (UHF Male)** - Cable: **Approx. 4 Metres RG58** --- ### 💡 **Why Choose This Mount** Cheaper mounts: - Flex under load - Struggle with larger antennas - Have poor cable quality 👉 This is a **proven heavy-duty mount trusted by radio users**. --- ### ⚠️ **Installation Notes** ❗ Ensure a solid mounting lip for best performance ❗ Position antenna for good ground plane ❗ Check cable routing to avoid pinching --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - Antennas & aerials - SWR meters & tuning tools - Coax cable & connectors - Alternative mounts --- ### 🔥 **Order Today** **Strong mount. Clean install. Built to perform.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Heavy%20duty%20so239%20boot%20mount%20Amateur%20or%20CB%20radio%20antenna%204m%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fheavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/heavy-duty-so239-boot-mount-amateur-or-cb-radio-antenna-4m-cable/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [AV-601 SWR Power meter 1.8-160 140-525 MHz](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📊 **AV-601 SWR & Power Meter – HF VHF UHF 1.8–525MHz – Dual Sensor – 400W PEP/RMS** **Wide Band • High Power • Professional Grade** The **AV-601 SWR Power Meter** is a **multi-band SWR & power meter** designed for **serious radio users**, covering **HF, VHF, and UHF frequencies** with **dual sensors for maximum accuracy**. 👉 Supplied as **Avair / Sharman / Moonraker branded unit depending on stock** *(all manufactured by Avair – identical performance)*. --- ### 🔥 **Why Choose the AV-601** ✔ **Massive Frequency Coverage (1.8–525 MHz)** ✔ **Dual Sensor Design (HF + VHF/UHF)** ✔ **High Power Handling up to 400W** ✔ **RMS & PEP Power Measurement** ✔ **Large Easy-Read Analogue Meter** --- ### 📡 **Full Band Coverage** ✔ **HF:** 1.8 – 160 MHz *(Sensor 1)* ✔ **VHF/UHF:** 140 – 525 MHz *(Sensor 2)* 👉 One meter for **all your radio setups**. --- ### 📊 **Measurement Capabilities** ✔ **SWR (Standing Wave Ratio)** ✔ **Power Output Levels:** - 5W - 20W - 200W - 400W ✔ **PEP (Peak Envelope Power)** ✔ **RMS (Average Power)** --- ### ⚙️ **Specifications** - Model: **AV-601** - Frequency Range: - **1.8–160 MHz (S1)** - **140–525 MHz (S2)** - Sensors: **Dual Sensor System** - Power Ranges: **5W / 20W / 200W / 400W** - Meter Type: **Analogue (Large Display)** - Illumination: **13.8V DC Lamp** - Size: **155 x 63 x 103 mm** - Weight: **720g** --- ### 💡 **Why You Need This Meter** ✔ Protect your radio from high SWR damage ✔ Tune antennas for maximum efficiency ✔ Monitor power output accurately ✔ Suitable for multiple radio types 👉 A **must-have tool for serious HF/VHF/UHF operators**. --- ### 🔧 **Key Benefits** ✔ Covers all major amateur and CB bands ✔ Dual sensors for improved accuracy ✔ Ideal for both base and mobile setups --- ### ⚠️ **Important Notes** ❗ Supplied brand may vary *(Avair / Sharman / Moonraker)* ❗ Requires **patch leads (PL259 to PL259)** ❗ Install inline between radio and antenna --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Patch leads & coax cables - Antennas & mounts - CB & Ham radios - Power supplies --- ### 🔥 **Order Today** **One meter. All bands. Total control.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20AV-601%20SWR%20Power%20meter%201.8-160%20140-525%20MHz&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Favair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/avair-av-601-swr-power-meter-1-8-160-140-525-mhz-hf-vhf-uhf/?share=telegram) - **Product categories:** SWR meters --- ### [green mini springer 4X4 cb radio aerial with 5" mag mount](https://cbradio.co.uk/product/green-mini-springer-4x4-cb-radio-aerial-with-5-mag-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** **GREEN Mini Springer and 5″ Mag mount** **If this mag doesn’t hold your aerial on the roof then NO single mag mount will!!** **Undoubtedly the most popular pre-tuned CB trucking antenna. virtually indestructible.** **The heavy duty open coil design and stainless steel whip gives this aerial that flexibility that off roaders. farmers and truckers require from this antenna.** ****Because our antennas are Quality** **British made we have a constant supply!**** **Specification:** **Mini Springer Aerial** - Base loaded spring flexible CB Aerial - Frequency: 27-28MHz - Length: 89cm - VSWR: 1.5:1 or better - Power: 1000 Watts - Fitting: Standard 3/8 thread - Made in the UK! **Turbo Magnetic Mount** - Type: 7″ magnetic mount - Fitting: 3/8 Thread - Coax: 4 Metres RG58 Approx. - Base: Protective rubber - Connection: PL259 plug - Made in the UK! ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/green-mini-springer-4x4-cb-radio-aerial-with-5-mag-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/green-mini-springer-4x4-cb-radio-aerial-with-5-mag-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/green-mini-springer-4x4-cb-radio-aerial-with-5-mag-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/green-mini-springer-4x4-cb-radio-aerial-with-5-mag-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20green%20mini%20springer%204X4%20cb%20radio%20aerial%20with%205%22%20mag%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fgreen-mini-springer-4x4-cb-radio-aerial-with-5-mag-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/green-mini-springer-4x4-cb-radio-aerial-with-5-mag-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/green-mini-springer-4x4-cb-radio-aerial-with-5-mag-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/green-mini-springer-4x4-cb-radio-aerial-with-5-mag-mount/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [35 Watt boots FM AM HF 10 meter HAM CB radio linear amplifier burner KL35](https://cbradio.co.uk/product/35-watt-boots-fm-am-hf-10-meter-ham-cb-radio-linear-amplifier-burner-kl35/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚡📡 RM Italy KL-35 Linear Amplifier – 35W CB HAM Radio Booster – AM/FM/SSB **Compact • Powerful • Easy to Use** The **RM KL-35** is a **compact linear amplifier**, designed to boost your signal on **CB and 10m amateur radio bands**. 👉 Small size, noticeable gain --- 🔥 **Why Choose This Amplifier** ✔ Boosts Signal Power Output ✔ AM / FM / SSB Compatible ✔ Compact & Easy to Install ✔ Ideal for Mobile Setups ✔ Trusted RM Italy Build Quality 👉 Get more out of your radio --- 📦 **What’s Included** ✔ RM KL-35 Linear Amplifier 👉 Ready to connect --- 📡 **Performance Highlights** Frequency Range: 25–30 MHz Input Power: - 1–5W (AM/FM) - 2–10W (SSB) Output Power: - 25–35W (AM/FM) - 50–70W (SSB) 👉 Strong boost in a compact unit --- ⚙️ **Specifications** Modes: AM / FM / SSB Power Supply: 13.8V DC Current Draw: 4A Size: 109 x 35 x 89mm --- 💡 **Why This Amplifier Stands Out** ✔ Compact but effective ✔ Simple plug-and-play operation ✔ Ideal for mobile or base setups ✔ Great entry-level amplifier 👉 Improve your transmit performance --- 🔧 **Installation** ✔ Connect between radio and aerial ✔ Power from 13.8V supply ✔ Operate as normal 👉 Quick and straightforward setup --- ⚠️ **Important Notes** ❗ **UK CB use limited to 4W (OFCOM regulations apply)** ❗ Amateur (10m) use requires valid licence ❗ **Final transistors are NOT covered by warranty** ❗ Ensure correct SWR before use to avoid damage --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: SWR meters Power supplies Coax cables Aerials --- 🔥 **Order Today** **More power. Better reach. Compact setup.** ⚡📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/35-watt-boots-fm-am-hf-10-meter-ham-cb-radio-linear-amplifier-burner-kl35/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/35-watt-boots-fm-am-hf-10-meter-ham-cb-radio-linear-amplifier-burner-kl35/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/35-watt-boots-fm-am-hf-10-meter-ham-cb-radio-linear-amplifier-burner-kl35/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/35-watt-boots-fm-am-hf-10-meter-ham-cb-radio-linear-amplifier-burner-kl35/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2035%20Watt%20boots%20FM%20AM%20HF%2010%20meter%20HAM%20CB%20radio%20linear%20amplifier%20burner%20KL35&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F35-watt-boots-fm-am-hf-10-meter-ham-cb-radio-linear-amplifier-burner-kl35%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/35-watt-boots-fm-am-hf-10-meter-ham-cb-radio-linear-amplifier-burner-kl35/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/35-watt-boots-fm-am-hf-10-meter-ham-cb-radio-linear-amplifier-burner-kl35/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/35-watt-boots-fm-am-hf-10-meter-ham-cb-radio-linear-amplifier-burner-kl35/?share=telegram) - **Product categories:** Linear Amplifiers --- ### [3/8 thread antenna swivel mount fold down adaptor adjustable angle](https://cbradio.co.uk/product/3-8-thread-antenna-swivel-mount-fold-down-adaptor-adjustable-angle-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **3/8 Thread Antenna Swivel Mount – Adjustable Fold Down Adaptor – CB Radio Aerial Angle Mount** **Keep Your Aerial Upright – Perfect Alignment Every Time** This **3/8 thread swivel mount adaptor** is the ideal solution for mounting your antenna on **sloping surfaces**, ensuring your aerial remains **upright for maximum performance**. Also features a **fold-down design**, making it perfect for **low height restrictions such as car parks, garages, and off-road use**. --- ### ✅ **Key Features** ✔ **Adjustable Angle Design** – corrects sloping mounts ✔ **Fold Down Function** – easily lower your aerial when needed ✔ **Standard 3/8 Thread Compatibility** – fits most CB antennas ✔ **Strong & Durable Construction** ✔ **Supplied with Allen Key** – quick and easy adjustment --- ### 📡 **Why You Need This** If your mount is on: - A **sloped surface (bull bar, mirror arm, etc.)** - A **non-level bracket** 👉 Your aerial will lean, reducing performance and range. This adaptor ensures: ✔ Correct vertical alignment ✔ Improved signal performance ✔ Cleaner, professional installation --- ### 🚜 **Perfect For** - 4×4 & Off-Road Vehicles - Trucks / HGVs - Bull Bars & Mirror Mounts - Agricultural Vehicles - Custom Installations --- ### ⚙️ **Specifications** - Thread Type: **3/8” Standard CB Thread** - Function: **Adjustable Angle + Fold Down** - Compatibility: **All 3/8 Thread Antennas** - Adjustment Tool: **Allen Key (Included)** --- ### ⚠️ **Why Proper Alignment Matters** A poorly aligned antenna can: - Reduce transmit range - Affect SWR performance - Impact overall signal quality 👉 This adaptor helps ensure **optimal antenna performance**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - Springer & whip antennas - Mounts & brackets - Coax cable & connectors - SWR meters & tuning tools --- ### 🔥 **Order Today** **Straight aerial. Better signal. No compromise.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-8-thread-antenna-swivel-mount-fold-down-adaptor-adjustable-angle-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-8-thread-antenna-swivel-mount-fold-down-adaptor-adjustable-angle-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-8-thread-antenna-swivel-mount-fold-down-adaptor-adjustable-angle-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-8-thread-antenna-swivel-mount-fold-down-adaptor-adjustable-angle-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%2F8%20thread%20antenna%20swivel%20mount%20fold%20down%20adaptor%20adjustable%20angle&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-8-thread-antenna-swivel-mount-fold-down-adaptor-adjustable-angle-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-8-thread-antenna-swivel-mount-fold-down-adaptor-adjustable-angle-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-8-thread-antenna-swivel-mount-fold-down-adaptor-adjustable-angle-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-8-thread-antenna-swivel-mount-fold-down-adaptor-adjustable-angle-mount/?share=telegram) - **Product categories:** CB radio Accessories --- ### [50 cm Patch Lead RG58U mil spec Coax PL259 Quality Plugs](https://cbradio.co.uk/product/50-cm-patch-lead-rg58u-mil-spec-coax-pl259-quality-plugs/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG58 50cm Patch Lead (PL259 to PL259)** is a **high-quality, low-loss jumper lead**, custom made using **mil-spec RG58 cable and quality PL259 connectors**. Perfect for **short interconnections** where flexibility and neat installs are key. --- ## 📏 Compact 50cm Length ✔ Ideal for short connections ✔ Keeps installs tidy ✔ Reduces excess cable clutter Perfect for: - Radio ↔ SWR meter - Radio ↔ amplifier - Equipment interconnects --- ## 📡 Reliable RG58 Performance ✔ 50 Ohm impedance ✔ Mil-spec construction ✔ Suitable for HF, VHF & UHF --- ## 🔧 Custom Made Quality ✔ Built using quality materials ✔ Properly assembled connectors ✔ Designed for reliability --- ## 🔌 PL259 to PL259 ✔ Standard connectors for CB & ham gear ✔ Secure and easy connection ✔ Widely compatible --- ## 💪 Flexible & Easy to Use ✔ Slim, flexible RG58 cable ✔ Easy to route in tight spaces ✔ Ideal for mobile or base setups --- ## ⚠️ Important Note ✔ **Listing is for the 50cm patch lead only** ✔ Any additional cable shown in images is **for demonstration purposes only** (Yes… we’ve been asked 😄) --- ## Key Features - 50cm RG58 coax patch lead - PL259 to PL259 - Mil-spec cable - Flexible and compact - Custom made --- ## Why Choose This Lead? ✔ Neat and tidy installs ✔ Reliable everyday performance ✔ Quality components used ✔ Ideal short jumper length --- ## Ideal For - CB radio setups - Amateur radio use - SWR meter connections - Compact installations --- ## Straight Talking Short, simple, and does the job properly — exactly what a patch lead should be. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/50-cm-patch-lead-rg58u-mil-spec-coax-pl259-quality-plugs/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/50-cm-patch-lead-rg58u-mil-spec-coax-pl259-quality-plugs/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/50-cm-patch-lead-rg58u-mil-spec-coax-pl259-quality-plugs/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/50-cm-patch-lead-rg58u-mil-spec-coax-pl259-quality-plugs/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2050%20cm%20Patch%20Lead%20RG58U%20mil%20spec%20Coax%20PL259%20Quality%20Plugs&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F50-cm-patch-lead-rg58u-mil-spec-coax-pl259-quality-plugs%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/50-cm-patch-lead-rg58u-mil-spec-coax-pl259-quality-plugs/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/50-cm-patch-lead-rg58u-mil-spec-coax-pl259-quality-plugs/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/50-cm-patch-lead-rg58u-mil-spec-coax-pl259-quality-plugs/?share=telegram) - **Product categories:** Patch Leads --- ### [Replacement Mic Microphone for PNI 9500](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/) **Published:** July 7, 2026 **Author:** Jan **Content:** # Replacement 6 Pin CB Microphone for PNI HP9500 HP8900 Thunderpole T-800 T-2000 T-3000 ## 🎤 Genuine Style Replacement Mic – 6 Pin Electret High quality **replacement CB radio microphone** compatible with multiple **PNI Escort** and **Thunderpole** CB radios. Perfect solution if your original mic is damaged, crackling, intermittent or lost. --- ## ✅ Compatible With: **PNI Escort Models:** - HP 9500 - HP 8900 - HP 8000L - HP 8001L - HP 8024 - HP 9001 - HP 9001 Pro **Thunderpole Models:** - T-800 - T-2000 - T-3000 (6-Pin Version Only – Please Check Before Ordering) --- ## 🔊 Electret Condenser Microphone ✔ Clear, strong modulation ✔ Built-in speaker ✔ Durable coiled cable ✔ Professional feel Ideal for mobile CB users, truckers, 4×4 drivers and agricultural vehicles. --- ## 🎚 Integrated Controls - Channel UP / DOWN buttons - ASQ On / Off button - Adjustable ASQ sensitivity (model dependent) Quick channel navigation without touching the radio. --- ## 📌 Specifications - Type: Electret microphone - Pins: 6 Pin - Cable Length: 60cm coiled - Colour: Black - Size: 60 x 30 x 110 mm - Operating Temp: -26°C to +60°C Product Code: **PNI-MK9500** --- ## 🔧 Why Replace Your Mic? Common signs you need a new microphone: - No transmit audio - Crackling sound - Stuck PTT - Broken cable - Loose pins A new mic often restores full performance instantly. --- ## 📦 What You Receive 1 x 6 Pin Replacement CB Microphone --- ### 🚛 Ideal For Truck drivers 4×4 off-road Agricultural vehicles Taxi installations Professional drivers ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Replacement%20Mic%20Microphone%20for%20PNI%209500&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Freplacement-mic-microphone-for-pni-9500%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/replacement-mic-microphone-for-pni-9500/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [CB Radio antenna PNI ML145 145 cm](https://cbradio.co.uk/product/cb-pni-antenna-by-sirio-ml145-with-pl-thread-length-145-cm/) **Published:** February 23, 2023 **Author:** Jan **Content:** The **PNI ML145 CB Antenna Kit** is a complete, high-performance solution built around the legendary **Sirio ML145 antenna** — one of the most trusted mobile CB antennas available. With a **1.45m whip, strong 145mm magnetic base and Italian build quality**, this kit delivers **excellent range, stability and reliability** straight out of the box. --- ## 🇮🇹 Made by Sirio – Trusted Quality - Manufactured in Italy by **Sirio Antenne** - Known worldwide for quality since 1972 - Durable construction with **chromed copper whip** Built to last and perform. --- ## 📡 Strong Performance & Range ✔ Frequency range: **27 – 28.5 MHz** ✔ Up to **~15 km range** (ideal conditions) ✔ Low SWR: **< 1.2:1** ✔ Handles up to **900W (short duration)** A proven antenna for serious CB users. --- ## 🚗 Complete Ready-to-Install Kit Includes everything you need: - ML145 antenna (1.45m) - **145mm magnetic base** - **4m RG58 coax cable** - **PL259 connector fitted** - Rubber protective base pad ✔ Quick installation — no drilling required --- ## 🧲 Strong Magnetic Mount - Large **145mm base** for maximum stability - Strong grip even at high speeds - Rubber pad protects vehicle paint - Internal sealing protects connections from water --- ## ⚙️ Flexible Installation Options - Standard **PL-type (Ø16mm thread)** - Compatible with magnetic bases and fixed mounts - Can be installed on boot mounts, mirror mounts or brackets --- ## Key Features - 1.45m high-performance CB antenna - Made in Italy by Sirio - Magnetic base included (145mm) - 4m RG58 cable with PL259 - Low SWR for efficient operation - Durable, weather-resistant construction --- ## Technical Specifications - **Frequency Range:** 27 – 28.5 MHz - **Length:** 145 cm - **Impedance:** 50 Ohms - **Maximum Power:** 900W (short duration) - **SWR:** < 1.2:1 - **Polarisation:** Vertical - **Cable Length:** 4 metres - **Mount:** Magnetic base (145 mm) --- ## Why Choose the ML145 Kit? ✔ One of the most popular CB antennas ever made ✔ Excellent balance of **range and practicality** ✔ Strong magnetic base for stability ✔ Complete plug-and-play solution --- ## Ideal For - Cars, vans and trucks - Regular CB users - Drivers wanting improved range - Motorway and long-distance communication --- ## Straight Talking If you want a **proper CB antenna that performs without going over the top in size**, the ML145 is one of the safest bets you can make. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-pni-antenna-by-sirio-ml145-with-pl-thread-length-145-cm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-pni-antenna-by-sirio-ml145-with-pl-thread-length-145-cm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-pni-antenna-by-sirio-ml145-with-pl-thread-length-145-cm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-pni-antenna-by-sirio-ml145-with-pl-thread-length-145-cm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20antenna%20PNI%20ML145%20145%20cm&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-pni-antenna-by-sirio-ml145-with-pl-thread-length-145-cm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-pni-antenna-by-sirio-ml145-with-pl-thread-length-145-cm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-pni-antenna-by-sirio-ml145-with-pl-thread-length-145-cm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-pni-antenna-by-sirio-ml145-with-pl-thread-length-145-cm/?share=telegram) - **Product categories:** PNI CB Antennas --- ### [2" X 2" Heavy Duty Mast Clamp 8 Nut authentic Shelley TV Aerial, CB or Ham Radio](https://cbradio.co.uk/product/2-x-2-heavy-duty-mast-clamp-8-nut-authentic-shelley-tv-aerial-cb-or-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **2″ x 2″ Heavy Duty Mast Clamp – Genuine Shelley 8 Nut – TV / CB / Ham Aerial Mount** **Professional Grade Clamp – Strong, Reliable & Built to Last** This **genuine Shelley 8-nut mast clamp** is a **heavy-duty galvanised steel bracket**, designed to securely clamp **two poles up to 2” diameter**. 👉 Ideal for **TV aerials, CB antennas, and amateur radio installations** where strength and stability are essential. --- ### ✅ **Why Choose a Genuine Shelley Clamp** ✔ **Authentic Shelley Product** – trusted quality ✔ **Heavy Duty 8-Nut Design** – maximum clamping strength ✔ **Galvanised Steel Construction** – corrosion resistant ✔ **Secure & Stable Mounting** ✔ **Suitable for Vertical or Right Angle Mounting** --- ### 📡 **Perfect For** - CB Radio Antennas - Amateur (Ham) Radio Installations - TV Aerials - Base Station Setups - Antron 99 Replacement Clamp --- ### ⚙️ **Versatile Mounting Options** - Clamp **two masts at right angles** - Or **join two vertical poles together** 👉 Flexible for a wide range of installations. --- ### ⚙️ **Technical Specifications** - Type: **8 Nut Mast Clamp** - Brand: **Genuine Shelley** - Material: **Galvanised Steel** - Pole Capacity: **Up to 2” Diameter** - Dimensions: **130mm x 90mm x 70mm** - Fixings: **13mm Locking Nuts** - Contents: **1 x Clamp** --- ### 💪 **Built for Strength** - Designed for **heavy antennas and harsh weather** - Stronger and more secure than standard clamps - Ideal for **permanent outdoor installations** --- ### ⚠️ **Why Quality Matters** Cheap clamps: - Rust quickly - Loosen over time - Fail under load 👉 This genuine Shelley clamp provides **long-term reliability and peace of mind**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Base station antennas - Coax cable & connectors - Mounts & brackets - SWR meters & accessories --- ### 🔥 **Order Today** **Strong clamp. Secure install. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-x-2-heavy-duty-mast-clamp-8-nut-authentic-shelley-tv-aerial-cb-or-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-x-2-heavy-duty-mast-clamp-8-nut-authentic-shelley-tv-aerial-cb-or-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-x-2-heavy-duty-mast-clamp-8-nut-authentic-shelley-tv-aerial-cb-or-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-x-2-heavy-duty-mast-clamp-8-nut-authentic-shelley-tv-aerial-cb-or-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%22%20X%202%22%20Heavy%20Duty%20Mast%20Clamp%208%20Nut%20authentic%20Shelley%20TV%20Aerial%2C%20CB%20or%20Ham%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-x-2-heavy-duty-mast-clamp-8-nut-authentic-shelley-tv-aerial-cb-or-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-x-2-heavy-duty-mast-clamp-8-nut-authentic-shelley-tv-aerial-cb-or-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-x-2-heavy-duty-mast-clamp-8-nut-authentic-shelley-tv-aerial-cb-or-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-x-2-heavy-duty-mast-clamp-8-nut-authentic-shelley-tv-aerial-cb-or-ham-radio/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets, Installation aid --- ### [centre loaded black mini cb radio aerial](https://cbradio.co.uk/product/centre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini Stinger Centre Loaded CB Antenna** is a **proven heavy-duty antenna** designed to deliver **better performance than standard base-loaded mini stingers**. With its **elevated centre coil design**, it offers **improved signal efficiency and range**, while maintaining the rugged durability that Stinger antennas are known for. --- ## 📡 Improved Performance Design ✔ **Centre-loaded coil** (higher efficiency than base-loaded) ✔ Better radiation pattern ✔ Improved range and signal quality --- ## 💪 Built to Last - Heavy-duty **solid spring steel coil section** - Flexible stainless steel whip - Designed for tough environments ✔ Trusted by users for years --- ## 🚜 Ideal for Tough Environments Perfect for: - Truck drivers - Farmers - 4×4 and off-road vehicles ✔ Handles vibration, branches and harsh use --- ## 📏 Practical Size - Length: **100 cm (1 metre)** - Good balance between **performance and durability** - Suitable for everyday mobile use --- ## 🔌 Standard 3/8″ Mount - **3/8 UNF fitting** - Compatible with most mounts (mag, mirror, body, beehive) - Easy installation --- ## ⚡ High Power Handling - Up to **1000 Watts** - Suitable for both standard and higher power setups --- ## ⚙️ Proven, Reliable Design - Long-standing design still popular today - Known for **consistent performance and durability** - A true workhorse antenna --- ## Key Features - Centre-loaded CB antenna - Heavy-duty spring steel coil - Stainless steel whip - 3/8″ fitting - Black finish - High performance mobile antenna --- ## Technical Specifications - **Frequency:** 26–28 MHz - **Length:** 100 cm - **Coil Length:** 150 mm - **Coil Diameter:** 45 mm - **Impedance:** 50 Ohm - **SWR:** approx. 1.5:1 - **Power Handling:** 1000W - **Mount:** 3/8 UNF --- ## Why Choose Centre Loaded? ✔ Better performance than base-loaded antennas ✔ Improved signal efficiency ✔ Ideal upgrade from mini springers --- ## Ideal For - Mobile CB setups - Trucks and vans - Off-road vehicles - Users wanting better range without huge antennas --- ## Straight Talking If you want something **tough like a springer but with better performance**, this is a smart upgrade. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/centre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/centre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/centre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/centre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20centre%20loaded%20black%20mini%20cb%20radio%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcentre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/centre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/centre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/centre-loaded-black-mini-cb-radio-aerial-stinger-springer-100cm-antenna/?share=telegram) - **Product categories:** Mini Stinger --- ### [Metal Gutter Mount Clamp 4m cable 3/8 CB radio Aerial Land Rover Tractor 4X4](https://cbradio.co.uk/product/metal-gutter-mount-clamp-4m-cable-3-8-cb-radio-aerial-land-rover-tractor-4x4/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚛 **Flat Bar Mirror / Roof Rack Mount – 3/8 Stud – CB Aerial Bracket – 4m Cable** **Strong, Simple & Reliable Mounting Solution** This **heavy-duty flat bar mirror / roof rack mount** is designed to securely hold your **CB aerial**, making it ideal for **trucks, vans, 4x4s, and commercial vehicles**. 👉 A solid, dependable option for everyday use. --- ### ✅ **Key Features** ✔ **3/8 x 24 Stud Mount** – fits most CB antennas ✔ **Approx. 4 Metres RG58 Cable Included** ✔ **PL259 Connector (Radio End)** ✔ **Heavy Duty Metal Construction** ✔ **Simple & Secure Installation** --- ### 💪 **Durable Design** ✔ **Single Groove Clamp** – strong grip on flat surfaces ✔ **2 Bolt Fixing System** – secure and stable ✔ Built for **daily use and tough environments** --- ### 🚛 **Perfect For** - Trucks / HGVs - Vans & commercial vehicles - 4×4 & off-road vehicles - Roof racks & mirror arms - Light bar mounting points --- ### 📡 **Compatible With** - Springer antennas - Stinger aerials - Whip antennas - Most **3/8 thread CB aerials** --- ### ⚙️ **Specifications** - Mount Type: **Flat Bar Mirror / Roof Rack Mount** - Fitting: **3/8 x 24 Stud** - Cable: **Approx. 4 Metres RG58** - Connector: **PL259 (Radio End)** - Fixing: **2 Bolt Clamp System** --- ### ⚠️ **Why Choose This Mount** Cheaper mounts: - Flex under load - Loosen over time - Offer poor support 👉 This is a **reliable, heavy-duty mounting solution built for real use**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB aerials (Mini & XL Springers) - SWR meters & tuning tools - Coax cable & connectors - Alternative heavy-duty mounts --- ### 🔥 **Order Today** **Simple fit. Strong hold. Ready for the road.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/metal-gutter-mount-clamp-4m-cable-3-8-cb-radio-aerial-land-rover-tractor-4x4/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/metal-gutter-mount-clamp-4m-cable-3-8-cb-radio-aerial-land-rover-tractor-4x4/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/metal-gutter-mount-clamp-4m-cable-3-8-cb-radio-aerial-land-rover-tractor-4x4/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/metal-gutter-mount-clamp-4m-cable-3-8-cb-radio-aerial-land-rover-tractor-4x4/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Metal%20Gutter%20Mount%20Clamp%204m%20cable%203%2F8%20CB%20radio%20Aerial%20Land%20Rover%20Tractor%204X4&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmetal-gutter-mount-clamp-4m-cable-3-8-cb-radio-aerial-land-rover-tractor-4x4%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/metal-gutter-mount-clamp-4m-cable-3-8-cb-radio-aerial-land-rover-tractor-4x4/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/metal-gutter-mount-clamp-4m-cable-3-8-cb-radio-aerial-land-rover-tractor-4x4/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/metal-gutter-mount-clamp-4m-cable-3-8-cb-radio-aerial-land-rover-tractor-4x4/?share=telegram) - **Product categories:** Gutter Mounts --- ### [Black Large Springer Orbitor 1.55m CB Radio Antenna Aerial Omni Directional](https://cbradio.co.uk/product/large-black-springer-orbitor-1-55m-cb-radio-antenna-aerial-omni-directional/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Large Black Springer Orbitor CB Antenna** is a **full-size, heavy-duty 5ft aerial**, built for **maximum performance, flexibility, and durability**. A long-time favourite with **truckers, off-roaders, and farmers**, this antenna delivers **strong signal performance with a virtually indestructible design**. --- ## 📡 Full Size Performance ✔ Length: **1.55m (5ft)** ✔ Improved transmit and receive range ✔ Ideal for long-distance communication --- ## 💪 Heavy Duty Springer Design - Open coil base (150mm length) - Coil diameter: 50mm - Flexible under impact ✔ Handles vibration, knocks and rough terrain --- ## 🔩 Base Loaded 1/4 Wave Design ✔ Efficient radiation ✔ Full **27–28 MHz coverage** ✔ Stable and consistent performance --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Suitable for standard and high-power setups --- ## 🛠 Built for Real-World Use Perfect for: - Trucks and lorries - 4×4 and off-road vehicles - Agricultural machinery - Work vans ✔ Built to take abuse --- ## 🔧 Stainless Steel Whip ✔ **17/7 PH stainless steel whip** ✔ Strong, flexible and corrosion resistant --- ## 🎯 Pre-Tuned Convenience ✔ Pre-set for CB frequencies ✔ Minimal tuning required ✔ Quick and easy install --- ## 🔩 Standard 3/8″ Fitment ✔ **3/8 UNF thread** ✔ Fits most CB antenna mounts ✔ Compatible with mirror, gutter, and body mounts --- ## 📶 Omni-Directional Coverage ✔ 360° signal pattern ✔ No need to adjust direction ✔ Ideal for mobile use --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 1.55m - **Power:** 1000W - **SWR:** ≤ 1.5:1 - **Impedance:** 50 Ohm - **Coil Length:** 150mm - **Coil Diameter:** 50mm - **Fitting:** 3/8 UNF --- ## Key Features - Full-size 5ft CB antenna - Heavy duty springer design - Stainless steel whip - High power handling - 3/8 mount compatibility --- ## Why Choose This Antenna? ✔ Proven performance ✔ Tough and flexible ✔ Easy to install ✔ Built to last --- ## Ideal For - Truck drivers - Off-road enthusiasts - Farmers - Everyday CB users --- ## Straight Talking If you want a **proper full-size CB aerial that just works and won’t break**, this is it. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-black-springer-orbitor-1-55m-cb-radio-antenna-aerial-omni-directional/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-black-springer-orbitor-1-55m-cb-radio-antenna-aerial-omni-directional/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-black-springer-orbitor-1-55m-cb-radio-antenna-aerial-omni-directional/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-black-springer-orbitor-1-55m-cb-radio-antenna-aerial-omni-directional/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Black%20Large%20Springer%20Orbitor%201.55m%20CB%20Radio%20Antenna%20Aerial%20Omni%20Directional&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-black-springer-orbitor-1-55m-cb-radio-antenna-aerial-omni-directional%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-black-springer-orbitor-1-55m-cb-radio-antenna-aerial-omni-directional/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-black-springer-orbitor-1-55m-cb-radio-antenna-aerial-omni-directional/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-black-springer-orbitor-1-55m-cb-radio-antenna-aerial-omni-directional/?share=telegram) - **Product categories:** Long Stingers --- ### [PNI Escort HP 6500 UK EU ultra compact](https://cbradio.co.uk/product/crt-millenium-am-fm-uk-european-norms-ultra-compact-80-channel-mobile-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=RtS0mMv7Kzc[/embed] **Content:** ## 📡🚗 **PNI HP 6500 Ultra Compact CB Radio – Multi-Standard EU/UK – Detachable Mic – 4W AM/FM** **Ultra Compact • Feature Packed • Perfect for Modern Vehicles** The **PNI HP 6500 CB Radio** is a **next-generation compact CB radio**, designed for **tight installs without sacrificing features**. 👉 Ideal for **cars, vans, trucks, and discreet installations**. --- ### 🔥 **Why This Radio Stands Out** ✔ **Ultra Compact Design** – fits almost anywhere ✔ **Detachable Microphone** – cleaner install & flexibility ✔ **Quick Disconnect Bracket** – easy removal ✔ **Multi-Standard EU/UK Bands** ✔ **Modern Features in a Small Package** --- ### ✅ **Key Features** ✔ **40 UK + 40 EU Channels** ✔ **AM / FM Modes (4W Output)** ✔ **Manual & Auto Squelch (ASQ)** ✔ **RF Gain Control** ✔ **Scan Function (Auto Channel Search)** ✔ **Instant Channel 9 / 19 Access** ✔ **Keypad Lock Function** ✔ **External Speaker Jack (3.5mm)** ✔ **Blue LCD Display** --- ### 🎤 **Detachable Mic Advantage** Unlike fixed mic radios: 👉 Cleaner dash install 👉 Easier storage when not in use 👉 Reduced cable clutter --- ### 📡 **Perfect For** - Cars with limited space - Vans & commercial vehicles - Trucks / HGVs - 4×4 & off-road builds - Discreet CB setups --- ### ⚙️ **Technical Specifications** - Model: **PNI HP 6500** - Channels: **40 UK / 40 EU** - Modes: **AM / FM** - Power Output: **4W AM / 4W FM** - S-Meter: **Yes** - Squelch: **Manual + ASQ (Auto)** - RF Gain: **Adjustable** - Scan: **Yes** - Display: **Blue LCD** - External Speaker: **3.5mm Jack** - Size: **120 x 110 x 27 mm** - Weight: **470g** --- ### 💡 **Why Choose the HP 6500** Compared to older CB radios: - Smaller & easier to install - More modern features - Better usability in daily driving 👉 A **perfect blend of size, performance, and convenience**. --- ### ⚠️ **Important Notes** ❗ Requires suitable antenna & installation ❗ Ensure correct setup for best performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB antennas & mounts - Coax cable & connectors - SWR meters & tuning tools - Complete CB kits --- ### 🔥 **Order Today** **Small size. Big performance. Built for modern installs.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/crt-millenium-am-fm-uk-european-norms-ultra-compact-80-channel-mobile-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/crt-millenium-am-fm-uk-european-norms-ultra-compact-80-channel-mobile-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/crt-millenium-am-fm-uk-european-norms-ultra-compact-80-channel-mobile-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/crt-millenium-am-fm-uk-european-norms-ultra-compact-80-channel-mobile-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%206500%20UK%20EU%20ultra%20compact&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcrt-millenium-am-fm-uk-european-norms-ultra-compact-80-channel-mobile-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/crt-millenium-am-fm-uk-european-norms-ultra-compact-80-channel-mobile-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/crt-millenium-am-fm-uk-european-norms-ultra-compact-80-channel-mobile-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/crt-millenium-am-fm-uk-european-norms-ultra-compact-80-channel-mobile-cb-radio/?share=telegram) - **Product categories:** PNI --- ### [Low Profile CB Aerial Mag Mount PNI S75](https://cbradio.co.uk/product/low-profile-cb-aerial-mag-mount-antenna-125mm-pni-s75/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PNI S75 Low Profile CB Antenna** is a **compact, high-quality magnetic mount antenna** designed for drivers who want **good performance without a large, obvious aerial**. With its **low profile design and strong magnetic base**, it’s ideal for **everyday use, discreet installs and urban driving**. --- ## 🚗 Low Profile & Discreet ✔ Only **70cm tall** ✔ Subtle appearance on vehicle roof ✔ Perfect for cars, vans and daily drivers --- ## 💪 Strong Magnetic Mount - Large **145mm magnetic base** - Excellent grip at speed - Stable and secure installation ✔ Confidence even on motorways --- ## 📡 Reliable Performance - Frequency: **26–28 MHz** - **SWR < 1.2:1** - Clean and efficient transmission ✔ Well-balanced performance for its size --- ## ⚡ Solid Power Handling - Up to **250W continuous** - Suitable for standard and moderate setups --- ## 🔌 Ready to Use - **4m RG58 coax cable** included - Pre-fitted **PL259 connector** - Quick plug-and-play installation --- ## 🛠 Quality Construction - Stainless steel whip - Durable materials - Built for long-term use ✔ Comparable to well-known Italian brands --- ## Key Features - Low profile CB antenna - Magnetic mount (145mm) - 70cm length - RG58 cable (4m) - PL259 connector - Stainless steel construction --- ## Technical Specifications - **Frequency:** 26–28 MHz - **SWR:** < 1.2:1 - **Power Handling:** 250W - **Impedance:** 50 Ohm - **Polarisation:** Vertical - **Length:** 70 cm - **Cable:** RG58 (4m) - **Connector:** PL259 --- ## Why Choose the S75? ✔ Discreet and tidy install ✔ Strong magnetic base ✔ Good performance for size ✔ Easy to fit and remove --- ## Ideal For - Daily drivers - Cars and vans - Urban environments - Users wanting subtle setups --- ## Straight Talking If you want a **small antenna that still performs properly without sticking out like a flagpole**, this is a great choice. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/low-profile-cb-aerial-mag-mount-antenna-125mm-pni-s75/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/low-profile-cb-aerial-mag-mount-antenna-125mm-pni-s75/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/low-profile-cb-aerial-mag-mount-antenna-125mm-pni-s75/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/low-profile-cb-aerial-mag-mount-antenna-125mm-pni-s75/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Low%20Profile%20CB%20Aerial%20Mag%20Mount%20PNI%20S75&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flow-profile-cb-aerial-mag-mount-antenna-125mm-pni-s75%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/low-profile-cb-aerial-mag-mount-antenna-125mm-pni-s75/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/low-profile-cb-aerial-mag-mount-antenna-125mm-pni-s75/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/low-profile-cb-aerial-mag-mount-antenna-125mm-pni-s75/?share=telegram) - **Product categories:** CB Aerials with mount, PNI CB Antennas --- ### [Power and Second Gear Take off Switch LANDCRUISER AMAZON (100 SERIES)](https://cbradio.co.uk/product/power-and-second-gear-take-off-switch-landcruiser-amazon-100-series/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔘 **Toyota Land Cruiser Amazon 100 Series Power & 2nd Gear Switch – OEM – 1998 V8** **Genuine Replacement Switch – Tested & Working** Original **Power Mode & Second Gear (2nd Start) Switch** removed from a **1998 Toyota Land Cruiser Amazon 4.7 V8 (100 Series)**. Fully **tested and in working order**, ideal for replacing faulty or worn switches. --- ### ✅ **Key Features** ✔ **Genuine Toyota OEM Part** ✔ **Power Mode & 2nd Gear (2nd Start) Function** ✔ **Direct Replacement Fit** ✔ **Removed from Running Vehicle** ✔ **Tested & Fully Working** --- ### 🚙 **Vehicle Compatibility** - **Toyota Land Cruiser Amazon (100 Series)** - Suitable for **petrol V8 models (4.7L)** 👉 May also fit other 100 Series models – please check part number or match visually. --- ### ⚙️ **Function Overview** - **Power Mode** – improves throttle response and gearbox shift behaviour - **2nd Gear Start** – reduces wheel spin in slippery conditions (snow, mud, ice) --- ### 📦 **Condition** - Used item - Good working condition - May show minor cosmetic wear consistent with age 👉 Please study photos carefully to confirm condition and compatibility. --- ### ⚠️ **Important Notes** - Ensure compatibility before purchase - Professional installation recommended if unsure - This is a **used OEM part**, not aftermarket --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Land Cruiser Parts Available** 👉 Check our other listings for: - Switches & interior parts - Electrical components - 4×4 accessories - CB & vehicle electronics --- ### 🔥 **Order Today** **Restore full functionality – genuine parts you can trust.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/power-and-second-gear-take-off-switch-landcruiser-amazon-100-series/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/power-and-second-gear-take-off-switch-landcruiser-amazon-100-series/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/power-and-second-gear-take-off-switch-landcruiser-amazon-100-series/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/power-and-second-gear-take-off-switch-landcruiser-amazon-100-series/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Power%20and%20Second%20Gear%20Take%20off%20Switch%20LANDCRUISER%20AMAZON%20%28100%20SERIES%29&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpower-and-second-gear-take-off-switch-landcruiser-amazon-100-series%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/power-and-second-gear-take-off-switch-landcruiser-amazon-100-series/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/power-and-second-gear-take-off-switch-landcruiser-amazon-100-series/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/power-and-second-gear-take-off-switch-landcruiser-amazon-100-series/?share=telegram) - **Product categories:** Land Cruiser --- ### [rg213 15m 49 foot mil spec LOW LOSS with 2 x PL259 connectors](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/) **Published:** August 10, 2026 **Author:** Jan **Content:** The **RG213 15m Coax Cable with PL259 Connectors** is a **high-quality mil-spec low loss coax**, built for **maximum performance and high-power applications**. With its **thick construction and heavy copper braid**, RG213 is the go-to choice when you need **minimal signal loss and maximum durability**. --- ## 📡 Low Loss Performance ✔ Designed for **minimal signal loss** ✔ Ideal for **longer cable runs** ✔ Excellent performance across HF, VHF & UHF --- ## ⚡ Built for High Power ✔ Suitable for **high power transmission** ✔ Handles demanding radio setups ✔ Ideal for base stations and amplifiers --- ## 🔧 Heavy Duty Construction ✔ **7 x 0.72mm copper core** ✔ **95–98% copper braid shielding** ✔ Thick outer diameter (**~9.65mm**) ✔ Strong, durable and reliable --- ## 🔌 Ready to Use ✔ **15 metre (49ft) length** ✔ **2 x PL259 connectors included** ✔ One plug pre-soldered for convenience ➡️ Easy installation through walls or conduits --- ## 📻 Multi-Use Applications Perfect for: - CB radio - Amateur (ham) radio - Taxi / commercial antennas - High power installations --- ## 📶 Excellent Shielding ✔ High braid coverage reduces interference ✔ Cleaner signal transmission ✔ Reliable in noisy environments --- ## ⚙️ Technical Specifications - **Length:** 15m (49ft) - **Impedance:** 50 Ohm - **Core:** 7 x 0.72mm - **Braid:** 95–98% copper - **Outer Diameter:** ~9.65mm - **Loss (@100MHz):** ~0.7 dB per 10m - **Colour:** Black --- ## 💪 Built for Serious Installations ✔ Ideal for fixed base stations ✔ Suitable for outdoor use ✔ Handles demanding setups --- ## Key Features - RG213 mil-spec coax - 15m length - Low loss design - 2 x PL259 connectors - High power capable --- ## Why Choose RG213? ✔ Lower loss than RG58 ✔ Better for high power ✔ Stronger and more durable ✔ Professional-grade cable --- ## Ideal For - Base station setups - High power CB users - Amateur radio operators - Permanent installations --- ## Straight Talking If you want **proper performance and don’t mind thicker cable**, RG213 is the right choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg213%2015m%2049%20foot%20mil%20spec%20LOW%20LOSS%20with%202%20x%20PL259%20connectors&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg213-15m-49-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=telegram) - **Product categories:** RG213 --- ### [GAP-F 5/8 Wave Vertical Silver Rod type Home-Base CB Aerial](https://cbradio.co.uk/product/gap-f-5-8-wave-vertical-silver-rod-type-home-base-cb-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🏠 **5/8 Wave Silver Rod CB Base Antenna – 6.4m (21ft) – 26–28MHz – High Gain 1000W** **The Classic Base Station Antenna – Proven Performance** The **5/8 Wave “Silver Rod” CB Antenna** is one of the **most popular base station aerials**, trusted for its **excellent range, reliability, and simple setup**. 👉 Ideal for **home base stations** and serious CB users wanting **maximum performance**. --- ### ✅ **Why This Antenna is So Popular** ✔ **5/8 Wave Design** – improved ground wave performance ✔ **High Gain (4.2 dB)** – better transmit & receive range ✔ **Wide Bandwidth (2000 kHz)** – covers full CB band ✔ **Aluminium Construction** – corrosion resistant & lightweight ✔ **Handles Up To 1000W Power** --- ### 📡 **Performance You Can Trust** - Covers full **26–28 MHz range** - Strong signal for **long-distance communication** - Excellent choice for **fixed base installations** 👉 A proven performer for both **CB and 10m users**. --- ### 🏠 **Perfect For** - Home CB Base Stations - Rural & Long-Range Communication - Amateur (10m band) Use - Farm & Workshop Installations --- ### ⚙️ **Specifications** - Type: **5/8 Wave Base Antenna** - Frequency: **26–28 MHz** - Length: **6.4 Metres (21ft)** - Gain: **4.2 dB** - Power Handling: **Up to 1000 Watts** - Bandwidth: **2000 kHz** - Material: **Aluminium** --- ### ⚠️ **Installation Notes** ❗ Requires suitable **mast and mounting hardware** ❗ Best performance when mounted **high and clear of obstructions** ❗ Proper grounding recommended for safety and performance --- ### 💪 **Why Choose a 5/8 Wave Antenna** Compared to smaller antennas: - Better ground wave propagation - Improved range - Stronger signal performance 👉 Ideal for users who want **maximum efficiency from their setup**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mast clamps & wall brackets - Coax cable & connectors - SWR meters & tuning tools - Lightning protection & grounding kits --- ### 🔥 **Order Today** **Go bigger. Go further. Get the best from your CB setup.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) Please note that postage to Northern Ireland. Highlands Channel islands etc are subject to a courier surcharge and DO NOT qualify as domestic shipping!!. These are Courier rates that we have to pay and are beyond our control. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/gap-f-5-8-wave-vertical-silver-rod-type-home-base-cb-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/gap-f-5-8-wave-vertical-silver-rod-type-home-base-cb-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/gap-f-5-8-wave-vertical-silver-rod-type-home-base-cb-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/gap-f-5-8-wave-vertical-silver-rod-type-home-base-cb-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20GAP-F%205%2F8%20Wave%20Vertical%20Silver%20Rod%20type%20Home-Base%20CB%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fgap-f-5-8-wave-vertical-silver-rod-type-home-base-cb-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/gap-f-5-8-wave-vertical-silver-rod-type-home-base-cb-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/gap-f-5-8-wave-vertical-silver-rod-type-home-base-cb-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/gap-f-5-8-wave-vertical-silver-rod-type-home-base-cb-aerial/?share=telegram) - **Product categories:** Homebase Aerials --- ### [SIGMA EXCALIBUR Compact Home Base CB Antenna home base aerial](https://cbradio.co.uk/product/sigma-excalibur-compact-home-base-cb-antenna-home-base-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Excalibur Compact CB Base Antenna** is a **small, discreet homebase antenna**, perfect when a **full-size antenna isn’t practical**. Designed for **CB and 10m operation**, it delivers **surprisingly good performance from a compact 0.95m design**. --- ## 📡 Compact but Capable ✔ Length: **0.95m** ✔ Ideal for restricted spaces ✔ Great alternative to large base antennas --- ## 📶 Real-World Performance ✔ **4–5 mile range (outdoor install)** ✔ Up to **~2 miles (loft install)** ➡️ Range depends on location and conditions --- ## 🏠 Perfect for Limited Space Ideal when: - You can’t install a full-size antenna - You need a discreet setup - You’re installing in a loft or small garden --- ## ⚡ No Ground Plane Required ✔ Easy installation ✔ No radials needed ✔ Works straight out of the box --- ## 🔧 Easy to Install ✔ Supplied with **mounting bracket + U-bolts** ✔ Fits poles or wall mounts ✔ No tuning required --- ## 🌧 Built for Outdoor Use ✔ Fully weatherproof ✔ Low wind resistance ✔ Durable construction --- ## 🔇 Clean Operation ✔ Low bleed-over ✔ Stable performance ✔ Minimal interference --- ## 📡 Wide Compatibility ✔ Covers: - CB 27/81 - PR27 GB - 10m amateur band --- ## ⚙️ Technical Specifications - **Frequency:** 26–28 MHz - **Length:** 0.95m - **Power:** 500W - **Impedance:** 50 Ohm - **SWR:** ≤ 1.5:1 - **Connection:** SO239 (PL259 compatible) --- ## 📏 Recommended Coax Lengths (27 MHz) For best performance, use: - 8’ 10” - 17’ 9” - 27’ 6” - 40’ - 58’ - 76’ --- ## Key Features - Compact homebase antenna - No ground plane required - Weatherproof design - Easy installation - Suitable for CB & 10m --- ## Why Choose the Excalibur? ✔ Ideal for restricted spaces ✔ Quick and simple setup ✔ Reliable everyday performance ✔ Discreet installation --- ## Ideal For - Beginners - Home CB users - Loft installations - Small properties --- ## Straight Talking If you can’t fit a big antenna, this is one of the **best compact options that still performs**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sigma-excalibur-compact-home-base-cb-antenna-home-base-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sigma-excalibur-compact-home-base-cb-antenna-home-base-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sigma-excalibur-compact-home-base-cb-antenna-home-base-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sigma-excalibur-compact-home-base-cb-antenna-home-base-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SIGMA%20EXCALIBUR%20Compact%20Home%20Base%20CB%20Antenna%20home%20base%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsigma-excalibur-compact-home-base-cb-antenna-home-base-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sigma-excalibur-compact-home-base-cb-antenna-home-base-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sigma-excalibur-compact-home-base-cb-antenna-home-base-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sigma-excalibur-compact-home-base-cb-antenna-home-base-aerial/?share=telegram) - **Product categories:** Homebase Aerials --- ### [GAP-H 1/2 Wave Vertical Silver Rod type Home-Base CB Radio Aerial Antenna](https://cbradio.co.uk/product/gap-h-1-2-wave-vertical-silver-rod-type-home-base-cb-radio-aerial-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🏠 **GAP-H 1/2 Wave Silver Rod CB Base Antenna – 5.35m (18ft) – No Radials – 26–28MHz 1000W** **Simple Install • Strong Performance • No Ground Radials Needed** The **GAP-H 1/2 Wave “Silver Rod” CB Antenna** is a **popular base station aerial** known for its **easy installation and reliable performance**. 👉 With **no radials required**, it’s ideal where space is limited or a cleaner install is preferred. --- ### ✅ **Why Choose the GAP-H 1/2 Wave** ✔ **No Radials Required** – simple, tidy installation ✔ **1/2 Wave Design** – efficient and easy to set up ✔ **Wide Band Coverage (26–28 MHz)** ✔ **High Power Handling (Up to 1000W)** ✔ **Lightweight Aluminium Construction** – corrosion resistant --- ### 📡 **Performance Highlights** - Covers full **26–28 MHz CB band** - Wide bandwidth (**2000 kHz**) - Reliable performance for **local and medium range communication** 👉 Perfect for **home base stations and everyday use**. --- ### 🏠 **Perfect For** - Home CB Base Stations - Limited space installations - Roof or mast mounting - Farm & workshop setups --- ### ⚙️ **Specifications** - Model: **GAP-H 1/2 Wave Base Antenna** - Frequency: **26–28 MHz** - Length: **5.35 Metres (18ft)** - Gain: **4.2 dB** - Power Handling: **Up to 1000 Watts** - Bandwidth: **2000 kHz** - Radials: **None Required** - Material: **Aluminium** --- ### ⚠️ **Why No Radials Matters** Compared to traditional base antennas: - Easier installation - Cleaner appearance - Less space required - Fewer components to assemble 👉 Ideal for **quick, hassle-free setups**. --- ### 🛠 **Installation Notes** ❗ Mount as high and clear as possible for best performance ❗ Suitable mast and brackets required (not included) ❗ Grounding recommended for safety --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mast clamps & wall brackets - Coax cable & connectors - SWR meters & tuning tools - Lightning protection kits --- ### 🔥 **Order Today** **Simple setup. Clean install. Reliable performance.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) Please note that postage to Northern Ireland. Highlands Channel islands etc are subject to a courier surcharge and DO NOT qualify as domestic shipping!!. These are Courier rates that we have to pay and are beyond our control. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/gap-h-1-2-wave-vertical-silver-rod-type-home-base-cb-radio-aerial-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/gap-h-1-2-wave-vertical-silver-rod-type-home-base-cb-radio-aerial-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/gap-h-1-2-wave-vertical-silver-rod-type-home-base-cb-radio-aerial-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/gap-h-1-2-wave-vertical-silver-rod-type-home-base-cb-radio-aerial-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20GAP-H%201%2F2%20Wave%20Vertical%20Silver%20Rod%20type%20Home-Base%20CB%20Radio%20Aerial%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fgap-h-1-2-wave-vertical-silver-rod-type-home-base-cb-radio-aerial-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/gap-h-1-2-wave-vertical-silver-rod-type-home-base-cb-radio-aerial-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/gap-h-1-2-wave-vertical-silver-rod-type-home-base-cb-radio-aerial-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/gap-h-1-2-wave-vertical-silver-rod-type-home-base-cb-radio-aerial-antenna/?share=telegram) - **Product categories:** Homebase Aerials --- ### [rg58 15m mil spec with male BNC and pl259 Scanner antenna aerial](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-male-bnc-and-pl259-scanner-antenna-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **15m RG58 MIL-SPEC Coax Cable – BNC Male to PL259 – Scanner / CB / Ham Radio Lead** **Professional Grade Coax – Built Tough for Reliable Performance** This **15 metre MIL-SPEC RG58 coax cable** is a **premium quality, low-loss solution** designed for **scanner, CB, and amateur radio use**. 👉 Supplied with **BNC male connector fitted** and **PL259 supplied loose** *(or fitted on request)*. --- ### 💪 **MIL-SPEC Quality – Not Standard RG58** ✔ **Tinned Copper Core & Braid** – superior durability ✔ **95% Tight Woven Shielding** – reduced interference ✔ **Solid PE Dielectric** – stable signal performance ✔ **Heavy Duty Construction** – built for long-term use 👉 This is **not your average RG58**. --- ### ✅ **Key Features** ✔ **15 Metres Length** – ideal for base or mobile setups ✔ **BNC Male Connector Fitted (Scanner End)** ✔ **PL259 Supplied Loose (CB/Ham End)** ✔ **Optional Soldering Service Available** ✔ **50 Ohm Impedance** – perfect for radio applications --- ### 🔧 **Custom Option** - ✔ BNC already fitted - ✔ PL259 supplied loose 👉 Want the PL259 fitted? Just send us a message at checkout – we’ll solder it for you. --- ### 📡 **Perfect For** - Scanner antennas (BNC radios) - CB Radio setups - Amateur (Ham) radio - CCTV systems - HF installations --- ### ⚙️ **Specifications** - Length: **15 Metres** - Cable Type: **MIL-SPEC RG58** - Impedance: **50 Ohm** - Inner Conductor: **19 x 0.18mm Tinned Copper** - Dielectric: **2.95mm Solid PE** - Shielding: **95% Tinned Copper Braiding** - Outer Sheath: **4.95mm PVC** --- ### 🔬 **Why Tinned Copper?** ✔ **Up to 10x longer lifespan** ✔ **Excellent corrosion resistance** ✔ **Ideal for outdoor & marine use** ✔ **Consistent signal performance** 👉 Perfect for **aerial and radio applications**. --- ### ⚠️ **Important Notes** ❗ PL259 connector is **supplied loose** unless requested fitted ❗ Ensure correct connector type for your equipment --- ### 📦 **Other Lengths Available** 👉 Check our shop for: **10m • 20m • RG8X (Mini8) low loss cable** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Antennas & mounts - PL259 connectors & adaptors - SWR meters & tuning tools - CB & Ham radio equipment --- ### 🔥 **Order Today** **MIL-SPEC quality. Built to last. Reliable signal.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-male-bnc-and-pl259-scanner-antenna-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-male-bnc-and-pl259-scanner-antenna-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-male-bnc-and-pl259-scanner-antenna-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-male-bnc-and-pl259-scanner-antenna-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg58%2015m%20mil%20spec%20with%20male%20BNC%20and%20pl259%20Scanner%20antenna%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-15m-mil-spec-with-male-bnc-and-pl259-scanner-antenna-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-male-bnc-and-pl259-scanner-antenna-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-male-bnc-and-pl259-scanner-antenna-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-male-bnc-and-pl259-scanner-antenna-aerial/?share=telegram) - **Product categories:** RG58 --- ### [DIN plate in dash Mount For COBRA 19 DX EU CB Radio](https://cbradio.co.uk/product/din-plate-in-dash-mount-for-cobra-19-dx-eu-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚗 **Metal DIN Mount Kit for Cobra 19DX VI CB Radio – In-Dash Installation Faceplate** **Clean, Professional In-Dash Fit for Your CB Radio** This **metal DIN mount kit** allows you to install your **Cobra 19DX VI CB radio** neatly into a **standard dashboard DIN slot**, giving a **factory-style finish** to your setup. 👉 Ideal for cars, vans, and trucks where a tidy install matters. --- ### ✅ **Why Choose This DIN Mount** ✔ **All Metal Construction** – strong, durable & long-lasting ✔ **Professional In-Dash Installation** ✔ **Perfect Fit for Cobra 19DX VI (EU)** ✔ **Secure Mounting – No Movement or Vibration** ✔ **Far Superior to Cheap Plastic Versions** --- ### 📡 **Compatible With** - **Cobra 19DX VI (EU)** 👉 Designed specifically for this model for a clean, precise fit. --- ### ⚙️ **Specifications** - Type: **DIN In-Dash Mount Kit / Faceplate** - Material: **All Metal Construction** - Slot Dimensions: **117 x 46 mm** - Fitment: **Standard Car Radio DIN Slot** --- ### ⚠️ **Important Notes** ❗ **CB Radio NOT included** – mount only ❗ **Speaker Warning:** 👉 The built-in speaker will be covered when installed 👉 **External speaker required for audio output** --- ### 🚗 **Perfect For** - Car installations - Vans & commercial vehicles - Trucks / HGV setups - Clean, professional CB installs --- ### 💪 **Why Use a Proper DIN Mount** Without one: - Installations look untidy - Radios can move or vibrate - Fitment can be insecure 👉 This mount ensures a **solid, professional finish**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - External CB speakers - CB radios & accessories - Mounting kits & brackets - Coax cable & connectors --- ### 🔥 **Order Today** **Professional fit. Solid build. Clean install.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/din-plate-in-dash-mount-for-cobra-19-dx-eu-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/din-plate-in-dash-mount-for-cobra-19-dx-eu-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/din-plate-in-dash-mount-for-cobra-19-dx-eu-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/din-plate-in-dash-mount-for-cobra-19-dx-eu-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DIN%20plate%20in%20dash%20Mount%20For%20COBRA%2019%20DX%20EU%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdin-plate-in-dash-mount-for-cobra-19-dx-eu-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/din-plate-in-dash-mount-for-cobra-19-dx-eu-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/din-plate-in-dash-mount-for-cobra-19-dx-eu-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/din-plate-in-dash-mount-for-cobra-19-dx-eu-cb-radio/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [12v 24v DC Hella Type BMW or Scania Accessory Power plug DIN plug](https://cbradio.co.uk/product/12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌🚗 **12V / 24V Hella DIN Power Plug – Continental Socket – 15A – Car / Motorcycle / Caravan** **Compact, Secure Power Connection – Professional Grade** This **high-quality Hella / DIN (Continental) power plug** provides a **reliable and secure DC connection** for a wide range of vehicles and applications. 👉 A professional alternative to standard cigarette lighter plugs. --- ### ✅ **Key Features** ✔ **12V & 24V Compatible** ✔ **Max 15A Load Capacity** ✔ **Screw Terminal Connections** – secure wiring ✔ **Compact DIN / Hella Design** ✔ **Durable Construction** --- ### 🚗 **Used In** - Scania trucks - BMW motorcycles - Many vehicles using **DIN / Hella sockets** --- ### 📡 **Perfect For** - Motorcycles - Cars & vans - Caravans & campervans - Boats & marine use - Trucks / HGVs - 12V / 24V accessories --- ### 🔧 **Why Choose DIN / Hella Over Cigarette Plugs** ✔ More secure fit (won’t vibrate loose) ✔ Better electrical contact ✔ Handles higher loads more reliably ✔ More compact design 👉 Ideal for **professional and reliable power setups**. --- ### ⚙️ **Specifications** - Type: **Hella / DIN / Continental Power Plug** - Voltage: **12V – 24V DC** - Max Current: **15 Amps** - Connection: **Screw Terminals** - Build: **High Quality Housing** --- ### ⚠️ **Important Notes** ❗ Designed for **DIN / Hella sockets only** ❗ Not compatible with standard cigarette lighter sockets --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to wire & use --- ### 💬 **More Available** 👉 Check our shop for: - Power leads & connectors - Cigarette lighter plugs - CB radio power accessories - Electrical components --- ### 🔥 **Order Today** **Secure connection. Reliable power. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2012v%2024v%20DC%20Hella%20Type%20BMW%20or%20Scania%20Accessory%20Power%20plug%20DIN%20plug&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=telegram) - **Product categories:** Power Connectors, Truck Stuff --- ### [Mini8 20m Low loss coax cable RG-8x with 2 PL259](https://cbradio.co.uk/product/mini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini-8 RG8 20m Coax Cable** delivers **low-loss performance with excellent flexibility**, combining the electrical benefits of RG213 with the **slimmer, easier-to-handle size of RG58**. Ideal for **medium-length runs** in CB and amateur radio installations. --- ## 📡 Low Loss Performance ✔ Comparable to RG213 (RG213UBX) ✔ Reduced signal loss over distance ✔ Great for base station setups --- ## 🔧 Flexible Mini-8 Design - Diameter: **6.1mm (RG58-style)** - Easier to route than RG213 - Perfect for tight installs ✔ Performance without the bulk --- ## 🔌 Ready to Install ✔ **20 metre length** ✔ **1 x PL259 pre-soldered** ✔ Ideal for feeding through walls or conduit ➡️ Option to have both ends fitted on request --- ## 💪 High Quality Construction - **Stranded copper inner conductor** - **Foam polyethylene dielectric** - **95% copper braid shielding** ✔ Strong, flexible and efficient --- ## 📶 Excellent Shielding ✔ Screening effectiveness **>55dB (100–900 MHz)** ✔ Reduced interference and noise --- ## ⚡ Technical Performance **Attenuation (dB per 100m):** - 50 MHz – 7.2 dB - 100 MHz – 10.5 dB - 400 MHz – 22.2 dB - 600 MHz – 27.6 dB - 1000 MHz – 37.0 dB - 2400 MHz – 64.5 dB ✔ Reliable across HF, VHF & UHF --- ## 🧵 Quality Materials ✔ Plain copper conductors ✔ Foam dielectric for lower loss ✔ Low smoke PVC sheath --- ## 🔁 Other Lengths Available ✔ 10m / 15m / 20m / 25m / 30m / 40m ✔ RG58 and RG213 options also available --- ## Key Features - Mini-8 RG8 coax cable - 20 metre length - Low loss 50 Ohm - Flexible 6.1mm diameter - PL259 connector fitted --- ## Why Choose This Cable? ✔ Low loss without stiffness ✔ Easy installation ✔ High quality construction ✔ Ideal for medium runs --- ## Ideal For - CB radio base stations - Amateur radio setups - External antenna installs - Shack-to-antenna runs --- ## Straight Talking If 10m isn’t enough and 30m is overkill — this is your sweet spot. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini8%2020m%20Low%20loss%20coax%20cable%20RG-8x%20with%202%20PL259&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini8-rg8-20m-low-loss-coax-cable-rg-8x-with-2-pl259/?share=telegram) - **Product categories:** RG8 mini8 --- ### [pl259 7mm UHF 10 PL Plugs for rg8 mini8 coax pack of 10](https://cbradio.co.uk/product/pl259-7mm-uhf-10-pl-plugs-for-rg8-mini8-coax-pack-of-10/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌 **10x PL259 Plugs 7mm – UHF Connectors for RG8 / Mini 8 Coax – Solder Type – Pack of 10** **High Quality Connectors – Built for Reliable RF Performance** This pack of **10 premium PL259 (UHF) plugs** is designed for use with **RG8 / Mini 8 (RG8X) coaxial cable**, delivering a **secure, low-loss connection** for CB and amateur radio setups. Perfect for installers, hobbyists, and professionals who demand **durability and performance**. --- ### ✅ **Why These PL259 Plugs Stand Out** ✔ **7mm Entry – Ideal for RG8 / Mini 8 (RG8X)** ✔ **Brown Heat-Resistant Insert** – won’t melt during soldering ✔ **Superior Build Quality** – reliable long-term connection ✔ **Solder Type Connection** – ensures maximum signal integrity ✔ **Pack of 10** – great value for multiple installs --- ### ⚠️ **Avoid Cheap Low-Quality Connectors** Many cheaper PL259 plugs come with **white plastic inserts** that: - Melt when soldering - Deform and loosen connections - Cause poor signal and failure over time 👉 These feature **brown heat-resistant inserts**, making installation easier and more reliable. --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Base Stations - Mobile Installations - Antenna Builds & Repairs --- ### ⚙️ **Specifications** - Connector Type: **PL259 (UHF Male)** - Cable Size: **7mm (RG8 / Mini 8 / RG8X)** - Connection Type: **Solder** - Insert Type: **Brown Heat Resistant** - Quantity: **10 Plugs** --- ### 🛠 **Installation Notes** - Suitable for standard soldering methods - Works with RG8 / Mini 8 foam or solid dielectric cable - Provides a strong mechanical and electrical connection --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Trusted quality --- ### 💬 **More Radio Gear Available** 👉 Don’t forget to check our other listings for: - Coax cable (RG58 / RG8X / RG213) - Antennas & mounts - Adaptors & connectors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Get the job done properly – first time. No cheap shortcuts.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-7mm-uhf-10-pl-plugs-for-rg8-mini8-coax-pack-of-10/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-7mm-uhf-10-pl-plugs-for-rg8-mini8-coax-pack-of-10/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-7mm-uhf-10-pl-plugs-for-rg8-mini8-coax-pack-of-10/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-7mm-uhf-10-pl-plugs-for-rg8-mini8-coax-pack-of-10/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20pl259%207mm%20UHF%2010%20PL%20Plugs%20for%20rg8%20mini8%20coax%20pack%20of%2010&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-7mm-uhf-10-pl-plugs-for-rg8-mini8-coax-pack-of-10%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-7mm-uhf-10-pl-plugs-for-rg8-mini8-coax-pack-of-10/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-7mm-uhf-10-pl-plugs-for-rg8-mini8-coax-pack-of-10/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-7mm-uhf-10-pl-plugs-for-rg8-mini8-coax-pack-of-10/?share=telegram) - **Product categories:** PL259 Connectors --- ### [50 AMP PSU Switch Mode Power Supply Unit](https://cbradio.co.uk/product/sharman-50-amp-psu-switch-mode-power-supply-unit/) **Published:** October 5, 2023 **Author:** Jan **Content:** The **50A Switch Mode Power Supply** is a high-performance unit designed for **CB radios, amateur radio equipment and other 12V communication devices**. Delivering up to **50 amps of stable output**, this power supply is ideal for both base station setups and workshop use. --- ## ⚡ Clean Power for Radio Equipment ✔ Adjustable output: **9–15V DC** ✔ Stable voltage regulation (<2%) ✔ Up to **50A output current** ✔ Built-in protection for safe operation Perfect for powering high-demand radios and accessories. --- ## 🔇 Noise Offset Control (Key Feature) - Designed to **reduce switching noise interference** - Helps eliminate pulse noise from the power supply - Optimised for communication equipment use ✔ Especially useful for CB and amateur radio setups --- ## 📊 Easy Monitoring - Built-in meter displays: - Output voltage - Current draw - Clear, at-a-glance system monitoring --- ## 🔌 Practical Connections - Standard output terminals - **Cigarette lighter socket (10A max)** - Suitable for a wide range of devices --- ## Key Features - 50 Amp switch mode power supply - Adjustable 9–15V output - Noise offset control - Voltage and current display - Compact, bench-friendly design - Built-in protection systems --- ## Technical Specifications - **Input Voltage:** 220V AC - **Output Voltage:** 9 – 15V adjustable - **Voltage Regulation:** < 2% - **Maximum Output Current:** 50A - **Cigarette Socket Output:** 10A max - **Fuse:** 8A - **Protection:** - Short circuit protection - Automatic current limiting (>50A) - **Dimensions:** 170 x 120 x 260 mm - **Weight:** 3 kg --- ## ⚠️ Brand Note Supplied as either: - Sharman - Moonraker ✔ Same internal design and performance ✔ Only branding may vary depending on stock --- ## Ideal For - CB radio base stations - Amateur radio setups - Workshop and bench use - Powering multiple 12V devices --- ## Why Choose This Power Supply? ✔ High current capacity (50A) ✔ Clean, stable output ✔ Noise reduction feature for radio use ✔ Reliable and durable design --- ## Straight Talking If you need a **solid, high-current power supply for radio equipment**, this is a dependable choice that gets the job done properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sharman-50-amp-psu-switch-mode-power-supply-unit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sharman-50-amp-psu-switch-mode-power-supply-unit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sharman-50-amp-psu-switch-mode-power-supply-unit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sharman-50-amp-psu-switch-mode-power-supply-unit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2050%20AMP%20PSU%20Switch%20Mode%20Power%20Supply%20Unit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsharman-50-amp-psu-switch-mode-power-supply-unit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sharman-50-amp-psu-switch-mode-power-supply-unit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sharman-50-amp-psu-switch-mode-power-supply-unit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sharman-50-amp-psu-switch-mode-power-supply-unit/?share=telegram) - **Product categories:** Power Supplies and Inverters --- ### [Mini Springer CB aerial Sturdy psm1 Rear mount 5M cable Land Rover Defender 90](https://cbradio.co.uk/product/mini-springer-cb-aerial-sturdy-psm1-rear-mount-5m-cable-land-rover-defender-90/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙📡 **PSM-1 Defender CB Aerial Kit + Mini Stinger – Rear Mount – 3/8 Stud – 5m Cable – Off Road Setup** **The Ultimate Defender CB Setup – Strong, Clean & Ready to Fit** This **PSM-1 rear pillar mount kit** combined with a **Mini Stinger CB aerial** is the **go-to setup for Land Rover Defender owners**, delivering **reliable performance and a professional install**. 👉 The exact style mount seen on **9 out of 10 Defenders**. --- ### ✅ **Complete Kit – Everything You Need** ✔ **PSM-1 Rear Pillar Mount (Heavy Duty)** ✔ **Mini Stinger CB Aerial (Pre-Tuned)** ✔ **5 Metres High Quality RG58U Coax Cable** ✔ **PL259 Connector (Radio End)** ✔ **Step-by-Step Fitting Instructions** --- ### 🚙 **Designed for Defender** - Perfect fit for **Defender 90 (5m cable)** - **7m cable available** for Defender 110 (see our shop) - Also suitable for: - 4×4 vehicles - Trucks / pickups - High-roof vans --- ### 📡 **Mini Stinger Aerial – Compact & Tough** - **Base loaded spring design** – absorbs knocks & vibration - **Flexible stainless steel whip** - Designed for **off-road and daily use** - Covers **27–28 MHz CB band** 👉 **Virtually indestructible and built for real use**. --- ### 💪 **PSM-1 Mount – Proven Design** ✔ Strong, stable rear mounting position ✔ Clean, factory-style installation ✔ No roof drilling required ✔ Ideal antenna positioning for better signal --- ### ⚙️ **Specifications** **Aerial:** - Type: **Mini Stinger / Springer CB Aerial** - Frequency: **27–28 MHz** - Length: **Approx. 89cm** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8 Thread** - Pre-Tuned: **Yes** **Mount & Cable:** - Mount: **PSM-1 Rear Pillar Mount** - Cable: **5 Metres RG58U (Low Loss)** - Connector: **PL259 (Radio End)** --- ### ⭐ **Why Buy From Us** ✔ **Tailor Made for Your Vehicle** ✔ **Hand-Assembled High Quality Cable (Not Cheap Imports)** ✔ **British Made Springer Aerials 🇬🇧** ✔ **Real Experience – We Do This Professionally** ✔ **Detailed Fitting Instructions Included** 👉 Built properly — not thrown together. --- ### ⚠️ **Why This Kit is Better** Cheap kits: - Use poor quality cable - Have weak mounts - Don’t last off-road 👉 This is a **proven, professional-grade setup**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - SWR meters & tuning tools - External speakers - Mount upgrades & accessories --- ### 🔥 **Order Today** **The Defender setup everyone uses – strong, reliable, proven.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-cb-aerial-sturdy-psm1-rear-mount-5m-cable-land-rover-defender-90/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-cb-aerial-sturdy-psm1-rear-mount-5m-cable-land-rover-defender-90/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-cb-aerial-sturdy-psm1-rear-mount-5m-cable-land-rover-defender-90/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-cb-aerial-sturdy-psm1-rear-mount-5m-cable-land-rover-defender-90/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20Springer%20CB%20aerial%20Sturdy%20psm1%20Rear%20mount%205M%20cable%20Land%20Rover%20Defender%2090&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-cb-aerial-sturdy-psm1-rear-mount-5m-cable-land-rover-defender-90%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-cb-aerial-sturdy-psm1-rear-mount-5m-cable-land-rover-defender-90/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-cb-aerial-sturdy-psm1-rear-mount-5m-cable-land-rover-defender-90/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-cb-aerial-sturdy-psm1-rear-mount-5m-cable-land-rover-defender-90/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [TTI TCB-900 EVO CB Radio Ultra Short DIN Size](https://cbradio.co.uk/product/tti-tcb-900-evo-compact-cb-radio-80-channel-40uk-40eu-am-fm/) **Published:** October 5, 2023 **Author:** Jan **Content:** The **TTI TCB-900 EVO CB Radio** is one of the most compact full-feature CB radios available — designed specifically for **trucks, vans, 4x4s and modern vehicles where space is limited**. With an ultra-short depth of just **94mm**, a **front-mounted speaker** and **front mic socket**, this radio solves the biggest installation problems in one go. If space is tight — this is the one. --- ## 🚛 Built for Tight Dashboards ✔ **Only 94mm deep** – one of the shortest CB radios available ✔ Front speaker for clear, forward-facing audio ✔ Front microphone socket for easy access ✔ Large, easy-to-read LCD display ✔ 3-colour selectable backlight ✔ **12V & 24V compatible** – ideal for HGVs The larger display ensures clear visibility whether mounted in-dash, overhead or under the dash. --- ## 🔧 Flexible Installation - Supplied with **under-dash mounting bracket** - Optional **DIN adapter (£14.95)** for standard radio slot fitting - Compact design fits where others won’t Perfect for modern vehicles with limited space. --- ## Key Features - 4W Output Power (legal CB standard) - AM / FM operation (country dependent) - Multi-band (EU compatible) - DSS (Dynamic Squelch System) - Emergency Channel 9/19 - Keypad Lock - Microphone Gain Control - RF Attenuation - Scan Function - Speaker Mute - Menu settings (Mic Gain, Call Tone, Beep, TOT, Dimmer) - Multi-colour backlighting --- ## Technical Specifications **General** - Channels: 40 - Frequency Range: - 26.965 – 27.405 MHz (CEPT) - 27.60125 – 27.99125 MHz (UK) - Modes: FM (F3E), AM (A3E) - Frequency Control: PLL Synthesizer - Frequency Tolerance: 0.002% - Operating Temp: -10°C to +55°C - Dimensions: 170 x 51 x 94 mm - Weight: 978.5 g **Transmitter** - Output Power: 4W @ 13.8V - Modulation: - AM: 85–95% - FM: 1.8 kHz ± 0.2 kHz - Output Impedance: 50 Ohm - Harmonic Suppression: < -54 dBm - Current Drain: 1.6A max **Receiver** - System: Dual Conversion Superheterodyne - IF Frequencies: 10.695 MHz / 455 kHz - Sensitivity: - AM: 0.7 µV - FM: 0.5 µV - Image Rejection: > 60 dB - Adjacent Channel Rejection: > 60 dB - Audio Output: 4W @ 8 Ohm - Speaker: Front-mounted - Squelch: Adjustable (DSS included) --- ## Why Choose the TCB-900 EVO? This radio solves three common problems: ✔ **No space for a CB** ✔ **Poor audio direction from rear speakers** ✔ **Small, hard-to-read displays** The TCB-900 EVO fixes all three — without compromise. --- ## Ideal For - HGV and truck drivers - Vans and work vehicles - 4×4 and off-road setups - Modern vehicles with limited dash space - Professional drivers needing clear audio --- ## Straight Talking If you’re struggling to fit a CB radio in your vehicle, this is one of the **easiest and smartest solutions available**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tti-tcb-900-evo-compact-cb-radio-80-channel-40uk-40eu-am-fm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tti-tcb-900-evo-compact-cb-radio-80-channel-40uk-40eu-am-fm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tti-tcb-900-evo-compact-cb-radio-80-channel-40uk-40eu-am-fm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tti-tcb-900-evo-compact-cb-radio-80-channel-40uk-40eu-am-fm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TTI%20TCB-900%20EVO%20CB%20Radio%20Ultra%20Short%20DIN%20Size&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftti-tcb-900-evo-compact-cb-radio-80-channel-40uk-40eu-am-fm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tti-tcb-900-evo-compact-cb-radio-80-channel-40uk-40eu-am-fm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tti-tcb-900-evo-compact-cb-radio-80-channel-40uk-40eu-am-fm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tti-tcb-900-evo-compact-cb-radio-80-channel-40uk-40eu-am-fm/?share=telegram) - **Product categories:** TTi --- ### [metal din mount face plate for Midland 48, Intek m490 or TTI 881 cb radio](https://cbradio.co.uk/product/metal-din-mount-face-plate-for-midland-48-intek-m490-or-tti-881-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📻 **Metal DIN Mount Kit for CB Radio – In-Dash Adapter – TTi / Midland / Intek** **Professional Install • All Metal • Perfect Fit** This **metal DIN mounting kit** allows you to install your **CB radio neatly into a standard car stereo slot**, giving a **clean, factory-style finish**. 👉 Ideal for **cars, vans, 4x4s and professional installs**. --- ### 🔥 **Why Choose This DIN Mount** ✔ **All Metal Construction – No Cheap Plastic** ✔ **Strong & Secure Fit** ✔ **Professional OEM-Style Installation** ✔ **Designed for Popular CB Models** --- ### ✅ **Compatible Radios** ✔ TTi TCB-880 / TTi TCB-881 ✔ Midland 48 / Midland 248 ✔ Intek M-150 ✔ Intek M-490 ✔ Intek M-495 ✔ Intek M-550 ✔ Intek M-760 ✔ Intek M-899 👉 Ensures a **proper, snug fit for supported radios**. --- ### ⚙️ **Specifications** - Type: **DIN Mount Adapter (In-Dash)** - Slot Dimensions: **154.5 x 51 mm** - Material: **Full Metal Construction** - Fitment: **Standard DIN Slot** --- ### 💡 **Why Use a DIN Mount** Without a mount: - Messy installation - Loose radio positioning - Exposed wiring 👉 With this mount: ✔ Clean professional look ✔ Secure installation ✔ Factory-style finish --- ### 🔊 **Important Installation Note** ❗ The DIN mount will **cover the radio’s built-in speaker** 👉 You will need an **external speaker** for audio --- ### 🚗 **Perfect For** - Cars & vans - 4×4 & off-road vehicles - Fleet & commercial installs - Professional CB setups --- ### ⚠️ **Important Notes** ❗ **CB radio NOT included** ❗ Check compatibility before purchase ❗ External speaker required --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - External speakers - CB radios - Antennas & mounts - Coax cable & connectors --- ### 🔥 **Order Today** **Clean install. Solid fit. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/metal-din-mount-face-plate-for-midland-48-intek-m490-or-tti-881-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/metal-din-mount-face-plate-for-midland-48-intek-m490-or-tti-881-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/metal-din-mount-face-plate-for-midland-48-intek-m490-or-tti-881-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/metal-din-mount-face-plate-for-midland-48-intek-m490-or-tti-881-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20metal%20din%20mount%20face%20plate%20for%20Midland%2048%2C%20Intek%20m490%20or%20TTI%20881%20cb%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmetal-din-mount-face-plate-for-midland-48-intek-m490-or-tti-881-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/metal-din-mount-face-plate-for-midland-48-intek-m490-or-tti-881-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/metal-din-mount-face-plate-for-midland-48-intek-m490-or-tti-881-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/metal-din-mount-face-plate-for-midland-48-intek-m490-or-tti-881-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [Short Quick Release for 3/8 CB Radio aerial or Ham Radio Antenna](https://cbradio.co.uk/product/short-quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3/8 Quick Release Aerial Disconnect** is a **heavy-duty quick disconnect**, designed to let you **remove your antenna in seconds** without tools. Perfect for anyone running a **3/8 threaded CB or ham radio aerial** on a vehicle. --- ## ⚡ Instant Antenna Removal ✔ Remove your aerial in seconds ✔ No tools required ✔ Quick bayonet-style fitting ✔ Simple and effective --- ## 🔩 Standard 3/8″ Compatibility ✔ Fits all **3/8 threaded antennas and mounts** ✔ Ideal for CB and ham radio aerials --- ## 💪 Heavy Duty Construction ✔ Built for regular use ✔ Strong and reliable ✔ Designed for mobile environments --- ## 🔒 Double Bayonet Locking System ✔ Dual slot design ✔ Reduces risk of loosening ✔ Secure connection even on rough terrain --- ## 🚗 Perfect for Real-World Use Ideal when: - Entering **multi-storey car parks** - Driving under **low bridges** - Going off-road on **green lanes** - Running tall antennas on trucks or 4x4s ✔ Prevents damage to your aerial --- ## 🔧 Easy to Use - Twist and release - Remove aerial - Refit in seconds ✔ No hassle --- ## 📡 Protect Your Equipment ✔ Prevents bending or snapping antennas ✔ Extends aerial lifespan ✔ Saves money long-term --- ## Key Features - Quick release aerial disconnect - 3/8″ thread fitting - Double bayonet locking system - Heavy duty design - Tool-free operation --- ## Why Choose This? ✔ Fast and convenient ✔ Secure locking design ✔ Protects your antenna ✔ Ideal for tall aerial setups --- ## Ideal For - Truck drivers - 4×4 and off-road users - Delivery vehicles - Anyone with a tall antenna --- ## Straight Talking If you’ve ever hit a height restriction, you’ll wish you had one of these already. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/short-quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/short-quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/short-quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/short-quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Short%20Quick%20Release%20for%203%2F8%20CB%20Radio%20aerial%20or%20Ham%20Radio%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fshort-quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/short-quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/short-quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/short-quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=telegram) - **Product categories:** CB radio Accessories --- ### [rg213 5m high quality mil spec low loss 50 Ohm coax cable with 2 pl259 connectors](https://cbradio.co.uk/product/rg213-5m-mil-spec-low-loss-50-ohm-coax-cable-with-2-pl259-connectors/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **RG213 5m MIL-SPEC Coax Cable – Low Loss 50 Ohm – 2x PL259 – CB / Ham Radio Lead** **High Power • Low Loss • Built for Serious Installations** This **5 metre RG213 MIL-SPEC coax cable** is a **premium low-loss solution**, ideal for **CB, amateur radio, and high-power applications**. 👉 Supplied with **2 x PL259 connectors** *(one fitted, one loose for easy installation)*. --- ### 💪 **Professional Grade RG213** ✔ **98% Dense Copper Braid** – excellent shielding ✔ **Stranded Copper Core** – flexible & durable ✔ **Low Loss Performance** – ideal for transmission ✔ **Heavy Duty Outer Sheath** – built for outdoor use 👉 This is **true MIL-SPEC RG213 – not cheap alternatives**. --- ### ✅ **Key Features** ✔ **5 Metre Length** – perfect for short, high-quality runs ✔ **2 x PL259 Connectors Included** ✔ **One Plug Fitted / One Loose** – easy routing through tight spaces ✔ **50 Ohm Impedance** – ideal for radio systems ✔ **Suitable for High Power Applications** --- ### 🔧 **Installation Advantage** - ✔ One connector pre-fitted - ✔ One supplied loose 👉 Feed cable through walls or panels, then fit the second connector. --- ### 📡 **Perfect For** - CB Radio installations - Amateur (Ham) radio - Base station setups - High power transmission systems - Low loss short cable runs --- ### ⚙️ **Specifications** - Length: **5 Metres** - Cable Type: **RG213 MIL-SPEC** - Impedance: **50 Ohm** - Diameter: **9.65mm (approx. 9mm)** - Core: **7 x 0.72mm Stranded Copper** - Shielding: **98% Copper Braid (192 x 0.20)** - Loss @ 100MHz: **0.7 dB per 10m** - Colour: **Black** --- ### 💡 **Why Choose RG213** Compared to RG58: - Lower signal loss - Better shielding - Handles higher power - Ideal for base station use 👉 The **preferred choice for serious radio setups**. --- ### ⚠️ **Important Notes** ❗ One PL259 supplied loose (can be fitted on request) ❗ Ensure correct installation for best performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - Longer RG213 cable lengths - RG58 & RG8X coax - PL259 connectors & adaptors - Antennas & mounts --- ### 🔥 **Order Today** **Low loss. High power. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg213-5m-mil-spec-low-loss-50-ohm-coax-cable-with-2-pl259-connectors/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg213-5m-mil-spec-low-loss-50-ohm-coax-cable-with-2-pl259-connectors/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg213-5m-mil-spec-low-loss-50-ohm-coax-cable-with-2-pl259-connectors/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg213-5m-mil-spec-low-loss-50-ohm-coax-cable-with-2-pl259-connectors/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg213%205m%20high%20quality%20mil%20spec%20low%20loss%2050%20Ohm%20coax%20cable%20with%202%20pl259%20connectors&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg213-5m-mil-spec-low-loss-50-ohm-coax-cable-with-2-pl259-connectors%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg213-5m-mil-spec-low-loss-50-ohm-coax-cable-with-2-pl259-connectors/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg213-5m-mil-spec-low-loss-50-ohm-coax-cable-with-2-pl259-connectors/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg213-5m-mil-spec-low-loss-50-ohm-coax-cable-with-2-pl259-connectors/?share=telegram) - **Product categories:** RG213 --- ### [rg213 20m 65 foot mil spec LOW LOSS with 2 x PL259 connectors](https://cbradio.co.uk/product/rg-213-20m-65-foot-mil-spec-low-loss-with-2-x-pl259-connectors/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG213 20m Coax Cable with PL259 Connectors** is a **high-quality mil-spec low loss coax**, built for **maximum performance and high-power applications**. With its **thick construction and heavy copper braid**, RG213 is the go-to choice when you need **minimal signal loss and maximum durability**. --- ## 📡 Low Loss Performance ✔ Designed for **minimal signal loss** ✔ Ideal for **longer cable runs** ✔ Excellent performance across HF, VHF & UHF --- ## ⚡ Built for High Power ✔ Suitable for **high power transmission** ✔ Handles demanding radio setups ✔ Ideal for base stations and amplifiers --- ## 🔧 Heavy Duty Construction ✔ **7 x 0.72mm copper core** ✔ **95–98% copper braid shielding** ✔ Thick outer diameter (**~9.65mm**) ✔ Strong, durable and reliable --- ## 🔌 Ready to Use ✔ **20 metre (65ft) length** ✔ **2 x PL259 connectors included** ✔ One plug pre-soldered for convenience ➡️ Easy installation through walls or conduits --- ## 📻 Multi-Use Applications Perfect for: - CB radio - Amateur (ham) radio - Taxi / commercial antennas - High power installations --- ## 📶 Excellent Shielding ✔ High braid coverage reduces interference ✔ Cleaner signal transmission ✔ Reliable in noisy environments --- ## ⚙️ Technical Specifications - **Length:** 20m (65ft) - **Impedance:** 50 Ohm - **Core:** 7 x 0.72mm - **Braid:** 95–98% copper - **Outer Diameter:** ~9.65mm - **Loss (@100MHz):** ~0.7 dB per 10m - **Colour:** Black --- ## 💪 Built for Serious Installations ✔ Ideal for fixed base stations ✔ Suitable for outdoor use ✔ Handles demanding setups --- ## Key Features - RG213 mil-spec coax - 20m length - Low loss design - 2 x PL259 connectors - High power capable --- ## Why Choose RG213? ✔ Lower loss than RG58 ✔ Better for high power ✔ Stronger and more durable ✔ Professional-grade cable --- ## Ideal For - Base station setups - High power CB users - Amateur radio operators - Permanent installations --- ## Straight Talking If you want **proper performance and don’t mind thicker cable**, RG213 is the right choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg-213-20m-65-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg-213-20m-65-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg-213-20m-65-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg-213-20m-65-foot-mil-spec-low-loss-with-2-x-pl259-connectors/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg213%2020m%2065%20foot%20mil%20spec%20LOW%20LOSS%20with%202%20x%20PL259%20connectors&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg-213-20m-65-foot-mil-spec-low-loss-with-2-x-pl259-connectors%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg-213-20m-65-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg-213-20m-65-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg-213-20m-65-foot-mil-spec-low-loss-with-2-x-pl259-connectors/?share=telegram) - **Product categories:** RG213 --- ### [RG58 Coax Cable 5M 2x PL259 Plugs Fitted and PL258 Coupler](https://cbradio.co.uk/product/rg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 5m RG58 Coax Cable – 2x PL259 Plugs + PL258 Coupler – CB HAM Radio **Complete Lead • 95% Braid • Ready to Use** This is **5 metres of high quality RG58 coax cable**, supplied with **2x PL259 plugs already fitted** and a **PL258 coupler included**. 👉 Plug in and go – no soldering needed --- 🔥 **Why Choose This Cable** ✔ 5m RG58 Low Loss Cable ✔ 2x PL259 Plugs Fitted ✔ PL258 Female Coupler Included ✔ 95% Copper Braid Shielding ✔ Ready to Use 👉 Everything you need in one pack --- 📦 **What’s Included** ✔ 5 Metres RG58 Coax Cable ✔ 2x PL259 Connectors (Fitted) ✔ 1x PL258 Female Coupler 👉 Connect straight out the box --- 📡 **Perfect For** CB Radio HAM / Amateur Radio Scanners CCTV Systems 👉 Ideal for extending or linking cables --- ⚙️ **Specifications** Inner Conductor: 19 x 0.18mm Tinned Copper Dielectric: Solid PE (2.95mm) Shielding: 95% Tinned Copper Braid Outer Sheath: PVC (4.95mm) Impedance: 50 Ohm --- 💡 **Why This Cable Stands Out** ✔ Thick 95% braid for better shielding ✔ Pre-fitted plugs save time ✔ Coupler adds extra flexibility ✔ Proper quality cable – not cheap imports 👉 Built for reliable performance --- 🔧 **Installation** ✔ Connect PL259 to radio / aerial ✔ Use coupler if extending cables 👉 Quick and simple setup --- ⚠️ **Important Notes** ❗ Ensure tight connections for best performance ❗ Suitable for indoor & mobile use ❗ Ideal for radio and signal applications --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: Longer cable lengths Connectors Aerials Radio accessories --- 🔥 **Order Today** **Plug in. Connect. Done right.** 📡🔌 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG58%20Coax%20Cable%205M%202x%20PL259%20Plugs%20Fitted%20and%20PL258%20Coupler&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-coax-cable-5m-2x-pl259-plugs-fitted-and-pl258-coupler/?share=telegram) - **Product categories:** Patch Leads --- ### [rg58 20m 65 foot high quality mil spec with 2 PL259 for ham cb radio or scanner](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG58 20m Coax Cable with PL259 Connectors** is a **high-quality mil-spec 50Ω coax**, built with **tinned copper and a tight 95% braid** for **reliable performance and durability**. Perfect for **CB, amateur radio, scanners, and CCTV applications**, especially where **flexibility and ease of installation** are important. --- ## 📡 Reliable Signal Performance ✔ 50 Ohm impedance ✔ Suitable for **HF, VHF & UHF** ✔ Stable everyday performance --- ## 💪 High Quality Construction ✔ **19 x 0.18mm tinned copper conductor** ✔ **Solid PE dielectric (2.95mm)** ✔ **95% tinned copper braid shielding** ✔ **Durable PVC outer sheath (4.95mm)** ✔ Built properly — not cheap cable --- ## 🔌 Supplied with 2 x PL259 Connectors ✔ **1 x PL259 pre-soldered** ✔ **1 x PL259 loose** ➡️ Ideal for feeding through walls or conduit before fitting the second connector --- ## 📏 20 Metre (65ft) Length ✔ Ideal for medium runs ✔ Perfect for base station setups ✔ Flexible and easy to route --- ## 🔧 Tinned Copper Advantage ✔ Better corrosion resistance ✔ Longer lifespan (up to 10x vs bare copper) ✔ Ideal for outdoor and damp environments --- ## 📻 Multi-Use Applications Perfect for: - CB radio - Amateur (ham) radio - Scanner systems - CCTV installations --- ## 📶 Strong Shielding ✔ 95% braid reduces interference ✔ Cleaner signal transmission ✔ Reliable in noisy environments --- ## 🔁 More Options Available ✔ 10m / 20m / 25m lengths available ✔ Mini-8 (RG8) also available for lower loss --- ## Key Features - 20m RG58 coax cable - Mil-spec construction - Tinned copper core - 95% braid shielding - 2 x PL259 connectors (1 fitted) --- ## Why Choose This Cable? ✔ Flexible and easy to install ✔ Good all-round performance ✔ Corrosion-resistant materials ✔ Great value --- ## Ideal For - Base station installs - Mobile radio setups - Scanner users - General coax applications --- ## Straight Talking If you want **good quality, flexible coax that’s easy to work with**, this does the job properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg58%2020m%2065%20foot%20high%20quality%20mil%20spec%20with%202%20PL259%20for%20ham%20cb%20radio%20or%20scanner&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-with-2-pl259-for-ham-cb-radio-or-scanner/?share=telegram) - **Product categories:** RG58 --- ### [rg58 15m mil spec with 2 x pl259 for ham scanner or cb radio](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-2-x-pl259-for-ham-scanner-or-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG58 15m Coax Cable with PL259** is an **extremely high-quality mil-spec 50Ω coax**, built with **tinned copper and a tight 95% braid** for **reliable signal performance and long-term durability**. Ideal for **medium-length runs** in CB, amateur radio, scanner, and CCTV setups. --- ## 📡 Reliable Signal Performance ✔ 50 Ohm impedance ✔ Suitable for **HF, VHF & UHF** ✔ Stable everyday performance --- ## 💪 High Quality Construction ✔ **19 x 0.18mm tinned copper conductor** ✔ **Solid PE dielectric (2.95mm)** ✔ **95% tinned copper braid shielding** ✔ **Durable PVC outer sheath (4.95mm)** ✔ Proper quality — not budget cable --- ## 🔌 Supplied with 2 x PL259 Connectors ✔ **1 x PL259 pre-soldered** ✔ **1 x PL259 loose** ➡️ Perfect for feeding through walls before fitting the second plug --- ## 📏 15 Metre Length ✔ Ideal for medium runs ✔ Great balance between flexibility and reach ✔ Suitable for base station or mobile installs --- ## 🔧 Tinned Copper Advantage ✔ Superior corrosion resistance ✔ Longer lifespan (up to 10x vs bare copper) ✔ Ideal for outdoor and damp environments --- ## 📻 Multi-Use Applications Perfect for: - CB radio - Amateur (ham) radio - Scanner systems - CCTV installations --- ## 📶 Strong Shielding ✔ 95% braid reduces interference ✔ Cleaner signal transmission ✔ Reliable in noisy environments --- ## 🔁 Other Options Available ✔ 10m / 15m / 20m / 25m lengths ✔ Mini-8 (RG8) and RG213 also available --- ## Key Features - 15m RG58 coax cable - Mil-spec construction - Tinned copper core - 95% braid shielding - 2 x PL259 connectors (1 fitted) --- ## Why Choose This Cable? ✔ Flexible and easy to install ✔ Durable and corrosion resistant ✔ Reliable all-round performance ✔ Great value --- ## Ideal For - Base station installs - Mobile setups - Scanner users - General coax applications --- ## Straight Talking If you need a **decent mid-length coax that’s easy to work with and built to last**, this is it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-2-x-pl259-for-ham-scanner-or-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-2-x-pl259-for-ham-scanner-or-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-2-x-pl259-for-ham-scanner-or-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-2-x-pl259-for-ham-scanner-or-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg58%2015m%20mil%20spec%20with%202%20x%20pl259%20for%20ham%20scanner%20or%20cb%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-15m-mil-spec-with-2-x-pl259-for-ham-scanner-or-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-2-x-pl259-for-ham-scanner-or-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-2-x-pl259-for-ham-scanner-or-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-15m-mil-spec-with-2-x-pl259-for-ham-scanner-or-cb-radio/?share=telegram) - **Product categories:** RG58 --- ### [RG58 30m of High Quality mil spec with 2 x PL259](https://cbradio.co.uk/product/rg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG58 30m Coax Cable with PL259** is an **extremely high-quality mil-spec 50Ω coax**, built with a **tight 95% tinned copper braid** for **reliable performance and reduced interference**. Designed for **longer runs**, this cable is ideal for **CB, amateur radio, scanners, and CCTV applications**. --- ## 📡 Reliable Everyday Performance ✔ 50 Ohm impedance ✔ Suitable for **HF, VHF & UHF use** ✔ Stable signal transmission --- ## 💪 Serious Build Quality ✔ **Tinned copper conductor (19 x 0.18mm)** ✔ **Solid PE dielectric (2.95mm)** ✔ **95% tinned copper braid shielding** ✔ **Durable PVC outer sheath (4.95mm)** ✔ Built properly — not cheap cable --- ## 🔌 Supplied with 2 x PL259 Connectors ✔ **1 x PL259 pre-soldered** ✔ **1 x PL259 loose** ➡️ Ideal for feeding through walls or conduit before fitting the second connector --- ## 📏 30 Metre Length ✔ Perfect for longer antenna runs ✔ Suitable for base station setups ✔ Flexible and easy to route --- ## 📻 Multi-Use Cable Perfect for: - CB radio - Amateur (ham) radio - Scanner systems - CCTV installations --- ## 📶 Strong Shielding ✔ 95% braid reduces interference ✔ Improves signal quality ✔ Reliable performance in noisy environments --- ## 🔁 More Options Available ✔ 10m / 20m / 30m lengths available ✔ Mini-8 (RG8) also available for lower loss --- ## Key Features - 30m RG58 coax cable - Mil-spec construction - 95% copper braid shielding - 2 x PL259 connectors (1 fitted) - Flexible and easy to install --- ## Why Choose This Cable? ✔ High shielding quality ✔ Easy installation setup ✔ Reliable long-run performance ✔ Great value --- ## Ideal For - Base station installs - Shack-to-antenna runs - Mobile radio setups - General coax applications --- ## Straight Talking If you want **proper RG58 that won’t let you down**, this is it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG58%2030m%20of%20High%20Quality%20mil%20spec%20with%202%20x%20PL259&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-30m-of-high-quality-mil-spec-with-2-x-pl259-for-ham-or-cb-radio-or-scanner/?share=telegram) - **Product categories:** RG58 --- ### [rg58 25m mil spec coax cable with 2x pl259 for ham or cb radio or scanner](https://cbradio.co.uk/product/rg58-25m-mil-spec-coax-cable-with-2x-pl259-for-ham-or-cb-radio-or-scanner/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG58 25m Coax Cable with PL259** is an **extremely high-quality mil-spec 50Ω coax**, designed for **reliable signal transmission across a wide range of radio applications**. With a **tight 95% copper braid**, this cable offers **excellent shielding and flexibility**, making it ideal for both **mobile and base station use**. --- ## 📡 Reliable Performance ✔ 50 Ohm impedance ✔ Suitable for **HF, VHF and UHF use** ✔ Stable signal transmission --- ## 🔧 High Quality Construction - **Tinned copper conductor (19 x 0.18mm)** - **Solid PE dielectric (2.95mm)** - **95% tinned copper braid shielding** - **Durable PVC outer sheath (4.95mm)** ✔ Built for performance and longevity --- ## 🔌 Supplied with 2 x PL259 Connectors ✔ **1 x PL259 pre-soldered** ✔ **1 x PL259 loose** ➡️ Perfect for feeding cable through walls or conduits before fitting the second connector --- ## 📏 25 Metre Length ✔ Ideal for base station runs ✔ Suitable for shack-to-antenna installs ✔ Flexible and easy to route --- ## 📻 Multi-Use Cable Perfect for: - CB radio - Amateur (ham) radio - Scanners - CCTV systems --- ## 💪 Flexible & Easy to Install ✔ Slim and manageable ✔ Easy to route through tight spaces ✔ Suitable for indoor and outdoor use --- ## 🔁 More Options Available ✔ 10m / 20m lengths available ✔ Mini-8 (RG8) also available in our shop --- ## Key Features - 25m RG58 coax cable - Mil-spec construction - 95% copper braid shielding - 2 x PL259 connectors (1 fitted) - Flexible and easy to install --- ## Why Choose This Cable? ✔ High shielding for reduced interference ✔ Practical install-friendly design ✔ Reliable everyday performance ✔ Great value --- ## Ideal For - Base station setups - Mobile radio installs - Scanner users - General coax applications --- ## Straight Talking If you want a **good quality, no-nonsense coax that’s easy to install**, this does the job properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-25m-mil-spec-coax-cable-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-25m-mil-spec-coax-cable-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-25m-mil-spec-coax-cable-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-25m-mil-spec-coax-cable-with-2x-pl259-for-ham-or-cb-radio-or-scanner/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg58%2025m%20mil%20spec%20coax%20cable%20with%202x%20pl259%20for%20ham%20or%20cb%20radio%20or%20scanner&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-25m-mil-spec-coax-cable-with-2x-pl259-for-ham-or-cb-radio-or-scanner%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-25m-mil-spec-coax-cable-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-25m-mil-spec-coax-cable-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-25m-mil-spec-coax-cable-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=telegram) - **Product categories:** RG58 --- ### [rg58 20m 65 foot high quality Mil Spec terminated with male BNC and lose pl259](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-terminated-with-male-bnc-and-lose-pl259/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **20m RG58 MIL-SPEC Coax Cable – BNC Male to PL259 – 50 Ohm – CB / Ham / Scanner Lead** **Serious Quality Coax – Built for Reliable Performance** This **20 metre (65ft) MIL-SPEC RG58 coax cable** is a **high-quality, low-loss solution** designed for **CB, amateur radio, scanners, and CCTV systems**. 👉 Supplied with **BNC male connector fitted** and **PL259 supplied loose** *(or fitted on request)*. --- ### 💪 **MIL-SPEC Quality – Not Standard RG58** ✔ **Tinned Copper Core & Braid** – superior durability ✔ **95% Tight Woven Shielding** – reduced interference ✔ **Solid PE Dielectric** – stable signal performance ✔ **Heavy Duty Construction** – built to last 👉 Make no mistake – **this is serious quality cable**. --- ### ✅ **Key Features** ✔ **20 Metres (Approx. 65ft)** ✔ **BNC Male Connector Fitted (Scanner End)** ✔ **PL259 Supplied Loose (CB/Ham End)** ✔ **Optional Soldering Service Available** ✔ **50 Ohm Impedance** – ideal for radio use ✔ **Suitable for HF Applications** --- ### 🔧 **Installation Advantage** - ✔ BNC connector pre-fitted - ✔ PL259 supplied loose 👉 Feed cable through walls or tight spaces, then fit the connector. --- ### 📡 **Perfect For** - Scanner antennas (BNC radios) - CB radio setups - Amateur (Ham) radio - CCTV systems - HF installations --- ### ⚙️ **Specifications** - Length: **20 Metres (65ft)** - Cable Type: **MIL-SPEC RG58** - Impedance: **50 Ohm** - Inner Conductor: **19 x 0.18mm Tinned Copper** - Dielectric: **2.95mm Solid PE** - Shielding: **95% Tinned Copper Braiding** - Outer Sheath: **4.95mm PVC** --- ### 🔬 **Why Tinned Copper?** ✔ **Up to 10x longer lifespan** ✔ **Excellent corrosion resistance** ✔ **Ideal for outdoor & marine use** ✔ **Consistent signal performance** 👉 Perfect for **aerial and radio applications**. --- ### ⚠️ **Important Notes** ❗ PL259 connector is **supplied loose** unless requested fitted ❗ Ensure compatibility with your equipment --- ### 📦 **Other Options Available** 👉 Check our shop for: - 10m & 20m lengths - RG8X (Mini8) low loss cable - Connectors & adaptors --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Antennas & mounts - SWR meters & tuning tools - CB & Ham radio accessories --- ### 🔥 **Order Today** **Long run. Low loss. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-terminated-with-male-bnc-and-lose-pl259/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-terminated-with-male-bnc-and-lose-pl259/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-terminated-with-male-bnc-and-lose-pl259/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-terminated-with-male-bnc-and-lose-pl259/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg58%2020m%2065%20foot%20high%20quality%20Mil%20Spec%20terminated%20with%20male%20BNC%20and%20lose%20pl259&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-20m-65-foot-high-quality-mil-spec-terminated-with-male-bnc-and-lose-pl259%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-terminated-with-male-bnc-and-lose-pl259/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-terminated-with-male-bnc-and-lose-pl259/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-20m-65-foot-high-quality-mil-spec-terminated-with-male-bnc-and-lose-pl259/?share=telegram) - **Product categories:** RG58 --- ### [MINI8 100m Drum of High Quality Black LOW LOSS 50 Ohm Cable CB HAM Radio](https://cbradio.co.uk/product/rg8-mini8-100m-drum-of-high-quality-black-low-loss-50-ohm-cable-cb-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **100m RG8X Mini8 Low Loss Coax Cable – 50 Ohm – Flexible – CB / Ham / RF Install** **Long Run • Low Loss • Flexible Performance Cable** This **100 metre RG8X (Mini8) coax cable** is a **high-quality low loss solution**, ideal for **long cable runs** where performance and flexibility matter. 👉 Offers **similar electrical performance to RG213**, but with the **slimmer, more flexible size of RG58**. --- ### 💪 **Why Choose RG8X (Mini8)** ✔ **Low Loss Performance** – ideal for longer runs ✔ **Slim & Flexible (6.1mm)** – easy routing ✔ **High Quality Construction** ✔ **Suitable for Multiple RF Applications** 👉 The perfect balance of **performance and usability**. --- ### ✅ **Key Features** ✔ **100 Metre Reel / Length** ✔ **50 Ohm Impedance** ✔ **Foam Polyethylene Dielectric** ✔ **Stranded Copper Core** ✔ **95% Copper Braided Shielding** ✔ **Low Smoke PVC Outer Jacket** --- ### 📡 **Perfect For** - CB Radio installations - Amateur (Ham) radio - Base station setups - Long antenna runs - CCTV & RF systems --- ### ⚙️ **Technical Specifications** - Cable Type: **RG8X / Mini8** - Length: **100 Metres** - Impedance: **50 Ohm** - Diameter: **6.1mm** - Capacitance: **80 pF/m** - Velocity Ratio: **80%** - Shielding: **95% Copper Braid** - Screening Effectiveness: **>55dB (100–900 MHz)** --- ### 📉 **Attenuation (dB per 100m)** - 50 MHz: **7.2 dB** - 100 MHz: **10.5 dB** - 400 MHz: **22.2 dB** - 600 MHz: **27.6 dB** - 860 MHz: **33.9 dB** - 1000 MHz: **37.0 dB** - 2400 MHz: **64.5 dB** --- ### 💡 **Why This Cable is Better** Compared to standard RG58: ✔ Lower signal loss ✔ Better shielding ✔ More suitable for longer runs Compared to RG213: ✔ Much more flexible ✔ Easier to install 👉 A **popular choice for professional installations**. --- ### ⚠️ **Important Notes** ❗ Cable supplied **without connectors** ❗ Ensure correct connectors (PL259 etc.) for your setup --- ### 📦 **Other Lengths Available** 👉 Check our shop for: - 10m / 15m / 20m / 25m / 30m / 40m - Pre-terminated cables - Connectors & adaptors --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready for installation --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PL259 connectors - Antennas & mounts - SWR meters & tools - CB & Ham radio gear --- ### 🔥 **Order Today** **Long runs. Low loss. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg8-mini8-100m-drum-of-high-quality-black-low-loss-50-ohm-cable-cb-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg8-mini8-100m-drum-of-high-quality-black-low-loss-50-ohm-cable-cb-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg8-mini8-100m-drum-of-high-quality-black-low-loss-50-ohm-cable-cb-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg8-mini8-100m-drum-of-high-quality-black-low-loss-50-ohm-cable-cb-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MINI8%20100m%20Drum%20of%20High%20Quality%20Black%20LOW%20LOSS%2050%20Ohm%20Cable%20CB%20HAM%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg8-mini8-100m-drum-of-high-quality-black-low-loss-50-ohm-cable-cb-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg8-mini8-100m-drum-of-high-quality-black-low-loss-50-ohm-cable-cb-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg8-mini8-100m-drum-of-high-quality-black-low-loss-50-ohm-cable-cb-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg8-mini8-100m-drum-of-high-quality-black-low-loss-50-ohm-cable-cb-ham-radio/?share=telegram) - **Product categories:** RG8 mini8 --- ### [mini8 15m 49' low loss 50Ohm coax cable 2 pl259 cb ham radio foam core](https://cbradio.co.uk/product/rg8x-15m-49-mini8-low-loss-50ohm-coax-cable-2-pl259-cb-ham-radio-foam-core/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 15m RG8 / Mini 8 Coax Cable – Low Loss – 50 Ohm – 95% Braid – CB HAM **Low Loss • Flexible • Built Properly** This is **15 metres of high quality RG8 (Mini 8) coax cable**, offering **low loss performance with flexibility similar to RG58**. 👉 Ideal for longer runs without sacrificing signal --- 🔥 **Why Choose This Cable** ✔ Low Loss Performance ✔ Foam Dielectric for Better Signal ✔ 95% Copper Braid Shielding ✔ Flexible Like RG58 ✔ One PL259 Plug Fitted 👉 Proper cable for proper installs --- 📦 **What’s Included** ✔ 15 Metres RG8 / Mini 8 Coax Cable ✔ 1x PL259 Connector (Fitted) 👉 Feed through first, then fit second plug if required --- 📡 **Perfect For** CB Radio HAM / Amateur Radio Base Stations Long Cable Runs 👉 Ideal upgrade from standard RG58 --- ⚙️ **Specifications** Impedance: 50 Ohm Inner Conductor: Plain Copper Dielectric: Foam Polyethylene Shielding: 95% Copper Braid Outer Sheath: Low Smoke PVC Diameter: 6.1mm Capacitance: 80 pF/m Velocity Ratio: 80% --- 📉 **Attenuation (dB/100m)** 50 MHz – 7.2 100 MHz – 10.5 400 MHz – 22.2 600 MHz – 27.6 860 MHz – 33.9 1000 MHz – 37.0 2400 MHz – 64.5 --- 💡 **Why This Cable Stands Out** ✔ Lower loss than RG58 ✔ Flexible and easy to route ✔ Strong shielding for clean signal ✔ Not cheap thin coax 👉 Don’t be fooled by low-grade alternatives --- 🔧 **Installation** ✔ Run cable through entry point ✔ Fit second PL259 if required ✔ Connect and go 👉 Clean, flexible install --- ⚠️ **Important Notes** ❗ Supplied with one plug fitted ❗ Contact us if you want both ends soldered ❗ Suitable for indoor & outdoor use --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: 10m / 20m / 25m / 30m / 40m lengths Connectors Aerials Radio accessories --- 🔥 **Order Today** **Lower loss. Better signal. Built right.** 📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg8x-15m-49-mini8-low-loss-50ohm-coax-cable-2-pl259-cb-ham-radio-foam-core/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg8x-15m-49-mini8-low-loss-50ohm-coax-cable-2-pl259-cb-ham-radio-foam-core/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg8x-15m-49-mini8-low-loss-50ohm-coax-cable-2-pl259-cb-ham-radio-foam-core/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg8x-15m-49-mini8-low-loss-50ohm-coax-cable-2-pl259-cb-ham-radio-foam-core/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mini8%2015m%2049%27%20low%20loss%2050Ohm%20coax%20cable%202%20pl259%20cb%20ham%20radio%20foam%20core&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg8x-15m-49-mini8-low-loss-50ohm-coax-cable-2-pl259-cb-ham-radio-foam-core%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg8x-15m-49-mini8-low-loss-50ohm-coax-cable-2-pl259-cb-ham-radio-foam-core/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg8x-15m-49-mini8-low-loss-50ohm-coax-cable-2-pl259-cb-ham-radio-foam-core/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg8x-15m-49-mini8-low-loss-50ohm-coax-cable-2-pl259-cb-ham-radio-foam-core/?share=telegram) - **Product categories:** RG8 mini8 --- ### [Mini8 5M Coax Cable 2x PL259 Plugs Fitted rg8](https://cbradio.co.uk/product/mini8-coax-cable-5m-2x-pl259-plugs-fitted-rg8/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini-8 RG8 5m Coax Cable with 2x PL259** is a **high-quality low loss 50Ω coax lead**, supplied with **PL259 connectors fitted on both ends** for a **plug-and-play installation**. Perfect for **mobile setups, patch leads, or short base station runs**. --- ## 🔌 Ready to Use – No Soldering Needed ✔ **2 x PL259 connectors fitted** ✔ Plug straight into radio and antenna ✔ No tools or setup required --- ## 📡 Low Loss Performance ✔ Better signal performance than standard RG58 ✔ Reduced loss over distance ✔ Ideal for clean transmission --- ## 🔧 Flexible Mini-8 Design ✔ Slim and easy to route ✔ More flexible than RG213 ✔ Ideal for tight installations --- ## 📏 5 Metre Length ✔ Perfect for short runs ✔ Ideal for: - Mobile installs - Patch leads - Nearby antenna setups --- ## 📻 Multi-Use Applications Suitable for: - CB radio - Amateur (ham) radio - Scanner systems --- ## 💪 Quality Construction ✔ Copper conductor ✔ Low loss dielectric ✔ Shielded to reduce interference --- ## 🔁 Other Options Available ✔ Other lengths available (10m, 15m, 20m+) ✔ RG58 and RG213 also available --- ## Key Features - Mini-8 RG8 coax cable - 5 metre length - Low loss 50 Ohm - 2 x PL259 connectors fitted - Flexible and durable --- ## Why Choose This Cable? ✔ Plug-and-play convenience ✔ Better performance than RG58 ✔ Compact and easy to install ✔ Reliable quality --- ## Ideal For - Mobile CB installations - Short antenna runs - Patch/jumper leads - Compact setups --- ## Straight Talking If you want a **short coax lead that just plugs in and works properly**, this is it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini8-coax-cable-5m-2x-pl259-plugs-fitted-rg8/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini8-coax-cable-5m-2x-pl259-plugs-fitted-rg8/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini8-coax-cable-5m-2x-pl259-plugs-fitted-rg8/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini8-coax-cable-5m-2x-pl259-plugs-fitted-rg8/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini8%205M%20Coax%20Cable%202x%20PL259%20Plugs%20Fitted%20rg8&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini8-coax-cable-5m-2x-pl259-plugs-fitted-rg8%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini8-coax-cable-5m-2x-pl259-plugs-fitted-rg8/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini8-coax-cable-5m-2x-pl259-plugs-fitted-rg8/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini8-coax-cable-5m-2x-pl259-plugs-fitted-rg8/?share=telegram) - **Product categories:** Patch Leads --- ### [Mini8 5M Coax Cable only](https://cbradio.co.uk/product/mini8-coax-cable-5m-rg8/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini-8 RG8 5m Coax Cable** is a **high-quality low loss 50Ω coax**, perfect for **short cable runs where flexibility and performance matter**. Ideal for **mobile installs, patch leads, or compact base setups**. --- ## 📡 Low Loss Performance ✔ Better performance than standard RG58 ✔ Reduced signal loss ✔ Ideal for clean signal transmission --- ## 🔧 Flexible Mini-8 Design ✔ Slim and easy to route ✔ More flexible than RG213 ✔ Perfect for tight installs --- ## 📏 5 Metre Length ✔ Ideal for short runs ✔ Great for: - Mobile installs - Patch connections - Nearby antenna setups --- ## 📻 Multi-Use Cable Suitable for: - CB radio - Amateur (ham) radio - Scanner systems --- ## 💪 Quality Construction ✔ Copper conductor ✔ Low loss dielectric ✔ Shielded for reduced interference --- ## 🔁 Other Lengths Available ✔ 5m / 10m / 15m / 20m / 25m / 30m / 40m ✔ RG58 and RG213 also available --- ## Key Features - Mini-8 RG8 coax cable - 5 metre length - Low loss 50 Ohm - Flexible design - Multi-use applications --- ## Why Choose This Cable? ✔ Compact and easy to install ✔ Better performance than RG58 ✔ Ideal for short runs ✔ Reliable quality --- ## Ideal For - Mobile CB installs - Short antenna runs - Patch leads - Compact radio setups --- ## Straight Talking If you just need a **short, decent coax that performs properly**, this is spot on. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini8-coax-cable-5m-rg8/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini8-coax-cable-5m-rg8/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini8-coax-cable-5m-rg8/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini8-coax-cable-5m-rg8/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini8%205M%20Coax%20Cable%20only&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini8-coax-cable-5m-rg8%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini8-coax-cable-5m-rg8/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini8-coax-cable-5m-rg8/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini8-coax-cable-5m-rg8/?share=telegram) - **Product categories:** RG8 mini8 --- ### [mini8 40m low loss coax rg-8 2 pl259](https://cbradio.co.uk/product/mini8-rg8-40m-low-loss-coax-rg-8-2-pl259-cb-or-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini-8 RG8 40m Coax Cable** is a **high-quality low loss 50 Ohm coax**, designed for **longer cable runs without the stiffness of traditional RG213**. Offering **excellent performance with a slimmer, flexible design**, it’s ideal for both **CB and amateur radio installations**. --- ## 📡 Low Loss Performance ✔ Comparable performance to RG213 ✔ Reduced signal loss over longer runs ✔ Ideal for base station setups --- ## 🔧 Flexible Mini-8 Design - Diameter similar to RG58 (**6.1mm**) - Much easier to route than RG213 - Perfect for tight spaces and installations ✔ Best of both worlds --- ## 🔌 Ready to Install ✔ **40 metre length** ✔ **One PL259 connector pre-soldered** ✔ Ideal for feeding through walls or conduits ➡️ Option to have both ends fitted on request --- ## 💪 High Quality Construction - **Stranded copper core** - **Foam polyethylene dielectric** - **95% copper braid shielding** ✔ Strong, flexible and efficient --- ## 📶 Excellent Shielding ✔ Effective screening from **100–900 MHz (>55 dB)** ✔ Reduces interference and signal noise --- ## ⚡ Technical Performance **Attenuation (dB per 100m):** - 50 MHz – 7.2 dB - 100 MHz – 10.5 dB - 400 MHz – 22.2 dB - 600 MHz – 27.6 dB - 1000 MHz – 37.0 dB ✔ Reliable across HF, VHF and UHF --- ## 📏 Designed for Longer Runs - Ideal for base stations - Perfect for home shack installs - Great for external antenna setups --- ## 🧵 Quality Materials Throughout ✔ Plain copper conductors ✔ Foam dielectric for lower loss ✔ Low smoke PVC outer sheath --- ## 🔁 Other Lengths Available ✔ 10m / 15m / 20m / 25m / 30m / 40m ✔ Custom options available --- ## Key Features - Mini-8 RG8 coax cable - 40 metre length - Low loss 50 Ohm - Flexible 6.1mm diameter - PL259 connector fitted --- ## Why Choose This Cable? ✔ Low loss without bulky cable ✔ Easy to install and route ✔ High quality materials ✔ Ideal for long runs --- ## Ideal For - CB radio base stations - Amateur radio setups - External antenna installations - Shack-to-antenna runs --- ## Straight Talking If you want **low loss performance without fighting stiff cable**, this is the one. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini8-rg8-40m-low-loss-coax-rg-8-2-pl259-cb-or-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini8-rg8-40m-low-loss-coax-rg-8-2-pl259-cb-or-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini8-rg8-40m-low-loss-coax-rg-8-2-pl259-cb-or-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini8-rg8-40m-low-loss-coax-rg-8-2-pl259-cb-or-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mini8%2040m%20low%20loss%20coax%20rg-8%202%20pl259&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini8-rg8-40m-low-loss-coax-rg-8-2-pl259-cb-or-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini8-rg8-40m-low-loss-coax-rg-8-2-pl259-cb-or-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini8-rg8-40m-low-loss-coax-rg-8-2-pl259-cb-or-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini8-rg8-40m-low-loss-coax-rg-8-2-pl259-cb-or-ham-radio/?share=telegram) - **Product categories:** RG8 mini8 --- ### [mini8 10m super low loss 50ohm coax cable rg-8 cable only](https://cbradio.co.uk/product/rg8x-mini8-10m-super-low-loss-50ohm-coax-cable-rg-8-cable-only/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **10m RG8X Mini8 Coax Cable – Low Loss 50 Ohm – RG8 Cable (No Plugs) – CB & Ham Radio** **Flexible, Low Loss & Built for Custom Installations** This **10 metre RG8X (Mini8) coax cable** is a **high-quality low-loss solution**, ideal for **CB, amateur radio, and custom antenna installations**. 👉 Supplied as **cable only – no connectors fitted**, giving you full flexibility for your setup. --- ### ✅ **Why Choose This Cable** ✔ **Low Loss Performance** – ideal for longer runs ✔ **Flexible Mini8 Design** – easy routing (RG58 size) ✔ **High Quality Construction** – built to last ✔ **50 Ohm Impedance** – perfect for radio use ✔ **Similar Performance to RG213UBX** --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Base Stations - Mobile Setups - Custom Cable Builds --- ### ⚙️ **Specifications** - Length: **10 Metres** - Cable Type: **RG8X / Mini8** - Impedance: **50 Ohm** - Inner Conductor: **Plain Copper** - Dielectric: **Foam Polyethylene** - Shielding: **Copper Braid** - Outer Sheath: **Low Smoke PVC** - Diameter: **6.1mm** - Capacitance: **80 pF/m** - Velocity Factor: **80%** - Screening Effectiveness: **>55 dB (100–900 MHz)** --- ### 📉 **Attenuation (dB / 100m)** - 50 MHz – **7.2 dB** - 100 MHz – **10.5 dB** - 400 MHz – **22.2 dB** - 600 MHz – **27.6 dB** - 860 MHz – **33.9 dB** - 1000 MHz – **37.0 dB** - 2400 MHz – **64.5 dB** --- ### 💡 **Why Use Mini8 (RG8X)?** - Near **RG213 performance** - Much **thinner & more flexible (RG58 size)** - Easier installation with **low signal loss** 👉 Ideal balance of **performance + usability**. --- ### ⚠️ **Important Note** ❗ **No connectors included** 👉 See our shop for **PL259 plugs or pre-made leads** --- ### 📦 **Other Lengths Available** 👉 Check our shop for: **10m • 15m • 20m • 25m • 30m • 40m** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to cut & terminate --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PL259 connectors - Antennas & mounts - SWR meters & tuning tools - Full CB radio kits --- ### 🔥 **Order Today** **Low loss. High quality. Built for custom installs.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg8x-mini8-10m-super-low-loss-50ohm-coax-cable-rg-8-cable-only/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg8x-mini8-10m-super-low-loss-50ohm-coax-cable-rg-8-cable-only/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg8x-mini8-10m-super-low-loss-50ohm-coax-cable-rg-8-cable-only/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg8x-mini8-10m-super-low-loss-50ohm-coax-cable-rg-8-cable-only/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mini8%2010m%20super%20low%20loss%2050ohm%20coax%20cable%20rg-8%20cable%20only&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg8x-mini8-10m-super-low-loss-50ohm-coax-cable-rg-8-cable-only%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg8x-mini8-10m-super-low-loss-50ohm-coax-cable-rg-8-cable-only/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg8x-mini8-10m-super-low-loss-50ohm-coax-cable-rg-8-cable-only/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg8x-mini8-10m-super-low-loss-50ohm-coax-cable-rg-8-cable-only/?share=telegram) - **Product categories:** RG8 mini8 --- ### [MINI8 10m Super low loss 50 OHM coax cable with 2 pl259 plugs](https://cbradio.co.uk/product/rg8-10m-mini8-super-low-loss-50-ohm-coax-cable-with-2-pl259-plugs/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **10m RG8X Mini8 Low Loss Coax Cable – 50 Ohm – 2x PL259 – CB & Ham Radio Lead** **Flexible, Low Loss & Built for Performance** This **10 metre RG8X (Mini8) coax cable** is a **premium low-loss solution** for CB and amateur radio users, offering **excellent performance with the flexibility of thinner cable**. 👉 Supplied with **2 x PL259 plugs** *(one fitted, one supplied loose – or both fitted on request)*. --- ### ✅ **Why This Cable is a Top Choice** ✔ **Low Loss Performance** – ideal for longer runs ✔ **Flexible Mini8 Design** – easy routing (RG58 size) ✔ **High Quality Construction** – built to last ✔ **Custom Assembly Option** – both plugs fitted on request ✔ **Similar Performance to RG213UBX** --- ### 🔧 **Custom Build Option** - ✔ **1 x PL259 pre-fitted** - ✔ **1 x PL259 supplied loose** 👉 Want both ends fitted? Just let us know – we’ll solder it for you. --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Base Stations - Mobile Setups - Long Cable Runs --- ### ⚙️ **Specifications** - Length: **10 Metres** - Cable Type: **RG8X / Mini8** - Impedance: **50 Ohm** - Inner Conductor: **Plain Copper** - Dielectric: **Foam Polyethylene** - Shield: **Copper Braid** - Outer Sheath: **Low Smoke PVC** - Diameter: **6.1mm** - Capacitance: **80 pF/m** - Velocity Factor: **80%** - Screening Effectiveness: **>55 dB (100–900 MHz)** --- ### 📉 **Attenuation (dB / 100m)** - 50 MHz – **7.2 dB** - 100 MHz – **10.5 dB** - 400 MHz – **22.2 dB** - 600 MHz – **27.6 dB** - 860 MHz – **33.9 dB** - 1000 MHz – **37.0 dB** - 2400 MHz – **64.5 dB** --- ### 💡 **Why Choose Mini8 (RG8X)?** - Near **RG213 performance** - Much **thinner & more flexible (RG58 size)** - Easier installation with **low signal loss** 👉 Ideal balance of **performance + usability**. --- ### 📦 **Other Lengths Available** 👉 Check our shop for: **10m • 15m • 20m • 25m • 30m • 40m** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Antennas & mounts - PL259 connectors - SWR meters & tuning tools - Full CB radio kits --- ### 🔥 **Order Today** **Low loss. High quality. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg8-10m-mini8-super-low-loss-50-ohm-coax-cable-with-2-pl259-plugs/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg8-10m-mini8-super-low-loss-50-ohm-coax-cable-with-2-pl259-plugs/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg8-10m-mini8-super-low-loss-50-ohm-coax-cable-with-2-pl259-plugs/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg8-10m-mini8-super-low-loss-50-ohm-coax-cable-with-2-pl259-plugs/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MINI8%2010m%20Super%20low%20loss%2050%20OHM%20coax%20cable%20with%202%20pl259%20plugs&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg8-10m-mini8-super-low-loss-50-ohm-coax-cable-with-2-pl259-plugs%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg8-10m-mini8-super-low-loss-50-ohm-coax-cable-with-2-pl259-plugs/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg8-10m-mini8-super-low-loss-50-ohm-coax-cable-with-2-pl259-plugs/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg8-10m-mini8-super-low-loss-50-ohm-coax-cable-with-2-pl259-plugs/?share=telegram) - **Product categories:** RG8 mini8 --- ### [White Tornado stinger springer 1.55m cb antenna aerial](https://cbradio.co.uk/product/moonraker-tornado-stinger-springer-1-55m-cb-antenna-aerial-black/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚛 **Tornado Stinger Springer CB Antenna – 1.58m (5ft) – 3/8 Heavy Duty Mobile Aerial 27MHz** **Tough • Flexible • Proven Performance** The **Tornado Stinger Springer** is one of the **most popular CB antennas on the road**, trusted by **truckers, 4×4 owners, and caravan users** for its **strength and reliability**. 👉 Built with a **base-loaded open coil design**, this antenna is made to handle **real-world conditions**. --- ### 🔥 **Why Choose the Tornado Stinger** ✔ **Heavy Duty Open Coil Springer Design** ✔ **Pre-Tuned – No Adjustment Needed** ✔ **Flexible Whip – Handles Impacts** ✔ **Strong Signal Performance** ✔ **Built for Harsh Environments** --- ### 📡 **Performance Highlights** - Covers **27–28 MHz CB band** - **Low VSWR ≤ 1.5:1** - **High power handling up to 1000W** 👉 Delivers **consistent transmit and receive performance**. --- ### 🚛 **Perfect For** - Trucks & HGVs - 4×4 & off-road vehicles - Land Rover setups - Caravans & motorhomes - Agricultural machinery --- ### ⚙️ **Specifications** - Type: **Base Loaded Springer CB Antenna** - Frequency: **27–28 MHz** - Length: **158 cm (5ft approx.)** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 1000 Watts** - Fitting: **Standard 3/8 Thread** --- ### 💡 **Why Springers Are So Popular** ✔ Flexible design absorbs knocks ✔ Ideal for low branches & rough terrain ✔ Strong and long-lasting ✔ Trusted by professional drivers 👉 A true **workhorse antenna**. --- ### 🔧 **Installation Tips** ✔ Use a **3/8 mount** ✔ Ensure good grounding for best performance ✔ Mount in a high, clear position if possible --- ### ⚠️ **Important Notes** ❗ Requires **3/8 mount & coax cable** ❗ Height clearance should be considered --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - 3/8 mounts & brackets - Coax cable & connectors - SWR meters & tuning tools - CB radios --- ### 🔥 **Order Today** **Strong. Flexible. Built for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/moonraker-tornado-stinger-springer-1-55m-cb-antenna-aerial-black/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/moonraker-tornado-stinger-springer-1-55m-cb-antenna-aerial-black/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/moonraker-tornado-stinger-springer-1-55m-cb-antenna-aerial-black/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/moonraker-tornado-stinger-springer-1-55m-cb-antenna-aerial-black/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20White%20Tornado%20stinger%20springer%201.55m%20cb%20antenna%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmoonraker-tornado-stinger-springer-1-55m-cb-antenna-aerial-black%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/moonraker-tornado-stinger-springer-1-55m-cb-antenna-aerial-black/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/moonraker-tornado-stinger-springer-1-55m-cb-antenna-aerial-black/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/moonraker-tornado-stinger-springer-1-55m-cb-antenna-aerial-black/?share=telegram) - **Product categories:** Long Stingers --- ### [Orange long XL Stinger Antenna Springer Orbitor Rugged full size 4x4 CB radio Aerial](https://cbradio.co.uk/product/orange-xl-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🟠🚛 **Orange XL Stinger CB Aerial 1.55m – Full Size Springer Antenna – 27MHz 4×4 Trucker – 1000W** **Full Size Power – Built for Tough Conditions** The **Orange XL Stinger (Full Size Springer) CB Aerial** is a **heavy-duty, high-performance antenna**, trusted by **truckers, off-roaders, and farmers** for its **strength, flexibility, and reliability**. 👉 Designed for maximum visibility, durability, and performance in demanding environments. --- ### ✅ **Why This Antenna is So Popular** ✔ **Pre-Tuned CB Antenna (27–28 MHz)** – ready to install ✔ **Heavy Duty Open Coil Design** – absorbs knocks & vibration ✔ **Flexible Stainless Steel Whip** – built for real-world use ✔ **Full Size 1.55m Design** – improved performance & range ✔ **Virtually Indestructible Construction** ✔ **Quality British Made 🇬🇧** --- ### 🚜 **Perfect For** - Trucks / HGVs - 4×4 & Off-Road Vehicles - Agricultural Machinery - Pickup Trucks - Daily CB Use --- ### 📡 **Performance You Can Trust** - Covers full **27–28 MHz CB band (80 channels)** - **Low VSWR (1.5:1 or better)** for efficient transmission - Designed for **stable communication in harsh conditions** --- ### ⚙️ **Specifications** - Model: **XL Stinger / Full Size Springer Aerial** - Frequency: **27–28 MHz** - Length: **1.55 Metres** - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8” Male Thread** - Design: **Open Coil Springer** - Whip Material: **Stainless Steel** - Pre-Tuned: **Yes** --- ### ⚠️ **Don’t Buy Cheap Copies** Lower quality antennas: - Snap or bend easily - Perform poorly - Don’t last 👉 This is a **proven heavy-duty aerial used by professionals**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 🎨 **More Colours Available** 👉 Check our shop for: - Black - Red - Blue - Yellow - Green & more --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mounts (mag, mirror, boot mounts) - Coax cable & connectors - SWR meters & tuning tools - CB radios & accessories --- ### 🔥 **Order Today** **Full size. Full strength. Built for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/orange-xl-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/orange-xl-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/orange-xl-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/orange-xl-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Orange%20long%20XL%20Stinger%20Antenna%20Springer%20Orbitor%20Rugged%20full%20size%204x4%20CB%20radio%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Forange-xl-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/orange-xl-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/orange-xl-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/orange-xl-stinger-antenna-springer-orbitor-rugged-full-size-4x4-cb-radio-aerial/?share=telegram) - **Product categories:** Long Stingers --- ### [Red Long Tornado stinger springer CB Radio Antenna 1.55m Aerial XL](https://cbradio.co.uk/product/large-red-tornado-stinger-springer-cb-radio-antenna-1-55m-aerial-xl/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔴🚛 **Red Tornado XL Springer CB Antenna 1.55m – Heavy Duty Stinger Aerial – 1000W – 3/8 Mount** **Stand Out & Stay Connected – Built for Serious CB Users** The **Red Tornado XL Springer CB Aerial** combines **eye-catching looks with heavy-duty performance**, making it a top choice for **truckers, off-roaders, and commercial users** who want both **style and reliability**. With its **bold red coil and stainless steel whip**, this antenna doesn’t just perform — it stands out. --- ### ✅ **Why This Antenna is So Popular** ✔ **Heavy Duty Open Coil Design** – absorbs knocks, vibration & flex ✔ **Striking Red “Tornado” Coil** – stands out from standard antennas ✔ **Flexible Stainless Steel Whip** – ideal for tough environments ✔ **Pre-Tuned for CB (27–28 MHz)** – quick & easy installation ✔ **Handles up to 1000 Watts** – strong, reliable performance ✔ **Quality British Made** – dependable supply & build quality --- ### 🚜 **Perfect For** - Truckers / HGV Drivers - 4×4 & Off-Road Vehicles - Farmers & Agricultural Use - Pickup Trucks - Commercial & Fleet Vehicles --- ### 📡 **Built for Real-World Performance** - Covers **full UK/EU 80 channel CB band (27–28 MHz)** - **Low SWR (~1.5:1)** for efficient transmission - Designed to maintain signal even in harsh conditions --- ### ⚙️ **Specifications** - Antenna Type: **1/4 Wave Base Loaded Mobile Antenna** - Frequency: **27–28 MHz (Full 80 Channel Coverage)** - Power Handling: **Up to 1000 Watts** - Length: **1.55 Metres (XL Size)** - Coil Length: **150mm** - Coil Diameter: **50mm** - Impedance: **50 Ohms** - SWR: **Approx. 1.5:1** - Mount Type: **3/8” UNF** - Whip Material: **17/7 PH Stainless Steel** - Coil Finish: **Red Tornado Style** --- ### ⚠️ **Don’t Buy Cheap Copies** Lower quality antennas often: - Snap under stress - Have poor tuning - Lose performance quickly 👉 This is a **proven heavy-duty design trusted by drivers daily**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - Heavy duty mounts (mag, mirror, boot mounts) - Coax cable (RG58 / RG8X / RG213) - SWR meters & tuning tools - CB radios & full kits --- ### 🔥 **Order Today** **Look the part. Perform even better. Built for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-red-tornado-stinger-springer-cb-radio-antenna-1-55m-aerial-xl/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-red-tornado-stinger-springer-cb-radio-antenna-1-55m-aerial-xl/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-red-tornado-stinger-springer-cb-radio-antenna-1-55m-aerial-xl/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-red-tornado-stinger-springer-cb-radio-antenna-1-55m-aerial-xl/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Red%20Long%20Tornado%20stinger%20springer%20CB%20Radio%20Antenna%201.55m%20Aerial%20XL&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-red-tornado-stinger-springer-cb-radio-antenna-1-55m-aerial-xl%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-red-tornado-stinger-springer-cb-radio-antenna-1-55m-aerial-xl/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-red-tornado-stinger-springer-cb-radio-antenna-1-55m-aerial-xl/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-red-tornado-stinger-springer-cb-radio-antenna-1-55m-aerial-xl/?share=telegram) - **Product categories:** Long Stingers --- ### [Chrome Long XL springer 1.55m CB radio aerial 1/4 wave reduced Tornado Stinger](https://cbradio.co.uk/product/black-xl-springer-1-55m-cb-radio-aerial-1-4-wave-reduced-tornado-stinger/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **XL Chrome Stinger CB Antenna** is a **full-size, high-performance springer aerial**, designed for **maximum range, durability, and visual impact**. With its **chrome finish and heavy-duty open coil design**, it’s a favourite among **truckers, off-roaders, and agricultural users**. --- ## 📡 Full Size Performance ✔ Length: **1.55m (5ft)** ✔ Better range than compact antennas ✔ Strong signal for long-distance communication --- ## 💪 Heavy Duty Springer Design - Open coil spring base - Flexible under impact - Absorbs knocks and vibration ✔ Built for harsh environments --- ## ✨ Chrome Finish ✔ Bright polished look ✔ Classic trucker style ✔ Stands out on any vehicle --- ## 🚛 Built for Tough Use Perfect for: - Trucks and lorries - 4×4 and off-road vehicles - Tractors and agricultural use - Work vans ✔ Handles branches, bumps and daily abuse --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Suitable for standard and high-power setups --- ## 🎯 Pre-Tuned Convenience ✔ Pre-set for **27–28 MHz (full CB band)** ✔ Quick and easy installation ✔ Minimal tuning required --- ## 🔩 Standard 3/8″ Fitting - Fits most CB mounts - Compatible with mirror, gutter and body mounts ✔ Universal compatibility --- ## 🇬🇧 Quality British Made ✔ Reliable construction ✔ Consistent supply ✔ Trusted by CB users --- ## Key Features - Full-size chrome springer CB antenna - 1.55m length (5ft) - Heavy duty open coil - 1000W power handling - 3/8″ thread fitting --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 1.55 m - **VSWR:** ≤ 1.5:1 - **Power:** 1000W - **Fitting:** 3/8″ male --- ## Why Choose This Antenna? ✔ Maximum performance ✔ Tough and flexible design ✔ Classic chrome styling ✔ Proven reliability --- ## Ideal For - Truck drivers - 4×4 enthusiasts - Farmers and contractors - High-performance CB setups --- ## Straight Talking If you want a **big antenna that performs and looks the part**, this is it. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/black-xl-springer-1-55m-cb-radio-aerial-1-4-wave-reduced-tornado-stinger/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/black-xl-springer-1-55m-cb-radio-aerial-1-4-wave-reduced-tornado-stinger/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/black-xl-springer-1-55m-cb-radio-aerial-1-4-wave-reduced-tornado-stinger/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/black-xl-springer-1-55m-cb-radio-aerial-1-4-wave-reduced-tornado-stinger/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Chrome%20Long%20XL%20springer%201.55m%20CB%20radio%20aerial%201%2F4%20wave%20reduced%20Tornado%20Stinger&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fblack-xl-springer-1-55m-cb-radio-aerial-1-4-wave-reduced-tornado-stinger%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/black-xl-springer-1-55m-cb-radio-aerial-1-4-wave-reduced-tornado-stinger/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/black-xl-springer-1-55m-cb-radio-aerial-1-4-wave-reduced-tornado-stinger/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/black-xl-springer-1-55m-cb-radio-aerial-1-4-wave-reduced-tornado-stinger/?share=telegram) - **Product categories:** Long Stingers --- ### [yellow Long Tornado stinger antenna springer 4x4 cb radio aerial](https://cbradio.co.uk/product/large-yellow-tornado-stinger-antenna-long-springer-ariel-4x4-cb-radio-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🟡🚛 **Yellow Tornado XL Springer CB Aerial 1.55m – Heavy Duty Stinger Antenna – 4×4 Tractor HGV – 1000W** **Maximum Visibility – Maximum Durability** The **Yellow Tornado XL Springer CB Aerial** is built for those who want **rugged performance with high visibility**, making it ideal for **working vehicles, off-road use, and commercial environments**. With its **bright yellow coil and flexible stainless steel whip**, this antenna is designed to **stand out and withstand tough conditions**. --- ### ✅ **Why This Antenna is a Top Choice** ✔ **Heavy Duty Springer Design** – absorbs knocks, shocks & vibration ✔ **High-Visibility Yellow Coil** – perfect for working environments ✔ **Flexible Stainless Steel Whip** – built for off-road & daily use ✔ **Pre-Tuned (Ready to Fit)** – quick installation ✔ **Handles up to 1000 Watts** – powerful performance ✔ **Quality British Made** – reliable & consistent supply --- ### 🚜 **Perfect For** - 4×4 & Off-Road Vehicles - Tractors & Agricultural Machinery - Trucks / HGVs - Pickup Trucks - Commercial & Fleet Vehicles --- ### 📡 **Reliable CB Performance** - Covers full **27–28 MHz CB band (UK/EU 80 channels)** - **Low VSWR (1.5:1 or better)** for efficient signal transfer - Designed for **clear, dependable communication** in harsh conditions --- ### ⚙️ **Specifications** - Model: **XL Yellow Tornado Springer / Stinger Aerial** - Frequency: **27–28 MHz** - Length: **155cm (1.55m)** - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8” Male** - Design: **Open Coil Springer** - Whip Material: **Stainless Steel** - Pre-Tuned: **Yes** --- ### 🎨 **More Colours Available** 👉 Check our other listings for: - Red Tornado - Blue - Black - Stainless Steel - **British Racing Green (NEW)** --- ### ⚠️ **Don’t Risk Cheap Alternatives** Low-quality antennas: - Snap under stress - Perform poorly - Need replacing quickly 👉 This is a **proven, heavy-duty aerial trusted by professionals**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Don’t forget to check our store for: - Mounts (mag, mirror, boot mounts) - Coax cable (RG58 / RG8X / RG213) - SWR meters & tuning tools - CB radios & accessories --- ### 🔥 **Order Today** **High visibility. Heavy duty. Built to perform.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-yellow-tornado-stinger-antenna-long-springer-ariel-4x4-cb-radio-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-yellow-tornado-stinger-antenna-long-springer-ariel-4x4-cb-radio-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-yellow-tornado-stinger-antenna-long-springer-ariel-4x4-cb-radio-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-yellow-tornado-stinger-antenna-long-springer-ariel-4x4-cb-radio-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20yellow%20Long%20Tornado%20stinger%20antenna%20springer%204x4%20cb%20radio%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-yellow-tornado-stinger-antenna-long-springer-ariel-4x4-cb-radio-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-yellow-tornado-stinger-antenna-long-springer-ariel-4x4-cb-radio-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-yellow-tornado-stinger-antenna-long-springer-ariel-4x4-cb-radio-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-yellow-tornado-stinger-antenna-long-springer-ariel-4x4-cb-radio-aerial/?share=telegram) - **Product categories:** Long Stingers --- ### [blue Long XL stinger antenna long springer ariel rugged 4x4 cb radio aerial](https://cbradio.co.uk/product/large-blue-xl-stinger-antenna-long-springer-ariel-rugged-4x4-cb-radio-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔵🚛 **Blue XL Springer CB Aerial 1.55m – Heavy Duty Stinger Antenna – 4×4 Tractor HGV – 1000W** **Stand Out on the Road – Built for Tough Use** The **Blue XL Springer CB Aerial** combines **rugged performance with standout style**, making it a top choice for **truckers, off-roaders, and agricultural vehicles**. With its **bold blue coil and flexible stainless steel whip**, this antenna is designed to handle **real working conditions** while delivering **strong, reliable CB performance**. --- ### ✅ **Why This Antenna is So Popular** ✔ **Heavy Duty Springer Design** – absorbs knocks, vibration & flex ✔ **Striking Blue Coil Finish** – stand out from standard antennas ✔ **Flexible Stainless Steel Whip** – perfect for rough environments ✔ **Pre-Tuned (Ready to Fit)** – quick installation ✔ **Handles up to 1000 Watts** – excellent performance ✔ **Quality British Made** – reliable supply & durability --- ### 🚜 **Perfect For** - 4×4 & Off-Road Vehicles - Tractors & Agricultural Use - Trucks / HGVs - Pickup Trucks - Commercial Vehicles --- ### 📡 **Reliable Performance** - Covers full **27–28 MHz CB band (UK/EU 80 channels)** - **Low VSWR (1.5:1 or better)** for efficient transmission - Designed for **clear communication in tough conditions** --- ### ⚙️ **Specifications** - Model: **XL Blue Springer / Stinger Aerial** - Frequency: **27–28 MHz** - Length: **155cm (1.55m)** - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8” Male** - Design: **Open Coil Springer** - Whip Material: **Stainless Steel** - Pre-Tuned: **Yes** --- ### 🎨 **More Colours Available** 👉 Check our other listings for: - Red Tornado - Stainless Steel - Black - **British Racing Green (NEW)** --- ### ⚠️ **Avoid Cheap Copies** Lower quality antennas: - Snap or bend easily - Have poor signal performance - Don’t last 👉 This is a **proven heavy-duty design trusted by drivers daily**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Don’t forget to check our store for: - Mounts (mag, mirror, boot mounts) - Coax cable (RG58 / RG8X / RG213) - SWR meters & tuning tools - CB radios & accessories --- ### 🔥 **Order Today** **Built tough. Looks the part. Performs every time.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-blue-xl-stinger-antenna-long-springer-ariel-rugged-4x4-cb-radio-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-blue-xl-stinger-antenna-long-springer-ariel-rugged-4x4-cb-radio-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-blue-xl-stinger-antenna-long-springer-ariel-rugged-4x4-cb-radio-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-blue-xl-stinger-antenna-long-springer-ariel-rugged-4x4-cb-radio-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20blue%20Long%20XL%20stinger%20antenna%20long%20springer%20ariel%20rugged%204x4%20cb%20radio%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-blue-xl-stinger-antenna-long-springer-ariel-rugged-4x4-cb-radio-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-blue-xl-stinger-antenna-long-springer-ariel-rugged-4x4-cb-radio-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-blue-xl-stinger-antenna-long-springer-ariel-rugged-4x4-cb-radio-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-blue-xl-stinger-antenna-long-springer-ariel-rugged-4x4-cb-radio-aerial/?share=telegram) - **Product categories:** Long Stingers --- ### [green Long XL tornado stinger large springer Orbitor full size 4x4 CB radio aerial](https://cbradio.co.uk/product/green-xl-tornado-stinger-large-springer-orbitor-full-size-4x4-cb-radio-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **XL Green Springer Stinger CB Antenna** is a **full-size, heavy-duty aerial**, built for **maximum durability and strong performance**. With its **open coil springer base and stainless steel whip**, this antenna is **virtually indestructible** — making it a top choice for **truckers, off-roaders, and farmers**. --- ## 📡 Full Size Performance ✔ Length: **1.55m (5ft)** ✔ Improved transmit and receive range ✔ Stronger signal compared to shorter antennas --- ## 💪 Heavy Duty Springer Design - Open coil spring base - Flexes under impact - Handles vibration and rough terrain ✔ Built for harsh environments --- ## Distinctive GREEN Finish ✔ Stands out from standard black aerials ✔ Popular for custom builds ✔ Easy to spot in use --- ## 🚜 Built for Tough Use Perfect for: - 4×4 and off-road vehicles - Trucks and lorries - Agricultural machinery - Work vans ✔ Handles branches, bumps and daily abuse --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Suitable for standard and high-power setups --- ## 🎯 Pre-Tuned for Convenience ✔ Tuned for **27–28 MHz CB band** ✔ Ready to install ✔ Minimal adjustment required --- ## 🔩 Standard 3/8″ Fitting ✔ Fits most CB antenna mounts ✔ Compatible with mirror, gutter, body and mag mounts --- ## 🇬🇧 Quality British Made ✔ Reliable construction ✔ Consistent quality ✔ Proven design --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 1.55m - **VSWR:** ≤ 1.5:1 - **Power:** 1000W - **Fitting:** 3/8″ male --- ## Key Features - Full-size springer CB antenna - 1.55m (5ft) length - Heavy duty open coil - Green high-visibility finish - 3/8″ thread fitting --- ## Why Choose This Antenna? ✔ Tough and flexible ✔ Strong signal performance ✔ Easy to install ✔ Built to last --- ## Ideal For - Off-road enthusiasts - Truck drivers - Farmers and contractors - Everyday CB use --- ## Straight Talking If you want a **big, tough aerial that won’t let you down**, this is it. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/green-xl-tornado-stinger-large-springer-orbitor-full-size-4x4-cb-radio-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/green-xl-tornado-stinger-large-springer-orbitor-full-size-4x4-cb-radio-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/green-xl-tornado-stinger-large-springer-orbitor-full-size-4x4-cb-radio-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/green-xl-tornado-stinger-large-springer-orbitor-full-size-4x4-cb-radio-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20green%20Long%20XL%20tornado%20stinger%20large%20springer%20Orbitor%20full%20size%204x4%20CB%20radio%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fgreen-xl-tornado-stinger-large-springer-orbitor-full-size-4x4-cb-radio-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/green-xl-tornado-stinger-large-springer-orbitor-full-size-4x4-cb-radio-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/green-xl-tornado-stinger-large-springer-orbitor-full-size-4x4-cb-radio-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/green-xl-tornado-stinger-large-springer-orbitor-full-size-4x4-cb-radio-aerial/?share=telegram) - **Product categories:** Long Stingers --- ### [Black Mini Stinger 4x4 CB Radio aerial trucker 80 springer small Orbitor](https://cbradio.co.uk/product/black-stinger-4x4-cb-radio-aerial-trucker-80-mini-springer-small-orbitor/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚫🚛 **Black Mini Stinger CB Aerial 89cm – Mini Springer Antenna – 27MHz 4×4 Trucker – 1000W** **Compact Size – Heavy Duty Performance** The **Black Mini Stinger (Mini Springer) CB Aerial** is one of the **most popular compact trucker antennas**, delivering **rugged durability, flexibility, and reliable performance** in a shorter, practical design. 👉 Ideal for vehicles where height is limited but strength and performance still matter. --- ### ✅ **Why This Antenna is So Popular** ✔ **Pre-Tuned CB Antenna (27–28 MHz)** – ready to install ✔ **Heavy Duty Open Coil Design** – absorbs knocks & vibration ✔ **Flexible Stainless Steel Whip** – built for tough environments ✔ **Compact Size (89cm)** – perfect for everyday use ✔ **Virtually Indestructible Build** ✔ **Quality British Made 🇬🇧** --- ### 🚜 **Perfect For** - 4×4 & Off-Road Vehicles - Trucks / HGVs - Agricultural Machinery - Pickup Trucks - Daily CB Use --- ### 📡 **Reliable Performance** - Covers full **27–28 MHz CB band (80 channels)** - **Low VSWR (1.5:1 or better)** for efficient transmission - Designed for **stable communication in harsh conditions** --- ### ⚙️ **Specifications** - Model: **Mini Stinger / Mini Springer Aerial** - Frequency: **27–28 MHz** - Length: **89cm (0.89m)** *(corrected from 0.89cm)* - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8” Male Thread** - Design: **Open Coil Springer** - Whip Material: **Stainless Steel** - Pre-Tuned: **Yes** --- ### 🎨 **More Colours Available** 👉 Check our shop for: - British Racing Green - Army Green - Desert Sand - Red, Blue & more --- ### ⚠️ **Don’t Buy Cheap Copies** Lower quality antennas: - Snap or bend easily - Perform poorly - Don’t last 👉 This is a **proven heavy-duty aerial trusted by working drivers**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mounts (mag, mirror, boot mounts) - Coax cable & connectors - SWR meters & tuning tools - CB radios & accessories --- ### 🔥 **Order Today** **Compact. Tough. Built for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/black-stinger-4x4-cb-radio-aerial-trucker-80-mini-springer-small-orbitor/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/black-stinger-4x4-cb-radio-aerial-trucker-80-mini-springer-small-orbitor/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/black-stinger-4x4-cb-radio-aerial-trucker-80-mini-springer-small-orbitor/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/black-stinger-4x4-cb-radio-aerial-trucker-80-mini-springer-small-orbitor/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Black%20Mini%20Stinger%204x4%20CB%20Radio%20aerial%20trucker%2080%20springer%20small%20Orbitor&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fblack-stinger-4x4-cb-radio-aerial-trucker-80-mini-springer-small-orbitor%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/black-stinger-4x4-cb-radio-aerial-trucker-80-mini-springer-small-orbitor/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/black-stinger-4x4-cb-radio-aerial-trucker-80-mini-springer-small-orbitor/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/black-stinger-4x4-cb-radio-aerial-trucker-80-mini-springer-small-orbitor/?share=telegram) - **Product categories:** Mini Stinger --- ### [White mini Springer 4x4 CB aerial trucker 80 stinger small Orbitor 90cm antenna](https://cbradio.co.uk/product/mini-springer-white-4x4-cb-aerial-trucker-80-stinger-small-orbitor-90cm-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚪🚛 **White Mini Springer CB Aerial 90cm – 27MHz Trucker Antenna – 4×4 Stinger – 1000W** **Compact Size – Heavy Duty Performance** The **White Mini Springer CB Aerial** is one of the **most popular compact trucker antennas**, offering **rugged durability, flexibility, and reliable performance** in a shorter 90cm design. 👉 Ideal for vehicles where height is limited but strength and performance are still essential. --- ### ✅ **Why This Antenna is So Popular** ✔ **Pre-Tuned CB Antenna (27–28 MHz)** – ready to install ✔ **Heavy Duty Open Coil Design** – absorbs knocks & vibration ✔ **Flexible Stainless Steel Whip** – built for tough environments ✔ **Compact 90cm Size** – practical for everyday use ✔ **Virtually Indestructible Construction** ✔ **Quality British Made 🇬🇧** --- ### 🚜 **Perfect For** - Trucks / HGVs - 4×4 & Off-Road Vehicles - Agricultural Machinery - Pickup Trucks - Daily CB Use --- ### 📡 **Reliable Performance** - Covers full **27–28 MHz CB band (80 channels)** - **Low VSWR (1.5:1 or better)** for efficient transmission - Designed for **stable communication in harsh conditions** --- ### ⚙️ **Specifications** - Model: **Mini Springer / Stinger Aerial** - Frequency: **27–28 MHz** - Length: **89cm (approx. 90cm)** - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8” Male Thread** - Design: **Open Coil Springer** - Whip Material: **Stainless Steel** - Pre-Tuned: **Yes** --- ### ⚠️ **Don’t Buy Cheap Copies** Lower quality antennas: - Snap or bend easily - Perform poorly - Don’t last 👉 This is a **proven heavy-duty aerial trusted by working drivers**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Colours Available** 👉 Check our shop for: - Black - Red Tornado - Blue - Yellow - Stainless Steel --- ### 🔥 **Order Today** **Compact. Tough. Built for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-white-4x4-cb-aerial-trucker-80-stinger-small-orbitor-90cm-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-white-4x4-cb-aerial-trucker-80-stinger-small-orbitor-90cm-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-white-4x4-cb-aerial-trucker-80-stinger-small-orbitor-90cm-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-white-4x4-cb-aerial-trucker-80-stinger-small-orbitor-90cm-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20White%20mini%20Springer%204x4%20CB%20aerial%20trucker%2080%20stinger%20small%20Orbitor%2090cm%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-white-4x4-cb-aerial-trucker-80-stinger-small-orbitor-90cm-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-white-4x4-cb-aerial-trucker-80-stinger-small-orbitor-90cm-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-white-4x4-cb-aerial-trucker-80-stinger-small-orbitor-90cm-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-white-4x4-cb-aerial-trucker-80-stinger-small-orbitor-90cm-antenna/?share=telegram) - **Product categories:** Mini Stinger --- ### [Mini Tornado Stinger CB aerial small Antenna Tractor 4x4 Lorry HGV Any Colour](https://cbradio.co.uk/product/mini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour/) **Published:** February 13, 2020 **Author:** Jan **Content:** - ## 🌪🚛 **Mini Tornado Stinger CB Aerial – Compact Springer Antenna – 4×4 Tractor HGV – Any Colour** **Small Size – Heavy Duty Performance** The **Mini Tornado Stinger CB Aerial** is a **compact version of the classic springer antenna**, offering the same **rugged durability and flexibility** in a shorter, more practical size. 👉 Perfect for vehicles where height is restricted but performance still matters. --- ### 🎨 **Available in Any Colour** 👉 Leave your **colour choice at checkout** (Black supplied as standard if no preference is given) --- ### ✅ **Why This Antenna is So Popular** ✔ **Pre-Tuned CB Antenna (27–28 MHz)** ✔ **Heavy Duty Open Coil Design** – absorbs knocks & vibration ✔ **Flexible Stainless Steel Whip** – ideal for tough environments ✔ **Compact Size – Easier for Daily Use** ✔ **Virtually Indestructible Build** ✔ **Quality British Made 🇬🇧** --- ### 🚜 **Perfect For** - 4×4 & Off-Road Vehicles - Tractors & Agricultural Use - Trucks / HGVs - Pickup Trucks - Everyday CB Users --- ### 📡 **Performance You Can Rely On** - Covers full **27–28 MHz CB band** - **Low VSWR (1.5:1 or better)** for efficient transmission - Designed for **stable performance in harsh conditions** --- ### ⚙️ **Specifications** - Model: **Mini Tornado Stinger Aerial** - Frequency: **27–28 MHz** - Length: **Approx. 90cm (0.9m)** *(corrected from 0.90cm)* - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8” Male Thread** - Design: **Open Coil Springer** - Whip Material: **Stainless Steel** - Pre-Tuned: **Yes (Ready to Fit)** --- ### ⚠️ **Don’t Buy Cheap Copies** Lower quality antennas: - Snap or bend easily - Perform poorly - Don’t last 👉 This is a **proven heavy-duty aerial trusted by working drivers**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mounts (mag, mirror, boot mounts) - Coax cable & connectors - SWR meters & tuning tools - CB radios & accessories --- ### 🔥 **Order Today** **Compact. Tough. Built for real use.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20Tornado%20Stinger%20CB%20aerial%20small%20Antenna%20Tractor%204x4%20Lorry%20HGV%20Any%20Colour&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-tornado-stinger-cb-aerial-small-antenna-tractor-4x4-lorry-hgv-any-colour/?share=telegram) - **Product categories:** Mini Stinger --- ### [Blue Tornado stinger Springer 4x4 CB aerial mini small Orbitor antenna](https://cbradio.co.uk/product/blue-tornado-stinger-springer-4x4-cb-aerial-mini-small-orbitor-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔵📡 **Blue Mini Springer CB Antenna – 4×4 Stinger Aerial – 3/8 Heavy Duty 27MHz** **Compact • Tough • Built for Off-Road** The **Blue Mini Springer (Stinger/Orbitor style)** is a **compact, heavy-duty CB antenna** designed for **4×4, trucks, and tough environments**. 👉 A smaller version of the classic springer with **serious durability and performance**. --- ### 🔥 **Why Choose the Blue Mini Springer** ✔ **Virtually Indestructible Design** ✔ **Flexible Stainless Steel Whip** ✔ **Compact Size for Low Clearance** ✔ **Pre-Tuned – Ready to Use** ✔ **Quality British Made** --- ### 📡 **Performance Highlights** - Frequency: **27–28 MHz (CB Band)** - **Low VSWR ≤ 1.5:1** - **High power handling up to 1000W** 👉 Strong, reliable signal for everyday use. --- ### 🚙 **Perfect For** - 4×4 & off-road vehicles - Trucks & vans - Agricultural machinery - Tight height restrictions - Rugged environments --- ### ⚙️ **Specifications** - Type: **Base Loaded Springer Antenna** - Frequency: **27–28 MHz** - Length: **89 cm** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8 Male Thread** - Whip: **Stainless Steel** - Colour: **Blue** --- ### 💡 **Why Mini Springers Are So Popular** ✔ Flexible design absorbs impacts ✔ Ideal for low branches & obstacles ✔ Compact but effective ✔ Proven performance since the 90s 👉 A **true workhorse antenna**. --- ### 🔧 **Installation Tips** ✔ Requires **3/8 mount** ✔ Ensure good grounding ✔ Mount as high as possible --- ### ⚠️ **Important Notes** ❗ Requires mount & coax cable (not included) ❗ Performance depends on installation --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Colours Available** 👉 Check our shop for: - Black / Chrome / Red / Green / orange / yellow / white etc - Mounts & brackets - Coax cable & connectors - SWR meters --- ### 🔥 **Order Today** **Small size. Big strength. Built to last.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/blue-tornado-stinger-springer-4x4-cb-aerial-mini-small-orbitor-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/blue-tornado-stinger-springer-4x4-cb-aerial-mini-small-orbitor-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/blue-tornado-stinger-springer-4x4-cb-aerial-mini-small-orbitor-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/blue-tornado-stinger-springer-4x4-cb-aerial-mini-small-orbitor-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Blue%20Tornado%20stinger%20Springer%204x4%20CB%20aerial%20%20mini%20small%20Orbitor%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fblue-tornado-stinger-springer-4x4-cb-aerial-mini-small-orbitor-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/blue-tornado-stinger-springer-4x4-cb-aerial-mini-small-orbitor-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/blue-tornado-stinger-springer-4x4-cb-aerial-mini-small-orbitor-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/blue-tornado-stinger-springer-4x4-cb-aerial-mini-small-orbitor-antenna/?share=telegram) - **Product categories:** Mini Stinger --- ### [RED Mini Springer 4x4 CB aerial tornado stinger small Orbitor antenna](https://cbradio.co.uk/product/mini-springer-red-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚗📡 Red Mini Springer CB Aerial – 3/8 Fit – Pre-Tuned Stinger Antenna **Heavy Duty • Pre-Tuned • Built to Last** The **Red Mini Springer** is one of the **most popular CB trucking antennas**, known for its **tough build and reliable performance**. 👉 Virtually indestructible --- 🔥 **Why Choose This Aerial** ✔ Pre-Tuned – Ready to Use ✔ Heavy Duty Open Coil Design ✔ Flexible Stainless Steel Whip ✔ 3/8 Standard Mount Fit ✔ British Made Quality 👉 Built for real-world use --- 📦 **What’s Included** ✔ Red Mini Springer CB Aerial 👉 Ready to mount --- 📡 **Performance Highlights** Frequency Range: 27–28 MHz VSWR: 1.5:1 or better Power Handling: Up to 1000W 👉 Strong, reliable performance --- ⚙️ **Specifications** Type: Mini Springer / Stinger Aerial Length: 89cm Fitting: 3/8 Male Whip: Stainless Steel Design: Open Coil Spring Base --- 💡 **Why This Aerial Stands Out** ✔ Flexible – won’t snap under pressure ✔ Heavy duty coil for durability ✔ Proven design used by truckers & off-roaders ✔ Consistent supply – UK made 👉 A trusted favourite --- 🚙 **Perfect For** Trucks 4×4 & Off-Road Vehicles Vans Farm Vehicles 👉 Ideal for tough environments --- 🔧 **Installation** ✔ Screw onto 3/8 mount ✔ Check SWR if required ✔ Ready to go 👉 Quick and simple setup --- ⚠️ **Important Notes** ❗ Requires 3/8 mount (sold separately) ❗ Pre-tuned but fine tuning may improve performance ❗ Suitable for mobile use --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: Mounts Coax cables SWR meters CB radios --- 🔥 **Order Today** **Tough build. Proven design. Built to last.** 🚗📡 ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-red-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-red-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-red-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-red-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RED%20Mini%20Springer%204x4%20CB%20aerial%20tornado%20stinger%20small%20Orbitor%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-red-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-red-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-red-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-red-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=telegram) - **Product categories:** Mini Stinger --- ### [orange mini stinger antenna small springer](https://cbradio.co.uk/product/orange-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini Orange Stinger CB Antenna** is a **compact, heavy-duty springer aerial**, built for **reliable performance and durability in tough environments**. With its **bright orange finish and rugged open coil design**, it’s a favourite for **off-roaders, farmers and truck users**. --- ## 📡 Compact & Practical ✔ Length: **89 cm** ✔ Ideal where height is limited ✔ Great balance of size and performance --- ## 💪 Heavy Duty Springer Design - Open coil spring base - Flexible under impact - Absorbs knocks and vibration ✔ Built for real-world use --- ## 🚜 Made for Tough Environments Perfect for: - 4×4 and off-road vehicles - Tractors and agricultural machinery - Vans and trucks ✔ Handles branches, bumps and daily abuse --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Suitable for all CB radio setups --- ## 🎯 Pre-Tuned for Convenience ✔ Pre-set for **27–28 MHz CB band** ✔ Quick installation ✔ Minimal tuning required --- ## 🔩 Standard 3/8″ Fitting - Fits most CB mounts - Compatible with mirror, gutter and body mounts ✔ Universal compatibility --- ## High Visibility Orange Finish ✔ Easy to spot ✔ Adds a distinctive look ✔ Popular for off-road builds --- ## 🇬🇧 Quality British Made ✔ Reliable construction ✔ Consistent quality ✔ Trusted design --- ## Key Features - Mini springer CB antenna - 89cm length - Heavy duty open coil - 1000W power handling - 3/8″ thread fitting --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 89 cm - **VSWR:** ≤ 1.5:1 - **Power:** 1000W - **Fitting:** 3/8″ male --- ## Why Choose This Antenna? ✔ Compact and durable ✔ Flexible and impact resistant ✔ High visibility finish ✔ Proven performance --- ## Ideal For - Off-road vehicles - Work trucks and vans - Farmers and 4×4 users - Compact CB setups --- ## Straight Talking If you want a **tough, compact aerial that stands out and performs**, this is a solid choice. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/orange-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/orange-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/orange-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/orange-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20orange%20mini%20stinger%20antenna%20small%20springer&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Forange-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/orange-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/orange-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/orange-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=telegram) - **Product categories:** Mini Stinger --- ### [green mini stinger antenna small springer ariel rugged 4x4 cb radio aerial](https://cbradio.co.uk/product/green-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini Green Stinger CB Antenna** is a **compact, heavy-duty springer aerial**, designed for **reliable CB performance in tough environments**. With its **rugged open coil design and bright green finish**, it’s ideal for **off-roaders, farmers and truck users** who need a **durable, flexible antenna**. --- ## 📡 Compact Performance ✔ Length: **99 cm** ✔ Great balance of size and performance ✔ Ideal where height is limited --- ## 💪 Heavy Duty Springer Design - Open coil spring base - Flexible under impact - Absorbs knocks and vibration ✔ Built for real-world use --- ## 🚜 Perfect for Tough Environments Ideal for: - 4×4 and off-road vehicles - Tractors and agricultural machinery - Vans and work trucks ✔ Handles rough conditions --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Suitable for all CB setups --- ## 🎯 Pre-Tuned Convenience ✔ Pre-set for **27–28 MHz CB band** ✔ Quick installation ✔ Minimal tuning required --- ## 🔩 Standard 3/8″ Fitting - Fits most CB mounts - Compatible with mirror, gutter and body mounts ✔ Universal fit --- ## Distinctive Green Finish ✔ Stands out from standard black antennas ✔ Ideal for custom setups --- ## 🇬🇧 Quality British Made ✔ Reliable construction ✔ Consistent quality ✔ Trusted design --- ## Key Features - Mini springer CB antenna - 99cm length - Heavy duty open coil - 1000W power handling - 3/8″ thread fitting --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 99 cm - **VSWR:** ≤ 1.5:1 - **Power:** 1000W - **Fitting:** 3/8″ male --- ## Why Choose This Antenna? ✔ Compact and practical ✔ Tough and flexible ✔ Unique colour option ✔ Proven performance --- ## Ideal For - Off-road vehicles - Work trucks and vans - Farmers and 4×4 users - Compact CB setups --- ## Straight Talking If you want a **tough aerial that doesn’t blend in with the rest**, this is a solid choice. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/green-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/green-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/green-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/green-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20green%20mini%20stinger%20antenna%20small%20springer%20ariel%20rugged%204x4%20cb%20radio%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fgreen-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/green-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/green-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/green-mini-stinger-antenna-small-springer-ariel-rugged-4x4-cb-radio-aerial/?share=telegram) - **Product categories:** Mini Stinger --- ### [Yellow Mini Springer 4x4 CB aerial tornado](https://cbradio.co.uk/product/mini-springer-yellow-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini Yellow Stinger CB Antenna** is a **compact, heavy-duty springer aerial** designed for **reliable CB performance in tough environments**. With its **bright yellow finish and rugged open coil design**, it’s perfect for **off-roaders, farmers and truck users** who need something that **won’t let them down**. --- ## 📡 Compact but Capable ✔ Length: **89 cm** ✔ Good balance of performance and practicality ✔ Ideal where height is limited --- ## 💪 Heavy Duty Springer Design - Open coil spring base - Flexible and impact resistant - Absorbs knocks and vibration ✔ Built for rough use --- ## 🚜 Perfect for Off-Road & Work Vehicles Ideal for: - 4x4s and off-road builds - Tractors and agricultural machinery - Vans and trucks ✔ Handles branches, bumps and daily abuse --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Suitable for all CB setups --- ## 🎯 Pre-Tuned Convenience ✔ Pre-tuned for CB band ✔ Quick installation ✔ Minimal setup required --- ## 🔧 Standard 3/8″ Fitting - Fits most CB mounts - Compatible with mirror, gutter and body mounts ✔ Easy to install --- ## High Visibility Yellow Finish ✔ Easy to spot ✔ Adds a distinctive look ✔ Popular for off-road setups --- ## 🇬🇧 Quality British Made ✔ Reliable construction ✔ Consistent quality ✔ Trusted design --- ## Key Features - Mini springer CB antenna - 89cm length - Heavy duty open coil - 1000W power handling - 3/8″ thread fitting --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 89 cm - **VSWR:** ≤ 1.5:1 - **Power:** 1000W - **Fitting:** 3/8″ male --- ## Why Choose This Antenna? ✔ Compact and practical size ✔ Strong and flexible ✔ Bright, high-visibility finish ✔ Proven performance --- ## Ideal For - Off-road vehicles - Work trucks and vans - Farmers and 4×4 users - Compact CB setups --- ## Straight Talking If you want a **tough, compact aerial that still performs**, this is a solid choice. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-yellow-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-yellow-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-yellow-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-yellow-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Yellow%20Mini%20Springer%204x4%20CB%20aerial%20tornado&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-yellow-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-yellow-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-yellow-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-yellow-4x4-cb-aerial-tornado-stinger-small-orbitor-antenna/?share=telegram) - **Product categories:** Mini Stinger --- ### [Chrome mini Springer 4x4 CB aerial stinger small Orbitor antenna](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/) **Published:** July 23, 2026 **Author:** Jan **Content:** - The **Mini Chrome Stinger CB Antenna** is a **compact, heavy-duty springer aerial**, built for **reliable performance and durability in tough environments**. With its **bright orange finish and rugged open coil design**, it’s a favourite for **off-roaders, farmers and truck users**. --- ✔ Length: **89 cm** ✔ Ideal where height is limited ✔ Great balance of size and performance --- - Open coil spring base - Flexible under impact - Absorbs knocks and vibration ✔ Built for real-world use --- Perfect for: - 4×4 and off-road vehicles - Tractors and agricultural machinery - Vans and trucks ✔ Handles branches, bumps and daily abuse --- ✔ Rated up to **1000 Watts** ✔ Suitable for all CB radio setups --- ✔ Pre-set for **27–28 MHz CB band** ✔ Quick installation ✔ Minimal tuning required --- - Fits most CB mounts - Compatible with mirror, gutter and body mounts ✔ Universal compatibility --- ✔ Easy to spot ✔ Adds a distinctive look ✔ Popular for off-road builds --- ✔ Reliable construction ✔ Consistent quality ✔ Trusted design --- - Mini springer CB antenna - 89cm length - Heavy duty open coil - 1000W power handling - 3/8″ thread fitting --- - **Frequency:** 27–28 MHz - **Length:** 89 cm - **VSWR:** ≤ 1.5:1 - **Power:** 1000W - **Fitting:** 3/8″ male --- ✔ Compact and durable ✔ Flexible and impact resistant ✔ High visibility finish ✔ Proven performance --- - Off-road vehicles - Work trucks and vans - Farmers and 4×4 users - Compact CB setups --- If you want a **tough, compact aerial that stands out and performs**, this is a solid choice. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Chrome%20mini%20Springer%204x4%20CB%20aerial%20stinger%20small%20Orbitor%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-chrome-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=telegram) - **Product categories:** Mini Stinger --- ### [Stainless steel mini Springer 4x4 CB aerial stinger small Orbitor antenna](https://cbradio.co.uk/product/mini-springer-stainless-steel-4x4-cb-aerial-stinger-small-orbitor-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Full Stainless Steel Mini Springer CB Antenna** is a **compact, heavy-duty aerial**, built **entirely from stainless steel** to eliminate the common problem of **rusting chrome antennas**. Designed for **tough environments**, this is a **fit-and-forget upgrade**. --- ## 🛡 100% Stainless Steel Construction ✔ No chrome plating to peel or rust ✔ Corrosion resistant in all weather ✔ Built for long-term use ✔ Ideal for year-round outdoor use --- ## 📏 Compact 89cm Design ✔ Height-friendly for everyday driving ✔ Reduced risk of hitting obstacles ✔ Perfect for 4x4s, vans and tractors --- ## 💪 Heavy Duty Springer Coil ✔ Open coil spring base ✔ Absorbs knocks and vibration ✔ Flexible under impact ✔ Built for off-road and work use --- ## 📡 Proven CB Performance ✔ Pre-tuned for **27–28 MHz** ✔ Full 80 channel coverage ✔ Stable transmit and receive --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Suitable for standard and high-power setups --- ## 🔩 Standard 3/8″ Fitment ✔ Fits most CB antenna mounts ✔ Compatible with mirror, gutter and body mounts --- ## 🎯 Pre-Tuned Convenience ✔ Ready to install ✔ Minimal adjustment required ✔ Quick setup --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 89cm - **VSWR:** ≤ 1.5:1 - **Power:** 1000W - **Fitting:** 3/8″ male - **Material:** Full stainless steel --- ## Key Features - Mini springer CB antenna - 100% stainless steel build - Rust resistant design - Compact 89cm length - Heavy duty open coil --- ## Why Choose This Antenna? ✔ No rust issues like chrome versions ✔ Strong, flexible and durable ✔ Reliable everyday performance ✔ Built for harsh environments --- ## Ideal For - 4×4 owners - Farmers and contractors - Truck and van drivers - Everyday CB users --- ## Straight Talking Stop replacing rusty aerials — fit this once and forget about it. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-stainless-steel-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-stainless-steel-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-stainless-steel-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-stainless-steel-4x4-cb-aerial-stinger-small-orbitor-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Stainless%20steel%20mini%20Springer%204x4%20CB%20aerial%20stinger%20small%20Orbitor%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-stainless-steel-4x4-cb-aerial-stinger-small-orbitor-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-stainless-steel-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-stainless-steel-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-stainless-steel-4x4-cb-aerial-stinger-small-orbitor-antenna/?share=telegram) - **Product categories:** Mini Stinger --- ### [3/8 Stud Mount Heavy Duty for HF Antenna or CB Radio Aerial whip](https://cbradio.co.uk/product/3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔧 **3/8 Stud Mount Heavy Duty – SO239 to 3/8 Adapter – CB / HF Antenna Mount** **Strong • Reliable • Universal Fit** This **heavy duty 3/8 stud mount** is designed to **convert an SO239 connection into a standard 3/8 aerial fitting**, allowing you to mount **CB or HF antennas securely**. 👉 The same trusted mount used on **mirror and roof rack installations**. --- ### 🔥 **Why Choose This Stud Mount** ✔ **Converts SO239 to 3/8 Thread** ✔ **Heavy Duty Construction** ✔ **Reliable Electrical Connection** ✔ **Proven in Real Installations** --- ### ✅ **Key Features** ✔ **3/8 Thread for CB & HF Aerials** ✔ **SO239 Socket (UHF Female)** ✔ **Compatible with PL259 Coax Plugs** ✔ **Durable & Long-Lasting Build** ✔ **Ideal for Custom Mounting Setups** --- ### 📡 **Perfect For** - CB radio antenna installs - HF antenna setups - Mirror mounts & roof racks - Custom bracket installations - Vehicle or base station builds --- ### ⚙️ **Specifications** - Type: **3/8 Stud Mount Adapter** - Input: **SO239 (UHF Female)** - Output: **3/8 Thread (Aerial Side)** - Compatibility: **PL259 Coax Connector** --- ### 💡 **Why This Mount Is Essential** ✔ Allows use of **standard 3/8 antennas** ✔ Provides **secure and stable connection** ✔ Widely used across **CB and HF setups** 👉 A key component for **proper antenna installation**. --- ### 🔧 **Common Use** ✔ Converts coax connection to aerial thread ✔ Used in mirror mounts, roof racks & custom brackets ✔ Suitable for both mobile and base installations --- ### ⚠️ **Important Notes** ❗ Requires **PL259 coax cable** ❗ Designed for **3/8 threaded aerials only** ❗ Ensure good grounding for best performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - 3/8 antennas & whips - Coax cable & connectors - Mounts & brackets - SWR meters & tuning tools --- ### 🔥 **Order Today** **Connect it right. Mount it properly. Perform better.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%2F8%20Stud%20Mount%20Heavy%20Duty%20for%20HF%20Antenna%20or%20CB%20Radio%20Aerial%20whip&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-8-stud-mount-heavy-duty-for-hf-antenna-or-cb-radio-aerial-whip/?share=telegram) - **Product categories:** Stud Mounts --- ### [Ground-plane mirror cb aerial mount Kit for Fibreglass Cabs counterpoise](https://cbradio.co.uk/product/ground-plane-mirror-cb-aerial-mount-kit-for-fibreglass-cabs-counterpoise/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚛 **Ground Plane Mirror Mount CB Antenna Kit – Fibreglass Cab Counterpoise – 3/8 + 4m Cable** **No Ground? No Problem • Complete Kit • Proven Solution** This **ground plane mirror mount kit** is specially designed for **fibreglass cabs and non-metal surfaces**, where a normal antenna would struggle due to poor grounding. 👉 A **smart solution** for trucks, vans, and specialist vehicles. --- ### 🔥 **Why Choose This Kit** ✔ **Built-In Ground Plane (Counterpoise)** ✔ **Perfect for Fibreglass Cabs** ✔ **Complete Ready-to-Install Kit** ✔ **Improves Signal Performance** --- ### 📦 **What’s Included** ✔ **Flat Bar Mirror Mount Bracket** ✔ **Integrated Ground Plane Element** ✔ **3/8 Stud Mount (for Aerials)** ✔ **4 Metres RG58 Coax Cable** ✔ **PL259 Connector (Fitted)** 👉 Everything needed for a **proper installation**. --- ### 📡 **What Makes This Different** Standard mounts: - Require metal body for grounding - Perform poorly on fibreglass 👉 This kit: ✔ Provides its **own ground plane** ✔ Ensures **proper antenna performance** ✔ Works where others fail --- ### 🚛 **Perfect For** - Fibreglass cab trucks - Vans & commercial vehicles - Motorhomes - Agricultural machinery - Specialist vehicles with poor grounding --- ### ⚙️ **Specifications** - Mount Type: **Flat Bar Mirror Mount** - Thread: **3/8 Stud** - Cable: **4m RG58 Coax** - Connector: **PL259 (Fitted)** - Feature: **Integrated Ground Plane / Counterpoise** --- ### 💡 **Why Ground Plane Matters** Without proper grounding: - Weak signal - High SWR - Poor transmit/receive 👉 This system: ✔ Creates a **proper RF ground** ✔ Improves performance dramatically --- ### 🔧 **Installation** ✔ Mount to mirror arm or bracket ✔ Connect coax to radio ✔ Fit 3/8 antenna 👉 Simple and effective setup. --- ### ⚠️ **Important Notes** ❗ Designed for **3/8 threaded aerials** ❗ Ideal for non-metal mounting locations --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB antennas (3/8 fitting) - SWR meters & tuning tools - Power leads & accessories - Mounting brackets --- ### 🔥 **Order Today** **No metal? No problem. Get the performance you need.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ground-plane-mirror-cb-aerial-mount-kit-for-fibreglass-cabs-counterpoise/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ground-plane-mirror-cb-aerial-mount-kit-for-fibreglass-cabs-counterpoise/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ground-plane-mirror-cb-aerial-mount-kit-for-fibreglass-cabs-counterpoise/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ground-plane-mirror-cb-aerial-mount-kit-for-fibreglass-cabs-counterpoise/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Ground-plane%20mirror%20cb%20aerial%20mount%20Kit%20for%20Fibreglass%20Cabs%20counterpoise&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fground-plane-mirror-cb-aerial-mount-kit-for-fibreglass-cabs-counterpoise%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ground-plane-mirror-cb-aerial-mount-kit-for-fibreglass-cabs-counterpoise/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ground-plane-mirror-cb-aerial-mount-kit-for-fibreglass-cabs-counterpoise/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ground-plane-mirror-cb-aerial-mount-kit-for-fibreglass-cabs-counterpoise/?share=telegram) - **Product categories:** Mirror Mounts --- ### [right angle mirror / rail mount with so239 fitting cb / ham radio aerial bracket](https://cbradio.co.uk/product/right-angle-mirror-rail-mount-with-so239-fitting-cb-ham-radio-aerial-bracket/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚛📡 **Right Angle Mirror Mount SO239 – CB / Ham Antenna Rail Mount – 4m RG58 Cable** **Strong Mount • Clean Install • Built for Sirio Antennas** This **right angle mirror / rail mount** is designed for **secure antenna installation on mirror arms, roof racks, or bars**, making it ideal for **trucks, vans, and 4×4 setups**. 👉 Perfect for antennas using an **SO239 (UHF) connection**. --- ### 💪 **Heavy Duty Aluminium Design** ✔ **Strong Aluminium Construction** ✔ **Right Angle Bracket for Easy Fitment** ✔ **Stable Mounting on Bars & Rails** 👉 Built for **real-world use on working vehicles**. --- ### ✅ **Key Features** ✔ **SO239 Socket (UHF Female)** ✔ **Approx. 4 Metres RG58 Coax Cable** ✔ **PL259 Connector Fitted (Radio End)** ✔ **Easy Installation on Mirror Arms / Rails** ✔ **Suitable for Bars up to 25mm Diameter** --- ### 📡 **Perfect For** - Trucks / HGVs - Vans & commercial vehicles - 4×4 & off-road builds - Roof racks & light bars - Mirror arm installations --- ### 🔧 **Compatibility** ✔ Ideal for **Sirio antennas and similar SO239-based aerials** ❗ **Not compatible with 3/8 thread aerials** 👉 (Springer / Stinger types require 3/8 mount – see our shop) --- ### ⚙️ **Specifications** - Mount Type: **Right Angle Mirror / Rail Mount** - Connection: **SO239 (UHF Female)** - Cable: **Approx. 4m RG58** - Connector: **PL259 (Radio End)** - Fitment: **Up to 25mm bar (extendable with longer bolts)** --- ### 💡 **Why Choose This Mount** ✔ No drilling required ✔ Strong and secure positioning ✔ Ideal for removable installations ✔ Clean, professional finish --- ### ⚠️ **Important Notes** ❗ Designed for **SO239 type antennas only** ❗ Check bar diameter before fitting ❗ For 3/8 aerials, see our other listings --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Sirio antennas - 3/8 mounts (Springer / Stinger) - Coax cable & connectors - SWR meters & tuning tools --- ### 🔥 **Order Today** **Strong mount. Easy fit. Built for the road.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/right-angle-mirror-rail-mount-with-so239-fitting-cb-ham-radio-aerial-bracket/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/right-angle-mirror-rail-mount-with-so239-fitting-cb-ham-radio-aerial-bracket/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/right-angle-mirror-rail-mount-with-so239-fitting-cb-ham-radio-aerial-bracket/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/right-angle-mirror-rail-mount-with-so239-fitting-cb-ham-radio-aerial-bracket/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20right%20angle%20mirror%20%2F%20rail%20mount%20with%20so239%20fitting%20cb%20%2F%20ham%20radio%20aerial%20bracket&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fright-angle-mirror-rail-mount-with-so239-fitting-cb-ham-radio-aerial-bracket%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/right-angle-mirror-rail-mount-with-so239-fitting-cb-ham-radio-aerial-bracket/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/right-angle-mirror-rail-mount-with-so239-fitting-cb-ham-radio-aerial-bracket/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/right-angle-mirror-rail-mount-with-so239-fitting-cb-ham-radio-aerial-bracket/?share=telegram) - **Product categories:** Mirror Mounts --- ### [Mirror rail Mount Kit flat bar with 4m cable so239 fitting for sirio](https://cbradio.co.uk/product/mirror-rail-mount-kit-flat-bar-with-4m-cable-so239-fitting-for-sirio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Heavy Duty Mirror Mount Kit SO239** is a **rugged flat bar mount system**, designed for **mirror arms, roof racks, and bars** on trucks, 4x4s and vans. Supplied with **4m RG58 coax and PL259 plug**, this is a **complete mounting solution ready to install**. --- ## 💪 Extra Heavy Duty Design ✔ Strong flat bar construction ✔ **Double groove 2-bolt clamp** for secure fit ✔ Built to handle vibration and rough use ✔ Won’t shift under load --- ## 🚛 Flexible Mounting Options Ideal for: - Mirror arms (trucks & vans) - Roof racks - Roll bars - Ladder racks ✔ Versatile installation --- ## 🔌 SO239 Antenna Fitting - Standard **SO239 socket** - Compatible with PL259 antenna connections - Suitable for CB and ham antennas ✔ Universal compatibility --- ## 📡 Complete Cable Included ✔ **4 metre RG58 coax cable** ✔ **PL259 plug fitted** ✔ Ready to connect to your radio --- ## 🔧 Easy Installation - Clamp onto bar or rail - Tighten bolts securely - Fit antenna and connect cable ✔ No drilling required --- ## 🌧 Built for Outdoor Use ✔ Weather-resistant ✔ Strong and reliable in all conditions ✔ Ideal for daily and off-road use --- ## Key Features - Heavy duty mirror / rail mount - SO239 antenna socket - 4m RG58 coax cable - PL259 connector fitted - Double groove clamp design --- ## Why Choose This Mount? ✔ Stronger than basic mounts ✔ Complete ready-to-use kit ✔ Flexible mounting options ✔ Reliable signal setup --- ## Ideal For - Truck drivers - 4×4 and off-road vehicles - Vans and commercial vehicles - CB and amateur radio users --- ## Straight Talking If you want a mount that **stays tight and works properly**, this is it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mirror-rail-mount-kit-flat-bar-with-4m-cable-so239-fitting-for-sirio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mirror-rail-mount-kit-flat-bar-with-4m-cable-so239-fitting-for-sirio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mirror-rail-mount-kit-flat-bar-with-4m-cable-so239-fitting-for-sirio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mirror-rail-mount-kit-flat-bar-with-4m-cable-so239-fitting-for-sirio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mirror%20rail%20Mount%20Kit%20flat%20bar%20with%204m%20cable%20so239%20fitting%20for%20sirio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmirror-rail-mount-kit-flat-bar-with-4m-cable-so239-fitting-for-sirio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mirror-rail-mount-kit-flat-bar-with-4m-cable-so239-fitting-for-sirio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mirror-rail-mount-kit-flat-bar-with-4m-cable-so239-fitting-for-sirio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mirror-rail-mount-kit-flat-bar-with-4m-cable-so239-fitting-for-sirio/?share=telegram) - **Product categories:** Mirror Mounts --- ### [7m rg58 Replacement cable for Land Rover Defender 110 PSM1 rear body mount](https://cbradio.co.uk/product/7m-rg58-replacement-cable-for-land-rover-defender-110-psm1-rear-body-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **7m RG58 Cable for PSM-1 Mount** is a **purpose-made cable designed specifically for Land Rover Defender 110 setups** using a rear-mounted antenna. This is the **correct length to run cleanly from the rear mount to the dashboard**, without stretching, joining, or compromising performance. --- ## 🚙 Designed for Defender 110 ✔ Perfect length for **rear mount → front dash routing** ✔ Ideal for installs into **Raptor dash or similar setups** ✔ No excess cable, no short runs ✔ Fits the vehicle properly --- ## 📏 7 Metres – The Right Length - Designed for Defender 110 - Clean cable routing from back to front - Avoids signal loss from joins or extensions --- ## 🔌 Ready to Connect - High-quality **RG58 coax cable** - **PL259 connector fitted** - Compatible with most CB and antenna setups ✔ Plug straight into your radio --- ## 💪 Built for Real-World Use - Made using **quality materials we trust ourselves** - Durable and reliable - Designed with off-road use in mind ✔ Built by people who actually use it --- ## 🔧 Cable Only Option - Ideal if you already have the mount - Replace or upgrade existing cable - No need to buy full kit again --- ## 🔁 Other Options Available - Full mount + cable kits available - Defender 110 (7m) - Defender 90 (5m) --- ## Key Features - 7 metre coax cable - RG58 high quality cable - PL259 connector fitted - Designed for Defender 110 - Rear mount compatible --- ## Why Choose This Cable? ✔ Correct length for Defender installs ✔ No cheap generic cable ✔ Reliable signal performance ✔ Built for off-road conditions --- ## Ideal For - Land Rover Defender 110 owners - Rear antenna mount setups - Replacement or upgrade cable - Clean professional installs --- ## Straight Talking This is the **right cable for the job** — not something you have to make fit. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/7m-rg58-replacement-cable-for-land-rover-defender-110-psm1-rear-body-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/7m-rg58-replacement-cable-for-land-rover-defender-110-psm1-rear-body-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/7m-rg58-replacement-cable-for-land-rover-defender-110-psm1-rear-body-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/7m-rg58-replacement-cable-for-land-rover-defender-110-psm1-rear-body-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%207m%20rg58%20Replacement%20cable%20for%20Land%20Rover%20Defender%20110%20PSM1%20rear%20body%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F7m-rg58-replacement-cable-for-land-rover-defender-110-psm1-rear-body-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/7m-rg58-replacement-cable-for-land-rover-defender-110-psm1-rear-body-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/7m-rg58-replacement-cable-for-land-rover-defender-110-psm1-rear-body-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/7m-rg58-replacement-cable-for-land-rover-defender-110-psm1-rear-body-mount/?share=telegram) - **Product categories:** Patch Leads, Side Mounts --- ### [5m rg58 replacement cable for psm1 body mount](https://cbradio.co.uk/product/5m-rg58-replacement-cable-for-psm1-land-rover-defender-90-rear-body-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **5m RG58 Cable for PSM-1 Mount** is a **purpose-built replacement cable** designed specifically for **Land Rover Defender 90 rear-mounted antenna setups**. This is the **correct length for a clean install from the rear mount to the dashboard**, avoiding excess cable or awkward routing. --- ## 🚙 Designed for Defender 90 ✔ Perfect for **rear mount → front dash routing** ✔ Ideal for installs into **Raptor dash or similar setups** ✔ No excess cable to hide ✔ Fits the vehicle properly --- ## 📏 5 Metres – Correct Fit - Designed specifically for Defender 90 - Clean, tidy cable run - No stretching or unnecessary slack --- ## 🔌 Ready to Connect - **High-quality RG58 coax cable** - **PL259 connector fitted** - Compatible with CB and antenna systems ✔ Plug straight into your radio --- ## 💪 Built for Real Use - Made using **quality materials we trust ourselves** - Designed for off-road conditions - Durable and reliable ✔ Built by people who use it --- ## 🔧 Cable Only Option - Ideal replacement or upgrade - Use with existing PSM-1 mount - No need to buy full kit again --- ## 🔁 Other Options Available - Defender 110 version (7m cable) - Full mount + cable kits also available --- ## Key Features - 5 metre coax cable - RG58 high quality cable - PL259 connector fitted - Designed for Defender 90 - Rear mount compatible --- ## Why Choose This Cable? ✔ Correct length for Defender 90 installs ✔ No cheap generic cable ✔ Reliable signal performance ✔ Clean professional installation --- ## Ideal For - Land Rover Defender 90 owners - Rear antenna mount setups - Replacement or upgrade cable - Clean installs --- ## Straight Talking This is the **right cable for a Defender 90** — no guessing, no bodging. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/5m-rg58-replacement-cable-for-psm1-land-rover-defender-90-rear-body-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/5m-rg58-replacement-cable-for-psm1-land-rover-defender-90-rear-body-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/5m-rg58-replacement-cable-for-psm1-land-rover-defender-90-rear-body-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/5m-rg58-replacement-cable-for-psm1-land-rover-defender-90-rear-body-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%205m%20rg58%20replacement%20cable%20for%20psm1%20body%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F5m-rg58-replacement-cable-for-psm1-land-rover-defender-90-rear-body-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/5m-rg58-replacement-cable-for-psm1-land-rover-defender-90-rear-body-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/5m-rg58-replacement-cable-for-psm1-land-rover-defender-90-rear-body-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/5m-rg58-replacement-cable-for-psm1-land-rover-defender-90-rear-body-mount/?share=telegram) - **Product categories:** Patch Leads, Side Mounts --- ### [FIRE-STICK 3/8 'N' DV Base Mount and cable Kit for CB aerial or Ham Antenna](https://cbradio.co.uk/product/fire-stick-3-8-n-dv-base-mount-and-cable-kit-for-cb-aerial-or-ham-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚙 **3/8 DV Mount Sirio Type – Wing / Light Bar Antenna Mount – CB / Ham Radio** **Strong Ground Plane • Versatile Fit • Professional Install** This **Sirio type DV mount with 3/8 thread** allows you to **securely mount CB or amateur radio aerials** on **vehicle wings, light bars, or flat panels**. 👉 A popular choice for **4x4s, vans, trucks, and taxis**. --- ### 🔥 **Why Choose This DV Mount** ✔ **Standard 3/8 Thread – Fits Most Aerials** ✔ **Ideal for Wing or Light Bar Mounting** ✔ **Strong & Stable Installation** ✔ **Provides Excellent Ground Plane** --- ### ✅ **Key Features** ✔ **Sirio Type DV Mount** ✔ **3/8 Thread for CB & Ham Antennas** ✔ **Wing / Panel / Light Bar Mounting** ✔ **Durable Construction** ✔ **Clean & Professional Installation** --- ### 🚙 **Perfect For** - Land Rover Defender builds - 4×4 & off-road vehicles - Vans & trucks - Taxis & commercial vehicles - General mobile radio setups --- ### 📡 **Common Use** Often seen mounted on: - Wing panels - Light bars - Bull bars 👉 Frequently paired with **springer or stinger aerials**. --- ### ⚙️ **Specifications** - Type: **DV Mount (Sirio Style)** - Thread: **3/8 Standard** - Mounting: **Flat Surface Installation** - Use: **CB & Amateur Radio Antennas** --- ### 💡 **Why This Mount Works Well** ✔ Provides a **solid electrical ground** ✔ Improves antenna performance ✔ Stable mounting in harsh conditions 👉 A **proven mounting solution**. --- ### 🔧 **Installation Tips** ✔ Mount on a **flat metal surface** ✔ Ensure **good earth/ground connection** ✔ Position for **maximum antenna clearance** --- ### ⚠️ **Important Notes** ❗ Designed for **3/8 threaded aerials only** ❗ Best performance requires proper grounding --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Springer & stinger aerials - Coax cable & connectors - SWR meters & tuning tools - Other mounts & brackets --- ### 🔥 **Order Today** **Mount it right. Ground it properly. Perform at your best.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/fire-stick-3-8-n-dv-base-mount-and-cable-kit-for-cb-aerial-or-ham-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/fire-stick-3-8-n-dv-base-mount-and-cable-kit-for-cb-aerial-or-ham-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/fire-stick-3-8-n-dv-base-mount-and-cable-kit-for-cb-aerial-or-ham-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/fire-stick-3-8-n-dv-base-mount-and-cable-kit-for-cb-aerial-or-ham-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20FIRE-STICK%203%2F8%20%27N%27%20DV%20Base%20Mount%20and%20cable%20Kit%20for%20CB%20aerial%20or%20Ham%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ffire-stick-3-8-n-dv-base-mount-and-cable-kit-for-cb-aerial-or-ham-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/fire-stick-3-8-n-dv-base-mount-and-cable-kit-for-cb-aerial-or-ham-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/fire-stick-3-8-n-dv-base-mount-and-cable-kit-for-cb-aerial-or-ham-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/fire-stick-3-8-n-dv-base-mount-and-cable-kit-for-cb-aerial-or-ham-antenna/?share=telegram) - **Product categories:** DV Mounts --- ### [Wing nut and bolt for Sirio DV27 swivel Mount DV 27 antenna](https://cbradio.co.uk/product/wing-nut-and-bolt-to-use-with-sirio-dv27-mount-cb-radio-aerial-dv-27-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **Sirio DV Wing Nut & Bolt – Aerial Swivel Mount Hardware – DV Mount / Banjo Fitting** **Essential DV Mount Hardware – Adjust Your Aerial with Ease** This **Sirio-style DV wing nut and bolt** is designed for use with **DV mounts and DV banjo adaptors**, allowing your aerial to **tilt and lock securely in position**. 👉 A simple but essential part for **flexible antenna positioning**. --- ### ✅ **Key Features** ✔ **Designed for DV Mount Systems** ✔ **Wing Nut for Easy Adjustment (Tool-Free)** ✔ **Strong Bolt Fixing for Secure Hold** ✔ **Durable Metal Construction** ✔ **Compatible with Sirio-Type Mounts** --- ### 📡 **Perfect For** - DV aerial mounts - Banjo mount adaptors - CB radio installations - Amateur (Ham) radio setups - Vehicle antenna systems --- ### 💡 **Why You Need This** A DV mount allows your antenna to **pivot and adjust angle**, making it ideal when: ✔ Driving under **low bridges** ✔ Entering **car parks** ✔ Avoiding **tree branches (green laning)** ✔ Transport or storage 👉 Simply loosen, tilt, and tighten – quick and easy. --- ### 🔧 **Compatibility** ✔ Fits **Sirio-style DV mounts** ✔ Works with **DV banjo converters** *(see our shop)* --- ### ⚙️ **Specifications** - Type: **DV Wing Nut & Bolt Set** - Use: **Aerial tilt / swivel adjustment** - Construction: **Durable Metal** - Operation: **Manual (tool-free wing nut)** --- ### ⚠️ **Important Notes** ❗ Designed for **DV mount systems only** ❗ Check compatibility before purchase --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - DV mounts & banjo adaptors - Aerials & antennas - Coax cable & connectors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Adjust it. Tilt it. Protect your aerial.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/wing-nut-and-bolt-to-use-with-sirio-dv27-mount-cb-radio-aerial-dv-27-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/wing-nut-and-bolt-to-use-with-sirio-dv27-mount-cb-radio-aerial-dv-27-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/wing-nut-and-bolt-to-use-with-sirio-dv27-mount-cb-radio-aerial-dv-27-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/wing-nut-and-bolt-to-use-with-sirio-dv27-mount-cb-radio-aerial-dv-27-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Wing%20nut%20and%20bolt%20for%20Sirio%20DV27%20swivel%20Mount%20DV%2027%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fwing-nut-and-bolt-to-use-with-sirio-dv27-mount-cb-radio-aerial-dv-27-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/wing-nut-and-bolt-to-use-with-sirio-dv27-mount-cb-radio-aerial-dv-27-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/wing-nut-and-bolt-to-use-with-sirio-dv27-mount-cb-radio-aerial-dv-27-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/wing-nut-and-bolt-to-use-with-sirio-dv27-mount-cb-radio-aerial-dv-27-antenna/?share=telegram) - **Product categories:** CB radio Accessories, DV Mounts --- ### [Straight 3/8 DV Base Power Stick Mount Kit For CB aerial or Ham Antenna 4m RG58](https://cbradio.co.uk/product/straight-3-8-dv-base-power-stick-mount-kit-for-cb-aerial-or-ham-antenna-4m-rg58/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3/8 DV Base Power Stick Mount Kit** is a **versatile mounting solution**, designed to **securely fit any 3/8 threaded CB or ham antenna** to your vehicle. Perfect for **wing, light bar, or flat surface installs**, giving a **clean and effective aerial setup**. --- ## 🔩 Universal 3/8″ Fitment ✔ Accepts most CB & ham antennas ✔ Compatible with springers, stingers & whips ✔ Standard **3/8 thread** --- ## 🚗 Ideal Mounting Positions ✔ Wing mounts (common on 4x4s) ✔ Light bars ✔ Flat body panels ✔ Flexible installation options --- ## 🔌 Complete Kit ✔ **DV base mount** ✔ **4 metres RG58 coax cable** ✔ **PL259 connector fitted** ✔ Ready to install --- ## 📡 Strong Ground Plane Performance ✔ Designed for optimal grounding ✔ Improves signal efficiency ✔ Better transmit and receive (when installed correctly) --- ## 💪 Built for Vehicle Use Perfect for: - 4×4 vehicles (e.g. Defenders) - Vans and work vehicles - Trucks and taxis ✔ Handles real-world conditions --- ## 🔧 Easy Installation ✔ Mount to flat surface ✔ Route cable into vehicle ✔ Connect to radio ✔ Straightforward setup --- ## 📶 Reliable Signal Setup ✔ Ideal for CB and amateur radio use ✔ Stable performance ✔ Suitable for mobile installations --- ## 📦 What You Get ✔ 1 x 3/8 DV Base Power Stick Mount Kit ✔ 4m RG58 coax cable with PL259 --- ## Key Features - 3/8 DV base mount - Wing / light bar compatible - 4m RG58 cable included - PL259 connector fitted - Ready to install --- ## Why Choose This Mount? ✔ Flexible mounting options ✔ Clean installation ✔ Reliable performance ✔ Great value --- ## Ideal For - 4×4 owners - Off-road setups - Work vehicles - CB & ham radio users --- ## Straight Talking If you want a **proper mounted aerial setup without drilling your roof**, this is the way to do it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/straight-3-8-dv-base-power-stick-mount-kit-for-cb-aerial-or-ham-antenna-4m-rg58/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/straight-3-8-dv-base-power-stick-mount-kit-for-cb-aerial-or-ham-antenna-4m-rg58/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/straight-3-8-dv-base-power-stick-mount-kit-for-cb-aerial-or-ham-antenna-4m-rg58/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/straight-3-8-dv-base-power-stick-mount-kit-for-cb-aerial-or-ham-antenna-4m-rg58/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Straight%203%2F8%20DV%20Base%20Power%20Stick%20Mount%20Kit%20For%20CB%20aerial%20or%20Ham%20Antenna%204m%20RG58&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fstraight-3-8-dv-base-power-stick-mount-kit-for-cb-aerial-or-ham-antenna-4m-rg58%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/straight-3-8-dv-base-power-stick-mount-kit-for-cb-aerial-or-ham-antenna-4m-rg58/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/straight-3-8-dv-base-power-stick-mount-kit-for-cb-aerial-or-ham-antenna-4m-rg58/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/straight-3-8-dv-base-power-stick-mount-kit-for-cb-aerial-or-ham-antenna-4m-rg58/?share=telegram) - **Product categories:** DV Mounts --- ### [3/8 DV CB antenna aerial body wing light bar mount & cable kit Disco Discovery](https://cbradio.co.uk/product/3-8-dv-cb-antenna-aerial-body-wing-light-bar-mount-cable-kit-disco-discovery/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3/8 DV Wing Mount Kit with Cable** is a **heavy-duty Sirio-type mounting solution**, designed for **wing, light bar, or flat panel installations**. Perfect for fitting **3/8 threaded CB or amateur radio antennas** on vehicles like the **Land Rover Defender** and Land Rover Discovery. --- ## 🔩 3/8″ Antenna Compatibility ✔ Standard **3/8 thread fitting** ✔ Works with most CB and ham radio aerials ✔ Ideal for springer and whip antennas --- ## 🔄 DV Style Mount Base ✔ Sirio-type DV mount design ✔ Strong and reliable connection ✔ Suitable for permanent installs --- ## 🔌 Complete Cable Kit ✔ Approx **4 metres RG58 coax cable** ✔ **PL259 connector fitted** ✔ Ready to connect to your radio --- ## 🚙 Ideal Mounting Positions Perfect for: - Wing mounting (Defender / Discovery) - Light bars - Flat panels - Roof racks ✔ Flexible install options --- ## 📡 Improved Ground Plane ✔ Excellent grounding when mounted to metal surfaces ✔ Better signal performance ✔ Stable antenna operation --- ## 💪 Built for Tough Use ✔ Designed for off-road conditions ✔ Strong and durable ✔ Handles vibration and movement --- ## 🔧 Installation Notes ✔ Best mounted on a **flat metal surface** ✔ Ensure good earth/ground contact ✔ Suitable for permanent installations --- ## 📦 What You Get ✔ DV mount base ✔ 3/8 antenna fitting ✔ 4m RG58 coax cable with PL259 --- ## Key Features - 3/8″ antenna mount - DV (Sirio type) base - 4m RG58 cable - PL259 connector - Suitable for wing/light bar installs --- ## Why Choose This Mount? ✔ Strong and reliable ✔ Ideal for 4×4 setups ✔ Improves antenna performance ✔ Complete ready-to-fit kit --- ## Ideal For - Land Rover Defender & Discovery owners - 4×4 and off-road vehicles - Vans, trucks and taxis - Permanent antenna installations --- ## Straight Talking If you want a **solid, no-nonsense mount that works properly off-road**, this is it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-8-dv-cb-antenna-aerial-body-wing-light-bar-mount-cable-kit-disco-discovery/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-8-dv-cb-antenna-aerial-body-wing-light-bar-mount-cable-kit-disco-discovery/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-8-dv-cb-antenna-aerial-body-wing-light-bar-mount-cable-kit-disco-discovery/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-8-dv-cb-antenna-aerial-body-wing-light-bar-mount-cable-kit-disco-discovery/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%2F8%20DV%20CB%20antenna%20aerial%20body%20wing%20light%20bar%20mount%20%26%20cable%20kit%20Disco%20Discovery&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-8-dv-cb-antenna-aerial-body-wing-light-bar-mount-cable-kit-disco-discovery%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-8-dv-cb-antenna-aerial-body-wing-light-bar-mount-cable-kit-disco-discovery/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-8-dv-cb-antenna-aerial-body-wing-light-bar-mount-cable-kit-disco-discovery/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-8-dv-cb-antenna-aerial-body-wing-light-bar-mount-cable-kit-disco-discovery/?share=telegram) - **Product categories:** DV Mounts --- ### [Straight 3/8 DV27 CB HAM antenna aerial body wing mount & cable kit Defender 90](https://cbradio.co.uk/product/straight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3/8 Wing Mount Kit (Sirio DV Type)** is a **solid, low-profile mounting solution** designed to fit **3/8 threaded CB or amateur radio antennas**. Commonly used on **Land Rover Defender wings or light bars**, this mount provides a **clean install and excellent grounding when fitted correctly**. --- ## 🔩 Designed for 3/8″ Antennas ✔ Standard **3/8 thread fitting** ✔ Compatible with most CB and ham aerials ✔ Ideal for springer and whip antennas --- ## 🚙 Perfect for Defender & 4×4 Setups Commonly used on: - Land Rover Defender wing mounts - Light bars - Flat panel surfaces ✔ Proven off-road setup --- ## 📡 Superior Ground Plane ✔ Best performance when mounted on flat metal surface ✔ Improved signal efficiency ✔ Stable SWR when installed correctly --- ## 🔌 Includes Cable ✔ Supplied with coax cable ✔ Ready for connection to your radio ✔ Clean installation setup --- ## 🔧 Sirio Type DV Mount - Reliable DV-style mounting system - Strong and secure fit - Widely used in mobile installs --- ## 🚛 Versatile Use Also suitable for: - Vans - Trucks and lorries - Taxis - General 4×4 vehicles --- ## ⚙️ Installation Notes - Best mounted on **flat metal surface** - Ensure good grounding for best performance - Suitable for wing or panel mounting --- ## Key Features - 3/8″ antenna mount - Sirio DV style base - Cable included - Suitable for CB & ham antennas - Ideal for wing mounting --- ## Why Choose This Mount? ✔ Clean and professional install ✔ Strong and reliable design ✔ Great grounding performance ✔ Widely used on Defenders --- ## Ideal For - Land Rover Defender owners - Off-road vehicles - CB radio installs - Amateur radio setups --- ## Straight Talking Fit it properly on a good flat panel and you’ll get **solid performance without the hassle**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/straight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/straight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/straight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/straight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Straight%203%2F8%20DV27%20CB%20HAM%20antenna%20aerial%20body%20wing%20mount%20%26%20cable%20kit%20Defender%2090&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fstraight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/straight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/straight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/straight-3-8-dv27-cb-ham-antenna-aerial-body-wing-mount-cable-kit-defender-90/?share=telegram) - **Product categories:** DV Mounts --- ### [Genuine Sirio new N-PL DV to SO239 body mount](https://cbradio.co.uk/product/genuine-sirio-new-n-pl-dv-to-so239-body-mount-for-cb-aerial-or-ham-radio-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Sirio DV to SO239 Body Mount** is a **high-quality antenna base** designed to convert **DV-type installations to SO239**, allowing use with a wide range of **CB and VHF/UHF antennas**. Built by Sirio, this mount offers **reliable performance, durability, and a clean professional install**. --- ## 🔄 DV to SO239 Conversion ✔ Converts **DV mount → SO239 connection** ✔ Allows use of PL259-compatible antennas ✔ Ideal for mixed or upgraded setups --- ## 📡 Wide Compatibility Suitable for: - Sirio CB antennas - VHF / UHF amateur radio antennas - Mobile antenna installations ✔ Flexible and adaptable --- ## 💪 Genuine Sirio Quality ✔ Premium build quality ✔ Reliable performance ✔ Trusted brand in antenna systems --- ## 🌧 Weather Protection Included ✔ Supplied with **weather cap** ✔ Helps prevent water ingress ✔ Protects mount when not in use --- ## 🔧 Updated Design (Important) - New design uses **single locking nut** - Replaces older **3-prong washer style** - Compatible with **new style DV male plug** ⚠️ **Brass pin no longer supplied by Sirio** --- ## 🔌 Installation Notes - Requires **DV connector underneath** - Needs **DV cable with male DV plug to PL259** - These are available separately ✔ Ensure correct setup before installation --- ## 🛠 Clean Body Mount Installation - Ideal for panel/body mounting - Secure and professional finish - Suitable for cars, vans and 4x4s --- ## Key Features - DV to SO239 antenna mount - Sirio high quality product - Weather cap included - Updated locking nut design - Compatible with CB & ham antennas --- ## Why Choose This Mount? ✔ Converts DV to standard SO239 ✔ Reliable Sirio construction ✔ Weather protected ✔ Ideal for professional installs --- ## Ideal For - CB radio users - Amateur radio operators - Vehicle antenna installations - Upgrading DV setups --- ## Straight Talking This is a **proper conversion mount — just make sure you’ve got the correct DV cable to go with it**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/genuine-sirio-new-n-pl-dv-to-so239-body-mount-for-cb-aerial-or-ham-radio-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/genuine-sirio-new-n-pl-dv-to-so239-body-mount-for-cb-aerial-or-ham-radio-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/genuine-sirio-new-n-pl-dv-to-so239-body-mount-for-cb-aerial-or-ham-radio-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/genuine-sirio-new-n-pl-dv-to-so239-body-mount-for-cb-aerial-or-ham-radio-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Genuine%20Sirio%20new%20N-PL%20DV%20to%20SO239%20body%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fgenuine-sirio-new-n-pl-dv-to-so239-body-mount-for-cb-aerial-or-ham-radio-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/genuine-sirio-new-n-pl-dv-to-so239-body-mount-for-cb-aerial-or-ham-radio-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/genuine-sirio-new-n-pl-dv-to-so239-body-mount-for-cb-aerial-or-ham-radio-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/genuine-sirio-new-n-pl-dv-to-so239-body-mount-for-cb-aerial-or-ham-radio-antenna/?share=telegram) - **Product categories:** DV Mounts --- ### [Sirio Classic DV27 Mount Wing Nut Mounting](https://cbradio.co.uk/product/sirio-classic-dv27-mount-for-wing-nut-mounting-dv-27-antenna-cb-aerial-angle/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Sirio Type DV 27 Body Mount** is a **low-profile antenna base** designed for **permanent vehicle installations**. Ideal for users who want a **clean, discreet mounting solution**, while still allowing **angle adjustment for correct antenna positioning**. --- ## 🚗 Low Profile Installation ✔ Sits flush to vehicle body ✔ Clean, professional finish ✔ Ideal for permanent installs --- ## 🔧 Adjustable Angle Function - Designed for use with **wing nut & bolt (not included)** - Allows antenna to be angled correctly - Helps clear bodywork or obstacles ✔ Get your antenna upright and working properly --- ## 📡 Compatible with DV Antennas - Designed for **DV-type CB aerials** - Common standard in many mobile installs - Strong and secure mounting --- ## 🔄 Expandable Compatibility - Can be adapted to **3/8″ antennas** using a DV banjo adaptor - See our separate listing for compatible adaptor ✔ Flexible setup options --- ## ⚠️ Important Connection Info - Uses **TA connection (not standard SO239)** - **Does NOT accept PL259 directly** - Requires a **DV elbow connector** for coax connection ✔ Make sure you have the correct connector --- ## 💪 Durable Construction ✔ Strong and reliable design ✔ Built for long-term outdoor use ✔ Suitable for all weather conditions --- ## 🔧 Installation - Panel/body mount fitting - Secure underside fixing - Professional install required for best results --- ## Key Features - DV 27 body mount - Low profile design - Adjustable antenna angle - Compatible with DV antennas - Adaptable to 3/8″ (with adaptor) --- ## Why Choose This Mount? ✔ Clean, permanent installation ✔ Adjustable for optimal performance ✔ Strong and durable ✔ Flexible compatibility options --- ## Ideal For - Permanent CB installs - Cars, vans and 4x4s - Low profile antenna setups - Professional installations --- ## Straight Talking This is the mount for a **proper flush install — just make sure you’ve got the right connectors**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-classic-dv27-mount-for-wing-nut-mounting-dv-27-antenna-cb-aerial-angle/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-classic-dv27-mount-for-wing-nut-mounting-dv-27-antenna-cb-aerial-angle/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-classic-dv27-mount-for-wing-nut-mounting-dv-27-antenna-cb-aerial-angle/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-classic-dv27-mount-for-wing-nut-mounting-dv-27-antenna-cb-aerial-angle/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20Classic%20DV27%20Mount%20Wing%20Nut%20Mounting&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-classic-dv27-mount-for-wing-nut-mounting-dv-27-antenna-cb-aerial-angle%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-classic-dv27-mount-for-wing-nut-mounting-dv-27-antenna-cb-aerial-angle/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-classic-dv27-mount-for-wing-nut-mounting-dv-27-antenna-cb-aerial-angle/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-classic-dv27-mount-for-wing-nut-mounting-dv-27-antenna-cb-aerial-angle/?share=telegram) - **Product categories:** DV Mounts --- ### [DV to 3/8 Banjo Adaptor DV mount to 3/8](https://cbradio.co.uk/product/dv-to-3-8-banjo-adaptor-converts-dv-mount-to-3-8-cb-aerial-fitting/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **DV to 3/8″ Banjo Adaptor** (Sirio type) is a **simple but essential accessory** that allows you to **convert DV mount antennas to standard 3/8″ thread fittings**. Perfect for setups where you need **angle adjustment**, especially on mirrors, brackets or awkward mounting positions. --- ## 🔄 DV to 3/8″ Conversion ✔ Converts **DV base antennas → 3/8″ thread** ✔ Expands compatibility with a wide range of antennas ✔ Works with most standard CB mounts --- ## 🔧 Adjustable Angle Function - Designed for use with **wing nut & bolt fittings** - Allows antenna to be **angled correctly** - Helps avoid bodywork and obstacles ✔ Get the correct upright position --- ## 🚛 Ideal for Trucks & 4x4s Perfect for: - Mirror arm mounts - Bull bars and roof racks - Off-road vehicles ✔ Designed for real-world installs --- ## 💪 Strong Metal Construction - Durable and robust - Built to handle vibration and movement - Long-lasting performance --- ## 📡 Improves Installation Flexibility ✔ Mount antennas where standard fittings won’t work ✔ Adjust angle for better performance ✔ Avoid damage to antenna or vehicle --- ## Key Features - DV to 3/8″ adaptor - Banjo-style adjustable fitting - Compatible with standard CB antennas - Strong metal construction - Easy to install --- ## Why Choose This Adaptor? ✔ Solves awkward mounting issues ✔ Increases antenna compatibility ✔ Allows correct antenna positioning ✔ Simple but essential upgrade --- ## Ideal For - Truck drivers - 4×4 and off-road setups - Mirror mount installations - Custom antenna setups --- ## Straight Talking If your antenna won’t sit right, this is the **small part that fixes a big problem**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/dv-to-3-8-banjo-adaptor-converts-dv-mount-to-3-8-cb-aerial-fitting/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/dv-to-3-8-banjo-adaptor-converts-dv-mount-to-3-8-cb-aerial-fitting/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/dv-to-3-8-banjo-adaptor-converts-dv-mount-to-3-8-cb-aerial-fitting/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/dv-to-3-8-banjo-adaptor-converts-dv-mount-to-3-8-cb-aerial-fitting/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DV%20to%203%2F8%20Banjo%20Adaptor%20DV%20mount%20to%203%2F8&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdv-to-3-8-banjo-adaptor-converts-dv-mount-to-3-8-cb-aerial-fitting%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/dv-to-3-8-banjo-adaptor-converts-dv-mount-to-3-8-cb-aerial-fitting/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/dv-to-3-8-banjo-adaptor-converts-dv-mount-to-3-8-cb-aerial-fitting/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/dv-to-3-8-banjo-adaptor-converts-dv-mount-to-3-8-cb-aerial-fitting/?share=telegram) - **Product categories:** DV Mounts --- ### [Rail or roof rack light bar mount 3/8 stud for CB ham aerial](https://cbradio.co.uk/product/rail-or-roof-rack-light-bar-mount-3-8-stud-for-cb-ham-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙📡 **Heavy Duty Roof Rack / Rail CB Antenna Mount – 3/8 Stud + SO239 – 4m Cable Kit** **Ultra Strong • Flexible Setup • Built for Tough Use** This **heavy-duty roof rack / rail antenna mount** is designed as a **stronger alternative to standard mirror mounts**, giving you a **secure and reliable installation** for CB or amateur radio aerials. 👉 Ideal for **4×4, vans, trucks, and off-road vehicles**. --- ### 🔥 **Why Choose This Mount** ✔ **Extra Heavy-Duty Construction** ✔ **Double Groove Clamp for Secure Fit** ✔ **4 Bolt Design for Maximum Strength** ✔ **Quick Disconnect Cable System (SO239)** ✔ **Supplied with Approx. 4m Coax Cable** --- ### 📦 **What’s Included** ✔ **Heavy Duty Rail / Roof Rack Mount** ✔ **3/8 x 24 Hex Stud Mount** ✔ **SO239 Connector Base** ✔ **Approx. 4 Metres Coax Cable** 👉 Complete solution for a **strong, reliable install**. --- ### 🚙 **Perfect For** - Roof racks - Roll bars & rails - 4×4 & off-road vehicles - Vans & campers - Trucks & plant machinery --- ### ⚙️ **Specifications** - Mount Type: **Rail / Roof Rack Clamp Mount** - Stud: **3/8 x 24 Thread** - Connector: **SO239 (UHF Female)** - Cable Length: **Approx. 4m** - Construction: **Heavy Duty Metal** --- ### 💡 **Why This Mount Stands Out** ✔ Stronger than flat bar mirror mounts ✔ Secure grip on round bars ✔ Easy cable disconnect when parked ✔ Built for demanding environments 👉 A **proper upgrade for serious users**. --- ### 🔧 **Installation** ✔ Clamp onto rail or roof rack ✔ Attach antenna to 3/8 stud ✔ Connect coax via SO239 👉 Quick and practical setup. --- ### ⚠️ **Important Notes** ❗ Ensure good grounding for best performance ❗ Suitable for round bars/rails within clamp range ❗ Antenna not included --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - CB antennas (Stinger / Springer / Whip) - Coax cable & connectors - SWR meters - Mounting accessories --- ### 🔥 **Order Today** **Mount it stronger. Run it better. Built for real use.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rail-or-roof-rack-light-bar-mount-3-8-stud-for-cb-ham-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rail-or-roof-rack-light-bar-mount-3-8-stud-for-cb-ham-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rail-or-roof-rack-light-bar-mount-3-8-stud-for-cb-ham-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rail-or-roof-rack-light-bar-mount-3-8-stud-for-cb-ham-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Rail%20or%20roof%20rack%20light%20bar%20mount%203%2F8%20stud%20for%20CB%20ham%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frail-or-roof-rack-light-bar-mount-3-8-stud-for-cb-ham-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rail-or-roof-rack-light-bar-mount-3-8-stud-for-cb-ham-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rail-or-roof-rack-light-bar-mount-3-8-stud-for-cb-ham-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rail-or-roof-rack-light-bar-mount-3-8-stud-for-cb-ham-aerial/?share=telegram) - **Product categories:** Mirror Mounts --- ### [large washer roof body CB aerial stud mount kit so239 to 3/8 with 4m rg58](https://cbradio.co.uk/product/large-washer-roof-body-cb-aerial-stud-mount-kit-so239-to-3-8-with-4m-rg58/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **Heavy Duty Roof / Body CB Aerial Mount – 3/8 Stud to SO239 – Large Washer Kit – 4m RG58** **Strong, Clean Install – Built for Permanent Mounting** This **heavy duty 3/8 stud mount kit** with **large washer support** is designed for **roof or body mounting**, giving you a **secure, professional antenna installation**. 👉 Ideal for **CB and amateur radio setups requiring a solid fixed mount**. --- ### 💪 **Heavy Duty Design** ✔ **Large Reinforcement Washer** – spreads load & strengthens mounting point ✔ **Solid 3/8 Stud Mount** – fits most CB aerials ✔ Built for **permanent installations** --- ### ✅ **Complete Kit Includes** ✔ **3/8 Stud Mount (Heavy Duty)** ✔ **SO239 Base Connection** ✔ **Large Washer for Reinforcement** ✔ **4 Metres High Quality RG58 Cable** ✔ **PL259 Connector (Radio End)** --- ### 📡 **Perfect For** - Roof-mounted CB aerials - Body panel installations - 4×4 & off-road vehicles - Vans & commercial vehicles - Permanent antenna setups --- ### 🔧 **Why Use a Large Washer Mount** Standard mounts: - Can flex thin panels - Risk damage over time 👉 The large washer: ✔ Distributes load ✔ Strengthens mounting point ✔ Improves long-term durability --- ### ⚙️ **Specifications** - Mount Type: **Roof / Body Stud Mount Kit** - Fitting: **3/8 Stud (CB Standard)** - Base: **SO239 (UHF Female)** - Cable: **Approx. 4 Metres RG58** - Connector: **PL259 (Radio End)** --- ### 💡 **Installation Benefits** ✔ Clean, low-profile finish ✔ Strong grounding for better performance ✔ Suitable for heavy antennas --- ### ⚠️ **Important Notes** ❗ Requires drilling for installation ❗ Ensure correct positioning for best signal ❗ Check panel thickness before fitting --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB aerials (Springer, Stinger, Bullwhip) - SWR meters & tuning tools - Coax cable & connectors - Mount accessories --- ### 🔥 **Order Today** **Solid mount. Clean install. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-washer-roof-body-cb-aerial-stud-mount-kit-so239-to-3-8-with-4m-rg58/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-washer-roof-body-cb-aerial-stud-mount-kit-so239-to-3-8-with-4m-rg58/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-washer-roof-body-cb-aerial-stud-mount-kit-so239-to-3-8-with-4m-rg58/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-washer-roof-body-cb-aerial-stud-mount-kit-so239-to-3-8-with-4m-rg58/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20large%20washer%20roof%20body%20CB%20aerial%20stud%20mount%20kit%20so239%20to%203%2F8%20with%204m%20rg58&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-washer-roof-body-cb-aerial-stud-mount-kit-so239-to-3-8-with-4m-rg58%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-washer-roof-body-cb-aerial-stud-mount-kit-so239-to-3-8-with-4m-rg58/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-washer-roof-body-cb-aerial-stud-mount-kit-so239-to-3-8-with-4m-rg58/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-washer-roof-body-cb-aerial-stud-mount-kit-so239-to-3-8-with-4m-rg58/?share=telegram) - **Product categories:** Stud Mounts --- ### [flat bar mirror rail mount with 4m cable for 3/8 CB aerial antenna](https://cbradio.co.uk/product/flat-bar-mirror-rail-mount-with-4m-cable-for-3-8-cb-aerial-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚛 **Flat Bar Mirror / Roof Rack Mount – 3/8 Stud – CB Aerial Bracket – 4m Cable** **Strong, Simple & Reliable Mounting Solution** This **heavy-duty flat bar mirror / roof rack mount** is designed to securely hold your **CB aerial**, making it ideal for **trucks, vans, 4x4s, and commercial vehicles**. 👉 A solid, dependable option for everyday use. --- ### ✅ **Key Features** ✔ **3/8 x 24 Stud Mount** – fits most CB antennas ✔ **Approx. 4 Metres RG58 Cable Included** ✔ **PL259 Connector (Radio End)** ✔ **Heavy Duty Metal Construction** ✔ **Simple & Secure Installation** --- ### 💪 **Durable Design** ✔ **Single Groove Clamp** – strong grip on flat surfaces ✔ **2 Bolt Fixing System** – secure and stable ✔ Built for **daily use and tough environments** --- ### 🚛 **Perfect For** - Trucks / HGVs - Vans & commercial vehicles - 4×4 & off-road vehicles - Roof racks & mirror arms - Light bar mounting points --- ### 📡 **Compatible With** - Springer antennas - Stinger aerials - Whip antennas - Most **3/8 thread CB aerials** --- ### ⚙️ **Specifications** - Mount Type: **Flat Bar Mirror / Roof Rack Mount** - Fitting: **3/8 x 24 Stud** - Cable: **Approx. 4 Metres RG58** - Connector: **PL259 (Radio End)** - Fixing: **2 Bolt Clamp System** --- ### ⚠️ **Why Choose This Mount** Cheaper mounts: - Flex under load - Loosen over time - Offer poor support 👉 This is a **reliable, heavy-duty mounting solution built for real use**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB aerials (Mini & XL Springers) - SWR meters & tuning tools - Coax cable & connectors - Alternative heavy-duty mounts --- ### 🔥 **Order Today** **Simple fit. Strong hold. Ready for the road.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/flat-bar-mirror-rail-mount-with-4m-cable-for-3-8-cb-aerial-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/flat-bar-mirror-rail-mount-with-4m-cable-for-3-8-cb-aerial-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/flat-bar-mirror-rail-mount-with-4m-cable-for-3-8-cb-aerial-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/flat-bar-mirror-rail-mount-with-4m-cable-for-3-8-cb-aerial-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20flat%20bar%20mirror%20rail%20mount%20with%204m%20cable%20for%203%2F8%20CB%20aerial%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fflat-bar-mirror-rail-mount-with-4m-cable-for-3-8-cb-aerial-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/flat-bar-mirror-rail-mount-with-4m-cable-for-3-8-cb-aerial-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/flat-bar-mirror-rail-mount-with-4m-cable-for-3-8-cb-aerial-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/flat-bar-mirror-rail-mount-with-4m-cable-for-3-8-cb-aerial-antenna/?share=telegram) - **Product categories:** Mirror Mounts --- ### [Heavy Duty right angle mirror or roof rack bar mount 3/8 stud for CB aerial](https://cbradio.co.uk/product/heavy-duty-right-angle-mirror-or-roof-rack-bar-mount-3-8-stud-for-cb-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚛 **Heavy Duty Right Angle Mirror / Roof Rack Mount – 3/8 Stud CB Aerial Bracket – 4m Cable** **Professional Mounting Solution – Strong, Versatile & Built to Last** This **heavy duty right-angle mirror / roof rack mount** is designed for **secure CB antenna installation** on **trucks, vans, 4x4s, and roof racks**. 👉 Built for **strength, flexibility, and real-world use**. --- ### 💪 **Heavy Duty Construction** ✔ **Double Groove Design** – extra grip and stability ✔ **4 Bolt Clamp System** – secure mounting under load ✔ **Solid Metal Build** – built for harsh environments --- ### ✅ **Key Features** ✔ **3/8 x 24 Stud Mount** – fits most CB antennas ✔ **SO-239 Base Connection** – allows easy cable removal ✔ **Approx. 4 Metres Coax Cable Included** ✔ **PL259 Connector (Radio End)** ✔ **Right Angle Design** – ideal for mirror arms & roof bars --- ### 🔌 **Detachable Cable Advantage** Unlike fixed mounts: 👉 This **stud mount version allows you to disconnect the cable easily** - Ideal when parked - Reduces risk of damage or theft - Makes maintenance easier --- ### 🚛 **Perfect For** - Trucks / HGVs - Vans & Commercial Vehicles - 4×4 & Off-Road Vehicles - Roof Rack Installations - Mirror Arm Mounting --- ### 📡 **Compatible With** - Springer antennas - Stinger aerials - Whip antennas - Most **3/8 thread CB aerials** --- ### ⚙️ **Specifications** - Mount Type: **Right Angle Mirror / Roof Rack Mount** - Fitting: **3/8 x 24 Stud** - Base Connection: **SO-239** - Cable: **Approx. 4 Metres RG58** - Connector: **PL259 (Radio End)** - Fixing: **4 Bolt Clamp System** --- ### ⚠️ **Why Choose This Mount** Cheap mounts: - Flex under load - Loosen over time - Fail in tough conditions 👉 This is a **true heavy-duty mount built for daily use**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Other Options Available** 👉 Check our shop for: - SO239-only version - CB antennas (Mini & XL Springers) - Coax cable & connectors - SWR meters & tuning tools --- ### 🔥 **Order Today** **Strong mount. Clean install. Built for the road.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/heavy-duty-right-angle-mirror-or-roof-rack-bar-mount-3-8-stud-for-cb-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/heavy-duty-right-angle-mirror-or-roof-rack-bar-mount-3-8-stud-for-cb-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/heavy-duty-right-angle-mirror-or-roof-rack-bar-mount-3-8-stud-for-cb-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/heavy-duty-right-angle-mirror-or-roof-rack-bar-mount-3-8-stud-for-cb-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Heavy%20Duty%20right%20angle%20mirror%20or%20roof%20rack%20bar%20mount%203%2F8%20stud%20for%20CB%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fheavy-duty-right-angle-mirror-or-roof-rack-bar-mount-3-8-stud-for-cb-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/heavy-duty-right-angle-mirror-or-roof-rack-bar-mount-3-8-stud-for-cb-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/heavy-duty-right-angle-mirror-or-roof-rack-bar-mount-3-8-stud-for-cb-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/heavy-duty-right-angle-mirror-or-roof-rack-bar-mount-3-8-stud-for-cb-aerial/?share=telegram) - **Product categories:** Mirror Mounts --- ### [PSM1 Rear CB Aerial Body side Mount Land Rover DEFENDER 90 110 Lorry HGV 4X4 VAN](https://cbradio.co.uk/product/psm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PSM-1 Rear CB Aerial Mount** is a **heavy-duty rear body mount** designed specifically for **Land Rover Defender installations**. This is the **proper mount you’ll see on most Defenders**, trusted for its **strength, reliability, and off-road durability**. --- ## 🚙 Built for Land Rover Defender ✔ Designed for rear body mounting ✔ Fits Defender 90 & 110 ✔ Proven fitment and positioning ✔ The go-to mount for Defender owners --- ## 💪 Genuine Quality – Not Cheap Imports - Supplied from **OPEK** - Strong, reliable construction - Tested in real off-road conditions ✔ Built to stay put --- ## 🔩 Standard 3/8″ Stud Fitting - Fits most CB and amateur antennas - Compatible with springers, whips and fibreglass aerials ✔ Universal compatibility --- ## 📡 Ideal for Popular Antennas Works perfectly with antennas such as: - Mini Stinger CB Antenna - Other 3/8″ CB & ham aerials --- ## 🔧 Mount Only – Build Your Setup ⚠️ **This listing is for the mount only** ✔ Ideal if you already have cable and antenna ✔ Perfect for custom setups --- ## 🛠 Includes Fitting Instructions ✔ Step-by-step guidance included ✔ Install it the way we would --- ## 🚛 Versatile Fitment - Land Rover Defender - 4×4 vehicles - Trucks and vans - High roof vehicles ✔ Not limited to one vehicle type --- ## 💯 Tried & Tested ✔ Used and tested by us ✔ Proven reliability in harsh conditions ✔ Confidence guaranteed --- ## Key Features - Heavy duty rear body mount - 3/8″ antenna stud - OPEK quality construction - Defender-specific fit - Includes fitting instructions --- ## Why Choose This Mount? ✔ Proven Defender setup ✔ Stronger than cheap alternatives ✔ Reliable in off-road use ✔ Professional installation --- ## Ideal For - Land Rover Defender owners - Off-road vehicles - CB and ham radio users - Custom antenna installs --- ## Straight Talking This is the mount you fit when you **don’t want your aerial falling off halfway through a trail**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/psm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/psm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/psm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/psm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PSM1%20Rear%20CB%20Aerial%20Body%20side%20Mount%20Land%20Rover%20DEFENDER%2090%20110%20Lorry%20HGV%204X4%20VAN&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpsm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/psm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/psm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/psm1-rear-cb-aerial-body-side-mount-land-rover-defender-90-110-lorry-hgv-4x4-van/?share=telegram) - **Product categories:** Side Mounts --- ### [CB aerial mount 3/8 stud 7M cable for Land Rover Defender 110 PSM-1 4X4](https://cbradio.co.uk/product/cb-aerial-mount-3-8-stud-7m-cable-for-land-rover-defender-110-psm-1-4x4/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PSM-1 Defender Rear CB Aerial Mount** is the **go-to rear mount for Land Rover Defender owners** — the same style you’ll see on **most properly set up Defenders**. Built for strength and reliability, this kit comes **complete with high-quality coax and proper fitting instructions**, making installation straightforward. --- ## 🚙 Designed for Land Rover Defender ✔ Tailor-made for Defender models ✔ Ideal for **Defender 110 (7m cable included)** ✔ Also available in 5m version for Defender 90 ✔ Proper fit – no guesswork --- ## 💪 Heavy Duty Rear Mount - Strong, rugged construction - Designed for off-road use - Secure mounting at rear of vehicle ✔ Built to handle real conditions --- ## 📡 3/8″ Stud Fitting - Standard **3/8″ antenna mount** - Compatible with most CB & ham antennas - Works perfectly with popular whips like Stinger-type aerials --- ## 🔌 Premium Coax Included - **7 metres high-quality RG58U coax** - Terminated with **PL259 plug** - Made in-house – not cheap pre-made imports ✔ Better signal, better durability --- ## 🔧 Complete Installation Kit ✔ Mounting bracket ✔ 7m coax cable ✔ PL259 connector ✔ Step-by-step fitting instructions ✔ Fit it the right way first time --- ## 🚛 Multi-Vehicle Compatibility Also suitable for: - 4×4 vehicles - Trucks - High-roof vans (e.g. Transit) ✔ Versatile mounting solution --- ## 🛠 Built the Right Way ✔ Cable made from quality low-loss RG58 ✔ Proper lengths – no stretching or bodging ✔ Designed by people who actually install them --- ## Key Features - Defender rear antenna mount - 3/8″ stud fitting - 7m RG58U coax cable - PL259 connector - Heavy-duty construction --- ## Why Choose This Kit? ✔ Designed specifically for Defenders ✔ Includes proper length cable ✔ Strong and reliable mounting ✔ Comes with real fitting guidance --- ## Ideal For - Land Rover Defender 110 owners - Off-road setups - Overland builds - Professional CB installs --- ## Straight Talking This is the mount you see on **proper Defender setups** — because it works. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-aerial-mount-3-8-stud-7m-cable-for-land-rover-defender-110-psm-1-4x4/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-aerial-mount-3-8-stud-7m-cable-for-land-rover-defender-110-psm-1-4x4/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-aerial-mount-3-8-stud-7m-cable-for-land-rover-defender-110-psm-1-4x4/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-aerial-mount-3-8-stud-7m-cable-for-land-rover-defender-110-psm-1-4x4/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20aerial%20mount%203%2F8%20stud%207M%20cable%20for%20Land%20Rover%20Defender%20110%20PSM-1%204X4&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-aerial-mount-3-8-stud-7m-cable-for-land-rover-defender-110-psm-1-4x4%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-aerial-mount-3-8-stud-7m-cable-for-land-rover-defender-110-psm-1-4x4/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-aerial-mount-3-8-stud-7m-cable-for-land-rover-defender-110-psm-1-4x4/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-aerial-mount-3-8-stud-7m-cable-for-land-rover-defender-110-psm-1-4x4/?share=telegram) - **Product categories:** Side Mounts --- ### [CB Radio aerial mount 3/8 stud 5m cable for Land Rover Defender 90 PSM1](https://cbradio.co.uk/product/cb-radio-aerial-mount-3-8-stud-5m-cable-for-land-rover-defender-90-psm1-4x4/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PSM-1 Defender Rear CB Antenna Mount Kit** is a **heavy-duty, vehicle-specific mounting solution** designed for the iconic Land Rover Defender. This is the **classic rear-mounted setup** seen on most Defenders — giving you a **strong, reliable and professional CB installation**. --- ## 🚙 Designed for the Defender ✔ Tailor-made fit for **Defender 90 & 110** ✔ Proven mounting position used by off-roaders ✔ Clean, factory-style rear installation --- ## 📡 Universal 3/8″ Antenna Mount - Standard **3/8″ stud fitting** - Compatible with most CB & ham antennas - Works perfectly with springer / stinger type aerials --- ## 🔌 High Quality Coax Included - Approx. **5 metres RG58U coax cable** - Pre-fitted **PL259 connector** - Low-loss, high-quality cable (not cheap generic) ✔ Ready for a proper install --- ## 📏 Cable Length Options - **5m** – ideal for Defender 90 - **7m option available** – perfect for Defender 110 --- ## 🔧 Easy Installation ✔ Supplied with **step-by-step fitting instructions** ✔ Designed for straightforward DIY install ✔ Installed the same way professionals do it --- ## 💪 Built for Off-Road Use - Strong mounting design - Handles vibration and rough terrain - Ideal for 4×4 and expedition vehicles --- ## 🚐 Not Just for Defenders Also suitable for: - 4×4 vehicles - Trucks - High-roof vans (e.g. Transit) --- ## Key Features - Defender-specific CB mount - 3/8″ antenna stud - 5m RG58 coax cable - PL259 connector - Heavy-duty construction - Installation instructions included --- ## Why Choose This Kit? ✔ Proper fit for your vehicle ✔ High-quality cable (not cheap imports) ✔ Complete install solution ✔ Proven, popular setup --- ## Ideal For - Land Rover Defender owners - Off-road enthusiasts - Farmers and utility vehicles - Professional CB installs --- ## Straight Talking If you’ve got a Defender and want a **proper CB install that looks right and works properly**, this is the one. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-aerial-mount-3-8-stud-5m-cable-for-land-rover-defender-90-psm1-4x4/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-aerial-mount-3-8-stud-5m-cable-for-land-rover-defender-90-psm1-4x4/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-aerial-mount-3-8-stud-5m-cable-for-land-rover-defender-90-psm1-4x4/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-aerial-mount-3-8-stud-5m-cable-for-land-rover-defender-90-psm1-4x4/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20aerial%20mount%203%2F8%20stud%205m%20cable%20for%20Land%20Rover%20Defender%2090%20PSM1&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-aerial-mount-3-8-stud-5m-cable-for-land-rover-defender-90-psm1-4x4%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-aerial-mount-3-8-stud-5m-cable-for-land-rover-defender-90-psm1-4x4/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-aerial-mount-3-8-stud-5m-cable-for-land-rover-defender-90-psm1-4x4/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-aerial-mount-3-8-stud-5m-cable-for-land-rover-defender-90-psm1-4x4/?share=telegram) - **Product categories:** Side Mounts --- ### [roof stud aerial mount 3/8 to SO239](https://cbradio.co.uk/product/roof-stud-aerial-mount-3-8-to-so239-cb-ham-radio-mobile-antenna-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3/8″ to SO239 Roof Stud Antenna Mount** is the **most popular permanent mounting solution** for CB and ham radio antennas. Designed for **through-roof installation**, it provides a **solid, low-loss connection and the best possible grounding** — giving you maximum antenna performance. --- ## 📡 Professional Roof Mount Installation ✔ Permanent **through-roof mounting** ✔ Best grounding for optimal signal ✔ Cleaner and more efficient than mag mounts --- ## 🔌 3/8″ to SO239 Conversion - Top: **3/8″ stud fitting** (for antenna) - Bottom: **SO239 socket** (for PL259 coax plug) ✔ Standard, universal compatibility --- ## 💪 Heavy Duty Large Washer Design - Large washer for secure mounting - Strong, stable installation - Spreads load across panel ✔ Built for long-term use --- ## 🚗 Most Popular Mounting Method - Widely used on cars, vans and trucks - Preferred by serious CB users - Proven reliable setup --- ## ⚡ Improved Performance - Direct metal-to-body grounding - Reduced signal loss - Better SWR potential ✔ Maximum efficiency from your antenna --- ## 🔧 Installation Overview 1. Drill mounting hole in roof/panel 2. Fit stud mount securely 3. Connect coax to SO239 4. Attach antenna to 3/8″ stud ✔ Simple but effective --- ## Key Features - 3/8″ antenna stud mount - SO239 coax connection - Large washer design - Permanent installation - Heavy-duty construction --- ## Why Choose a Roof Stud Mount? ✔ Best possible antenna performance ✔ Strong, secure fitting ✔ Cleaner install than mag mounts ✔ Professional finish --- ## Ideal For - Permanent CB installations - Cars, vans and trucks - High-performance setups - Users wanting best signal quality --- ## Straight Talking If you want **the best performance from your antenna**, this is the proper way to mount it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/roof-stud-aerial-mount-3-8-to-so239-cb-ham-radio-mobile-antenna-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/roof-stud-aerial-mount-3-8-to-so239-cb-ham-radio-mobile-antenna-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/roof-stud-aerial-mount-3-8-to-so239-cb-ham-radio-mobile-antenna-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/roof-stud-aerial-mount-3-8-to-so239-cb-ham-radio-mobile-antenna-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20roof%20stud%20aerial%20mount%203%2F8%20to%20SO239&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Froof-stud-aerial-mount-3-8-to-so239-cb-ham-radio-mobile-antenna-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/roof-stud-aerial-mount-3-8-to-so239-cb-ham-radio-mobile-antenna-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/roof-stud-aerial-mount-3-8-to-so239-cb-ham-radio-mobile-antenna-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/roof-stud-aerial-mount-3-8-to-so239-cb-ham-radio-mobile-antenna-mount/?share=telegram) - **Product categories:** Stud Mounts --- ### [TURBO Magnetic Mag Mount for SIRIO CB Aerial or NR770 HAM Antenna SO239 Fitting](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🧲📡 **7″ Turbo Magnetic Mount SO-239 – Heavy Duty CB Antenna Mag Mount – RG58 PL259** **Extreme Grip • No Drill Install • Built Tough** The **7″ Turbo Mag Mount (SO-239 version)** is a **serious heavy-duty magnetic base** designed to hold even larger antennas securely at speed. 👉 If this doesn’t hold your aerial… nothing will. --- ### 🔥 **Why Choose This Mag Mount** ✔ **Massive 7″ Magnetic Base – Maximum Holding Power** ✔ **SO-239 Socket – Fits PL259 Antenna Plugs** ✔ **High Quality RG58 Cable Included** ✔ **Pre-Fitted PL259 Connector** ✔ **Protective Rubber Pad (Paint Safe)** --- ### 🧲 **Unmatched Holding Strength** This is not your average mag mount: ✔ Designed for **large antennas** ✔ Handles **high speeds & tough conditions** ✔ Strong enough to stay put where others fail 💪 *Make sure you’re strong enough to remove it!* --- ### 📡 **Perfect For** - CB radio installations - Amateur (Ham) radio setups - Trucks & vans - 4×4 & off-road vehicles - Temporary or removable installs --- ### ⚙️ **Specifications** - Base Size: **7 Inch Magnetic Mount** - Antenna Connection: **SO-239 (UHF Female)** - Cable: **RG58 Coax (Moulded Lead)** - Connector: **PL259 (Fitted)** - Protection: **Rubber Base Pad** --- ### 💡 **Why Choose SO-239 Version** ✔ Ideal for antennas with **PL259 connectors** ✔ Quick screw-on installation ✔ Strong, reliable RF connection --- ### 🔧 **Installation** ✔ Place on clean metal surface ✔ Route cable into vehicle ✔ Connect to radio 👉 No drilling required – install in minutes. --- ### ⚠️ **Important Notes** ❗ Designed for **SO-239 / PL259 antenna connections** ❗ Ensure surface is clean for maximum grip ❗ Strong magnet – handle with care --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Options Available** 👉 Check our shop for: - 3/8 thread version - CB antennas - Coax cable & connectors - Mounting accessories --- ### 🔥 **Order Today** **Maximum grip. Maximum confidence. No compromise.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TURBO%20Magnetic%20Mag%20Mount%20for%20SIRIO%20CB%20Aerial%20or%20NR770%20HAM%20Antenna%20SO239%20Fitting&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fturbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/turbo-magnetic-mag-mount-for-sirio-cb-aerial-or-nr770-ham-antenna-so239-fitting/?share=telegram) - **Product categories:** Mag Mounts --- ### [3 Way Guy Ring Spider Mast Collar Wire Rope Galvanised](https://cbradio.co.uk/product/3-way-guy-ring-spider-mast-collar-wire-rope-galvanised/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🗼🔧 **3 Way Guy Ring Mast Collar – Galvanised Steel – Spider Bracket for 1.5″–2″ Poles** **Stabilise Your Mast • Strong • Essential Support** This **3-way guy ring (spider mast collar)** is designed to **secure and stabilise aerial masts** by providing **anchor points for guy wires**. 👉 Essential for **safe and stable antenna installations**. --- ### 🔥 **Why Choose This Guy Ring** ✔ **3 Way Guy Wire Support** ✔ **Fits 1.5″–2″ (38–50mm) Masts** ✔ **Heavy Duty Galvanised Steel** ✔ **Improves Stability in Wind** --- ### ✅ **Key Features** ✔ **3 Way Spider Design** ✔ **Clamp-On Mast Collar** ✔ **Galvanised Steel – Corrosion Resistant** ✔ **Strong & Durable Construction** ✔ **Ideal for Portable or Permanent Setups** --- ### 📡 **Perfect For** - CB radio masts - Amateur (Ham) radio installations - TV aerial poles - Portable setups (SOTA / field use) - High mast installations --- ### ⚙️ **Specifications** - Type: **3 Way Guy Ring / Spider Collar** - Mast Size: **1.5″ – 2″ (38mm – 50mm)** - Material: **Galvanised Steel** - Function: **Guy Wire Attachment Points** --- ### 💡 **Why You Need a Guy Ring** Without proper support: - Masts can bend or fail - Risk of damage in wind - Unsafe installation 👉 This ring: ✔ Distributes load evenly ✔ Keeps mast upright ✔ Improves long-term reliability --- ### 🔧 **Installation** ✔ Clamp onto mast at required height ✔ Attach 3 guy ropes evenly spaced ✔ Tension for stability 👉 Simple but critical for **safe installs**. --- ### ⚠️ **Important Notes** ❗ Guy ropes/wires not included ❗ Ensure correct mast size before purchase ❗ Always secure properly in exposed locations --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Guy rope & tensioners - Mast poles & brackets - Antennas & mounts - Coax cable & connectors --- ### 🔥 **Order Today** **Secure it. Stabilise it. Do it properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-way-guy-ring-spider-mast-collar-wire-rope-galvanised/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%20Way%20Guy%20Ring%20Spider%20Mast%20Collar%20Wire%20Rope%20Galvanised&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-way-guy-ring-spider-mast-collar-wire-rope-galvanised%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=telegram) - **Product categories:** Installation aid --- ### [Heavy duty 3/8 Super stud Aerial Antenna mount](https://cbradio.co.uk/product/heavy-duty-3-8-super-stud-aerial-antenna-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **Extra Heavy Duty 3/8 Stud Antenna Mount – SO239 – Stainless Steel – Roof / Body Mount Kit** **Maximum Strength • Premium Build • Perfect for Aluminium Roofs** This **extra heavy duty 3/8 stud mount** is built for **serious antenna installations**, featuring **large stainless steel washers** for added strength—ideal for **vehicles with aluminium roofs or thin panels**. 👉 Designed for **permanent, high-strength mounting of CB & Ham aerials**. --- ### 💪 **Ultra Heavy Duty Construction** ✔ **2 x Large 64mm Stainless Steel Washers** – spreads load & reinforces panel ✔ **Stainless Steel Hardware** – corrosion resistant ✔ **Plated Brass Components** – excellent conductivity ✔ Built for **long-term durability in harsh conditions** --- ### ✅ **Key Features** ✔ **3/8 Stud Fitting** – standard CB antenna mount ✔ **SO239 Socket Base** – easy coax connection ✔ **Rubber Seal** – weatherproof installation ✔ **Nylon Shoulder Insulator** – electrical isolation ✔ **Heavy Duty Construction Throughout** --- ### 📡 **Perfect For** - Roof-mounted CB antennas - Aluminium roof vehicles - 4×4 & off-road builds - Vans & commercial vehicles - High-strength permanent installs --- ### 🔧 **Why This Mount Stands Out** Standard mounts: - Flex or damage panels - Lack proper reinforcement 👉 This mount: ✔ Distributes load evenly ✔ Prevents panel distortion ✔ Provides solid grounding ✔ Handles heavier antennas --- ### ⚙️ **Specifications** - Type: **Heavy Duty Stud Mount Kit** - Fitting: **3/8 Thread (CB Standard)** - Base: **SO239 (UHF Female)** - Washers: **2 x 64mm Stainless Steel** - Materials: **Stainless Steel / Brass / Nylon** --- ### 💡 **Ideal for Aluminium Roofs** Aluminium panels: - Softer than steel - More prone to distortion 👉 Large washers provide **extra support and protection**. --- ### ⚠️ **Important Notes** ❗ Requires drilling for installation ❗ Ensure correct positioning for best performance ❗ Suitable for antennas with **3/8 fitting** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB aerials (Springer, Stinger, Bullwhip) - Coax cable & connectors - SWR meters & tuning tools - Mount accessories --- ### 🔥 **Order Today** **Maximum strength. Clean install. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/heavy-duty-3-8-super-stud-aerial-antenna-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/heavy-duty-3-8-super-stud-aerial-antenna-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/heavy-duty-3-8-super-stud-aerial-antenna-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/heavy-duty-3-8-super-stud-aerial-antenna-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Heavy%20duty%203%2F8%20Super%20stud%20Aerial%20Antenna%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fheavy-duty-3-8-super-stud-aerial-antenna-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/heavy-duty-3-8-super-stud-aerial-antenna-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/heavy-duty-3-8-super-stud-aerial-antenna-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/heavy-duty-3-8-super-stud-aerial-antenna-mount/?share=telegram) - **Product categories:** Stud Mounts --- ### [Chimney lashing kit superior quality complete 6" TV Aerial mounting bracket](https://cbradio.co.uk/product/chimney-lashing-kit-superior-quality-complete-6-tv-aerial-mounting-bracket/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **6″ Galvanised Chimney Lashing Kit – Aerial Mast Mount Bracket – Complete Fixing Set** **Secure Chimney Mounting – No Drilling Required** This **6″ galvanised chimney lashing kit** is designed to **securely mount an aerial mast to a chimney stack**, providing a **strong and stable installation** without drilling into brickwork. 👉 Ideal for **CB, TV, and amateur radio aerial installations**. --- ### ✅ **Complete Kit – Everything Included** ✔ **1 x 6″ Chimney Mount Bracket** ✔ **5 Metres Lashing Wire** ✔ **2 x J Bolts** ✔ **2 x 1.5″ V Bolts** ✔ **3 x Corner Plates** 👉 All the essential parts for a **secure chimney installation**. --- ### 💪 **Built for Outdoor Use** ✔ **Hot Dip Galvanised Steel** – corrosion resistant ✔ **Strong, Durable Construction** ✔ Designed to withstand **weather and wind conditions** --- ### 📡 **Perfect For** - CB Radio Antennas - Amateur (Ham) Radio - TV Aerials - Base station installations - Chimney-mounted mast setups --- ### 🔧 **Easy Installation** - No drilling into chimney required - Lashing wire wraps around chimney stack - Bracket secures mast firmly in place 👉 A **safe and non-invasive mounting solution**. --- ### ⚠️ **Important Advice** ❗ For **top-heavy antennas or larger masts**: 👉 It is recommended to use **2 kits for added stability** --- ### ⚙️ **Specifications** - Bracket Height: **6 Inch** - Wire Length: **5 Metres** - Finish: **Galvanised Steel** - Application: **Chimney Mounting System** --- ### 💡 **Why Use a Chimney Lashing Kit** Alternative mounting methods: - Require drilling - Risk damaging brickwork - Can be less secure 👉 This provides a **strong, reliable, and chimney-safe solution**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mast poles & couplers - Antennas & aerials - Coax cable & connectors - Guy wire kits & brackets --- ### 🔥 **Order Today** **Secure mount. No drilling. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/chimney-lashing-kit-superior-quality-complete-6-tv-aerial-mounting-bracket/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/chimney-lashing-kit-superior-quality-complete-6-tv-aerial-mounting-bracket/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/chimney-lashing-kit-superior-quality-complete-6-tv-aerial-mounting-bracket/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/chimney-lashing-kit-superior-quality-complete-6-tv-aerial-mounting-bracket/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Chimney%20lashing%20kit%20superior%20quality%20complete%206%22%20TV%20Aerial%20mounting%20bracket&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fchimney-lashing-kit-superior-quality-complete-6-tv-aerial-mounting-bracket%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/chimney-lashing-kit-superior-quality-complete-6-tv-aerial-mounting-bracket/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/chimney-lashing-kit-superior-quality-complete-6-tv-aerial-mounting-bracket/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/chimney-lashing-kit-superior-quality-complete-6-tv-aerial-mounting-bracket/?share=telegram) - **Product categories:** Installation aid --- ### [Turbo Mag Magnetic Mount 7" for CB Aerial or HAM Antenna 3/8 Thread](https://cbradio.co.uk/product/turbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🧲📡 **7″ Turbo Mag Mount 3/8 Thread – Heavy Duty Magnetic Base – CB & Ham Antenna – RG58 + PL259** **Extreme Holding Power – Built for Serious Installations** The **7″ Turbo Magnetic Mount** is a **heavy-duty antenna base** designed to keep your aerial **firmly secured**, even at high speeds or in harsh conditions. 👉 If this doesn’t hold your antenna on the roof… **no single mag mount will!** --- ### 💪 **Maximum Holding Strength** 🧲 **Extra Large 7” Magnetic Base** - Ultra-strong grip for **high-speed driving** - Ideal for **larger or heavier antennas** - Stable even on rough terrain 👉 Make sure you’re strong enough to remove it! 😄 --- ### ✅ **Key Features** ✔ **3/8 Thread Fitting** – fits most CB antennas ✔ **4 Metres RG58 Coax Cable Included** ✔ **PL259 Connector (Radio End)** – ready to use ✔ **Waterproof Rubber Base Pad** – protects vehicle paint ✔ **Heavy Duty Construction** – built to last --- ### 📡 **Perfect For** - CB Radio Antennas (Springers, Stingers, Whips) - Amateur (Ham) Radio Antennas - Cars, Vans & Trucks - Temporary or removable installs --- ### ⚙️ **Specifications** - Mount Type: **Magnetic Base (Turbo)** - Diameter: **7 Inch** - Thread: **3/8 Standard CB Thread** - Cable: **Approx. 4 Metres RG58** - Connector: **PL259 (Radio End)** - Base: **Protective Rubber Pad** --- ### ⚠️ **Why Choose This Mount** Smaller or cheap mounts: - Don’t hold properly - Allow antenna movement - Can damage paint 👉 This mount provides **maximum stability and protection**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Other Options Available** 👉 Check our shop for: - **SO239 version** of this mount - CB antennas (Springers, XL, Mini, etc.) - Coax cable & connectors - SWR meters & tuning tools --- ### 🔥 **Order Today** **Maximum grip. Maximum confidence. Built for the road.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/turbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/turbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/turbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/turbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Turbo%20Mag%20Magnetic%20Mount%207%22%20for%20CB%20Aerial%20or%20HAM%20Antenna%203%2F8%20Thread&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fturbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/turbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/turbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/turbo-mag-magnetic-mount-7-for-cb-aerial-or-ham-antenna-3-8-thread/?share=telegram) - **Product categories:** Mag Mounts --- ### [Triple mag mount 3/8 stud aerial fitting](https://cbradio.co.uk/product/triple-mag-mount-3-8-stud-aerial-fitting-cb-ham-radio-antenna-tri-magnet-base/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Triple Magnet CB Antenna Mount (3 x 5″ Mag Base)** is an **ultra-strong magnetic mount** designed for **large, high-power antennas and demanding mobile installations**. With **three powerful 5” magnets**, this mount delivers **exceptional grip and stability — even at speed**. --- ## 💪 Extreme Holding Power ✔ **3 x 5” high-strength magnets** ✔ Designed for large and heavy antennas ✔ Stays secure at high speeds ⚠️ *This mount is seriously strong — removing it takes effort!* --- ## 📡 Standard 3/8″ Antenna Fitting - **3/8″ stud mount** - Compatible with most CB and HF mobile antennas - Ideal for larger whip antennas --- ## 🔌 Low Loss Cable Included - **17ft (approx. 5.2m) RG-58A/U coax** - Pre-fitted **PL259 connector** - Ready to connect straight to your radio --- ## 🚗 Built for Demanding Installs - Perfect for trucks, 4x4s and high-power setups - Ideal when a single mag mount isn’t enough - Excellent stability in harsh conditions --- ## 🔧 Easy Setup - Supplied flat packed - **Basic assembly required** - Quick and straightforward to put together --- ## Key Features - Triple magnetic base (3 x 5″) - Ultra strong holding force - 3/8″ antenna stud fitting - 17ft RG58A/U coax cable - PL259 connector - Heavy-duty design --- ## Why Choose This Mount? ✔ Maximum stability for large antennas ✔ Stronger than standard mag mounts ✔ Ready-to-use cable included ✔ Ideal for serious CB setups --- ## Ideal For - Large CB antennas - High-power installations - Trucks and off-road vehicles - Users needing extra stability --- ## Straight Talking If a normal mag mount won’t cut it, this one **definitely will — just be ready to put some effort into removing it**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/triple-mag-mount-3-8-stud-aerial-fitting-cb-ham-radio-antenna-tri-magnet-base/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/triple-mag-mount-3-8-stud-aerial-fitting-cb-ham-radio-antenna-tri-magnet-base/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/triple-mag-mount-3-8-stud-aerial-fitting-cb-ham-radio-antenna-tri-magnet-base/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/triple-mag-mount-3-8-stud-aerial-fitting-cb-ham-radio-antenna-tri-magnet-base/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Triple%20mag%20mount%203%2F8%20stud%20aerial%20fitting&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftriple-mag-mount-3-8-stud-aerial-fitting-cb-ham-radio-antenna-tri-magnet-base%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/triple-mag-mount-3-8-stud-aerial-fitting-cb-ham-radio-antenna-tri-magnet-base/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/triple-mag-mount-3-8-stud-aerial-fitting-cb-ham-radio-antenna-tri-magnet-base/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/triple-mag-mount-3-8-stud-aerial-fitting-cb-ham-radio-antenna-tri-magnet-base/?share=telegram) - **Product categories:** Mag Mounts --- ### [Gutter Mount Heavy Duty Stainless Steel 3/8 CB aerial 4m Cable PL259](https://cbradio.co.uk/product/gutter-mount-heavy-duty-stainless-steel-3-8-cb-aerial-4m-cable-pl259/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙📡 Stainless Steel Gutter Mount Kit – 4m RG58 Cable – CB Radio Aerial Mount **Complete Kit • Stainless Steel • Off-Road Ready** This **stainless steel gutter mount kit** is built for **tough environments**, giving you a **strong, reliable mounting solution** for your CB aerial. 👉 Designed to handle serious off-road use --- 🔥 **Why Choose This Mount Kit** ✔ Stainless Steel Construction ✔ Built for Off-Road & Harsh Conditions ✔ 4 Metre Quality RG58 Cable Included ✔ Plug & Play Setup ✔ Strong, Reliable Mounting 👉 No weak brackets here --- 📦 **What’s Included** ✔ Stainless Steel Gutter Mount ✔ 4m RG58 Coax Cable ✔ PL259 Connector (Fitted) 👉 Ready to bolt on and go --- 🚙 **Perfect For** 4×4 & Off-Road Vehicles Vans & Campers Trucks Vehicles with Gutter Mounting Points --- 📡 **Performance Highlights** ✔ Low loss RG58 cable ✔ Solid grounding through mount ✔ Reliable signal performance 👉 Built for real-world conditions --- ⚙️ **Specifications** Mount Type: Gutter Mount Material: Stainless Steel Cable Length: 4 Metres Cable Type: RG58 Low Loss Connector: PL259 --- 💡 **Why This Kit Stands Out** ✔ Stainless steel – won’t rust ✔ Strong enough for off-road abuse ✔ Quality cable — not cheap imports ✔ Tried & tested in rugged terrain 👉 We stand 100% behind this product --- 🔧 **Installation** ✔ Bolt onto gutter ✔ Route cable into vehicle ✔ Connect to radio 👉 Simple, solid setup --- ⚠️ **Important Notes** ❗ Ensure good grounding for best performance ❗ Suitable for vehicles with gutter mounting points ❗ Check fitment before purchase --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: CB radios Aerials SWR meters Accessories --- 🔥 **Order Today** **Strong mount. Proper kit. Built to last.** 🚙📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/gutter-mount-heavy-duty-stainless-steel-3-8-cb-aerial-4m-cable-pl259/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/gutter-mount-heavy-duty-stainless-steel-3-8-cb-aerial-4m-cable-pl259/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/gutter-mount-heavy-duty-stainless-steel-3-8-cb-aerial-4m-cable-pl259/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/gutter-mount-heavy-duty-stainless-steel-3-8-cb-aerial-4m-cable-pl259/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Gutter%20Mount%20Heavy%20Duty%20Stainless%20Steel%203%2F8%20CB%20aerial%204m%20Cable%20PL259&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fgutter-mount-heavy-duty-stainless-steel-3-8-cb-aerial-4m-cable-pl259%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/gutter-mount-heavy-duty-stainless-steel-3-8-cb-aerial-4m-cable-pl259/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/gutter-mount-heavy-duty-stainless-steel-3-8-cb-aerial-4m-cable-pl259/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/gutter-mount-heavy-duty-stainless-steel-3-8-cb-aerial-4m-cable-pl259/?share=telegram) - **Product categories:** Gutter Mounts --- ### [Alinco DR135 / DX 10, 10/11m SSB CB Radio](https://cbradio.co.uk/product/cb-ham-side-band-radio-alinco-dr135-dx-10-11m-am-fm-ssb-cw/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Alinco DR135 DX / DX10 Radio** is a powerful, fully featured **10-metre multi-mode transceiver** designed for users who want **serious performance without the price tag of top-tier radios**. Based on an improved platform over the CRE 8900, this model delivers **clean receive, strong modulation and excellent frequency stability**, all housed in a compact all-black chassis. --- ## ⚠️ Important This is a **high-power amateur / export radio**. Use outside legal CB bands **requires the appropriate licence** and must comply with local regulations. --- ## 🔥 Multi-Mode High Power Performance ✔ AM / FM / USB / LSB / CW / PA ✔ Adjustable output power: - **1–12W AM/FM/CW** - **Up to 25W SSB** ✔ Ideal for **long-distance (DX) communication** --- ## 📡 Wide Frequency Coverage - **Standard:** 28.000 – 29.700 MHz (10m band) - **Extended (programmable):** 25.615 – 30.105 MHz - 6 bands × 60 channels ✔ Pre-programmed with **UK40 (export mode)** --- ## 🎛 Advanced Control & Features - RF Gain & RF Power adjustment - Clarifier (fine frequency tuning) - Dual Watch - Scan function - +10 kHz shift - Time Out Timer (TOT) - Keypad lock --- ## 🔊 Clean Audio & Signal Processing - **NB (Noise Blanker) + ANL filtering** - **Hi-Cut filter** - Built-in **Echo function** - Strong, clear modulation ✔ Excellent receive clarity even in noisy conditions --- ## ⚙️ Built for Performance - **Integrated SWR meter with alarm & protection** - Voltage protection - Stable frequency operation - High-quality internal shielding --- ## 🎨 Custom Display - Multi-colour display (7 colours) - “Rainbow mode” colour cycling - Clear S-meter readout --- ## 💻 Fully Programmable - PC programmable (optional cable required) - Custom frequency ranges & channels - Clarifier and repeater settings - CW tone adjustment ⚠️ *Use correct programming cable only* --- ## 🔌 Connectivity - SO-239 antenna connector - External speaker / PA output (3.5mm) - CW key input - Rear programming port --- ## Key Features - High power 10m transceiver - AM / FM / USB / LSB / CW - Adjustable output power - Wide programmable frequency range - SWR protection & meter - RF Gain & clarifier - Multi-colour display --- ## Technical Specifications - **Frequency Range:** 28.000 – 29.700 MHz (expandable) - **Power Supply:** 13.8V DC - **Dimensions:** approx. 173 x 238 x 51 mm - **Weight:** 1.5 kg - **Antenna Connector:** SO-239 --- ## What’s in the Box? - DR135 DX / DX10 radio - Microphone with channel controls - Mounting bracket & screws - Power cable - User manual --- ## Why Choose the DR135 DX? ✔ Strong performance at a sensible price ✔ More compact than larger base units ✔ Excellent receive and modulation quality ✔ Highly configurable platform --- ## Ideal For - Amateur radio operators - DX enthusiasts - Advanced CB / export users - Mobile or base setups --- ## Straight Talking If you want a **serious 10m radio without spending DX-5000 money**, this is a very strong performer. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-ham-side-band-radio-alinco-dr135-dx-10-11m-am-fm-ssb-cw/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-ham-side-band-radio-alinco-dr135-dx-10-11m-am-fm-ssb-cw/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-ham-side-band-radio-alinco-dr135-dx-10-11m-am-fm-ssb-cw/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-ham-side-band-radio-alinco-dr135-dx-10-11m-am-fm-ssb-cw/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Alinco%20DR135%20%2F%20DX%2010%2C%2010%2F11m%20SSB%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-ham-side-band-radio-alinco-dr135-dx-10-11m-am-fm-ssb-cw%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-ham-side-band-radio-alinco-dr135-dx-10-11m-am-fm-ssb-cw/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-ham-side-band-radio-alinco-dr135-dx-10-11m-am-fm-ssb-cw/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-ham-side-band-radio-alinco-dr135-dx-10-11m-am-fm-ssb-cw/?share=telegram) - **Product categories:** Alinco, HF Transceivers --- ### [3/8 stud Gutter mount for CB radio Antenna](https://cbradio.co.uk/product/3-8-stud-gutter-mount-for-cb-radio-antenna-land-rover-or-tractor-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3/8 Gutter Mount Kit with Cable** is a **heavy-duty mounting solution** designed for **gutter-mounted CB and ham radio antennas**. Made from **cast iron and tested in real off-road conditions**, this mount is built to **handle serious use without compromise**. --- ## 💪 Built for Tough Conditions ✔ Solid **cast iron construction** ✔ Handles vibration, impact and rough terrain ✔ Designed for off-road environments ✔ Built to last --- ## 🔩 Standard 3/8″ Stud Fitting - Fits most CB antennas - Compatible with springers and whips - No adapters required ✔ Universal fit --- ## 🚜 Ideal for Land Rover & Work Vehicles Perfect for: - Land Rover models - Tractors and agricultural vehicles - 4×4 off-road setups - Vans and work trucks ✔ Proven real-world use --- ## 🔌 Complete Cable Included ✔ **4 metre RG58 coax cable** ✔ **PL259 connector fitted** ✔ Ready to connect to your radio --- ## 🔧 Easy Installation - Clamp onto vehicle gutter - Secure mount - Connect cable to radio ✔ Simple and effective --- ## 📡 Reliable Signal Setup ✔ Good grounding through vehicle body ✔ Stable mounting improves antenna performance --- ## 🔁 Flexible Options ✔ Other cable lengths available in our shop ✔ Suitable for custom setups --- ## Key Features - Heavy duty gutter mount - Cast iron construction - 3/8″ antenna stud - 4m RG58 coax cable - PL259 connector fitted --- ## Why Choose This Mount? ✔ Stronger than standard mounts ✔ Built for off-road use ✔ Complete ready-to-install kit ✔ Trusted performance --- ## Ideal For - Off-road vehicles - Land Rover owners - Agricultural use - CB radio installations --- ## Straight Talking If your vehicle sees hard use, this is the kind of mount that **won’t let you down**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-8-stud-gutter-mount-for-cb-radio-antenna-land-rover-or-tractor-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-8-stud-gutter-mount-for-cb-radio-antenna-land-rover-or-tractor-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-8-stud-gutter-mount-for-cb-radio-antenna-land-rover-or-tractor-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-8-stud-gutter-mount-for-cb-radio-antenna-land-rover-or-tractor-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%2F8%20stud%20Gutter%20mount%20for%20CB%20radio%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-8-stud-gutter-mount-for-cb-radio-antenna-land-rover-or-tractor-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-8-stud-gutter-mount-for-cb-radio-antenna-land-rover-or-tractor-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-8-stud-gutter-mount-for-cb-radio-antenna-land-rover-or-tractor-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-8-stud-gutter-mount-for-cb-radio-antenna-land-rover-or-tractor-aerial/?share=telegram) - **Product categories:** Gutter Mounts --- ### [mag mount for CB aerial or HAM antenna 3/8](https://cbradio.co.uk/product/5-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **5″ Limpet Magnetic Antenna Mount** is a **seriously strong, low-profile mag mount** designed to keep your antenna **firmly in place — even at speed**. Built with a **powerful magnet (same strength as larger mounts)** but in a more compact design, this is one of the **toughest magnetic mounts you can get**. --- ## 💪 Extreme Holding Power ✔ Super strong **5″ “Limpet” magnet** ✔ Same magnetic strength as larger 7″ mounts ✔ Designed to stay put at high speeds ✔ If this won’t hold it… nothing will --- ## 🚗 Low Profile Design - More compact than larger mag mounts - Cleaner look on your vehicle - Less wind resistance --- ## 🔌 Ready to Install - **3/8″ thread fitting** for antenna - **RG58 coax cable fitted** - **PL259 connector included** ✔ Plug straight into your radio --- ## 🌧 Built for Outdoor Use - Waterproof rubber protection pad - Protects your vehicle paint - Seals internal components ✔ Durable and weather resistant --- ## 📡 Universal Compatibility Suitable for: - CB antennas - Ham radio antennas - Mobile aerial setups ✔ Works with most 3/8″ antennas --- ## 🔧 Easy Installation 1. Place on vehicle roof 2. Route cable inside 3. Connect to radio 4. Screw on antenna ✔ No drilling required --- ## Key Features - 5″ heavy-duty magnetic mount - 3/8″ antenna fitting - RG58 coax cable - PL259 connector - Waterproof rubber base - Low profile design --- ## Why Choose This Mount? ✔ Extremely strong magnetic hold ✔ Compact but powerful ✔ Ready-to-use setup ✔ Protects your vehicle --- ## Ideal For - Cars, vans and 4x4s - Truck drivers - Temporary installs - High-speed use --- ## Straight Talking You’ll **struggle to pull this off the roof** — and that’s exactly what you want. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/5-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/5-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/5-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/5-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mag%20mount%20for%20CB%20aerial%20or%20HAM%20antenna%203%2F8&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F5-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/5-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/5-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/5-magnetic-mag-mount-for-cb-aerial-or-ham-antenna-3-8-thread/?share=telegram) - **Product categories:** Mag Mounts --- ### [CB radio Aerial wingnut Body Mount](https://cbradio.co.uk/product/low-profile-cb-radio-aerial-body-mount-antenna-butterfly-knuckle-with-cable/) **Published:** February 23, 2023 **Author:** Jan **Content:** The **Compact Body Mount CB Antenna 70cm** is a high-quality, mid-size antenna designed for users who want **solid performance in a compact, manageable size**. Don’t let the size fool you — this is a **well-built antenna with performance comparable to leading European brands**. --- ## 🚗 Compact Yet Capable ✔ Length: **70cm** ✔ Ideal balance between size and performance ✔ Suitable for cars, vans and light commercial vehicles ✔ Discreet, practical installation --- ## 📡 Strong Performance - Covers **26 – 28 MHz CB band** - Low SWR: **< 1.2:1** - Handles up to **250W continuous power** - Reliable everyday communication --- ## 🛠 Built to Last - **Stainless steel whip** - Durable construction for long-term use - Designed to withstand daily driving conditions --- ## 🔌 Ready for Installation - Supplied with **4m RG58 coax cable** - Fitted with **PL259 connector** - Designed for **body mount installations** --- ## Key Features - Compact 70cm CB antenna - Body mount design - 4m RG58 cable included - PL259 connector fitted - Low SWR for efficient performance - Durable stainless steel construction --- ## Technical Specifications - **Frequency Range:** 26 – 28 MHz - **Length:** 70 cm - **Impedance:** 50 Ohms - **Maximum Power:** 250W (continuous) - **SWR:** < 1.2:1 - **Polarisation:** Vertical - **Cable:** 4m RG58 - **Connector:** PL259 --- ## Why Choose This Antenna? ✔ Compact and easy to install ✔ Better performance than very short antennas ✔ Strong build quality ✔ Great all-round option for everyday use --- ## Ideal For - Cars and vans - Fixed body mount installations - Everyday CB users - Drivers wanting a neat, tidy setup --- ## Straight Talking If you want **something bigger than a mini antenna but smaller than a full 1.5m whip**, this sits right in the sweet spot. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/low-profile-cb-radio-aerial-body-mount-antenna-butterfly-knuckle-with-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/low-profile-cb-radio-aerial-body-mount-antenna-butterfly-knuckle-with-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/low-profile-cb-radio-aerial-body-mount-antenna-butterfly-knuckle-with-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/low-profile-cb-radio-aerial-body-mount-antenna-butterfly-knuckle-with-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20radio%20Aerial%20wingnut%20Body%20Mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flow-profile-cb-radio-aerial-body-mount-antenna-butterfly-knuckle-with-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/low-profile-cb-radio-aerial-body-mount-antenna-butterfly-knuckle-with-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/low-profile-cb-radio-aerial-body-mount-antenna-butterfly-knuckle-with-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/low-profile-cb-radio-aerial-body-mount-antenna-butterfly-knuckle-with-cable/?share=telegram) - **Product categories:** PNI CB Antennas --- ### [PNI Escort HP 65 CB radio UK EU one hander](https://cbradio.co.uk/product/pni-escort-hp-65-cb-radio-uk-eu-one-hander/) **Published:** June 20, 2025 **Author:** Jan **Content:** The **PNI Escort HP 65 CB Radio** is one of the most compact CB radios on the market, with a smart design that puts **all controls directly on the microphone**. This means you can hide the main radio unit out of sight and keep full control in your hand — perfect for modern vehicles where dashboard space is limited. --- ## 🎤 Microphone-Controlled Operation Unlike traditional CB radios, the HP65 places: ✔ Channel selection ✔ Menu controls ✔ Function buttons ✔ Large LCD display …all on the microphone. This gives you **maximum flexibility in installation** and keeps everything easily accessible while driving. --- ## 🚗 Designed for Modern Vehicles - Ultra compact main unit (easy to hide) - Ideal for cars, vans and trucks with limited dash space - 1DIN compatible installation - Clean, minimal visible setup Perfect for discreet installs without compromising functionality. --- ## 🌍 Multi-Norm European Operation The HP65 supports **multiple frequency bands and country norms**, allowing you to: - Select the correct **frequency table** - Adjust to **local regulations when travelling** Ideal for international drivers and European use. --- ## Key Features - 4W Output Power (legal CB standard) - AM / FM operation - **Microphone with integrated LCD display & controls** - Dual Watch (monitor two channels) - Channel Scan - RF Gain (9 levels) - Manual Squelch (28 levels) - ASQ (5 levels automatic squelch) - Keypad Lock - Emergency Channel Function - Built-in SWR Meter - Multi-colour display (7 colours) - Customisable key tones & lighting --- ## Technical Specifications **General** - Channels: 40 - Frequency Range: 26.965 – 27.405 MHz - Modes: AM / FM - Power Output: 4W - Power Supply: 13.2V ±10% - Current Consumption: 2A - Dimensions: 120 x 110 x 27 mm - Weight: 617g **Performance** - Sensitivity: 0.25 µV @ 12dB SINAD - Audio Output: 3W - Distortion: < 8% @ 1kHz - Modulation: FM 2kHz / AM 80% **Microphone & Connections** - Microphone: RJ45 connector - External speaker socket - 2-pin Kenwood accessory connection --- ## What’s in the Box? - CB Radio Unit - Microphone with display & controls - Mounting bracket & screws - Microphone holder - Power cable - Cigarette lighter plug - User manual --- ## Why Choose the HP65? This radio solves a major problem with modern installs: 👉 No space for a traditional CB With the HP65 you get: - Clean installation - Full control from the mic - Modern look - Advanced features in a tiny footprint --- ## Ideal For - Modern cars with limited dashboard space - Vans and work vehicles - Truck drivers - Discreet CB installations - European travellers ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-escort-hp-65-cb-radio-uk-eu-one-hander/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-escort-hp-65-cb-radio-uk-eu-one-hander/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-escort-hp-65-cb-radio-uk-eu-one-hander/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-escort-hp-65-cb-radio-uk-eu-one-hander/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%2065%20CB%20radio%20UK%20EU%20one%20hander&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-escort-hp-65-cb-radio-uk-eu-one-hander%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-escort-hp-65-cb-radio-uk-eu-one-hander/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-escort-hp-65-cb-radio-uk-eu-one-hander/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-escort-hp-65-cb-radio-uk-eu-one-hander/?share=telegram) - **Product categories:** PNI --- ### [PL259 4 x UHF Coax Plugs 7mm for Mini8 coax pack of 4 plus 1 pl258 coupler](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7mm-for-mini8-coax-pack-of-4-plus-1-pl258-coupler/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **4x PL259 UHF Plugs for Mini 8 (RG8X) + 1x PL258 Coupler – 7mm Coax Connectors** **Solder Friendly • Reliable • Complete Connector Set** This **connector pack** includes **4 high-quality PL259 plugs (7mm for Mini 8 / RG8X)** plus **1 PL258 double female coupler**, ideal for **CB, amateur radio, and RF installations**. 👉 Everything you need for **terminating and joining coax cables**. --- ### 🔥 **Why Choose These Connectors** ✔ **Brown Inserts – Won’t Melt When Soldering** ✔ **Designed for Mini 8 / RG8X Coax (7mm)** ✔ **Includes PL258 Coupler for Joining Cables** ✔ **Strong, Reliable RF Connection** --- ### 📦 **What’s Included** ✔ **4 x PL259 UHF Plugs (7mm Mini 8 / RG8X)** ✔ **1 x PL258 Female to Female Coupler** 👉 Ideal for **cable builds and extensions**. --- ### 📡 **Perfect For** - CB radio installations - Amateur (Ham) radio setups - Making custom coax leads - Extending coax cables - SWR meter connections --- ### ⚙️ **Specifications** - Connector Type: **PL259 (UHF Male)** - Coupler Type: **PL258 (UHF Female to Female)** - Cable Size: **7mm (Mini 8 / RG8X)** - Quantity: **4 Plugs + 1 Coupler** --- ### 💡 **Why Brown Insert PL259s Matter** ✔ Heat resistant during soldering ✔ More durable than cheap white insert versions ✔ Ensures solid, long-lasting connection 👉 A **better quality connector for proper installs**. --- ### 🔧 **Installation** ✔ Strip coax cable ✔ Solder centre pin ✔ Screw body into place 👉 Suitable for DIY and professional use. --- ### ⚠️ **Important Notes** ❗ Designed for **7mm coax (Mini 8 / RG8X)** ❗ Requires soldering ❗ Ensure correct cable preparation --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable (RG58 / RG213 / Mini 8) - SO239 sockets - Adaptors & connectors - Radio accessories --- ### 🔥 **Order Today** **Connect it right. Build it properly. No cheap shortcuts.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7mm-for-mini8-coax-pack-of-4-plus-1-pl258-coupler/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7mm-for-mini8-coax-pack-of-4-plus-1-pl258-coupler/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7mm-for-mini8-coax-pack-of-4-plus-1-pl258-coupler/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7mm-for-mini8-coax-pack-of-4-plus-1-pl258-coupler/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PL259%204%20x%20UHF%20Coax%20Plugs%207mm%20for%20Mini8%20coax%20pack%20of%204%20plus%201%20pl258%20coupler&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-4-x-uhf-coax-plugs-7mm-for-mini8-coax-pack-of-4-plus-1-pl258-coupler%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7mm-for-mini8-coax-pack-of-4-plus-1-pl258-coupler/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7mm-for-mini8-coax-pack-of-4-plus-1-pl258-coupler/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7mm-for-mini8-coax-pack-of-4-plus-1-pl258-coupler/?share=telegram) - **Product categories:** PL259 Connectors --- ### [PNI Escort HP 9500 CB Radio 4W, AM-FM, 12V/24V](https://cbradio.co.uk/product/cb-radio-pni-escort-hp-9500-multistandard-asq-vox-scan-4w-am-fm-12v-24v/) **Published:** October 9, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=VnFfcLU0Wys[/embed] **Content:** The **PNI Escort HP 9500 CB Radio** is a **compact, feature-packed multi-standard CB radio** designed for **clear communication, easy installation and everyday reliability**. With a **front-facing speaker, 1 DIN mounting option and 12/24V compatibility**, it’s ideal for drivers who want a **clean install with strong audio performance**. --- ## 🚗 Compact Design with DIN Mount ✔ **1 DIN compatible** – fits standard dashboard slots ✔ Compact and robust build ✔ Ideal for cars, vans, 4x4s and trucks --- ## 🔊 Front Speaker for Clear Audio - Built-in **front-facing speaker** - Direct sound towards the driver - Ideal for enclosed dashboards --- ## 🌍 Multi-Standard European Operation - AM / FM CB radio - Works across key European bands (UK / EU / DE) - Easy band selection via front panel ✔ Perfect for cross-border communication --- ## 🎨 Large Multi-Colour Display - Bright backlit LCD screen - Multiple colour options - Easy-to-read channel and settings --- ## 🔊 Advanced Noise Control - **ASQ (5-level automatic squelch)** - Manual squelch adjustment - Clear, stable communication --- ## ⚙️ Practical Features - Channel scan - Keypad lock - Emergency channel access - Simple and intuitive controls --- ## 🔌 Connectivity & Convenience - **2-pin Kenwood socket (front)** – for hands-free accessories - External speaker connection - Supplied with **cigarette lighter power lead** - Works on **12V and 24V systems** --- ## Key Features - AM / FM CB radio - Multi-standard (UK / EU / DE) - 12V / 24V compatible - Front speaker - DIN mount included - Multi-colour display - ASQ + manual squelch - Compact design --- ## What’s in the Box? - PNI HP 9500 CB radio - Microphone - DIN mounting kit - Mounting bracket - Power cable with lighter plug - User manual --- ## Why Choose the HP 9500? ✔ Compact but feature-rich ✔ Clear front speaker audio ✔ Clean DIN installation ✔ Great for everyday and travel use --- ## Ideal For - Cars, vans and trucks - Drivers travelling across Europe - Clean dashboard installs - Everyday CB users --- ## Straight Talking If you want a **compact DIN CB radio with front speaker and solid features**, this is a very well-balanced choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-pni-escort-hp-9500-multistandard-asq-vox-scan-4w-am-fm-12v-24v/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-pni-escort-hp-9500-multistandard-asq-vox-scan-4w-am-fm-12v-24v/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-pni-escort-hp-9500-multistandard-asq-vox-scan-4w-am-fm-12v-24v/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-pni-escort-hp-9500-multistandard-asq-vox-scan-4w-am-fm-12v-24v/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%209500%20CB%20Radio%204W%2C%20AM-FM%2C%2012V%2F24V&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-pni-escort-hp-9500-multistandard-asq-vox-scan-4w-am-fm-12v-24v%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-pni-escort-hp-9500-multistandard-asq-vox-scan-4w-am-fm-12v-24v/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-pni-escort-hp-9500-multistandard-asq-vox-scan-4w-am-fm-12v-24v/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-pni-escort-hp-9500-multistandard-asq-vox-scan-4w-am-fm-12v-24v/?share=telegram) - **Product categories:** PNI --- ### [Meteor Modulator CB Radio antenna Bull-whip aerial](https://cbradio.co.uk/product/meteor-modulator-cb-radio-antenna-bull-whip-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚛 **Meteor Modulator Bullwhip CB Antenna 1.65m – 26–28MHz – 500W – 3/8 UNF** **Maximum Range • Heavy Duty Build • Serious Performance** The **Meteor Modulator Bullwhip CB antenna** is built for users who demand **strong signal performance and extended range**, thanks to its **large coil and full-length whip design**. 👉 Ideal for **truckers, 4×4 users, and serious CB setups**. --- ### ✅ **Why Choose the Meteor Bullwhip** ✔ **Extended Range Performance** – larger coil for better efficiency ✔ **Heavy Duty Construction** – built for tough conditions ✔ **Flexible Stainless Steel Whip** – absorbs knocks & vibration ✔ **Covers Full CB Band (26–28 MHz)** ✔ **Pre-Tuned – Ready to Install** --- ### 📡 **Performance Highlights** - Wide coverage across **26–28 MHz (AM/FM CB band)** - **Low SWR (~1.5:1)** for efficient transmission - Designed for **strong signal output and reliable communication** 👉 Perfect when **range matters most**. --- ### 🚜 **Perfect For** - Trucks / HGVs - 4×4 & off-road vehicles - Agricultural machinery - Pickup trucks - Long-distance CB communication --- ### ⚙️ **Specifications** - Model: **Meteor Modulator Bullwhip Antenna** - Type: **1/4 Wave Base Loaded Mobile Antenna** - Frequency: **26–28 MHz** - Length: **1.65 Metres** - Power Handling: **Up to 500 Watts** - Coil Length: **220 mm** - Coil Diameter: **22 mm** - Impedance: **50 Ohms** - SWR: **Approx. 1.5:1** - Fitting: **3/8” UNF Thread** - Whip Material: **17/7 PH Stainless Steel** --- ### 💡 **Why This Antenna Stands Out** Compared to smaller antennas: - Better signal reach - Improved efficiency - Stronger performance under load 👉 A great choice for **serious mobile setups**. --- ### ⚠️ **Important Notes** ❗ Requires suitable **3/8 mount** ❗ Best performance achieved with **good grounding and positioning** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Heavy duty mounts - Coax cable & connectors - SWR meters & tuning tools - CB radios & accessories --- ### 🔥 **Order Today** **Go further. Talk clearer. Built for performance.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/meteor-modulator-cb-radio-antenna-bull-whip-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/meteor-modulator-cb-radio-antenna-bull-whip-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/meteor-modulator-cb-radio-antenna-bull-whip-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/meteor-modulator-cb-radio-antenna-bull-whip-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Meteor%20Modulator%20CB%20Radio%20antenna%20Bull-whip%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmeteor-modulator-cb-radio-antenna-bull-whip-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/meteor-modulator-cb-radio-antenna-bull-whip-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/meteor-modulator-cb-radio-antenna-bull-whip-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/meteor-modulator-cb-radio-antenna-bull-whip-aerial/?share=telegram) - **Product categories:** Modulators --- ### [CB Radio mic Microphone 5 Pin DIN for Older Midland Maxcom Cobra Colt](https://cbradio.co.uk/product/cb-radio-mic-microphone-5-pin-din-for-older-midland-maxcom-cobra-colt/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **5 Pin DIN CB Radio Microphone** is a **brand new replacement mic**, designed for **older CB radios using a 5-pin DIN connection**. Perfect for bringing older radios **back to life quickly and easily**. --- ## 🎤 Direct Replacement Mic ✔ Plug-and-play solution ✔ Restores transmit function ✔ No modifications required --- ## 🔌 5 Pin DIN Connection ✔ Standard **5 pin DIN plug** ✔ Durable moulded plastic connector ✔ Secure and reliable fit --- ## 📻 Compatible With Popular Models Works with older radios including: - Cobra 21XFM - Colt 210 / 295 / 355 / 720 - Midland 104 / 104D / 099 / 100M - Maxcom 21E and others ✔ Always check your plug type before purchase --- ## 🔊 Clear Audio Performance ✔ Reliable voice transmission ✔ Good clarity for everyday use ✔ Ideal for mobile setups --- ## 📏 Flexible Cable ✔ Coiled lead for ease of use ✔ Extends when needed ✔ Keeps installation tidy --- ## 💪 Built to Last ✔ Strong microphone body ✔ Durable cable ✔ Reliable push-to-talk (PTT) switch --- ## 🔧 Ideal Replacement Perfect if: - Mic is faulty or missing - Cable is damaged - PTT button has stopped working --- ## 📦 What You Get ✔ 1 x 5 Pin DIN CB Radio Microphone --- ## Key Features - 5 pin DIN CB microphone - Wide compatibility - Plug-and-play - Durable construction - Reliable performance --- ## Why Choose This Mic? ✔ Simple fix for common faults ✔ Works with many older radios ✔ Easy to install ✔ Great value --- ## Ideal For - Vintage CB radio users - Truck and taxi radios - Replacement or spare mic - Keeping older radios running --- ## Straight Talking If your mic’s gone — your radio’s useless. This gets you back on air. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-mic-microphone-5-pin-din-for-older-midland-maxcom-cobra-colt/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-mic-microphone-5-pin-din-for-older-midland-maxcom-cobra-colt/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-mic-microphone-5-pin-din-for-older-midland-maxcom-cobra-colt/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-mic-microphone-5-pin-din-for-older-midland-maxcom-cobra-colt/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20mic%20Microphone%205%20Pin%20DIN%20for%20Older%20Midland%20Maxcom%20Cobra%20Colt&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-mic-microphone-5-pin-din-for-older-midland-maxcom-cobra-colt%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-mic-microphone-5-pin-din-for-older-midland-maxcom-cobra-colt/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-mic-microphone-5-pin-din-for-older-midland-maxcom-cobra-colt/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-mic-microphone-5-pin-din-for-older-midland-maxcom-cobra-colt/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [Midland 88 Universal Mounted Mobile CB radio](https://cbradio.co.uk/product/midland-88/) **Published:** September 19, 2021 **Author:** Jan **Content:** The **Midland M88 CB Radio** is a **next-generation ultra-slim CB radio** designed for **modern vehicles, clean installs and maximum usability**. With a **large TFT colour display, multiple mounting options and full multi-standard capability**, the M88 offers **flexibility, performance and a premium feel** in one compact unit. --- ## 🚗 Ultra Slim & Flexible Installation ✔ Only **77mm deep** – ideal for tight spaces ✔ Includes **3 mounting options**: - Standard bracket - DIN mount - Windscreen suction mount ✔ Install it exactly how you want --- ## 🌍 Multi-Standard European Operation - AM / FM operation - Multi-band support across Europe - Perfect for cross-border communication --- ## 🎨 Large TFT Colour Display - Bright **full-colour TFT screen** - Easy-to-read channel and settings - Modern interface for quick operation --- ## 🔊 Advanced Audio & Noise Filtering - **Digital squelch (multi-level)** - **Noise Blanker + HIC filters** - Clear communication even in noisy environments --- ## 🎤 Smart Microphone Control - **UP / DOWN / Priority channel buttons** - Fast channel changes - Easy control without reaching the unit --- ## ⚙️ Feature-Packed Performance - Dual Watch (monitor two channels) - 4 memory channels - Roger Beep - PA function - Emergency channels **9 / 19** --- ## 🔧 Built for Reliability - Durable **aluminium chassis** - Protection against antenna mismatch - Automatic power-on function --- ## Key Features - AM / FM multi-standard CB radio - Ultra slim design (77mm depth) - 12V / 24V compatible - TFT colour display - Multiple mounting options - Digital squelch & noise filters - Dual Watch & memory channels --- ## What’s in the Box? - Midland M88 CB radio - Microphone (6-pin) - Mounting bracket - DIN mounting kit - Windscreen suction mount - Power lead - User manual --- ## Why Choose the M88? ✔ Ultra-slim modern design ✔ Flexible mounting options ✔ Excellent display and usability ✔ Packed with useful features --- ## Ideal For - Modern cars and vans - Clean, discreet installs - Drivers wanting flexibility - Regular and advanced CB users --- ## Straight Talking If you want a **modern CB radio that looks as good as it performs**, the M88 is one of the best-designed options out there. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/midland-88/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/midland-88/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/midland-88/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/midland-88/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Midland%2088%20Universal%20Mounted%20Mobile%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmidland-88%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/midland-88/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/midland-88/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/midland-88/?share=telegram) - **Product categories:** Midland --- ### [4 X PL259 UHF Coax Plugs 6-mm for RG58 coax pack of 4 plus 1 pl258 coupler](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-6-mm-for-rg58-coax-pack-of-4-plus-1-pl258-coupler/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **4x PL259 Plugs 6mm + PL258 Coupler – UHF Connectors for RG58 Coax – Solder Type Kit** **Complete Connector Kit – Build, Repair & Extend Your Coax** This kit includes **4 high-quality PL259 (UHF) plugs** for **RG58 coax (6mm)** plus **1 x PL258 inline coupler**, giving you everything needed to **terminate cables and join coax leads**. 👉 Ideal for **CB and amateur radio installations, repairs, and extensions**. --- ### ✅ **What’s Included** ✔ **4 x PL259 UHF Plugs (6mm – RG58)** ✔ **1 x PL258 UHF Female Coupler (Joiner)** --- ### ✅ **Key Features** ✔ **6mm Entry – Perfect for RG58 Coax** ✔ **Brown Heat-Resistant Inserts** – won’t melt during soldering ✔ **Solder Type Connections** – maximum signal transfer ✔ **PL258 Coupler** – easily join two PL259 leads ✔ **Durable, Reliable Construction** --- ### ⚠️ **Avoid Cheap Alternatives** Low-quality connectors often use **white inserts** that: - Melt when soldering - Distort under heat - Cause weak or unreliable connections 👉 These feature **brown heat-resistant inserts** for **clean installation and long-term reliability**. --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Coax Cable Repairs - Cable Extensions & Joiners - DIY & Workshop Projects --- ### ⚙️ **Specifications** - Connector Type: **PL259 (UHF Male)** - Coupler Type: **PL258 (UHF Female to Female)** - Cable Compatibility: **RG58 (6mm)** - Connection Type: **Solder** - Quantity: **4 Plugs + 1 Coupler** --- ### 🛠 **Installation Notes** - Suitable for standard soldering methods - Designed for RG58 coax (solid or foam dielectric) - Provides strong mechanical and electrical connection --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable (RG58 / RG8X / RG213) - Antennas & mounts - Adaptors & connectors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Everything you need for a clean, reliable coax setup.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-6-mm-for-rg58-coax-pack-of-4-plus-1-pl258-coupler/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-6-mm-for-rg58-coax-pack-of-4-plus-1-pl258-coupler/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-6-mm-for-rg58-coax-pack-of-4-plus-1-pl258-coupler/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-6-mm-for-rg58-coax-pack-of-4-plus-1-pl258-coupler/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20X%20PL259%20UHF%20Coax%20Plugs%206-mm%20for%20RG58%20coax%20pack%20of%204%20plus%201%20pl258%20coupler&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-x-pl259-uhf-coax-plugs-6-mm-for-rg58-coax-pack-of-4-plus-1-pl258-coupler%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-6-mm-for-rg58-coax-pack-of-4-plus-1-pl258-coupler/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-6-mm-for-rg58-coax-pack-of-4-plus-1-pl258-coupler/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-6-mm-for-rg58-coax-pack-of-4-plus-1-pl258-coupler/?share=telegram) - **Product categories:** PL259 Connectors --- ### [ruger 10/22 custom recoil buffer authentic tuffer buffer](https://cbradio.co.uk/product/ruger-10-22-custom-recoil-buffer-authentic-tuffer-buffer/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🎯 **Tuffer Buffer Recoil Buffer for Ruger 10/22 – Bolt Stop Pin Upgrade – Shock Absorber** **Reduce Wear • Quieter Operation • Premium Quality** Upgrade your rifle with the **Tuffer Buffer recoil reducer**, designed to replace the factory **metal bolt stop pin** and dramatically **reduce wear, noise, and impact stress**. 👉 A simple upgrade that makes a **big difference in performance and longevity**. --- ### 🔥 **Why Choose Tuffer Buffer** ✔ **Eliminates Metal-to-Metal Impact** ✔ **Reduces Wear on Receiver & Bolt** ✔ **Quieter, Smoother Cycling** ✔ **Acts as a Shock Absorber** ✔ **Long-Lasting Premium Material** --- ### ✅ **Key Features** ✔ **Direct Replacement for Bolt Stop Pin** ✔ **High Quality Polyurethane Construction** ✔ **Resistant to Oil, Solvents & Abrasion** ✔ **High Impact & Load Bearing Strength** ✔ **Non-Corrosive & Durable** --- ### ⚙️ **Compatibility** ✔ Suitable for: - **.22 LR** - **.22 WMR** - **.17 HM2** 👉 Designed to fit directly into your **10/22 receiver**. --- ### 💡 **What It Does** Standard metal pin: - Causes impact wear - Creates loud “clanging” noise - Stresses receiver holes 👉 Tuffer Buffer: ✔ Absorbs impact ✔ Protects your rifle ✔ Improves shooting experience --- ### 🏆 **Premium Quality** ✔ Made from **high-grade virgin materials** ✔ Precision manufactured to **tight tolerances** ✔ Excellent resistance to: - Wear - Chemicals - Low temperatures 👉 Built to last — **likely the last buffer you’ll need**. --- ### 🌍 **Quality Assurance** ✔ **Genuine Tuffer Buffer** ✔ Manufactured in **North America** ❌ Not a cheap import copy --- ### 🔧 **Installation** ✔ Quick and easy replacement ✔ No modification required ✔ Drop-in fit --- ### ⚠️ **Important Notes** ❗ Ensure compatibility with your rifle before purchase ❗ This is a **replacement buffer only** --- ### 📦 **Fast Dispatch** ✔ Secure packaging ✔ Ready to install --- ### 🔥 **Order Today** **Protect your rifle. Smooth the action. Upgrade properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ruger-10-22-custom-recoil-buffer-authentic-tuffer-buffer/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ruger-10-22-custom-recoil-buffer-authentic-tuffer-buffer/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ruger-10-22-custom-recoil-buffer-authentic-tuffer-buffer/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ruger-10-22-custom-recoil-buffer-authentic-tuffer-buffer/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20ruger%2010%2F22%20custom%20recoil%20buffer%20authentic%20tuffer%20buffer&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fruger-10-22-custom-recoil-buffer-authentic-tuffer-buffer%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ruger-10-22-custom-recoil-buffer-authentic-tuffer-buffer/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ruger-10-22-custom-recoil-buffer-authentic-tuffer-buffer/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ruger-10-22-custom-recoil-buffer-authentic-tuffer-buffer/?share=telegram) - **Product categories:** Hunting Accessories --- ### [Uniden Bearcat UBC125XLT programmed scanner & High gain aerial Get ready 4 RIAT](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-programmed-scanner-high-gain-aerial-get-ready-4-riat/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Uniden UBC125XLT Scanner** kit is a **ready-to-use handheld scanner package**, pre-programmed and upgraded with a **MRW-100 high gain aerial** — ideal for events like Royal International Air Tattoo. Straight out of the box, you’re set up to **listen to live airband and radio communications**. --- ## ✈️ Pre-Programmed for RIAT & Airband ✔ **455 UK military aircraft frequencies pre-loaded** ✔ Covers civilian and military airband ✔ Perfect for airshows and aviation enthusiasts --- ## 📡 Wide Frequency Coverage - **25–88 MHz** - **108–174 MHz (Airband)** - **225–512 MHz** - **806–960 MHz** ✔ Covers a huge range of communications --- ## 📶 High Gain Aerial Upgrade ✔ Includes **MRW-100 high gain antenna** ✔ Improved reception vs standard aerial ✔ Better signal clarity and range --- ## 🎛 Advanced Scanner Features - **500 programmable channels (10 banks)** - **Alpha tagging (name your channels)** - **CTCSS / DCS squelch** - **Close Call RF capture** - **Priority scan + turbo search** ✔ Serious capability in a compact unit --- ## 🔍 Smart Signal Detection - Automatically detects nearby transmissions - Quickly locks onto active frequencies - Ideal for busy environments like airshows --- ## 🔌 Modern USB-C Charging - Powered by **2x AA rechargeable batteries (included)** - **USB-C charging cable included** - Charge via phone charger or in-car USB ⚠️ Wall adapter not included --- ## ⚠️ Important Notes - **No external speaker support** (headphones only) - **Police & emergency services cannot be received** --- ## 🎒 Complete Ready-to-Go Kit ✔ Scanner unit ✔ MRW-100 high gain antenna ✔ 2x rechargeable AA batteries ✔ USB-C charging cable ✔ Belt clip & hand strap ✔ Instruction manual --- ## Key Features - Pre-programmed scanner - High gain antenna included - 500 channels with alpha tagging - Wide frequency coverage - USB-C charging --- ## Why Choose This Package? ✔ Ready to use straight out the box ✔ Ideal for airshows like RIAT ✔ Improved reception with upgraded aerial ✔ Compact and easy to carry --- ## Ideal For - Airshow visitors - Aviation enthusiasts - Scanner hobbyists - Event monitoring --- ## Straight Talking Turn it on, tune in, and you’ll be **listening to live aircraft comms within minutes**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-programmed-scanner-high-gain-aerial-get-ready-4-riat/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-programmed-scanner-high-gain-aerial-get-ready-4-riat/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-programmed-scanner-high-gain-aerial-get-ready-4-riat/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-programmed-scanner-high-gain-aerial-get-ready-4-riat/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Uniden%20Bearcat%20UBC125XLT%20programmed%20scanner%20%26%20High%20gain%20aerial%20Get%20ready%204%20RIAT&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Funiden-bearcat-ubc125xlt-programmed-scanner-high-gain-aerial-get-ready-4-riat%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-programmed-scanner-high-gain-aerial-get-ready-4-riat/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-programmed-scanner-high-gain-aerial-get-ready-4-riat/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-programmed-scanner-high-gain-aerial-get-ready-4-riat/?share=telegram) - **Product categories:** Scanners and Aerials --- ### [mb400 3/8 sturdy boot mount for amateur or cb radio antenna 4m cable](https://cbradio.co.uk/product/mb400-3-8-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **MB-400 3/8 Boot Mount Kit** is a **high-quality heavy-duty antenna mount**, designed for **boot / hatch installations** on cars, vans and 4x4s. Supplied with **4m RG58 coax cable and PL259 plug**, this is a **complete, ready-to-install solution** for **3/8 threaded CB and amateur radio antennas**. --- ## 💪 Heavy Duty Construction ✔ Strong and durable build ✔ Designed for larger antennas ✔ Holds firm under vibration ✔ Built for real-world use --- ## 🔩 3/8″ Stud Antenna Fitting - Standard **3/8 thread** - Fits most CB antennas - Ideal for springers and trucker aerials ✔ No adapters required --- ## 🚗 Boot / Hatch Mount Design - Clamps onto boot or hatch edge - No drilling required - Clean, discreet installation ✔ Perfect for modern vehicles --- ## 🔌 Complete Cable Included ✔ **4 metre RG58 coax cable** ✔ **PL259 connector fitted** ✔ Ready to connect to your radio --- ## 📡 Suitable for Larger Antennas Works with antennas such as: - Sirio Performer 5000 ✔ Handles full-size trucker antennas --- ## 🔧 Easy Installation - Clamp to boot edge - Tighten securely - Route cable into vehicle ✔ Quick and simple setup --- ## 🌧 Built for Outdoor Use ✔ Weather resistant ✔ Reliable in all conditions ✔ Suitable for daily use --- ## Key Features - Heavy duty boot mount - 3/8″ antenna stud - 4m RG58 coax cable - PL259 connector fitted - No-drill installation --- ## Why Choose the MB-400? ✔ Stronger than basic mounts ✔ Complete ready-to-use kit ✔ Supports larger antennas ✔ Clean installation --- ## Ideal For - Cars and hatchbacks - Mobile CB setups - Amateur radio installs - Temporary or permanent installs --- ## Straight Talking If you want to run a **proper 3/8 antenna without drilling your car**, this is a solid option. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mb400-3-8-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mb400-3-8-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mb400-3-8-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mb400-3-8-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mb400%203%2F8%20sturdy%20boot%20mount%20for%20amateur%20or%20cb%20radio%20antenna%204m%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmb400-3-8-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mb400-3-8-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mb400-3-8-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mb400-3-8-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [SuperStar 3900 UK legal SSB CB radio](https://cbradio.co.uk/product/super-star-3900-programmable-40-multi-standard-channels/) **Published:** June 27, 2023 **Author:** Jan **Content:** The **Super Star 3900 CB Radio** is a true icon of CB — combining **classic styling with modern performance and multi-mode capability**. With **AM, FM and full SSB (USB/LSB)** operation, this radio delivers strong performance for both everyday use and long-distance communication, while retaining the unmistakable look that made it legendary. --- ## 🔥 AM / FM / SSB – Real Performance ✔ AM & FM for standard CB use ✔ **USB / LSB sideband** for extended range ✔ 4W AM/FM + **12W SSB output** A serious step up from basic radios. --- ## 🎛 Classic Design – Modern Upgrades - Iconic layout with **analogue meter** - Side-mounted microphone socket - Updated **backlit display with function indicators** - Adjustable screen illumination Classic feel with improved usability. --- ## 🚀 2023 Updated Model - New **UP/DOWN microphone** - Improved internal electronics (lighter, more efficient) - Enhanced display and controls - Maintains original Super Star character --- ## 📡 Multi-Standard Operation - Covers **26.565 – 27.99125 MHz** - Multi-standard European compatibility - Suitable for UK and EU use --- ## Advanced Features - Built-in **SWR / Power / RSSI meter** - RF Gain & Mic Gain adjustment - **ASQ + Manual Squelch** - VOX hands-free function - Programmable Roger Beep - NB / ANL noise filters - HI-CUT filter - Busy channel lockout - TOT (Time Out Timer) - TX & RX noise reduction - PC programmable --- ## Key Features - 80 channel multi-standard CB - AM / FM / USB / LSB modes - 4W AM/FM / 12W SSB output - Analogue meter display - Backlit LCD with function display - Front controls + side mic socket - High-performance classic design --- ## Technical Specifications - **Frequency Range:** 26.565 – 27.99125 MHz - **Modes:** AM / FM / USB / LSB - **Power Output:** 4W (AM/FM) / 12W (SSB) - **Frequency Control:** PLL Synthesizer - **Frequency Stability:** ±5 ppm - **Channel Spacing:** 10 kHz - **Power Supply:** 13.8V DC - **Current Consumption:** 5A - **Dimensions:** 287 x 200 x 61 mm - **Weight:** 1.5 kg - **Antenna Connector:** SO-239 --- ## What’s in the Box? - Super Star 3900 CB Radio - Microphone with UP/DOWN buttons - Mounting bracket & hardware - Microphone holder - Power lead - Spare fuse --- ## Why Choose the Super Star 3900? ✔ Legendary design and reputation ✔ SSB capability for extended range ✔ Packed with advanced features ✔ Strong, reliable performance --- ## Ideal For - Experienced CB users - Long-distance (DX) operators - Classic radio enthusiasts - Mobile or base station setups --- ## Straight Talking If you want a **proper CB radio with real presence, performance and heritage**, this is one of the most recognisable and capable options available. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/super-star-3900-programmable-40-multi-standard-channels/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/super-star-3900-programmable-40-multi-standard-channels/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/super-star-3900-programmable-40-multi-standard-channels/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/super-star-3900-programmable-40-multi-standard-channels/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SuperStar%203900%20UK%20legal%20SSB%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsuper-star-3900-programmable-40-multi-standard-channels%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/super-star-3900-programmable-40-multi-standard-channels/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/super-star-3900-programmable-40-multi-standard-channels/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/super-star-3900-programmable-40-multi-standard-channels/?share=telegram) - **Product categories:** Superstar --- ### [3/8 CB Antenna saver Aerial Shock Spring](https://cbradio.co.uk/product/heavy-duty-3-8-cb-antenna-saver-aerial-shock-spring/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3/8″ Heavy Duty Antenna Spring** is a **must-have upgrade** for protecting your antenna and mount from damage. Designed to **absorb shocks and impacts**, this spring helps prevent **snapped aerials and broken mounts**, especially when using rigid antennas. --- ## 💪 Protect Your Antenna & Mount ✔ Reduces stress on mounts and brackets ✔ Helps prevent snapping and damage ✔ Extends the life of your setup --- ## 🔧 Shock Absorbing Design - Heavy-duty coil spring - Absorbs movement, knocks and vibration - Ideal for rough conditions ✔ Built for real-world use --- ## 📡 Ideal for Rigid Antennas Perfect for: - Firestik-style antennas - Fibreglass whips - Non-flexible aerials ✔ Adds essential flexibility --- ## 🚛 Built for Tough Environments - Ideal for trucks, 4x4s and off-road use - Handles branches, low obstacles and bumps - Great for agricultural and work vehicles --- ## 🔌 Standard 3/8″ Fitting - Fits most CB and ham antenna mounts - Compatible with standard 3/8″ threaded systems ✔ Easy to install --- ## ⚙️ Simple Installation 1. Screw onto mount 2. Attach antenna to top 3. Tighten securely ✔ Instant upgrade --- ## Key Features - Heavy duty antenna spring - 3/8″ threaded fitting - Shock absorbing design - Protects antenna and mount - Easy installation --- ## Why Choose This Spring? ✔ Prevents costly damage ✔ Adds flexibility to rigid antennas ✔ Ideal for off-road and daily use ✔ Strong and durable --- ## Ideal For - Truck drivers - 4×4 and off-road vehicles - Farmers and work vehicles - Anyone using rigid aerials --- ## Straight Talking If your antenna doesn’t flex, this is what **stops it snapping**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/heavy-duty-3-8-cb-antenna-saver-aerial-shock-spring/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/heavy-duty-3-8-cb-antenna-saver-aerial-shock-spring/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/heavy-duty-3-8-cb-antenna-saver-aerial-shock-spring/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/heavy-duty-3-8-cb-antenna-saver-aerial-shock-spring/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%2F8%20CB%20Antenna%20saver%20Aerial%20Shock%20Spring&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fheavy-duty-3-8-cb-antenna-saver-aerial-shock-spring%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/heavy-duty-3-8-cb-antenna-saver-aerial-shock-spring/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/heavy-duty-3-8-cb-antenna-saver-aerial-shock-spring/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/heavy-duty-3-8-cb-antenna-saver-aerial-shock-spring/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [LWHF-80 80 - 6m Multi-band Long Wire Amateur Antenna HAM Aerial copper flexweave](https://cbradio.co.uk/product/lwhf-80-80-6m-multi-band-long-wire-amateur-antenna-ham-aerial-copper-flexweave/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🌐 **LWHF-80 End Fed Long Wire Antenna – 80m–6m HF – 20m Wire – 9:1 UNUN – 400W** **Multi-Band • Compact Footprint • Big Performance** The **LWHF-80 Long Wire Antenna** is a **high-performance end-fed HF antenna**, designed to cover **80m through to 6m bands** with excellent results—even where space is limited. 👉 A **serious antenna solution** for HF operators. --- ### 🔥 **Why Choose the LWHF-80** ✔ **Covers 80m–6m Bands (Including WARC)** ✔ **Built-In 9:1 UNUN – Direct Coax Feed** ✔ **Handles Up To 400W RF Power** ✔ **Compact Installation – Ideal for Limited Space** ✔ **Made in Great Britain** --- ### 📡 **Performance Highlights** - Frequency Range: **3.5 – 52 MHz** - Multi-band operation via ATU - Excellent performance for its size 👉 Delivers **strong HF coverage from a simple wire setup**. --- ### ⚙️ **Key Features** ✔ **End-Fed Long Wire Design** ✔ **9:1 UNUN at Feed Point** ✔ **SO239 Connector (Standard UHF)** ✔ **DC Path to Earth – Reduces Static Noise** ✔ **Non-Kink Flexweave Copper Wire** ✔ **Fully Assembled – Ready to Install** --- ### 📏 **Specifications** - Type: **End Fed Wire Antenna** - Length: **20.28 Metres** - Bands: **80m – 6m (incl. WARC)** - Frequency: **3.5 – 52 MHz** - Power Handling: **Up to 400W RF** - Impedance: **50 Ohms (via 9:1 UNUN)** - Connector: **SO239** - Construction: **Poly Weave Copper Flexwire** --- ### 💡 **Why Use a 9:1 UNUN** ✔ Matches high impedance wire to 50Ω coax ✔ Reduces noise ✔ Provides DC grounding path 👉 Makes installation **simple and effective**. --- ### 🔧 **Installation Options** ✔ Sloper ✔ Inverted L ✔ Horizontal wire ✔ Portable setups 👉 Flexible for **home or field use**. --- ### ⚠️ **Important Notes** ❗ Requires an **ATU (Antenna Tuning Unit)** for multi-band use ❗ Internal tuners may not cover all bands 👉 External ATU recommended for full coverage --- ### 🏕 **Perfect For** - Amateur radio operators - Portable HF setups (SOTA / field days) - Limited space installations - Base station use --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - External ATU units - Coax cable & connectors - Mast poles & guy kits - RF accessories --- ### 🔥 **Order Today** **Simple setup. Massive coverage. Real performance.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/lwhf-80-80-6m-multi-band-long-wire-amateur-antenna-ham-aerial-copper-flexweave/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/lwhf-80-80-6m-multi-band-long-wire-amateur-antenna-ham-aerial-copper-flexweave/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/lwhf-80-80-6m-multi-band-long-wire-amateur-antenna-ham-aerial-copper-flexweave/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/lwhf-80-80-6m-multi-band-long-wire-amateur-antenna-ham-aerial-copper-flexweave/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20LWHF-80%2080%20-%206m%20Multi-band%20Long%20Wire%20Amateur%20Antenna%20HAM%20Aerial%20copper%20flexweave&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flwhf-80-80-6m-multi-band-long-wire-amateur-antenna-ham-aerial-copper-flexweave%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/lwhf-80-80-6m-multi-band-long-wire-amateur-antenna-ham-aerial-copper-flexweave/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/lwhf-80-80-6m-multi-band-long-wire-amateur-antenna-ham-aerial-copper-flexweave/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/lwhf-80-80-6m-multi-band-long-wire-amateur-antenna-ham-aerial-copper-flexweave/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [PNI Escort HP40 Multi-Standard CB Radio](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/) **Published:** June 9, 2026 **Author:** Jan **Content:** ## 📻📡 PNI HP40 Multi-Standard CB Radio – AM/FM – UK & European Bands – 12V / 24V **Feature Packed • Multi Standard • Modern Design** The **PNI HP40** is a modern **multi-standard CB radio** designed for drivers who travel across the UK and Europe and need a radio packed with advanced features. 👉 Simply select the country standard and you’re ready to go. --- 🔥 **Why Choose The PNI HP40** ✔ Multi-Standard European CB Radio ✔ AM & FM Operation ✔ 12V & 24V Compatible ✔ USB-C Connectivity ✔ Packed with Advanced Features 👉 One of the most feature-rich CB radios available. --- 📦 **What’s Included** ✔ PNI HP40 CB Radio ✔ 6 Pin Microphone ✔ Mounting Bracket ✔ Power Lead ✔ User Manual 👉 Ready to install and operate. --- 📡 **Key Features** ✔ 40 Channel Multi-Norm CB Radio ✔ AM/FM Switching ✔ Automatic Channel Scan ✔ Dual Watch Channel Monitoring ✔ Adjustable ASQ ✔ Manual Squelch ✔ RF Gain (7 Levels) ✔ VOX Hands-Free Operation ✔ Channel Memory ✔ Talkback Function ✔ Roger Beep ✔ Emergency Channel Function ✔ Key Lock Function ✔ PA Function 👉 Designed for both beginners and experienced CB users. --- 🔊 **Advanced Noise Reduction** ✔ ANL (Automatic Noise Limiter) ✔ NB (Noise Blanker) ✔ HI-CUT Filter ✔ NRC Noise Reduction (5 Levels) 👉 Cleaner reception and less interference. --- 🎨 **Display & Controls** ✔ Multi-Colour Display (7 Colours) ✔ Adjustable Dimmer (3 Levels) ✔ Illuminated Keys ✔ Signal Strength Display ✔ Channel & Function Indicators 👉 Easy to read day or night. --- ⚙️ **Technical Specifications** Frequency Range: 26.965 – 27.405 MHz Channels: 40 Modes: AM / FM Power Output: 4 Watts Microphone: 6 Pin Speaker Output: 3 Watts Power Supply: 13.8V / 27.6V DC Audio Distortion: Less than 5% @ 1KHz --- 💡 **Why This Radio Stands Out** ✔ Works across multiple European standards ✔ Huge feature list normally found on premium radios ✔ Modern display and controls ✔ Suitable for cars, vans, trucks and 4x4s ✔ USB-C equipped for modern convenience 👉 A lot of radio for the money. --- 🚙 **Perfect For** Cars 4×4 Vehicles Trucks Vans European Travel 👉 Ideal for users who regularly cross borders. --- 🔧 **Installation** ✔ Connect power supply ✔ Fit aerial ✔ Select country standard ✔ Ready to operate 👉 Simple setup with advanced capabilities. --- ⚠️ **Important Notes** ❗ Ensure aerial is tuned before transmitting ❗ 4 Watt output complies with legal CB limits ❗ Compatible with both 12V and 24V vehicles --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure Packaging ✔ Ready to Install --- 💬 **Complete Your Setup** 👉 Check our shop for: CB Aerials SWR Meters Extension Speakers Mounting Kits Power Accessories --- 🔥 **Order Today** **Modern features. European coverage. Built for serious CB users.** 📻🚛📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP40%20Multi-Standard%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-escort-hp40-multi-standard-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-escort-hp40-multi-standard-cb-radio/?share=telegram) - **Product categories:** PNI --- ### [Heavy Duty Tractor CB Aerial Mount and MINI springer CB radio antenna](https://cbradio.co.uk/product/heavy-duty-tractor-cb-aerial-mount-and-mini-springer-cb-radio-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚜📡 **Heavy Duty Tractor CB Aerial Kit – Mini Springer Antenna + Mirror Mount – 27MHz 3/8** **Built for Farm Work • Tough • Ready to Fit** This **complete CB aerial kit** includes a **heavy duty right angle mirror mount** and a **Black Mini Springer antenna**, designed specifically for **tractors, agricultural machinery, and working vehicles**. 👉 A **strong, reliable setup** for harsh environments. --- ### 💪 **Why This Kit Stands Out** ✔ **Virtually Indestructible Springer Design** ✔ **Heavy Duty Mirror / Rail Mount Included** ✔ **Flexible Stainless Steel Whip** ✔ **Pre-Tuned – Ready to Install** ✔ **Built for Real Working Conditions** --- ### 📡 **Mini Springer Performance** - Covers full **27–28 MHz CB band** - **Low VSWR (≤ 1.5:1)** - **High power handling (up to 1000W)** - Strong, consistent signal 👉 Trusted by **farmers, truckers, and off-road users**. --- ### 🚜 **Perfect For** - Tractors & agricultural machinery - 4×4 & off-road vehicles - Farm pickups & utility vehicles - Forestry & site vehicles --- ### 🔧 **Complete Kit Includes** ✔ **Black Mini Springer CB Antenna** ✔ **Heavy Duty Right Angle Mirror Mount** ✔ **Ready for installation** --- ### ⚙️ **Antenna Specifications** - Type: **Base Loaded Springer Antenna** - Frequency: **27–28 MHz** - Length: **0.89 Metres** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8 Male Thread** - Pre-Tuned: **Yes** --- ### 🔩 **Mount Features** ✔ Right angle mirror / rail mount ✔ Strong clamp for bars & frames ✔ Ideal for **tractor cab mounting** ✔ Designed for **easy installation** --- ### 💡 **Why Springers Are Popular** ✔ Flexible – won’t snap under stress ✔ Durable coil construction ✔ Handles rough terrain & branches ✔ Long lifespan 👉 A proven **workhorse antenna design**. --- ### ⚠️ **Important Notes** ❗ Requires compatible CB radio & coax connection ❗ Ensure good grounding for best performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - Coax cable & connectors - SWR meters & tuning tools - Alternative mounts & antennas --- ### 🔥 **Order Today** **Tough kit. Strong signal. Built for the job.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/heavy-duty-tractor-cb-aerial-mount-and-mini-springer-cb-radio-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/heavy-duty-tractor-cb-aerial-mount-and-mini-springer-cb-radio-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/heavy-duty-tractor-cb-aerial-mount-and-mini-springer-cb-radio-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/heavy-duty-tractor-cb-aerial-mount-and-mini-springer-cb-radio-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Heavy%20Duty%20Tractor%20CB%20Aerial%20Mount%20and%20MINI%20springer%20CB%20radio%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fheavy-duty-tractor-cb-aerial-mount-and-mini-springer-cb-radio-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/heavy-duty-tractor-cb-aerial-mount-and-mini-springer-cb-radio-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/heavy-duty-tractor-cb-aerial-mount-and-mini-springer-cb-radio-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/heavy-duty-tractor-cb-aerial-mount-and-mini-springer-cb-radio-antenna/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [Long Springer aerial Tornado Stinger CB radio antenna and 5" mag mount 1.55m](https://cbradio.co.uk/product/long-springer-aerial-tornado-stinger-cb-radio-antenna-and-5-mag-mount-1-55m/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🧲📡 **XL Springer CB Antenna Kit – 1.55m + 5″ Turbo Mag Mount – Heavy Duty Aerial 27MHz** **Complete Kit • Massive Grip • Built for the Road** This **XL Springer CB aerial kit** comes complete with a **large 5″ Turbo magnetic mount, moulded lead, and PL259 connector**, giving you a **strong, no-drill installation with serious holding power**. 👉 A **proven setup** for **truckers, 4×4 users, and off-roaders**. --- ### 🔥 **Why Choose This Kit** ✔ **Complete Plug & Play Setup** ✔ **Large 5″ Turbo Mag Mount – Strong Hold** ✔ **Heavy Duty Springer Antenna** ✔ **Pre-Tuned – No Adjustment Needed** ✔ **Quality British Made Antenna** --- ### 📦 **What’s Included** ✔ **XL Springer CB Aerial (1.55m)** ✔ **5″ Turbo Magnetic Mount** ✔ **Moulded RG58 Coax Cable** ✔ **PL259 Connector (Fitted)** ✔ **Protective Rubber Base Pad** 👉 Everything needed for a **quick, clean install**. --- ### 📡 **Performance Highlights** - Full **27–28 MHz CB coverage (80 channels)** - **Low VSWR ≤ 1.5:1** - **High power handling up to 1000W** 👉 Strong, reliable signal for everyday use. --- ### 🚛 **Perfect For** - Trucks & HGVs - 4×4 & off-road vehicles - Vans & pickups - Agricultural machinery - Temporary or removable installs --- ### ⚙️ **Specifications** - Type: **1/4 Wave Base Loaded Springer Antenna** - Frequency: **27–28 MHz** - Length: **1.55 Metres** - Coil Length: **150 mm** - Coil Diameter: **50 mm** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 1000 Watts** - Impedance: **50 Ohms** - Fitting: **3/8 UNF Thread** - Whip: **17/7 PH Stainless Steel** --- ### 💡 **Why This Setup Works** ✔ Large mag mount = **excellent grip & grounding** ✔ Flexible springer = **handles impacts & rough use** ✔ No drilling required 👉 A **powerful and practical solution**. --- ### 🔧 **Installation** ✔ Place magnet on clean metal surface ✔ Route cable inside vehicle ✔ Connect to radio 👉 Ready to go in minutes. --- ### ⚠️ **Important Notes** ❗ Ensure surface is clean for best magnetic grip ❗ Height clearance should be considered (1.55m) ❗ Strong magnet – handle with care --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Options Available** 👉 Check our shop for: - Different colours - Fixed mounts & brackets - SWR meters & tuning tools - CB radios --- ### 🔥 **Order Today** **Strong hold. Strong signal. Built for the job.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/long-springer-aerial-tornado-stinger-cb-radio-antenna-and-5-mag-mount-1-55m/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/long-springer-aerial-tornado-stinger-cb-radio-antenna-and-5-mag-mount-1-55m/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/long-springer-aerial-tornado-stinger-cb-radio-antenna-and-5-mag-mount-1-55m/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/long-springer-aerial-tornado-stinger-cb-radio-antenna-and-5-mag-mount-1-55m/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Long%20Springer%20aerial%20Tornado%20Stinger%20CB%20radio%20antenna%20and%205%22%20mag%20mount%201.55m&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flong-springer-aerial-tornado-stinger-cb-radio-antenna-and-5-mag-mount-1-55m%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/long-springer-aerial-tornado-stinger-cb-radio-antenna-and-5-mag-mount-1-55m/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/long-springer-aerial-tornado-stinger-cb-radio-antenna-and-5-mag-mount-1-55m/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/long-springer-aerial-tornado-stinger-cb-radio-antenna-and-5-mag-mount-1-55m/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [4x 4mm stainless steel antenna Grub Screw for Springer CB or Ham Radio aerial](https://cbradio.co.uk/product/4x-4mm-stainless-steel-antenna-grub-screw-for-spinger-cb-or-ham-radio-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **M4 Stainless Steel Antenna Grub Screws (Pack of 4)** are **high-quality replacement set screws**, commonly used on **CB and amateur radio antennas**, especially **springer aerials**. Ideal as **spares or replacements**, these are a must-have for keeping your antenna secure. --- ## 🔩 Standard M4 Fitment ✔ **4mm (M4) grub screws** ✔ Fits most CB and ham radio antennas ✔ Common size for springer aerials --- ## 💪 A2 Stainless Steel ✔ Corrosion resistant ✔ Strong and durable ✔ Suitable for outdoor use ✔ Won’t rust or seize --- ## 🔧 Essential Replacement Part Perfect for: - Lost or worn grub screws - Maintenance and servicing - Spare kit for emergencies ✔ Keep your aerial secure --- ## 📦 Pack of 4 ✔ **4 x grub screws included** ✔ Handy to keep as spares ✔ Great value --- ## ⚙️ Wide Compatibility Used on: - CB antennas - Ham radio aerials - Springer and coil antennas --- ## 🛠 Easy to Fit - Screw into antenna base or coil - Tighten with correct tool - Secure your whip in place ✔ Quick and simple --- ## Key Features - M4 (4mm) grub screws - A2 stainless steel - Pack of 4 - Corrosion resistant - Suitable for CB & ham antennas --- ## Why Choose These? ✔ Reliable and durable ✔ Standard size for most antennas ✔ Ideal spare or replacement ✔ Built for outdoor use --- ## Ideal For - CB radio users - Amateur radio operators - Off-road setups - Antenna maintenance --- ## Straight Talking It’s a tiny part — but without it, your aerial isn’t going anywhere (or staying on!). ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4x-4mm-stainless-steel-antenna-grub-screw-for-spinger-cb-or-ham-radio-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4x-4mm-stainless-steel-antenna-grub-screw-for-spinger-cb-or-ham-radio-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4x-4mm-stainless-steel-antenna-grub-screw-for-spinger-cb-or-ham-radio-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4x-4mm-stainless-steel-antenna-grub-screw-for-spinger-cb-or-ham-radio-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204x%204mm%20stainless%20steel%20antenna%20Grub%20Screw%20for%20Springer%20CB%20or%20Ham%20Radio%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4x-4mm-stainless-steel-antenna-grub-screw-for-spinger-cb-or-ham-radio-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4x-4mm-stainless-steel-antenna-grub-screw-for-spinger-cb-or-ham-radio-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4x-4mm-stainless-steel-antenna-grub-screw-for-spinger-cb-or-ham-radio-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4x-4mm-stainless-steel-antenna-grub-screw-for-spinger-cb-or-ham-radio-aerial/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [In dash mount bracket Metal single DIN for Midland, TTi, Danita Intek CB radio](https://cbradio.co.uk/product/in-dash-mount-bracket-metal-single-din-for-midland-tti-danita-intek-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **CB Radio DIN Mount Cage** is a **professional all-metal in-dash mounting solution**, allowing you to install your CB radio neatly into a **standard DIN slot** for a **clean, factory-style finish**. --- ## 🚗 Clean In-Dash Installation ✔ Fits standard car stereo DIN slots ✔ Hides wiring and brackets ✔ Gives a **factory fitted look** --- ## 💪 Heavy Duty Metal Construction - Strong all-metal casing - Durable and long-lasting - Far superior to plastic alternatives ✔ Built properly --- ## 📏 Compatible Models Fits: - TTi TCB-770 / TTi TCB-771 - TTi TCB-660 - Midland 78 - Danita 3000 Multi - Intek M-790 / Intek M-795 / Intek M-799 --- ## 📐 Slot Dimensions - **140mm x 37.5mm** - Designed specifically for compatible CB radios --- ## ⚠️ Important Notes - **This listing is for the DIN mount only** - **CB radio NOT included** - Internal speaker may be covered when installed ➡️ External speaker recommended --- ## 🔧 Easy Installation - Slide into DIN slot - Secure mount - Insert radio ✔ Simple and effective --- ## 🎯 Professional Finish ✔ No hanging brackets ✔ No messy installs ✔ Clean dashboard appearance --- ## Key Features - DIN in-dash CB radio mount - Heavy-duty metal construction - Fits multiple CB radio models - Clean professional install - Standard DIN compatibility --- ## Why Choose This Mount? ✔ Proper in-dash installation ✔ Strong and durable build ✔ Improves interior look ✔ Designed for specific radios --- ## Ideal For - Clean dashboard builds - Professional installs - Cars and vans - CB users wanting factory look --- ## Straight Talking If you want your CB to look like it **belongs in the dash**, this is the way to do it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/in-dash-mount-bracket-metal-single-din-for-midland-tti-danita-intek-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/in-dash-mount-bracket-metal-single-din-for-midland-tti-danita-intek-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/in-dash-mount-bracket-metal-single-din-for-midland-tti-danita-intek-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/in-dash-mount-bracket-metal-single-din-for-midland-tti-danita-intek-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20In%20dash%20mount%20bracket%20Metal%20single%20DIN%20for%20Midland%2C%20TTi%2C%20Danita%20Intek%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fin-dash-mount-bracket-metal-single-din-for-midland-tti-danita-intek-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/in-dash-mount-bracket-metal-single-din-for-midland-tti-danita-intek-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/in-dash-mount-bracket-metal-single-din-for-midland-tti-danita-intek-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/in-dash-mount-bracket-metal-single-din-for-midland-tti-danita-intek-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [Alinco DR-735E 145/433 MHz NEW Dual Band amateur radio Transceiver with DTMF Mic](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/) **Published:** May 24, 2026 **Author:** Jan **Content:** # 📡 Alinco DR-735E Dual Band VHF/UHF Mobile – 50W – Full Duplex – Remote Head The **Alinco DR-735E** is a high-performance dual band mobile transceiver offering true independent VHF/UHF operation, full duplex capability and remote head mounting. Designed for serious amateur operators who want flexibility, performance and customisation in a compact mobile unit. --- ## 🔥 Key Features ✔ 50W / 20W / 5W selectable output ✔ Full Duplex operation ✔ Extended Receive: 108–174MHz / 400–479MHz ✔ 1,000 Memory Channels ✔ Large Full Colour LCD Display ✔ Remote / Detachable Front Panel ✔ Internal Duplexer (Single Antenna Socket) ✔ Computer Programmable (Free Software) ✔ Easy Repeater Access --- ## 🎨 Customisable Full Colour Display The DR-735E features 8 full colour LEDs and: • 10 preset display colours • 6 custom memory colour settings • Separate TX / RX / Standby colour selection • Dual animated multi-colour display modes Assign colours to different memory banks or VFOs for instant visual identification. --- ## 📶 True Dual Band Operation • Independent left & right VFO controls • Separate volume & squelch knobs • V/V, U/U and V/U capability • Full duplex simultaneous TX/RX Feels like operating two separate radios in one chassis. --- ## 🔁 Repeater & Cross-Band Features ✔ Manual shift & programmable offset ✔ Auto repeater settings ✔ 4 tone-burst options ✔ Cross-band repeat (T model only – check regulations) Designed for simple and flexible repeater access. --- ## 🧠 Advanced Memory & Scan Functions • 1,000 programmable memory channels • 10 memory banks • 100 right-only / 100 left-only • 100 dual memories • 5 pairs programmed scan channels • Priority, VFO & memory scanning • Skip & Favourite scan options All memory channels store tones, output power, display colour and more. --- ## 📡 Receiver Capabilities • Aviation monitoring • Utility frequencies • CTCSS / DCS • 10dB RX attenuator • Sub-band mute • Image rejection • Auto power-off Extended receive coverage makes it extremely versatile. --- ## ⚙ Transmitter Specifications Output Power: High 50W / Mid 20W / Low 5W Modulation: FM / Narrow FM Frequency Stability: ±2.5ppm Spurious Emissions: < -60dB --- ## 📊 Technical Specifications TX (E Version): 144.000 – 145.995 MHz 430.000 – 439.995 MHz RX: 108.000 – 173.995 MHz 400.000 – 479.995 MHz Power Supply: 13.8V DC ±15% Current Drain: 12A TX High Dimensions: 140 x 60 x 188mm Weight: Approx. 1.3kg --- ## 📦 Ideal For ✔ Mobile Amateur Installations ✔ Cross-band Operation ✔ Repeater Work ✔ Dual Monitoring ✔ Advanced VHF/UHF Operators --- ## Why Choose the DR-735E? • True independent dual band operation • Large customisable display • Remote head flexibility • Extended receive coverage • Professional-grade performance ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Alinco%20DR-735E%20145%2F433%20MHz%20NEW%20Dual%20Band%20amateur%20radio%20Transceiver%20with%20DTMF%20Mic&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Falinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/alinco-dr-735e-145-433-mhz-new-dual-band-amateur-radio-transceiver-with-dtmf-mic/?share=telegram) - **Product categories:** VHF UHF Transceivers --- ### [Anytone AT-779UV Dual Band mini mobile radio Pre Programmed](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/) **Published:** May 24, 2026 **Author:** Jan **Content:** # 📡 Anytone AT-779UV Dual Band Mobile Radio – 25W – Pre-Programmed UK Repeaters – USB Lead Included Compact, rugged and powerful, the **Anytone AT-779UV** is a 2m / 70cm dual band mobile radio delivering up to **25 watts output**, ideal for mobile or base use. This unit comes **factory pre-programmed with the Moonraker code plug**, including: ✔ UK Repeaters ✔ 2m Simplex ✔ 70cm Simplex ✔ PMR446 (TX Disabled) ✔ Marine Band (TX Disabled) Ready to go straight out of the box. --- ## 🔊 Power Settings Selectable output levels: • 5 Watts • 10 Watts (Default – ideal for Foundation licence) • 25 Watts Flexible for different licence levels and operating conditions. --- ## 🎨 1.44” Colour TFT Display Bright, easy-to-read colour screen showing: • Frequency / Channel • Signal strength • Power level • Active functions Clear visibility in mobile installations. --- ## ⚙ Advanced Features ✔ CTCSS / DCS ✔ DTMF ✔ 2-Tone & 5-Tone Signalling ✔ Channel-specific settings ✔ Scrambler (selectable code) ✔ Compander function for improved weak signal audio Designed for serious amateur radio operators. --- ## 📦 What’s Included • Pre-Programmed Anytone AT-779UV Radio • Handheld Microphone • Mounting Bracket & Screws • Power Cable with Cigar Lighter Plug • USB Programming Lead • User Guide Everything required for installation and programming. --- ## 🚗 Ideal For ✔ Amateur Radio Mobile Installations ✔ Foundation Licence Operators ✔ 2m & 70cm Repeater Access ✔ Portable / Field Use ✔ Discreet Vehicle Installs --- ### Why Choose the AT-779UV? • Compact but powerful • Pre-loaded with UK repeater channels • Multiple signalling options • Excellent audio clarity • Great value dual-band solution ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20AT-779UV%20Dual%20Band%20mini%20mobile%20radio%20Pre%20Programmed&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-at-779uv-dual-band-mini-mobile-radio-pre-programmed/?share=telegram) - **Product categories:** VHF UHF Transceivers --- ### [Anytone AT 5555 N Ham 10 or CB 11 meter AM FM SSB Radio](https://cbradio.co.uk/product/anytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📻 **Anytone AT5555N Multi-Mode Radio – AM/FM/SSB – 10m / 11m – High Power Mobile/Base** **Powerful • Feature Packed • Premium Build** The **Anytone AT5555N** is a **high-performance multi-mode transceiver** designed for **10m amateur use**, with the flexibility to expand for **11m freeband (where permitted)**. 👉 A **top-tier radio** for serious operators who want **power, clarity, and control**. --- ### ⚠️ **IMPORTANT NOTICE** ❗ Supplied as **10m Amateur Radio (legal configuration)** ❗ 11m modification available **on request at checkout** ❗ **Use outside legal bands is NOT permitted in the UK** --- ### 🔥 **Why Choose the AT5555N** ✔ **Multi-Mode Operation (AM/FM/USB/LSB)** ✔ **High Output Power** ✔ **Large Clear LCD Display** ✔ **Fully Programmable** ✔ **Premium Build Quality & Design** --- ### 📡 **Performance Highlights** - Frequency Range: **25.000 – 29.700 MHz** - Power Output: - **AM: 12W** - **FM: 30W** - **SSB: 30W** *(adjustable)* 👉 Strong performance across **10m and beyond**. --- ### 🎛 **Key Features** ✔ **Big LCD Display with Signal Indicators** ✔ **SWR Protection & Meter** ✔ **RF Gain Control** ✔ **Automatic Squelch (ASQ)** ✔ **Clarifier (SSB Fine Tuning)** ✔ **Dual Watch Function** ✔ **Scan Function** ✔ **Time-Out Timer (TOT)** ✔ **Noise Filters (NB / HI-CUT)** ✔ **Echo Function** ✔ **Emergency Channel Access** ✔ **+10 kHz Shift** ✔ **Keypad Lock** --- ### 📊 **Advanced Functions** ✔ **CTCSS / DCS Encoder & Decoder** ✔ **Programmable via Software** ✔ **Offset Function** ✔ **Customisable Settings** --- ### 🎤 **Microphone & Controls** ✔ **Front Panel Mic Socket** ✔ **UP/DOWN Channel Selection** ✔ **Clear TX/RX Indicators** --- ### ⚙️ **Specifications** - Modes: **AM / FM / USB / LSB** - Memories: **6 Channels** - Size: **200 x 280 x 60 mm** - Weight: **2.7 kg** --- ### 🚗 **Perfect For** - Mobile installations (cars, vans, trucks) - Base station setups - Amateur radio operators - Enthusiasts wanting high performance --- ### 💡 **Why This Radio Stands Out** ✔ Powerful output ✔ Wide frequency capability ✔ Fully customisable ✔ Trusted Anytone platform 👉 A **serious upgrade over standard CB radios**. --- ### ⚠️ **Important Notes** ❗ Programming cable/software optional ❗ External antenna required (50Ω) ❗ Ensure correct setup before high power use --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Antennas & mounts - Power supplies - SWR meters - Coax cable & connectors --- ### 🔥 **Order Today** **Power. Precision. Performance. Built for serious radio users.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20AT%205555%20N%20Ham%2010%20or%20CB%2011%20meter%20AM%20FM%20SSB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-at-5555-n-crt-ss-7900-ham-10-or-cb-11-meter-am-fm-ssb-radio/?share=telegram) - **Product categories:** Anytone, HF Transceivers --- ### [CRT SS-7900 Ham 10m or CB 11 meter AM FM SSB Radio](https://cbradio.co.uk/product/ss-7900-ham-10m-or-cb-11-meter-am-fm-ssb-radio-crt-ss7900/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=Hnwe0HOfCng[/embed] **Content:** ## 📡📻 **SS-7900 Multi-Mode 10m Radio – AM/FM/SSB – High Power – Large Display – Programmable** **High Power • Feature Packed • Serious Radio** The **SS-7900** is a **powerful multi-mode 10 metre transceiver** with a **large, easy-to-read display**, advanced features, and full programmability. 👉 Designed for **serious users who want performance and control**. --- ### ⚠️ **IMPORTANT NOTICE** ❗ Due to CRT’s high shipping costs post-Brexit, we no longer supply CRT branded versions 👉 See our **Anytone equivalent (same platform, includes programming cable)** ❗ Supplied as **10m Amateur Radio (28–29.7 MHz) as standard** ❗ 11m (CB/freeband) modification available on request ❗ **Use outside legal bands is NOT permitted in the UK** --- ### 🔥 **Why Choose the SS-7900** ✔ **Multi-Mode (AM/FM/USB/LSB)** ✔ **High Output Power** ✔ **Massive LCD Display** ✔ **Fully Programmable** ✔ **Packed with Advanced Features** --- ### 📡 **Performance Highlights** - Frequency: **28.000 – 29.700 MHz (Standard)** - Power Output: - **AM: 12W** - **FM: 30W** - **SSB: 30W** *(adjustable)* 👉 Built for **strong signal performance**. --- ### 🎛 **Key Features** ✔ **Large LCD Display** ✔ **SWR Protection & Meter** ✔ **RF Gain Control** ✔ **Automatic Squelch (ASQ)** ✔ **Clarifier (SSB Fine Tuning)** ✔ **Dual Watch Function** ✔ **Scan Function** ✔ **Time-Out Timer (TOT)** ✔ **Noise Filters (NB / HI-CUT)** ✔ **Echo Function** ✔ **Emergency Channel Access** ✔ **+10 kHz Shift** ✔ **Keypad Lock** --- ### 📊 **Advanced Functions** ✔ **CTCSS / DCS Encoder & Decoder** ✔ **Programmable via Software** ✔ **Offset Function** ✔ **Selectable Display Modes (Freq/Channel/SWR/Power)** --- ### 🎤 **Microphone & Controls** ✔ **Front Panel Mic Socket** ✔ **UP/DOWN Channel Selection** ✔ **Clear Signal & TX/RX Indicators** --- ### ⚙️ **Specifications** - Modes: **AM / FM / USB / LSB** - Frequency Range: **28 – 29.7 MHz** - Memories: **6 Channels** - Size: **200 x 280 x 60 mm** - Weight: **1.5 kg** --- ### 💡 **Why This Radio Stands Out** ✔ Large display for easy viewing ✔ Strong output power ✔ Full customisation options ✔ Reliable platform used worldwide 👉 A **top choice for experienced operators**. --- ### ⚠️ **Important Notes** ❗ Programming cable/software optional ❗ External antenna required (50Ω) ❗ Ensure correct setup before high power use --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Antennas & mounts - Power supplies - SWR meters - Coax cable & connectors --- ### 🔥 **Order Today** **Power. Features. Control. Built for serious radio users.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ss-7900-ham-10m-or-cb-11-meter-am-fm-ssb-radio-crt-ss7900/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ss-7900-ham-10m-or-cb-11-meter-am-fm-ssb-radio-crt-ss7900/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ss-7900-ham-10m-or-cb-11-meter-am-fm-ssb-radio-crt-ss7900/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ss-7900-ham-10m-or-cb-11-meter-am-fm-ssb-radio-crt-ss7900/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CRT%20SS-7900%20Ham%2010m%20or%20CB%2011%20meter%20AM%20FM%20SSB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fss-7900-ham-10m-or-cb-11-meter-am-fm-ssb-radio-crt-ss7900%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ss-7900-ham-10m-or-cb-11-meter-am-fm-ssb-radio-crt-ss7900/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ss-7900-ham-10m-or-cb-11-meter-am-fm-ssb-radio-crt-ss7900/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ss-7900-ham-10m-or-cb-11-meter-am-fm-ssb-radio-crt-ss7900/?share=telegram) - **Product categories:** CRT, HF Transceivers --- ### [CRT SS6900NV Latest version 10m Multi-mode AM FM SSB Superstar SS 6900 v7](https://cbradio.co.uk/product/crt-ss6900n-latest-version-10m-multi-mode-am-fm-ssb-superstar-ss-6900-n/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📻 **SS6900N V7 10m Multi-Mode Radio – AM/FM/SSB/CW – Blue Display – Programmable** **High Power • Multi-Mode • Feature Packed** The **SS6900N V7** is a **powerful 10 metre band multimode transceiver**, offering **advanced features, high output power, and full programmability**. 👉 Latest version with **improved firmware and blue LED display**. --- ### ⚠️ **IMPORTANT NOTICE** ❗ Due to high shipping costs post-Brexit, we no longer supply CRT branded versions 👉 This is the **same radio platform used across multiple brands we now sell this as the Anytone AT5555 plus N** ❗ Supplied as a **standard 10m radio only (28–29.7 MHz)** ❗ Export mode modification instructions included ❗ **Export mode use is NOT permitted in the UK** --- ### 🔥 **Why Choose the SS6900N V7** ✔ **Multi-Mode Operation (AM/FM/SSB/CW/PA)** ✔ **High Output Power** ✔ **Fully PC Programmable** ✔ **Large Blue LCD Display** ✔ **Advanced Features & Customisation** --- ### 📡 **Performance Highlights** - Frequency: **28.000 – 29.700 MHz (Standard 10m band)** - Export Range: **25.615 – 28.305 MHz** *(programmable)* - Output Power: - **AM: 12W** - **FM: 40W** - **SSB: 30W** 👉 Designed for **serious radio users**. --- ### 🎛 **Standard Features** ✔ Blue 7-digit frequency display ✔ Blue LCD channel display & backlight ✔ S-Meter ✔ Automatic Squelch ✔ Dual Watch ✔ Emergency Channel ✔ Roger Beep ✔ RF Gain ✔ Built-in SWR Meter ✔ Noise Blanker & ANL ✔ +10 KHz Shift ✔ Voltage & SWR Protection ✔ Adjustable Echo (delay & repeat) ✔ Power Level Adjustment (AM/FM) ✔ Multifunction Clarifier --- ### ⚙️ **Programmable Features** ✔ Frequency step control (10Hz–10KHz) ✔ Time-Out Timer (TOT) ✔ Squelch level adjustment ✔ Roger beep & CW tone settings ✔ Display configuration (TX freq, SWR, power etc.) ✔ Voltage protection levels --- ### 🔓 **Export Mode Features** *(where permitted)* ✔ HI-CUT ✔ Scan functions ✔ Keyboard lock ✔ Display options ✔ Extended menu access --- ### 🔌 **Installation & Power** ✔ Requires **13.8V DC power supply** ✔ Standard **4-pin microphone (UP/DOWN)** ✔ External antenna required (50Ω) --- ### 💡 **Why This Radio Stands Out** ✔ High power output for strong signal ✔ Full multimode capability ✔ Deep customisation options ✔ Proven platform used by multiple brands 👉 A **serious upgrade for experienced operators**. --- ### ⚠️ **Important Notes** ❗ **Use outside legal frequency limits is not permitted in the UK** ❗ Programming cable/software may be required for advanced setup ❗ Ensure proper antenna tuning before use --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Power supplies - Antennas & mounts - Coax cable & connectors - SWR meters --- ### 🔥 **Order Today** **Power. Features. Control. No compromise.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/crt-ss6900n-latest-version-10m-multi-mode-am-fm-ssb-superstar-ss-6900-n/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/crt-ss6900n-latest-version-10m-multi-mode-am-fm-ssb-superstar-ss-6900-n/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/crt-ss6900n-latest-version-10m-multi-mode-am-fm-ssb-superstar-ss-6900-n/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/crt-ss6900n-latest-version-10m-multi-mode-am-fm-ssb-superstar-ss-6900-n/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CRT%20SS6900NV%20Latest%20version%2010m%20Multi-mode%20AM%20FM%20SSB%20Superstar%20SS%206900%20v7&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcrt-ss6900n-latest-version-10m-multi-mode-am-fm-ssb-superstar-ss-6900-n%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/crt-ss6900n-latest-version-10m-multi-mode-am-fm-ssb-superstar-ss-6900-n/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/crt-ss6900n-latest-version-10m-multi-mode-am-fm-ssb-superstar-ss-6900-n/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/crt-ss6900n-latest-version-10m-multi-mode-am-fm-ssb-superstar-ss-6900-n/?share=telegram) - **Product categories:** CB Radios, HF Transceivers --- ### [Anytone AT-D878UV plus DMR hand held Bluetooth UK stock and warranty](https://cbradio.co.uk/product/anytone-at-d878uv-plus-dmr-hand-held-bluetooth-uk-stock-and-warranty/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Anytone AT-D878UV Plus** is one of the **most advanced DMR handheld radios available**, combining **digital and analogue operation, Bluetooth, GPS and roaming** in one powerful unit. Built for **serious users**, this radio is ideal for **amateur radio, commercial use and emergency communication**. --- ## 📡 Dual Band VHF/UHF Coverage ✔ **140–174 MHz (VHF)** ✔ **400–480 MHz (UHF)** ✔ Monitor **two bands simultaneously (V+V / U+U / V+U)** --- ## 🔊 Digital DMR + Analogue - Full **DMR Tier I & II support** - Works with DMR repeaters (2-slot TDMA) - Also supports standard analogue FM ✔ One radio for everything --- ## 📶 Massive Capacity - **4,000 memory channels** - **10,000 talk groups** - **150,000 digital contacts** ✔ Ready for worldwide use --- ## 📍 GPS & APRS Built In ✔ **DMR APRS + Analogue APRS** ✔ Real-time location tracking ✔ Built-in GPS functionality --- ## 🔁 Advanced Roaming Feature - Automatic repeater roaming - Seamless switching between networks - Ideal for mobile users --- ## 🎧 Bluetooth Connectivity ✔ Connect Bluetooth accessories ✔ Hands-free operation ✔ Modern wireless flexibility --- ## ⚡ High Power Output - Selectable: **6W / 4W / 2.5W / 1W** - Adapt to your environment --- ## 🔋 Long Battery Life ✔ **3100mAh Li-ion battery** ✔ Up to **35+ hours (power save mode)** --- ## 🎨 Colour TFT Display - **1.77″ colour screen** - Customisable colours and layout - Clear day/night visibility --- ## 🎛 Advanced Features - Dual timeslot monitoring - Auto digital/analogue detect - 2-tone & 5-tone paging - DTMF encoding - Zone selection from keypad - Programmable function keys --- ## 💻 Programming Included ✔ **USB programming cable included** ✔ Free software available ✔ Fully customisable setup ⚠️ **Programming required for full use** --- ## 🔌 Accessories & Connectivity - Kenwood-style 2-pin accessory socket - Compatible with speaker mics, headsets, etc. --- ## Key Features - Dual band VHF/UHF handheld - DMR + analogue modes - Bluetooth + GPS - 4000 channels - Roaming capability --- ## Technical Specifications - **Frequency:** 140–174 / 400–480 MHz - **Power Output:** 1–6W selectable - **Channels:** 4000 - **Display:** 1.77” colour TFT - **Battery:** 3100mAh Li-ion --- ## Why Choose the AT-D878UV Plus? ✔ One of the most capable handhelds on the market ✔ Combines digital, analogue, GPS & Bluetooth ✔ Ideal for both hobby and professional use ✔ Future-proof with large memory and upgrades --- ## Ideal For - Amateur radio operators - DMR network users - Emergency services & volunteers - Security and event communications --- ## Straight Talking This isn’t a basic handheld — it’s a **serious bit of kit that does almost everything**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-at-d878uv-plus-dmr-hand-held-bluetooth-uk-stock-and-warranty/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-at-d878uv-plus-dmr-hand-held-bluetooth-uk-stock-and-warranty/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-at-d878uv-plus-dmr-hand-held-bluetooth-uk-stock-and-warranty/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-at-d878uv-plus-dmr-hand-held-bluetooth-uk-stock-and-warranty/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20AT-D878UV%20plus%20DMR%20hand%20held%20Bluetooth%20UK%20stock%20and%20warranty&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-at-d878uv-plus-dmr-hand-held-bluetooth-uk-stock-and-warranty%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-at-d878uv-plus-dmr-hand-held-bluetooth-uk-stock-and-warranty/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-at-d878uv-plus-dmr-hand-held-bluetooth-uk-stock-and-warranty/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-at-d878uv-plus-dmr-hand-held-bluetooth-uk-stock-and-warranty/?share=telegram) - **Product categories:** VHF UHF Transceivers --- ### [Anytone AT778UV Dual band Radio VHF/UHF](https://cbradio.co.uk/product/anytone-at778-uv-cb-radio-vhf-uhf-micron-dual-band-2m-70cm/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Anytone AT-778UV** (also sold as CRT Micron UV) is a **compact, high-performance dual-band mobile radio** covering the **2m and 70cm amateur bands**. With a **large colour TFT display, powerful output, and advanced features**, it offers **serious capability in a small package**. --- ## 📡 Dual Band Amateur Coverage ✔ **2m (144–146 MHz)** ✔ **70cm (430–440 MHz)** ✔ Ideal for UK amateur radio use --- ## ⚡ Powerful Output Options - **5W / 15W / 25W selectable** - Adapt power to your environment - Strong transmission when needed --- ## 🎨 Large Colour TFT Display - Bright, easy-to-read screen - Adjustable viewing angle (up to 180°) - Displays frequency, signal, power and functions ✔ Modern, user-friendly interface --- ## 🎤 Smart Microphone with Built-In Speaker - Speaker integrated in mic - Programmable keys for quick access - Ideal for compact installs ✔ Perfect for tight spaces --- ## 🔧 Advanced Radio Features - **CTCSS / DCS (52 / 1024 codes)** - **DTMF encoder** - **Dual Watch** - **Scan & CTCSS/DCS scan** - **Talk Around function** - **Reverse frequency function** ✔ Everything you’d expect from a serious radio --- ## 📶 Flexible Channel Setup - **200 memory channels** - Multiple step sizes - Customisable band options (UU / UV / VU / VV) --- ## 🔊 Expandable Audio - External speaker jack - Clear audio even in noisy environments --- ## 💻 Software Programmable - Fully programmable via optional cable - Customise channels, tones and settings - Adapt to your exact needs --- ## ⚠️ Frequency Expansion Note - Standard: **144–146 / 430–440 MHz (UK amateur bands)** - Expandable to **136–174 / 400–490 MHz** (where permitted by local regulations) --- ## Key Features - Dual band VHF/UHF mobile radio - 2m / 70cm coverage - Up to 25W output - Colour TFT display - Compact design - Advanced signalling and scanning --- ## Technical Specifications - **Frequency:** 144–146 / 430–440 MHz - **Power Output:** 5W / 15W / 25W - **Voltage:** 13.8V DC - **Channels:** 200 memory - **Size:** 122 x 165 x 35 mm - **Weight:** 480g --- ## Why Choose the AT-778UV? ✔ Compact but powerful ✔ Feature-rich for the price ✔ Easy to install in modern vehicles ✔ Great for both beginners and experienced users --- ## Ideal For - Amateur radio operators - Mobile installations - Cars, vans and 4x4s - Users needing compact radios --- ## Straight Talking This is one of those radios that **does far more than its size suggests**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-at778-uv-cb-radio-vhf-uhf-micron-dual-band-2m-70cm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-at778-uv-cb-radio-vhf-uhf-micron-dual-band-2m-70cm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-at778-uv-cb-radio-vhf-uhf-micron-dual-band-2m-70cm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-at778-uv-cb-radio-vhf-uhf-micron-dual-band-2m-70cm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20AT778UV%20Dual%20band%20Radio%20VHF%2FUHF&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-at778-uv-cb-radio-vhf-uhf-micron-dual-band-2m-70cm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-at778-uv-cb-radio-vhf-uhf-micron-dual-band-2m-70cm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-at778-uv-cb-radio-vhf-uhf-micron-dual-band-2m-70cm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-at778-uv-cb-radio-vhf-uhf-micron-dual-band-2m-70cm/?share=telegram) - **Product categories:** VHF UHF Transceivers --- ### [Anytone AT-5555+ N 11m uk40 AM FM SSB](https://cbradio.co.uk/product/anytone-at-5555-n-software-v7-01-pre-programmed-11m-multimode-am-fm-ssb-6900/) **Published:** January 25, 2023 **Author:** Jan **Content:** The **Anytone AT-5555 PLUS Radio** is one of the most advanced 10-metre mobile transceivers available — combining **high power output, modern DSP-style features and full programmability**. With a completely redesigned PCB and **built-in NRC (Noise Reduction Circuit)**, this latest version delivers **cleaner receive audio, greater flexibility and serious performance**. --- ## ⚠️ Important This is a **high-power amateur / export radio**. Use on certain frequencies **requires the appropriate licence** and must comply with local regulations. --- ## 🔥 High Power Multi-Mode Performance ✔ AM / FM / USB / LSB / CW / PA ✔ Up to: - **40W FM / SSB** - **12W AM / CW** ✔ Designed for **long-distance (DX) communication** --- ## 🧠 Advanced Noise Reduction (NRC) - Built-in **RX Noise Reduction (NRC)** (dedicated PCB) - **RX Compander & Noise Gate** - NB / ANL + HI-CUT filtering ✔ Significantly cleaner receive audio in noisy conditions --- ## 🎛 Full Control & Customisation - RF Power & RF Gain control - Clarifier (fine frequency adjustment) - Dual Watch & Scan - Programmable Roger Beep - +10kHz quick shift - TOT (Time Out Timer) - Multiple squelch options (SQ / ASQ) --- ## 💻 Fully Programmable Platform - PC programmable (**software v7.01 required**) - Adjustable frequency ranges, steps & limits - Mic gain control & settings - Custom channel programming - Firmware-based feature control *(Programming cable included)* --- ## 📡 Wide Frequency Coverage - **Standard:** 28.000 – 29.700 MHz (10m band) - Expanded/export capability (programmable) - 6 bands × 60 channels per band --- ## 🎨 Large Display & Interface - Backlit **7-digit frequency display** - Digital S/RF meter - Channel indicator display - Clear, easy-to-read layout --- ## Key Features - High power 10m transceiver - AM / FM / USB / LSB / CW modes - NRC noise reduction system - Fully programmable via PC - RF power & gain control - Clarifier & scan functions - SWR & voltage protection --- ## Technical Specifications - **Frequency Range:** 28.000 – 29.700 MHz - **Modes:** AM / FM / USB / LSB / CW / PA - **Power Output:** - 12W AM / CW - 40W FM / SSB - **Power Supply:** 13.8V DC - **Current:** Up to 9A - **Dimensions:** 280 x 250 x 60 mm - **Weight:** 2.8 kg - **Antenna Connector:** SO-239 --- ## Pre-Configured Bands - Band F set to **UK 40 channels** - Multi-band programmable system - Fully adjustable via software --- ## What’s in the Box? - AT-5555 PLUS radio - Microphone (4-pin with UP/DOWN) - Mounting hardware - Power lead --- ## Why Choose the AT-5555 PLUS? ✔ High power for serious range ✔ Advanced noise reduction (NRC) ✔ Fully customisable platform ✔ One of the most feature-rich radios available --- ## Ideal For - Amateur radio operators - DX enthusiasts - Advanced users - Base or high-performance mobile setups --- ## Straight Talking This isn’t a beginner radio — it’s for those who want **power, control and serious performance**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-at-5555-n-software-v7-01-pre-programmed-11m-multimode-am-fm-ssb-6900/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-at-5555-n-software-v7-01-pre-programmed-11m-multimode-am-fm-ssb-6900/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-at-5555-n-software-v7-01-pre-programmed-11m-multimode-am-fm-ssb-6900/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-at-5555-n-software-v7-01-pre-programmed-11m-multimode-am-fm-ssb-6900/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20AT-5555%2B%20N%2011m%20uk40%20AM%20FM%20SSB&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-at-5555-n-software-v7-01-pre-programmed-11m-multimode-am-fm-ssb-6900%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-at-5555-n-software-v7-01-pre-programmed-11m-multimode-am-fm-ssb-6900/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-at-5555-n-software-v7-01-pre-programmed-11m-multimode-am-fm-ssb-6900/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-at-5555-n-software-v7-01-pre-programmed-11m-multimode-am-fm-ssb-6900/?share=telegram) - **Product categories:** Anytone, HF Transceivers --- ### [AnyTone ARES 2 AM/FM/SSB CB Radio 40w](https://cbradio.co.uk/product/anytone-ares-ii-am-fm-ssb-radio-classic-appearance-27mhz-cb-radio-high-power/) **Published:** April 29, 2023 **Author:** Jan **Content:** The **AnyTone ARES II Radio** is a high-performance multi-mode transceiver built for users who want **serious power, flexibility and full control**. Designed using the latest technology, the ARES II delivers **AM, FM and SSB (USB/LSB)** operation with advanced features normally found in much higher-end radios. --- ## ⚠️ Important This is a **high-power amateur/10m transceiver**. Use on certain frequencies **requires the appropriate licence** and must comply with local regulations. --- ## 🔥 High Power Multi-Mode Performance ✔ AM / FM / SSB (USB/LSB) ✔ High power output (H/L selectable) ✔ Designed for strong long-distance communication ✔ Stable PLL frequency control Ideal for DX work and advanced setups. --- ## 🎛 Advanced Control & Features - RF Gain adjustment - Microphone Gain control - Echo function - Offset function - +10 kHz function - Programmable Roger Beep - Busy channel lock - Monitor function Full control over your signal and audio. --- ## 🔊 Clean Audio & Noise Reduction - NB / ANL noise filters - HI-CUT filter - ASQ + Manual Squelch - SWR protection - Voltage protection Built for clear, stable communication. --- ## 📡 Flexible & Programmable - **PC programmable** - Multiple band configurations (A–F bands) - 40 channels per band (programmable) - Optional features: - Weather channels (150–170 MHz) - CTCSS / DCS codes --- ## Key Features - High power AM/FM/SSB transceiver - 10m / export band capability - Multi-band programmable system - Echo and advanced audio control - Large front panel with meter display - Durable, classic radio design --- ## Technical Specifications - **Frequency Range:** 28.000 – 29.695 MHz (programmable) - **Channels:** 40 per band (multi-band) - **Frequency Control:** PLL Synthesizer - **Frequency Stability:** ±5 ppm - **Power Supply:** 13.8V DC - **Dimensions:** 287 x 200 x 61 mm - **Weight:** 1.75 kg - **Antenna Connector:** SO-239 - **Operating Temp:** -20°C to +50°C --- ## Why Choose the ARES II? ✔ High power for extended range ✔ Full SSB capability ✔ Advanced tuning and control features ✔ Flexible programmable platform --- ## Ideal For - Amateur radio operators - Long-distance (DX) communication - Advanced CB/export users - Base or mobile high-performance setups --- ## Straight Talking If you want **serious power and full control over your signal**, this is a proper step up from standard radios. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-ares-ii-am-fm-ssb-radio-classic-appearance-27mhz-cb-radio-high-power/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-ares-ii-am-fm-ssb-radio-classic-appearance-27mhz-cb-radio-high-power/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-ares-ii-am-fm-ssb-radio-classic-appearance-27mhz-cb-radio-high-power/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-ares-ii-am-fm-ssb-radio-classic-appearance-27mhz-cb-radio-high-power/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20AnyTone%20ARES%202%20AM%2FFM%2FSSB%20CB%20Radio%2040w&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-ares-ii-am-fm-ssb-radio-classic-appearance-27mhz-cb-radio-high-power%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-ares-ii-am-fm-ssb-radio-classic-appearance-27mhz-cb-radio-high-power/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-ares-ii-am-fm-ssb-radio-classic-appearance-27mhz-cb-radio-high-power/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-ares-ii-am-fm-ssb-radio-classic-appearance-27mhz-cb-radio-high-power/?share=telegram) - **Product categories:** Anytone, HF Transceivers --- ### [PNI Escort 60 High Power multistandard, FM/AM, 12V, ASQ, RF Gain](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/) **Published:** May 5, 2026 **Author:** Jan **Content:** ## 📡🚗 **PNI Escort HP 60 CB Radio – AM/FM 27MHz – Compact Mobile Transceiver – Multi Function** **Compact • Feature Packed • Reliable Performance** The **PNI Escort HP 60 CB Radio** is a **modern CB radio transceiver** designed for **vehicle installation or base use**, delivering **clear communication across the 27MHz CB band** with a wide range of advanced features. 👉 Perfect for **drivers, off-roaders, and CB enthusiasts**. --- ### 🔥 **Why Choose the PNI HP 60** ✔ **AM & FM Modes** ✔ **Compact & Easy to Install** ✔ **Advanced Features & Controls** ✔ **Clear Display & User Interface** ✔ **EU Compliant (RED Directive)** --- ### 📡 **Performance Highlights** - Frequency Range: **26.965 – 27.405 MHz** - Output Power: **4 Watts** - Frequency Accuracy: **±300 Hz** - Low interference emissions **(< 4 nW)** - Optimised receiver sensitivity for busy channels 👉 Designed for **clear and stable communication**. --- ### 🎛 **Key Functions** ✔ **Manual & Automatic Squelch (ASQ)** ✔ **Channel Scan Function** ✔ **AM / FM Mode Selection** ✔ **Dual Watch (Monitor Two Channels)** ✔ **Channel Memory** ✔ **Roger Beep Tone** ✔ **VFO Mode (Direct Frequency Entry)** --- ### 🖥 **Display & Controls** ✔ Clear LCD display ✔ Shows channel/frequency ✔ Signal strength indication ✔ Active function indicators 👉 Easy to use while driving. --- ### 🚗 **Installation & Power** ✔ Designed for **12V DC operation** ✔ **Reverse polarity protection** ✔ Supplied with **mounting bracket & screws** ✔ Standard connections for antenna & microphone --- ### ⚙️ **Specifications** - Model: **PNI Escort HP 60** - Frequency: **26.965 – 27.405 MHz** - Modes: **AM / FM** - Power Output: **4W** - Antenna Impedance: **50 Ohm** - Power Supply: **12V DC only** --- ### 💡 **Why This Radio Stands Out** ✔ Compact yet powerful ✔ Easy installation in vehicles ✔ Packed with useful features ✔ Suitable for both beginners and experienced users --- ### ⚠️ **Important Notes** ❗ Requires suitable CB antenna (50Ω) ❗ Proper antenna tuning recommended for best performance ❗ Designed for **12V systems only** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB antennas & mounts - Coax cable & connectors - SWR meters & tuning tools - Power accessories --- ### 🔥 **Order Today** **Compact size. Full control. Stay connected.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%2060%20High%20Power%20multistandard%2C%20FM%2FAM%2C%2012V%2C%20ASQ%2C%20RF%20Gain&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-escort-60-high-power-multistandard-fm-am-12v-asq-rf-gain/?share=telegram) - **Product categories:** HF Transceivers, PNI --- ### [Moonraker Titan 10m Multi-Mode AM FM SSB CW Transceiver](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/) **Published:** May 22, 2026 **Author:** Jan **Content:** # 📡 Moonraker Titan 10 Metre Multi-Mode Transceiver ### AM / FM / SSB / CW – Up to 40W Output The **Moonraker Titan** is a powerful multi-mode **10 metre transceiver** designed for serious radio operators. Delivering **up to 40 watts output power**, adjustable via the front panel control, it’s suitable for both base station and mobile installations. --- # 🆕 New Stock – Latest Firmware Installed This is the **new improved version** supplied with the **latest firmware pre-installed**, ready to operate straight out of the box. --- # ⚙️ Key Features ✔ Up to **40W adjustable output power** ✔ Full **10 metre band coverage** ✔ **Multi-mode operation – AM / FM / SSB / CW** ✔ **Export mode capability** (expanded frequency coverage including UK bands) ✔ **Hi-Cut filter** for clearer audio ✔ **Noise Blanker** to reduce interference ✔ **Scan function** ✔ **Dual Watch** feature ✔ **Large rear heatsink** for improved cooling --- # 🔊 Built for Serious Operation The Titan features a **large rear-mounted heatsink**, ensuring stable operation and efficient heat dissipation during long operating sessions. Perfect for extended QSOs. --- # 🎤 Supplied Hand Microphone The included microphone features **channel up / down controls**, ideal when the radio is mounted out of easy reach in a vehicle. --- # 🔌 Rear Panel Connections ✔ 3.5mm jack for **Morse key (CW operation)** ✔ 3.5mm **external speaker jack** ✔ **Standard antenna connection** ✔ **Fused DC power input** --- # 📦 What’s Included ✔ Moonraker Titan transceiver ✔ Hand microphone ✔ Mounting bracket & hardware ✔ Fused DC power lead ✔ Instruction manual --- # 🎯 Ideal For ✔ 10 metre amateur operators ✔ Mobile radio installations ✔ Base station setups ✔ Operators needing higher output power A powerful and versatile transceiver suitable for serious radio use. --- # 🇬🇧 UK Stock – Fast Dispatch ✔ New stock with latest firmware ✔ Trusted radio equipment supplier ✔ No overseas delays Moonraker Titan radio, 10 meter export radio, 10m SSB transceiver, 40W 10m radio. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Moonraker%20Titan%2010m%20Multi-Mode%20AM%20FM%20SSB%20CW%20Transceiver&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmoonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/moonraker-titan-10m-multi-mode-am-fm-ssb-cw-transceiver/?share=telegram) - **Product categories:** HF Transceivers, Moonraker --- ### [rg58 100cm 50 Ohm coax patch lead 1m jumper lead](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **RG58 1m Coax Patch Lead – 50 Ohm MIL-SPEC Jumper Cable – CB / Ham Radio** **Compact • Reliable • Built to Perform** This **1 metre RG58 coax patch lead** is a **high-quality, low-loss jumper cable**, ideal for **connecting radios, SWR meters, and accessories**. 👉 Custom made using **MIL-SPEC RG58** for dependable performance. --- ### ✅ **Key Features** ✔ **1 Metre (100cm) Length** ✔ **MIL-SPEC RG58 Coax** ✔ **50 Ohm Impedance** ✔ **Low Loss Signal Transfer** ✔ **Flexible & Durable Construction** --- ### 📡 **Perfect For** - Connecting radio to SWR meter - Linking SWR meter to antenna system - Short coax jumper leads - CB & amateur radio setups - Test bench and workshop use --- ### 💪 **Premium Build Quality** ✔ Made from **high-quality RG58 coax** ✔ Strong shielding for reduced interference ✔ Built for **long-term reliability** 👉 Not cheap, low-grade patch leads. --- ### ⚙️ **Specifications** - Length: **1 Metre (100cm)** - Cable Type: **MIL-SPEC RG58** - Impedance: **50 Ohm** - Use: **RF patch / jumper lead** --- ### ⚠️ **Important Notes** ❗ Listing is for **patch lead only** ❗ Images may show additional cable for quality demonstration 👉 *(Yes… we really do get asked 😄)* --- ### 💡 **Why Use a Quality Patch Lead** Cheap leads: - Cause signal loss - Introduce interference - Wear out quickly 👉 This ensures **consistent and reliable performance**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Longer coax cables - PL259 connectors - SWR meters & accessories - CB & Ham radio equipment --- ### 🔥 **Order Today** **Short run. Strong signal. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg58%20100cm%2050%20Ohm%20coax%20patch%20lead%201m%20jumper%20lead&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-100cm-50-ohm-coax-patch-lead-1m-jumper-lead/?share=telegram) - **Product categories:** Patch Leads --- ### [RG8X Patch Lead 50cm Mini8 50 Ohm Coaxial Low Loss 0.5m jumper lead](https://cbradio.co.uk/product/rg8x-patch-lead-50cm-mini8-50-ohm-coaxial-low-loss-0-5m-jumper-lead/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **50cm RG8X Mini8 Patch Lead – 0.5m Low Loss 50 Ohm Coax Cable – PL259 Jumper Lead** **Ultra Compact – High Performance Patch Lead** This **50cm (0.5m) Mini8 RG8X coax patch lead** is a **high-quality, low-loss jumper cable**, perfect for **tight installations and short connections** in CB and amateur radio setups. 👉 Custom made using **premium Mini8 coax** for maximum reliability. --- ### ✅ **Why This Patch Lead Stands Out** ✔ **Low Loss Performance** – ideal for short runs ✔ **Compact 50cm Length** – perfect for tight spaces ✔ **Flexible Mini8 (RG8X)** – easy routing ✔ **High Quality Construction** – built to last ✔ **Custom Made Cable** – consistent quality --- ### 📡 **Perfect For** - SWR Meter Connections - Radio to Amplifier Links - Patch / Jumper Leads - CB & Amateur (Ham) Radio - Bench Testing Setups --- ### ⚙️ **Specifications** - Length: **50cm (0.5 metre)** - Cable Type: **Mini8 / RG8X** - Impedance: **50 Ohm** - Performance: **Low Loss** - Connectors: **PL259 (both ends)** *(adjust if needed)* --- ### 💡 **Why Use Mini8 (RG8X)?** - Similar electrical performance to **RG213UBX** - Diameter similar to **RG58** (thin & flexible) - Ideal balance of **low loss and usability** 👉 Perfect for both **mobile installs and base stations**. --- ### ⚠️ **Important Note** ❗ You will receive **only the 50cm patch lead** 👉 Any additional cable shown in images is **for display purposes only** *(Yes… we get asked a lot 😄)* --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - 1m, 2m, 3m patch leads - Coax cable & connectors - Antennas & mounts - SWR meters & accessories --- ### 🔥 **Order Today** **Short, flexible, and built for performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg8x-patch-lead-50cm-mini8-50-ohm-coaxial-low-loss-0-5m-jumper-lead/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg8x-patch-lead-50cm-mini8-50-ohm-coaxial-low-loss-0-5m-jumper-lead/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg8x-patch-lead-50cm-mini8-50-ohm-coaxial-low-loss-0-5m-jumper-lead/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg8x-patch-lead-50cm-mini8-50-ohm-coaxial-low-loss-0-5m-jumper-lead/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG8X%20Patch%20Lead%2050cm%20Mini8%2050%20Ohm%20Coaxial%20Low%20Loss%200.5m%20jumper%20lead&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg8x-patch-lead-50cm-mini8-50-ohm-coaxial-low-loss-0-5m-jumper-lead%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg8x-patch-lead-50cm-mini8-50-ohm-coaxial-low-loss-0-5m-jumper-lead/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg8x-patch-lead-50cm-mini8-50-ohm-coaxial-low-loss-0-5m-jumper-lead/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg8x-patch-lead-50cm-mini8-50-ohm-coaxial-low-loss-0-5m-jumper-lead/?share=telegram) - **Product categories:** Patch Leads --- ### [Mini8 Patch Lead 1M RG8 50 Ohm Coaxial Low Loss 1 metre 3' jumper lead](https://cbradio.co.uk/product/mini8-patch-lead-1m-rg8-50-ohm-coaxial-low-loss-1-metre-3-jumper-lead/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **1m Mini8 RG8X Patch Lead – 50 Ohm Low Loss Coax Cable – PL259 Jumper Lead (3ft)** **Compact, Flexible & Low Loss – Built for Performance** This **1 metre (3ft) Mini8 RG8X coax patch lead** is a **high-quality, low-loss cable**, ideal for **short runs, jumpers, and interconnections** in CB and amateur radio setups. 👉 Hand-assembled using **premium Mini8 coax** for reliability and performance. --- ### ✅ **Why This Patch Lead Stands Out** ✔ **Low Loss Performance** – ideal for short connections ✔ **Flexible Mini8 (RG8X)** – easy to route in tight spaces ✔ **High Quality Construction** – built to last ✔ **Compact 1m Length** – perfect for jump leads ✔ **Hand Made Cable** – quality you can trust --- ### 📡 **Perfect For** - SWR Meter Connections - Radio to Amplifier Links - Patch / Jumper Leads - CB & Amateur (Ham) Radio - Bench Testing Setups --- ### ⚙️ **Specifications** - Length: **1 Metre (100cm / approx. 3ft)** - Cable Type: **Mini8 / RG8X** - Impedance: **50 Ohm** - Performance: **Low Loss** - Connectors: **PL259 (both ends)** *(assumed standard – adjust if needed)* --- ### 💡 **Why Mini8 (RG8X)?** - Similar electrical performance to **RG213UBX** - Much **thinner and more flexible (RG58 size)** - Ideal balance of **performance + usability** 👉 Perfect for both **mobile and base setups**. --- ### ⚠️ **Important Note** ❗ You will receive **only the 1m patch lead** 👉 Any additional cable shown in images is **for quality demonstration only** *(Yes… we’ve been asked 😄)* --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Longer coax cables - PL259 connectors - Antennas & mounts - SWR meters & accessories --- ### 🔥 **Order Today** **Short cable. Big performance. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini8-patch-lead-1m-rg8-50-ohm-coaxial-low-loss-1-metre-3-jumper-lead/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini8-patch-lead-1m-rg8-50-ohm-coaxial-low-loss-1-metre-3-jumper-lead/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini8-patch-lead-1m-rg8-50-ohm-coaxial-low-loss-1-metre-3-jumper-lead/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini8-patch-lead-1m-rg8-50-ohm-coaxial-low-loss-1-metre-3-jumper-lead/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini8%20Patch%20Lead%201M%20RG8%2050%20Ohm%20Coaxial%20Low%20Loss%201%20metre%203%27%20jumper%20lead&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini8-patch-lead-1m-rg8-50-ohm-coaxial-low-loss-1-metre-3-jumper-lead%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini8-patch-lead-1m-rg8-50-ohm-coaxial-low-loss-1-metre-3-jumper-lead/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini8-patch-lead-1m-rg8-50-ohm-coaxial-low-loss-1-metre-3-jumper-lead/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini8-patch-lead-1m-rg8-50-ohm-coaxial-low-loss-1-metre-3-jumper-lead/?share=telegram) - **Product categories:** Patch Leads --- ### [Opek cx-5 Antenna Switch 3 way 1Kw SO-239](https://cbradio.co.uk/product/opek-cx-5-antenna-switch-3-position-1000-watt-antenna-switch-so-239/) **Published:** September 18, 2023 **Author:** Jan **Content:** The **OPEK CX-5 Coaxial Antenna Switch** is a professional-grade **3-way coax switch** designed to give you flexible control over your radio setup. Whether you’re running **multiple radios on one antenna** or **one radio across multiple antennas**, the CX-5 makes switching quick, simple and reliable. --- ## 🔀 Flexible Setup Options ✔ Connect **3 radios to 1 antenna** ✔ Or **1 radio to 3 antennas** ✔ Instantly switch between setups Ideal for base stations, test benches and advanced installations. --- ## 📡 Wide Frequency Coverage - Covers **DC to 500 MHz** - Suitable for: - CB (27 MHz) - VHF / UHF - Amateur radio applications --- ## ⚡ High Power Handling - Up to **1000W PEP (DC–200 MHz)** - Up to **500W PEP (300–500 MHz)** Built to handle serious setups safely. --- ## 🔧 Solid Construction - **Rotary selector switch** for reliable operation - Durable metal housing - Smooth switching action - Designed for long-term use --- ## Key Features - 3-way coaxial antenna switch - SO-239 (UHF female) connectors - Wide frequency range (DC–500 MHz) - High power capability - Compact, bench-friendly design --- ## Technical Specifications - **Frequency Range:** DC – 500 MHz - **Impedance:** 50 Ohms - **Power Handling:** - 1kW PEP (DC – 200 MHz) - 500W PEP (300 – 500 MHz) - **VSWR:** - ≤ 1.5 (DC – 300 MHz) - ≤ 2.0 (300 – 500 MHz) - **Isolation:** ≤ 50 dB - **Connectors:** SO-239 (UHF Female) - **Dimensions:** 93 x 54 x 83 mm --- ## Ideal For - CB radio base stations - Amateur radio setups - Multi-antenna systems - Workshop and testing setups --- ## Why Choose the CX-5? ✔ Simple, reliable switching ✔ High power handling ✔ Wide frequency compatibility ✔ Compact and durable --- ## Straight Talking If you’re running more than one radio or antenna, this is a **simple bit of kit that makes your setup far more flexible**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/opek-cx-5-antenna-switch-3-position-1000-watt-antenna-switch-so-239/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/opek-cx-5-antenna-switch-3-position-1000-watt-antenna-switch-so-239/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/opek-cx-5-antenna-switch-3-position-1000-watt-antenna-switch-so-239/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/opek-cx-5-antenna-switch-3-position-1000-watt-antenna-switch-so-239/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Opek%20cx-5%20Antenna%20Switch%203%20way%201Kw%20SO-239&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fopek-cx-5-antenna-switch-3-position-1000-watt-antenna-switch-so-239%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/opek-cx-5-antenna-switch-3-position-1000-watt-antenna-switch-so-239/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/opek-cx-5-antenna-switch-3-position-1000-watt-antenna-switch-so-239/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/opek-cx-5-antenna-switch-3-position-1000-watt-antenna-switch-so-239/?share=telegram) - **Product categories:** CB radio Accessories --- ### [5 pin DIN CB Radio mic Microphone for Older Midland cb radio Models](https://cbradio.co.uk/product/5-pin-din-cb-radio-mic-microphone-for-older-midland-cb-radio-models/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **5 Pin DIN CB Radio Microphone** is a **brand new replacement mic**, designed for **older CB radios using a 5-pin DIN connection**. Perfect if your original mic is **faulty, missing, or worn out**. --- ## 🎤 Direct Replacement Microphone ✔ Plug-and-play replacement ✔ Restores full transmit function ✔ No modifications required --- ## 🔌 5 Pin DIN Connector ✔ Standard **5 pin DIN plug** ✔ High-quality moulded plastic connector ✔ Secure and reliable connection --- ## 📻 Compatible With Popular Models Works with older radios including: - Cobra 21XFM - Colt 210 / 295 / 355 / 720 - Midland 104 / 104D / 099 / 100M - Maxcom 21E and others ✔ Always check plug type before purchase --- ## 💪 Quality Build ✔ Durable microphone body ✔ Strong cable ✔ Reliable push-to-talk (PTT) switch --- ## 🔧 Easy to Use - Plug into radio - Press PTT to transmit - Ready to go ✔ No setup required --- ## 🔁 Ideal Replacement Perfect if: - Mic is damaged - Cable is worn - PTT switch has failed --- ## 📦 What You Get ✔ 1 x 5 Pin DIN CB Radio Microphone --- ## Key Features - 5 pin DIN CB microphone - Compatible with older radios - Plug-and-play - Durable construction - Replacement solution --- ## Why Choose This Mic? ✔ Simple fix for common faults ✔ Wide compatibility ✔ Reliable performance ✔ Great value --- ## Ideal For - Vintage CB radio users - Truck and taxi radios - Replacement or spare mic - Keeping older radios alive --- ## Straight Talking If your mic’s gone — your radio’s useless. This gets you back on air. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/5-pin-din-cb-radio-mic-microphone-for-older-midland-cb-radio-models/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/5-pin-din-cb-radio-mic-microphone-for-older-midland-cb-radio-models/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/5-pin-din-cb-radio-mic-microphone-for-older-midland-cb-radio-models/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/5-pin-din-cb-radio-mic-microphone-for-older-midland-cb-radio-models/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%205%20pin%20DIN%20CB%20Radio%20mic%20Microphone%20for%20Older%20Midland%20cb%20radio%20Models&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F5-pin-din-cb-radio-mic-microphone-for-older-midland-cb-radio-models%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/5-pin-din-cb-radio-mic-microphone-for-older-midland-cb-radio-models/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/5-pin-din-cb-radio-mic-microphone-for-older-midland-cb-radio-models/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/5-pin-din-cb-radio-mic-microphone-for-older-midland-cb-radio-models/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [Anytone SMART II 12V Mobile CB Radio](https://cbradio.co.uk/product/anytone-smart-ii-cb-12v-mobile-cb-radio/) **Published:** January 25, 2023 **Author:** Jan **Content:** The **Anytone Smart II CB Radio** is a compact, no-nonsense mobile CB designed for **simple, reliable communication**. Small, lightweight and easy to install, it’s ideal for drivers who want **essential CB features without unnecessary complexity**. --- ## 🚗 Compact & Easy to Install ✔ Compact size – fits easily into tight spaces ✔ Lightweight design (421g) ✔ Ideal for cars, vans and basic installs ✔ Simple mounting and setup Perfect for modern vehicles with limited space. --- ## 🌍 Multi-Standard European Operation - Supports multiple country modes: **EU / EUH / CE / UK / PL / E1 / I2 / DE / DEH** - Works across European CB bands - AM / FM operation Ready for use across borders. --- ## 🔊 Simple, Effective Features - **ASQ (Auto Squelch) + Manual Squelch (SQ)** - **Dual Watch** – monitor two channels - **Emergency Channels 9 / 19** - Clear and stable communication Everything you need for everyday use. --- ## Key Features - AM / FM CB radio - Multi-standard European bands - Compact and lightweight design - Dual Watch function - ASQ & manual squelch - Emergency channel access --- ## Technical Specifications - **Frequency Range:** 26.965 – 27.99125 MHz - **Modes:** AM / FM - **Frequency Tolerance:** 0.005% - **Power Supply:** 13.2V DC - **Dimensions:** 104 x 109 x 250 mm - **Weight:** 421 g - **Antenna Connector:** SO-239 - **Operating Temp:** -20°C to +50°C --- ## Why Choose the Smart II? ✔ Simple and easy to use ✔ Compact for tight installations ✔ Reliable everyday performance ✔ Great value entry-level CB --- ## Ideal For - Beginners - Cars and vans - Basic CB setups - Everyday communication --- ## Straight Talking If you want a **small, straightforward CB radio that just works**, this is a solid budget-friendly option. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-smart-ii-cb-12v-mobile-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-smart-ii-cb-12v-mobile-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-smart-ii-cb-12v-mobile-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-smart-ii-cb-12v-mobile-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20SMART%20II%2012V%20Mobile%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-smart-ii-cb-12v-mobile-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-smart-ii-cb-12v-mobile-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-smart-ii-cb-12v-mobile-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-smart-ii-cb-12v-mobile-cb-radio/?share=telegram) - **Product categories:** Anytone --- ### [Mini8 30m Low loss coax RG8x 2 PL259 CB or HAM radio coaxial cable](https://cbradio.co.uk/product/mini8-30m-low-loss-coax-rg8x-2-pl259-cb-or-ham-radio-coaxial-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini-8 RG8 30m Coax Cable** is a **high-quality low loss 50Ω coax**, offering **RG213-style performance in a slimmer, more flexible design**. Ideal for **longer cable runs**, this cable is perfect for **CB and amateur radio base station installations** where performance and ease of routing both matter. --- ## 📡 Low Loss Performance ✔ Comparable to RG213 (RG213UBX) ✔ Reduced signal loss over longer distances ✔ Ideal for base station setups --- ## 🔧 Flexible Mini-8 Design - Diameter: **6.1mm (similar to RG58)** - Much easier to route than RG213 - Ideal for tight spaces and installations ✔ Performance without the bulk --- ## 🔌 Ready to Install ✔ **30 metre length** ✔ **1 x PL259 connector pre-soldered** ✔ Perfect for feeding through walls or conduit ➡️ Option available for both ends to be fitted --- ## 💪 High Quality Construction - **Stranded copper inner conductor** - **Foam polyethylene dielectric** - **95% copper braid shielding** ✔ Strong, flexible and efficient --- ## 📶 Excellent Shielding ✔ Screening effectiveness **>55dB (100–900 MHz)** ✔ Reduces interference and signal noise --- ## ⚡ Technical Performance **Attenuation (dB per 100m):** - 50 MHz – 7.2 dB - 100 MHz – 10.5 dB - 400 MHz – 22.2 dB - 600 MHz – 27.6 dB - 1000 MHz – 37.0 dB - 2400 MHz – 64.5 dB ✔ Reliable across HF, VHF & UHF --- ## 🧵 Quality Materials ✔ Plain copper conductors ✔ Foam dielectric for lower loss ✔ Low smoke PVC outer sheath --- ## 🔁 Other Lengths Available ✔ 10m / 15m / 20m / 25m / 30m / 40m ✔ Mini-8 and RG58 options available --- ## Key Features - Mini-8 RG8 coax cable - 30 metre length - Low loss 50 Ohm - Flexible 6.1mm diameter - PL259 connector fitted --- ## Why Choose This Cable? ✔ Low loss without stiffness ✔ Easy to install ✔ High quality construction ✔ Ideal for longer runs --- ## Ideal For - CB radio base stations - Amateur radio setups - External antenna installs - Shack-to-antenna runs --- ## Straight Talking If you need a **long run without fighting thick cable**, this is exactly what you want. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini8-30m-low-loss-coax-rg8x-2-pl259-cb-or-ham-radio-coaxial-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini8-30m-low-loss-coax-rg8x-2-pl259-cb-or-ham-radio-coaxial-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini8-30m-low-loss-coax-rg8x-2-pl259-cb-or-ham-radio-coaxial-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini8-30m-low-loss-coax-rg8x-2-pl259-cb-or-ham-radio-coaxial-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini8%2030m%20Low%20loss%20coax%20%20RG8x%202%20PL259%20CB%20or%20HAM%20radio%20coaxial%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini8-30m-low-loss-coax-rg8x-2-pl259-cb-or-ham-radio-coaxial-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini8-30m-low-loss-coax-rg8x-2-pl259-cb-or-ham-radio-coaxial-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini8-30m-low-loss-coax-rg8x-2-pl259-cb-or-ham-radio-coaxial-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini8-30m-low-loss-coax-rg8x-2-pl259-cb-or-ham-radio-coaxial-cable/?share=telegram) - **Product categories:** RG8 mini8 --- ### [Power Supply unit 13.8V 5 to 7 Amp PSU](https://cbradio.co.uk/product/power-supply-13-8v-5-to-7-amp-psu-cb-ham-radio-powerpack/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **13.8V 5–7A CB Radio Power Supply Unit** is a **compact, reliable PSU** designed to power **CB and amateur radios at home**. Perfect for turning your mobile radio into a **base station setup**, it delivers stable 13.8V output with built-in protection. --- ## ⚡ Ideal for CB & Ham Radio ✔ Designed for **base station use** ✔ Powers most **standard 4W CB radios** ✔ Suitable for low-power ham equipment --- ## 🔌 Stable 13.8V Output - Fixed **13.8V DC output** - 5A continuous / **7A surge capacity** - Clean and consistent power delivery --- ## 📦 Compact & Practical Design - Small footprint: **110 x 80 x 200 mm** - Lightweight: **1.1 kg** - Easy to place on desk or radio bench --- ## 🧲 Simple Front Panel Connections - Convenient front output terminals - Quick and easy radio connection - Ideal for beginners and home setups --- ## 🔇 Low Noise Operation - Ripple noise: **100mVp-p** - Designed for radio use - Minimises interference --- ## 🛡 Built-In Protection - **Current limiting protection** - Helps protect your equipment - Safe and reliable operation --- ## 🔧 Plug & Play Setup 1. Connect to mains (220V) 2. Connect radio to front terminals 3. Power up and operate ✔ Simple and straightforward --- ## Key Features - 13.8V fixed output PSU - 5A continuous / 7A surge - Compact switch mode design - Front panel connectors - Low ripple noise - Built-in protection --- ## Technical Specifications - **Input Voltage:** 220V AC - **Output Voltage:** 13.8V DC - **Output Current:** 5A (7A surge) - **Ripple Noise:** 100mVp-p - **Dimensions:** 110 x 80 x 200 mm - **Weight:** 1.1 kg --- ## Why Choose This PSU? ✔ Perfect for CB base setups ✔ Compact and easy to use ✔ Reliable and stable output ✔ Great value entry-level unit --- ## Ideal For - Home CB radio setups - Beginner base stations - Low-power amateur radio use - Workshop or bench power --- ## Straight Talking If you want a **simple power supply to run your CB at home**, this does the job without fuss. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/power-supply-13-8v-5-to-7-amp-psu-cb-ham-radio-powerpack/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/power-supply-13-8v-5-to-7-amp-psu-cb-ham-radio-powerpack/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/power-supply-13-8v-5-to-7-amp-psu-cb-ham-radio-powerpack/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/power-supply-13-8v-5-to-7-amp-psu-cb-ham-radio-powerpack/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Power%20Supply%20unit%2013.8V%205%20to%207%20Amp%20PSU&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpower-supply-13-8v-5-to-7-amp-psu-cb-ham-radio-powerpack%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/power-supply-13-8v-5-to-7-amp-psu-cb-ham-radio-powerpack/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/power-supply-13-8v-5-to-7-amp-psu-cb-ham-radio-powerpack/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/power-supply-13-8v-5-to-7-amp-psu-cb-ham-radio-powerpack/?share=telegram) - **Product categories:** Power Supplies and Inverters --- ### [RG58 10m High Quality Mil Spec with 2x PL259 for Ham or CB radio or Scanner](https://cbradio.co.uk/product/rg58-10m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-or-scanner/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 10m RG58 Coax Cable – 95% Braid – Low Loss – 2x PL259 – CB HAM Radio **High Quality • Low Loss • Built Properly** This is **10 metres of extremely high quality RG58 coax cable**, built with a **tight 95% copper braid** for **maximum performance and reliability**. 👉 Don’t confuse this with cheap, thin RG58 — this is **proper cable** --- 🔥 **Why Choose This Cable** ✔ 95% Tinned Copper Braiding ✔ Low Loss Performance ✔ Flexible & Easy to Route ✔ 2x PL259 Connectors Included ✔ Built for Radio Use 👉 Serious quality cable for serious setups --- 📦 **What’s Included** ✔ 10 Metres RG58 Coax Cable ✔ 1x PL259 Plug (Fitted) ✔ 1x PL259 Plug (Loose for fitting) 👉 Feed it through your shack, then fit the plug --- 📡 **Perfect For** CB Radio HAM / Amateur Radio Scanners CCTV Systems 👉 Ideal for HF applications --- ⚙️ **Specifications** - Inner Conductor: 19 x 0.18mm Tinned Copper - Dielectric: Solid PE (2.95mm) - Shielding: 95% Tinned Copper Braid - Outer Sheath: PVC (4.95mm) - Impedance: 50 Ohm --- 💡 **Why This Cable Stands Out** ✔ Proper dense braid = better signal shielding ✔ Less signal loss over distance ✔ Strong, durable outer sheath ✔ Not the cheap import cable you see elsewhere 👉 Make NO mistake — this is serious quality --- 🔧 **Installation** ✔ Run cable to your setup ✔ Solder second PL259 if required ✔ Connect and go 👉 Simple and flexible install --- ⚠️ **Important Notes** ❗ Ensure correct soldering of PL259 for best performance ❗ Suitable for indoor & mobile use ❗ Ideal for radio and signal applications --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: 20m lengths 30m lengths Connectors & adaptors Aerials & mounts --- 🔥 **Order Today** **Proper cable. Better signal. No compromise.** 📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-10m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-10m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-10m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-10m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-or-scanner/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG58%2010m%20High%20Quality%20Mil%20Spec%20with%202x%20PL259%20for%20Ham%20or%20CB%20radio%20or%20Scanner&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-10m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-or-scanner%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-10m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-10m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-10m-high-quality-mil-spec-with-2x-pl259-for-ham-or-cb-radio-or-scanner/?share=telegram) - **Product categories:** RG58 --- ### [Tactical foldable CB hand held antenna aerial BNC](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/) **Published:** May 16, 2026 **Author:** Jan **Content:** # 📡 PNI 47 FLEX BNC Foldable CB Handheld Antenna – 27MHz Upgrade your handheld CB radio with this **high performance 47cm flexible antenna**, designed specifically for 27MHz Citizens Band operation. The **PNI 47-FLEX-BNC** is one of the most powerful and efficient handheld CB antennas available with a BNC connector. --- ## ✅ Key Features • Designed for 27 MHz CB Band • Length: 47 cm for improved radiation efficiency • Flexible / Foldable whip design • BNC Connector • High performance handheld upgrade antenna • Durable construction --- ## 📶 Improved Performance Over Standard Antennas This antenna significantly improves range and signal clarity compared to the short “rubber duck” antennas typically supplied with handheld CB radios. The 47cm length provides: ✔ Better transmit efficiency ✔ Stronger receive performance ✔ Improved communication distance ✔ Reduced signal loss Ideal for mobile, agricultural, trucking and off-road use. --- ## 🔌 Compatible With: • Midland Alan 42 • MAAS KCB-H-1000 • PNI handheld CB radios • Any CB handheld with BNC connector (Please check your radio has a BNC socket before purchase.) --- ## 📏 Technical Specifications Frequency: 27 MHz (CB Band) Length: 47 cm Connector: BNC Type: Flexible Foldable Whip Application: CB Handheld Walkie Talkie --- ## 🚜 Perfect For: • Truck drivers • Farmers • 4×4 users • Green laners • Event marshalling • Portable CB operation ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Tactical%20foldable%20CB%20hand%20held%20antenna%20aerial%20BNC&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftactical-foldable-cb-hand-held-antenna-aerial-bnc%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tactical-foldable-cb-hand-held-antenna-aerial-bnc/?share=telegram) - **Product categories:** PNI CB Antennas --- ### [PNI ML160, cb aerial with mag mount 155 cm](https://cbradio.co.uk/product/pni-ml160-cb-aerial-with-mag-mount-155-cm-26-30mhz/) **Published:** March 20, 2024 **Author:** Jan **Content:** The **PNI ML160 CB Antenna** is a high-performance mobile antenna designed for drivers who want **maximum range and strong, reliable communication**. With its **1.55 metre stainless steel whip**, this antenna delivers a noticeable improvement over shorter models — making it ideal for serious CB users. --- ## 📡 Built for Range ✔ Longer antenna = better performance ✔ Up to **~15 km communication range** (ideal conditions) ✔ Strong transmit and receive capability ✔ Covers **25–30 MHz CB band** If range matters, this is a solid choice. --- ## 🚗 Complete Ready-to-Install Kit - **145mm magnetic base** for strong mounting - **4 metre RG58 coax cable** - **PL259 connector fitted** - **Allen key included** for tuning Everything you need to get on the air. --- ## ⚙️ High Performance Design - Low SWR: **≤ 1.1 at centre frequency** - Handles up to **600W power** - 50 Ohm impedance - Stainless steel construction Built for efficient and reliable operation. --- ## 📏 Why Length Matters A longer antenna improves: - Signal strength - Transmission range - Overall communication quality At **1.55m**, the ML160 offers an excellent balance between performance and practicality. --- ## Key Features - 1.55 metre high-performance antenna - Magnetic mount (145mm base) - 4m RG58 cable included - PL259 connector - Adjustable for SWR tuning - Durable stainless steel whip --- ## Technical Specifications - **Frequency Range:** 25 – 30 MHz - **Length:** 155 cm (including base) - **Impedance:** 50 Ohms - **Maximum Power:** 600W - **SWR:** ≤ 1.1 (centre band) - **Gain:** approx. 1–2 dBi - **Polarisation:** Vertical - **Cable:** 4m RG58 - **Magnetic Base:** 145 mm --- ## What’s in the Box? - PNI ML160 antenna - Magnetic base (145mm) - 4m RG58 coax cable - PL259 connector (fitted) - Allen key for tuning --- ## Why Choose the ML160? ✔ Better range than compact antennas ✔ Strong magnetic base for stability ✔ Ready-to-use complete kit ✔ Ideal upgrade from shorter aerials --- ## Ideal For - Cars, vans and trucks - Drivers wanting improved range - Regular CB users - Motorway and long-distance communication --- ## Straight Talking If you want **real improvement in range without going to a full 2m whip**, this is one of the best upgrades you can make. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-ml160-cb-aerial-with-mag-mount-155-cm-26-30mhz/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-ml160-cb-aerial-with-mag-mount-155-cm-26-30mhz/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-ml160-cb-aerial-with-mag-mount-155-cm-26-30mhz/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-ml160-cb-aerial-with-mag-mount-155-cm-26-30mhz/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20ML160%2C%20cb%20aerial%20with%20mag%20mount%20155%20cm&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-ml160-cb-aerial-with-mag-mount-155-cm-26-30mhz%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-ml160-cb-aerial-with-mag-mount-155-cm-26-30mhz/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-ml160-cb-aerial-with-mag-mount-155-cm-26-30mhz/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-ml160-cb-aerial-with-mag-mount-155-cm-26-30mhz/?share=telegram) - **Product categories:** CB Aerials with mount, PNI CB Antennas --- ### [SWR / Power Meter for CB or 10m SWAR](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/) **Published:** May 19, 2025 **Author:** Jan **Content:** A must-have tool for any CB setup. This **CB SWR & Power Meter** allows you to **check and tune your antenna (SWR)** and monitor your radio’s power output — helping you get the best performance while protecting your equipment. --- ## ⚠️ Why You Need an SWR Meter Running a CB without checking SWR can: ❌ Damage your radio ❌ Reduce transmit range ❌ Cause poor signal quality ✔ This meter helps you **avoid costly mistakes** and ensures your setup is working correctly. --- ## 📡 Simple & Effective - Easy to use, even for beginners - Clear analogue display - Compact and portable - Ideal for mobile and base stations --- ## Key Features - SWR (Standing Wave Ratio) measurement - Power output measurement - Frequency range: **26 – 30 MHz** - Suitable for all CB radios - Durable, compact design --- ## Technical Specifications - **Frequency Range:** 26 – 30 MHz - **Impedance:** 50 Ohms - **Accuracy:** ±5% - **Maximum Power:** 100 Watts - **Dimensions:** 85 x 80 x 58 mm --- ## ⚠️ Important Information - Supplied in **retail packaging with instructions** - **Patch lead NOT included** (required to connect to your radio) - Meter brand may vary depending on stock ✔ All supplied models have **identical specifications and performance** --- ## Ideal For - CB radio beginners - Mobile installations - Antenna tuning - Protecting your radio investment --- ## Straight Talking At this price, it’s simply not worth risking damage to your radio by skipping SWR checks. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SWR%20%2F%20Power%20Meter%20for%20CB%20or%2010m%20SWAR&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fswr-power-meter-for-cb-or-10m-swar%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/swr-power-meter-for-cb-or-10m-swar/?share=telegram) - **Product categories:** SWR meters --- ### [PNI Escort HP 6500 Pro CB radio VOX AM FM](https://cbradio.co.uk/product/ultra-compact-cb-radio-pni-escort-hp6500-v3-uk-eu-80-channel-am-fm-multi-norm/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=RtS0mMv7Kzc[/embed] [contact-form][contact-field label="Name" type="name" required="true" /][contact-field label="Email" type="email" required="true" /][contact-field label="Website" type="url" /][contact-field label="Message" type="textarea" /][/contact-form] **Content:** ## 📡🚗 **PNI Escort HP 6500 PRO CB Radio – Multi-Standard AM/FM – Ultra Compact – VOX + NRC** **Compact • Advanced Features • Crystal Clear Audio** The **PNI Escort HP 6500 PRO** is the **improved version of the popular HP 6500**, featuring an upgraded motherboard, enhanced circuitry, and a **new processor for better performance and reliability**. 👉 A **small radio with big capabilities**. --- ### 🔥 **Why Choose the HP 6500 PRO** ✔ **Upgraded Performance (New Motherboard & Processor)** ✔ **NRC Noise Reduction – Clearer Audio** ✔ **VOX Hands-Free Operation** ✔ **Ultra Compact Design** ✔ **Multi-Standard EU & UK Operation** --- ### 📡 **Multi-Standard Operation** ✔ Works across **UK & European bands** ✔ Supported norms: **EU, CE, UK, PL, I, I2, dE, In** ✔ **40 UK + 40 EU Channels** 👉 Ideal for **cross-border use**. --- ### 🔊 **NRC Noise Reduction Circuit** ✔ Reduces: - Electrical interference - Static noise - Background disturbance 👉 Provides **clearer, more intelligible communication**. --- ### 🎤 **VOX Hands-Free Function** ✔ Automatic transmit without pressing PTT ✔ Adjustable sensitivity ✔ Ideal for **driving or hands-free use** --- ### ⚙️ **Key Features** ✔ **AM / FM Modes** ✔ **4W Output (Legal UK Power)** ✔ **S-Meter Display** ✔ **Manual & Automatic Squelch (ASQ)** ✔ **RF Gain Control** ✔ **Scan Function** ✔ **Channel 9/19 Quick Access** ✔ **Keypad Lock** --- ### 🎛 **Extra Features** ✔ **Detachable Microphone** ✔ **Quick Disconnect Mounting Bracket** ✔ **External Speaker Jack (3.5mm)** ✔ **Blue LCD Display** --- ### 📏 **Specifications** - Modes: **AM / FM** - Power Output: **4W AM / 4W FM** - Size: **120 x 110 x 27 mm** - Weight: **470g** --- ### 🚗 **Perfect For** - Cars & vans - Trucks & 4×4 vehicles - Compact installs - Beginners & experienced users --- ### 💡 **Why This Radio Stands Out** ✔ Extremely compact yet feature-packed ✔ Improved reliability over previous model ✔ Clear audio in noisy environments ✔ Easy to install and use 👉 A **top choice for modern CB setups**. --- ### ⚠️ **Important Notes** ❗ Check selected norm before changing modulation ❗ External antenna required (50Ω) --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB antennas & mounts - Power leads & accessories - SWR meters - Coax cable & connectors --- ### 🔥 **Order Today** **Compact size. Cleaner audio. Better performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ultra-compact-cb-radio-pni-escort-hp6500-v3-uk-eu-80-channel-am-fm-multi-norm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ultra-compact-cb-radio-pni-escort-hp6500-v3-uk-eu-80-channel-am-fm-multi-norm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ultra-compact-cb-radio-pni-escort-hp6500-v3-uk-eu-80-channel-am-fm-multi-norm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ultra-compact-cb-radio-pni-escort-hp6500-v3-uk-eu-80-channel-am-fm-multi-norm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%206500%20Pro%20CB%20radio%20VOX%20AM%20FM&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fultra-compact-cb-radio-pni-escort-hp6500-v3-uk-eu-80-channel-am-fm-multi-norm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ultra-compact-cb-radio-pni-escort-hp6500-v3-uk-eu-80-channel-am-fm-multi-norm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ultra-compact-cb-radio-pni-escort-hp6500-v3-uk-eu-80-channel-am-fm-multi-norm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ultra-compact-cb-radio-pni-escort-hp6500-v3-uk-eu-80-channel-am-fm-multi-norm/?share=telegram) - **Product categories:** PNI --- ### [PL259 UHF connector plugs 9mm screw on for RG213 brown insulator twin pack](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-9mm-screw-on-for-rg213-brown-insulator-twin-pack/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PL259 UHF Connector Twin Pack (9mm RG213)** is a **high-quality set of heavy-duty connectors**, designed specifically for **RG213 coax cable**. Built with **heat-resistant brown insulators**, these plugs won’t melt during soldering — unlike cheaper alternatives. --- ## 🔥 Brown Heat-Resistant Insulator ✔ Won’t deform when soldering ✔ Maintains internal alignment ✔ Reliable long-term performance ✔ No more melted white inserts --- ## 🔌 Designed for RG213 Cable ✔ Fits **~9mm coax (RG213)** ✔ Secure and proper fit ✔ Ideal for thicker, high-power cables --- ## 📡 Standard PL259 (UHF) Connector ✔ Compatible with **SO239 sockets** ✔ Widely used across: - CB radio - Amateur (ham) radio - Scanner systems --- ## 💪 Heavy Duty Construction ✔ Solid metal body ✔ Strong and durable ✔ Built for repeated use --- ## 🔧 Easy Installation ✔ Screw-on outer body ✔ Solder centre pin ✔ Suitable for DIY or professional installs --- ## 📦 Twin Pack Value ✔ **2 x PL259 connectors included** ✔ Perfect for making or repairing cables --- ## 📻 Multi-Use Applications Ideal for: - Custom coax builds - RG213 cable terminations - Base station setups - High power installations --- ## Key Features - PL259 UHF connectors - 9mm cable fit (RG213) - Brown heat-resistant insulator - Twin pack - 50 Ohm --- ## Why Choose These Connectors? ✔ Don’t melt during soldering ✔ Strong and reliable ✔ Designed for RG213 cable ✔ Great value --- ## Ideal For - CB radio users - Amateur radio operators - DIY cable builds - Workshop use --- ## Straight Talking If you’re using RG213, don’t ruin it with cheap connectors — use proper ones. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-9mm-screw-on-for-rg213-brown-insulator-twin-pack/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-9mm-screw-on-for-rg213-brown-insulator-twin-pack/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-9mm-screw-on-for-rg213-brown-insulator-twin-pack/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-9mm-screw-on-for-rg213-brown-insulator-twin-pack/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PL259%20UHF%20connector%20plugs%209mm%20screw%20on%20for%20RG213%20brown%20insulator%20twin%20pack&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-uhf-connector-plugs-9mm-screw-on-for-rg213-brown-insulator-twin-pack%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-9mm-screw-on-for-rg213-brown-insulator-twin-pack/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-9mm-screw-on-for-rg213-brown-insulator-twin-pack/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-9mm-screw-on-for-rg213-brown-insulator-twin-pack/?share=telegram) - **Product categories:** PL259 Connectors --- ### [PL259 UHF connector plugs 7mm screw on for RG8 mini8 brown insulator twin pack](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-7mm-screw-on-for-rg8-mini8-brown-insulator-twin-pack/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PL259 UHF Connector Twin Pack (7mm RG8 Mini-8)** is a **high-quality set of screw-on/solder type plugs**, designed for **RG8 / Mini-8 coax cable**. Built with **heat-resistant brown insulators**, these are a **proper upgrade over cheap connectors** that melt during soldering. --- ## 🔥 Brown Heat-Resistant Insulator ✔ Won’t melt during soldering ✔ Maintains internal structure ✔ Better long-term reliability ✔ Unlike cheap white insert versions --- ## 🔌 Designed for RG8 / Mini-8 ✔ Fits **~7mm coax cable** ✔ Ideal for RG8X (Mini-8) and similar ✔ Secure and reliable fit --- ## 📡 Standard PL259 (UHF) Connector ✔ Widely used in: - CB radio - Amateur (ham) radio - Scanner systems ✔ Compatible with SO239 sockets --- ## 💪 Quality Construction ✔ Strong metal body ✔ Reliable electrical connection ✔ Built for repeated use --- ## 🔧 Easy Installation ✔ Screw-on outer body ✔ Solder centre pin ✔ Suitable for DIY or professional installs --- ## 📦 Twin Pack Value ✔ **2 x PL259 connectors included** ✔ Ideal for making or repairing cables --- ## 📻 Multi-Use Applications Perfect for: - Custom coax cables - Repairs and replacements - Base station installs - Mobile setups --- ## Key Features - PL259 UHF connectors - 7mm cable fit (RG8 / Mini-8) - Brown heat-resistant insulator - Twin pack - 50 Ohm --- ## Why Choose These Connectors? ✔ Don’t melt when soldering ✔ Strong and reliable ✔ Better than cheap alternatives ✔ Great value --- ## Ideal For - CB radio users - Amateur radio operators - DIY cable builds - Workshop use --- ## Straight Talking If you’ve ever melted a cheap plug — you’ll appreciate these straight away. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-7mm-screw-on-for-rg8-mini8-brown-insulator-twin-pack/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-7mm-screw-on-for-rg8-mini8-brown-insulator-twin-pack/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-7mm-screw-on-for-rg8-mini8-brown-insulator-twin-pack/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-7mm-screw-on-for-rg8-mini8-brown-insulator-twin-pack/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PL259%20UHF%20connector%20plugs%207mm%20screw%20on%20for%20RG8%20mini8%20brown%20insulator%20twin%20pack&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-uhf-connector-plugs-7mm-screw-on-for-rg8-mini8-brown-insulator-twin-pack%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-7mm-screw-on-for-rg8-mini8-brown-insulator-twin-pack/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-7mm-screw-on-for-rg8-mini8-brown-insulator-twin-pack/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-7mm-screw-on-for-rg8-mini8-brown-insulator-twin-pack/?share=telegram) - **Product categories:** PL259 Connectors --- ### [rg213 mil spec patch jumper lead 1m with 2 pl259 connectors cb ham radio](https://cbradio.co.uk/product/rg213-mil-spec-patch-jumper-lead-1m-with-2-pl259-connectors-cb-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG213 1m Patch Lead (PL259 to PL259)** is a **high-quality, low-loss coax jumper**, hand made in our workshop using **mil-spec RG213 cable and premium PL259 connectors**. Perfect for **short interconnections** where **performance and reliability matter**. --- ## 📡 Low Loss, High Performance ✔ Genuine **RG213 mil-spec cable** ✔ Excellent signal transfer ✔ Ideal for high-power and low-loss applications --- ## 🔧 Hand Made Quality ✔ Assembled in-house ✔ Carefully soldered connectors ✔ Built to professional standards ✔ Not mass-produced --- ## 🔌 Premium PL259 Connectors ✔ High-quality plugs used ✔ Strong, reliable connection ✔ Suitable for repeated use --- ## 📏 Perfect 1 Metre Length ✔ Ideal for: - Radio to SWR meter - Amplifier to radio - Equipment interconnects ✔ Clean, tidy installs --- ## 💪 Heavy Duty Construction - Thick RG213 coax - Excellent shielding - Durable outer sheath ✔ Built for demanding use --- ## ⚡ Suitable for High Power ✔ Handles higher RF power levels ✔ Ideal for base station setups --- ## 📻 Multi-Use Cable Perfect for: - CB radio - Amateur (ham) radio - Amplifier connections - Test equipment setups --- ## Key Features - 1m RG213 coax patch lead - PL259 to PL259 - Low loss mil-spec cable - Hand made construction - High power capable --- ## Why Choose This Lead? ✔ Better than cheap pre-made leads ✔ Reliable long-term performance ✔ Proper soldered connections ✔ Built by radio users --- ## Ideal For - Base station setups - Radio to amplifier links - SWR meter connections - Professional installs --- ## Straight Talking If you want a **proper patch lead that won’t let you down**, this is the one. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg213-mil-spec-patch-jumper-lead-1m-with-2-pl259-connectors-cb-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg213-mil-spec-patch-jumper-lead-1m-with-2-pl259-connectors-cb-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg213-mil-spec-patch-jumper-lead-1m-with-2-pl259-connectors-cb-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg213-mil-spec-patch-jumper-lead-1m-with-2-pl259-connectors-cb-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg213%20mil%20spec%20patch%20jumper%20lead%201m%20with%202%20pl259%20connectors%20cb%20ham%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg213-mil-spec-patch-jumper-lead-1m-with-2-pl259-connectors-cb-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg213-mil-spec-patch-jumper-lead-1m-with-2-pl259-connectors-cb-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg213-mil-spec-patch-jumper-lead-1m-with-2-pl259-connectors-cb-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg213-mil-spec-patch-jumper-lead-1m-with-2-pl259-connectors-cb-ham-radio/?share=telegram) - **Product categories:** Patch Leads --- ### [2 X metal microphone mic holder clips](https://cbradio.co.uk/product/2-x-metal-microphone-mike-holder-clips-with-screws-pair-of-cb-radio-mic-clip/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Metal CB Microphone Clips (Pair)** are a **simple, durable solution** for securely mounting your CB radio microphone. Supplied as a **pair of heavy-duty metal clips**, they are compatible with **most CB and radio microphones**. --- ## 🔩 Universal Compatibility ✔ Fits most CB radio microphones ✔ Suitable for mobile and base setups ✔ Works with standard mic hangers --- ## 💪 Durable Metal Construction - Strong metal build - Long-lasting and reliable - Won’t snap like plastic versions ✔ Built to last --- ## 🚗 Clean & Tidy Installation ✔ Keeps microphone secure and accessible ✔ Prevents cables hanging loose ✔ Improves in-vehicle organisation --- ## 🔧 Easy to Install - Mount with screws (not included) - Fix to dashboard, console or wall - Clip microphone into place ✔ Quick and simple --- ## 📦 Supplied as a Pair ✔ **2 x metal microphone clips included** ✔ Ideal for multiple setups or spare --- ## 🏠 Suitable for All Setups - Cars and vans - Trucks and 4x4s - Home base stations - Workshops and shacks --- ## Key Features - Metal CB microphone clips - Universal fit - Durable construction - Easy installation - Supplied as a pair --- ## Why Choose These Clips? ✔ Stronger than plastic alternatives ✔ Keeps your setup tidy ✔ Simple and effective solution ✔ Great value --- ## Ideal For - CB radio users - Amateur radio setups - Vehicle installs - Replacement mic clips --- ## Straight Talking It’s a small upgrade — but it makes your setup **tidier and easier to use every day**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-x-metal-microphone-mike-holder-clips-with-screws-pair-of-cb-radio-mic-clip/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-x-metal-microphone-mike-holder-clips-with-screws-pair-of-cb-radio-mic-clip/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-x-metal-microphone-mike-holder-clips-with-screws-pair-of-cb-radio-mic-clip/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-x-metal-microphone-mike-holder-clips-with-screws-pair-of-cb-radio-mic-clip/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%20X%20metal%20microphone%20mic%20holder%20clips&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-x-metal-microphone-mike-holder-clips-with-screws-pair-of-cb-radio-mic-clip%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-x-metal-microphone-mike-holder-clips-with-screws-pair-of-cb-radio-mic-clip/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-x-metal-microphone-mike-holder-clips-with-screws-pair-of-cb-radio-mic-clip/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-x-metal-microphone-mike-holder-clips-with-screws-pair-of-cb-radio-mic-clip/?share=telegram) - **Product categories:** CB radio Accessories --- ### [CB aerial PNI S60 cable mount and PL plug](https://cbradio.co.uk/product/cb-antenna-aerial-pni-s60-butterfly-cable-mount-and-pl-plug/) **Published:** February 23, 2023 **Author:** Jan **Content:** The **PNI S60 CB Antenna** is a compact and practical solution for drivers who need **reliable CB communication in a shorter, more manageable size**. With a **59cm fibreglass whip** and adjustable angle base, it’s ideal for vehicles that regularly encounter **height restrictions like garages and car parks**. --- ## 🚗 Compact & Practical Design ✔ Short length: **59 cm** ✔ Ideal for **cars, vans and urban use** ✔ Easier to manage than longer antennas ✔ Discreet, low-profile setup --- ## 📡 Reliable Everyday Performance - Covers **CB band (27 MHz)** - SWR ≤ **1.2:1** (properly tuned) - Up to **~10 km range** (ideal conditions) - Handles up to **200W power** A solid choice for everyday communication. --- ## 🔧 Adjustable Angle Mount - **Tilt function with butterfly screw** - Easily lower the antenna for: - Garages - Car parks - Low-clearance areas ⚠️ For best performance, keep tilt under **30° during use** --- ## 🔌 Ready to Install - Includes **4m RG58 coax cable** - Easy connection to your CB radio - Flexible mounting position on vehicle --- ## Key Features - 59cm compact CB antenna - Adjustable tilt mechanism - Fibreglass construction - 4m cable included - Easy installation --- ## Technical Specifications - **Frequency Range:** CB band (27 MHz) - **Length:** 59 cm - **Impedance:** 50 Ohms - **Maximum Power:** 200W - **SWR:** ≤ 1.2:1 - **Cable Length:** 4 metres (RG58) - **Material:** Fibreglass --- ## Why Choose the S60? ✔ Compact and easy to live with ✔ Adjustable for height restrictions ✔ Reliable performance for its size ✔ Simple, practical installation --- ## Ideal For - Cars and vans - Urban driving - Low-height parking areas - Users wanting a smaller antenna --- ## Straight Talking You won’t get the range of a 1.5m antenna — but for **convenience and everyday use**, this does the job well. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-antenna-aerial-pni-s60-butterfly-cable-mount-and-pl-plug/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-antenna-aerial-pni-s60-butterfly-cable-mount-and-pl-plug/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-antenna-aerial-pni-s60-butterfly-cable-mount-and-pl-plug/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-antenna-aerial-pni-s60-butterfly-cable-mount-and-pl-plug/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20aerial%20PNI%20S60%20cable%20mount%20and%20PL%20plug&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-antenna-aerial-pni-s60-butterfly-cable-mount-and-pl-plug%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-antenna-aerial-pni-s60-butterfly-cable-mount-and-pl-plug/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-antenna-aerial-pni-s60-butterfly-cable-mount-and-pl-plug/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-antenna-aerial-pni-s60-butterfly-cable-mount-and-pl-plug/?share=telegram) - **Product categories:** PNI CB Antennas --- ### [New Volvo FH.4 CB Antenna Adaptor 7mm to 3/8 Fitting for CB Radio Aerial](https://cbradio.co.uk/product/new-volvo-fh-4-cb-antenna-adaptor-7mm-to-3-8-fitting-for-cb-radio-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚛📡 **Volvo FH4 CB Antenna Adaptor – 7mm to 3/8 Thread – Fit Standard CB Aerials** **Simple Fix • Perfect Fit • No Hassle Upgrade** This **7mm to 3/8 CB antenna adaptor** is designed specifically for newer **Volvo FH4 trucks**, allowing you to **fit standard 3/8 CB aerials onto the newer 7mm stud mounts**. 👉 Ideal for upgrading or reusing your existing aerial on newer Volvo models. --- ### 🔥 **Why You Need This Adaptor** ✔ **Converts 7mm Stud to Standard 3/8 Thread** ✔ **Lets You Use Existing CB Antennas** ✔ **Quick & Easy Installation** ✔ **Strong, Secure Connection** --- ### 🔧 **The Problem It Solves** - New Volvo trucks use **7mm aerial stud** - Most CB antennas use **3/8 thread** 👉 Without this adaptor, your aerial simply won’t fit. --- ### ✅ **Key Features** ✔ **7mm to 3/8 Conversion** ✔ **Designed for Volvo FH4 & newer trucks** ✔ **Durable Metal Construction** ✔ **Compact & Easy to Install** --- ### 🚛 **Perfect For** - Volvo FH4 truck owners - Truck drivers upgrading CB setups - Reusing existing 3/8 CB aerials - Fleet installations --- ### ⚙️ **Specifications** - Type: **Antenna Thread Adaptor** - Input: **7mm Stud (Vehicle Side)** - Output: **3/8 Thread (Aerial Side)** - Material: **Metal Construction** --- ### 💡 **Why This Adaptor Matters** ✔ Saves buying a new antenna ✔ Ensures proper fit and performance ✔ Maintains strong electrical connection 👉 A **must-have for Volvo CB installs**. --- ### ⚠️ **Important Notes** ❗ Designed for **new Volvo trucks with 7mm stud** ❗ Check your mount size before purchase --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB aerials (3/8 fitting) - Coax cable & connectors - Mounts & brackets - CB radios --- ### 🔥 **Order Today** **Make it fit. Get back on air. No compromise.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/new-volvo-fh-4-cb-antenna-adaptor-7mm-to-3-8-fitting-for-cb-radio-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/new-volvo-fh-4-cb-antenna-adaptor-7mm-to-3-8-fitting-for-cb-radio-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/new-volvo-fh-4-cb-antenna-adaptor-7mm-to-3-8-fitting-for-cb-radio-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/new-volvo-fh-4-cb-antenna-adaptor-7mm-to-3-8-fitting-for-cb-radio-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20New%20Volvo%20FH.4%20CB%20Antenna%20Adaptor%207mm%20to%203%2F8%20Fitting%20for%20CB%20Radio%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fnew-volvo-fh-4-cb-antenna-adaptor-7mm-to-3-8-fitting-for-cb-radio-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/new-volvo-fh-4-cb-antenna-adaptor-7mm-to-3-8-fitting-for-cb-radio-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/new-volvo-fh-4-cb-antenna-adaptor-7mm-to-3-8-fitting-for-cb-radio-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/new-volvo-fh-4-cb-antenna-adaptor-7mm-to-3-8-fitting-for-cb-radio-aerial/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [Uniden Bearcat UBC125XLT scanner Pre Programmed with military airband alpha tagg](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-scanner-pre-programmed-with-military-airband-alpha-tagg/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Uniden UBC125XLT Handheld Scanner** is a **compact, powerful 500-channel scanner**, ideal for listening to a wide range of radio communications across **airband, marine, and general VHF/UHF frequencies**. Pre-configured for UK use, it’s perfect for enthusiasts who want a **ready-to-go scanner straight out of the box**. --- ## 📡 Wide Frequency Coverage ✔ **25–88 MHz** ✔ **108–174 MHz (Airband + VHF)** ✔ **225–512 MHz** ✔ **806–960 MHz** ✔ Covers a huge range of signals --- ## ✈️ Airband Ready (Pre-Programmed) ✔ Includes **455 UK military aircraft frequencies** ✔ Civil and military air traffic monitoring ✔ Ideal for airshows and aviation enthusiasts --- ## 📻 500 Channel Memory ✔ 500 programmable channels ✔ Stored across **10 banks** ✔ Easy organisation and access --- ## 🔍 Close Call RF Capture ✔ Automatically detects nearby transmissions ✔ Tunes in instantly ✔ Great for finding active frequencies --- ## 🏷 Alpha Tagging ✔ Name your channels ✔ Quickly identify frequencies ✔ Easier navigation --- ## 🔇 Advanced Squelch Control ✔ CTCSS / DCS modes ✔ Reduces unwanted signals ✔ Cleaner listening --- ## ⚡ Powerful Scanning Features - Priority scan - Turbo search - Custom search ranges - Scan delay/resume - Lockout functions ✔ Fast and flexible scanning --- ## 🔋 Portable & Rechargeable ✔ Includes **2 x AA 2300mAh NiMH batteries** ✔ USB charging via supplied cable ✔ Charge from: - Wall adaptor (optional) - Car USB adaptor - PC or laptop --- ## 💻 PC Programmable ✔ USB connection for programming ✔ Manage channels easily ✔ Expand functionality --- ## 📦 What’s Included ✔ Uniden UBC125XLT Handheld Scanner ✔ Antenna ✔ Belt clip ✔ Hand strap ✔ 2 x rechargeable AA batteries ✔ USB charging cable ✔ User manual --- ## ⚠️ Important Notes ❗ **Cannot receive police or emergency services** ❗ Headphone socket only – **not suitable for external speakers** --- ## Key Features - 500 channel handheld scanner - Wide frequency coverage - Pre-programmed UK airband - Close Call RF capture - USB rechargeable --- ## Why Choose the UBC125XLT? ✔ Ready to use out of the box ✔ Excellent airband performance ✔ Compact and portable ✔ Reliable Uniden quality --- ## Ideal For - Aviation enthusiasts - Scanner hobbyists - Event monitoring - General radio listening --- ## Straight Talking If you want a **solid, no-nonsense scanner that actually finds signals**, this is one of the best in its class. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-scanner-pre-programmed-with-military-airband-alpha-tagg/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-scanner-pre-programmed-with-military-airband-alpha-tagg/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-scanner-pre-programmed-with-military-airband-alpha-tagg/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-scanner-pre-programmed-with-military-airband-alpha-tagg/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Uniden%20Bearcat%20UBC125XLT%20scanner%20Pre%20Programmed%20with%20military%20airband%20alpha%20tagg&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Funiden-bearcat-ubc125xlt-scanner-pre-programmed-with-military-airband-alpha-tagg%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-scanner-pre-programmed-with-military-airband-alpha-tagg/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-scanner-pre-programmed-with-military-airband-alpha-tagg/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/uniden-bearcat-ubc125xlt-scanner-pre-programmed-with-military-airband-alpha-tagg/?share=telegram) - **Product categories:** Scanners and Aerials --- ### [Magnetic taxi mag antenna private hire PMR radio aerial kit with BNC connector](https://cbradio.co.uk/product/magnetic-taxi-mag-antenna-private-hire-pmr-radio-aerial-kit-with-bnc-connector/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **TX-6 Taxi Magnetic Antenna Kit** is a **high-quality VHF antenna system** designed specifically for **taxi, private hire and commercial radio users**. Reliable communication is critical — and this kit delivers **strong, consistent signal performance** when you need it most. --- ## 🚕 Built for Taxi & Private Hire Use ✔ Designed for **professional drivers** ✔ Reliable day-to-day communication ✔ Essential for dispatch and fleet systems ✔ No reception = no work --- ## 📡 VHF 1/4 Wave Performance - Frequency: **164–174 MHz** - 1/4 wave design for efficient transmission - **SWR < 1.5:1** ✔ Strong, stable signal --- ## 🚗 Magnetic Mount Installation - **3.5” (9cm) magnetic base** - Secure hold on vehicle roof - Waterproof construction ✔ Quick install – no drilling --- ## 🔌 Complete Ready-to-Use Kit - **Approx. 4m RG58 coax cable** - Pre-fitted **BNC connector** - Fully assembled and ready to go ✔ Plug straight into your radio --- ## 💪 Durable Construction - Black anodised steel whip - Strong and flexible - Built for daily commercial use --- ## 📏 Practical Size - Antenna length: **51 cm** - Compact but efficient - Ideal for urban environments --- ## 🔧 Standard Mounting Thread - **3/8″ x 24 thread mount** - Compatible with standard antenna bases --- ## Key Features - VHF taxi antenna kit - Magnetic mount base - BNC connector - 1/4 wave design - RG58 coax cable included --- ## Technical Specifications - **Frequency:** 164–174 MHz - **Type:** 1/4 wave - **Length:** 51 cm - **SWR:** < 1.5:1 - **Mount:** 3.5” magnetic base (3/8″ x 24) - **Cable:** ~4m RG58 - **Connector:** BNC --- ## Why Choose the TX-6? ✔ Reliable VHF communication ✔ Easy installation ✔ Durable for daily use ✔ Complete kit included --- ## Ideal For - Taxi drivers - Private hire vehicles - Fleet operators - Commercial radio users --- ## Straight Talking If your radio is your livelihood, this is the kind of antenna you want on the roof. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/magnetic-taxi-mag-antenna-private-hire-pmr-radio-aerial-kit-with-bnc-connector/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/magnetic-taxi-mag-antenna-private-hire-pmr-radio-aerial-kit-with-bnc-connector/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/magnetic-taxi-mag-antenna-private-hire-pmr-radio-aerial-kit-with-bnc-connector/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/magnetic-taxi-mag-antenna-private-hire-pmr-radio-aerial-kit-with-bnc-connector/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Magnetic%20taxi%20mag%20antenna%20private%20hire%20PMR%20radio%20aerial%20kit%20with%20BNC%20connector&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmagnetic-taxi-mag-antenna-private-hire-pmr-radio-aerial-kit-with-bnc-connector%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/magnetic-taxi-mag-antenna-private-hire-pmr-radio-aerial-kit-with-bnc-connector/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/magnetic-taxi-mag-antenna-private-hire-pmr-radio-aerial-kit-with-bnc-connector/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/magnetic-taxi-mag-antenna-private-hire-pmr-radio-aerial-kit-with-bnc-connector/?share=telegram) - **Product categories:** Taxi Aerials --- ### [springer stinger 1.55m cb radio antenna and flat bar mirror mount aerial kit](https://cbradio.co.uk/product/springer-stinger-1-55m-cb-radio-antenna-and-flat-bar-mirror-mount-aerial-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **CB Mirror Mount Kit with Springer/Stinger Antenna** is a **complete heavy-duty antenna setup** designed for **trucks, 4x4s, vans and off-road vehicles**. Supplied with a **flat bar double groove mount, 3/8” fitting, RG58 coax and a powerful springer antenna**, this kit is built for **serious real-world use**. --- ## 📦 Complete Mount & Antenna Kit ✔ Double groove mirror/roof rack mount ✔ **Springer/Stinger heavy-duty antenna** ✔ Approx. **3m RG58 coax cable** ✔ PL259 connector fitted ✔ Everything you need in one package --- ## 🚛 Designed for Mirror Arms & Roof Bars - Fits bars from **8mm to 25mm diameter** - Ideal for: - Mirror arms - Roof racks - Bull bars ✔ Flexible mounting options --- ## 📡 Heavy Duty Springer / Stinger Antenna - **Base-loaded coil design** - Flexible stainless steel whip - Built for **rugged environments** ✔ Trusted design since the 90s --- ## 💪 Built for Tough Conditions Perfect for: - Truck drivers - Farmers - Off-road vehicles - Utility and work vehicles ✔ Handles vibration, impacts and harsh use --- ## 🎨 Colour Options Available - Standard: **Black** - Optional (UK customers): - Red, White, Blue, Yellow, Green, Orange, Chrome ✔ Contact before purchase for colour choice --- ## 📏 Strong Performance Specs - Length: **1.55m** - Power handling: **1000W** - Frequency: **26–28 MHz** - SWR: approx. **1.5:1** - Impedance: **50 Ohm** --- ## 🔌 Standard 3/8″ Fitting - Universal **3/8 UNF mount** - Compatible with most CB setups - Easy installation --- ## Key Features - Mirror / bar mount antenna kit - Springer / Stinger antenna included - 3/8″ fitting - 3m RG58 coax cable - PL259 connector - Heavy-duty construction - Colour options available --- ## Why Choose This Kit? ✔ Complete ready-to-fit solution ✔ Built for harsh environments ✔ Strong and flexible antenna ✔ Proven best-selling design --- ## Ideal For - Trucks and HGVs - 4x4s and off-road vehicles - Agricultural machinery - Roof rack or mirror mounting setups --- ## Straight Talking If you want a **tough CB setup that can handle real work and rough conditions**, this kit is built for it. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/springer-stinger-1-55m-cb-radio-antenna-and-flat-bar-mirror-mount-aerial-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/springer-stinger-1-55m-cb-radio-antenna-and-flat-bar-mirror-mount-aerial-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/springer-stinger-1-55m-cb-radio-antenna-and-flat-bar-mirror-mount-aerial-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/springer-stinger-1-55m-cb-radio-antenna-and-flat-bar-mirror-mount-aerial-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20springer%20stinger%201.55m%20cb%20radio%20antenna%20and%20flat%20bar%20mirror%20mount%20aerial%20kit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fspringer-stinger-1-55m-cb-radio-antenna-and-flat-bar-mirror-mount-aerial-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/springer-stinger-1-55m-cb-radio-antenna-and-flat-bar-mirror-mount-aerial-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/springer-stinger-1-55m-cb-radio-antenna-and-flat-bar-mirror-mount-aerial-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/springer-stinger-1-55m-cb-radio-antenna-and-flat-bar-mirror-mount-aerial-kit/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [AV-1000 1.8-160/430-1300MHz PWR SWR METER](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/) **Published:** February 23, 2023 **Author:** Jan **Content:** The **AV-1000 SWR Power Meter** is a versatile, multi-band meter designed for **HF, VHF, UHF and 23cm operation**. With a **large, easy-to-read display**, multiple power ranges and both **AVG and PEP measurement**, it’s ideal for monitoring and protecting your radio equipment across a wide frequency range. --- ## 📡 Wide Frequency Coverage Covers multiple bands in one unit: - **HF:** 1.8 – 160 MHz - **UHF:** 430 – 450 MHz - **Higher UHF / 23cm:** 800 – 930 MHz / 1240 – 1300 MHz ✔ Suitable for CB, amateur radio and multi-band setups --- ## 📊 Accurate Power & SWR Readings - Measures **Forward Power, Reflected Power & SWR** - Switchable **AVG / PEP readings** - Multiple power ranges: - 5W / 20W / 200W / 400W --- ## 👀 Large Clear Display - Easy-to-read analogue meter - Clear scale for accurate readings - Built-in illumination (requires 12V supply) --- ## 🔌 Dual Connector Types - **SO-239 (HF: 1.8–160 MHz)** - **N-Type (430–1300 MHz)** Designed for proper matching across different bands. --- ## Key Features - Multi-band SWR & power meter - AVG / PEP measurement modes - Wide frequency coverage - Large analogue display - Built-in lamp (12V required) - Compact bench design --- ## Technical Specifications - **Frequency Range:** - 1.8 – 160 MHz - 430 – 450 MHz - 800 – 930 MHz - 1240 – 1300 MHz - **Power Ranges:** 5W / 20W / 200W / 400W - **Measurement Modes:** AVG / PEP - **Connectors:** - SO-239 (HF) - N-Type (UHF/SHF) - **Dimensions:** 155 x 63 x 103 mm - **Weight:** 870 g --- ## ⚠️ Brand Note Supplied as one of the following (depending on stock): - Moonraker - Avair - Sharman ✔ Identical design and performance — only branding differs --- ## Ideal For - Amateur radio operators - Multi-band radio setups - Base station installations - Workshop and testing environments --- ## Why Choose the AV-1000? ✔ Covers multiple frequency bands in one unit ✔ Accurate power and SWR readings ✔ Large, easy-to-read display ✔ Reliable, proven design --- ## Straight Talking If you run **more than one band**, this saves you needing multiple meters — simple as that. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20AV-1000%201.8-160%2F430-1300MHz%20PWR%20SWR%20METER&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sharman-av-1000-1-8-160-430-1300mhz-5-400w-pwr-swr-meter/?share=telegram) - **Product categories:** SWR meters --- ### [Anti vibration ring for the Sirio 827 homebase CB Radio Antenna Aerial](https://cbradio.co.uk/product/anti-vibration-ring-for-the-sirio-827-homebase-cb-radio-antenna-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔧 **Sirio 827 Anti-Vibration Nylon Ring Kit – Stabiliser for Sirio 827 CB Base Antenna** **Reduce Vibration • Improve Stability • Protect Your Antenna** The **Sirio 827 Anti-Vibration Nylon Ring Kit** is an **essential upgrade for Sirio 827 users**, designed to **reduce radial movement, vibration, and wind noise (howling)**. Perfect for improving the **overall stability and performance** of your base station antenna. --- ### ✅ **Why You Need This Kit** ✔ **Reduces Vibration & Movement** – stabilises radial arms ✔ **Stops “Howling” Noise** in windy conditions ✔ **Improves Antenna Stability** – especially in exposed locations ✔ **Protects Your Investment** – reduces long-term stress on antenna parts ✔ **Easy to Fit** – suitable for new or already installed antennas --- ### 📡 **Designed For** - **Sirio 827 Base Antenna Users** - High-wind or exposed installations - Anyone experiencing radial vibration or noise --- ### ⚙️ **Features & Specifications** - Material: **Durable Nylon Construction** - Function: **Radial Stabilisation / Anti-Vibration Support** - Compatibility: **Sirio 827 Antenna** - Installation: **Simple bolt-on fitment** --- ### 📦 **What’s Included** - ✔ 2 x Nylon Ring Sections - ✔ 1 x User Manual - ✔ 1 x Set of Fixing Screws --- ### ⚠️ **Why It Matters** Without proper stabilisation: - Radials can vibrate in wind - Noise (“howling”) can occur - Long-term wear can damage your antenna 👉 This kit provides a **simple but highly effective solution**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - Sirio antennas & accessories - Coax cable & connectors - Mounts & brackets - SWR meters & tuning tools --- ### 🔥 **Order Today** **A small upgrade that makes a big difference.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anti-vibration-ring-for-the-sirio-827-homebase-cb-radio-antenna-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anti-vibration-ring-for-the-sirio-827-homebase-cb-radio-antenna-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anti-vibration-ring-for-the-sirio-827-homebase-cb-radio-antenna-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anti-vibration-ring-for-the-sirio-827-homebase-cb-radio-antenna-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anti%20vibration%20ring%20for%20the%20Sirio%20827%20homebase%20CB%20Radio%20Antenna%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanti-vibration-ring-for-the-sirio-827-homebase-cb-radio-antenna-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anti-vibration-ring-for-the-sirio-827-homebase-cb-radio-antenna-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anti-vibration-ring-for-the-sirio-827-homebase-cb-radio-antenna-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anti-vibration-ring-for-the-sirio-827-homebase-cb-radio-antenna-aerial/?share=telegram) - **Product categories:** CB Aerials, Homebase Aerials --- ### [ML75 foldable CB aerial 26-28MHz 300w](https://cbradio.co.uk/product/ml75-foldable-cb-aerial-26-28mhz-300w/) **Published:** August 19, 2025 **Author:** Jan **Content:** The **PNI ML75 CB Antenna** is a compact, high-quality mobile aerial designed for drivers who need **reliable CB performance in a shorter, practical form factor**. At just **75cm in length**, it’s ideal for vehicles where a full-size antenna isn’t practical, while still delivering solid communication performance for everyday use. --- ## Compact Size – Reliable Performance Don’t let the size fool you — the ML75 offers: ✔ Strong, stable signal for its size ✔ Up to 8 km range (ideal conditions) ✔ Excellent SWR performance (<1.2:1) ✔ Suitable for cars, vans and trucks Perfect for urban driving, delivery vehicles, and low-clearance environments. --- ## Key Features - **75cm Compact Design** – Ideal where height is restricted - **PL Mount (No Cable)** – Compatible with magnetic bases and fixed mounts - **Tilt Function (90°)** – Easily fold down for garages and car parks - **High Efficiency for Size** - **Up to 300W Power Handling (short duration)** --- ## Technical Specifications - **Model:** ML75 - **Frequency Range:** 26 – 28 MHz - **Length:** 75 cm - **Mount Type:** PL (Threaded) - **SWR:** < 1.2:1 - **Maximum Power:** 300W (short duration) - **Thread Size:** Ø16 mm - **Tiltable:** Yes (90° fold-down) --- ## Installation Notes - Requires a **PL magnetic base or fixed mount (not included)** - Must be **SWR tuned after installation** for best performance - Positioning on the vehicle will affect range and signal quality --- ## Compatible Mounts & Accessories Works with standard PL mounts such as: - Magnetic bases (e.g. PNI 145/PL) - Boot lip mounts (e.g. PNI T941, SPA100) - Mirror mounts (e.g. SPA110, SPA120) - Fixed body mounts (L1, L2, L20, L21) --- ## Ideal For - Cars and vans with height restrictions - Truck drivers needing a low-profile solution - Urban environments and car parks - Users wanting a discreet CB setup --- ## Why Choose the ML75? If you need a **short, practical antenna that still performs**, the ML75 is a smart choice: - Easy to live with day-to-day - No constant removal needed - Good balance of size vs performance ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ml75-foldable-cb-aerial-26-28mhz-300w/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ml75-foldable-cb-aerial-26-28mhz-300w/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ml75-foldable-cb-aerial-26-28mhz-300w/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ml75-foldable-cb-aerial-26-28mhz-300w/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20ML75%20foldable%20CB%20aerial%2026-28MHz%20300w&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fml75-foldable-cb-aerial-26-28mhz-300w%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ml75-foldable-cb-aerial-26-28mhz-300w/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ml75-foldable-cb-aerial-26-28mhz-300w/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ml75-foldable-cb-aerial-26-28mhz-300w/?share=telegram) - **Product categories:** PNI CB Antennas --- ### [ML180 mag mount CB aerial 194cm 26-30MHz](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/) **Published:** August 19, 2025 **Author:** Jan **Content:** The **PNI ML180 CB Antenna** is a high-performance magnetic mount antenna designed for drivers who want **maximum range and reliable signal performance** from their CB radio. With its full-length **1.94 metre whip**, this antenna delivers excellent transmit and receive capability across the CB band, making it a solid choice for both everyday use and long-distance communication. --- ## Built for Performance A longer antenna means better efficiency — and the ML180 delivers exactly that. ✔ Stronger transmit signal ✔ Improved receive sensitivity ✔ Stable performance across the band ✔ Handles high power with ease Ideal for truckers, 4×4 users and anyone serious about CB performance. --- ## Key Features - **Magnetic Mount Base** – Quick installation, no drilling required - **High Power Handling** – Up to 1000 Watts - **Full-Length Whip (1.94m)** – Enhanced range and efficiency - **Adjustable SWR** – Fine-tune for optimal performance - **Wide Frequency Coverage** – 26–30 MHz --- ## Technical Specifications - **Model:** ML180 - **Frequency Range:** 26 – 30 MHz - **Antenna Length:** 194 cm - **Mount Type:** Magnetic (Mag Mount) - **Maximum Power:** 1000 Watts - **Adjustable:** Yes (SWR tuning required) --- ## Installation & Tuning For best performance: - Mount centrally on the vehicle roof where possible - Ensure a clean metal surface for proper grounding - **SWR tuning is required after installation** to protect your radio and maximise performance --- ## Suitable For - Cars, vans and HGVs - CB radio users wanting maximum range - Mobile installations without permanent fitting - 10 metre band use (where permitted by licence) --- ## Why Choose the ML180? If you want a **noticeable upgrade over shorter antennas**, the ML180 delivers: - Better range - Stronger signal - More consistent communication It’s a simple upgrade that makes a real difference on the road. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20ML180%20mag%20mount%20CB%20aerial%20194cm%2026-30MHz&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fml180-mag-mount-cb-aerial-194cm-26-30mhz%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ml180-mag-mount-cb-aerial-194cm-26-30mhz/?share=telegram) - **Product categories:** PNI CB Antennas --- ### [MAAS YELLOWSTAR-27 5/8 Wave CB Base Antenna](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/) **Published:** January 16, 2026 **Author:** Jan **Content:** # The **MAAS Elektronik YELLOWSTAR-27** is a premium 5/8 wave CB base antenna engineered in Germany for serious 27 MHz operators who want performance, durability and portability in one package. Constructed from high-quality aluminium, this antenna is **lightweight yet extremely robust**, making it ideal for permanent home installation or portable expedition setups. The threaded section design allows for quick assembly and disassembly — packing down to just **1.1 metres** for easy transport. If you’re looking for a high-gain, high-power CB base antenna that performs as well on a field trip as it does on a rooftop mast, the YELLOWSTAR-27 is hard to beat. --- ## Why Choose the YELLOWSTAR-27? ✔ 5/8 Wave design for improved ground wave performance ✔ Covers full CB Band: 26.2 – 27.8 MHz ✔ 5.5 dBi gain for extended range ✔ Handles up to 500 Watts ✔ Breaks down to 1.1m for portability ✔ Strong aluminium construction ✔ Ideal for home base or expedition use --- ## Perfect For: - Home base CB stations - 4×4 expeditions - Temporary field setups - Events and portable operating - High-power AM/FM/SSB CB setups --- ## Technical Specifications - **Model:** YELLOWSTAR-27 - **Brand:** MAAS - **Type:** 5/8 Wave Base Antenna - **Frequency Range:** 26.2 – 27.8 MHz - **Gain:** 5.5 dBi - **Polarisation:** Vertical - **Impedance:** 50 Ohms - **VSWR:** < 1.5 - **Maximum Power:** 500 Watts - **Total Length:** 6 metres - **Radials:** 3 × 90 cm - **Connector:** PL Female (SO-239) - **Mast Compatibility:** 30 – 55 mm diameter - **Material:** Aluminium --- ## Performance Advantage of 5/8 Wave Design The 5/8 wave configuration provides a **lower radiation angle** compared to 1/4 wave antennas, giving you better ground-wave propagation and improved local range — ideal for UK CB conditions. --- ## Installation Notes - Mount to a suitable mast (30–55mm diameter). - Use quality 50 Ohm coax (RG213 recommended for base use). - Check SWR before full power operation. - Ensure correct grounding for optimal performance. ![](data:image/jpeg;base64,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) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MAAS%20YELLOWSTAR-27%205%2F8%20Wave%20CB%20Base%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmaas-yellow-star-27-cb-radio-home-base-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/maas-yellow-star-27-cb-radio-home-base-antenna/?share=telegram) - **Product categories:** Homebase Aerials --- ### [Sirio Signal Keeper CB Base or Loft Antenna](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/) **Published:** March 9, 2026 **Author:** Jan **Content:** ## 📡 Sirio Signal Keeper – Loft or Mast Mount CB Antenna ### Compact Base Station Solution The **Sirio Signal Keeper** is the perfect solution if you cannot install a full-size outdoor CB antenna on your property. Designed for loft installation, indoor corner mounting, or mast top fitting. --- ## 🏠 Ideal For Restricted Installations ✔ Loft mounting ✔ Indoor corner installation ✔ Mast mounting (35–40mm diameter) ✔ Discreet setups ✔ Limited space environments Excellent option for properties with planning restrictions. --- ## ⚙️ Technical Specifications - Type: 1/4 Wave Base Loaded Ground Plane - Frequency Range: 26–28 MHz - Impedance: 50 Ohm (Unbalanced) - Radiation Pattern: 360° Omnidirectional - Polarisation: Vertical - Gain: 0 dBd / 2.15 dBi - Bandwidth @ SWR 2:1: 850 KHz - SWR @ Resonant Frequency: ≤ 1.2:1 - Length: 1.3 Metres - Max Power: 100 Watts --- ## 📶 Performance in a Compact Package Despite its smaller size, the Signal Keeper offers: ✔ Stable omnidirectional coverage ✔ Low SWR ✔ Reliable base station performance ✔ Quality Sirio construction Ideal for local communication where full-size antennas are not possible. --- ## 📦 What’s Included 1 x Sirio Signal Keeper CB Antenna (Mast hardware as supplied by manufacturer) --- ## 🇬🇧 UK Stock – Fast Dispatch ✔ Ships from UK ✔ No overseas delays ✔ Trusted radio equipment seller ![](data:image/jpeg;base64,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) Please note that postage to Northern Ireland, Highlands Channel islands etc are subject to a courier surcharge and DO NOT qualify as domestic shipping!!. These are Courier rates that we have to pay and are beyond our control. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20Signal%20Keeper%20CB%20Base%20or%20Loft%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-signal-keeper-cb-base-or-loft-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-signal-keeper-cb-base-or-loft-antenna/?share=telegram) - **Product categories:** Homebase Aerials --- ### [Micro CB antenna PNI ML29 34 cm 70mm magnet](https://cbradio.co.uk/product/micro-cb-antenna-pni-ml29-length-34-cm-with-70-mm-magnet-and-4m-rg58/) **Published:** March 20, 2024 **Author:** Jan **Content:** The **PNI ML29 CB Antenna** is a compact, budget-friendly solution for drivers who want **quick, simple CB installation without a large aerial**. At just **34cm in total height**, it’s ideal for low-clearance environments while still providing reliable short-range communication. --- ## 🚗 Small Size – Practical Everyday Use ✔ Ultra-compact design (34cm total height) ✔ **70mm magnetic base** – quick install, no drilling ✔ Easy to remove when not in use ✔ Ideal for cars, vans and occasional use Perfect for users who need convenience over maximum range. --- ## 📡 Ready to Use Out of the Box - Supplied with **4 metre RG58 coax cable** - Fitted with **PL259 plug** - Compatible with all standard CB radios - Quick plug-and-play installation --- ## 🔊 Performance Overview - Designed for **26–28 MHz CB band** - Suitable for **short-range communication (up to ~7 km in ideal conditions)** - SWR < 2:1 at band centre - Handles up to **500W (short duration)** A practical solution for everyday driving and basic communication. --- ## Key Features - Compact 34cm antenna - Magnetic base (Ø70 mm) - 4m RG58 cable included - PL259 connector fitted - Lightweight and portable - Easy installation and removal --- ## Technical Specifications - **Frequency Range:** 26 – 28 MHz - **Length:** 34 cm (total height) - **Whip Length:** approx. 230 mm - **Impedance:** 50 Ohms - **Maximum Power:** 500W (short duration) - **SWR:** < 2:1 - **Gain:** > 3 dBi - **Polarisation:** Vertical - **Cable:** 4m RG58 - **Connector:** PL259 (UHF male) - **Magnet Base:** 70 mm - **Weight:** 250 g - **Operating Temp:** -26°C to +80°C --- ## What’s in the Box? - PNI ML29 antenna - Magnetic base - 4m RG58 coax cable - PL259 connector (fitted) --- ## Why Choose the ML29? This antenna is ideal if you want: ✔ A **small, discreet CB setup** ✔ Quick installation with no tools ✔ Budget-friendly option ✔ Easy removal for security or storage --- ## Ideal For - Cars with height restrictions - Occasional CB users - Beginners - Urban environments and car parks --- ## Straight Talking If you want **maximum range**, go bigger. If you want **simple, compact and hassle-free**, this is spot on. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/micro-cb-antenna-pni-ml29-length-34-cm-with-70-mm-magnet-and-4m-rg58/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/micro-cb-antenna-pni-ml29-length-34-cm-with-70-mm-magnet-and-4m-rg58/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/micro-cb-antenna-pni-ml29-length-34-cm-with-70-mm-magnet-and-4m-rg58/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/micro-cb-antenna-pni-ml29-length-34-cm-with-70-mm-magnet-and-4m-rg58/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Micro%20CB%20antenna%20PNI%20ML29%2034%20cm%2070mm%20magnet&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmicro-cb-antenna-pni-ml29-length-34-cm-with-70-mm-magnet-and-4m-rg58%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/micro-cb-antenna-pni-ml29-length-34-cm-with-70-mm-magnet-and-4m-rg58/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/micro-cb-antenna-pni-ml29-length-34-cm-with-70-mm-magnet-and-4m-rg58/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/micro-cb-antenna-pni-ml29-length-34-cm-with-70-mm-magnet-and-4m-rg58/?share=telegram) - **Product categories:** CB Aerials with mount, PNI CB Antennas --- ### [Midland 78 Pro Multi CB Radio 4W AM FM EU UK](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/) **Published:** March 2, 2026 **Author:** Jan **Content:** ## 📻 Midland Alan 78 Plus Multi ### One of Europe’s Most Popular Multiband CB Radios The original and still one of the most trusted CB radios for European travel. Designed for drivers crossing borders — simply select the correct legal band for the country you’re in. --- ## 🚛 Ideal For ✔ Truck drivers ✔ 4×4 & off-road users ✔ Campervans & motorhomes ✔ Cross-border European travel 12V operation — perfect for vehicle installation. --- ## 🔊 Advanced Noise Control Engineered to handle noisy vehicle environments: ✔ Digital Squelch (DS) – Automatically removes background hiss ✔ Noise Blanker (NB) – Reduces ignition & electrical interference ✔ PLL Synthesised Tuner – Stable frequency control Clear, stable audio even in modern vehicles. --- ## 🔎 Key Features ✔ Large backlit LCD display ✔ Digital S-Meter ✔ Multi-standard European band selection ✔ AM / FM modes (country dependent) ✔ EMG button (Instant Channel 9 access) ✔ Channel scan function ✔ 6-pin microphone socket ✔ External speaker socket ✔ External S-meter socket ✔ Precision Series microphone (Up / Down / Lock) ✔ Mounting bracket included --- ## 📐 Technical Specifications - Output Power: 4W AM/FM (Legal Limit) - Voltage: 12V DC - Dimensions: 150 x 45 x 175mm - Weight: 1.02kg - Antenna Connector: SO-239 --- ## 📦 Supplied With ✔ Midland Alan 78 Plus Multi Radio ✔ Precision Series Microphone ✔ Mounting Bracket ✔ Power Lead ✔ User Manual --- ## 🚚 Why Buy From Us? ✔ Genuine European Multi-Standard Version ✔ Legal 4W Output – No Export Modifications ✔ Trusted UK CB Specialist ✔ Fast Dispatch ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Midland%2078%20Pro%20Multi%20CB%20Radio%204W%20AM%20FM%20EU%20UK&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmidland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/midland-78-pro-cb-radio-transceiver-am-fm-12v-multi-standard/?share=telegram) - **Product categories:** Midland --- ### [4 pin coffin mic Uniden wired replacement cb radio microphone](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-uniden-wired-replacement-mic/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **4 Pin Coffin CB Microphone (Uniden Wired)** is a **popular handheld replacement mic**, designed for **clear audio and reliable performance** across a wide range of CB radios. Built in the classic **“coffin” style**, it’s comfortable to hold and easy to use. --- ## 🎤 Classic “Coffin” Design ✔ Ergonomic handheld shape ✔ Comfortable grip ✔ Easy push-to-talk operation --- ## 🔌 4 Pin Uniden Wiring ✔ Pre-wired for **Uniden-style 4 pin radios** ✔ Plug-and-play replacement ✔ No rewiring required (for compatible models) --- ## 📻 Wide Compatibility Works with many radios using Uniden wiring, including brands such as: - Midland - President - Cobra - Stalker - Audioline ✔ Always check wiring before purchase --- ## 🔊 Clear Audio Performance ✔ Omni-directional dynamic microphone ✔ Good voice clarity ✔ Reliable transmit audio --- ## 📏 Flexible Coiled Cable ✔ **6ft curly cable** ✔ Expands when needed ✔ Keeps install tidy --- ## 💪 Durable Build ✔ Rubberised cable ✔ Strong housing ✔ Built for daily use --- ## 🔧 Also Available ✔ Other wiring options ✔ Without plug ✔ Different radio configurations ➡️ See our other listings --- ## Technical Specifications - **Type:** Omni-directional dynamic - **Sensitivity:** -76dB ±4dB - **Impedance:** 500Ω @ 1kHz - **Frequency Response:** 200–5 kHz - **Cable:** 6ft coiled (3 core + 1 shield) --- ## 📦 What You Get ✔ 1 x 4 Pin Coffin CB Microphone (Uniden Wired) --- ## Key Features - 4 pin Uniden wired mic - Classic coffin design - Dynamic microphone - Coiled 6ft cable - Wide compatibility --- ## Why Choose This Mic? ✔ Reliable replacement ✔ Comfortable to use ✔ Clear audio output ✔ Easy plug-and-play --- ## Ideal For - CB radio users - Replacement microphones - Truck and mobile setups - Everyday communication --- ## Straight Talking If your mic is crackling or dead — this gets you back on air properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-uniden-wired-replacement-mic/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-uniden-wired-replacement-mic/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-uniden-wired-replacement-mic/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-uniden-wired-replacement-mic/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20pin%20coffin%20mic%20Uniden%20wired%20replacement%20cb%20radio%20microphone&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-pin-coffin-cb-radio-microphone-uniden-wired-replacement-mic%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-uniden-wired-replacement-mic/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-uniden-wired-replacement-mic/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-uniden-wired-replacement-mic/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [Astatic Road Devil Power Mic tear-drop](https://cbradio.co.uk/product/astatic-road-devil-amplified-cb-radio-microphone-power-mic-tear-drop-design/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Astatic Road Devil RD104E Microphone** is one of the most **powerful amplified CB microphones available**, designed to deliver **maximum talk power and clarity** — even in noisy environments. If you want to be **heard loud and clear**, this mic does exactly that. --- ## 🔊 High Gain Amplified Audio ✔ Built-in **high gain amplifier** ✔ Electronic equalisation for clarity ✔ Strong, punchy transmit audio ⚠️ *This mic is LOUD – adjust gain carefully to avoid distortion or feedback* --- ## 🎤 Designed for Noisy Environments - Cuts through **engine, road and wind noise** - Ideal for trucks, 4x4s and mobile setups - Clear communication under tough conditions --- ## ⚙️ Adjustable Output Control - Variable gain control - Fine-tune your audio level - Match perfectly with your radio --- ## 🔌 Wide Compatibility - **4-pin standard connector** (Cobra, Uniden, Galaxy etc.) - **6-wire cable system** allows rewiring for other radios ✔ Compatible with most CB and many radio transceivers --- ## 🔋 Battery Powered Amplifier - Requires **1 × 9V battery** (not included) - Powers internal amplification circuit --- ## 💪 Rugged Build Quality - Tough **ABS housing** - Polyurethane-coated **steel grille** - Built for heavy everyday use --- ## 📏 Flexible Coiled Cable - Durable coiled cord - Strain relief for longevity - Comfortable reach during use --- ## Key Features - Amplified CB power microphone - High gain output - Adjustable audio level - 4-pin connector (rewire compatible) - Noise-cutting performance - Heavy-duty construction --- ## Technical Specifications - **Frequency Response:** 50 – 10,000 Hz - **Impedance:** 100 Ohm - **Connector:** 4-Pin - **Cable:** 6-wire (5 conductors + shield) - **Power:** 9V battery required --- ## Why Choose the Road Devil? ✔ Maximum transmit power ✔ Excellent clarity in noise ✔ Trusted Astatic performance ✔ Built for serious users --- ## Ideal For - CB radio users - HGV / truck drivers - Noisy vehicle environments - Users wanting louder transmit audio --- ## Straight Talking If your current mic sounds weak, this will **transform your transmit audio — just don’t turn it up too far**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/astatic-road-devil-amplified-cb-radio-microphone-power-mic-tear-drop-design/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/astatic-road-devil-amplified-cb-radio-microphone-power-mic-tear-drop-design/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/astatic-road-devil-amplified-cb-radio-microphone-power-mic-tear-drop-design/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/astatic-road-devil-amplified-cb-radio-microphone-power-mic-tear-drop-design/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Astatic%20Road%20Devil%20Power%20Mic%20tear-drop&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fastatic-road-devil-amplified-cb-radio-microphone-power-mic-tear-drop-design%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/astatic-road-devil-amplified-cb-radio-microphone-power-mic-tear-drop-design/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/astatic-road-devil-amplified-cb-radio-microphone-power-mic-tear-drop-design/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/astatic-road-devil-amplified-cb-radio-microphone-power-mic-tear-drop-design/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [Scarlet Warrior Wide band coverage long base CB Radio antenna Modulator Aerial](https://cbradio.co.uk/product/scarlet-warrior-wide-band-coverage-long-base-cb-radio-antenna-modulator-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚛 **Scarlet Warrior CB Antenna – 1.9m Wideband Bullwhip – 3/8 Modulator Style 25–30MHz** **Extra Long • Wideband • High Performance** The **Scarlet Warrior Wide Band CB Antenna** is a **long, high-performance bullwhip-style aerial** designed for **maximum range and wideband coverage** across the CB spectrum. 👉 Built for users who want **strong signal and standout performance**. --- ### 🔥 **Why Choose the Scarlet Warrior** ✔ **Extra Long 1.9m Design for Maximum Range** ✔ **Wideband Coverage (25–30 MHz)** ✔ *Strong Signal Performance (10+ Mile Range)*\* ✔ **Durable Stainless Steel Whip** ✔ **Perfect Upgrade from Shorter Antennas** --- ### 📡 **Performance Highlights** - Frequency Range: **25–30 MHz** - Covers full **80 channel CB band** - **Low VSWR ≤ 1.5:1** - **Power handling up to 500W** 👉 Designed for **excellent TX & RX performance**. --- ### 🚛 **Perfect For** - Trucks & HGVs - 4×4 & off-road vehicles - Vans & pickups - Base station use - Users wanting maximum range --- ### ⚙️ **Specifications** - Type: **1/4 Wave Base Loaded Mobile Antenna** - Length: **1.90 Metres** - Coil Length: **460 mm** - Coil Diameter: **22 mm** - Power Handling: **Up to 500 Watts** - Impedance: **50 Ohms** - VSWR: **≤ 1.5:1** - Fitting: **Standard 3/8 UNF Thread** - Whip: **17/7 PH Stainless Steel** --- ### 💡 **Why Go Longer** Short antennas: - Reduced range - Lower efficiency 👉 This antenna: ✔ Better signal strength ✔ Increased range ✔ Improved performance across band --- ### 🔧 **Installation Tips** ✔ Use a **solid 3/8 mount** ✔ Ensure good grounding ✔ Mount as high and clear as possible --- ### ⚠️ **Important Notes** ❗ Height clearance required (1.9m) ❗ Performance depends on installation and location ❗ *Range varies depending on conditions* --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Heavy duty mounts - Coax cable & connectors - SWR meters & tuning tools - CB radios --- ### 🔥 **Order Today** **Go longer. Go stronger. Get the performance.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/scarlet-warrior-wide-band-coverage-long-base-cb-radio-antenna-modulator-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/scarlet-warrior-wide-band-coverage-long-base-cb-radio-antenna-modulator-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/scarlet-warrior-wide-band-coverage-long-base-cb-radio-antenna-modulator-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/scarlet-warrior-wide-band-coverage-long-base-cb-radio-antenna-modulator-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Scarlet%20Warrior%20Wide%20band%20coverage%20long%20base%20CB%20Radio%20antenna%20Modulator%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fscarlet-warrior-wide-band-coverage-long-base-cb-radio-antenna-modulator-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/scarlet-warrior-wide-band-coverage-long-base-cb-radio-antenna-modulator-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/scarlet-warrior-wide-band-coverage-long-base-cb-radio-antenna-modulator-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/scarlet-warrior-wide-band-coverage-long-base-cb-radio-antenna-modulator-aerial/?share=telegram) - **Product categories:** Modulators --- ### [Retractable Gear-Keeper Mic-Keeper](https://cbradio.co.uk/product/retractable-gear-keeper-mic-keeper-cb-mic-microphone-mike-holder-clip/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Gear Keeper Retractable CB Microphone Holder** by **Hammerhead Industries** is the **original, high-quality retractable mic holder** — not a cheap copy. Designed to **keep your microphone secure, accessible, and out of the way**, it’s a **massive upgrade over standard clips or bungee cords**. --- ## 🔁 Grab It. Use It. Let It Go. ✔ Pull mic down to use ✔ Release it — automatically retracts ✔ Returns neatly to headliner ✔ No more fumbling or re-hanging --- ## 🚫 Say Goodbye to Bungee Problems ✔ No swinging around ✔ No hitting your head ✔ No dropping the mic ✔ Controlled, smooth retraction --- ## 🎤 Secure & Always Ready ✔ Keeps mic within easy reach ✔ Adjustable hanging length ✔ Elastic loop for mic button --- ## 💪 Genuine Heavy-Duty Build ✔ **Nylon-coated stainless steel cable** ✔ Stainless steel spring and hardware ✔ Built to last — not cheap plastic --- ## 📏 Performance Specs - **Extension:** 71cm (28″) - **Retraction force:** 255g - **Breaking strength:** 27.2kg (60 lbs) ✔ Strong and reliable --- ## 🔧 Easy Mounting System ✔ Snap clip mount ✔ Attaches to included **D-ring** ✔ Simple install in cab --- ## 🚗 Perfect for Vehicle Use Ideal for: - Trucks - Vans - 4×4 vehicles - Work vehicles ✔ Keeps cab tidy and professional --- ## 📦 What You Get ✔ 1 x Gear Keeper Retractable CB Microphone Holder ✔ D-ring mount ✔ Elastic lanyard loop --- ## Key Features - Retractable mic holder - Stainless steel cable - Smooth controlled retraction - Adjustable length - Heavy duty build --- ## Why Choose the Gear Keeper? ✔ Genuine Hammerhead USA product ✔ Stronger and smoother than copies ✔ Keeps mic secure and tidy ✔ Long-lasting quality --- ## Ideal For - CB radio users - Truck drivers - Off-road vehicles - Professional installs --- ## Straight Talking Once you use one of these, you won’t go back to clips or bungees. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/retractable-gear-keeper-mic-keeper-cb-mic-microphone-mike-holder-clip/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/retractable-gear-keeper-mic-keeper-cb-mic-microphone-mike-holder-clip/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/retractable-gear-keeper-mic-keeper-cb-mic-microphone-mike-holder-clip/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/retractable-gear-keeper-mic-keeper-cb-mic-microphone-mike-holder-clip/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Retractable%20Gear-Keeper%20Mic-Keeper&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fretractable-gear-keeper-mic-keeper-cb-mic-microphone-mike-holder-clip%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/retractable-gear-keeper-mic-keeper-cb-mic-microphone-mike-holder-clip/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/retractable-gear-keeper-mic-keeper-cb-mic-microphone-mike-holder-clip/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/retractable-gear-keeper-mic-keeper-cb-mic-microphone-mike-holder-clip/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [Dummy Load resistor 50 Ohm 15 Watt for CB Amateur marine and PMR Radio PL259](https://cbradio.co.uk/product/dummy-load-resistor-50-ohm-15-watt-for-cb-amateur-marine-and-pmr-radio-pl259/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **15W RF Dummy Load PL259** is a **compact, air-cooled 50Ω load**, ideal for **testing and tuning radios without transmitting over the air**. A must-have tool for **safe bench testing and diagnostics**. --- ## 📡 Safe Testing Without Transmitting ✔ Test radios without using an antenna ✔ Prevents interference with others ✔ Ideal for bench work and fault finding --- ## ⚡ Power Handling ✔ **15W continuous** ✔ **20W CW max** ✔ Up to **100W for short bursts (2 seconds)** ✔ Suitable for low to mid-power radios --- ## 📶 Wide Frequency Coverage ✔ **DC – 800 MHz** ✔ Works across: - CB (27 MHz) - PMR - 10m / 2m / 70cm - Some HF applications --- ## 📉 Excellent Match ✔ **VSWR: 1.1:1** ✔ Minimises reflected power ✔ Accurate testing results --- ## 🔌 Standard PL259 Connection ✔ Direct fit to SO239 sockets ✔ Plug-and-play with most radios and test gear --- ## ❄️ Air-Cooled Finned Design ✔ Metal heat sink body ✔ Dissipates heat effectively ✔ Reliable under load --- ## 📏 Compact & Portable - Size: **34 x 72mm** - Weight: **76g** ✔ Easy to keep in your toolkit --- ## 📻 Ideal For - CB radio testing - Amateur radio setups - SWR tuning checks - Bench diagnostics --- ## 📦 What You Get ✔ 1 x 15W RF Dummy Load PL259 --- ## Key Features - 15W RF dummy load - 50 Ohm impedance - DC–800 MHz range - PL259 connector - Compact finned design --- ## Why Choose This Dummy Load? ✔ Safe and simple testing ✔ Good match (low VSWR) ✔ Compact and reliable ✔ Great value --- ## 🚚 UK Stock ✔ Fast dispatch from the UK ✔ No import delays or extra charges --- ## Straight Talking If you’re testing radios without one of these, you’re doing it the hard way. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/dummy-load-resistor-50-ohm-15-watt-for-cb-amateur-marine-and-pmr-radio-pl259/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/dummy-load-resistor-50-ohm-15-watt-for-cb-amateur-marine-and-pmr-radio-pl259/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/dummy-load-resistor-50-ohm-15-watt-for-cb-amateur-marine-and-pmr-radio-pl259/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/dummy-load-resistor-50-ohm-15-watt-for-cb-amateur-marine-and-pmr-radio-pl259/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Dummy%20Load%20resistor%2050%20Ohm%2015%20Watt%20for%20CB%20Amateur%20marine%20and%20PMR%20Radio%20PL259&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdummy-load-resistor-50-ohm-15-watt-for-cb-amateur-marine-and-pmr-radio-pl259%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/dummy-load-resistor-50-ohm-15-watt-for-cb-amateur-marine-and-pmr-radio-pl259/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/dummy-load-resistor-50-ohm-15-watt-for-cb-amateur-marine-and-pmr-radio-pl259/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/dummy-load-resistor-50-ohm-15-watt-for-cb-amateur-marine-and-pmr-radio-pl259/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [NR-770S Short Dual Band 2M 70CM Mobile Ham Antenna 144-440MHz VHF UHF Aerial](https://cbradio.co.uk/product/nr-770s-short-dual-band-2m-70cm-mobile-ham-antenna-144-440mhz-vhf-uhf-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **NR-770S Dual Band Mobile Antenna 144/430MHz – Short 2m 70cm VHF UHF Ham Radio Aerial – PL259** **Compact Size – Serious Performance** The **NR-770S (or MRQ equivalent depending on stock)** is a **short, high-performance dual band antenna** designed for the **2m (144 MHz) and 70cm (430 MHz) amateur bands**. Perfect for users who want a **low-profile “covert” aerial** without sacrificing performance. --- ### ✅ **Why This Antenna Stands Out** ✔ **Dual Band Operation (2m & 70cm)** ✔ **Short & Compact Design (Only 43cm)** – ideal where height is restricted ✔ **Pre-Tuned – Ready to Use** ✔ **Open Centre Loading Coil** – efficient performance for its size ✔ **Excellent Signal Performance** despite compact build ✔ **PL259 Connector Fitted** – quick installation --- ### 📡 **Covert Yet Powerful** This antenna is designed to be **discreet**, making it ideal for: - Urban environments - Vehicles with height restrictions - Users who prefer a low-profile setup 👉 Don’t let the size fool you — **it performs exceptionally well for its length**. --- ### 🚗 **Perfect For** - Amateur (Ham) Radio Operators - Mobile Installations - Dual Band Radios (144/430 MHz) - Discreet / Covert Installations --- ### ⚙️ **Technical Specifications** - Model: **NR-770S / MRQ (depending on stock)** - Frequency Range: **144 / 430 MHz (2m / 70cm)** - Antenna Type: **5/8 Wave** - VSWR: **< 1.5:1** - Gain: **2.15 dBi** - Max Power: **100 Watts** - Length: **0.43 Metres (43cm)** - Connector: **PL259 (UHF Male)** --- ### ⚠️ **Stock Note** 📦 Supplied as **NR-770S or equivalent (MRQ525)** depending on current availability — both offer **similar performance and specifications**. --- ### ⚠️ **Avoid Cheap Alternatives** Low-quality antennas often: - Have poor tuning - Weak signal performance - Short lifespan 👉 This is a **proven, high-quality antenna designed for real use**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - Dual band radios - Magnetic & fixed mounts - Coax cable & connectors - SWR meters & accessories --- ### 🔥 **Order Today** **Compact, discreet, and powerful – the perfect mobile ham antenna.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/nr-770s-short-dual-band-2m-70cm-mobile-ham-antenna-144-440mhz-vhf-uhf-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/nr-770s-short-dual-band-2m-70cm-mobile-ham-antenna-144-440mhz-vhf-uhf-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/nr-770s-short-dual-band-2m-70cm-mobile-ham-antenna-144-440mhz-vhf-uhf-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/nr-770s-short-dual-band-2m-70cm-mobile-ham-antenna-144-440mhz-vhf-uhf-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20NR-770S%20Short%20Dual%20Band%202M%2070CM%20Mobile%20Ham%20Antenna%20144-440MHz%20VHF%20UHF%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fnr-770s-short-dual-band-2m-70cm-mobile-ham-antenna-144-440mhz-vhf-uhf-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/nr-770s-short-dual-band-2m-70cm-mobile-ham-antenna-144-440mhz-vhf-uhf-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/nr-770s-short-dual-band-2m-70cm-mobile-ham-antenna-144-440mhz-vhf-uhf-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/nr-770s-short-dual-band-2m-70cm-mobile-ham-antenna-144-440mhz-vhf-uhf-aerial/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Sirio mini snake 27 dial a match mobile cb radio aerial M6 Volvo Scania antenna](https://cbradio.co.uk/product/sirio-mini-snake-27-dial-a-match-mobile-cb-radio-aerial-m6-volvo-scania-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🐍🚛 **Sirio Mini Snake CB Antenna – M6 Volvo / Scania Fit – Compact 27MHz Truck Aerial** **Direct Fit • No Hassle • Compact High Performance** The **Sirio Mini Snake CB antenna** is designed to **fit directly onto factory M6 mounts** found on **Volvo and Scania trucks**, making installation **quick, clean, and hassle-free**. 👉 No need for aftermarket mounts or extra cabling. --- ### ✅ **Why Choose the Mini Snake** ✔ **Direct M6 Fit for Volvo / Scania** – plug & play ✔ **Compact Design (650mm)** – ideal for height restrictions ✔ **Tunable for Optimal Performance** ✔ **High Quality Sirio Construction** ✔ **Strong Signal for Its Size** --- ### 📡 **Performance Highlights** - Tunable across **26.5 – 27.4 MHz (CB band)** - **Low SWR (≤ 1.2 at resonance)** - Wide bandwidth (**≥ 1000 kHz / ~90 channels**) - **360° omnidirectional radiation** 👉 Excellent performance for a **compact antenna**. --- ### 🔧 **Easy Tuning System** ✔ Adjust via **metallic tuning ring (screw/unscrew)** ✔ Fine tune for best SWR and signal --- ### 🚛 **Perfect For** - Volvo Trucks (factory M6 mount) - Scania Trucks (factory M6 mount) - Drivers wanting a **compact, discreet aerial** - Users avoiding aftermarket installs --- ### ⚙️ **Technical Specifications** - Model: **Sirio Mini Snake 27** - Type: **Base Loaded Mobile Antenna** - Frequency Range: **26.5 – 27.4 MHz** - Impedance: **50 Ohm (Unbalanced)** - Polarisation: **Vertical** - Radiation Pattern: **360° Omnidirectional** - Bandwidth (SWR ≤ 2): **≥ 1000 kHz** - SWR at Resonance: **≤ 1.2** - Power Handling: **10W Continuous / 40W Short Burst** - Mount: **M6 Thread (Volvo / Scania OEM Fit)** - Height: **Approx. 650mm** - Weight: **Approx. 350g** - Materials: **Brass, Copper, Nylon, Stainless Steel** --- ### ⚠️ **Why Choose Sirio Over Alternatives** Compared to similar antennas (e.g. Solarcon Adjust-a-Match): ✔ Better build quality ✔ More durable materials ✔ More consistent performance 👉 A **premium upgrade for factory truck mounts**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - SWR meters & tuning tools - Coax cable & connectors - Alternative truck antennas --- ### 🔥 **Order Today** **Factory fit. Clean install. Reliable performance.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-mini-snake-27-dial-a-match-mobile-cb-radio-aerial-m6-volvo-scania-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-mini-snake-27-dial-a-match-mobile-cb-radio-aerial-m6-volvo-scania-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-mini-snake-27-dial-a-match-mobile-cb-radio-aerial-m6-volvo-scania-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-mini-snake-27-dial-a-match-mobile-cb-radio-aerial-m6-volvo-scania-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20mini%20snake%2027%20dial%20a%20match%20mobile%20cb%20radio%20aerial%20M6%20Volvo%20Scania%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-mini-snake-27-dial-a-match-mobile-cb-radio-aerial-m6-volvo-scania-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-mini-snake-27-dial-a-match-mobile-cb-radio-aerial-m6-volvo-scania-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-mini-snake-27-dial-a-match-mobile-cb-radio-aerial-m6-volvo-scania-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-mini-snake-27-dial-a-match-mobile-cb-radio-aerial-m6-volvo-scania-antenna/?share=telegram) - **Product categories:** Sirio cb Antennas --- ### [Co-Phasing Harness dual Antenna cable 9ft Twin Aerial coax Cable](https://cbradio.co.uk/product/co-phasing-harness-dual-antenna-cable-9ft-twin-aerial-coax-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **CB Co-Phasing Harness – Dual Aerial Kit – RG59 75 Ohm – Twin Antenna Lead** **Run 2 Aerials from 1 CB Radio – Improved Forward Range** This **Co-Phasing Harness** allows you to connect **two CB antennas to a single radio**, creating a **directional signal pattern** for improved performance along the road. 👉 Ideal for **trucks, HGVs, and long-distance driving setups**. --- ### ✅ **Key Features** ✔ **Dual Antenna Operation** – run 2 aerials from one radio ✔ **Equal Length RG59 Cable** – balanced performance ✔ **Maintains 50 Ohm Impedance to Radio** ✔ **Improved Forward & Rear Signal Range** ✔ **Pre-Made & Ready to Install** --- ### 📡 **How It Improves Performance** **Single Antenna:** - Circular signal pattern - Equal range in all directions **Dual Antennas (Co-Phased):** - Oval-shaped signal pattern - Increased range **front & rear (direction of travel)** - Slightly reduced range to the sides 👉 Perfect for **road use where communication is ahead or behind you**. --- ### 🚛 **Perfect For** - Trucks / HGVs - American-style dual aerial setups - Long-distance CB users - Highway driving - Professional drivers --- ### ⚙️ **Specifications** - Type: **Co-Phasing Harness (Dual Antenna Lead)** - Cable Type: **RG59 (75 Ohm)** - Configuration: **Equal Length Twin Leads** - System Impedance: **Matched to 50 Ohm Radio** --- ### 💡 **Why Use a Co-Phase Harness** ✔ Increased range in direction of travel ✔ Balanced antenna performance ✔ Classic dual aerial truck setup ✔ Improved signal efficiency --- ### ⚠️ **Important Notes** ❗ Requires **2 identical CB antennas** for best results ❗ Antennas must be **correctly spaced and mounted** ❗ Not ideal if side coverage is priority --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Matching CB aerials (pairs) - Mirror mounts & brackets - SWR meters & tuning tools - Coax cable & connectors --- ### 🔥 **Order Today** **Twin aerial setup. Forward range gain. Built for the road.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/co-phasing-harness-dual-antenna-cable-9ft-twin-aerial-coax-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/co-phasing-harness-dual-antenna-cable-9ft-twin-aerial-coax-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/co-phasing-harness-dual-antenna-cable-9ft-twin-aerial-coax-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/co-phasing-harness-dual-antenna-cable-9ft-twin-aerial-coax-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Co-Phasing%20Harness%20dual%20Antenna%20cable%209ft%20Twin%20Aerial%20coax%20Cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fco-phasing-harness-dual-antenna-cable-9ft-twin-aerial-coax-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/co-phasing-harness-dual-antenna-cable-9ft-twin-aerial-coax-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/co-phasing-harness-dual-antenna-cable-9ft-twin-aerial-coax-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/co-phasing-harness-dual-antenna-cable-9ft-twin-aerial-coax-cable/?share=telegram) - **Product categories:** CB radio Accessories --- ### [large hatchback or boot / trunk lip mount MB-400 mb400](https://cbradio.co.uk/product/large-hatchback-or-boot-trunk-lip-mount-mb-400-mb400/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚗📡 **MB-400 Heavy Duty Boot Mount – Trunk / Hatchback Antenna Mount – CB & Ham Radio** **Serious Strength • Professional Install • Built for Larger Antennas** The **MB-400 heavy duty boot mount** is designed for **secure, high-performance antenna installations**, making it ideal for both **amateur (ham) and CB radio users**. 👉 Built to handle **larger, heavier antennas with confidence**. --- ### 💪 **Heavy Duty Design** ✔ **Robust Metal Construction** – built for long-term use ✔ **Strong Clamp System** – secure mounting on boot / hatch lip ✔ **Designed for Larger Antennas** 👉 This is **not a lightweight mount** – it’s built properly. --- ### ✅ **Key Features** ✔ **Compatible with SO239 Cable Systems** *(sold separately)* ✔ **Stable Mounting Platform** ✔ **No Drilling Required** ✔ **Ideal for Temporary or Permanent Installations** --- ### 📡 **Compatible With Popular Antennas** **Amateur Radio Antennas:** - Diamond NR770R / NR770H - Diamond SG7500 - Diamond SG7900 - Yaesu ATAS-120 **CB Radio Antennas:** - Sirio Performer 3000 - Sirio Performer 4000 --- ### 🚗 **Perfect For** - Hatchbacks & estate cars - Saloon boot lids - Vehicles where roof drilling is not desired - Temporary or removable antenna setups --- ### ⚙️ **Specifications** - Model: **MB-400 Boot Mount** - Mount Type: **Trunk / Hatch Lip Mount** - Compatibility: **SO239 Cable Systems (Optional)** - Construction: **Heavy Duty Metal** --- ### ⚠️ **Important Notes** ❗ **Cable not included** – see our shop for SO239 cable kits ❗ Ensure mounting surface is strong and secure ❗ Best performance with proper grounding --- ### 💡 **Why Choose MB-400** Cheaper mounts: - Flex under load - Struggle with larger antennas - Have weak clamp systems 👉 The MB-400 is trusted for **reliability and strength**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - SO239 cable kits - Antennas & aerials - SWR meters & tuning tools - Coax cable & connectors --- ### 🔥 **Order Today** **Strong mount. Secure fit. Built for performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-hatchback-or-boot-trunk-lip-mount-mb-400-mb400/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-hatchback-or-boot-trunk-lip-mount-mb-400-mb400/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-hatchback-or-boot-trunk-lip-mount-mb-400-mb400/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-hatchback-or-boot-trunk-lip-mount-mb-400-mb400/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20large%20hatchback%20or%20boot%20%2F%20trunk%20lip%20mount%20MB-400%20mb400&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-hatchback-or-boot-trunk-lip-mount-mb-400-mb400%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-hatchback-or-boot-trunk-lip-mount-mb-400-mb400/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-hatchback-or-boot-trunk-lip-mount-mb-400-mb400/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-hatchback-or-boot-trunk-lip-mount-mb-400-mb400/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [MOONRAKER Skyscan MK II DX Magnetic Scanner Antenna 25 - 1300](https://cbradio.co.uk/product/moonraker-skyscan-mk-ii-dx-magnetic-scanner-antenna-25-1300/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔍 **Sky Scan MKII Scanner Antenna – 25–1300MHz Wideband – Magnetic Mount BNC** **Wideband Coverage • Compact • Plug & Play** The **Sky Scan MKII Antenna** is a **high-performance wideband scanner antenna**, designed to **enhance reception across a huge frequency range from 25 to 1300 MHz**. 👉 Ideal for **scanner users who want maximum coverage in one compact antenna**. --- ### 🔥 **Why Choose the Sky Scan MKII** ✔ **Ultra Wideband Reception (25–1300 MHz)** ✔ **4 Element Multi-Length Design** ✔ **Improved Signal Reception Across Bands** ✔ **Compact & Portable** ✔ **Magnetic Mount – Easy Installation** --- ### 📡 **How It Works** The Sky Scan MKII uses **4 different length antenna elements**, each tuned to a **specific frequency range**. 👉 This “nested antenna” design delivers: ✔ Better reception across multiple bands ✔ Improved signal pickup ✔ More consistent performance --- ### 🔍 **Perfect For Listening To** - Airband (aircraft) - Marine communications - Emergency services - Amateur radio - General scanning --- ### ⚙️ **Specifications** - Model: **Sky Scan MKII** - Frequency Coverage: **25 – 1300 MHz (Receive Only)** - Length: **64 cm** - Impedance: **50 Ohms** - Connector: **BNC** - Mount: **90 mm Magnetic Base** --- ### 🚗 **Easy Installation** ✔ Magnetic mount sticks securely to vehicle roof ✔ Quick setup – no drilling required ✔ Plug straight into scanner 👉 Perfect for **mobile or temporary setups**. --- ### 💡 **Why This Antenna Stands Out** ✔ One antenna covers multiple frequency ranges ✔ Compact but highly effective ✔ Ideal upgrade over stock scanner antennas 👉 A **must-have for serious scanner users**. --- ### ⚠️ **Important Notes** ❗ **Receive only antenna (not for transmitting)** ❗ Requires **BNC compatible scanner or adaptor** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Scanner radios - BNC adaptors - Coax cable & connectors - Mounting accessories --- ### 🔥 **Order Today** **More frequencies. Better reception. One antenna.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/moonraker-skyscan-mk-ii-dx-magnetic-scanner-antenna-25-1300/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/moonraker-skyscan-mk-ii-dx-magnetic-scanner-antenna-25-1300/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/moonraker-skyscan-mk-ii-dx-magnetic-scanner-antenna-25-1300/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/moonraker-skyscan-mk-ii-dx-magnetic-scanner-antenna-25-1300/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MOONRAKER%20Skyscan%20MK%20II%20DX%20Magnetic%20Scanner%20Antenna%2025%20-%201300&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmoonraker-skyscan-mk-ii-dx-magnetic-scanner-antenna-25-1300%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/moonraker-skyscan-mk-ii-dx-magnetic-scanner-antenna-25-1300/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/moonraker-skyscan-mk-ii-dx-magnetic-scanner-antenna-25-1300/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/moonraker-skyscan-mk-ii-dx-magnetic-scanner-antenna-25-1300/?share=telegram) - **Product categories:** Scanners and Aerials --- ### [sirio antenna Omega 27 n mobile cb radio aerial with cable and mount](https://cbradio.co.uk/product/sirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **Sirio Omega 27 CB & 10m Mobile Antenna – 27–28.5MHz Tunable – Adjustable Whip** **Compact • Adjustable • High Quality Performance** The **Sirio Omega 27 Antenna** is a **premium mobile CB & 10 metre antenna**, designed for **flexible installation and reliable performance** across the **27–28.5 MHz range**. 👉 Ideal for **CB users and amateur radio operators** wanting a **compact, adjustable aerial**. --- ### 🔥 **Why Choose the Omega 27** ✔ **Covers CB & 10m Bands (27–28.5 MHz)** ✔ **Fully Tunable for Best Performance** ✔ **180° Adjustable Tilt Mechanism** ✔ **Detachable Whip – Car Wash Friendly** ✔ **High Quality Sirio Construction** --- ### 📡 **Performance Highlights** - Frequency Range: **27 – 28.5 MHz** - Tunable for **optimal SWR** - Compact size with **excellent efficiency** 👉 A great balance of **size, flexibility, and performance**. --- ### 🚗 **Perfect For** - Cars, vans & trucks - Daily driving setups - CB radio users - 10 metre amateur band users - Low profile installations --- ### ⚙️ **Specifications** - Model: **Sirio Omega 27** - Type: **Mobile CB / 10m Antenna** - Frequency: **27 – 28.5 MHz (Tunable)** - Height: **Approx. 945 mm** - Weight: **Approx. 390g** - Whip: **17/7 PH Tapered Stainless Steel** - Mounting Hole: **Ø 12.5 mm** - Adjustment: **180° Inclination + Adjustable Whip** - Materials: **Brass / Copper / Nylon / Stainless Steel** --- ### 💡 **Key Benefits** ✔ Adjustable angle for different installations ✔ Detachable whip for convenience ✔ Durable, corrosion-resistant materials ✔ Trusted Sirio performance 👉 Built for **real-world mobile use**. --- ### ⚠️ **Important Notes** ❗ **PL259 connector NOT supplied** *(as per manufacturer)* ❗ Requires compatible mount and coax ❗ Tuning recommended after installation --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PL259 connectors - Mounts & brackets - Coax cable - SWR meters & tuning tools --- ### 🔥 **Order Today** **Compact size. Flexible fit. Trusted performance.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20sirio%20antenna%20Omega%2027%20n%20mobile%20cb%20radio%20aerial%20with%20cable%20and%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-antenna-omega-27-n-mobile-cb-radio-aerial-with-cable-and-mount/?share=telegram) - **Product categories:** CB Aerials with mount, Sirio cb Antennas --- ### [AV-201 SWR Power meter 1.8-160 MHz HF VHF VSWR](https://cbradio.co.uk/product/avair-av-201-swr-power-meter-1-8-160-mhz-hf-vhf-vswr/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📊 **AV-200 / AV-201 SWR & Power Meter – 1.8–160MHz HF VHF – 400W – PEP / AVG** **Accurate • High Power • Easy Read** This **SWR & Power Meter (AV-200 / AV-201)** is a **versatile and reliable tool** for measuring **SWR and power output across HF and VHF bands**. 👉 Supplied as **AV-200 or AV-201 depending on stock** *(both identical models)*. --- ### 🔥 **Why Choose This Meter** ✔ **Wide Frequency Coverage (1.8–160 MHz)** ✔ **High Power Handling up to 400W** ✔ **PEP & Average Power Measurement** ✔ **Large Clear Meter Display** ✔ **Accurate Readings Across Power Ranges** --- ### 📡 **Perfect For** - CB radio users - Amateur (Ham) radio operators - HF base station setups - VHF installations - Antenna tuning & diagnostics --- ### 📊 **Measurement Capabilities** ✔ **SWR (Standing Wave Ratio)** ✔ **Power Output Levels:** - 5W - 20W - 200W - 400W ✔ **PEP (Peak Envelope Power)** ✔ **Average Power Mode** --- ### ⚙️ **Specifications** - Model: **AV-200 / AV-201** *(identical)* - Frequency Range: **1.8 – 160 MHz** - Power Ranges: **5W / 20W / 200W / 400W** - Accuracy: - ±5% @ 5W - ±7.5% @ 20W - ±10% @ 200W - ±12.5% @ 400W - Meter Type: **Analogue (Large Display)** - Illumination: **13.8V DC Lamp** - Size: **155 x 63 x 103 mm** - Weight: **720g** --- ### 💡 **Why You Need an SWR Meter** ✔ Protects your radio from damage ✔ Ensures maximum signal performance ✔ Helps tune your antenna correctly 👉 A must-have tool for **any serious radio setup**. --- ### 🔧 **Key Benefits** ✔ Easy-to-read large meter ✔ Suitable for both mobile and base stations ✔ Reliable performance across multiple bands --- ### ⚠️ **Important Notes** ❗ Requires **patch leads (PL259 to PL259)** ❗ Must be installed inline between radio and antenna ❗ Model supplied depends on stock *(functionally identical)* --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Patch leads & coax cables - Antennas & mounts - CB & Ham radios - Power supplies --- ### 🔥 **Order Today** **Tune it right. Protect your gear. Maximise performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/avair-av-201-swr-power-meter-1-8-160-mhz-hf-vhf-vswr/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/avair-av-201-swr-power-meter-1-8-160-mhz-hf-vhf-vswr/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/avair-av-201-swr-power-meter-1-8-160-mhz-hf-vhf-vswr/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/avair-av-201-swr-power-meter-1-8-160-mhz-hf-vhf-vswr/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20AV-201%20SWR%20Power%20meter%201.8-160%20MHz%20HF%20VHF%20VSWR&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Favair-av-201-swr-power-meter-1-8-160-mhz-hf-vhf-vswr%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/avair-av-201-swr-power-meter-1-8-160-mhz-hf-vhf-vswr/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/avair-av-201-swr-power-meter-1-8-160-mhz-hf-vhf-vswr/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/avair-av-201-swr-power-meter-1-8-160-mhz-hf-vhf-vswr/?share=telegram) - **Product categories:** SWR meters --- ### [Dual Band 2M 70CM MRQ550 Amateur Mobile Aerial Antenna VHF UHF](https://cbradio.co.uk/product/dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **MRQ550 Dual Band Super Gainer Antenna – 2m / 70cm – 144/430MHz VHF UHF – PL259** **Compact • High Gain • Reliable Performance** The **MRQ550 Dual Band antenna** is a **high-performance mobile aerial** designed for **2m and 70cm amateur bands**, offering **excellent signal strength in a compact size**. 👉 Ideal for users who want **strong performance without a full-length antenna**. --- ### 🔥 **Why Choose the MRQ550** ✔ **Dual Band Operation (2m & 70cm)** ✔ **High Gain for Its Size** ✔ **Compact 1.06m Design** ✔ **Radial-Less Construction** ✔ **Low VSWR for Efficient Transmission** --- ### 📡 **Performance Highlights** - **144 MHz (2m band):** 3.5 dB gain - **430 MHz (70cm band):** 6.0 dB gain - **VSWR ≤ 1.5:1** 👉 Delivers **strong, reliable communication** for everyday use. --- ### 🚗 **Perfect For** - Amateur (Ham) radio users - Mobile installations (cars, vans, 4×4) - Daily commuting - Base-to-mobile communication --- ### ⚙️ **Specifications** - Model: **MRQ550** - Frequency: **144 / 430 MHz (2m / 70cm)** - Length: **1.06 Metres** - Weight: **330g** - Gain: - **3.5 dB @ 144 MHz** - **6.0 dB @ 430 MHz** - Power Handling: **150W (FM Total)** - Impedance: **50 Ohms** - VSWR: **≤ 1.5:1** - Connector: **PL259 (UHF Male)** - Design: - **1/2 Wave C-Load (2m)** - **2 x 5/8 Wave C-Load (70cm)** - **Radial-less** --- ### 💡 **Why This Antenna Stands Out** ✔ Better performance than shorter antennas ✔ Easier to manage than full-length models ✔ Ideal balance of **size vs gain** 👉 A **great all-rounder for mobile radio setups**. --- ### ⚠️ **Important Notes** ❗ Requires **SO239 mount/socket** ❗ Ensure good grounding for best performance ❗ Check height clearance before installation --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mounts & brackets - Coax cable & connectors - Dual band radios - SWR meters & tuning tools --- ### 🔥 **Order Today** **Compact size. Strong signal. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Dual%20Band%202M%2070CM%20MRQ550%20Amateur%20Mobile%20Aerial%20Antenna%20VHF%20UHF&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [SG-7900 Dual Band 2M 70CM super gainer Amateur Mobile Whip Antenna VHF UHF](https://cbradio.co.uk/product/sg-7900-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **SG-7900 Dual Band Super Gainer Antenna – 2m / 70cm – High Gain 144/430MHz – 1.58m PL259** **Maximum Performance • Long Range • Professional Grade** The **SG-7900 Dual Band Antenna** is a **high-performance dual band mobile whip**, designed for **serious amateur radio users** who demand **maximum range and signal strength**. 👉 Featuring a **double centre-loaded design**, this antenna delivers **exceptional gain on both 2m and 70cm bands**. --- ### 🔥 **Why Choose the SG-7900** ✔ **Very High Gain Output** ✔ **Double Centre Load Design** ✔ **Full-Length 1.58m Antenna for Maximum Range** ✔ **Radial-Less Design – Easy Installation** ✔ **Built for Strong TX & RX Performance** --- ### 📡 **Performance Highlights** - **144 MHz (2m band):** 5.0 dB gain - **430 MHz (70cm band):** 7.6 dB gain - **VSWR ≤ 1.5:1** for efficient transmission 👉 Ideal for **long-distance communication and weak signal areas**. --- ### 🚗 **Perfect For** - Amateur (Ham) radio operators - High-performance mobile setups - Long-distance communication - Base-to-mobile operation --- ### ⚙️ **Specifications** - Model: **SG-7900** - Frequency: **144 / 430 MHz (2m / 70cm)** - Length: **1.58 Metres** - Weight: **600g** - Gain: - **5.0 dB @ 144 MHz** - **7.6 dB @ 430 MHz** - Power Handling: **150W (FM Total)** - Impedance: **50 Ohms** - VSWR: **≤ 1.5:1** - Connector: **PL259 (UHF Male)** - Design: - **7/8 Wave Double C-Load (2m)** - **3 x 5/8 Wave C-Load (70cm)** - **Radial-less** --- ### 💡 **Why This Antenna Stands Out** Compared to standard dual band antennas: ✔ Higher gain = longer communication range ✔ Better performance in difficult conditions ✔ Ideal for experienced operators 👉 A **premium choice for serious radio enthusiasts**. --- ### ⚠️ **Important Notes** ❗ Requires **SO239 mount/socket** ❗ Height may not suit all vehicles – check clearance ❗ Best results with proper grounding --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Heavy duty mounts - Coax cable & connectors - Dual band radios - SWR meters & tuning tools --- ### 🔥 **Order Today** **High gain. Long range. No compromise.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sg-7900-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sg-7900-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sg-7900-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sg-7900-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SG-7900%20Dual%20Band%202M%2070CM%20super%20gainer%20Amateur%20Mobile%20Whip%20Antenna%20VHF%20UHF&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsg-7900-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sg-7900-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sg-7900-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sg-7900-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [ScanKing royal discone RX 20-2000MHz TX 6/2m 70/23cm amateur scanner aerial](https://cbradio.co.uk/product/scanking-royal-discone-rx-20-2000mhz-tx-6-2m-70-23cm-amateur-scanner-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **ScanKing Royal Discone 2000 Antenna** is a **high-performance wideband base antenna**, designed for **serious scanner users and amateur radio operators**. Offering **continuous receive coverage from 25–2000 MHz**, plus **transmit capability on multiple amateur bands**, this is a **true all-in-one aerial solution**. --- ## 📡 Ultra Wideband Coverage ✔ **RX: 25–2000 MHz** ✔ Covers: - Airband - Marine - VHF / UHF - Commercial & utility bands ✔ One antenna does it all --- ## 📶 Transmit Capability ✔ TX supported on: - **6m (50–52 MHz)** - **2m (144–146 MHz)** - **70cm (430–440 MHz)** - **23cm (1240–1325 MHz)** ✔ Max power: **50 Watts** --- ## 📈 Enhanced Performance ✔ Approx **4.5 dBi gain over standard discones** ✔ Improved receive sensitivity ✔ Better signal capture --- ## 🧲 Omni-Directional Design ✔ 360° coverage ✔ No need to rotate antenna ✔ Ideal for scanning multiple sources --- ## 💪 Strong Construction ✔ Stainless steel & aluminium build ✔ Corrosion resistant ✔ Built for outdoor use --- ## 📏 Full Size Base Antenna ✔ Height: **155cm** ✔ Radials: - 8 × 83cm - 8 × 29cm ✔ Optimised wideband design --- ## 🔩 Mounting Options ✔ Supplied with mounting kit & short pole ✔ Fits masts up to **50mm diameter** ❗ Mast not included --- ## 🔌 Professional Connection ✔ **N-Type connector** ✔ Lower loss vs standard PL259 ✔ Ideal for higher frequencies --- ## 📻 Ideal For Multiple Uses Perfect for: - Scanner enthusiasts - Airband monitoring - Amateur radio - General wideband listening --- ## Key Features - 25–2000 MHz receive range - Multi-band transmit capability - Omni-directional coverage - Stainless steel construction - N-type connection --- ## Why Choose the ScanKing Royal? ✔ Covers almost everything ✔ Stronger than standard discones ✔ Transmit + receive capability ✔ Built for long-term outdoor use --- ## Ideal For - Scanner hobbyists - Airshow listeners - Amateur radio operators - Base station setups --- ## Straight Talking If you want **one antenna that covers almost everything**, this is hard to beat. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/scanking-royal-discone-rx-20-2000mhz-tx-6-2m-70-23cm-amateur-scanner-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/scanking-royal-discone-rx-20-2000mhz-tx-6-2m-70-23cm-amateur-scanner-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/scanking-royal-discone-rx-20-2000mhz-tx-6-2m-70-23cm-amateur-scanner-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/scanking-royal-discone-rx-20-2000mhz-tx-6-2m-70-23cm-amateur-scanner-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20ScanKing%20royal%20discone%20RX%2020-2000MHz%20TX%206%2F2m%2070%2F23cm%20amateur%20scanner%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fscanking-royal-discone-rx-20-2000mhz-tx-6-2m-70-23cm-amateur-scanner-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/scanking-royal-discone-rx-20-2000mhz-tx-6-2m-70-23cm-amateur-scanner-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/scanking-royal-discone-rx-20-2000mhz-tx-6-2m-70-23cm-amateur-scanner-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/scanking-royal-discone-rx-20-2000mhz-tx-6-2m-70-23cm-amateur-scanner-aerial/?share=telegram) - **Product categories:** Scanners and Aerials --- ### [T Piece 3/8 Dipole Centre for 3/8 stud antenna universal for all radio bands](https://cbradio.co.uk/product/t-piece-3-8-dipole-centre-for-3-8-stud-antenna-universal-for-all-radio-bands/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3/8 Dipole Centre T-Piece (SO239)** is a **straight, heavy-duty dipole centre**, designed for **DIY antenna builds using 3/8 threaded elements**. Ideal for creating **custom dipoles, portable setups, or experimental antenna projects** across multiple bands. --- ## 🔩 Dual 3/8″ Antenna Connections ✔ **2 x 3/8 thread studs** ✔ Accepts most CB or ham antenna elements ✔ Perfect for building symmetrical dipoles --- ## 🔌 SO239 Feed Point ✔ Standard **SO239 connector** ✔ Connects directly to PL259 coax ✔ Easy integration into existing setups --- ## 📡 Universal Multi-Band Use ✔ Suitable for **various frequency bands** ✔ Works with different antenna lengths ✔ Ideal for experimentation and tuning --- ## ⚡ Power Handling ✔ Rated up to **500 Watts** ✔ Suitable for most base station setups --- ## 🛠 Perfect for DIY Builds Ideal for: - Dipole antennas - Portable field setups - Homebrew antenna projects - Testing and experimentation --- ## 💪 Solid Construction ✔ Strong metal body ✔ Reliable electrical connection ✔ Built for repeated use --- ## 🔧 Simple Setup - Attach antenna elements to 3/8 studs - Connect coax via SO239 - Mount and tune ✔ Quick and effective --- ## Key Features - Dipole centre T-piece - 2 x 3/8″ thread connections - SO239 coax connector - 500W power rating - Ideal for DIY antennas --- ## Why Choose This? ✔ Simple and versatile design ✔ Compatible with common antenna parts ✔ Great for experimentation ✔ Strong and reliable --- ## Ideal For - Amateur radio operators - CB antenna builders - Portable antenna setups - DIY enthusiasts --- ## Straight Talking If you like building your own antennas, this is a **must-have bit of kit**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/t-piece-3-8-dipole-centre-for-3-8-stud-antenna-universal-for-all-radio-bands/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/t-piece-3-8-dipole-centre-for-3-8-stud-antenna-universal-for-all-radio-bands/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/t-piece-3-8-dipole-centre-for-3-8-stud-antenna-universal-for-all-radio-bands/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/t-piece-3-8-dipole-centre-for-3-8-stud-antenna-universal-for-all-radio-bands/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20T%20Piece%203%2F8%20Dipole%20Centre%20for%203%2F8%20stud%20antenna%20universal%20for%20all%20radio%20bands&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ft-piece-3-8-dipole-centre-for-3-8-stud-antenna-universal-for-all-radio-bands%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/t-piece-3-8-dipole-centre-for-3-8-stud-antenna-universal-for-all-radio-bands/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/t-piece-3-8-dipole-centre-for-3-8-stud-antenna-universal-for-all-radio-bands/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/t-piece-3-8-dipole-centre-for-3-8-stud-antenna-universal-for-all-radio-bands/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [MRW-100 Super Gainer air band antenna best aerial for the Bearcat UBC-125XLT](https://cbradio.co.uk/product/mrw-100-super-gainer-air-band-antenna-best-aerial-for-the-bearcat-ubc-125xlt/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **MRW-100 Dual Band Antenna** is a **high-quality flexible replacement aerial** designed to **significantly outperform standard stock antennas** on handheld radios. Built in Japan and engineered for performance, this is a **serious upgrade for 2m and 70cm operation**. --- ## 📡 Dual Band Performance ✔ **144 MHz (2m)** ✔ **430 MHz (70cm)** ✔ Optimised for transmit and receive --- ## 📶 Improved Reception & Range - Better signal pickup than stock antennas - Clearer audio and stronger signals - Ideal for both analogue and digital use ✔ Noticeable upgrade --- ## 🔧 Flexible & Durable Design - 37cm flexible whip - Handles daily use and movement - Won’t snap like rigid antennas ✔ Practical for portable use --- ## 🔌 BNC Connector ✔ Quick connect/disconnect ✔ Secure fit ✔ Compatible with many handheld radios --- ## 📻 Wide Compatibility Ideal for handheld radios from: - Kenwood - Yaesu - Icom ✔ Fits most BNC-equipped handhelds --- ## 🇯🇵 Made in Japan ✔ High manufacturing quality ✔ Reliable performance ✔ Not a cheap copy --- ## 📡 Wide Receive Coverage - RX: **120 / 150 / 300 / 450 / 800 / 900 MHz** ✔ Great for scanner-style listening as well --- ## ⚡ Power Handling ✔ Up to **10W FM** ✔ Suitable for handheld radios --- ## 📏 Compact & Lightweight - Length: **37 cm** - Weight: **40g** ✔ Easy to carry and use --- ## Key Features - Dual band handheld antenna - Flexible whip design - BNC connector - 2m / 70cm coverage - Wide receive capability --- ## Technical Specifications - **Frequency:** 144 / 430 MHz - **Length:** 37 cm - **Weight:** 40g - **Impedance:** 50 Ohm - **Power:** 10W - **Connector:** BNC --- ## Why Choose the MRW-100? ✔ Better than stock antennas ✔ Flexible and durable ✔ High-quality Japanese build ✔ Great all-round performance --- ## Ideal For - Amateur radio handheld users - Scanner listeners - Airband and general monitoring - Portable radio setups --- ## Straight Talking If your handheld still has the stock aerial, this is one of the **easiest upgrades you can make**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mrw-100-super-gainer-air-band-antenna-best-aerial-for-the-bearcat-ubc-125xlt/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mrw-100-super-gainer-air-band-antenna-best-aerial-for-the-bearcat-ubc-125xlt/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mrw-100-super-gainer-air-band-antenna-best-aerial-for-the-bearcat-ubc-125xlt/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mrw-100-super-gainer-air-band-antenna-best-aerial-for-the-bearcat-ubc-125xlt/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MRW-100%20Super%20Gainer%20air%20band%20antenna%20best%20aerial%20for%20the%20Bearcat%20UBC-125XLT&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmrw-100-super-gainer-air-band-antenna-best-aerial-for-the-bearcat-ubc-125xlt%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mrw-100-super-gainer-air-band-antenna-best-aerial-for-the-bearcat-ubc-125xlt/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mrw-100-super-gainer-air-band-antenna-best-aerial-for-the-bearcat-ubc-125xlt/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mrw-100-super-gainer-air-band-antenna-best-aerial-for-the-bearcat-ubc-125xlt/?share=telegram) - **Product categories:** Amateur Radio Aerials, Scanners and Aerials --- ### [MRW-100 Dual Band Flexible Antenna 144 / 430MHz BNC](https://cbradio.co.uk/product/mrw-100-dual-band-flexible-antenna-144-430mhz-bnc-hand-held-aerial-2m-70cm/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **MRW-100 Dual Band Antenna** is a **high-quality flexible replacement aerial** designed to **significantly outperform standard stock antennas** on handheld radios. Built in Japan and engineered for performance, this is a **serious upgrade for 2m and 70cm operation**. --- ## 📡 Dual Band Performance ✔ **144 MHz (2m)** ✔ **430 MHz (70cm)** ✔ Optimised for transmit and receive --- ## 📶 Improved Reception & Range - Better signal pickup than stock antennas - Clearer audio and stronger signals - Ideal for both analogue and digital use ✔ Noticeable upgrade --- ## 🔧 Flexible & Durable Design - 37cm flexible whip - Handles daily use and movement - Won’t snap like rigid antennas ✔ Practical for portable use --- ## 🔌 BNC Connector ✔ Quick connect/disconnect ✔ Secure fit ✔ Compatible with many handheld radios --- ## 📻 Wide Compatibility Ideal for handheld radios from: - Kenwood - Yaesu - Icom ✔ Fits most BNC-equipped handhelds --- ## 🇯🇵 Made in Japan ✔ High manufacturing quality ✔ Reliable performance ✔ Not a cheap copy --- ## 📡 Wide Receive Coverage - RX: **120 / 150 / 300 / 450 / 800 / 900 MHz** ✔ Great for scanner-style listening as well --- ## ⚡ Power Handling ✔ Up to **10W FM** ✔ Suitable for handheld radios --- ## 📏 Compact & Lightweight - Length: **37 cm** - Weight: **40g** ✔ Easy to carry and use --- ## Key Features - Dual band handheld antenna - Flexible whip design - BNC connector - 2m / 70cm coverage - Wide receive capability --- ## Technical Specifications - **Frequency:** 144 / 430 MHz - **Length:** 37 cm - **Weight:** 40g - **Impedance:** 50 Ohm - **Power:** 10W - **Connector:** BNC --- ## Why Choose the MRW-100? ✔ Better than stock antennas ✔ Flexible and durable ✔ High-quality Japanese build ✔ Great all-round performance --- ## Ideal For - Amateur radio handheld users - Scanner listeners - Airband and general monitoring - Portable radio setups --- ## Straight Talking If your handheld still has the stock aerial, this is one of the **easiest upgrades you can make**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mrw-100-dual-band-flexible-antenna-144-430mhz-bnc-hand-held-aerial-2m-70cm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mrw-100-dual-band-flexible-antenna-144-430mhz-bnc-hand-held-aerial-2m-70cm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mrw-100-dual-band-flexible-antenna-144-430mhz-bnc-hand-held-aerial-2m-70cm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mrw-100-dual-band-flexible-antenna-144-430mhz-bnc-hand-held-aerial-2m-70cm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MRW-100%20Dual%20Band%20Flexible%20Antenna%20144%20%2F%20430MHz%20BNC&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmrw-100-dual-band-flexible-antenna-144-430mhz-bnc-hand-held-aerial-2m-70cm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mrw-100-dual-band-flexible-antenna-144-430mhz-bnc-hand-held-aerial-2m-70cm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mrw-100-dual-band-flexible-antenna-144-430mhz-bnc-hand-held-aerial-2m-70cm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mrw-100-dual-band-flexible-antenna-144-430mhz-bnc-hand-held-aerial-2m-70cm/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [LW-40 hf vhf 160 - 6m multi-band long wire](https://cbradio.co.uk/product/lw-40-hf-160-hf-vhf-160-6m-multi-band-ham-radio-long-wire-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **LW-40 HF-160 End Fed Antenna** is a **full-length multi-band HF antenna** covering **160m through to 6m**, making it one of the most versatile wire antennas available. With a **built-in 9:1 UNUN**, it can be fed directly with **50 Ohm coax**, giving you **simple installation with serious performance**. --- ## 🌍 Massive Frequency Coverage ✔ Covers **1.8 – 52 MHz** ✔ Bands: **160m to 6m (including WARC bands)** ✔ One antenna for nearly all HF operation --- ## 📡 True Multi-Band Operation - Works across all HF bands with an ATU - Ideal for general-purpose operation - Great for DX and local contacts ✔ Maximum flexibility --- ## 🔧 Built-In 9:1 UNUN - Matches impedance for **50 Ohm coax feed** - No need for complex feed systems - Cleaner and simpler installation ✔ Plug straight into your setup --- ## 📏 Full-Length Performance - Length: **41.7 metres** - Provides strong low-band performance - Ideal for serious HF users --- ## ⚡ High Power Handling ✔ **400W CW / 500W PEP** ✔ Suitable for most base station setups --- ## 🏡 Flexible Installation Options Install as: - Straight long wire - Inverted “V” - Sloper - Bent / dog-leg to fit space ✔ Works even in awkward gardens --- ## 🧵 Premium FlexWeave Copper Wire - Strong, flexible and durable - Easy to install and handle - Long-lasting outdoor performance ✔ Built to last --- ## 🔌 Standard SO239 Connection - Easy connection to PL259 coax - Compatible with most radio setups --- ## 🇬🇧 Made in Great Britain ✔ High-quality construction ✔ Reliable performance --- ## Key Features - End-fed long wire antenna - 160m to 6m coverage - Built-in 9:1 UNUN - 41.7m length - 500W PEP power handling --- ## Technical Specifications - **Frequency:** 1.8 – 52 MHz - **Length:** 41.7 metres - **Power:** 400W CW / 500W PEP - **Impedance:** 50 Ohms (via UNUN) - **Connector:** SO239 --- ## Why Choose the LW-40 HF-160? ✔ Covers almost every HF band ✔ Simple coax-fed design ✔ Flexible installation options ✔ Strong performance on low bands --- ## Ideal For - Amateur radio operators - Base station setups - Large garden installations - Multi-band HF users --- ## Straight Talking If you’ve got the space, this gives you **proper HF coverage from top to bottom**. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/lw-40-hf-160-hf-vhf-160-6m-multi-band-ham-radio-long-wire-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/lw-40-hf-160-hf-vhf-160-6m-multi-band-ham-radio-long-wire-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/lw-40-hf-160-hf-vhf-160-6m-multi-band-ham-radio-long-wire-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/lw-40-hf-160-hf-vhf-160-6m-multi-band-ham-radio-long-wire-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20LW-40%20hf%20vhf%20160%20-%206m%20multi-band%20long%20wire&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flw-40-hf-160-hf-vhf-160-6m-multi-band-ham-radio-long-wire-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/lw-40-hf-160-hf-vhf-160-6m-multi-band-ham-radio-long-wire-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/lw-40-hf-160-hf-vhf-160-6m-multi-band-ham-radio-long-wire-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/lw-40-hf-160-hf-vhf-160-6m-multi-band-ham-radio-long-wire-antenna/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Moonraker Minor plus CB Radio UK40 EU40](https://cbradio.co.uk/product/moonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://youtu.be/mbYWJ_lYK2I[/embed] **Content:** The **Moonraker Minor Plus CB Radio** is a **no-nonsense FM CB radio** offering **reliable performance with modern features**, all in a **traditional, easy-to-use design**. Perfect for users who want **simple operation without unnecessary complexity**. --- ## 📡 UK & EU Channel Coverage ✔ **UK40 + EU40 (80 channels via switch)** ✔ FM operation for clear communication ✔ Ideal for UK and European use --- ## 🔧 Simple & Practical Operation - Straightforward controls - Easy channel selection - No complicated menus ✔ Just switch on and use --- ## 🎤 Microphone Channel Control - **Up/Down channel buttons on mic** - Change channels without touching the radio - Safer and more convenient when driving --- ## 🔊 Auto Squelch Function ✔ Reduces background noise automatically ✔ Cleaner, quieter listening ✔ Manual adjustment also available --- ## 🚨 Quick Access Emergency Channel ✔ Instant access to **Channel 9** ✔ Fast switching in urgent situations --- ## ⚡ Dual Voltage 12V / 24V ✔ Suitable for **cars, vans and trucks** ✔ Flexible installation --- ## 💪 Reliable Performance - **4W output power** (legal CB limit) - PLL frequency stability - Strong and consistent signal --- ## 🔧 Complete Installation Kit ✔ Mounting trunnion bracket ✔ Thumb screws ✔ Microphone hanger ✔ Ready for installation --- ## Key Features - FM-only CB radio - 80 channels (UK/EU switchable) - Microphone channel control - Auto squelch - Dual voltage 12/24V --- ## Technical Specifications - **Frequency Range:** 25.615 – 28.305 MHz - **Channels:** 40 FM (switchable UK/EU = 80 total) - **Power Output:** 4W - **Voltage:** 13.8V DC (12/24V compatible) - **Size:** 115 x 150 x 38 mm - **Weight:** 0.8 kg --- ## Why Choose the Minor Plus? ✔ Simple and reliable ✔ Modern features without complexity ✔ Ideal for everyday CB use ✔ Great value for money --- ## Ideal For - Truck drivers - Vans and work vehicles - New CB users - Anyone wanting a simple setup --- ## Straight Talking If you want a **basic CB that just works without fuss**, this is exactly that. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/moonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/moonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/moonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/moonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Moonraker%20Minor%20plus%20CB%20Radio%20UK40%20EU40&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmoonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/moonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/moonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/moonraker-minor-plus-cb-radio-fm-only-uk40-eu40-80-channels-on-switch-12-24v/?share=telegram) - **Product categories:** Moonraker --- ### [MRQ-800 TRI-BAND 6/2/70 50 145 440 MHz](https://cbradio.co.uk/product/mrq-800-tri-band-6-2-70-mobile-amateur-radio-antenna-50-145-440-mhz/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **MRQ-800 Tri-Band Mobile Antenna** is a **high-performance mobile antenna** covering **6m, 2m and 70cm bands in one unit**. With its **double centre-loaded design and high gain**, it’s ideal for operators who want **maximum performance without swapping antennas**. --- ## 📡 True Tri-Band Coverage ✔ Covers **50 / 144 / 430 MHz** ✔ Bands: **6m / 2m / 70cm** ✔ One antenna for multiple bands --- ## ⚡ High Gain Performance - **6m:** 3.0 dBi - **2m:** 5.0 dBd - **70cm:** 7.5 dBd ✔ Strong transmit and receive performance --- ## 🔧 Advanced Coil Design - **Double centre-loaded construction** - Optimised for efficiency across bands - Improves signal strength and consistency ✔ Built for serious users --- ## 🚗 Full Size Mobile Antenna - Length: **150 cm** - Designed for maximum performance - Ideal for base and mobile use --- ## ⚡ High Power Handling ✔ Supports up to **200 Watts** ✔ Suitable for powerful mobile rigs --- ## 🔌 Standard PL259 Connection - **PL259 fitting** - Compatible with SO239 mounts and coax - Easy integration into existing setups --- ## 📶 Efficient Multi-Band Configuration - **6m:** 1/4 wave - **2m:** 6/8 wave - **70cm:** 3 × 5/8 wave ✔ Optimised for each band --- ## 🌧 Built for Outdoor Use ✔ Durable construction ✔ Weather-resistant design ✔ Reliable in daily use --- ## Key Features - Tri-band mobile antenna - Covers 6m / 2m / 70cm - High gain performance - Double centre-loaded design - 200W power handling --- ## Technical Specifications - **Frequency:** 50–52 / 144–146 / 430–440 MHz - **Length:** 150 cm - **VSWR:** ≤ 1.5:1 - **Power:** 200W - **Connector:** PL259 --- ## Why Choose the MRQ-800? ✔ One antenna for three bands ✔ High gain across all frequencies ✔ Strong, efficient design ✔ Ideal for serious mobile operators --- ## Ideal For - Amateur radio operators - Mobile and 4×4 setups - Multi-band users - Base station installs --- ## Straight Talking If you want **multi-band performance without swapping antennas**, this is the way to do it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mrq-800-tri-band-6-2-70-mobile-amateur-radio-antenna-50-145-440-mhz/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mrq-800-tri-band-6-2-70-mobile-amateur-radio-antenna-50-145-440-mhz/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mrq-800-tri-band-6-2-70-mobile-amateur-radio-antenna-50-145-440-mhz/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mrq-800-tri-band-6-2-70-mobile-amateur-radio-antenna-50-145-440-mhz/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MRQ-800%20TRI-BAND%206%2F2%2F70%2050%20145%20440%20MHz&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmrq-800-tri-band-6-2-70-mobile-amateur-radio-antenna-50-145-440-mhz%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mrq-800-tri-band-6-2-70-mobile-amateur-radio-antenna-50-145-440-mhz/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mrq-800-tri-band-6-2-70-mobile-amateur-radio-antenna-50-145-440-mhz/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mrq-800-tri-band-6-2-70-mobile-amateur-radio-antenna-50-145-440-mhz/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [MRQ575 Dual Band Amateur Aerial 2M 70CM](https://cbradio.co.uk/product/mrq575-dual-band-amateur-aerial-2m-70cm-mobile-whip-antenna-145-440-mhz/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **MRQ575 Dual Band Antenna** is a **high-performance mobile whip** designed for the **2m and 70cm amateur bands**. With its **open centre loading coil and stainless steel whip**, it delivers **strong performance and durability**, competing with far more expensive branded antennas. --- ## 📡 Dual Band Coverage ✔ **2m (144–146 MHz)** ✔ **70cm (430–440 MHz)** ✔ One antenna for both bands --- ## ⚡ High Gain Performance - **2m:** 3.0 dB - **70cm:** 5.5 dB ✔ Strong transmit and receive performance --- ## 🔧 Open Coil Design - Efficient **centre-loaded open coil** - Improved performance and signal clarity - Slim, modern design ✔ Better efficiency than basic whips --- ## 💪 Built to Last - Stainless steel whip - Strong and flexible construction - Designed for daily mobile use ✔ Durable and reliable --- ## ⚡ High Power Handling ✔ Rated up to **200 Watts** ✔ Suitable for powerful mobile radios --- ## 📏 Practical Size - Length: **0.97 metres (97cm)** - Excellent balance of performance and usability - Ideal for mobile installations --- ## 🔌 Standard PL259 Connection - **PL259 plug fitted** - Compatible with SO239 mounts and coax - Easy to install --- ## 📶 Efficient 5/8 Wave Design ✔ Optimised for mobile performance ✔ Good radiation pattern for range --- ## Key Features - Dual band mobile antenna - 2m / 70cm coverage - Open coil design - High gain performance - 200W power handling --- ## Technical Specifications - **Frequency:** 144 / 430 MHz - **Length:** 97 cm - **VSWR:** < 1.5:1 - **Power:** 200W - **Gain:** 3.0 / 5.5 dB - **Connector:** PL259 --- ## Why Choose the MRQ575? ✔ Excellent value for performance ✔ Comparable to premium brands ✔ Durable and well-built ✔ Ideal for everyday use --- ## Ideal For - Amateur radio operators - Mobile installations - 4×4 and vehicle setups - Base station use --- ## Straight Talking This antenna gives you **premium-level performance without the premium price tag**. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mrq575-dual-band-amateur-aerial-2m-70cm-mobile-whip-antenna-145-440-mhz/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mrq575-dual-band-amateur-aerial-2m-70cm-mobile-whip-antenna-145-440-mhz/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mrq575-dual-band-amateur-aerial-2m-70cm-mobile-whip-antenna-145-440-mhz/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mrq575-dual-band-amateur-aerial-2m-70cm-mobile-whip-antenna-145-440-mhz/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MRQ575%20Dual%20Band%20Amateur%20Aerial%202M%2070CM&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmrq575-dual-band-amateur-aerial-2m-70cm-mobile-whip-antenna-145-440-mhz%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mrq575-dual-band-amateur-aerial-2m-70cm-mobile-whip-antenna-145-440-mhz/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mrq575-dual-band-amateur-aerial-2m-70cm-mobile-whip-antenna-145-440-mhz/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mrq575-dual-band-amateur-aerial-2m-70cm-mobile-whip-antenna-145-440-mhz/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [3 pin Fused CB Power Lead Cable Uniden Radios](https://cbradio.co.uk/product/3-pin-cb-fused-power-lead-cable-audioline-uniden-realistic-midland-am-danita/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3 Pin Fused CB Power Lead** is a **heavy-duty DC power cable** designed to provide a **safe and reliable power connection** for a wide range of CB radios. Built with a **moulded 3-pin connector and inline fuse protection**, this is the **proper way to power your radio**. --- ## 🔌 Reliable Power Connection ✔ 3-pin moulded plug ✔ Secure fit for compatible radios ✔ Stable power delivery --- ## ⚡ Built-In Fuse Protection - Inline fuse holder included - **2 Amp fuse fitted** - Protects radio from electrical faults ✔ Essential safety feature --- ## 💪 Heavy Duty Construction - **20 gauge cable** - Strong and durable - Designed for long-term use ✔ Not a cheap flimsy lead --- ## 📡 Compatible with Popular Radios Fits many models including: - Superstar 3900 - Superstar 6900 - President CB Radios - Audioline - Cobra Electronics - Midland Radio - Uniden ✔ Suitable for many 3-pin CB radios --- ## 🔧 Easy Installation - Plug into radio - Connect to power supply - Ready to use ✔ Simple and hassle-free --- ## 🚗 Ideal for Mobile & Base Use ✔ Car and van installs ✔ Base station setups ✔ Replacement or upgrade lead --- ## Key Features - 3 pin CB power lead - Heavy duty 20 gauge cable - Inline fuse holder - 2 amp fuse included - Moulded connector --- ## Why Choose This Lead? ✔ Safe, fused power connection ✔ Strong and durable ✔ Compatible with many radios ✔ Reliable everyday use --- ## Ideal For - CB radio users - Replacement power leads - Vehicle installations - Base station setups --- ## Straight Talking Get the power lead right — because a cheap one is the first thing to fail. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-pin-cb-fused-power-lead-cable-audioline-uniden-realistic-midland-am-danita/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-pin-cb-fused-power-lead-cable-audioline-uniden-realistic-midland-am-danita/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-pin-cb-fused-power-lead-cable-audioline-uniden-realistic-midland-am-danita/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-pin-cb-fused-power-lead-cable-audioline-uniden-realistic-midland-am-danita/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%20pin%20Fused%20CB%20Power%20Lead%20Cable%20Uniden%20Radios&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-pin-cb-fused-power-lead-cable-audioline-uniden-realistic-midland-am-danita%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-pin-cb-fused-power-lead-cable-audioline-uniden-realistic-midland-am-danita/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-pin-cb-fused-power-lead-cable-audioline-uniden-realistic-midland-am-danita/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-pin-cb-fused-power-lead-cable-audioline-uniden-realistic-midland-am-danita/?share=telegram) - **Product categories:** CB Radio Power Leads --- ### [Extension Speaker 5W with filter](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Moonraker PMR-712 Extension Speaker** (also known as CRT MS120 E) is a **premium external speaker** designed to deliver **clearer, more controlled audio** for CB and radio communication systems. With a **built-in noise filter and 8dB attenuation switch**, this speaker gives you **greater control over sound quality and volume** — especially useful in noisy environments. --- ## 🔊 Enhanced Audio Control ✔ **5W output (8 Ohm)** ✔ Clear, crisp voice reproduction ✔ Designed for communication clarity --- ## 🎚 Built-In 8dB Attenuator - Reduces audio level when needed - Prevents distortion at higher volumes - Ideal for powerful radios ✔ Better control over loud audio --- ## 🔇 Switchable Noise Filter - Helps reduce background noise - Improves speech clarity - Perfect for mobile environments ✔ Cleaner, easier listening --- ## 🔌 Universal 3.5mm Connection - Standard **3.5mm jack plug** - Compatible with most CB and radio equipment ✔ Plug-and-play setup --- ## 🚗 Ideal for Vehicle Installs - Perfect for radios mounted out of sight - Improves audio direction and clarity - Compact enough for dashboard mounting --- ## 📏 Compact & Practical Design - Size: **110 x 40 x 95 mm** - Weight: **0.32 kg** - Cable length: **2 metres** ✔ Easy to position where you need it --- ## ⚡ No External Power Needed ✔ Powered directly from your radio ✔ No batteries or PSU required --- ## 📡 Wide Compatibility Suitable for: - CB radios - Ham / amateur radios - PMR / two-way radios - Mobile and base station setups --- ## Key Features - 5W external speaker - 8 Ohm impedance - 8dB attenuation switch - Built-in noise filter - 3.5mm jack connection - Compact design --- ## Why Choose This Speaker? ✔ More control than standard speakers ✔ Cleaner, clearer audio ✔ Ideal for noisy environments ✔ Simple upgrade with big impact --- ## Ideal For - Truck drivers - 4×4 and off-road users - Base station setups - Users with powerful radios --- ## Straight Talking If a basic speaker isn’t cutting it, this gives you **proper control over volume and clarity — especially when things get noisy**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Extension%20Speaker%205W%20with%20filter&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-extension-speaker-8-ohms-5w-with-filter-and-8-db-attenuation-switch/?share=telegram) - **Product categories:** CB Radio Extension Speakers --- ### [CB Aerial Mag Mount Antenna PNI ML70](https://cbradio.co.uk/product/cb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Compact 70cm CB Mag Mount Antenna** is a **high-quality, low-profile antenna** designed for drivers who want **solid performance without a large aerial**. Built with a **strong magnetic base and stainless steel whip**, this antenna offers **reliability, ease of use and great value**. --- ## 🚗 Compact & Practical ✔ Only **70cm in length** ✔ Discreet and tidy on the vehicle ✔ Ideal for everyday driving --- ## 💪 Strong Magnetic Mount - Large **145mm magnet base** - Excellent grip at speed - Stable and secure installation ✔ No worries on motorways --- ## 📡 Reliable Performance - Frequency: **26–28 MHz** - **SWR < 1.2:1** - Efficient transmission and reception ✔ Great balance of size vs performance --- ## ⚡ Solid Power Handling - **200W continuous power** - Suitable for standard CB setups --- ## 🔌 Ready to Install - **4m RG58 coax cable** included - Pre-fitted **PL259 connector** - Plug-and-play setup --- ## 🛠 Quality Construction - Stainless steel whip - Durable build quality - Comparable to well-known Italian designs ✔ Built to last --- ## Key Features - Compact CB antenna - Magnetic mount (145mm) - 70cm length - RG58 cable (4m) - PL259 connector - Stainless steel construction --- ## Technical Specifications - **Frequency:** 26–28 MHz - **SWR:** < 1.2:1 - **Power Handling:** 200W - **Impedance:** 50 Ohm - **Polarisation:** Vertical - **Length:** 70 cm - **Cable:** RG58 (4m) - **Connector:** PL259 --- ## Why Choose This Antenna? ✔ Compact and discreet ✔ Strong magnetic base ✔ Easy to install ✔ Reliable everyday performance --- ## Ideal For - Cars and vans - Daily drivers - New CB users - Users wanting a subtle setup --- ## Straight Talking If you want a **simple, good-quality CB antenna that just works without sticking out like a flagpole**, this is a solid choice. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Aerial%20Mag%20Mount%20Antenna%20PNI%20ML70&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-aerial-mag-mount-antenna-145mm-pni-ml70-high-quality-low-profile/?share=telegram) - **Product categories:** CB Aerials with mount, PNI CB Antennas --- ### [USB Programming cable for various models](https://cbradio.co.uk/product/usb-programming-cable-for-dx-10-cre-8900-at6666-stryker-955hpc-alinco-dr-135dx/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **ERW-10 USB Programming Cable** is a dedicated interface lead designed for **programming compatible CB and 10m radios via PC**. Easily customise frequencies, channels, settings and advanced functions using downloadable software. --- ## 💻 Simple Radio Programming ✔ Connect your radio directly to your PC ✔ Adjust frequencies, channels and settings ✔ Unlock advanced features and configuration --- ## 🔌 Wide Radio Compatibility Compatible with: - CRE 8900 - AT6666 - Stryker 955HPC - Alinco DR-135DX / DX-10 - CRT SS6900 NV - CRT SS7900 - CRT SS9900 ✔ One cable for multiple popular radios --- ## ⚠️ Important Note This is a **dedicated programming cable** — it may look like a standard USB lead, but it is **NOT interchangeable**. ✔ Always use the correct cable to avoid damage --- ## 📥 Software Support - Programming software available for download - Enables full radio customisation - Easy setup with compatible systems --- ## ⚙️ Designed for Reliability - Stable USB interface - Secure connection to radio - Built for repeated programming use --- ## Key Features - USB programming interface - Multi-radio compatibility - Easy PC connection - Supports advanced configuration - Reliable and stable operation --- ## Why Choose the ERW-10? ✔ Essential tool for advanced users ✔ Unlock full radio potential ✔ Works with multiple popular models ✔ Simple plug-and-program setup --- ## Ideal For - Amateur radio users - Export / 10m radio owners - Advanced CB setups - Custom frequency programming --- ## Straight Talking If you’ve got one of these radios, this cable is **pretty much essential** to get the most out of it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/usb-programming-cable-for-dx-10-cre-8900-at6666-stryker-955hpc-alinco-dr-135dx/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/usb-programming-cable-for-dx-10-cre-8900-at6666-stryker-955hpc-alinco-dr-135dx/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/usb-programming-cable-for-dx-10-cre-8900-at6666-stryker-955hpc-alinco-dr-135dx/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/usb-programming-cable-for-dx-10-cre-8900-at6666-stryker-955hpc-alinco-dr-135dx/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20USB%20Programming%20cable%20for%20various%20models&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fusb-programming-cable-for-dx-10-cre-8900-at6666-stryker-955hpc-alinco-dr-135dx%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/usb-programming-cable-for-dx-10-cre-8900-at6666-stryker-955hpc-alinco-dr-135dx/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/usb-programming-cable-for-dx-10-cre-8900-at6666-stryker-955hpc-alinco-dr-135dx/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/usb-programming-cable-for-dx-10-cre-8900-at6666-stryker-955hpc-alinco-dr-135dx/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [V shape antenna dipole centre 3/8 to so239](https://cbradio.co.uk/product/v-shape-dipole-centre-3-8-to-so239-connector-cb-ham-radio-antenna-project/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **V-Shaped Dipole Centre 3/8 to SO239** is a robust and practical solution for building **custom dipole or longwire antenna systems**. Designed with **dual 3/8″ fittings and an SO239 connector**, it provides a solid and reliable connection point for your antenna elements and coax feed. --- ## 🔧 Built for DIY Antenna Projects ✔ Ideal for **dipole and V-shaped antenna builds** ✔ Perfect for **CB and amateur radio setups** ✔ Strong central mounting point for wire or whip elements --- ## 📡 V-Shaped Design Advantage - Supports **V configuration dipole antennas** - Helps optimise radiation pattern - Improves practical installation flexibility --- ## ⚙️ Versatile Connection Options - **2 × 3/8″ threaded fittings** for antenna elements - **SO239 (UHF female)** connector for coax feedline - Compatible with standard CB / ham antenna components --- ## ⚡ Reliable Power Handling - Rated up to **500 Watts** - Suitable for most CB and amateur radio applications --- ## 📏 Compact & Practical - Strong, simple design - Easy to install and integrate into builds - Ideal for portable or fixed installations --- ## Key Features - V-shaped dipole centre - 2 × 3/8″ antenna fittings - SO239 coax connector - 500W power handling - Suitable for CB & amateur radio --- ## Why Choose This Dipole Centre? ✔ Simple and effective antenna solution ✔ Strong and reliable connections ✔ Compatible with standard components ✔ Ideal for custom builds --- ## Ideal For - DIY antenna builders - CB base stations - Amateur radio setups - Portable field antennas --- ## Straight Talking If you’re building your own antenna, this gives you a **solid, no-nonsense centre point that just works**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/v-shape-dipole-centre-3-8-to-so239-connector-cb-ham-radio-antenna-project/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/v-shape-dipole-centre-3-8-to-so239-connector-cb-ham-radio-antenna-project/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/v-shape-dipole-centre-3-8-to-so239-connector-cb-ham-radio-antenna-project/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/v-shape-dipole-centre-3-8-to-so239-connector-cb-ham-radio-antenna-project/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20V%20shape%20antenna%20dipole%20centre%203%2F8%20to%20so239&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fv-shape-dipole-centre-3-8-to-so239-connector-cb-ham-radio-antenna-project%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/v-shape-dipole-centre-3-8-to-so239-connector-cb-ham-radio-antenna-project/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/v-shape-dipole-centre-3-8-to-so239-connector-cb-ham-radio-antenna-project/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/v-shape-dipole-centre-3-8-to-so239-connector-cb-ham-radio-antenna-project/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [PNI PMR R40 Pro portable PMR radios set pair](https://cbradio.co.uk/product/pni-pmr-r40-pro-portable-pmr-radios-set-of-2-pieces/) **Published:** September 18, 2023 **Author:** Jan **Content:** The **PNI PMR R40 Pro Radio** is a compact and reliable **PMR446 handheld radio**, designed for clear communication, ease of use and hands-free operation. Supplied with headset, battery and charger, it’s ready to use straight out of the box — ideal for work, outdoor use and everyday communication. --- ## 🎧 Hands-Free Operation ✔ Includes **headset with 2-pin (Kenwood-type) connector** ✔ Built-in **VOX function** for hands-free use ✔ Ideal for active environments and multitasking Stay connected without needing to press PTT. --- ## 📡 Clear & Secure Communication - **8 PMR channels + 8 pre-programmed channels** - Privacy codes for secure conversations - Automatic squelch for clean audio Reliable communication when it matters. --- ## 🔧 Practical Features - **VOX (hands-free transmit)** - **TOT (Time Out Timer)** – prevents over-transmission - Channel monitoring function - Key functions preset for easy use --- ## 🔋 Long-Lasting Battery - **1200mAh Li-Ion battery (included)** - Built-in battery-saving system - Extended operating time (up to 50% more efficient use) --- ## 🔦 Built-In LED Light - Handy **integrated torch** - Useful for emergencies or low-light conditions - Ideal for outdoor and site use --- ## 💻 Programmable (Optional) - Customise settings via optional programming kit - Compatible with **PNI PSR230 cable & software** *(sold separately)* --- ## What’s in the Box? - PNI PMR R40 Pro radio - Headset (2-pin Kenwood type) - Li-Ion battery (1200mAh) - Desktop charger - User manual --- ## Ideal For - Work sites and warehouses - Outdoor activities - Events and security - General communication --- ## Why Choose the R40 Pro? ✔ Ready-to-use complete kit ✔ Hands-free operation included ✔ Reliable, simple communication ✔ Practical features for real-world use --- ## Straight Talking If you want a **simple, reliable handheld radio with hands-free capability straight out of the box**, this is a solid choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-pmr-r40-pro-portable-pmr-radios-set-of-2-pieces/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-pmr-r40-pro-portable-pmr-radios-set-of-2-pieces/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-pmr-r40-pro-portable-pmr-radios-set-of-2-pieces/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-pmr-r40-pro-portable-pmr-radios-set-of-2-pieces/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20PMR%20R40%20Pro%20portable%20PMR%20radios%20set%20pair&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-pmr-r40-pro-portable-pmr-radios-set-of-2-pieces%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-pmr-r40-pro-portable-pmr-radios-set-of-2-pieces/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-pmr-r40-pro-portable-pmr-radios-set-of-2-pieces/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-pmr-r40-pro-portable-pmr-radios-set-of-2-pieces/?share=telegram) - **Product categories:** HandHelds --- ### [Speaker Mic Microphone DM-300 for Kenwood](https://cbradio.co.uk/product/speaker-mic-microphone-dm-300-for-kenwood-tk-series-pmr-446-or-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **DM-300 Speaker Microphone** is a **high-quality remote speaker mic** designed for radios using the **Kenwood 2-pin connector**. Built for reliability, it allows you to **clip the mic to your shoulder or jacket** and communicate clearly without needing to hold your radio. --- ## 🎤 Clear Audio & Hands-Free Use ✔ Built-in **speaker and microphone** ✔ Push-To-Talk (PTT) button ✔ Clear audio in both transmit and receive --- ## 🔌 Kenwood 2-Pin Compatibility - Standard **Kenwood-style 2-pin connector** - Works with many **PMR446 and amateur radios** - Secure and reliable connection --- ## 💪 Built for Tough Environments - Durable construction - Strong clip for shoulder or chest mounting - Designed for daily professional use --- ## 🚨 Ideal for Professional Applications Perfect for: - Emergency services - Security teams - Event staff - 4×4 response groups - Amateur radio users --- ## 🔊 Practical & Convenient - Keeps your radio on your belt - Easy access to PTT - Improves mobility and response time --- ## Key Features - Speaker microphone with PTT - Kenwood 2-pin connector - Hands-free communication - Durable and reliable - Strong clothing clip --- ## Why Choose the DM-300? ✔ Simple and effective ✔ Compatible with many radios ✔ Built for real-world use ✔ Great value upgrade --- ## Ideal For - PMR446 radios - Amateur radio handhelds - Security and event staff - Outdoor and response teams --- ## Straight Talking If you use a handheld radio regularly, this makes life **a lot easier and more professional**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/speaker-mic-microphone-dm-300-for-kenwood-tk-series-pmr-446-or-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/speaker-mic-microphone-dm-300-for-kenwood-tk-series-pmr-446-or-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/speaker-mic-microphone-dm-300-for-kenwood-tk-series-pmr-446-or-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/speaker-mic-microphone-dm-300-for-kenwood-tk-series-pmr-446-or-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Speaker%20Mic%20Microphone%20DM-300%20for%20Kenwood&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fspeaker-mic-microphone-dm-300-for-kenwood-tk-series-pmr-446-or-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/speaker-mic-microphone-dm-300-for-kenwood-tk-series-pmr-446-or-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/speaker-mic-microphone-dm-300-for-kenwood-tk-series-pmr-446-or-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/speaker-mic-microphone-dm-300-for-kenwood-tk-series-pmr-446-or-ham-radio/?share=telegram) - **Product categories:** Speaker Microphones --- ### [SO239 boot mount with 5m cable](https://cbradio.co.uk/product/so239-boot-mount-with-5m-cable-for-cb-aerial-or-ham-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Boot Mount CB Antenna Kit (SO239 with 5m RG58)** is a **complete mounting solution** for installing a CB or amateur antenna on your vehicle without drilling. Supplied with **5 metres of high-quality RG58 coax**, this mount makes installation quick, clean and reliable. --- ## 🚗 Easy Boot / Trunk Installation ✔ Mounts securely to the **boot edge (lip mount)** ✔ No drilling required ✔ Ideal for cars and hatchbacks --- ## 📡 Wide Antenna Compatibility Suitable for: - CB antennas (e.g. Sirio types) - Amateur (ham) antennas - Models like MRQ 550 / MRQ 575 ✔ Standard **SO239 socket fitting** --- ## 🔌 Complete Cable Setup Included - **5 metres RG58 coax cable** - SO239 socket (antenna side) - **PL259 plug (radio side)** ✔ Ready to connect straight out of the box --- ## ⚙️ Quality Construction - Durable mount design - Flexible, reliable RG58 cable - Secure signal connection --- ## 📏 Practical Cable Length - 5 metres ideal for routing through vehicle - Allows flexible antenna positioning - Clean installation --- ## Key Features - Boot / trunk lip mount - SO239 antenna socket - 5m RG58 coax cable - PL259 connector - No drilling installation - Suitable for CB & ham antennas --- ## Why Choose This Mount? ✔ Simple and clean install ✔ Complete kit – no extras needed ✔ Compatible with most antennas ✔ Great for mobile setups --- ## Ideal For - Car CB installations - Amateur radio mobile setups - Users avoiding drilling holes - Flexible antenna positioning --- ## Straight Talking If you want a **proper antenna mount without drilling your car**, this is a solid, ready-to-go solution. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/so239-boot-mount-with-5m-cable-for-cb-aerial-or-ham-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/so239-boot-mount-with-5m-cable-for-cb-aerial-or-ham-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/so239-boot-mount-with-5m-cable-for-cb-aerial-or-ham-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/so239-boot-mount-with-5m-cable-for-cb-aerial-or-ham-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SO239%20boot%20mount%20with%205m%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fso239-boot-mount-with-5m-cable-for-cb-aerial-or-ham-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/so239-boot-mount-with-5m-cable-for-cb-aerial-or-ham-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/so239-boot-mount-with-5m-cable-for-cb-aerial-or-ham-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/so239-boot-mount-with-5m-cable-for-cb-aerial-or-ham-antenna/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [Midland M-ZERO CB Radio AM/FM EU Poland only](https://cbradio.co.uk/product/cb-radio-midland-m-zero-plus-am-fm-eu-poland-only/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=qWxbV9m4a20[/embed] **Content:** The **Midland M Zero Plus CB Radio** is an **ultra-compact, easy-to-use CB radio** designed for drivers who want **simple, reliable communication at a great price**. With its small size, straightforward controls and quick installation, it’s the **perfect entry-level CB radio**. --- ## ⚠️ Important (UK Use) This model operates on **CEPT / European frequencies only** ❌ **No UK40 channels** ✔ Suitable for EU use or export applications --- ## 🚗 Ultra Compact Design ✔ Extremely small footprint ✔ Fits easily into tight dashboards ✔ Ideal for modern vehicles --- ## 🔧 Quick & Easy Installation - Supplied with **cigarette lighter plug** - No hard wiring required - Mounting bracket included ✔ Plug in and go --- ## 📡 Reliable CB Performance - **40 channels AM/FM** - Output power: **4W (legal limit)** - Frequency bands: - EU (26.965 – 27.405 MHz) - Poland (26.960 – 27.400 MHz) --- ## 🎛 Simple Controls - Channel UP/DOWN buttons (fast scroll) - RF Gain adjustment - Manual squelch control - Clear channel display ✔ Designed for ease of use --- ## 🚨 Emergency Channel Access - Dedicated **CH/EMG button** - Instant access to emergency or priority channel - User-configurable priority channel --- ## ⚙️ Modern Build Quality - Built using **SMD technology** - Reliable and efficient electronics - Lightweight and durable --- ## Key Features - Ultra compact CB radio - 40 channels AM/FM - 4W output power - CEPT / EU bands - Cigarette lighter plug - RF Gain & squelch - Emergency channel access --- ## Technical Specifications - **Frequency Range:** 26.965 – 27.405 MHz - **Channels:** 40 - **Modes:** AM / FM - **Power Output:** 4W - **Dimensions:** 110 x 45 x 140 mm - **Weight:** 665g --- ## What’s in the Box? - Midland M Zero Plus CB radio - 4-pin microphone - Mounting bracket - Fixing screws - Quick guide - Cigarette lighter power lead --- ## Why Choose the M Zero Plus? ✔ Simple and reliable ✔ Compact and easy to install ✔ Great value entry-level radio ✔ Perfect for basic CB use --- ## Ideal For - Beginners - Budget setups - Cars with limited space - EU travel (CEPT bands) --- ## Straight Talking If you just want a **basic CB radio that’s small, cheap and does the job**, this is exactly that. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-midland-m-zero-plus-am-fm-eu-poland-only/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-midland-m-zero-plus-am-fm-eu-poland-only/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-midland-m-zero-plus-am-fm-eu-poland-only/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-midland-m-zero-plus-am-fm-eu-poland-only/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Midland%20M-ZERO%20CB%20Radio%20AM%2FFM%20EU%20Poland%20only&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-midland-m-zero-plus-am-fm-eu-poland-only%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-midland-m-zero-plus-am-fm-eu-poland-only/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-midland-m-zero-plus-am-fm-eu-poland-only/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-midland-m-zero-plus-am-fm-eu-poland-only/?share=telegram) - **Product categories:** Midland --- ### [GPS Navigation System PNI L810 7 inch screen](https://cbradio.co.uk/product/gps-navigation-system-pni-l810-7-inch-screen-800-mhz-256mb-ddr-8gb-internal-m/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PNI L810 Sat Nav** is a **large-screen, easy-to-use GPS navigation system** with **full European maps and lifetime updates**. Designed for drivers who want **reliable navigation without relying on mobile signal**, it delivers clear directions, fast route calculation and multimedia functionality. --- ## 🗺 Full Europe Maps with Lifetime Updates ✔ Preloaded **full European mapping** ✔ **Lifetime map updates included** ✔ Powered by **Mireo “Don’t Panic” navigation software** ✔ Accurate routing with points of interest (POIs): - Fuel stations - Restaurants - Services and more --- ## 📺 Large 7” Touchscreen Display - Bright **7-inch display** - Responsive and precise touch control - Stylus included for accurate navigation ✔ Easy to read while driving --- ## ⚡ Fast & Reliable Performance - **800 MHz processor (MSB 2531)** - 256MB RAM - Quick GPS positioning - Fast route calculation --- ## 📡 Built-In FM Transmitter - Transmit audio directly to your car radio - Play music through your vehicle speakers - Works from internal or SD card storage --- ## 💾 Storage & Expandability - **8GB internal memory** - MicroSD slot for maps and media - Store music, videos and photos --- ## 🎵 Multimedia Features - Video player (AVI, WMV) - Audio player (MP3, WAV) - Photo viewer (JPG, BMP, PNG) ✔ More than just navigation --- ## 🔌 Connectivity - Mini USB port - MicroSD card slot - Headphone jack --- ## Key Features - 7” touchscreen sat nav - Full Europe maps - Lifetime updates - FM transmitter - 8GB internal memory - Multimedia player - Fast processor --- ## What’s in the Box? - PNI L810 Sat Nav - Stylus - Power cable - Mounting accessories - User manual --- ## Why Choose the L810? ✔ No reliance on mobile data ✔ Large, easy-to-read screen ✔ Reliable navigation across Europe ✔ Extra multimedia features --- ## Ideal For - Cars, vans and motorhomes - European travel - Drivers wanting dedicated navigation - Backup GPS to phone apps --- ## Straight Talking If you want a **simple, reliable sat nav with a big screen and no signal issues**, this does exactly what you need. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/gps-navigation-system-pni-l810-7-inch-screen-800-mhz-256mb-ddr-8gb-internal-m/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/gps-navigation-system-pni-l810-7-inch-screen-800-mhz-256mb-ddr-8gb-internal-m/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/gps-navigation-system-pni-l810-7-inch-screen-800-mhz-256mb-ddr-8gb-internal-m/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/gps-navigation-system-pni-l810-7-inch-screen-800-mhz-256mb-ddr-8gb-internal-m/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20GPS%20Navigation%20System%20PNI%20L810%207%20inch%20screen&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fgps-navigation-system-pni-l810-7-inch-screen-800-mhz-256mb-ddr-8gb-internal-m%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/gps-navigation-system-pni-l810-7-inch-screen-800-mhz-256mb-ddr-8gb-internal-m/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/gps-navigation-system-pni-l810-7-inch-screen-800-mhz-256mb-ddr-8gb-internal-m/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/gps-navigation-system-pni-l810-7-inch-screen-800-mhz-256mb-ddr-8gb-internal-m/?share=telegram) - **Product categories:** Other --- ### [Compact CB Aerial mag mount PNI Extra 45cm](https://cbradio.co.uk/product/compact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w/) **Published:** October 9, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=6KcJE2N7iEU[/embed] **Content:** The **PNI Extra 48 CB Antenna** is a **compact, discreet magnetic mount aerial** designed for drivers who want **reliable CB performance without a large visible antenna**. At just **45cm tall**, it blends in with standard car aerials while still delivering **solid communication range for everyday use**. --- ## 🚗 Discreet & Low Profile Design ✔ Only **45cm height** ✔ Looks similar to a standard car antenna ✔ Ideal for cars, vans and minibuses ✔ Perfect for users who prefer a subtle setup --- ## 📡 Reliable CB Performance - Frequency range: **26–30 MHz** - Optimised for CB radio use - Average communication range up to **~10 km** (ideal conditions) --- ## ⚙️ Excellent SWR Performance - **SWR close to 1.0:1** - Efficient signal transmission - Helps protect your radio equipment --- ## 🌬 Aerodynamic & Quiet - Special **anti-noise design** - Reduces wind resistance - Minimises wind noise while driving --- ## 🔧 Easy Magnetic Mount Installation - Quick fit magnetic base - No drilling required - Easy to remove when not in use --- ## Key Features - Compact CB antenna - Magnetic mount - Low profile (45cm) - SWR ~1.0 - 150W power handling - Aerodynamic design - Easy installation --- ## Technical Specifications - **Frequency Range:** 26 – 30 MHz - **Length:** 45 cm - **SWR:** ~1.0:1 - **Power Handling:** 150W - **Mount Type:** Magnetic base - **Use:** Mobile CB installations --- ## Why Choose the Extra 48? ✔ Discreet, almost invisible install ✔ Easy to fit and remove ✔ Good performance for its size ✔ Ideal everyday antenna --- ## Ideal For - Cars and small vans - Urban driving - Users wanting a subtle antenna - Short to medium range communication --- ## Straight Talking If you don’t want a big whip on your roof but still need **decent CB performance**, this is a great low-profile option. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/compact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/compact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/compact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/compact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Compact%20CB%20Aerial%20mag%20mount%20PNI%20Extra%2045cm&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcompact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/compact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/compact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/compact-cb-aerial-mag-mount-pni-extra-45-cm-swr-1-0-26-30mhz-150w/?share=telegram) - **Product categories:** CB Aerials, PNI CB Antennas --- ### [TTi 550n evo Multi standard mobile CB radio](https://cbradio.co.uk/product/tti-550n-multi-standard-mobile-cb-radio/) **Published:** September 19, 2021 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=Xp5q5YzTn0w[/embed] **Content:** The **TTi TCB-550N EVO CB Radio** is a compact, easy-to-use CB radio designed for **modern vehicles and first-time users**. With its **slim design, Auto Squelch function and multi-standard capability**, it’s one of the best entry-level radios for anyone looking to get on CB quickly and easily. --- ## 🚗 Slim & Compact Design ✔ Compact size: **124 x 136 x 37.5 mm** ✔ Ideal for tight dashboard spaces ✔ Easy installation in cars, vans and trucks --- ## 🌍 Multi-Standard European Use - Works across multiple EU bands - AM / FM operation - Perfect for UK and European travel --- ## 🔊 Auto Squelch (ASQ) – Easy Operation - Turn fully anti-clockwise to activate **Auto Squelch** - Automatically filters background noise - Switch back to manual squelch when needed ✔ Great for beginners — no constant adjustment required --- ## ⚙️ Practical Everyday Features - Channel scan - Emergency channel access - 4 memory channels - Keypad lock - PA capability --- ## 🎛 Simple Menu Controls - Beep tone on/off - Time Out Timer (TOT) - Backlight dimmer --- ## 🎨 Blue Backlit Display - Clear **blue illumination** - Easy-to-read channel display - Simple layout for quick use --- ## Key Features - AM / FM CB radio - 40 channels - Multi-standard operation - Auto squelch + manual control - Compact design - Scan & memory functions - Blue backlit display --- ## Technical Specifications **General** - **Frequency Range:** 26.965 – 27.405 MHz - **Modes:** AM / FM - **Power Supply:** 13.8V DC - **Dimensions:** 124 x 136 x 37.5 mm - **Weight:** 670 g **Transmitter** - **Output Power:** 4W - **Modulation:** AM (85–95%), FM (±1.8 kHz) - **Current:** 1.6A max **Receiver** - **Sensitivity:** - AM: 0.7 µV - FM: 0.5 µV - **Audio Output:** 2W - **Selectivity:** High performance dual conversion --- ## Why Choose the TCB-550N EVO? ✔ Simple and easy to use ✔ Compact for modern vehicles ✔ Great value entry-level CB ✔ Reliable performance from TTi --- ## Ideal For - Beginners - Everyday drivers - Cars, vans and trucks - Budget-friendly CB setups --- ## Straight Talking If you’re just getting into CB and want something **simple, compact and reliable**, this is one of the best starting points. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tti-550n-multi-standard-mobile-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tti-550n-multi-standard-mobile-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tti-550n-multi-standard-mobile-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tti-550n-multi-standard-mobile-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TTi%20550n%20evo%20Multi%20standard%20mobile%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftti-550n-multi-standard-mobile-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tti-550n-multi-standard-mobile-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tti-550n-multi-standard-mobile-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tti-550n-multi-standard-mobile-cb-radio/?share=telegram) - **Product categories:** TTi --- ### [TTi TCB 1100 cb radio front speaker](https://cbradio.co.uk/product/tti-tcb-1100-mobile-cb-radio/) **Published:** September 19, 2021 **Author:** Jan **Content:** The **TTI TCB-1100 CB Radio** is the **flagship model in the TTi range**, designed for users who want **maximum features, strong audio performance and a clean DIN installation**. Packed with advanced functions like **compander audio processing, CTCSS tones, VOX and memory scanning**, this radio delivers **professional-level control in a user-friendly layout**. --- ## 🚗 DIN Mount Ready – Clean Installation ✔ Supplied with **DIN mounting kit** ✔ Fits standard dashboard radio slots ✔ Ideal for modern cars, vans and trucks --- ## 🔊 Front Speaker Advantage - Built-in **front-facing speaker** - Clear, direct audio towards the driver - Perfect for enclosed dashboards --- ## 🌍 Multi-Standard Operation - **80 channels (40 UK + 40 EU)** - AM / FM operation - Suitable for use across Europe --- ## 🎛 Advanced Audio Processing - **Compander system** – improves audio clarity - **CTCSS tones** for selective communication - RF Gain & Mic Gain control - ANL noise filtering ✔ Cleaner, stronger audio in busy environments --- ## ⚙️ Feature-Packed Performance - Dual Watch (monitor two channels) - Channel scan & memory scan - VOX hands-free function - Last channel recall - Memory storage channels - Emergency channels **9 / 19** --- ## 🎨 Customisable Display - Multi-colour backlighting - Clear frequency and channel display - Easy-to-read layout --- ## 🔧 Practical Controls - Keypad lock & remote lock - Menu system for custom settings - Quick channel up/down - Remote microphone controls --- ## 🔌 Connectivity - External speaker connection - External S-meter connection - SO-239 antenna connector --- ## Key Features - Flagship TTi CB radio - AM / FM multi-standard - 80 channels (UK + EU) - DIN mount included - Front speaker - Compander & CTCSS - VOX hands-free - Scan & memory functions --- ## Technical Specifications **General** - **Frequency Range:** 26.965 – 27.99125 MHz - **Power Supply:** 13.8V DC - **Dimensions:** 190 x 165 x 58 mm - **Weight:** 978.5 g **Transmitter** - **Output Power:** 4W - **Modulation:** AM (85–95%), FM (±1.8 kHz) - **Current:** 1.6A max **Receiver** - **Sensitivity:** 0.7 µV (AM/FM) - **Audio Output:** 4W - **Selectivity:** 60 dB --- ## What’s in the Box? - TCB-1100 radio - Microphone - DIN mounting kit - Mounting bracket & screws - Microphone clip - Power lead - User manual --- ## Why Choose the TCB-1100? ✔ Flagship model with full feature set ✔ Excellent audio clarity (compander system) ✔ Clean DIN installation ✔ Ideal for serious CB users --- ## Ideal For - Advanced CB users - HGV and van drivers - European travel - Users wanting more control and features --- ## Straight Talking If you want a **top-of-the-range CB radio with all the features you’ll actually use**, this is one of the best options in the TTi lineup. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tti-tcb-1100-mobile-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tti-tcb-1100-mobile-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tti-tcb-1100-mobile-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tti-tcb-1100-mobile-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TTi%20TCB%201100%20cb%20radio%20front%20speaker&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftti-tcb-1100-mobile-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tti-tcb-1100-mobile-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tti-tcb-1100-mobile-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tti-tcb-1100-mobile-cb-radio/?share=telegram) - **Product categories:** TTi --- ### [ultra compact CB radio Maas KCB-2000 V3 UK/EU](https://cbradio.co.uk/product/ultra-compact-cb-radio-maas-kcb-2000-v3-uk-eu-80-channel-am-fm-multi-norm/) **Published:** January 11, 2022 **Author:** Jan **Content:** The **MAAS KCB-2000 V3 CB Radio** is an ultra-compact, feature-packed CB radio designed for **modern vehicles and tight installations**. Built on the same proven platform as the PNI HP6500 / CRT Millennium — but upgraded with a **higher-quality microphone**, this model delivers **excellent performance in a very small footprint**. --- ## 🚗 Ultra-Compact Design ✔ Size: **120 x 110 x 27 mm** ✔ Perfect for tight dashboards and hidden installs ✔ Lightweight and easy to mount ✔ Ideal for cars, vans and trucks --- ## 🎤 Upgraded Detachable Microphone - **Detachable mic** for flexible installation - Improved microphone quality vs similar models - Easy storage and clean setup --- ## 🔧 Quick Disconnect Mounting - Supplied with **quick-release bracket** - Easily remove or reposition the radio - Ideal for shared vehicles or temporary installs --- ## 🌍 Multi-Standard European Operation - **40 UK + 40 EU channels** - AM / FM operation - Ready for use across Europe --- ## 🔊 Strong Audio & Control - **ASQ (Auto Squelch) + Manual Squelch** - RF Gain adjustment - Built-in S-meter - Clear and stable communication --- ## ⚙️ Practical Features - Channel scan (automatic search) - Keypad lock - Instant access to **CH9 / CH19** - External speaker socket (3.5mm) --- ## 🎨 Clear Blue LCD Display - Bright **blue backlit display** - Easy-to-read channel and signal information - Clean, modern look --- ## Key Features - Ultra-compact CB radio - AM / FM modes - 40 UK + 40 EU channels - Detachable microphone - Quick-release mounting bracket - ASQ + RF Gain - Scan function - External speaker support --- ## Technical Specifications - **Frequency Bands:** Multi-standard EU - **Modes:** AM / FM - **Output Power:** 4W - **Dimensions:** 120 x 110 x 27 mm - **Weight:** 470 g - **Display:** Blue LCD - **Antenna Connector:** SO-239 --- ## Why Choose the KCB-2000 V3? ✔ One of the most compact CB radios available ✔ Improved microphone over similar models ✔ Quick-release mounting system ✔ Great balance of size and performance --- ## Ideal For - Tight dashboard installs - Modern vehicles - Drivers wanting a discreet setup - Everyday CB users --- ## Straight Talking If space is tight but you still want a **proper CB radio with good features**, this is one of the best compact options available. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ultra-compact-cb-radio-maas-kcb-2000-v3-uk-eu-80-channel-am-fm-multi-norm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ultra-compact-cb-radio-maas-kcb-2000-v3-uk-eu-80-channel-am-fm-multi-norm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ultra-compact-cb-radio-maas-kcb-2000-v3-uk-eu-80-channel-am-fm-multi-norm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ultra-compact-cb-radio-maas-kcb-2000-v3-uk-eu-80-channel-am-fm-multi-norm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20ultra%20compact%20CB%20radio%20Maas%20KCB-2000%20V3%20UK%2FEU&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fultra-compact-cb-radio-maas-kcb-2000-v3-uk-eu-80-channel-am-fm-multi-norm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ultra-compact-cb-radio-maas-kcb-2000-v3-uk-eu-80-channel-am-fm-multi-norm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ultra-compact-cb-radio-maas-kcb-2000-v3-uk-eu-80-channel-am-fm-multi-norm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ultra-compact-cb-radio-maas-kcb-2000-v3-uk-eu-80-channel-am-fm-multi-norm/?share=telegram) - **Product categories:** MAAS --- ### [UHF PMR radio PNI Escort HP-446 199 channels](https://cbradio.co.uk/product/uhf-pmr-radio-pni-escort-hp-446-199-channels-asq-9-levels-scan-dual-watch-ctcss-dcs-power-0-5w-to-15w-nrc-function/) **Published:** September 18, 2023 **Author:** Jan **Content:** The **PNI Escort HP 446 UHF Radio** is a powerful and flexible communication solution designed for **professional and licensed users**. Operating across **400–470 MHz (UHF)**, this radio offers **high output power, advanced customisation and enhanced audio clarity** — making it ideal for demanding communication environments. --- ## ⚠️ Important Licensing Information Transmission on UHF frequencies typically **requires a licence** in many regions. ✔ Reception is free ✔ Transmission must comply with local regulations --- ## 📡 Powerful UHF Performance ✔ Frequency range: **400 – 470 MHz** ✔ Adjustable power levels: - **15W (High)** - **5W (Medium)** - **0.5W (Low)** Designed for strong, reliable communication across varying distances. --- ## 🔊 Advanced Audio Clarity (NRC) - Built-in **NRC (Noise Reduction Circuit)** - Reduces background noise for clearer reception - Works alongside **ASQ (9 levels)** ✔ Noticeably improved audio quality in real-world conditions --- ## 🎛 Flexible Operating Modes - **Frequency Mode (FRQ)** - **Channel Mode (CH)** - **Channel Name Mode (NM)** Customise how information is displayed and used. --- ## ⚙️ Fully Customisable The HP 446 offers extensive control over your setup: - Manual channel programming - Frequency editing - Scan mode selection - Add/remove channels from scan - Call coding (privacy tones) - Adjustable squelch (9 levels) - Frequency step selection --- ## Key Features - UHF mobile radio (400–470 MHz) - Adjustable output power (15W / 5W / 0.5W) - NRC noise reduction - ASQ (automatic squelch) - Multiple display modes - Channel scan - Programmable channels and frequencies --- ## Why Choose the HP 446? ✔ High power for extended range ✔ Advanced noise reduction ✔ Fully programmable and flexible ✔ Suitable for professional and licensed use --- ## Ideal For - Licensed radio users - Professional communication systems - Security and event use - Workshop and site communication - Advanced radio setups --- ## Straight Talking If you need a **powerful, flexible UHF radio with proper control and clarity**, this is a serious bit of kit — just make sure you’re licensed to use it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/uhf-pmr-radio-pni-escort-hp-446-199-channels-asq-9-levels-scan-dual-watch-ctcss-dcs-power-0-5w-to-15w-nrc-function/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/uhf-pmr-radio-pni-escort-hp-446-199-channels-asq-9-levels-scan-dual-watch-ctcss-dcs-power-0-5w-to-15w-nrc-function/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/uhf-pmr-radio-pni-escort-hp-446-199-channels-asq-9-levels-scan-dual-watch-ctcss-dcs-power-0-5w-to-15w-nrc-function/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/uhf-pmr-radio-pni-escort-hp-446-199-channels-asq-9-levels-scan-dual-watch-ctcss-dcs-power-0-5w-to-15w-nrc-function/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20UHF%20PMR%20radio%20PNI%20Escort%20HP-446%20199%20channels&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fuhf-pmr-radio-pni-escort-hp-446-199-channels-asq-9-levels-scan-dual-watch-ctcss-dcs-power-0-5w-to-15w-nrc-function%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/uhf-pmr-radio-pni-escort-hp-446-199-channels-asq-9-levels-scan-dual-watch-ctcss-dcs-power-0-5w-to-15w-nrc-function/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/uhf-pmr-radio-pni-escort-hp-446-199-channels-asq-9-levels-scan-dual-watch-ctcss-dcs-power-0-5w-to-15w-nrc-function/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/uhf-pmr-radio-pni-escort-hp-446-199-channels-asq-9-levels-scan-dual-watch-ctcss-dcs-power-0-5w-to-15w-nrc-function/?share=telegram) - **Product categories:** PMR 446 Mobile radio --- ### [PNI HP62 1500mAh Li-Ion battery aerial kit](https://cbradio.co.uk/product/pni-hp62-1500mah-li-ion-battery-kit-230v-charger-8-4v-and-bnc-rubber-duck-aerial/) **Published:** October 18, 2023 **Author:** Jan **Content:** Turn your mobile CB into a portable handheld. The **PNI HP62 Portable Kit** allows you to convert your **PNI Escort HP 62 CB radio** into a fully portable unit — perfect for use on the move, away from your vehicle. --- ## 🔋 Go Fully Portable With this kit you can: ✔ Use your CB radio **anywhere** ✔ Operate without a vehicle power supply ✔ Take your radio on foot, site, or outdoors A simple upgrade that adds real flexibility. --- ## 📦 Complete Conversion Kit Everything you need is included: - **Li-Ion Battery Pack (1500mAh)** - **Battery case for HP62** - **230V mains charger** - **BNC antenna** ✔ **Batteries included – ready to use** --- ## ⚡ Reliable Power - 1500mAh Li-Ion battery - Rechargeable via standard **230V mains socket** - Designed specifically for the HP62 --- ## 🔧 Designed for Perfect Compatibility - Made for **PNI Escort HP 62 CB Radio** - Easy fit battery housing - No modification required --- ## Ideal For - Portable CB use - Outdoor activities - Events and site work - Backup communication - Users wanting flexibility beyond vehicle use --- ## Why Choose This Kit? ✔ Turns your radio into a true handheld ✔ Simple plug-and-play setup ✔ Compact and easy to carry ✔ Genuine matched accessory kit --- ## Straight Talking If you’ve got a HP62, this is the upgrade that lets you **take it anywhere**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-hp62-1500mah-li-ion-battery-kit-230v-charger-8-4v-and-bnc-rubber-duck-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-hp62-1500mah-li-ion-battery-kit-230v-charger-8-4v-and-bnc-rubber-duck-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-hp62-1500mah-li-ion-battery-kit-230v-charger-8-4v-and-bnc-rubber-duck-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-hp62-1500mah-li-ion-battery-kit-230v-charger-8-4v-and-bnc-rubber-duck-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20HP62%201500mAh%20Li-Ion%20battery%20aerial%20kit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-hp62-1500mah-li-ion-battery-kit-230v-charger-8-4v-and-bnc-rubber-duck-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-hp62-1500mah-li-ion-battery-kit-230v-charger-8-4v-and-bnc-rubber-duck-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-hp62-1500mah-li-ion-battery-kit-230v-charger-8-4v-and-bnc-rubber-duck-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-hp62-1500mah-li-ion-battery-kit-230v-charger-8-4v-and-bnc-rubber-duck-aerial/?share=telegram) - **Product categories:** CB radio Hand Helds --- ### [LED 2000 CB Radio antenna 90cm145mm magmount](https://cbradio.co.uk/product/cb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission/) **Published:** March 20, 2024 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=EXkaGfHiWCA&t=3s[/embed] **Content:** The **PNI LED 2000 CB Antenna** brings something different to CB — **a built-in illuminated coil that lights up when you transmit**. The harder you push it, the brighter it glows. It’s not just about looks though — this is a **proper 90cm CB antenna** with solid performance and strong everyday usability. --- ## 💡 Unique LED Coil Effect - Coil **lights up during transmission** - Brightness increases with transmit power - Adds a striking visual effect — especially at night Perfect for anyone who wants their setup to stand out. --- ## 📡 Strong Everyday Performance ✔ Covers the **26–28 MHz CB band** ✔ SWR < 1.2:1 (well-tuned performance) ✔ Up to **500W power handling** ✔ Reliable signal for everyday communication --- ## 🚗 Ready to Install - Supplied with **145mm magnetic base** - Includes **coax cable with PL259 plug** - Quick, no-drill installation - Easy to remove when needed --- ## 📏 Balanced Size & Range - Total length: **90cm (coil + whip)** - Good compromise between **range and practicality** - Up to **~10 km communication range** (ideal conditions) --- ## Key Features - LED illuminated coil (transmit activated) - Magnetic mount base included (145mm) - 26–28 MHz frequency range - 500W maximum power - Low SWR (<1.2:1) - Stainless steel construction - Vertical polarisation --- ## Technical Specifications - **Frequency Range:** 26 – 28 MHz - **Length:** 90 cm - **Impedance:** 52 Ohms - **Maximum Power:** 500W - **SWR:** < 1.2:1 - **Material:** Stainless steel - **Mount:** Magnetic base (145 mm) - **Connector:** PL259 --- ## Communication Range Up to **~10 km in ideal conditions**, depending on: - Terrain (open vs urban) - Antenna tuning (SWR) - Installation position - Radio power output --- ## Why Choose the LED 2000? ✔ Unique visual feature — looks great at night ✔ Solid performance for everyday CB use ✔ Easy installation with mag mount ✔ Great balance of size and range --- ## Ideal For - Drivers wanting a standout CB setup - Cars, vans and trucks - Night driving setups - CB users wanting something different --- ## Straight Talking If you want **something that performs well AND looks the part**, this antenna ticks both boxes. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20LED%202000%20CB%20Radio%20antenna%2090cm145mm%20magmount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-pni-led-2000-antenna-90-cm-with-145mm-magnetic-base-26-28-mhz-500-watt-illuminates-during-transmission/?share=telegram) - **Product categories:** CB Aerials with mount, PNI CB Antennas --- ### [RM mod KL-35 AMP 35 Watt FM HF 10 meter CB linear amplifier burner boots KL35](https://cbradio.co.uk/product/rm-mod-kl-35-amp-35-watt-fm-hf-10-meter-cb-linear-amplifier-burner-boots-kl35/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚡📡 RM Italy KL-35 Linear Amplifier – 35W CB HAM Radio Booster – AM/FM/SSB **Compact • Powerful • Easy to Use** The **RM KL-35** is a **compact linear amplifier**, designed to boost your signal on **CB and 10m amateur radio bands**. 👉 Small size, noticeable gain --- 🔥 **Why Choose This Amplifier** ✔ Boosts Transmit Power ✔ AM / FM / SSB Compatible ✔ Compact & Easy to Install ✔ Ideal for Mobile Setups ✔ Trusted RM Italy Build Quality 👉 Get more out of your radio --- 📦 **What’s Included** ✔ RM KL-35 Linear Amplifier 👉 Ready to connect --- 📡 **Performance Highlights** Frequency Range: 25–30 MHz Input Power: - 1–5W (AM/FM) - 2–10W (SSB) Output Power: - 25–35W (AM/FM) - 50–70W (SSB) 👉 Strong boost in a compact unit --- ⚙️ **Specifications** Modes: AM / FM / SSB Power Supply: 13.8V DC Current Draw: 4A Size: 109 x 35 x 89mm --- 💡 **Why This Amp Stands Out** ✔ Compact but effective ✔ Simple plug-and-play operation ✔ Ideal for mobile or base setups ✔ Great entry-level amplifier 👉 Improve your transmit performance --- 🔧 **Installation** ✔ Connect between radio and aerial ✔ Power from 13.8V supply ✔ Operate as normal 👉 Quick and straightforward setup --- ⚠️ **Important Notes** ❗ **UK CB use limited to 4W (OFCOM regulations apply)** ❗ Amateur (10m) use requires valid licence ❗ **Final transistors are NOT covered by warranty** ❗ Ensure correct SWR before use --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: SWR meters Power supplies Coax cables Aerials --- 🔥 **Order Today** **More power. Better reach. Compact setup.** ⚡📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rm-mod-kl-35-amp-35-watt-fm-hf-10-meter-cb-linear-amplifier-burner-boots-kl35/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rm-mod-kl-35-amp-35-watt-fm-hf-10-meter-cb-linear-amplifier-burner-boots-kl35/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rm-mod-kl-35-amp-35-watt-fm-hf-10-meter-cb-linear-amplifier-burner-boots-kl35/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rm-mod-kl-35-amp-35-watt-fm-hf-10-meter-cb-linear-amplifier-burner-boots-kl35/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RM%20mod%20KL-35%20AMP%2035%20Watt%20FM%20HF%2010%20meter%20CB%20linear%20amplifier%20burner%20boots%20KL35&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frm-mod-kl-35-amp-35-watt-fm-hf-10-meter-cb-linear-amplifier-burner-boots-kl35%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rm-mod-kl-35-amp-35-watt-fm-hf-10-meter-cb-linear-amplifier-burner-boots-kl35/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rm-mod-kl-35-amp-35-watt-fm-hf-10-meter-cb-linear-amplifier-burner-boots-kl35/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rm-mod-kl-35-amp-35-watt-fm-hf-10-meter-cb-linear-amplifier-burner-boots-kl35/?share=telegram) - **Product categories:** Linear Amplifiers --- ### [Front and Rear Ceramic Brake Pads Toyota Landcruiser 4.2 VX HDJ80 1HD-T 90/98](https://cbradio.co.uk/product/front-and-rear-ceramic-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 Toyota Land Cruiser HDJ80 Front & Rear Ceramic Brake Pads – 4.2 TD **Full Set • Ceramic • OE Quality** This is a **complete set of front & rear ceramic brake pads** for the **Toyota Land Cruiser HDJ80 4.2 TD**, designed to **meet or exceed OEM performance**. 👉 Reliable braking you can trust --- 🔥 **Why Choose These Pads** ✔ Front & Rear Complete Set ✔ High Quality Ceramic Compound ✔ OE Quality or Better ✔ Low Dust & Quiet Operation ✔ Strong, Consistent Braking 👉 Upgrade your stopping power --- 📦 **What’s Included** ✔ Front Brake Pads Set ✔ Rear Brake Pads Set 👉 Full vehicle coverage --- 🚙 **Fits** Toyota Land Cruiser HDJ80 4.2 TD Diesel 👉 Check compatibility if unsure --- 💡 **Why These Pads Stand Out** ✔ Reduced brake dust vs standard pads ✔ Quieter braking performance ✔ Durable under heavy use ✔ Ideal for road & off-road 👉 Built for real Land Cruiser use --- 🔧 **Installation** ✔ Remove old pads ✔ Fit new ceramic pads ✔ Bed in correctly 👉 Straightforward replacement --- ⚠️ **Important Notes** ❗ Ensure discs are in good condition ❗ Professional fitting recommended if unsure ❗ Always bed pads in after installation --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **More Available** 👉 Check our shop for: Brake discs Suspension parts Service items Land Cruiser spares --- 🔥 **Order Today** **Better braking. Less dust. Built to last.** 🚙🔧 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/front-and-rear-ceramic-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/front-and-rear-ceramic-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/front-and-rear-ceramic-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/front-and-rear-ceramic-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Front%20and%20Rear%20Ceramic%20Brake%20Pads%20Toyota%20Landcruiser%204.2%20VX%20HDJ80%201HD-T%2090%2F98&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ffront-and-rear-ceramic-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/front-and-rear-ceramic-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/front-and-rear-ceramic-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/front-and-rear-ceramic-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=telegram) - **Product categories:** Land Cruiser --- ### [P4 CB Radio Replacement Hand Microphone Mic 4 Pin Plug Superstar / Cobra wired](https://cbradio.co.uk/product/p4-cb-radio-replacement-hand-microphone-mic-4-pin-plug-superstar-cobra-wired/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤📡 P4 CB Radio Replacement Microphone – 4 Pin – Cobra Superstar Uniden **4 Pin • Direct Replacement • Clear Audio** This is a **P4 replacement CB microphone**, wired for **Cobra, Superstar and Uniden radios**, offering a **cost-effective solution** to get your radio back up and running. 👉 Simple plug-in replacement --- 🔥 **Why Choose This Mic** ✔ 4 Pin Standard Plug ✔ Compatible with Cobra / Superstar / Uniden ✔ Clear & Strong Modulation ✔ Direct Replacement Fit ✔ Cost Effective Solution 👉 No need to replace your whole radio --- 📦 **What’s Included** ✔ P4 CB Microphone (4 Pin) 👉 Ready to plug in --- 📡 **Perfect For** CB Radio Replacement Faulty or Damaged Microphones Mobile & Base Setups 👉 Ideal spare to keep in the glove box --- ⚙️ **Specifications** Connector: 4 Pin Plug Type: Handheld “Coffin” Style Mic Compatibility: Cobra / Superstar / Uniden (4 Pin Models) --- 💡 **Why This Mic Stands Out** ✔ Good quality modulation ✔ Reliable everyday use ✔ Simple plug & play ✔ Great value for money 👉 Get back on the air quickly --- 🔧 **Installation** ✔ Plug into radio ✔ Ready to use 👉 Quick and easy --- ⚠️ **Important Notes** ❗ Ensure your radio uses a 4 pin microphone ❗ Check wiring compatibility if unsure ❗ Not universal for all brands --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: CB radios Microphones Aerials Accessories --- 🔥 **Order Today** **Clear audio. Easy fix. Built to last.** 🎤📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/p4-cb-radio-replacement-hand-microphone-mic-4-pin-plug-superstar-cobra-wired/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/p4-cb-radio-replacement-hand-microphone-mic-4-pin-plug-superstar-cobra-wired/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/p4-cb-radio-replacement-hand-microphone-mic-4-pin-plug-superstar-cobra-wired/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/p4-cb-radio-replacement-hand-microphone-mic-4-pin-plug-superstar-cobra-wired/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20P4%20CB%20Radio%20Replacement%20Hand%20Microphone%20Mic%204%20Pin%20Plug%20Superstar%20%2F%20Cobra%20wired&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fp4-cb-radio-replacement-hand-microphone-mic-4-pin-plug-superstar-cobra-wired%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/p4-cb-radio-replacement-hand-microphone-mic-4-pin-plug-superstar-cobra-wired/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/p4-cb-radio-replacement-hand-microphone-mic-4-pin-plug-superstar-cobra-wired/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/p4-cb-radio-replacement-hand-microphone-mic-4-pin-plug-superstar-cobra-wired/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [P6 CB Radio Replacement Hand Microphone Mic 6 Pin Plug President / midland wired](https://cbradio.co.uk/product/p6-cb-radio-replacement-hand-microphone-mic-6-pin-plug-president-midland-wired/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤📡 P6 CB Radio Replacement Microphone – 6 Pin – President Midland Uniden **6 Pin • Direct Replacement • Clear Audio** This is a **P6 replacement CB microphone**, wired for **President, Midland and Uniden radios**, offering a **cost-effective upgrade or replacement**. 👉 Get your radio back on the air --- 🔥 **Why Choose This Mic** ✔ 6 Pin Standard Plug ✔ Compatible with President / Midland / Uniden ✔ Clear & Strong Modulation ✔ Direct Replacement Fit ✔ Cost Effective Solution 👉 Simple fix, great performance --- 📦 **What’s Included** ✔ P6 CB Microphone (6 Pin) 👉 Ready to plug in --- 📡 **Perfect For** CB Radio Replacement Upgrading Old / Faulty Mics Mobile & Base Setups 👉 Ideal spare to keep handy --- ⚙️ **Specifications** Connector: 6 Pin Plug Type: Handheld “Coffin” Style Mic Compatibility: President / Midland / Uniden (6 Pin Models) --- 💡 **Why This Mic Stands Out** ✔ Good quality audio modulation ✔ Simple plug & play replacement ✔ Durable and easy to use ✔ Great value for money 👉 No need to replace your whole radio --- 🔧 **Installation** ✔ Plug into radio ✔ Ready to use 👉 Quick and easy --- ⚠️ **Important Notes** ❗ Ensure your radio uses a 6 pin microphone ❗ Check wiring compatibility if unsure ❗ Not universal for all brands --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: CB radios Microphones Aerials Accessories --- 🔥 **Order Today** **Clear audio. Easy fix. Back on the air.** 🎤📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/p6-cb-radio-replacement-hand-microphone-mic-6-pin-plug-president-midland-wired/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/p6-cb-radio-replacement-hand-microphone-mic-6-pin-plug-president-midland-wired/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/p6-cb-radio-replacement-hand-microphone-mic-6-pin-plug-president-midland-wired/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/p6-cb-radio-replacement-hand-microphone-mic-6-pin-plug-president-midland-wired/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20P6%20CB%20Radio%20Replacement%20Hand%20Microphone%20Mic%206%20Pin%20Plug%20President%20%2F%20midland%20wired&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fp6-cb-radio-replacement-hand-microphone-mic-6-pin-plug-president-midland-wired%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/p6-cb-radio-replacement-hand-microphone-mic-6-pin-plug-president-midland-wired/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/p6-cb-radio-replacement-hand-microphone-mic-6-pin-plug-president-midland-wired/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/p6-cb-radio-replacement-hand-microphone-mic-6-pin-plug-president-midland-wired/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [TTI TCB 900 mobile CB radio AM FM UK EU dual voltage front speaker](https://cbradio.co.uk/product/tti-tcb-900-mobile-cb-radio-am-fm-uk-eu-dual-voltage-front-speaker/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=GD-wXM8t6DA[/embed] **Content:** ## 📻🚛 TTI TCB-900 CB Radio – AM/FM Multi Band – Ultra Short Body – DIN Fit **Ultra Compact • Front Speaker • Built for Trucks** The **TTI TCB-900** is one of the **shortest CB radios available**, designed for **tight installs** without compromising on performance. 👉 Perfect where space is limited --- 🔥 **Why Choose This Radio** ✔ Ultra Short Body (Only 94mm Depth) ✔ Front Mounted Speaker ✔ Front Mic Socket ✔ Multi Standard (UK & EU Bands) ✔ 12V / 24V Operation 👉 Designed for real vehicle installs --- 📦 **What’s Included** ✔ TTI TCB-900 CB Radio ✔ Microphone ✔ Mounting Bracket & Fixings ✔ Power Lead 👉 Ready to install --- 📡 **Key Features** ✔ 40 Channels (UK & EU Bands) ✔ AM / FM Operation ✔ DSS (Dynamic Squelch System) ✔ Microphone Gain Control ✔ Scan Function ✔ CH9 / CH19 Emergency Access ✔ Keypad Lock ✔ Attenuation Function ✔ Speaker Mute ✔ Menu Mode Settings --- 🎨 **Display & Controls** ✔ Large easy-to-read LCD ✔ 3 Colour Selectable Backlight ✔ Rotary & button controls ✔ Clear signal & channel display 👉 One of the easiest radios to read --- ⚙️ **Specifications** Power Output: 4 Watts Modes: AM / FM Power Input: 12V / 24V Dimensions: 170 x 51 x 94mm Weight: 978g Antenna Connector: SO239 Microphone: 6 Pin --- 🚙 **Perfect For** Trucks Vans 4×4 Vehicles Cars with limited space DIN slot installations (with optional adaptor) 👉 Ideal for tight dashboards --- 💡 **Why This Radio Stands Out** ✔ One of the shortest CB radios available ✔ Front speaker – no muffled audio ✔ Easy install in tight spaces ✔ Large clear display ✔ Built with truckers in mind 👉 Big performance in a compact unit --- 🔧 **Installation** ✔ Mount under dash or in DIN slot (adapter optional) ✔ Connect power ✔ Attach aerial 👉 Quick and flexible setup --- ⚠️ **Important Notes** ❗ DIN mount adapter sold separately ❗ Ensure aerial is tuned (SWR) before transmitting ❗ Suitable for 12V & 24V systems --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: DIN mounts Aerials SWR meters Power leads --- 🔥 **Order Today** **Ultra compact. Clear audio. Built for real use.** 📻📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tti-tcb-900-mobile-cb-radio-am-fm-uk-eu-dual-voltage-front-speaker/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tti-tcb-900-mobile-cb-radio-am-fm-uk-eu-dual-voltage-front-speaker/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tti-tcb-900-mobile-cb-radio-am-fm-uk-eu-dual-voltage-front-speaker/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tti-tcb-900-mobile-cb-radio-am-fm-uk-eu-dual-voltage-front-speaker/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TTI%20TCB%20900%20mobile%20CB%20radio%20AM%20FM%20UK%20EU%20dual%20voltage%20front%20speaker&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftti-tcb-900-mobile-cb-radio-am-fm-uk-eu-dual-voltage-front-speaker%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tti-tcb-900-mobile-cb-radio-am-fm-uk-eu-dual-voltage-front-speaker/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tti-tcb-900-mobile-cb-radio-am-fm-uk-eu-dual-voltage-front-speaker/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tti-tcb-900-mobile-cb-radio-am-fm-uk-eu-dual-voltage-front-speaker/?share=telegram) - **Product categories:** TTi --- ### [BNC Mini UHF adapter BNC Jack to Mini UHF Plug straight For Yaesu Mobile Radio](https://cbradio.co.uk/product/bnc-mini-uhf-adapter-bnc-jack-to-mini-uhf-plug-straight-for-yaesu-mobile-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 BNC Female to Mini UHF Male Adapter – Straight – 50 Ohm – Yaesu Compatible **Compact • Reliable • Easy Fit** This is a **BNC female (jack) to Mini UHF male adapter**, ideal for **Yaesu mobile radios and RF setups**. 👉 Perfect for connecting BNC cables to Mini UHF equipment --- 🔥 **Why Choose This Adapter** ✔ BNC Female to Mini UHF Male ✔ 50 Ohm RF Connection ✔ Straight Compact Design ✔ Durable Nickel Plated Finish ✔ Quick Connect / Disconnect (BNC Bayonet) 👉 Simple solution for mixed connectors --- 📦 **What’s Included** ✔ BNC Jack to Mini UHF Plug Adapter 👉 Ready to use --- 📡 **Perfect For** Yaesu Mobile Radios CB & HAM Radio Test Equipment RF & Coax Cable Setups 👉 Ideal for adapting aerial connections --- ⚙️ **Specifications** Connector 1: BNC Female (Jack) Connector 2: Mini UHF Male (Plug) Impedance: 50 Ohm Style: Straight Plating: Nickel Mounting: Free Hanging --- 💡 **Why This Adapter Stands Out** ✔ Fast BNC connect/disconnect system ✔ Strong, reliable RF connection ✔ Compact and easy to fit ✔ Clean signal transfer 👉 A must-have adaptor --- 🔧 **Installation** ✔ Connect BNC side (twist-lock) ✔ Attach Mini UHF side ✔ Ready to go 👉 Quick and simple --- ⚠️ **Important Notes** ❗ Check connector types before purchase ❗ Ensure tight fit for best performance ❗ Suitable for RF applications --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: Coax cables Adaptors Aerials Radio accessories --- 🔥 **Order Today** **Right connection. No hassle. Built to last.** 📡🔌 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/bnc-mini-uhf-adapter-bnc-jack-to-mini-uhf-plug-straight-for-yaesu-mobile-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/bnc-mini-uhf-adapter-bnc-jack-to-mini-uhf-plug-straight-for-yaesu-mobile-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/bnc-mini-uhf-adapter-bnc-jack-to-mini-uhf-plug-straight-for-yaesu-mobile-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/bnc-mini-uhf-adapter-bnc-jack-to-mini-uhf-plug-straight-for-yaesu-mobile-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20BNC%20Mini%20UHF%20adapter%20BNC%20Jack%20to%20Mini%20UHF%20Plug%20straight%20For%20Yaesu%20Mobile%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fbnc-mini-uhf-adapter-bnc-jack-to-mini-uhf-plug-straight-for-yaesu-mobile-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/bnc-mini-uhf-adapter-bnc-jack-to-mini-uhf-plug-straight-for-yaesu-mobile-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/bnc-mini-uhf-adapter-bnc-jack-to-mini-uhf-plug-straight-for-yaesu-mobile-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/bnc-mini-uhf-adapter-bnc-jack-to-mini-uhf-plug-straight-for-yaesu-mobile-radio/?share=telegram) - **Product categories:** RF Adaptors --- ### [FME MALE to MINI UHF MALE Adaptor for MOTOROLA](https://cbradio.co.uk/product/fme-male-to-mini-uhf-male-adaptor-for-motorola/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 FME Male to Mini UHF Male Adapter – Motorola Type – RF Coax Adaptor **Compact • Reliable • Easy Fit** This is an **FME Male to Mini UHF Male adaptor**, ideal for **Motorola style installations and RF connections**. 👉 Simple solution for connecting different coax types --- 🔥 **Why Choose This Adapter** ✔ FME Male to Mini UHF Male ✔ Ideal for Motorola Kits ✔ Compact & Durable Design ✔ Reliable Signal Transfer ✔ Easy Plug & Play 👉 No need to change cables --- 📦 **What’s Included** ✔ FME Male to Mini UHF Male Adapter 👉 Ready to use --- 📡 **Perfect For** Motorola Installations Mobile Radio Setups CB & HAM Radio RF Cable Adaptation 👉 Ideal for mixed connector setups --- ⚙️ **Specifications** Connector 1: FME Male Connector 2: Mini UHF Male Type: Between Series Adapter --- 💡 **Why This Adapter Stands Out** ✔ Strong, secure connection ✔ Compact and easy to fit ✔ Clean signal transfer ✔ Essential for adaptor setups 👉 A must-have connector --- 🔧 **Installation** ✔ Connect to FME cable ✔ Attach Mini UHF side ✔ Ready to go 👉 Quick and simple --- ⚠️ **Important Notes** ❗ Check connector types before purchase ❗ Ensure secure connection for best performance ❗ Suitable for RF applications --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: Coax cables Adaptors Aerials Radio accessories --- 🔥 **Order Today** **Right connection. No hassle. Built to last.** 📡🔌 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/fme-male-to-mini-uhf-male-adaptor-for-motorola/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/fme-male-to-mini-uhf-male-adaptor-for-motorola/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/fme-male-to-mini-uhf-male-adaptor-for-motorola/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/fme-male-to-mini-uhf-male-adaptor-for-motorola/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20FME%20MALE%20to%20MINI%20UHF%20MALE%20Adaptor%20for%20MOTOROLA&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ffme-male-to-mini-uhf-male-adaptor-for-motorola%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/fme-male-to-mini-uhf-male-adaptor-for-motorola/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/fme-male-to-mini-uhf-male-adaptor-for-motorola/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/fme-male-to-mini-uhf-male-adaptor-for-motorola/?share=telegram) - **Product categories:** RF Adaptors --- ### [SCART to 2 x Phono RCA Lead 1.5M cable AV to Audio Heavy Duty metal connectors](https://cbradio.co.uk/product/scart-to-2-x-phono-rca-lead-1-5m-cable-av-to-audio-heavy-duty-metal-connectors/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎥🔌 1.5m SCART to 2x RCA Phono Audio Cable – Gold Plated – Stereo Lead **High Quality • Gold Plated • Ready to Use** This is a **1.5 metre SCART to 2x RCA phono audio lead**, ideal for connecting **TVs, VCRs, DVD players and other AV equipment**. 👉 Simple solution for stereo audio connections --- 🔥 **Why Choose This Cable** ✔ Gold Plated Connectors ✔ High Quality Screened Cable ✔ Clean Stereo Audio Signal ✔ Durable Metal SCART Plug ✔ Ready to Use 👉 Proper quality – not cheap leads --- 📦 **What’s Included** ✔ 1.5m SCART to 2x RCA Audio Cable 👉 Plug in and go --- 📡 **Perfect For** TVs DVD Players VCRs Hi-Fi Systems AV Equipment 👉 Ideal for stereo audio connections --- ⚙️ **Specifications** Length: 1.5 Metres Connector 1: SCART Plug Connector 2: 2x RCA Phono (Audio) Contacts: Gold Plated Cable Type: Individually Screened --- 💡 **Why This Cable Stands Out** ✔ Gold plated for better signal transfer ✔ Screened cable reduces interference ✔ Strong metal SCART connector ✔ Reliable audio performance 👉 Don’t be fooled by cheap alternatives --- 🔧 **Installation** ✔ Connect SCART to device ✔ Plug RCA into audio input/output 👉 Quick and easy setup --- ⚠️ **Important Notes** ❗ Audio connection only (no video via RCA) ❗ Check input/output direction if required ❗ Compatible with standard SCART devices --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: AV cables Adaptors Connectors Radio accessories --- 🔥 **Order Today** **Clear sound. Solid build. No compromise.** 🔌🎥 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/scart-to-2-x-phono-rca-lead-1-5m-cable-av-to-audio-heavy-duty-metal-connectors/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/scart-to-2-x-phono-rca-lead-1-5m-cable-av-to-audio-heavy-duty-metal-connectors/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/scart-to-2-x-phono-rca-lead-1-5m-cable-av-to-audio-heavy-duty-metal-connectors/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/scart-to-2-x-phono-rca-lead-1-5m-cable-av-to-audio-heavy-duty-metal-connectors/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SCART%20to%202%20x%20Phono%20RCA%20%20Lead%201.5M%20cable%20AV%20to%20Audio%20Heavy%20Duty%20metal%20connectors&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fscart-to-2-x-phono-rca-lead-1-5m-cable-av-to-audio-heavy-duty-metal-connectors%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/scart-to-2-x-phono-rca-lead-1-5m-cable-av-to-audio-heavy-duty-metal-connectors/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/scart-to-2-x-phono-rca-lead-1-5m-cable-av-to-audio-heavy-duty-metal-connectors/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/scart-to-2-x-phono-rca-lead-1-5m-cable-av-to-audio-heavy-duty-metal-connectors/?share=telegram) - **Product categories:** Clearance --- ### [Anti roll front Sway bar link Toyota Landcruiser 4.2 TD HDJ80 92>](https://cbradio.co.uk/product/anti-roll-front-sway-bar-link-toyota-landcruiser-4-2-td-hdj80-92/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 Toyota Land Cruiser HDJ80 Front Anti Roll Bar Link – 4.2 TD 1992> **OE Quality • Direct Fit • Built to Last** This is a **high quality front anti-roll (sway bar) link** for the **Toyota Land Cruiser HDJ80 4.2 TD**, designed as a **direct replacement part**. 👉 Restore proper handling and stability --- 🔥 **Why Choose This Link** ✔ OE Quality Replacement ✔ Direct Fit – No Modifications ✔ Strong & Durable Construction ✔ Improves Handling & Stability ✔ Built for Long-Term Use 👉 Don’t run worn or loose links --- 📦 **What’s Included** ✔ 1x Front Anti Roll Bar Link ❗ **2 required for both sides** --- 🚙 **Fits** Toyota Land Cruiser HDJ80 4.2 TD Diesel From 08/1992 onwards --- 💡 **Why This Part Stands Out** ✔ Proper quality – not cheap pattern parts ✔ Restores correct suspension function ✔ Reduces body roll ✔ Reliable everyday performance 👉 Get your suspension working properly again --- 🔧 **Installation** ✔ Remove worn link ✔ Fit new replacement ✔ Tighten to spec 👉 Straightforward replacement --- ⚠️ **Important Notes** ❗ Sold individually (2 required per vehicle) ❗ Check compatibility before purchase ❗ Professional fitting recommended if unsure --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **More Available** 👉 Check our shop for: Land Cruiser parts Suspension components Bushes & links Service parts --- 🔥 **Order Today** **Better handling. Solid setup. Built to last.** 🚙🔧 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anti-roll-front-sway-bar-link-toyota-landcruiser-4-2-td-hdj80-92/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anti-roll-front-sway-bar-link-toyota-landcruiser-4-2-td-hdj80-92/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anti-roll-front-sway-bar-link-toyota-landcruiser-4-2-td-hdj80-92/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anti-roll-front-sway-bar-link-toyota-landcruiser-4-2-td-hdj80-92/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anti%20roll%20front%20Sway%20bar%20link%20Toyota%20Landcruiser%204.2%20TD%20HDJ80%2092%3E&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanti-roll-front-sway-bar-link-toyota-landcruiser-4-2-td-hdj80-92%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anti-roll-front-sway-bar-link-toyota-landcruiser-4-2-td-hdj80-92/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anti-roll-front-sway-bar-link-toyota-landcruiser-4-2-td-hdj80-92/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anti-roll-front-sway-bar-link-toyota-landcruiser-4-2-td-hdj80-92/?share=telegram) - **Product categories:** Land Cruiser --- ### [Midland Alan 78 Pro 80 Channel UK and Mid Band AM FM Multi Standard CB Radio](https://cbradio.co.uk/product/midland-alan-78-plus-80-channel-uk-and-mid-band-am-fm-multi-standard-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📻🚗 Midland 78 Pro Multi CB Radio – AM/FM Multi Band – Compact Mobile **Compact • Multi Standard • Easy to Use** The **Midland 78 Pro Multi** is a **compact, no-nonsense CB radio** packed with useful features, perfect for **everyday mobile use**. 👉 Simple, reliable and affordable --- 🔥 **Why Choose This Radio** ✔ Multi Standard (UK & EU Bands) ✔ AM / FM Operation ✔ Compact & Easy to Install ✔ Clear Backlit Display ✔ Great Value for Money 👉 Ideal all-round CB radio --- 📦 **What’s Included** ✔ Midland 78 Pro Multi CB Radio ✔ Microphone with Up/Down Buttons ✔ Mounting Bracket & Fixings ✔ Power Lead 👉 Ready to install --- 📡 **Key Features** ✔ 40 UK + 40 EU Channels ✔ Additional European Bands ✔ Scan Function ✔ EMG Emergency Channel Access ✔ Fast Channel Up/Down Selection ✔ External S-Meter Socket ✔ RX/TX Indicators ✔ Clear Orange Backlit Display --- ⚙️ **Specifications** Modes: AM / FM Power: 4 Watts Microphone: 6 Pin Connector Dimensions: 150 x 45 x 175mm Weight: 1.02kg Power Supply: 12V --- 🚙 **Perfect For** Cars 4×4 & Off-Road Vans Trucks General Mobile Use 👉 Reliable communication on the move --- 💡 **Why This Radio Stands Out** ✔ Compact but feature packed ✔ Multi-band for UK & European use ✔ Easy to operate ✔ Trusted Midland build quality 👉 Great balance of features and simplicity --- 🔧 **Installation** ✔ Mount using bracket ✔ Connect power ✔ Attach aerial 👉 Straightforward setup --- ⚠️ **Important Notes** ❗ 12V operation only ❗ Ensure aerial is tuned (SWR) before transmitting ❗ External speaker optional --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: Aerials SWR meters Mounts Power leads --- 🔥 **Order Today** **Compact. Simple. Gets the job done.** 📻📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/midland-alan-78-plus-80-channel-uk-and-mid-band-am-fm-multi-standard-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/midland-alan-78-plus-80-channel-uk-and-mid-band-am-fm-multi-standard-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/midland-alan-78-plus-80-channel-uk-and-mid-band-am-fm-multi-standard-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/midland-alan-78-plus-80-channel-uk-and-mid-band-am-fm-multi-standard-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Midland%20Alan%2078%20Pro%2080%20Channel%20UK%20and%20Mid%20Band%20AM%20FM%20Multi%20Standard%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmidland-alan-78-plus-80-channel-uk-and-mid-band-am-fm-multi-standard-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/midland-alan-78-plus-80-channel-uk-and-mid-band-am-fm-multi-standard-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/midland-alan-78-plus-80-channel-uk-and-mid-band-am-fm-multi-standard-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/midland-alan-78-plus-80-channel-uk-and-mid-band-am-fm-multi-standard-cb-radio/?share=telegram) - **Product categories:** Midland --- ### [Midland Alan 48 Pro CB Radio Multi Standard EU Norm & UK40](https://cbradio.co.uk/product/midland-alan-48-plus-cb-radio-multi-standard-eu-norm-uk40/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📻🚗 Midland 48 Pro Multi CB Radio – AM/FM Multi Band – UK EU Mobile Base **Multi Standard • Feature Packed • Built Tough** The **Midland 48 Pro Multi** is a **full-feature CB radio** designed for **mobile and base use**, with **multi-band capability for UK & Europe**. 👉 Ideal for serious users who want more control --- 🔥 **Why Choose This Radio** ✔ Multi Standard (UK & EU Bands) ✔ AM / FM Operation ✔ Heavy Duty Build Quality ✔ Packed with Advanced Features ✔ Ideal for Mobile & Base Use 👉 A proper upgrade from basic radios --- 📦 **What’s Included** ✔ Midland 48 Pro Multi CB Radio ✔ Microphone with Channel Controls ✔ Mounting Bracket & Fixings ✔ Power Lead with Inline Fuse ✔ Microphone Clip ✔ Instruction Manual 👉 Ready to install --- 📡 **Key Features** ✔ 4 Programmable Memory Channels ✔ Scan Function ✔ Dual Watch (Monitor 2 Channels) ✔ Automatic Noise Limiter (ANL) ✔ RF Gain & Mic Gain Controls ✔ CH9 Emergency Channel Access ✔ Last Channel Recall (LCR) ✔ DX / Local Switch ✔ Public Address (PA) Function ✔ Backlit LCD Display ✔ External Speaker Socket --- ⚙️ **Controls & Design** ✔ Tough rotary channel selector ✔ Rubberised illuminated buttons ✔ Heavy duty toggle switches ✔ Mic with UP/DOWN & Lock buttons 👉 Built for real use, not light duty --- 🚙 **Perfect For** 4×4 & Off-Road Trucks Vans Base Stations European Travel 👉 Reliable communication anywhere --- 💡 **Why This Radio Stands Out** ✔ Multi-band for travel across Europe ✔ Strong, durable construction ✔ Easy to use even in tough conditions ✔ Packed with useful real-world features 👉 One of the most popular full-size CB radios --- 🔧 **Installation** ✔ Mount using bracket ✔ Connect power ✔ Attach aerial 👉 Simple setup --- ⚠️ **Important Notes** ❗ 12V operation only ❗ Ensure aerial is tuned (SWR) before transmitting ❗ PA function requires external speaker --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: Aerials SWR meters Power supplies Mounts & accessories --- 🔥 **Order Today** **Full features. Tough build. Ready for anything.** 📻📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/midland-alan-48-plus-cb-radio-multi-standard-eu-norm-uk40/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/midland-alan-48-plus-cb-radio-multi-standard-eu-norm-uk40/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/midland-alan-48-plus-cb-radio-multi-standard-eu-norm-uk40/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/midland-alan-48-plus-cb-radio-multi-standard-eu-norm-uk40/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Midland%20Alan%2048%20Pro%20CB%20Radio%20Multi%20Standard%20EU%20Norm%20%26%20UK40&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmidland-alan-48-plus-cb-radio-multi-standard-eu-norm-uk40%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/midland-alan-48-plus-cb-radio-multi-standard-eu-norm-uk40/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/midland-alan-48-plus-cb-radio-multi-standard-eu-norm-uk40/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/midland-alan-48-plus-cb-radio-multi-standard-eu-norm-uk40/?share=telegram) - **Product categories:** Midland --- ### [Moonraker Micro CB Radio Setup AM FM Mini Springer and Flatbar Mount](https://cbradio.co.uk/product/crt-one-n-cb-radio-setup-am-fm-signal-meter-mini-springer-and-flatbar-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📻🚗 Moonraker Micro CB Radio Starter Kit – Mini Springer & Flat Mount – Ultra Compact **Complete Kit • Ultra Small • Mount Anywhere** This is the **Moonraker Micro – one of the smallest CB radios available**, supplied as a **complete starter kit with aerial, mount and cable**. 👉 So small you can mount it virtually anywhere --- 🔥 **Why Choose This Kit** ✔ One of the Smallest CB Radios Available ✔ Complete Plug & Play Setup ✔ Mini Springer Aerial Included ✔ Flat Bar Mount & Cable ✔ Multi Standard (UK & EU) 👉 Big performance in a tiny package --- 📦 **What’s Included** ✔ Moonraker Micro CB Radio ✔ Mini Springer CB Aerial ✔ Flat Bar Mount ✔ Coax Cable ✔ Mounting Bracket & Power Lead 👉 Everything you need to get on the air --- 📡 **Radio Features** ✔ AM / FM Operation ✔ Multi Norm (UK40 & EU Bands) ✔ 4W Output Power ✔ Manual & Auto Squelch (ASQ) ✔ RF Gain Control ✔ Scan Function ✔ CH9 / CH19 Emergency Channels ✔ Keypad Lock ✔ LCD Display with Signal Meter ✔ External Speaker Socket --- ⚙️ **Specifications** Power Output: 4 Watts Modes: AM / FM Size: 10.2 x 10 x 2.5 cm --- 💡 **Why This Kit Stands Out** ✔ Ultra compact – fits anywhere ✔ Top acts as full heat sink ✔ Solid build quality ✔ Comparable feel to premium radios ✔ Ideal for discreet installs 👉 Perfect where space is limited --- 🚙 **Perfect For** Cars 4x4s Vans Campers Trucks 👉 Ideal for tight dashboards and hidden installs --- 🔧 **Installation** ✔ Fit mount and aerial ✔ Install radio ✔ Connect power 👉 Quick and simple setup --- ⚠️ **Important Notes** ❗ Ensure aerial is tuned (SWR) before transmitting ❗ External speaker recommended if enclosed install ❗ Suitable for mobile use --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: SWR meters Power leads Accessories Aerial upgrades --- 🔥 **Order Today** **Tiny size. Full performance. Built to impress.** 📻📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/crt-one-n-cb-radio-setup-am-fm-signal-meter-mini-springer-and-flatbar-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/crt-one-n-cb-radio-setup-am-fm-signal-meter-mini-springer-and-flatbar-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/crt-one-n-cb-radio-setup-am-fm-signal-meter-mini-springer-and-flatbar-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/crt-one-n-cb-radio-setup-am-fm-signal-meter-mini-springer-and-flatbar-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Moonraker%20Micro%20CB%20Radio%20Setup%20AM%20FM%20Mini%20Springer%20and%20Flatbar%20Mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcrt-one-n-cb-radio-setup-am-fm-signal-meter-mini-springer-and-flatbar-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/crt-one-n-cb-radio-setup-am-fm-signal-meter-mini-springer-and-flatbar-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/crt-one-n-cb-radio-setup-am-fm-signal-meter-mini-springer-and-flatbar-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/crt-one-n-cb-radio-setup-am-fm-signal-meter-mini-springer-and-flatbar-mount/?share=telegram) - **Product categories:** CB Radio Starter Kits --- ### [Head light Height Adjuster Switch 2000 Toyota Landcruiser Amazon 4.7 V8 4.2TD](https://cbradio.co.uk/product/head-light-height-adjuster-switch-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙💡 Toyota Land Cruiser Amazon Headlight Height Adjuster Switch – 100 Series **Genuine Part • Direct Replacement • Ready to Fit** This is a **headlight height adjuster switch** removed from a **Toyota Land Cruiser Amazon (100 Series)** we are currently dismantling. 👉 Proper OEM part – plug and play fit --- 🔥 **Why Choose This Part** ✔ Genuine Toyota Switch ✔ Direct Replacement Fit ✔ Simple Plug & Play ✔ Good Used Condition ✔ Tested & Working 👉 No cheap aftermarket parts --- 📦 **What’s Included** ✔ Headlight Height Adjuster Switch 👉 Ready to install --- 🚙 **Fits** Toyota Land Cruiser Amazon 100 Series 4.7 V8 4.2 TD 👉 Check compatibility if unsure --- 💡 **Why This Stands Out** ✔ Original factory component ✔ Reliable and durable ✔ Straight swap replacement ✔ Removed from working vehicle 👉 Get your adjustment working again --- 🔧 **Installation** ✔ Remove old switch ✔ Plug in replacement ✔ Fit back into dash 👉 Quick and easy job --- ⚠️ **Important Notes** ❗ Used part – may show minor signs of wear ❗ Check part matches yours before purchase ❗ Electrical item – ensure correct fitting --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **More Available** 👉 Check our shop for: Land Cruiser parts Switches & controls Interior components Mechanical parts --- 🔥 **Order Today** **Genuine part. Easy fix. Back to working order.** 🚙💡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/head-light-height-adjuster-switch-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/head-light-height-adjuster-switch-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/head-light-height-adjuster-switch-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/head-light-height-adjuster-switch-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Head%20light%20Height%20Adjuster%20Switch%202000%20Toyota%20Landcruiser%20Amazon%204.7%20V8%204.2TD&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhead-light-height-adjuster-switch-2000-toyota-landcruiser-amazon-4-7-v8-4-2td%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/head-light-height-adjuster-switch-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/head-light-height-adjuster-switch-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/head-light-height-adjuster-switch-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=telegram) - **Product categories:** Land Cruiser --- ### [Toyota Landcruiser amazon Near Passenger Side Rear Boot Window Glass](https://cbradio.co.uk/product/toyota-landcruiser-amazon-near-passenger-side-rear-boot-window-glass/) **Published:** February 13, 2020 **Author:** Jan **Content:** 🚙🪟 Toyota Land Cruiser Amazon Rear Boot Side Window Glass – Near Side – Tinted **Genuine Toyota • Complete Unit • Ready to Fit** This is a **genuine Toyota rear boot side window glass** for the **Land Cruiser Amazon (100 Series)**, removed from a vehicle we are currently dismantling. 👉 Proper OEM part – not aftermarket --- 🔥 **Why Choose This Part** ✔ Genuine Toyota Glass ✔ Tinted Factory Finish ✔ Complete with Latch ✔ Direct Replacement Fit ✔ Good Used Condition 👉 Save vs new parts --- 📦 **What’s Included** ✔ Rear Boot Side Window Glass (Near Side) ✔ Latch Mechanism Included 👉 Ready to install --- 🚙 **Fits** Toyota Land Cruiser Amazon (100 Series) 👉 Near passenger side rear boot window --- 💡 **Why This Stands Out** ✔ Original factory glass ✔ Proper fit and finish ✔ Includes latch – no extra parts needed ✔ Removed from working vehicle 👉 No cheap pattern parts --- 🔧 **Installation** ✔ Remove old glass ✔ Fit replacement unit ✔ Secure latch mechanism 👉 Straight swap --- ⚠️ **Important Notes** ❗ Used part – may show minor marks consistent with use ❗ Check compatibility before purchase ❗ Collection or careful delivery recommended --- 📦 **Dispatch / Collection** ✔ UK based seller ✔ Secure packaging for transport ✔ Collection welcome --- 💬 **More Available** 👉 Check our shop for: Land Cruiser parts Interior & exterior panels Mechanical parts Accessories --- 🔥 **Order Today** **Genuine part. Proper fit. Ready to go.** 🚙 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-amazon-near-passenger-side-rear-boot-window-glass/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-amazon-near-passenger-side-rear-boot-window-glass/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-amazon-near-passenger-side-rear-boot-window-glass/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-amazon-near-passenger-side-rear-boot-window-glass/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20Landcruiser%20amazon%20Near%20Passenger%20Side%20Rear%20Boot%20Window%20Glass&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-amazon-near-passenger-side-rear-boot-window-glass%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-amazon-near-passenger-side-rear-boot-window-glass/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-amazon-near-passenger-side-rear-boot-window-glass/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-amazon-near-passenger-side-rear-boot-window-glass/?share=telegram) - **Product categories:** Land Cruiser --- ### [4 x pl259 UHF coax connector plugs for rg58 coaxial cable](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-connector-plugs-for-rg58-coaxial-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 4x PL259 UHF Connectors – RG58 Coax Plugs – Solder Type – CB HAM Radio **4 Pack • Quality Build • Easy to Solder** This is a **pack of 4 PL259 UHF connectors**, designed for **RG58 coax cable** and ideal for **CB & HAM radio setups**. 👉 Perfect for making or repairing your own leads --- 🔥 **Why Choose These Connectors** ✔ Pack of 4 PL259 Plugs ✔ Designed for RG58 Coax ✔ Solder Type Connection ✔ Brown Inserts – Heat Resistant ✔ Strong, Reliable Fit 👉 No cheap melting inserts here --- 📦 **What’s Included** ✔ 4x PL259 UHF Connectors 👉 Ready for soldering --- 📡 **Perfect For** CB Radio HAM / Amateur Radio Coax Cable Builds Repairs & Replacements 👉 Essential for any radio setup --- ⚙️ **Specifications** Connector Type: PL259 (UHF) Cable Type: RG58 Connection: Solder Type Insert: Brown Heat Resistant --- 💡 **Why These Stand Out** ✔ Brown inserts won’t melt during soldering ✔ Solid, reliable connection ✔ Easy to work with ✔ Better quality than cheap alternatives 👉 Get it right first time --- 🔧 **Installation** ✔ Strip cable ✔ Solder centre pin ✔ Secure outer braid 👉 Simple and effective --- ⚠️ **Important Notes** ❗ Designed for RG58 cable ❗ Requires soldering ❗ Ensure good connection for best performance --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: Coax cables Adaptors Aerials Radio accessories --- 🔥 **Order Today** **Proper connectors. No melt. Built to last.** 🔌📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-connector-plugs-for-rg58-coaxial-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-connector-plugs-for-rg58-coaxial-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-connector-plugs-for-rg58-coaxial-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-connector-plugs-for-rg58-coaxial-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20x%20pl259%20UHF%20coax%20connector%20plugs%20for%20rg58%20coaxial%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-x-pl259-uhf-coax-connector-plugs-for-rg58-coaxial-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-connector-plugs-for-rg58-coaxial-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-connector-plugs-for-rg58-coaxial-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-connector-plugs-for-rg58-coaxial-cable/?share=telegram) - **Product categories:** PL259 Connectors --- ### [DV patch lead 4m new style Sirio Male (PIN) DV to PL259 fits new Sirio base](https://cbradio.co.uk/product/dv-patch-lead-4m-new-style-sirio-male-pin-dv-to-pl259-fits-new-sirio-base/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 4m DV Patch Lead – Sirio New Male DV (Pin) to PL259 – RG58 Coax Cable **New Sirio Type • Custom Made • Ready to Use** This is a **4 metre DV patch lead**, built with the **new Sirio male DV (pin) connector** to suit the latest Sirio DV mounts. 👉 No more mismatch issues with old-style cables --- 🔥 **Why Choose This Lead** ✔ New Style Sirio Male DV (Pin) Plug ✔ PL259 Connector for Radio End ✔ 4 Metre RG58 Low Loss Cable ✔ Custom Made – Not Old Stock ✔ Plug & Play Setup 👉 Designed for the latest Sirio bases --- 📦 **What’s Included** ✔ 4m DV Patch Lead (New Male DV to PL259) 👉 Ready to connect --- 📡 **Perfect For** Sirio DV Mounts (New Type) CB Radio Installations HAM Radio Setups Mobile Installations 👉 Ideal upgrade for newer Sirio systems --- ⚙️ **Specifications** Cable Length: 4 Metres Cable Type: RG58 Low Loss Connector 1: Sirio DV Male (Pin – New Type) Connector 2: PL259 --- 💡 **Why This Lead Stands Out** ✔ Matches new Sirio DV mount design ✔ Avoids issues with older DV cables ✔ Proper quality cable – not cheap imports ✔ Built by people who know the difference 👉 Get the right lead first time --- 🔧 **Installation** ✔ Connect DV end to mount ✔ Connect PL259 to radio ✔ Route cable neatly 👉 Simple and effective --- ⚠️ **Important Notes** ❗ Designed for **new Sirio DV mounts (male pin type)** ❗ Not compatible with older female DV mounts ❗ Check your mount type before purchase --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **More Available** 👉 Check our shop for: DV mounts Aerials Coax cables SWR meters --- 🔥 **Order Today** **Right fit. No hassle. Built properly.** 📡🔌 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/dv-patch-lead-4m-new-style-sirio-male-pin-dv-to-pl259-fits-new-sirio-base/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/dv-patch-lead-4m-new-style-sirio-male-pin-dv-to-pl259-fits-new-sirio-base/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/dv-patch-lead-4m-new-style-sirio-male-pin-dv-to-pl259-fits-new-sirio-base/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/dv-patch-lead-4m-new-style-sirio-male-pin-dv-to-pl259-fits-new-sirio-base/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DV%20patch%20lead%204m%20new%20style%20Sirio%20Male%20%28PIN%29%20DV%20to%20PL259%20fits%20new%20Sirio%20base&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdv-patch-lead-4m-new-style-sirio-male-pin-dv-to-pl259-fits-new-sirio-base%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/dv-patch-lead-4m-new-style-sirio-male-pin-dv-to-pl259-fits-new-sirio-base/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/dv-patch-lead-4m-new-style-sirio-male-pin-dv-to-pl259-fits-new-sirio-base/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/dv-patch-lead-4m-new-style-sirio-male-pin-dv-to-pl259-fits-new-sirio-base/?share=telegram) - **Product categories:** Coax Cable --- ### [Moonraker micro CB Radio Kit AM FM UK EU 80 Channel Mirror Mount and Springer](https://cbradio.co.uk/product/crt-one-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📻🚙 Moonraker Micro CB Radio Starter Kit – 80 Channel AM/FM – Springer & Mirror Mount **Complete Kit • Ultra Compact • Ready to Install** This is a **complete CB starter kit** built around the **Moonraker Micro ultra compact radio**, supplied with **aerial and heavy duty mount**. 👉 Fits where other radios simply won’t --- 🔥 **Why Choose This Kit** ✔ Complete Plug & Play Setup ✔ Ultra Compact Moonraker Micro Radio ✔ Multi Standard (UK & EU – 80 Channels) ✔ Mini Springer Aerial Included ✔ Heavy Duty Mirror / Roof Mount 👉 Everything you need in one box --- 📦 **What’s Included** ✔ Moonraker Micro CB Radio ✔ Mini Springer CB Aerial ✔ Heavy Duty Mirror / Roof Bar Clamp Mount ✔ Mounting Bracket & Power Lead 👉 Ready for a clean install --- 📡 **Radio Features** ✔ AM / FM Operation ✔ 80 Channels (UK & EU Bands) ✔ 4W Output Power ✔ Manual & Auto Squelch (ASQ) ✔ RF Gain Control ✔ Scan Function ✔ CH9 / CH19 Emergency Channels ✔ Keypad Lock ✔ LCD Display ✔ External Speaker Socket 👉 Simple, effective communication --- ⚙️ **Specifications** Frequency: UK & EU Multi Norm Power Output: 4 Watts Modes: AM / FM Size: 10.2 x 10 x 2.5 cm --- 🚙 **Perfect For** Cars 4×4 & Off-Road Vehicles Vans & Campers Trucks Tight dashboard installs 👉 Ideal where space is limited --- 💡 **Why This Kit Stands Out** ✔ One of the smallest CB radios available ✔ Complete kit – no extras needed ✔ Strong, flexible springer aerial ✔ Heavy duty mount for real use ✔ Designed for quick installs 👉 Get on the air fast --- 🔧 **Installation** ✔ Fit mount and aerial ✔ Install radio ✔ Connect power 👉 Straightforward setup --- ⚠️ **Important Notes** ❗ Ensure aerial is tuned (SWR) before transmitting ❗ External speaker recommended if mounting in enclosed spaces ❗ Suitable for mobile installations --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: SWR meters Power leads Accessories Aerial upgrades --- 🔥 **Order Today** **Compact size. Full kit. Get on the air.** 📻📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/crt-one-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/crt-one-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/crt-one-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/crt-one-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Moonraker%20micro%20CB%20Radio%20Kit%20AM%20FM%20UK%20EU%2080%20Channel%20%20Mirror%20Mount%20and%20Springer&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcrt-one-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/crt-one-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/crt-one-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/crt-one-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=telegram) - **Product categories:** CB Radio Starter Kits --- ### [bnc to so239 adaptor antenna adapter for scanner HAM radio](https://cbradio.co.uk/product/bnc-to-so239-adaptor-antenna-adapter-for-scanner-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 BNC to SO239 Adapter – BNC Male to SO239 Female – CB HAM Scanner **Compact • Reliable • Easy Fit** This **BNC to SO239 adaptor** allows you to **connect PL259 plugs to a BNC socket**, making it ideal for **scanner, CB and HAM radio setups**. 👉 Simple solution for mixed connector setups --- 🔥 **Why Choose This Adapter** ✔ BNC Male to SO239 Female ✔ Converts BNC Socket to PL259 Fit ✔ Compact & Durable Design ✔ Ideal for Radio & Scanner Use ✔ Quick & Easy Connection 👉 No need to change cables --- 📦 **What’s Included** ✔ BNC Male to SO239 Female Adapter 👉 Ready to use --- 📡 **Perfect For** CB Radios HAM / Amateur Radio Scanners Test Equipment 👉 Ideal for adapting aerial connections --- ⚙️ **Specifications** Connector 1: BNC Male Connector 2: SO239 Female Compatibility: PL259 Plugs --- 💡 **Why This Adapter Stands Out** ✔ Solid, reliable connection ✔ Clean signal transfer ✔ Compact and easy to carry ✔ Essential for mixed setups 👉 A must-have adapter --- 🔧 **Installation** ✔ Plug into BNC socket ✔ Connect PL259 cable ✔ Ready to go 👉 Quick and simple --- ⚠️ **Important Notes** ❗ Ensure secure connection for best performance ❗ Suitable for radio and RF applications ❗ Check connector types before purchase --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: Coax cables Adaptors Aerials Radio accessories --- 🔥 **Order Today** **Simple fix. Solid connection. No hassle.** 📡🔌 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/bnc-to-so239-adaptor-antenna-adapter-for-scanner-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/bnc-to-so239-adaptor-antenna-adapter-for-scanner-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/bnc-to-so239-adaptor-antenna-adapter-for-scanner-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/bnc-to-so239-adaptor-antenna-adapter-for-scanner-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20bnc%20to%20so239%20adaptor%20antenna%20adapter%20for%20scanner%20HAM%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fbnc-to-so239-adaptor-antenna-adapter-for-scanner-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/bnc-to-so239-adaptor-antenna-adapter-for-scanner-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/bnc-to-so239-adaptor-antenna-adapter-for-scanner-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/bnc-to-so239-adaptor-antenna-adapter-for-scanner-ham-radio/?share=telegram) - **Product categories:** RF Adaptors --- ### [2" inch lift kit STD Duty for Toyota Land-Cruiser 100 Amazon AHC replacement](https://cbradio.co.uk/product/2-inch-lift-kit-std-duty-for-toyota-land-cruiser-100-amazon-ahc-replacement/) **Published:** February 13, 2020 **Author:** Jan **Content:** **\*\*\*\*\* PLEASE RING FIRST TO CHECK STOCK LEVELS BEFORE PURCHASING\*\*\*\*\*** ## 🚙🔧 Toyota Land Cruiser 100 (Amazon) 2″ Suspension Lift Kit – AHC Conversion Kit **Complete Kit • Heavy Duty • Built for Reliability** ❗ **PLEASE RING FIRST TO CHECK STOCK BEFORE PURCHASING** --- This is a **complete 2″ suspension lift kit** for the **Toyota Land Cruiser 100 Series (Amazon)**, designed to **replace the problematic AHC system** with a **reliable spring & shock setup**. 👉 Built to keep your Land Cruiser working properly for years --- 🔥 **Why Choose This Kit** ✔ Full AHC Delete / Conversion Kit ✔ 2″ Lift for Improved Clearance ✔ Front & Rear Suspension Included ✔ Reliable Spring & Shock Setup ✔ Built for Long-Term Use 👉 Say goodbye to expensive AHC failures --- 📦 **What’s Included** ✔ Rear Coil Springs ✔ Rear Shock Absorbers ✔ Front Torsion Bars ✔ Front Shock Absorbers 👉 Complete conversion kit --- 🚙 **Perfect For** Toyota Land Cruiser 100 Series (Amazon) 4.7 V8 Models Off-Road Builds Work Vehicles Owners wanting reliability over complexity --- 📡 **Why Convert from AHC** The original **AHC (Active Height Control)** system is great when new… but as these vehicles age: ❌ Sensors fail ❌ Spheres lose pressure ❌ Pumps fail ❌ Costs quickly add up 👉 This kit replaces it with a **simple, reliable system that just works** --- ⚙️ **Specifications** Lift: Approx 2 Inches Front: Torsion Bars + Shocks Rear: Coil Springs + Shocks --- 💡 **Why This Kit Stands Out** ✔ Removes complex hydraulic system ✔ No more expensive AHC repairs ✔ Strong, dependable setup ✔ Ideal for off-road and daily use ✔ Proven conversion solution 👉 Built for real-world Land Cruiser use --- 🔧 **Installation** ✔ Remove AHC system ✔ Fit torsion bars & front shocks ✔ Install rear springs & shocks 👉 Professional fitting recommended --- ⚠️ **Important Notes** ❗ **This listing is for 4.7 V8 models** ❗ Please confirm engine size when ordering ❗ No height adjustment (fixed suspension setup) ❗ Designed as AHC replacement --- 📦 **Shipping Info** 📦 Supplied in 3 boxes: - Box 1: 14kg – 55 x 20 x 18cm - Box 2: 17.2kg – 124 x 14 x 7cm - Box 3: 19kg – 63 x 48 x 25cm --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Heavy duty components --- 💬 **Need Help?** 👉 Contact us for: Engine compatibility Lift options Advice on conversion --- 🔥 **Order Today** **Ditch the AHC. Go reliable. Built to last.** 🚙🔧 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-inch-lift-kit-std-duty-for-toyota-land-cruiser-100-amazon-ahc-replacement/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-inch-lift-kit-std-duty-for-toyota-land-cruiser-100-amazon-ahc-replacement/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-inch-lift-kit-std-duty-for-toyota-land-cruiser-100-amazon-ahc-replacement/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-inch-lift-kit-std-duty-for-toyota-land-cruiser-100-amazon-ahc-replacement/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%22%20inch%20lift%20kit%20STD%20Duty%20for%20Toyota%20Land-Cruiser%20100%20Amazon%20AHC%20replacement&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-inch-lift-kit-std-duty-for-toyota-land-cruiser-100-amazon-ahc-replacement%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-inch-lift-kit-std-duty-for-toyota-land-cruiser-100-amazon-ahc-replacement/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-inch-lift-kit-std-duty-for-toyota-land-cruiser-100-amazon-ahc-replacement/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-inch-lift-kit-std-duty-for-toyota-land-cruiser-100-amazon-ahc-replacement/?share=telegram) - **Product categories:** Land Cruiser --- ### [SIRIO T-27 (Mini DV-27) Ultra compact CB radio Aerial Antenna](https://cbradio.co.uk/product/sirio-t-27-mini-dv-27-ultra-compact-cb-radio-aerial-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚗📡 Sirio T-27 Mini DV27 CB Aerial Kit – Ultra Compact Antenna – 4m RG58 **Compact • Discreet • Complete Kit** The **Sirio T-27 (Mini DV-27)** is a **compact CB aerial kit**, perfect where you need a **low profile install without sacrificing performance**. 👉 Basically a **mini DV27 with mount and cable included** --- 🔥 **Why Choose This Aerial** ✔ Ultra Compact Design ✔ Complete Kit (Mount + Cable) ✔ Ideal for Discreet Installations ✔ 360° Omnidirectional Coverage ✔ Trusted Sirio Quality 👉 Perfect when space is limited --- 📦 **What’s Included** ✔ Sirio T-27 CB Aerial ✔ Mount (N-Type Base) ✔ 4m RG58 Coax Cable ❗ **No PL259 plug fitted (standard for Sirio kits)** --- 📡 **Performance Highlights** Frequency Range: 26.5 – 28.5 MHz Radiation: 360° Omnidirectional Polarisation: Vertical Bandwidth: 400 KHz (SWR ≤ 2:1) 👉 Solid performance in a compact size --- ⚙️ **Specifications** Type: Central Loaded CB Antenna Power Handling: - 20W Continuous (CW) - 100W Short Time (CW) Cable: 4m RG58 Mount: N-Type Height: Approx 555mm Weight: Approx 330g Materials: Brass / Copper / Glass Fibre / Stainless Steel --- 💡 **Why This Aerial Stands Out** ✔ Small but effective ✔ Clean, low-profile install ✔ Quality materials throughout ✔ Ideal for vehicles where large aerials aren’t practical 👉 Discreet but capable --- 🚙 **Perfect For** Cars Vans 4x4s Trucks Discreet installs --- 🔧 **Installation** ✔ Mount in suitable position ✔ Route cable ✔ Fit PL259 plug (if required) ✔ Connect to radio 👉 Simple setup --- ⚠️ **Important Notes** ❗ No PL259 connector supplied ❗ Lower power handling than full-size aerials ❗ Best suited for compact / low-profile installs --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: PL259 connectors Coax cable SWR meters CB radios --- 🔥 **Order Today** **Compact size. Clean install. Trusted performance.** 📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-t-27-mini-dv-27-ultra-compact-cb-radio-aerial-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-t-27-mini-dv-27-ultra-compact-cb-radio-aerial-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-t-27-mini-dv-27-ultra-compact-cb-radio-aerial-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-t-27-mini-dv-27-ultra-compact-cb-radio-aerial-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SIRIO%20T-27%20%28Mini%20DV-27%29%20Ultra%20compact%20CB%20radio%20Aerial%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-t-27-mini-dv-27-ultra-compact-cb-radio-aerial-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-t-27-mini-dv-27-ultra-compact-cb-radio-aerial-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-t-27-mini-dv-27-ultra-compact-cb-radio-aerial-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-t-27-mini-dv-27-ultra-compact-cb-radio-aerial-antenna/?share=telegram) - **Product categories:** CB Aerials with mount, Sirio cb Antennas --- ### [Midland alan 42 DS Hand-held CB Radio Multi Standard FM 40 UK 40 EU](https://cbradio.co.uk/product/midland-alan-42-ds-hand-held-cb-radio-multi-standard-fm-40-uk-40-eu/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📻🚶 Midland Alan 42DS Handheld CB Radio – Multi Standard – AM/FM Portable **Handheld • Multi Region • Versatile Use** The **Midland Alan 42DS** is a **compact handheld CB radio**, now updated with **digital squelch**, making it even easier to use on the move. 👉 Perfect for **4×4, camping, hiking & general use** --- 🔥 **Why Choose This Radio** ✔ Handheld & Portable ✔ Multi Standard (UK & EU Bands) ✔ Digital Squelch System ✔ Can Be Used In-Car or Portable ✔ Trusted Midland Quality 👉 One radio, multiple uses --- 📦 **What’s Included** ✔ Midland Alan 42DS Radio ✔ Battery Holder (6 or 8 AA setup) ✔ 19cm BNC Antenna ✔ Antenna Adapter ✔ Car Adaptor Kit (DC Converter + SO239 Lead) ✔ UK Mains Charger 👉 Ready for portable or vehicle use --- 📡 **Key Features** ✔ 40 Channels ✔ AM / FM Operation ✔ Digital Squelch (DS) ✔ Large Backlit Display ✔ Multi Region Band Selection ✔ External Antenna Capability ✔ Internal Speaker --- ⚙️ **Specifications** Frequency Range: 26–27 MHz Output Power: 4 Watts Audio Output: 0.5W Modulation: AM / FM Power: 6 or 8 x AA Batteries --- 🚙 **Perfect For** 4×4 & Off-Road Use Camping & Caravanning Hiking Farm Use Boat / Marine Use Home Backup Radio 👉 Take it anywhere --- 💡 **Why This Radio Stands Out** ✔ True portable CB solution ✔ Switch between European bands easily ✔ Use handheld or connect to vehicle aerial ✔ Compact but capable 👉 Flexibility you don’t get with fixed radios --- 🔧 **How It Works** ✔ Use with AA batteries for portable use ✔ Plug into vehicle adaptor for mobile use ✔ Connect external aerial for improved range 👉 Simple and versatile --- ⚠️ **Important Notes** ❗ **AA batteries NOT included** ❗ Handheld aerial gives limited range compared to full-size antennas ❗ For best range, use with external aerial via adaptor --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **Complete Your Setup** 👉 Check our shop for: Mobile aerials SWR meters Mounts Accessories --- 🔥 **Order Today** **Portable. Versatile. Ready when you are.** 📻📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/midland-alan-42-ds-hand-held-cb-radio-multi-standard-fm-40-uk-40-eu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/midland-alan-42-ds-hand-held-cb-radio-multi-standard-fm-40-uk-40-eu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/midland-alan-42-ds-hand-held-cb-radio-multi-standard-fm-40-uk-40-eu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/midland-alan-42-ds-hand-held-cb-radio-multi-standard-fm-40-uk-40-eu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Midland%20alan%2042%20DS%20Hand-held%20CB%20Radio%20Multi%20Standard%20FM%2040%20UK%2040%20EU&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmidland-alan-42-ds-hand-held-cb-radio-multi-standard-fm-40-uk-40-eu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/midland-alan-42-ds-hand-held-cb-radio-multi-standard-fm-40-uk-40-eu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/midland-alan-42-ds-hand-held-cb-radio-multi-standard-fm-40-uk-40-eu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/midland-alan-42-ds-hand-held-cb-radio-multi-standard-fm-40-uk-40-eu/?share=telegram) - **Product categories:** CB radio Hand Helds, Midland --- ### [Air band receiving antenna 117 To 140 MHz home base airband aerial](https://cbradio.co.uk/product/air-band-receiving-antenna-117-to-140-mhz-home-base-airband-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ✈️📡 Airband Base Antenna – 117–140MHz – Homebase Aircraft Receiving Aerial **Airband • Lightweight • Easy Install** This is a **homebase airband antenna**, designed to **boost your aircraft listening range** with a simple, effective setup. 👉 Ideal for aviation enthusiasts and scanner users --- 🔥 **Why Choose This Antenna** ✔ Tuned for Airband (117–140MHz) ✔ Lightweight & Easy to Install ✔ Fibreglass & Stainless Steel Build ✔ Excellent Reception Performance ✔ Ideal for Home Use 👉 Hear more aircraft, clearer --- 📦 **What’s Included** ✔ Airband Base Antenna 👉 Ready to mount --- 📡 **Performance Highlights** Frequency: 117–140MHz Gain: 2.15 dBi Design: Vertical Pre-Tuned 👉 Optimised for airband listening --- ⚙️ **Specifications** Length: 80cm Radials: 4 x 64cm Mast Size: Up to 51mm (2″) Connector: N-Type --- 💡 **Why This Antenna Stands Out** ✔ Designed specifically for airband ✔ Strong, weather-resistant construction ✔ Compact and discreet ✔ Great upgrade from standard scanner aerials 👉 Improve your listening instantly --- 🔧 **Installation** ✔ Mount on pole or mast ✔ Connect coax cable (N-Type) ✔ Position for best reception 👉 Simple home setup --- ⚠️ **Important Notes** ❗ Best used outdoors for maximum range ❗ Requires N-Type coax cable ❗ Suitable for receiving applications --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: Scanner radios Coax cables Mounting kits Connectors --- 🔥 **Order Today** **Better range. Clear signals. Easy setup.** ✈️📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/air-band-receiving-antenna-117-to-140-mhz-home-base-airband-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/air-band-receiving-antenna-117-to-140-mhz-home-base-airband-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/air-band-receiving-antenna-117-to-140-mhz-home-base-airband-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/air-band-receiving-antenna-117-to-140-mhz-home-base-airband-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Air%20band%20receiving%20antenna%20117%20To%20140%20MHz%20home%20base%20airband%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fair-band-receiving-antenna-117-to-140-mhz-home-base-airband-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/air-band-receiving-antenna-117-to-140-mhz-home-base-airband-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/air-band-receiving-antenna-117-to-140-mhz-home-base-airband-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/air-band-receiving-antenna-117-to-140-mhz-home-base-airband-aerial/?share=telegram) - **Product categories:** Scanners and Aerials --- ### [Scan King S-2000 Vertical Scanner antenna RX 0-2000MHz Base / loft aerial](https://cbradio.co.uk/product/scan-king-s-2000-vertical-scanner-antenna-rx-0-2000mhz-base-loft-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔭 ScanKing SE15000 Wideband Scanner Antenna – 0–2000MHz – Compact Base / Loft Aerial **Wideband • Compact • Easy Install** The **ScanKing SE15000** is a **great all-round scanner antenna**, designed for **wideband reception** in a compact, discreet form. 👉 Perfect for home, loft or outdoor installs --- 🔥 **Why Choose This Antenna** ✔ Wideband Reception (0–2000MHz) ✔ Compact & Discreet Design ✔ Easy to Install ✔ Suitable for Loft or Outdoor Use ✔ Reliable All-Round Performance 👉 One antenna for multiple bands --- 📦 **What’s Included** ✔ ScanKing SE15000 Antenna 👉 Ready to mount --- 📡 **Performance Highlights** Frequency Range: 0–2000MHz (Receive Only) Design: Capacitor Loaded Vertical Coils: 4 x Capacitor Loaded Sections 👉 Excellent wideband coverage --- ⚙️ **Specifications** Length: 100cm Radials: 3 x 30cm Mast Size: Up to 51mm (2″) Connector: N-Type --- 💡 **Why This Antenna Stands Out** ✔ Compact size with wide coverage ✔ Discreet for loft installations ✔ Covers multiple services with one aerial ✔ Proven scanner performance 👉 Ideal for general listening --- 🔧 **Installation** ✔ Mount on pole or mast ✔ Connect coax (N-Type) ✔ Position for best reception 👉 Simple setup indoors or outdoors --- ⚠️ **Important Notes** ❗ Receive only (not for transmitting) ❗ Requires N-Type coax connection ❗ Best results when mounted high --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: Coax cables Connectors Scanner radios Mounting kits --- 🔥 **Order Today** **Wide coverage. Compact design. Easy setup.** 📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/scan-king-s-2000-vertical-scanner-antenna-rx-0-2000mhz-base-loft-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/scan-king-s-2000-vertical-scanner-antenna-rx-0-2000mhz-base-loft-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/scan-king-s-2000-vertical-scanner-antenna-rx-0-2000mhz-base-loft-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/scan-king-s-2000-vertical-scanner-antenna-rx-0-2000mhz-base-loft-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Scan%20King%20S-2000%20Vertical%20Scanner%20antenna%20RX%200-2000MHz%20Base%20%2F%20loft%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fscan-king-s-2000-vertical-scanner-antenna-rx-0-2000mhz-base-loft-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/scan-king-s-2000-vertical-scanner-antenna-rx-0-2000mhz-base-loft-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/scan-king-s-2000-vertical-scanner-antenna-rx-0-2000mhz-base-loft-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/scan-king-s-2000-vertical-scanner-antenna-rx-0-2000mhz-base-loft-aerial/?share=telegram) - **Product categories:** Scanners and Aerials --- ### [CRT Millenium V3 ultra compact CB radio 40 UK 40 EU channel AM FM multi-standard](https://cbradio.co.uk/product/crt-millenium-v3-ultra-compact-cb-radio-40-uk-40-eu-channel-am-fm-multi-standard/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📻🚗 CRT Millenium V3 Ultra Compact CB Radio – Multi Standard – AM/FM **Ultra Compact • Detachable Mic • Feature Packed** ❗ **PLEASE NOTE:** This model is now discontinued and replaced by the **PNI Escort 6500 (same unit/spec)** --- This **CRT Millenium V3** is a **super compact CB radio** packed with features, perfect for installs where **space is limited**. 👉 Small size, big performance --- 🔥 **Why Choose This Radio** ✔ Ultra Compact Design ✔ Multi-Standard (UK & EU Bands) ✔ Detachable Microphone ✔ Quick Disconnect Bracket ✔ Full Feature Set 👉 Ideal for tight installs --- 📦 **What’s Included** ✔ CRT Millenium V3 CB Radio ✔ Detachable Microphone ✔ Quick Release Mounting Bracket ✔ Power Lead 👉 Ready to install --- 📡 **Key Features** ✔ 40 UK + 40 EU Channels ✔ AM / FM Operation ✔ S-Meter Display ✔ Manual & Auto Squelch (ASQ) ✔ RF Gain Control ✔ Channel Scan Function ✔ Keypad Lock ✔ Instant CH9 / CH19 Access ✔ Blue LCD Display ✔ External Speaker Socket (3.5mm) --- ⚙️ **Specifications** Power Output: 4W AM / 4W FM Modes: AM / FM Bands: Multi-Standard EU Size: 120 x 110 x 27 mm Weight: 470g --- 💡 **Why This Radio Stands Out** ✔ One of the smallest CB radios available ✔ Detachable mic for flexible installs ✔ Quick release bracket for easy removal ✔ Packed with useful features 👉 Perfect where space is tight --- 🚙 **Perfect For** Cars 4x4s Vans Trucks Compact dashboards --- 🔧 **Installation** ✔ Mount using quick release bracket ✔ Connect power ✔ Fit microphone 👉 Quick and simple setup --- ⚠️ **Important Notes** ❗ Discontinued model – replaced by **PNI Escort 6500** ❗ Limited availability ❗ Ensure correct aerial setup before use --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: Aerial kits Mounts SWR meters Power supplies --- 🔥 **Order Today** **Compact size. Full features. Built to perform.** 📻📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/crt-millenium-v3-ultra-compact-cb-radio-40-uk-40-eu-channel-am-fm-multi-standard/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/crt-millenium-v3-ultra-compact-cb-radio-40-uk-40-eu-channel-am-fm-multi-standard/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/crt-millenium-v3-ultra-compact-cb-radio-40-uk-40-eu-channel-am-fm-multi-standard/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/crt-millenium-v3-ultra-compact-cb-radio-40-uk-40-eu-channel-am-fm-multi-standard/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CRT%20Millenium%20V3%20ultra%20compact%20CB%20radio%2040%20UK%2040%20EU%20channel%20AM%20FM%20multi-standard&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcrt-millenium-v3-ultra-compact-cb-radio-40-uk-40-eu-channel-am-fm-multi-standard%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/crt-millenium-v3-ultra-compact-cb-radio-40-uk-40-eu-channel-am-fm-multi-standard/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/crt-millenium-v3-ultra-compact-cb-radio-40-uk-40-eu-channel-am-fm-multi-standard/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/crt-millenium-v3-ultra-compact-cb-radio-40-uk-40-eu-channel-am-fm-multi-standard/?share=telegram) - **Product categories:** CRT --- ### [lead free solder wire 10g tube of 0.6mm 5 meter length](https://cbradio.co.uk/product/lead-free-solder-wire-10g-tube-of-0-6mm-5-meter-length/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🔥 Lead Free Solder Wire – 0.6mm – 10g Tube – Approx 5 Metres **Lead Free • Fine Gauge • Easy to Use** This is a **10g tube of lead-free solder wire**, ideal for **electronics, connectors and small soldering jobs**. 👉 Perfect for precise work with a clean finish --- 🔥 **Why Choose This Solder** ✔ Lead Free ✔ Fine 0.6mm Diameter ✔ Easy Flow for Small Work ✔ Ideal for Electronics & Connectors ✔ Approx 5 Metres Length 👉 Great for detailed soldering jobs --- 📦 **What’s Included** ✔ 10g Tube of Lead-Free Solder Wire 👉 Ready to use --- 📡 **Perfect For** Electronics Repairs Connector Soldering CB / HAM Radio Work DIY Projects Fine Electrical Work --- ⚙️ **Specifications** Type: Lead-Free Solder Diameter: 0.6mm Weight: 10g Length: Approx 5 Metres --- 💡 **Why This Stands Out** ✔ Fine gauge for precision work ✔ Clean, reliable joints ✔ Easy to handle and control ✔ Ideal for small components 👉 Get neat, professional results --- 🔧 **Usage** ✔ Heat joint ✔ Apply solder ✔ Allow to flow and set 👉 Simple and effective --- ⚠️ **Important Notes** ❗ Use suitable soldering iron temperature ❗ Ensure good ventilation when soldering ❗ Store in a dry place --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: Soldering irons Connectors Cables Radio accessories --- 🔥 **Order Today** **Clean joints. Easy work. Reliable results.** 🔧 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/lead-free-solder-wire-10g-tube-of-0-6mm-5-meter-length/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/lead-free-solder-wire-10g-tube-of-0-6mm-5-meter-length/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/lead-free-solder-wire-10g-tube-of-0-6mm-5-meter-length/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/lead-free-solder-wire-10g-tube-of-0-6mm-5-meter-length/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20lead%20free%20solder%20wire%2010g%20tube%20of%200.6mm%205%20meter%20length&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flead-free-solder-wire-10g-tube-of-0-6mm-5-meter-length%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/lead-free-solder-wire-10g-tube-of-0-6mm-5-meter-length/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/lead-free-solder-wire-10g-tube-of-0-6mm-5-meter-length/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/lead-free-solder-wire-10g-tube-of-0-6mm-5-meter-length/?share=telegram) - **Product categories:** Tools --- ### [XLR panel chassis mount male 3 receptacle P soldering connection](https://cbradio.co.uk/product/xlr-panel-chassis-mount-male-3-receptacle-p-soldering-connection/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔌 XLR Panel Mount Male 3 Pin Connector – Chassis Socket – Solder Type **3 Pin • Panel Mount • Solid Connection** This is a **3 pin XLR male panel mount connector**, designed for **chassis installation** in audio and equipment setups. 👉 Ideal for repairs, custom builds and professional installs --- 🔥 **Why Choose This Connector** ✔ Standard 3 Pin XLR Male ✔ Panel / Chassis Mount Design ✔ Solder Connection Type ✔ Secure & Reliable Fit ✔ Compact and Durable 👉 Proper connection for audio setups --- 📦 **What’s Included** ✔ 3 Pin XLR Male Panel Mount Connector 👉 Ready for installation --- 📡 **Perfect For** Audio Equipment Microphone Connections Amplifiers & Mixers Custom Panels & Builds Repairs & Replacements --- ⚙️ **Specifications** Connector Type: XLR Male Pins: 3 Pin Mount Type: Panel / Chassis Mount Connection Type: Solder Housing: Metal / Durable Construction --- 💡 **Why This Connector Stands Out** ✔ Solid panel fit – no movement ✔ Clean, professional finish ✔ Reliable solder connections ✔ Built for long-term use 👉 Get a proper connection every time --- 🔧 **Installation** ✔ Mount into panel ✔ Solder wires to pins ✔ Secure in place 👉 Simple and effective --- ⚠️ **Important Notes** ❗ Requires soldering ❗ Ensure correct pin wiring ❗ Suitable for audio applications --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: XLR connectors Audio plugs Adaptors Cables & accessories --- 🔥 **Order Today** **Clean connection. Professional finish. Built to last.** 🎤🔌 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/xlr-panel-chassis-mount-male-3-receptacle-p-soldering-connection/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/xlr-panel-chassis-mount-male-3-receptacle-p-soldering-connection/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/xlr-panel-chassis-mount-male-3-receptacle-p-soldering-connection/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/xlr-panel-chassis-mount-male-3-receptacle-p-soldering-connection/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20XLR%20panel%20chassis%20mount%20male%203%20receptacle%20P%20soldering%20connection&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fxlr-panel-chassis-mount-male-3-receptacle-p-soldering-connection%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/xlr-panel-chassis-mount-male-3-receptacle-p-soldering-connection/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/xlr-panel-chassis-mount-male-3-receptacle-p-soldering-connection/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/xlr-panel-chassis-mount-male-3-receptacle-p-soldering-connection/?share=telegram) - **Product categories:** RF Adaptors --- ### [Antenna Aerial coax Switch CS201 CS600 CB or HAM Radio so239 / pl259 connections](https://cbradio.co.uk/product/antenna-aerial-coax-switch-cs201-cs600-cb-or-ham-radio-so239-pl259-connections/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔀 CS201 / CS600 Coax Switch – 2 Way A/B Switch – SO239 – CB HAM Radio **All Metal • Low Loss • Professional Grade** This is a **2-way coaxial A/B switch**, ideal for running **2 radios to 1 antenna** or **1 radio to 2 antennas**. 👉 Simple, reliable switching for your setup --- 🔥 **Why Choose This Switch** ✔ 2 Way A/B Switching ✔ 1 Input / 2 Outputs (Works Either Direction) ✔ All Metal Construction ✔ Low Loss Performance ✔ High Power Handling 👉 Built for proper radio setups --- 📦 **What’s Included** ✔ CS201 / CS600 Coax Switch 👉 Ready to connect --- 📡 **Performance Highlights** Frequency Range: Up to 600 MHz Power Rating: Up to 1KW (CW) Insertion Loss: Less than 0.2 dB Grounding: Unused port grounded 👉 Clean switching with minimal signal loss --- ⚙️ **Features** ✔ Rotary selector switch ✔ SO-239 connectors ✔ Durable all-metal housing ✔ Reliable switching mechanism ✔ Compact design --- 💡 **How You Can Use It** ✔ 2 radios → 1 antenna ✔ 1 radio → 2 antennas 👉 Flexible setup options --- 🔧 **Installation** ✔ Connect radios and/or antennas ✔ Select A or B via rotary switch 👉 Simple and effective --- ⚠️ **Important Notes** ❗ A/B switch only – **no centre OFF position** ❗ Uses standard **SO-239 / PL259 connections** ❗ Ensure connections are tight for best performance --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: Coax cables Aerials SWR meters CB & HAM radios --- 🔥 **Order Today** **Switch smarter. Clean signal. Built to last.** 📡🔀 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/antenna-aerial-coax-switch-cs201-cs600-cb-or-ham-radio-so239-pl259-connections/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/antenna-aerial-coax-switch-cs201-cs600-cb-or-ham-radio-so239-pl259-connections/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/antenna-aerial-coax-switch-cs201-cs600-cb-or-ham-radio-so239-pl259-connections/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/antenna-aerial-coax-switch-cs201-cs600-cb-or-ham-radio-so239-pl259-connections/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Antenna%20Aerial%20coax%20Switch%20CS201%20CS600%20CB%20or%20HAM%20Radio%20so239%20%2F%20pl259%20connections&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fantenna-aerial-coax-switch-cs201-cs600-cb-or-ham-radio-so239-pl259-connections%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/antenna-aerial-coax-switch-cs201-cs600-cb-or-ham-radio-so239-pl259-connections/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/antenna-aerial-coax-switch-cs201-cs600-cb-or-ham-radio-so239-pl259-connections/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/antenna-aerial-coax-switch-cs201-cs600-cb-or-ham-radio-so239-pl259-connections/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [2 x 5 Pin DIN 180° Male Inline Plug MIDI type Connectors](https://cbradio.co.uk/product/2-x-5-pin-din-180-male-inline-plug-midi-type-connectors/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌🎹 2x 5 Pin DIN Male Inline Plugs – 180° MIDI Type Connectors – Solder Type **2 Pack • 180° DIN • Easy to Solder** This is a **pair of 5 Pin DIN 180° Male inline connectors**, ideal for **MIDI cables, audio gear and custom wiring projects**. 👉 Perfect for repairs, replacements or building your own leads --- 🔥 **Why Choose These Connectors** ✔ 2x 5 Pin DIN Male Plugs ✔ Standard 180° Pin Configuration ✔ Solder Cup Connections ✔ Lightweight & Easy to Work With ✔ Built-In Strain Relief 👉 Simple, reliable connections --- 📦 **What’s Included** ✔ 2x 5 Pin DIN Male Inline Connectors 👉 Supplied in multi-part housings for easy assembly --- 📡 **Perfect For** MIDI Cables Audio Equipment Custom Cable Builds Repairs & Replacements --- ⚙️ **Specifications** Connector Type: 5 Pin DIN Male Configuration: 180° Connection Type: Solder Cups Material: Plastic Housing Wire Compatibility: Up to 22 AWG Cable Entry: Up to 7mm --- 💡 **Why These Stand Out** ✔ Easy access solder cups ✔ Simple to assemble design ✔ Clean, secure cable termination ✔ Integrated strain relief for durability 👉 Get a proper connection every time --- 🔧 **Installation** ✔ Strip cable ✔ Solder to pins ✔ Assemble housing 👉 Quick and straightforward --- ⚠️ **Important Notes** ❗ Requires soldering ❗ Ensure correct pin wiring ❗ Suitable for audio & MIDI applications --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: DIN connectors Audio plugs Coax cables Radio accessories --- 🔥 **Order Today** **Reliable connection. Clean finish. Built to last.** 🔌 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-x-5-pin-din-180-male-inline-plug-midi-type-connectors/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-x-5-pin-din-180-male-inline-plug-midi-type-connectors/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-x-5-pin-din-180-male-inline-plug-midi-type-connectors/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-x-5-pin-din-180-male-inline-plug-midi-type-connectors/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%20x%205%20Pin%20DIN%20180%C2%B0%20Male%20Inline%20Plug%20MIDI%20type%20Connectors&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-x-5-pin-din-180-male-inline-plug-midi-type-connectors%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-x-5-pin-din-180-male-inline-plug-midi-type-connectors/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-x-5-pin-din-180-male-inline-plug-midi-type-connectors/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-x-5-pin-din-180-male-inline-plug-midi-type-connectors/?share=telegram) - **Product categories:** RF Adaptors --- ### [S-VHS Mini DIN 4 Pin Female In line Plug Solder Connector S-Video](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-female-in-line-plug-solder-connector-s-video/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎥🔌 S-VHS Mini DIN 4 Pin Female Connector – Inline Plug – S-Video Socket **4 Pin • Solder Type • Inline Connector** This is a **Mini DIN 4 Pin Female inline connector**, ideal for **S-Video (S-VHS) connections** and custom cable builds. 👉 Perfect for repairs, extensions or making your own cables --- 🔥 **Why Choose This Connector** ✔ Standard 4 Pin Mini DIN (S-Video) ✔ Inline Female Socket ✔ Solder Type Connection ✔ Compact & Easy to Use ✔ Includes Strain Relief 👉 Simple, reliable connection --- 📦 **What’s Included** ✔ 4 Pin Mini DIN Female Inline Connector 👉 Ready for soldering --- 📡 **Perfect For** S-Video / S-VHS Cables Custom Cable Builds Repairs & Replacements Audio / Video Equipment --- ⚙️ **Specifications** Connector Type: Mini DIN Pins: 4 Pin Gender: Female Connection: Solder Type Housing: Plastic Feature: Strain Relief --- 💡 **Why This Connector Stands Out** ✔ Clean, secure solder connection ✔ Compact inline design ✔ Built-in strain relief for durability ✔ Ideal for custom AV setups 👉 Get a proper connection every time --- 🔧 **Installation** ✔ Strip cable ✔ Solder wires to pins ✔ Assemble housing 👉 Quick and straightforward --- ⚠️ **Important Notes** ❗ Requires soldering ❗ Ensure correct pin wiring ❗ Suitable for S-Video applications --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- 💬 **More Available** 👉 Check our shop for: Connectors & adaptors Coax cable Audio / video leads Radio accessories --- 🔥 **Order Today** **Reliable connection. Clean finish. Built to last.** 🔌 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-female-in-line-plug-solder-connector-s-video/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-female-in-line-plug-solder-connector-s-video/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-female-in-line-plug-solder-connector-s-video/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-female-in-line-plug-solder-connector-s-video/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20S-VHS%20Mini%20DIN%204%20Pin%20Female%20In%20line%20Plug%20Solder%20Connector%20S-Video&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fs-vhs-mini-din-4-pin-female-in-line-plug-solder-connector-s-video%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-female-in-line-plug-solder-connector-s-video/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-female-in-line-plug-solder-connector-s-video/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-female-in-line-plug-solder-connector-s-video/?share=telegram) - **Product categories:** RF Adaptors --- ### [CRT S-MINI CB radio starter kit DIN mount and speaker combo](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-din-mount-and-speaker-combo/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📻🚙 CRT S-Mini Multi Standard CB Radio Starter Kit – Aerial, Mount, DIN & Speaker **Complete Kit • Compact Radio • Ready to Install** This is a **complete CB starter kit** built around the **CRT S-Mini multi-standard radio**, giving you everything you need for a **proper install straight out the box**. 👉 Ideal for beginners or anyone wanting a **simple, reliable setup** --- 🔥 **Why Choose This Kit** ✔ Complete Plug & Play Setup ✔ Compact CRT S-Mini CB Radio ✔ Multi-Standard (UK & EU Use) ✔ Aerial, Mount, DIN & Speaker Included ✔ Perfect Starter Package 👉 Everything in one box — no guesswork --- 📦 **What’s Included** ✔ CRT S-Mini CB Radio ✔ Black Mini Springer CB Aerial ✔ Right Angle Mirror / Roof Rack Mount ✔ DIN Mount Adapter ✔ External Extension Speaker ✔ Mounting Bracket & Power Lead 👉 Proper kit for a clean install --- 📡 **Radio Features** ✔ 80 Channels ✔ AM / FM Operation ✔ Multi Standard (UK & EU Bands) ✔ Blue Channel Display ✔ Front 4-Pin Mic Socket ✔ Volume Control ✔ Manual Squelch ✔ Direct Channel 9 & 19 Access ✔ RX/TX LED Indicator ✔ UP/DOWN Channel Buttons ✔ Internal Speaker ✔ External Speaker Socket 👉 Simple, no-nonsense operation --- ⚙️ **Specifications** Frequency (EU): 26.965 – 27.405 MHz Frequency (UK): 27.60125 – 27.99125 MHz Output Power: 4 Watts Modes: AM / FM Size: Approx 150 x 140 x 41mm --- 🚙 **Perfect For** Beginners to CB Radio 4×4 & Off-Road Vehicles Vans & Campers Trucks Everyday Road Use 👉 Compact size makes it easy to install anywhere --- 💡 **Why This Kit Stands Out** ✔ True all-in-one starter kit ✔ Multi-standard for use across Europe ✔ Compact radio with essential features only ✔ External speaker included for clear audio ✔ Designed for real vehicle installs 👉 Get on the air without the hassle --- 🔧 **Installation** ✔ Fit mount and aerial ✔ Install radio (DIN or bracket) ✔ Connect power and speaker 👉 Straightforward setup --- ⚠️ **Important Notes** ❗ External speaker included as DIN install covers internal speaker ❗ Ensure aerial is correctly tuned (SWR) before transmitting ❗ Suitable for mobile installations --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **More Kits Available** 👉 Check our shop for: Advanced starter kits CB radios SWR meters Aerial upgrades --- 🔥 **Order Today** **Everything you need. Simple setup. Get on the air.** 📻📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-din-mount-and-speaker-combo/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-din-mount-and-speaker-combo/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-din-mount-and-speaker-combo/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-din-mount-and-speaker-combo/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CRT%20S-MINI%20CB%20radio%20starter%20kit%20%20DIN%20mount%20and%20speaker%20combo&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-starter-kit-crt-s-mini-din-mount-and-speaker-combo%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-din-mount-and-speaker-combo/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-din-mount-and-speaker-combo/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-din-mount-and-speaker-combo/?share=telegram) - **Product categories:** CB Radio Starter Kits --- ### [Large Stinger Orbitor CB aerial & Rear mount 7M cable Land Rover Defender 110](https://cbradio.co.uk/product/large-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙📡 PSM-1 Defender Rear CB Aerial Kit + XL Springer – 7m RG58 – Heavy Duty Off-Road Setup **Complete Kit • Heavy Duty • Built for Defenders** This is a **proper PSM-1 rear mount CB aerial kit** with our **XL Springer antenna**, designed specifically for **Land Rover Defender setups**. 👉 The mount you’ll see on **9 out of 10 Defenders** — because it works --- 🔥 **Why Choose This Kit** ✔ Complete Plug & Play Setup ✔ Heavy Duty PSM-1 Rear Mount ✔ XL Springer Off-Road Aerial ✔ 7 Metre High Quality RG58 Cable ✔ Built for Real-World Use 👉 No cheap universal kits here --- 📦 **What’s Included** ✔ PSM-1 Rear Mount Bracket ✔ Black XL Springer CB Aerial ✔ 7m RG58 Low Loss Coax Cable ✔ PL259 Connector (Fitted) ✔ Step-by-step fitting instructions 👉 Everything you need for a **proper install** --- 🚙 **Perfect For** Land Rover Defender 110 4×4 & Off-Road Vehicles Trucks High Roof Vans 👉 Also available in **5m version for Defender 90** --- 📡 **Performance Highlights** Frequency: 26–28 MHz (CB Band) Strong flexible **springer design** Built for **off-road durability** 👉 Reliable performance in tough conditions --- ⚙️ **Specifications** Mount Type: PSM-1 Rear Bracket Antenna: XL Springer (Black) Cable: 7m RG58 Low Loss Connector: PL259 (Fitted) Fitting: 3/8 Stud Mount --- 💡 **Why This Kit Stands Out** ✔ Tailor made for Defender setups ✔ Proper cable length for clean routing ✔ UK made springer aerial ✔ No cheap import cables ✔ Built by people who actually use this gear 👉 We do this for a living — not for beer money --- 🔧 **Installation** ✔ Mount to rear position ✔ Route cable through vehicle ✔ Connect to radio 👉 Straightforward, no-nonsense install --- ⚠️ **Important Notes** ❗ Fits most 3/8 threaded aerials ❗ Ensure good grounding for best performance ❗ Suitable for multiple vehicle types --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: CB radios SWR meters Power leads Accessories --- 🔥 **Order Today** **Proper kit. Proper install. Built to last.** 🚙📡 ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Large%20Stinger%20Orbitor%20CB%20aerial%20%26%20Rear%20mount%207M%20cable%20Land%20Rover%20Defender%20110&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-stinger-orbitor-cb-aerial-rear-mount-7m-cable-land-rover-defender-110/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [Face plate DIN in dash mount for President Johnson II ASC CB radio](https://cbradio.co.uk/product/face-plate-din-in-dash-mount-for-president-johnson-ii-asc-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚗📻 DIN Mount Adapter – Metal CB Radio Cage – 172x53mm – Professional Fit **All Metal • Clean Install • OEM Look** This **DIN mounting adapter** allows you to fit your **CB radio neatly into a standard car stereo slot**, giving a **clean, factory-style installation**. 👉 No more loose radios or messy installs --- 🔥 **Why Choose This DIN Mount** ✔ Professional All Metal Construction ✔ Standard DIN Slot Fitment ✔ Clean, OEM-Style Installation ✔ Strong & Secure Radio Mounting ✔ Designed for Specific CB Models 👉 Proper install, not a bodge job --- 📦 **What’s Included** ✔ Metal DIN Mount Cage 👉 Ready to install into your dashboard --- 📡 **Compatible With** - President JOHNSON II - TTi TCB-900 - Alinco DR135DX --- ⚙️ **Specifications** Slot Size: 172 x 53mm Material: All Metal Construction Mount Type: DIN Dashboard Fit --- 💡 **Why This Mount Stands Out** ✔ Solid metal build – no flexing ✔ Better fit than cheap plastic versions ✔ Professional finish inside your vehicle ✔ Holds radio securely in place 👉 Don’t settle for flimsy alternatives --- 🔧 **Installation** ✔ Fit into standard DIN slot ✔ Secure in place ✔ Slide radio into mount 👉 Simple, clean setup --- ⚠️ **Important Notes** ❗ **CB radio NOT included** ❗ Internal speaker will be covered – **external speaker required** ❗ Check compatibility before purchase --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- 💬 **Complete Your Setup** 👉 Check our shop for: External speakers CB radios Power leads Aerial kits --- 🔥 **Order Today** **Clean install. Professional look. Built to last.** 🚗📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/face-plate-din-in-dash-mount-for-president-johnson-ii-asc-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/face-plate-din-in-dash-mount-for-president-johnson-ii-asc-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/face-plate-din-in-dash-mount-for-president-johnson-ii-asc-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/face-plate-din-in-dash-mount-for-president-johnson-ii-asc-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Face%20plate%20DIN%20in%20dash%20mount%20for%20President%20Johnson%20II%20ASC%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fface-plate-din-in-dash-mount-for-president-johnson-ii-asc-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/face-plate-din-in-dash-mount-for-president-johnson-ii-asc-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/face-plate-din-in-dash-mount-for-president-johnson-ii-asc-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/face-plate-din-in-dash-mount-for-president-johnson-ii-asc-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [MB700 adjustable Mirror or Roof rack mount for SO239 cable](https://cbradio.co.uk/product/mb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚛📡 MB-700 Heavy Duty Mirror / Roof Rack Mount – SO-239 – CB & HAM Aerial Bracket **Heavy Duty • Versatile Fit • Built for Mobile Use** The **MB-700 heavy duty mount** is designed for **mirror arms, roof racks and bars**, giving you a solid, reliable base for your aerial setup. 👉 Ideal for both **CB and HAM radio installations** --- 🔥 **Why Choose This Mount** ✔ Heavy Duty Construction ✔ Mirror Arm & Roof Rack Fitment ✔ Takes SO-239 Cable Connections ✔ Suitable for CB & HAM Aerials ✔ Strong, Stable Mounting Solution 👉 Built for real mobile setups --- 📦 **What’s Included** ✔ MB-700 Heavy Duty Mount 👉 Ready to pair with your aerial and cable --- 📡 **Compatible With** Commonly used with amateur radio antennas such as: - NR770R / NR770H - SG7500 - SG7900 👉 Also works with various **Sirio & SO-239 CB aerials** --- ⚙️ **Specifications** Mount Type: Mirror / Roof Rack Mount Connection Type: SO-239 Compatible Use: Mobile CB & HAM Installations --- 💡 **Why This Mount Stands Out** ✔ Strong bracket – won’t flex under load ✔ Clean install on bars, mirrors or racks ✔ Designed for real-world use ✔ Works with a wide range of aerials 👉 No cheap, flimsy metal here --- 🔧 **Installation** ✔ Clamp to mirror arm / rack / bar ✔ Fit your SO-239 cable ✔ Attach aerial and go 👉 Simple, solid setup --- ⚠️ **Important Notes** ❗ Requires SO-239 cable (sold separately) ❗ Ensure correct grounding for best performance ❗ Suitable for multiple vehicle types --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready for install --- 💬 **Complete Your Setup** 👉 Check our shop for: Aerials Coax cables SWR meters CB & HAM radios --- 🔥 **Order Today** **Strong mount. Clean install. Built to last.** 📡 ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MB700%20adjustable%20Mirror%20or%20Roof%20rack%20mount%20for%20SO239%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mb700-adjustable-mirror-or-roof-rack-mount-for-so239-cable/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [40A amp Variable Voltage Linear Regulated Power Supply Pack](https://cbradio.co.uk/product/40a-amp-variable-voltage-linear-regulated-power-supply-pack-qj1840sc/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚡🔌 40A Linear Regulated Power Supply – 1.5–15V Variable DC – QJ1840SC CB HAM PSU **High Power • Clean Output • Built for Radio Use** This **40 Amp linear regulated power supply** is designed for **serious CB & HAM radio users** who need **clean, stable, interference-free power**. 👉 Ideal for HF radios, base stations, bench use & 12V equipment --- 🔥 **Why Choose This Power Supply** ✔ True Linear PSU (Low Noise – No Interference) ✔ 40A Peak / 30A Continuous Output ✔ Fully Adjustable 1.5V – 15V DC ✔ Built for CB, HAM & HF Radios ✔ Heavy Duty Transformer Design 👉 Clean power where it matters --- 📦 **What’s Included** ✔ QJ1840SC Linear Power Supply ✔ UK Mains Lead 👉 Ready to use out of the box --- 📡 **Performance Highlights** Output Voltage: 1.5V – 15V DC Current Output: 40A Max / 30A Continuous Ripple: <10mV Load Regulation: <1% 👉 Stable, reliable performance for radio equipment --- ⚙️ **Features** ✔ Variable voltage control ✔ Analogue Volt & Amp meters ✔ Heavy duty binding post outputs ✔ Cigarette lighter socket (10A max) ✔ Terminal block outputs (3A per pair) ✔ Power switch & indicator light ✔ Short circuit protection ✔ Current limiting protection ✔ Panel mounted fuse --- 📏 **Specifications** Input Voltage: 220V 50Hz Output Voltage: 1.5–15V DC Max Output: 40 Amp Continuous Output: 30 Amp Temperature Range: 0°C – 40°C Dimensions: 240 x 300 x 150mm Weight: 8.9kg --- 💡 **Why Linear Power Matters** ✔ No RF interference ✔ Cleaner signal output ✔ Preferred by radio users 👉 Don’t compromise your signal with cheap switch-mode units --- 🔧 **Perfect For** CB Radio Base Stations HAM / Amateur Radio HF Transceivers Workshop & Bench Use 12V Equipment --- ⚠️ **Important Notes** ❗ Heavy unit (8.9kg) – built with a proper transformer ❗ Designed for indoor use ❗ Ensure adequate ventilation --- 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Reliable equipment --- 💬 **Complete Your Setup** 👉 Check our shop for: CB radios SWR meters Power leads Aerials & mounts --- 🔥 **Order Today** **Clean power. Proper setup. Built to last.** ⚡ ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/40a-amp-variable-voltage-linear-regulated-power-supply-pack-qj1840sc/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/40a-amp-variable-voltage-linear-regulated-power-supply-pack-qj1840sc/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/40a-amp-variable-voltage-linear-regulated-power-supply-pack-qj1840sc/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/40a-amp-variable-voltage-linear-regulated-power-supply-pack-qj1840sc/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2040A%20amp%20Variable%20Voltage%20Linear%20Regulated%20Power%20Supply%20Pack&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F40a-amp-variable-voltage-linear-regulated-power-supply-pack-qj1840sc%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/40a-amp-variable-voltage-linear-regulated-power-supply-pack-qj1840sc/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/40a-amp-variable-voltage-linear-regulated-power-supply-pack-qj1840sc/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/40a-amp-variable-voltage-linear-regulated-power-supply-pack-qj1840sc/?share=telegram) - **Product categories:** Power Supplies and Inverters --- ### [Inrico TM-7 Plus MKII 4G WiFi Global Mobile Network Radio Android unlocked](https://cbradio.co.uk/product/inrico-tm-7-plus-4g-wifi-global-mobile-network-radio-android-unlocked/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📱 **Inrico TM-7 MKII 4G Network Radio – POC Mobile – Zello / EchoLink / WiFi Hotspot** **4G • Android • Worldwide Comms** The **Inrico TM-7 MKII** is a **4G Android-based POC (Push-To-Talk over Cellular) mobile radio**, allowing **instant communication worldwide via mobile network or WiFi**. 👉 No RF interference. No range limits. Just **global communication**. --- ### 🔥 **Why Choose the TM-7 MKII** ✔ **4G Model (NOT outdated 3G)** ✔ **Android-Based System** ✔ **Works with Zello, EchoLink & TeamSpeak** ✔ **WiFi Hotspot Function Built-In** ✔ **Worldwide Communication via Network** --- ### 🌍 **How It Works** ✔ Uses **4G SIM or WiFi** instead of RF ✔ Connects to apps like: - Zello - TeamSpeak 3 - EchoLink - IRN (International Radio Network) 👉 Talk **anywhere in the world instantly**. --- ### 📡 **Perfect For** - Amateur radio operators - Fleet & business communication - Off-road & convoy groups - Private users wanting interference-free comms --- ### 🎤 **Key Features** ✔ Push-To-Talk over Cellular (POC) ✔ Global coverage (via network) ✔ Group & private calling ✔ WiFi hotspot capability ✔ App-based flexibility --- ### 💡 **For Amateur Radio Use** ✔ Access to IRN & EchoLink networks *(callsign required)* ✔ Expand your communication beyond RF limits 👉 A new way to explore **modern radio networks**. --- ### 🔊 **For Non-Licensed Users** ✔ Works like CB but: - No interference - No static - Unlimited range 👉 Simple **plug, SIM, and talk**. --- ### ⚙️ **Important Notes** ❗ **Does NOT transmit on RF bands** ❗ Requires **SIM card for 4G use** ❗ Can also operate via **WiFi only** --- ### 🚗 **Installation** ✔ Mobile radio format ✔ Connect to power supply ✔ Insert SIM or connect to WiFi 👉 Ready to go in minutes. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Antennas (for traditional radios) - Power supplies - Mounting accessories - Radio equipment --- ### 🔥 **Order Today** **No limits. No noise. Just talk.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/inrico-tm-7-plus-4g-wifi-global-mobile-network-radio-android-unlocked/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/inrico-tm-7-plus-4g-wifi-global-mobile-network-radio-android-unlocked/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/inrico-tm-7-plus-4g-wifi-global-mobile-network-radio-android-unlocked/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/inrico-tm-7-plus-4g-wifi-global-mobile-network-radio-android-unlocked/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Inrico%20TM-7%20Plus%20MKII%204G%20WiFi%20Global%20Mobile%20Network%20Radio%20Android%20unlocked&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Finrico-tm-7-plus-4g-wifi-global-mobile-network-radio-android-unlocked%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/inrico-tm-7-plus-4g-wifi-global-mobile-network-radio-android-unlocked/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/inrico-tm-7-plus-4g-wifi-global-mobile-network-radio-android-unlocked/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/inrico-tm-7-plus-4g-wifi-global-mobile-network-radio-android-unlocked/?share=telegram) - **Product categories:** Network radio --- ### [4" Lift Kit For Toyota Landcruiser 80 Series, ABS or none ABS fitted models](https://cbradio.co.uk/product/4-lift-kit-for-toyota-landcruiser-80-series-abs-or-none-abs-fitted-models/) **Published:** February 13, 2020 **Author:** Jan **Content:** **\*\*\*\*\* PLEASE RING FIRST TO CHECK STOCK LEVELS BEFORE PURCHASING\*\*\*\*\*** ## 🚙⬆️ **4″ Suspension Lift Kit – Toyota Land Cruiser 80 Series (ABS Models) – Pedders TrakRyder** **Serious Lift • Full Kit • Built for Off-Road** Transform your **Toyota Land Cruiser 80 Series** with this **complete 4-inch suspension lift kit**, engineered to **improve articulation, ground clearance, and off-road performance**. 👉 A **complete solution** – not just springs, but everything needed to do the job properly. --- ### ⚠️ **IMPORTANT** ❗ **PLEASE RING FIRST TO CHECK STOCK LEVELS BEFORE PURCHASING** --- ### 🔥 **Why Choose This Lift Kit** ✔ **Full 4” Lift – Improved Ground Clearance** ✔ **Complete Kit – Everything Included** ✔ **Designed for ABS Models** ✔ **Built for Serious Off-Road Use** ✔ **Premium Pedders TrakRyder Components** --- ### 📦 **What’s Included** ✔ **TrakRyder Raised Heavy Duty Coil Springs** ✔ **TrakRyder Long Travel Foam Cell Shock Absorbers** ✔ **Extended Sway Bar Links** ✔ **Alignment Correction Components** ✔ **Extended Brake Hoses (ABS Models Included)** ✔ **Assorted Chassis Hardware** 👉 Everything required for a **proper lift installation**. --- ### 📡 **Performance Benefits** ✔ Increased ground clearance ✔ Improved wheel articulation ✔ Better off-road capability ✔ Enhanced load handling 👉 Built for **rough terrain and heavy-duty use**. --- ### ⚙️ **Shock Absorber Technology** ✔ **Foam Cell Design (9500 Series)** ✔ Eliminates shock fade ✔ Larger **40mm bore piston** ✔ Increased oil capacity for better ride 👉 Delivers **consistent performance under load**. --- ### 🛠 **Spring Quality** ✔ Premium grade steel ✔ Stress relieved for durability ✔ 100% quality inspected 👉 Built to **handle extreme conditions**. --- ### 🚙 **Vehicle Compatibility** - Toyota Land Cruiser 80 Series - ABS Equipped Models --- ### 💡 **Why This Kit Stands Out** ✔ Not a basic lift – **complete engineered solution** ✔ Designed specifically for off-road performance ✔ Proven components used in real-world conditions 👉 A **serious upgrade for serious users**. --- ### 🔧 **Installation Notes** ✔ Professional installation recommended ✔ Wheel alignment required after fitting ✔ Check driveline angles if heavily loaded --- ### ⚠️ **Important Notes** ❗ Designed for off-road performance applications ❗ Ensure compatibility before purchase --- ### 📦 **UK Supply** ✔ Supplied from the UK ✔ Secure packaging ✔ Support available --- ### 💬 **Other Options Available** 👉 Check our shop for: - 2” lift kits - Standard height kits - Suspension components - Land Cruiser upgrades --- ### 🔥 **Order Today** **Lift it. Strengthen it. Take it further.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-lift-kit-for-toyota-landcruiser-80-series-abs-or-none-abs-fitted-models/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-lift-kit-for-toyota-landcruiser-80-series-abs-or-none-abs-fitted-models/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-lift-kit-for-toyota-landcruiser-80-series-abs-or-none-abs-fitted-models/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-lift-kit-for-toyota-landcruiser-80-series-abs-or-none-abs-fitted-models/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%22%20Lift%20Kit%20For%20Toyota%20Landcruiser%2080%20Series%2C%20ABS%20or%20none%20ABS%20fitted%20models&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-lift-kit-for-toyota-landcruiser-80-series-abs-or-none-abs-fitted-models%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-lift-kit-for-toyota-landcruiser-80-series-abs-or-none-abs-fitted-models/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-lift-kit-for-toyota-landcruiser-80-series-abs-or-none-abs-fitted-models/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-lift-kit-for-toyota-landcruiser-80-series-abs-or-none-abs-fitted-models/?share=telegram) - **Product categories:** Land Cruiser --- ### [RG8 MINI8 8m SUPER LOW LOSS 50 OHM COAXIAL CABLE RG-8 cable only](https://cbradio.co.uk/product/rg8-mini8-8m-super-low-loss-50-ohm-coaxial-cable-rg-8-cable-only/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **8m RG8 / Mini 8 Low Loss Coax Cable – 50 Ohm RG8X – Flexible RF Cable (No Plugs)** **Low Loss • Flexible • Professional Quality** This **8 metre length of RG8 (Mini 8 / RG8X) coax cable** is a **high-quality low loss 50Ω cable**, ideal for **CB, amateur radio, and RF applications**. 👉 Designed for **strong signal performance with excellent flexibility**. --- ### 🔥 **Why Choose This Cable** ✔ **Low Loss Performance** ✔ **Flexible – Similar Size to RG58** ✔ **Better Performance Than Standard RG58** ✔ **Ideal for Mobile & Base Installations** --- ### 📏 **What You Get** ✔ **8 Metres RG8 / Mini 8 Coax Cable** ❗ **NO plugs/connectors included** --- ### 📡 **Performance Highlights** - Impedance: **50 Ohms** - Velocity Factor: **80%** - Capacitance: **80 pF/m** - Screening Effectiveness: **>55 dB (100–900 MHz)** 👉 Excellent for **signal transmission with minimal loss**. --- ### ⚙️ **Construction** ✔ Plain copper inner conductor ✔ Foam polyethylene dielectric ✔ Plain copper outer conductor ✔ Low smoke PVC outer sheath 👉 Built for **durability and flexibility**. --- ### 📊 **Attenuation (dB per 100m)** - 50 MHz: **7.2 dB** - 100 MHz: **10.5 dB** - 400 MHz: **22.2 dB** - 600 MHz: **27.6 dB** - 860 MHz: **33.9 dB** - 1000 MHz: **37.0 dB** - 2400 MHz: **64.5 dB** --- ### 🚙 **Perfect For** - CB radio installations - Amateur (Ham) radio setups - Base station antennas - Scanner systems - General RF applications --- ### 💡 **Why RG8 Mini 8** ✔ Lower loss than RG58 ✔ More flexible than RG213 ✔ Ideal balance of performance and usability 👉 A **top choice for most installs**. --- ### 🔧 **Installation Notes** ✔ Add PL259 or other connectors as required ✔ Suitable for solder or compression fittings --- ### ⚠️ **Important Notes** ❗ Cable only – **NO connectors included** ❗ Ensure correct connectors for 6.1mm cable --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Cut to length --- ### 💬 **More Available** 👉 Check our shop for: - PL259 plugs & connectors - Pre-made coax leads - Antennas & mounts - RF accessories --- ### 🔥 **Order Today** **Low loss. Flexible. Built for performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg8-mini8-8m-super-low-loss-50-ohm-coaxial-cable-rg-8-cable-only/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg8-mini8-8m-super-low-loss-50-ohm-coaxial-cable-rg-8-cable-only/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg8-mini8-8m-super-low-loss-50-ohm-coaxial-cable-rg-8-cable-only/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg8-mini8-8m-super-low-loss-50-ohm-coaxial-cable-rg-8-cable-only/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG8%20MINI8%208m%20SUPER%20LOW%20LOSS%2050%20OHM%20COAXIAL%20CABLE%20RG-8%20cable%20only&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg8-mini8-8m-super-low-loss-50-ohm-coaxial-cable-rg-8-cable-only%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg8-mini8-8m-super-low-loss-50-ohm-coaxial-cable-rg-8-cable-only/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg8-mini8-8m-super-low-loss-50-ohm-coaxial-cable-rg-8-cable-only/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg8-mini8-8m-super-low-loss-50-ohm-coaxial-cable-rg-8-cable-only/?share=telegram) - **Product categories:** RG8 mini8 --- ### [CRT xenon V3 ultra compact CB radio 80 channels am fm multi-standard](https://cbradio.co.uk/product/ultra-compact-cb-radio-crt-xenon-v3-80-channels-am-fm-multi-standard/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **CRT Xenon Compact CB Radio AM/FM – Multi-Standard UK/EU – Detachable Mic – Multi Colour Display** **Ultra Compact • Feature Packed • Easy Install** The **CRT Xenon CB Radio** is a **compact multi-standard CB radio**, designed for users who need **performance in tight spaces** without sacrificing features. 👉 Now also available under the **Jopix GS30 name (same radio platform)**. --- ### ⚠️ **IMPORTANT NOTICE** ❗ CRT version discontinued – now available as **Jopix GS30 equivalent** 👉 Same design, features, and performance --- ### 🔥 **Why Choose the CRT Xenon** ✔ **Ultra Compact Design – Fits Anywhere** ✔ **Detachable Microphone** ✔ **Quick Disconnect Power Lead** ✔ **Multi-Colour LCD Display (7 Colours)** ✔ **Multi-Standard UK & EU Operation** --- ### 📡 **Multi-Standard Operation** ✔ **40 UK + 40 EU Channels (80 Total)** ✔ Easy switching between **UK & EU modes** ✔ Frequency: **26.965 – 27.405 MHz** 👉 Perfect for **UK & European use**. --- ### 🔊 **Performance Highlights** - Power Output: **4W AM / 4W FM** - Clear audio with **ASQ + RF Gain control** - Compact yet powerful --- ### 🎛 **Key Features** ✔ **Automatic Squelch (ASQ)** ✔ **Manual Squelch Control** ✔ **RF Gain & Mic Gain Adjustment** ✔ **Scan Function** ✔ **Channel 9/19 Quick Access** ✔ **Roger Beep** ✔ **UP/DOWN Mic Controls** --- ### 🎨 **Display & Design** ✔ **Large LCD Display** ✔ **7 Colour Backlight Options** ✔ Modern compact styling --- ### ⚙️ **Specifications** - Modes: **AM / FM** - Channels: **80 (UK + EU)** - Power: **4 Watts** - Size: **124 x 101 x 36 mm** - Weight: **428g** --- ### 🚙 **Perfect For** - Cars & vans - Trucks & 4×4 - Tight dashboard installs - Users needing compact radios --- ### 💡 **Why This Radio Stands Out** ✔ Small size, big features ✔ Flexible installation ✔ Reliable everyday performance ✔ Ideal entry-level or upgrade radio 👉 A **great all-round compact CB**. --- ### ⚠️ **Important Notes** ❗ Requires external CB antenna (50Ω) ❗ CRT branded version discontinued – Jopix equivalent supplied where applicable --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB antennas & mounts - Power leads - SWR meters - Coax cable & connectors --- ### 🔥 **Order Today** **Compact size. Full features. Ready to go.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ultra-compact-cb-radio-crt-xenon-v3-80-channels-am-fm-multi-standard/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ultra-compact-cb-radio-crt-xenon-v3-80-channels-am-fm-multi-standard/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ultra-compact-cb-radio-crt-xenon-v3-80-channels-am-fm-multi-standard/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ultra-compact-cb-radio-crt-xenon-v3-80-channels-am-fm-multi-standard/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CRT%20xenon%20V3%20ultra%20compact%20CB%20radio%2080%20channels%20am%20fm%20multi-standard&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fultra-compact-cb-radio-crt-xenon-v3-80-channels-am-fm-multi-standard%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ultra-compact-cb-radio-crt-xenon-v3-80-channels-am-fm-multi-standard/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ultra-compact-cb-radio-crt-xenon-v3-80-channels-am-fm-multi-standard/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ultra-compact-cb-radio-crt-xenon-v3-80-channels-am-fm-multi-standard/?share=telegram) - **Product categories:** CRT --- ### [president Barry 2 plus AM FM mobile CB radio](https://cbradio.co.uk/product/president-barry-am-fm-mobile-cb-radio-asc-12-24v/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=cgAg99MVJrg[/embed] **Content:** ## 📡🚗 **President Barry II+ CB Radio AM/FM – 12/24V Multi-Standard – NRC + Scan – UK/EU** **Compact • Reliable • Feature Packed** The **President Barry II+** is the **latest upgraded version** of the popular Barry II, now featuring **NRC noise reduction and scan function** for clearer and easier communication. 👉 A **top choice budget CB radio** from **President Electronics**. --- ### 🔥 **Why Choose the Barry II+** ✔ **NRC Noise Reduction (Clearer Audio)** ✔ **Scan Function (New Feature)** ✔ **12V / 24V Dual Voltage** ✔ **Multi-Standard UK & EU Bands** ✔ **Large Clear LCD Display** --- ### 📡 **Multi-Standard Operation** ✔ **UK 40 + EU 40 Channels** ✔ Switch easily between **UK & EU modes** ✔ Frequency: **26.965 – 27.405 MHz** 👉 Perfect for **UK & European use**. --- ### 🔊 **Performance Highlights** - Power Output: **4W FM / AM (Legal UK Power)** - Excellent sensitivity & selectivity - Clear audio with **NRC + ANL filtering** 👉 Designed for **reliable everyday communication**. --- ### 🎛 **Key Features** ✔ **ASC (Automatic Squelch Control)** ✔ **Manual Squelch** ✔ **S-Meter Display** ✔ **Scan Function** ✔ **Roger Beep** ✔ **Key Beep Function** ✔ **Time-Out Timer (TOT)** ✔ **Public Address (PA)** ✔ **Front Mic Socket** ✔ **External Speaker Jack** --- ### 🎤 **Included Accessories** ✔ Electret microphone + hanger ✔ Mounting bracket + screws 👉 Ready to install. --- ### ⚙️ **Specifications** - Modes: **AM / FM + UK FM** - Voltage: **12V / 24V** - Power: **4 Watts** - Dimensions: **125 x 175 x 45 mm** - Weight: **0.9 kg** - Antenna Impedance: **50 Ohms** --- ### 🚙 **Perfect For** - Cars, vans & trucks - 4×4 & off-road groups - Green lane driving - Convoy communication --- ### 💡 **Why This Radio Stands Out** ✔ Easy to use for beginners ✔ Reliable President build quality ✔ Compact and neat install ✔ Great value for money 👉 Ideal for **everyday CB use**. --- ### ⚠️ **Important Notes** ❗ Requires external CB antenna (50Ω) ❗ Ensure correct installation for best performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB antennas & mounts - Power leads - SWR meters - Coax cable & connectors --- ### 🔥 **Order Today** **Simple. Reliable. Ready when you are** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-barry-am-fm-mobile-cb-radio-asc-12-24v/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-barry-am-fm-mobile-cb-radio-asc-12-24v/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-barry-am-fm-mobile-cb-radio-asc-12-24v/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-barry-am-fm-mobile-cb-radio-asc-12-24v/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20president%20Barry%202%20plus%20AM%20FM%20mobile%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-barry-am-fm-mobile-cb-radio-asc-12-24v%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-barry-am-fm-mobile-cb-radio-asc-12-24v/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-barry-am-fm-mobile-cb-radio-asc-12-24v/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-barry-am-fm-mobile-cb-radio-asc-12-24v/?share=telegram) - **Product categories:** President --- ### [Oil Filter Genuine Toyota for LandCruiser Amazon 4.7 V8 lexus 2uz-fe spin on](https://cbradio.co.uk/product/oil-filter-genuine-toyota-for-landcruiser-amazon-4-7-v8-lexus-2uz-fe-spin-on/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Genuine Toyota Oil Filter – Toyota Land Cruiser 100 Series 4.7 V8 / Lexus LX470 – 2UZ-FE** **OEM Quality • Perfect Fit • Engine Protection** This **genuine Toyota oil filter** is designed specifically for the **4.7 V8 2UZ-FE engine**, ensuring **maximum engine protection, filtration, and reliability**. 👉 Don’t risk your engine with cheap copies – **fit genuine**. --- ### 🔥 **Why Choose Genuine Toyota** ✔ **OEM Factory Quality** ✔ **Perfect Fit & Performance** ✔ **Superior Filtration Efficiency** ✔ **Designed for 2UZ-FE Engines** --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 100 Series 4.7 V8 - Lexus LX470 - Engine: **2UZ-FE** 👉 May also fit other Toyota / Lexus models with the same engine. --- ### ⚙️ **Specifications** - Type: **Spin-On Oil Filter** - Engine: **2UZ-FE V8** - Quality: **Genuine OEM Toyota Part** --- ### 💡 **Why Use Genuine Oil Filters** ✔ Better filtration than aftermarket copies ✔ Maintains oil pressure correctly ✔ Longer engine life ✔ Designed to Toyota specifications 👉 Protect your engine **properly**. --- ### 🔧 **Installation** ✔ Remove old filter ✔ Lightly oil new seal ✔ Screw on and tighten 👉 Quick and simple service item. --- ### ⚠️ **Important Notes** ❗ Always check compatibility before purchase ❗ Replace oil and filter together for best results --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Service kits - Air & fuel filters - Land Cruiser parts - Engine components --- ### 🔥 **Order Today** **Genuine part. Proper protection. Peace of mind.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/oil-filter-genuine-toyota-for-landcruiser-amazon-4-7-v8-lexus-2uz-fe-spin-on/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/oil-filter-genuine-toyota-for-landcruiser-amazon-4-7-v8-lexus-2uz-fe-spin-on/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/oil-filter-genuine-toyota-for-landcruiser-amazon-4-7-v8-lexus-2uz-fe-spin-on/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/oil-filter-genuine-toyota-for-landcruiser-amazon-4-7-v8-lexus-2uz-fe-spin-on/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Oil%20Filter%20Genuine%20Toyota%20for%20LandCruiser%20Amazon%204.7%20V8%20lexus%202uz-fe%20spin%20on&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Foil-filter-genuine-toyota-for-landcruiser-amazon-4-7-v8-lexus-2uz-fe-spin-on%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/oil-filter-genuine-toyota-for-landcruiser-amazon-4-7-v8-lexus-2uz-fe-spin-on/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/oil-filter-genuine-toyota-for-landcruiser-amazon-4-7-v8-lexus-2uz-fe-spin-on/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/oil-filter-genuine-toyota-for-landcruiser-amazon-4-7-v8-lexus-2uz-fe-spin-on/?share=telegram) - **Product categories:** Land Cruiser --- ### [T&K 24" Pair of Heavy Duty Galvanized Home Base Aerial Brackets 24 inch](https://cbradio.co.uk/product/tk-24-pair-of-heavy-duty-galvanized-home-base-aerial-brackets-24-inch/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🗼🔧 **24″ T&K Aerial Brackets – Heavy Duty Galvanised Wall Mount Pair – Mast Support Kit** **Strong • Reliable • Built to Last** This **pair of 24″ T&K wall brackets** provides a **heavy-duty mounting solution** for aerial masts, antennas, and satellite installations. 👉 Designed for **secure, long-term outdoor use**. --- ### 🔥 **Why Choose These T&K Brackets** ✔ **Heavy Duty Steel Construction** ✔ **Hot Dip Galvanised – Rust Resistant** ✔ **Supports Large Mast Sizes** ✔ **Ideal for Base Station & Aerial Installations** --- ### 📦 **What’s Included** ✔ **2 x 24″ T&K Wall Brackets (Pair)** 👉 Ready for **secure mast mounting**. --- ### 📡 **Perfect For** - CB & Ham radio base antennas - TV aerials & satellite dishes - Scanner antennas - CCTV or other outdoor equipment --- ### ⚙️ **Specifications** - Length: **24″ (Approx. 610mm)** - Clearance from Wall: **~20″ (Approx. 500mm)** - Mast Capacity: **Up to 3″ (75mm diameter)** - Material: **Hot Dip Galvanised Steel** --- ### 💡 **Why Use T&K Brackets** ✔ Provides strong wall-mounted support ✔ Keeps mast stable in wind ✔ Ideal for permanent installations 👉 A **professional mounting solution**. --- ### 🔧 **Installation Notes** ✔ Requires suitable wall fixings (not included) ✔ Mount to solid wall surface ✔ Use with mast and U-bolts 👉 Built for **secure installations**. --- ### ⚠️ **Important Notes** ❗ Fixings not included ❗ Ensure correct installation for safety --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mast poles - U-bolts & fixings - Guy rope kits - Antennas & accessories --- ### 🔥 **Order Today** **Mount it strong. Keep it secure. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tk-24-pair-of-heavy-duty-galvanized-home-base-aerial-brackets-24-inch/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tk-24-pair-of-heavy-duty-galvanized-home-base-aerial-brackets-24-inch/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tk-24-pair-of-heavy-duty-galvanized-home-base-aerial-brackets-24-inch/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tk-24-pair-of-heavy-duty-galvanized-home-base-aerial-brackets-24-inch/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20T%26K%2024%22%20Pair%20of%20Heavy%20Duty%20Galvanized%20Home%20Base%20Aerial%20Brackets%2024%20inch&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftk-24-pair-of-heavy-duty-galvanized-home-base-aerial-brackets-24-inch%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tk-24-pair-of-heavy-duty-galvanized-home-base-aerial-brackets-24-inch/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tk-24-pair-of-heavy-duty-galvanized-home-base-aerial-brackets-24-inch/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tk-24-pair-of-heavy-duty-galvanized-home-base-aerial-brackets-24-inch/?share=telegram) - **Product categories:** Installation aid --- ### [4 x F Connectors + 2 F to F barrel coupler joiner for sky or freesat caravan](https://cbradio.co.uk/product/4-x-f-connectors-2-f-to-f-barrel-coupler-joiner-for-sky-or-freesat-caravan/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **4x F Connectors + 2x F-F Couplers – Satellite Coax Connectors – Sky Freesat Caravan** **Repair • Extend • Reliable Signal** This **handy connector kit** includes **4 F-type connectors and 2 female-to-female couplers**, ideal for **satellite TV installations and repairs**. 👉 Perfect for **Sky, Freesat, caravans, and mobile setups**. --- ### 🔥 **Why Choose This Kit** ✔ **Complete Connector & Joiner Set** ✔ **Ideal for Repairs & Extensions** ✔ **Strong, Reliable Signal Connection** ✔ **Great Value Pack** --- ### 📦 **What’s Included** ✔ **4 x F-Type Connectors (Male)** ✔ **2 x F-Type Female Barrel Couplers** 👉 Everything you need to **fix or extend your satellite cable**. --- ### 📡 **Perfect For** - Sky TV installations - Freesat systems - Caravans & motorhomes - Boats & marine use - Home satellite setups --- ### ⚙️ **Specifications** - Connector Type: **F-Type (Satellite Coax)** - Quantity: **4 Connectors + 2 Couplers** - Use: **Satellite / Coax Cable Connections** --- ### 💡 **Common Uses** ✔ Extend existing cable runs ✔ Repair damaged connectors ✔ Join two coax cables together 👉 Essential for **DIY installs and maintenance**. --- ### 🔧 **Installation** ✔ Strip coax cable ✔ Screw F connector onto cable ✔ Use coupler to join cables 👉 Quick and easy. --- ### ⚠️ **Important Notes** ❗ Suitable for standard satellite coax cable ❗ Ensure tight fit for best signal quality --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable - TV & satellite accessories - Adaptors & connectors - RF equipment --- ### 🔥 **Order Today** **Fix it fast. Extend it easily. Stay connected.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-x-f-connectors-2-f-to-f-barrel-coupler-joiner-for-sky-or-freesat-caravan/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-x-f-connectors-2-f-to-f-barrel-coupler-joiner-for-sky-or-freesat-caravan/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-x-f-connectors-2-f-to-f-barrel-coupler-joiner-for-sky-or-freesat-caravan/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-x-f-connectors-2-f-to-f-barrel-coupler-joiner-for-sky-or-freesat-caravan/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20x%20F%20Connectors%20%2B%202%20F%20to%20F%20barrel%20coupler%20joiner%20for%20sky%20or%20freesat%20caravan&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-x-f-connectors-2-f-to-f-barrel-coupler-joiner-for-sky-or-freesat-caravan%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-x-f-connectors-2-f-to-f-barrel-coupler-joiner-for-sky-or-freesat-caravan/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-x-f-connectors-2-f-to-f-barrel-coupler-joiner-for-sky-or-freesat-caravan/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-x-f-connectors-2-f-to-f-barrel-coupler-joiner-for-sky-or-freesat-caravan/?share=telegram) - **Product categories:** RF Adaptors --- ### [12W 8 Ohm PA Public Address Horn speaker For CB Radio Weather Proof Black](https://cbradio.co.uk/product/12w-8-ohm-pa-public-address-horn-speaker-for-cb-radio-weather-proof-black/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📢🔊 **12W 8 Ohm PA Horn Speaker – CB Radio External Speaker – Weatherproof 5″ Black** **Loud • Clear • Built for Outdoors** This **12W PA horn speaker** is a **compact, weatherproof external speaker**, perfect for **CB radios with PA function, security systems, and general public address use**. 👉 Delivers **clear, loud audio in any environment**. --- ### 🔥 **Why Choose This PA Speaker** ✔ **Loud 12W Output** ✔ **Crisp & Clear Sound Reproduction** ✔ **Weatherproof Outdoor Design** ✔ **Plug & Play with 3.5mm Jack** --- ### 📡 **Perfect For** - CB radios with PA function - Public address systems - Security & alarm systems - Vehicles (trucks, vans, 4×4) --- ### 🔊 **Performance Highlights** - Power Output: **12 Watts** - Impedance: **8 Ohm** - Speaker Type: **Horn / PA Speaker** 👉 Designed for **clear projection over distance**. --- ### ⚙️ **Specifications** - Size: **5” Horn Speaker** - Colour: **Black** - Construction: **Weatherproof Plastic Housing** - Cable: **10ft Lead (Approx. 3 Metres)** - Connector: **3.5mm Jack Plug (Fitted)** --- ### 💡 **Why Use a PA Horn Speaker** ✔ Projects sound further than standard speakers ✔ Ideal for outdoor use ✔ Clear voice transmission 👉 Perfect for **announcements or CB PA setups**. --- ### 🔧 **Installation** ✔ Mount in suitable position ✔ Plug into PA socket on radio ✔ Ready to use 👉 Simple plug-and-play setup. --- ### ⚠️ **Important Notes** ❗ Requires CB radio with PA function ❗ Mounting position affects sound projection --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - CB radios with PA function - External speakers - Mounts & brackets - Accessories --- ### 🔥 **Order Today** **Be heard. Stay clear. Built for the job.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/12w-8-ohm-pa-public-address-horn-speaker-for-cb-radio-weather-proof-black/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/12w-8-ohm-pa-public-address-horn-speaker-for-cb-radio-weather-proof-black/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/12w-8-ohm-pa-public-address-horn-speaker-for-cb-radio-weather-proof-black/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/12w-8-ohm-pa-public-address-horn-speaker-for-cb-radio-weather-proof-black/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2012W%208%20Ohm%20PA%20Public%20Address%20Horn%20speaker%20For%20CB%20Radio%20Weather%20Proof%20Black&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F12w-8-ohm-pa-public-address-horn-speaker-for-cb-radio-weather-proof-black%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/12w-8-ohm-pa-public-address-horn-speaker-for-cb-radio-weather-proof-black/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/12w-8-ohm-pa-public-address-horn-speaker-for-cb-radio-weather-proof-black/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/12w-8-ohm-pa-public-address-horn-speaker-for-cb-radio-weather-proof-black/?share=telegram) - **Product categories:** CB Radio Extension Speakers --- ### [G5RV Full size PVC Coated Thick Superior Copper Flex Weave](https://cbradio.co.uk/product/g5rv-full-size-pvc-coated-thick-superior-copper-flex-weave/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🗼 **G5RV Full Size Wire Antenna 102ft – 80–10m Multi Band – PVC Coated Flex Weave – UK Made** **Multi-Band • Strong • Proven Design** This **full-size G5RV antenna** is a **high-quality multi-band wire aerial**, built using **thick PVC-coated copper flex weave** and **300Ω ladder line** for excellent performance and durability. 👉 One of the **most trusted antennas ever designed**. --- ### 📜 **Legendary Design** The **Louis Varney (G5RV)** antenna, developed in **1946**, remains one of the **most widely used wire antennas worldwide**. 👉 A proven solution for **serious amateur operators**. --- ### 🔥 **Why Choose This G5RV** ✔ **Full Size 102ft for Maximum Performance** ✔ **Covers 80–10 Metre Bands** ✔ **Strong PVC Coated Flex Weave Wire** ✔ **High Quality 300Ω Ladder Feed** ✔ **Made in Great Britain** --- ### 📦 **What’s Included** ✔ **Full Length G5RV Antenna (102ft / 31m)** ✔ **300Ω Ladder Ribbon Feed Line** ✔ **SO239 Connector (Feeder End)** ✔ **2 x Dog Bone Insulators** ✔ **Instruction Sheet** 👉 Everything needed to get on the air. --- ### 📡 **Performance Highlights** - Frequency Range: **7 – 30 MHz** - Band Coverage: **80m – 10m** *(via ATU)* - Configuration: **Best as Inverted V** 👉 Excellent **all-round HF performance**. --- ### ⚙️ **Specifications** - Total Length: **102 Feet (2 x 51ft elements)** - Wire: **PVC Coated Copper Flex Weave** - Feed Line: **300Ω Ladder Ribbon** - Connector: **SO239** - Build: **Heavy Duty / Weather Resistant** --- ### 💡 **Why This G5RV Stands Out** ✔ Stronger than standard wire antennas ✔ Resistant to kinks and breakage ✔ Long lifespan outdoors ✔ Reliable performance across multiple bands 👉 Built to **last for years**. --- ### 🗼 **Installation Options** ✔ Inverted V (recommended) ✔ Flat top ✔ Portable setups 👉 Flexible installation for **different locations**. --- ### ⚠️ **Important Notes** ❗ ATU (Antenna Tuner) recommended for full band coverage ❗ Requires suitable mounting points --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - ATU / antenna tuners - Coax cable & connectors - Mast poles & guy kits - RF accessories --- ### 🔥 **Order Today** **Proven design. Strong build. Reliable performance.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/g5rv-full-size-pvc-coated-thick-superior-copper-flex-weave/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/g5rv-full-size-pvc-coated-thick-superior-copper-flex-weave/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/g5rv-full-size-pvc-coated-thick-superior-copper-flex-weave/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/g5rv-full-size-pvc-coated-thick-superior-copper-flex-weave/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20G5RV%20Full%20size%20PVC%20Coated%20Thick%20Superior%20Copper%20Flex%20Weave&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fg5rv-full-size-pvc-coated-thick-superior-copper-flex-weave%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/g5rv-full-size-pvc-coated-thick-superior-copper-flex-weave/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/g5rv-full-size-pvc-coated-thick-superior-copper-flex-weave/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/g5rv-full-size-pvc-coated-thick-superior-copper-flex-weave/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Copper Plated Earth Rod With Solid Brass Clamp](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚡📡 **Copper Earth Rod Kit 4ft (1.2m) – Grounding Rod + Brass Clamp – Radio Shack / Aerial Earthing** **Safe Grounding • Heavy Duty • Essential Protection** This **high-quality copper-bonded earth rod kit** is the **ideal solution for grounding your radio shack or aerial system safely**. 👉 Don’t rely on mains earth – **proper grounding starts here**. --- ### 🔥 **Why Choose This Earth Rod Kit** ✔ **Improves Equipment Safety** ✔ **Reduces Electrical Noise & Interference** ✔ **Protects Against Static Build-Up** ✔ **Essential for Radio Installations** --- ### 📦 **What’s Included** ✔ **1 x Copper-Bonded Earth Rod (4ft / 1.2m)** ✔ **1 x Solid Brass Clamp** *(style may vary)* 👉 Everything needed to **get properly grounded**. --- ### ⚙️ **Specifications** - Rod Type: **Copper Bonded Steel Core** - Length: **1200mm (4ft)** - Diameter: **9.53mm (3/8″)** - Clamp: **Solid Brass** --- ### 📡 **Perfect For** - CB radio installations - Amateur (Ham) radio setups - Antenna grounding - Radio shacks - Outdoor electrical grounding --- ### 💡 **Why Proper Earthing Matters** ✔ Reduces RF interference ✔ Improves signal performance ✔ Protects equipment from static & surges 👉 A must-have for **serious radio setups**. --- ### 🔧 **Installation** ✔ Drive rod into ground ✔ Attach earth cable using clamp ✔ Connect to equipment or antenna system 👉 Simple and effective. --- ### ⚠️ **Important Notes** ❗ Do NOT rely solely on mains earth for radio setups ❗ Installation should follow local electrical safety guidelines --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable - Antennas & mounts - SWR meters - RF accessories --- ### 🔥 **Order Today** **Ground it properly. Protect your gear. Improve performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Copper%20Plated%20Earth%20Rod%20With%20Solid%20Brass%20Clamp&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcopper-plated-earth-rod-with-solid-brass-clamp%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [4x TV aerial coax plugs and 2 Female barrel coupler joiner freeview boat caravan](https://cbradio.co.uk/product/4x-tv-aerial-coax-plugs-and-2-female-barrel-coupler-joiner-freeview-boat-caravan/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📺🔌 **4x TV Coax Plugs + 2x Female Couplers – Aerial Connectors – Freeview Caravan Boat** **Repair • Extend • Reliable Connection** This **handy connector pack** includes **4 TV aerial coax plugs and 2 female barrel couplers**, perfect for **repairing or extending TV aerial cables**. 👉 Ideal for **Freeview setups at home or on the move**. --- ### 🔥 **Why Choose This Pack** ✔ **Complete Connector Set** ✔ **Ideal for Repairs & Extensions** ✔ **Reliable Signal Connection** ✔ **Great Value Pack** --- ### 📦 **What’s Included** ✔ **4 x TV Coax Plugs (Male)** ✔ **2 x Female Barrel Couplers** 👉 Everything you need to **fix or extend your aerial cable**. --- ### 📡 **Perfect For** - Freeview TV setups - Caravans & motorhomes - Boats & marine use - Horse boxes - Home TV aerial systems --- ### ⚙️ **Specifications** - Connector Type: **Standard TV Coax (IEC)** - Quantity: **4 Plugs + 2 Couplers** - Use: **Aerial / TV Cable Connections** --- ### 💡 **Common Uses** ✔ Extend short aerial leads ✔ Repair damaged connectors ✔ Join two coax cables together 👉 A must-have for **DIY and travel setups**. --- ### 🔧 **Installation** ✔ Fit plug to coax cable ✔ Screw or push into place ✔ Use coupler to join cables 👉 Simple and effective. --- ### ⚠️ **Important Notes** ❗ Suitable for standard TV aerial coax only ❗ Ensure secure fitting for best signal --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable - Satellite connectors - Aerials & mounts - RF accessories --- ### 🔥 **Order Today** **Fix it fast. Extend it easily. Stay connected.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4x-tv-aerial-coax-plugs-and-2-female-barrel-coupler-joiner-freeview-boat-caravan/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4x-tv-aerial-coax-plugs-and-2-female-barrel-coupler-joiner-freeview-boat-caravan/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4x-tv-aerial-coax-plugs-and-2-female-barrel-coupler-joiner-freeview-boat-caravan/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4x-tv-aerial-coax-plugs-and-2-female-barrel-coupler-joiner-freeview-boat-caravan/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204x%20TV%20aerial%20coax%20plugs%20and%202%20Female%20barrel%20coupler%20joiner%20freeview%20boat%20caravan&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4x-tv-aerial-coax-plugs-and-2-female-barrel-coupler-joiner-freeview-boat-caravan%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4x-tv-aerial-coax-plugs-and-2-female-barrel-coupler-joiner-freeview-boat-caravan/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4x-tv-aerial-coax-plugs-and-2-female-barrel-coupler-joiner-freeview-boat-caravan/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4x-tv-aerial-coax-plugs-and-2-female-barrel-coupler-joiner-freeview-boat-caravan/?share=telegram) - **Product categories:** RF Adaptors --- ### [PL259 4 x UHF Coax Plugs 9mm for RG213 coax pack of 4 plus 1 pl258 coupler](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4-plus-1-pl258-coupler/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **4x PL259 UHF Plugs for RG213 (9mm) + 1x PL258 Coupler – Heavy Duty Coax Connectors** **Professional Grade • Heat Resistant • Built to Last** This **connector pack** includes **4 high-quality PL259 plugs (9mm for RG213 coax)** plus **1 PL258 double female coupler**, perfect for **serious CB, amateur radio, and RF installations**. 👉 Ideal for **building, repairing, or extending coax cables**. --- ### 🔥 **Why Choose These Connectors** ✔ **Designed for RG213 (9mm Coax)** ✔ **Brown Inserts – Won’t Melt When Soldering** ✔ **Includes PL258 Coupler for Joining Cables** ✔ **Strong & Reliable RF Connection** --- ### 📦 **What’s Included** ✔ **4 x PL259 UHF Plugs (9mm RG213)** ✔ **1 x PL258 Female to Female Coupler** 👉 Everything you need for **solid cable connections**. --- ### 📡 **Perfect For** - CB radio installations - Amateur (Ham) radio setups - Base station antennas - Making custom coax leads - Extending cable runs --- ### ⚙️ **Specifications** - Connector Type: **PL259 (UHF Male)** - Coupler Type: **PL258 (UHF Female to Female)** - Cable Size: **9mm (RG213)** - Quantity: **4 Plugs + 1 Coupler** --- ### 💡 **Why Brown Insert PL259s Matter** ✔ Heat resistant during soldering ✔ More durable than cheap white insert versions ✔ Ensures long-lasting, reliable connection 👉 No melting. No frustration. Just quality. --- ### 🔧 **Installation** ✔ Strip coax cable ✔ Solder centre conductor ✔ Screw connector body into place 👉 Suitable for DIY and professional installs. --- ### ⚠️ **Important Notes** ❗ Designed for **RG213 (9mm coax only)** ❗ Requires soldering ❗ Ensure correct cable preparation --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - RG213 / Mini 8 / RG58 cable - SO239 sockets - Adaptors & connectors - Radio accessories --- ### 🔥 **Order Today** **Do it once. Do it right. No cheap connectors.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4-plus-1-pl258-coupler/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4-plus-1-pl258-coupler/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4-plus-1-pl258-coupler/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4-plus-1-pl258-coupler/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PL259%204%20x%20UHF%20Coax%20Plugs%209mm%20for%20RG213%20coax%20pack%20of%204%20plus%201%20pl258%20coupler&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-4-x-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4-plus-1-pl258-coupler%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4-plus-1-pl258-coupler/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4-plus-1-pl258-coupler/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4-plus-1-pl258-coupler/?share=telegram) - **Product categories:** PL259 Connectors --- ### [DIN Mounting Bracket Face Plate for TTI 555, CRT Team and Midland CB Radios](https://cbradio.co.uk/product/din-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚗📻 **Metal DIN Mount Kit for CB Radio – 124x38mm – Professional Dash Install Bracket** **Clean Install • Heavy Duty • Professional Finish** This **all-metal DIN mount kit** allows you to **install your CB radio neatly into a standard car stereo slot**, giving a **factory-style finish**. 👉 Ideal for **tidy, secure, and professional installations**. --- ### 🔥 **Why Choose This DIN Mount** ✔ **Full Metal Construction – Strong & Durable** ✔ **Professional OEM-Style Installation** ✔ **Fits Standard DIN Dashboard Slots** ✔ **Secure & Neat Fitment** --- ### 📡 **Compatible Radios** Fits models such as: - Team TS-6M - Midland 203 / 210 / 38 / 98 - TTi 555 / 550 / 560 / 565 - CRT S-Mini 👉 Also compatible with **similar sized CB radios**. --- ### ⚙️ **Specifications** - Type: **DIN Mount Adapter Kit** - Material: **All Metal Construction** - Slot Dimensions: **124 x 38 mm** --- ### 💡 **Why Use a DIN Mount** ✔ Clean dashboard appearance ✔ Secure mounting position ✔ Reduces clutter ✔ Professional finish 👉 The best way to **integrate your CB radio properly**. --- ### 🔧 **Installation Notes** ✔ Fits standard DIN slot ✔ Radio slides into mount ✔ Secure with supplied fittings ❗ *Speaker will be covered – external speaker recommended* --- ### ⚠️ **Important Notes** ❗ **CB radio NOT included** ❗ Check radio dimensions before purchase ❗ External speaker required when installed --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - External speakers - CB radios - Power leads & accessories - Antennas & mounts --- ### 🔥 **Order Today** **Fit it properly. Look professional. Install it right.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/din-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/din-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/din-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/din-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DIN%20Mounting%20Bracket%20Face%20Plate%20for%20TTI%20555%2C%20CRT%20Team%20and%20Midland%20CB%20Radios&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdin-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/din-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/din-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/din-mounting-bracket-face-plate-for-tti-555-crt-team-and-midland-cb-radios/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [Mini Springer CB aerial and PSM1 side mount with 7M cable for Defender 110](https://cbradio.co.uk/product/mini-springer-cb-aerial-and-psm1-side-mount-with-7m-cable-for-defender-110/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙📡 **PSM-1 Rear CB Aerial Mount Kit + Mini Stinger Antenna – 7m Cable – Defender / Camper** **Complete Kit • Heavy Duty • Built for Off-Road** This **PSM-1 rear mount CB antenna kit** includes a **heavy duty mount, 7m RG58 coax, and Black Mini Stinger aerial**, giving you a **professional, ready-to-install solution**. 👉 The **go-to setup seen on 9 out of 10 Defenders**. --- ### 🔥 **Why Choose This Kit** ✔ **Complete Plug & Play Setup** ✔ **Heavy Duty PSM-1 Rear Mount** ✔ **Mini Stinger / Springer Antenna Included** ✔ **7 Metres Quality RG58 Cable** ✔ **Made & Assembled in the UK** --- ### 📦 **What’s Included** ✔ **PSM-1 Rear Mount Bracket** ✔ **Mini Stinger CB Antenna (Black)** ✔ **7 Metres RG58 Coax Cable (Low Loss)** ✔ **PL259 Connector (Fitted)** ✔ **Step-by-Step Fitting Instructions** 👉 Everything needed for a **proper install**. --- ### 🚙 **Perfect For** - Land Rover Defender 110 - VW Campers - 4×4 & off-road vehicles - Vans & high roof vehicles - Trucks 👉 Also available in **5m version for Defender 90** *(see our shop)*. --- ### 📡 **Performance Highlights** - Frequency: **26–28 MHz (CB Band)** - **Low VSWR ≤ 1.5:1** - **High power handling up to 1000W** 👉 Reliable performance in **all conditions**. --- ### ⚙️ **Specifications** - Mount Type: **PSM-1 Rear Bracket** - Antenna: **Mini Stinger / Springer** - Cable: **7m RG58 Low Loss Coax** - Connector: **PL259 (Fitted)** - Fitting: **3/8 Stud Mount** --- ### 💡 **Why This Kit Stands Out** ✔ Tailor-made for real vehicles ✔ Proper cable length (not generic kits) ✔ Durable, off-road ready design ✔ Trusted by professionals 👉 Built by people who **actually use this gear**. --- ### 🔧 **Installation** ✔ Mount to rear ladder or body position ✔ Route cable to radio ✔ Connect and go 👉 Designed for **practical, real-world fitting**. --- ### ⚠️ **Important Notes** ❗ Fits most 3/8 threaded antennas ❗ Ensure proper grounding for best performance ❗ Suitable for various vehicles beyond Defender --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - SWR meters - Power leads & accessories - Additional mounts & brackets --- ### 🔥 **Order Today** **Proper kit. Proper install. Built for the job.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-cb-aerial-and-psm1-side-mount-with-7m-cable-for-defender-110/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-cb-aerial-and-psm1-side-mount-with-7m-cable-for-defender-110/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-cb-aerial-and-psm1-side-mount-with-7m-cable-for-defender-110/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-cb-aerial-and-psm1-side-mount-with-7m-cable-for-defender-110/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20Springer%20CB%20aerial%20and%20PSM1%20side%20mount%20with%207M%20cable%20for%20Defender%20110&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-cb-aerial-and-psm1-side-mount-with-7m-cable-for-defender-110%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-cb-aerial-and-psm1-side-mount-with-7m-cable-for-defender-110/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-cb-aerial-and-psm1-side-mount-with-7m-cable-for-defender-110/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-cb-aerial-and-psm1-side-mount-with-7m-cable-for-defender-110/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [10A Glass Fuse 32mm x 6mm Quick blow Pack of 10 fuses](https://cbradio.co.uk/product/10a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌⚡ **10x 10A Glass Fuses 32mm x 6mm – Quick Blow Fuse Pack – Radio Replacement** **Fast Acting • Reliable Protection • Essential Spare** This **pack of 10 quick-blow 10A glass fuses** is ideal for **protecting radio equipment and electronics** from overload and short circuits. 👉 Perfect for radios from **Kenwood, Yaesu, and Icom**. --- ### 🔥 **Why Choose These Fuses** ✔ **Quick Blow (Fast Acting Protection)** ✔ **Ideal for Radio Equipment** ✔ **Standard Size – Easy Replacement** ✔ **Great Value 10 Pack** --- ### ✅ **Key Features** ✔ **10 Amp Rating** ✔ **32mm x 6mm Glass Fuse** ✔ **Fast Acting / Quick Blow Type** ✔ **Clear Glass Body for Easy Inspection** --- ### 📡 **Perfect For** - Amateur (Ham) radios - CB radios - Power supplies - General electronics --- ### ⚙️ **Specifications** - Type: **Glass Fuse (Quick Blow)** - Rating: **10 Amp (10A)** - Size: **32mm x 6mm** - Quantity: **Pack of 10** --- ### 💡 **Why Use Quick Blow Fuses** ✔ Instant protection for sensitive electronics ✔ Prevents damage from power surges ✔ Easy and cost-effective replacement 👉 Essential for **safe and reliable operation**. --- ### 🔧 **Installation** ✔ Remove old fuse ✔ Insert correct replacement ✔ Ensure correct rating 👉 Quick and simple. --- ### ⚠️ **Important Notes** ❗ Always replace with the same amperage ❗ Incorrect fuse rating may damage equipment --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Other fuse ratings - Fuse holders - Power leads & accessories - Radio parts --- ### 🔥 **Order Today** **Protect your equipment. Keep it running safely.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/10a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/10a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/10a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/10a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2010A%20Glass%20Fuse%2032mm%20x%206mm%20Quick%20blow%20Pack%20of%2010%20fuses&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F10a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/10a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/10a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/10a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [2A Glass Fuse 32mm x 6mm Quick blow Pack of 10 fuses](https://cbradio.co.uk/product/2a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌⚡ **10x 2A Glass Fuses 32mm x 6mm – Quick Blow Fuse Pack – CB Radio Replacement** **Reliable Protection • Fast Acting • Essential Spare** This **pack of 10 quick-blow 2A glass fuses** is ideal for **protecting CB radios and other electronic equipment** from overload and short circuits. 👉 A must-have for **any radio setup or toolbox**. --- ### 🔥 **Why Choose These Fuses** ✔ **Quick Blow (Fast Acting Protection)** ✔ **Ideal for CB Radios & Electronics** ✔ **Standard Size – Easy Replacement** ✔ **Great Value 10 Pack** --- ### ✅ **Key Features** ✔ **2 Amp Rating** ✔ **32mm x 6mm Glass Fuse** ✔ **Fast Acting / Quick Blow Type** ✔ **Clear Glass Body for Easy Inspection** --- ### 📡 **Perfect For** - CB radios - Amateur (Ham) radio equipment - Power supplies - General electronics --- ### ⚙️ **Specifications** - Type: **Glass Fuse (Quick Blow)** - Rating: **2 Amp (2A)** - Size: **32mm x 6mm** - Quantity: **Pack of 10** --- ### 💡 **Why Use Quick Blow Fuses** ✔ Protects sensitive electronics instantly ✔ Prevents damage from surges ✔ Easy to replace when blown 👉 Essential for **safe operation**. --- ### 🔧 **Installation** ✔ Remove old fuse ✔ Insert new fuse ✔ Ensure correct rating 👉 Simple and quick replacement. --- ### ⚠️ **Important Notes** ❗ Always replace with correct amperage ❗ Using incorrect fuse may damage equipment --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Other fuse ratings - Power leads & accessories - CB radio parts - Connectors & cables --- ### 🔥 **Order Today** **Protect your gear. Stay powered. Stay safe.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202A%20Glass%20Fuse%2032mm%20x%206mm%20Quick%20blow%20Pack%20of%2010%20fuses&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [Desktop Scanner Antenna SkyScan V1300 rg58 BNC Plug air band aerial](https://cbradio.co.uk/product/desktop-scanner-antenna-skyscan-v1300-rg58-bnc-plug-air-band-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🛰 **SkyScan V1300 Desktop Scanner Antenna – Wideband 25–2000MHz – BNC Plug – Airband Ready** **Wideband • Compact • Excellent Reception** The **SkyScan V1300** is a **desktop discone-style scanner antenna** designed for **wideband reception**, making it ideal for **airband, scanner, and general listening use**. 👉 A **top choice for enthusiasts** wanting strong reception without a large outdoor install. --- ### 🔥 **Why Choose the SkyScan V1300** ✔ **Wideband Coverage (25–2000 MHz)** ✔ **Discone Design for All-Round Reception** ✔ **Compact Indoor-Friendly Size** ✔ **Magnetic Base for Flexible Mounting** ✔ **Made in the UK** --- ### 📡 **Performance Highlights** - Frequency Range: **25 – 2000 MHz** - Type: **Discone Style Receiving Antenna** - Omnidirectional reception 👉 Ideal for picking up a **wide range of signals**. --- ### ✈️ **Perfect For** - Airband listening *(e.g. RAF bases like Lakenheath & Marham)* - Radio scanners - Civil aviation monitoring - General wideband reception --- ### 🏠 **Indoor & Mobile Use** ✔ Use indoors for improved reception ✔ Mount on metal surface via magnetic base ✔ Use on vehicle when stationary 👉 A flexible **plug-and-play solution**. --- ### ⚙️ **Specifications** - Type: **Desktop Discone Antenna** - Frequency: **25–2000 MHz** - Height: **Approx. 70 cm** - Base: **125mm Heavy Duty Magnetic Base** - Cable: **4 Metres RG58 (Mil Spec)** - Connector: **BNC Male (Fitted)** --- ### 💡 **Why Discone Antennas Work So Well** ✔ Wide frequency coverage ✔ No tuning required ✔ Consistent performance across bands 👉 A **true all-round antenna**. --- ### 🔧 **Installation** ✔ Assemble antenna (simple setup) ✔ Place on metal surface or desk ✔ Connect to scanner 👉 Ready in minutes. --- ### ⚠️ **Important Notes** ❗ Receive-only antenna (not for transmitting) ❗ Assembly required on delivery --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to assemble --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Scanner radios - BNC adaptors - Coax cable - Mounting options --- ### 🔥 **Order Today** **Hear more. Pick up everything. Stay connected.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/desktop-scanner-antenna-skyscan-v1300-rg58-bnc-plug-air-band-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/desktop-scanner-antenna-skyscan-v1300-rg58-bnc-plug-air-band-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/desktop-scanner-antenna-skyscan-v1300-rg58-bnc-plug-air-band-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/desktop-scanner-antenna-skyscan-v1300-rg58-bnc-plug-air-band-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Desktop%20Scanner%20Antenna%20SkyScan%20V1300%20rg58%20BNC%20Plug%20air%20band%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdesktop-scanner-antenna-skyscan-v1300-rg58-bnc-plug-air-band-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/desktop-scanner-antenna-skyscan-v1300-rg58-bnc-plug-air-band-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/desktop-scanner-antenna-skyscan-v1300-rg58-bnc-plug-air-band-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/desktop-scanner-antenna-skyscan-v1300-rg58-bnc-plug-air-band-aerial/?share=telegram) - **Product categories:** Scanners and Aerials --- ### [Toyota Landcruiser 4.2 TD set of New rear Prop-Shaft UJ 'S HDJ80 Hardy spider](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-rear-prop-shaft-uj-s-hdj80-hardy-spider/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Rear Propshaft UJ Kit (Set of 2) – Toyota Land Cruiser 80 Series 4.2 TD HDJ80 – Toyo Greasable Universal Joints** **Heavy Duty • Greasable • Genuine Japanese Quality** This **set of 2 Toyo universal joints (UJ / Hardy Spicer type)** is designed for the **rear propshaft** of the **HDJ80 4.2 TD Land Cruiser**. 👉 Built to handle **heavy loads and off-road use** with **long-lasting performance**. --- ### 🔥 **Why Choose These UJs** ✔ **Genuine Japanese Toyo Brand** ✔ **Heavy Duty Greasable Design** ✔ **Smooth & Reliable Operation** ✔ **Built for Off-Road & Towing Use** --- ### 📦 **What’s Included** ✔ **2 x Rear Propshaft Universal Joints** 👉 Complete set for **rear propshaft replacement**. --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 80 Series - Engine: **4.2 TD (HDJ80)** 👉 Designed specifically for **rear prop shaft fitment**. --- ### ⚙️ **Specifications** - Type: **Universal Joint (UJ / Hardy Spicer Type)** - Position: **Rear Propshaft** - Quantity: **Set of 2** - Brand: **Toyo (Japan)** - Feature: **Greasable** --- ### 💡 **Why Choose Greasable UJs** ✔ Longer lifespan ✔ Serviceable with grease ✔ Better performance under load 👉 Ideal for **4×4 and heavy-duty use**. --- ### 🔍 **Common Fault Symptoms** ✔ Clunking when changing gear ✔ Vibration at speed ✔ Squeaking noise from propshaft 👉 Replace worn UJs to avoid **driveline damage**. --- ### 🔧 **Installation Notes** ✔ Press fit installation required ✔ Grease after fitting ✔ Ensure correct alignment 👉 Professional fitting recommended. --- ### ⚠️ **Important Notes** ❗ Genuine Toyo – NOT “Japan Spec” copies ❗ Ensure compatibility before purchase --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Front propshaft UJs - Land Cruiser parts - Bearings & seals - 4×4 service kits --- ### 🔥 **Order Today** **Smooth drive. Strong build. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-rear-prop-shaft-uj-s-hdj80-hardy-spider/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-rear-prop-shaft-uj-s-hdj80-hardy-spider/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-rear-prop-shaft-uj-s-hdj80-hardy-spider/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-rear-prop-shaft-uj-s-hdj80-hardy-spider/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20Landcruiser%204.2%20TD%20set%20of%20New%20rear%20Prop-Shaft%20UJ%20%27S%20HDJ80%20Hardy%20spider&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-4-2-td-set-of-new-rear-prop-shaft-uj-s-hdj80-hardy-spider%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-rear-prop-shaft-uj-s-hdj80-hardy-spider/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-rear-prop-shaft-uj-s-hdj80-hardy-spider/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-rear-prop-shaft-uj-s-hdj80-hardy-spider/?share=telegram) - **Product categories:** Land Cruiser --- ### [3/8 Banjo Adaptor Converts 3/8 aerial to DV-27 mount](https://cbradio.co.uk/product/3-8-banjo-adaptor-converts-3-8-aerial-to-dv-27-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔩📡 **DV to 3/8 Banjo Adaptor – Sirio Type – Angle Adjustable CB Antenna Converter** **Convert • Adjust • Improve Fitment** This **Sirio-type DV to 3/8 banjo adaptor** allows you to **convert DV mount antennas to standard 3/8 thread**, giving you the flexibility to **angle your aerial for clearance and positioning**. 👉 Perfect for **truckers, 4×4 users, and custom installs**. --- ### 🔥 **Why Choose This Adaptor** ✔ **Converts DV Mount to 3/8 Thread** ✔ **Allows Adjustable Angle Setup** ✔ **Strong & Durable Construction** ✔ **Improves Aerial Positioning** --- ### ✅ **Key Features** ✔ **DV to 3/8 Thread Conversion** ✔ **Banjo Style Fitting** ✔ **Angle Adjustable (with wing nut & bolt)** ✔ **Compatible with Standard 3/8 Aerials** --- ### 🚛 **Perfect For** - Trucks & HGVs - 4×4 & off-road vehicles - Vans & pickups - Tight clearance areas (bridges, trees, car parks) --- ### 💡 **Why You Need This** ✔ Angle aerial to avoid obstacles ✔ Improve mounting position ✔ Convert between DV and 3/8 systems 👉 A simple upgrade with **real-world benefits**. --- ### ⚙️ **Specifications** - Type: **DV to 3/8 Banjo Adaptor** - Compatibility: **DV Mounts & 3/8 Thread Aerials** - Function: **Angle Adjustment + Thread Conversion** --- ### 🔧 **Installation** ✔ Fit to DV mount ✔ Attach aerial to 3/8 thread ✔ Adjust angle and tighten 👉 Quick and easy setup. --- ### ⚠️ **Important Notes** ❗ Requires DV mount and 3/8 aerial ❗ Ensure securely tightened before use --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - DV mounts & adapters - CB antennas - Coax cable & connectors - Mounting brackets --- ### 🔥 **Order Today** **Convert it. Angle it. Make it work.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-8-banjo-adaptor-converts-3-8-aerial-to-dv-27-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-8-banjo-adaptor-converts-3-8-aerial-to-dv-27-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-8-banjo-adaptor-converts-3-8-aerial-to-dv-27-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-8-banjo-adaptor-converts-3-8-aerial-to-dv-27-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%2F8%20Banjo%20Adaptor%20Converts%203%2F8%20aerial%20to%20DV-27%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-8-banjo-adaptor-converts-3-8-aerial-to-dv-27-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-8-banjo-adaptor-converts-3-8-aerial-to-dv-27-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-8-banjo-adaptor-converts-3-8-aerial-to-dv-27-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-8-banjo-adaptor-converts-3-8-aerial-to-dv-27-mount/?share=telegram) - **Product categories:** CB radio Accessories --- ### [TDA1905 ST IC 5W Audio Amplifier chip Amp with muting CB Radio](https://cbradio.co.uk/product/tda1905-st-ic-5w-audio-amplifier-chip-amp-with-muting-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔊🔧 **TDA1905 Audio Amplifier IC – 5W Amp Chip with Muting – CB Radio Replacement (ST)** **Reliable Replacement • Clear Audio • Essential Repair Part** The **TDA1905 Audio Amplifier IC** is a **5W audio amplifier chip with built-in muting**, commonly used in **CB radios and audio circuits**. 👉 Ideal for **repairing faulty audio stages** and restoring sound output. --- ### 🔥 **Why Choose This IC** ✔ **5W Audio Output Power** ✔ **Built-In Muting Function** ✔ **Stable & Reliable Performance** ✔ **Direct Replacement for Many Radios** --- ### 📡 **Common Applications** - CB radio repairs - Audio amplifier circuits - Replacement for faulty output stages - DIY electronics projects 👉 Frequently found in radios such as the **Lincoln and similar models**. --- ### ⚙️ **Key Features** ✔ **Output Power: 5 Watts** ✔ **Integrated Muting Circuit** ✔ **Compact IC Design** ✔ **Low Distortion Audio Output** --- ### 💡 **Why Replace the Audio IC** ✔ Restore lost or distorted sound ✔ Fix no-audio faults ✔ Improve overall audio clarity 👉 A common fix for **silent or weak audio radios**. --- ### 🔧 **Installation** ✔ Remove faulty IC ✔ Solder replacement in place ✔ Ensure proper heat dissipation 👉 Suitable for **electronics repair users**. --- ### ⚠️ **Important Notes** ❗ Requires soldering skills ❗ Ensure correct orientation when fitting ❗ Static precautions recommended --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - CB radio parts - Microphone plugs - Connectors & cables - Repair accessories --- ### 🔥 **Order Today** **Fix the sound. Bring your radio back to life.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tda1905-st-ic-5w-audio-amplifier-chip-amp-with-muting-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tda1905-st-ic-5w-audio-amplifier-chip-amp-with-muting-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tda1905-st-ic-5w-audio-amplifier-chip-amp-with-muting-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tda1905-st-ic-5w-audio-amplifier-chip-amp-with-muting-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TDA1905%20ST%20IC%205W%20Audio%20Amplifier%20chip%20Amp%20with%20muting%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftda1905-st-ic-5w-audio-amplifier-chip-amp-with-muting-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tda1905-st-ic-5w-audio-amplifier-chip-amp-with-muting-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tda1905-st-ic-5w-audio-amplifier-chip-amp-with-muting-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tda1905-st-ic-5w-audio-amplifier-chip-amp-with-muting-cb-radio/?share=telegram) - **Product categories:** CB radio Accessories --- ### [SQBM100 2m 70cm 144 430MHz Dual Band Amateur Radio Antenna colinear](https://cbradio.co.uk/product/sqbm100-2m-70cm-144-430mhz-dual-band-amateur-radio-antenna-colinear/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🗼 **Dual Band Colinear Base Antenna 144/430MHz – 2m/70cm High Gain Fibreglass (X30 Style)** **Compact • High Gain • Dual Band Performance** The **SQBM100N Colinear Base Antenna** is a **high-performance dual band base antenna** for **2m (144MHz) and 70cm (430MHz)** operation. 👉 Ideal for **amateur radio operators looking for strong, reliable base station performance**. --- ### 🔥 **Why Choose This Antenna** ✔ **Dual Band Operation (2m & 70cm)** ✔ **High Gain for Improved Range** ✔ **Compact 1.05m Design** ✔ **Fibreglass Encapsulated for Durability** ✔ **Easy Mast Mount Installation** --- ### 📡 **Performance Highlights** - Frequency: **144 / 430 MHz (2m / 70cm)** - Gain: - **2m: 4.5 dB** - **70cm: 7.2 dB** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 200W** 👉 Strong performance across both bands. --- ### ⚙️ **Specifications** - Type: **Colinear Base Antenna** - Bands: **Dual Band 2m / 70cm** - Design: - **2m: 1/2 Wave** - **70cm: 2 x 5/8 Wave** - Ground Plane: **3 Radials** - Length: **1.05 Metres** - Weight: **1.1 kg** - Mast Size: **30 – 62 mm Diameter** - Construction: **Fibreglass Encapsulated** --- ### 🗼 **Perfect For** - Base station setups - Amateur (Ham) radio users - Home installations - Portable mast setups --- ### 💡 **Why Choose a Colinear Antenna** ✔ Improved gain over simple verticals ✔ Better signal reach ✔ Reliable omni-directional coverage 👉 Great balance of **performance and size**. --- ### 🔧 **Installation** ✔ Mount to mast (30–62mm) ✔ Connect coax cable ✔ Position as high as possible 👉 Quick and straightforward setup. --- ### ⚠️ **Important Notes** ❗ Requires coax cable (not included) ❗ Ensure correct mounting for best performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable (RG213 / Mini 8) - Connectors & adaptors - Mast poles & brackets - SWR meters --- ### 🔥 **Order Today** **Compact size. Strong signal. Reliable performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sqbm100-2m-70cm-144-430mhz-dual-band-amateur-radio-antenna-colinear/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sqbm100-2m-70cm-144-430mhz-dual-band-amateur-radio-antenna-colinear/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sqbm100-2m-70cm-144-430mhz-dual-band-amateur-radio-antenna-colinear/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sqbm100-2m-70cm-144-430mhz-dual-band-amateur-radio-antenna-colinear/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SQBM100%202m%2070cm%20144%20430MHz%20Dual%20Band%20Amateur%20Radio%20Antenna%20colinear&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsqbm100-2m-70cm-144-430mhz-dual-band-amateur-radio-antenna-colinear%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sqbm100-2m-70cm-144-430mhz-dual-band-amateur-radio-antenna-colinear/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sqbm100-2m-70cm-144-430mhz-dual-band-amateur-radio-antenna-colinear/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sqbm100-2m-70cm-144-430mhz-dual-band-amateur-radio-antenna-colinear/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [4 X self adhesive Stick on rubber Feet](https://cbradio.co.uk/product/4-x-self-adhesive-stick-on-rubber-feet/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔲🔧 **4x Adhesive Rubber Feet Pads – Stick-On Anti-Slip Feet – CB Radio / SWR Meter / Equipment** **Anti-Slip • Shock Absorbing • Easy Fit** This **pack of 4 square adhesive rubber feet** is perfect for adding **stability, grip, and clearance** to your radio equipment. 👉 Ideal for **CB radios, HAM gear, SWR meters, and bench microphones**. --- ### 🔥 **Why Choose These Rubber Feet** ✔ **Strong 3M Adhesive Backing** ✔ **Anti-Slip & Vibration Reducing** ✔ **Adds Clearance for Speakers & Ventilation** ✔ **Quick & Easy Installation** --- ### ✅ **Key Features** ✔ **Pack of 4 Rubber Feet** ✔ **Square Design** ✔ **Durable & Long Lasting** ✔ **Shock Absorbing Material** ✔ **Pre-Applied 3M Double-Sided Tape** --- ### 📡 **Perfect For** - CB radios - Amateur (Ham) radios - SWR meters - Bench microphones - Power supplies & small equipment --- ### ⚙️ **Specifications** - Type: **Adhesive Rubber Feet** - Quantity: **4 Pack** - Shape: **Square** - Adhesive: **3M Double-Sided Tape** --- ### 💡 **Why Use Rubber Feet** ✔ Prevents sliding on smooth surfaces ✔ Protects surfaces from scratches ✔ Improves airflow under equipment ✔ Reduces vibration and noise 👉 Small upgrade, **big difference**. --- ### 🔧 **Installation** ✔ Clean surface ✔ Peel backing ✔ Stick in position 👉 Done in seconds. --- ### ⚠️ **Important Notes** ❗ Ensure surface is clean and dry before fitting ❗ Allow adhesive to bond properly before use --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Radio accessories - Mounting brackets - Coax cable & connectors - SWR meters --- ### 🔥 **Order Today** **Stick it. Stabilise it. Protect your gear.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-x-self-adhesive-stick-on-rubber-feet/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-x-self-adhesive-stick-on-rubber-feet/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-x-self-adhesive-stick-on-rubber-feet/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-x-self-adhesive-stick-on-rubber-feet/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20X%20self%20adhesive%20Stick%20on%20rubber%20Feet&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-x-self-adhesive-stick-on-rubber-feet%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-x-self-adhesive-stick-on-rubber-feet/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-x-self-adhesive-stick-on-rubber-feet/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-x-self-adhesive-stick-on-rubber-feet/?share=telegram) - **Product categories:** Amateur Radio Accessories, CB radio Accessories --- ### [8 Pin Mic Microphone plug CB or HAM Radio](https://cbradio.co.uk/product/8-pin-mic-microphone-plug-cb-or-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔌 **8 Pin Microphone Plug – CB & HAM Radio Mic Connector – Kenwood Icom Yaesu Compatible** **Reliable • Universal Fit • Easy Replacement** This **8 pin microphone plug** is a **high-quality aftermarket connector**, ideal for **repairing or building microphone leads** for CB and amateur radios. 👉 Compatible with many radios from **Kenwood, Icom, and Yaesu**. --- ### 🔥 **Why Choose This Mic Plug** ✔ **8 Pin Standard Configuration** ✔ **Strong & Reliable Connection** ✔ **Ideal for Repairs or Custom Builds** ✔ **Compatible with Major Radio Brands** --- ### ✅ **Key Features** ✔ **8 Contact Microphone Plug** ✔ **Durable Construction** ✔ **Easy to Solder & Assemble** ✔ **Aftermarket Quality Replacement** --- ### 📡 **Perfect For** - CB radio microphones - Amateur (Ham) radio mics - Replacing damaged plugs - Custom microphone builds --- ### ⚙️ **Specifications** - Type: **8 Pin Microphone Plug** - Contacts: **8 Pin** - Compatibility: **Various CB & Ham Radios** --- ### 💡 **Common Uses** ✔ Repairing broken mic leads ✔ Converting microphones ✔ Building custom radio setups 👉 A must-have for **radio enthusiasts and installers**. --- ### 🔧 **Installation** ✔ Strip cable ✔ Solder wires to pins ✔ Assemble plug housing 👉 Straightforward for DIY or professional use. --- ### ⚠️ **Important Notes** ❗ Wiring configuration may vary by radio model ❗ Check pinout before soldering --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - 4, 5, 6 & 7 pin mic plugs - Coax cable & connectors - CB radios & accessories - Tools & installation parts --- ### 🔥 **Order Today** **Fix it. Build it. Keep talking.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/8-pin-mic-microphone-plug-cb-or-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/8-pin-mic-microphone-plug-cb-or-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/8-pin-mic-microphone-plug-cb-or-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/8-pin-mic-microphone-plug-cb-or-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%208%20Pin%20Mic%20Microphone%20plug%20CB%20or%20HAM%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F8-pin-mic-microphone-plug-cb-or-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/8-pin-mic-microphone-plug-cb-or-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/8-pin-mic-microphone-plug-cb-or-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/8-pin-mic-microphone-plug-cb-or-ham-radio/?share=telegram) - **Product categories:** Microphone Plugs --- ### [Wheel bearing kit front Toyota Landcruiser 40 60 70 80 series NTN](https://cbradio.co.uk/product/wheel-bearing-kit-front-toyota-landcruiser-40-60-70-80-series-ntn/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Front Wheel Bearing Kit – Toyota Land Cruiser 40 Series / Toyota Land Cruiser 60 Series / Toyota Land Cruiser 70 Series / Toyota Land Cruiser 80 Series / Toyota Land Cruiser 105 Series – KOYO / NTN** **OEM Quality • Japanese Bearings • Built to Last** This **front wheel bearing kit** includes **premium Japanese OEM bearings (KOYO / NTN)**, designed for **reliability, durability, and smooth operation** across a wide range of Land Cruiser models. 👉 Trusted quality used by **professionals worldwide**. --- ### 🔥 **Why Choose This Bearing Kit** ✔ **OEM Japanese Bearings (KOYO / NTN)** ✔ **High Precision & Long Life** ✔ **Smooth & Reliable Performance** ✔ **Direct Replacement Fit** --- ### 📦 **What’s Included (Per Kit)** ✔ **1 x Inner Wheel Bearing (Cup & Cone)** ✔ **1 x Outer Wheel Bearing (Cup & Cone)** ✔ **1 x Hub Seal** ❗ *1 kit = 1 wheel (order 2 kits for both sides)* --- ### 🚗 **Vehicle Compatibility** Fits a wide range of: - Toyota Land Cruiser 40 Series (1975-on) - Toyota Land Cruiser 50 Series - Toyota Land Cruiser 60 Series (1980–1989) - Toyota Land Cruiser 70 Series (1984-on) - Toyota Land Cruiser 80 Series - Toyota Land Cruiser 105 Series *(solid axle models only)* 👉 Covers models from **1975 through to 2009** --- ### ⚙️ **Specifications** - Position: **Front Wheel Bearing Kit** - Fitment: **Left or Right Side** - Quality: **OEM Japanese (KOYO / NTN or equivalent)** --- ### 💡 **Why Replace Wheel Bearings** ✔ Eliminates noise & vibration ✔ Restores smooth wheel rotation ✔ Prevents hub damage ✔ Essential for safe driving 👉 Don’t ignore worn bearings. --- ### 🔍 **Common Fault Symptoms** ✔ Grinding or humming noise ✔ Play in wheel ✔ Uneven tyre wear ✔ MOT failure --- ### 🔧 **Installation Notes** ✔ Requires hub removal ✔ Grease bearings before installation ✔ Torque correctly to spec 👉 Professional fitting recommended if unsure. --- ### ⚠️ **Important Notes** ❗ Brand supplied depends on stock (KOYO / NTN equivalent) ❗ Suitable for **solid front axle models only (105 series)** ❗ Order **2 kits for both sides** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Rear bearing kits - Land Cruiser parts - Seals & hubs - 4×4 service items --- ### 🔥 **Order Today** **OEM quality. Smooth drive. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/wheel-bearing-kit-front-toyota-landcruiser-40-60-70-80-series-ntn/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/wheel-bearing-kit-front-toyota-landcruiser-40-60-70-80-series-ntn/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/wheel-bearing-kit-front-toyota-landcruiser-40-60-70-80-series-ntn/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/wheel-bearing-kit-front-toyota-landcruiser-40-60-70-80-series-ntn/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Wheel%20bearing%20kit%20front%20Toyota%20Landcruiser%2040%2060%2070%2080%20series%20NTN&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fwheel-bearing-kit-front-toyota-landcruiser-40-60-70-80-series-ntn%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/wheel-bearing-kit-front-toyota-landcruiser-40-60-70-80-series-ntn/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/wheel-bearing-kit-front-toyota-landcruiser-40-60-70-80-series-ntn/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/wheel-bearing-kit-front-toyota-landcruiser-40-60-70-80-series-ntn/?share=telegram) - **Product categories:** Land Cruiser --- ### [Poly bush kit Toyota Landcruiser 4.2 TD front axle HDJ80](https://cbradio.co.uk/product/poly-bush-kit-toyota-landcruiser-4-2-td-front-axle-hdj80/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Front Axle Poly Bush Kit for Toyota Land Cruiser 80 Series 4.2 TD HDJ80 – Radius Arm & Panhard** **Heavy Duty • Long Life • Improved Handling** Upgrade your suspension with this **high-quality front axle poly bush kit**, designed for the **HDJ80 4.2 TD Land Cruiser**. 👉 Built from **tough thermoplastic polyurethane**, these bushes offer **superior durability and performance over standard rubber**. --- ### 🔥 **Why Choose Poly Bushes** ✔ **Stronger Than Rubber** ✔ **Longer Lasting – Resistant to Wear & Oil** ✔ **Improved Handling & Stability** ✔ **Maintains Shape Under Load** --- ### 📦 **What’s Included** ✔ **Front Radius Arm Bushes (Front & Rear)** ✔ **Front Panhard Rod Bushes** ✔ **Fixing Bolts & Nuts Included** ❗ *Does NOT include anti-roll bar bushes* --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 80 Series - Engine: **4.2 TD (HDJ80)** 👉 Designed for **front axle suspension components**. --- ### ⚙️ **Specifications** - Material: **Thermoplastic Polyurethane (Poly Bush)** - Colour: **Orange** - Position: **Front Axle** - Kit Weight: **Approx. 3.9 kg** --- ### 💡 **Performance Benefits** ✔ Improved steering response ✔ Reduced axle movement ✔ Better off-road durability ✔ Increased lifespan vs OEM rubber 👉 Ideal for **off-road, towing, and heavy-duty use**. --- ### 🔧 **Location on Vehicle** ✔ Radius arms (front & rear bushes) ✔ Panhard rod (front axle to chassis link) 👉 Key components for **axle stability and alignment**. --- ### ⚠️ **Important Notes** ❗ Anti-roll bar bushes not included ❗ Professional fitting recommended ❗ Tightening should be done at ride height --- ### 📦 **Shipping Info** ✔ Heavy duty kit (3.9kg) ✔ Secure packaging ✔ Fast UK dispatch --- ### 💬 **More Parts Available** 👉 Check our shop for: - Rear bush kits - Suspension components - Land Cruiser parts - 4×4 upgrades --- ### 🔥 **Order Today** **Stronger bushes. Better control. Built for the job.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/poly-bush-kit-toyota-landcruiser-4-2-td-front-axle-hdj80/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/poly-bush-kit-toyota-landcruiser-4-2-td-front-axle-hdj80/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/poly-bush-kit-toyota-landcruiser-4-2-td-front-axle-hdj80/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/poly-bush-kit-toyota-landcruiser-4-2-td-front-axle-hdj80/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Poly%20bush%20kit%20Toyota%20Landcruiser%204.2%20TD%20front%20axle%20HDJ80&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpoly-bush-kit-toyota-landcruiser-4-2-td-front-axle-hdj80%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/poly-bush-kit-toyota-landcruiser-4-2-td-front-axle-hdj80/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/poly-bush-kit-toyota-landcruiser-4-2-td-front-axle-hdj80/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/poly-bush-kit-toyota-landcruiser-4-2-td-front-axle-hdj80/?share=telegram) - **Product categories:** Land Cruiser --- ### [lower front control arm ball-joint for toyota landcruiser amazon lexus lx470](https://cbradio.co.uk/product/lower-front-control-arm-ball-joint-for-toyota-landcruiser-amazon-lexus-lx470/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Front Lower Ball Joint – Toyota Land Cruiser 100 Series / Lexus LX470 – Suspension Arm Joint** **Strong • Reliable • OE Quality Replacement** This **front lower control arm ball joint** is a **high-quality aftermarket replacement**, designed to restore **safe steering, suspension performance, and handling**. 👉 Essential for maintaining **vehicle stability and safety**. --- ### 🔥 **Why Choose This Ball Joint** ✔ **High Quality Aftermarket Part** ✔ **Direct Replacement Fit** ✔ **Restores Steering & Suspension Performance** ✔ **Built to Meet or Exceed OE Standards** --- ### 🚗 **Vehicle Compatibility** - Lexus LX470 (UZJ100) – **1998–2007** - Toyota Land Cruiser 100 Series (HDJ101 / UZJ100) – **1998–2008** 👉 Fits **front lower control arm** --- ### 🔧 **What This Part Does** ✔ Connects the control arm to the steering knuckle ✔ Allows smooth suspension movement ✔ Maintains wheel alignment and control 👉 Critical for **safe driving and handling**. --- ### ⚙️ **Specifications** - Type: **Lower Ball Joint** - Position: **Front Lower Suspension Arm** - Quantity: **1 x Ball Joint** - Quality: **Aftermarket – OE Standard or Better** --- ### 💡 **Common Fault Symptoms** ✔ Knocking or clunking noise ✔ Uneven tyre wear ✔ Loose or vague steering ✔ MOT failure 👉 Replace worn joints to avoid **serious safety issues**. --- ### 🔧 **Installation Notes** ✔ Professional fitting recommended ✔ Wheel alignment required after installation ✔ Check both sides for wear --- ### ⚠️ **Important Notes** ❗ Ensure correct fitment for your vehicle ❗ Listing is for **1 ball joint only** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Suspension components - Land Cruiser & Lexus parts - Bushes & arms - Service items --- ### 🔥 **Order Today** **Fix the play. Restore control. Drive safely.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/lower-front-control-arm-ball-joint-for-toyota-landcruiser-amazon-lexus-lx470/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/lower-front-control-arm-ball-joint-for-toyota-landcruiser-amazon-lexus-lx470/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/lower-front-control-arm-ball-joint-for-toyota-landcruiser-amazon-lexus-lx470/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/lower-front-control-arm-ball-joint-for-toyota-landcruiser-amazon-lexus-lx470/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20lower%20front%20control%20arm%20ball-joint%20for%20toyota%20landcruiser%20amazon%20lexus%20lx470&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flower-front-control-arm-ball-joint-for-toyota-landcruiser-amazon-lexus-lx470%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/lower-front-control-arm-ball-joint-for-toyota-landcruiser-amazon-lexus-lx470/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/lower-front-control-arm-ball-joint-for-toyota-landcruiser-amazon-lexus-lx470/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/lower-front-control-arm-ball-joint-for-toyota-landcruiser-amazon-lexus-lx470/?share=telegram) - **Product categories:** Land Cruiser --- ### [Sirio SY27-3 3 element yagi DX beam antenna with gamma match](https://cbradio.co.uk/product/sirio-sy27-3-3-element-yagi-dx-beam-antenna-with-gamma-match/) **Published:** February 13, 2020 **Author:** Jan **Content:** **\*\*\*\*please check availability BEFORE ordering\*\*\*\*\*** ## 📡🗼 **Sirio SY 27-3 Yagi Beam Antenna – 3 Element 26.5–30 MHz – High Gain Directional Base** **Directional • High Gain • DX Performance** The **Sirio SY 27-3** is a **3-element Yagi beam antenna** designed for **CB (11m) and 10m band operation**, delivering **strong directional gain for long-distance (DX) communication**. 👉 A powerful upgrade from vertical antennas for **serious base station users**. --- ### ⚠️ **IMPORTANT** ❗ **PLEASE CHECK AVAILABILITY BEFORE ORDERING** --- ### 🔥 **Why Choose the SY 27-3** ✔ **Directional High Gain Performance (8.5 dBd / 10.65 dBi)** ✔ **Wide Tuneable Range (26.5 – 30 MHz)** ✔ **Vertical or Horizontal Mounting Options** ✔ **High Power Handling (Up to 1000W)** ✔ **Robust Aluminium Construction** --- ### 📡 **Performance Highlights** - Frequency Range: **26.5 – 30 MHz** - Gain: **8.5 dBd / 10.65 dBi** - Bandwidth: **~1800 kHz @ VSWR ≤ 2:1** - Factory tuned at mid-band - Impedance: **50 Ohms (Unbalanced)** 👉 Ideal for **DXing and directional communication**. --- ### 🎯 **Directional Advantage** ✔ Focuses signal in one direction ✔ Reduces unwanted interference ✔ Improves transmit and receive range 👉 Perfect for **long-distance contacts**. --- ### ⚙️ **Specifications** - Type: **3 Element Yagi Beam Antenna** - Polarisation: **Horizontal (or vertical mountable)** - Feed System: **Gamma Match (Centre Feed)** - Connector: **UHF Female (SO239)** - Max Power: **1000 Watts** --- ### 🔩 **Build Quality** ✔ Aluminium elements ✔ Waterproof jointing sleeves ✔ Steel & nylon hardware ✔ Designed for **outdoor durability** --- ### 🌬 **Dimensions & Wind Data** - Boom Length: **2710 mm** - Max Element Length: **~5845 mm** - Turning Radius: **~3350 mm** - Weight: **~4.7 kg** - Wind Load: **86N @ 150 km/h** - Mast Size: **35–50 mm diameter** --- ### 🗼 **Installation Requirements** ✔ Suitable for **base station setups** ✔ Mast required (35–50mm) ✔ Rotor recommended for beam steering --- ### 💡 **Why Choose a Yagi Beam** ✔ Higher gain than vertical antennas ✔ Directional control ✔ Better long-distance performance 👉 A **serious performance upgrade**. --- ### ⚠️ **Important Notes** ❗ Large antenna – ensure adequate space ❗ Mast and rotor not included ❗ Professional installation recommended --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mast poles & guy kits - Rotators - Coax cable (RG213 / LMR400) - SWR meters & accessories --- ### 🔥 **Order Today** **Aim it. Power it. Reach further.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-sy27-3-3-element-yagi-dx-beam-antenna-with-gamma-match/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-sy27-3-3-element-yagi-dx-beam-antenna-with-gamma-match/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-sy27-3-3-element-yagi-dx-beam-antenna-with-gamma-match/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-sy27-3-3-element-yagi-dx-beam-antenna-with-gamma-match/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20SY27-3%203%20element%20yagi%20DX%20beam%20antenna%20with%20gamma%20match&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-sy27-3-3-element-yagi-dx-beam-antenna-with-gamma-match%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-sy27-3-3-element-yagi-dx-beam-antenna-with-gamma-match/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-sy27-3-3-element-yagi-dx-beam-antenna-with-gamma-match/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-sy27-3-3-element-yagi-dx-beam-antenna-with-gamma-match/?share=telegram) - **Product categories:** Homebase Aerials --- ### [CRT SS6900NV V7 UK40 pre Programmed AM FM SSB Superstar SS 6900 nv](https://cbradio.co.uk/product/crt-ss6900n-v6-uk40-pre-programmed-am-fm-ssb-superstar-ss-6900-n/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📻 **SS6900 Multi-Mode 10m / 11m Radio – AM/FM/SSB/CW – Blue Display – UK 40 Pre-Programmed** **High Power • Fully Programmable • Feature Packed** The **SS6900 (Blue Display Version)** is a **powerful multi-mode transceiver** designed for **serious radio users**, offering **high output, full programmability, and a wide frequency range**. 👉 Supplied **pre-programmed with UK 40 (Band F)** for convenience. --- ### ⚠️ **IMPORTANT NOTICE** ❗ Due to CRT’s ridiculously high shipping costs post-Brexit, we no longer supply CRT branded versions 👉 See our **Anytone equivalent (same platform, includes programming cable)** ❗ Supplied as **10m Amateur Radio (28–29.7 MHz)** ❗ Expanded/export frequencies available via programming ❗ **Use outside legal bands is NOT permitted in the UK** --- ### 🔥 **Why Choose the SS6900** ✔ **Multi-Mode (AM/FM/USB/LSB/CW/PA)** ✔ **High Output Power** ✔ **Pre-Programmed UK 40 Channels** ✔ **Large Blue LCD Display** ✔ **Fully Programmable Platform** --- ### 📡 **Frequency Coverage** - Standard: **28.000 – 29.700 MHz (10m band)** - Export: **25.615 – 28.305 MHz** **Pre-Programmed Bands:** - Band A: 25.615 – 26.055 MHz - Band B: 26.065 – 26.505 MHz - Band C: 26.515 – 26.955 MHz - Band D: 26.965 – 27.405 MHz - Band E: 27.415 – 27.855 MHz - **Band F: 27.60125 – 27.99125 MHz (UK 40)** --- ### ⚡ **Output Power** - **AM: 12W** - **FM: 40W** - **SSB: 30W** --- ### 🎛 **Standard Features** ✔ Blue 7-digit frequency display ✔ Blue LCD channel display & backlight ✔ S-Meter ✔ Automatic Squelch ✔ Dual Watch ✔ Emergency Channel ✔ Roger Beep ✔ RF Gain ✔ Built-in SWR Meter ✔ Noise Blanker & ANL ✔ +10 kHz Shift ✔ Voltage Protection (>16V) ✔ SWR Protection ✔ Echo Adjustment (delay & repeat) ✔ Power Level Adjustment (AM/FM) ✔ Multifunction Clarifier --- ### 🔧 **Programmable Features** ✔ Time-Out Timer (TOT) ✔ Frequency Steps (10Hz – 10kHz) ✔ Roger Beep Tone ✔ CW Tone ✔ Squelch Level Control ✔ Display Options (TX freq, SWR, power etc.) ✔ Voltage Protection Settings --- ### 🔓 **Export Mode Features** *(where permitted)* ✔ HI-CUT ✔ Scan Functions ✔ Keyboard Lock ✔ LCD Off ✔ S/RF Display Functions --- ### 🎤 **Microphone & Controls** ✔ 4-Pin Mic (UP/DOWN) ✔ Automatic Squelch ✔ Front panel controls for quick access --- ### 💡 **Why This Radio Stands Out** ✔ High power output ✔ Wide frequency flexibility ✔ Fully customisable via software ✔ Proven platform used worldwide 👉 A **serious upgrade for experienced users**. --- ### ⚠️ **Important Notes** ❗ Programming cable/software **NOT included** ❗ Reset/menu setup only available in export mode ❗ External antenna required (50Ω) --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Antennas & mounts - Power supplies - SWR meters - Coax cable & connectors --- ### 🔥 **Order Today** **Power. Control. Performance. Built for serious radio users.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/crt-ss6900n-v6-uk40-pre-programmed-am-fm-ssb-superstar-ss-6900-n/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/crt-ss6900n-v6-uk40-pre-programmed-am-fm-ssb-superstar-ss-6900-n/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/crt-ss6900n-v6-uk40-pre-programmed-am-fm-ssb-superstar-ss-6900-n/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/crt-ss6900n-v6-uk40-pre-programmed-am-fm-ssb-superstar-ss-6900-n/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CRT%20SS6900NV%20V7%20UK40%20pre%20Programmed%20AM%20FM%20SSB%20Superstar%20SS%206900%20nv&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcrt-ss6900n-v6-uk40-pre-programmed-am-fm-ssb-superstar-ss-6900-n%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/crt-ss6900n-v6-uk40-pre-programmed-am-fm-ssb-superstar-ss-6900-n/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/crt-ss6900n-v6-uk40-pre-programmed-am-fm-ssb-superstar-ss-6900-n/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/crt-ss6900n-v6-uk40-pre-programmed-am-fm-ssb-superstar-ss-6900-n/?share=telegram) - **Product categories:** Amateur Radio, CRT --- ### [Sirio SY27-4 4 elements 26.5 - 30 MHz Tuneable Yagi beam Antenna](https://cbradio.co.uk/product/sirio-sy-27-4-4-elements-26-5-30-mhz-tuneable-yagi-beam-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** **\*\*\*\*please check availability BEFORE ordering\*\*\*\*\*** ## 📡🗼 **Sirio SY 27-4 Yagi Beam Antenna – 4 Element 26.5–30 MHz – High Gain Directional Base Antenna** **High Gain • Directional • Serious Performance** The **Sirio SY 27-4** is a **4-element Yagi beam antenna** designed for **CB (11m) and 10m band operation**, delivering **exceptional gain and directional performance** for base station use. 👉 Built for users who want **maximum range and signal strength**. --- ### ⚠️ **IMPORTANT** ❗ **PLEASE CHECK AVAILABILITY BEFORE ORDERING** --- ### 🔥 **Why Choose the Sirio SY 27-4** ✔ **High Gain Directional Antenna (11 dBd / 13.15 dBi)** ✔ **Wide Tuneable Range (26.5 – 30 MHz)** ✔ **Handles High Power (Up to 3000W Peak)** ✔ **Heavy Duty Aluminium Construction** ✔ **Professional Base Station Performance** --- ### 📡 **Performance Highlights** - Frequency Range: **26.5 – 30 MHz (Tuneable)** - Gain: **11 dBd / 13.15 dBi** - SWR at Resonance: **≤ 1.2** - Bandwidth: **≥ 850 kHz @ SWR ≤ 2** 👉 Designed for **long-distance directional communication**. --- ### 🎯 **Directional Advantage** ✔ Focuses signal in one direction ✔ Reduces interference from other directions ✔ Increases effective transmit and receive range 👉 Ideal for **DXing and base station setups**. --- ### ⚙️ **Specifications** - Type: **4 Element Yagi Beam** - Polarisation: **Horizontal** - Impedance: **50 Ohms** - Feed System: **Gamma Match (Centre Feed)** - Connector: **UHF Female (SO239)** --- ### 🔩 **Build Quality** ✔ Aluminium alloy **6063 T-832** ✔ Waterproof jointing sleeves ✔ Zinc plated hardware ✔ Designed for **long-term outdoor use** --- ### 🌬 **Wind & Size Data** - Wind Load: **86N @ 150 km/h** - Wind Surface: **0.07 m²** - Boom Length: **4030 mm** - Max Element Length: **~5846 mm** - Turning Radius: **~3700 mm** - Weight: **~6.1 kg** --- ### 🗼 **Installation Requirements** ✔ Mast Size: **35–50 mm diameter** ✔ Rotor recommended for beam steering ✔ Suitable for **base station installations only** --- ### 💡 **Why Choose a Yagi Beam** ✔ Maximum gain vs omni antennas ✔ Directional control ✔ Improved long-distance performance 👉 A **serious upgrade over vertical antennas**. --- ### ⚠️ **Important Notes** ❗ Large antenna – ensure adequate space ❗ Professional installation recommended ❗ Mast & rotor not included --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mast poles & guy kits - Rotators - Coax cable (RG213 / LMR400) - SWR meters & accessories --- ### 🔥 **Order Today** **Point it. Power it. Reach further.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-sy-27-4-4-elements-26-5-30-mhz-tuneable-yagi-beam-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-sy-27-4-4-elements-26-5-30-mhz-tuneable-yagi-beam-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-sy-27-4-4-elements-26-5-30-mhz-tuneable-yagi-beam-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-sy-27-4-4-elements-26-5-30-mhz-tuneable-yagi-beam-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20SY27-4%204%20elements%2026.5%20-%2030%20MHz%20Tuneable%20Yagi%20beam%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-sy-27-4-4-elements-26-5-30-mhz-tuneable-yagi-beam-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-sy-27-4-4-elements-26-5-30-mhz-tuneable-yagi-beam-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-sy-27-4-4-elements-26-5-30-mhz-tuneable-yagi-beam-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-sy-27-4-4-elements-26-5-30-mhz-tuneable-yagi-beam-antenna/?share=telegram) - **Product categories:** Homebase Aerials --- ### [RG8 2m 50 Ohm Coaxial Patch Lead Mini8 Low Loss 2 metre jumper lead](https://cbradio.co.uk/product/rg8-2m-50-ohm-coaxial-patch-lead-mini8-low-loss-2-metre-jumper-lead/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **RG8 Mini 8 Coax Patch Lead 2m – Low Loss 50Ω Jumper Cable – PL259 to PL259** **Flexible • Low Loss • Hand Made Quality** This **2 metre RG8 (Mini 8 / RG8X) coaxial patch lead** is a **low loss, high quality cable**, ideal for **CB, amateur radio, and RF applications**. 👉 Built using **premium Mini 8 coax**, offering **RG213-like performance with RG58 flexibility**. --- ### 🔥 **Why Choose This Patch Lead** ✔ **Low Loss Performance** ✔ **Flexible & Easy to Route** ✔ **Hand Made in the UK** ✔ **High Quality Components** ✔ **Reliable Signal Transfer** --- ### ✅ **Key Features** ✔ **2 Metre (200cm) Length** ✔ **Mini 8 / RG8X Low Loss Coax** ✔ **50 Ohm Impedance** ✔ **PL259 Connectors Fitted Both Ends** ✔ **Strong & Durable Construction** --- ### 📡 **Perfect For** - CB radio setups - Amateur (Ham) radio - Base station connections - SWR meter linking - Equipment interconnects --- ### ⚙️ **Specifications** - Cable Type: **RG8 Mini (RG8X)** - Length: **2 Metres (200cm)** - Impedance: **50 Ohms** - Connectors: **PL259 to PL259** - Performance: **Low Loss** --- ### 💡 **Why Mini 8 (RG8X)** ✔ Lower loss than RG58 ✔ More flexible than RG213 ✔ Ideal balance of performance and usability 👉 A popular choice for **both mobile and base setups**. --- ### 🔧 **Typical Use** ✔ Radio to SWR meter ✔ SWR meter to antenna ✔ Equipment linking 👉 Essential for a **proper installation**. --- ### ⚠️ **Important Notes** ❗ Listing is for **patch lead only** ❗ Additional cable shown in images is for illustration of quality --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - SWR meters - Antennas & mounts - Coax cable reels - Connectors & adaptors --- ### 🔥 **Order Today** **Low loss. High quality. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg8-2m-50-ohm-coaxial-patch-lead-mini8-low-loss-2-metre-jumper-lead/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg8-2m-50-ohm-coaxial-patch-lead-mini8-low-loss-2-metre-jumper-lead/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg8-2m-50-ohm-coaxial-patch-lead-mini8-low-loss-2-metre-jumper-lead/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg8-2m-50-ohm-coaxial-patch-lead-mini8-low-loss-2-metre-jumper-lead/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG8%202m%2050%20Ohm%20Coaxial%20Patch%20Lead%20Mini8%20Low%20Loss%202%20metre%20jumper%20lead&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg8-2m-50-ohm-coaxial-patch-lead-mini8-low-loss-2-metre-jumper-lead%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg8-2m-50-ohm-coaxial-patch-lead-mini8-low-loss-2-metre-jumper-lead/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg8-2m-50-ohm-coaxial-patch-lead-mini8-low-loss-2-metre-jumper-lead/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg8-2m-50-ohm-coaxial-patch-lead-mini8-low-loss-2-metre-jumper-lead/?share=telegram) - **Product categories:** Patch Leads --- ### [Diff Pinion oil seal Hilux & Landcruiser 80 series Rear](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-rear/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Rear Differential Pinion Oil Seal – Toyota Land Cruiser 80 Series / Toyota Hilux – Japanese Quality** **Stop Leaks • OE Spec • Long Lasting** This **high-quality Japanese-made rear differential pinion oil seal** is designed for **Toyota Land Cruiser 80 Series and Hilux models**, providing a **reliable seal to prevent oil leaks from the prop shaft flange**. 👉 A must-have replacement to **protect your differential and maintain performance**. --- ### 🔥 **Why Choose This Oil Seal** ✔ **Premium Japanese Manufacture** ✔ **Meets or Exceeds OE Specification** ✔ **Designed for Rear Differential Use** ✔ **Durable & Long Service Life** --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 80 Series (HDJ80 / FZJ80) - Toyota Hilux 👉 Primarily for **rear differential**, but can also fit front *(see notes)* --- ### 🔧 **What This Part Does** ✔ Seals the **pinion shaft area** ✔ Prevents **diff oil leakage** ✔ Protects bearings from contamination 👉 Located between the **outer pinion bearing and prop shaft drive flange**. --- ### ⚙️ **Specifications** - Type: **Differential Pinion Oil Seal** - Position: **Rear Differential (Primary Use)** - Quality: **Japanese Manufactured – OE Standard** --- ### 💡 **Common Fault Symptoms** ✔ Oil leak at prop shaft flange ✔ Oil residue around diff input ✔ Low differential oil levels 👉 Replace early to avoid **expensive damage**. --- ### 🔍 **Important Fitment Note** ✔ Designed as **rear pinion seal** ✔ Can also fit **front differential** ❗ Does **NOT** include raised rubber flange *(front version does)* 👉 See our shop for the **front-specific version**. --- ### 🔧 **Installation Notes** ✔ Removal of prop shaft flange required ✔ Check bearings and preload during fitting ✔ Professional installation recommended --- ### ⚠️ **Important Notes** ❗ Ensure correct fitment before purchase ❗ Compare with existing seal if unsure --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Front pinion seals - Land Cruiser & Hilux parts - Bearings & rebuild kits - 4×4 accessories --- ### 🔥 **Order Today** **Fix the leak. Protect your diff. Keep it running right.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-rear/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-rear/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-rear/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-rear/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Diff%20Pinion%20oil%20seal%20Hilux%20%26%20Landcruiser%2080%20series%20Rear&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdiff-pinion-oil-seal-hilux-landcruiser-80-series-rear%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-rear/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-rear/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-rear/?share=telegram) - **Product categories:** Land Cruiser --- ### [Diff Pinion oil seal Hilux & Landcruiser 80 series suits both Front and Rear](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-suits-both-front-and-rear/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Differential Pinion Oil Seal – Toyota Land Cruiser 80 Series / Toyota Hilux – Front & Rear – Japanese Quality** **Leak Fix • OE Quality • Long Lasting** This **high-quality Japanese-made differential pinion oil seal** is designed for **Toyota Land Cruiser 80 Series and Hilux models**, suitable for **both front and rear differentials**. 👉 A reliable solution to **stop oil leaks and restore proper sealing**. --- ### 🔥 **Why Choose This Oil Seal** ✔ **Premium Japanese Manufacture** ✔ **OE Specification or Better** ✔ **Suitable for Front & Rear Differentials** ✔ **Durable & Long Lasting** --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 80 Series (HDJ80 / FZJ80) - Toyota Hilux 👉 Fits both **front and rear pinion positions** *(see notes below)* --- ### 🔧 **What This Part Does** ✔ Seals the **pinion shaft area** ✔ Prevents **diff oil leaks** ✔ Protects bearings from contamination 👉 Located between the **outer pinion bearing and prop shaft flange**. --- ### ⚙️ **Specifications** - Type: **Differential Pinion Oil Seal** - Position: **Front or Rear Differential** - Quality: **Japanese Manufactured – OE Standard** --- ### 💡 **Common Fault Symptoms** ✔ Oil leaking from differential flange ✔ Oil around prop shaft area ✔ Low diff oil levels 👉 Replace to prevent **costly diff damage**. --- ### 🔍 **Important Fitment Note** ✔ These are commonly listed as **front seals** ✔ Can also be used on the **rear differential** ✔ Rear-specific versions may differ slightly *(e.g. no raised rubber flange)* --- ### 🔧 **Installation Notes** ✔ Requires removal of prop shaft flange ✔ Check bearing condition during replacement ✔ Professional fitting recommended if unsure --- ### ⚠️ **Important Notes** ❗ Ensure correct fitment for your model ❗ Compare with existing seal if unsure --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Land Cruiser & Hilux parts - Bearings & seals - Service items - 4×4 accessories --- ### 🔥 **Order Today** **Stop the leak. Protect your diff. Do it properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-suits-both-front-and-rear/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-suits-both-front-and-rear/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-suits-both-front-and-rear/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-suits-both-front-and-rear/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Diff%20Pinion%20oil%20seal%20Hilux%20%26%20Landcruiser%2080%20series%20suits%20both%20Front%20and%20Rear&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdiff-pinion-oil-seal-hilux-landcruiser-80-series-suits-both-front-and-rear%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-suits-both-front-and-rear/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-suits-both-front-and-rear/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/diff-pinion-oil-seal-hilux-landcruiser-80-series-suits-both-front-and-rear/?share=telegram) - **Product categories:** Land Cruiser --- ### [Ceramic Front Brake Pads Toyota Landcruiser 4.2 VX HDJ80 1HD-T 90/98](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🛑 **Front Ceramic Brake Pads for Toyota Land Cruiser 80 Series 4.2 TD HDJ80 (1990–1998)** **High Performance • Low Dust • OE Quality** Upgrade your braking with this **set of front ceramic brake pads**, designed specifically for the **4.2 TD HDJ80 Land Cruiser**. 👉 Built to **meet or exceed OEM standards** for safety and reliability. --- ### 🔥 **Why Choose These Brake Pads** ✔ **Ceramic Compound – Low Dust & Clean Wheels** ✔ **Smooth, Quiet Braking Performance** ✔ **Excellent Heat Resistance** ✔ **Long Service Life** ✔ **OE Quality or Better** --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 80 Series - Engine: **4.2 TD (1HD-T)** - Years: **1990 – 1998** - Model: **HDJ80 VX** 👉 Please check fitment before purchase. --- ### 🛑 **Performance Benefits** ✔ Reduced brake dust vs standard pads ✔ Consistent braking under load ✔ Less noise and vibration ✔ Improved stopping confidence --- ### ⚙️ **Specifications** - Position: **Front Axle** - Type: **Ceramic Brake Pads** - Quality: **Aftermarket – OE Standard or Better** --- ### 💡 **Why Ceramic Pads** ✔ Cleaner wheels ✔ Longer lifespan ✔ Better heat handling ✔ Quieter operation 👉 Ideal for **daily driving and heavy vehicles like the Land Cruiser**. --- ### 🔧 **Installation Notes** ✔ Direct replacement for original pads ✔ Professional installation recommended ✔ Always check discs condition before fitting --- ### ⚠️ **Important Notes** ❗ Ensure compatibility with your vehicle ❗ Bedding-in recommended after installation --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Brake discs & rear pads - Land Cruiser parts - 4×4 accessories - Service items --- ### 🔥 **Order Today** **Stop better. Drive safer. Upgrade properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Ceramic%20Front%20Brake%20Pads%20Toyota%20Landcruiser%204.2%20VX%20HDJ80%201HD-T%2090%2F98&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fceramic-front-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=telegram) - **Product categories:** Land Cruiser --- ### [so239 female chassis panel mount socket Pack Of 4](https://cbradio.co.uk/product/pl259-so239-female-chassis-panel-mount-socket-pack-of-4-sockets/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **4x SO239 Chassis Panel Mount Sockets – UHF Female Bulkhead Connectors – 4 Hole Fixing** **Strong Mount • Reliable Connection • Essential RF Hardware** This **pack of 4 SO239 chassis mount sockets** is ideal for **panel mounting UHF connections**, providing a **secure and professional RF interface** for your setup. 👉 Perfect for **CB, amateur radio, and custom installations**. --- ### 🔥 **Why Choose These SO239 Sockets** ✔ **Pack of 4 – Great Value** ✔ **Panel / Chassis Mount Design** ✔ **4 Hole Square Fixing Pattern** ✔ **Reliable UHF Connection** ✔ **Durable Metal Construction** --- ### ✅ **Key Features** ✔ **SO239 (UHF Female) Connectors** ✔ **Fits Standard PL259 Plugs** ✔ **Square 4-Screw Mounting Plate** ✔ **Ideal for Enclosures & Panels** ✔ **Strong & Long Lasting Build** --- ### 📡 **Perfect For** - CB radio installations - Amateur (Ham) radio setups - RF enclosures & panels - Test equipment builds - Custom cable and box projects --- ### ⚙️ **Specifications** - Type: **SO239 Chassis / Panel Mount Socket** - Quantity: **Pack of 4** - Connector: **UHF Female (SO239)** - Mounting: **4 Hole Square Pattern** --- ### 💡 **Why Use Panel Mount Connectors** ✔ Clean, professional installation ✔ Secure mounting to enclosures ✔ Easy connection/disconnection 👉 Ideal for **tidy and reliable setups**. --- ### 🔧 **Installation** ✔ Mount to panel using 4 screws ✔ Connect internal coax ✔ Ready for PL259 connection 👉 Simple and effective. --- ### ⚠️ **Important Notes** ❗ Designed for **PL259 connectors only** ❗ Fixing screws not included --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PL259 connectors - Coax cable - RF adaptors - Antennas & mounts --- ### 🔥 **Order Today** **Mount it right. Connect it properly. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-so239-female-chassis-panel-mount-socket-pack-of-4-sockets/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-so239-female-chassis-panel-mount-socket-pack-of-4-sockets/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-so239-female-chassis-panel-mount-socket-pack-of-4-sockets/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-so239-female-chassis-panel-mount-socket-pack-of-4-sockets/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20so239%20female%20chassis%20panel%20mount%20socket%20Pack%20Of%204&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-so239-female-chassis-panel-mount-socket-pack-of-4-sockets%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-so239-female-chassis-panel-mount-socket-pack-of-4-sockets/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-so239-female-chassis-panel-mount-socket-pack-of-4-sockets/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-so239-female-chassis-panel-mount-socket-pack-of-4-sockets/?share=telegram) - **Product categories:** RF Adaptors --- ### [Mini Springer CB Radio Antenna and 4 Bolt Bar 2 way Mirror mount Aerial Kit](https://cbradio.co.uk/product/mini-springer-cb-radio-antenna-and-4-bolt-bar-2-way-mirror-mount-aerial-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚛📡 **CB Aerial Kit – 4 Bolt Bar Mount + Mini Springer/Stinger Antenna + 3m Cable – 3/8 Heavy Duty** **Complete Kit • Rugged • Built for Work** This **heavy duty CB aerial kit** includes a **4-bolt bar mount, 3/8 snail mount, Mini Springer/Stinger antenna, and 3m RG58 cable with PL259**, giving you a **complete, ready-to-install setup**. 👉 Designed for **truckers, farmers, and off-road users** who need reliability. --- ### 🔥 **Why Choose This Kit** ✔ **Complete Plug & Play Setup** ✔ **Heavy Duty 4-Bolt Bar Mount** ✔ **Mini Springer/Stinger Antenna Included** ✔ **Flexible & Virtually Indestructible Design** ✔ **Ideal for Harsh Conditions** --- ### 📦 **What’s Included** ✔ **4 Bolt Bar Mount (Fits 8–25mm Bars)** ✔ **3/8 Snail Mount** ✔ **Mini Springer/Stinger CB Aerial (0.9m)** ✔ **Approx. 3 Metres RG58 Coax Cable** ✔ **PL259 Connector (Fitted)** 👉 Everything needed for a **solid, professional install**. --- ### 🎨 **Colour Options** Available in: ✔ Black *(standard)* ✔ Chrome ✔ Red / White / Blue / Yellow / Green / Orange *(UK customers – message after purchase)* --- ### 🚛 **Perfect For** - Trucks & HGVs - 4×4 & off-road vehicles - Agricultural machinery - Vans & pickups - Roof racks, mirror arms & bull bars --- ### 📡 **Performance Highlights** - Frequency: **26–28 MHz (CB Band)** - **Low VSWR ≤ 1.5:1** - **High power handling up to 1000W** 👉 Strong, reliable signal in all environments. --- ### ⚙️ **Specifications** - Type: **Base Loaded Mobile Antenna** - Length: **0.90 Metres** - Coil Length: **130 mm** - Coil Diameter: **45 mm** - Power Handling: **Up to 1000 Watts** - Impedance: **50 Ohms** - Fitting: **3/8 UNF Thread** - Whip: **17/7 PH Stainless Steel** --- ### 💡 **Why Mini Springer/Stinger** ✔ Compact size for everyday use ✔ Flexible whip absorbs impacts ✔ Ideal for low clearance areas ✔ Proven design since the 90s 👉 A **true workhorse antenna**. --- ### 🔧 **Installation** ✔ Clamps to bars from **8mm to 25mm** ✔ No drilling required ✔ Quick and secure mounting 👉 Built for **real-world use**. --- ### ⚠️ **Important Notes** ❗ Ensure correct grounding for best performance ❗ Message for colour choice (UK customers) ❗ EU/International orders: **Black or Chrome only** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - SWR meters & tuning tools - Power leads & accessories - Additional mounts & brackets --- ### 🔥 **Order Today** **Tough. Compact. Ready for the job.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-cb-radio-antenna-and-4-bolt-bar-2-way-mirror-mount-aerial-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-cb-radio-antenna-and-4-bolt-bar-2-way-mirror-mount-aerial-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-cb-radio-antenna-and-4-bolt-bar-2-way-mirror-mount-aerial-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-cb-radio-antenna-and-4-bolt-bar-2-way-mirror-mount-aerial-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20Springer%20CB%20Radio%20Antenna%20and%204%20Bolt%20Bar%202%20way%20Mirror%20mount%20Aerial%20Kit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-cb-radio-antenna-and-4-bolt-bar-2-way-mirror-mount-aerial-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-cb-radio-antenna-and-4-bolt-bar-2-way-mirror-mount-aerial-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-cb-radio-antenna-and-4-bolt-bar-2-way-mirror-mount-aerial-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-cb-radio-antenna-and-4-bolt-bar-2-way-mirror-mount-aerial-kit/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [Trucker Base Loaded CB Radio Aerial Dominator Coil Antenna 3/8th THREAD 26-29MHz](https://cbradio.co.uk/product/trucker-base-loaded-cb-radio-aerial-dominator-coil-antenna-3-8th-thread-26-29mhz/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚛 **Dominator Ultimate Trucker CB Antenna – 1.5m Flat Coil – 3/8 Heavy Duty 26–29MHz** **High Power • Iconic Design • Serious Performance** The **Dominator Ultimate Trucker CB Antenna** is a **premium flat coil aerial**, inspired by the legendary Browning design and built for **maximum performance and standout looks**. 👉 A top choice for **truckers, off-roaders, and high-power users**. --- ### 🔥 **Why Choose the Dominator** ✔ **Iconic Flat Coil Design** ✔ **High Power Handling – Up to 1000W** ✔ **Excellent Signal Performance** ✔ **Upgrade from Standard Springer/Stinger Antennas** ✔ **Suitable for Mobile or Base Use** --- ### 📡 **Performance Highlights** - Frequency Range: **26 – 29 MHz (CB & 10m)** - **Low VSWR ≤ 1.5:1** - Handles **high power setups including amplifiers** 👉 Built for **strong transmit and receive performance**. --- ### 🚛 **Perfect For** - Trucks & HGVs - 4×4 & off-road vehicles - High power CB setups - Base station installations - Enthusiasts wanting top performance --- ### ⚙️ **Specifications** - Type: **Base Loaded Flat Coil Antenna** - Frequency: **26 – 29 MHz** - Length: **150 cm (1.5m)** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 1000 Watts** - Fitting: **Standard 3/8 Thread** --- ### 💡 **Why Flat Coil Antennas Stand Out** ✔ Improved efficiency vs traditional designs ✔ Better performance under power ✔ Distinctive, professional appearance 👉 A **serious upgrade option**. --- ### 🔧 **Installation Tips** ✔ Use a **heavy duty 3/8 mount** ✔ Ensure proper grounding ✔ Mount high and clear where possible --- ### ⚠️ **Important Notes** ❗ Requires **3/8 mount & coax cable** ❗ Height clearance should be considered ❗ High power use requires correct setup --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Heavy duty mounts - Coax cable & connectors - SWR meters & tuning tools - CB radios --- ### 🔥 **Order Today** **More power. More presence. More performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/trucker-base-loaded-cb-radio-aerial-dominator-coil-antenna-3-8th-thread-26-29mhz/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/trucker-base-loaded-cb-radio-aerial-dominator-coil-antenna-3-8th-thread-26-29mhz/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/trucker-base-loaded-cb-radio-aerial-dominator-coil-antenna-3-8th-thread-26-29mhz/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/trucker-base-loaded-cb-radio-aerial-dominator-coil-antenna-3-8th-thread-26-29mhz/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Trucker%20Base%20Loaded%20CB%20Radio%20Aerial%20Dominator%20Coil%20Antenna%203%2F8th%20THREAD%2026-29MHz&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftrucker-base-loaded-cb-radio-aerial-dominator-coil-antenna-3-8th-thread-26-29mhz%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/trucker-base-loaded-cb-radio-aerial-dominator-coil-antenna-3-8th-thread-26-29mhz/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/trucker-base-loaded-cb-radio-aerial-dominator-coil-antenna-3-8th-thread-26-29mhz/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/trucker-base-loaded-cb-radio-aerial-dominator-coil-antenna-3-8th-thread-26-29mhz/?share=telegram) - **Product categories:** Long Stingers --- ### [wire dipole centre center T shape and dog bone insulators](https://cbradio.co.uk/product/wire-dipole-centre-center-t-shape-and-dog-bone-insulators/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔧 **Wire Dipole Centre Kit – T Shape Feed Point + 2x Dog Bone Insulators – 300/450Ω** **DIY Antenna • Strong • Essential Components** This **wire dipole centre kit** includes a **T-shaped feed point** and **2 dog bone insulators**, making it perfect for **building your own dipole or G5RV antenna**. 👉 Ideal for **amateur radio projects and custom antenna builds**. --- ### 🔥 **Why Choose This Kit** ✔ **Complete Dipole Centre Setup** ✔ **Compatible with 300Ω & 450Ω Ladder Line** ✔ **Includes 2 Dog Bone Insulators** ✔ **Strong & Lightweight Design** --- ### 📦 **What’s Included** ✔ **T Shape Dipole Centre (Feed Point)** ✔ **2 x Dog Bone End Insulators** 👉 Everything needed to start your **DIY antenna build**. --- ### 📡 **Perfect For** - Dipole wire antennas - G5RV antenna builds - Amateur (Ham) radio projects - Portable setups (SOTA / field use) - Experimental aerial designs --- ### ⚙️ **Specifications** - Type: **Wire Dipole Centre Kit** - Feed Compatibility: **300Ω or 450Ω Ladder Line** - Includes: **2 Dog Bone Insulators** --- ### 💡 **Why Use a Proper Dipole Centre** ✔ Strong mechanical support ✔ Proper feed point connection ✔ Reliable long-term performance 👉 A must-have for **building it right first time**. --- ### 🔧 **Typical Setup** ✔ Attach wire elements to dipole centre ✔ Connect ladder line feeder ✔ Use insulators at each end 👉 Simple, effective antenna solution. --- ### ⚠️ **Important Notes** ❗ Wire and feeder cable not included ❗ Designed for DIY antenna projects --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Ladder line (300Ω / 450Ω) - Coax cable & connectors - Mast poles & guy kits - RF accessories --- ### 🔥 **Order Today** **Build it yourself. Build it properly. Perform better.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/wire-dipole-centre-center-t-shape-and-dog-bone-insulators/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/wire-dipole-centre-center-t-shape-and-dog-bone-insulators/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/wire-dipole-centre-center-t-shape-and-dog-bone-insulators/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/wire-dipole-centre-center-t-shape-and-dog-bone-insulators/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20wire%20dipole%20centre%20center%20T%20shape%20and%20dog%20bone%20insulators&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fwire-dipole-centre-center-t-shape-and-dog-bone-insulators%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/wire-dipole-centre-center-t-shape-and-dog-bone-insulators/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/wire-dipole-centre-center-t-shape-and-dog-bone-insulators/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/wire-dipole-centre-center-t-shape-and-dog-bone-insulators/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [Quick Disconnect Power Cable Bullet Lead](https://cbradio.co.uk/product/quick-disconnect-power-cable-bullet-lead/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📻 **Motorola PMR Power Lead – Quick Release Non-Reversible Cable – Secure DC Connector** **Quick Connect • Safe Polarity • Professional Grade** This **Motorola-compatible PMR power lead** offers a **quick release connection** with **non-reversible polarity protection**, ensuring your radio is powered **safely and correctly every time**. 👉 Ideal for **mobile installations, fleet use, and quick equipment swaps**. --- ### 🔥 **Why Choose This Power Lead** ✔ **Quick Release Connector – Fast Disconnect** ✔ **Non-Reversible Design – Prevents Wrong Polarity** ✔ **Reliable & Secure Power Connection** ✔ **Perfect for Professional Use** --- ### ✅ **Key Features** ✔ **Motorola-Compatible Power Lead** ✔ **Quick Connect / Disconnect Function** ✔ **Polarity-Protected (Non-Reversible)** ✔ **Durable Cable Construction** ✔ **Suitable for Mobile or Base Installations** --- ### 📡 **Perfect For** - Motorola PMR transceivers - Fleet vehicles - Emergency services setups - Workshop and test environments - Temporary or portable installs --- ### ⚙️ **Specifications** - Type: **PMR Power Lead** - Compatibility: **Motorola Transceivers (Check Model Fit)** - Feature: **Quick Release Connector** - Protection: **Non-Reversible Polarity Design** --- ### 💡 **Why This Cable Is Essential** ✔ Prevents accidental reverse polarity damage ✔ Speeds up installation and removal ✔ Improves safety and reliability 👉 A **simple upgrade with real benefits**. --- ### 🔧 **Installation** ✔ Connect to radio ✔ Connect to power supply ✔ Quick disconnect when needed 👉 Designed for **ease of use and safety**. --- ### ⚠️ **Important Notes** ❗ Ensure compatibility with your Motorola model ❗ Check voltage requirements before use --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PMR radios & accessories - Power supplies - Mounting brackets - Coax cable & connectors --- ### 🔥 **Order Today** **Connect fast. Power safely. Work smarter.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/quick-disconnect-power-cable-bullet-lead/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/quick-disconnect-power-cable-bullet-lead/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/quick-disconnect-power-cable-bullet-lead/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/quick-disconnect-power-cable-bullet-lead/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Quick%20Disconnect%20Power%20Cable%20Bullet%20Lead&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fquick-disconnect-power-cable-bullet-lead%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/quick-disconnect-power-cable-bullet-lead/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/quick-disconnect-power-cable-bullet-lead/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/quick-disconnect-power-cable-bullet-lead/?share=telegram) - **Product categories:** CB Radio Power Leads --- ### [PMR Power lead for Tait 500 Transceivers](https://cbradio.co.uk/product/pmr-power-lead-for-tait-500-transceivers/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📻 **PMR Power Lead for Tait 500 Series – 4 Pin Connector to Bullet Sockets – Heavy Duty Cable** **Reliable Power • Heavy Duty • Direct Fit** This **heavy duty DC power lead** is designed for **Tait 500 series PMR transceivers**, providing a **secure and reliable power connection**. 👉 Ideal replacement or spare lead for **professional radio setups**. --- ### 🔥 **Why Choose This Power Lead** ✔ **Designed for Tait 500 Series Radios** ✔ **Heavy Duty 16 Gauge Cable** ✔ **Secure 4-Pin Nylon Connector** ✔ **Bullet Socket Termination for Easy Connection** --- ### ✅ **Key Features** ✔ **4-Pin White Nylon Connector (Radio Side)** ✔ **2 x Bullet Socket Connectors (Power Side)** ✔ **Durable 16 Gauge Wire** ✔ **Strong & Reliable Build Quality** ✔ **Ideal for Mobile or Base Installations** --- ### 📡 **Perfect For** - Tait 500 series PMR radios - Mobile radio installations - Replacement power leads - Workshop & fleet maintenance --- ### ⚙️ **Specifications** - Type: **DC Power Lead** - Compatibility: **Tait 500 Series Transceivers** - Cable: **16 Gauge Heavy Duty** - Connector (Radio): **4-Pin White Nylon** - Connector (Power): **2 x Bullet Sockets** --- ### 💡 **Why Use a Proper Power Lead** ✔ Ensures stable power supply ✔ Reduces voltage drop ✔ Improves radio performance 👉 A must-have for **reliable operation**. --- ### 🔧 **Installation** ✔ Connect 4-pin plug to radio ✔ Connect bullet sockets to power supply ✔ Ensure correct polarity 👉 Quick and simple setup. --- ### ⚠️ **Important Notes** ❗ Check compatibility with your radio model ❗ Ensure correct polarity when connecting ❗ Designed for Tait 500 series only --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PMR radios & accessories - Power supplies - Coax cable & connectors - Mounting brackets --- ### 🔥 **Order Today** **Power it properly. Keep it reliable.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pmr-power-lead-for-tait-500-transceivers/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pmr-power-lead-for-tait-500-transceivers/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pmr-power-lead-for-tait-500-transceivers/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pmr-power-lead-for-tait-500-transceivers/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PMR%20Power%20lead%20for%20Tait%20500%20Transceivers&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpmr-power-lead-for-tait-500-transceivers%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pmr-power-lead-for-tait-500-transceivers/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pmr-power-lead-for-tait-500-transceivers/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pmr-power-lead-for-tait-500-transceivers/?share=telegram) - **Product categories:** CB Radio Power Leads --- ### [Sirio Antenna NEW DELTA 27-95 EW DELTA 27M-95 CB aerial](https://cbradio.co.uk/product/sirio-antenna-new-delta-27-95-ew-delta-27m-95-cb-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **Sirio NEW DELTA 27-95 CB Antenna Kit – 27MHz DV Style – Thru Hole Mount + 4m Cable** **Compact • Italian Quality • Complete Kit** The **Sirio NEW DELTA 27-95** is a **compact, high-quality CB antenna kit**, essentially a **mini DV27 style aerial** supplied with **mount and cable** for a clean, professional install. 👉 Ideal for **cars, vans, and discreet installations**. --- ### 🔥 **Why Choose the Sirio DELTA 27-95** ✔ **Compact Low Profile Design** ✔ **Complete Kit with Mount & Cable** ✔ **Tuneable for Optimal Performance** ✔ **High Quality Materials & Build** ✔ **Trusted Sirio Engineering** --- ### 📦 **What’s Included** ✔ **Sirio DELTA 27-95 Antenna** ✔ **Thru-Hole Mount (N Chrome)** ✔ **4 Metres RG58 Coax Cable** ✔ **Mounting Hardware (Screw Bolt)** 👉 Ready for a **professional installation**. --- ### 📡 **Performance Highlights** - Frequency Range: **26.7 – 27.3 MHz (tuneable)** - Bandwidth: **≥ 900 kHz @ SWR ≤ 2** - Radiation: **Omnidirectional** - Polarisation: **Linear Vertical** 👉 Reliable **all-round CB performance**. --- ### ⚙️ **Electrical Specifications** - Type: **Helical Loaded Antenna** - Max Power: - **35W Continuous (CW)** - **100W Short Duration (CW)** - System: **CB 27 MHz** --- ### 🔧 **Mechanical Specifications** - Height: **Approx. 950 mm (0.95m)** - Weight: **Approx. 390g – 500g (depending on version)** - Materials: **Copper / Brass / Stainless Steel / Fibreglass** - Mounting: **Thru-Hole (Permanent Install)** --- ### 🚗 **Perfect For** - Cars & vans - Discreet installations - Daily drivers - Professional installs - Users wanting a low-profile aerial --- ### 💡 **Why Choose a DV Style Antenna** ✔ Clean OEM-style look ✔ Lower height than springers ✔ Less wind resistance ✔ Ideal for everyday driving --- ### ⚠️ **Important Notes** ❗ **PL259 connector NOT included** *(as per Sirio standard)* ❗ Requires fitting of connector to cable ❗ Thru-hole mounting requires drilling --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PL259 connectors - SWR meters & tuning tools - CB radios - Mounting accessories --- ### 🔥 **Order Today** **Compact. Clean. Reliable. Proper CB performance.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-antenna-new-delta-27-95-ew-delta-27m-95-cb-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-antenna-new-delta-27-95-ew-delta-27m-95-cb-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-antenna-new-delta-27-95-ew-delta-27m-95-cb-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-antenna-new-delta-27-95-ew-delta-27m-95-cb-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20Antenna%20NEW%20DELTA%2027-95%20EW%20DELTA%2027M-95%20CB%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-antenna-new-delta-27-95-ew-delta-27m-95-cb-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-antenna-new-delta-27-95-ew-delta-27m-95-cb-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-antenna-new-delta-27-95-ew-delta-27m-95-cb-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-antenna-new-delta-27-95-ew-delta-27m-95-cb-aerial/?share=telegram) - **Product categories:** Sirio cb Antennas --- ### [4 x F to F-connector back to back F barrel adaptor SKY VIRGIN](https://cbradio.co.uk/product/4-x-f-to-f-connector-back-to-back-f-barrel-adaptor-sky-virgin/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📺🔌 **4x F-Type Female to Female Barrel Connectors – F Coupler – Sky / Virgin Coax Joiners** **Simple • Reliable • Essential Connector** This **pack of 4 F-type female to female barrel connectors** is perfect for **joining or extending coax cables** used with **Sky, Sky+ and Virgin Media systems**. 👉 A quick and easy solution when **relocating or extending your setup**. --- ### 🔥 **Why Choose These F Connectors** ✔ **Join 2 x F-Type Coax Cables** ✔ **Ideal for Sky & Virgin Installations** ✔ **Strong, Reliable Signal Connection** ✔ **Compact & Easy to Use** --- ### ✅ **Key Features** ✔ **F-Type Female to Female (Back-to-Back)** ✔ **Pack of 4 Connectors** ✔ **High Quality Construction** ✔ **Suitable for Satellite & Cable TV** ✔ **No Tools Required** --- ### 📡 **Perfect For** - Extending satellite cables - Moving Sky / Sky+ / Virgin boxes - Repairing coax cable runs - TV and satellite installations --- ### ⚙️ **Specifications** - Type: **F-Type Barrel Connector (Female to Female)** - Quantity: **4 Pack** - Use: **Satellite / Cable TV / Coax Connections** --- ### 💡 **Why You Need These** ✔ Saves replacing full cable runs ✔ Quick fix for short cables ✔ Ideal for temporary or permanent setups 👉 A must-have for **any TV or satellite setup**. --- ### 🔧 **How to Use** ✔ Screw both F connectors into each side ✔ Tighten securely ✔ Ready to go 👉 Fast and hassle-free. --- ### ⚠️ **Important Notes** ❗ Designed for **F-type connectors only** ❗ Ensure tight connections for best signal quality --- ### 📦 **Fast Dispatch** ✔ Usually dispatched same day ✔ Secure packaging 📮 *Please note: Delivery times depend on Royal Mail service* --- ### 💬 **More Available** 👉 Check our shop for: - Coax cables - F connectors - TV aerial leads - Satellite accessories --- ### 🔥 **Order Today** **Extend it. Connect it. Keep it simple.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-x-f-to-f-connector-back-to-back-f-barrel-adaptor-sky-virgin/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-x-f-to-f-connector-back-to-back-f-barrel-adaptor-sky-virgin/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-x-f-to-f-connector-back-to-back-f-barrel-adaptor-sky-virgin/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-x-f-to-f-connector-back-to-back-f-barrel-adaptor-sky-virgin/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20x%20F%20to%20F-connector%20back%20to%20back%20F%20barrel%20adaptor%20SKY%20VIRGIN&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-x-f-to-f-connector-back-to-back-f-barrel-adaptor-sky-virgin%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-x-f-to-f-connector-back-to-back-f-barrel-adaptor-sky-virgin/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-x-f-to-f-connector-back-to-back-f-barrel-adaptor-sky-virgin/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-x-f-to-f-connector-back-to-back-f-barrel-adaptor-sky-virgin/?share=telegram) - **Product categories:** RF Adaptors --- ### [5 x T&K Home-base Aerial Satellite Dish or LCD Wall Fixing Bolt & Raw Plug](https://cbradio.co.uk/product/5-x-tk-home-base-aerial-satellite-dish-or-lcd-wall-fixing-bolt-raw-plug/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **5x T&K Bracket Fixing Bolts & Raw Plugs – Heavy Duty Wall Fixings – Aerial / Satellite / TV Mount** **Strong Fixing • Trade Quality • Fast Installation** This **pack of 5 heavy duty fixing bolts with raw plugs** is ideal for securely mounting **T&K brackets, satellite dishes, aerials, and TV wall brackets**. 👉 The same fixings used by **professional aerial engineers**. --- ### 🔥 **Why Choose These Fixings** ✔ **Heavy Duty Mungo-Style Fixings** ✔ **Strong Hold in Masonry** ✔ **Faster & Easier Than Rawl Bolts** ✔ **Professional Grade Quality** --- ### ✅ **Key Features** ✔ **Pack of 5 Fixings** ✔ **Includes Bolts & Raw Plugs** ✔ **Designed for Solid Wall Installation** ✔ **Reliable & Long Lasting Hold** ✔ **Trade Approved Quality** --- ### 📡 **Perfect For** - T&K aerial brackets - Satellite dish mounting - TV wall brackets (LCD / Plasma) - CCTV installations - General heavy wall fixing applications --- ### ⚙️ **Specifications** - Type: **Wall Fixing Bolts & Raw Plugs** - Quantity: **5 Pack** - Drill Size Required: **10mm Masonry Bit** - Use: **Brick / Concrete / Solid Walls** --- ### 💡 **Why Use These Over Standard Fixings** ✔ Faster to install ✔ Stronger hold ✔ Less hassle than traditional rawl bolts 👉 Ideal for **secure and reliable installations**. --- ### 🔧 **Installation** ✔ Drill **10mm hole** ✔ Insert raw plug ✔ Tighten bolt for secure fixing 👉 Simple and effective. --- ### ⚠️ **Important Notes** ❗ Suitable for **solid walls only** ❗ Not recommended for plasterboard or hollow walls --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - T&K brackets - Mast poles & clamps - Satellite & aerial mounts - Coax cable & connectors --- ### 🔥 **Order Today** **Fix it once. Fix it properly. Built to hold.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/5-x-tk-home-base-aerial-satellite-dish-or-lcd-wall-fixing-bolt-raw-plug/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/5-x-tk-home-base-aerial-satellite-dish-or-lcd-wall-fixing-bolt-raw-plug/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/5-x-tk-home-base-aerial-satellite-dish-or-lcd-wall-fixing-bolt-raw-plug/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/5-x-tk-home-base-aerial-satellite-dish-or-lcd-wall-fixing-bolt-raw-plug/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%205%20x%20T%26K%20Home-base%20Aerial%20Satellite%20Dish%20or%20LCD%20Wall%20Fixing%20Bolt%20%26%20Raw%20Plug&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F5-x-tk-home-base-aerial-satellite-dish-or-lcd-wall-fixing-bolt-raw-plug%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/5-x-tk-home-base-aerial-satellite-dish-or-lcd-wall-fixing-bolt-raw-plug/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/5-x-tk-home-base-aerial-satellite-dish-or-lcd-wall-fixing-bolt-raw-plug/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/5-x-tk-home-base-aerial-satellite-dish-or-lcd-wall-fixing-bolt-raw-plug/?share=telegram) - **Product categories:** Installation aid --- ### [Viscous Fan Toyota Landcruiser 4.7 V8 Auto Engine 2UZ-FE](https://cbradio.co.uk/product/viscous-fan-toyota-land-cruiser-4-7-v8-auto-engine-2uz-fe/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙❄️ **Toyota Land Cruiser 100 Viscous Fan Clutch Assembly – 4.7 V8 Amazon – Genuine Used** **Genuine Toyota • Tested Working • Direct Replacement** This **viscous fan assembly (fan clutch unit)** has been removed from a **Toyota Land Cruiser 100 Series 4.7 V8 (Amazon)** currently being dismantled. 👉 Supplied as a **genuine used part in good working order**. --- ### 🔥 **Why Choose This Part** ✔ **Genuine Toyota Component** ✔ **Removed from Running Vehicle** ✔ **Cost-Effective Alternative to New** ✔ **Direct Fit Replacement** --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 100 Series - Engine: **4.7 V8 Petrol (Amazon)** 👉 May fit other models – please check compatibility before purchase --- ### 🔧 **What This Part Does** ✔ Controls cooling fan speed based on temperature ✔ Improves engine cooling efficiency ✔ Reduces unnecessary fan drag 👉 Essential for **proper engine cooling performance**. --- ### ⚙️ **Specifications** - Part: **Viscous Fan Clutch Assembly** - Engine: **4.7 V8 Petrol** - Condition: **Used – Tested Working** --- ### 💡 **Common Fault Symptoms** ✔ Overheating at low speeds ✔ Fan not engaging properly ✔ Excessive fan noise or free-spinning 👉 Replace to restore **proper cooling function**. --- ### ⚠️ **Important Notes** ❗ Used part – may show signs of wear ❗ Ensure compatibility with your vehicle ❗ Professional fitting recommended if unsure --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Land Cruiser 100 parts - Engine & cooling components - Suspension & drivetrain parts - 4×4 accessories --- ### 🔥 **Order Today** **Genuine part. Proper cooling. Keep it running right.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/viscous-fan-toyota-land-cruiser-4-7-v8-auto-engine-2uz-fe/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/viscous-fan-toyota-land-cruiser-4-7-v8-auto-engine-2uz-fe/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/viscous-fan-toyota-land-cruiser-4-7-v8-auto-engine-2uz-fe/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/viscous-fan-toyota-land-cruiser-4-7-v8-auto-engine-2uz-fe/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Viscous%20Fan%20Toyota%20Landcruiser%204.7%20V8%20Auto%20Engine%202UZ-FE&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fviscous-fan-toyota-land-cruiser-4-7-v8-auto-engine-2uz-fe%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/viscous-fan-toyota-land-cruiser-4-7-v8-auto-engine-2uz-fe/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/viscous-fan-toyota-land-cruiser-4-7-v8-auto-engine-2uz-fe/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/viscous-fan-toyota-land-cruiser-4-7-v8-auto-engine-2uz-fe/?share=telegram) - **Product categories:** Land Cruiser --- ### [large springer aerial cb radio antenna with 3/8 power stick dv body mount kit](https://cbradio.co.uk/product/large-springer-aerial-cb-radio-antenna-with-3-8-power-stick-dv-body-mount-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚛 **XL Springer CB Antenna Kit – 1.55m + DV Mount + 4m Cable – PL259 – Heavy Duty 3/8 Aerial** **Complete Kit • Heavy Duty • Built for the Road** This **XL Springer CB aerial kit** includes everything you need for a **professional installation** – a **heavy duty springer antenna, DV mount, and 4m coax cable with PL259**. 👉 A **proven setup** trusted by **truckers, farmers, and off-road users**. --- ### 🔥 **Why Choose This XL Springer Kit** ✔ **Complete Plug & Play Kit** ✔ **Heavy Duty Open Coil Design** ✔ **Flexible Stainless Steel Whip** ✔ **Pre-Tuned – No Adjustment Needed** ✔ **Quality British Made Antenna** --- ### 📦 **What’s Included** ✔ **XL Springer CB Aerial (1.55m)** ✔ **DV Mount (Angle Adjustable)** ✔ **4 Metres RG58 Coax Cable** ✔ **PL259 Connector Fitted** 👉 Everything required for a **quick and clean install**. --- ### 📡 **Performance Highlights** - Full **27–28 MHz CB coverage (80 channels)** - **Low VSWR ≤ 1.5:1** - **High power handling up to 1000W** 👉 Strong, reliable signal in all conditions. --- ### 🚛 **Perfect For** - Trucks & HGVs - 4×4 & off-road vehicles - Agricultural machinery - Vans & pickups - Caravans & motorhomes --- ### ⚙️ **Specifications** - Type: **1/4 Wave Base Loaded Springer Antenna** - Frequency: **27–28 MHz** - Length: **1.55 Metres** - Coil Length: **150 mm** - Coil Diameter: **50 mm** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 1000 Watts** - Impedance: **50 Ohms** - Fitting: **3/8 UNF Thread** - Whip: **17/7 PH Stainless Steel** --- ### 💡 **Why Springers Are So Popular** ✔ Flexible whip absorbs impacts ✔ Handles rough terrain & low branches ✔ Virtually indestructible design ✔ Trusted by professionals 👉 A true **workhorse antenna**. --- ### 🔧 **Installation Benefits** ✔ DV mount allows **angle adjustment** ✔ Cable pre-fitted with PL259 ✔ Easy installation on most vehicles 👉 Designed for **real-world use**. --- ### ⚠️ **Important Notes** ❗ Ensure good grounding for best performance ❗ Mount on suitable surface for optimal signal --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - SWR meters & tuning tools - Additional mounts & brackets - Power accessories --- ### 🔥 **Order Today** **Strong. Flexible. Complete. Ready for the job.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-springer-aerial-cb-radio-antenna-with-3-8-power-stick-dv-body-mount-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-springer-aerial-cb-radio-antenna-with-3-8-power-stick-dv-body-mount-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-springer-aerial-cb-radio-antenna-with-3-8-power-stick-dv-body-mount-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-springer-aerial-cb-radio-antenna-with-3-8-power-stick-dv-body-mount-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20large%20springer%20aerial%20cb%20radio%20antenna%20with%203%2F8%20power%20stick%20dv%20body%20mount%20kit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-springer-aerial-cb-radio-antenna-with-3-8-power-stick-dv-body-mount-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-springer-aerial-cb-radio-antenna-with-3-8-power-stick-dv-body-mount-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-springer-aerial-cb-radio-antenna-with-3-8-power-stick-dv-body-mount-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-springer-aerial-cb-radio-antenna-with-3-8-power-stick-dv-body-mount-kit/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [Mini Bullwhip Modulator Style CB Radio antenna Bull Whip aerial](https://cbradio.co.uk/product/mini-bullwhip-modulator-style-cb-radio-antenna-bull-whip-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **Mini Bullwhip CB Antenna – 0.95m Modulator Style – 3/8 Mobile Aerial 27MHz** **Compact • Powerful • Built for Everyday Use** The **Mini Bullwhip Modulator Style CB Antenna** is the perfect solution when you need a **shorter aerial without sacrificing performance**. 👉 Smaller than a full-size bullwhip, but still delivers **excellent range and reliability**. --- ### 🔥 **Why Choose the Mini Bullwhip** ✔ **Compact Size – Ideal for Low Clearance** ✔ **Strong Signal Performance** ✔ **Durable Stainless Steel Whip** ✔ **Pre-Tuned – Ready to Install** ✔ **Perfect Balance of Size & Performance** --- ### 📡 **Performance Highlights** - Covers **26–28 MHz CB band (AM/FM)** - **Low VSWR ≤ 1.5:1** - **Power handling up to 500W** 👉 Reliable performance in a **compact form factor**. --- ### 🚗 **Perfect For** - Cars & vans - 4×4 & off-road vehicles - Trucks & pickups - Caravans & motorhomes - Low height or restricted clearance setups --- ### ⚙️ **Specifications** - Type: **1/4 Wave Base Loaded Mobile Antenna** - Frequency: **26–28 MHz** - Length: **0.95 Metres** - Coil Length: **220 mm** - Coil Diameter: **22 mm** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 500 Watts** - Impedance: **50 Ohms** - Fitting: **Standard 3/8 UNF Thread** - Whip: **17/7 PH Stainless Steel** --- ### 💡 **Why Choose a Shorter Antenna** Full-size antennas: - Can be too tall - Hit branches or obstacles 👉 This Mini Bullwhip: ✔ Lower profile ✔ Easier everyday use ✔ Still delivers solid performance --- ### 🔧 **Installation Tips** ✔ Use a **3/8 mount** ✔ Ensure proper grounding ✔ Position for best clearance --- ### ⚠️ **Important Notes** ❗ Requires **3/8 mount & coax cable** ❗ Performance depends on mounting position and grounding --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - 3/8 mounts & brackets - Coax cable & connectors - SWR meters & tuning tools - CB radios --- ### 🔥 **Order Today** **Compact size. Strong signal. Built for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-bullwhip-modulator-style-cb-radio-antenna-bull-whip-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-bullwhip-modulator-style-cb-radio-antenna-bull-whip-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-bullwhip-modulator-style-cb-radio-antenna-bull-whip-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-bullwhip-modulator-style-cb-radio-antenna-bull-whip-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20Bullwhip%20Modulator%20Style%20CB%20Radio%20antenna%20Bull%20Whip%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-bullwhip-modulator-style-cb-radio-antenna-bull-whip-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-bullwhip-modulator-style-cb-radio-antenna-bull-whip-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-bullwhip-modulator-style-cb-radio-antenna-bull-whip-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-bullwhip-modulator-style-cb-radio-antenna-bull-whip-aerial/?share=telegram) - **Product categories:** Modulators --- ### [High quality N-type male compression clamp connector RG213 LMR400 etc.](https://cbradio.co.uk/product/high-quality-n-type-male-compression-clamp-connector-rg213-lmr400-etc/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **N-Type Male Connector – Compression Clamp – RG213 / LMR400 Coax Plug – Gold Pin** **Low Loss • Professional Grade • Secure Fit** This **high-quality N-type male compression connector** is designed for **RG213, LMR400 and similar coax cables**, delivering **excellent RF performance with a secure mechanical connection**. 👉 Ideal for **CB, amateur radio, WiFi, and RF applications**. --- ### 🔥 **Why Choose This N-Type Connector** ✔ **Low Loss RF Performance** ✔ **Compression Clamp Design – Secure Fit** ✔ **Gold Plated Centre Pin** ✔ **Heavy Duty Brass Construction** ✔ **Professional Quality Build** --- ### ✅ **Key Features** ✔ **N-Type Male Plug** ✔ **Suitable for RG213 / LMR400 Coax** ✔ **Compression Clamp / Crimp Style Fit** ✔ **Excellent Shielding & Signal Integrity** ✔ **Durable Metal Construction** --- ### 📡 **Perfect For** - Amateur (Ham) radio - CB radio installations - WiFi & RF systems - Base station setups - Outdoor antenna connections --- ### ⚙️ **Specifications** - Type: **N-Type Male Connector** - Cable Compatibility: **RG213 / LMR400 / Similar** - Connection: **Compression Clamp** **Materials:** - Connector Body: **Nickel Plated Brass** - Centre Pin: **Gold Plated Brass** - Ferrule: **Nickel Plated Brass** --- ### 💡 **Why Use N-Type Connectors** ✔ Lower signal loss than UHF connectors ✔ Better performance at higher frequencies ✔ More secure weather-resistant connection 👉 Ideal for **serious RF setups**. --- ### 🔧 **Installation** ✔ Strip coax cable to size ✔ Insert into connector ✔ Clamp/compress ferrule ✔ Secure centre pin 👉 Provides a **strong, reliable connection**. --- ### 📦 **What’s Included** ✔ **1 x N-Type Male Connector** --- ### ⚠️ **Important Notes** ❗ Ensure correct cable type before purchase ❗ Proper tools recommended for installation --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable (RG213 / LMR400) - N-type adaptors - Antennas & mounts - SWR meters & tools --- ### 🔥 **Order Today** **Low loss. Strong connection. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/high-quality-n-type-male-compression-clamp-connector-rg213-lmr400-etc/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/high-quality-n-type-male-compression-clamp-connector-rg213-lmr400-etc/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/high-quality-n-type-male-compression-clamp-connector-rg213-lmr400-etc/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/high-quality-n-type-male-compression-clamp-connector-rg213-lmr400-etc/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20High%20quality%20N-type%20male%20compression%20clamp%20connector%20RG213%20LMR400%20etc.&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhigh-quality-n-type-male-compression-clamp-connector-rg213-lmr400-etc%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/high-quality-n-type-male-compression-clamp-connector-rg213-lmr400-etc/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/high-quality-n-type-male-compression-clamp-connector-rg213-lmr400-etc/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/high-quality-n-type-male-compression-clamp-connector-rg213-lmr400-etc/?share=telegram) - **Product categories:** RF Adaptors --- ### [10 Amp Audio CB Radio Noise Filter eliminator Suppressor car Stereo](https://cbradio.co.uk/product/10-amp-audio-cb-radio-noise-filter-eliminator-suppressor-car-stereo/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔇📡 **10A CB Radio Noise Filter – Alternator Noise Suppressor – Car Stereo Interference Eliminator** **Clear Audio • Easy Install • Essential Upgrade** This **10 Amp noise filter** is designed to **eliminate unwanted electrical interference**, such as **alternator whine and engine noise**, from your **CB radio or car stereo system**. 👉 A simple solution for **clean, interference-free audio**. --- ### 🔥 **Why You Need This Noise Filter** ✔ Removes **alternator whine** ✔ Reduces **engine electrical interference** ✔ Improves **audio clarity** ✔ Protects sensitive equipment --- ### ✅ **Key Features** ✔ **10 Amp Capacity** ✔ **Inline Installation** ✔ **Compact & Lightweight Design** ✔ **Suitable for 12V Systems** ✔ **Works with CB Radios & Car Audio** --- ### 🚗 **Perfect For** - CB radio installations - Car stereo systems - 4×4 & off-road vehicles - Trucks & vans - Any vehicle with electrical interference issues --- ### 📡 **Common Problems It Fixes** ✔ High-pitched whining noise (alternator whine) ✔ Buzzing through speakers ✔ Interference during acceleration ✔ Background electrical noise 👉 Restores **clear sound quality**. --- ### ⚙️ **Specifications** - Type: **Noise Filter / Suppressor** - Current Rating: **10 Amps** - Installation: **Inline (Power Cable)** - Dimensions: **75 x 36 x 36 mm** - Weight: **Approx. 0.11 kg (net)** --- ### 🔧 **Installation** ✔ Fit inline with power supply ✔ Place between battery and device ✔ Quick and simple setup 👉 No specialist tools required. --- ### 💡 **Why It Works** ✔ Filters out electrical noise from vehicle systems ✔ Stabilises power supply to equipment ✔ Improves overall system performance --- ### ⚠️ **Important Notes** ❗ Designed for **12V automotive systems** ❗ Ensure correct wiring polarity --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios & accessories - Power cables & connectors - Antennas & mounts - Installation tools --- ### 🔥 **Order Today** **No noise. No interference. Just clear audio.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/10-amp-audio-cb-radio-noise-filter-eliminator-suppressor-car-stereo/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/10-amp-audio-cb-radio-noise-filter-eliminator-suppressor-car-stereo/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/10-amp-audio-cb-radio-noise-filter-eliminator-suppressor-car-stereo/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/10-amp-audio-cb-radio-noise-filter-eliminator-suppressor-car-stereo/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2010%20Amp%20Audio%20CB%20Radio%20Noise%20Filter%20eliminator%20Suppressor%20car%20Stereo&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F10-amp-audio-cb-radio-noise-filter-eliminator-suppressor-car-stereo%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/10-amp-audio-cb-radio-noise-filter-eliminator-suppressor-car-stereo/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/10-amp-audio-cb-radio-noise-filter-eliminator-suppressor-car-stereo/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/10-amp-audio-cb-radio-noise-filter-eliminator-suppressor-car-stereo/?share=telegram) - **Product categories:** CB radio Accessories --- ### [Multi Purpose Crimping & Cutting Tool Cable Wire Stripper Pliers Electrical](https://cbradio.co.uk/product/multi-purpose-crimping-cutting-tool-cable-wire-stripper-pliers-electrical/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧⚡ **Multi-Purpose Crimping Tool – Wire Stripper Cutter Pliers – Electrical Terminals Tool** **All-in-One • Durable • Essential Tool** This **multi-purpose crimping tool** is a must-have for **electrical work, automotive wiring, and DIY projects**, combining **crimping, stripping, and cutting** in one rugged tool. 👉 Perfect for **professionals and home users alike**. --- ### 🔥 **Why Choose This Tool** ✔ **Crimp, Strip & Cut – All in One Tool** ✔ **Works with Insulated & Non-Insulated Terminals** ✔ **Built for Strength & Reliability** ✔ **Time-Saving Multi-Function Design** --- ### ✅ **Key Features** ✔ **Crimps Insulated Terminals:** - Red (22–18 AWG) - Blue (16–14 AWG) - Yellow (12–10 AWG) ✔ **Crimps Non-Insulated Terminals:** - 10–12 AWG - 14–16 AWG - 22–18 AWG ✔ **Wire Stripping Function:** - Strips wire up to **10 AWG** ✔ **Cutting Function:** - Cuts wire and small bolts --- ### ⚙️ **Specifications** - Type: **Multi-Purpose Crimping Tool** - Functions: **Crimp / Strip / Cut** - Wire Capacity: **Up to 10 AWG** - Terminal Types: **Insulated & Non-Insulated** --- ### 🔧 **Perfect For** - Automotive wiring - CB & radio installations - Electrical repairs - DIY projects - Workshop use --- ### 💡 **Why Use a Multi-Tool** Instead of multiple tools: ✔ One tool does it all ✔ Faster workflow ✔ Less clutter 👉 A practical, **essential addition to any toolkit**. --- ### ⚠️ **Important Notes** ❗ Ensure correct terminal size when crimping ❗ Always use appropriate safety precautions --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Electrical connectors & terminals - Coax cable & connectors - CB installation accessories - Tools & workshop items --- ### 🔥 **Order Today** **One tool. Multiple jobs. Done right.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/multi-purpose-crimping-cutting-tool-cable-wire-stripper-pliers-electrical/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/multi-purpose-crimping-cutting-tool-cable-wire-stripper-pliers-electrical/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/multi-purpose-crimping-cutting-tool-cable-wire-stripper-pliers-electrical/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/multi-purpose-crimping-cutting-tool-cable-wire-stripper-pliers-electrical/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Multi%20Purpose%20Crimping%20%26%20Cutting%20Tool%20Cable%20Wire%20Stripper%20Pliers%20Electrical&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmulti-purpose-crimping-cutting-tool-cable-wire-stripper-pliers-electrical%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/multi-purpose-crimping-cutting-tool-cable-wire-stripper-pliers-electrical/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/multi-purpose-crimping-cutting-tool-cable-wire-stripper-pliers-electrical/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/multi-purpose-crimping-cutting-tool-cable-wire-stripper-pliers-electrical/?share=telegram) - **Product categories:** Tools --- ### [PL259 4 x UHF Coax Plugs 7-mm for Mini8 coax pack of 4 PL-259](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7-mm-for-mini8-coax-pack-of-4-pl-259/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **4x PL259 UHF Plugs 7mm – Mini 8 / RG8 Coax Connectors – Solder Type – Brown Insert** **Reliable Connection • Easy Soldering • Quality Build** This **pack of 4 PL259 UHF plugs** is designed for **Mini 8 (RG8 / RG8X) coax cable**, ideal for **CB and amateur radio installations**. 👉 Built for **strong, reliable connections without the hassle of cheap melting inserts**. --- ### 🔥 **Why Choose These PL259 Plugs** ✔ **Pack of 4 – Great Value** ✔ **Suitable for 7mm Cable (Mini 8 / RG8 / RG8X)** ✔ **Brown Heat-Resistant Inserts** ✔ **Easy to Solder – No Melting Issues** ✔ **Strong & Durable Metal Construction** --- ### ✅ **Key Features** ✔ **PL259 UHF Coax Plugs** ✔ **Solder Type Connection** ✔ **Designed for 7mm Coax Cable** ✔ **High Quality Build – Not Cheap Copies** ✔ **Reliable RF Performance** --- ### 📡 **Perfect For** - CB radio installations - Amateur (Ham) radio setups - Coax cable repairs - Custom cable builds - Workshop & DIY projects --- ### ⚙️ **Specifications** - Type: **PL259 (UHF Male)** - Quantity: **Pack of 4** - Cable Size: **7mm (Mini 8 / RG8 / RG8X)** - Connection: **Solder Type** - Insulator: **Brown Heat-Resistant Insert** --- ### 💡 **Why Brown Inserts Matter** Cheap plugs: - White inserts melt when soldering - Cause poor connections 👉 These plugs: ✔ Withstand heat ✔ Make soldering easier ✔ Provide long-lasting reliability --- ### 🔧 **Typical Use** ✔ Fit to coax cable ✔ Solder centre pin ✔ Screw body onto braid 👉 Simple and effective connection. --- ### ⚠️ **Important Notes** ❗ Designed for **7mm coax only** ❗ Ensure correct cable size before purchase --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable (Mini 8 / RG8 / RG58) - PL258 joiners - Antennas & mounts - SWR meters --- ### 🔥 **Order Today** **Solder it right. Connect it properly. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7-mm-for-mini8-coax-pack-of-4-pl-259/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7-mm-for-mini8-coax-pack-of-4-pl-259/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7-mm-for-mini8-coax-pack-of-4-pl-259/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7-mm-for-mini8-coax-pack-of-4-pl-259/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PL259%204%20x%20UHF%20Coax%20Plugs%207-mm%20for%20Mini8%20coax%20pack%20of%204%20PL-259&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-4-x-uhf-coax-plugs-7-mm-for-mini8-coax-pack-of-4-pl-259%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7-mm-for-mini8-coax-pack-of-4-pl-259/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7-mm-for-mini8-coax-pack-of-4-pl-259/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-4-x-uhf-coax-plugs-7-mm-for-mini8-coax-pack-of-4-pl-259/?share=telegram) - **Product categories:** PL259 Connectors --- ### [U-Bolts V-Bolt 4 Pack 1.75 x M8 for up to 1.5" aerial or antenna mast](https://cbradio.co.uk/product/u-bolts-v-bolt-4-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **PL258 Double Female Coupler – SO239 Joiner – 50Ω UHF Connector for PL259 Coax** **Strong • Reliable • Essential Connector** This **PL258 double female coupler (SO239 to SO239)** is used to **join two PL259 coax connectors**, making it ideal for **extending or linking coax cables** in CB and amateur radio setups. --- ### 🔥 **Why Choose This Coupler** ✔ **Joins 2 x PL259 Connectors** ✔ **All Metal Construction** ✔ **Bright Plated Finish** ✔ **Teflon Insulator for Durability** ✔ **Low Loss 50 Ohm Design** --- ### ✅ **Key Features** ✔ **PL258 (SO239 Double Female)** ✔ **50 Ohm Impedance** ✔ **Suitable for CB & Ham Radio** ✔ **Strong & Long Lasting Build** ✔ **Compact & Easy to Use** --- ### 📡 **Perfect For** - Extending coax cables - Joining two antenna leads - CB radio installations - Amateur (Ham) radio setups - Workshop & test setups --- ### ⚙️ **Specifications** - Type: **PL258 / SO239 Double Female Coupler** - Impedance: **50 Ohms** - Connector Type: **UHF (SO239 x 2)** - Construction: **All Metal with Teflon Insert** --- ### 💡 **Why You Need This** ✔ Quick way to extend cable runs ✔ No soldering required ✔ Reliable signal connection 👉 A must-have for **any radio toolkit**. --- ### ⚠️ **Important Notes** ❗ Designed for **PL259 connectors only** ❗ Ensure tight connection for best performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PL259 connectors - Coax cable & patch leads - Antennas & mounts - SWR meters --- ### 🔥 **Order Today** **Connect it. Extend it. Keep it simple.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/u-bolts-v-bolt-4-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/u-bolts-v-bolt-4-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/u-bolts-v-bolt-4-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/u-bolts-v-bolt-4-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20U-Bolts%20V-Bolt%204%20Pack%201.75%20x%20M8%20for%20up%20to%201.5%22%20aerial%20or%20antenna%20mast&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fu-bolts-v-bolt-4-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/u-bolts-v-bolt-4-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/u-bolts-v-bolt-4-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/u-bolts-v-bolt-4-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=telegram) - **Product categories:** Installation aid --- ### [PL258 Double Female Joiner Coupler for PL259 Coax connectors](https://cbradio.co.uk/product/pl258-double-female-joiner-coupler-for-pl259-coax-connectors/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **PL258 Double Female Coupler – SO239 Joiner – 50Ω UHF Connector for PL259 Coax** **Strong • Reliable • Essential Connector** This **PL258 double female coupler (SO239 to SO239)** is used to **join two PL259 coax connectors**, making it ideal for **extending or linking coax cables** in CB and amateur radio setups. --- ### 🔥 **Why Choose This Coupler** ✔ **Joins 2 x PL259 Connectors** ✔ **All Metal Construction** ✔ **Bright Plated Finish** ✔ **Teflon Insulator for Durability** ✔ **Low Loss 50 Ohm Design** --- ### ✅ **Key Features** ✔ **PL258 (SO239 Double Female)** ✔ **50 Ohm Impedance** ✔ **Suitable for CB & Ham Radio** ✔ **Strong & Long Lasting Build** ✔ **Compact & Easy to Use** --- ### 📡 **Perfect For** - Extending coax cables - Joining two antenna leads - CB radio installations - Amateur (Ham) radio setups - Workshop & test setups --- ### ⚙️ **Specifications** - Type: **PL258 / SO239 Double Female Coupler** - Impedance: **50 Ohms** - Connector Type: **UHF (SO239 x 2)** - Construction: **All Metal with Teflon Insert** --- ### 💡 **Why You Need This** ✔ Quick way to extend cable runs ✔ No soldering required ✔ Reliable signal connection 👉 A must-have for **any radio toolkit**. --- ### ⚠️ **Important Notes** ❗ Designed for **PL259 connectors only** ❗ Ensure tight connection for best performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PL259 connectors - Coax cable & patch leads - Antennas & mounts - SWR meters --- ### 🔥 **Order Today** **Connect it. Extend it. Keep it simple.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl258-double-female-joiner-coupler-for-pl259-coax-connectors/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl258-double-female-joiner-coupler-for-pl259-coax-connectors/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl258-double-female-joiner-coupler-for-pl259-coax-connectors/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl258-double-female-joiner-coupler-for-pl259-coax-connectors/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PL258%20Double%20Female%20Joiner%20Coupler%20for%20PL259%20Coax%20connectors&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl258-double-female-joiner-coupler-for-pl259-coax-connectors%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl258-double-female-joiner-coupler-for-pl259-coax-connectors/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl258-double-female-joiner-coupler-for-pl259-coax-connectors/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl258-double-female-joiner-coupler-for-pl259-coax-connectors/?share=telegram) - **Product categories:** RF Adaptors --- ### [Moonraker Tornado mini stinger springer cb antenna aerial White](https://cbradio.co.uk/product/large-springer-orbitor-cb-aerial-rear-mount-5m-cable-land-rover-defender-90/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙📡 **PSM-1 Land Rover Defender CB Aerial Kit – Rear Mount + Mini Stinger Antenna + 5m Cable** **Complete Kit • Defender Proven • Ready to Install** This **PSM-1 CB aerial kit** is the **go-to setup for Land Rover Defender owners**, commonly seen on **9 out of 10 Defenders**. 👉 Supplied as a **complete kit** with mount, cable, and Mini Stinger aerial – everything you need to get on air. --- ### 🔥 **Why Choose This Kit** ✔ **Complete Plug & Play Setup** ✔ **Defender-Specific Rear Mount** ✔ **Mini Stinger Off-Road Antenna Included** ✔ **High Quality RG58 Cable with PL259** ✔ **Clean Factory-Style Installation** --- ### 📡 **What’s Included** ✔ **PSM-1 Rear Mount (3/8 Stud)** ✔ **Mini Stinger CB Aerial (White)** ✔ **5 Metres High Quality RG58 Coax Cable** ✔ **PL259 Connector Fitted** 👉 Everything needed for a **professional installation**. --- ### 🚙 **Vehicle Compatibility** - Land Rover Defender 90 *(5m cable ideal)* - Land Rover Defender 110 *(7m version available in our shop)* 👉 Also suitable for: ✔ 4×4 vehicles ✔ Vans & trucks ✔ High roof vehicles --- ### ⚙️ **Specifications** - Mount Type: **PSM-1 Rear Mount (3/8 Stud)** - Antenna: **Mini Stinger CB Aerial** - Frequency: **27–28 MHz** - Cable: **5m RG58 Low Loss Coax** - Connector: **PL259 (Fitted)** --- ### 💡 **Why This Setup Works** ✔ Strong rear mounting position ✔ Clean, hidden bracket design ✔ Ideal antenna height for performance ✔ Built for off-road durability 👉 A **proven Defender setup**. --- ### 🔧 **Installation Notes** ✔ Mounts to rear of vehicle ✔ Cable routes neatly inside ✔ No messy external wiring 👉 Designed for a **clean, factory look**. --- ### ⚠️ **Important Notes** ❗ 5m cable suits Defender 90 ❗ 7m version available for Defender 110 ❗ Ensure proper grounding for best performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - SWR meters & tuning tools - Power leads & accessories - Additional mounts & aerials --- ### 🔥 **Order Today** **Defender ready. Off-road tough. Built properly.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-springer-orbitor-cb-aerial-rear-mount-5m-cable-land-rover-defender-90/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-springer-orbitor-cb-aerial-rear-mount-5m-cable-land-rover-defender-90/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-springer-orbitor-cb-aerial-rear-mount-5m-cable-land-rover-defender-90/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-springer-orbitor-cb-aerial-rear-mount-5m-cable-land-rover-defender-90/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Moonraker%20Tornado%20mini%20stinger%20springer%20cb%20antenna%20aerial%20White&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-springer-orbitor-cb-aerial-rear-mount-5m-cable-land-rover-defender-90%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-springer-orbitor-cb-aerial-rear-mount-5m-cable-land-rover-defender-90/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-springer-orbitor-cb-aerial-rear-mount-5m-cable-land-rover-defender-90/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-springer-orbitor-cb-aerial-rear-mount-5m-cable-land-rover-defender-90/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [SWR Meter for CB or 10m SWAR antenna test aerial check](https://cbradio.co.uk/product/swr-meter-for-cb-or-10m-swar-antenna-test-aerial-check/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📊 **CB SWR Meter 26–30MHz – Basic Standing Wave Ratio Meter – 100W 50Ω** **Protect Your Radio • Tune Your Antenna • Essential Tool** This **basic SWR meter** is a must-have for **any CB radio setup**, allowing you to **check and adjust your SWR** to protect your equipment and maximise performance. 👉 At this price, it’s simply not worth risking your radio without one. --- ### 🔥 **Why You Need an SWR Meter** ✔ Prevents damage to your radio ✔ Ensures efficient signal transmission ✔ Helps tune your antenna correctly ✔ Improves overall performance --- ### ✅ **Key Features** ✔ **Covers CB Band (26–30 MHz)** ✔ **Simple & Easy to Use** ✔ **Compact Design** ✔ **Accurate Readings (±5%)** ✔ **Supplied with Instructions** ✔ **Presented in Retail Packaging** --- ### 📡 **Perfect For** - CB radio users - Mobile installations - Base station setups - Antenna tuning - Beginners and experienced users --- ### ⚙️ **Specifications** - Frequency Range: **26 – 30 MHz** - Impedance: **50 Ohms** - Accuracy: **±5%** - Power Handling: **Up to 100 Watts** - Size: **85mm (W) x 80mm (H) x 58mm (D)** --- ### 💡 **Why This Meter Is Essential** Running without checking SWR can: - Damage your radio - Reduce transmission range - Cause poor performance 👉 This meter helps you **set it up properly from the start**. --- ### 🔧 **How It Works** ✔ Connect between radio and antenna ✔ Key the mic and take reading ✔ Adjust antenna for best SWR 👉 Simple process, big benefits. --- ### ⚠️ **Important Notes** ❗ **Patch lead NOT included** *(available separately)* ❗ Brand supplied may vary depending on stock *(specs identical)* ❗ Designed for CB frequencies only --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Patch leads (PL259 to PL259) - Antennas & mounts - Coax cable & connectors - CB radios --- ### 🔥 **Order Today** **Tune it right. Protect your gear. Stay on air.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/swr-meter-for-cb-or-10m-swar-antenna-test-aerial-check/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/swr-meter-for-cb-or-10m-swar-antenna-test-aerial-check/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/swr-meter-for-cb-or-10m-swar-antenna-test-aerial-check/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/swr-meter-for-cb-or-10m-swar-antenna-test-aerial-check/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SWR%20Meter%20for%20CB%20or%2010m%20SWAR%20antenna%20test%20aerial%20check&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fswr-meter-for-cb-or-10m-swar-antenna-test-aerial-check%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/swr-meter-for-cb-or-10m-swar-antenna-test-aerial-check/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/swr-meter-for-cb-or-10m-swar-antenna-test-aerial-check/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/swr-meter-for-cb-or-10m-swar-antenna-test-aerial-check/?share=telegram) - **Product categories:** SWR meters --- ### [Reverse Banjo 3/8 to DV-27 Adaptor for CB Aerial](https://cbradio.co.uk/product/reverse-banjo-3-8-to-dv-27-adaptor-for-cb-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔧 **Reverse Banjo Adaptor 3/8 to DV – Angle Adjustable Antenna Mount – CB / Ham** **Convert • Angle • Improve Setup** This **reverse banjo adaptor** allows you to **convert a standard 3/8 threaded mount to a DV (banjo) fitting**, giving you the ability to **angle your aerial for better positioning and clearance**. 👉 Perfect for **tight installs and adjustable antenna setups**. --- ### 🔥 **Why Choose This Adaptor** ✔ **Converts 3/8 Thread to DV (Banjo) Mount** ✔ **Allows Adjustable Aerial Angle** ✔ **Ideal for Low Clearance Situations** ✔ **Strong & Reliable Construction** --- ### ✅ **Key Features** ✔ **3/8 Thread Input (Base Side)** ✔ **DV Banjo Output (Aerial Side)** ✔ **Angle Adjustable Design** ✔ **Durable Metal Build** ✔ **Compact & Easy to Install** --- ### 📡 **Perfect For** - CB radio aerial setups - Amateur (Ham) radio installs - 4×4 & off-road vehicles - Vans & trucks - Roof rack or light bar mounting --- ### 💡 **Why Use a Banjo Adaptor** ✔ Angle antenna away from obstacles ✔ Reduce height for bridges or car parks ✔ Improve antenna positioning ✔ Prevent damage in tight spaces 👉 A simple upgrade that adds **flexibility and protection**. --- ### ⚙️ **Specifications** - Type: **Reverse Banjo Adaptor** - Input: **3/8 Thread** - Output: **DV (Banjo Type)** - Function: **Angle Adjustable Antenna Mount** --- ### 🔧 **Typical Setup** - Attach adaptor to **3/8 mount** - Fit DV aerial or whip - Adjust angle to suit installation 👉 Quick and effective solution. --- ### ⚠️ **Important Notes** ❗ Designed for **3/8 threaded mounts only** ❗ Requires compatible **DV aerial or fitting** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - DV mounts & aerials - 3/8 antennas - Coax cable & connectors - Mounting brackets --- ### 🔥 **Order Today** **Convert it. Angle it. Install it properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/reverse-banjo-3-8-to-dv-27-adaptor-for-cb-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/reverse-banjo-3-8-to-dv-27-adaptor-for-cb-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/reverse-banjo-3-8-to-dv-27-adaptor-for-cb-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/reverse-banjo-3-8-to-dv-27-adaptor-for-cb-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Reverse%20Banjo%203%2F8%20to%20DV-27%20Adaptor%20for%20CB%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Freverse-banjo-3-8-to-dv-27-adaptor-for-cb-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/reverse-banjo-3-8-to-dv-27-adaptor-for-cb-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/reverse-banjo-3-8-to-dv-27-adaptor-for-cb-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/reverse-banjo-3-8-to-dv-27-adaptor-for-cb-aerial/?share=telegram) - **Product categories:** RF Adaptors --- ### [FM Broadcast Dipole Antenna 87 to 108 MHz 500 Watts Band 2 Aerial](https://cbradio.co.uk/product/fm-broadcast-dipole-antenna-87-to-108-mhz-500-watts-band-2-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📻 **FM Broadcast Dipole Antenna 87–108MHz – 500W Band 2 Aerial – UK Made** **High Power • Tunable • Professional Quality** This **FM Band 2 dipole antenna** is designed for **87–108 MHz**, offering **excellent performance for FM reception and transmission applications**. 👉 Built in the UK using **high quality materials**, this is a **serious antenna for serious users**. --- ### 🔥 **Why Choose This Dipole** ✔ **Full FM Band Coverage (87–108 MHz)** ✔ **High Power Handling up to 500W** ✔ **Supplied with Mounting Bracket – Ready to Install** ✔ **Easy to Tune or Cut to Frequency** ✔ **Made in Britain – Quality Build** --- ### 📡 **Performance Highlights** - Frequency Range: **87 – 108 MHz (Band 2 FM)** - High efficiency dipole design - Strong signal performance for TX & RX 👉 Ideal for **clear broadcast and reception**. --- ### ✅ **Key Features** ✔ **Aluminium Elements** *(easy to cut & tune)* ✔ **SO239 Connector (Standard UHF)** ✔ **Element End Caps Included** ✔ **Polarity Indicator for Correct Orientation** ✔ **Heavy Duty Mounting Bracket Included** --- ### 📊 **Specifications** - Frequency: **87–108 MHz** - Power Handling: **500 Watts** - Connector: **SO239** - Construction: **Aluminium Elements** - Mounting: **Bracket Included** - Origin: **Made in Britain** --- ### 💡 **Tuning Options** ✔ Supplied with **Frequency Cutting Chart** ✔ We can **cut to your required frequency FREE of charge** 👉 Ensures optimal performance straight out the box. --- ### 📡 **Perfect For** - FM broadcast reception - Custom radio setups - Monitoring stations - Experimental RF projects --- ### ⚠️ **Important Notes** ❗ Ensure compliance with local regulations for transmission use ❗ Proper mounting and grounding recommended ❗ Coax cable not included --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable & connectors - Mast poles & brackets - SWR meters & tuning tools - RF accessories --- ### 🔥 **Order Today** **Tune it. Mount it. Broadcast or receive with confidence.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/fm-broadcast-dipole-antenna-87-to-108-mhz-500-watts-band-2-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/fm-broadcast-dipole-antenna-87-to-108-mhz-500-watts-band-2-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/fm-broadcast-dipole-antenna-87-to-108-mhz-500-watts-band-2-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/fm-broadcast-dipole-antenna-87-to-108-mhz-500-watts-band-2-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20FM%20Broadcast%20Dipole%20Antenna%2087%20to%20108%20MHz%20500%20Watts%20Band%202%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ffm-broadcast-dipole-antenna-87-to-108-mhz-500-watts-band-2-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/fm-broadcast-dipole-antenna-87-to-108-mhz-500-watts-band-2-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/fm-broadcast-dipole-antenna-87-to-108-mhz-500-watts-band-2-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/fm-broadcast-dipole-antenna-87-to-108-mhz-500-watts-band-2-aerial/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Senhaix N61 4G Network Android Mobile Radio](https://cbradio.co.uk/product/senhaix-sptt-n60-3g-network-android-mobile-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## DISCONTINUED ## 📡📱 **SenHaiX SPTT-N61 4G PoC Mobile Radio – Android Zello GPS WiFi Bluetooth – DISCONTINUED** **4G Network • Full Android • Professional Comms** The **SenHaiX SPTT‑N61** is a **4G Push-to-Talk over Cellular (PoC) mobile radio**, combining **radio-style communication with smartphone technology**. 👉 Now **DISCONTINUED**, making this a great opportunity to secure a **rare and capable unit**. --- ### 🔥 **Why Choose the SPTT-N61** ✔ **4G / 3G / 2G Network Support** ✔ **Zello & PTT4U Compatible** ✔ **Built-In GPS, WiFi & Bluetooth** ✔ **Touch Screen with Rotatable Display** ✔ **Phone Call & SMS Functionality** --- ### 🌍 **How It Works** Unlike traditional radios: - Uses **mobile networks instead of RF repeaters** 👉 Result: ✔ **Nationwide / Worldwide communication** ✔ Group or private calls via apps ✔ No range limitations like CB or PMR --- ### 📲 **Key Features** ✔ **Android-Based Mobile Radio** ✔ **180° Rotatable LCD Touch Screen** ✔ **Group Call / Private Call Functions** ✔ **Zello & PTT4U Fully Supported** ✔ **Built-In GPS Tracking** ✔ **WiFi & Bluetooth Connectivity** ✔ **Mobile Phone Calls & SMS** --- ### 🔊 **Audio & Performance** ✔ **1W loudspeaker (50Ω)** ✔ Clear digital audio over cellular ✔ Reliable comms wherever signal exists --- ### 🚗 **Perfect For** - Fleet & transport companies - Security teams - Event coordination - Off-road & expedition vehicles - Business communication systems --- ### ⚙️ **Specifications** - Model: **SenHaiX SPTT-N61** - Network: **4G / 3G (WCDMA) / 2G (GSM)** - Operating System: **Android** - Display: **LCD Touch Screen (Rotatable)** - Connectivity: **WiFi / Bluetooth / GPS** - Audio: **1W Loudspeaker (50Ω)** - Power Requirement: **13.8V DC** --- ### 📦 **Important Information** ❗ **DISCONTINUED MODEL – LIMITED AVAILABILITY** ❗ **Power supply NOT included** *(requires 13.8V DC)* ❗ Requires **SIM card or WiFi to operate** --- ### 💡 **Why This Radio Stands Out** ✔ Combines radio + smartphone functionality ✔ Ideal for professional communication ✔ No RF licensing or range issues 👉 A **modern solution for serious users**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to configure --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - 13.8V power supplies - External speakers & mics - Mounting brackets - Communication accessories --- ### 🔥 **Order Today** **Discontinued. Powerful. Hard to find.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/senhaix-sptt-n60-3g-network-android-mobile-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/senhaix-sptt-n60-3g-network-android-mobile-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/senhaix-sptt-n60-3g-network-android-mobile-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/senhaix-sptt-n60-3g-network-android-mobile-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Senhaix%20N61%204G%20Network%20Android%20Mobile%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsenhaix-sptt-n60-3g-network-android-mobile-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/senhaix-sptt-n60-3g-network-android-mobile-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/senhaix-sptt-n60-3g-network-android-mobile-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/senhaix-sptt-n60-3g-network-android-mobile-radio/?share=telegram) - **Product categories:** Network radio --- ### [network radio UK INRICO T192 unlimited range license free zello echolink](https://cbradio.co.uk/product/network-radio-uk-inrico-t199-unlimited-range-license-free-zello-echolink/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📱 **Inrico T192 3G WiFi PoC Radio – Zello Network Walkie Talkie – Worldwide Comms** **Global Range • App Based • No RF Limits** The **Inrico T192** is a **cellular (PoC – Push-to-Talk over Cellular) radio** that works like a walkie talkie—but instead of radio waves, it uses **mobile data or WiFi**. 👉 This means **worldwide communication**, not just local range. --- ### 🔥 **Why Choose the Inrico T192** ✔ **Unlimited Range via Cellular Network** ✔ **Works Over 3G & WiFi** ✔ **Supports Zello & Other Apps** ✔ **Excellent Audio Quality** ✔ **Professional Radio Feel with Smartphone Power** --- ### 🌍 **How It Works** Unlike traditional radios: - Uses **cellular network as a repeater** - No need for repeaters or antennas for distance 👉 Result: ✔ Handheld-to-handheld communication **anywhere in the world** ✔ Private or group communication via apps --- ### 📡 **Perfect For** - Transport & logistics - Security teams - Events & coordination - Business communication - Off-road & travel groups --- ### 📲 **Key Features** ✔ **Android-Based Radio (Android 4.4.2)** ✔ **Zello Fully Supported** ✔ **GSM / WCDMA Connectivity** ✔ **WiFi Enabled** ✔ **USB Programming via PC** ✔ **App Installation via Computer** ✔ **2.5mm & 3.5mm Audio Ports** --- ### 🔊 **Performance Benefits** ✔ Clear digital audio ✔ No static or interference ✔ Reliable communication via mobile networks 👉 Works wherever **mobile signal or WiFi is available**. --- ### 📦 **What’s Included** ✔ Inrico T192 Radio ✔ Battery ✔ Battery Charger ✔ USB Cable ✔ Antenna ✔ Belt Clip --- ### 💡 **Usage Options** ✔ Use with SIM card *(e.g. low-cost data plans)* ✔ Use over WiFi ✔ Connect via apps like: - Zello - TeamSpeak 👉 Low running cost – just your data plan. --- ### ⚠️ **Important Notes** ❗ **Does NOT transmit on CB or amateur radio bands** ❗ Requires **SIM card or WiFi connection** ❗ Programming via PC required for setup --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to configure --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Headsets & microphones - Radio accessories - Mounts & holders - Communication solutions --- ### 🔥 **Order Today** **No range limits. No interference. Just talk.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/network-radio-uk-inrico-t199-unlimited-range-license-free-zello-echolink/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/network-radio-uk-inrico-t199-unlimited-range-license-free-zello-echolink/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/network-radio-uk-inrico-t199-unlimited-range-license-free-zello-echolink/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/network-radio-uk-inrico-t199-unlimited-range-license-free-zello-echolink/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20network%20radio%20UK%20INRICO%20T192%20unlimited%20range%20license%20free%20zello%20echolink&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fnetwork-radio-uk-inrico-t199-unlimited-range-license-free-zello-echolink%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/network-radio-uk-inrico-t199-unlimited-range-license-free-zello-echolink/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/network-radio-uk-inrico-t199-unlimited-range-license-free-zello-echolink/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/network-radio-uk-inrico-t199-unlimited-range-license-free-zello-echolink/?share=telegram) - **Product categories:** Network radio --- ### [20ft mast in 4 swaged sections Heavy Duty Gauge Swaged Pole Set - 20ft x 38mm](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-38mm/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🗼 **20ft Heavy Duty Mast Pole Set – 38mm Aluminium – 4 Section Swaged Antenna Mast** **Strong • Lightweight • Easy Install** This **20ft aluminium swaged mast pole set** offers a **perfect balance of strength and weight**, making it ideal for **both portable and permanent antenna installations**. 👉 Great for **CB, amateur radio, TV aerials, and light-duty setups**. --- ### 🔥 **Why Choose This Mast** ✔ **Heavy Duty 2.65mm Wall Thickness** ✔ **38mm Diameter – Strong Yet Manageable** ✔ **4 Section Swaged Design for Secure Fit** ✔ **Easy Transport & Assembly** --- ### ✅ **Key Features** ✔ **Total Height: 20ft (Approx. 6 metres)** ✔ **4 x 5ft Swaged Sections** ✔ **Interlocking Push-Fit Design** ✔ **Corrosion Resistant Aluminium** ✔ **Ideal for Portable or Fixed Installations** --- ### 📡 **Perfect For** - CB radio base antennas - Amateur (Ham) radio aerials - TV aerial mounting - Lightweight antenna systems - Temporary field setups --- ### ⚙️ **Specifications** - Type: **Swaged Aluminium Mast Pole Set** - Total Length: **20ft (6m approx.)** - Sections: **4 x 5ft** - Diameter: **38mm OD (1.5 inch)** - Wall Thickness: **2.65mm (Heavy Duty Gauge)** --- ### 💡 **Why Choose 38mm** ✔ Easier to handle than larger poles ✔ Lighter for transport and setup ✔ Strong enough for most standard antennas 👉 Ideal for **general-purpose installations**. --- ### 🔧 **Installation Options** ✔ Wall brackets ✔ Chimney lashing kits ✔ Ground mounting setups 👉 Flexible for **home or portable use**. --- ### ⚠️ **Important Notes** ❗ Use **guy wires or brackets for stability** ❗ Not suitable for heavy or very large antennas ❗ Always secure properly in windy conditions --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to assemble --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Lashing kits & brackets - Guy rope & tensioners - Antennas & mounts - Coax cable & connectors --- ### 🔥 **Order Today** **Lightweight strength. Reliable support. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-38mm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2020ft%20mast%20in%204%20swaged%20sections%20Heavy%20Duty%20Gauge%20Swaged%20Pole%20Set%20-%2020ft%20x%2038mm&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-38mm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [20ft mast in 4 swaged sections Heavy Duty Gauge Swaged Pole Set - 20ft x 51mm](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-51mm/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🗼 **20ft Heavy Duty Mast Pole Set – 51mm Aluminium – 4 Section Swaged Antenna Mast** **Strong • Thick Gauge • Professional Grade** This **20ft heavy duty aluminium mast pole set** is designed for **serious antenna installations**, offering **maximum strength and stability** with its **thick 2.65mm gauge tubing**. 👉 Ideal for **CB, amateur radio, TV aerials, and satellite setups**. --- ### 🔥 **Why Choose This Mast** ✔ **Heavy Duty 2.65mm Thick Aluminium** ✔ **Large 51mm (2”) Diameter for Strength** ✔ **4 Section Swaged Design – Secure Fit** ✔ **Suitable for Permanent or Portable Installations** --- ### ✅ **Key Features** ✔ **Total Height: 20ft (Approx. 6 metres)** ✔ **4 x 5ft Swaged Sections** ✔ **Strong Interlocking Design** ✔ **Corrosion Resistant Aluminium** ✔ **Easy to Transport & Assemble** --- ### 📡 **Perfect For** - CB radio base antennas - Amateur (Ham) radio installations - TV aerial mounting - Satellite dish poles - Temporary or field setups --- ### ⚙️ **Specifications** - Type: **Swaged Aluminium Mast Pole Set** - Total Length: **20ft (6m approx.)** - Sections: **4 x 5ft** - Diameter: **51mm OD (2 inch)** - Wall Thickness: **2.65mm (Heavy Duty Gauge)** - Weight: **Approx. 6.6kg** --- ### 💡 **Why Go Heavy Duty** Compared to lighter poles: ✔ Stronger in high winds ✔ Less flex under load ✔ Better for larger antennas 👉 Built for **reliability and long-term use**. --- ### 🔧 **Installation Options** ✔ Wall brackets ✔ Chimney lashing kits ✔ Ground mounted setups 👉 Suitable for **home or field installations**. --- ### ⚠️ **Important Notes** ❗ Ensure proper securing (guy wires or brackets recommended) ❗ Not designed for unsupported free-standing use ❗ Check load capacity depending on antenna size --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to assemble --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Chimney lashing kits - Guy wire & tensioners - Antennas & mounts - Coax cable & connectors --- ### 🔥 **Order Today** **Strong build. Solid support. Done properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-51mm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-51mm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-51mm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-51mm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2020ft%20mast%20in%204%20swaged%20sections%20Heavy%20Duty%20Gauge%20Swaged%20Pole%20Set%20-%2020ft%20x%2051mm&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-51mm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-51mm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-51mm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-heavy-duty-gauge-swaged-pole-set-20ft-x-51mm/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [CB VHF UHF aerial antenna bull bar roll cage weld on bracket 2mm](https://cbradio.co.uk/product/cb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚙 **CB / VHF / UHF Aerial Weld-On Bracket – Bull Bar / Roll Cage Mount – 2mm Steel** **Heavy Duty • No Drilling • Built for Off-Road** This **2mm steel weld-on aerial bracket** is designed for **mounting CB, VHF, or UHF antennas** on **bull bars, roll cages, or custom builds**. 👉 Perfect for those who **don’t want to drill their roof** or are running **soft top vehicles**. --- ### 🔥 **Why Choose This Bracket** ✔ **No Roof Drilling Required** ✔ **Heavy Duty 2mm Steel Construction** ✔ **Ideal for Off-Road & 4×4 Builds** ✔ **Designed for Strong Permanent Installation** --- ### ✅ **Key Features** ✔ **2mm Thick Steel Bracket** ✔ **Weld-On Design for Maximum Strength** ✔ **Perfect for Roll Cage or Bull Bar Mounting** ✔ **Uncoated Steel – Ready for Custom Finish** ✔ **Designed for Dome Mount Compatibility** --- ### 🚙 **Perfect For** - 4×4 off-road vehicles - Land Rover builds - Trucks & pickups - Roll cage setups - Bull bar installations --- ### 🔧 **Installation** ✔ Weld directly onto **roll cage or bull bar** ✔ Position for optimal antenna placement ✔ Paint or coat after welding for corrosion protection 👉 Ideal for **custom builds and professional installs**. --- ### ⚙️ **Specifications** - Material: **2mm Steel (Un-treated)** - Type: **Weld-On Antenna Bracket** - Use: **CB / VHF / UHF Aerial Mounting** - Compatibility: **Dome mounts (sold separately)** --- ### 💡 **Why Use a Weld-On Bracket** Bolt-on mounts: - Can loosen over time - Limited positioning options 👉 Weld-on bracket: ✔ Maximum strength ✔ Permanent solution ✔ Clean custom look --- ### ⚠️ **Important Notes** ❗ **Supplied as raw steel (unpainted)** ❗ **Dome mount NOT included** *(shown for illustration only)* ❗ Welding required for installation --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready for fabrication --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Dome mounts & cables - CB / VHF / UHF antennas - Coax cable & connectors - 4×4 mounting solutions --- ### 🔥 **Order Today** **No drilling. No compromise. Built for serious installs.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20VHF%20UHF%20aerial%20antenna%20bull%20bar%20roll%20cage%20weld%20on%20bracket%202mm&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-vhf-uhf-aerial-antenna-bull-bar-roll-cage-weld-on-bracket-2mm/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [DIN in dash mount face plate for Albrecht 6190 6690 6199 CB radio](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-albrecht-6190-6690-6199-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📻 **DIN Mount CB Radio Adapter – Metal In-Dash Bracket – Albrecht / Anytone / Lafayette** **Professional Fit • All Metal • Clean Install** This **DIN mounting adapter** allows you to install your **CB radio neatly into a standard car stereo slot**, giving a **clean, factory-style finish**. 👉 Ideal for **modern vehicle installs and professional setups**. --- ### 🔥 **Why Choose This DIN Mount** ✔ **All Metal Construction – No Cheap Plastic** ✔ **Professional In-Dash Installation** ✔ **Secure & Solid Fit** ✔ **Designed for Specific CB Models** --- ### ✅ **Compatible Models** ✔ Albrecht AE 6190 ✔ Albrecht AE 6690 ✔ Albrecht AE 6199 ✔ Anytone AT-300M ✔ Lafayette Ares Pro ✔ Lafayette Zeus ✔ Lafayette Atena 👉 Ensures a **perfect fit for supported radios**. --- ### ⚙️ **Specifications** - Type: **DIN Mount Adapter (In-Dash)** - Slot Size: **142 x 42 mm** - Material: **Full Metal Construction** - Installation: **Standard DIN Slot** --- ### 💡 **Why Use a DIN Mount** Without a DIN mount: - Radios look messy - Loose or unstable installation - Wires exposed 👉 With this mount: ✔ Clean OEM-style finish ✔ Secure positioning ✔ Professional appearance --- ### 🔊 **Important Installation Note** ❗ Using a DIN mount will **cover the radio’s built-in speaker** 👉 An **external speaker is required** for audio output --- ### 🚗 **Perfect For** - Cars & vans - 4×4 installations - Professional CB installs - Fleet vehicles --- ### ⚠️ **Important Notes** ❗ **CB radio NOT included** ❗ Check compatibility before purchase ❗ External speaker required --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - External speakers - CB radios - Coax cable & connectors - Antennas & mounts --- ### 🔥 **Order Today** **Clean install. Solid fit. Done properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-albrecht-6190-6690-6199-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-albrecht-6190-6690-6199-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-albrecht-6190-6690-6199-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-albrecht-6190-6690-6199-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DIN%20in%20dash%20mount%20face%20plate%20for%20Albrecht%206190%206690%206199%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdin-in-dash-mount-face-plate-for-albrecht-6190-6690-6199-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-albrecht-6190-6690-6199-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-albrecht-6190-6690-6199-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-albrecht-6190-6690-6199-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [front bumper IMPACT PAD 1998 2002 Toyota LandCruiser amazon 100 series](https://cbradio.co.uk/product/front-bumper-impact-pad-1998-2002-toyota-landcruiser-amazon-100-series/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Toyota Land Cruiser 100 Front Bumper Impact Pad – Genuine – 52611-60010** **Genuine Toyota Part • Structural Component • Direct Fit** This **front bumper impact pad** has been removed from a **Toyota Land Cruiser 100 Series (Amazon)** currently being dismantled and is supplied as a **genuine used part in good working condition**. 👉 Fits onto the **steel reinforcement bar behind the plastic bumper**. --- ### ✅ **Key Features** ✔ **Genuine Toyota OEM Part** ✔ **Part Number: 52611-60010** ✔ **Direct Replacement Fit** ✔ **Removed from Complete Vehicle** ✔ **Cost-Effective Alternative to New** --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 100 Series - Model: **Amazon** 👉 May fit multiple years – please check part number compatibility --- ### 🔧 **Part Function** ✔ Mounted on **steel reinforcement bar behind front bumper** ✔ Helps **absorb impact energy** ✔ Supports overall **bumper structure integrity** --- ### ⚙️ **Specifications** - Part Name: **Front Bumper Impact Pad** - Toyota Part Number: **52611-60010** - Location: **Behind Front Bumper (Reinforcement Bar)** - Condition: **Used – Good Working Order** --- ### 💡 **Why Replace This Part** ✔ Damaged in minor impact ✔ Cracked or degraded pad ✔ Needed for bumper rebuild or restoration 👉 Ensures **proper protection and structure**. --- ### ⚠️ **Important Notes** ❗ Used part – may show minor signs of wear ❗ Ensure part number matches your vehicle ❗ Professional fitting recommended if unsure --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Additional Land Cruiser 100 parts - Interior & exterior components - Suspension & mechanical parts - 4×4 accessories --- ### 🔥 **Order Today** **Genuine part. Proper repair. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/front-bumper-impact-pad-1998-2002-toyota-landcruiser-amazon-100-series/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/front-bumper-impact-pad-1998-2002-toyota-landcruiser-amazon-100-series/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/front-bumper-impact-pad-1998-2002-toyota-landcruiser-amazon-100-series/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/front-bumper-impact-pad-1998-2002-toyota-landcruiser-amazon-100-series/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20front%20bumper%20IMPACT%20PAD%201998%202002%20Toyota%20LandCruiser%20amazon%20100%20series&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ffront-bumper-impact-pad-1998-2002-toyota-landcruiser-amazon-100-series%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/front-bumper-impact-pad-1998-2002-toyota-landcruiser-amazon-100-series/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/front-bumper-impact-pad-1998-2002-toyota-landcruiser-amazon-100-series/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/front-bumper-impact-pad-1998-2002-toyota-landcruiser-amazon-100-series/?share=telegram) - **Product categories:** Land Cruiser --- ### [Toyota Landcruiser Amazon (100 SERIES) computer assy outer mirror control ecu](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-series-computer-assy-outer-mirror-control-ecu/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Toyota Land Cruiser 100 Mirror Control Module ECU – 89430-60010 – Genuine Used** **Genuine Toyota Part • Tested Working • Direct Replacement** This **outer mirror control module (Computer Assy.)** has been removed from a **Toyota Land Cruiser 100 Series (Amazon)** and is supplied in **working order**. 👉 Ideal for fixing **electric mirror faults or control issues**. --- ### ✅ **Key Features** ✔ **Genuine Toyota Part** ✔ **Part Number: 89430-60010** ✔ **Removed from Running Vehicle** ✔ **Fully Functional at Time of Removal** ✔ **Direct Replacement – No Modifications Needed** --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 100 Series - Model Year: **1998 (donor vehicle)** 👉 May fit other years/models – please check part number compatibility --- ### 🔧 **Perfect For Fixing** ✔ Electric mirror not adjusting ✔ Mirror switch not responding ✔ Faulty mirror ECU/module ✔ Intermittent mirror operation --- ### ⚙️ **Specifications** - Part Name: **Outer Mirror Control Module (Computer Assy.)** - Toyota Part Number: **89430-60010** - Condition: **Used – Tested Working** --- ### 💡 **Why Buy Used Genuine Parts** ✔ Cheaper than new OEM ✔ Guaranteed correct fit ✔ Better reliability than cheap aftermarket --- ### ⚠️ **Important Notes** ❗ Used part – may show minor wear marks ❗ Ensure part number matches your vehicle ❗ Professional fitting recommended if unsure --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Parts Available** 👉 Check our shop for: - Land Cruiser 100 parts - Interior modules & switches - Suspension & 4×4 parts - CB radio & vehicle accessories --- ### 🔥 **Order Today** **Genuine part. Proper fix. Back on the road.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-series-computer-assy-outer-mirror-control-ecu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-series-computer-assy-outer-mirror-control-ecu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-series-computer-assy-outer-mirror-control-ecu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-series-computer-assy-outer-mirror-control-ecu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20Landcruiser%20Amazon%20%28100%20SERIES%29%20computer%20assy%20outer%20mirror%20control%20ecu&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-amazon-100-series-computer-assy-outer-mirror-control-ecu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-series-computer-assy-outer-mirror-control-ecu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-series-computer-assy-outer-mirror-control-ecu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-series-computer-assy-outer-mirror-control-ecu/?share=telegram) - **Product categories:** Land Cruiser --- ### [25 Metre TV aerial extension lead motorhome caravan boat](https://cbradio.co.uk/product/25-metre-tv-aerial-extension-lead-motorhome-caravan-boat/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📺🚐 **25m TV Aerial Extension Lead – Double Screened Coax – Caravan Motorhome Boat** **Long Reach • Low Loss • Ready to Use** This **25 metre TV aerial extension lead** is perfect for situations where your **aerial socket is far from your vehicle or setup**. 👉 Ideal for **caravans, motorhomes, boats, and outdoor use**. --- ### 🔥 **Why Choose This Lead** ✔ **Extra Long 25 Metre Cable** ✔ **Low Loss Double Screened Coax** ✔ **Pre-Fitted Plugs – Plug & Play** ✔ **Reliable Signal Over Distance** --- ### ✅ **Key Features** ✔ **25m Extension Lead** ✔ **Double Screened Coaxial Cable** ✔ **2 x Male Aerial Plugs Fitted** ✔ **High Quality Build – Not Cheap Cable** ✔ **Ready to Use Straight Out the Box** --- ### 🚐 **Perfect For** - Caravans & motorhomes - Boats & marine use - Horse boxes & trailers - Camping & touring setups - Home TV aerial extensions --- ### 📡 **Performance Benefits** ✔ Reduced signal loss over long distances ✔ Improved shielding against interference ✔ Consistent TV signal quality 👉 Built to perform where standard leads struggle. --- ### 💡 **Why Quality Matters** Cheap leads: - Lose signal over long runs - Poor shielding - Cause picture breakup 👉 This lead: ✔ Uses **low loss cable** ✔ Double screened for **better reception** ✔ Reliable even at **long distances** --- ### ⚙️ **Specifications** - Length: **25 Metres** - Cable Type: **Double Screened Coax** - Connectors: **2 x Male TV Aerial Plugs** - Use: **TV / Freeview / Aerial Extension** --- ### ⚠️ **Important Notes** ❗ Ensure compatibility with your aerial sockets ❗ Designed for standard TV aerial connections --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Shorter & longer aerial leads - Splitters & connectors - TV & satellite accessories - Coax cable & adaptors --- ### 🔥 **Order Today** **Long reach. Clear signal. No compromise.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/25-metre-tv-aerial-extension-lead-motorhome-caravan-boat/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/25-metre-tv-aerial-extension-lead-motorhome-caravan-boat/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/25-metre-tv-aerial-extension-lead-motorhome-caravan-boat/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/25-metre-tv-aerial-extension-lead-motorhome-caravan-boat/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2025%20Metre%20TV%20aerial%20extension%20lead%20motorhome%20caravan%20boat&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F25-metre-tv-aerial-extension-lead-motorhome-caravan-boat%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/25-metre-tv-aerial-extension-lead-motorhome-caravan-boat/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/25-metre-tv-aerial-extension-lead-motorhome-caravan-boat/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/25-metre-tv-aerial-extension-lead-motorhome-caravan-boat/?share=telegram) - **Product categories:** Installation aid --- ### [dipole centre 3/8 to so239 connector Ideal for cb ham radio antenna project](https://cbradio.co.uk/product/dipole-centre-3-8-to-so239-connector-ideal-for-cb-ham-radio-antenna-project/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔧 **Dipole Centre 3/8 to SO239 – Straight Connector – CB / Ham Antenna Project 500W** **Strong • Simple • Perfect for DIY Antennas** This **straight dipole centre connector** is ideal for **building your own CB or amateur radio antenna**, allowing you to connect **two 3/8 aerial elements with an SO239 feed point**. 👉 Perfect for **custom dipole builds and antenna experiments**. --- ### 🔥 **Why Choose This Dipole Centre** ✔ **Dual 3/8 Thread Connections** ✔ **SO239 Feed Point (Standard UHF)** ✔ **Handles Up to 500W Power** ✔ **Simple & Effective Design** --- ### ✅ **Key Features** ✔ **Straight Dipole Centre Connector** ✔ **2 x 3/8 Thread Mounts (for aerial elements)** ✔ **SO239 Socket for Coax Feed** ✔ **Durable Construction** ✔ **Ideal for DIY Antenna Projects** --- ### 📡 **Perfect For** - CB dipole antennas - Amateur (Ham) antenna builds - Base station antenna projects - Experimental aerial setups - Custom 3/8 whip configurations --- ### ⚙️ **Specifications** - Type: **Straight Dipole Centre Connector** - Connections: **2 x 3/8 Thread** - Feed Connection: **SO239 (UHF Female)** - Power Handling: **Up to 500 Watts** --- ### 💡 **Why Use This Design** ✔ Quick way to build a dipole using 3/8 aerials ✔ Strong mechanical connection ✔ Easy coax connection via PL259 ✔ Ideal for portable or fixed setups 👉 A **simple and effective antenna solution**. --- ### 🔧 **Typical Setup** - Attach 2 x 3/8 antennas or whips - Connect coax via PL259 to SO239 - Mount in elevated position 👉 Ready for **CB or amateur use**. --- ### ⚠️ **Important Notes** ❗ Requires **PL259 coax connector** ❗ Ensure correct mounting and support ❗ Antennas/whips not included --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - 3/8 antennas & whips - Coax cable & connectors - Mounts & brackets - SWR meters & tuning tools --- ### 🔥 **Order Today** **Build it your way. Simple. Strong. Effective.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/dipole-centre-3-8-to-so239-connector-ideal-for-cb-ham-radio-antenna-project/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/dipole-centre-3-8-to-so239-connector-ideal-for-cb-ham-radio-antenna-project/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/dipole-centre-3-8-to-so239-connector-ideal-for-cb-ham-radio-antenna-project/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/dipole-centre-3-8-to-so239-connector-ideal-for-cb-ham-radio-antenna-project/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20dipole%20centre%203%2F8%20to%20so239%20connector%20Ideal%20for%20cb%20ham%20radio%20antenna%20project&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdipole-centre-3-8-to-so239-connector-ideal-for-cb-ham-radio-antenna-project%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/dipole-centre-3-8-to-so239-connector-ideal-for-cb-ham-radio-antenna-project/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/dipole-centre-3-8-to-so239-connector-ideal-for-cb-ham-radio-antenna-project/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/dipole-centre-3-8-to-so239-connector-ideal-for-cb-ham-radio-antenna-project/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [Cable Bushes Feed Through Coax Hole Tidy](https://cbradio.co.uk/product/2x-single-cable-bushes-feed-through-wall-cover-coaxial-hole-tidy-cap-rg58-rg8x/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **2x Cable Feed Through Bushes – Wall Entry Cover Caps – RG58 / RG8X Grommets 31mm** **Neat Finish • Protect Your Cable • Weather Resistant** These **feed-through cable bushes (pack of 2)** are designed to **tidy and protect cable entry points** where coax cables pass through walls, brickwork, or panels. 👉 Ideal for **RG58, RG8X and similar coax cables**. --- ### 🔥 **Why Use Cable Bushes** ✔ **Covers messy or damaged holes** ✔ **Protects cable from sharp edges** ✔ **Improves installation appearance** ✔ **Helps prevent water ingress (with sealant)** --- ### ✅ **Key Features** ✔ **Pack of 2 Feed Through Bushes** ✔ **Suitable for RG58 / RG8X Coax Cable** ✔ **Self-Grip Fit or Silicone Fixing Option** ✔ **Strong & Durable Construction** ✔ **Clean, Professional Finish** --- ### 🏠 **Perfect For** - Wall cable entry points - Brickwork & plasterboard - Wood panels & sheds - Indoor & outdoor installations - Radio / TV / antenna cable routing --- ### ⚙️ **Specifications** - Quantity: **2 Bushes** - Cap Diameter: **31mm** - Depth: **27mm** - Max Cable Diameter: **8mm** - Required Hole Size: **10mm Cut-Out** --- ### 💡 **Installation Options** ✔ Push-fit (self gripping) ✔ Fix with **silicone sealant** for waterproofing 👉 For best results: - Apply silicone around the bush - Insert into hole - Seal edges for weather protection --- ### ⚠️ **Important Notes** ❗ Max cable diameter **8mm** ❗ Sealant recommended for outdoor use ❗ Ensure correct hole size before fitting --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable (RG58 / RG8X) - Connectors & adaptors - Antennas & mounts - Cable accessories --- ### 🔥 **Order Today** **Neat install. Protected cable. Done properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2x-single-cable-bushes-feed-through-wall-cover-coaxial-hole-tidy-cap-rg58-rg8x/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2x-single-cable-bushes-feed-through-wall-cover-coaxial-hole-tidy-cap-rg58-rg8x/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2x-single-cable-bushes-feed-through-wall-cover-coaxial-hole-tidy-cap-rg58-rg8x/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2x-single-cable-bushes-feed-through-wall-cover-coaxial-hole-tidy-cap-rg58-rg8x/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Cable%20Bushes%20Feed%20Through%20Coax%20Hole%20Tidy&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2x-single-cable-bushes-feed-through-wall-cover-coaxial-hole-tidy-cap-rg58-rg8x%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2x-single-cable-bushes-feed-through-wall-cover-coaxial-hole-tidy-cap-rg58-rg8x/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2x-single-cable-bushes-feed-through-wall-cover-coaxial-hole-tidy-cap-rg58-rg8x/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2x-single-cable-bushes-feed-through-wall-cover-coaxial-hole-tidy-cap-rg58-rg8x/?share=telegram) - **Product categories:** Coax Cable --- ### [adjustable rig Radio mounting bracket cb or amateur ham radio](https://cbradio.co.uk/product/adjustable-rig-radio-mounting-bracket-cb-or-amateur-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📻 **Adjustable Radio Mounting Bracket – CB / Ham Radio – 125–225mm Width Universal Fit** **Universal Fit • Strong • Fully Adjustable** This **adjustable radio mounting bracket** is ideal for securely installing **CB and amateur (ham) radios** in vehicles, shacks, or workspaces. 👉 Designed to fit a wide range of radios with **adjustable width from 125mm to 225mm (5″–9″)**. --- ### 🔥 **Why Choose This Bracket** ✔ **Adjustable Width – Fits Multiple Radios** ✔ **Strong & Stable Mounting Solution** ✔ **Compact Height Design** ✔ **Easy Installation** --- ### ✅ **Key Features** ✔ **Adjustable Width: 125mm – 225mm (5″–9″)** ✔ **Height: 65mm (Approx. 2.5″)** ✔ **Universal Fit for CB & Ham Radios** ✔ **Durable Construction** ✔ **Ideal for Mobile or Base Installations** --- ### 📡 **Perfect For** - CB radio installations - Amateur (Ham) radio setups - Vehicle dashboards - Under-dash mounting - Workshop or shack setups --- ### ⚙️ **Specifications** - Type: **Adjustable Radio Mounting Bracket** - Width Adjustment: **125mm – 225mm** - Height: **65mm** - Use: **CB & Amateur Radio Mounting** --- ### 💡 **Why Adjustable Matters** Fixed brackets: - Don’t fit all radios - Limit flexibility 👉 This bracket: ✔ Fits a wide range of models ✔ Ideal for upgrades or changes ✔ Saves buying multiple mounts --- ### 🔧 **Installation Options** ✔ Under dash ✔ Dashboard mount ✔ Bench / shack mount 👉 Versatile for **any setup**. --- ### ⚠️ **Important Notes** ❗ Check radio dimensions before purchase ❗ Mounting hardware may be required depending on install --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB & Ham radios - Microphones & accessories - Power cables & connectors - Antennas & mounts --- ### 🔥 **Order Today** **Adjust it. Fit it. Mount it properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/adjustable-rig-radio-mounting-bracket-cb-or-amateur-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/adjustable-rig-radio-mounting-bracket-cb-or-amateur-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/adjustable-rig-radio-mounting-bracket-cb-or-amateur-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/adjustable-rig-radio-mounting-bracket-cb-or-amateur-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20adjustable%20rig%20Radio%20mounting%20bracket%20cb%20or%20amateur%20ham%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fadjustable-rig-radio-mounting-bracket-cb-or-amateur-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/adjustable-rig-radio-mounting-bracket-cb-or-amateur-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/adjustable-rig-radio-mounting-bracket-cb-or-amateur-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/adjustable-rig-radio-mounting-bracket-cb-or-amateur-ham-radio/?share=telegram) - **Product categories:** CB radio Accessories --- ### [dipole centre center T shape make your own wire dipole g5rv antenna aerial](https://cbradio.co.uk/product/dipole-centre-center-t-shape-make-your-own-wire-dipole-g5rv-antenna-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔧 **Dipole Centre T Piece – Wire Antenna Centre – G5RV / DIY Dipole – 300 / 450 Ohm Feed** **Build Your Own Antenna • Strong • Versatile** This **T-shape dipole centre** is the perfect component for **building your own wire antenna**, including **G5RV and other dipole designs**. 👉 Ideal for **DIY antenna builders and amateur radio enthusiasts**. --- ### 🔥 **Why Choose This Dipole Centre** ✔ **Strong T-Shape Design** ✔ **Compatible with Ladder Line Feed** ✔ **Ideal for G5RV & Dipole Antennas** ✔ **Simple & Reliable Construction** --- ### ✅ **Key Features** ✔ **T Shape Dipole Centre Piece** ✔ **Supports 300 Ohm Ladder Line** ✔ **Supports 450 Ohm Ladder Line** ✔ **Durable Construction for Outdoor Use** ✔ **Easy to Assemble Your Own Antenna** --- ### 📡 **Perfect For** - G5RV antenna builds - Half wave dipole antennas - HF wire antenna projects - Amateur (Ham) radio setups - Portable or permanent installations --- ### ⚙️ **Specifications** - Type: **Dipole Centre (T Shape)** - Feed Compatibility: **300 / 450 Ohm Ladder Line** - Use: **Wire Dipole / G5RV Antennas** - Installation: **DIY Antenna Construction** --- ### 💡 **Why Use a Proper Dipole Centre** ✔ Keeps antenna balanced ✔ Provides secure connection point ✔ Improves durability ✔ Makes installation cleaner 👉 Essential for a **reliable wire antenna build**. --- ### 🔧 **Typical Setup** - Connect wire elements to each side - Attach ladder line to centre - Mount between supports (trees/masts) 👉 Simple and effective antenna solution. --- ### ⚠️ **Important Notes** ❗ This listing is for the **dipole centre only** ❗ Wire, ladder line, and insulators not included --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Ladder line feed - Wire antenna kits - Insulators & fittings - Coax cable & connectors --- ### 🔥 **Order Today** **Build it your way. Reliable from the centre out.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/dipole-centre-center-t-shape-make-your-own-wire-dipole-g5rv-antenna-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/dipole-centre-center-t-shape-make-your-own-wire-dipole-g5rv-antenna-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/dipole-centre-center-t-shape-make-your-own-wire-dipole-g5rv-antenna-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/dipole-centre-center-t-shape-make-your-own-wire-dipole-g5rv-antenna-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20dipole%20centre%20center%20T%20shape%20make%20your%20own%20wire%20dipole%20g5rv%20antenna%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdipole-centre-center-t-shape-make-your-own-wire-dipole-g5rv-antenna-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/dipole-centre-center-t-shape-make-your-own-wire-dipole-g5rv-antenna-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/dipole-centre-center-t-shape-make-your-own-wire-dipole-g5rv-antenna-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/dipole-centre-center-t-shape-make-your-own-wire-dipole-g5rv-antenna-aerial/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [U Bolts V Bolt Ten Pack 1.75 x M8 for up to 1.5" aerial or antenna mast](https://cbradio.co.uk/product/u-bolts-v-bolt-ten-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **10x V Bolts U Bolts – 38mm Mast Clamp Fixings – Aerial / Satellite / Pole Mount Kit** **Strong Fixings • Trade Quality • Built for Installers** This **pack of 10 V bolts (U bolts)** is designed for **securely mounting aerial masts and poles up to 38mm (1½”) diameter**. 👉 Ideal for **satellite, Freeview, and antenna installations**. --- ### 💪 **Professional Quality** ✔ **Nickel Galvanised Plated** – corrosion resistant ✔ **Heavy Duty Construction** ✔ **Used by Professional Aerial Engineers** ✔ Built for **long-term outdoor use** --- ### ✅ **Key Features** ✔ **Pack of 10 U Bolts** ✔ **Fits Masts up to 38mm (1½”) Diameter** ✔ **Supplied with Nuts** ✔ **Compatible with TK Brackets** ✔ **Strong & Secure Fixing Solution** --- ### 📡 **Perfect For** - TV aerial installations - Satellite dish mounting - Freeview setups - CB / Ham antenna masts - General pole mounting applications --- ### ⚙️ **Specifications** - Type: **V Bolt / U Bolt Clamp** - Quantity: **Pack of 10** - Max Mast Size: **38mm (1½”)** - Finish: **Nickel Galvanised** - Outside Width: **51.2mm (approx.)** - Outside Height: **68mm (approx.)** --- ### 🔧 **Compatibility** ✔ Fits **standard aerial brackets (TK brackets etc.)** ✔ Suitable for **steel or aluminium masts** --- ### 💡 **Why Quality Matters** Cheap fixings: - Rust quickly - Loosen over time - Risk installation failure 👉 These provide: ✔ Strong hold ✔ Weather resistance ✔ Long-term reliability --- ### ⚠️ **Important Notes** ❗ Check mast diameter before purchase ❗ Suitable for outdoor use --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - Mast brackets & clamps - Aerial poles & kits - Coax cable & connectors - Antennas & accessories --- ### 🔥 **Order Today** **Strong fixings. Secure installs. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/u-bolts-v-bolt-ten-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/u-bolts-v-bolt-ten-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/u-bolts-v-bolt-ten-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/u-bolts-v-bolt-ten-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20U%20Bolts%20V%20Bolt%20Ten%20Pack%201.75%20x%20M8%20for%20up%20to%201.5%22%20aerial%20or%20antenna%20mast&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fu-bolts-v-bolt-ten-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/u-bolts-v-bolt-ten-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/u-bolts-v-bolt-ten-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/u-bolts-v-bolt-ten-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast/?share=telegram) - **Product categories:** Installation aid --- ### [Toyota Landcruiser 100 Series Fuel Cap Flap Release Cable](https://cbradio.co.uk/product/toyota-landcruiser-100-series-fuel-cap-flap-release-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Toyota Land Cruiser 100 Series Fuel Flap Release Cable – 4.7 V8 – Genuine Used Part** **Direct Replacement • Genuine Part • Fully Working** This **fuel flap release cable** has been removed from a **Toyota Land Cruiser 100 Series 4.7 V8** and is supplied in **full working order**. 👉 Ideal for repairing a **sticking or broken fuel flap release mechanism**. --- ### ✅ **Key Features** ✔ **Genuine Toyota Part** ✔ **Tested & Working Before Removal** ✔ **Direct Replacement Fit** ✔ **Cost-Effective Alternative to New** --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 100 Series - Engine: **4.7 V8 Petrol** 👉 May fit other variants – please check compatibility --- ### 🔧 **Perfect For** - Broken or snapped fuel flap cable - Stiff or sticking release mechanism - Restoration projects - Spare parts stock --- ### ⚙️ **Specifications** - Part: **Fuel Flap Release Cable** - Vehicle: **Land Cruiser 100 Series** - Engine: **4.7 V8** - Condition: **Used – Removed from working vehicle** --- ### 💡 **Common Fault Symptoms** ✔ Fuel flap won’t open ✔ Lever feels loose or disconnected ✔ Cable snapped or seized 👉 This part solves those issues quickly. --- ### ⚠️ **Important Notes** ❗ Used part – may show minor signs of wear ❗ Ensure compatibility before purchase ❗ Professional fitting recommended if unsure --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Available** 👉 Check our shop for: - Land Cruiser parts - Suspension kits - 4×4 accessories - CB radio & vehicle installs --- ### 🔥 **Order Today** **Fix it properly. Genuine part. Back on the road.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-100-series-fuel-cap-flap-release-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-100-series-fuel-cap-flap-release-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-100-series-fuel-cap-flap-release-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-100-series-fuel-cap-flap-release-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20Landcruiser%20100%20Series%20Fuel%20Cap%20Flap%20Release%20Cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-100-series-fuel-cap-flap-release-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-100-series-fuel-cap-flap-release-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-100-series-fuel-cap-flap-release-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-100-series-fuel-cap-flap-release-cable/?share=telegram) - **Product categories:** Land Cruiser --- ### [Springer 3/8 CB Radio Antenna 100% Stainless Steel Aerial 1.55m SS Orbitor 5'](https://cbradio.co.uk/product/springer-3-8-cb-radio-antenna-100-stainless-steel-aerial-1-55m-ss-orbitor-5/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚛 **100% Stainless Steel Springer CB Antenna – 5ft (1.55m) – 3/8 Mobile Aerial – 27MHz** **Rust-Proof • Heavy Duty • Virtually Indestructible** Take your setup to the next level with this **100% stainless steel Springer CB antenna**—built for **maximum durability and long-term performance**. 👉 Unlike standard versions, this one is **stainless steel from top to bottom** – meaning **no rust, ever**. --- ### 🔥 **Why This Springer Stands Out** ✔ **100% Stainless Steel Construction** ✔ **Will NOT Rust – Ideal for Harsh Conditions** ✔ **Heavy Duty Open Coil Design** ✔ **Pre-Tuned – Ready to Use** ✔ **Virtually Indestructible** --- ### 📡 **Performance Highlights** - Covers full **27–28 MHz CB band** - **Low VSWR (≤ 1.5:1)** for efficient transmission - **High power handling (up to 1000W)** 👉 Built for **strong, consistent communication**. --- ### 🚛 **Perfect For** - Trucks & HGVs - 4×4 & off-road vehicles - Caravans & motorhomes - Agricultural & site vehicles - Coastal or harsh environments *(where rust is an issue)* --- ### ⚙️ **Specifications** - Type: **1/4 Wave Base Loaded Springer Antenna** - Frequency: **27–28 MHz** - Length: **1.55m (5ft)** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 1000 Watts** - Fitting: **Standard 3/8 Thread** - Material: **100% Stainless Steel** - Finish: **Natural Stainless (Self Colour)** --- ### 💡 **Why Stainless Steel Matters** Standard antennas: - Rust over time - Weaken in harsh weather 👉 This antenna: ✔ Corrosion resistant ✔ Longer lifespan ✔ Maintains performance over time --- ### 🔧 **Why Springers Are So Popular** ✔ Flexible whip – absorbs impacts ✔ Strong coil construction ✔ Handles branches & rough use ✔ Trusted by professionals 👉 A proven **workhorse antenna design**. --- ### ⚠️ **Important Notes** ❗ Requires **3/8 mount** ❗ Ensure good grounding for best performance ❗ Height clearance should be considered (5ft antenna) --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - 3/8 mounts & brackets - Coax cable & connectors - SWR meters & tuning tools - CB radios & accessories --- ### 🔥 **Order Today** **No rust. No compromise. Built to last.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) **Get Yours Today!** **Check our shop** **for our** **colour** **range** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/springer-3-8-cb-radio-antenna-100-stainless-steel-aerial-1-55m-ss-orbitor-5/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/springer-3-8-cb-radio-antenna-100-stainless-steel-aerial-1-55m-ss-orbitor-5/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/springer-3-8-cb-radio-antenna-100-stainless-steel-aerial-1-55m-ss-orbitor-5/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/springer-3-8-cb-radio-antenna-100-stainless-steel-aerial-1-55m-ss-orbitor-5/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Springer%203%2F8%20CB%20Radio%20Antenna%20100%25%20Stainless%20Steel%20Aerial%201.55m%20SS%20Orbitor%205%27&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fspringer-3-8-cb-radio-antenna-100-stainless-steel-aerial-1-55m-ss-orbitor-5%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/springer-3-8-cb-radio-antenna-100-stainless-steel-aerial-1-55m-ss-orbitor-5/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/springer-3-8-cb-radio-antenna-100-stainless-steel-aerial-1-55m-ss-orbitor-5/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/springer-3-8-cb-radio-antenna-100-stainless-steel-aerial-1-55m-ss-orbitor-5/?share=telegram) - **Product categories:** Long Stingers --- ### [buddy hook plastic cb ham radio microphone clip mic hanger](https://cbradio.co.uk/product/buddy-hook-plastic-cb-ham-radio-microphone-clip-mic-hanger/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔧 **Buddy Hook CB Mic Hanger – Clip-On Microphone Holder – Quick Grab & Release** **Fast Access • Simple Solution • Safer Driving** The **Buddy Hook mic hanger** is a **clever clip-on solution** that attaches to the back of your CB microphone, allowing you to **pick up and hang your mic instantly**—no fiddling with traditional clips. 👉 Perfect for **drivers who want speed, convenience, and ease of use**. --- ### 🔥 **Why Choose the Buddy Hook** ✔ **Quick Grab & Return** – no messing with clips ✔ **Improves Driving Safety** ✔ **Simple Clip-On Design** ✔ **Lightweight & Durable Plastic** ✔ **Fits Most CB Microphones** --- ### ✅ **Key Features** ✔ **Attaches Directly to Mic** ✔ **Allows Fast Hook & Unhook Operation** ✔ **No Need to Aim for a Clip While Driving** ✔ **Compact & Discreet Design** --- ### 🚛 **Perfect For** - Truck drivers - CB radio users - 4×4 & off-road vehicles - Daily drivers - Anyone using a handheld mic regularly --- ### 💡 **Why You Need This** Standard mic clips: - Awkward to use while driving - Hard to line up quickly - Can be frustrating on the move 👉 Buddy Hook: ✔ Faster ✔ Easier ✔ More practical --- ### ⚙️ **Specifications** - Type: **Clip-On Mic Hanger** - Material: **Durable Plastic** - Fitment: **Universal (most CB mics)** - Installation: **Attaches to mic body** --- ### ⚠️ **Important Notes** ❗ Designed for use with most standard CB microphones ❗ Check fitment depending on mic shape --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB microphones - Mic clips & accessories - CB radios & mounts - Coax & connectors --- ### 🔥 **Order Today** **Grab it. Use it. Hang it instantly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/buddy-hook-plastic-cb-ham-radio-microphone-clip-mic-hanger/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/buddy-hook-plastic-cb-ham-radio-microphone-clip-mic-hanger/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/buddy-hook-plastic-cb-ham-radio-microphone-clip-mic-hanger/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/buddy-hook-plastic-cb-ham-radio-microphone-clip-mic-hanger/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20buddy%20hook%20plastic%20cb%20ham%20radio%20microphone%20clip%20mic%20hanger&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fbuddy-hook-plastic-cb-ham-radio-microphone-clip-mic-hanger%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/buddy-hook-plastic-cb-ham-radio-microphone-clip-mic-hanger/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/buddy-hook-plastic-cb-ham-radio-microphone-clip-mic-hanger/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/buddy-hook-plastic-cb-ham-radio-microphone-clip-mic-hanger/?share=telegram) - **Product categories:** CB radio Accessories --- ### [5 x 12v unfused Cigar Cigarette Lighter Plug Easy Fit CB HAM Radio](https://cbradio.co.uk/product/5-x-12v-unfused-cigar-cigarette-lighter-plug-easy-fit-cb-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌🚗 **5x 12V Cigarette Lighter Plugs – Unfused – Easy Fit – CB / Ham Radio Power Connectors** **Quick Fit • Versatile • Workshop Value Pack** This **pack of 5 unfused 12V cigarette lighter plugs** is ideal for **powering CB radios, ham radio gear, and other 12V devices in vehicles**. 👉 Perfect for **DIY installs, repairs, and custom wiring projects**. --- ### 🔥 **Why Choose This Pack** ✔ **Great Value – Pack of 5** ✔ **Simple DIY Installation** ✔ **Versatile 12V Power Solution** ✔ **Ideal for Multiple Projects or Spares** --- ### ✅ **Key Features** ✔ **5 x 12V Cigarette Lighter Plugs** ✔ **Unfused Design** *(full control over your own fuse setup)* ✔ **Screw Apart Housing for Easy Wiring** ✔ **Solder or Wrap Terminal Connections** ✔ **Suitable for Permanent or Temporary Installs** --- ### 🚗 **Perfect For** - CB radio power leads - Amateur (Ham) radio setups - 12V accessories - Car, van, and truck installations - DIY electrical projects --- ### ⚙️ **Specifications** - Voltage: **12V DC** - Type: **Cigarette Lighter Plug** - Quantity: **Pack of 5** - Fuse: **Unfused** - Connection: **Solder or wrap terminals** --- ### 💡 **Why Unfused Can Be Better** ✔ Allows **custom fuse selection** ✔ Ideal for **dedicated circuits** ✔ More flexibility for installers 👉 Perfect for those who want **full control over their wiring setup**. --- ### 🔧 **Installation Made Easy** 1. Unscrew plug housing 2. Connect wires to terminals (solder or wrap) 3. Reassemble plug 4. Ready to use --- ### ⚠️ **Important Notes** ❗ **No fuse included** – inline fuse recommended ❗ Ensure correct polarity when wiring --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Inline fuse holders - Power cables & connectors - CB & Ham radio accessories - 12V power solutions --- ### 🔥 **Order Today** **Wire it your way. Power it properly. Built for the job.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/5-x-12v-unfused-cigar-cigarette-lighter-plug-easy-fit-cb-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/5-x-12v-unfused-cigar-cigarette-lighter-plug-easy-fit-cb-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/5-x-12v-unfused-cigar-cigarette-lighter-plug-easy-fit-cb-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/5-x-12v-unfused-cigar-cigarette-lighter-plug-easy-fit-cb-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%205%20x%2012v%20unfused%20Cigar%20Cigarette%20Lighter%20%20Plug%20Easy%20Fit%20CB%20HAM%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F5-x-12v-unfused-cigar-cigarette-lighter-plug-easy-fit-cb-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/5-x-12v-unfused-cigar-cigarette-lighter-plug-easy-fit-cb-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/5-x-12v-unfused-cigar-cigarette-lighter-plug-easy-fit-cb-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/5-x-12v-unfused-cigar-cigarette-lighter-plug-easy-fit-cb-ham-radio/?share=telegram) - **Product categories:** Power Connectors --- ### [5 Pin Midi DIN Plug 4 Core Screened Cable Lead 1.2m Heavy Duty Vintage audio](https://cbradio.co.uk/product/5-pin-midi-din-plug-4-core-screened-cable-lead-1-2m-heavy-duty-vintage-audio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎹🔌 **5 Pin DIN MIDI Cable – Heavy Duty 4 Core Screened – Synth / Keyboard / Controller Lead** **Reliable Signal • Noise Free • Built for Musicians** This **high quality 5 pin DIN MIDI cable** is designed for **connecting MIDI-compatible instruments**, delivering **clean, interference-free signal transmission**. 👉 Ideal for **keyboards, synths, drum machines, and MIDI controllers**. --- ### 🔥 **Why Choose This MIDI Cable** ✔ **4 Core Screened Cable** – reduces interference ✔ **Stable MIDI Signal Transmission** ✔ **Durable Construction for Long-Term Use** ✔ **Plug & Play Compatibility** --- ### ✅ **Key Features** ✔ **5 Pin DIN to 5 Pin DIN (Male to Male)** ✔ **High Quality Soundlab Cable** ✔ **4 Core Screened Construction** ✔ **ROHS Compliant** ✔ **Strong, Flexible Outer Jacket** --- ### 🎹 **Perfect For** - Keyboards & synthesizers - MIDI controllers - Drum machines - Audio interfaces - Studio & live setups --- ### ⚙️ **Specifications** - Connector A: **5 Pin DIN Male** - Connector B: **5 Pin DIN Male** - Cable Type: **4 Core Screened** - Signal Type: **MIDI Data** - Compliance: **ROHS** --- ### 💡 **Why Screened Cable Matters** Cheap cables: - Pick up electrical interference - Cause signal dropouts - Lead to unreliable performance 👉 This cable ensures: ✔ Clean signal ✔ Stable MIDI communication ✔ Reliable performance in studio & live environments --- ### ⚠️ **Important Notes** ❗ Designed for **MIDI data only (not audio)** ❗ Ensure your equipment uses **5 pin DIN MIDI ports** --- ### 📦 **Fast UK Dispatch** ✔ In stock for immediate dispatch ✔ Ships from the UK ✔ Secure packaging --- ### 💬 **More Available** 👉 Check our shop for: - Audio & MIDI accessories - Connectors & adaptors - Cables & leads - Studio equipment --- ### 🔥 **Order Today** **Clean signal. Reliable connection. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/5-pin-midi-din-plug-4-core-screened-cable-lead-1-2m-heavy-duty-vintage-audio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/5-pin-midi-din-plug-4-core-screened-cable-lead-1-2m-heavy-duty-vintage-audio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/5-pin-midi-din-plug-4-core-screened-cable-lead-1-2m-heavy-duty-vintage-audio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/5-pin-midi-din-plug-4-core-screened-cable-lead-1-2m-heavy-duty-vintage-audio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%205%20Pin%20Midi%20DIN%20Plug%204%20Core%20Screened%20Cable%20Lead%201.2m%20Heavy%20Duty%20Vintage%20audio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F5-pin-midi-din-plug-4-core-screened-cable-lead-1-2m-heavy-duty-vintage-audio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/5-pin-midi-din-plug-4-core-screened-cable-lead-1-2m-heavy-duty-vintage-audio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/5-pin-midi-din-plug-4-core-screened-cable-lead-1-2m-heavy-duty-vintage-audio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/5-pin-midi-din-plug-4-core-screened-cable-lead-1-2m-heavy-duty-vintage-audio/?share=telegram) - **Product categories:** Other --- ### [CB radio Frequency chart for SUPERSTAR 3900 from SS low to SS High full colour](https://cbradio.co.uk/product/cb-radio-frequency-chart-for-superstar-3900-from-ss-low-to-ss-high-full-colour/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📊 **Laminated CB Radio Frequency Chart – Full Colour – UK FM + A–G Bands – Superstar 3900** **Clear • Durable • Essential Reference** Our **laminated CB radio frequency chart** is one of the **clearest and most detailed charts available**, covering a wide range of CB frequencies including **multi-band A–G layouts and UK FM channels**. 👉 A must-have for **every CB enthusiast and operator**. --- ### 🔥 **Why This Chart Stands Out** ✔ **Extremely Clear Layout – Easy to Read** ✔ **Full Colour Print – Quick Band Identification** ✔ **Wide Frequency Coverage** ✔ **Laminated for Long Life** --- ### 📡 **Coverage Includes** ✔ **25.615 MHz – 28.755 MHz** *(Super Low to Super High)* ✔ **Multi-Band A–G Layouts** *(as used on Superstar 3900)* ✔ **UK FM Channels Clearly Displayed** ✔ **Frequency + Channel Information** 👉 Everything you need in **one easy reference chart**. --- ### 🖨 **High Quality Print** ✔ Printed on **premium quality paper** ✔ Produced using **Xerox ColorQube 8900 printer** ✔ **Full colour laser print** for clarity and durability --- ### 💪 **Laminated for Durability** ✔ Waterproof & wipe clean ✔ Tear resistant ✔ Long-lasting – perfect for shack or mobile use --- ### 📊 **Perfect For** - CB radio enthusiasts - Truckers & mobile operators - Base station setups - Workshops & radio shacks - Beginners learning CB bands --- ### 💡 **Why You Need This** ✔ Quick reference while operating ✔ Avoid channel confusion ✔ Easy band navigation ✔ Improves operating efficiency 👉 Keep it on your **desk, wall, or in your vehicle**. --- ### ⭐ **Customer Confidence** ✔ Trusted by **thousands of satisfied customers** ✔ Clear, practical, and built to last --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Amateur radio band plans - CB radios & accessories - Antennas & mounts - Coax cable & connectors --- ### 🔥 **Order Today** **Clear bands. Quick reference. Essential kit.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-frequency-chart-for-superstar-3900-from-ss-low-to-ss-high-full-colour/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-frequency-chart-for-superstar-3900-from-ss-low-to-ss-high-full-colour/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-frequency-chart-for-superstar-3900-from-ss-low-to-ss-high-full-colour/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-frequency-chart-for-superstar-3900-from-ss-low-to-ss-high-full-colour/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20radio%20Frequency%20chart%20for%20SUPERSTAR%203900%20from%20SS%20low%20to%20SS%20High%20full%20colour&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-frequency-chart-for-superstar-3900-from-ss-low-to-ss-high-full-colour%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-frequency-chart-for-superstar-3900-from-ss-low-to-ss-high-full-colour/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-frequency-chart-for-superstar-3900-from-ss-low-to-ss-high-full-colour/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-frequency-chart-for-superstar-3900-from-ss-low-to-ss-high-full-colour/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [6 Pin Microphone Pug Pack of 3 Mic Plugs HAM or CB Radio](https://cbradio.co.uk/product/6-pin-microphone-pug-pack-of-3-mic-plugs-ham-or-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔌 **3x 6 Pin Microphone Plugs – CB / Ham Radio Mic Connectors – Midland TTi Team** **Essential Spares • Reliable Connection • Workshop Ready** This **economy pack of 3 x 6-pin microphone plugs** is ideal for **repairing, replacing, or building mic leads** for CB and amateur radio equipment. 👉 Perfect for **radio users, installers, and repair workshops**. --- ### ✅ **Key Features** ✔ **Pack of 3 Microphone Plugs** ✔ **6 Pin Configuration** ✔ **Durable Metal Construction** ✔ **Solder Type Connections** ✔ **Excellent Value Multi-Pack** --- ### 📡 **Compatible With** - Midland CB radios - TTi CB radios - Team CB radios 👉 Suitable for most **6 pin microphone radios**. --- ### 📡 **Perfect For** - Microphone repairs - Replacing worn or broken plugs - Custom mic cable builds - Keeping spare parts on hand --- ### ⚙️ **Specifications** - Type: **6 Pin Microphone Plug** - Quantity: **Pack of 3** - Connection: **Solder Type** - Use: **CB & Amateur Radio Microphones** --- ### 💡 **Why Keep Spare Mic Plugs** ✔ Mic leads fail over time ✔ Quick and easy repair solution ✔ Saves replacing full microphones 👉 Stay on air with **minimal downtime**. --- ### ⚠️ **Important Notes** ❗ Ensure your radio uses a **6 pin microphone connection** ❗ Check compatibility before purchase --- ### 🔄 **Other Options Available** 👉 Check our shop for: - 4 pin mic plugs - 5 pin mic plugs - 7 pin mic plugs - 8 pin mic plugs --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Microphones & accessories - CB & Ham radios - Coax cable & connectors - Repair parts & tools --- ### 🔥 **Order Today** **Fix it fast. Stay connected. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/6-pin-microphone-pug-pack-of-3-mic-plugs-ham-or-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/6-pin-microphone-pug-pack-of-3-mic-plugs-ham-or-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/6-pin-microphone-pug-pack-of-3-mic-plugs-ham-or-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/6-pin-microphone-pug-pack-of-3-mic-plugs-ham-or-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%206%20Pin%20Microphone%20Pug%20Pack%20of%203%20Mic%20Plugs%20HAM%20or%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F6-pin-microphone-pug-pack-of-3-mic-plugs-ham-or-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/6-pin-microphone-pug-pack-of-3-mic-plugs-ham-or-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/6-pin-microphone-pug-pack-of-3-mic-plugs-ham-or-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/6-pin-microphone-pug-pack-of-3-mic-plugs-ham-or-cb-radio/?share=telegram) - **Product categories:** Microphone Plugs --- ### [5 Pin Microphone Plugs pack of 3 mic Plugs Amateur or CB Radio](https://cbradio.co.uk/product/5-pin-microphone-plugs-pack-of-3-mic-plug-amateur-or-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔌 **3x 5 Pin Microphone Plugs – CB / Ham Radio Mic Connectors – Replacement Plug Pack** **Reliable Spares • Easy Repairs • Great Value** This **economy pack of 3 x 5-pin microphone plugs** is ideal for **repairing, replacing, or building microphone leads** for CB and amateur radio equipment. 👉 Perfect for **radio users, installers, and workshops**. --- ### ✅ **Key Features** ✔ **Pack of 3 Microphone Plugs** ✔ **5 Pin Configuration** ✔ **Durable Metal Construction** ✔ **Solder Type Connections** ✔ **Ideal Spare Parts Kit** --- ### 📡 **Perfect For** - CB radio microphones - Amateur (Ham) radio setups - Replacing damaged mic plugs - Custom mic cable builds - Workshop spare stock --- ### ⚙️ **Specifications** - Type: **5 Pin Microphone Plug** - Quantity: **Pack of 3** - Connection: **Solder Type** - Use: **CB & Amateur Radio Microphones** --- ### 💡 **Why Keep Spare Mic Plugs** ✔ Mic cables wear out over time ✔ Quick, low-cost repairs ✔ Avoid replacing full microphones 👉 Keep your radio **on air with minimal downtime**. --- ### ⚠️ **Important Notes** ❗ You will receive **5 pin plugs as listed** ❗ **Photo is for illustration only** ❗ Check your radio’s pin configuration before purchase --- ### 🔄 **Other Options Available** 👉 Check our shop for: - 4 pin mic plugs - 6 pin mic plugs - 7 pin mic plugs - 8 pin mic plugs --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Microphones & accessories - CB & Ham radios - Coax cable & connectors - Radio repair parts --- ### 🔥 **Order Today** **Fix it fast. Stay connected. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/5-pin-microphone-plugs-pack-of-3-mic-plug-amateur-or-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/5-pin-microphone-plugs-pack-of-3-mic-plug-amateur-or-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/5-pin-microphone-plugs-pack-of-3-mic-plug-amateur-or-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/5-pin-microphone-plugs-pack-of-3-mic-plug-amateur-or-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%205%20Pin%20Microphone%20Plugs%20pack%20of%203%20mic%20Plugs%20Amateur%20or%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F5-pin-microphone-plugs-pack-of-3-mic-plug-amateur-or-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/5-pin-microphone-plugs-pack-of-3-mic-plug-amateur-or-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/5-pin-microphone-plugs-pack-of-3-mic-plug-amateur-or-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/5-pin-microphone-plugs-pack-of-3-mic-plug-amateur-or-cb-radio/?share=telegram) - **Product categories:** Microphone Plugs --- ### [7 PIN Microphone Plug pack of 3 Mic Plugs Amateur or CB Radio](https://cbradio.co.uk/product/7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔌 **3x 7 Pin Microphone Plugs – CB / Ham Radio Mic Connectors – Replacement Plug Pack** **Essential Spares • Reliable Connection • Great Value** This **economy pack of 3 x 7-pin microphone plugs** is perfect for **repairing, replacing, or building mic leads** for CB and amateur radio equipment. 👉 A must-have for **radio users, installers, and workshops**. --- ### ✅ **Key Features** ✔ **Pack of 3 Microphone Plugs** ✔ **7 Pin Configuration** ✔ **Durable Metal Construction** ✔ **Solder Type Connections** ✔ **Ideal Spare Parts Kit** --- ### 📡 **Perfect For** - CB radio microphones - Amateur (Ham) radio setups - Replacing damaged mic plugs - Custom microphone cable builds - Workshop spare stock --- ### ⚙️ **Specifications** - Type: **7 Pin Microphone Plug** - Quantity: **3 Pack** - Connection: **Solder Type** - Use: **CB & Amateur Radio Microphones** --- ### 💡 **Why Keep Spare Mic Plugs** ✔ Mic cables wear out over time ✔ Quick and easy repairs ✔ Saves replacing full microphones 👉 Keep your radio **on air with minimal downtime**. --- ### ⚠️ **Important Notes** ❗ You will receive **3 x 7 pin plugs as listed** ❗ Ensure compatibility with your radio before purchase --- ### 🔄 **Other Options Available** 👉 Check our shop for: - 4 pin mic plugs - 5 pin mic plugs - 6 pin mic plugs - 8 pin mic plugs --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Microphones & accessories - CB & Ham radios - Coax cable & connectors - Radio repair parts --- ### 🔥 **Order Today** **Fix it fast. Stay connected. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%207%20PIN%20Microphone%20Plug%20pack%20of%203%20Mic%20Plugs%20Amateur%20or%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/7-pin-microphone-plug-pack-of-3-mic-plugs-amateur-or-cb-radio/?share=telegram) - **Product categories:** Microphone Plugs --- ### [sirio new style male n-pl dv27 winkle plug for cb radio antenna aerial dv mounts](https://cbradio.co.uk/product/sirio-new-style-male-n-pl-dv27-winkle-plug-for-cb-radio-antenna-aerial-dv-mounts/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **Sirio DV27 Male Winkle Plug – N-PL DV Connector – New Style DV Mount Plug** **New Style DV Connector • Secure Fit • Sirio Compatible** This **Sirio-style Male DV winkle plug (N-PL DV27)** is designed for the **new generation DV and dome mounts**, where the connector has changed from **female to male fitting**. 👉 Essential for **modern Sirio DV mount installations**. --- ### 🔄 **New vs Old DV Plug** ✔ **New Style (This Listing): Male Plug** ✔ **Old Style: Female Plug** 👉 Make sure you select the **correct version for your mount**. --- ### ✅ **Key Features** ✔ **Male DV Winkle Plug (New Sirio Type)** ✔ **Compatible with DV & Dome Mounts** ✔ **Strong & Reliable Connection** ✔ **Durable Metal Construction** ✔ **Secure Fit for Mobile Installations** --- ### 📡 **Perfect For** - Sirio DV mounts (new type) - Dome mounts - CB radio aerial installations - Mobile antenna systems --- ### 🔧 **Compatibility** ✔ Fits **new style Sirio DV mounts** ✔ Suitable for **DV27 aerial systems** ❗ Not compatible with older female DV mounts --- ### ⚙️ **Specifications** - Type: **DV Winkle Plug (Male – New Style)** - Standard: **N-PL DV27** - Use: **DV / Dome Mount Connection** - Construction: **Metal Body** --- ### 💡 **Why You Need the Correct Plug** Using the wrong type: - Won’t connect properly - Causes poor signal - Leads to unreliable installation 👉 This ensures a **proper, secure connection** with newer mounts. --- ### ⚠️ **Important Notes** ❗ Check your mount type before purchase ❗ Designed for **new style DV systems only** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Available** 👉 Check our shop for: - Old style DV plugs - DV mounts & dome mounts - Coax cable & connectors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Right connector. Proper fit. No hassle.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-new-style-male-n-pl-dv27-winkle-plug-for-cb-radio-antenna-aerial-dv-mounts/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-new-style-male-n-pl-dv27-winkle-plug-for-cb-radio-antenna-aerial-dv-mounts/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-new-style-male-n-pl-dv27-winkle-plug-for-cb-radio-antenna-aerial-dv-mounts/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-new-style-male-n-pl-dv27-winkle-plug-for-cb-radio-antenna-aerial-dv-mounts/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20sirio%20new%20style%20male%20n-pl%20dv27%20winkle%20plug%20for%20cb%20radio%20antenna%20aerial%20dv%20mounts&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-new-style-male-n-pl-dv27-winkle-plug-for-cb-radio-antenna-aerial-dv-mounts%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-new-style-male-n-pl-dv27-winkle-plug-for-cb-radio-antenna-aerial-dv-mounts/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-new-style-male-n-pl-dv27-winkle-plug-for-cb-radio-antenna-aerial-dv-mounts/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-new-style-male-n-pl-dv27-winkle-plug-for-cb-radio-antenna-aerial-dv-mounts/?share=telegram) - **Product categories:** RF Adaptors --- ### [100m reel of rg58 u mil spec cb ham radio 50Ohm coax cable 95% braid](https://cbradio.co.uk/product/100m-reel-of-rg58-u-mil-spec-cb-ham-radio-50ohm-coax-cable-95-braid/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **100m RG58 Coax Cable Reel – MIL Spec 50 Ohm – 95% Braid – CB / Ham / Scanner / CCTV** **Flexible • Reliable • Built for Everyday RF Use** This **100 metre reel of high-quality RG58 coax cable** is ideal for **radio, CCTV, and general RF applications**, offering **excellent flexibility and dependable performance**. 👉 A solid choice for **short to medium cable runs and general installations**. --- ### 💪 **High Quality Construction** ✔ **Tinned Copper Core** – improved durability & corrosion resistance ✔ **95% Woven Copper Braid** – strong shielding ✔ **Solid PE Dielectric** – stable signal performance ✔ **Flexible PVC Outer Jacket** 👉 Designed for **long-term reliability**. --- ### ✅ **Key Features** ✔ **100 Metre Reel** ✔ **50 Ohm Impedance** ✔ **MIL-SPEC Style Construction** ✔ **Highly Flexible & Easy to Route** ✔ **Suitable for Multiple Applications** --- ### 📡 **Perfect For** - CB Radio installations - Amateur (Ham) radio - Scanner setups - CCTV systems - General RF and signal use --- ### ⚙️ **Specifications** - Cable Type: **RG58** - Length: **100 Metres** - Impedance: **50 Ohm** - Inner Conductor: **19 x 0.18mm Tinned Copper** - Dielectric: **2.95mm Solid PE** - Shielding: **95% Tinned Copper Braid** - Outer Jacket: **4.95mm PVC** --- ### 💡 **Why Tinned Copper Matters** ✔ Up to **10x longer lifespan** ✔ Excellent **corrosion resistance** ✔ Ideal for **outdoor & marine environments** ✔ Maintains **consistent conductivity** 👉 Perfect for **aerial and radio systems**. --- ### ⚠️ **Important Notes** ❗ Supplied as **cable only (no connectors)** ❗ Best suited for **short to medium runs** *(for longer runs consider RG8X or RG213)* --- ### 📦 **Other Options Available** 👉 Check our shop for: - 10m & 20m pre-made leads - RG8X (Mini8) low loss cable - RG213 heavy duty cable - Connectors & adaptors --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready for installation --- ### ⭐ **Why Buy From Us** ✔ Trusted by thousands of customers ✔ Quality components ✔ Fast dispatch ✔ Knowledgeable support --- ### 🔥 **Order Today** **Flexible. Reliable. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/100m-reel-of-rg58-u-mil-spec-cb-ham-radio-50ohm-coax-cable-95-braid/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/100m-reel-of-rg58-u-mil-spec-cb-ham-radio-50ohm-coax-cable-95-braid/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/100m-reel-of-rg58-u-mil-spec-cb-ham-radio-50ohm-coax-cable-95-braid/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/100m-reel-of-rg58-u-mil-spec-cb-ham-radio-50ohm-coax-cable-95-braid/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20100m%20reel%20of%20rg58%20u%20mil%20spec%20cb%20ham%20radio%2050Ohm%20coax%20cable%2095%25%20braid&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F100m-reel-of-rg58-u-mil-spec-cb-ham-radio-50ohm-coax-cable-95-braid%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/100m-reel-of-rg58-u-mil-spec-cb-ham-radio-50ohm-coax-cable-95-braid/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/100m-reel-of-rg58-u-mil-spec-cb-ham-radio-50ohm-coax-cable-95-braid/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/100m-reel-of-rg58-u-mil-spec-cb-ham-radio-50ohm-coax-cable-95-braid/?share=telegram) - **Product categories:** RG58 --- ### [MRQ-750 Dual Band 2M 70CM super gainer Amateur Mobile Whip Antenna VHF UHF](https://cbradio.co.uk/product/mrq-750-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **MRQ750 Dual Band Super Gainer Antenna – 2m / 70cm – High Gain 144/430MHz – 1.5m PL259** **Maximum Gain • Long Range • Serious Performance** The **MRQ750 Super Gainer** is a **high-performance dual band mobile antenna**, designed for **maximum range on both 2m and 70cm bands**. 👉 Featuring a **double centre-loaded design**, this aerial delivers **exceptional signal strength for demanding users**. --- ### 🔥 **Why Choose the MRQ750** ✔ **Very High Gain Performance** ✔ **Double Centre Load Design** – improved efficiency ✔ **Full Size 1.5m Antenna for Maximum Range** ✔ **Durable Stainless Steel Construction** ✔ **Low VSWR for Efficient Transmission** --- ### 📡 **Performance Highlights** - **144–146 MHz (2m band)** - **430–440 MHz (70cm band)** - Gain: - **5.5 dBd (2m)** - **8.0 dBd (70cm)** - **VSWR ≤ 1.5:1** 👉 Built for **long-distance communication and strong signal clarity**. --- ### 🚗 **Perfect For** - Amateur (Ham) radio operators - Long-distance mobile communication - High-performance vehicle installs - Base-to-mobile setups --- ### ⚙️ **Specifications** - Model: **MRQ750 Super Gainer** - Type: **Dual Band Mobile Antenna** - Design: - **2m: 6/8 Wave** - **70cm: 3 x 5/8 Wave** - Frequency: **144–146 / 430–440 MHz** - Gain: **5.5 dBd / 8.0 dBd** - Length: **1.5 Metres** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 200 Watts** - Fitting: **PL259 (UHF Male)** --- ### 💡 **Why This Antenna Stands Out** Compared to smaller dual band antennas: - Higher gain = greater range - Better performance in weak signal areas - Ideal for serious radio users 👉 A **top-tier choice for maximum performance**. --- ### ⚠️ **Important Notes** ❗ Requires suitable mount with **SO239 socket** ❗ Height may not suit all vehicles (check clearance) ❗ Best performance with proper grounding --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Heavy duty mounts - Coax cable & connectors - Dual band radios - SWR meters & tuning tools --- ### 🔥 **Order Today** **Big antenna. Big gain. Big performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mrq-750-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mrq-750-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mrq-750-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mrq-750-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MRQ-750%20Dual%20Band%202M%2070CM%20super%20gainer%20Amateur%20Mobile%20Whip%20Antenna%20VHF%20UHF&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmrq-750-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mrq-750-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mrq-750-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mrq-750-dual-band-2m-70cm-super-gainer-amateur-mobile-whip-antenna-vhf-uhf/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [MRQ-500 dual band 2M 70cm closed coil mobile ham antenna 145 430 MHz](https://cbradio.co.uk/product/mrq-500-dual-band-2m-70cm-closed-coil-mobile-ham-antenna-145-430-mhz-2/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **MRQ500 Dual Band Mobile Antenna – 2m / 70cm – High Gain VHF/UHF Aerial – PL259** **High Performance • Slim Design • Serious Value** The **MRQ500 Dual Band antenna** delivers **excellent performance on both 2m and 70cm bands**, offering **strong signal gain and reliability**—comparable to top-tier brands at a fraction of the price. 👉 A perfect upgrade for **mobile amateur radio setups**. --- ### 🔥 **Why Choose the MRQ500** ✔ **Dual Band Operation (2m & 70cm)** ✔ **High Gain Performance** ✔ **Slim Centre Loading Coil Design** ✔ **Durable Stainless Steel Whip** ✔ **Outstanding Value for Money** --- ### 📡 **Performance Highlights** - **144–146 MHz (2m band)** - **430–440 MHz (70cm band)** - Gain: - **3.2 dBd (2m)** - **5.8 dBd (70cm)** - **Low VSWR (≤ 1.5:1)** 👉 Designed for **clear, extended communication range**. --- ### 🚗 **Perfect For** - Amateur (Ham) radio users - Mobile installations (cars, vans, 4×4) - Daily driving & long-distance comms - Base-to-mobile communication --- ### ⚙️ **Specifications** - Model: **MRQ500 Dual Band Antenna** - Type: **Dual Band Mobile Antenna** - Design: - **1/2 Wave (2m)** - **2 x 5/8 Wave (70cm)** - Frequency: **144–146 / 430–440 MHz** - Gain: **3.2 dBd / 5.8 dBd** - Length: **95 cm** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 200 Watts** - Fitting: **PL259 (UHF Male)** --- ### 💡 **Why This Antenna Stands Out** ✔ Comparable to premium Japanese brands ✔ Excellent balance of size vs performance ✔ Strong build quality for daily use 👉 **High-end performance without the high-end price**. --- ### ⚠️ **Important Notes** ❗ Ensure compatible mount (SO239 socket required) ❗ Best performance with proper grounding and positioning --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mounts & brackets - Coax cable & connectors - Dual band radios - SWR meters & tuning tools --- ### 🔥 **Order Today** **Dual band power. Strong signal. Great value.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mrq-500-dual-band-2m-70cm-closed-coil-mobile-ham-antenna-145-430-mhz-2/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mrq-500-dual-band-2m-70cm-closed-coil-mobile-ham-antenna-145-430-mhz-2/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mrq-500-dual-band-2m-70cm-closed-coil-mobile-ham-antenna-145-430-mhz-2/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mrq-500-dual-band-2m-70cm-closed-coil-mobile-ham-antenna-145-430-mhz-2/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MRQ-500%20dual%20band%202M%2070cm%20closed%20coil%20mobile%20ham%20antenna%20145%20430%20MHz&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmrq-500-dual-band-2m-70cm-closed-coil-mobile-ham-antenna-145-430-mhz-2%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mrq-500-dual-band-2m-70cm-closed-coil-mobile-ham-antenna-145-430-mhz-2/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mrq-500-dual-band-2m-70cm-closed-coil-mobile-ham-antenna-145-430-mhz-2/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mrq-500-dual-band-2m-70cm-closed-coil-mobile-ham-antenna-145-430-mhz-2/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Half 1/2 size G5RV PVC coated superior thick copper flex weave](https://cbradio.co.uk/product/half-1-2-size-g5rv-pvc-coated-superior-thick-copper-flex-weave/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🏡 **Half Size G5RV Multi-Band Antenna – 40–10m HF Wire Aerial – 51ft – UK Made** **Strong • Multi-Band • Proven Performance** This **half-size G5RV wire antenna** is a **high-quality multi-band HF aerial**, designed for **reliable performance across 40–10 metre bands**. 👉 Built using **thick PVC coated copper flex weave** for **strength, durability, and long life**. --- ### 📜 **A Proven Classic Design** The G5RV antenna, developed by Louis Varney (G5RV), is one of the **most widely used wire antennas worldwide**, trusted by amateur radio operators for decades. --- ### 💪 **Superior Build Quality** ✔ **Thick Poly-Weave Copper Elements** – extra strength ✔ **PVC Coated Wire** – weather resistant ✔ **Quality 300 Ohm Ladder Line** ✔ **Heavy Duty Construction** – built to last 👉 Designed for **long-term outdoor use**. --- ### ✅ **Key Features** ✔ **Half Size G5RV (Approx. 51–53 ft total length)** ✔ **Covers 40m to 10m Bands (7–30 MHz)** ✔ **Best Installed as Inverted V** ✔ **SO239 Feed Point Connection** ✔ **Complete Kit – Ready to Install** ✔ **Made in Great Britain 🇬🇧** --- ### 📡 **Performance** - Frequency Range: **7 – 30 MHz** - Bands: **40m, 20m, 15m, 10m** - Balanced multi-band performance - Ideal for **HF base station setups** --- ### 🔧 **What’s Included** ✔ **2 x 26ft Poly-Weave Copper Elements** ✔ **300 Ohm Ladder Ribbon Cable** ✔ **SO239 Feed Connection** ✔ **2 x Dog Bone Insulators** ✔ **Instruction Sheet** --- ### 🏡 **Installation Options** ✔ Inverted V (recommended) ✔ Flat top between supports ✔ Garden, field, or portable setups --- ### 💡 **Why Choose This G5RV** Cheap wire antennas: - Stretch or snap - Corrode quickly - Perform poorly over time 👉 This version offers **strength, reliability, and consistent performance**. --- ### ⚠️ **Important Notes** ❗ Requires suitable support (mast/trees) ❗ Best results with proper installation height ❗ ATU may be required depending on band --- ### 📦 **Other Options Available** 👉 Check our shop for: - **Full size G5RV antenna** - Coax cable & connectors - Masts & mounting solutions --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 🔥 **Order Today** **Classic design. Modern build. Reliable performance.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/half-1-2-size-g5rv-pvc-coated-superior-thick-copper-flex-weave/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/half-1-2-size-g5rv-pvc-coated-superior-thick-copper-flex-weave/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/half-1-2-size-g5rv-pvc-coated-superior-thick-copper-flex-weave/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/half-1-2-size-g5rv-pvc-coated-superior-thick-copper-flex-weave/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Half%201%2F2%20size%20G5RV%20PVC%20coated%20superior%20thick%20copper%20flex%20weave&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhalf-1-2-size-g5rv-pvc-coated-superior-thick-copper-flex-weave%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/half-1-2-size-g5rv-pvc-coated-superior-thick-copper-flex-weave/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/half-1-2-size-g5rv-pvc-coated-superior-thick-copper-flex-weave/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/half-1-2-size-g5rv-pvc-coated-superior-thick-copper-flex-weave/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [wireless weather station Moonraker WS-200 Pro Solar](https://cbradio.co.uk/product/wireless-weather-station-moonraker-ws-200-pro-solar/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🌦️📡 **Moonraker WS200 Pro Wireless Weather Station – Solar Sensor – Wind Rain Temp Humidity** **Professional Monitoring • Solar Powered Sensor • Wireless Display** The **Moonraker WS200 Pro Weather Station** is a **feature-packed wireless weather station**, designed to give you **accurate real-time environmental data** from your home or outdoor location. 👉 Ideal for **gardeners, farmers, outdoor enthusiasts, and weather monitoring setups**. --- ### ☀️ **Solar Powered Outdoor Sensor** ✔ Built-in **solar panel** extends battery life ✔ Low maintenance operation ✔ Reliable long-term performance --- ### 📡 **Wireless Performance** ✔ **433MHz transmission** ✔ Up to **100m range (open field)** ✔ Stable and consistent data transfer --- ### 🌍 **Comprehensive Weather Monitoring** ✔ Indoor & Outdoor **Temperature** ✔ Indoor & Outdoor **Humidity** ✔ **Wind Speed & Direction (8 sectors)** ✔ **Rainfall & History Tracking** ✔ **Time, Date & Day (DCF Radio Controlled)** ✔ Weather **alarm limits** --- ### 📊 **Outdoor Sensor Specifications** - Temperature Range: **-40°C to +65°C** - Accuracy: **±1°C** - Humidity Range: **10% – 99% (±5%)** - Rainfall: **0 – 9999mm** - Wind Speed: **0 – 180 km/h (0–110 mph)** - Waterproof Rating: **IPX3** - Update Interval: **48 seconds** --- ### 🏠 **Indoor Unit Features** ✔ Clear display of all weather data ✔ Temperature & humidity monitoring ✔ DCF radio-controlled clock ✔ Alarm function for weather limits **Indoor Specs:** - Temperature Range: **-9.9°C to +60°C** - Humidity Range: **1% – 99%** - Update Interval: **30 seconds** --- ### 🔋 **Power Requirements** ❗ Indoor unit requires **3 x AA batteries (not included)** --- ### 🌿 **Perfect For** - Home weather monitoring - Farms & agricultural use - Garden & greenhouse tracking - Outdoor hobbyists - Caravan & rural setups --- ### 💡 **Why Choose the WS200 Pro** ✔ Solar-assisted outdoor unit ✔ Wide range of weather data ✔ Long wireless range ✔ Easy-to-read display 👉 A **complete weather monitoring solution**. --- ### ⚠️ **Important Notes** ❗ Batteries not included ❗ Max range depends on environment --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to set up --- ### 💬 **More Available** 👉 Check our shop for: - CB radios & accessories - Antennas & mounts - Outdoor equipment - Power solutions --- ### 🔥 **Order Today** **Track it. Monitor it. Stay ahead of the weather.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/wireless-weather-station-moonraker-ws-200-pro-solar/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/wireless-weather-station-moonraker-ws-200-pro-solar/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/wireless-weather-station-moonraker-ws-200-pro-solar/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/wireless-weather-station-moonraker-ws-200-pro-solar/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20wireless%20weather%20station%20Moonraker%20WS-200%20Pro%20Solar&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fwireless-weather-station-moonraker-ws-200-pro-solar%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/wireless-weather-station-moonraker-ws-200-pro-solar/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/wireless-weather-station-moonraker-ws-200-pro-solar/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/wireless-weather-station-moonraker-ws-200-pro-solar/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [Scart Lead to 3 RCA Phono Audio Video Cable With Switch 1.5M](https://cbradio.co.uk/product/scart-lead-to-3-rca-phono-audio-video-cable-with-switch-1-5m/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎮📺 **SCART to 3x RCA Phono Cable 1.5m – IN/OUT Switch – Composite AV Lead – TV / Retro Gaming** **Versatile AV Connection • Bi-Directional • Plug & Play** This **SCART to 3x RCA phono cable** lets you connect **modern and retro AV equipment**, with a **built-in IN/OUT switch** for maximum flexibility. 👉 Easily switch between **SCART → RCA (OUT)** or **RCA → SCART (IN)**. --- ### 🔥 **Why This Cable Stands Out** ✔ **IN/OUT Switch Built-In** – one cable, two functions ✔ **Works Both Ways** – no need for separate leads ✔ **Ideal for Retro & Modern Equipment** ✔ **Ready to Use – No Setup Required** --- ### ✅ **Key Features** ✔ **1.5 Metre Flexible Screened Cable** ✔ **21 Pin SCART Connector** ✔ **3 x RCA Phono Plugs (Red / White / Yellow)** ✔ **Stereo Audio + Composite Video** ✔ **Signal Direction Switch (IN / OUT)** ✔ **Supplied Brand New in Retail Packaging** --- ### 📺 **Perfect For** - TVs, VCRs, DVD players - Freeview boxes - Retro gaming consoles - Video capture cards - Camcorders - AV converters --- ### 🎮 **Common Uses** 👉 Connect retro consoles to TV 👉 Send video from SCART device to capture card 👉 Connect DVD/VCR to older or newer displays 👉 Convert between AV formats easily --- ### ⚙️ **Specifications** - Length: **1.5 Metres** - Connector A: **21 Pin SCART** - Connector B: **3 x RCA Phono (Composite + Stereo Audio)** - Signal: **Composite Video + Stereo Audio** - Direction: **Switchable IN / OUT** --- ### 💡 **Why You Need the IN/OUT Switch** Standard cables: - Only work one way - Cause confusion 👉 This cable: ✔ Works both directions ✔ Saves buying multiple leads ✔ Adds flexibility to your setup --- ### ⚠️ **Important Notes** ❗ Ensure switch is set correctly (**IN or OUT**) ❗ Composite signal only (not HDMI / HD) --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - AV adaptors & converters - HDMI & RCA accessories - TV aerial cables - Retro gaming leads --- ### 🔥 **Order Today** **One cable. Two directions. Total flexibility.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/scart-lead-to-3-rca-phono-audio-video-cable-with-switch-1-5m/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/scart-lead-to-3-rca-phono-audio-video-cable-with-switch-1-5m/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/scart-lead-to-3-rca-phono-audio-video-cable-with-switch-1-5m/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/scart-lead-to-3-rca-phono-audio-video-cable-with-switch-1-5m/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Scart%20Lead%20to%203%20RCA%20Phono%20Audio%20Video%20Cable%20With%20Switch%201.5M&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fscart-lead-to-3-rca-phono-audio-video-cable-with-switch-1-5m%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/scart-lead-to-3-rca-phono-audio-video-cable-with-switch-1-5m/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/scart-lead-to-3-rca-phono-audio-video-cable-with-switch-1-5m/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/scart-lead-to-3-rca-phono-audio-video-cable-with-switch-1-5m/?share=telegram) - **Product categories:** Clearance --- ### [PNI Escort HP 62 Handheld CB Radio 40 UK 40 EU](https://cbradio.co.uk/product/handheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🎙 **PNI Escort 62 Multi Handheld CB Radio – Portable 40/80CH – EU Bands – 4W FM** **Compact • Multi-Band • Take CB Anywhere** The **PNI Escort 62 CB Radio** is a **compact handheld CB transceiver**, designed for **portable use with full European band support**. 👉 Perfect for **on-the-go communication, events, off-road use, and backup radios**. --- ### 🔥 **Why Choose the PNI Escort 62** ✔ **Ultra Compact & Lightweight** ✔ **Multi-Band EU Coverage** ✔ **Portable CB Operation Anywhere** ✔ **Low Power Consumption (Battery Save Mode)** ✔ **Clear Display with Backlight** --- ### ✅ **Key Features** ✔ **40 / 80 Channels (Multi Standard EU Bands)** ✔ **4W Output Power (AM/FM)** ✔ **PLL Synthesizer for Stable Operation** ✔ **Automatic Battery Save Function** ✔ **Backlit Display for Night Use** ✔ **External Microphone Input** --- ### 📡 **Performance Highlights** - Frequency Range: **25.615 – 30.105 MHz** - Sensitivity: - **0.25µV (FM)** - **0.5µV (AM)** - Selectivity: **>60 dB** - Harmonic Suppression: **>70 dB** 👉 Strong performance for a **portable CB unit**. --- ### 🎒 **Perfect For** - Off-road & 4×4 users - Event coordination - Backup CB radio - Field work & site use - Caravan & outdoor use --- ### ⚙️ **Technical Specifications** - Model: **PNI Escort 62 Multi** - Channels: **40 / 80 (band dependent)** - Modes: **AM / FM** - Output Power: **4W** - Antenna Impedance: **50 Ohm** - Speaker: **0.5W (8 Ohm)** - Power Supply: **7.2V / 12V nominal** - Size: **30 x 70 x 140 mm** - Weight: **220g (without batteries)** --- ### 🔋 **Battery Information** ❗ Runs on **AA batteries only** ❗ Supplied with **refillable battery case** ❗ **No charger or car adapter included** 👉 Simple and flexible portable power setup. --- ### 💡 **Why Go Handheld CB** ✔ Use anywhere – no vehicle install required ✔ Ideal as backup radio ✔ Perfect for temporary setups 👉 A **versatile addition to any radio setup**. --- ### ⚠️ **Important Notes** ❗ Requires AA batteries (not included) ❗ No charger or vehicle adapter included ❗ Check legal use in your region if operating abroad --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB antennas & adaptors - External microphones - Battery accessories - Mobile CB radios --- ### 🔥 **Order Today** **Portable. Practical. Ready when you are.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/handheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/handheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/handheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/handheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%2062%20Handheld%20CB%20Radio%2040%20UK%2040%20EU&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhandheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/handheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/handheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/handheld-cb-radio-moonraker-major-42-multi-standard-fm-40-uk-40-eu/?share=telegram) - **Product categories:** PNI --- ### [Superflexi 48" Super Flexible CB radio aerial Mobile Antenna](https://cbradio.co.uk/product/superflexi-48-super-flexible-cb-radio-aerial-mobile-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **Superflexi 48″ CB Antenna – Super Flexible Mobile Aerial – 3/8 Thread – 27MHz** **Ultra Flexible • Tough Design • Great Performance** The **Superflexi 48″ CB antenna** is a **highly flexible helical-loaded aerial**, offering **excellent durability with strong performance**, similar to a firestick but with **far greater flexibility**. 👉 Perfect for **off-road, agricultural, and heavy-use vehicles**. --- ### 💪 **Why Choose the Superflexi** ✔ **Super Flexible Design** – bends without damage ✔ **Durable Construction** – built for tough environments ✔ **Helical Loaded for Strong Performance** ✔ **Pre-Tuned – Ready to Use** ✔ **Handles Rough Terrain with Ease** --- ### 📡 **Performance Highlights** - Covers full **27–28 MHz CB band** - **Low VSWR (≤ 1.5:1)** for efficient transmission - Performance comparable to **firestick-style antennas** 👉 Great balance of **durability and signal output**. --- ### 🚜 **Perfect For** - 4×4 & off-road vehicles - Tractors & agricultural machinery - Trucks & vans - Forestry & site vehicles - Environments where antennas take abuse --- ### ⚙️ **Specifications** - Model: **Superflexi 48″ Antenna** - Type: **Helical Loaded CB Antenna** - Frequency: **27–28 MHz** - Length: **122 cm (48″)** - VSWR: **≤ 1.5:1** - Power Handling: **Up to 200 Watts** - Fitting: **Standard 3/8 Thread** --- ### 💡 **Why Go Flexible** Rigid antennas: - Snap or bend permanently - Struggle in off-road conditions 👉 Superflexi: ✔ Bends and returns to shape ✔ Survives branches & impacts ✔ Ideal for harsh environments --- ### ⚠️ **Important Notes** ❗ Requires **3/8 mount** ❗ Best performance with good grounding ❗ Slightly less rigid than steel whip antennas --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - 3/8 mounts & brackets - Coax cable & connectors - SWR meters & tuning tools - CB radios & accessories --- ### 🔥 **Order Today** **Bend it. Use it. Keep talking. Built for real conditions.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/superflexi-48-super-flexible-cb-radio-aerial-mobile-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/superflexi-48-super-flexible-cb-radio-aerial-mobile-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/superflexi-48-super-flexible-cb-radio-aerial-mobile-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/superflexi-48-super-flexible-cb-radio-aerial-mobile-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Superflexi%2048%22%20Super%20Flexible%20CB%20radio%20aerial%20Mobile%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsuperflexi-48-super-flexible-cb-radio-aerial-mobile-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/superflexi-48-super-flexible-cb-radio-aerial-mobile-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/superflexi-48-super-flexible-cb-radio-aerial-mobile-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/superflexi-48-super-flexible-cb-radio-aerial-mobile-antenna/?share=telegram) - **Product categories:** Modulators --- ### [2" inch suspension lift kit for Toyota LandCruiser HDJ FZj 80 Foam Cell Shocks](https://cbradio.co.uk/product/2-inch-suspension-lift-kit-for-toyota-landcruiser-hdj-fzj-80-foam-cell-shocks/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **2″ Lift Kit – Toyota Land Cruiser 80 Series – Pedders Suspension – +50mm TrakRyder Kit** **Improved Ground Clearance • Better Stance • Proven Performance** Upgrade your **Toyota Land Cruiser 80 Series** with this **Pedders 2 inch (50mm) lift kit**, designed to improve **off-road capability, handling, and appearance**. 👉 A complete suspension upgrade using **Pedders TrakRyder components**. --- ### ⚠️ **IMPORTANT – PLEASE READ** 📞 **PLEASE RING FIRST TO CHECK STOCK BEFORE PURCHASING** --- ### 🔥 **Why Choose This Lift Kit** ✔ **Approx. +50mm (2″) Lift** ✔ **Improved Ground Clearance** ✔ **Better Off-Road Capability** ✔ **Enhanced Vehicle Stance** ✔ **Allows Larger Tyres** --- ### ✅ **Complete Kit Includes** ✔ **Front Shocks (Pedders TrakRyder) x2** ✔ **Rear Shocks (Pedders TrakRyder) x2** ✔ **Front Coil Springs x2** ✔ **Rear Coil Springs x2** ✔ **Rubber Castor Correction Bush Kit** 👉 Everything needed for a **proper suspension upgrade**. --- ### 🚗 **Vehicle Compatibility** - Toyota Land Cruiser 80 Series 👉 Designed for **standard vehicles** 👉 Additional weight (winch, bull bar etc.) may require different springs --- ### 📏 **Lift & Height Information** - **Lift Height:** Approx. **+50mm (2″)** - **Front Height:** ~780mm (with 16″ wheels) - **Rear Height:** ~800mm (with 16″ wheels) ❗ Final height may vary depending on vehicle setup --- ### 💡 **Performance Benefits** ✔ Improved approach & departure angles ✔ Better handling on rough terrain ✔ Increased load carrying capability ✔ More aggressive off-road stance --- ### 🛠 **Installation Notes** ✔ Direct replacement for factory components ✔ No major modifications required ✔ **Wheel alignment recommended after fitting** --- ### ⚠️ **Usage Advice** 👉 For heavy off-road use: Consider upgrading to **Foam Cell shock versions** 👉 For standard ride height: We also offer **non-lift kits** – see our shop --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Expert support available --- ### ⭐ **Why Buy From Us** ✔ Suspension specialists ✔ Proven Pedders products ✔ Expert advice available ✔ Quality components you can trust --- ### 💬 **More Available** 👉 Check our shop for: - Standard height kits - Heavy duty lift kits - Bush kits & accessories - Land Cruiser upgrades --- ### 🔥 **Order Today** **Lift it. Strengthen it. Take it further.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-inch-suspension-lift-kit-for-toyota-landcruiser-hdj-fzj-80-foam-cell-shocks/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-inch-suspension-lift-kit-for-toyota-landcruiser-hdj-fzj-80-foam-cell-shocks/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-inch-suspension-lift-kit-for-toyota-landcruiser-hdj-fzj-80-foam-cell-shocks/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-inch-suspension-lift-kit-for-toyota-landcruiser-hdj-fzj-80-foam-cell-shocks/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%22%20inch%20suspension%20lift%20kit%20for%20Toyota%20LandCruiser%20HDJ%20FZj%2080%20Foam%20Cell%20Shocks&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-inch-suspension-lift-kit-for-toyota-landcruiser-hdj-fzj-80-foam-cell-shocks%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-inch-suspension-lift-kit-for-toyota-landcruiser-hdj-fzj-80-foam-cell-shocks/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-inch-suspension-lift-kit-for-toyota-landcruiser-hdj-fzj-80-foam-cell-shocks/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-inch-suspension-lift-kit-for-toyota-landcruiser-hdj-fzj-80-foam-cell-shocks/?share=telegram) - **Product categories:** Land Cruiser --- ### [Universal CB radio car stereo single DIN fascia under dash mount CD stereo tray](https://cbradio.co.uk/product/universal-cb-radio-car-stereo-single-din-fascia-under-dash-mount-cd-stereo-tray/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚗🔧 **Universal Single DIN Under Dash Mount Tray – CB Radio / Car Stereo Fascia Holder** **Add a DIN Slot Anywhere – Clean & Practical Install** This **universal single DIN under-dash mount tray** allows you to install a **CB radio or car stereo** in vehicles that **don’t have a factory DIN slot**. 👉 Perfect for **older vehicles, classic builds, and custom installs**. --- ### ✅ **Key Features** ✔ **Universal Single DIN Size** ✔ **Under Dash Mounting** – no need for factory slot ✔ **Ideal for CB Radios & Car Stereos** ✔ **Neat & Professional Installation** ✔ **Strong, Durable Construction** --- ### 🚙 **Perfect For** - Older vehicles without DIN slots - Classic cars & restorations - Land Rover builds - VW vans & campers - Custom installations --- ### 📡 **Compatible With** - CB radios using DIN mounts - Standard single DIN car stereos - CD players & head units --- ### 🔧 **Why You Need This** Without a DIN slot: - Installation is messy - Radios are hard to mount - Limited placement options 👉 This tray provides a **simple, clean mounting solution**. --- ### ⚙️ **Specifications** - Type: **Single DIN Under Dash Mount Tray** - Fitment: **Universal** - Mounting: **Under dash / surface mount** - Compatibility: **CB radios & DIN stereos** --- ### 💡 **Installation Benefits** ✔ Adds a DIN slot where none exists ✔ Keeps your dash uncluttered ✔ Ideal for hidden or secondary installs --- ### ⚠️ **Important Notes** ❗ Designed for **single DIN units only** ❗ Check available space before installation ❗ Radio / stereo not included --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - DIN mounts & adaptors - CB radios & accessories - External speakers - Wiring & connectors --- ### 🔥 **Order Today** **No DIN slot? No problem. Fit it properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/universal-cb-radio-car-stereo-single-din-fascia-under-dash-mount-cd-stereo-tray/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/universal-cb-radio-car-stereo-single-din-fascia-under-dash-mount-cd-stereo-tray/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/universal-cb-radio-car-stereo-single-din-fascia-under-dash-mount-cd-stereo-tray/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/universal-cb-radio-car-stereo-single-din-fascia-under-dash-mount-cd-stereo-tray/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Universal%20CB%20radio%20car%20stereo%20single%20DIN%20fascia%20under%20dash%20mount%20CD%20stereo%20tray&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Funiversal-cb-radio-car-stereo-single-din-fascia-under-dash-mount-cd-stereo-tray%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/universal-cb-radio-car-stereo-single-din-fascia-under-dash-mount-cd-stereo-tray/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/universal-cb-radio-car-stereo-single-din-fascia-under-dash-mount-cd-stereo-tray/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/universal-cb-radio-car-stereo-single-din-fascia-under-dash-mount-cd-stereo-tray/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [MRQ-550 Dual Band 2M 70CM Super Gainer Amateur Mobile Aerial Antenna VHF UHF](https://cbradio.co.uk/product/mrq-550-dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **MRQ-550 Dual Band Mobile Antenna – 2m / 70cm – 144/430MHz – High Gain VHF/UHF Aerial** **Powerful Dual Band Performance • Slim Design • Built for Range** The **MRQ-550 Dual Band mobile antenna** delivers **excellent performance on both 2m and 70cm bands**, making it ideal for **amateur radio users who want strong, reliable communication**. 👉 Designed for **mobile use with high gain and low SWR**. --- ### 🔥 **Why Choose the MRQ-550** ✔ **Dual Band Operation (2m / 70cm)** ✔ **High Gain Performance** – improved signal strength ✔ **Low VSWR (<1.5:1)** – efficient transmission ✔ **Slim & Durable Design** ✔ **Radial-Less Construction** --- ### 📡 **Performance Highlights** - **144 MHz (2m band):** 3.5 dB gain - **430 MHz (70cm band):** 6.0 dB gain - **Excellent TX & RX performance** 👉 Ideal for **clear long-distance communication**. --- ### 🚗 **Perfect For** - Amateur (Ham) radio users - Mobile installations (cars, vans, 4×4) - Daily commuting & long-distance travel - Base-to-mobile communication --- ### ⚙️ **Specifications** - Model: **MRQ-550** - Frequency: **144 / 430 MHz (2m / 70cm)** - Length: **1.06 Metres** - Weight: **330g** - Gain: - **3.5 dB @ 144 MHz** - **6.0 dB @ 430 MHz** - Power Handling: **150W (FM Total)** - Impedance: **50 Ohms** - VSWR: **< 1.5:1** - Connector: **MP (Motorola Type)** - Design: - **1/2 Wave C-Load (2m)** - **2 x 5/8 Wave C-Load (70cm)** - **Radial-less** --- ### 💡 **Why This Antenna Performs Well** ✔ Higher gain improves signal reach ✔ Dual band saves needing multiple antennas ✔ Radial-less design simplifies installation 👉 A **versatile, high-performance mobile aerial**. --- ### ⚠️ **Important Notes** ❗ Ensure compatible mount/connector (Motorola type) ❗ Best performance with proper grounding and positioning --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mounts & adaptors - Coax cable & connectors - Dual band radios - SWR meters & tuning tools --- ### 🔥 **Order Today** **Dual band power. Strong signal. Built for the road.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mrq-550-dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mrq-550-dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mrq-550-dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mrq-550-dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MRQ-550%20Dual%20Band%202M%2070CM%20Super%20Gainer%20Amateur%20Mobile%20Aerial%20Antenna%20VHF%20UHF&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmrq-550-dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mrq-550-dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mrq-550-dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mrq-550-dual-band-2m-70cm-super-gainer-amateur-mobile-aerial-antenna-vhf-uhf/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Microphone plug 7 pin pack of 3 mic plugs for Amateur or CB Radio](https://cbradio.co.uk/product/microphone-plug-7-pin-pack-of-3-mic-plugs-for-amateur-or-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔌 **3x 7 Pin Microphone Plugs – CB / Ham Radio Mic Connectors – Kenwood Yaesu Icom Alinco** **Essential Spares – Reliable Mic Connections** This **economy pack of 3 x 7-pin microphone plugs** is perfect for **repairing or building mic leads** for CB and amateur radio equipment. 👉 Ideal for **workshops, radio enthusiasts, and installers**. --- ### ✅ **Key Features** ✔ **Pack of 3 Microphone Plugs** ✔ **7 Pin Configuration** ✔ **Durable Construction** ✔ **Solder Type Connections** ✔ **Great Value Multi-Pack** --- ### 🎤 **Compatible With** - Kenwood - Yaesu - Icom - Alinco 👉 Suitable for radios using **7 pin microphone connections**. --- ### 📡 **Perfect For** - Microphone repairs - Custom mic cable builds - Replacing worn or damaged plugs - Workshop spare stock --- ### ⚙️ **Specifications** - Type: **7 Pin Microphone Plug** - Quantity: **Pack of 3** - Connection: **Solder Type** - Use: **CB & Amateur Radio Microphones** --- ### ⚠️ **Important Note** ❗ **Image may show 8 pin version** 👉 You will receive **7 pin plugs as described** ❗ Always check your radio’s pin configuration before purchase --- ### 💡 **Why Keep Spares** - Mic cables fail over time - Repairs are quick with the right parts - Saves downtime 👉 A must-have for **radio users and technicians**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - 4, 5, 6 & 8 pin mic plugs - Microphones & accessories - CB & Ham radio gear - Connectors & adaptors --- ### 🔥 **Order Today** **Fix it fast. Stay on air. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/microphone-plug-7-pin-pack-of-3-mic-plugs-for-amateur-or-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/microphone-plug-7-pin-pack-of-3-mic-plugs-for-amateur-or-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/microphone-plug-7-pin-pack-of-3-mic-plugs-for-amateur-or-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/microphone-plug-7-pin-pack-of-3-mic-plugs-for-amateur-or-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Microphone%20plug%207%20pin%20pack%20of%203%20mic%20plugs%20for%20Amateur%20or%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmicrophone-plug-7-pin-pack-of-3-mic-plugs-for-amateur-or-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/microphone-plug-7-pin-pack-of-3-mic-plugs-for-amateur-or-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/microphone-plug-7-pin-pack-of-3-mic-plugs-for-amateur-or-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/microphone-plug-7-pin-pack-of-3-mic-plugs-for-amateur-or-cb-radio/?share=telegram) - **Product categories:** Microphone Plugs --- ### [Kenwood TS-950sd spare PCB x53 b/3](https://cbradio.co.uk/product/kenwood-ts-950sd-spare-pcb-x53-b-3/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **Kenwood TS-950SD PCB Board X53-B/3 – Genuine Spare Part – Ham Radio Repair** **Original Part • Ideal for Repairs & Restoration** This is a **genuine PCB board (X53-B/3)** removed from a **Kenwood TS-950SD Transceiver**, perfect for **repairing or restoring your radio**. 👉 A hard-to-find component for a classic high-end HF rig. --- ### ✅ **Key Features** ✔ **Original Kenwood PCB Board** ✔ **Board Reference: X53-B/3** ✔ **Removed from Working Equipment** ✔ **Ideal for Repair or Spares** ✔ **Rare & Sought After Part** --- ### 📡 **Compatible With** - Kenwood TS-950SD Transceiver 👉 May suit other variants using the same board *(buyer to confirm)* --- ### 🔧 **Perfect For** - Repairing faulty TS-950SD radios - Spare parts stock - Restoration projects - Technician / workshop use --- ### ⚙️ **Specifications** - Type: **PCB Board** - Model: **X53-B/3** - Origin: **Kenwood TS-950SD** - Condition: **Used / Removed Part** --- ### 💡 **Why This Part Matters** With older radios: - Spare parts are hard to source - Repairs often depend on original boards - Availability is limited 👉 Essential for keeping **classic Kenwood radios alive**. --- ### ⚠️ **Important Notes** ❗ Sold as a **spare part** ❗ Compatibility must be confirmed by buyer ❗ May require technical knowledge to install --- ### ⭐ **Rare Component** These boards are: - Increasingly difficult to find - No longer widely available - In demand among enthusiasts 👉 Grab one while available. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Carefully handled --- ### 💬 **More Available** 👉 Check our shop for: - CB & Ham radio parts - Connectors & cables - Antennas & accessories - Radio repair components --- ### 🔥 **Order Today** **Keep your TS-950SD running – rare parts don’t last long.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/kenwood-ts-950sd-spare-pcb-x53-b-3/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/kenwood-ts-950sd-spare-pcb-x53-b-3/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/kenwood-ts-950sd-spare-pcb-x53-b-3/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/kenwood-ts-950sd-spare-pcb-x53-b-3/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Kenwood%20TS-950sd%20spare%20PCB%20x53%20b%2F3&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fkenwood-ts-950sd-spare-pcb-x53-b-3%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/kenwood-ts-950sd-spare-pcb-x53-b-3/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/kenwood-ts-950sd-spare-pcb-x53-b-3/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/kenwood-ts-950sd-spare-pcb-x53-b-3/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [PL259 UHF connector plugs 6mm screw on for RG58 brown insulator twin pack](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-6mm-screw-on-for-rg58-brown-insulator-twin-pack/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **2x PL259 UHF Plugs – 6mm RG58 – Screw On – Brown Insulator – 50Ω Coax Connectors** **Reliable RF Connection – Built for Proper Installs** This **twin pack of PL259 UHF connectors** is designed for **RG58 (6mm) coax cable**, offering a **secure, low-loss connection** for radio applications. 👉 Ideal for **CB, amateur radio, and scanner setups**. --- ### ✅ **Key Features** ✔ **Twin Pack (2 x PL259 Connectors)** ✔ **Fits 6mm RG58 Coax Cable** ✔ **50 Ohm Impedance** ✔ **Screw-On Type – Easy Installation** ✔ **Brown Insulator – Heat Resistant** --- ### 💪 **Superior Build Quality** ✔ **Brown Insulator Insert** 👉 Won’t melt when soldering *(unlike cheap white inserts)* ✔ **Durable Metal Construction** ✔ **Reliable Electrical Contact** --- ### 📡 **Perfect For** - CB radio installations - Amateur (Ham) radio - Scanner systems - Custom coax cable builds - Repairing existing leads --- ### ⚙️ **Specifications** - Type: **PL259 UHF Plug** - Cable Size: **6mm (RG58)** - Impedance: **50 Ohm** - Quantity: **Pack of 2** - Installation: **Screw-On / Solder Type** --- ### 💡 **Why Choose Quality PL259 Connectors** Cheap connectors: - Melt during soldering - Cause poor signal transfer - Fail over time 👉 These provide **durability, reliability, and proper performance**. --- ### ⚠️ **Important Notes** ❗ Designed for **RG58 (6mm) coax only** ❗ Ensure correct cable size before purchase --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - RG58 & RG213 coax cable - Adapters & connectors - Antennas & mounts - Radio accessories --- ### 🔥 **Order Today** **Fit it right. Solder it right. Perform properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-6mm-screw-on-for-rg58-brown-insulator-twin-pack/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-6mm-screw-on-for-rg58-brown-insulator-twin-pack/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-6mm-screw-on-for-rg58-brown-insulator-twin-pack/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-6mm-screw-on-for-rg58-brown-insulator-twin-pack/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PL259%20UHF%20connector%20plugs%206mm%20screw%20on%20for%20RG58%20brown%20insulator%20twin%20pack&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-uhf-connector-plugs-6mm-screw-on-for-rg58-brown-insulator-twin-pack%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-6mm-screw-on-for-rg58-brown-insulator-twin-pack/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-6mm-screw-on-for-rg58-brown-insulator-twin-pack/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-uhf-connector-plugs-6mm-screw-on-for-rg58-brown-insulator-twin-pack/?share=telegram) - **Product categories:** PL259 Connectors --- ### [N-PL DV winkle plug 6mm for use with sirio DV mounts](https://cbradio.co.uk/product/n-pl-dv-winkle-plug-6mm-for-use-with-sirio-dv-mounts/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **DV Winkel Plug 6mm – N-PL Connector for Sirio DV Mounts – Dome / DV Aerial Fitting** **Perfect Fit for DV Mounts – Secure & Reliable Connection** This **DV (Winkel) plug** is designed for use with **Sirio-style DV and dome mounts**, providing a **secure connection for your coax cable**. 👉 Essential for **clean, professional antenna installations**. --- ### ✅ **Key Features** ✔ **DV / Winkel Plug (Old Type)** ✔ **6mm Cable Entry – Ideal for RG58** ✔ **Compatible with DV & Dome Mounts** ✔ **Durable Metal Construction** ✔ **Secure & Reliable Connection** --- ### 📡 **Perfect For** - Sirio DV mounts - Dome style mounts - CB radio installations - Amateur (Ham) radio setups - Mobile antenna systems --- ### 🔧 **Compatibility** ✔ Fits **DV type mounts** ✔ Fits **dome mounts** ✔ Suitable for **Sirio-style installations** 👉 Works with mounts requiring **DV / N-PL style connection**. --- ### ⚙️ **Specifications** - Type: **DV Winkel Plug (Old Type)** - Cable Size: **6mm (RG58 type cable)** - Use: **DV / Dome Mount Connection** - Construction: **Metal Body** --- ### 💡 **Why You Need This Plug** Without the correct DV plug: - Cable won’t connect properly - Poor signal connection - Risk of damage or intermittent faults 👉 This ensures a **proper, secure fit every time**. --- ### ⚠️ **Important Notes** ❗ Ensure compatibility with your mount type ❗ Designed for **6mm coax cable (RG58 size)** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Available** 👉 Check our shop for: - DV mounts & dome mounts - Coax cable & connectors - PL259 & adaptors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Right plug. Proper fit. Reliable connection.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/n-pl-dv-winkle-plug-6mm-for-use-with-sirio-dv-mounts/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/n-pl-dv-winkle-plug-6mm-for-use-with-sirio-dv-mounts/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/n-pl-dv-winkle-plug-6mm-for-use-with-sirio-dv-mounts/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/n-pl-dv-winkle-plug-6mm-for-use-with-sirio-dv-mounts/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20N-PL%20DV%20winkle%20plug%206mm%20for%20use%20with%20sirio%20DV%20mounts&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fn-pl-dv-winkle-plug-6mm-for-use-with-sirio-dv-mounts%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/n-pl-dv-winkle-plug-6mm-for-use-with-sirio-dv-mounts/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/n-pl-dv-winkle-plug-6mm-for-use-with-sirio-dv-mounts/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/n-pl-dv-winkle-plug-6mm-for-use-with-sirio-dv-mounts/?share=telegram) - **Product categories:** RF Adaptors --- ### [N-type to SO239 socket adaptor for HAM radio or scanner](https://cbradio.co.uk/product/n-type-to-so239-socket-adaptor-for-ham-radio-or-scanner/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **SO239 (UHF Female) to N Type Male Adapter – PL259 to N Converter – Nickel Plated** **Connect PL259 Coax to N-Type Equipment – Simple & Reliable** This **SO239 (UHF Female) to N Male adaptor** allows you to connect a **PL259 coax cable** to equipment with an **N-type socket**. 👉 Ideal for **radios, scanners, and antennas using mixed connector types**. --- ### ✅ **Key Features** ✔ **SO239 (UHF Female) Input** – accepts PL259 plugs ✔ **N Type Male Output** – fits N-type sockets ✔ **Nickel Plated Body** – corrosion resistant ✔ **Teflon Insulator** – high performance & durability ✔ **Compact & Robust Design** --- ### 📡 **Perfect For** - CB radio setups - Amateur (Ham) radio - Scanner installations - Base station antennas - Converting between connector types --- ### 🔧 **Common Use Case** 👉 Your setup: - Antenna cable = **PL259 plug** - Radio / scanner = **N-type socket** ✔ This adaptor **bridges the connection instantly**. --- ### ⚙️ **Specifications** - Type: **RF Adapter** - Input: **SO239 (UHF Female)** - Output: **N Type Male** - Finish: **Nickel Plated** - Insulation: **Teflon (PTFE)** --- ### 💡 **Why Use a Quality Adapter** Cheap adapters: - Cause signal loss - Have poor contact - Corrode quickly 👉 This provides a **reliable, low-loss connection**. --- ### ⚠️ **Important Notes** ❗ Ensure correct connector types before purchase ❗ Suitable for standard RF coax applications --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - PL259 connectors - N-type adaptors - Coax cable & leads - Antennas & mounts --- ### 🔥 **Order Today** **Convert it. Connect it. Keep the signal strong.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/n-type-to-so239-socket-adaptor-for-ham-radio-or-scanner/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/n-type-to-so239-socket-adaptor-for-ham-radio-or-scanner/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/n-type-to-so239-socket-adaptor-for-ham-radio-or-scanner/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/n-type-to-so239-socket-adaptor-for-ham-radio-or-scanner/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20N-type%20to%20SO239%20socket%20adaptor%20for%20HAM%20radio%20or%20scanner&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fn-type-to-so239-socket-adaptor-for-ham-radio-or-scanner%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/n-type-to-so239-socket-adaptor-for-ham-radio-or-scanner/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/n-type-to-so239-socket-adaptor-for-ham-radio-or-scanner/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/n-type-to-so239-socket-adaptor-for-ham-radio-or-scanner/?share=telegram) - **Product categories:** RF Adaptors --- ### [Mini bullwhip modulator CB radio antenna aerial and DV body mount kit](https://cbradio.co.uk/product/mini-bullwhip-modulator-cb-radio-antenna-aerial-and-dv-body-mount-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **Sigma Mini Bullwhip CB Antenna + DV Body Mount Kit – 27MHz – 0.95m – 500W** **Compact Size • Strong Performance • Complete Kit** The **Sigma Mini Bullwhip Modulator CB antenna** is a **shorter, high-performance alternative** to full-size bullwhips, delivering **excellent range in a more compact design**. 👉 Supplied as a **complete kit with DV body mount** – ready to install. --- ### ✅ **Why Choose the Mini Bullwhip** ✔ **Compact 0.95m Design** – ideal where height is limited ✔ **Strong Signal Performance for Its Size** ✔ **Heavy Duty Coil Construction** ✔ **Flexible Stainless Steel Whip** ✔ **Pre-Tuned – Ready to Use** --- ### 📡 **Performance Highlights** - Covers full **26–28 MHz CB band (AM/FM)** - **Low SWR (~1.5:1)** for efficient transmission - **Omnidirectional signal (360° coverage)** 👉 A great balance of **size vs performance**. --- ### 🔧 **Complete Kit Includes** ✔ **Sigma Mini Bullwhip Antenna** ✔ **DV Body Mount** ✔ **Ready for installation** --- ### 🚗 **Perfect For** - Cars & vans - 4×4 & off-road vehicles - Daily drivers - Vehicles with height restrictions - Discreet CB setups --- ### ⚙️ **Specifications** - Model: **Sigma Mini Bullwhip Modulator** - Type: **1/4 Wave Base Loaded Mobile Antenna** - Frequency: **26–28 MHz** - Length: **0.95 Metres** - Power Handling: **Up to 500 Watts** - Coil Length: **220 mm** - Coil Diameter: **22 mm** - Impedance: **50 Ohms** - SWR: **Approx. 1.5:1** - Fitting: **3/8” UNF Thread** - Whip Material: **17/7 PH Stainless Steel** --- ### 💡 **Mini vs Full Size Bullwhip** Mini Bullwhip: ✔ Easier to fit ✔ Less noticeable ✔ Better for everyday use Full Size: ✔ Slightly more range 👉 This is the **ideal compromise for most users**. --- ### ⚠️ **Important Notes** ❗ Ensure suitable mounting position for best performance ❗ Grounding affects signal quality --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable & connectors - SWR meters & tuning tools - CB radios & accessories - Alternative mounts --- ### 🔥 **Order Today** **Compact size. Strong signal. Ready to go.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-bullwhip-modulator-cb-radio-antenna-aerial-and-dv-body-mount-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-bullwhip-modulator-cb-radio-antenna-aerial-and-dv-body-mount-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-bullwhip-modulator-cb-radio-antenna-aerial-and-dv-body-mount-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-bullwhip-modulator-cb-radio-antenna-aerial-and-dv-body-mount-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20bullwhip%20modulator%20CB%20radio%20antenna%20aerial%20and%20DV%20body%20mount%20kit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-bullwhip-modulator-cb-radio-antenna-aerial-and-dv-body-mount-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-bullwhip-modulator-cb-radio-antenna-aerial-and-dv-body-mount-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-bullwhip-modulator-cb-radio-antenna-aerial-and-dv-body-mount-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-bullwhip-modulator-cb-radio-antenna-aerial-and-dv-body-mount-kit/?share=telegram) - **Product categories:** Modulators --- ### [Suspension kit STD Duty Toyota LandCruiser Amazon 1998-2007 AHC replacement](https://cbradio.co.uk/product/suspension-kit-std-duty-toyota-landcruiser-amazon-1998-2007-ahc-replacement/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Standard Duty Suspension Kit – Toyota Land Cruiser Amazon 100 (V8) – AHC Conversion** **OEM Ride Feel • Reliable Setup • Built to Last** Upgrade your **Toyota Land Cruiser 100 Series (Amazon)** with this **standard duty suspension conversion kit**, designed to replace the **AHC (Active Height Control) system** while **retaining a factory-like ride comfort**. 👉 Perfect for those who want **reliability without sacrificing comfort**. --- ### ⚠️ **IMPORTANT – PLEASE READ** 📞 **PLEASE RING FIRST TO CHECK STOCK BEFORE PURCHASING** --- ### ✅ **Why Choose This Standard Duty Kit** ✔ **Replicates Factory Ride Feel** *(similar to AHC comfort setting)* ✔ **Eliminates AHC System Problems** ✔ **Improved Long-Term Reliability** ✔ **Lower Maintenance Costs** ✔ **Ideal for Everyday Driving** --- ### 💡 **Why Convert from AHC?** The factory AHC system: - Becomes unreliable with age - Suffers from expensive failures - Struggles as springs weaken Common failures include: - Height sensors - Hydraulic pump - Gas spheres 👉 Repairs quickly become **very costly**. --- ### 🔧 **Complete Conversion Kit Includes** ✔ **Front Torsion Bars** ✔ **Front Shock Absorbers** ✔ **Rear Coil Springs (Standard Duty)** ✔ **Rear Shock Absorbers** 👉 Full **front & rear suspension replacement**. --- ### 🚙 **Vehicle Compatibility** - Toyota Land Cruiser Amazon 100 Series - **4.7 V8 Models** ❗ **Important:** Torsion bar length varies by engine 👉 **Please confirm engine size at checkout** --- ### 📏 **Ride Characteristics** - Standard ride height - Comfort similar to original AHC system - Improved stability and consistency - No height adjustment – but far more reliable --- ### 🚗 **Perfect For** - Daily driving - Road-focused vehicles - Light towing - Owners wanting factory comfort without AHC issues --- ### ⚙️ **Key Features** ✔ Balanced spring rates for comfort ✔ Durable components for long-term use ✔ Designed specifically for Land Cruiser 100 ✔ Proven AHC replacement solution --- ### 📦 **Shipping Details** Supplied in **3 boxes**: - 📦 Box 1: 14kg – 55 × 20 × 18 cm - 📦 Box 2: 17.2kg – 124 × 14 × 7 cm - 📦 Box 3: 19kg – 63 × 48 × 25 cm --- ### ⭐ **Why Buy From Us** ✔ Land Cruiser specialists ✔ Proven conversion kits ✔ Quality components ✔ Real-world experience 👉 Built by people who understand these vehicles. --- ### ⚠️ **Important Notes** ❗ Designed for **AHC conversion vehicles** ❗ Professional installation recommended ❗ Contact us if unsure about compatibility --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Expert support available --- ### 💬 **More Available** 👉 Check our shop for: - Heavy duty lift kits - Bush kits & suspension parts - Land Cruiser spares - Off-road upgrades --- ### 🔥 **Order Today** **Keep the comfort. Lose the problems. Drive with confidence.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/suspension-kit-std-duty-toyota-landcruiser-amazon-1998-2007-ahc-replacement/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/suspension-kit-std-duty-toyota-landcruiser-amazon-1998-2007-ahc-replacement/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/suspension-kit-std-duty-toyota-landcruiser-amazon-1998-2007-ahc-replacement/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/suspension-kit-std-duty-toyota-landcruiser-amazon-1998-2007-ahc-replacement/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Suspension%20kit%20STD%20Duty%20Toyota%20LandCruiser%20Amazon%201998-2007%20AHC%20replacement&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsuspension-kit-std-duty-toyota-landcruiser-amazon-1998-2007-ahc-replacement%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/suspension-kit-std-duty-toyota-landcruiser-amazon-1998-2007-ahc-replacement/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/suspension-kit-std-duty-toyota-landcruiser-amazon-1998-2007-ahc-replacement/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/suspension-kit-std-duty-toyota-landcruiser-amazon-1998-2007-ahc-replacement/?share=telegram) - **Product categories:** Land Cruiser --- ### [Superstar 3900 SWR / CALL pot meter](https://cbradio.co.uk/product/superstar-3900-swr-call-pot-meter/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **Superstar 3900 SWR / CALL Potentiometer – CB Radio Replacement Pot – Genuine Style Part** **Restore Smooth Control – Hard to Find Replacement** This **SWR / CALL potentiometer** is a direct replacement part for the **Superstar 3900 CB radio**, ideal for fixing worn or “sloppy” controls. 👉 If your knob feels loose or inconsistent, this is the fix. --- ### ✅ **Key Features** ✔ **Replacement SWR / CALL Potentiometer** ✔ **Designed for Superstar 3900** ✔ **Restores Smooth, Accurate Adjustment** ✔ **High Quality Component** ✔ **Hard to Source Part** --- ### 📡 **Compatible With** - Superstar 3900 CB Radio 👉 May also suit other radios using the same specification *(check before purchase)* --- ### 🔧 **Perfect For** - Repairing worn or loose controls - Restoring SWR calibration function - Fixing intermittent adjustment issues - CB radio refurbishment projects --- ### 💡 **Common Fault** Over time: - Pots become **loose or “sloppy”** - Adjustment becomes **inaccurate or jumpy** - SWR/CALL function becomes unreliable 👉 Replacing the pot restores **precision and feel**. --- ### ⚠️ **Important Notes** ❗ Requires soldering and internal fitting ❗ Ensure compatibility before purchase ❗ Professional installation recommended if unsure --- ### ⭐ **Rare & Sought After** These parts: - Are increasingly **hard to find** - Often unavailable elsewhere - In demand for **classic CB radio repairs** 👉 Grab one while stock lasts. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - CB radio spare parts - Meter bulbs & components - Microphones & accessories - Connectors & cables --- ### 🔥 **Order Today** **Fix the feel. Restore the control. Keep your 3900 alive.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/superstar-3900-swr-call-pot-meter/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/superstar-3900-swr-call-pot-meter/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/superstar-3900-swr-call-pot-meter/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/superstar-3900-swr-call-pot-meter/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Superstar%203900%20SWR%20%2F%20CALL%20pot%20meter&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsuperstar-3900-swr-call-pot-meter%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/superstar-3900-swr-call-pot-meter/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/superstar-3900-swr-call-pot-meter/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/superstar-3900-swr-call-pot-meter/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [Superstar 3900 cb radio signal meter light bulb genuine ranger part](https://cbradio.co.uk/product/superstar-3900-cb-radio-signal-meter-light-bulb-genuine-ranger-part/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 💡📡 **Signal Meter Bulb for Superstar 3900 – Genuine Ranger Part – CB Radio Replacement Lamp** **Hard to Find • Genuine Part • Restore Your Meter Lighting** This **genuine Ranger signal meter light bulb** is the perfect replacement for the **Superstar 3900 CB radio**, restoring clear illumination to your meter display. 👉 If you’ve been searching for one… you’ll know how rare these are! --- ### ✅ **Key Features** ✔ **Genuine Ranger Part** ✔ **Direct Replacement for Superstar 3900** ✔ **Restores Signal Meter Illumination** ✔ **Hard to Find Item** ✔ **Simple Installation** --- ### 📡 **Compatible With** - Superstar 3900 CB Radio 👉 May also fit other radios using the same bulb type *(check before purchase)* --- ### 🔧 **Perfect For** - Repairing dim or failed meter lighting - Restoring vintage CB radios - Workshop spares - Radio refurbishment projects --- ### 💡 **Why This Part Matters** Without a working bulb: - Signal meter becomes hard to read - Night-time use is difficult - Radio loses its original look 👉 This restores both **function and appearance**. --- ### ⚠️ **Important Notes** ❗ Ensure compatibility before purchase ❗ Professional fitting recommended if unsure --- ### ⭐ **Rare & Sought After** These bulbs are: - Difficult to source - Often unavailable - In demand among enthusiasts 👉 Grab one while available. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - CB radio parts & spares - Microphones & accessories - Coax cable & connectors - Vintage radio items --- ### 🔥 **Order Today** **Bring your 3900 back to life – don’t miss out.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/superstar-3900-cb-radio-signal-meter-light-bulb-genuine-ranger-part/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/superstar-3900-cb-radio-signal-meter-light-bulb-genuine-ranger-part/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/superstar-3900-cb-radio-signal-meter-light-bulb-genuine-ranger-part/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/superstar-3900-cb-radio-signal-meter-light-bulb-genuine-ranger-part/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Superstar%203900%20cb%20radio%20signal%20meter%20light%20bulb%20genuine%20ranger%20part&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsuperstar-3900-cb-radio-signal-meter-light-bulb-genuine-ranger-part%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/superstar-3900-cb-radio-signal-meter-light-bulb-genuine-ranger-part/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/superstar-3900-cb-radio-signal-meter-light-bulb-genuine-ranger-part/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/superstar-3900-cb-radio-signal-meter-light-bulb-genuine-ranger-part/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [4 pin microphone mic plug CB or HAM radio](https://cbradio.co.uk/product/4-pin-microphone-mic-plug-cb-or-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔌 **4 Pin Microphone Plug – Metal CB Radio Mic Connector – Uniden / Cybernet Type** **Strong, Reliable Replacement for CB Microphones** This **standard 4 pin metal microphone plug** is ideal for **repairing or building mic leads** for CB radios. 👉 A must-have spare for **radio enthusiasts and installers**. --- ### ✅ **Key Features** ✔ **Standard 4 Pin Configuration** ✔ **Durable Metal Construction** ✔ **Built-In Cable Grip** – reduces strain on wiring ✔ **Locking Nut Design** – secure connection ✔ **Solder Type Connections** --- ### 🎤 **Compatible With** - Most **Cybernet-based CB radios** - Many **Uniden CB radios** - Other radios using **standard 4 pin mic connection** 👉 Always check your radio pin configuration before purchase. --- ### 📡 **Perfect For** - Microphone repairs - Custom mic lead builds - Replacement connectors - Workshop and radio spares --- ### ⚙️ **Specifications** - Type: **4 Pin Microphone Plug** - Material: **Metal Housing** - Connection: **Solder Type** - Features: **Cable Grip & Locking Nut** --- ### 🔧 **Installation Notes** - Requires soldering - Ensure correct wiring for your radio model - Cable grip helps prevent wire damage --- ### 💡 **Why Use a Quality Mic Plug** Cheap plugs: - Break easily - Have poor connections - Cause audio issues 👉 This provides a **solid, reliable connection for clear audio**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - 5, 6, 7 & 8 pin mic plugs - Microphones & accessories - CB radios & antennas - Connectors & adaptors --- ### 🔥 **Order Today** **Fix it fast. Stay connected. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-pin-microphone-mic-plug-cb-or-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-pin-microphone-mic-plug-cb-or-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-pin-microphone-mic-plug-cb-or-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-pin-microphone-mic-plug-cb-or-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20pin%20microphone%20mic%20plug%20CB%20or%20HAM%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-pin-microphone-mic-plug-cb-or-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-pin-microphone-mic-plug-cb-or-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-pin-microphone-mic-plug-cb-or-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-pin-microphone-mic-plug-cb-or-ham-radio/?share=telegram) - **Product categories:** Microphone Plugs --- ### [DIN in dash mount face plate for President Barry Ronald and Andy CB radio](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-president-barry-ronald-and-andy-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚗 **DIN Mount In-Dash Faceplate – President CB Radios – Metal Bracket 125x45mm** **Professional Fit • Clean Install • Built to Last** This **all-metal DIN mounting adapter** allows you to install your **President CB radio neatly into a standard dashboard slot**, giving a **factory-style finish** to your setup. 👉 Ideal for **cars, vans, and trucks** where a tidy, secure installation matters. --- ### ✅ **Why Choose This DIN Mount** ✔ **All Metal Construction** – strong & durable ✔ **Professional In-Dash Fit** – clean installation ✔ **Secure Mounting** – reduces vibration & movement ✔ **Precision Fit for President Radios** ✔ **Far Superior to Cheap Plastic Versions** --- ### 📡 **Compatible With President Radios** - President Teddy CB Radio - President Truman CB Radio - President Harry III CB Radio - President Tommy CB Radio - President Johnny III CB Radio - President Legend I CB Radio - President Jimmi III CB Radio - President Andy CB Radio - President Barry CB Radio - President Ronald CB Radio 👉 May fit other radios with similar dimensions. --- ### ⚙️ **Specifications** - Type: **DIN In-Dash Mount / Faceplate** - Material: **All Metal Construction** - Slot Dimensions: **125 x 45 mm** - Fitment: **Standard Dashboard DIN Slot** --- ### 🔊 **Important Speaker Note** ❗ When installed in a DIN mount: 👉 The radio’s built-in speaker will be **covered** 👉 An **external speaker is recommended** for clear audio --- ### 🚗 **Perfect For** - Car installations - Vans & commercial vehicles - Trucks / HGV setups - Professional CB installs --- ### ⚠️ **Important Notes** ❗ **CB Radio NOT included** ❗ Check compatibility and dimensions before purchase --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - External speakers - CB radios & accessories - Mounting kits & brackets - Coax cable & connectors --- ### 🔥 **Order Today** **Clean install. Solid fit. Professional finish.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-president-barry-ronald-and-andy-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-president-barry-ronald-and-andy-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-president-barry-ronald-and-andy-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-president-barry-ronald-and-andy-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DIN%20in%20dash%20mount%20face%20plate%20for%20President%20Barry%20Ronald%20and%20Andy%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdin-in-dash-mount-face-plate-for-president-barry-ronald-and-andy-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-president-barry-ronald-and-andy-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-president-barry-ronald-and-andy-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-president-barry-ronald-and-andy-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [F-connectors screw on type Sky Satellite Virgin Cable Aerial 10X for RG6 COAX](https://cbradio.co.uk/product/f-connectors-screw-on-type-sky-satellite-virgin-cable-aerial-10x-for-rg6-coax/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔩 **10x F Connectors RG6 – Screw On Type – Satellite / Sky / Virgin – Coax Plugs Pack** **Quick Fit • Reliable Connection • Essential Spares** This pack of **10 high-quality screw-on F connectors** is perfect for **satellite, cable TV, and aerial installations**, giving you a **secure and reliable connection** every time. 👉 Designed for **RG6 coax cable (6.4mm)** – quick and easy to install. --- ### ✅ **Key Features** ✔ **Pack of 10 F Connectors** ✔ **Screw-On Type – No Crimping Required** ✔ **Standard RG6 Size (6.4mm)** ✔ **Durable Metal Construction** ✔ **Quick & Easy Installation** --- ### 📡 **Perfect For** - Satellite TV installations - Cable TV systems - Aerial connections - Sky & Virgin setups - DIY cable making & repairs --- ### 🔧 **Compatible Cable Types** ✔ RG6 ✔ CT100 ✔ HF109 ✔ Other 6.4mm coax cables --- ### ⚙️ **Specifications** - Type: **F Connector (Screw-On)** - Size: **6.4mm (RG6 Standard)** - Quantity: **Pack of 10** - Installation: **Tool-Free (Screw Fit)** --- ### 💡 **Why Choose Screw-On Connectors** ✔ Fast installation ✔ No special tools required ✔ Ideal for DIY setups ✔ Easy to replace or adjust --- ### ⚠️ **Important Notes** ❗ Ensure cable is **RG6 size (6.4mm)** for correct fit ❗ Not suitable for smaller cables like RG59 --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable (RG6, RG58, RG213) - Splitters & couplers - TV aerial plugs & adaptors - Satellite accessories --- ### 🔥 **Order Today** **Cut it. Screw it. Connect it. Simple.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/f-connectors-screw-on-type-sky-satellite-virgin-cable-aerial-10x-for-rg6-coax/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/f-connectors-screw-on-type-sky-satellite-virgin-cable-aerial-10x-for-rg6-coax/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/f-connectors-screw-on-type-sky-satellite-virgin-cable-aerial-10x-for-rg6-coax/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/f-connectors-screw-on-type-sky-satellite-virgin-cable-aerial-10x-for-rg6-coax/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20F-connectors%20screw%20on%20type%20Sky%20Satellite%20Virgin%20Cable%20Aerial%2010X%20for%20RG6%20COAX&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ff-connectors-screw-on-type-sky-satellite-virgin-cable-aerial-10x-for-rg6-coax%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/f-connectors-screw-on-type-sky-satellite-virgin-cable-aerial-10x-for-rg6-coax/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/f-connectors-screw-on-type-sky-satellite-virgin-cable-aerial-10x-for-rg6-coax/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/f-connectors-screw-on-type-sky-satellite-virgin-cable-aerial-10x-for-rg6-coax/?share=telegram) - **Product categories:** Installation aid --- ### [BNC Female to Reverse SMA Female Adaptor for Baofeng](https://cbradio.co.uk/product/bnc-female-to-reverse-sma-female-adaptor-for-baofeng/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **BNC Female to Reverse SMA Female Adaptor – Baofeng / Wouxun / Quansheng Converter** **Connect Your Handheld to External Antennas Easily** This **BNC Female to Reverse SMA Female adaptor** allows you to connect a **BNC-based antenna or cable** to handheld radios that use a **Reverse SMA connection**. 👉 Perfect for upgrading your handheld with a **base or mobile antenna for better performance**. --- ### ✅ **Key Features** ✔ **BNC Female Input** – accepts BNC male connectors ✔ **Reverse SMA Female Output** – fits many handheld radios ✔ **Compact & Durable Metal Construction** ✔ **Low Loss Signal Transfer** ✔ **Simple Plug & Play Design** --- ### 📡 **Perfect For** - Connecting handheld radios to base antennas - Using BNC antennas on handheld radios - Improving signal strength and range - Home, mobile, or field setups --- ### 📻 **Compatible With** - Baofeng - Wouxun - Quansheng 👉 Suitable for radios with **Reverse SMA Female antenna socket**. --- ### ⚙️ **Specifications** - Type: **RF Adaptor / Connector** - Input: **BNC Female** - Output: **Reverse SMA Female** - Construction: **Metal Body** - Use: **Antenna / coax connection conversion** --- ### 💡 **Why Use This Adaptor** Standard handheld antennas: - Limited range - Lower gain - Poor indoor performance 👉 This adaptor lets you use **larger external antennas for improved reception and transmission**. --- ### ⚠️ **Important Notes** ❗ Ensure your radio uses **Reverse SMA Female connection** ❗ Designed for standard BNC antenna/cable connections --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable & connectors - Antennas & mounts - RF adaptors & converters - CB & Ham radio accessories --- ### 🔥 **Order Today** **Connect it. Upgrade it. Extend your range.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/bnc-female-to-reverse-sma-female-adaptor-for-baofeng/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/bnc-female-to-reverse-sma-female-adaptor-for-baofeng/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/bnc-female-to-reverse-sma-female-adaptor-for-baofeng/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/bnc-female-to-reverse-sma-female-adaptor-for-baofeng/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20BNC%20Female%20to%20Reverse%20SMA%20%20Female%20Adaptor%20for%20Baofeng&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fbnc-female-to-reverse-sma-female-adaptor-for-baofeng%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/bnc-female-to-reverse-sma-female-adaptor-for-baofeng/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/bnc-female-to-reverse-sma-female-adaptor-for-baofeng/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/bnc-female-to-reverse-sma-female-adaptor-for-baofeng/?share=telegram) - **Product categories:** RF Adaptors --- ### [TV aerial Y splitter molded type split your TV aerial signal for 2 TV's](https://cbradio.co.uk/product/tv-aerial-y-splitter-molded-type-split-your-tv-aerial-signal-for-2-tvs/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📺🔌 **TV Aerial Y Splitter – 2 Way Signal Splitter – Moulded Coax RF Adapter for 2 TVs** **Split One Aerial Signal to Two TVs – Simple & Reliable** This **TV aerial Y splitter** allows you to connect **two TVs to a single aerial feed**, making it a quick and easy solution for **home, caravan, or workshop setups**. 👉 No complicated installation – just plug in and go. --- ### ✅ **Key Features** ✔ **2-Way Signal Splitter (Y Type)** ✔ **Moulded Solid Construction** – won’t fall apart ✔ **Compact & Easy to Use** ✔ **Standard TV Coax Connections** ✔ **No Tools Required** --- ### 💪 **Better Than Cheap Splitters** Cheap plastic versions: - Crack or come apart - Give poor connections - Reduce reliability 👉 This unit features a **durable moulded casing** for long-term use. --- ### 📡 **Perfect For** - Running **2 TVs from one aerial** - Caravans & motorhomes - Bedrooms & second rooms - Workshop or garage setups - Temporary installations --- ### ⚙️ **Specifications** - Type: **Y Splitter / 2 Way RF Splitter** - Connection: **Standard TV Coax (RF)** - Construction: **Moulded Body** - Use: **Split aerial signal to 2 outputs** --- ### ⚠️ **Important Notes** ❗ Passive splitter – signal is divided between outputs 👉 In weak signal areas, a **booster may be required** ❗ Not suitable for satellite (F-type connections) --- ### 💡 **Why You Need This** Without a splitter: - Only one TV can be connected - Extra cabling is required 👉 This provides a **quick and cost-effective solution**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable & extensions - TV aerial plugs & adaptors - Signal boosters - Caravan TV accessories --- ### 🔥 **Order Today** **Split it. Share it. Watch anywhere.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tv-aerial-y-splitter-molded-type-split-your-tv-aerial-signal-for-2-tvs/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tv-aerial-y-splitter-molded-type-split-your-tv-aerial-signal-for-2-tvs/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tv-aerial-y-splitter-molded-type-split-your-tv-aerial-signal-for-2-tvs/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tv-aerial-y-splitter-molded-type-split-your-tv-aerial-signal-for-2-tvs/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TV%20aerial%20Y%20splitter%20molded%20type%20split%20your%20TV%20aerial%20signal%20for%202%20TV%27s&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftv-aerial-y-splitter-molded-type-split-your-tv-aerial-signal-for-2-tvs%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tv-aerial-y-splitter-molded-type-split-your-tv-aerial-signal-for-2-tvs/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tv-aerial-y-splitter-molded-type-split-your-tv-aerial-signal-for-2-tvs/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tv-aerial-y-splitter-molded-type-split-your-tv-aerial-signal-for-2-tvs/?share=telegram) - **Product categories:** Other --- ### [so239 pl259 female to reverse SMA female adaptor for Baofeng](https://cbradio.co.uk/product/so239-pl259-female-to-reverse-sma-female-adaptor-for-baofeng/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **SO239 to Reverse SMA Female Adaptor – PL259 to Baofeng / Wouxun / Quansheng Converter** **Connect Your Handheld to a Base or Mobile Antenna** This **SO239 to Reverse SMA Female adaptor** allows you to connect a **PL259-equipped coax cable** (from a base or mobile antenna) directly to your **handheld radio**. 👉 Instantly improve range and performance by using a **proper external antenna**. --- ### ✅ **Key Features** ✔ **SO239 (UHF Female) Input** – accepts PL259 connectors ✔ **Reverse SMA Female Output** – fits many handheld radios ✔ **Compact & Durable Metal Construction** ✔ **Low Loss Connection** ✔ **Simple Plug & Play Use** --- ### 📡 **Perfect For** - Connecting handheld radios to base antennas - Using mobile antennas with handheld radios - Improving signal strength and range - Home or field radio setups --- ### 📻 **Compatible With** - Baofeng - Wouxun - Quansheng 👉 Suitable for radios with **Reverse SMA Female antenna connection**. --- ### ⚙️ **Specifications** - Type: **RF Adaptor / Connector** - Input: **SO239 (UHF Female)** - Output: **Reverse SMA Female** - Construction: **Metal Body** - Use: **Coax to handheld radio connection** --- ### 💡 **Why Use This Adaptor** Handheld antennas are limited: - Short range - Lower gain - Poor indoor performance 👉 This adaptor lets you use a **full-size antenna for much better performance**. --- ### ⚠️ **Important Notes** ❗ Ensure your radio uses **Reverse SMA Female** connection ❗ Designed for standard PL259 coax connections --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable & PL259 connectors - Base & mobile antennas - RF adaptors & converters - CB & Ham radio accessories --- ### 🔥 **Order Today** **Upgrade your handheld. Extend your range. Stay connected.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/so239-pl259-female-to-reverse-sma-female-adaptor-for-baofeng/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/so239-pl259-female-to-reverse-sma-female-adaptor-for-baofeng/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/so239-pl259-female-to-reverse-sma-female-adaptor-for-baofeng/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/so239-pl259-female-to-reverse-sma-female-adaptor-for-baofeng/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20so239%20pl259%20female%20to%20reverse%20SMA%20female%20adaptor%20for%20Baofeng&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fso239-pl259-female-to-reverse-sma-female-adaptor-for-baofeng%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/so239-pl259-female-to-reverse-sma-female-adaptor-for-baofeng/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/so239-pl259-female-to-reverse-sma-female-adaptor-for-baofeng/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/so239-pl259-female-to-reverse-sma-female-adaptor-for-baofeng/?share=telegram) - **Product categories:** RF Adaptors --- ### [2" inch lift kit HD for Toyota Land-Cruiser 100 Amazon 1998-2007 AHC replacement](https://cbradio.co.uk/product/2-inch-lift-kit-hd-for-toyota-land-cruiser-100-amazon-1998-2007-ahc-replacement/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **2″ Heavy Duty Suspension Lift Kit – Toyota Land Cruiser Amazon 100 (V8) – AHC Conversion** **Stronger • More Reliable • Built for Towing & Heavy Use** Upgrade your **Toyota Land Cruiser 100 Series (Amazon)** with this **heavy-duty 2″ suspension lift kit**, designed as a **full AHC (Active Height Control) conversion** for long-term reliability. 👉 Ideal for **towing, load carrying, and off-road use**. --- ### ⚠️ **IMPORTANT – PLEASE READ** 📞 **PLEASE RING FIRST TO CHECK STOCK BEFORE PURCHASING** --- ### 💪 **Why Convert from AHC?** The factory **Active Height Control (AHC)** system: - Becomes **unreliable with age** - Suffers from **expensive component failures** - Struggles under **heavy loads or towing** Common failures include: - Height sensors - Hydraulic pump - Gas spheres 👉 Repairs can become **very costly very quickly**. --- ### ✅ **The Solution – Full Conversion Kit** This kit replaces the AHC system with a **traditional spring & damper setup**: ✔ **Improved reliability** ✔ **Lower maintenance costs** ✔ **Better suited for towing & heavy loads** ✔ **No more AHC faults or warning lights** --- ### 🔧 **What’s Included** ✔ **Front Heavy Duty Torsion Bars** ✔ **Front Shock Absorbers** ✔ **Rear Heavy Duty Coil Springs** ✔ **Rear Shock Absorbers** 👉 Complete **front & rear suspension conversion kit**. --- ### 🚙 **Vehicle Compatibility** - Toyota Land Cruiser Amazon 100 Series - **4.7 V8 Models** ❗ **Important:** Torsion bar length varies by engine 👉 **Please confirm engine type at checkout** --- ### 📏 **Lift & Performance** - Approx. **2″ lift** - Designed for **heavy-duty use & towing** - Also available in **standard height (soft ride option)** --- ### ⚙️ **Key Features** ✔ Heavy duty spring rates for load handling ✔ Improved ride stability under weight ✔ Durable components for long-term use ✔ Designed specifically for Land Cruiser 100 --- ### 🚜 **Perfect For** - Towing caravans or trailers - Off-road driving - Overland builds - Work vehicles - Replacing failed AHC systems --- ### 📦 **Shipping Details** Supplied in **3 boxes**: - 📦 Box 1: 14kg – 55 × 20 × 18 cm - 📦 Box 2: 17.2kg – 124 × 14 × 7 cm - 📦 Box 3: 19kg – 63 × 48 × 25 cm --- ### ⭐ **Why Buy From Us** ✔ Specialists in 4×4 & Land Cruiser parts ✔ Proven conversion solution ✔ Quality components built to last ✔ Real-world experience – not generic kits --- ### ⚠️ **Important Notes** ❗ Designed for **AHC conversion vehicles** ❗ Professional installation recommended ❗ Contact us if unsure about compatibility --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Expert support available --- ### 💬 **More Available** 👉 Check our shop for: - Standard ride conversion kits - Bush kits & suspension parts - Land Cruiser spares - Off-road accessories --- ### 🔥 **Order Today** **Ditch the AHC. Gain reliability. Build it properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-inch-lift-kit-hd-for-toyota-land-cruiser-100-amazon-1998-2007-ahc-replacement/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-inch-lift-kit-hd-for-toyota-land-cruiser-100-amazon-1998-2007-ahc-replacement/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-inch-lift-kit-hd-for-toyota-land-cruiser-100-amazon-1998-2007-ahc-replacement/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-inch-lift-kit-hd-for-toyota-land-cruiser-100-amazon-1998-2007-ahc-replacement/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%22%20inch%20lift%20kit%20HD%20for%20Toyota%20Land-Cruiser%20100%20Amazon%201998-2007%20AHC%20replacement&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-inch-lift-kit-hd-for-toyota-land-cruiser-100-amazon-1998-2007-ahc-replacement%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-inch-lift-kit-hd-for-toyota-land-cruiser-100-amazon-1998-2007-ahc-replacement/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-inch-lift-kit-hd-for-toyota-land-cruiser-100-amazon-1998-2007-ahc-replacement/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-inch-lift-kit-hd-for-toyota-land-cruiser-100-amazon-1998-2007-ahc-replacement/?share=telegram) - **Product categories:** Land Cruiser --- ### [RG213 mil spec high quality low loss coax any length](https://cbradio.co.uk/product/rg213-mil-spec-high-quality-low-loss-coax-any-length/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **RG213U Coax Cable MIL-SPEC – Low Loss 50 Ohm – Sold Per Metre – CB / Ham / VHF UHF** **Professional Grade Coax – Serious Performance for Transmission** This **high-quality RG213U MIL-SPEC coax cable** is built for **low loss performance and long-term reliability**, making it ideal for **CB, amateur radio, and professional installations**. 👉 Sold **per metre** – order the length you need *(minimum 10m)*. --- ### 💪 **MIL-SPEC Quality – Built Properly** ✔ **98% Dense Copper Braid** – excellent shielding ✔ **Stranded Copper Core** – flexibility & durability ✔ **Low Loss Performance** – ideal for transmission ✔ **Heavy Duty Outer Sheath** – built for outdoor use 👉 This is **serious coax – not cheap RG213**. --- ### ✅ **How to Order** - **Minimum order: 10 metres** - Enter required length in quantity box 👉 Example: - Qty 10 = **10m continuous length** - Qty 20 = **20m continuous length** ✔ Always supplied as **one continuous run** --- ### 📡 **Perfect For** - CB Radio installations - Amateur (Ham) radio - VHF / UHF systems - Taxi & commercial antennas - Base station setups --- ### ⚙️ **Specifications** - Cable Type: **RG213U MIL-SPEC** - Impedance: **50 Ohm** - Diameter: **9.65mm (approx. 9mm)** - Core: **7 x 0.72mm Stranded Copper** - Shielding: **98% Copper Braid (192 x 0.20)** - Colour: **Black** - Loss @ 100MHz: **0.7 dB per 10m** --- ### 📉 **Why Choose RG213 Over RG58** - Lower signal loss - Better shielding - Handles higher power - Ideal for longer cable runs 👉 The **go-to choice for serious installations**. --- ### ⚠️ **Important Notes** ❗ Sold **per metre (minimum 10m)** ❗ No connectors included – see our shop for PL259 plugs --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Cut to your required length --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - PL259 connectors - Antennas & mounts - SWR meters & tuning tools - Other coax types (RG58 / RG8X) --- ### 🔥 **Order Today** **Low loss. High quality. Built for serious radio use.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg213-mil-spec-high-quality-low-loss-coax-any-length/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg213-mil-spec-high-quality-low-loss-coax-any-length/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg213-mil-spec-high-quality-low-loss-coax-any-length/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg213-mil-spec-high-quality-low-loss-coax-any-length/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG213%20mil%20spec%20high%20quality%20low%20loss%20coax%20any%20length&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg213-mil-spec-high-quality-low-loss-coax-any-length%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg213-mil-spec-high-quality-low-loss-coax-any-length/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg213-mil-spec-high-quality-low-loss-coax-any-length/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg213-mil-spec-high-quality-low-loss-coax-any-length/?share=telegram) - **Product categories:** RG213 --- ### [TV Aerial In line coax barrel female Coupler Caravan Accessories](https://cbradio.co.uk/product/tv-aerial-in-line-coax-barrel-female-coupler-caravan-accessories/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📺🔌 **Coax Barrel Connector – Female to Female RF Coupler – TV Aerial Joiner – Caravan / Sky Link** **Simple Cable Extension – Reliable Signal Connection** This **female-to-female coax barrel connector** is designed to **join two coax aerial cables**, making it ideal for **extending TV leads or linking RF connections**. 👉 A quick and effective solution for **home and mobile installations**. --- ### ✅ **Key Features** ✔ **Female to Female RF Connector** ✔ **Joins Two Coax Leads Instantly** ✔ **Compact & Durable Design** ✔ **Easy Plug & Play Installation** ✔ **Suitable for Indoor & Mobile Use** --- ### 📡 **Perfect For** - TV aerial cable extensions - Caravan & motorhome setups - Sky TV Link connections - RF2 outlet connections - General coax installations --- ### 🔧 **Common Uses** - Extend existing aerial cables - Join two male coax connectors - Connect to **RF2 output for Sky TV Link systems** - Ideal when sockets are **too far apart** --- ### ⚙️ **Specifications** - Type: **Coax Barrel Connector / Coupler** - Connection: **Female to Female** - Fitment: **Standard TV RF Coax Connectors** - Use: **Signal extension / cable joining** --- ### 💡 **Why You Need One** Without a coupler: - Cable runs are limited - Extensions require new cables - Installations become inconvenient 👉 This provides a **quick, cost-effective fix**. --- ### ⚠️ **Important Notes** ❗ Ensure compatibility with standard TV coax connectors ❗ Designed for RF aerial use (not satellite F-type) --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable & extensions - TV aerial plugs & adaptors - Caravan accessories - Connectors & fittings --- ### 🔥 **Order Today** **Join it. Extend it. Keep the signal flowing.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tv-aerial-in-line-coax-barrel-female-coupler-caravan-accessories/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tv-aerial-in-line-coax-barrel-female-coupler-caravan-accessories/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tv-aerial-in-line-coax-barrel-female-coupler-caravan-accessories/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tv-aerial-in-line-coax-barrel-female-coupler-caravan-accessories/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TV%20Aerial%20In%20line%20coax%20barrel%20female%20Coupler%20Caravan%20Accessories&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftv-aerial-in-line-coax-barrel-female-coupler-caravan-accessories%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tv-aerial-in-line-coax-barrel-female-coupler-caravan-accessories/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tv-aerial-in-line-coax-barrel-female-coupler-caravan-accessories/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tv-aerial-in-line-coax-barrel-female-coupler-caravan-accessories/?share=telegram) - **Product categories:** Installation aid --- ### [Amateur Radio Band Plan HF to 23cm Full colour Laminated](https://cbradio.co.uk/product/amateur-radio-band-plan-hf-to-23cm-full-colour-laminated/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📘 **Amateur Radio Band Plan Chart – HF to 23cm – Full Colour Laminated – 3 Sheet Set** **Clear • Durable • Essential for Every Shack** This **full colour Amateur Radio Band Plan** covers frequencies from **HF through to 23cm**, printed on **high-quality paper** and **fully laminated** for long-term use. 👉 Supplied as a **3-sheet laminated set** – perfect for your **radio shack wall**. --- ### ✅ **Key Features** ✔ **Full Colour Print** – clear and easy to read ✔ **Covers HF to 23cm Bands** ✔ **Laminated for Durability** – wipe clean & long-lasting ✔ **3 Sheet Set** – expanded detail and readability ✔ **High Quality Print Finish** --- ### 📡 **What It Covers** - HF Bands - VHF & UHF - Microwave Bands up to **23cm** - Band allocations & segments 👉 A **quick reference guide** for everyday radio use. --- ### 🏠 **Perfect For** - Amateur (Ham) radio operators - Radio shacks & workshops - Training & study - Quick frequency reference --- ### 🖨 **Premium Print Quality** - Printed using **high-quality colour laser printing** - Sharp, vibrant colours - Designed for **easy readability at a glance** --- ### 💪 **Laminated Protection** ✔ Resistant to wear & tear ✔ Protects against dirt and moisture ✔ Ideal for long-term wall display --- ### ⚙️ **Specifications** - Type: **Amateur Radio Band Plan Chart** - Coverage: **HF to 23cm** - Format: **3 Laminated Sheets** - Finish: **Full Colour Print** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to display --- ### 💬 **More Available** 👉 Check our shop for: - CB radio frequency charts - Antennas & accessories - Coax cable & connectors - Radio equipment --- ### 🔥 **Order Today** **Stay on frequency. Stay organised. Operate with confidence.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/amateur-radio-band-plan-hf-to-23cm-full-colour-laminated/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/amateur-radio-band-plan-hf-to-23cm-full-colour-laminated/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/amateur-radio-band-plan-hf-to-23cm-full-colour-laminated/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/amateur-radio-band-plan-hf-to-23cm-full-colour-laminated/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Amateur%20Radio%20Band%20Plan%20HF%20to%2023cm%20Full%20colour%20Laminated&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Famateur-radio-band-plan-hf-to-23cm-full-colour-laminated%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/amateur-radio-band-plan-hf-to-23cm-full-colour-laminated/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/amateur-radio-band-plan-hf-to-23cm-full-colour-laminated/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/amateur-radio-band-plan-hf-to-23cm-full-colour-laminated/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [TV aerial coax plug aluminium motorhome caravan pack of 4 plugs](https://cbradio.co.uk/product/tv-aerial-coax-plug-aluminium-motorhome-caravan-pack-of-4-plugs/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📺🔌 **4x TV Aerial Coax Plugs – Aluminium – Caravan / Motorhome / Boat – RF Connectors Pack** **Reliable TV Connections – Perfect for Mobile Setups** This pack of **4 high-quality TV aerial coax plugs** is ideal for **making or extending aerial leads** in caravans, motorhomes, boats, and other mobile environments. 👉 A simple, reliable solution for **custom cable builds and extensions**. --- ### ✅ **Key Features** ✔ **Pack of 4 Aerial Plugs** ✔ **Durable Aluminium Construction** ✔ **Standard TV Coax Fit** ✔ **Easy to Install** ✔ **Ideal for DIY Cable Assembly** --- ### 🚐 **Perfect For** - Caravans - Motorhomes - Boats - Horseboxes - Camper vans - Home TV aerial extensions --- ### 🔧 **Ideal Applications** - Making custom coax leads - Extending existing aerial cables - Connecting remote TV points - Replacing worn or damaged plugs 👉 Perfect when sockets are **far from your equipment**. --- ### ⚙️ **Specifications** - Type: **TV Aerial Coax Plug** - Material: **Aluminium** - Quantity: **Pack of 4** - Fitment: **Standard RF Coax Cable** --- ### 💡 **Why You Need These** Without spare plugs: - Cable extensions become difficult - Repairs require full cable replacement - Installations are limited 👉 These give you **flexibility and convenience**. --- ### ⚠️ **Important Notes** ❗ Ensure compatibility with your coax cable type ❗ Suitable for standard TV aerial applications --- ### 📦 **More Options Available** 👉 Need longer cable? Check our shop for **25m coax leads and accessories** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable & extensions - TV aerials - Connectors & adaptors - Caravan electrical accessories --- ### 🔥 **Order Today** **Connect it. Extend it. Watch without hassle.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tv-aerial-coax-plug-aluminium-motorhome-caravan-pack-of-4-plugs/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tv-aerial-coax-plug-aluminium-motorhome-caravan-pack-of-4-plugs/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tv-aerial-coax-plug-aluminium-motorhome-caravan-pack-of-4-plugs/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tv-aerial-coax-plug-aluminium-motorhome-caravan-pack-of-4-plugs/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TV%20aerial%20coax%20plug%20aluminium%20motorhome%20caravan%20pack%20of%204%20plugs&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftv-aerial-coax-plug-aluminium-motorhome-caravan-pack-of-4-plugs%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tv-aerial-coax-plug-aluminium-motorhome-caravan-pack-of-4-plugs/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tv-aerial-coax-plug-aluminium-motorhome-caravan-pack-of-4-plugs/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tv-aerial-coax-plug-aluminium-motorhome-caravan-pack-of-4-plugs/?share=telegram) - **Product categories:** Installation aid --- ### [LM-30 25 to 30 Amp regulated variable voltage linear power supply pack](https://cbradio.co.uk/product/lm-30-25-to-30-amp-regulated-variable-voltage-linear-power-supply-pack/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚡📡 **LM30 Linear Power Supply 30A – Adjustable 1.5–15V DC – Regulated PSU for CB & HF Radio** **Stable, Clean Power – Built for Serious Radio Use** The **LM30 DC regulated linear power supply** delivers **smooth, low-noise power**, making it ideal for **CB, HF, and amateur radio equipment** where reliability and RF immunity matter. 👉 Designed for **radio enthusiasts who need clean, stable voltage without interference**. --- ### ✅ **Why Choose a Linear Power Supply** ✔ **Ultra Low Noise Output** – ideal for radio equipment ✔ **RF Quiet Operation** – no switching noise interference ✔ **Stable Voltage Regulation (<1%)** ✔ **Reliable for Continuous Use** 👉 Perfect for **HF transceivers and sensitive electronics**. --- ### ⚙️ **Key Features** ✔ **Adjustable Output: 1.5V – 15V DC** ✔ **30A Max / 20A Continuous Output** ✔ **Analogue Meter Display (Voltage & Current)** ✔ **Heavy Duty Binding Posts (20/30A)** ✔ **Cigarette Socket Output (10A Max)** ✔ **Terminal Block Outputs (3A per pair)** ✔ **Short Circuit & Current Limiting Protection** ✔ **Panel Mount Fuse Protection** --- ### 📡 **Perfect For** - CB Radio - HF / Amateur (Ham) Transceivers - Base station setups - Workshop & bench use - 12V radio equipment --- ### 📊 **Clear Analogue Monitoring** - **Voltmeter (V)** – shows output voltage - **Ammeter (A)** – shows current draw 👉 Easy to monitor and adjust your setup in real time. --- ### ⚙️ **Technical Specifications** - Model: **LM30 Linear PSU** - Input Voltage: **220V AC 50Hz** - Output Voltage: **1.5V – 15V DC (Adjustable)** - Output Current: **30A Max / 20A Continuous** - Load Regulation: **<1%** - Ripple / Noise: **<10mV** - Operating Temp: **0°C – 40°C** - Humidity: **<80% RH** - Dimensions: **240 x 300 x 150 mm** - Weight: **Approx. 8.9kg** --- ### ⚠️ **Why Not Use Cheap Power Supplies** Low-quality PSU’s: - Create RF interference - Have unstable voltage - Can damage sensitive equipment 👉 The LM30 provides **clean, reliable power for serious radio users**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB & Ham radios - Antennas & mounts - Coax cable & connectors - SWR meters & accessories --- ### 🔥 **Order Today** **Clean power. Stable output. Built for radio.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/lm-30-25-to-30-amp-regulated-variable-voltage-linear-power-supply-pack/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/lm-30-25-to-30-amp-regulated-variable-voltage-linear-power-supply-pack/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/lm-30-25-to-30-amp-regulated-variable-voltage-linear-power-supply-pack/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/lm-30-25-to-30-amp-regulated-variable-voltage-linear-power-supply-pack/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20LM-30%2025%20to%2030%20Amp%20regulated%20variable%20voltage%20linear%20power%20supply%20pack&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flm-30-25-to-30-amp-regulated-variable-voltage-linear-power-supply-pack%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/lm-30-25-to-30-amp-regulated-variable-voltage-linear-power-supply-pack/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/lm-30-25-to-30-amp-regulated-variable-voltage-linear-power-supply-pack/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/lm-30-25-to-30-amp-regulated-variable-voltage-linear-power-supply-pack/?share=telegram) - **Product categories:** Power Supplies and Inverters --- ### [20ft mast in 4 swaged sections medium Duty Gauge Swaged Pole Set - 20ft x 38mm](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔧 **20ft Aluminium Mast Pole – 4 Section Swaged Set – 38mm (1.5″) – Medium Duty Aerial Mast** **Strong, Lightweight & Easy to Assemble** This **20ft aluminium mast pole set** comes in **4 swaged sections**, making it ideal for **portable or permanent antenna installations**. 👉 A reliable solution for **CB, amateur radio, and TV aerial setups**. --- ### ✅ **Key Features** ✔ **4 x 5ft Swaged Sections** – quick and easy assembly ✔ **38mm Diameter (1.5″)** – strong and stable ✔ **Aluminium Construction** – lightweight & corrosion resistant ✔ **Medium Duty Gauge (1.6mm)** – ideal balance of strength & weight ✔ **Suitable for Portable or Fixed Installations** --- ### 📡 **Perfect For** - CB Base Station Antennas - Amateur (Ham) Radio - TV Aerial Installations - Temporary / Field Setups - Garden & Workshop Use --- ### ⚙️ **Specifications** - Type: **Swaged Aluminium Mast Pole** - Total Length: **20ft (Approx. 6.1m)** - Sections: **4 x 5ft (Swaged)** - Diameter: **38mm OD (1.5″)** - Wall Thickness: **1.6mm (Medium Duty)** - Material: **Aluminium** --- ### 🔧 **Swaged Design Benefits** ✔ Sections slot securely into each other ✔ No need for complex fixings ✔ Easy transport and storage ✔ Quick assembly on-site --- ### ⚠️ **Installation Advice** ❗ For best results: - Use **wall brackets or mast clamps** - **Guy wires recommended** for stability at full height - Mount clear of obstructions for best signal --- ### 💪 **Why Choose This Mast** Cheaper poles: - Bend easily - Corrode over time - Lack stability 👉 This offers a **strong, practical solution for reliable installs**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to assemble --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mast clamps & brackets - Guy wire kits & tensioners - Base station antennas - Coax cable & connectors --- ### 🔥 **Order Today** **Strong mast. Easy setup. Built for reliable installations.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2020ft%20mast%20in%204%20swaged%20sections%20medium%20Duty%20Gauge%20Swaged%20Pole%20Set%20-%2020ft%20x%2038mm&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/20ft-mast-in-4-swaged-sections-medium-duty-gauge-swaged-pole-set-20ft-x-38mm/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [Cable guy Wire tensioner Rope Hook Eye Turn Buckle](https://cbradio.co.uk/product/cable-guy-wire-tensioner-rope-hook-eye-turn-buckle/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **Turnbuckle Wire Tensioner – Hook & Eye – Guy Rope Adjuster – Antenna / 4×4 Cable Tension** **Strong, Adjustable Tensioning – Built for Outdoor Use** This **hook & eye turnbuckle (wire tensioner)** is designed to **tighten and secure cables, guy wires, and ropes**, making it ideal for **antenna systems and 4×4 setups**. 👉 A simple but essential tool for **safe, stable installations**. --- ### ✅ **Key Features** ✔ **Hook & Eye Design** – quick and easy attachment ✔ **Adjustable Tension Control** – fine tune cable tightness ✔ **Heavy Duty Construction** – built for outdoor use ✔ **Corrosion Resistant Finish** ✔ **Reliable & Easy to Use** --- ### 📡 **Perfect For** - Antenna guy wire tensioning - CB & Ham radio mast setups - 4×4 windscreen protection cables - Roof rack cable systems - General DIY & workshop use --- ### 🚙 **4×4 & Off-Road Use** 👉 Ideal for cables running: - From **roof rack to bumper** - Protecting windscreens from branches - Keeping cables tight and secure --- ### ⚙️ **Specifications** - Type: **Turnbuckle / Wire Tensioner** - Design: **Hook & Eye** - Function: **Adjustable tensioning** - Use: **Wire / rope / cable tightening** --- ### ⚠️ **Why Use a Turnbuckle** Without proper tensioning: - Wires can sag - Masts become unstable - Cables can flap or fail 👉 This provides **precise adjustment and secure tension**. --- ### 💪 **Built for the Job** - Strong enough for **antenna guying systems** - Reliable in **outdoor and harsh conditions** - Simple to install and adjust --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Guy wire kits - Mast clamps & brackets - Base station antennas - Coax cable & connectors --- ### 🔥 **Order Today** **Tighten it properly. Keep it secure. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cable-guy-wire-tensioner-rope-hook-eye-turn-buckle/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cable-guy-wire-tensioner-rope-hook-eye-turn-buckle/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cable-guy-wire-tensioner-rope-hook-eye-turn-buckle/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cable-guy-wire-tensioner-rope-hook-eye-turn-buckle/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Cable%20guy%20Wire%20tensioner%20Rope%20Hook%20Eye%20Turn%20Buckle&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcable-guy-wire-tensioner-rope-hook-eye-turn-buckle%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cable-guy-wire-tensioner-rope-hook-eye-turn-buckle/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cable-guy-wire-tensioner-rope-hook-eye-turn-buckle/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cable-guy-wire-tensioner-rope-hook-eye-turn-buckle/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [NR-77b Short Covert Dual Band 2M / 70CM Closed Coil Mobile HAM Aerial VHF UHF](https://cbradio.co.uk/product/nr-77b-short-covert-dual-band-2m-70cm-closed-coil-mobile-ham-aerial-vhf-uhf/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **NR77B Dual Band Antenna 144/430MHz – 2m/70cm Compact Mobile Aerial – PL259 – 100W** **Compact Size • Strong Performance • Covert Design** The **NR77B Dual Band antenna** is a **short, high-performance mobile aerial** designed for **2m (144MHz) and 70cm (430MHz)** amateur radio bands, as well as **PMR 446 monitoring**. 👉 Ideal for users wanting **discreet installation without sacrificing performance**. --- ### ✅ **Key Features** ✔ **Dual Band Operation (2m / 70cm)** ✔ **Compact 43cm Length** – low profile, covert style ✔ **Pre-Tuned Antenna** – ready to use ✔ **Closed Centre Loading Coil** – improved durability ✔ **Strong Performance for Its Size** --- ### 📡 **Performance Highlights** - Covers **144 / 430 MHz bands** - **Low VSWR (<1.5:1)** for efficient transmission - **360° omnidirectional radiation** - Suitable for both **transmit and receive** 👉 Excellent choice for **mobile and discreet setups**. --- ### 🚗 **Perfect For** - Amateur (Ham) radio users - Mobile installations - PMR 446 monitoring - Vehicles where height is restricted - Discreet / covert antenna setups --- ### ⚙️ **Specifications** - Model: **NR77B** - Type: **5/8 Wave Mobile Antenna** - Frequency Range: **144 / 430 MHz** - VSWR: **< 1.5:1** - Gain: **2.15 dBi** - Max Power: **100 Watts** - Length: **0.43 Metres (43cm)** - Connector: **PL259 (UHF Male)** --- ### 💡 **Why Choose a Compact Antenna** Compared to longer antennas: - Less visible - Easier to install - Reduced wind resistance - Ideal for urban or daily driving 👉 A great balance of **size and performance**. --- ### ⚠️ **Important Notes** ❗ Ensure compatibility with your mount (PL259 connection) ❗ Performance depends on mounting position and ground plane --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mag mounts & boot mounts - Coax cable & connectors - SWR meters & tuning tools - Amateur radio accessories --- ### 🔥 **Order Today** **Small size. Strong signal. Built for everyday use.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/nr-77b-short-covert-dual-band-2m-70cm-closed-coil-mobile-ham-aerial-vhf-uhf/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/nr-77b-short-covert-dual-band-2m-70cm-closed-coil-mobile-ham-aerial-vhf-uhf/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/nr-77b-short-covert-dual-band-2m-70cm-closed-coil-mobile-ham-aerial-vhf-uhf/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/nr-77b-short-covert-dual-band-2m-70cm-closed-coil-mobile-ham-aerial-vhf-uhf/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20NR-77b%20Short%20Covert%20Dual%20Band%202M%20%2F%2070CM%20Closed%20Coil%20Mobile%20HAM%20Aerial%20VHF%20UHF&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fnr-77b-short-covert-dual-band-2m-70cm-closed-coil-mobile-ham-aerial-vhf-uhf%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/nr-77b-short-covert-dual-band-2m-70cm-closed-coil-mobile-ham-aerial-vhf-uhf/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/nr-77b-short-covert-dual-band-2m-70cm-closed-coil-mobile-ham-aerial-vhf-uhf/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/nr-77b-short-covert-dual-band-2m-70cm-closed-coil-mobile-ham-aerial-vhf-uhf/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [DIN in dash face plate mount for Alinco DR-135-DX DX-10 cb radio](https://cbradio.co.uk/product/din-in-dash-face-plate-mount-for-alinco-dr-135-dx-dx-10-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚗 **Metal DIN In-Dash Mount Face Plate – Alinco DR-135DX / DX-10 / President Johnson II / TTi 900** **Professional In-Dash Installation – Clean, Secure & Built to Last** This **all-metal DIN faceplate mount** allows you to install your **CB or amateur radio neatly into a standard dashboard slot**, giving a **factory-style finish** to your setup. 👉 Ideal for **cars, vans, and trucks** where a tidy install matters. --- ### ✅ **Why Choose This DIN Mount** ✔ **All Metal Construction** – strong, durable & long-lasting ✔ **Professional In-Dash Fit** – clean installation ✔ **Secure Mounting** – reduces vibration & movement ✔ **Superior to Cheap Plastic Versions** ✔ **Precision Fit for Compatible Radios** --- ### 📡 **Compatible With** - President Johnson II - Alinco DR-135 DX - Alinco DX-10 - TTi TCB-900 👉 May fit other radios with similar dimensions. --- ### ⚙️ **Specifications** - Type: **DIN In-Dash Mount / Faceplate** - Material: **All Metal Construction** - Slot Dimensions: **172 x 53 mm** - Fitment: **Standard Dashboard DIN Slot** --- ### 🔊 **Important Speaker Note** ❗ When installed in a DIN mount: 👉 The radio’s built-in speaker will be **covered** 👉 An **external speaker is recommended** for clear audio --- ### 🚗 **Perfect For** - Car installations - Vans & commercial vehicles - Trucks / HGV setups - Professional CB installs --- ### ⚠️ **Important Notes** ❗ **CB / Ham radio NOT included** ❗ Check compatibility and dimensions before purchase --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - External speakers - CB radios & accessories - Mounting kits & brackets - Coax cable & connectors --- ### 🔥 **Order Today** **Clean install. Solid fit. Professional finish.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/din-in-dash-face-plate-mount-for-alinco-dr-135-dx-dx-10-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/din-in-dash-face-plate-mount-for-alinco-dr-135-dx-dx-10-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/din-in-dash-face-plate-mount-for-alinco-dr-135-dx-dx-10-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/din-in-dash-face-plate-mount-for-alinco-dr-135-dx-dx-10-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DIN%20in%20dash%20face%20plate%20mount%20for%20Alinco%20DR-135-DX%20DX-10%20cb%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdin-in-dash-face-plate-mount-for-alinco-dr-135-dx-dx-10-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/din-in-dash-face-plate-mount-for-alinco-dr-135-dx-dx-10-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/din-in-dash-face-plate-mount-for-alinco-dr-135-dx-dx-10-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/din-in-dash-face-plate-mount-for-alinco-dr-135-dx-dx-10-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [15A Glass Fuse 10 x 32mm x 6mm Quick blow Pack of 10 Fuses](https://cbradio.co.uk/product/15a-glass-fuse-10-x-32mm-x-6mm-quick-blow-pack-of-10-fuses/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌⚡ **10x 20A Glass Fuses 32mm x 6mm – Quick Blow – Radio Fuse Pack – CB & Ham** **Reliable Protection for Your Equipment** This pack of **10 x 15A quick blow glass fuses** is ideal for protecting **CB radios, amateur radios, and other 12V equipment** from overloads and faults. 👉 A must-have for **spares, repairs, and maintenance**. --- ### ✅ **Key Features** ✔ **15 Amp Rating** – suitable for many radio applications ✔ **Quick Blow (Fast Acting)** – rapid protection against faults ✔ **Standard Size: 32mm x 6mm** ✔ **Clear Glass Body** – easy visual inspection ✔ **Pack of 10** – great value --- ### 📡 **Perfect For** - CB Radios - Amateur (Ham) Radios - Mobile radio installs - Power supplies - Automotive electrical systems --- ### ⚙️ **Specifications** - Type: **Glass Fuse (Quick Blow)** - Rating: **15 Amp** - Size: **32mm x 6mm** - Quantity: **Pack of 10** --- ### 🔧 **Compatible With** Suitable replacements for many radios including models from: - Kenwood - Yaesu - Icom 👉 Always check your equipment specifications before use. --- ### ⚠️ **Why Use Quality Fuses** Poor quality fuses: - Blow at incorrect ratings - Fail to protect equipment - Can cause damage 👉 These provide **reliable, consistent protection**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Fuse holders & power leads - CB radios & accessories - Coax cable & connectors - Electrical components --- ### 🔥 **Order Today** **Protect your gear. Keep it running. Stay connected.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/15a-glass-fuse-10-x-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/15a-glass-fuse-10-x-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/15a-glass-fuse-10-x-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/15a-glass-fuse-10-x-32mm-x-6mm-quick-blow-pack-of-10-fuses/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2015A%20Glass%20Fuse%2010%20x%2032mm%20x%206mm%20Quick%20blow%20Pack%20of%2010%20Fuses&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F15a-glass-fuse-10-x-32mm-x-6mm-quick-blow-pack-of-10-fuses%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/15a-glass-fuse-10-x-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/15a-glass-fuse-10-x-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/15a-glass-fuse-10-x-32mm-x-6mm-quick-blow-pack-of-10-fuses/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [10 x 20A Glass Fuse 32mm x 6mm Quick blow Pack of 10 Radio fuses](https://cbradio.co.uk/product/10-x-20a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-radio-fuses/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌⚡ **10x 20A Glass Fuses 32mm x 6mm – Quick Blow – Radio Fuse Pack – CB & Ham** **Reliable Protection for Your Equipment** This pack of **10 x 20A quick blow glass fuses** is ideal for protecting **CB radios, amateur radios, and other 12V equipment** from overloads and faults. 👉 A must-have for **spares, repairs, and maintenance**. --- ### ✅ **Key Features** ✔ **20 Amp Rating** – suitable for many radio applications ✔ **Quick Blow (Fast Acting)** – rapid protection against faults ✔ **Standard Size: 32mm x 6mm** ✔ **Clear Glass Body** – easy visual inspection ✔ **Pack of 10** – great value --- ### 📡 **Perfect For** - CB Radios - Amateur (Ham) Radios - Mobile radio installs - Power supplies - Automotive electrical systems --- ### ⚙️ **Specifications** - Type: **Glass Fuse (Quick Blow)** - Rating: **20 Amp** - Size: **32mm x 6mm** - Quantity: **Pack of 10** --- ### 🔧 **Compatible With** Suitable replacements for many radios including models from: - Kenwood - Yaesu - Icom 👉 Always check your equipment specifications before use. --- ### ⚠️ **Why Use Quality Fuses** Poor quality fuses: - Blow at incorrect ratings - Fail to protect equipment - Can cause damage 👉 These provide **reliable, consistent protection**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Fuse holders & power leads - CB radios & accessories - Coax cable & connectors - Electrical components --- ### 🔥 **Order Today** **Protect your gear. Keep it running. Stay connected.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/10-x-20a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-radio-fuses/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/10-x-20a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-radio-fuses/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/10-x-20a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-radio-fuses/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/10-x-20a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-radio-fuses/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2010%20x%2020A%20Glass%20Fuse%2032mm%20x%206mm%20Quick%20blow%20Pack%20of%2010%20Radio%20fuses&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F10-x-20a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-radio-fuses%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/10-x-20a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-radio-fuses/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/10-x-20a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-radio-fuses/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/10-x-20a-glass-fuse-32mm-x-6mm-quick-blow-pack-of-10-radio-fuses/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [Extension Speaker and DIN plate in dash Mount Midland 48 Intek TTi 881 CB Radio](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-midland-48-intek-tti-881-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚗 **DIN Mount + Extension Speaker Kit – CB Radio In-Dash Install – TTi 880 / Midland 48 / Intek** **Professional Fit & Clear Audio – Complete DIN Installation Solution** This **DIN mount and extension speaker kit** allows you to install your **CB radio neatly into a dashboard DIN slot**, while ensuring **clear audio output** when the internal speaker is covered. 👉 Ideal for a **clean, factory-style installation** in cars, vans, and trucks. --- ### ✅ **What’s Included** ✔ **All-Metal DIN Mount / Faceplate** ✔ **External Extension Speaker** ✔ **Ready for In-Dash Installation** --- ### 💪 **Why Choose This Kit** ✔ **Heavy Duty All Metal Construction** – strong & long-lasting ✔ **Professional In-Dash Fit** – tidy installation ✔ **External Speaker Included** – restores clear sound ✔ **Better Than Cheap Plastic Versions** ✔ **Secure, Vibration-Free Mounting** --- ### 📡 **Compatible With** - TTi 880 / 881 - Midland 48 / 248 - Intek M-150 / 490 / 495 / 550 / 760 / 899 👉 May fit other radios with similar dimensions. --- ### ⚙️ **Specifications** - Type: **DIN Mount + External Speaker Kit** - Material: **All Metal Construction** - Slot Dimensions: **154.5 x 51 mm** - Fitment: **Dashboard DIN Slot** --- ### 🔊 **Why You Need the Extension Speaker** When installing in a DIN slot: - The radio’s speaker becomes **covered** - Audio becomes **muffled or unclear** 👉 This kit includes an **external speaker** for **clear, loud audio**. --- ### 🚗 **Perfect For** - Cars & vans - Trucks / HGVs - Commercial vehicles - Professional CB installs --- ### ⚠️ **Important Notes** ❗ **CB Radio NOT included** ❗ Check compatibility and dimensions before purchase --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - Antennas & mounts - Coax cable & connectors - SWR meters & tuning tools --- ### 🔥 **Order Today** **Clean install. Clear sound. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-midland-48-intek-tti-881-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-midland-48-intek-tti-881-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-midland-48-intek-tti-881-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-midland-48-intek-tti-881-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Extension%20Speaker%20and%20DIN%20plate%20in%20dash%20Mount%20Midland%2048%20Intek%20TTi%20881%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fextension-speaker-and-din-plate-in-dash-mount-midland-48-intek-tti-881-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-midland-48-intek-tti-881-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-midland-48-intek-tti-881-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-midland-48-intek-tti-881-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [Handscan telescopic radio scanner antenna aerial with centre loading coil BNC](https://cbradio.co.uk/product/handscan-telescopic-radio-scanner-antenna-aerial-with-centre-loading-coil-bnc/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡📻 **Telescopic Scanner Antenna BNC – Wideband 25–1300MHz – 2m/70cm Handheld Aerial with Coil** **Compact • Adjustable • Wideband Performance** This **telescopic handheld scanner antenna** with **centre loading coil** is designed for **wideband reception** and **amateur band use**, making it a versatile upgrade over standard rubber antennas. 👉 Adjustable length for **optimised performance across multiple frequencies**. --- ### ✅ **Key Features** ✔ **Wideband Coverage (25–1300 MHz RX)** ✔ **Telescopic Design** – adjustable for best signal ✔ **Centre Loading Coil** – improved efficiency ✔ **BNC Connector** – direct fit for many scanners ✔ **Compact & Portable** --- ### 📡 **Performance & Flexibility** - Strong reception across **airband, VHF & UHF** - Adjustable length helps **tune for different bands** - Suitable for both **scanner use and amateur handhelds** --- ### 🎯 **Perfect For** - Scanner users - Airband listening - Amateur radio (2m / 70cm) - General wideband monitoring - Portable radio setups --- ### ⚙️ **Specifications** - Type: **Telescopic Scanner Antenna (Centre Loaded)** - Frequency Range (RX): **25–1300 MHz** - Frequency (TX): - **144–150 MHz (2m)** - **430–450 MHz (70cm)** - Design: **1/4 Wave Reduced Length** - Extended Length: **66 cm** - Connector: **BNC Male** --- ### ⚠️ **Important Notes** ❗ Transmit only where legally permitted ❗ Performance varies depending on extension length and frequency --- ### 💡 **Why Upgrade from Stock Antennas** Standard antennas: - Limited bandwidth - Poor reception on distant signals 👉 This telescopic antenna gives you **greater flexibility and improved signal pickup**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Scanner radios - BNC adaptors & cables - Base antennas - CB & Ham accessories --- ### 🔥 **Order Today** **Adjust it. Tune it. Hear more** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/handscan-telescopic-radio-scanner-antenna-aerial-with-centre-loading-coil-bnc/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/handscan-telescopic-radio-scanner-antenna-aerial-with-centre-loading-coil-bnc/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/handscan-telescopic-radio-scanner-antenna-aerial-with-centre-loading-coil-bnc/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/handscan-telescopic-radio-scanner-antenna-aerial-with-centre-loading-coil-bnc/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Handscan%20telescopic%20radio%20scanner%20antenna%20aerial%20with%20centre%20loading%20coil%20BNC&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhandscan-telescopic-radio-scanner-antenna-aerial-with-centre-loading-coil-bnc%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/handscan-telescopic-radio-scanner-antenna-aerial-with-centre-loading-coil-bnc/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/handscan-telescopic-radio-scanner-antenna-aerial-with-centre-loading-coil-bnc/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/handscan-telescopic-radio-scanner-antenna-aerial-with-centre-loading-coil-bnc/?share=telegram) - **Product categories:** Scanners and Aerials --- ### [g5rv full size thick copper polyweave heavy duty 102ft 80m - 10m antenna aerial](https://cbradio.co.uk/product/g5rv-full-size-thick-copper-polyweave-heavy-duty-102ft-80m-10m-antenna-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🏠 **Heavy Duty G5RV HF Dipole Antenna – 10–80m – 102ft – 500W – Ladder Line – SO239 – UK Made** **Serious HF Performance – Built Stronger Than Standard G5RV’s** This **high-quality heavy duty G5RV antenna** is designed for **reliable HF operation across 10–80 metres**, using **thick stranded copper with durable poly weave insulation**. 👉 Built tougher than standard G5RV antennas – **stronger, longer lasting, and better suited for outdoor use**. --- ### 💪 **Heavy Duty Construction** ✔ **Thick Stranded Copper Conductors** – improved strength & conductivity ✔ **Poly Weave Insulation + PVC Coating** – extra durability ✔ **Large Dog Bone Insulators** – strong end supports ✔ **Built for Long-Term Outdoor Installations** --- ### 📡 **Wide Band HF Coverage** - Covers **10m to 80m bands (3.5 – 30 MHz)** - Naturally **resonant on 20m (14 MHz)** - Excellent multi-band performance with tuner 👉 A **classic all-round HF antenna**. --- ### ✅ **Key Features** ✔ **102ft Full Size Dipole** ✔ **30.6ft Ladder Line Feed** ✔ **SO239 Socket for Coax Connection** ✔ **Up to 500W Power Handling** ✔ **Heavy Duty Build – Not a Lightweight Copy** ✔ **Made in the UK 🇬🇧** --- ### ⚙️ **Specifications** - Type: **G5RV HF Dipole Antenna** - Frequency Range: **3.5 – 30 MHz (10–80m bands)** - Resonant Frequency: **14 MHz (20m band)** - Dipole Length: **102 ft (31.1m)** - Ladder Line Length: **30.6 ft (9.3m)** - Power Handling: **Up to 500 Watts** - Connector: **SO239 (UHF Female)** - Weight: **Approx. 1.3 kg** --- ### 🏠 **Perfect For** - Amateur (Ham) radio operators - HF base stations - Multi-band setups - Garden or field installations --- ### ⚠️ **Why Choose This Over Standard G5RV’s** Cheap versions: - Use thin wire - Stretch or snap over time - Degrade outdoors 👉 This version uses **thick stranded copper with protective coating** for **long-term reliability**. --- ### 📦 **UK Stock – Fast Dispatch** ✔ No long overseas wait ✔ No import charges ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable & connectors - Baluns & antenna tuners - Mast & mounting hardware - SWR meters --- ### 🔥 **Order Today** **Stronger build. Better performance. Ready for HF.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/g5rv-full-size-thick-copper-polyweave-heavy-duty-102ft-80m-10m-antenna-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/g5rv-full-size-thick-copper-polyweave-heavy-duty-102ft-80m-10m-antenna-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/g5rv-full-size-thick-copper-polyweave-heavy-duty-102ft-80m-10m-antenna-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/g5rv-full-size-thick-copper-polyweave-heavy-duty-102ft-80m-10m-antenna-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20g5rv%20full%20size%20thick%20copper%20polyweave%20heavy%20duty%20102ft%2080m%20-%2010m%20antenna%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fg5rv-full-size-thick-copper-polyweave-heavy-duty-102ft-80m-10m-antenna-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/g5rv-full-size-thick-copper-polyweave-heavy-duty-102ft-80m-10m-antenna-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/g5rv-full-size-thick-copper-polyweave-heavy-duty-102ft-80m-10m-antenna-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/g5rv-full-size-thick-copper-polyweave-heavy-duty-102ft-80m-10m-antenna-aerial/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Banana Plugs Pair Gold plated High Quality Stack able](https://cbradio.co.uk/product/banana-plugs-pair-gold-plated-high-quality-stack-able/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌🔴⚫ **Gold Plated Banana Plugs 4mm – Stackable – High Quality – Pair (Red/Black Optional)** **Premium Connectors – Strong, Reliable & Versatile** This pair of **high-quality 4mm banana plugs** features **gold-plated contacts** for excellent conductivity and long-term reliability. 👉 Ideal for **audio, test equipment, power supplies, and DIY projects**. --- ### ✅ **Key Features** ✔ **Gold Plated Contacts** – improved conductivity & corrosion resistance ✔ **4mm Standard Size** – fits most sockets ✔ **Stackable Design** – allows multiple connections ✔ **High Quality Construction** – durable and reliable ✔ **Supplied as a Pair** --- ### 🎨 **Colour Options** - Supplied with **red identification rings** - Rings can be **removed** if not required 👉 Allows flexible colour coding (red/black setups) --- ### 🔌 **Perfect For** - Audio speaker connections - Bench power supplies - Test leads & multimeters - Electronics projects - Laboratory setups --- ### ⚙️ **Specifications** - Type: **4mm Banana Plug (Stackable)** - Plating: **Gold Plated** - Diameter: **4mm Standard** - Quantity: **2 Plugs (1 Pair)** - Colour: **Red (removable ring)** --- ### 💡 **Why Choose Gold Plated Plugs** - Better electrical contact - Reduced signal loss - Corrosion resistant - Long-lasting performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Test leads & connectors - Power plugs & adaptors - CB & radio accessories - DIY electronics components --- ### 🔥 **Order Today** **Clean connection. Strong signal. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/banana-plugs-pair-gold-plated-high-quality-stack-able/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/banana-plugs-pair-gold-plated-high-quality-stack-able/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/banana-plugs-pair-gold-plated-high-quality-stack-able/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/banana-plugs-pair-gold-plated-high-quality-stack-able/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Banana%20Plugs%20Pair%20Gold%20plated%20High%20Quality%20Stack%20able&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fbanana-plugs-pair-gold-plated-high-quality-stack-able%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/banana-plugs-pair-gold-plated-high-quality-stack-able/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/banana-plugs-pair-gold-plated-high-quality-stack-able/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/banana-plugs-pair-gold-plated-high-quality-stack-able/?share=telegram) - **Product categories:** RF Adaptors --- ### [Extension Speaker and DIN plate in dash Mount Team Midland Intek TTi CB Radio](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-team-midland-intek-tti-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚗 **DIN Mount + Extension Speaker Kit – CB Radio In-Dash Install – TTi / Midland / Team / Intek** **Professional Fit & Clear Audio – Complete Installation Solution** This **DIN mount and extension speaker kit** allows you to install your **CB radio neatly into a dashboard DIN slot**, while ensuring **clear, usable audio** when the built-in speaker is covered. 👉 Perfect for a **clean, factory-style installation** in cars, vans, and trucks. --- ### ✅ **What’s Included** ✔ **All-Metal DIN Mount / Faceplate** ✔ **External Extension Speaker** ✔ **Ready for In-Dash Installation** --- ### 💪 **Why Choose This Kit** ✔ **Heavy Duty All Metal Construction** – strong & durable ✔ **Professional In-Dash Fit** – tidy installation ✔ **External Speaker Included** – solves muffled audio issue ✔ **Superior to Cheap Plastic Versions** ✔ **Secure, Vibration-Free Mounting** --- ### 📡 **Compatible With** - TTi 550 / 560 - TTi 565 - Midland 38 / 98 / 203 - Team TS6 - Intek Models 👉 May fit other radios with similar dimensions. --- ### ⚙️ **Specifications** - Type: **DIN Mount + External Speaker Kit** - Material: **All Metal Construction** - Slot Dimensions: **124 x 38 mm** - Fitment: **Dashboard DIN Slot** --- ### 🔊 **Why You Need the Extension Speaker** When installing a CB radio in a DIN mount: - The built-in speaker becomes **covered** - Audio becomes **muffled or unclear** 👉 This kit includes an **external speaker** for **clear, loud sound**. --- ### 🚗 **Perfect For** - Cars & vans - Trucks / HGVs - Commercial vehicle installs - Clean dashboard setups --- ### ⚠️ **Important Notes** ❗ **CB Radio NOT included** ❗ Check dimensions before purchase ❗ External speaker included for proper audio output --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - Antennas & mounts - Coax cable & connectors - SWR meters & tuning tools --- ### 🔥 **Order Today** **Clean install. Clear sound. Built properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-team-midland-intek-tti-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-team-midland-intek-tti-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-team-midland-intek-tti-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-team-midland-intek-tti-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Extension%20Speaker%20and%20DIN%20plate%20in%20dash%20Mount%20Team%20Midland%20Intek%20TTi%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fextension-speaker-and-din-plate-in-dash-mount-team-midland-intek-tti-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-team-midland-intek-tti-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-team-midland-intek-tti-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/extension-speaker-and-din-plate-in-dash-mount-team-midland-intek-tti-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [mic plugs 4 pin ham or cb radio microphone plugs pack of 3](https://cbradio.co.uk/product/mic-plugs-4-pin-ham-or-cb-radio-microphone-plugs-pack-of-3/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔌 **3x 4 Pin Microphone Plugs – CB & Ham Radio Mic Connectors – Replacement for Uniden / Cybernet** **Essential Mic Connectors – Perfect for Repairs & Custom Leads** This **economy pack of 3 x 4-pin microphone plugs** is ideal for **repairing, replacing, or building mic leads** for CB and amateur radio equipment. 👉 A must-have for any **radio enthusiast or workshop**. --- ### ✅ **Key Features** ✔ **Pack of 3 Microphone Plugs** ✔ **Standard 4 Pin Configuration** ✔ **Ideal Replacement or Repair Part** ✔ **Solder Type Connections** ✔ **Durable Construction** --- ### 🎤 **Compatible With** - Most **Cybernet-based CB radios** - Many **Uniden CB radios** - Other **4 pin microphone radios** 👉 Always check your radio uses a **standard 4 pin mic connection**. --- ### 📡 **Perfect For** - Mic repairs - Custom microphone leads - Workshop spares - CB & Ham radio setups --- ### ⚙️ **Specifications** - Type: **4 Pin Microphone Plug** - Connection: **Solder Type** - Configuration: **Standard 4 Pin** - Quantity: **Pack of 3** --- ### 🛠 **Installation Notes** - Requires soldering - Ensure correct pin wiring for your radio model - Suitable for most standard mic wiring setups --- ### ⚠️ **Why Keep Spares** Mic plugs can: - Wear out over time - Break at cable joints - Cause poor audio if damaged 👉 Having spares ensures **quick repairs and minimal downtime**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - Microphones & accessories - Extension leads & sockets - CB radios & antennas - Connectors & adaptors --- ### 🔥 **Order Today** **Fix it fast. Keep talking. Stay connected.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mic-plugs-4-pin-ham-or-cb-radio-microphone-plugs-pack-of-3/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mic-plugs-4-pin-ham-or-cb-radio-microphone-plugs-pack-of-3/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mic-plugs-4-pin-ham-or-cb-radio-microphone-plugs-pack-of-3/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mic-plugs-4-pin-ham-or-cb-radio-microphone-plugs-pack-of-3/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mic%20plugs%204%20pin%20ham%20or%20cb%20radio%20microphone%20plugs%20pack%20of%203&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmic-plugs-4-pin-ham-or-cb-radio-microphone-plugs-pack-of-3%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mic-plugs-4-pin-ham-or-cb-radio-microphone-plugs-pack-of-3/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mic-plugs-4-pin-ham-or-cb-radio-microphone-plugs-pack-of-3/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mic-plugs-4-pin-ham-or-cb-radio-microphone-plugs-pack-of-3/?share=telegram) - **Product categories:** Microphone Plugs --- ### [antenna mast coupler pole doubler clamp 2" 50mm inline 10 bolts](https://cbradio.co.uk/product/antenna-mast-coupler-pole-doubler-clamp-2-50mm-inline-10-bolts/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **2″ Mast Coupler Clamp – 50mm Pole Doubler – Heavy Duty Inline Joiner – 10 Bolt Galvanised** **Join Two Masts Securely – Strong, Stable & Built to Last** This **heavy-duty 2″ (50mm) mast coupler** allows you to **join two aerial masts inline**, creating a **longer, stronger pole setup** for your antenna installation. 👉 Designed for **maximum strength and stability**, secured with **10 bolts (5 each side)**. --- ### 💪 **Heavy Duty Construction** ✔ **10 Bolt Clamping System** – ultra secure hold ✔ **High Grade Steel Build** – strong and reliable ✔ **Hot Dip Galvanised Finish** – corrosion resistant ✔ **2.5mm Thick Metal** – built for demanding installations --- ### ✅ **Key Features** ✔ **Joins Two 2″ (50mm) Masts Inline** ✔ **Deep Insertion (185mm per side)** – added strength ✔ **Long Coupler Body (380mm)** – improved stability ✔ **Suitable for Permanent Outdoor Installations** --- ### 📡 **Perfect For** - CB Base Station Antennas - Amateur (Ham) Radio Installations - TV Aerial Mast Extensions - Farm & Workshop Setups - Increasing mast height safely --- ### ⚙️ **Specifications** - Type: **Mast Coupler / Pole Joiner** - Diameter: **2″ (50mm)** - Connection A: **2″ Mast Socket** - Connection B: **2″ Mast Socket** - Total Length: **380mm (15″)** - Insertion Depth: **185mm per side (7.5″)** - Material: **High Grade Steel** - Finish: **Hot Dip Galvanised** - Thickness: **2.5mm** - Fixing: **10 Bolt Clamp System** --- ### ⚠️ **Important Installation Advice** ❗ When joining masts, **guying is strongly recommended** 👉 Helps prevent movement and ensures long-term stability --- ### 💪 **Why Choose This Coupler** Cheap couplers: - Flex under load - Corrode quickly - Fail in strong winds 👉 This is a **serious heavy-duty solution for professional installs**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mast clamps & brackets - Base station antennas - Coax cable & connectors - Guy wire kits & accessories --- ### 🔥 **Order Today** **Join stronger. Mount higher. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/antenna-mast-coupler-pole-doubler-clamp-2-50mm-inline-10-bolts/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/antenna-mast-coupler-pole-doubler-clamp-2-50mm-inline-10-bolts/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/antenna-mast-coupler-pole-doubler-clamp-2-50mm-inline-10-bolts/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/antenna-mast-coupler-pole-doubler-clamp-2-50mm-inline-10-bolts/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20antenna%20mast%20coupler%20pole%20doubler%20clamp%202%22%2050mm%20inline%2010%20bolts&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fantenna-mast-coupler-pole-doubler-clamp-2-50mm-inline-10-bolts%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/antenna-mast-coupler-pole-doubler-clamp-2-50mm-inline-10-bolts/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/antenna-mast-coupler-pole-doubler-clamp-2-50mm-inline-10-bolts/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/antenna-mast-coupler-pole-doubler-clamp-2-50mm-inline-10-bolts/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [Extension Speaker and DIN in dash Mount TTI Midland Intek Danita CB Radios](https://cbradio.co.uk/product/extension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚗 **DIN Mount + Extension Speaker Kit – CB Radio In-Dash Install – TTi / Midland / Danita** **Clean Install + Clear Audio – Complete DIN Solution** This **DIN mount and extension speaker kit** allows you to install your **CB radio neatly into a dashboard slot**, while ensuring **clear audio output** when the built-in speaker is covered. 👉 A **professional, all-in-one solution** for a tidy and functional install. --- ### ✅ **What’s Included** ✔ **All-Metal DIN Mount / Faceplate** ✔ **External Extension Speaker** ✔ **Ready for Clean In-Dash Installation** --- ### 💪 **Why Choose This Kit** ✔ **All Metal Construction** – strong, durable & long-lasting ✔ **Professional In-Dash Fit** – factory-style finish ✔ **External Speaker Included** – solves covered speaker issue ✔ **Better Than Cheap Plastic Versions** ✔ **Secure, Vibration-Free Mounting** --- ### 📡 **Compatible With** - TTi 770 / 771 - TTi 660 - Midland 78 - Danita 3000 Multi 👉 May fit other radios with similar dimensions. --- ### ⚙️ **Specifications** - Type: **DIN Mount + External Speaker Kit** - Mount Material: **All Metal Construction** - Slot Dimensions: **140 x 37 mm** - Fitment: **Dashboard DIN Slot** --- ### 🔊 **Why You Need the Extension Speaker** When using a DIN mount: - The radio’s built-in speaker is often **blocked** - Audio becomes **muffled or unclear** 👉 This kit includes an **external speaker** for **clear, loud audio**. --- ### 🚗 **Perfect For** - Cars & vans - Trucks / HGVs - Professional CB installs - Clean dashboard setups --- ### ⚠️ **Important Notes** ❗ **CB Radio NOT included** ❗ Check dimensions before purchase ❗ External speaker included for optimal audio --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - CB radios - Antennas & mounts - Coax cable & connectors - SWR meters & tuning tools --- ### 🔥 **Order Today** **Clean install. Clear sound. Professional finish.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/extension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/extension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/extension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/extension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Extension%20Speaker%20and%20DIN%20in%20dash%20Mount%20TTI%20Midland%20Intek%20Danita%20CB%20Radios&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fextension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/extension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/extension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/extension-speaker-and-din-in-dash-mount-tti-midland-intek-danita-cb-radios/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [6v Battery pack holds 4 AA Cells Clip Holder Box Case white UK seller](https://cbradio.co.uk/product/6v-battery-pack-holds-4-aa-cells-clip-holder-box-case-white-uk-seller/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔋🔌 **6V Battery Holder (4x AA) – Inline Case – High Quality ABS – DIY Power Pack** **Reliable Power Solution for Projects & Repairs** This **6V battery holder** is designed to hold **4 x AA batteries**, providing a **compact and dependable power source** for a wide range of applications. 👉 Made from **high-quality ABS plastic** – far more durable than cheap alternatives. --- ### ✅ **Key Features** ✔ **Holds 4 x AA Batteries (6V Output)** ✔ **Durable ABS Plastic Construction** ✔ **Compact & Lightweight Design** ✔ **Easy Wire Connection** ✔ **Ideal for DIY Projects & Repairs** --- ### 🔋 **Perfect For** - Electronics projects - CB & radio accessories - LED lighting setups - Hobby builds - Replacement battery packs --- ### ⚙️ **Specifications** - Type: **Battery Holder / Battery Case** - Capacity: **4 x AA Batteries** - Output Voltage: **6V (depending on batteries used)** - Material: **High Quality ABS Plastic** - Connection: **Wire Leads** *(if applicable – adjust if needed)* --- ### ⚠️ **Important Notes** ❗ **Batteries NOT included** ❗ Listing is for **1 x battery holder only** --- ### 💪 **Why Choose This Holder** Cheap holders: - Crack easily - Have poor contacts - Fail over time 👉 This unit provides a **solid, reliable power connection**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - Battery connectors & holders - Wiring & power accessories - CB & radio equipment - DIY components --- ### 🔥 **Order Today** **Simple. Reliable. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/6v-battery-pack-holds-4-aa-cells-clip-holder-box-case-white-uk-seller/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/6v-battery-pack-holds-4-aa-cells-clip-holder-box-case-white-uk-seller/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/6v-battery-pack-holds-4-aa-cells-clip-holder-box-case-white-uk-seller/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/6v-battery-pack-holds-4-aa-cells-clip-holder-box-case-white-uk-seller/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%206v%20Battery%20pack%20holds%204%20AA%20Cells%20Clip%20Holder%20Box%20Case%20white%20UK%20seller&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F6v-battery-pack-holds-4-aa-cells-clip-holder-box-case-white-uk-seller%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/6v-battery-pack-holds-4-aa-cells-clip-holder-box-case-white-uk-seller/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/6v-battery-pack-holds-4-aa-cells-clip-holder-box-case-white-uk-seller/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/6v-battery-pack-holds-4-aa-cells-clip-holder-box-case-white-uk-seller/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [small Yellow springer Tornado stinger CB radio Aerial Right angle rail mount](https://cbradio.co.uk/product/small-yellow-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🟡🚜 **JCB Yellow Mini Springer CB Aerial + Right Angle Mirror / Rail Mount – 27MHz 4×4 Tractor Kit** **Built for Work Vehicles – Tough, Reliable & Ready to Fit** This **JCB Yellow Mini Springer CB aerial kit** includes a **heavy duty right-angle mirror / rail mount**, making it the ideal setup for **tractors, plant machinery, 4x4s, and commercial vehicles**. 👉 Designed to **match your machinery** while delivering **dependable CB performance**. --- ### 🎨 **JCB Yellow Finish** ✔ Perfect match for **JCB machinery & plant equipment** ✔ High-visibility colour for working environments ✔ Clean, professional look --- ### ✅ **Complete Kit – Ready to Install** ✔ **Mini Springer CB Aerial (Pre-Tuned)** ✔ **Heavy Duty Right Angle Mirror / Rail Mount** ✔ **3/8 Stud Fitting – fits most CB antennas** ✔ **Approx. 4m Coax Cable Included** ✔ **PL259 Connector (Radio End)** --- ### 📡 **Mini Springer – Compact & Heavy Duty** - **Base loaded spring design** – absorbs shocks & vibration - **Powder coated stainless steel whip** - Strong **steel coil construction** - Built for **harsh working environments** 👉 **Virtually indestructible design**. --- ### 🔧 **Right Angle Mirror / Rail Mount** - Ideal for **mirror arms, rails, and roof racks** - Strong clamp system for **secure installation** - Designed for **off-road and industrial use** --- ### 🚜 **Perfect For** - JCB machinery & plant equipment - Tractors & agricultural vehicles - 4×4 & off-road vehicles - Vans & commercial vehicles - Trucks / HGVs --- ### ⚙️ **Antenna Specifications** - Type: **Mini Springer / Stinger CB Aerial** - Frequency: **27–28 MHz** - Length: **Approx. 89cm** - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8” Thread** - Build: **Powder Coated Stainless Whip + Steel Coil** - Pre-Tuned: **Yes** --- ### ⚠️ **Why Choose This Kit** Cheaper kits: - Don’t last in tough conditions - Have weak mounts - Deliver poor signal 👉 This is a **heavy-duty, proven setup built for real working environments**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Colours Available** 👉 Check our shop for: - Green (John Deere style) - Black, Red, Blue - Desert Sand & more --- ### 🔥 **Order Today** **Matches your machine. Built for the job. Ready to work.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/small-yellow-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/small-yellow-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/small-yellow-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/small-yellow-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20small%20Yellow%20springer%20Tornado%20stinger%20CB%20radio%20Aerial%20Right%20angle%20rail%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsmall-yellow-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/small-yellow-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/small-yellow-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/small-yellow-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [small black Springer CB radio Aerial with Right angle rail roof rack mount](https://cbradio.co.uk/product/small-black-springer-cb-radio-aerial-with-right-angle-rail-roof-rack-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🟢🚜 **Mini Black Springer CB Aerial + Right Angle Mirror / Rail Mount – 27MHz 4×4 Tractor Kit** **Complete Antenna & Mount Kit – Built for Work Vehicles** This **Mini Black Springer CB aerial kit** includes a **heavy-duty right angle mirror / roof rack mount**, making it the perfect solution for **tractors, 4x4s, vans, and trucks**. 👉 Ideal for those who **already have a CB radio** and need a **reliable antenna setup**. --- ### 🎨 **Black Finish – Built to Match Your Machine** ✔ Ideal for **agricultural vehicles (John Deere style)** ✔ Clean, professional look ✔ Other colours available – see our shop --- ### ✅ **Complete Kit – Ready to Fit** ✔ **Mini Springer CB Aerial (Pre-Tuned)** ✔ **Heavy Duty Right Angle Mirror / Rail Mount** ✔ **3/8 Stud Fitting – fits most CB antennas** ✔ **Approx. 4m Coax Cable Included** ✔ **PL259 Connector (Radio End)** --- ### 📡 **Mini Springer – Compact & Tough** - **Base loaded spring design** – absorbs knocks & vibration - **Powder coated stainless steel whip** - Durable **steel coil construction** - Designed for **real working environments** 👉 **Virtually indestructible**. --- ### 🔧 **Heavy Duty Right Angle Mount** - Ideal for **mirror arms, rails & roof racks** - Strong clamp design for **secure fitment** - Built for **harsh conditions and daily use** --- ### 🚜 **Perfect For** - Tractors & agricultural machinery - 4×4 & off-road vehicles - Vans & commercial vehicles - Trucks / HGVs --- ### ⚙️ **Antenna Specifications** - Type: **Mini Springer / Stinger CB Aerial** - Frequency: **27–28 MHz** - Length: **Approx. 89cm** - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8” Thread** - Build: **Powder Coated Stainless Whip + Steel Coil** - Pre-Tuned: **Yes** --- ### ⚠️ **Why Choose This Kit** Cheap setups: - Have weak mounts - Don’t last in tough environments - Deliver poor signal 👉 This is a **proven, heavy-duty setup built for real work use**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Options Available** 👉 Check our shop for: - Other colour springers - Mag mounts & boot mounts - Coax cable & connectors - SWR meters & accessories --- ### 🔥 **Order Today** **Strong mount. Tough aerial. Ready for the job.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/small-black-springer-cb-radio-aerial-with-right-angle-rail-roof-rack-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/small-black-springer-cb-radio-aerial-with-right-angle-rail-roof-rack-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/small-black-springer-cb-radio-aerial-with-right-angle-rail-roof-rack-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/small-black-springer-cb-radio-aerial-with-right-angle-rail-roof-rack-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20small%20black%20Springer%20CB%20radio%20Aerial%20with%20Right%20angle%20rail%20roof%20rack%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsmall-black-springer-cb-radio-aerial-with-right-angle-rail-roof-rack-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/small-black-springer-cb-radio-aerial-with-right-angle-rail-roof-rack-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/small-black-springer-cb-radio-aerial-with-right-angle-rail-roof-rack-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/small-black-springer-cb-radio-aerial-with-right-angle-rail-roof-rack-mount/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [small green springer Tornado stinger CB radio Aerial & Right angle rail mount](https://cbradio.co.uk/product/small-green-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🟢🚜 **John Deere Green Mini Springer CB Aerial + Right Angle Mirror Mount – 4×4 Tractor Kit – 27MHz** **Perfect Match for Your Machinery – Built Tough for Real Work** This **John Deere Green Mini Springer CB aerial kit** comes complete with a **heavy duty right-angle mirror mount**, making it the perfect setup for **tractors, 4x4s, and agricultural vehicles**. 👉 Designed to **match your machinery** while delivering **reliable CB performance**. --- ### 🎨 **John Deere Green Finish** ✔ **Custom Green Colour** – ideal for John Deere tractors & equipment ✔ Stands out while maintaining a **clean, professional look** --- ### ✅ **Complete Kit – Ready to Install** ✔ **Mini Springer CB Aerial (Pre-Tuned)** ✔ **Heavy Duty Right Angle Mirror / Rail Mount** ✔ **3/8 Stud Fitting – fits most CB antennas** ✔ **Coax Cable Included (approx. 4m)** ✔ **PL259 Connector (Radio End)** --- ### 📡 **Mini Springer – Compact & Tough** - **Base loaded spring design** – absorbs knocks & vibration - **Powder coated stainless steel whip** - Durable **steel coil construction** - Built for **daily agricultural and off-road use** 👉 **Virtually indestructible design**. --- ### 🚛 **Heavy Duty Right Angle Mount** - Ideal for **mirror arms, rails, and frames** - Strong and stable mounting - Designed for **harsh working environments** --- ### 🚜 **Perfect For** - John Deere tractors - Agricultural machinery - 4×4 & off-road vehicles - Trucks / HGVs - Farm & workshop setups --- ### ⚙️ **Antenna Specifications** - Type: **Mini Springer / Stinger CB Aerial** - Frequency: **27–28 MHz** - Length: **Approx. 89cm** - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **3/8” Thread** - Build: **Powder Coated Stainless Whip + Steel Coil** - Pre-Tuned: **Yes** --- ### ⚠️ **Why Choose This Kit** Cheap kits: - Don’t last in tough environments - Have weak mounts - Perform poorly 👉 This is a **heavy-duty, proven setup built for real working conditions**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - SWR meters & tuning tools - CB radios - Coax cable & connectors - Additional mounts & accessories --- ### 🔥 **Order Today** **Matches your machine. Built for the job. Ready to work.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/small-green-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/small-green-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/small-green-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/small-green-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20small%20green%20springer%20Tornado%20stinger%20CB%20radio%20Aerial%20%26%20Right%20angle%20rail%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsmall-green-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/small-green-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/small-green-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/small-green-springer-tornado-stinger-cb-radio-aerial-right-angle-rail-mount/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [PL258 Double Female coax Joiner Coupler for PL259 Connectors](https://cbradio.co.uk/product/pl258-double-female-coax-joiner-coupler-for-pl259-connectors/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **PL258 Double Female Coupler – UHF Coax Joiner – SO239 Barrel Connector for PL259 Leads** **Simple, Reliable Way to Join Coax Cables** The **PL258 (SO239) double female coupler** is designed to **join two PL259 connectors**, allowing you to extend or connect coax cables quickly and securely. 👉 A must-have for **CB and amateur radio setups**. --- ### ✅ **Key Features** ✔ **Double Female (SO239) Coupler** – joins two PL259 plugs ✔ **50 Ohm Impedance** – ideal for CB & Ham radio ✔ **All Metal Construction** – strong and durable ✔ **Bright Plated Finish** – corrosion resistant ✔ **PTFE (Teflon) Insulator** – heat resistant & reliable --- ### 📡 **Perfect For** - Extending coax cable runs - Joining two PL259 leads - CB Radio Installations - Amateur (Ham) Radio - Workshop & DIY setups --- ### ⚙️ **Specifications** - Type: **PL258 / SO239 Coupler** - Connector: **Female to Female (UHF)** - Impedance: **50 Ohm** - Construction: **All Metal, Bright Plated** - Insulator: **PTFE (Teflon)** --- ### ⚠️ **Why Use a Quality Coupler** Cheap couplers can: - Introduce signal loss - Corrode over time - Fail under load 👉 This coupler ensures a **secure, low-loss connection**. --- ### 🛠 **Installation Notes** - Simply screw in two PL259 connectors - No tools required - Ideal for temporary or permanent connections --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our shop for: - PL259 connectors - Coax cable (RG58 / RG8X / RG213) - Antennas & mounts - Adaptors & fittings --- ### 🔥 **Order Today** **Quick connection. Solid performance. No hassle.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl258-double-female-coax-joiner-coupler-for-pl259-connectors/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl258-double-female-coax-joiner-coupler-for-pl259-connectors/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl258-double-female-coax-joiner-coupler-for-pl259-connectors/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl258-double-female-coax-joiner-coupler-for-pl259-connectors/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PL258%20Double%20Female%20coax%20Joiner%20Coupler%20for%20PL259%20Connectors&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl258-double-female-coax-joiner-coupler-for-pl259-connectors%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl258-double-female-coax-joiner-coupler-for-pl259-connectors/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl258-double-female-coax-joiner-coupler-for-pl259-connectors/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl258-double-female-coax-joiner-coupler-for-pl259-connectors/?share=telegram) - **Product categories:** RF Adaptors --- ### [Aerial Wall Bracket 6 x 6 inch Welded Steel stand off Galvanized with V bolts](https://cbradio.co.uk/product/aerial-wall-bracket-6-x-6-inch-welded-steel-stand-off-galvanized-with-v-bolts/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧📡 **6″ x 6″ Aerial Wall Bracket – Galvanised Steel Stand-Off – V Bolt Mount – TV / CB / Ham** **Simple, Strong & Reliable Wall Mounting Solution** This **6″ x 6″ welded steel stand-off bracket** is a **light-duty mounting solution**, ideal for securing **small antennas and aerials** to walls or flat surfaces. Finished in **hot-dipped galvanised steel**, it offers **excellent corrosion resistance** for long-term outdoor use. --- ### ✅ **Key Features** ✔ **6″ x 6″ Stand-Off Design** – keeps mast clear of wall ✔ **Welded Steel Construction** – strong and durable ✔ **Hot-Dip Galvanised Finish** – rust resistant ✔ **Supplied with V Bolts** – ready to mount ✔ **Quick & Easy Installation** --- ### 📡 **Perfect For** - Small Colinear Antennas - Discone Antennas - TV Aerials - Lightweight CB & Ham Antennas --- ### ⚙️ **Specifications** - Type: **Wall Stand-Off Bracket** - Size: **6″ x 6″ (Approx.)** - Material: **Welded Steel** - Finish: **Hot Dip Galvanised** - Fixing: **V Bolts Included** --- ### 💪 **Built for Outdoor Use** - Corrosion-resistant galvanised coating - Strong enough for light-duty antenna setups - Ideal for **home or workshop installations** --- ### ⚠️ **Important Notes** ❗ Designed for **lightweight aerials only** ❗ Ensure correct wall fixings are used (not included) ❗ Suitable for small mast installations --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Antennas (colinear, discone, CB) - Mast clamps & brackets - Coax cable & connectors - SWR meters & accessories --- ### 🔥 **Order Today** **Strong, simple mounting – built to last outdoors.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/aerial-wall-bracket-6-x-6-inch-welded-steel-stand-off-galvanized-with-v-bolts/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/aerial-wall-bracket-6-x-6-inch-welded-steel-stand-off-galvanized-with-v-bolts/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/aerial-wall-bracket-6-x-6-inch-welded-steel-stand-off-galvanized-with-v-bolts/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/aerial-wall-bracket-6-x-6-inch-welded-steel-stand-off-galvanized-with-v-bolts/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Aerial%20Wall%20Bracket%206%20x%206%20inch%20Welded%20Steel%20stand%20off%20Galvanized%20with%20V%20bolts&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Faerial-wall-bracket-6-x-6-inch-welded-steel-stand-off-galvanized-with-v-bolts%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/aerial-wall-bracket-6-x-6-inch-welded-steel-stand-off-galvanized-with-v-bolts/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/aerial-wall-bracket-6-x-6-inch-welded-steel-stand-off-galvanized-with-v-bolts/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/aerial-wall-bracket-6-x-6-inch-welded-steel-stand-off-galvanized-with-v-bolts/?share=telegram) - **Product categories:** Installation aid --- ### [4 X pl259 UHF coax plugs 9mm for rg213 coax pack of 4](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **4x PL259 Plugs 9mm – UHF Connectors for RG213 Coax – Heavy Duty – Pack of 4** **Built for High Power & Professional Installations** This pack of **4 premium PL259 (UHF) plugs** is designed for **RG213 coaxial cable (9mm)**, delivering a **strong, low-loss connection** for demanding CB and amateur radio setups. 👉 Ideal for **base stations, high power systems, and heavy-duty installs**. --- ### ✅ **Key Features** ✔ **9mm Entry – Perfect for RG213 Coax** ✔ **Brown Heat-Resistant Insert** – won’t melt during soldering ✔ **Heavy Duty Construction** – designed for thicker cable ✔ **Solder Type Connection** – maximum signal transfer ✔ **Pack of 4** – ideal for small installs or spares --- ### ⚠️ **Avoid Cheap Connectors** Low-quality PL259 plugs often use **white inserts** that: - Melt when soldering - Distort under heat - Lead to unreliable connections 👉 These use **brown heat-resistant inserts** for **clean, hassle-free installation and long-term reliability**. --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Base Station Setups - High Power Systems - Antenna Builds & Repairs --- ### ⚙️ **Specifications** - Connector Type: **PL259 (UHF Male)** - Cable Compatibility: **RG213 (9mm)** - Connection Type: **Solder** - Insert Type: **Brown Heat Resistant** - Quantity: **4 Plugs** --- ### 🛠 **Installation Notes** - Suitable for standard soldering installation - Designed for RG213 and similar 9mm coax - Provides strong mechanical and electrical connection --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable (RG58 / RG8X / RG213) - Antennas & mounts - Adaptors & connectors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Heavy duty connectors for serious installations – do it right first time.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20X%20pl259%20UHF%20coax%20plugs%209mm%20for%20rg213%20coax%20pack%20of%204&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-x-pl259-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-x-pl259-uhf-coax-plugs-9mm-for-rg213-coax-pack-of-4/?share=telegram) - **Product categories:** PL259 Connectors --- ### [4 X PL259 UHF Plugs 6mm for RG58 coax pack of 4 PL-259](https://cbradio.co.uk/product/4-x-pl259-uhf-plugs-6mm-for-rg58-coax-pack-of-4-pl-259/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **4x PL259 Plugs 6mm – UHF Connectors for RG58 Coax – Solder Type – Pack of 4** **Reliable Connections – Built for CB & Ham Radio Installations** This pack of **4 high-quality PL259 (UHF) plugs** is designed specifically for **RG58 coaxial cable (6mm)**, ensuring a **secure, low-loss connection** for your radio setup. Perfect for **repairs, custom cables, or small installs**. --- ### ✅ **Key Features** ✔ **6mm Entry – Ideal for RG58 Coax** ✔ **Brown Heat-Resistant Insert** – won’t melt during soldering ✔ **Strong, Durable Construction** ✔ **Solder Type Connection** – ensures maximum signal transfer ✔ **Pack of 4** – perfect for small jobs --- ### ⚠️ **Avoid Cheap Alternatives** Many low-cost PL259 plugs use **white plastic inserts** that: - Melt when soldering - Deform under heat - Cause unreliable connections 👉 These feature **brown heat-resistant inserts** for **clean, easy installation and long-term reliability**. --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Mobile & Base Stations - Antenna Builds & Repairs --- ### ⚙️ **Specifications** - Connector Type: **PL259 (UHF Male)** - Cable Compatibility: **RG58 (6mm)** - Connection Type: **Solder** - Insert Type: **Brown Heat Resistant** - Quantity: **4 Plugs** --- ### 🛠 **Installation Notes** - Suitable for standard soldering methods - Works with RG58 coax (foam or solid dielectric) - Provides strong mechanical and electrical connection --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable (RG58 / RG8X / RG213) - Antennas & mounts - Adaptors & connectors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Quality connectors for a clean, reliable installation.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-x-pl259-uhf-plugs-6mm-for-rg58-coax-pack-of-4-pl-259/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-x-pl259-uhf-plugs-6mm-for-rg58-coax-pack-of-4-pl-259/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-x-pl259-uhf-plugs-6mm-for-rg58-coax-pack-of-4-pl-259/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-x-pl259-uhf-plugs-6mm-for-rg58-coax-pack-of-4-pl-259/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20X%20PL259%20UHF%20Plugs%206mm%20for%20RG58%20coax%20pack%20of%204%20PL-259&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-x-pl259-uhf-plugs-6mm-for-rg58-coax-pack-of-4-pl-259%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-x-pl259-uhf-plugs-6mm-for-rg58-coax-pack-of-4-pl-259/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-x-pl259-uhf-plugs-6mm-for-rg58-coax-pack-of-4-pl-259/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-x-pl259-uhf-plugs-6mm-for-rg58-coax-pack-of-4-pl-259/?share=telegram) - **Product categories:** PL259 Connectors --- ### [3 pin in-line plug air Plasma Cutter Cutting and TIG Welding Torch](https://cbradio.co.uk/product/3-pin-in-line-plug-air-plasma-cutter-cutting-and-tig-welding-torch/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌⚡ **3 Pin Inline Plug / Socket – TIG Welding Torch & Plasma Cutter Connector – Replacement** **Reliable Replacement Connector – Built for Workshop Use** This **3 pin inline plug/socket connector** is a **durable and practical replacement**, ideal for **TIG welding torches and plasma cutters**. Designed for **secure connections and easy installation**, making it perfect for repairs or custom setups. --- ### ✅ **Key Features** ✔ **3 Pin Inline Connector (Plug / Socket Type)** ✔ **Ideal for TIG & Plasma Cutter Torches** ✔ **Strong, Durable Construction** ✔ **Secure Electrical Connection** ✔ **Easy to Install / Replace** --- ### ⚡ **Perfect For** - TIG Welding Torches - Plasma Cutters - Workshop Repairs - Replacement Connectors - Custom Cable Builds --- ### ⚙️ **Specifications** - Type: **3 Pin Inline Connector** - Application: **TIG / Plasma Cutting Equipment** - Connection: **Inline (Cable to Cable)** - Build: **Heavy Duty / Workshop Grade** --- ### 🛠 **Installation Notes** - Suitable for replacing worn or damaged connectors - Ensure correct wiring alignment before use - Professional installation recommended if unsure --- ### ⚠️ **Why Choose a Quality Connector** Poor connectors can: - Cause unreliable connections - Lead to equipment faults - Fail under load 👉 This connector ensures a **solid, dependable connection for your equipment**. --- ### 🇬🇧 **UK Seller – Fast Delivery** ✔ No long overseas wait ✔ Fast UK dispatch ✔ Secure packaging 👉 **Have your item in days – not weeks** --- ### 💬 **More Available** 👉 Check our shop for: - Welding accessories - Connectors & adaptors - CB & radio equipment - Workshop essentials --- ### 🔥 **Order Today** **Fix it properly – keep your equipment running.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-pin-in-line-plug-air-plasma-cutter-cutting-and-tig-welding-torch/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-pin-in-line-plug-air-plasma-cutter-cutting-and-tig-welding-torch/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-pin-in-line-plug-air-plasma-cutter-cutting-and-tig-welding-torch/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-pin-in-line-plug-air-plasma-cutter-cutting-and-tig-welding-torch/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%20pin%20in-line%20plug%20air%20Plasma%20Cutter%20Cutting%20and%20TIG%20Welding%20Torch&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-pin-in-line-plug-air-plasma-cutter-cutting-and-tig-welding-torch%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-pin-in-line-plug-air-plasma-cutter-cutting-and-tig-welding-torch/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-pin-in-line-plug-air-plasma-cutter-cutting-and-tig-welding-torch/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-pin-in-line-plug-air-plasma-cutter-cutting-and-tig-welding-torch/?share=telegram) - **Product categories:** RF Adaptors --- ### [DIN face plate Metal in dash Mount for TTi TCB-900 / 950 CB RADIO](https://cbradio.co.uk/product/din-face-plate-metal-in-dash-mount-for-tti-tcb-900-950-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚗 **Metal DIN Dash Mount Face Plate – TTi TCB-900 / 950 – CB Radio In-Dash Installation Kit** **Professional In-Dash Fit – Clean, Secure Installation** This **metal DIN faceplate mount** allows you to install your **CB radio neatly into a standard car stereo slot**, giving a **factory-style finish** to your setup. 👉 Perfect for a **clean, professional installation** in cars, vans, and trucks. --- ### ✅ **Why Choose This DIN Mount** ✔ **All Metal Construction** – strong, durable & long-lasting ✔ **Professional Finish** – neat in-dash installation ✔ **Standard DIN Size Fitment** ✔ **Secure Mounting Solution** ✔ **Better than Cheap Plastic Alternatives** --- ### 📡 **Compatible With** - TTi TCB-900 - TTi TCB-950 - President Johnson II - Alinco DR-135 DX 👉 May fit other models with similar dimensions --- ### ⚙️ **Specifications** - Type: **DIN In-Dash Mount / Faceplate** - Material: **All Metal Construction** - Slot Dimensions: **172 x 53 mm (Standard DIN Size)** - Fitment: **Dashboard Radio Slot** --- ### ⚠️ **Important Notes** ❗ **CB radio NOT included** – mount only ❗ On most radios *(except TTi TCB-900)*: 👉 The built-in speaker will be covered 👉 **External speaker recommended** --- ### 🚗 **Perfect For** - Car installations - Vans & commercial vehicles - Trucks / HGV setups - Clean, factory-style CB installs --- ### 💪 **Why Use a Proper DIN Mount** Without one: - Installs look untidy - Radios can move or vibrate - Fitment can be insecure 👉 This mount gives a **solid, professional result**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - External CB speakers - CB radios & accessories - Mounting kits & brackets - Coax cable & connectors --- ### 🔥 **Order Today** **Clean install. Solid fit. Professional finish.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/din-face-plate-metal-in-dash-mount-for-tti-tcb-900-950-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/din-face-plate-metal-in-dash-mount-for-tti-tcb-900-950-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/din-face-plate-metal-in-dash-mount-for-tti-tcb-900-950-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/din-face-plate-metal-in-dash-mount-for-tti-tcb-900-950-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DIN%20face%20plate%20Metal%20in%20dash%20Mount%20for%20TTi%20TCB-900%20%2F%20950%20CB%20RADIO&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdin-face-plate-metal-in-dash-mount-for-tti-tcb-900-950-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/din-face-plate-metal-in-dash-mount-for-tti-tcb-900-950-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/din-face-plate-metal-in-dash-mount-for-tti-tcb-900-950-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/din-face-plate-metal-in-dash-mount-for-tti-tcb-900-950-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [RG58 10m mil spec Coax cable for CB Radio Scanner or Ham Radio](https://cbradio.co.uk/product/rg58-10m-mil-spec-coax-cable-for-cb-radio-scanner-or-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **10 Metres RG58 Coax Cable – High Quality Tinned Copper – 50 Ohm – CB & Ham Radio (No PL259)** **Premium Coaxial Cable – Flexible, Durable & Low Loss** This **10 metre RG58 coaxial cable** is a **high-quality, professional-grade cable**, ideal for **CB and amateur radio installations**. 👉 Supplied **without PL259 connectors**, giving you full flexibility for custom installations. --- ### ✅ **Why This Cable Stands Out** ✔ **Tinned Copper Core & Braid** – superior durability ✔ **95% Shielding Coverage** – reduces interference ✔ **Flexible & Easy to Install** ✔ **50 Ohm Impedance** – perfect for CB & Ham radio ✔ **Same High Quality as Our Pre-Made Leads** --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Base Stations - Mobile Setups - Custom Cable Builds --- ### ⚙️ **Specifications** - Length: **10 Metres** - Type: **RG58 Coaxial Cable** - Impedance: **50 Ohm** - Inner Conductor: **19 x 0.18mm Tinned Copper** - Dielectric: **2.95mm Solid PE** - Shielding: **95% Tinned Copper Braiding** - Outer Sheath: **4.95mm PVC** --- ### 🔬 **Why Tinned Copper?** Tinned copper offers major advantages over standard copper: ✔ **Up to 10x Longer Lifespan** ✔ **Excellent Corrosion Resistance** ✔ **Ideal for Outdoor & Marine Use** ✔ **Maintains Strong Signal Performance** 👉 Perfect for **aerial and radio applications** where reliability matters. --- ### ⚠️ **Important Note** ❗ **PL259 connectors NOT included** 👉 See our other listings if you require cable with plugs fitted --- ### 💡 **Applications** - Vehicle installs - Marine & boating use - Outdoor antenna systems - Workshop & DIY builds --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to cut & terminate --- ### 💬 **More Available** 👉 Check our shop for: - PL259 connectors - Pre-made coax leads - Antennas & mounts - CB & Ham radio accessories --- ### 🔥 **Order Today** **High quality cable for a reliable, long-lasting installation.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg58-10m-mil-spec-coax-cable-for-cb-radio-scanner-or-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg58-10m-mil-spec-coax-cable-for-cb-radio-scanner-or-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg58-10m-mil-spec-coax-cable-for-cb-radio-scanner-or-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg58-10m-mil-spec-coax-cable-for-cb-radio-scanner-or-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG58%2010m%20mil%20spec%20Coax%20cable%20for%20CB%20Radio%20Scanner%20or%20Ham%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg58-10m-mil-spec-coax-cable-for-cb-radio-scanner-or-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg58-10m-mil-spec-coax-cable-for-cb-radio-scanner-or-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg58-10m-mil-spec-coax-cable-for-cb-radio-scanner-or-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg58-10m-mil-spec-coax-cable-for-cb-radio-scanner-or-ham-radio/?share=telegram) - **Product categories:** RG58 --- ### [Springer CB Radio Antenna 1.55m](https://cbradio.co.uk/product/springer-cb-radio-ariel-antenna-1-55m-aerial-black-xl/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚫🚛 **Black XL Springer CB Aerial 1.55m – Heavy Duty Trucker Antenna – 27MHz 1000W – 3/8 Mount** **The Classic Trucker Antenna – Tough, Reliable & Built to Last** The **Black XL Springer CB Aerial** is one of the **most popular pre-tuned CB antennas**, trusted by **truckers, off-roaders, and farmers** for its **strength, flexibility, and consistent performance**. 👉 Built for real-world use — **virtually indestructible**. --- ### ✅ **Why This Antenna is So Popular** ✔ **Heavy Duty Open Coil Design** – absorbs impact & vibration ✔ **Flexible Stainless Steel Whip** – ideal for tough environments ✔ **Pre-Tuned for CB (27–28 MHz)** – ready to install ✔ **Handles up to 1000 Watts** ✔ **Proven, Reliable Performance** ✔ **Classic Trucker Style** --- ### 🚜 **Perfect For** - Trucks / HGVs - 4×4 & Off-Road Vehicles - Agricultural Machinery - Pickup Trucks - Daily CB Use --- ### 📡 **Performance You Can Rely On** - Covers full **27–28 MHz CB band (80 channels)** - **Low SWR (~1.5:1)** for efficient transmission - Designed for **stable communication in harsh conditions** --- ### ⚙️ **Specifications** - Antenna Type: **1/4 Wave Base Loaded Mobile Antenna** - Frequency: **27–28 MHz** - Length: **1.55 Metres (XL Size)** - Power Handling: **Up to 1000 Watts** - Coil Length: **150mm** - Coil Diameter: **50mm** - Impedance: **50 Ohms** - SWR: **Approx. 1.5:1** - Fitting: **3/8” UNF Thread** - Whip Material: **17/7 PH Stainless Steel** --- ### ⚠️ **Don’t Settle for Cheap Copies** Lower quality antennas: - Snap or bend easily - Perform poorly - Don’t last 👉 This is a **proven heavy-duty design used by professionals**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Mag mounts & mirror mounts - Coax cable & connectors - SWR meters & tuning tools - CB radios & accessories --- ### 🔥 **Order Today** **Built tough. Trusted by drivers. Ready for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/springer-cb-radio-ariel-antenna-1-55m-aerial-black-xl/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/springer-cb-radio-ariel-antenna-1-55m-aerial-black-xl/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/springer-cb-radio-ariel-antenna-1-55m-aerial-black-xl/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/springer-cb-radio-ariel-antenna-1-55m-aerial-black-xl/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Springer%20CB%20Radio%20Antenna%201.55m&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fspringer-cb-radio-ariel-antenna-1-55m-aerial-black-xl%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/springer-cb-radio-ariel-antenna-1-55m-aerial-black-xl/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/springer-cb-radio-ariel-antenna-1-55m-aerial-black-xl/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/springer-cb-radio-ariel-antenna-1-55m-aerial-black-xl/?share=telegram) - **Product categories:** Long Stingers --- ### [Red Devil Modulator Type Mobile CB Aerial Antenna and Right angle Mirror Mount](https://cbradio.co.uk/product/red-devil-modulator-type-mobile-cb-aerial-antenna-and-right-angle-mirror-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔴🚛 **Red Devil CB Aerial + Right Angle Mirror Mount – 1.89m Modulator Antenna – 26–28MHz** **Extreme Performance – Built for Serious Operators** The **Red Devil CB Aerial (Scarlett Warrior)** is a **high-performance modulator-type antenna**, designed for **maximum range and wideband coverage**. Paired with a **heavy-duty right angle mirror mount**, this kit is perfect for **trucks, 4x4s, and commercial vehicles** needing a **strong, reliable installation**. --- ### ✅ **Why This Kit Stands Out** ✔ **Modulator Type Antenna** – wider bandwidth & strong performance ✔ **Large High-Efficiency Coil** – superior signal capability ✔ **Heavy Duty Right Angle Mirror Mount Included** ✔ **Suitable for CB & 10m Amateur Band Use** ✔ **Flexible Stainless Steel Whip** ✔ **Built for Tough Environments** --- ### 📡 **Red Devil – Serious Performance** Also known as the **Scarlett Warrior**, this antenna offers: - **Wider frequency coverage (26–28 MHz)** - Strong transmit & receive performance - Larger coil than standard bull whip designs - Ideal for **long-distance communication** 👉 A step up from standard mobile antennas. --- ### 🚛 **Right Angle Mirror Mount** - Designed for **truck mirror arms / vertical mounting points** - Provides **secure, stable installation** - Ideal for **HGVs, vans, and 4×4 vehicles** - Built for heavy-duty use --- ### 🚜 **Perfect For** - Trucks / HGVs - 4×4 & Off-Road Vehicles - Vans & Commercial Vehicles - CB & Amateur Radio Users --- ### ⚙️ **Antenna Specifications** - Type: **Base Loaded Mobile Antenna (Modulator Type)** - Frequency Range: **26–28 MHz** - Length: **1.89 Metres** - Coil Length: **460mm** - Coil Diameter: **22mm** - Impedance: **50 Ohms** - SWR: **Approx. 1.5:1** - Power Handling: **Up to 500 Watts** - Material: **Stainless Steel** --- ### ⚠️ **Why Choose This Setup** Cheap antennas: - Have narrow bandwidth - Perform poorly at range - Don’t last 👉 This setup delivers **strong signal, durability, and wide coverage**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable & connectors - SWR meters & tuning tools - CB radios & accessories - Mount upgrades --- ### 🔥 **Order Today** **Big antenna. Big performance. Built for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/red-devil-modulator-type-mobile-cb-aerial-antenna-and-right-angle-mirror-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/red-devil-modulator-type-mobile-cb-aerial-antenna-and-right-angle-mirror-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/red-devil-modulator-type-mobile-cb-aerial-antenna-and-right-angle-mirror-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/red-devil-modulator-type-mobile-cb-aerial-antenna-and-right-angle-mirror-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Red%20Devil%20Modulator%20Type%20Mobile%20CB%20Aerial%20Antenna%20and%20Right%20angle%20Mirror%20Mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fred-devil-modulator-type-mobile-cb-aerial-antenna-and-right-angle-mirror-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/red-devil-modulator-type-mobile-cb-aerial-antenna-and-right-angle-mirror-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/red-devil-modulator-type-mobile-cb-aerial-antenna-and-right-angle-mirror-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/red-devil-modulator-type-mobile-cb-aerial-antenna-and-right-angle-mirror-mount/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [Transmission Relay 89531-60040. 2000 Toyota Landcruiser Amazon 4.7 V8 4.2TD](https://cbradio.co.uk/product/transmission-relay-89531-60040-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Toyota Land Cruiser Amazon Transmission Relay 89531-60040 – 100 Series 4.7 V8 / 4.2 TD** **Genuine Toyota OEM Relay – Tested & Working** Original **Transmission Relay (Part No. 89531-60040)** removed from a **2000 Toyota Land Cruiser Amazon (100 Series)**. Carefully removed from a vehicle being dismantled and supplied in **good working condition**. --- ### ✅ **Key Features** ✔ **Genuine Toyota OEM Part** ✔ **Transmission Control Relay** ✔ **Part Number: 89531-60040** ✔ **Tested & Working Before Removal** ✔ **Direct Replacement Unit** --- ### 🚙 **Vehicle Compatibility** - **Toyota Land Cruiser Amazon (100 Series)** - **4.7 V8 Petrol** - **4.2 TD Diesel** 👉 May fit other Toyota models – always match **part number (89531-60040)** before purchase. --- ### ⚙️ **Function** Controls key aspects of the **automatic transmission system**, including: - Gear shift control signals - Transmission operation support - Electrical switching within the gearbox system 👉 Essential for **smooth gear changes and proper transmission function**. --- ### 📦 **Condition** - Used item - Fully working when removed - May show minor cosmetic wear due to age/use 👉 Please check photos carefully for condition and compatibility. --- ### ⚠️ **Important Notes** ❗ Ensure part number matches your vehicle ❗ Professional installation recommended ❗ This is a **used OEM part**, not aftermarket --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Land Cruiser Parts Available** 👉 Check our shop for: - ECUs & relays - Interior switches & modules - Suspension & 4×4 upgrades - CB & vehicle electronics --- ### 🔥 **Order Today** **Genuine Toyota part – reliable performance you can trust.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/transmission-relay-89531-60040-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/transmission-relay-89531-60040-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/transmission-relay-89531-60040-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/transmission-relay-89531-60040-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Transmission%20Relay%2089531-60040.%202000%20Toyota%20Landcruiser%20Amazon%204.7%20V8%204.2TD&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftransmission-relay-89531-60040-2000-toyota-landcruiser-amazon-4-7-v8-4-2td%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/transmission-relay-89531-60040-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/transmission-relay-89531-60040-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/transmission-relay-89531-60040-2000-toyota-landcruiser-amazon-4-7-v8-4-2td/?share=telegram) - **Product categories:** Land Cruiser --- ### [Ash tray & Power Outlet. 2000 Toyota Landcruiser Amazon 100 series 4.7 V8 4.2TD](https://cbradio.co.uk/product/ash-tray-power-outlet-2000-toyota-landcruiser-amazon-100-series-4-7-v8-4-2td/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Toyota Land Cruiser Amazon 100 Series Ashtray & Power Outlet Console + Aerial Relay 85914-60070** **Genuine OEM Parts – Tested & Ready to Fit** This listing includes **original Toyota components** removed from a **2000 Toyota Land Cruiser Amazon 4.7 V8 (100 Series)**. 👉 Ideal for **repairs, replacements, or interior restoration**. --- ### ✅ **What’s Included** ✔ **Antenna / Aerial Relay Control Box** - Part Number: **85914-60070** - Controls electric aerial operation ✔ **Ashtray & Power Outlet Console Unit** - Includes **12V power outlet** - Complete console section --- ### 🚙 **Vehicle Compatibility** - **Toyota Land Cruiser Amazon (100 Series)** - Suitable for **4.7 V8 petrol models** 👉 Console is for **grey interior models** 👉 **Beige version also available** (see our other listings) --- ### ⚙️ **Functions** 🔌 **Aerial Relay Control Box** - Controls electric antenna raise/lower - Ensures proper aerial operation 🔋 **Console Unit** - Integrated **12V power outlet** - OEM fit and finish - Direct replacement for worn/damaged units --- ### 📦 **Condition** - Used items - Removed from running vehicle - Fully working when removed - May show minor wear consistent with age 👉 Please study photos carefully for condition. --- ### ⚠️ **Important Notes** ❗ Ensure part numbers and fitment match your vehicle ❗ Professional installation recommended ❗ Genuine OEM parts – not aftermarket --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Land Cruiser Parts Available** 👉 Check our shop for: - ECUs & electrical modules - Interior trim & switches - Suspension & 4×4 parts - CB & vehicle electronics --- ### 🔥 **Order Today** **Genuine parts. Perfect fit. Restore your Land Cruiser properly.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ash-tray-power-outlet-2000-toyota-landcruiser-amazon-100-series-4-7-v8-4-2td/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ash-tray-power-outlet-2000-toyota-landcruiser-amazon-100-series-4-7-v8-4-2td/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ash-tray-power-outlet-2000-toyota-landcruiser-amazon-100-series-4-7-v8-4-2td/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ash-tray-power-outlet-2000-toyota-landcruiser-amazon-100-series-4-7-v8-4-2td/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Ash%20tray%20%26%20Power%20Outlet.%202000%20Toyota%20Landcruiser%20Amazon%20100%20series%204.7%20V8%204.2TD&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fash-tray-power-outlet-2000-toyota-landcruiser-amazon-100-series-4-7-v8-4-2td%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ash-tray-power-outlet-2000-toyota-landcruiser-amazon-100-series-4-7-v8-4-2td/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ash-tray-power-outlet-2000-toyota-landcruiser-amazon-100-series-4-7-v8-4-2td/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ash-tray-power-outlet-2000-toyota-landcruiser-amazon-100-series-4-7-v8-4-2td/?share=telegram) - **Product categories:** Land Cruiser --- ### [Toyota LandCruiser Amazon Antenna / Aerial Relay Control Box - 85914-60070](https://cbradio.co.uk/product/toyota-landcruiser-amazon-antenna-aerial-relay-control-box-85914-60070/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙📡 **Toyota Land Cruiser Amazon Antenna Relay Control Box – 85914-60070 – OEM Aerial Module** **Genuine Toyota Part – Tested & Working** Original **Antenna / Aerial Relay Control Box (Part No. 85914-60070)** removed from a **Toyota Land Cruiser Amazon (100 Series)**. Carefully removed from a vehicle currently being dismantled and supplied in **good working order**. --- ### ✅ **Key Features** ✔ **Genuine Toyota OEM Part** ✔ **Antenna / Aerial Relay Control Module** ✔ **Part Number: 85914-60070** ✔ **Tested & Fully Working Before Removal** ✔ **Direct Replacement Unit** --- ### 🚙 **Vehicle Compatibility** - **Toyota Land Cruiser Amazon (100 Series)** 👉 May fit other Toyota models – please match **part number (85914-60070)** before purchase. --- ### ⚙️ **Function** Controls the **electric aerial system**, including: - Power to the antenna motor - Raise/lower function - Signal switching 👉 Essential for proper **automatic aerial operation**. --- ### 📦 **Condition** - Used item - Working when removed - May show minor cosmetic wear due to age 👉 Please check photos carefully for condition and compatibility. --- ### ⚠️ **Important Notes** ❗ Ensure part number matches before purchase ❗ Professional installation recommended ❗ This is a **used OEM part**, not aftermarket --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Land Cruiser Parts Available** 👉 Check our shop for: - Electrical modules & ECUs - Switches & interior parts - Suspension & 4×4 upgrades - CB & vehicle electronics --- ### 🔥 **Order Today** **Restore your aerial function with a genuine Toyota part.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-amazon-antenna-aerial-relay-control-box-85914-60070/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-amazon-antenna-aerial-relay-control-box-85914-60070/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-amazon-antenna-aerial-relay-control-box-85914-60070/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-amazon-antenna-aerial-relay-control-box-85914-60070/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20LandCruiser%20Amazon%20Antenna%20%2F%20Aerial%20Relay%20Control%20Box%20-%2085914-60070&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-amazon-antenna-aerial-relay-control-box-85914-60070%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-amazon-antenna-aerial-relay-control-box-85914-60070/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-amazon-antenna-aerial-relay-control-box-85914-60070/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-amazon-antenna-aerial-relay-control-box-85914-60070/?share=telegram) - **Product categories:** Land Cruiser --- ### [Toyota Landcruiser Amazon 4.7 V8 fuel pump control ECU 89570-60130](https://cbradio.co.uk/product/toyota-landcruiser-amazon-4-7-v8-fuel-pump-control-ecu-89570-60130/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Toyota Land Cruiser Amazon 4.7 V8 Fuel Pump Control ECU – 89570-60130 – OEM** **Genuine Toyota Part – Tested & Working** Original **Fuel Pump Control ECU (Part No. 89570-60130)** removed from a **Toyota Land Cruiser Amazon 4.7 V8 (100 Series)**. Carefully removed from a vehicle currently being dismantled and supplied in **good working condition**. --- ### ✅ **Key Features** ✔ **Genuine Toyota OEM Part** ✔ **Fuel Pump Control ECU** ✔ **Part Number: 89570-60130** ✔ **Tested & Working Before Removal** ✔ **Direct Replacement Unit** --- ### 🚙 **Vehicle Compatibility** - **Toyota Land Cruiser Amazon (100 Series)** - **4.7 V8 Petrol Models** 👉 May fit other models – please match **part number (89570-60130)** before purchase. --- ### ⚙️ **Function** Controls the **fuel pump operation**, ensuring: - Correct fuel delivery - Stable engine performance - Reliable starting --- ### 📦 **Condition** - Used item - Fully working when removed - May show minor cosmetic marks due to age/use 👉 Please check photos carefully for condition and compatibility. --- ### ⚠️ **Important Notes** ❗ Ensure part number matches before purchase ❗ Professional installation recommended ❗ This is a **used OEM part**, not aftermarket --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Land Cruiser Parts Available** 👉 Check our shop for: - ECUs & electrical components - Switches & interior parts - Suspension & 4×4 upgrades - CB & vehicle electronics --- ### 🔥 **Order Today** **Genuine replacement. Reliable performance. Get your Land Cruiser running right.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-amazon-4-7-v8-fuel-pump-control-ecu-89570-60130/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-amazon-4-7-v8-fuel-pump-control-ecu-89570-60130/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-amazon-4-7-v8-fuel-pump-control-ecu-89570-60130/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-amazon-4-7-v8-fuel-pump-control-ecu-89570-60130/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20Landcruiser%20Amazon%204.7%20V8%20fuel%20pump%20control%20ECU%2089570-60130&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-amazon-4-7-v8-fuel-pump-control-ecu-89570-60130%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-amazon-4-7-v8-fuel-pump-control-ecu-89570-60130/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-amazon-4-7-v8-fuel-pump-control-ecu-89570-60130/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-amazon-4-7-v8-fuel-pump-control-ecu-89570-60130/?share=telegram) - **Product categories:** Land Cruiser --- ### [MC-ECH 4m cable kit SO239 to PL259 for mobile antenna aerial mount](https://cbradio.co.uk/product/mc-ech-4m-cable-kit-so239-to-pl259-for-mobile-antenna-aerial-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🔌 **MC-ECH 4m Coax Cable Kit SO239 to PL259 – Mobile Antenna Lead – CB & Ham Radio** **Ready-Made Antenna Cable – Quick & Easy Installation** The **MC-ECH 4 metre coax cable kit** is a **pre-assembled antenna lead**, ideal for use with **boot mounts, hatchback mounts, and other mobile antenna setups**. Perfect for **CB and amateur radio installations**, providing a **reliable 50 Ohm connection straight out of the box**. --- ### ✅ **Key Features** ✔ **4 Metre Ready-Made Cable** – no soldering required ✔ **SO239 Chassis Mount Socket** – for antenna mount connection ✔ **PL259 Plug (Radio End)** – standard UHF connector ✔ **50 Ohm Coax** – ideal for CB & Ham radio ✔ **Clean, Professional Installation** --- ### 🚗 **Designed For** - **MB-400 Boot Mount** - **MB-800 Hatchback Mount** - Other SO239-based antenna mounts 👉 A perfect match for your mobile antenna setup. --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Mobile Antenna Systems - Replacement or Upgrade Leads --- ### ⚙️ **Specifications** - Model: **MC-ECH Cable Kit** - Length: **4 Metres** - Impedance: **50 Ohm** - Connector (Antenna End): **SO239 Chassis Socket** - Connector (Radio End): **PL259 Plug** - Cable Type: **Coaxial (Mobile Use)** --- ### ⚠️ **Why Use a Quality Cable** Cheap cables can cause: - Signal loss - Interference - Poor performance 👉 This cable ensures a **strong, stable signal and reliable connection**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Boot mounts (MB-400 / MB-800) - CB & Ham antennas - SWR meters & tuning tools - Connectors & adaptors --- ### 🔥 **Order Today** **Plug in. Mount up. Get on the air.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mc-ech-4m-cable-kit-so239-to-pl259-for-mobile-antenna-aerial-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mc-ech-4m-cable-kit-so239-to-pl259-for-mobile-antenna-aerial-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mc-ech-4m-cable-kit-so239-to-pl259-for-mobile-antenna-aerial-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mc-ech-4m-cable-kit-so239-to-pl259-for-mobile-antenna-aerial-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MC-ECH%204m%20cable%20kit%20SO239%20to%20PL259%20for%20mobile%20antenna%20aerial%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmc-ech-4m-cable-kit-so239-to-pl259-for-mobile-antenna-aerial-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mc-ech-4m-cable-kit-so239-to-pl259-for-mobile-antenna-aerial-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mc-ech-4m-cable-kit-so239-to-pl259-for-mobile-antenna-aerial-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mc-ech-4m-cable-kit-so239-to-pl259-for-mobile-antenna-aerial-mount/?share=telegram) - **Product categories:** Coax Cable --- ### [sirio type 3/8 dv power-stick mount 3/8 fitting for ham antenna cb aerial](https://cbradio.co.uk/product/sirio-type-3-8-dv-power-stick-mount-3-8-fitting-for-ham-antenna-cb-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **Sirio Type 3/8 DV Power Stick Mount – Dome Aerial Mount – CB & Ham Antenna Base** **Strong, Simple & Versatile Mounting Solution** This **Sirio-style 3/8 DV dome mount** is a **robust and reliable aerial base**, designed for **CB and amateur radio antennas** that use the standard **3/8 thread fitting**. Styled on the classic **DV-27 mount**, this version features a **straight 3/8 connector**, making it ideal for a wide range of modern antennas. --- ### ✅ **Key Features** ✔ **Standard 3/8 Thread Fitting** – fits most CB antennas ✔ **Sirio-Style DV Dome Mount Design** ✔ **Straight Connector Version** – simple and strong ✔ **Compact & Low Profile Installation** ✔ **Durable Construction for Mobile Use** --- ### 📡 **Perfect For** - CB Radio Aerials - Amateur (Ham) Antennas - Firestik / Power Stick Antennas - Springer Aerials - Custom Installations --- ### 🚗 **Flexible Installation Options** - Fits through a **13mm hole** - Ideal for **light bars, roof mounting, or custom panels** - Suitable for **permanent installations** 👉 Perfect for clean, professional installs. --- ### ⚙️ **Specifications** - Mount Type: **DV Style Dome Mount (Straight)** - Thread: **3/8 Standard CB Thread** - Installation Hole Size: **13mm** - Compatibility: **CB & Ham Antennas with 3/8 fitting** --- ### ⚠️ **Important Notes** ❗ **Cable NOT included** 👉 Requires compatible coax cable assembly ❗ Ensure correct installation to prevent water ingress when roof mounting --- ### 💪 **Why Choose This Mount** - Stronger and cleaner than temporary mounts - Ideal for permanent installs - Compatible with a wide range of antennas 👉 A **simple, professional solution for solid antenna mounting**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - Coax cable assemblies - Antennas (Springers, Whips, Power Sticks) - Connectors & adaptors - SWR meters & tuning tools --- ### 🔥 **Order Today** **Solid mount. Clean install. Built to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-type-3-8-dv-power-stick-mount-3-8-fitting-for-ham-antenna-cb-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-type-3-8-dv-power-stick-mount-3-8-fitting-for-ham-antenna-cb-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-type-3-8-dv-power-stick-mount-3-8-fitting-for-ham-antenna-cb-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-type-3-8-dv-power-stick-mount-3-8-fitting-for-ham-antenna-cb-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20sirio%20type%203%2F8%20dv%20power-stick%20mount%203%2F8%20fitting%20for%20ham%20antenna%20cb%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-type-3-8-dv-power-stick-mount-3-8-fitting-for-ham-antenna-cb-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-type-3-8-dv-power-stick-mount-3-8-fitting-for-ham-antenna-cb-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-type-3-8-dv-power-stick-mount-3-8-fitting-for-ham-antenna-cb-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-type-3-8-dv-power-stick-mount-3-8-fitting-for-ham-antenna-cb-aerial/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [mini springer & flatbar mirror mount cb aerial kit](https://cbradio.co.uk/product/black-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚫🚛 **Mini Springer CB Aerial + Flat Bar Mirror Mount Kit – 27MHz Trucker Antenna – 4×4 HGV** **Heavy Duty Mirror Mount Kit – Built for the Road** This **Mini Springer CB aerial kit with flat bar mirror mount** is a **complete, ready-to-fit solution** designed for **trucks, vans, and 4×4 vehicles**. Engineered for **mirror arm and flat bar installations**, it delivers a **secure fit, strong signal, and long-lasting durability**. --- ### 🎨 **Colour Options** 👉 Leave your preferred colour at checkout (Black supplied as standard if no preference is given) --- ### ✅ **Why This Kit Sells So Well** ✔ **Complete Installation Kit – Ready to Fit** ✔ **Heavy Duty Mini Springer Antenna** ✔ **Flat Bar Mirror Mount – Ideal for HGVs & Trucks** ✔ **Pre-Tuned for 27–28 MHz CB Band** ✔ **Flexible & Impact-Resistant Design** ✔ **Quality British Made 🇬🇧** --- ### 📡 **Mini Springer – Compact but Tough** - Base loaded spring design absorbs knocks & vibration - Flexible **powder-coated stainless steel whip** - Built for **real working conditions** - **Virtually indestructible construction** --- ### 🚛 **Flat Bar Mirror Mount** - **Polished aluminium build** - Designed for **mirror arms / flat mounting points** - Strong, stable and ideal for mobile setups - Easy to install and adjust --- ### 🚜 **Ideal For** - Trucks / HGVs - Vans & commercial vehicles - 4×4 & off-road vehicles - Agricultural machinery --- ### ⚙️ **Mini Springer Specifications** - Type: **Base Loaded CB Aerial** - Frequency: **27–28 MHz** - Length: **89cm** - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000W** - Fitting: **3/8” Male Thread** - Build: **Powder Coated Stainless Whip + Steel Coil** - Made in the UK 🇬🇧 --- ### ⚙️ **Flat Bar Mount Specifications** - Type: **Mirror / Flat Bar Mount** - Material: **Polished Aluminium** - Fitting: **3/8 Thread (Snail Type)** - Cable: **Approx. 4m RG58** - Connector: **PL259 (Radio End)** - Made in the UK 🇬🇧 --- ### ⚠️ **Why Choose This Kit** Cheap kits often: - Flex excessively or fail - Have weak mounts - Deliver poor signal performance 👉 This is a **proven, heavy-duty setup built for daily use**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 See our shop for: - SWR meters & tuning tools - CB radios - Coax cables & connectors - Mount upgrades & accessories --- ### 🔥 **Order Today** **Strong mount. Reliable signal. Built to last.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/black-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/black-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/black-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/black-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mini%20springer%20%26%20flatbar%20mirror%20mount%20cb%20aerial%20kit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fblack-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/black-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/black-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/black-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [mini springer cb radio aerial with mag mount](https://cbradio.co.uk/product/black-mini-springer-4x4-cb-radio-aerial-with-mag-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## ⚫🚛 **Black Mini Springer CB Aerial + 5” Turbo Mag Mount – 27MHz Trucker Antenna Kit – 1000W** **Complete CB Antenna Kit – Compact, Tough & Ready to Go** This **Black Mini Springer CB Aerial kit** includes a **heavy duty 5” turbo magnetic mount**, giving you a **complete, reliable setup straight out of the box**. 👉 Built for **truckers, 4×4 users, and off-road environments**, this is one of the **most popular and durable CB antenna combinations available**. --- ### 💪 **Serious Holding Power** 🧲 **5” Turbo Magnetic Mount** 👉 If this doesn’t hold your aerial on the roof… **no single mag mount will!** - Strong grip for motorway speeds - Stable even in rough conditions - Protective rubber base to prevent paint damage --- ### 📡 **Mini Springer – Tough & Reliable** ✔ **Pre-Tuned CB Antenna (27–28 MHz)** ✔ **Heavy Duty Open Coil Design** – absorbs knocks & vibration ✔ **Flexible Stainless Steel Whip** – ideal for real-world use ✔ **Virtually Indestructible Build** ✔ **Compact Size (89cm)** – perfect for mobile setups --- ### 🚜 **Perfect For** - Truckers / HGV Drivers - 4×4 & Off-Road Vehicles - Farmers & Agricultural Use - Pickup Trucks - Everyday Mobile CB Use --- ### ⚙️ **Mini Springer Specifications** - Type: **Base Loaded Spring CB Aerial** - Frequency: **27–28 MHz** - Length: **89cm** - VSWR: **1.5:1 or better** - Power Handling: **Up to 1000 Watts** - Fitting: **Standard 3/8 Thread** - Build: **Heavy Duty Open Coil + Stainless Whip** - Made in the UK 🇬🇧 --- ### ⚙️ **Turbo Mag Mount Specifications** - Mount Type: **5” Magnetic Base** - Fitting: **3/8 Thread** - Cable: **Approx. 4 Metres RG58** - Connector: **PL259 (radio end)** - Base: **Protective Rubber Pad** - Made in the UK 🇬🇧 --- ### ⚠️ **Why Choose This Kit** Cheap setups: - Don’t hold properly - Perform poorly - Fail quickly 👉 This kit is **proven, durable, and built for real use**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - SWR meters & tuning tools - CB radios - Coax cable & connectors - Mount upgrades & accessories --- ### 🔥 **Order Today** **Compact. Tough. Ready for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/black-mini-springer-4x4-cb-radio-aerial-with-mag-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/black-mini-springer-4x4-cb-radio-aerial-with-mag-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/black-mini-springer-4x4-cb-radio-aerial-with-mag-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/black-mini-springer-4x4-cb-radio-aerial-with-mag-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mini%20springer%20cb%20radio%20aerial%20with%20mag%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fblack-mini-springer-4x4-cb-radio-aerial-with-mag-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/black-mini-springer-4x4-cb-radio-aerial-with-mag-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/black-mini-springer-4x4-cb-radio-aerial-with-mag-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/black-mini-springer-4x4-cb-radio-aerial-with-mag-mount/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [Poly-bush kit for Toyota Land-cruiser HDJ80 / FZJ80 for the rear axle](https://cbradio.co.uk/product/poly-bush-kit-for-toyota-land-cruiser-hdj80-fzj80-for-the-rear-axle/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **Toyota Land Cruiser HDJ80 4.2 TD Rear Axle Poly Bush Kit – Heavy Duty Polyurethane – Full Kit** **Upgrade Strength • Improve Handling • Built to Last** This **high-quality rear axle poly bush kit** for the **Toyota Land Cruiser HDJ80 4.2 TD** is designed to **improve suspension performance, durability, and control**, especially for **off-road and heavy-duty use**. Manufactured from **premium thermoplastic polyurethane (TPU)** in our **trademark orange finish**, these bushes offer **superior strength and longevity over standard rubber bushes**. --- ### ✅ **What’s Included** ✔ **Radius Arm Bushes (Top & Bottom)** ✔ **Rear Panhard Rod Bushes** ✔ **Complete Fixing Kit (Bolts & Nuts)** ❗ **Does NOT include anti-roll bar bushes** --- ### 🚜 **Designed For** - **Toyota Land Cruiser HDJ80 4.2 TD (80 Series)** - Off-road & overlanding builds - Heavy-duty and towing applications - Suspension upgrades & restorations --- ### 💪 **Why Choose Polyurethane Bushes** ✔ **High Tensile Strength** – handles heavy loads ✔ **Excellent Compression Memory** – maintains shape over time ✔ **Superior Abrasion Resistance** – built for harsh conditions ✔ **Improved Handling & Stability** ✔ **Longer Lifespan vs Rubber Bushes** --- ### 📡 **Where These Fit** - Rear axle **trailing arms (radius arms)** - **Panhard rod** (axle to chassis connection) 👉 Critical components for maintaining **axle alignment and stability**. --- ### ⚙️ **Specifications** - Material: **Thermoplastic Polyurethane (Polyester Based)** - Colour: **Trademark Orange** - Vehicle: **Toyota Land Cruiser HDJ80 4.2 TD** - Kit Weight: **Approx. 3.9kg** - Fitment: **Rear Axle Components** --- ### ⚠️ **Important Notes** ❗ Anti-roll bar bushes **NOT included** ❗ Professional installation recommended ❗ Designed for durability – may feel firmer than standard rubber --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Land Cruiser Parts Available** 👉 Check our shop for: - Front bush kits - Suspension lift kits - Steering components - 4×4 accessories & upgrades --- ### 🔥 **Order Today** **Upgrade your suspension the right way – stronger, tougher, longer lasting.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/poly-bush-kit-for-toyota-land-cruiser-hdj80-fzj80-for-the-rear-axle/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/poly-bush-kit-for-toyota-land-cruiser-hdj80-fzj80-for-the-rear-axle/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/poly-bush-kit-for-toyota-land-cruiser-hdj80-fzj80-for-the-rear-axle/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/poly-bush-kit-for-toyota-land-cruiser-hdj80-fzj80-for-the-rear-axle/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Poly-bush%20kit%20for%20Toyota%20Land-cruiser%20HDJ80%20%2F%20FZJ80%20for%20the%20rear%20axle&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpoly-bush-kit-for-toyota-land-cruiser-hdj80-fzj80-for-the-rear-axle%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/poly-bush-kit-for-toyota-land-cruiser-hdj80-fzj80-for-the-rear-axle/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/poly-bush-kit-for-toyota-land-cruiser-hdj80-fzj80-for-the-rear-axle/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/poly-bush-kit-for-toyota-land-cruiser-hdj80-fzj80-for-the-rear-axle/?share=telegram) - **Product categories:** Land Cruiser --- ### [2 x 12v cigar cigarette lighter plug solder type](https://cbradio.co.uk/product/2-x-12v-cigar-cigarette-lighter-plug-solder-type/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌🚗 **2x 12V Cigarette Lighter Plugs – Solder Type – Unfused DC Power Connector – Car Accessory** **Simple, Reliable Power Connection for Vehicle Accessories** This pack of **2 x 12V cigarette lighter plugs** is ideal for **wiring your own in-car power leads**, offering a **secure and permanent connection** for a wide range of accessories. Designed for **easy installation**, the plug unscrews to allow wiring via **soldering or terminal wrap**. --- ### ✅ **Key Features** ✔ **Pack of 2 Plugs** – great value ✔ **12V DC Compatible** – suitable for most vehicles ✔ **Solder or Wrap Connection** – flexible installation ✔ **Unscrew Design** – quick and easy access ✔ **Compact & Durable Build** --- ### 🚗 **Perfect For** - Car Accessories - CB & Radio Equipment - DIY Wiring Projects - Chargers & Power Leads - Automotive Installations --- ### ⚙️ **Specifications** - Type: **Cigarette Lighter Plug** - Voltage: **12V DC** - Connection: **Solder / Terminal Wrap** - Fuse: **Unfused** - Quantity: **2 Plugs** --- ### ⚠️ **Important Information** ❗ **Unfused design** – suitable for applications where fuse protection is handled elsewhere ❗ Ensure correct polarity when wiring ❗ Professional installation recommended if unsure --- ### 🛠 **Installation Notes** - Unscrew casing to access terminals - Solder or wrap wires securely - Reassemble for a solid, reliable connection --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to wire --- ### 💬 **More Available** 👉 Check our shop for: - Fused plugs & sockets - Power connectors & adaptors - CB & radio accessories - Wiring & installation parts --- ### 🔥 **Order Today** **Reliable power connections made simple.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-x-12v-cigar-cigarette-lighter-plug-solder-type/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-x-12v-cigar-cigarette-lighter-plug-solder-type/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-x-12v-cigar-cigarette-lighter-plug-solder-type/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-x-12v-cigar-cigarette-lighter-plug-solder-type/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%20x%2012v%20cigar%20cigarette%20lighter%20plug%20solder%20type&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-x-12v-cigar-cigarette-lighter-plug-solder-type%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-x-12v-cigar-cigarette-lighter-plug-solder-type/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-x-12v-cigar-cigarette-lighter-plug-solder-type/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-x-12v-cigar-cigarette-lighter-plug-solder-type/?share=telegram) - **Product categories:** Power Connectors --- ### [MB-400 large hatch-back or boot / trunk lip aerial mount](https://cbradio.co.uk/product/mb-400-large-hatch-back-or-boot-trunk-lip-aerial-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚗📡 **MB-400 Heavy Duty Boot Mount – Hatchback / Trunk Lip Aerial Mount – CB & Ham Radio** **Serious Mount for Serious Antennas** The **MB-400 Heavy Duty Boot (Trunk) Mount** is a **professional-grade solution** for mounting CB or amateur radio antennas without drilling your vehicle. Built for strength and stability, this mount is designed to handle **larger, heavier aerials** with ease. --- ### ✅ **Why Choose the MB-400** ✔ **Heavy Duty Construction** – built to handle large antennas ✔ **No Drilling Required** – mounts securely to boot / hatch lip ✔ **Adjustable Fitment** – suits a wide range of vehicles ✔ **Strong & Stable** – ideal for high-speed and mobile use ✔ **Professional Finish Installation** --- ### 📡 **Designed For SO-239 Cable Systems** This mount is designed to be used with **optional SO-239 cable assemblies**, commonly used with amateur radio antennas such as: - NR770R / NR770H - SG7500 - SG7900 - ATAS-120 👉 *(SO-239 cable not included – available in our shop)* --- ### 🚛 **Also Suitable For CB Antennas** Handles larger CB aerials including: - Sirio 3000 - Sirio 4000 👉 Perfect for both **CB and amateur radio setups**. --- ### ⚙️ **Specifications** - Model: **MB-400 Boot / Trunk Mount** - Mount Type: **Hatchback / Boot Lip Clamp** - Connection: **SO-239 Cable Compatible (not included)** - Build: **Heavy Duty Metal Construction** - Fitment: **Adjustable for various vehicles** --- ### ⚠️ **Important Information** ❗ **SO-239 cable NOT included** – required for installation ❗ Ensure correct positioning to avoid damage to vehicle trim ❗ Suitable for heavier antennas – ensure proper installation --- ### 💪 **Built for Performance** Unlike cheaper mounts, the MB-400: - Holds larger antennas securely - Reduces vibration and movement - Provides a stable base for better signal performance --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our shop for: - SO-239 cable assemblies - CB & Ham antennas - Coax cable & connectors - SWR meters & accessories --- ### 🔥 **Order Today** **Heavy duty mount for a clean, professional installation.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mb-400-large-hatch-back-or-boot-trunk-lip-aerial-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mb-400-large-hatch-back-or-boot-trunk-lip-aerial-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mb-400-large-hatch-back-or-boot-trunk-lip-aerial-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mb-400-large-hatch-back-or-boot-trunk-lip-aerial-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MB-400%20large%20hatch-back%20or%20boot%20%2F%20trunk%20lip%20aerial%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmb-400-large-hatch-back-or-boot-trunk-lip-aerial-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mb-400-large-hatch-back-or-boot-trunk-lip-aerial-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mb-400-large-hatch-back-or-boot-trunk-lip-aerial-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mb-400-large-hatch-back-or-boot-trunk-lip-aerial-mount/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [Sirio super 900 blue line mobile CB radio aerial or HAM Antenna](https://cbradio.co.uk/product/sirio-super-900-blue-line-mobile-cb-radio-aerial-or-ham-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔵📡 **Sirio Super 900 Blue Line CB / 10m Mobile Antenna – 27–28.5MHz – N Mount – Compact 5/8 Wave** **Compact Size – Proven Performance – Mythos 900 Successor** The **Sirio Super 900 Blue Line** is the **modern replacement for the popular Mythos 900 series**, offering **excellent performance in a compact design**. With its **5/8 wave configuration and base-loaded coil**, this antenna delivers **strong signal performance while remaining low profile**, making it ideal for vehicles where height is limited. --- ### ✅ **Key Features** ✔ **Successor to Mythos 900 Series** – improved modern design ✔ **5/8 Wave Mobile Antenna** – enhanced performance ✔ **Wide Frequency Coverage (27–28.5 MHz)** – CB & 10m band ✔ **17/7 PH Stainless Steel Spring Whip** – flexible & durable ✔ **180° Adjustable Whip** – easy positioning ✔ **Detachable Whip** – ideal for car washes ✔ **Includes Compact N Mount Base & Cable** ✔ **Tuning Disc for Fine Adjustment** --- ### ⚠️ **Important Note** ❗ **Sirio do NOT supply a PL259 connector with their antenna kits** 👉 A PL259 plug will need to be fitted to the cable --- ### 🚗 **Perfect For** - CB Radio Users - 10 Metre Band Operators - Cars, Vans & Trucks - Low Height / Discreet Installations --- ### 📡 **Performance Highlights** - Strong signal from a **compact 640mm design** - **360° omnidirectional radiation** - Low SWR (≤ 1.2 at resonance) - Wide bandwidth for multi-channel use --- ### ⚙️ **Technical Specifications** - Model: **Sirio Super 900 Blue Line (Mythos 900S Replacement)** - Type: **5/8 Wave Base Loaded Mobile Antenna** - Frequency Range: **27 – 28.5 MHz** - Impedance: **50 Ohm (Unbalanced)** - Polarisation: **Vertical** - Radiation Pattern: **360° Omnidirectional** - Bandwidth (SWR ≤ 2): **≥ 1170 KHz** - SWR at Resonance: **≤ 1.2** - Power Handling: **15W Continuous / 150W Short Burst** - Mount: **Standard N Type (Included)** - Cable: **4 Metres RG58 (Supplied)** - Materials: **Brass, Copper, Nylon, Stainless Steel** - Height: **Approx. 640mm** - Weight: **Approx. 760g** - Mounting Hole: **Ø 12.5 mm** --- ### ⚠️ **Why Choose Sirio** - Trusted **European antenna manufacturer** - Excellent **build quality & reliability** - Designed for **real-world mobile performance** 👉 A **compact alternative to larger antennas without sacrificing too much performance**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install (connector required) --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - PL259 connectors - Mag mounts & brackets - Coax cable & accessories - SWR meters & tuning tools --- ### 🔥 **Order Today** **Compact, powerful, and built to perform.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-super-900-blue-line-mobile-cb-radio-aerial-or-ham-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-super-900-blue-line-mobile-cb-radio-aerial-or-ham-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-super-900-blue-line-mobile-cb-radio-aerial-or-ham-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-super-900-blue-line-mobile-cb-radio-aerial-or-ham-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20super%20900%20blue%20line%20mobile%20CB%20radio%20aerial%20or%20HAM%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-super-900-blue-line-mobile-cb-radio-aerial-or-ham-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-super-900-blue-line-mobile-cb-radio-aerial-or-ham-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-super-900-blue-line-mobile-cb-radio-aerial-or-ham-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-super-900-blue-line-mobile-cb-radio-aerial-or-ham-antenna/?share=telegram) - **Product categories:** CB Aerials with mount, Sirio cb Antennas --- ### [4 x PL259 UHF connector plugs for RG8 coaxial cable mini8](https://cbradio.co.uk/product/4-x-pl259-uhf-connector-plugs-for-rg8-coaxial-cable-mini8/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **4x PL259 Plugs 7mm – UHF Connectors for RG8 / Mini 8 (RG8X) Coax – Solder Type** **Reliable RF Connections – Built to Last** This pack of **4 high-quality PL259 (UHF) plugs** is designed for **RG8 / Mini 8 (RG8X) coaxial cable**, providing a **secure, low-loss connection** for CB and amateur radio installations. Perfect for **repairs, custom cables, or small installs**. --- ### ✅ **Key Features** ✔ **7mm Entry – Ideal for RG8 / Mini 8 (RG8X)** ✔ **Brown Heat-Resistant Insert** – won’t melt during soldering ✔ **Strong, Durable Construction** ✔ **Solder Type Connection** – ensures best signal transfer ✔ **Pack of 4** – perfect for small jobs or spares --- ### ⚠️ **Avoid Cheap Alternatives** Many low-cost PL259 plugs use **white plastic inserts** that: - Melt when soldering - Distort and loosen - Cause unreliable connections 👉 These feature **brown heat-resistant inserts** for **clean, easy installation and long-term reliability**. --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Mobile & Base Stations - Antenna Builds & Repairs --- ### ⚙️ **Specifications** - Connector Type: **PL259 (UHF Male)** - Cable Compatibility: **RG8 / Mini 8 (RG8X) – 7mm** - Connection Type: **Solder** - Insert Type: **Brown Heat Resistant** - Quantity: **4 Plugs** --- ### 🛠 **Installation Notes** - Suitable for standard soldering methods - Works with foam or solid dielectric cable - Provides strong mechanical and electrical connection --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - Coax cable (RG58 / RG8X / RG213) - Antennas & mounts - Adaptors & connectors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Quality connectors for a clean, reliable installation.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-x-pl259-uhf-connector-plugs-for-rg8-coaxial-cable-mini8/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-x-pl259-uhf-connector-plugs-for-rg8-coaxial-cable-mini8/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-x-pl259-uhf-connector-plugs-for-rg8-coaxial-cable-mini8/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-x-pl259-uhf-connector-plugs-for-rg8-coaxial-cable-mini8/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20x%20PL259%20UHF%20connector%20plugs%20for%20RG8%20coaxial%20cable%20mini8&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-x-pl259-uhf-connector-plugs-for-rg8-coaxial-cable-mini8%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-x-pl259-uhf-connector-plugs-for-rg8-coaxial-cable-mini8/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-x-pl259-uhf-connector-plugs-for-rg8-coaxial-cable-mini8/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-x-pl259-uhf-connector-plugs-for-rg8-coaxial-cable-mini8/?share=telegram) - **Product categories:** PL259 Connectors --- ### [CB Radio Mic Compact 4 Pin Uniden Wiring microphone President Midland TTi CRT](https://cbradio.co.uk/product/cb-radio-mic-compact-4-pin-uniden-wiring-microphone-president-midland-tti-crt/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤📡 **Compact CB Radio Microphone – Ergonomic Hand Mic – Heavy Duty & High Performance** **Small Size – Big Performance** This **compact CB radio microphone** is designed to deliver **clear audio, durability, and comfort**, making it the perfect upgrade or replacement for your CB setup. Despite its compact size, it offers **excellent performance and a solid, reliable feel in the hand**. --- ### ✅ **Key Features** ✔ **Compact & Lightweight Design** – easy to handle and store ✔ **Ergonomic Shape** – comfortable for long use ✔ **Clear Audio Transmission** – strong, crisp sound quality ✔ **Sturdy Construction** – built to last ✔ **Responsive PTT (Push-To-Talk) Button** ✔ **Ideal Replacement Mic** for most CB radios --- ### 🎤 **Designed for Real Use** - Comfortable grip for **long conversations** - Durable enough for **daily mobile or base use** - Compact size makes it perfect for **tight cab spaces** --- ### 🚗 **Perfect For** - CB Radio Users - Truckers & HGV Drivers - 4×4 & Off-Road Vehicles - Base Stations - Replacement or Upgrade Mic --- ### ⚙️ **Specifications** - Type: **CB Radio Hand Microphone** - Design: **Compact / Ergonomic** - Function: **PTT (Push-To-Talk)** - Build: **Heavy Duty Construction** *(Please check compatibility with your radio before purchase)* --- ### ⚠️ **Why Upgrade Your Microphone?** A poor mic can cause: - Weak or unclear transmission - Background noise issues - Uncomfortable use 👉 This mic ensures **clear communication and comfortable operation**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - CB radios & accessories - Antennas & mounts - Coax cable & connectors - Mic extensions & adaptors --- ### 🔥 **Order Today** **Compact. Comfortable. Built to perform.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-mic-compact-4-pin-uniden-wiring-microphone-president-midland-tti-crt/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-mic-compact-4-pin-uniden-wiring-microphone-president-midland-tti-crt/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-mic-compact-4-pin-uniden-wiring-microphone-president-midland-tti-crt/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-mic-compact-4-pin-uniden-wiring-microphone-president-midland-tti-crt/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Mic%20Compact%204%20Pin%20Uniden%20Wiring%20microphone%20President%20Midland%20TTi%20CRT&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-mic-compact-4-pin-uniden-wiring-microphone-president-midland-tti-crt%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-mic-compact-4-pin-uniden-wiring-microphone-president-midland-tti-crt/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-mic-compact-4-pin-uniden-wiring-microphone-president-midland-tti-crt/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-mic-compact-4-pin-uniden-wiring-microphone-president-midland-tti-crt/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [Sirio antenna Super 9 blue line mobile CB aerial kit](https://cbradio.co.uk/product/sirio-antenna-super-9-blue-line-mobile-cb-aerial-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔵📡 **Sirio Super 9 Blue Line CB Antenna Kit – 27–28.5MHz Mobile Aerial – N Mount – 1.55m** **Next Generation Performance – Replaces the Mythos 9000** The **Sirio Super 9 Blue Line** is a **high-performance mobile CB & 10m antenna**, designed as the **successor to the popular Mythos 9000**. Factory tuned for convenience but still adjustable for fine tuning, this antenna delivers **excellent performance, flexibility, and durability** in one complete kit. --- ### ✅ **Key Features** ✔ **Factory Tuned – Ready to Use** ✔ **Wide Frequency Coverage (27–28.5 MHz)** – CB & 10m band ✔ **17/7 PH Tapered Stainless Steel Whip** – strong & flexible ✔ **180° Adjustable Whip** – easy positioning ✔ **Quick Detach for Car Washes** ✔ **Complete Kit with N Mount & Cable** ✔ **Safety Set Included** --- ### ⚠️ **Important Note** ❗ **Sirio do NOT supply a PL259 connector with their antenna kits** 👉 You will need to fit a PL259 to the cable for your radio connection --- ### 🚗 **Perfect For** - CB Radio Users - 10 Metre Band Operators - Cars, Vans & Trucks - Daily Driving & Long Distance Use --- ### 📡 **Performance Highlights** - Covers full **27–28.5 MHz range** - Wide bandwidth (**≥ 1900 KHz / approx. 170 channels**) - **Low SWR capability** for efficient transmission - Stable performance in mobile conditions --- ### ⚙️ **Technical Specifications** - Model: **Sirio Super 9 Blue Line** - Type: **Base Loaded Mobile Antenna** - Frequency Range: **27 – 28.5 MHz** - Impedance: **50 Ohms** - Polarisation: **Linear Vertical** - Bandwidth (SWR ≤ 2): **≥ 1900 KHz** - Power Handling: **35W Continuous / 250W Short Burst** - Mount: **Standard N Type (Included)** - Cable: **4 Metres RG58 (Supplied)** - Materials: **Brass, Copper, Nylon & Stainless Steel** - Height: **Approx. 1550mm (1.55m)** - Weight: **Approx. 420g** - Mounting Hole Size: **Ø 12.5 mm** --- ### ⚠️ **Why Choose Sirio** - Trusted **European antenna manufacturer** - Excellent **build quality & performance** - Designed for **real-world mobile use** 👉 A **reliable upgrade from older models like the Mythos 9000**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install (connector required) --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - PL259 connectors - Mounts & brackets - Coax cable & accessories - SWR meters & tuning tools --- ### 🔥 **Order Today** **Modern design. Proven performance. Built for the road.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-antenna-super-9-blue-line-mobile-cb-aerial-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-antenna-super-9-blue-line-mobile-cb-aerial-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-antenna-super-9-blue-line-mobile-cb-aerial-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-antenna-super-9-blue-line-mobile-cb-aerial-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20antenna%20Super%209%20blue%20line%20mobile%20CB%20aerial%20kit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-antenna-super-9-blue-line-mobile-cb-aerial-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-antenna-super-9-blue-line-mobile-cb-aerial-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-antenna-super-9-blue-line-mobile-cb-aerial-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-antenna-super-9-blue-line-mobile-cb-aerial-kit/?share=telegram) - **Product categories:** CB Aerials with mount, Sirio cb Antennas --- ### [Sirio antenna Carbonium 27 mobile CB radio aerial with cable and mount](https://cbradio.co.uk/product/sirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📡🚗 **Sirio Carbonium 27 CB Mobile Antenna – 27–28.5MHz – Complete with Cable & Mount – 1.13m** **Premium Italian Design – Performance, Flexibility & Style** The **Sirio Carbonium 27** is a **high-quality mobile CB & 10m antenna**, designed for **strong performance, durability, and ease of use**. With its **sleek tapered stainless steel whip and adjustable tilt**, it’s perfect for both **everyday driving and demanding conditions**. --- ### ✅ **Key Features** ✔ **Wide Frequency Coverage** – 27 to 28.5 MHz (CB & 10m band) ✔ **Base Loaded Design** – efficient performance ✔ **17/7 PH Tapered Stainless Steel Whip** – strong & flexible ✔ **180° Adjustable Inclination** – perfect positioning ✔ **Quick Detach Whip** – ideal for car washes ✔ **Supplied with Cable & Mount** – ready to install ✔ **Suitable for Magnetic Mount Use** --- ### ⚠️ **Important Note** ❗ **Sirio do NOT supply a PL259 connector with this antenna** 👉 You will need to fit your own PL259 to suit your setup --- ### 🚗 **Perfect For** - CB Radio Users - 10 Metre Band Operators - Cars, Vans & Trucks - Mobile Installations - Daily & Long Distance Use --- ### 📡 **Performance You Can Trust** - Excellent transmit & receive across **27–28.5 MHz** - Designed for **stable mobile performance** - Adjustable angle helps optimise positioning --- ### ⚙️ **Specifications** - Model: **Sirio Carbonium 27** - Antenna Type: **Base Loaded Mobile** - Frequency Range: **27 – 28.5 MHz** - Whip Material: **17/7 PH Stainless Steel (Tapered)** - Materials: **Brass, Copper, Nylon, Stainless Steel** - Height: **Approx. 1130mm (1.13m)** - Weight: **Approx. 480g** - Cable: **4 Metres RG58 (pre-fitted)** - Mount: **Included** - Adjustment: **180° Tilt / Inclination** --- ### ⚠️ **Why Choose Sirio** - Proven **European brand quality** - Excellent **build and performance** - Reliable in all weather conditions 👉 A **step above cheaper alternatives**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install (connector required) --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - PL259 connectors - Mag mounts & brackets - Coax cable & accessories - CB radios & SWR meters --- ### 🔥 **Order Today** **Performance, flexibility, and quality – all in one antenna.** ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20antenna%20Carbonium%2027%20mobile%20CB%20radio%20aerial%20with%20cable%20and%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-antenna-carbonium-27-mobile-cb-radio-aerial-with-cable-and-mount/?share=telegram) - **Product categories:** CB Aerials with mount, Sirio cb Antennas --- ### [4 pin microphone mic in-line connector locking mike socket](https://cbradio.co.uk/product/4-pin-microphone-mic-in-line-connector-locking-mike-socket/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎤🔌 **4 Pin Microphone Inline Socket – Locking Mic Connector – CB Radio Mic Extension Plug** **Strong, Reliable Mic Connection – Ideal for Extensions & Repairs** This **high-quality 4 pin inline microphone socket** is perfect for **making mic extension leads, repairs, or custom wiring**, providing a **secure locking connection** for CB radio microphones. Built with **solid construction**, it ensures long-term reliability in both mobile and base station setups. --- ### ✅ **Key Features** ✔ **4 Pin Microphone Inline Socket** ✔ **Locking Connector Design** – secure, no accidental disconnection ✔ **Ideal for Mic Extension Leads** ✔ **Solid, Durable Construction** ✔ **Compact & Easy to Install** --- ### 🎤 **Perfect For** - CB Radio Microphones - Mic Extension Leads - Repairs & Replacements - Custom Installations - Workshop & DIY Builds --- ### ⚙️ **Specifications** - Connector Type: **4 Pin Microphone Socket (Inline)** - Connection: **Solder Type** - Design: **Locking Mechanism** - Build: **Heavy Duty / Solid Construction** --- ### 🛠 **Installation Notes** - Suitable for standard CB microphone wiring - Requires soldering for installation - Ideal for extending mic cable length cleanly --- ### ⚠️ **Why Choose a Quality Mic Connector** Cheap connectors can: - Cause intermittent audio - Loosen over time - Fail under regular use 👉 This connector provides a **secure, stable audio connection every time**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - Microphones & accessories - CB radios & antennas - Coax cable & connectors - Adaptors & installation parts --- ### 🔥 **Order Today** **Clear audio starts with a solid connection.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-pin-microphone-mic-in-line-connector-locking-mike-socket/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-pin-microphone-mic-in-line-connector-locking-mike-socket/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-pin-microphone-mic-in-line-connector-locking-mike-socket/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-pin-microphone-mic-in-line-connector-locking-mike-socket/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20pin%20microphone%20mic%20in-line%20connector%20locking%20mike%20socket&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-pin-microphone-mic-in-line-connector-locking-mike-socket%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-pin-microphone-mic-in-line-connector-locking-mike-socket/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-pin-microphone-mic-in-line-connector-locking-mike-socket/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-pin-microphone-mic-in-line-connector-locking-mike-socket/?share=telegram) - **Product categories:** Microphone Plugs --- ### [Weld on antenna aerial mounting bracket roll cage bull bar unfinished 2mm steel](https://cbradio.co.uk/product/weld-on-antenna-aerial-mounting-bracket-roll-cage-bull-bar-unfinished-2mm-steel/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔧🚙 **Weld-On CB Antenna Mount Bracket – 2mm Steel – Roll Cage / Bull Bar – Unfinished** **Heavy Duty Mounting Solution – No Drilling Required** This **2mm steel weld-on antenna bracket** is the ideal solution for securely mounting your **CB or radio aerial** without drilling into your vehicle. Perfect for **4x4s, off-road builds, and vehicles with soft tops**, this bracket is designed to be **welded directly onto roll cages, bull bars, or custom setups**. --- ### ✅ **Key Features** ✔ **Heavy Duty 2mm Steel Construction** ✔ **Weld-On Design** – strong, permanent fit ✔ **No Roof Drilling Required** ✔ **Ideal for Roll Cages & Bull Bars** ✔ **Designed for Dome Mount Compatibility** ✔ **Unfinished Steel** – ready for paint or coating --- ### 🚜 **Perfect For** - 4×4 & Off-Road Vehicles - Roll Cage Installations - Bull Bars / Nudge Bars - Soft Top Vehicles - Custom Builds --- ### ⚙️ **Specifications** - Material: **2mm Steel** - Finish: **Un-treated (Bare Steel)** - Mount Type: **Weld-On** - Compatibility: **CB / Radio Antenna Mounts (Dome Mount Ready)** --- ### ⚠️ **Important Information** ❗ **This is unfinished steel** – requires painting or coating to prevent rust ❗ **Dome mount shown in last picture is NOT included** ❗ Professional welding recommended for best results --- ### 📡 **Why Choose This Bracket** - Stronger than bolt-on alternatives - Clean, professional install - Ideal for vehicles where drilling isn’t an option - Built specifically for **UK 4×4 applications** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready for fabrication --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - Dome mounts & cable kits - CB antennas & aerials - Coax cable & connectors - Full installation kits --- ### 🔥 **Order Today** **Strong. Simple. Built for off-road use.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/weld-on-antenna-aerial-mounting-bracket-roll-cage-bull-bar-unfinished-2mm-steel/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/weld-on-antenna-aerial-mounting-bracket-roll-cage-bull-bar-unfinished-2mm-steel/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/weld-on-antenna-aerial-mounting-bracket-roll-cage-bull-bar-unfinished-2mm-steel/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/weld-on-antenna-aerial-mounting-bracket-roll-cage-bull-bar-unfinished-2mm-steel/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Weld%20on%20antenna%20aerial%20mounting%20bracket%20roll%20cage%20bull%20bar%20unfinished%202mm%20steel&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fweld-on-antenna-aerial-mounting-bracket-roll-cage-bull-bar-unfinished-2mm-steel%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/weld-on-antenna-aerial-mounting-bracket-roll-cage-bull-bar-unfinished-2mm-steel/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/weld-on-antenna-aerial-mounting-bracket-roll-cage-bull-bar-unfinished-2mm-steel/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/weld-on-antenna-aerial-mounting-bracket-roll-cage-bull-bar-unfinished-2mm-steel/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [s-vhs mini DIN 4 pin male in line plug solder connector SVHS](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-male-in-line-plug-solder-connector-svhs/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🎥🔌 **S-VHS Mini DIN 4 Pin Male Plug – S-Video Inline Connector – Solder Type with Strain Relief** **Reliable S-Video Connection – Ideal for Repairs & Custom Leads** This **4 Pin Mini DIN (S-Video) Male Inline Plug** is perfect for **repairing or building S-VHS / S-Video cables**, providing a **secure and reliable connection** for video applications. Designed with a **durable plastic housing and built-in strain relief**, it ensures a long-lasting, professional finish. --- ### ✅ **Key Features** ✔ **4 Pin Mini DIN (S-Video) Male Connector** ✔ **Inline Solder Type** – ideal for custom cable builds ✔ **Durable Plastic Housing** ✔ **Integrated Strain Relief** – protects cable from damage ✔ **Compact & Lightweight Design** --- ### 🎥 **Perfect For** - S-Video / S-VHS Cable Repairs - Custom Cable Builds - AV Equipment Connections - CCTV & Video Systems - Retro Gaming & Video Devices --- ### ⚙️ **Specifications** - Connector Type: **Mini DIN 4 Pin (Male)** - Format: **S-Video / S-VHS** - Connection Type: **Solder** - Housing: **Plastic with Strain Relief** - Poles: **4 Pin** --- ### 🛠 **Installation Notes** - Requires soldering for cable termination - Suitable for standard S-Video cable types - Provides a neat, secure inline connection --- ### ⚠️ **Why Choose Quality Connectors** Cheap connectors can: - Break easily - Cause poor signal quality - Lead to unreliable connections 👉 This connector ensures a **clean, stable video signal** and long-term durability. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **More Available** 👉 Check our shop for: - AV connectors & adaptors - Coax & data cables - CB & radio accessories - Electrical connectors & fittings --- ### 🔥 **Order Today** **Fix it properly – build it to last.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-male-in-line-plug-solder-connector-svhs/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-male-in-line-plug-solder-connector-svhs/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-male-in-line-plug-solder-connector-svhs/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-male-in-line-plug-solder-connector-svhs/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20s-vhs%20mini%20DIN%204%20pin%20male%20in%20line%20plug%20solder%20connector%20SVHS&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fs-vhs-mini-din-4-pin-male-in-line-plug-solder-connector-svhs%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-male-in-line-plug-solder-connector-svhs/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-male-in-line-plug-solder-connector-svhs/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/s-vhs-mini-din-4-pin-male-in-line-plug-solder-connector-svhs/?share=telegram) - **Product categories:** RF Adaptors --- ### [3 x 12v 24v DC Hella Type BMW or Scania Accessory Power plug DIN plug](https://cbradio.co.uk/product/3-x-12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌🚗 **Pack of 3 Hella DIN Power Plugs 12V/24V – BMW / Scania Type – Motorcycle Car Caravan Truck** **Professional Power Connection – Compact, Reliable & Versatile** This **pack of 3 high-quality Hella / DIN (Continental) power plugs** provides a **secure and compact DC connection**, ideal for a wide range of vehicles and applications. Commonly used in **BMW motorcycles and Scania trucks**, these plugs offer a **more reliable and tighter fit than standard cigarette lighter plugs**. --- ### ✅ **Why Choose Hella DIN Plugs** ✔ **Compact & Secure Fit** – won’t vibrate loose like standard plugs ✔ **12V & 24V Compatible** – suitable for cars, trucks & more ✔ **High Quality Construction** – built for long-term use ✔ **Screw Terminal Connections** – easy, secure wiring ✔ **Pack of 3** – great value --- ### 🚗 **Perfect For** - Motorcycles (BMW type sockets) - Cars & Vans - Trucks (Scania type sockets) - Caravans & Camper Vans - Boats & Marine Use - Powering accessories (chargers, GPS, radios, etc.) --- ### ⚙️ **Specifications** - Type: **Hella / DIN / Continental Power Plug** - Voltage: **12V / 24V DC** - Max Current: **15A** - Connection: **Screw Terminals** - Quantity: **Pack of 3** --- ### ⚠️ **Why Upgrade from Standard Plugs?** Standard cigarette lighter plugs: - Can come loose - Lose connection on rough roads - Are bulkier 👉 Hella DIN plugs provide a **firm, reliable connection every time**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to wire --- ### 💬 **More Available** 👉 Check our shop for: - Power sockets & adaptors - CB & radio accessories - Connectors & wiring solutions - Vehicle installation parts --- ### 🔥 **Order Today** **Reliable power connection for any vehicle setup.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-x-12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-x-12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-x-12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-x-12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%20x%2012v%2024v%20DC%20Hella%20Type%20BMW%20or%20Scania%20Accessory%20Power%20plug%20DIN%20plug&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-x-12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-x-12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-x-12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-x-12v-24v-dc-hella-type-bmw-or-scania-accessory-power-plug-din-plug/?share=telegram) - **Product categories:** Power Connectors, Truck Stuff --- ### [PL259 Coax UHF 10 x Plugs 9mm for RG213 coax pack of 10](https://cbradio.co.uk/product/pl259-coax-uhf-10-x-plugs-9mm-for-rg213-coax-pack-of-10/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **10x PL259 Plugs 9mm – UHF Connectors for RG213 Coax – Heavy Duty – Pack of 10** **Professional Quality Connectors – Built for Maximum Performance** This pack of **10 premium PL259 (UHF) plugs** is designed specifically for **RG213 coaxial cable (9mm)**, ensuring a **strong, low-loss connection** for demanding CB and amateur radio installations. Ideal for **high-power setups and professional installs** where reliability matters. --- ### ✅ **Why These PL259 Plugs Are Better** ✔ **9mm Entry – Perfect for RG213 Coax** ✔ **Brown Heat-Resistant Insert** – won’t melt during soldering ✔ **Heavy Duty Construction** – ideal for thicker cable ✔ **Solder Type Connection** – ensures maximum signal transfer ✔ **Pack of 10** – excellent value --- ### ⚠️ **Avoid Cheap Alternatives** Low-quality PL259 plugs often use **white plastic inserts** that: - Melt when soldering - Deform under heat - Cause poor or unreliable connections 👉 These feature **brown heat-resistant inserts**, making installation **cleaner, easier, and more reliable**. --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Base Stations - High Power Setups - Antenna Builds & Repairs --- ### ⚙️ **Specifications** - Connector Type: **PL259 (UHF Male)** - Cable Compatibility: **RG213 (9mm)** - Connection Type: **Solder** - Insert Type: **Brown Heat Resistant** - Quantity: **10 Plugs** --- ### 🛠 **Installation Notes** - Suitable for standard soldering installation - Designed for RG213 and similar 9mm coax cables - Provides strong mechanical and electrical connection --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Trusted seller --- ### 💬 **More Radio Gear Available** 👉 Don’t forget to check our shop for: - Coax cable (RG58 / RG8X / RG213) - Antennas & mounts - Adaptors & connectors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Heavy duty connectors for serious installations – do it right first time.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-coax-uhf-10-x-plugs-9mm-for-rg213-coax-pack-of-10/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-coax-uhf-10-x-plugs-9mm-for-rg213-coax-pack-of-10/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-coax-uhf-10-x-plugs-9mm-for-rg213-coax-pack-of-10/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-coax-uhf-10-x-plugs-9mm-for-rg213-coax-pack-of-10/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PL259%20Coax%20UHF%2010%20x%20Plugs%209mm%20for%20RG213%20coax%20pack%20of%2010&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-coax-uhf-10-x-plugs-9mm-for-rg213-coax-pack-of-10%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-coax-uhf-10-x-plugs-9mm-for-rg213-coax-pack-of-10/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-coax-uhf-10-x-plugs-9mm-for-rg213-coax-pack-of-10/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-coax-uhf-10-x-plugs-9mm-for-rg213-coax-pack-of-10/?share=telegram) - **Product categories:** PL259 Connectors --- ### [2" suspension lift kit raise your Toyota LandCruiser HDJ-80 by 5cm](https://cbradio.co.uk/product/2-suspension-lift-kit-raise-your-toyota-landcruiser-hdj-80-by-5cm/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚙🔧 **2″ Suspension Lift Kit Toyota Land Cruiser HDJ80 – Pedders TrakRyder Shocks & Heavy Duty Springs** ⚠️ **PLEASE RING FIRST TO CHECK STOCK BEFORE PURCHASING** ⚠️ --- ### **Upgrade Your Land Cruiser – Strength, Height & Control** This **complete 2” suspension lift kit** for the **Toyota Land Cruiser HDJ80** is designed to deliver **improved ground clearance, handling, and load capacity**, making it ideal for **off-road use, towing, and heavy-duty applications**. Built using **Pedders TrakRyder components**, this kit offers **reliability in both on-road comfort and harsh off-road conditions**. --- ### ✅ **Complete Kit – Everything You Need** ✔ **2 x Pedders Foam Cell Sealed Front Struts (9521)** ✔ **2 x Pedders Foam Cell Sealed Rear Shocks (9522)** ✔ **2 x Heavy Duty Front Coil Springs (7702)** ✔ **2 x Heavy Duty Rear Coil Springs (7745)** 👉 A **full suspension upgrade kit** – not just parts. --- ### 📈 **Lift & Ride Height** - Front Ride Height: **Approx. 780mm (with 16” wheels)** - Rear Ride Height: **Approx. 800mm (with 16” wheels)** - Lift: **Approx. 2 Inches** ⚠️ *Heights based on standard vehicle – accessories like winches, bumpers, or roof loads may affect final height.* 👉 **Contact us for spring upgrades if your vehicle is heavily equipped.** --- ### 🛠 **TrakRyder Foam Cell Technology** Pedders **TrakRyder dampers (9521 & 9522)** are engineered for **maximum durability and control**, even in extreme conditions. ✔ **Foam Cell Technology** – reduces shock fade ✔ **Consistent Performance** under load and heat ✔ **Ideal for Off-Road & Heavy Use** ✔ **Improved Stability & Handling** --- ### 🚜 **Perfect For** - Off-Road & Overlanding - Towing & Load Carrying - 4×4 Enthusiasts - Land Cruiser Restoration & Upgrades --- ### ⚠️ **Important Information** - Designed for **Toyota Land Cruiser HDJ80** - Professional fitting recommended - Additional weight (winch, bumper, etc.) may require **different spring ratings** - We can supply **standard height kits** if required --- ### 📦 **UK Stock & Dispatch** ✔ UK supplied ✔ Secure delivery ✔ Support available before & after purchase ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-suspension-lift-kit-raise-your-toyota-landcruiser-hdj-80-by-5cm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-suspension-lift-kit-raise-your-toyota-landcruiser-hdj-80-by-5cm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-suspension-lift-kit-raise-your-toyota-landcruiser-hdj-80-by-5cm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-suspension-lift-kit-raise-your-toyota-landcruiser-hdj-80-by-5cm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%22%20suspension%20lift%20kit%20raise%20your%20Toyota%20LandCruiser%20HDJ-80%20by%205cm&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-suspension-lift-kit-raise-your-toyota-landcruiser-hdj-80-by-5cm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-suspension-lift-kit-raise-your-toyota-landcruiser-hdj-80-by-5cm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-suspension-lift-kit-raise-your-toyota-landcruiser-hdj-80-by-5cm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-suspension-lift-kit-raise-your-toyota-landcruiser-hdj-80-by-5cm/?share=telegram) - **Product categories:** Land Cruiser --- ### [Sirio KF3/8 CB aerial Antenna Adaptor (Volvo Adaptor) Volvo antenna converter](https://cbradio.co.uk/product/sirio-kf3-8-cb-aerial-antenna-adaptor-volvo-adaptor-volvo-antenna-converter/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌🚛 **CB Aerial Adaptor – Volvo Mount to 3/8 Thread Converter – Sirio Gutter Mount Compatible** **Convert Your Volvo Aerial Mount to Standard 3/8 Fitting** This **CB aerial adaptor** is a simple but essential solution that allows you to **convert the standard Volvo aerial mount into a 3/8 thread**, making it compatible with a wide range of **CB antennas**. Perfect for upgrading your setup without replacing the entire mount. --- ### ✅ **Why You Need This Adaptor** ✔ **Converts Volvo Aerial Mount to 3/8 Thread** ✔ **Compatible with Most CB Antennas** ✔ **Strong & Reliable Connection** ✔ **Simple Installation – No Hassle** ✔ **Ideal for Upgrades & Conversions** --- ### 🚛 **Perfect For** - Volvo Trucks - HGV / Lorry Installations - CB Radio Upgrades - Replacing Non-Standard Mounts --- ### ⚙️ **Important Fitment Info** 🔧 **For Volvo Mount Conversion:** 👉 You only need the **3/8 to M6 adaptor** *(as shown in the first 3 pictures)* 🔧 **For Sirio Gutter Mount Conversion:** 👉 You will need the **complete assembly** *(as shown in the last picture)* --- ### 📡 **Why Convert to 3/8 Thread?** The **3/8 fitting is the industry standard** for CB antennas, giving you access to: - Springer antennas - Whip antennas - Heavy duty trucker aerials 👉 This adaptor opens up far more antenna options. --- ### ⚠️ **Avoid Compatibility Issues** Without the correct adaptor: - Antennas won’t fit properly - Poor connections can affect performance - Installation becomes difficult 👉 This ensures a **secure, correct fit first time**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Complete Your Setup** 👉 Check our other listings for: - CB antennas (Springers, Whips, Heavy Duty) - Mounts & brackets - Coax cable & connectors - Full installation kits --- ### 🔥 **Order Today** **Convert it. Fit it. Get back on the air.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-kf3-8-cb-aerial-antenna-adaptor-volvo-adaptor-volvo-antenna-converter/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-kf3-8-cb-aerial-antenna-adaptor-volvo-adaptor-volvo-antenna-converter/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-kf3-8-cb-aerial-antenna-adaptor-volvo-adaptor-volvo-antenna-converter/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-kf3-8-cb-aerial-antenna-adaptor-volvo-adaptor-volvo-antenna-converter/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20KF3%2F8%20CB%20aerial%20Antenna%20Adaptor%20%28Volvo%20Adaptor%29%20Volvo%20antenna%20converter&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-kf3-8-cb-aerial-antenna-adaptor-volvo-adaptor-volvo-antenna-converter%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-kf3-8-cb-aerial-antenna-adaptor-volvo-adaptor-volvo-antenna-converter/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-kf3-8-cb-aerial-antenna-adaptor-volvo-adaptor-volvo-antenna-converter/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-kf3-8-cb-aerial-antenna-adaptor-volvo-adaptor-volvo-antenna-converter/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [Male DV winkle plug 6mm for use with the new sirio type DV mounts](https://cbradio.co.uk/product/male-dv-winkle-plug-6mm-for-use-with-the-new-sirio-type-dv-mounts/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌📡 **Male DV Winkle Plug 6mm – Sirio Type DV Mount Connector – CB Radio Aerial Fitting** **Perfect Fit for New Sirio DV Mount Systems** This **Male DV Winkle Plug (6mm)** is designed specifically for use with **new Sirio-style DV mounts and dome mounts**, providing a **secure, reliable connection** for your CB antenna setup. Ideal for replacing worn connectors or completing a fresh installation. --- ### ✅ **Key Features** ✔ **Compatible with Sirio DV & Dome Mounts** ✔ **6mm Cable Entry** – suits standard coax sizes ✔ **Strong, Reliable Connection** ✔ **Compact “Winkle” Design** – neat and secure fit ✔ **Easy Installation** – ideal for DIY or professional setups --- ### 📡 **Perfect For** - CB Radio Installations - Mobile Antenna Mounts - Sirio DV Mount Systems - Repairs & Upgrades --- ### ⚙️ **Specifications** - Connector Type: **Male DV Winkle Plug** - Compatibility: **Sirio DV / Dome Mounts** - Cable Size: **6mm Coax (e.g. RG58)** - Application: **Antenna Mount Connection** --- ### ⚠️ **Why Choose Quality Connectors** Poor quality connectors can cause: - Signal loss - Intermittent connections - Installation issues 👉 This plug ensures a **solid, dependable connection every time**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to fit --- ### 💬 **More Available** 👉 Check our other listings for: - DV mounts & fittings - Coax cable (RG58 / RG8X / RG213) - Antennas & accessories - Adaptors & connectors --- ### 🔥 **Order Today** **Get your installation right – first time.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/male-dv-winkle-plug-6mm-for-use-with-the-new-sirio-type-dv-mounts/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/male-dv-winkle-plug-6mm-for-use-with-the-new-sirio-type-dv-mounts/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/male-dv-winkle-plug-6mm-for-use-with-the-new-sirio-type-dv-mounts/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/male-dv-winkle-plug-6mm-for-use-with-the-new-sirio-type-dv-mounts/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Male%20DV%20winkle%20plug%206mm%20for%20use%20with%20the%20new%20sirio%20type%20DV%20mounts&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmale-dv-winkle-plug-6mm-for-use-with-the-new-sirio-type-dv-mounts%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/male-dv-winkle-plug-6mm-for-use-with-the-new-sirio-type-dv-mounts/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/male-dv-winkle-plug-6mm-for-use-with-the-new-sirio-type-dv-mounts/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/male-dv-winkle-plug-6mm-for-use-with-the-new-sirio-type-dv-mounts/?share=telegram) - **Product categories:** RF Adaptors --- ### [CB radio Frequency chart SS low to SS High full colour](https://cbradio.co.uk/product/cb-radio-frequency-chart-ss-low-to-ss-high-full-colour/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 📊📡 **CB Radio Frequency Chart – SS Low to SS High – Full Colour Laminated – A–G Bands + UK FM** **Clear, Accurate & Built to Last – Essential for Every CB User** This **full colour CB radio frequency chart** covers **Super Low to Super High bands (A–G)**, making it an essential reference for anyone using radios like the **Superstar 3900** and similar multi-band rigs. Designed to be **easy to read at a glance**, this chart is one of the **clearest available on eBay**. --- ### ✅ **Why This Chart Stands Out** ✔ **Full Coverage** – From **25.615 MHz (SS Low)** to **28.755 MHz (SS High)** ✔ **Bands A–G Clearly Displayed** – Perfect for multi-band radios ✔ **UK FM Channels Included** – Separate colour band for quick reference ✔ **Full Colour Print** – Easy to read, even in low light ✔ **Laminated Finish** – Durable, wipe clean & long lasting ✔ **High Quality Production** – Printed using professional equipment --- ### 📡 **Perfect For** - CB Radio Enthusiasts - Superstar 3900 & Similar Radios - Truckers & Mobile Users - Base Station Operators - Beginners Learning Bands --- ### 🖨 **Premium Quality Print** - Printed on **high quality paper** - Produced using a **Xerox ColorQube 8900** for sharp detail - **Laminated for durability** – protects against wear, dirt & moisture --- ### 📊 **What’s Included** - Full **SS Low to SS High frequency range** - Complete **A–G band layout** - **UK FM channel frequencies** in separate colour section - Clear, structured layout for quick reference --- ### ⚠️ **Why You Need One** Without a clear chart: - Band navigation becomes confusing - Frequencies are harder to track - Mistakes are more likely 👉 This chart keeps everything **simple, clear, and accessible**. --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to use --- ### 💬 **More Available** 👉 Check our other listings for: - CB radios & accessories - Antennas & mounts - Coax cable & connectors - **Amateur Radio Band Plans** --- ### 🔥 **Order Today** **A must-have reference for every CB operator.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-frequency-chart-ss-low-to-ss-high-full-colour/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-frequency-chart-ss-low-to-ss-high-full-colour/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-frequency-chart-ss-low-to-ss-high-full-colour/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-frequency-chart-ss-low-to-ss-high-full-colour/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20radio%20Frequency%20chart%20SS%20low%20to%20SS%20High%20full%20colour&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-frequency-chart-ss-low-to-ss-high-full-colour%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-frequency-chart-ss-low-to-ss-high-full-colour/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-frequency-chart-ss-low-to-ss-high-full-colour/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-frequency-chart-ss-low-to-ss-high-full-colour/?share=telegram) - **Product categories:** CB radio Accessories --- ### [pl259 6mm UHF pl plug for rg58 coax pack of 10 plugs](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🔌 **10x PL259 Plugs 6mm – UHF Connectors for RG58 Coax – Solder Type – Pack of 10** **Reliable Connections – Built for CB & Ham Radio Performance** This pack of **10 high-quality PL259 (UHF) plugs** is specifically designed for **RG58 coaxial cable (6mm)**, providing a **secure, low-loss connection** for all your radio installations. Ideal for both **professional installers and hobbyists** who want dependable results every time. --- ### ✅ **Why Choose These PL259 Plugs** ✔ **6mm Entry – Perfect for RG58 Coax** ✔ **Brown Heat-Resistant Insert** – won’t melt during soldering ✔ **Strong, Durable Construction** – built to last ✔ **Solder Type Connection** – ensures maximum signal transfer ✔ **Pack of 10** – excellent value for multiple installs --- ### ⚠️ **Avoid Cheap Alternatives** Low-quality PL259 plugs often use **white plastic inserts** that: - Melt when soldering - Distort under heat - Lead to weak or unreliable connections 👉 These feature **premium brown inserts**, designed for **clean, hassle-free soldering** and long-term reliability. --- ### 📡 **Perfect For** - CB Radio Installations - Amateur (Ham) Radio - Mobile Setups - Base Stations - Antenna Builds & Repairs --- ### ⚙️ **Specifications** - Connector Type: **PL259 (UHF Male)** - Cable Compatibility: **RG58 (6mm)** - Connection Type: **Solder** - Insert Type: **Brown Heat Resistant** - Quantity: **10 Plugs** --- ### 🛠 **Installation Notes** - Designed for standard soldering installation - Suitable for RG58 coax (solid or foam dielectric) - Provides strong mechanical and electrical connection --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Trusted seller --- ### 💬 **More Radio Gear Available** 👉 Don’t forget to check our other listings for: - Coax cables (RG58 / RG8X / RG213) - Antennas & mounts - Adaptors & connectors - CB & Ham radio accessories --- ### 🔥 **Order Today** **Do it once, do it right – avoid cheap connectors that fail.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20pl259%206mm%20UHF%20pl%20plug%20for%20rg58%20coax%20pack%20of%2010%20plugs&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-6mm-uhf-pl-plug-for-rg58-coax-pack-of-10-plugs/?share=telegram) - **Product categories:** PL259 Connectors --- ### [Taxi aerial mag mount Private Hire PMR Radio Antenna kit BNC connector VHF](https://cbradio.co.uk/product/taxi-aerial-mag-mount-private-hire-pmr-radio-antenna-kit-bnc-connector-vhf/) **Published:** February 13, 2020 **Author:** Jan **Content:** ## 🚖 **Taxi Aerial Mag Mount Kit – TX-6 VHF PMR Radio Antenna – BNC Connector – Private Hire** **Professional Quality Taxi / Private Hire Antenna – Built for Reliable Communication** The **TX-6 VHF Taxi Antenna Kit** is a **high-performance 1/4 wave magnetic mount aerial**, designed specifically for **taxi radios, private hire vehicles, and PMR systems** operating in the **VHF band (164–174 MHz)**. If your radio signal drops — you lose jobs. 👉 This antenna is built to keep you connected. --- ### ✅ **Complete Ready-to-Use Kit** ✔ High quality **1/4 wave VHF antenna** ✔ Strong **3.5” (9cm) magnetic mount** – excellent grip even at speed ✔ **Approx. 4 metres RG58 coax cable** pre-wired ✔ **BNC connector fitted** – plug straight into your radio ✔ Durable **black anodised steel whip** --- ### 📡 **Why This Antenna Works** - **Optimised for Taxi Frequencies (164–174 MHz)** - **Low SWR (< 1.5:1)** for efficient transmission - **Strong magnetic base** keeps antenna secure on the roof - **Flexible whip design** – ideal for daily commercial use - **Waterproof base** for all-weather reliability --- ### 🚖 **Perfect For** - Taxi Radios - Private Hire Vehicles - PMR / Business Radios - Fleet Vehicles - Dispatch Systems --- ### ⚙️ **Technical Specifications (TX-6)** - Antenna Type: **1/4 Wave** - Frequency Range: **164–174 MHz (VHF)** - Length: **51cm** - SWR: **< 1.5:1** - Mount Type: **3/8” x 24 Thread** - Cable: **Approx. 4m RG58** - Connector: **BNC** - Base: **3.5” Magnetic (Waterproof)** --- ### ⚠️ **Don’t Risk Poor Reception** Cheap antennas can result in: - Missed calls - Weak transmit range - Lost work 👉 **Reliable comms = more jobs.** This is a **proven, dependable setup used by taxi drivers daily.** --- ### 📦 **Fast UK Dispatch** ✔ Ships from the UK ✔ Secure packaging ✔ Ready to install --- ### 💬 **Need Advice?** Not sure if this fits your radio? Send us a message — we’ll make sure you get the right setup. --- ### 🔥 **Order Yours Today** **No signal = No work. Stay connected. Stay earning.** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/taxi-aerial-mag-mount-private-hire-pmr-radio-antenna-kit-bnc-connector-vhf/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/taxi-aerial-mag-mount-private-hire-pmr-radio-antenna-kit-bnc-connector-vhf/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/taxi-aerial-mag-mount-private-hire-pmr-radio-antenna-kit-bnc-connector-vhf/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/taxi-aerial-mag-mount-private-hire-pmr-radio-antenna-kit-bnc-connector-vhf/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Taxi%20aerial%20mag%20mount%20Private%20Hire%20PMR%20Radio%20Antenna%20kit%20BNC%20connector%20VHF&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftaxi-aerial-mag-mount-private-hire-pmr-radio-antenna-kit-bnc-connector-vhf%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/taxi-aerial-mag-mount-private-hire-pmr-radio-antenna-kit-bnc-connector-vhf/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/taxi-aerial-mag-mount-private-hire-pmr-radio-antenna-kit-bnc-connector-vhf/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/taxi-aerial-mag-mount-private-hire-pmr-radio-antenna-kit-bnc-connector-vhf/?share=telegram) - **Product categories:** Taxi Aerials --- ### [RG213 50cm RF patch jumper lead for CB or Ham radio PL259](https://cbradio.co.uk/product/rg213-50cm-rf-patch-jumper-lead-for-cb-or-ham-radio-pl259/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG213 50cm Patch Lead PL259** is a **high-quality low loss jumper lead**, handmade using **mil-spec RG213U coax** for **maximum performance and durability**. Perfect for **short connections** where signal quality matters. --- ## 📡 Low Loss Performance ✔ Built using **RG213U mil-spec coax** ✔ Minimal signal loss ✔ Ideal for high-performance setups --- ## 📏 Compact 50cm Length ✔ Perfect for short interconnects ✔ Keeps setup neat and tidy ✔ Reduces excess cable clutter --- ## 🔌 PL259 Connectors Fitted ✔ Standard UHF connectors ✔ Compatible with SO239 sockets ✔ Plug-and-play --- ## ⚡ High Power Ready ✔ Suitable for high power applications ✔ Ideal for amplifiers and base stations ✔ Reliable under load --- ## 🔧 Perfect For Connections Between: - Radio → SWR meter - SWR meter → antenna feed - Radio → amplifier (burner) - Bench testing setups --- ## 💪 Built to Last ✔ Thick, durable RG213 cable ✔ Strong shielding ✔ Hand-assembled for quality --- ## 📻 Multi-Use Applications Perfect for: - CB radio - Amateur (ham) radio - RF testing - General coax interconnects --- ## 📦 What You Get ✔ 1 x RG213 50cm Patch Lead PL259 --- ## Key Features - 50cm RG213 patch lead - Low loss coax - PL259 connectors fitted - High power capable - Compact and tidy --- ## Why Choose This Lead? ✔ Best performance for short runs ✔ Strong and durable ✔ Ideal for high power setups ✔ Clean installation --- ## Ideal For - Shack setups - Mobile installs - SWR meter connections - Amplifier connections --- ## Straight Talking If you’re running high power, don’t choke it with thin cable — use this. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg213-50cm-rf-patch-jumper-lead-for-cb-or-ham-radio-pl259/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg213-50cm-rf-patch-jumper-lead-for-cb-or-ham-radio-pl259/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg213-50cm-rf-patch-jumper-lead-for-cb-or-ham-radio-pl259/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg213-50cm-rf-patch-jumper-lead-for-cb-or-ham-radio-pl259/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG213%2050cm%20RF%20patch%20jumper%20lead%20for%20CB%20or%20Ham%20radio%20PL259&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg213-50cm-rf-patch-jumper-lead-for-cb-or-ham-radio-pl259%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg213-50cm-rf-patch-jumper-lead-for-cb-or-ham-radio-pl259/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg213-50cm-rf-patch-jumper-lead-for-cb-or-ham-radio-pl259/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg213-50cm-rf-patch-jumper-lead-for-cb-or-ham-radio-pl259/?share=telegram) - **Product categories:** Patch Leads --- ### [4 Pin CB Radio Microphone – Cobra / Uniden / Superstar | Coffin Style Replacement Mic](https://cbradio.co.uk/product/cb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **4 Pin Coffin CB Microphone (Uniden Wired)** is a **reliable replacement hand mic**, designed for **clear audio and dependable performance** across many CB radios. Built in the popular **coffin-style housing**, it’s comfortable, durable, and ready to go. --- ## 🎤 Classic Coffin Design ✔ Ergonomic handheld shape ✔ Large push-to-talk (PTT) button ✔ Comfortable for everyday use --- ## 🔌 4 Pin Uniden Wiring ✔ Pre-wired for **Uniden-style 4 pin radios** ✔ Plug-and-play for compatible models ✔ No rewiring required --- ## 📻 Wide Compatibility Suitable for radios using Uniden wiring, including: - Cobra - Uniden - Superstar ✔ Always check wiring before purchase --- ## 🔊 Clear Audio Output ✔ Omni-directional dynamic microphone ✔ Good voice clarity ✔ Reliable transmit audio --- ## 📏 Flexible Coiled Cable ✔ **6ft curly lead** ✔ Expands when needed ✔ Retracts to keep install tidy --- ## 💪 Built for Daily Use ✔ Rubberised cable ✔ Durable housing ✔ Designed for mobile environments --- ## 🔁 Important Note on Branding ✔ Supplied mic may have **different branding/label** ✔ Same design and performance guaranteed --- ## 🔧 Other Options Available ✔ Different wiring types ✔ Unwired versions ➡️ See our other listings --- ## Technical Specifications - **Type:** Omni-directional dynamic - **Sensitivity:** -76dB ±4dB - **Impedance:** 500Ω @ 1kHz - **Frequency Response:** 200–5 kHz - **Cable:** 6ft coiled (3 core + 1 shield) --- ## 📦 What You Get ✔ 1 x 4 Pin Coffin CB Microphone (Uniden Wired) --- ## Key Features - 4 pin Uniden wired mic - Coffin-style design - Dynamic microphone - Coiled 6ft cable - Plug-and-play --- ## Why Choose This Mic? ✔ Easy replacement solution ✔ Clear and reliable audio ✔ Comfortable to use ✔ Great value --- ## Ideal For - CB radio users - Truck and mobile setups - Replacement microphones - Everyday communication --- ## Straight Talking If your mic is crackling, cutting out, or dead — this fixes it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20Pin%20CB%20Radio%20Microphone%20%E2%80%93%20Cobra%20%2F%20Uniden%20%2F%20Superstar%20%7C%20Coffin%20Style%20Replacement%20Mic&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-mic-replacement-hand-microphone-4-pin-cobra-uniden-superstar-wired/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [RG8 Patch Lead 100cm 50 Ohm mini8 Coax 1m jumper lead](https://cbradio.co.uk/product/rg8-patch-lead-100cm-50-ohm-mini8-coax-1m-jumper-lead/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **1m RG8 Mini-8 Patch Lead** is a **high-quality low loss jumper cable**, perfect for **short connections between radios, SWR meters, and accessories**. Built using **premium Mini-8 (RG8X) coax**, it offers **excellent performance with great flexibility**. --- ## 📡 Low Loss Performance ✔ Similar electrical performance to RG213 ✔ Lower loss than standard RG58 ✔ Ideal for clean signal transfer --- ## 🔧 Flexible & Easy to Use ✔ Slim design (similar to RG58) ✔ Easy to route in tight spaces ✔ Perfect for compact setups --- ## 📏 Ideal 1 Metre Length ✔ **100cm jumper lead** ✔ Perfect for: - Radio to SWR meter - SWR meter to antenna feed - Short interconnects --- ## 💪 High Quality Build ✔ Premium Mini-8 (RG8X) coax ✔ Durable outer sheath ✔ Reliable connectors --- ## 📻 Multi-Use Applications Perfect for: - CB radio setups - Amateur (ham) radio - Bench testing - Shack installations --- ## 🔌 Ready to Use ✔ Pre-made patch lead ✔ No soldering required ✔ Plug-and-play --- ## ⚠️ Important Note ✔ Listing is for **patch lead only** ✔ Additional cable shown in images is for illustration purposes --- ## 📦 What You Get ✔ 1 x 1m RG8 Mini-8 Patch Lead --- ## Key Features - 1m RG8 Mini-8 jumper lead - Low loss coax - Flexible design - Ideal for short runs - Ready to use --- ## Why Choose This Lead? ✔ Better performance than RG58 ✔ More flexible than RG213 ✔ Perfect for tight installs ✔ Great quality --- ## Ideal For - CB radio users - Amateur radio setups - SWR meter connections - Shack wiring --- ## Straight Talking Short cable, big difference — this keeps your setup clean and efficient. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg8-patch-lead-100cm-50-ohm-mini8-coax-1m-jumper-lead/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg8-patch-lead-100cm-50-ohm-mini8-coax-1m-jumper-lead/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg8-patch-lead-100cm-50-ohm-mini8-coax-1m-jumper-lead/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg8-patch-lead-100cm-50-ohm-mini8-coax-1m-jumper-lead/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RG8%20Patch%20Lead%20100cm%2050%20Ohm%20mini8%20Coax%201m%20jumper%20lead&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg8-patch-lead-100cm-50-ohm-mini8-coax-1m-jumper-lead%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg8-patch-lead-100cm-50-ohm-mini8-coax-1m-jumper-lead/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg8-patch-lead-100cm-50-ohm-mini8-coax-1m-jumper-lead/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg8-patch-lead-100cm-50-ohm-mini8-coax-1m-jumper-lead/?share=telegram) - **Product categories:** Patch Leads --- ### [Quick Fist Original vehicle tool mount Clamp](https://cbradio.co.uk/product/quick-fist-original-vehicle-tool-mount-clamp/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Quick Fist Original Tool Mount Clamps (Pair)** are **heavy-duty rubber clamps**, designed to **secure tools and equipment safely in vehicles, workshops, and outdoor setups**. Originally developed for the 4×4 market, they’re now widely used in **emergency services, recovery vehicles, vans, and tool storage systems**. --- ## 🔒 Secure Hold for Multiple Items ✔ Holds objects **25mm to 57mm diameter** ✔ Suitable for: - Tools (spades, axes, hammers) - Pipes and poles - Cables and hoses ✔ Keeps gear secure but easy to access --- ## 💪 Heavy Duty EPDM Rubber ✔ Made from **EPDM (same material as tyres)** ✔ Resistant to: - Heat and cold - UV exposure - Saltwater and fresh water ✔ Built for extreme conditions --- ## 🚗 Designed for Vehicle Use Perfect for: - 4×4 and off-road vehicles - Vans and tool racks - Recovery trucks - Emergency vehicles ✔ Keeps equipment organised and secure --- ## ⚖️ Strong Load Capacity ✔ **11kg per clamp** ✔ **23kg per pair** ✔ Reliable support for most tools --- ## 🔧 Easy Installation ✔ Mount with **M4 bolts, screws or fixings** ✔ Mounting area: **70 x 20mm** ✔ Quick release and re-attach --- ## 🌧 All Weather Performance ✔ Works in rain, mud, heat, and cold ✔ Won’t crack or degrade like plastic mounts --- ## 📦 What You Get ✔ 2 x Quick Fist Original Tool Mount Clamps (Pair) ✔ Installation instructions --- ## Key Features - Holds 25–57mm diameter items - EPDM rubber construction - Weather and UV resistant - Easy to install - Pair of clamps included --- ## Why Choose Quick Fist? ✔ Genuine product — not cheap copies ✔ Proven durability ✔ Versatile mounting solution ✔ Trusted in professional use --- ## Ideal For - Off-road enthusiasts - Tradespeople - Van tool storage - Emergency and recovery vehicles --- ## Straight Talking If you don’t want tools rolling around your vehicle — this is the proper fix. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/quick-fist-original-vehicle-tool-mount-clamp/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/quick-fist-original-vehicle-tool-mount-clamp/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/quick-fist-original-vehicle-tool-mount-clamp/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/quick-fist-original-vehicle-tool-mount-clamp/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Quick%20Fist%20Original%20vehicle%20tool%20mount%20Clamp&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fquick-fist-original-vehicle-tool-mount-clamp%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/quick-fist-original-vehicle-tool-mount-clamp/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/quick-fist-original-vehicle-tool-mount-clamp/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/quick-fist-original-vehicle-tool-mount-clamp/?share=telegram) - **Product categories:** Land Rover --- ### [Single Metal Microphone Mike Holder mic Clip with screws CB Taxi HAM Radio](https://cbradio.co.uk/product/single-metal-microphone-mike-holder-mic-clip-with-screws-cb-taxi-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Metal CB Microphone Clip** is a **strong, chrome-finished mic holder**, designed to **secure your microphone neatly in place**. A simple but essential accessory for any **CB, taxi, or amateur radio setup**. --- ## 🎤 Universal Fit ✔ Compatible with **most CB radio microphones** ✔ Suitable for standard mic handles ✔ Versatile use across different radios --- ## 💪 Solid Metal Construction ✔ Durable metal build ✔ Chrome finish ✔ Long-lasting and hard-wearing ✔ Won’t snap like plastic clips --- ## 🔧 Easy Installation ✔ Fixes to dashboard, console or panel ✔ **Mounting screws included** ✔ Quick and secure fitting --- ## 🚗 Keep Your Cab Tidy ✔ Prevents mic from dropping ✔ Keeps it within easy reach ✔ Clean, organised install --- ## 📻 Multi-Use Perfect for: - CB radios - Taxi radios - Amateur (ham) radios - Work vehicles --- ## 📦 What You Get ✔ 1 x Metal CB Microphone Clip ✔ Mounting screws --- ## Key Features - Metal microphone holder - Chrome finish - Universal compatibility - Screws included - Simple installation --- ## Why Choose This Clip? ✔ Strong and reliable ✔ Easy to fit ✔ Fits most microphones ✔ Great value --- ## Ideal For - Replacement mic clips - New installs - Vehicle radio setups - Keeping your cab organised --- ## Straight Talking It’s a small part — but without it, your mic ends up on the floor. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/single-metal-microphone-mike-holder-mic-clip-with-screws-cb-taxi-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/single-metal-microphone-mike-holder-mic-clip-with-screws-cb-taxi-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/single-metal-microphone-mike-holder-mic-clip-with-screws-cb-taxi-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/single-metal-microphone-mike-holder-mic-clip-with-screws-cb-taxi-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Single%20Metal%20Microphone%20Mike%20Holder%20mic%20Clip%20with%20screws%20CB%20Taxi%20HAM%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsingle-metal-microphone-mike-holder-mic-clip-with-screws-cb-taxi-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/single-metal-microphone-mike-holder-mic-clip-with-screws-cb-taxi-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/single-metal-microphone-mike-holder-mic-clip-with-screws-cb-taxi-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/single-metal-microphone-mike-holder-mic-clip-with-screws-cb-taxi-ham-radio/?share=telegram) - **Product categories:** CB radio Accessories --- ### [Ceramic Rear Brake Pads Toyota Landcruiser 4.2 VX HDJ80 1HD-T 90/98](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98-2/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Ceramic Rear Brake Pads for Land Cruiser HDJ80** are **high-quality aftermarket pads**, designed for the **Toyota Land Cruiser HDJ80**. Built to **meet or exceed OE standards**, these pads deliver **strong, reliable braking performance** with reduced dust and noise. --- ## 🚙 Direct Fit for HDJ80 ✔ Designed for **4.2 TD (1HD-T) models** ✔ Fits rear axle ✔ Straight replacement --- ## 🛑 Strong Braking Performance ✔ Excellent stopping power ✔ Consistent braking under load ✔ Reliable in all driving conditions --- ## 🔇 Low Noise Operation ✔ Ceramic compound reduces brake noise ✔ Smooth braking feel ✔ Less vibration --- ## 🧼 Low Dust Formula ✔ Cleaner wheels ✔ Reduced brake dust build-up ✔ Ideal for daily and off-road use --- ## 💪 High Quality Materials ✔ Ceramic compound construction ✔ Heat resistant ✔ Long-lasting performance --- ## 🔧 Easy Installation ✔ Direct replacement fit ✔ Suitable for DIY or workshop fitting ✔ No modifications required --- ## 📦 What You Get ✔ 1 x Rear brake pad set (both sides) --- ## Key Features - Ceramic rear brake pads - HDJ80 fitment - OE quality or better - Low dust & low noise - Durable construction --- ## Why Choose These Pads? ✔ Better braking performance ✔ Cleaner and quieter ✔ Long-lasting ✔ Great value --- ## Ideal For - Land Cruiser 80 Series owners - Daily driving - Off-road vehicles - Maintenance and upgrades --- ## Straight Talking Good brakes aren’t optional — these do the job properly without the mess. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98-2/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98-2/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98-2/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98-2/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Ceramic%20Rear%20Brake%20Pads%20Toyota%20Landcruiser%204.2%20VX%20HDJ80%201HD-T%2090%2F98&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98-2%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98-2/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98-2/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98-2/?share=telegram) - **Product categories:** Land Cruiser --- ### [MINI8 20M CB Ham Radio Coax Low Loss RG8X 65FT 50 Ohm cable only](https://cbradio.co.uk/product/mini8-20m-cb-ham-radio-coax-low-loss-rg8x-65ft-50-ohm-cable-only/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini-8 RG8X 20m Coax Cable** is a **high-quality low loss 50Ω feeder**, offering **performance close to RG213** but with the **flexibility of RG58**. Perfect for **longer runs where flexibility and low loss both matter**. --- ## 📡 Low Loss Performance ✔ Similar electrical performance to RG213 ✔ Lower loss than standard RG58 ✔ Ideal for longer cable runs --- ## 🔧 Flexible & Easy to Install ✔ Slim **~6.1mm diameter** ✔ Easy to route through tight spaces ✔ Perfect for mobile or base installs --- ## 💪 High Quality Construction ✔ Plain copper inner conductor ✔ Foam polyethylene dielectric ✔ **95% copper braid shielding** ✔ Low smoke PVC outer sheath ✔ Built properly — not cheap cable --- ## 📏 20 Metre Length ✔ Ideal for medium to long runs ✔ Great balance of performance and usability --- ## 📶 Strong Shielding ✔ Screening effectiveness **>55dB (100–900 MHz)** ✔ Reduces interference ✔ Cleaner signal transmission --- ## ⚙️ Technical Specifications - **Length:** 20m - **Impedance:** 50 Ohm - **Diameter:** ~6.1mm - **Capacitance:** 80pF/m - **Velocity Ratio:** 80% **Attenuation (dB/100m):** - 50 MHz – 7.2 - 100 MHz – 10.5 - 400 MHz – 22.2 - 600 MHz – 27.6 - 860 MHz – 33.9 - 1000 MHz – 37.0 - 2400 MHz – 64.5 --- ## 📻 Multi-Use Applications Perfect for: - CB radio - Amateur (ham) radio - Scanner systems - General RF applications --- ## 🔁 Other Lengths Available ✔ 10m / 15m / 20m / 25m / 30m / 40m ✔ Also available: RG58 & RG213 --- ## ⚖️ Why Choose Mini-8 (RG8X)? ✔ Better performance than RG58 ✔ More flexible than RG213 ✔ Ideal all-round cable --- ## Key Features - Mini-8 RG8X coax - 20m length - Low loss design - Flexible construction - 50 Ohm impedance --- ## Why Choose This Cable? ✔ Best balance of flexibility & performance ✔ Easy to install ✔ Reliable quality ✔ Great value --- ## Ideal For - Base station installs - Mobile setups - Long cable runs - Tight routing situations --- ## Straight Talking If RG213 is too thick and RG58 too lossy — this is the perfect middle ground. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini8-20m-cb-ham-radio-coax-low-loss-rg8x-65ft-50-ohm-cable-only/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini8-20m-cb-ham-radio-coax-low-loss-rg8x-65ft-50-ohm-cable-only/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini8-20m-cb-ham-radio-coax-low-loss-rg8x-65ft-50-ohm-cable-only/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini8-20m-cb-ham-radio-coax-low-loss-rg8x-65ft-50-ohm-cable-only/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MINI8%2020M%20CB%20Ham%20Radio%20Coax%20Low%20Loss%20RG8X%2065FT%2050%20Ohm%20cable%20only&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini8-20m-cb-ham-radio-coax-low-loss-rg8x-65ft-50-ohm-cable-only%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini8-20m-cb-ham-radio-coax-low-loss-rg8x-65ft-50-ohm-cable-only/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini8-20m-cb-ham-radio-coax-low-loss-rg8x-65ft-50-ohm-cable-only/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini8-20m-cb-ham-radio-coax-low-loss-rg8x-65ft-50-ohm-cable-only/?share=telegram) - **Product categories:** RG8 mini8 --- ### [Mini Springer Stinger CB Antenna Large Washer Body Mounting Kit CB Radio Aerial](https://cbradio.co.uk/product/mini-springer-stinger-cb-antenna-large-washer-body-mounting-kit-cb-radio-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini Springer Stinger CB Antenna Kit with Roof Stud Mount** is a **complete plug-and-play aerial solution**, giving you **everything needed for a clean roof-mounted CB installation**. Built around the popular **Tornado Mini Stinger**, this kit is **tough, reliable, and ready to fit**. --- ## 📦 Complete Kit – Everything Included ✔ Mini Springer (Tornado Stinger) antenna ✔ Roof stud mount (large washer type) ✔ **4m RG58 coax cable** ✔ **PL259 plug fitted** ✔ No need to buy separate parts --- ## 📡 Proven Mini Springer Performance ✔ Pre-tuned for **27–28 MHz CB band** ✔ Full 80 channel coverage ✔ Reliable transmit and receive --- ## 📏 Compact & Practical Size ✔ Length: **~90cm** ✔ Ideal for everyday driving ✔ Reduced risk of hitting obstacles --- ## 💪 Heavy Duty Springer Design ✔ Flexible open coil base ✔ Absorbs knocks and vibration ✔ Perfect for mobile use --- ## 🔩 Roof Stud Mount (Large Washer Type) ✔ Strong, secure mounting ✔ Ideal for roof installations ✔ Good grounding for performance --- ## 🔌 Ready to Install ✔ **4 metres RG58 coax included** ✔ PL259 fitted for easy connection ✔ Straightforward installation --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Suitable for standard and high-power setups --- ## 🚗 Ideal For - Cars and vans - 4×4 vehicles - Daily drivers - Clean roof installs --- ## 🔧 Technical Specifications **Antenna:** - Frequency: 27–28 MHz - Length: ~90cm - VSWR: ≤ 1.5:1 - Power: 1000W - Fitting: 3/8″ male **Mount Kit:** - Type: Roof stud mount (large washer) - Coax: 4m RG58 - Connector: PL259 --- ## Key Features - Complete CB antenna kit - Mini springer aerial - Roof stud mounting system - 4m coax with PL259 - Ready to install --- ## Why Choose This Kit? ✔ Everything in one box ✔ Easy installation ✔ Reliable performance ✔ Great value --- ## Ideal For - First-time CB installs - Upgrading existing setups - Clean, permanent installations - Everyday mobile use --- ## Straight Talking If you want a **proper roof-mounted CB setup without messing about buying parts**, this is it. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-stinger-cb-antenna-large-washer-body-mounting-kit-cb-radio-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-stinger-cb-antenna-large-washer-body-mounting-kit-cb-radio-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-stinger-cb-antenna-large-washer-body-mounting-kit-cb-radio-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-stinger-cb-antenna-large-washer-body-mounting-kit-cb-radio-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20Springer%20Stinger%20CB%20Antenna%20Large%20Washer%20Body%20Mounting%20Kit%20CB%20Radio%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-stinger-cb-antenna-large-washer-body-mounting-kit-cb-radio-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-stinger-cb-antenna-large-washer-body-mounting-kit-cb-radio-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-stinger-cb-antenna-large-washer-body-mounting-kit-cb-radio-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-stinger-cb-antenna-large-washer-body-mounting-kit-cb-radio-aerial/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [4 pin coffin CB Radio microphone cybernet wired replacement mic](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-cybernet-wired-replacement-mic/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **4 Pin Coffin CB Microphone (Cybernet Wired)** is a **classic handheld replacement mic**, designed for **clear audio and reliable performance** on radios using **Cybernet-style 4-pin wiring**. --- ## 🎤 Classic “Coffin” Design ✔ Comfortable handheld shape ✔ Large push-to-talk button ✔ Easy, familiar operation --- ## 🔌 4 Pin Cybernet Wiring ✔ Pre-wired for **Cybernet 4-pin radios** ✔ Plug-and-play for compatible models ✔ No rewiring required ❗ **Different from Uniden wiring – please check before purchase** --- ## 📻 Typical Compatibility Suitable for many radios using **Cybernet wiring** (varies by model/brand). If unsure, compare your existing mic wiring or contact us. --- ## 🔊 Clear Audio Output ✔ Omni-directional dynamic microphone ✔ Good voice pickup ✔ Reliable transmit clarity --- ## 📏 Coiled Flexible Cable ✔ **6ft curly lead** ✔ Extends when needed ✔ Retracts to keep things tidy --- ## 💪 Built for Daily Use ✔ Rubberised cable ✔ Durable housing ✔ Designed for mobile environments --- ## 🔧 Other Options Available ✔ Different wiring types (Uniden, etc.) ✔ Without plug for custom wiring ➡️ See our other listings --- ## Technical Specifications - **Type:** Omni-directional dynamic - **Sensitivity:** -76dB ±4dB - **Impedance:** 500Ω @ 1kHz - **Frequency Response:** 200–5 kHz - **Cable:** 6ft coiled (3 core + 1 shield) --- ## 📦 What You Get ✔ 1 x 4 Pin Coffin CB Microphone (Cybernet Wired) --- ## Key Features - 4 pin Cybernet wired mic - Classic coffin design - Dynamic microphone - Coiled 6ft cable - Plug-and-play (compatible radios) --- ## Why Choose This Mic? ✔ Simple replacement solution ✔ Clear, reliable audio ✔ Comfortable to use ✔ Great value --- ## Ideal For - CB radio users - Replacement microphones - Truck and mobile installs - Restoring older radios --- ## Straight Talking Wrong wiring = no transmit. Check first — then this will work perfectly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-cybernet-wired-replacement-mic/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-cybernet-wired-replacement-mic/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-cybernet-wired-replacement-mic/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-cybernet-wired-replacement-mic/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20pin%20coffin%20CB%20Radio%20microphone%20cybernet%20wired%20replacement%20mic&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-pin-coffin-cb-radio-microphone-cybernet-wired-replacement-mic%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-cybernet-wired-replacement-mic/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-cybernet-wired-replacement-mic/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-pin-coffin-cb-radio-microphone-cybernet-wired-replacement-mic/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [6 Core PIN 1.8m Black Coiled Flexible Microphone Mic Lead Cable CB Radio HAM](https://cbradio.co.uk/product/6-core-pin-1-8m-black-coiled-flexible-microphone-mic-lead-cable-cb-radio-ham/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **6 Core Coiled Microphone Lead Cable** is a **flexible replacement mic cable**, ideal for repairing or replacing worn-out leads on **CB and amateur radio microphones**. --- ## 🔌 6 Core + Screen Configuration ✔ **5 conductors + 1 screen** ✔ Suitable for most CB and ham mic wiring ✔ Supports PTT and audio functions --- ## 🔄 Coiled Flexible Design ✔ Extends up to **1.8 metres** ✔ Retracts neatly when not in use ✔ Reduces cable clutter --- ## 💪 Durable Construction ✔ Strong outer sheath ✔ Flexible spiral design ✔ Built for repeated use --- ## 🔧 Ideal for Repairs & Replacements Perfect if: - Mic cable is damaged - Wiring has failed - You’re refurbishing a microphone --- ## 🎤 Multi-Use Compatibility ✔ CB radio microphones ✔ Amateur radio mics ✔ Custom wiring projects --- ## ⚙️ Easy to Work With ✔ Suitable for soldering ✔ Flexible internal cores ✔ Ideal for DIY repairs --- ## 📏 Cable Length ✔ **1.8m fully extended** ✔ Compact when coiled --- ## 📦 What You Get ✔ 1 x 6 Core Coiled Microphone Lead Cable --- ## Key Features - 6 core (5 + screen) cable - Coiled flexible design - Extends to 1.8m - Ideal for mic repairs - Durable construction --- ## Why Choose This Cable? ✔ Simple repair solution ✔ Flexible and tidy ✔ Works with many radios ✔ Great value --- ## Ideal For - CB radio users - Amateur radio operators - DIY repairs - Spare or replacement cable --- ## Straight Talking If your mic lead is cracked or cutting out, this is the fix. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/6-core-pin-1-8m-black-coiled-flexible-microphone-mic-lead-cable-cb-radio-ham/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/6-core-pin-1-8m-black-coiled-flexible-microphone-mic-lead-cable-cb-radio-ham/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/6-core-pin-1-8m-black-coiled-flexible-microphone-mic-lead-cable-cb-radio-ham/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/6-core-pin-1-8m-black-coiled-flexible-microphone-mic-lead-cable-cb-radio-ham/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%206%20Core%20PIN%201.8m%20Black%20Coiled%20Flexible%20Microphone%20Mic%20Lead%20Cable%20CB%20Radio%20HAM&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F6-core-pin-1-8m-black-coiled-flexible-microphone-mic-lead-cable-cb-radio-ham%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/6-core-pin-1-8m-black-coiled-flexible-microphone-mic-lead-cable-cb-radio-ham/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/6-core-pin-1-8m-black-coiled-flexible-microphone-mic-lead-cable-cb-radio-ham/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/6-core-pin-1-8m-black-coiled-flexible-microphone-mic-lead-cable-cb-radio-ham/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [Comprehensive CB / HAM radio frequency chart 10 and 11 meter free band](https://cbradio.co.uk/product/comprehensive-cb-ham-radio-frequency-chart-10-and-11-meter-free-band/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Laminated CB Radio Frequency Chart** is a **clear, full-colour reference guide**, covering an **extended frequency range from 25.165 MHz to 30.105 MHz**. Perfect for anyone running **multi-band or export radios**, giving you **quick access to all channels and bands at a glance**. --- ## 📡 Wide Frequency Coverage ✔ **25.165 MHz → 30.105 MHz** ✔ Covers **Bands A to J** ✔ Ideal for expanded CB setups --- ## 📊 Clear & Easy to Read ✔ One of the **clearest charts available** ✔ Well laid out frequency bands ✔ Quick reference during operation --- ## 🖨 High Quality Print ✔ Printed using **Xerox ColorQube 8900** ✔ Full colour for easy identification ✔ Sharp and durable print quality --- ## 💪 Laminated for Durability ✔ Protected against wear and tear ✔ Wipe clean surface ✔ Built for long-term use --- ## 📻 Perfect for Popular Radios Ideal for radios such as: - Magnum DeltaForce S9 - Magnum Omegaforce S9 - Magnum 257 ✔ Great companion for multi-band rigs --- ## 📌 Essential Shack Accessory ✔ Keep on your desk or wall ✔ Quick band reference ✔ Helps avoid confusion when switching bands --- ## 📦 What You Get ✔ 1 x Laminated CB Radio Frequency Chart --- ## Key Features - Full colour laminated chart - Bands A–J coverage - 25.165–30.105 MHz range - Durable and wipe clean - Clear layout --- ## Why Choose This Chart? ✔ Easy to read ✔ Covers extended frequencies ✔ Built to last ✔ Great value --- ## Ideal For - CB radio users - Export radio owners - Amateur radio enthusiasts - Shack setups --- ## Straight Talking If you’re running a multi-band radio without one of these, you’re guessing. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/comprehensive-cb-ham-radio-frequency-chart-10-and-11-meter-free-band/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/comprehensive-cb-ham-radio-frequency-chart-10-and-11-meter-free-band/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/comprehensive-cb-ham-radio-frequency-chart-10-and-11-meter-free-band/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/comprehensive-cb-ham-radio-frequency-chart-10-and-11-meter-free-band/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Comprehensive%20CB%20%2F%20HAM%20radio%20frequency%20chart%2010%20and%2011%20meter%20free%20band&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcomprehensive-cb-ham-radio-frequency-chart-10-and-11-meter-free-band%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/comprehensive-cb-ham-radio-frequency-chart-10-and-11-meter-free-band/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/comprehensive-cb-ham-radio-frequency-chart-10-and-11-meter-free-band/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/comprehensive-cb-ham-radio-frequency-chart-10-and-11-meter-free-band/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [U caller call fox bird extremely loud external speaker](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Weatherproof External Speaker for U-Caller** is a **high-output outdoor speaker**, designed to **boost the volume and range of your U-caller remote setup**. Perfect for **field use, hides, and open environments** where built-in speakers just aren’t enough. --- ## 🔊 Loud & Effective Output ✔ **12W power output** ✔ Clear and strong sound projection ✔ Designed for outdoor use --- ## 🌳 Ideal for Outdoor Setups Perfect for: - Hunting hides - Field setups - Wall or fence mounting - Open terrain use ✔ Pushes sound further where it matters --- ## 📡 Extended Calling Range ✔ Up to **½ mile sound projection** (conditions dependent) ✔ Improves effectiveness of your caller setup --- ## 🌧 Weatherproof & Durable ✔ Built for outdoor conditions ✔ Resistant to rain and damp ✔ Robust housing --- ## 🔧 Easy Installation ✔ Adjustable mounting bracket ✔ Mount to walls, posts or hides ✔ Position for best sound direction --- ## 🔌 Plug & Play Connection ✔ **3m cable included** ✔ **3.5mm jack connection** ✔ Quick and simple setup --- ## ⚠️ Important Compatibility Note ❗ Best performance with **dedicated caller units (like U-caller)** ❗ Phones/tablets may produce lower volume ➡️ Their internal amplifiers are not powerful enough --- ## 📦 What You Get ✔ 1 x Weatherproof External Speaker for U-Caller ✔ Mounting bracket ✔ 3m cable with 3.5mm jack --- ## Technical Specifications - **Power:** 12W - **Impedance:** 8 Ohm - **Cable Length:** 3 metres - **Connector:** 3.5mm jack - **Use:** Outdoor / weatherproof --- ## Key Features - Loud 12W output - Weatherproof design - 3m cable included - Adjustable mounting bracket - Designed for U-caller systems --- ## Why Choose This Speaker? ✔ Boosts your caller performance ✔ Built for outdoor use ✔ Easy to install ✔ Reliable and robust --- ## Ideal For - Field and hunting setups - Outdoor audio projection - Wildlife calling systems - Remote speaker setups --- ## Straight Talking If your caller isn’t loud enough outdoors — this fixes it properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20U%20caller%20call%20fox%20bird%20extremely%20loud%20external%20speaker&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fu-caller-call-fox-bird-extremely-loud-external-speaker%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/u-caller-call-fox-bird-extremely-loud-external-speaker/?share=telegram) - **Product categories:** Hunting Accessories --- ### [DIN Radio Slot in dash Mount For MIDLAND 38 98 203 TTi 550 560 565 CB Radio](https://cbradio.co.uk/product/din-radio-slot-in-dash-mount-for-midland-38-98-203-tti-550-560-565-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Metal DIN Mount Kit for CB Radios** allows you to **install your CB radio neatly into a standard car DIN slot**, giving a **clean, factory-style finish**. Perfect for anyone wanting a **professional dashboard installation instead of a hanging bracket**. --- ## 🚗 Clean OEM-Style Installation ✔ Fits standard **DIN dashboard slots** ✔ Neat, flush-mounted radio setup ✔ Professional finish --- ## 💪 All-Metal Construction ✔ Strong steel casing ✔ Durable and rigid ✔ No flex like cheap plastic versions ✔ Built to last --- ## 📻 Wide Compatibility Fits popular models including: - Midland 38 / 98 / 203 / 210 - Team TS-6M - TTi 550 / 560 / 565 - CRT S-Mini - CRT Xenon - ONWA ✔ Designed for multiple compact CB radios --- ## 📏 Slot Dimensions ✔ **124 x 38 mm** ➡️ Ensure your radio matches before purchase --- ## 🔧 Easy Installation - Slide mount into DIN slot - Secure in place - Fit radio inside ✔ Straightforward install --- ## ⚠️ Important Notes ❗ **CB radio NOT included (mount only)** ❗ Internal speaker will be covered ➡️ External speaker recommended for best audio --- ## 📦 What You Get ✔ 1 x Metal DIN Mount Kit for CB Radios --- ## Key Features - DIN mount CB radio adapter - All-metal construction - Professional dashboard install - Multi-model compatibility - Strong and durable --- ## Why Choose This DIN Mount? ✔ Clean installation ✔ Stronger than plastic versions ✔ Fits multiple radios ✔ Easy to install --- ## Ideal For - Vehicle CB installs - Truck and van dashboards - Professional setups - Custom builds --- ## Straight Talking If you want your install to look **factory — not thrown together — this is the way to do it**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/din-radio-slot-in-dash-mount-for-midland-38-98-203-tti-550-560-565-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/din-radio-slot-in-dash-mount-for-midland-38-98-203-tti-550-560-565-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/din-radio-slot-in-dash-mount-for-midland-38-98-203-tti-550-560-565-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/din-radio-slot-in-dash-mount-for-midland-38-98-203-tti-550-560-565-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DIN%20Radio%20Slot%20in%20dash%20Mount%20For%20MIDLAND%2038%2098%20203%20TTi%20550%20560%20565%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdin-radio-slot-in-dash-mount-for-midland-38-98-203-tti-550-560-565-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/din-radio-slot-in-dash-mount-for-midland-38-98-203-tti-550-560-565-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/din-radio-slot-in-dash-mount-for-midland-38-98-203-tti-550-560-565-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/din-radio-slot-in-dash-mount-for-midland-38-98-203-tti-550-560-565-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [Toyota LandCruiser 4.2 TD HDJ80 Service Kit Oil Air and Diesel Filter set](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-hdj80-service-kit-oil-air-and-diesel-filter-set/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Land Cruiser 4.2 TD Service Kit** is a **complete filter kit** designed to keep your **Toyota Land Cruiser 4.2 TD VX** running **clean, efficient, and reliable**. Everything you need for a routine service — in one box. --- ## 📦 Complete Service Kit ✔ Air filter ✔ Oil filter ✔ Diesel (fuel) filter ✔ Covers essential maintenance items --- ## 🔧 Designed for 4.2 TD VX ✔ Direct fit for 4.2 diesel models ✔ Suitable for regular servicing ✔ No modifications required --- ## ⏱ Recommended Service Interval ✔ Every **6,000 miles** ✔ Helps maintain performance ✔ Reduces long-term wear --- ## ⚙️ Improve Engine Performance ✔ Cleaner air intake ✔ Better fuel filtration ✔ Proper oil circulation ✔ Smoother, more efficient running --- ## 💪 High Quality Components ✔ Aftermarket filters meeting or exceeding OE standards ✔ Reliable filtration performance ✔ Built for durability --- ## 💸 Great Value Kit ✔ Cheaper than buying filters separately ✔ Everything in one package ✔ Ideal for DIY servicing --- ## 🔧 Easy Installation ✔ Direct replacement parts ✔ Suitable for home mechanics or workshops ✔ Straightforward service job --- ## 📦 What You Get ✔ 1 x Air Filter ✔ 1 x Oil Filter ✔ 1 x Diesel Filter --- ## Key Features - Complete service kit - Air, oil & fuel filters included - 4.2 TD VX fitment - OE quality or better - Cost-effective maintenance --- ## Why Choose This Kit? ✔ Keeps engine in top condition ✔ Saves money on servicing ✔ Simple and convenient ✔ Reliable quality --- ## Ideal For - Land Cruiser owners - Routine servicing - Preventative maintenance - DIY mechanics --- ## Straight Talking Regular servicing is cheap — engine repairs aren’t. This keeps your Land Cruiser right. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-hdj80-service-kit-oil-air-and-diesel-filter-set/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-hdj80-service-kit-oil-air-and-diesel-filter-set/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-hdj80-service-kit-oil-air-and-diesel-filter-set/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-hdj80-service-kit-oil-air-and-diesel-filter-set/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20LandCruiser%204.2%20TD%20HDJ80%20Service%20Kit%20Oil%20Air%20and%20Diesel%20Filter%20set&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-4-2-td-hdj80-service-kit-oil-air-and-diesel-filter-set%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-hdj80-service-kit-oil-air-and-diesel-filter-set/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-hdj80-service-kit-oil-air-and-diesel-filter-set/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-hdj80-service-kit-oil-air-and-diesel-filter-set/?share=telegram) - **Product categories:** Land Cruiser --- ### [rg213 10m high quality mil spec low loss coax feeder with 2 x pl259 connectors](https://cbradio.co.uk/product/rg213-10m-high-quality-mil-spec-low-loss-coax-feeder-with-2-x-pl259-connectors/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG213 10m Coax Cable with PL259 Connectors** is a **high-quality mil-spec low loss feeder**, ideal for **short to medium runs where performance and durability matter**. Built to **MIL-C-17 standards**, this cable delivers **excellent shielding, low loss, and high power capability**. --- ## 📡 Low Loss Performance ✔ Minimal signal loss over distance ✔ Ideal for base station and mobile installs ✔ Performs well across HF, VHF & UHF --- ## ⚡ High Power Ready ✔ Suitable for **high power transmission** ✔ Ideal for CB, amateur radio, and commercial setups ✔ Reliable under load --- ## 💪 True Mil-Spec Construction ✔ Meets **MIL-C-17F / MIL-C-17G** standards ✔ **7 x 0.72mm copper core** ✔ **95–98% copper braid shielding** ✔ Thick outer diameter (**~9.65mm**) ✔ Built for serious use --- ## 🔌 Ready to Install ✔ **10 metre length** ✔ **2 x PL259 connectors included** ✔ One plug pre-soldered for convenience ➡️ Easy routing before fitting final connector --- ## 📶 Excellent Shielding ✔ High braid coverage reduces interference ✔ Clean, stable signal transmission ✔ Ideal for noisy environments --- ## 📻 Multi-Use Applications Perfect for: - CB radio - Amateur (ham) radio - Taxi / commercial antennas - High power installations --- ## ⚙️ Technical Specifications - **Length:** 10m - **Impedance:** 50 Ohm - **Core:** 7 x 0.72mm - **Braid:** 95–98% copper - **Outer Diameter:** ~9.65mm - **Loss (@100MHz):** ~0.7 dB per 10m - **Colour:** Black --- ## 🔧 Ideal for Short Runs ✔ Lower loss than RG58 ✔ Stronger and more durable ✔ Perfect for compact base setups --- ## Key Features - RG213 mil-spec coax - 10m length - Low loss design - 2 x PL259 connectors - High power capable --- ## Why Choose RG213? ✔ Better performance than RG58 ✔ Handles high power ✔ Strong and durable ✔ Professional-grade cable --- ## Ideal For - Base station installs - Amateur radio operators - High power CB setups - Permanent antenna runs --- ## Straight Talking If you want **top performance without going overkill on length**, this is the sweet spot. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg213-10m-high-quality-mil-spec-low-loss-coax-feeder-with-2-x-pl259-connectors/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg213-10m-high-quality-mil-spec-low-loss-coax-feeder-with-2-x-pl259-connectors/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg213-10m-high-quality-mil-spec-low-loss-coax-feeder-with-2-x-pl259-connectors/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg213-10m-high-quality-mil-spec-low-loss-coax-feeder-with-2-x-pl259-connectors/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg213%2010m%20high%20quality%20mil%20spec%20low%20loss%20coax%20feeder%20with%202%20x%20pl259%20connectors&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg213-10m-high-quality-mil-spec-low-loss-coax-feeder-with-2-x-pl259-connectors%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg213-10m-high-quality-mil-spec-low-loss-coax-feeder-with-2-x-pl259-connectors/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg213-10m-high-quality-mil-spec-low-loss-coax-feeder-with-2-x-pl259-connectors/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg213-10m-high-quality-mil-spec-low-loss-coax-feeder-with-2-x-pl259-connectors/?share=telegram) - **Product categories:** RG213 --- ### [rg213 25m high quality mil spec low loss with 2 x pl259 connectors](https://cbradio.co.uk/product/rg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG213 25m Coax Cable with PL259 Connectors** is a **mil-spec, low loss 50Ω coax**, built for **maximum performance, durability, and high-power applications**. Perfect for **longer cable runs** where signal loss needs to be kept to a minimum. --- ## 📡 Low Loss Performance ✔ Designed for **minimal signal loss over distance** ✔ Ideal for longer antenna runs ✔ Strong performance across HF, VHF & UHF --- ## ⚡ Built for High Power ✔ Suitable for **high power transmission setups** ✔ Ideal for base stations and amplifiers ✔ Reliable under load --- ## 💪 Heavy Duty Mil-Spec Construction ✔ **MIL-C-17-G specification** ✔ **7 x 0.72mm copper core** ✔ **95–98% copper braid shielding** ✔ Thick outer diameter (**~9.65mm**) ✔ Built for serious installations --- ## 🔌 Ready to Install ✔ **25 metre length** ✔ **2 x PL259 connectors included** ✔ One connector pre-soldered for convenience ➡️ Easy routing through walls before fitting final plug --- ## 📶 Excellent Shielding ✔ High braid coverage reduces interference ✔ Cleaner signal transmission ✔ Reliable in noisy environments --- ## 📻 Multi-Use Applications Perfect for: - CB radio - Amateur (ham) radio - Taxi / commercial antenna systems - High power installations --- ## ⚙️ Technical Specifications - **Length:** 25m - **Impedance:** 50 Ohm - **Core:** 7 x 0.72mm - **Braid:** 95–98% copper - **Outer Diameter:** ~9.65mm - **Loss (@100MHz):** ~0.7 dB per 10m - **Colour:** Black --- ## 🔧 Built for Long Runs ✔ Lower loss than RG58 ✔ Better suited for permanent installs ✔ Ideal for base station setups --- ## Key Features - RG213 mil-spec coax - 25m length - Low loss design - 2 x PL259 connectors - High power capable --- ## Why Choose RG213? ✔ Superior performance over distance ✔ Handles high power ✔ Strong and durable ✔ Professional-grade cable --- ## Ideal For - Base station setups - Amateur radio operators - High power CB users - Permanent antenna installations --- ## Straight Talking If you’re running a **long cable and want the best performance**, this is the one to use. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20rg213%2025m%20high%20quality%20mil%20spec%20low%20loss%20with%202%20x%20pl259%20connectors&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rg213-25m-high-quality-mil-spec-low-loss-with-2-x-pl259-connectors/?share=telegram) - **Product categories:** RG213 --- ### [pl259 to BNC male UHF Plug RF adaptor](https://cbradio.co.uk/product/pl259-to-bnc-male-uhf-plug-rf-adaptor-adapter-gold-tip/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PL259 to BNC Male RF Adaptor** lets you **connect PL259 (UHF) coax cables to BNC devices**, giving you **quick and easy compatibility between different radio systems**. --- ## 🔄 Convert PL259 to BNC ✔ **PL259 (UHF) → BNC Male** ✔ Connect standard CB coax to BNC inputs ✔ Simple plug-and-play solution --- ## 📡 Expand Your Setup ✔ Use PL259 coax cables with: - Handheld scanners - Test equipment - BNC-based radios ✔ More flexibility with your gear --- ## 💪 Quality Construction ✔ **Nickel plated brass body** ✔ Brass centre pin ✔ Durable and corrosion resistant ✔ Built to last --- ## 🔧 Easy to Use - Screw PL259 onto adaptor - Plug BNC into device - Ready to go ✔ No tools required --- ## 📶 Reliable Signal Transfer ✔ Maintains good signal quality ✔ Suitable for receive and transmit use ✔ Minimal signal loss --- ## 📦 What You Get ✔ 1 x PL259 to BNC Male RF Adaptor --- ## Key Features - PL259 to BNC male adaptor - Nickel plated brass construction - Compact and durable - Plug-and-play - Multi-use compatibility --- ## Why Choose This Adaptor? ✔ Simple and effective ✔ Strong reliable connection ✔ Expands compatibility ✔ Great value --- ## Ideal For - CB radio users - Scanner enthusiasts - Amateur radio operators - Test and bench setups --- ## Straight Talking Wrong connector? This fixes it in seconds. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pl259-to-bnc-male-uhf-plug-rf-adaptor-adapter-gold-tip/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pl259-to-bnc-male-uhf-plug-rf-adaptor-adapter-gold-tip/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pl259-to-bnc-male-uhf-plug-rf-adaptor-adapter-gold-tip/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pl259-to-bnc-male-uhf-plug-rf-adaptor-adapter-gold-tip/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20pl259%20to%20BNC%20male%20UHF%20Plug%20RF%20adaptor&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpl259-to-bnc-male-uhf-plug-rf-adaptor-adapter-gold-tip%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pl259-to-bnc-male-uhf-plug-rf-adaptor-adapter-gold-tip/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pl259-to-bnc-male-uhf-plug-rf-adaptor-adapter-gold-tip/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pl259-to-bnc-male-uhf-plug-rf-adaptor-adapter-gold-tip/?share=telegram) - **Product categories:** RF Adaptors --- ### [Mast Coupler 1.5” 38mm Steel Aerial Satellite Adaptor Pole Joiner 8 Bolt](https://cbradio.co.uk/product/mast-coupler-1-5-38mm-steel-aerial-satellite-adaptor-pole-joiner-8-bolt/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **1.5″ Mast Coupler 38mm Pole Joiner** is a **heavy-duty steel connector**, designed to **securely join two 38mm (1.5”) aerial or satellite masts**. Ideal for extending mast height for **better signal performance**. --- ## 🔩 Join Two Masts Securely ✔ Fits **38mm (1.5″) poles** ✔ Strong internal sleeve design ✔ Creates a rigid mast extension --- ## 💪 Heavy Duty Construction ✔ **2.5mm thick steel** ✔ High strength design ✔ Built for outdoor installations --- ## 🛡 Galvanised Finish ✔ Hot dip galvanised ✔ Corrosion resistant ✔ Long-lasting in all weather conditions --- ## 🔧 Multi-Bolt Clamping System ✔ **8 bolt design (4 per side)** ✔ Even clamping pressure ✔ Secure and stable connection --- ## 📏 Dimensions - **Fits:** 38mm (1.5″) mast - **Length:** approx **11.5 inches** - **Material thickness:** 2.5mm --- ## 📡 Ideal For - TV aerial installations - Satellite systems - CB & ham radio masts - Extending existing poles --- ## ⚠️ Installation Advice ✔ For taller setups, **guying the mast is recommended** ✔ Ensures stability and safety --- ## 🔧 Easy Installation - Insert both mast ends - Align correctly - Tighten bolts evenly ✔ Quick and solid setup --- ## Key Features - 38mm mast coupler - Heavy duty steel - Galvanised finish - 8 bolt clamp system - Outdoor rated --- ## Why Choose This Coupler? ✔ Strong and reliable ✔ Weather resistant ✔ Ideal for mast extensions ✔ Professional-grade build --- ## Ideal For - Installers and engineers - Amateur radio setups - Home aerial systems - Outdoor antenna builds --- ## Straight Talking If you’re extending a mast, don’t risk a weak join — this holds it properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mast-coupler-1-5-38mm-steel-aerial-satellite-adaptor-pole-joiner-8-bolt/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mast-coupler-1-5-38mm-steel-aerial-satellite-adaptor-pole-joiner-8-bolt/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mast-coupler-1-5-38mm-steel-aerial-satellite-adaptor-pole-joiner-8-bolt/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mast-coupler-1-5-38mm-steel-aerial-satellite-adaptor-pole-joiner-8-bolt/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mast%20Coupler%201.5%E2%80%9D%2038mm%20Steel%20Aerial%20Satellite%20Adaptor%20Pole%20Joiner%208%20Bolt&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmast-coupler-1-5-38mm-steel-aerial-satellite-adaptor-pole-joiner-8-bolt%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mast-coupler-1-5-38mm-steel-aerial-satellite-adaptor-pole-joiner-8-bolt/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mast-coupler-1-5-38mm-steel-aerial-satellite-adaptor-pole-joiner-8-bolt/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mast-coupler-1-5-38mm-steel-aerial-satellite-adaptor-pole-joiner-8-bolt/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [president ronald mobile ham / cb radio 10/12m or wideband 11m AM FM](https://cbradio.co.uk/product/president-ronald-mobile-ham-cb-radio-10-12m-or-wideband-11m-am-fm/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **President Ronald 10/12m Transceiver** is a **compact high-performance mobile radio**, delivering **serious power and advanced features** in a **smaller footprint**. Designed for **10m and 12m amateur use**, it offers **big radio performance at a sensible price**. --- ## ⚡ High Power Output ✔ **AM: 13W (50W PEP)** ✔ **FM: 35W** ✔ Strong transmit performance ✔ Ideal for long-range communication --- ## 📡 Multi-Band Capability ✔ Designed for **10m / 12m amateur bands** ✔ Wideband capable (where permitted) ❗ Can be modified for 11m use (NOT UK40 compliant) --- ## 🎛 Feature Packed - Rotary channel selector - Volume / On-Off - RF Power control - RF Gain / Mic Gain - Manual squelch + ASC - Dual Watch - Scan function ✔ All the controls you expect --- ## 📺 Advanced Display ✔ Multi-function LCD ✔ Frequency display ✔ S-meter (signal strength) ✔ SWR & power readout --- ## 🔊 Audio & Filters ✔ ANL / NB / HI-CUT filters ✔ Talkback function ✔ Public Address (PA) mode ✔ External speaker socket --- ## 🎤 Flexible Microphone Setup ✔ Front mic socket ✔ Supports electret or dynamic mics ✔ Easy access install --- ## ⚙️ Extra Features ✔ Roger Beep ✔ Key lock ✔ Time-Out Timer (TOT) ✔ Emergency channels (EMG 1/2) ✔ Beep function --- ## 📏 Compact Size - **125 x 175 x 45 mm** ✔ Smaller than many high-power radios ✔ Easy to install --- ## 📦 What You Get ✔ President Ronald 10/12m Transceiver ✔ Microphone ✔ Mounting bracket ✔ Power lead --- ## Key Features - 50W PEP output - AM/FM operation - Compact design - SWR & power meter built-in - Advanced filtering --- ## Why Choose the Ronald? ✔ High power in a small unit ✔ Feature-rich without being overpriced ✔ Trusted President quality ✔ Great upgrade from entry-level radios --- ## Ideal For - Amateur radio operators - Long-range mobile setups - Experienced CB users (where legal) - High-performance installs --- ## ⚠️ Important Notes ❗ Designed for **amateur radio use** ❗ 11m modification may not be legal depending on country ❗ Not UK40 CB compliant --- ## Straight Talking If you want **serious power without a massive radio**, this punches well above its size. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-ronald-mobile-ham-cb-radio-10-12m-or-wideband-11m-am-fm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-ronald-mobile-ham-cb-radio-10-12m-or-wideband-11m-am-fm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-ronald-mobile-ham-cb-radio-10-12m-or-wideband-11m-am-fm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-ronald-mobile-ham-cb-radio-10-12m-or-wideband-11m-am-fm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20president%20ronald%20mobile%20ham%20%2F%20cb%20radio%2010%2F12m%20or%20wideband%2011m%20AM%20FM&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-ronald-mobile-ham-cb-radio-10-12m-or-wideband-11m-am-fm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-ronald-mobile-ham-cb-radio-10-12m-or-wideband-11m-am-fm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-ronald-mobile-ham-cb-radio-10-12m-or-wideband-11m-am-fm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-ronald-mobile-ham-cb-radio-10-12m-or-wideband-11m-am-fm/?share=telegram) - **Product categories:** President --- ### [Aerial Bracket Weld on tab for DV CB VHF UHF Antenna 2mm plain untreated steel](https://cbradio.co.uk/product/aerial-bracket-weld-on-tab-for-dv-cb-vhf-uhf-antenna-2mm-plain-untreated-steel/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Weld-On Aerial Bracket Tab (2mm Steel)** is a **heavy-duty fabrication bracket**, designed for **custom antenna installs** on **roll cages, bull bars, and roof racks**. Perfect for those who want a **clean, solid mount without drilling into body panels**. --- ## 🔩 Designed for DV Mount Systems ✔ Compatible with **DV-style antenna mounts** ✔ Ideal for CB, VHF & UHF aerials ✔ Designed to pair with dome mount + cable kits --- ## 🔧 Weld-On Installation ✔ Easily welds to: - Roll cages - Bull bars - Roof racks - Custom frameworks ✔ Strong, permanent fixing --- ## 🚙 Ideal for Off-Road Builds ✔ Perfect for: - 4×4 vehicles - Soft top vehicles - Custom builds - Overland setups ✔ No need to drill bodywork --- ## 💪 Heavy Duty Steel Construction ✔ **2mm thick steel** ✔ Strong and durable ✔ Built for rugged use --- ## 🛠 Raw Steel Finish ✔ Plain untreated steel ✔ Ready for: - Welding - Painting - Powder coating ✔ Finish it your way --- ## 📡 Clean & Professional Install ✔ Neat mounting solution ✔ Better positioning options ✔ Strong ground when properly installed --- ## ⚠️ Important Note ❗ **Dome mount and cable NOT included** ❗ Bracket only --- ## 📦 What You Get ✔ 1 x weld-on aerial bracket tab (2mm steel) --- ## Key Features - Weld-on antenna bracket - 2mm steel construction - DV mount compatible - Ideal for custom installs - Untreated raw steel --- ## Why Choose This Bracket? ✔ No drilling required ✔ Stronger than bolt-on options ✔ Perfect for fabrication work ✔ Clean professional finish --- ## Ideal For - Off-road enthusiasts - Fabricators and builders - Land Rover / 4×4 owners - Custom antenna installs --- ## Straight Talking If you’re building it properly, this is the **right way to mount your aerial**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/aerial-bracket-weld-on-tab-for-dv-cb-vhf-uhf-antenna-2mm-plain-untreated-steel/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/aerial-bracket-weld-on-tab-for-dv-cb-vhf-uhf-antenna-2mm-plain-untreated-steel/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/aerial-bracket-weld-on-tab-for-dv-cb-vhf-uhf-antenna-2mm-plain-untreated-steel/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/aerial-bracket-weld-on-tab-for-dv-cb-vhf-uhf-antenna-2mm-plain-untreated-steel/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Aerial%20Bracket%20Weld%20on%20tab%20for%20DV%20CB%20VHF%20UHF%20Antenna%202mm%20plain%20untreated%20steel&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Faerial-bracket-weld-on-tab-for-dv-cb-vhf-uhf-antenna-2mm-plain-untreated-steel%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/aerial-bracket-weld-on-tab-for-dv-cb-vhf-uhf-antenna-2mm-plain-untreated-steel/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/aerial-bracket-weld-on-tab-for-dv-cb-vhf-uhf-antenna-2mm-plain-untreated-steel/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/aerial-bracket-weld-on-tab-for-dv-cb-vhf-uhf-antenna-2mm-plain-untreated-steel/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [Inrico T320 4G WIFI network radio worldwide coverage license free zello echolink](https://cbradio.co.uk/product/inrico-t320-4g-wifi-network-radio-worldwide-coverage-license-free-zello-echolink/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Inrico T-320 Network Radio** is a **push-to-talk (PTT) handheld that uses 4G/3G or WiFi instead of traditional radio frequencies**, giving you **instant communication anywhere with network coverage**. Think **walkie-talkie simplicity with global reach**. --- ## 🌍 Worldwide Coverage ✔ Works anywhere with **mobile data or WiFi** ✔ Handheld-to-handheld or handheld-to-mobile ✔ No range limits like traditional radios ➡️ Your “repeater” is the cellular network --- ## 📡 How It Works ✔ Uses apps like: - Zello - TeamSpeak ✔ Push-to-talk communication over internet ✔ Private calls or group channels --- ## ⚠️ Important ❗ **Not a traditional RF radio** ❗ **Does NOT transmit on amateur bands** ✔ Uses **SIM card or WiFi only** --- ## 📱 Android Powered Flexibility ✔ Fully unlocked Android system ✔ Install apps to suit your needs ✔ Simple or advanced setup --- ## 🔊 Strong Audio Performance ✔ Dual chamber speaker ✔ Clear, loud communication ✔ Built for real-world use --- ## 📍 Built-In GPS ✔ Track users ✔ Location-based communication ✔ Ideal for teams and fleets --- ## 🔋 Long Battery Life ✔ Up to **80+ hours standby** ✔ Reliable for extended use --- ## 💧 Rugged Design ✔ **IP54 rated** ✔ Splash resistant ✔ Built for work environments --- ## 📺 Display & Media ✔ **2.4” colour screen** ✔ Supports MP3 & MP4 ✔ Expandable storage (up to 32GB) --- ## 📦 What You Get ✔ Inrico T-320 Network Radio ✔ Pre-installed latest firmware ✔ Zello pre-installed ✔ Charging/data cable ✔ Ready to go out of the box --- ## 🔧 SIM & Network Options ✔ Use any compatible SIM ✔ UK options like iD Mobile / FreedomPop ✔ Or operate entirely via WiFi --- ## 🚚 Pre-Configured for You ✔ Updated to latest firmware before dispatch ✔ Zello installed for convenience ✔ Plug in SIM and go --- ## Key Features - Push-to-talk over cellular - Android operating system - GPS built-in - WiFi + SIM operation - Global communication --- ## Why Choose the T-320? ✔ Unlimited range (network dependent) ✔ No licence required ✔ Professional look and feel ✔ Flexible and powerful --- ## Ideal For - Business and fleet communication - Security teams - Events and coordination - Anyone needing long-range comms --- ## Straight Talking If you want **walkie-talkie simplicity without range limits**, this is a game changer. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/inrico-t320-4g-wifi-network-radio-worldwide-coverage-license-free-zello-echolink/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/inrico-t320-4g-wifi-network-radio-worldwide-coverage-license-free-zello-echolink/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/inrico-t320-4g-wifi-network-radio-worldwide-coverage-license-free-zello-echolink/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/inrico-t320-4g-wifi-network-radio-worldwide-coverage-license-free-zello-echolink/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Inrico%20T320%204G%20WIFI%20network%20radio%20worldwide%20coverage%20license%20free%20zello%20echolink&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Finrico-t320-4g-wifi-network-radio-worldwide-coverage-license-free-zello-echolink%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/inrico-t320-4g-wifi-network-radio-worldwide-coverage-license-free-zello-echolink/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/inrico-t320-4g-wifi-network-radio-worldwide-coverage-license-free-zello-echolink/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/inrico-t320-4g-wifi-network-radio-worldwide-coverage-license-free-zello-echolink/?share=telegram) - **Product categories:** Network radio --- ### [2 x 4mm Thumb Screws Rig side bolts for Taxi / CB radio 1 PAIR](https://cbradio.co.uk/product/2-x-4mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **CB Radio Thumb Screws 4mm (Pair)** are **replacement side bolts** used to **secure your CB or taxi radio into its mounting bracket**. A simple but essential part to keep your radio **firmly mounted and easy to adjust**. --- ## 🔩 Secure Your Radio Properly ✔ Holds radio firmly in bracket ✔ Prevents movement while driving ✔ Keeps installation neat and safe --- ## ✋ Easy Hand Tightening ✔ Large plastic thumb heads ✔ No tools required ✔ Quick adjustment of radio angle --- ## 📦 Supplied as a Pair ✔ **2 x thumb screws included** ✔ One for each side of the bracket --- ## 📏 4mm Thread Size ✔ Standard **4mm fitment** ✔ Common on many CB and taxi radios ➡️ Also available in **4mm and 5mm sizes** --- ## 💪 Durable Design ✔ Strong threaded bolts ✔ Tough plastic heads ✔ Built for regular use --- ## 🚗 Ideal For - CB radios - Taxi radios - Mobile radio installs - Replacement or upgrade --- ## 🔧 Quick Fix Solution Perfect if: - Screws are missing - Threads are worn - You want easier adjustment --- ## Key Features - 4mm thumb screws - Supplied as a pair - Tool-free adjustment - Durable plastic heads - Standard radio bracket fit --- ## Why Choose These? ✔ Simple and effective ✔ Fits most setups ✔ Easy to install ✔ Great value --- ## Straight Talking Lost your bracket screws? These get you sorted in seconds. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-x-4mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-x-4mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-x-4mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-x-4mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%20x%204mm%20Thumb%20Screws%20Rig%20side%20bolts%20for%20Taxi%20%2F%20CB%20radio%201%20PAIR&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-x-4mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-x-4mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-x-4mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-x-4mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=telegram) - **Product categories:** CB radio Accessories --- ### [2 x 5mm Thumb Screws Rig side bolts for Taxi / CB radio 1 PAIR](https://cbradio.co.uk/product/2-x-5mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **CB Radio Thumb Screws 5mm (Pair)** are **replacement side bolts** used to **secure your CB or taxi radio into its mounting bracket**. A simple but essential part to keep your radio **firmly mounted and easy to adjust**. --- ## 🔩 Secure Your Radio Properly ✔ Holds radio firmly in bracket ✔ Prevents movement while driving ✔ Keeps installation neat and safe --- ## ✋ Easy Hand Tightening ✔ Large plastic thumb heads ✔ No tools required ✔ Quick adjustment of radio angle --- ## 📦 Supplied as a Pair ✔ **2 x thumb screws included** ✔ One for each side of the bracket --- ## 📏 5mm Thread Size ✔ Standard **5mm fitment** ✔ Common on many CB and taxi radios ➡️ Also available in **4mm and 5mm sizes** --- ## 💪 Durable Design ✔ Strong threaded bolts ✔ Tough plastic heads ✔ Built for regular use --- ## 🚗 Ideal For - CB radios - Taxi radios - Mobile radio installs - Replacement or upgrade --- ## 🔧 Quick Fix Solution Perfect if: - Screws are missing - Threads are worn - You want easier adjustment --- ## Key Features - 5mm thumb screws - Supplied as a pair - Tool-free adjustment - Durable plastic heads - Standard radio bracket fit --- ## Why Choose These? ✔ Simple and effective ✔ Fits most setups ✔ Easy to install ✔ Great value --- ## Straight Talking Lost your bracket screws? These get you sorted in seconds. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-x-5mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-x-5mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-x-5mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-x-5mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%20x%205mm%20Thumb%20Screws%20Rig%20side%20bolts%20for%20Taxi%20%2F%20CB%20radio%201%20PAIR&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-x-5mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-x-5mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-x-5mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-x-5mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=telegram) - **Product categories:** CB radio Accessories --- ### [2 x 6mm Thumb Screws Rig side bolts for Taxi / CB radio 1 PAIR](https://cbradio.co.uk/product/2-x-6mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **CB Radio Thumb Screws 6mm (Pair)** are **replacement side bolts** used to **secure your CB or taxi radio into its mounting bracket**. A simple but essential part to keep your radio **firmly mounted and easy to adjust**. --- ## 🔩 Secure Your Radio Properly ✔ Holds radio firmly in bracket ✔ Prevents movement while driving ✔ Keeps installation neat and safe --- ## ✋ Easy Hand Tightening ✔ Large plastic thumb heads ✔ No tools required ✔ Quick adjustment of radio angle --- ## 📦 Supplied as a Pair ✔ **2 x thumb screws included** ✔ One for each side of the bracket --- ## 📏 6mm Thread Size ✔ Standard **6mm fitment** ✔ Common on many CB and taxi radios ➡️ Also available in **4mm and 5mm sizes** --- ## 💪 Durable Design ✔ Strong threaded bolts ✔ Tough plastic heads ✔ Built for regular use --- ## 🚗 Ideal For - CB radios - Taxi radios - Mobile radio installs - Replacement or upgrade --- ## 🔧 Quick Fix Solution Perfect if: - Screws are missing - Threads are worn - You want easier adjustment --- ## Key Features - 6mm thumb screws - Supplied as a pair - Tool-free adjustment - Durable plastic heads - Standard radio bracket fit --- ## Why Choose These? ✔ Simple and effective ✔ Fits most setups ✔ Easy to install ✔ Great value --- ## Straight Talking Lost your bracket screws? These get you sorted in seconds. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-x-6mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-x-6mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-x-6mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-x-6mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%20x%206mm%20Thumb%20Screws%20Rig%20side%20bolts%20for%20Taxi%20%2F%20CB%20radio%201%20PAIR&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-x-6mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-x-6mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-x-6mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-x-6mm-thumb-screws-rig-side-bolts-for-taxi-cb-radio-1-pair/?share=telegram) - **Product categories:** CB radio Accessories --- ### [bnc female to sma male adaptor for yaesu kenwood or Icom hand held](https://cbradio.co.uk/product/bnc-female-to-sma-male-adaptor-for-yaesu-kenwood-or-icom-hand-held/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **BNC Female to SMA Male Adaptor** allows you to **connect BNC antennas or coax to SMA handheld radios**, giving you **maximum flexibility with your setup**. --- ## 🔄 Convert BNC to SMA ✔ **BNC Female → SMA Male** ✔ Use BNC antennas on SMA radios ✔ Simple plug-and-play solution --- ## 📡 Expand Your Options ✔ Connect: - External antennas - Base station aerials - Test equipment ✔ More flexibility from your handheld --- ## 🔩 Wide Compatibility Suitable for handheld radios from: - Yaesu - Kenwood - Icom ✔ Works with most SMA-based handhelds --- ## 💪 Solid Build Quality ✔ Durable metal construction ✔ Secure connection ✔ Reliable signal transfer --- ## 🔧 Easy to Use - Screw onto radio (SMA) - Connect BNC antenna or cable - Ready to go ✔ No tools required --- ## 📶 Minimal Signal Loss ✔ Maintains signal quality ✔ Suitable for receive and transmit use --- ## 🚚 Fast UK Dispatch ✔ Sent from **Norfolk, UK** ✔ No long overseas delays --- ## Key Features - BNC female to SMA male - Handheld radio adaptor - Durable metal construction - Plug-and-play - Wide compatibility --- ## Why Choose This Adaptor? ✔ Simple and effective ✔ Expands antenna options ✔ Strong and reliable ✔ Fast UK delivery --- ## Ideal For - Amateur radio users - Scanner enthusiasts - Field testing setups - Upgrading handheld antennas --- ## Straight Talking If you’ve got the wrong connector, this fixes it instantly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/bnc-female-to-sma-male-adaptor-for-yaesu-kenwood-or-icom-hand-held/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/bnc-female-to-sma-male-adaptor-for-yaesu-kenwood-or-icom-hand-held/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/bnc-female-to-sma-male-adaptor-for-yaesu-kenwood-or-icom-hand-held/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/bnc-female-to-sma-male-adaptor-for-yaesu-kenwood-or-icom-hand-held/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20bnc%20female%20to%20sma%20male%20adaptor%20for%20yaesu%20kenwood%20or%20Icom%20hand%20held&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fbnc-female-to-sma-male-adaptor-for-yaesu-kenwood-or-icom-hand-held%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/bnc-female-to-sma-male-adaptor-for-yaesu-kenwood-or-icom-hand-held/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/bnc-female-to-sma-male-adaptor-for-yaesu-kenwood-or-icom-hand-held/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/bnc-female-to-sma-male-adaptor-for-yaesu-kenwood-or-icom-hand-held/?share=telegram) - **Product categories:** RF Adaptors --- ### [CRT s-mini v3 AM FM mobile cb radio UK / EU 80 channel](https://cbradio.co.uk/product/crt-s-mini-v3-am-fm-mobile-cb-radio-uk-eu-80-channel/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **CRT S-MINI V3 CB Radio** is a **compact, no-frills mobile CB**, designed for **simple, reliable two-way communication**. Perfect for beginners or anyone wanting a **straightforward CB setup without unnecessary extras**. --- ## 📻 Simple & Easy to Use ✔ Clean, uncluttered controls ✔ No complicated menus ✔ Ideal for first-time users --- ## 🌍 UK & EU Multi-Standard ✔ **40 UK channels + 40 EU channels (80 total)** ✔ Multi-norm operation for European travel ✔ AM/FM modes supported --- ## 📡 Reliable CB Performance ✔ Frequency coverage: - **26.965 – 27.405 MHz (CEPT)** - **27.60125 – 27.99125 MHz (UK)** ✔ Stable communication across bands --- ## 🔊 Essential Features Only - AM/FM selector - Manual squelch - Volume control - Channel up/down - RX/TX LED indicator - Direct access to Channel 9 & 19 ✔ Everything you need — nothing you don’t --- ## 🎤 Front Microphone Socket ✔ 4-pin mic socket on front panel ✔ Easy access installation ✔ Cleaner dash setup --- ## 🔧 Compact Mobile Design ✔ Size: **150 x 140 x 41 mm** ✔ Fits easily in most vehicles ✔ Includes mounting bracket --- ## 🔌 Power & Audio ✔ 12V power lead included ✔ Internal speaker ✔ External speaker socket --- ## ⚡ Output Power ✔ **4 Watts (legal UK output)** ✔ AM/FM operation --- ## 📦 What’s Included ✔ CRT S-MINI V3 CB Radio ✔ Microphone ✔ Mounting bracket ✔ Power lead --- ## Key Features - 80 channel CB radio (UK + EU) - AM/FM operation - Compact design - Front mic socket - Easy to use controls --- ## Why Choose the S-MINI V3? ✔ Perfect for beginners ✔ Compact and discreet ✔ Reliable everyday use ✔ Great value --- ## Ideal For - First-time CB users - Truck and van drivers - 4×4 and off-road use - Simple communication setups --- ## Straight Talking If you want a **basic CB that just works without fuss**, this is spot on. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/crt-s-mini-v3-am-fm-mobile-cb-radio-uk-eu-80-channel/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/crt-s-mini-v3-am-fm-mobile-cb-radio-uk-eu-80-channel/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/crt-s-mini-v3-am-fm-mobile-cb-radio-uk-eu-80-channel/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/crt-s-mini-v3-am-fm-mobile-cb-radio-uk-eu-80-channel/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CRT%20s-mini%20v3%20AM%20FM%20mobile%20cb%20radio%20UK%20%2F%20EU%2080%20channel&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcrt-s-mini-v3-am-fm-mobile-cb-radio-uk-eu-80-channel%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/crt-s-mini-v3-am-fm-mobile-cb-radio-uk-eu-80-channel/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/crt-s-mini-v3-am-fm-mobile-cb-radio-uk-eu-80-channel/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/crt-s-mini-v3-am-fm-mobile-cb-radio-uk-eu-80-channel/?share=telegram) - **Product categories:** CRT --- ### [Drive half shaft seal for Toyota Landcruiser HDJ80 4.2TD 1990-1998](https://cbradio.co.uk/product/drive-half-shaft-seal-for-toyota-landcruiser-hdj80-4-2td-1990-1998/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Land Cruiser HDJ80 Half Shaft Seal** is a **high-quality replacement seal**, designed for the **Toyota Land Cruiser HDJ80**. If your axle is **leaking oil or throwing grease**, this is the part that puts it right. --- ## 🔧 Direct Replacement Fit ✔ Designed for **HDJ80 4.2TD (1990–1998)** ✔ Fits half shaft / drive shaft location ✔ Straightforward replacement --- ## 💪 OEM-Quality Materials ✔ Japanese aftermarket seal ✔ Built to **OEM standards or better** ✔ Durable and long-lasting --- ## 🛢 Fix Common Leaks ✔ Stops oil leaks from axle housing ✔ Prevents grease loss from CV joint ✔ Protects bearings and components --- ## 🚙 Essential Maintenance Part If you notice: - Oil around the hub - Grease being thrown out - Mess on wheels or axle ➡️ It’s time to replace your seal --- ## ⚙️ Protect Your Drivetrain ✔ Prevents contamination ✔ Reduces wear ✔ Extends component life --- ## 🔧 Easy to Fit (With Correct Tools) ✔ Direct replacement ✔ No modifications required ✔ Ideal for DIY or workshop install --- ## 📦 What You Get ✔ **1 x half shaft / drive shaft seal** ➡️ Replace as needed per side --- ## Key Features - HDJ80 fitment - High-quality aftermarket seal - OEM-level performance - Prevents leaks - Durable construction --- ## Why Choose This Seal? ✔ Reliable fix for leaks ✔ Quality materials ✔ Cost-effective repair ✔ Keeps your axle healthy --- ## Ideal For - Land Cruiser 80 Series owners - 4.2 diesel models - Off-road vehicles - Maintenance and repairs --- ## Straight Talking If your axle is leaking, ignoring it will cost you more — this is the cheap fix. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/drive-half-shaft-seal-for-toyota-landcruiser-hdj80-4-2td-1990-1998/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/drive-half-shaft-seal-for-toyota-landcruiser-hdj80-4-2td-1990-1998/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/drive-half-shaft-seal-for-toyota-landcruiser-hdj80-4-2td-1990-1998/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/drive-half-shaft-seal-for-toyota-landcruiser-hdj80-4-2td-1990-1998/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Drive%20half%20shaft%20seal%20for%20Toyota%20Landcruiser%20HDJ80%204.2TD%20%201990-1998&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdrive-half-shaft-seal-for-toyota-landcruiser-hdj80-4-2td-1990-1998%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/drive-half-shaft-seal-for-toyota-landcruiser-hdj80-4-2td-1990-1998/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/drive-half-shaft-seal-for-toyota-landcruiser-hdj80-4-2td-1990-1998/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/drive-half-shaft-seal-for-toyota-landcruiser-hdj80-4-2td-1990-1998/?share=telegram) - **Product categories:** Land Cruiser --- ### [Toyota LandCruiser Amazon 100 4.2 TD Filter Service Kit Oil Air and Diesel](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-4-2-td-filter-service-kit-oil-air-and-diesel/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Land Cruiser 4.2 TD Service Kit** is a **complete maintenance package** for the **Toyota Land Cruiser Amazon 100 Series**, helping keep your engine running **smooth, clean, and reliable**. --- ## 📦 Complete Service Kit ✔ Air filter ✔ Oil filter ✔ Diesel (fuel) filter ✔ Everything needed for a routine service --- ## 🚙 Designed for 4.2 TD VX ✔ Direct fit for **4.2 diesel engine models** ✔ Suitable for regular servicing ✔ Helps maintain engine performance --- ## 🔧 Essential Maintenance ✔ Recommended service interval: **every 6,000 miles** ✔ Keeps engine clean and efficient ✔ Reduces wear and tear --- ## ⚙️ Improve Engine Performance ✔ Better airflow ✔ Cleaner fuel delivery ✔ Proper oil filtration ✔ Smoother running engine --- ## 💪 High Quality Filters ✔ Aftermarket parts meeting or exceeding OE standards ✔ Reliable filtration ✔ Built for durability --- ## 💸 Great Value Kit ✔ Cheaper than buying separately ✔ Everything in one package ✔ Ideal for DIY servicing --- ## 🔧 Easy Installation ✔ Direct replacement parts ✔ No modifications required ✔ Suitable for home servicing --- ## Key Features - Complete service kit - Air, oil & fuel filters included - Land Cruiser 4.2 TD fitment - OE quality or better - Cost-effective maintenance solution --- ## Why Choose This Kit? ✔ Keeps your engine healthy ✔ Saves money on servicing ✔ Simple and convenient ✔ Designed for your vehicle --- ## Ideal For - Land Cruiser 4.2 TD owners - Routine servicing - DIY mechanics - Preventative maintenance --- ## Straight Talking If your service is due, this is a **no-brainer — cheap insurance for a strong engine**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-4-2-td-filter-service-kit-oil-air-and-diesel/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-4-2-td-filter-service-kit-oil-air-and-diesel/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-4-2-td-filter-service-kit-oil-air-and-diesel/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-4-2-td-filter-service-kit-oil-air-and-diesel/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20LandCruiser%20Amazon%20100%204.2%20TD%20Filter%20Service%20Kit%20Oil%20Air%20and%20Diesel&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-amazon-100-4-2-td-filter-service-kit-oil-air-and-diesel%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-4-2-td-filter-service-kit-oil-air-and-diesel/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-4-2-td-filter-service-kit-oil-air-and-diesel/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-amazon-100-4-2-td-filter-service-kit-oil-air-and-diesel/?share=telegram) - **Product categories:** Land Cruiser --- ### [Moonraker CS201 2-Way Aerial Antenna Coax Switch](https://cbradio.co.uk/product/moonraker-cs201-2-way-aerial-antenna-coax-switch/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **2 Way Coaxial A/B Switch (SO239)** is a **professional all-metal antenna switch**, allowing you to **quickly switch between two radios or two antennas** using a simple rotary control. --- ## 🔄 Flexible Switching Options ✔ **2 radios → 1 antenna** ✔ **1 radio → 2 antennas** ✔ Works in either direction ✔ Simple and effective setup --- ## 🎚 True A/B Operation ✔ Rotary selector switch ✔ **No middle position** (A or B only) ✔ Positive, reliable switching --- ## 🔌 Standard SO239 Connections ✔ 3 x SO239 sockets ✔ Compatible with PL259 coax leads ✔ Easy integration into existing setups --- ## ⚡ High Power Handling ✔ Rated up to **1kW (CW)** ✔ Suitable for high-power stations ✔ Reliable under load --- ## 📡 Wide Frequency Coverage ✔ Works up to **600 MHz** ✔ Suitable for: - CB radio - Amateur radio (HF / VHF / UHF) - Scanner setups --- ## 📉 Low Signal Loss ✔ Less than **0.2 dB insertion loss** ✔ Maintains signal strength ✔ Efficient switching --- ## 🔒 Grounds Unused Port ✔ Unused position is grounded ✔ Reduces interference and noise ✔ Protects equipment --- ## 💪 All-Metal Professional Build ✔ Durable metal enclosure ✔ Robust rotary switch ✔ Built for long-term use --- ## 🔧 Easy to Use - Connect radios/antennas - Turn selector knob - Instantly switch ✔ No unplugging required --- ## Key Features - 2-way A/B coax switch - SO239 connectors - 1kW power rating - Up to 600 MHz - Low loss design --- ## Why Choose This Switch? ✔ Simple and reliable ✔ Handles high power ✔ Protects unused ports ✔ Professional build quality --- ## Ideal For - Base station setups - Multiple antenna systems - Dual radio installations - Amateur and CB users --- ## Straight Talking If you’re swapping antennas or radios regularly, this saves time — and wear on your connectors. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/moonraker-cs201-2-way-aerial-antenna-coax-switch/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/moonraker-cs201-2-way-aerial-antenna-coax-switch/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/moonraker-cs201-2-way-aerial-antenna-coax-switch/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/moonraker-cs201-2-way-aerial-antenna-coax-switch/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Moonraker%20CS201%202-Way%20Aerial%20Antenna%20Coax%20Switch&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmoonraker-cs201-2-way-aerial-antenna-coax-switch%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/moonraker-cs201-2-way-aerial-antenna-coax-switch/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/moonraker-cs201-2-way-aerial-antenna-coax-switch/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/moonraker-cs201-2-way-aerial-antenna-coax-switch/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [Quick Release for 3/8 CB Radio aerial or Ham Radio Antenna](https://cbradio.co.uk/product/quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Tall 3/8 Quick Release Aerial Disconnect** is a **heavy-duty quick disconnect**, designed to let you **remove your antenna quickly and securely** — with an **extended locking slot for improved grip and stability**. Perfect for anyone running **taller or heavier 3/8 threaded CB or ham radio aerials**. --- ## ⚡ Fast & Easy Removal ✔ Remove your aerial in seconds ✔ No tools required ✔ Quick twist-and-release design ✔ Ideal for daily use --- ## 🔩 Standard 3/8″ Fitment ✔ Fits all **3/8 threaded antennas and mounts** ✔ Compatible with CB and amateur radio setups --- ## 🔒 Extended Slot Design (Tall Version) ✔ Longer bayonet slot ✔ Improved locking engagement ✔ Less chance of loosening under vibration ✔ Better for larger antennas --- ## 💪 Heavy Duty Build ✔ Strong and durable construction ✔ Designed for mobile environments ✔ Handles rough use and vibration --- ## 🚗 Real-World Practical Use Perfect for: - **Multi-storey car parks** - **Low bridges** - **Off-road green lanes** - **HGV and tall vehicle setups** ✔ Prevents antenna damage --- ## 📡 Ideal for Larger Aerials ✔ Works especially well with: - Full-size springers - Long whip antennas - Heavy-duty CB aerials --- ## 🔧 Simple Operation - Twist to unlock - Remove aerial - Refit in seconds ✔ No hassle --- ## 🛡 Protect Your Equipment ✔ Prevents bending or snapping ✔ Extends aerial life ✔ Saves money long-term --- ## Key Features - Tall quick release design - 3/8″ thread fitting - Extended locking slot - Heavy duty construction - Tool-free operation --- ## Why Choose This Version? ✔ Stronger locking than short version ✔ Better for heavy/tall antennas ✔ More secure under vibration ✔ Built for serious use --- ## Ideal For - Truck drivers - 4×4 and off-road users - Delivery vehicles - Anyone running tall aerials --- ## Straight Talking If you’re running a **big aerial, this is the version you want** — more secure, less hassle. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Quick%20Release%20for%203%2F8%20CB%20Radio%20aerial%20or%20Ham%20Radio%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fquick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/quick-release-for-3-8-cb-radio-aerial-or-ham-radio-antenna/?share=telegram) - **Product categories:** CB radio Accessories --- ### [Red Devil super Modulator long base coil CB radio antenna XL 1.78m aerial](https://cbradio.co.uk/product/red-devil-super-modulator-long-base-coil-cb-radio-antenna-xl-1-78m-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Red Devil Super Modulator CB Antenna** is an **extra-long, high-performance bull whip aerial**, designed for **maximum range and strong signal output**. With its **long base coil design and 1.78m height**, this antenna delivers **excellent wideband performance across the full CB range**. --- ## 📡 Extended Range Performance ✔ Designed for **26–28 MHz CB band** ✔ Wideband coverage across all 80 channels ✔ Typical range: **10+ miles** (conditions dependent) --- ## 📏 Extra Long Bull Whip Design ✔ Length: **1.78m (approx 6ft)** ✔ Improved transmit and receive performance ✔ Ideal for long-distance communication --- ## 🔥 High Efficiency Base Coil - **460mm coil length** - Optimised for wideband performance - Strong signal radiation ✔ Built for performance --- ## 💪 Durable Construction ✔ **17/7 PH stainless steel whip** ✔ Flexible and resilient ✔ Handles wind and vibration --- ## ⚡ Power Handling ✔ Rated up to **500 Watts** ✔ Suitable for standard and enhanced setups --- ## 🔩 Standard 3/8″ Fitting ✔ Fits most CB mounts ✔ Compatible with mirror, gutter, body and mag mounts --- ## 🚛 Ideal for Vehicles Perfect for: - Trucks and lorries - 4×4 and off-road vehicles - Vans and work vehicles ✔ Built for real-world use --- ## ⚙️ Technical Specifications - **Frequency:** 26–28 MHz - **Length:** 1.78m - **Power:** 500W - **SWR:** ≤ 1.5:1 - **Impedance:** 50 Ohm - **Fitting:** 3/8 UNF - **Coil Length:** 460mm --- ## Key Features - XL bull whip CB antenna - Long base coil design - Wideband performance - Stainless steel whip - 3/8″ mounting --- ## Why Choose the Red Devil? ✔ Strong long-range performance ✔ Wide frequency coverage ✔ Tough and flexible build ✔ Distinctive look --- ## Ideal For - Truck drivers - Long-distance CB users - Off-road enthusiasts - High-performance setups --- ## Straight Talking If you want **more height, more reach, and more presence**, this antenna delivers. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/red-devil-super-modulator-long-base-coil-cb-radio-antenna-xl-1-78m-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/red-devil-super-modulator-long-base-coil-cb-radio-antenna-xl-1-78m-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/red-devil-super-modulator-long-base-coil-cb-radio-antenna-xl-1-78m-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/red-devil-super-modulator-long-base-coil-cb-radio-antenna-xl-1-78m-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Red%20Devil%20super%20Modulator%20long%20base%20coil%20CB%20radio%20antenna%20XL%201.78m%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fred-devil-super-modulator-long-base-coil-cb-radio-antenna-xl-1-78m-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/red-devil-super-modulator-long-base-coil-cb-radio-antenna-xl-1-78m-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/red-devil-super-modulator-long-base-coil-cb-radio-antenna-xl-1-78m-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/red-devil-super-modulator-long-base-coil-cb-radio-antenna-xl-1-78m-aerial/?share=telegram) - **Product categories:** Modulators --- ### [Mini Springer CB aerial & Rear Aerial mount 7M cable Land Rover Defender 110](https://cbradio.co.uk/product/mini-springer-cb-aerial-rear-aerial-mount-7m-cable-land-rover-defender-110/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PSM-1 Defender CB Mount Kit with Mini Stinger** is a **complete rear-mount CB solution**, designed specifically for the **Land Rover Defender**. This is the **classic setup seen on most Defenders**, combining a **sturdy rear mount with a tough mini stinger aerial**. --- ## 📦 Complete Kit – Ready to Install ✔ PSM-1 rear body mount ✔ Black mini stinger CB aerial ✔ **7m high-quality RG58 coax cable** ✔ **PL259 connector fitted** ✔ Everything you need in one kit --- ## 🚙 Designed for Defender 110 ✔ **7 metre cable** – ideal length for Defender 110 ✔ Clean routing from rear to dash ✔ Proven fitment ➡️ Also available in **5m version for Defender 90** --- ## 💪 Heavy Duty Rear Mount ✔ Strong and secure fixing ✔ Designed for off-road conditions ✔ Holds aerial firmly in place ✔ Built to last --- ## 📡 Mini Stinger Aerial Included ✔ Compact springer design ✔ Flexible and impact resistant ✔ Ideal for off-road use --- ## 🔩 3/8″ Stud Compatibility ✔ Standard 3/8 mount ✔ Works with most CB & ham aerials ✔ Easy upgrades if needed --- ## 🌍 Multi-Vehicle Fitment Also suitable for: - 4×4 vehicles - Vans and trucks - High roof transit vans --- ## 🔧 Easy Installation ✔ Direct bolt-on setup ✔ Pre-fitted cable and connector ✔ Minimal setup required --- ## 📶 Reliable Performance ✔ Good grounding through vehicle body ✔ Stable antenna mounting ✔ Consistent signal performance --- ## Key Features - Complete Defender CB aerial kit - PSM-1 rear mount - Mini stinger springer antenna - 7m RG58 coax cable - PL259 connector fitted --- ## Why Choose This Kit? ✔ Designed specifically for Defenders ✔ Strong and reliable ✔ Off-road proven setup ✔ Ready to install --- ## Ideal For - Land Rover Defender 110 owners - Off-road and green laning - Work vehicles - CB radio users --- ## Straight Talking If you want the **proper Defender CB setup everyone recognises**, this is it. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-cb-aerial-rear-aerial-mount-7m-cable-land-rover-defender-110/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-cb-aerial-rear-aerial-mount-7m-cable-land-rover-defender-110/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-cb-aerial-rear-aerial-mount-7m-cable-land-rover-defender-110/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-cb-aerial-rear-aerial-mount-7m-cable-land-rover-defender-110/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20Springer%20CB%20aerial%20%26%20Rear%20Aerial%20mount%207M%20cable%20Land%20Rover%20Defender%20110&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-cb-aerial-rear-aerial-mount-7m-cable-land-rover-defender-110%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-cb-aerial-rear-aerial-mount-7m-cable-land-rover-defender-110/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-cb-aerial-rear-aerial-mount-7m-cable-land-rover-defender-110/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-cb-aerial-rear-aerial-mount-7m-cable-land-rover-defender-110/?share=telegram) - **Product categories:** CB Aerials --- ### [Copper plated earth rod with solid brass clamp earthing](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp-earthing/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **4ft Copper Bonded Earth Rod with Clamp** is a **reliable grounding solution** for **radio shacks and antenna systems**, helping to improve safety and reduce interference. --- ## ⚡ Proper Grounding Solution ✔ Ideal for **CB and amateur radio setups** ✔ Helps reduce electrical noise ✔ Improves system safety --- ## 🔩 Copper Bonded Steel Rod ✔ Steel core for strength ✔ Copper bonded outer for conductivity ✔ Long-lasting and corrosion resistant --- ## 📏 Size & Specification - **Length:** 1220mm (4ft) - **Diameter:** 9.53mm (3/8″) ✔ Easy to install in most ground conditions --- ## 🔧 Solid Brass Clamp Included ✔ High-quality brass clamp ✔ Secure cable connection ✔ Good conductivity ➡️ Clamp style may vary slightly depending on stock --- ## 📡 Ideal for Radio Installations Perfect for: - Shack grounding - Antenna earthing - Base station setups --- ## ⚠️ Important Advice ✔ **Do NOT earth your antenna system to mains earth** ✔ Use a proper earth rod for best results --- ## 🔨 Easy Installation - Drive rod into ground - Attach earth cable using clamp - Connect to your equipment ✔ Simple and effective --- ## Key Features - 4ft earth rod - Copper bonded steel - Brass clamp included - Strong and durable - Suitable for radio grounding --- ## Why Choose This Kit? ✔ Safer grounding method ✔ Improves radio performance ✔ Durable construction ✔ Easy to install --- ## Ideal For - CB radio users - Amateur radio operators - Base station setups - Outdoor antenna systems --- ## Straight Talking If you’re running a proper setup, **a proper earth isn’t optional — it’s essential**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp-earthing/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp-earthing/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp-earthing/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp-earthing/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Copper%20plated%20earth%20rod%20with%20solid%20brass%20clamp%20earthing&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcopper-plated-earth-rod-with-solid-brass-clamp-earthing%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp-earthing/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp-earthing/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/copper-plated-earth-rod-with-solid-brass-clamp-earthing/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [cb radio starter kit crt s-mini with 90cm springer flat-bar rail aerial mount](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-with-90cm-springer-flat-bar-rail-aerial-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **CRT S-MINI CB Starter Kit with Springer & Mirror Mount** is a **complete mobile CB setup**, designed to get you **on air quickly and easily**. Built around the compact **CRT S-MINI**, this kit includes a **90cm springer aerial and flat-bar mirror mount**, making it ideal for **trucks, vans, and 4×4 vehicles**. --- ## 📦 Complete Starter Package ✔ CRT S-MINI CB radio ✔ **90cm springer CB aerial** ✔ Flat-bar mirror / rail mount ✔ Coax cable (pre-fitted) ✔ Power lead & mounting bracket ✔ Everything you need to get started --- ## 📻 Simple & Reliable Radio The CRT S-MINI is perfect for beginners: - **80 channels (UK + EU)** - **AM / FM operation** - Blue channel display - Front mic socket - Manual squelch ✔ Easy to use, no complicated menus --- ## 🌍 Multi-Norm European Use ✔ Works across multiple EU frequency standards ✔ Ideal for travelling abroad ✔ Fully flexible operation --- ## 📡 Proven Antenna Setup ✔ **90cm springer aerial** ✔ Flexible and durable design ✔ Great everyday performance ➡️ Choose colour and size options at checkout --- ## 🔩 Flat Bar Mirror / Rail Mount ✔ Strong mounting solution ✔ Ideal for: - Trucks - Vans - 4x4s - Roof bars / mirror arms ✔ No drilling required --- ## 🔌 Easy Installation ✔ Plug-and-play style setup ✔ Power via cigar lighter ✔ Quick to install and use --- ## 🔊 Audio & Controls - Internal speaker - External speaker socket - RX/TX indicator - Channel up/down controls --- ## 📐 Compact Size - Approx: **150 x 140 x 41 mm** ✔ Fits easily in most vehicles --- ## ⚙️ Technical Overview - **Frequency:** - 26.965–27.405 MHz (CEPT) - 27.60125–27.99125 MHz (UK) - **Channels:** 80 - **Modes:** AM / FM - **Output Power:** Up to 8W\* \*Depending on region/settings --- ## Key Features - Complete CB starter kit - Compact multi-norm radio - 90cm springer antenna - Flat bar mirror mount - Easy installation --- ## Why Choose This Kit? ✔ Ideal for beginners ✔ Everything included ✔ Strong and reliable setup ✔ Great value --- ## Ideal For - First-time CB users - Truck and van drivers - 4×4 and off-road use - Everyday communication --- ## Straight Talking If you want a **simple, solid CB setup without messing about**, this kit ticks all the boxes. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-with-90cm-springer-flat-bar-rail-aerial-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-with-90cm-springer-flat-bar-rail-aerial-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-with-90cm-springer-flat-bar-rail-aerial-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-with-90cm-springer-flat-bar-rail-aerial-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20cb%20radio%20starter%20kit%20crt%20s-mini%20with%2090cm%20springer%20flat-bar%20rail%20aerial%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-starter-kit-crt-s-mini-with-90cm-springer-flat-bar-rail-aerial-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-with-90cm-springer-flat-bar-rail-aerial-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-with-90cm-springer-flat-bar-rail-aerial-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-with-90cm-springer-flat-bar-rail-aerial-mount/?share=telegram) - **Product categories:** CB Radio Starter Kits --- ### [Ceramic Front Brake Pads Toyota Landcruiser amazon 100 series](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-amazon-100-series/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Land Cruiser 100 Front Ceramic Brake Pads** are a **high-quality aftermarket replacement**, designed for the **Toyota Land Cruiser Amazon**. Built to **meet or exceed OE standards**, these pads deliver **strong, consistent braking performance** for both road and heavy-duty use. --- ## 🛑 Strong & Reliable Braking ✔ Excellent stopping power ✔ Consistent performance under load ✔ Confidence-inspiring braking --- ## 🔥 Ceramic Compound Benefits ✔ Lower brake dust ✔ Reduced brake noise ✔ Improved heat resistance ✔ Cleaner wheels, smoother braking --- ## 🚙 Designed for Land Cruiser 100 ✔ Direct replacement for front pads ✔ Perfect fit and compatibility ✔ Suitable for heavy 4×4 vehicles --- ## 💪 Built for Heavy Use Ideal for: - Towing - Off-road driving - Daily driving - Loaded vehicles ✔ Handles weight and demand --- ## ⚙️ OE Quality or Better ✔ Manufactured to high standards ✔ Reliable and long-lasting ✔ Comparable to original equipment --- ## 🧰 Easy Installation ✔ Direct fit replacement ✔ No modifications required ✔ Fits standard calipers --- ## 📦 What You Get ✔ Set of **front ceramic brake pads** --- ## Key Features - Front brake pad set - Ceramic compound - Land Cruiser 100 fitment - OE quality or better - Low dust and noise --- ## Why Choose These Pads? ✔ Strong braking performance ✔ Cleaner wheels ✔ Reduced noise ✔ Great value replacement --- ## Ideal For - Land Cruiser 100 owners - Daily driving - Towing and heavy use - Off-road vehicles --- ## Straight Talking These are the kind of pads you fit when you want **proper stopping power without the mess and noise**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-amazon-100-series/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-amazon-100-series/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-amazon-100-series/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-amazon-100-series/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Ceramic%20Front%20Brake%20Pads%20Toyota%20Landcruiser%20amazon%20100%20series&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fceramic-front-brake-pads-toyota-landcruiser-amazon-100-series%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-amazon-100-series/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-amazon-100-series/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ceramic-front-brake-pads-toyota-landcruiser-amazon-100-series/?share=telegram) - **Product categories:** Land Cruiser --- ### [President Liberty Wireless CB Radio DECT speaker microphone](https://cbradio.co.uk/product/president-liberty-wireless-cb-radio-dect-speaker-microphone/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **President Liberty Wireless CB Microphone** is a **modern DECT wireless speaker microphone**, giving you the freedom to operate your CB radio **without being tied to the dash**. Designed by President Electronics, it combines **speaker, microphone, and controls into one compact handheld unit**. --- ## 📡 True Wireless Freedom ✔ Up to **100 metre range** (ideal conditions) ✔ No cables between mic and radio ✔ Move around your vehicle with ease --- ## 🔊 All-in-One Speaker Microphone ✔ Built-in speaker ✔ Integrated microphone ✔ Clear audio in both directions ✔ Everything in one unit --- ## 🎙 Full Control in Your Hand - **PTT (Push-To-Talk) button** - Volume up/down controls - Easy access operation ✔ No need to reach the radio --- ## 🔋 Smart Power Features ✔ Auto power-off ✔ Efficient battery use ✔ Car charger included (mini-USB) --- ## 🚗 Designed for Mobile Use Perfect for: - Trucks and lorries - 4×4 and off-road vehicles - Vans and work vehicles ✔ Ideal when you’re in and out of the cab --- ## 🔌 Easy Charging ✔ Supplied with **car charger** ✔ Mini-USB connection ✔ Convenient in-vehicle charging --- ## 🔄 Wide Compatibility ✔ Works with **President Electronics CB radios (6-pin mic)** ✔ May work with other compatible radios ➡️ Check connection type before purchase --- ## Key Features - Wireless DECT CB microphone - Built-in speaker - Up to 100m range - PTT and volume controls - Car charger included --- ## Why Choose the Liberty? ✔ No more tangled mic cables ✔ Greater freedom of movement ✔ Easy to use and install ✔ Premium President quality --- ## Ideal For - Truck drivers - Delivery drivers - Off-road users - Anyone wanting a cleaner cab setup --- ## Straight Talking Once you go wireless, you won’t want to go back — it’s that much more convenient. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-liberty-wireless-cb-radio-dect-speaker-microphone/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-liberty-wireless-cb-radio-dect-speaker-microphone/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-liberty-wireless-cb-radio-dect-speaker-microphone/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-liberty-wireless-cb-radio-dect-speaker-microphone/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20President%20Liberty%20Wireless%20CB%20Radio%20DECT%20speaker%20microphone&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-liberty-wireless-cb-radio-dect-speaker-microphone%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-liberty-wireless-cb-radio-dect-speaker-microphone/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-liberty-wireless-cb-radio-dect-speaker-microphone/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-liberty-wireless-cb-radio-dect-speaker-microphone/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [BRITISH CB Radio Vintage 70's / 80`s Woven Sew On Arm Patch](https://cbradio.co.uk/product/british-cb-radio-vintage-70s-80s-woven-sew-on-arm-patch/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Vintage British CB Radio Sew-On Patch** is a **retro embroidered badge**, celebrating the golden era of CB radio from the **1970s / 1980s**. Featuring the classic **“British C.B’er”** design, this is a **unique piece of CB history** — perfect for collectors and enthusiasts alike. --- ## 🕰 Authentic Vintage Style ✔ Classic **70s / 80s CB culture** ✔ Retro “British C.B’er” wording ✔ Nostalgic design --- ## 🧵 Quality Embroidered Patch ✔ Woven cloth backing ✔ Detailed embroidery ✔ Durable construction --- ## 🧥 Sew-On Application ✔ Ideal for: - Jackets - Workwear - Bags - Radio gear ✔ Easy to attach --- ## 📻 A Piece of CB History ✔ Represents the original CB boom era ✔ Great conversation piece ✔ Perfect for enthusiasts --- ## 🎯 Unique Item ✔ Not a mass modern reproduction feel ✔ Character and vintage appeal ✔ Each patch may show slight age-related character --- ## 📦 Condition ✔ Please refer to images for exact condition ✔ Sold as a vintage item --- ## Key Features - Vintage CB radio patch - “British C.B’er” design - Embroidered cloth badge - Sew-on type - 70s / 80s style --- ## Why Buy This Patch? ✔ Genuine retro appeal ✔ Ideal for collectors ✔ Unique and hard to find ✔ Adds character to clothing or gear --- ## Ideal For - CB radio enthusiasts - Collectors of vintage memorabilia - Retro clothing customisation - Gifts for radio hobbyists --- ## Straight Talking If you’re into CB, this is the kind of thing that **takes you straight back to the good old days**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/british-cb-radio-vintage-70s-80s-woven-sew-on-arm-patch/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/british-cb-radio-vintage-70s-80s-woven-sew-on-arm-patch/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/british-cb-radio-vintage-70s-80s-woven-sew-on-arm-patch/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/british-cb-radio-vintage-70s-80s-woven-sew-on-arm-patch/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20BRITISH%20CB%20Radio%20Vintage%2070%27s%20%2F%2080%60s%20Woven%20Sew%20On%20Arm%20Patch&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fbritish-cb-radio-vintage-70s-80s-woven-sew-on-arm-patch%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/british-cb-radio-vintage-70s-80s-woven-sew-on-arm-patch/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/british-cb-radio-vintage-70s-80s-woven-sew-on-arm-patch/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/british-cb-radio-vintage-70s-80s-woven-sew-on-arm-patch/?share=telegram) - **Product categories:** CB radio Accessories --- ### [cb radio starter kit CRT s-mini black springer aerial and dv mount with cable](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-black-springer-aerial-and-dv-mount-with-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **CRT S-MINI CB Radio Starter Kit** is a **complete, ready-to-install CB setup**, built around the compact and reliable **CRT S-MINI**. Perfect for beginners or anyone wanting a **simple, no-hassle mobile CB installation**. --- ## 📦 Complete Kit – Everything You Need ✔ CRT S-MINI CB radio ✔ DV wing or roof mount ✔ **4m high-quality RG58 coax cable** ✔ Black mini stinger / tornado CB antenna ✔ Ready to install and get on air --- ## 📻 Compact & Feature Packed Radio The **CRT S-MINI** is a modern multi-norm CB radio with: - **AM / FM operation (4W)** - Multi-country frequency selection - Blue backlit display - Front-mounted mic socket - Channel 9 / 19 quick access - Automatic & manual squelch ✔ Small size, big performance --- ## 🌍 Multi-Norm European Use ✔ Switch between **6 frequency norms** ✔ Ideal for travelling across Europe ✔ Fully compliant radio operation --- ## 📡 Proven Antenna Setup ✔ Mini stinger antenna ✔ Durable and flexible springer design ✔ Excellent everyday performance --- ## 🔧 Flexible Mounting Options ✔ DV wing mount or roof mount included ✔ Suitable for: - 4×4 vehicles - Vans and cars - Off-road setups --- ## 🔌 Easy Installation ✔ Plug-and-play style setup ✔ Cigar lighter power lead included ✔ Minimal setup required --- ## 🔊 Audio & Controls - Internal speaker - External speaker socket - RX/TX indicator LED - Up/Down channel controls --- ## 📐 Compact Size - **180 x 123 x 38 mm** ✔ Fits easily in most vehicles --- ## ⚙️ Optional Extras - DIN mount available (for in-dash install) - External speaker recommended for some installs --- ## 🛡 Warranty ✔ **2 Year Warranty** on radio --- ## Key Features - Complete CB starter kit - Compact multi-norm radio - Mini stinger antenna - DV mount with 4m cable - Easy installation --- ## Why Choose This Kit? ✔ Everything included ✔ Easy for beginners ✔ Compact and powerful ✔ Ideal for UK & Europe --- ## Ideal For - First-time CB users - Off-road enthusiasts - Truck and van drivers - European travel --- ## Straight Talking If you want a **simple, complete CB setup that just works**, this is it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-black-springer-aerial-and-dv-mount-with-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-black-springer-aerial-and-dv-mount-with-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-black-springer-aerial-and-dv-mount-with-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-black-springer-aerial-and-dv-mount-with-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20cb%20radio%20starter%20kit%20CRT%20s-mini%20black%20springer%20aerial%20and%20dv%20mount%20with%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-starter-kit-crt-s-mini-black-springer-aerial-and-dv-mount-with-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-black-springer-aerial-and-dv-mount-with-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-black-springer-aerial-and-dv-mount-with-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-starter-kit-crt-s-mini-black-springer-aerial-and-dv-mount-with-cable/?share=telegram) - **Product categories:** CB Radio Starter Kits --- ### [9V Battery Snap on Connector Clip Tinned Wire Leads 150mm TYPE-B](https://cbradio.co.uk/product/9v-battery-snap-on-connector-clip-tinned-wire-leads-150mm-type-b/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **9V Battery Snap Connector Type B** is a **simple, reliable snap-on connector**, ideal for powering circuits, repairs, and DIY electronics projects. Supplied with **150mm tinned leads**, it’s ready for **quick and easy soldering**. --- ## 🔋 Standard 9V Battery Connector ✔ Fits standard **9V (PP3) batteries** ✔ Secure snap-on connection ✔ Reliable power contact --- ## 🔧 Tinned Leads – Ready to Use ✔ **Approx. 150mm cable length** ✔ Pre-stripped and **tinned ends** ✔ Easy soldering ✔ Saves time --- ## 🎨 Clear Polarity Identification ✔ **Red = Positive (+)** ✔ **Black = Negative (-)** ✔ Avoid wiring mistakes --- ## 💪 Durable Construction ✔ Hard plastic **Type B (T-type) connector** ✔ Lightweight and robust ✔ Suitable for repeated use --- ## ⚙️ Ideal for DIY & Repairs Perfect for: - Electronics projects - Battery-powered circuits - Repairs and replacements - Prototyping --- ## 📦 Compact & Lightweight ✔ Weight: approx **2g** ✔ Easy to store and carry --- ## Key Features - 9V battery snap connector - Type B (T-type) - 150mm leads - Tinned wire ends - Red/black polarity wires --- ## Why Choose This Connector? ✔ Quick and easy to use ✔ Reliable connection ✔ Ready for soldering ✔ Great for DIY projects --- ## Ideal For - Hobbyists - Electronics repairs - DIY builds - Prototyping --- ## Straight Talking It’s a basic part — but having it **ready-tinned saves time and hassle**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/9v-battery-snap-on-connector-clip-tinned-wire-leads-150mm-type-b/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/9v-battery-snap-on-connector-clip-tinned-wire-leads-150mm-type-b/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/9v-battery-snap-on-connector-clip-tinned-wire-leads-150mm-type-b/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/9v-battery-snap-on-connector-clip-tinned-wire-leads-150mm-type-b/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%209V%20Battery%20Snap%20on%20Connector%20Clip%20Tinned%20Wire%20Leads%20150mm%20TYPE-B&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F9v-battery-snap-on-connector-clip-tinned-wire-leads-150mm-type-b%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/9v-battery-snap-on-connector-clip-tinned-wire-leads-150mm-type-b/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/9v-battery-snap-on-connector-clip-tinned-wire-leads-150mm-type-b/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/9v-battery-snap-on-connector-clip-tinned-wire-leads-150mm-type-b/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [Authentic SIRIO DV to so239 N-PL DV mount complete aerial mounting kit 4m cable](https://cbradio.co.uk/product/authentic-sirio-dv-to-so239-n-pl-dv-mount-complete-aerial-mounting-kit-4m-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Sirio DV to SO239 Roof Mount Kit** is a **genuine high-quality Sirio mounting solution**, designed for **permanent roof or panel installations**. Supplied with **approx. 4m RG58 coax, PL259 connector, and 90° (right-angle) plug**, it’s ideal for **clean, professional antenna installs**. --- ## 🔄 DV to SO239 Conversion ✔ DV mount base with **SO239 antenna connection** ✔ Compatible with PL259 antenna fittings ✔ Suitable for CB and amateur radio antennas --- ## 📡 Wide Compatibility Ideal for: - Sirio CB antennas - Dual band VHF/UHF antennas - Mobile radio installations ✔ Flexible setup options --- ## 🔌 Complete Cable Included ✔ Approx **4 metres RG58 50Ω coax** ✔ **PL259 connector fitted** ✔ **90° (right-angle) plug** for easier cable routing --- ## 🚗 Roof / Panel Mount Design - Designed for **permanent installation** - Clean and professional finish - Excellent grounding when fitted to metal panels ✔ Best performance setup --- ## 💪 Genuine Sirio Quality ✔ Trusted brand ✔ Durable construction ✔ Reliable long-term performance --- ## 🔧 Non-Adjustable Solid Mount ✔ Fixed position for stability ✔ No movement once installed ✔ Secure antenna base --- ## 🛠 Flexible Installation Options Although designed for roof mounting, also suitable for: - Panels - Brackets - Custom installations --- ## ⚠️ Installation Notes - Requires drilling for permanent install - Ensure proper grounding for best performance - Designed for DV-style mounting systems --- ## Key Features - Genuine Sirio mount kit - DV to SO239 connection - 4m RG58 coax cable - PL259 connector fitted - 90° angled plug - Fixed (non-adjustable) mount --- ## Why Choose This Mount? ✔ Clean professional installation ✔ Excellent grounding and performance ✔ Complete ready-to-install kit ✔ Genuine Sirio quality --- ## Ideal For - Permanent vehicle installs - CB radio users - Amateur radio operators - Clean roof-mounted setups --- ## Straight Talking If you want the **best signal and a proper install**, roof mounting with a Sirio base is hard to beat. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/authentic-sirio-dv-to-so239-n-pl-dv-mount-complete-aerial-mounting-kit-4m-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/authentic-sirio-dv-to-so239-n-pl-dv-mount-complete-aerial-mounting-kit-4m-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/authentic-sirio-dv-to-so239-n-pl-dv-mount-complete-aerial-mounting-kit-4m-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/authentic-sirio-dv-to-so239-n-pl-dv-mount-complete-aerial-mounting-kit-4m-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Authentic%20SIRIO%20DV%20to%20so239%20N-PL%20DV%20mount%20complete%20aerial%20mounting%20kit%204m%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fauthentic-sirio-dv-to-so239-n-pl-dv-mount-complete-aerial-mounting-kit-4m-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/authentic-sirio-dv-to-so239-n-pl-dv-mount-complete-aerial-mounting-kit-4m-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/authentic-sirio-dv-to-so239-n-pl-dv-mount-complete-aerial-mounting-kit-4m-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/authentic-sirio-dv-to-so239-n-pl-dv-mount-complete-aerial-mounting-kit-4m-cable/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [RM KL203/P 100 Watt linear Amplifier Burner Boots for CB or HAM Radio AM FM SSB](https://cbradio.co.uk/product/rm-kl203-p-100-watt-linear-amplifier-burner-boots-for-cb-or-ham-radio-am-fm-ssb/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RM Italy KL203 Linear Amplifier** is a **compact, high-performance RF amplifier**, designed to boost your signal across **CB and 10m amateur bands**. Built by RM Italy, it delivers **strong output power with reliable performance in a small footprint**. --- ## ⚡ Powerful Signal Boost ✔ Up to **100W output power** ✔ Works across **AM / FM / SSB / CW** ✔ Ideal for improving transmit range --- ## 📡 Wide Frequency Coverage ✔ Operates across **20–30 MHz** ✔ Suitable for **CB (27 MHz) and 10m band** --- ## 🔊 Built-In Receive Preamp ✔ **26 dB antenna preamplifier** ✔ Improves receive sensitivity ✔ Helps pull in weaker signals --- ## 🔧 Compact & Easy to Install - Small footprint: **109 x 125 x 35 mm** - Lightweight: **325g** - Simple inline connection ✔ Perfect for mobile or base setups --- ## ⚙️ Technical Specifications - **Frequency:** 20–30 MHz - **Supply:** 12–14V DC - **Input Power:** 0.5–10W - **Output Power:** Up to 100W - **Current Draw:** ~10A - **Modes:** AM / FM / SSB / CW - **Fuse:** 12A --- ## ⚠️ IMPORTANT – READ BEFORE USE ### UK Legal Notice ✔ Ofcom regulations allow **maximum 4W output on CB radio** ➡️ Use of this amplifier on CB may **not be legal for transmission in the UK** --- ### Amateur Radio Use ✔ Can be used on **10m band with a valid licence** --- ### Input Power Warning ❗ **DO NOT exceed 10W input** ❗ Overdriving will damage the unit ➡️ Manufacturer does **NOT cover this under warranty** --- ## 💪 Reliable RM Italy Build Quality ✔ Proven design ✔ Durable construction ✔ Trusted brand in RF amplification --- ## Key Features - 100W RF amplifier - Covers 20–30 MHz - AM / FM / SSB / CW modes - Built-in receive preamp - Compact design --- ## Why Choose the KL203? ✔ Strong performance for its size ✔ Easy to install ✔ Improves TX and RX ✔ Trusted manufacturer --- ## Ideal For - 10m amateur radio users - Base station upgrades - Mobile installs - Users needing extra signal boost --- ## Straight Talking Used correctly, this gives a **noticeable boost** — misuse it, and it’ll cost you. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rm-kl203-p-100-watt-linear-amplifier-burner-boots-for-cb-or-ham-radio-am-fm-ssb/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rm-kl203-p-100-watt-linear-amplifier-burner-boots-for-cb-or-ham-radio-am-fm-ssb/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rm-kl203-p-100-watt-linear-amplifier-burner-boots-for-cb-or-ham-radio-am-fm-ssb/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rm-kl203-p-100-watt-linear-amplifier-burner-boots-for-cb-or-ham-radio-am-fm-ssb/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20RM%20KL203%2FP%20100%20Watt%20linear%20Amplifier%20Burner%20Boots%20for%20CB%20or%20HAM%20Radio%20AM%20FM%20SSB&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frm-kl203-p-100-watt-linear-amplifier-burner-boots-for-cb-or-ham-radio-am-fm-ssb%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rm-kl203-p-100-watt-linear-amplifier-burner-boots-for-cb-or-ham-radio-am-fm-ssb/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rm-kl203-p-100-watt-linear-amplifier-burner-boots-for-cb-or-ham-radio-am-fm-ssb/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rm-kl203-p-100-watt-linear-amplifier-burner-boots-for-cb-or-ham-radio-am-fm-ssb/?share=telegram) - **Product categories:** Linear Amplifiers --- ### [Sirio Performer 5000 3/8" Fitting Centre load Trucker CB aerial + tx LED](https://cbradio.co.uk/product/sirio-performer-5000-3-8-fitting-centre-load-trucker-cb-aerial-tx-led/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Sirio Performer 5000 LED Trucker Antenna** is one of the **most powerful and best-performing mobile antennas available**, now featuring a **built-in LED PCB that lights up when transmitting**. Designed and manufactured in Italy by Sirio, this is a **serious antenna for serious operators**. --- ## 💡 Unique LED Transmit Indicator ✔ Built-in **LED PCB** ✔ Lights up when transmitting ✔ Adds visibility and style ✔ Stand out day or night --- ## 📡 High Performance Coverage ✔ Tunable from **27–30 MHz** ✔ Covers **CB and 10 metre band** ✔ Wide bandwidth – over **2600 KHz** --- ## ⚡ Massive Power Handling ✔ **1500W continuous (CW)** ✔ Up to **5000W (duty cycle 5 min on / 5 min off)** ✔ Built for high-power setups --- ## 🧲 Centre Loaded Design - Low loss coil using **10 AWG (2.5mm) copper wire** - Efficient radiation - Strong signal performance --- ## 📏 Full Size Trucker Antenna ✔ Height: **2.08m (82″)** ✔ Excellent range and performance ✔ Ideal for long-distance communication --- ## 💪 Premium Materials ✔ **17/7 PH tapered stainless steel whip** ✔ Strong and flexible ✔ Corrosion resistant --- ## 🔩 Standard 3/8″ Mount ✔ Fits most heavy-duty mounts ✔ Ideal for mirror, roof bar or body mounts --- ## 🇮🇹 Designed & Built in Italy ✔ Genuine Sirio engineering ✔ Proven performance ✔ High manufacturing quality --- ## Technical Specifications - **Frequency:** 27–30 MHz - **Height:** 2.08m - **Power:** 1500W continuous / 5000W peak - **SWR:** < 1.2 - **Impedance:** 50 Ohm - **Whip:** 1.8m stainless steel - **Fitting:** 3/8″ x 24 male --- ## Key Features - LED transmit indicator - High power handling - Wide frequency coverage - Centre loaded design - Premium stainless construction --- ## Why Choose the Performer 5000? ✔ One of the best-performing mobile antennas ✔ Handles serious power ✔ Unique LED feature ✔ Built for long-term use --- ## Ideal For - Truck drivers - High-power CB users - 10m amateur operators - Long-distance communication --- ## Straight Talking If you want **top-tier performance with a bit of show**, this is one of the best antennas you can bolt onto your vehicle. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range10.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-performer-5000-3-8-fitting-centre-load-trucker-cb-aerial-tx-led/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-performer-5000-3-8-fitting-centre-load-trucker-cb-aerial-tx-led/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-performer-5000-3-8-fitting-centre-load-trucker-cb-aerial-tx-led/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-performer-5000-3-8-fitting-centre-load-trucker-cb-aerial-tx-led/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20Performer%205000%203%2F8%22%20Fitting%20Centre%20load%20Trucker%20CB%20aerial%20%2B%20tx%20LED&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-performer-5000-3-8-fitting-centre-load-trucker-cb-aerial-tx-led%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-performer-5000-3-8-fitting-centre-load-trucker-cb-aerial-tx-led/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-performer-5000-3-8-fitting-centre-load-trucker-cb-aerial-tx-led/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-performer-5000-3-8-fitting-centre-load-trucker-cb-aerial-tx-led/?share=telegram) - **Product categories:** Sirio cb Antennas --- ### [Toyota Landcruiser 4.5 set of new front prop-shaft UJ FZJ HDJ80 Universal joint](https://cbradio.co.uk/product/toyota-landcruiser-4-5-set-of-new-front-prop-shaft-uj-fzj-hdj80-universal-joint/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Land Cruiser 80 Front Propshaft UJ Kit** is a **set of high-quality universal joints**, designed for the **front prop shaft** of the **Toyota Land Cruiser 80 Series**. Ideal for fixing **vibration, clunking, or driveline play**, restoring smooth operation. --- ## 🔧 Complete Front Propshaft UJ Set ✔ Set of universal joints for front prop shaft ✔ Direct replacement for worn components ✔ Restores smooth driveline operation --- ## 🚙 Vehicle Compatibility Fits: - **FZJ80** - **HDJ80** ➡️ May also fit other models – check dimensions before purchase --- ## 💪 Quality Components ✔ Built to OE standards ✔ Strong and durable construction ✔ Suitable for heavy-duty use --- ## ⚙️ Fix Common Driveline Issues Replace worn UJs to cure: - Vibration under load - Clunking when pulling away - Excess play in propshaft - Uneven drivetrain movement --- ## ⚠️ Brand Note (Important) ✔ **Brand may vary depending on stock availability** ✔ All supplied joints are **quality, tested components** ✔ Performance and fitment remain consistent --- ## 🔩 Precision Fit ✔ Direct fit replacement ✔ Correct tolerances ✔ Designed for reliable operation --- ## 🛠 Built for Heavy Use ✔ Suitable for off-road and towing ✔ Handles high torque loads ✔ Long service life --- ## 📦 What You Get ✔ Set of universal joints (front prop shaft) --- ## Key Features - Front propshaft UJ kit - Fits Land Cruiser 80 Series - High-quality components - Heavy duty construction - Direct replacement --- ## Why Choose This Kit? ✔ Reliable and durable ✔ Fixes common driveline faults ✔ Cost-effective repair ✔ Suitable for demanding use --- ## Ideal For - Land Cruiser 80 owners - Off-road vehicles - Maintenance and repair - Driveline rebuilds --- ## Straight Talking You’re getting **quality parts that do the job properly — regardless of brand name on the box**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-4-5-set-of-new-front-prop-shaft-uj-fzj-hdj80-universal-joint/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-4-5-set-of-new-front-prop-shaft-uj-fzj-hdj80-universal-joint/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-4-5-set-of-new-front-prop-shaft-uj-fzj-hdj80-universal-joint/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-4-5-set-of-new-front-prop-shaft-uj-fzj-hdj80-universal-joint/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20Landcruiser%204.5%20set%20of%20new%20front%20prop-shaft%20UJ%20%20FZJ%20HDJ80%20Universal%20joint&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-4-5-set-of-new-front-prop-shaft-uj-fzj-hdj80-universal-joint%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-4-5-set-of-new-front-prop-shaft-uj-fzj-hdj80-universal-joint/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-4-5-set-of-new-front-prop-shaft-uj-fzj-hdj80-universal-joint/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-4-5-set-of-new-front-prop-shaft-uj-fzj-hdj80-universal-joint/?share=telegram) - **Product categories:** Land Cruiser --- ### [suspension kit toyota landcruiser heavy duty amazon 1998-2007 AHC replacement](https://cbradio.co.uk/product/suspension-kit-toyota-landcruiser-heavy-duty-amazon-1998-2007-ahc-replacement/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Land Cruiser 100 AHC Conversion Suspension Kit** is a **complete heavy-duty upgrade**, designed to replace the problematic factory **AHC (Active Height Control)** system with a **reliable coil spring and shock setup**. Specifically for the **Toyota Land Cruiser Amazon 4.7 V8**, this kit is ideal for **towing, off-road use, and long-term reliability**. --- ## 🔧 Complete Suspension Conversion Kit ✔ Rear **coil springs + foam cell shocks** ✔ Front **torsion bars + foam cell shocks** ✔ Full AHC delete solution ✔ Everything you need in one kit --- ## 💪 Heavy Duty Specification ✔ Designed for **towing and load carrying** ✔ Ideal for vehicles with **winch bumpers or extra weight** ✔ Built for off-road and hard use --- ## 🚫 Solve AHC Problems for Good The factory AHC system is great… **until it isn’t**. Common failures include: - Height sensors failing - Hydraulic pump issues - Gas spheres losing pressure ➡️ Leads to warning lights, poor ride, and expensive repairs --- ## 🔄 Why Convert to Conventional Suspension? ✔ Eliminates complex hydraulic system ✔ Removes costly failure points ✔ Simple, reliable setup ➡️ No more expensive AHC repairs --- ## 📡 How AHC Fails Over Time As springs weaken: - System increases hydraulic pressure - Components become overstressed - Failures accelerate ➡️ Especially common on older or heavily loaded vehicles --- ## 🚙 Built for Real-World Use Perfect for: - Towing setups - Overland builds - Off-road vehicles - Daily drivers needing reliability --- ## ⚙️ Engine-Specific Fitment ✔ Designed for **4.7 V8 models** ✔ Torsion bars vary by engine ➡️ **Please confirm engine type at checkout** --- ## 📦 Supplied in 3 Boxes - **Box 1:** 14kg – 55 × 20 × 18 cm - **Box 2:** 17.2kg – 124 × 14 × 7 cm - **Box 3:** 19kg – 63 × 48 × 25 cm --- ## 🎯 Optional Ride Heights ✔ Standard height option ✔ Raised height option available --- ## Key Features - Full AHC delete suspension kit - Heavy duty springs and shocks - Foam cell shock absorbers - Front torsion bars included - Designed for Land Cruiser 100 --- ## Why Choose This Kit? ✔ Eliminates unreliable AHC system ✔ Long-term reliability ✔ Handles heavy loads and towing ✔ Proven upgrade solution --- ## Ideal For - Land Cruiser 100 owners - Vehicles with failing AHC - Off-road and overland builds - Heavy-duty use --- ## Straight Talking The AHC system is brilliant when new — but once it starts failing, it gets expensive fast. This kit removes the headache and gives you **simple, dependable suspension**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/suspension-kit-toyota-landcruiser-heavy-duty-amazon-1998-2007-ahc-replacement/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/suspension-kit-toyota-landcruiser-heavy-duty-amazon-1998-2007-ahc-replacement/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/suspension-kit-toyota-landcruiser-heavy-duty-amazon-1998-2007-ahc-replacement/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/suspension-kit-toyota-landcruiser-heavy-duty-amazon-1998-2007-ahc-replacement/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20suspension%20kit%20toyota%20landcruiser%20heavy%20duty%20amazon%201998-2007%20AHC%20replacement&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsuspension-kit-toyota-landcruiser-heavy-duty-amazon-1998-2007-ahc-replacement%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/suspension-kit-toyota-landcruiser-heavy-duty-amazon-1998-2007-ahc-replacement/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/suspension-kit-toyota-landcruiser-heavy-duty-amazon-1998-2007-ahc-replacement/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/suspension-kit-toyota-landcruiser-heavy-duty-amazon-1998-2007-ahc-replacement/?share=telegram) - **Product categories:** Land Cruiser --- ### [din in dash mount face plate for midland 203 38 98 team ts-6m s-mini cb radio](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-midland-203-38-98-team-ts-6m-s-mini-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Metal DIN Mount Kit for CB Radios** allows you to install your CB radio neatly into a **standard DIN dashboard slot**, giving a **clean, factory-style finish**. Built from **heavy-duty metal**, this mount is far superior to cheap plastic alternatives. --- ## 🚗 Professional In-Dash Installation ✔ Fits standard car stereo DIN slots ✔ Hides wiring and brackets ✔ Clean, factory-fitted appearance --- ## 💪 Heavy Duty Metal Construction - Strong all-metal casing - Durable and long-lasting - Won’t flex or crack like plastic mounts ✔ Built properly --- ## 📻 Compatible Radios Fits: - Team TS-6M - Midland 203 / Midland 210 / Midland 38 / Midland 98 - TTi TCB-550 / TTi TCB-560 / TTi TCB-565 - CRT S-Mini --- ## 📐 Slot Dimensions - **124mm x 38mm** - Designed specifically for compatible CB radios --- ## ⚠️ Important Notes - **DIN mount only – radio NOT included** - Internal speaker may be covered ➡️ External speaker recommended --- ## 🔧 Easy Installation - Slide into DIN slot - Secure mount - Insert radio ✔ Quick and straightforward --- ## 🎯 Clean Dashboard Finish ✔ No hanging brackets ✔ No messy wiring ✔ Professional install look --- ## Key Features - DIN in-dash CB radio mount - Heavy-duty metal construction - Fits multiple radio models - Clean installation solution - Standard DIN compatibility --- ## Why Choose This Mount? ✔ Stronger than plastic versions ✔ Improves dashboard appearance ✔ Designed for specific radios ✔ Reliable and long-lasting --- ## Ideal For - Car and van installs - Professional setups - Clean dashboard builds - CB radio users --- ## Straight Talking If you want your CB to look like it **came with the vehicle**, this is the way to do it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-midland-203-38-98-team-ts-6m-s-mini-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-midland-203-38-98-team-ts-6m-s-mini-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-midland-203-38-98-team-ts-6m-s-mini-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-midland-203-38-98-team-ts-6m-s-mini-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20din%20in%20dash%20mount%20face%20plate%20for%20midland%20203%2038%2098%20team%20ts-6m%20s-mini%20cb%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdin-in-dash-mount-face-plate-for-midland-203-38-98-team-ts-6m-s-mini-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-midland-203-38-98-team-ts-6m-s-mini-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-midland-203-38-98-team-ts-6m-s-mini-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/din-in-dash-mount-face-plate-for-midland-203-38-98-team-ts-6m-s-mini-cb-radio/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [2 X V BOLT U bolts 2.5" (50mm)](https://cbradio.co.uk/product/2-x-v-bolt-u-bolts-2-5-aerial-satellite-pole-up-to-2-50mm-mast-cb-radio-ham/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **2x V-Bolt U-Bolt Mast Clamps** are **heavy-duty fixing bolts**, designed for securely attaching **aerials, brackets, and mounts to poles or masts**. Used by professionals, these are ideal for **CB, satellite and general antenna installations**. --- ## 🔩 Heavy Duty Fixing Solution ✔ Strong steel construction ✔ Designed for secure clamping ✔ Suitable for demanding installations ✔ Built to hold firm --- ## 📏 Fits Standard Mast Sizes - Suitable for poles up to **2″ (50mm)** diameter - Ideal for aerial and satellite masts ✔ Versatile compatibility --- ## 📦 Supplied as a Pair ✔ **2 x V-bolts included** ✔ Complete with nuts ✔ Ready to install --- ## 📡 Multi-Purpose Use Perfect for: - Aerial mast installations - Satellite dish mounting - CB antenna brackets (bull bars, mirror mounts etc.) - General fixing applications --- ## 💪 Professional Quality ✔ Used in trade installations ✔ Reliable and long-lasting ✔ Strong clamping force --- ## 🔧 Easy Installation - Position around mast or pole - Tighten nuts - Secure bracket or mount ✔ Simple and effective --- ## 🌧 Outdoor Ready ✔ Suitable for external use ✔ Designed to handle weather exposure --- ## Key Features - 2 x V-bolt U-bolts - Fits up to 50mm mast - Heavy duty construction - Supplied with nuts - Multi-purpose use --- ## Why Choose These U-Bolts? ✔ Strong and reliable ✔ Suitable for multiple applications ✔ Easy to fit ✔ Trade-quality hardware --- ## Ideal For - Antenna installers - CB and ham radio setups - Satellite installations - DIY and trade use --- ## Straight Talking If you want your aerial mount to **stay exactly where you put it**, these do the job properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2-x-v-bolt-u-bolts-2-5-aerial-satellite-pole-up-to-2-50mm-mast-cb-radio-ham/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2-x-v-bolt-u-bolts-2-5-aerial-satellite-pole-up-to-2-50mm-mast-cb-radio-ham/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2-x-v-bolt-u-bolts-2-5-aerial-satellite-pole-up-to-2-50mm-mast-cb-radio-ham/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2-x-v-bolt-u-bolts-2-5-aerial-satellite-pole-up-to-2-50mm-mast-cb-radio-ham/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202%20X%20V%20BOLT%20U%20bolts%20%202.5%22%20%2850mm%29&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2-x-v-bolt-u-bolts-2-5-aerial-satellite-pole-up-to-2-50mm-mast-cb-radio-ham%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2-x-v-bolt-u-bolts-2-5-aerial-satellite-pole-up-to-2-50mm-mast-cb-radio-ham/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2-x-v-bolt-u-bolts-2-5-aerial-satellite-pole-up-to-2-50mm-mast-cb-radio-ham/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2-x-v-bolt-u-bolts-2-5-aerial-satellite-pole-up-to-2-50mm-mast-cb-radio-ham/?share=telegram) - **Product categories:** CB radio Accessories, Installation aid --- ### [Mini8 25m Low loss 50 Ohm coax cable RG8x with 2 x PL259 HAM or CB radio](https://cbradio.co.uk/product/mini8-25m-low-loss-50-ohm-coax-cable-rg8x-with-2-x-pl259-ham-or-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini-8 RG8 25m Coax Cable** is a **high-quality low loss 50 Ohm coax**, offering **RG213-style performance in a slimmer, flexible format**. Ideal for **medium to long cable runs**, it’s perfect for **CB and amateur radio base station or mobile installations**. --- ## 📡 Low Loss Performance ✔ Comparable to RG213 (RG213UBX) ✔ Reduced signal loss over distance ✔ Ideal for base station setups --- ## 🔧 Flexible Mini-8 Design - Diameter: **6.1mm (similar to RG58)** - Easier to route than RG213 - Perfect for tight installs and cable runs ✔ Performance + flexibility combined --- ## 🔌 Ready to Install ✔ **25 metre length** ✔ **One PL259 connector pre-soldered** ✔ Ideal for feeding through walls or conduit ➡️ Option to have both ends fitted on request --- ## 💪 High Quality Construction - **Stranded copper core** - **Foam polyethylene dielectric** - **95% copper braid shielding** ✔ Strong, flexible and efficient --- ## 📶 Excellent Shielding ✔ Screening effectiveness **>55dB (100–900 MHz)** ✔ Reduced interference and noise --- ## ⚡ Technical Performance **Attenuation (dB per 100m):** - 50 MHz – 7.2 dB - 100 MHz – 10.5 dB - 400 MHz – 22.2 dB - 600 MHz – 27.6 dB - 1000 MHz – 37.0 dB ✔ Reliable across HF, VHF & UHF --- ## 🧵 Quality Materials ✔ Plain copper inner conductor ✔ Foam dielectric for lower loss ✔ Low smoke PVC outer sheath --- ## 🔁 Other Lengths Available ✔ 10m / 15m / 20m / 25m / 30m / 40m ✔ Custom options available --- ## Key Features - Mini-8 RG8 coax cable - 25 metre length - Low loss 50 Ohm - Flexible 6.1mm diameter - PL259 connector fitted --- ## Why Choose This Cable? ✔ Low loss without bulk ✔ Easy installation ✔ High quality construction ✔ Ideal for medium-long runs --- ## Ideal For - CB radio base stations - Amateur radio setups - External antenna installs - Shack-to-antenna runs --- ## Straight Talking If you want **proper performance without wrestling thick cable**, this is the sweet spot. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini8-25m-low-loss-50-ohm-coax-cable-rg8x-with-2-x-pl259-ham-or-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini8-25m-low-loss-50-ohm-coax-cable-rg8x-with-2-x-pl259-ham-or-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini8-25m-low-loss-50-ohm-coax-cable-rg8x-with-2-x-pl259-ham-or-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini8-25m-low-loss-50-ohm-coax-cable-rg8x-with-2-x-pl259-ham-or-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini8%2025m%20Low%20loss%2050%20Ohm%20coax%20cable%20RG8x%20with%202%20x%20PL259%20HAM%20or%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini8-25m-low-loss-50-ohm-coax-cable-rg8x-with-2-x-pl259-ham-or-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini8-25m-low-loss-50-ohm-coax-cable-rg8x-with-2-x-pl259-ham-or-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini8-25m-low-loss-50-ohm-coax-cable-rg8x-with-2-x-pl259-ham-or-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini8-25m-low-loss-50-ohm-coax-cable-rg8x-with-2-x-pl259-ham-or-cb-radio/?share=telegram) - **Product categories:** RG8 mini8 --- ### [Laminated CB radio Frequency chart SS low to SS High full colour Cobra 148](https://cbradio.co.uk/product/laminated-cb-radio-frequency-chart-ss-low-to-ss-high-full-colour-cobra-148/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Laminated CB Radio Frequency Chart** is a **high-quality, full-colour reference guide** covering a wide range of CB frequencies — ideal for both beginners and experienced operators. Printed and laminated for durability, it’s a **must-have quick reference for any CB setup**. --- ## 📡 Wide Frequency Coverage ✔ Covers **25.615 MHz to 28.755 MHz** ✔ Includes **A–F band layout** ✔ Matches radios like the Superstar 3900 ✔ Full band reference in one place --- ## 🇬🇧 UK FM Channels Included ✔ Separate colour-coded section ✔ Displays **UK FM channels and frequencies** ✔ Easy to read and identify --- ## 🎨 Full Colour Layout - Clearly organised bands - Colour-coded sections - Easy to read at a glance ✔ No confusion --- ## 💪 Laminated for Durability ✔ Printed on high-quality paper ✔ Fully laminated ✔ Resistant to wear, dirt and moisture ✔ Built to last in the shack or vehicle --- ## 🖨 High Quality Print - Produced using professional colour laser printing - Sharp text and clear layout --- ## 🧠 Perfect Quick Reference ✔ Keep in your shack ✔ Use in your vehicle ✔ Ideal for learning and quick checks --- ## 📚 Expand Your Setup ➡️ Check our shop for matching **amateur radio band plans** --- ## Key Features - Laminated CB frequency chart - Full colour print - Covers A–F bands - UK FM channel section - Durable and long-lasting --- ## Why Choose This Chart? ✔ Clear and easy to read ✔ Covers extended CB bands ✔ Durable laminated finish ✔ Useful for all CB users --- ## Ideal For - CB radio beginners - Experienced operators - Mobile and base setups - Training and reference --- ## Straight Talking It’s one of those things you don’t think you need — until you’ve got one. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/laminated-cb-radio-frequency-chart-ss-low-to-ss-high-full-colour-cobra-148/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/laminated-cb-radio-frequency-chart-ss-low-to-ss-high-full-colour-cobra-148/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/laminated-cb-radio-frequency-chart-ss-low-to-ss-high-full-colour-cobra-148/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/laminated-cb-radio-frequency-chart-ss-low-to-ss-high-full-colour-cobra-148/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Laminated%20CB%20radio%20Frequency%20chart%20SS%20low%20to%20SS%20High%20full%20colour%20Cobra%20148&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flaminated-cb-radio-frequency-chart-ss-low-to-ss-high-full-colour-cobra-148%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/laminated-cb-radio-frequency-chart-ss-low-to-ss-high-full-colour-cobra-148/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/laminated-cb-radio-frequency-chart-ss-low-to-ss-high-full-colour-cobra-148/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/laminated-cb-radio-frequency-chart-ss-low-to-ss-high-full-colour-cobra-148/?share=telegram) - **Product categories:** CB Radio Accessories --- ### [Steering Wheel Airbag Toyota Landcruiser Amazon (100 series) 1998-2002](https://cbradio.co.uk/product/steering-wheel-airbag-toyota-landcruiser-amazon-100-series-1998-2002/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Land Cruiser 100 Driver Airbag (Beige)** is a **genuine OEM airbag module**, removed from a **Toyota Land Cruiser Amazon** currently being dismantled. --- ## ⚠️ IMPORTANT – READ BEFORE BUYING ✔ **THIS LISTING IS FOR THE AIRBAG MODULE ONLY** ❌ **STEERING WHEEL NOT INCLUDED** --- ## 🚗 Driver Side (O/S) Fitment ✔ Designed for **driver’s side (offside / right-hand drive)** ✔ Suitable for UK-spec vehicles --- ## 🎨 Beige Interior Match ✔ Correct colour for beige interior trims ✔ Maintains original factory look --- ## 🔧 Genuine OEM Part ✔ Original Toyota component ✔ Correct fit and compatibility ✔ Better than aftermarket alternatives --- ## 🧩 Direct Replacement ✔ Designed to fit original steering wheel ✔ Plug-and-play installation (subject to vehicle compatibility) --- ## ♻️ Removed from Donor Vehicle ✔ Taken from a dismantled Land Cruiser 100 ✔ Stored and handled carefully --- ## 📦 Condition - Used OEM part - May show light cosmetic wear consistent with age - Airbag module intact --- ## ⚠️ Safety & Installation Notes - Airbags are **safety-critical components** - Must be fitted by a **qualified professional** - Always follow manufacturer guidelines --- ## Key Features - Driver side airbag module - Beige colour - Genuine Toyota OEM part - Land Cruiser 100 Series fitment - Steering wheel NOT included --- ## Why Buy This Airbag? ✔ Genuine OEM quality ✔ Correct colour match ✔ Cost-effective vs dealer ✔ Direct replacement --- ## Ideal For - Airbag replacement - Interior restoration - Accident repair - Land Cruiser 100 owners --- ## Straight Talking Make sure you’re buying the **right part — this is the airbag only, not the full steering wheel**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/steering-wheel-airbag-toyota-landcruiser-amazon-100-series-1998-2002/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/steering-wheel-airbag-toyota-landcruiser-amazon-100-series-1998-2002/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/steering-wheel-airbag-toyota-landcruiser-amazon-100-series-1998-2002/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/steering-wheel-airbag-toyota-landcruiser-amazon-100-series-1998-2002/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Steering%20Wheel%20Airbag%20Toyota%20Landcruiser%20Amazon%20%28100%20series%29%20%201998-2002&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsteering-wheel-airbag-toyota-landcruiser-amazon-100-series-1998-2002%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/steering-wheel-airbag-toyota-landcruiser-amazon-100-series-1998-2002/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/steering-wheel-airbag-toyota-landcruiser-amazon-100-series-1998-2002/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/steering-wheel-airbag-toyota-landcruiser-amazon-100-series-1998-2002/?share=telegram) - **Product categories:** Land Cruiser --- ### [Rear Heater Controls 1998 2003 Toyota Land cruiser Amazon 100 series](https://cbradio.co.uk/product/rear-heater-controls-1998-2003-toyota-land-cruiser-amazon-100-series/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Land Cruiser 100 Rear Heater Control Switch** is a **genuine used component**, removed from a **1998 Toyota Land Cruiser Amazon 4.7 V8** currently being dismantled. Fully tested and in **working order**, this is an ideal replacement for faulty or non-functioning rear heater controls. --- ## 🔧 Genuine OEM Part ✔ Original Toyota component ✔ Proper fit and function ✔ Better than aftermarket alternatives --- ## ✅ Tested & Working ✔ Removed from running vehicle ✔ Checked before removal ✔ Fully functional --- ## 🚙 Vehicle Compatibility - Fits **Toyota Land Cruiser 100 Series (Amazon)** - Suitable for models with rear heater control system ➡️ Always check part numbers/compatibility before purchase --- ## 🔌 Direct Replacement ✔ Plug-and-play fitment ✔ No modifications required ✔ Straight swap --- ## 💰 Cost Effective Solution ✔ Save vs dealer prices ✔ Genuine quality at a fraction of the cost --- ## ♻️ Recycled OEM Part ✔ Environmentally friendly choice ✔ Reuse original components --- ## 📦 Condition - Used part - May show minor signs of wear consistent with age - Fully working condition --- ## Key Features - Genuine Toyota part - Rear heater control switch - Removed from 1998 4.7 V8 - Tested and working - Direct replacement --- ## Why Buy This Part? ✔ Genuine OEM reliability ✔ Fully tested ✔ Cost-effective replacement ✔ Ready to install --- ## Ideal For - Faulty rear heater controls - Restoration projects - Maintenance and repair - Land Cruiser owners --- ## Straight Talking Why pay dealer prices when a **tested genuine part does the job just as well**? ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/rear-heater-controls-1998-2003-toyota-land-cruiser-amazon-100-series/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/rear-heater-controls-1998-2003-toyota-land-cruiser-amazon-100-series/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/rear-heater-controls-1998-2003-toyota-land-cruiser-amazon-100-series/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/rear-heater-controls-1998-2003-toyota-land-cruiser-amazon-100-series/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Rear%20Heater%20Controls%201998%202003%20Toyota%20Land%20cruiser%20Amazon%20100%20series&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Frear-heater-controls-1998-2003-toyota-land-cruiser-amazon-100-series%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/rear-heater-controls-1998-2003-toyota-land-cruiser-amazon-100-series/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/rear-heater-controls-1998-2003-toyota-land-cruiser-amazon-100-series/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/rear-heater-controls-1998-2003-toyota-land-cruiser-amazon-100-series/?share=telegram) - **Product categories:** Land Cruiser --- ### [4 Way Guy Ring Spider Galvanised](https://cbradio.co.uk/product/4-way-guy-ring-spider-mast-collar-wire-rope-galvanised/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **4 Way Guy Ring Mast Collar** is a **heavy-duty galvanised steel support ring**, designed to stabilise **aerial masts using guy wires**. Ideal for both **permanent installations and portable setups**, it provides **secure 4-point support for your mast**. --- ## 🧵 4-Way Guy Support ✔ 4 attachment points for guy ropes ✔ Even load distribution ✔ Increased mast stability ✔ Essential for taller masts --- ## 🔩 Fits Standard Mast Sizes - Suitable for **1.5″ to 2″ round masts** - Clamps securely in place ✔ Versatile fitment --- ## 💪 Galvanised Steel Construction ✔ Rust-resistant coating ✔ Strong and durable ✔ Suitable for outdoor use --- ## 📡 Improves Mast Stability - Reduces movement in wind - Prevents bending and stress - Protects your antenna setup ✔ Safer installations --- ## 🏕 Ideal for Portable & Fixed Use Perfect for: - SOTA (Summits on the Air) setups - Temporary masts - Permanent aerial installations - Amateur radio and TV masts --- ## 🔧 Easy Installation - Clamp onto mast - Attach guy ropes or wires - Tension evenly ✔ Quick and effective --- ## Key Features - 4-way guy ring - Fits 1.5″–2″ masts - Galvanised steel construction - Heavy duty design - Outdoor ready --- ## Why Choose This Guy Ring? ✔ Strong and reliable support ✔ Easy to install ✔ Suitable for many applications ✔ Built for long-term use --- ## Ideal For - Amateur radio operators - Antenna installers - Portable mast setups - TV aerial installations --- ## Straight Talking If you’re putting up a mast, this is the bit that **stops it swaying all over the place**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/4-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/4-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/4-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/4-way-guy-ring-spider-mast-collar-wire-rope-galvanised/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%204%20Way%20Guy%20Ring%20Spider%20Galvanised&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F4-way-guy-ring-spider-mast-collar-wire-rope-galvanised%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/4-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/4-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/4-way-guy-ring-spider-mast-collar-wire-rope-galvanised/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [mb400 so239 sturdy boot mount 4m cable](https://cbradio.co.uk/product/mb400-so239-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **MB-400 Boot Mount Kit** is a **high-quality, heavy-duty antenna mount**, designed for **boot / hatch installations** on cars and vehicles. Supplied with **4m RG58 coax cable and PL259 connector**, it’s a **complete, ready-to-install solution** for CB and amateur radio antennas. --- ## 💪 Heavy Duty Build Quality ✔ Strong and durable construction ✔ Designed for long-term use ✔ Secure mounting under vibration ✔ Built to last --- ## 🚗 Boot / Hatch Mount Design - Fits onto boot edge or hatch - No drilling required - Clean and discreet installation ✔ Ideal for modern vehicles --- ## 🔌 SO239 Antenna Connection ✔ Standard **SO239 socket** ✔ Compatible with PL259 antennas ✔ Suitable for CB and ham setups --- ## 📡 Complete Cable Included ✔ **4 metre RG58 coax cable** ✔ **PL259 connector fitted** ✔ Ready to connect to your radio --- ## 📻 Compatible with Popular Antennas Works with antennas such as: - Sirio Performer 4000 - Yaesu ATAS-120 ✔ Supports larger mobile antennas --- ## 🔧 Easy Installation - Clamp onto boot edge - Tighten securely - Route cable into vehicle ✔ No complicated setup --- ## 🌧 Built for Outdoor Use ✔ Weather resistant ✔ Reliable in all conditions ✔ Ideal for daily driving --- ## Key Features - Heavy duty boot mount - SO239 antenna socket - 4m RG58 coax cable - PL259 connector fitted - No-drill installation --- ## Why Choose the MB-400? ✔ Stronger than basic mounts ✔ Complete ready-to-use kit ✔ Flexible installation option ✔ Suitable for larger antennas --- ## Ideal For - Cars and hatchbacks - Mobile CB setups - Amateur radio installs - Temporary or permanent installs --- ## Straight Talking If you don’t want to drill your car but still want a **proper antenna setup**, this is a solid choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mb400-so239-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mb400-so239-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mb400-so239-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mb400-so239-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mb400%20so239%20sturdy%20boot%20mount%204m%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmb400-so239-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mb400-so239-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mb400-so239-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mb400-so239-sturdy-boot-mount-for-amateur-or-cb-radio-antenna-4m-cable/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [so239 to reverse SMA female adaptor](https://cbradio.co.uk/product/so239-to-reverse-sma-female-adaptor-for-uv5r-wouxun-icom-tyt-fdc/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **SO239 to SMA Female Adapter** allows you to connect **PL259 coax cables or base antennas** directly to handheld radios with a **reverse SMA (SMA-F) antenna socket**. Perfect for turning your handheld into a **home base or mobile setup with improved performance**. --- ## 🔄 SO239 to SMA Conversion ✔ Converts **SO239 → SMA Female (reverse SMA)** ✔ Accepts **PL259 plugs** from coax cables ✔ Connect directly to handheld radios --- ## 📡 Connect External Antennas - Use **base station antennas** - Connect **mag mounts or mobile setups** - Improve reception and transmit range ✔ Big upgrade over stock antenna --- ## 📻 Compatible Radios Works with many handhelds including: - Baofeng UV-5R - Wouxun - Quansheng - TYT - Icom ✔ Fits most SMA-based handheld radios --- ## 🔧 Easy to Use - Screw onto radio antenna port - Connect coax cable with PL259 - Ready to operate ✔ No tools required --- ## 💪 Solid Metal Construction ✔ Durable and reliable ✔ Secure connection ✔ Built for regular use --- ## 🏠 Ideal for Multiple Setups - Home base station setups - Mobile antenna use - Scanner setups - Handheld radio upgrades --- ## ⚠️ Important Note ✔ Designed for **reverse SMA (SMA-F) radios** ➡️ Always check your radio connector before purchase --- ## Key Features - SO239 to SMA female adapter - Accepts PL259 coax connectors - Compatible with handheld radios - Strong metal construction - Easy installation --- ## Why Choose This Adapter? ✔ Simple conversion solution ✔ Expands antenna options ✔ Reliable and durable ✔ Great value --- ## Ideal For - Amateur radio users - Scanner enthusiasts - Handheld radio upgrades - Base antenna connections --- ## Straight Talking If you want to run a **proper antenna on your handheld**, this is the bit that makes it happen. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/so239-to-reverse-sma-female-adaptor-for-uv5r-wouxun-icom-tyt-fdc/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/so239-to-reverse-sma-female-adaptor-for-uv5r-wouxun-icom-tyt-fdc/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/so239-to-reverse-sma-female-adaptor-for-uv5r-wouxun-icom-tyt-fdc/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/so239-to-reverse-sma-female-adaptor-for-uv5r-wouxun-icom-tyt-fdc/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20so239%20to%20reverse%20SMA%20female%20adaptor&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fso239-to-reverse-sma-female-adaptor-for-uv5r-wouxun-icom-tyt-fdc%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/so239-to-reverse-sma-female-adaptor-for-uv5r-wouxun-icom-tyt-fdc/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/so239-to-reverse-sma-female-adaptor-for-uv5r-wouxun-icom-tyt-fdc/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/so239-to-reverse-sma-female-adaptor-for-uv5r-wouxun-icom-tyt-fdc/?share=telegram) - **Product categories:** RF Adaptors --- ### [Reverse SMA TO BNC female adaptor](https://cbradio.co.uk/product/reverse-sma-to-bnc-female-adaptor-for-boafeng-uv5r-wouxun-icom-tyt-fdc/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **SMA Female to BNC Female Adapter** allows you to **connect BNC antennas or coax cables** to handheld radios that use a **reverse SMA (SMA-F) connector**. Perfect for upgrading your setup with **better antennas, mag mounts, or base station cables**. --- ## 🔄 SMA to BNC Conversion ✔ Converts **SMA Female → BNC Female** ✔ Use BNC antennas or cables on SMA radios ✔ Quick and secure connection --- ## 📡 Expand Your Antenna Options - Connect to **external antennas** - Use **mag mounts or base station aerials** - Improve reception and transmit performance ✔ More flexibility --- ## 📻 Compatible Radios Works with many handhelds including: - Baofeng UV-5R - Wouxun - Quansheng - TYT - Icom ✔ Suitable for most SMA-based handheld radios --- ## 🔧 Easy to Use - Screw onto radio antenna port - Attach BNC antenna or cable - Ready to go ✔ No tools required --- ## 💪 Solid Construction ✔ Durable metal body ✔ Secure and reliable connection ✔ Built for regular use --- ## 🏠 Ideal for Multiple Setups - Handheld radio upgrades - Base station connections - Mobile antenna setups - Scanner use --- ## Key Features - SMA (female) to BNC (female) adapter - Compatible with handheld radios - Durable metal construction - Quick connect solution - Expands antenna compatibility --- ## Why Choose This Adapter? ✔ Simple and effective ✔ Improves antenna flexibility ✔ Strong and reliable ✔ Great value --- ## Ideal For - Amateur radio users - CB / scanner enthusiasts - Handheld radio upgrades - Base or mobile antenna use --- ## Straight Talking If you want to **use better antennas on your handheld**, this is the adapter you need. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/reverse-sma-to-bnc-female-adaptor-for-boafeng-uv5r-wouxun-icom-tyt-fdc/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/reverse-sma-to-bnc-female-adaptor-for-boafeng-uv5r-wouxun-icom-tyt-fdc/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/reverse-sma-to-bnc-female-adaptor-for-boafeng-uv5r-wouxun-icom-tyt-fdc/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/reverse-sma-to-bnc-female-adaptor-for-boafeng-uv5r-wouxun-icom-tyt-fdc/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Reverse%20SMA%20TO%20BNC%20female%20adaptor&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Freverse-sma-to-bnc-female-adaptor-for-boafeng-uv5r-wouxun-icom-tyt-fdc%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/reverse-sma-to-bnc-female-adaptor-for-boafeng-uv5r-wouxun-icom-tyt-fdc/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/reverse-sma-to-bnc-female-adaptor-for-boafeng-uv5r-wouxun-icom-tyt-fdc/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/reverse-sma-to-bnc-female-adaptor-for-boafeng-uv5r-wouxun-icom-tyt-fdc/?share=telegram) - **Product categories:** RF Adaptors --- ### [INNER Wheel Bearing SEAL Front / Rear Toyota Landcruiser 40 60 70 HDJ80 Series](https://cbradio.co.uk/product/inner-wheel-bearing-seal-front-rear-toyota-landcruiser-40-60-70-hdj80-series/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Toyota Land Cruiser Wheel Bearing Seal** is a **premium quality replacement seal** designed to **protect your axle and wheel bearings from oil leaks, dirt and water ingress**. A **direct-fit part** suitable for a wide range of classic and later Land Cruiser models. --- ## 🔧 Front & Rear – Left or Right ✔ Fits **front or rear axles** ✔ Suitable for **left or right side** ✔ One seal per side ➡️ **4 seals required** to complete both axles --- ## 🚙 Wide Model Compatibility ### 40 Series (07/1975-on) - BJ40, BJ42, FJ40, FJ43, FJ45, HJ45, HJ47 ### 50 Series (09/1975-on) - FJ55 ### 60 Series (1980–1989) - FJ60, FJ62, HJ60, HJ61 ### 70 / 75 / 78 / 79 Series (11/1984-on) - BJ70, BJ73, BJ74 - FJ70, FJ73, FJ75 - FZJ70, FZJ75, FZJ78, FZJ79 - HDJ78, HDJ79 - HJ75, HZJ73, HZJ75, HZJ79 - LJ70, RJ70, PZJ70, PZJ73, PZJ75 ### 80 Series - FJ80, FZJ80, HDZ80, HZJ80 ### 105 Series (1998-on – Non-IFS only) - FZJ105, HZJ105 --- ## 💪 Premium Quality Build ✔ Manufactured to OE standards ✔ Durable sealing materials ✔ Designed for long service life --- ## 🛢 Essential Protection - Prevents oil leaks - Keeps dirt and water out - Protects wheel bearings from damage ✔ Avoid costly repairs --- ## 🔧 Direct Replacement ✔ Exact fit ✔ No modifications required ✔ Straightforward installation --- ## 🚜 Built for Tough Use Ideal for: - Off-road vehicles - Work trucks - Overland builds - Daily drivers --- ## Key Features - Wheel bearing / axle seal - Front or rear fitment - Left or right compatible - Premium OE-quality replacement - Wide Land Cruiser compatibility --- ## Why Choose This Seal? ✔ Reliable sealing performance ✔ Covers multiple Land Cruiser models ✔ Cost-effective replacement ✔ Built for durability --- ## Ideal For - Land Cruiser owners - Mechanics and workshops - Off-road maintenance - Preventative servicing --- ## Straight Talking It’s a small part — but if it fails, it can take your bearings with it. Replace it properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/inner-wheel-bearing-seal-front-rear-toyota-landcruiser-40-60-70-hdj80-series/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/inner-wheel-bearing-seal-front-rear-toyota-landcruiser-40-60-70-hdj80-series/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/inner-wheel-bearing-seal-front-rear-toyota-landcruiser-40-60-70-hdj80-series/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/inner-wheel-bearing-seal-front-rear-toyota-landcruiser-40-60-70-hdj80-series/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20INNER%20Wheel%20Bearing%20SEAL%20Front%20%2F%20Rear%20%20Toyota%20Landcruiser%2040%2060%2070%20HDJ80%20Series&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Finner-wheel-bearing-seal-front-rear-toyota-landcruiser-40-60-70-hdj80-series%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/inner-wheel-bearing-seal-front-rear-toyota-landcruiser-40-60-70-hdj80-series/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/inner-wheel-bearing-seal-front-rear-toyota-landcruiser-40-60-70-hdj80-series/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/inner-wheel-bearing-seal-front-rear-toyota-landcruiser-40-60-70-hdj80-series/?share=telegram) - **Product categories:** Land Cruiser --- ### [Mini Springer CB antenna & PSM1 Rear Aerial Body mount 5M cable Defender 90](https://cbradio.co.uk/product/mini-springer-cb-antenna-psm1-rear-aerial-body-mount-5m-cable-defender-90/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PSM-1 Defender CB Antenna Kit** is a **complete, ready-to-fit rear-mounted CB setup** designed specifically for **Land Rover Defender 90**. This is the **classic Defender install you see everywhere** — giving you a **factory-style look with proven off-road performance**. --- ## 📦 Complete Kit – Everything Included ✔ PSM-1 rear body mount ✔ Mini Stinger springer antenna (black) ✔ **5m high quality RG58 coax cable (PL259 fitted)** ✔ Ready to install straight out the box --- ## 🚙 Designed for Defender 90 - 5 metre cable is **perfect length for Defender 90** - Runs cleanly from rear to dash - Easily reaches **Raptor dash or similar setups** ✔ No cutting or extending needed --- ## 📡 Proven Mini Stinger Performance - Frequency: **27–28 MHz** - Flexible springer design - Reliable signal and durability ✔ Built for real-world use --- ## 💪 Heavy Duty Rear Mount (PSM-1) - The mount used on **most Defenders** - Strong and stable in off-road conditions - **3/8″ stud fitting** for wide compatibility ✔ Built to stay put --- ## 🔌 High Quality Cable - Custom-made **low loss RG58** - **PL259 connector fitted** - Not cheap pre-made import cable ✔ Better performance and reliability --- ## 🇬🇧 Built with Quality in Mind ✔ UK-made springer antenna ✔ Proper materials used throughout ✔ Designed by people who actually use the gear --- ## 🔁 Also Available - Defender 110 version with **7m cable** - Mount-only and cable-only options --- ## 🛠 Easy Installation ✔ Step-by-step fitting instructions included ✔ Installed exactly how we would do it --- ## Key Features - Complete Defender CB antenna kit - Rear body mount (PSM-1) - Mini Stinger springer aerial - 5m RG58 coax with PL259 - Designed for Defender 90 --- ## Why Choose This Kit? ✔ Proper Defender-specific setup ✔ No cheap components ✔ Built for off-road use ✔ Clean, professional install --- ## Ideal For - Land Rover Defender 90 owners - Off-road and 4×4 setups - Work vehicles - First-time CB installs --- ## Straight Talking This is the **Defender CB setup done properly — no shortcuts, no cheap bits**. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-cb-antenna-psm1-rear-aerial-body-mount-5m-cable-defender-90/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-cb-antenna-psm1-rear-aerial-body-mount-5m-cable-defender-90/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-cb-antenna-psm1-rear-aerial-body-mount-5m-cable-defender-90/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-cb-antenna-psm1-rear-aerial-body-mount-5m-cable-defender-90/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20Springer%20CB%20antenna%20%26%20PSM1%20Rear%20Aerial%20Body%20mount%205M%20cable%20Defender%2090&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-cb-antenna-psm1-rear-aerial-body-mount-5m-cable-defender-90%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-cb-antenna-psm1-rear-aerial-body-mount-5m-cable-defender-90/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-cb-antenna-psm1-rear-aerial-body-mount-5m-cable-defender-90/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-cb-antenna-psm1-rear-aerial-body-mount-5m-cable-defender-90/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [3 / 5 Amp switch mode power pack cb radio power supply unit psu](https://cbradio.co.uk/product/3-5-amp-switch-mode-power-pack-cb-radio-power-supply-unit-psu/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **13.8V 3A/5A CB Power Supply** is a **compact switch mode PSU**, ideal for powering **CB and amateur radio equipment at home**. Designed for **reliable, stable output**, it’s perfect for **turning your mobile radio into a base station setup**. --- ## ⚡ Stable 13.8V Output ✔ Fixed **13.8V DC output** ✔ Designed for radio equipment ✔ Consistent and reliable power --- ## 🔋 3A Continuous / 5A Surge - **3 Amp continuous output** - **5 Amp peak (surge)** - Suitable for most standard CB radios ✔ Ideal for low to mid-power setups --- ## 🏠 Perfect for Home Base Use ✔ Converts mobile radios for home use ✔ Ideal for CB and small ham rigs ✔ Clean bench or shack setup --- ## 💪 Compact & Durable Design - White metal casing - Plastic front panel - Lightweight and space-saving ✔ Easy to fit anywhere --- ## 🔌 Front Panel Connections ✔ Simple and accessible output terminals ✔ Quick and easy wiring --- ## 🛡 Built-In Protection - **Current limiting protection** - Helps prevent overload damage ✔ Safe and reliable operation --- ## 📏 Compact Size - Dimensions: **110 x 80 x 200 mm** - Weight: **1 kg** ✔ Small footprint --- ## Key Features - 13.8V switch mode power supply - 3A continuous / 5A surge - Compact metal case - Front panel connectors - Ideal for CB radio use --- ## Technical Specifications - **Input Voltage:** 220V AC - **Output Voltage:** 13.8V DC - **Output Current:** 3A (5A surge) - **Ripple Noise:** 100mVp-p - **Protection:** Current limiting --- ## Why Choose This PSU? ✔ Reliable power for radio use ✔ Compact and easy to install ✔ Great value for home setups ✔ Simple and effective design --- ## Ideal For - Home CB radio setups - Small amateur radio rigs - Bench testing - Backup power unit --- ## Straight Talking If you’re running a radio at home, this gives you **clean, reliable power without overcomplicating things**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-5-amp-switch-mode-power-pack-cb-radio-power-supply-unit-psu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-5-amp-switch-mode-power-pack-cb-radio-power-supply-unit-psu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-5-amp-switch-mode-power-pack-cb-radio-power-supply-unit-psu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-5-amp-switch-mode-power-pack-cb-radio-power-supply-unit-psu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%203%20%2F%205%20Amp%20switch%20mode%20power%20pack%20cb%20radio%20power%20supply%20unit%20psu&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-5-amp-switch-mode-power-pack-cb-radio-power-supply-unit-psu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-5-amp-switch-mode-power-pack-cb-radio-power-supply-unit-psu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-5-amp-switch-mode-power-pack-cb-radio-power-supply-unit-psu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-5-amp-switch-mode-power-pack-cb-radio-power-supply-unit-psu/?share=telegram) - **Product categories:** Power Supplies and Inverters --- ### [S.A.C. Mux MZR 12 (12 Element. 9-11dB) Freeview Digital Aerial](https://cbradio.co.uk/product/s-a-c-mux-mzr-12-12-element-9-11db-freeview-digital-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **S.A.C. MZR 12 Freeview Aerial** is a **reliable, cost-effective digital TV aerial** designed for **strong Freeview reception across the UK**. With a **12-element design, solid construction, and built-in LTE filtering**, it’s ideal for both **home installations and professional contract work**. --- ## 📡 Strong Freeview Reception ✔ Gain: **9–11.5 dB** ✔ Designed for **stable signal performance** ✔ Suitable for most signal areas --- ## 📶 Wideband Coverage - Frequency: **470–786 MHz** - Channels: **21–60** - Covers full UK Freeview range ✔ One aerial for all channels --- ## 📱 LTE / 4G Interference Protection ✔ Built-in filtering against mobile signal interference ✔ Cleaner TV reception ✔ Reduced pixelation and dropouts --- ## 🔧 12 Element High Performance Design - Directional aerial for improved signal focus - **Front-to-back ratio: 10–20 dB** - Reduced interference from behind ✔ Better overall reception quality --- ## 🏠 Ideal for Home & Trade Use - Perfect for domestic installations - Suitable for contractors and installers - Reliable everyday performance --- ## 🔌 F-Type Balun Connection - Standard **F-connector input** - Easy connection to coax cable - Secure and stable signal transfer --- ## 💪 Durable Construction - Rugged reflectors and rear deflectors - Built for outdoor use - Long-lasting performance --- ## 📏 Compact Size - Length: **850 mm** - Easy to mount and position --- ## Key Features - 12 element digital TV aerial - Wideband Freeview coverage - LTE/4G interference protection - F-type connector - Durable outdoor design --- ## Technical Specifications - **Frequency:** 470–786 MHz - **Channels:** 21–60 - **Gain:** 9–11.5 dB - **Impedance:** 75 Ohm - **Beam Width:** H 44° / V 49° - **Length:** 850 mm --- ## Why Choose the MZR 12? ✔ Great value for money ✔ Reliable performance ✔ Easy installation ✔ Suitable for most UK locations --- ## Ideal For - Home Freeview setups - Replacement aerials - Trade and contract installs - General TV reception --- ## Straight Talking If you want a **solid Freeview aerial that does the job without overspending**, this is it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/s-a-c-mux-mzr-12-12-element-9-11db-freeview-digital-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/s-a-c-mux-mzr-12-12-element-9-11db-freeview-digital-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/s-a-c-mux-mzr-12-12-element-9-11db-freeview-digital-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/s-a-c-mux-mzr-12-12-element-9-11db-freeview-digital-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20S.A.C.%20Mux%20MZR%2012%20%2812%20Element.%209-11dB%29%20Freeview%20Digital%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fs-a-c-mux-mzr-12-12-element-9-11db-freeview-digital-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/s-a-c-mux-mzr-12-12-element-9-11db-freeview-digital-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/s-a-c-mux-mzr-12-12-element-9-11db-freeview-digital-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/s-a-c-mux-mzr-12-12-element-9-11db-freeview-digital-aerial/?share=telegram) - **Product categories:** TV aerials --- ### [Mini Springer Tornado Stinger CB Antenna + Flat Bar Mirror mount Kit CB Aerial](https://cbradio.co.uk/product/mini-springer-tornado-stinger-cb-antenna-flat-bar-mirror-mount-kit-cb-aerial/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini Tornado Stinger CB Antenna Kit** is a **complete, ready-to-install CB aerial setup**, combining one of the **most popular springer antennas on the market** with a **strong mirror mount and pre-wired cable**. Perfect for anyone wanting a **reliable, no-fuss installation at a great price**. --- ## 📦 Complete CB Aerial Kit ✔ Mini Tornado Stinger antenna ✔ Flat bar mirror mount ✔ **4m RG58 coax cable with PL259 fitted** ✔ Everything you need in one kit --- ## 📡 Proven Springer Performance - Frequency: **27–28 MHz** - **VSWR: 1.5:1 or better** - Strong and consistent signal ✔ Trusted by CB users everywhere --- ## 💪 Heavy Duty Flexible Design - Spring-loaded base - Absorbs knocks and vibration - Ideal for trucks, 4x4s and work vehicles ✔ Built for real-world use --- ## 🚛 Mirror Mount Included - Flat bar clamp mount - Fits mirror arms, roof bars and racks - No drilling required ✔ Quick and solid install --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Handles standard and high-power radios --- ## 🎨 Colour Options Available ✔ Supplied in **black as standard** ✔ Other colours available — specify at checkout --- ## 📏 Ideal Size - Length: **90 cm** - Great balance of performance and practicality --- ## 🔌 Ready Wired - **4 metre RG58 coax cable** - **PL259 connector fitted** - Direct connection to your radio ✔ No extra parts needed --- ## Key Features - Complete CB antenna kit - Mini Stinger springer aerial - Mirror mount included - RG58 coax with PL259 - Flexible heavy-duty design --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 90 cm - **VSWR:** ≤ 1.5:1 - **Power:** 1000W - **Fitting:** 3/8″ thread --- ## Why Choose This Kit? ✔ Everything included ✔ Tough and reliable antenna ✔ Easy installation ✔ Excellent value --- ## Ideal For - Truck drivers - 4×4 and off-road vehicles - Vans and work vehicles - First-time CB users --- ## Straight Talking If you want a **proper CB aerial setup without messing about**, this is it. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) Moonraker 2-Way Rail Mount Type: Aluminium flat bar mirror mount - Fitting: standard 3/8th fitting - Coax: 4 metres RG58 - Connection: PL259 plug fitted ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-springer-tornado-stinger-cb-antenna-flat-bar-mirror-mount-kit-cb-aerial/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-springer-tornado-stinger-cb-antenna-flat-bar-mirror-mount-kit-cb-aerial/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-springer-tornado-stinger-cb-antenna-flat-bar-mirror-mount-kit-cb-aerial/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-springer-tornado-stinger-cb-antenna-flat-bar-mirror-mount-kit-cb-aerial/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20Springer%20Tornado%20Stinger%20CB%20Antenna%20%2B%20Flat%20Bar%20%20Mirror%20mount%20Kit%20CB%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-springer-tornado-stinger-cb-antenna-flat-bar-mirror-mount-kit-cb-aerial%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-springer-tornado-stinger-cb-antenna-flat-bar-mirror-mount-kit-cb-aerial/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-springer-tornado-stinger-cb-antenna-flat-bar-mirror-mount-kit-cb-aerial/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-springer-tornado-stinger-cb-antenna-flat-bar-mirror-mount-kit-cb-aerial/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [Front / Rear INNER Wheel Bearing SEAL Toyota Landcruiser 40 60 70 HDJ80 Series](https://cbradio.co.uk/product/front-rear-inner-wheel-bearing-seal-toyota-landcruiser-40-60-70-hdj80-series/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Toyota Land Cruiser Wheel Bearing Seal** is a **premium quality replacement seal** designed to protect your axle and wheel bearings from **oil leaks, dirt and contamination**. Suitable for a wide range of **classic and modern Land Cruiser models**, this is a **direct replacement part** you can rely on. --- ## 🔧 Front & Rear Fitment ✔ Fits **front or rear axles** ✔ Suitable for **left or right side** ✔ One seal per side ➡️ **4 seals required** to complete both axles --- ## 🚙 Wide Vehicle Compatibility Fits: ### 40 Series (1975-on) - BJ40, BJ42, FJ40, FJ43, FJ45, HJ45, HJ47 ### 50 Series (1975-on) - FJ55 ### 60 Series (1980–1989) - FJ60, FJ62, HJ60, HJ61 ### 70 / 75 / 78 / 79 Series (1984-on) - BJ70, BJ73, BJ74 - FJ70, FJ73, FJ75 - FZJ70, FZJ75, FZJ78, FZJ79 - HDJ78, HDJ79 - HJ75, HZJ73, HZJ75, HZJ79 - LJ70, RJ70, PZJ70, PZJ73, PZJ75 ### 80 Series - FJ80, FZJ80, HDZ80, HZJ80 ### 105 Series (Non-IFS models) - FZJ105, HZJ105 --- ## 💪 Premium Quality Construction ✔ Designed to OE standards ✔ Durable sealing material ✔ Built to withstand harsh conditions --- ## 🛢 Essential Protection - Keeps oil where it should be - Prevents dirt and water ingress - Protects bearings from premature wear ✔ Avoid costly repairs --- ## 🔧 Direct Replacement ✔ Easy fitment ✔ Matches original specifications ✔ No modifications required --- ## 🚜 Built for Tough Use Ideal for: - Off-road vehicles - Work trucks - Overland builds - Daily drivers --- ## Key Features - Wheel bearing / axle seal - Front or rear fitment - Left or right side compatible - Premium quality construction - Wide Land Cruiser compatibility --- ## Why Choose This Seal? ✔ Reliable sealing performance ✔ Broad model compatibility ✔ Cost-effective OE replacement ✔ Built for durability --- ## Ideal For - Land Cruiser owners - Mechanics and workshops - Off-road vehicle maintenance - Preventative servicing --- ## Straight Talking It’s a small part — but if it fails, it can lead to **big problems**. Replace it properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/front-rear-inner-wheel-bearing-seal-toyota-landcruiser-40-60-70-hdj80-series/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/front-rear-inner-wheel-bearing-seal-toyota-landcruiser-40-60-70-hdj80-series/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/front-rear-inner-wheel-bearing-seal-toyota-landcruiser-40-60-70-hdj80-series/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/front-rear-inner-wheel-bearing-seal-toyota-landcruiser-40-60-70-hdj80-series/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Front%20%2F%20Rear%20INNER%20Wheel%20Bearing%20SEAL%20Toyota%20Landcruiser%2040%2060%2070%20HDJ80%20Series&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ffront-rear-inner-wheel-bearing-seal-toyota-landcruiser-40-60-70-hdj80-series%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/front-rear-inner-wheel-bearing-seal-toyota-landcruiser-40-60-70-hdj80-series/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/front-rear-inner-wheel-bearing-seal-toyota-landcruiser-40-60-70-hdj80-series/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/front-rear-inner-wheel-bearing-seal-toyota-landcruiser-40-60-70-hdj80-series/?share=telegram) - **Product categories:** Land Cruiser --- ### [mini Springer CB Aerial Flat Bar Mirror mount kit](https://cbradio.co.uk/product/90cm-tornado-stinger-springer-cb-aerial-antenna-flat-bar-mirror-mount-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Tornado Mini Stinger CB Antenna Kit** is a **complete CB aerial setup**, giving you everything you need for a **strong, reliable installation straight out of the box**. Featuring the **popular Mini Stinger springer antenna**, combined with a **heavy-duty mirror mount and coax cable**, this kit is built for real-world use. --- ## 📦 Complete CB Aerial Kit ✔ Mini Tornado Stinger antenna ✔ Flat bar mirror mount ✔ **4m RG58 coax cable with PL259 fitted** ✔ Ready to install and go --- ## 📡 Proven Stinger Antenna Performance - Frequency: **27–28 MHz** - **VSWR: 1.5:1 or better** - Strong and consistent signal ✔ One of the most popular CB antennas --- ## 💪 Heavy Duty Springer Design - Flexible coil base - Handles knocks, branches and vibration - Ideal for trucks, 4x4s and work vehicles ✔ Built to last --- ## 🚛 Mirror Mount Included - Flat bar clamp mount - Fits mirror arms, bars and racks - No drilling required ✔ Quick and secure fitting --- ## ⚡ High Power Handling ✔ Rated up to **1000 Watts** ✔ Suitable for standard and high-power setups --- ## 📏 Practical Antenna Size - Length: **90 cm** - Great balance of performance and usability - Not too tall, not too small --- ## 🔌 Ready Wired - **4 metre RG58 coax cable** - **PL259 connector fitted** - Easy connection to your radio ✔ No extra parts needed --- ## Key Features - Complete CB antenna kit - Mini Stinger springer aerial - Mirror mount included - RG58 coax cable with PL259 - Heavy duty flexible design --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 90 cm - **VSWR:** ≤ 1.5:1 - **Power:** 1000W - **Fitting:** 3/8″ thread --- ## Why Choose This Kit? ✔ Everything included in one package ✔ Tough, reliable antenna design ✔ Easy installation ✔ Excellent value for money --- ## Ideal For - Truck drivers - 4×4 and off-road vehicles - Vans and work vehicles - First-time CB users --- ## Straight Talking This is a **proper no-nonsense CB setup** — fit it, tune it, and you’re on air. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) Moonraker 2-Way Rail Mount Type: Aluminium flat bar mirror mount - Fitting: standard 3/8th fitting - Coax: 4 metres RG58 - Connection: PL259 plug fitted ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/90cm-tornado-stinger-springer-cb-aerial-antenna-flat-bar-mirror-mount-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/90cm-tornado-stinger-springer-cb-aerial-antenna-flat-bar-mirror-mount-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/90cm-tornado-stinger-springer-cb-aerial-antenna-flat-bar-mirror-mount-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/90cm-tornado-stinger-springer-cb-aerial-antenna-flat-bar-mirror-mount-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mini%20Springer%20CB%20Aerial%20Flat%20Bar%20Mirror%20mount%20kit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F90cm-tornado-stinger-springer-cb-aerial-antenna-flat-bar-mirror-mount-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/90cm-tornado-stinger-springer-cb-aerial-antenna-flat-bar-mirror-mount-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/90cm-tornado-stinger-springer-cb-aerial-antenna-flat-bar-mirror-mount-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/90cm-tornado-stinger-springer-cb-aerial-antenna-flat-bar-mirror-mount-kit/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [CB Radio DIN in dash Mount PRESIDENT Harry 3 Johnny Teddy Tommy Truman Legend](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-harry-3-johnny-teddy-tommy-truman-legend/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **CB Radio DIN Mount Cage** is a **professional all-metal in-dash mounting solution**, designed to fit compatible CB radios neatly into a **standard car stereo DIN slot**. If you want a **clean, factory-style installation**, this is the proper way to do it. --- ## 🚗 Clean In-Dash Installation ✔ Fits directly into **standard DIN slots** ✔ Hides wiring and brackets ✔ Gives a **factory fitted look** --- ## 💪 Heavy Duty Metal Construction - Strong all-metal casing - Durable and long-lasting - Far superior to plastic versions ✔ Built properly — not cheap imitation --- ## 📏 Compatible Radio Models Fits: - President Teddy - President Truman - President Harry III - President Tommy - President Johnny III - President Legend I - President Jimmi III --- ## 📐 Slot Dimensions - **125mm x 40.5mm** - Designed for compatible CB radios --- ## ⚠️ Important Notes - **This listing is for the DIN mount only** - **CB radio NOT included** - When fitted, the radio’s internal speaker may be covered ➡️ External speaker recommended --- ## 🔧 Easy Installation - Slide into DIN slot - Secure in place - Insert compatible CB radio ✔ Simple and effective --- ## 🎯 Professional Finish ✔ No hanging brackets ✔ No cluttered installs ✔ Clean dashboard appearance --- ## Key Features - DIN in-dash CB radio mount - Heavy-duty metal construction - Fits multiple President models - Clean professional install - Standard DIN size --- ## Why Choose This DIN Mount? ✔ Proper in-dash installation ✔ Strong and durable build ✔ Improves vehicle interior look ✔ Designed for specific radios --- ## Ideal For - Clean dashboard builds - Professional installs - Car and van conversions - CB users wanting factory look --- ## Straight Talking If you don’t want your CB hanging under the dash, this is **how you do it properly**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-harry-3-johnny-teddy-tommy-truman-legend/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-harry-3-johnny-teddy-tommy-truman-legend/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-harry-3-johnny-teddy-tommy-truman-legend/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-harry-3-johnny-teddy-tommy-truman-legend/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20DIN%20in%20dash%20Mount%20PRESIDENT%20Harry%203%20Johnny%20Teddy%20Tommy%20Truman%20Legend&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-din-in-dash-mount-president-harry-3-johnny-teddy-tommy-truman-legend%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-harry-3-johnny-teddy-tommy-truman-legend/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-harry-3-johnny-teddy-tommy-truman-legend/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-harry-3-johnny-teddy-tommy-truman-legend/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [mb-800 hatchback boot mount cb ham](https://cbradio.co.uk/product/mb-800-hatchback-boot-mount-cb-aerial-ham-antenna-bracket/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **MB-800 Heavy Duty Hatch Mount** is a **robust, adjustable mount** designed for securely fitting antennas to **vehicle boot lids or hatchbacks**. Built for strength and flexibility, it’s ideal for **amateur radio and CB installations** where a solid mounting solution is essential. --- ## 💪 Heavy Duty Construction ✔ Strong, durable metal build ✔ Designed for long-term use ✔ Handles larger antennas with ease ✔ Built for serious installs --- ## 🔧 Fully Adjustable Design - Adjustable angle for correct antenna alignment - Ensures optimal signal performance - Fits a wide range of vehicle shapes ✔ Get the antenna upright and working properly --- ## 🚗 Ideal Hatch / Boot Mount Solution - Clamps securely to boot or hatch edge - No drilling required - Clean, professional installation --- ## 📡 Designed for Amateur Radio Antennas Perfect for antennas such as: - Diamond NR770R/H - Diamond SG7500 - Diamond SG7900 ✔ Supports popular dual-band mobile antennas --- ## 🔌 SO239 Cable Compatibility - Designed to work with **optional SO239 coax cables** - Choose cable length to suit your installation - Compatible with standard PL259 connections --- ## 🌧 Built for Outdoor Use ✔ Weather-resistant design ✔ Secure and stable in all conditions ✔ Ideal for daily driving --- ## 🔧 Easy Installation 1. Clamp onto boot or hatch edge 2. Adjust angle 3. Fit antenna and cable 4. Connect to radio ✔ No specialist tools required --- ## Key Features - Heavy-duty hatch / boot mount - Adjustable angle design - No-drill installation - Compatible with SO239 cables - Suitable for CB and ham antennas --- ## Why Choose the MB-800? ✔ Stronger than basic mounts ✔ Adjustable for perfect positioning ✔ Works with larger antennas ✔ Professional installation look --- ## Ideal For - Amateur radio operators - Dual-band antenna users - Hatchback and estate cars - Mobile radio installations --- ## Straight Talking If you’re running a proper antenna, you need a **proper mount — this is one of them**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mb-800-hatchback-boot-mount-cb-aerial-ham-antenna-bracket/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mb-800-hatchback-boot-mount-cb-aerial-ham-antenna-bracket/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mb-800-hatchback-boot-mount-cb-aerial-ham-antenna-bracket/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mb-800-hatchback-boot-mount-cb-aerial-ham-antenna-bracket/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mb-800%20hatchback%20boot%20mount%20cb%20ham&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmb-800-hatchback-boot-mount-cb-aerial-ham-antenna-bracket%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mb-800-hatchback-boot-mount-cb-aerial-ham-antenna-bracket/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mb-800-hatchback-boot-mount-cb-aerial-ham-antenna-bracket/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mb-800-hatchback-boot-mount-cb-aerial-ham-antenna-bracket/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [mini8 patch lead 3.65m 12' 50 Ohms rg8 cable](https://cbradio.co.uk/product/mini8-patch-lead-3-65m-12-50-ohms-rg8-cable-2-pl259-ham-cb-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini-8 RG8 Patch Lead 3.65m** is a **high-quality, low-loss coax cable** designed for **CB and amateur radio setups** where reliability and signal quality matter. Custom made with **soldered PL259 connectors and heavy shielding**, this is a step up from standard patch leads. --- ## 📡 Low Loss Performance ✔ Better performance than standard RG58 ✔ Ideal for short to medium cable runs ✔ Maintains strong signal quality --- ## 🔌 Ready to Use - **3.65 metres (12ft)** length - **2x PL259 connectors fitted** - Fully assembled and tested ✔ Plug straight into your setup --- ## 💪 High Quality Construction - **Mini-8 (RG8) coax cable** - Approx. **95% shielding coverage** - Reduces interference and signal loss ✔ Clean, stable transmission --- ## 🔧 Soldered Connectors - Properly **soldered PL259 plugs** - Strong and reliable connections - Better than crimped alternatives ✔ Built to last --- ## ⚙️ Ideal Patch Lead Length - Perfect for **radio → SWR meter → antenna setups** - Great for **mobile or base station use** - No excess cable clutter --- ## 📶 Wide Compatibility Suitable for: - CB radios - Ham / amateur radios - SWR meters - Antenna systems --- ## Key Features - Mini-8 (RG8) coax cable - 3.65m / 12ft length - 50 Ohm impedance - 2x PL259 connectors - High shielding coverage --- ## Technical Specifications - **Type:** Mini-8 / RG8 - **Length:** 3.65 metres (12ft) - **Impedance:** 50 Ohms - **Shielding:** ~95% - **Connectors:** 2x PL259 (soldered) --- ## Why Choose This Patch Lead? ✔ Lower loss than thinner cables ✔ Strong, soldered connectors ✔ Ideal for clean installations ✔ Reliable signal performance --- ## Ideal For - CB radio installs - Amateur radio setups - SWR meter connections - Mobile and base stations --- ## Straight Talking If you want a **proper patch lead that won’t let your signal down**, this is the one to use. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini8-patch-lead-3-65m-12-50-ohms-rg8-cable-2-pl259-ham-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini8-patch-lead-3-65m-12-50-ohms-rg8-cable-2-pl259-ham-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini8-patch-lead-3-65m-12-50-ohms-rg8-cable-2-pl259-ham-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini8-patch-lead-3-65m-12-50-ohms-rg8-cable-2-pl259-ham-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20mini8%20patch%20lead%203.65m%2012%27%20%2050%20Ohms%20rg8%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini8-patch-lead-3-65m-12-50-ohms-rg8-cable-2-pl259-ham-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini8-patch-lead-3-65m-12-50-ohms-rg8-cable-2-pl259-ham-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini8-patch-lead-3-65m-12-50-ohms-rg8-cable-2-pl259-ham-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini8-patch-lead-3-65m-12-50-ohms-rg8-cable-2-pl259-ham-cb-radio/?share=telegram) - **Product categories:** Patch Leads --- ### [N-type Female TO BNC ADAPTER antenna adaptor for scanner HAM Radio](https://cbradio.co.uk/product/n-type-female-to-bnc-adapter-antenna-adaptor-for-scanner-ham-radio/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **N-Type Female to BNC Male Adapter** is a **compact and reliable RF connector**, designed to **convert N-type connections to BNC** quickly and easily. Perfect for adapting antennas, cables or radio equipment without needing to replace your existing setup. --- ## 🔄 Simple N to BNC Conversion ✔ Converts **N-type female → BNC male** ✔ Allows mixed connector systems to work together ✔ Ideal for quick setup changes --- ## 📡 Wide Compatibility Works with: - Scanner radios - Amateur (ham) radio equipment - Antennas and coax systems - Test and RF equipment --- ## ⚡ Reliable Signal Connection - Maintains strong signal transfer - Secure connection fit - Suitable for RF applications --- ## 🔧 Plug & Play Design ✔ No tools required ✔ Quick installation ✔ Easy to swap between setups --- ## 💪 Durable Construction - Solid metal body - Built for repeated use - Long-lasting performance --- ## 📏 Compact & Portable - Small and lightweight - Easy to keep in toolkits or radio bags - Ideal for field use --- ## Key Features - N-type female to BNC male adaptor - RF signal compatible - Solid metal construction - Plug and play - Compact design --- ## Why Choose This Adapter? ✔ Saves replacing cables or antennas ✔ Quick and simple solution ✔ Reliable RF connection ✔ Essential for mixed setups --- ## Ideal For - Scanner users - Amateur radio operators - RF testing setups - Portable radio kits --- ## Straight Talking It’s a small part — but it can **save you a lot of hassle** when connectors don’t match. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/n-type-female-to-bnc-adapter-antenna-adaptor-for-scanner-ham-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/n-type-female-to-bnc-adapter-antenna-adaptor-for-scanner-ham-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/n-type-female-to-bnc-adapter-antenna-adaptor-for-scanner-ham-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/n-type-female-to-bnc-adapter-antenna-adaptor-for-scanner-ham-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20N-type%20Female%20TO%20BNC%20ADAPTER%20antenna%20adaptor%20for%20scanner%20HAM%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fn-type-female-to-bnc-adapter-antenna-adaptor-for-scanner-ham-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/n-type-female-to-bnc-adapter-antenna-adaptor-for-scanner-ham-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/n-type-female-to-bnc-adapter-antenna-adaptor-for-scanner-ham-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/n-type-female-to-bnc-adapter-antenna-adaptor-for-scanner-ham-radio/?share=telegram) - **Product categories:** RF Adaptors --- ### [micro CB Radio Kit Mirror Mount and Springer](https://cbradio.co.uk/product/anytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Moonraker Anytone Micro CB Radio Kit** is a **complete, ready-to-go CB setup**, perfect for anyone wanting a **simple install with solid performance**. Featuring an **ultra-compact CB radio, Mini Springer antenna and heavy-duty mirror mount**, this kit is designed to **fit where other radios won’t**. --- ## 📦 Complete CB Starter Kit Includes everything you need: ✔ Ultra-compact CB radio ✔ Mini Springer CB antenna ✔ Heavy-duty mirror / roof bar clamp mount ✔ Get on air straight away --- ## 📡 UK & EU Multi-Standard ✔ **80 channels (UK + EU)** ✔ AM / FM operation ✔ Ideal for travel across Europe --- ## 📏 Ultra Compact Radio Design - Size: **10.2 x 10 x 2.5 cm** - Fits tight spaces and modern vehicles - Easy to hide behind dash or mount discreetly ✔ Perfect for space-limited installs --- ## 📶 Reliable Springer Antenna - Mini Springer aerial included - Flexible and durable coil design - Built for real-world use ✔ Great everyday performance --- ## 🔧 Heavy Duty Mirror Mount - Clamp-style mount - Fits mirror arms, roof bars, racks - No drilling required ✔ Quick and solid installation --- ## 🎛 Essential Features Built In - **Manual & Auto Squelch (ASQ)** - **RF Gain control** - **Scan function** - **Emergency channels (9/19)** - **Keypad lock** ✔ Everything you need — nothing you don’t --- ## 🔊 Expandable Setup - External speaker jack - Improve audio in noisy environments --- ## ⚡ 4W Output Power ✔ Legal CB output ✔ Reliable communication range --- ## Key Features - Complete CB radio kit - Ultra compact transceiver - Mini Springer antenna - Mirror mount included - 80 channel UK/EU operation --- ## Technical Specifications (Radio) - **Channels:** 80 (UK/EU) - **Modes:** AM/FM - **Power:** 4W - **Dimensions:** 10.2 x 10 x 2.5 cm --- ## Why Choose This Kit? ✔ Everything included in one package ✔ Ideal for beginners and quick installs ✔ Compact and easy to fit ✔ Durable antenna and mount --- ## Ideal For - Truck drivers - 4×4 and off-road users - Vans and work vehicles - First-time CB users --- ## Straight Talking If you want a **simple CB setup that just works**, this kit takes all the guesswork out of it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20micro%20CB%20Radio%20Kit%20Mirror%20Mount%20and%20Springer&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-micro-cb-radio-kit-am-fm-uk-eu-80-channel-mirror-mount-and-springer/?share=telegram) - **Product categories:** CB Radio Starter Kits --- ### [Jopix Ulises CB Radio AM FM UK EU](https://cbradio.co.uk/product/cb-radio-jopix-ulises-crt-2000-multistandard-am-fm-with-colour-display-uk-eu/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Jopix Ulises CB Radio** (also known as CRT-2000 / Anytone Apollo) is a **compact but powerful multi-standard CB radio**, packed with features usually found on much higher-end rigs. With its **large colour display, advanced filtering, and programmable functions**, this is a serious upgrade for any CB setup. --- ## 🌍 Multi-Standard European Coverage ✔ Covers **UK / EU / CE / PL / DE / I2 bands** ✔ 40 channels AM/FM ✔ Ideal for travel across Europe --- ## 🎨 Large Colour Multifunction Display - Bright, easy-to-read screen - Displays **channel, frequency, voltage, RX/TX levels** - Modern interface with clear information ✔ A big step up from basic displays --- ## 🎯 Advanced Selective Calling (CTCSS / DCS) - **38 CTCSS / 104 DCS tones** - Enables quieter, more selective communication - Reduces unwanted chatter ✔ Great for private or group use --- ## 🔧 Packed with High-End Features - **RF Gain:** Off / Auto + 10 levels - **ASQ / Manual Squelch** - **Dual Watch** - **Scan function** - **Time-Out Timer (TOT)** - **NB / HI-CUT filters** ✔ Full control over your signal --- ## 🎤 Smart Microphone Control - Up/Down channel selection - Easy operation while driving - Quick access to key functions --- ## 🔌 Dual Voltage 12V / 24V ✔ Suitable for **cars, vans and trucks** ✔ No additional converter needed --- ## ⚡ Additional Advanced Functions - **DTMF encoder** (advanced signalling) - **SWR test function** - **4 memory channels** - **Customisable function keys (PF1–PF6)** - Personalised menu layout --- ## 💻 Software Programmable - Customise features via software (optional cable required) - Can be programmed for extended use (where legal) --- ## 🔊 External Speaker Support - 3.5mm jack for external speaker - Improve audio clarity in noisy environments --- ## Key Features - Multi-standard CB radio - AM / FM modes - Large colour display - CTCSS / DCS selective calling - RF gain and advanced filtering - Dual voltage 12/24V --- ## Technical Specifications - **Power Output:** 4W AM / FM - **Channels:** 40 - **Voltage:** 12V / 24V - **Size:** 122 x 165 x 35 mm - **Weight:** 480g --- ## Why Choose the Jopix Ulises? ✔ Compact but feature-rich ✔ Modern display and interface ✔ Advanced filtering and control ✔ Ideal for both casual and serious users --- ## Ideal For - Truck and van drivers - Advanced CB users - European travellers - Users wanting more than a basic radio --- ## Straight Talking This isn’t a basic CB — it’s a **small radio with big capability**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-jopix-ulises-crt-2000-multistandard-am-fm-with-colour-display-uk-eu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-jopix-ulises-crt-2000-multistandard-am-fm-with-colour-display-uk-eu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-jopix-ulises-crt-2000-multistandard-am-fm-with-colour-display-uk-eu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-jopix-ulises-crt-2000-multistandard-am-fm-with-colour-display-uk-eu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Jopix%20Ulises%20CB%20Radio%20AM%20FM%20UK%20EU&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-jopix-ulises-crt-2000-multistandard-am-fm-with-colour-display-uk-eu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-jopix-ulises-crt-2000-multistandard-am-fm-with-colour-display-uk-eu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-jopix-ulises-crt-2000-multistandard-am-fm-with-colour-display-uk-eu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-jopix-ulises-crt-2000-multistandard-am-fm-with-colour-display-uk-eu/?share=telegram) - **Product categories:** Jopix --- ### [G5RV-HSH copper Half Size G5RV Antenna](https://cbradio.co.uk/product/g5rv-hsh-hard-drawn-half-size-g5rv-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Half Size G5RV Antenna** is a **compact version of the classic G5RV**, designed for operators who want **multi-band HF performance but have limited space**. While still a **compromise antenna**, it offers **reliable all-round performance across key HF bands** when used with an external tuner. --- ## 🌍 Multi-Band HF Coverage ✔ Covers: **10 / 15 / 20 / 40 metres** ✔ Resonant on **10m band** ✔ Multi-band use with external ATU --- ## 📏 Compact Size – Ideal for Smaller Spaces - **15.5 metre wire length** - Half the size of a full G5RV - Easier to install in gardens and restricted areas ✔ Perfect where space is limited --- ## 📡 Proven G5RV Design - Widely used and trusted design - Balanced performance across bands - Ideal general-purpose HF antenna --- ## ⚡ High Power Capability ✔ Handles up to **500 Watts** ✔ Suitable for most base station setups --- ## 🔌 Ribbon Feeder Included - **4.6 metre 300 Ohm ribbon feeder** - High-quality USA-made line - Supports multi-band operation --- ## 🔗 Coax Ready Connection - **SO239 feedpoint socket** - Connect via PL259 coax - Easy integration with your setup ✔ No full ladder line run required --- ## ⚠️ Important Note Best used with an **external antenna tuner (ATU)**. Some internal tuners may struggle to match all bands. --- ## 🏡 Flexible Installation Install as: - Inverted “V” - Flat-top dipole - Sloper ✔ Works in most small gardens --- ## Key Features - Half size G5RV antenna - Multi-band HF coverage (10–40m) - Compact 15.5m wire length - 300 Ohm ribbon feeder - SO239 coax connection - 500W power handling --- ## Technical Specifications - **Type:** Half size G5RV (copper version) - **Frequency Bands:** 10–40 metres - **Wire Length:** 15.5 metres - **Feeder Length:** 4.6 metres (300 Ohm ribbon) - **Power Handling:** 500W - **Connector:** SO239 --- ## Why Choose Half Size G5RV? ✔ Fits smaller spaces ✔ Covers multiple HF bands ✔ Easy to install ✔ Proven design --- ## Ideal For - Smaller gardens - Portable setups - Amateur radio base stations - Users limited on space --- ## Straight Talking If you don’t have room for a full G5RV, this gives you **a very usable multi-band antenna in half the space**. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/g5rv-hsh-hard-drawn-half-size-g5rv-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/g5rv-hsh-hard-drawn-half-size-g5rv-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/g5rv-hsh-hard-drawn-half-size-g5rv-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/g5rv-hsh-hard-drawn-half-size-g5rv-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20G5RV-HSH%20copper%20Half%20Size%20G5RV%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fg5rv-hsh-hard-drawn-half-size-g5rv-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/g5rv-hsh-hard-drawn-half-size-g5rv-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/g5rv-hsh-hard-drawn-half-size-g5rv-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/g5rv-hsh-hard-drawn-half-size-g5rv-antenna/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Mini half breed FM27 base loaded CB Aerial](https://cbradio.co.uk/product/mini-half-breed-fm27-base-loaded-mobile-cb-aerial-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Mini FM27 CB Mobile Antenna** is a **compact, base-loaded aerial** designed for drivers who want **reliable CB performance without a large antenna**. At just **75cm long**, it offers a great balance between **size, practicality and performance**. --- ## 📡 Reliable CB Performance ✔ Frequency: **27–28 MHz** ✔ **VSWR: approx. 1.5:1** ✔ Suitable for standard CB communication --- ## 🚗 Compact & Practical Size - Length: **75 cm** - Easier to live with than longer antennas - Ideal for daily driving ✔ Less intrusive, more convenient --- ## ⚡ High Power Handling ✔ Rated up to **500 Watts** ✔ Handles standard and higher-powered setups --- ## 🔧 Base Loaded Design - Efficient coil design - Maintains performance in a shorter antenna - Durable construction ✔ Good performance for its size --- ## 🔌 Standard 3/8″ Fitting - Fits most **3/8″ antenna mounts** - Compatible with mirror mounts, mag mounts and brackets ✔ Easy to install --- ## 🌦 Built for Everyday Use ✔ Suitable for cars, vans and 4x4s ✔ Strong and practical design ✔ Handles daily wear and tear --- ## Key Features - Compact CB antenna - Base loaded design - 75cm length - 3/8″ mounting thread - 500W power handling --- ## Technical Specifications - **Frequency:** 27–28 MHz - **Length:** 75 cm - **VSWR:** ~1.5:1 - **Power Rating:** 500W - **Fitting:** 3/8″ thread --- ## Why Choose the Mini FM27? ✔ Compact and easy to live with ✔ Strong everyday performance ✔ Simple installation ✔ Great value antenna --- ## Ideal For - Cars and vans - Daily drivers - New CB users - Discreet installations --- ## Straight Talking If you don’t want a big whip on your roof, this gives you **solid CB performance in a much more manageable size**. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mini-half-breed-fm27-base-loaded-mobile-cb-aerial-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mini-half-breed-fm27-base-loaded-mobile-cb-aerial-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mini-half-breed-fm27-base-loaded-mobile-cb-aerial-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mini-half-breed-fm27-base-loaded-mobile-cb-aerial-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mini%20half%20breed%20FM27%20base%20loaded%20CB%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmini-half-breed-fm27-base-loaded-mobile-cb-aerial-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mini-half-breed-fm27-base-loaded-mobile-cb-aerial-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mini-half-breed-fm27-base-loaded-mobile-cb-aerial-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mini-half-breed-fm27-base-loaded-mobile-cb-aerial-antenna/?share=telegram) - **Product categories:** CB Aerials --- ### [ZL7-70 70cm 7 element special Yagi Antenna](https://cbradio.co.uk/product/zl7-70-70cm-7-element-special-yagi-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **7 Element ZL Special Yagi Antenna** is a **compact, high-gain directional antenna** designed for the **70cm amateur band (430–440MHz)**. Despite its **short boom length**, it delivers **impressive performance and strong signal gain**, making it one of the most popular choices for UHF operation. --- ## 📡 High Gain Performance ✔ **11.5 dBd gain** ✔ Strong directional signal ✔ Excellent for long-distance contacts --- ## 📏 Compact Yet Powerful - Boom length: **70 cm** - Longest element: **33 cm** - Small footprint with big performance ✔ Ideal where space is limited --- ## 🎯 Directional Precision - Focused beam pattern - Improved signal strength in target direction - Reduced interference from unwanted signals ✔ Better clarity and range --- ## ⚡ High Power Handling ✔ Supports up to **500 Watts** ✔ Suitable for serious amateur radio setups --- ## 📶 Optimised for 70cm Band - Frequency range: **430–440 MHz** - Perfect for UHF amateur radio use --- ## 🔧 Direct Connection Design - Simple feedpoint connection - Easy integration into your setup - Compatible with standard coax systems --- ## 🌦 Built for Outdoor Use ✔ Durable construction ✔ Suitable for mast mounting ✔ Reliable in outdoor conditions --- ## Key Features - 7 element Yagi antenna - High gain (11.5 dBd) - Compact boom design - Directional beam pattern - 500W power handling --- ## Technical Specifications - **Type:** ZL Special Yagi - **Frequency:** 430–440 MHz - **Elements:** 7 - **Boom Length:** 70 cm - **Longest Element:** 33 cm - **Gain:** 11.5 dBd - **VSWR:** ≤ 1.5:1 - **Power Handling:** 500W --- ## Why Choose the ZL Special? ✔ High gain in a compact size ✔ Excellent performance for UHF ✔ Ideal for fixed or portable setups ✔ One of the most popular small Yagis --- ## Ideal For - Amateur radio operators (70cm band) - Base station installations - Portable / field setups - Directional communication --- ## Straight Talking For its size, this antenna **punches well above its weight** — that’s why it’s so popular. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/zl7-70-70cm-7-element-special-yagi-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/zl7-70-70cm-7-element-special-yagi-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/zl7-70-70cm-7-element-special-yagi-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/zl7-70-70cm-7-element-special-yagi-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20ZL7-70%2070cm%207%20element%20special%20Yagi%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fzl7-70-70cm-7-element-special-yagi-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/zl7-70-70cm-7-element-special-yagi-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/zl7-70-70cm-7-element-special-yagi-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/zl7-70-70cm-7-element-special-yagi-antenna/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [G5RV-FSH copper Full Size G5RV Antenna](https://cbradio.co.uk/product/g5rv-fsh-hard-drawn-full-size-g5rv-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Full Size G5RV Antenna** is one of the **most popular multi-band HF antennas ever made**, trusted by amateur radio operators worldwide for its **versatility and solid all-round performance**. Designed as a **practical “do-it-all” antenna**, it delivers reliable operation across multiple HF bands when used with an external tuner. --- ## 🌍 Multi-Band HF Coverage ✔ Covers: **10 / 15 / 20 / 40 / 80 metres** ✔ Resonant on **20m band** ✔ Works across multiple bands with tuner --- ## 📡 Proven G5RV Design - One of the most widely used HF antennas - Balanced performance across bands - Ideal for general-purpose operation ✔ A true “all-rounder” --- ## 🔧 Full Size Performance - **31 metres wire length** - Made from **1.5mm copper wire** - Strong and efficient radiator ✔ Better performance than shortened versions --- ## ⚡ High Power Capability ✔ Handles up to **500 Watts** ✔ Suitable for most HF base stations --- ## 🔌 Ribbon Feeder Included - **9.2 metres 300 Ohm ribbon feeder** - High-quality USA-made line - Improves multi-band performance --- ## 🔗 Coax Friendly Design - Terminates in **SO239 socket** - Connect directly using **PL259 coax cable** - No need for full ladder line runs ✔ Easy integration into your setup --- ## ⚠️ Important Note This antenna works best with an **external ATU (antenna tuner)**. Some internal tuners may not have enough range to tune all bands. --- ## 🏡 Flexible Installation Options Install as: - Inverted “V” - Flat-top dipole - Sloper ✔ Works in most garden spaces --- ## Key Features - Full size G5RV antenna - Multi-band HF coverage (10–80m) - 31m copper wire - 300 Ohm ribbon feeder - SO239 coax connection - 500W power handling --- ## Technical Specifications - **Type:** G5RV multi-band antenna - **Frequency Bands:** 10–80 metres - **Wire Length:** 31 metres - **Feeder Length:** 9.2 metres (300 Ohm ribbon) - **Power Handling:** 500W - **Connector:** SO239 --- ## Why Choose a G5RV? ✔ Covers multiple bands with one antenna ✔ Proven design used worldwide ✔ Great performance for the size ✔ Ideal for general HF use --- ## Ideal For - Amateur radio base stations - Operators with limited space - Multi-band HF users - Beginners to experienced operators --- ## Straight Talking It’s a compromise antenna — but a **very good one**, and that’s why so many people still use it. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/g5rv-fsh-hard-drawn-full-size-g5rv-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/g5rv-fsh-hard-drawn-full-size-g5rv-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/g5rv-fsh-hard-drawn-full-size-g5rv-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/g5rv-fsh-hard-drawn-full-size-g5rv-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20G5RV-FSH%20copper%20Full%20Size%20G5RV%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fg5rv-fsh-hard-drawn-full-size-g5rv-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/g5rv-fsh-hard-drawn-full-size-g5rv-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/g5rv-fsh-hard-drawn-full-size-g5rv-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/g5rv-fsh-hard-drawn-full-size-g5rv-antenna/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Enamelled Copper Antenna wire 50M reel](https://cbradio.co.uk/product/copper-antenna-wire-50m-reel/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **50m Enamelled Copper Wire 1.5mm** is a **high-quality insulated copper wire**, ideal for **HF antenna construction and coil winding projects**. Thanks to its **enamel insulation**, this wire is perfect where **electrical isolation and compact winding** are required. --- ## 📡 Ideal for HF & Shortwave Antennas ✔ Perfect for **long wire and stealth antennas** ✔ Suitable for **HF and shortwave bands** ✔ Insulated design helps reduce unwanted contact issues --- ## 🔧 Perfect for Coil Winding - Ideal for **inductors, chokes and transformers** - Enamel coating allows tight winding - Maintains electrical isolation between turns ✔ Essential for radio projects --- ## ⚡ Enamel Insulated Copper - Thin insulating enamel coating - Prevents short circuits between windings - Maintains conductivity while insulated --- ## 📏 50 Metre Length - Supplied in **50m roll** - Plenty for multiple projects - Cut to size as needed --- ## 💪 Durable & Flexible - Strong copper core - Flexible enough for shaping and winding - Suitable for indoor and outdoor use --- ## ⚙️ Technical Specifications - **Type:** Enamelled copper wire - **Length:** 50 metres - **Diameter:** 1.5 mm - **Insulation:** Enamel coating --- ## Key Features - Insulated copper wire - Ideal for antennas and coils - 50 metre roll - Flexible and durable - Easy to work with --- ## Why Choose This Wire? ✔ Dual-purpose (antenna + coil use) ✔ Clean, insulated finish ✔ Easy to handle and shape ✔ Reliable conductivity --- ## Ideal For - HF antenna builds - Shortwave antennas - Coil winding projects - Amateur radio experiments --- ## Straight Talking If you’re building coils or antennas, this is **the proper wire to do it neatly and correctly**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/copper-antenna-wire-50m-reel/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/copper-antenna-wire-50m-reel/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/copper-antenna-wire-50m-reel/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/copper-antenna-wire-50m-reel/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Enamelled%20Copper%20Antenna%20wire%2050M%20reel&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcopper-antenna-wire-50m-reel%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/copper-antenna-wire-50m-reel/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/copper-antenna-wire-50m-reel/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/copper-antenna-wire-50m-reel/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [50m thick copper polyweave antenna aerial wire](https://cbradio.co.uk/product/50m-thick-copper-polyweave-heavy-duty-antenna-aerial-wire/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **50m Flexweave Copper Antenna Wire** is a **high-quality, heavy-duty wire** designed for building **reliable, high-performance antennas**. With a **multi-stranded copper core and protective PVC coating**, this wire is **strong, flexible, and built to last outdoors**. --- ## 📡 Ideal for Antenna Builds ✔ Perfect for **dipoles, long wire and HF antennas** ✔ Suitable for CB and amateur radio setups ✔ Excellent for permanent or portable installs --- ## 💪 Heavy Duty Construction - Multi-stranded **flexweave copper core** - Strong yet flexible - Resistant to snapping under tension ✔ Built for real-world use --- ## 🌧 PVC Coated Protection - Clear protective coating - Helps prevent tarnishing and corrosion - Weather-resistant for outdoor use ✔ Longer lifespan --- ## 🔧 Easy to Work With - Flexible and easy to handle - Simple to cut and shape - **Solder-friendly** ✔ Ideal for DIY projects --- ## 📏 Generous 50 Metre Length - Supplied in **50m roll** - Enough for multiple antenna builds - Cut to your required lengths --- ## ⚙️ Technical Specifications - **Type:** Flexweave copper antenna wire - **Length:** 50 metres - **Diameter:** approx. 4.0 mm - **Coating:** PVC (clear) - **Material:** Multi-stranded copper --- ## 🇬🇧 UK Stock – Fast Delivery ✔ Ships from the UK ✔ No long delays ✔ No import charges --- ## Key Features - Heavy-duty antenna wire - Multi-strand copper construction - PVC coated for protection - Flexible and strong - 50 metre roll --- ## Why Choose This Wire? ✔ Stronger than standard wire ✔ Easy to work with ✔ Ideal for outdoor antennas ✔ Reliable long-term performance --- ## Ideal For - Dipole antennas - Long wire antennas - HF and CB setups - Portable or fixed installations --- ## Straight Talking If you want antenna wire that **won’t snap, rot or let you down**, this is the proper stuff. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/50m-thick-copper-polyweave-heavy-duty-antenna-aerial-wire/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/50m-thick-copper-polyweave-heavy-duty-antenna-aerial-wire/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/50m-thick-copper-polyweave-heavy-duty-antenna-aerial-wire/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/50m-thick-copper-polyweave-heavy-duty-antenna-aerial-wire/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2050m%20thick%20copper%20polyweave%20antenna%20aerial%20wire&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F50m-thick-copper-polyweave-heavy-duty-antenna-aerial-wire%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/50m-thick-copper-polyweave-heavy-duty-antenna-aerial-wire/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/50m-thick-copper-polyweave-heavy-duty-antenna-aerial-wire/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/50m-thick-copper-polyweave-heavy-duty-antenna-aerial-wire/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [Dipole Centre With SO239 Fitting](https://cbradio.co.uk/product/dipole-centre-with-so239-fitting-make-your-own-wire-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Dipole Centre with SO239 Connector** is the perfect starting point for building your own **wire dipole antenna**. Designed for **easy connection and reliable performance**, it allows you to create a **custom antenna for HF, CB or amateur radio use**. --- ## 🔧 Build Your Own Antenna ✔ Ideal for **DIY dipole antenna projects** ✔ Create custom lengths for your chosen band ✔ Simple and effective design --- ## 🔌 SO239 Coax Connection - Standard **SO239 socket** - Compatible with **PL259 coax plugs** - Secure and reliable connection ✔ Works with most radio setups --- ## 📡 Versatile Use Perfect for: - HF wire antennas - CB base station antennas - Amateur radio dipoles - Portable or home setups --- ## ⚙️ Simple & Reliable - Easy to assemble - Strong central connection point - Ideal for beginners and experienced users --- ## 🏕 Flexible Installation Options Use your dipole as: - Inverted “V” - Horizontal dipole - Sloper ✔ Adapt to your available space --- ## Key Features - Dipole antenna centre - SO239 coax connection - Ideal for wire antennas - Simple DIY installation - Compatible with PL259 --- ## Why Choose This Dipole Centre? ✔ Quick and easy antenna build ✔ Reliable coax connection ✔ Works across multiple bands ✔ Great for DIY enthusiasts --- ## Ideal For - Amateur radio operators - CB base station users - Portable antenna builds - Hobbyists and experimenters --- ## Straight Talking If you want to build your own antenna, this is the **simple, proper way to start** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/dipole-centre-with-so239-fitting-make-your-own-wire-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/dipole-centre-with-so239-fitting-make-your-own-wire-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/dipole-centre-with-so239-fitting-make-your-own-wire-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/dipole-centre-with-so239-fitting-make-your-own-wire-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Dipole%20Centre%20With%20SO239%20Fitting&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdipole-centre-with-so239-fitting-make-your-own-wire-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/dipole-centre-with-so239-fitting-make-your-own-wire-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/dipole-centre-with-so239-fitting-make-your-own-wire-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/dipole-centre-with-so239-fitting-make-your-own-wire-antenna/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [PNI Escort HP 8000L CB radio AM/FM UK40 EU40](https://cbradio.co.uk/product/pni-escort-hp-8000l-cb-radio-am-fm-uk40-eu40-classic-appearance-minor-ii-t800/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=owQTSn6Dsl8[/embed] **Content:** The **8000L CB Radio** is a **high-quality multi-standard CB radio** that combines a **traditional look with modern functionality**. Covering both **UK40 and EU40 channels**, it’s ideal for everyday use and travel across Europe. --- ## 🌍 UK & EU Multi-Standard ✔ **80 channels (UK40 + EU40)** ✔ AM / FM operation ✔ Suitable for use across Europe --- ## 🎛 Classic Design – Modern Features - Traditional front panel layout - Easy-to-use controls - Packed with features usually found on higher-end radios ✔ Familiar feel with added capability --- ## 🎤 Microphone with Channel Controls - Supplied with **Up/Down channel mic** - Easy channel changing on the move - Clear and reliable transmit audio --- ## 🔧 Essential Controls - **RF Gain control** - **Squelch control** - **Quick access Channel 9/19** ✔ Full control over your signal and reception --- ## 🔌 Plug & Play Power - Supplied with **DC lead + cigarette lighter plug** - Easy connection in cars, vans or trucks --- ## 📦 Complete Installation Kit Includes: ✔ Radio unit ✔ Microphone ✔ Mounting bracket with thumb screws ✔ Microphone hanger ✔ Power lead with lighter plug --- ## 🔊 Strong Audio Performance - **2.5W audio output** - Clear receive and transmit - Suitable for mobile environments --- ## 📡 Reliable CB Performance - PLL synthesizer for stable frequency - Double conversion receiver - Good sensitivity and selectivity --- ## Key Features - 80 channel CB radio (UK/EU) - AM / FM modes - RF gain and squelch - Channel 9/19 quick access - Up/Down microphone - Cigarette lighter power lead --- ## Technical Specifications - **Frequency Range:** 25.615 – 28.305 MHz - **Channels:** 80 (UK40 + EU40) - **Power Output:** 4W - **Input Voltage:** 13.8V DC - **Dimensions:** 38 x 115 x 150 mm - **Weight:** 0.8 kg --- ## Why Choose the 8000L? ✔ Simple and reliable CB radio ✔ Classic layout many users prefer ✔ Multi-standard for travel ✔ Great value for the features --- ## Ideal For - Everyday CB users - Truck and van drivers - Beginners and experienced users - European travel --- ## Straight Talking If you like a **proper old-school CB feel but still want modern features**, this hits that sweet spot. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-escort-hp-8000l-cb-radio-am-fm-uk40-eu40-classic-appearance-minor-ii-t800/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-escort-hp-8000l-cb-radio-am-fm-uk40-eu40-classic-appearance-minor-ii-t800/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-escort-hp-8000l-cb-radio-am-fm-uk40-eu40-classic-appearance-minor-ii-t800/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-escort-hp-8000l-cb-radio-am-fm-uk40-eu40-classic-appearance-minor-ii-t800/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%208000L%20CB%20radio%20AM%2FFM%20UK40%20EU40&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-escort-hp-8000l-cb-radio-am-fm-uk40-eu40-classic-appearance-minor-ii-t800%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-escort-hp-8000l-cb-radio-am-fm-uk40-eu40-classic-appearance-minor-ii-t800/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-escort-hp-8000l-cb-radio-am-fm-uk40-eu40-classic-appearance-minor-ii-t800/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-escort-hp-8000l-cb-radio-am-fm-uk40-eu40-classic-appearance-minor-ii-t800/?share=telegram) - **Product categories:** PNI --- ### [5w Medium CB Radio External Extension Speaker](https://cbradio.co.uk/product/5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **5W Mountable Extension Speaker** is a **medium-sized, robust external speaker** designed to deliver **clear audio and flexible mounting options** for CB, ham and two-way radio systems. With a **strong housing and included bracket**, it’s ideal for **vehicle installs or home setups where speaker positioning matters**. --- ## 🔊 Clear Communication Audio ✔ **5W max output (8 Ohm)** ✔ Crisp voice clarity ✔ Designed for speech-focused communication --- ## 🔧 Flexible Mounting Options - Supplied with **mounting bracket** - Install **horizontal, vertical or underslung** - Suitable for dashboards, consoles or walls ✔ Position sound exactly where you need it --- ## 🔌 Universal 3.5mm Connection - Standard **3.5mm jack plug** - Compatible with most radios and audio equipment ✔ Plug-and-play setup --- ## 🚗 Perfect for Vehicle Installations - Ideal for hidden or DIN-mounted radios - Improves audio direction and clarity - Great for trucks, taxis and vans --- ## 🏠 Also Ideal for Base Stations - Works in home radio setups - No external power required - Simple and reliable --- ## ⚡ No Power Needed ✔ Powered directly from your radio ✔ No batteries or PSU required --- ## 📏 Practical Size & Cable Length - Size: **65 x 130 x 80 mm** - Cable: approx. **1.8–2 metres** - Easy to position in vehicle or shack --- ## 📡 Wide Compatibility Suitable for: - CB radios - Ham / amateur radios - Taxi radios - Handheld & mobile transceivers --- ## Key Features - 5W external speaker - 8 Ohm impedance - Mounting bracket included - 3.5mm jack connection - Medium-sized robust housing --- ## Technical Specifications - **Impedance:** 8 Ohms - **Power:** 5W max - **Frequency Response:** 500Hz – 5000Hz - **Cable Length:** approx. 1.8–2m - **Connector:** 3.5mm jack - **Dimensions:** 65 x 130 x 80 mm --- ## Why Choose This Speaker? ✔ Flexible mounting options ✔ Clearer audio than built-in speakers ✔ Durable construction ✔ Easy plug-and-play upgrade --- ## Ideal For - Truck and taxi drivers - 4×4 and van installs - Base station users - Noisy environments --- ## Straight Talking If your radio’s tucked away or hard to hear, this lets you **put the sound exactly where you want it**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%205w%20Medium%20CB%20Radio%20External%20Extension%20Speaker&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/5w-medium-cb-radio-external-extension-speaker-2m-cable-3-5mm-jack-plug/?share=telegram) - **Product categories:** CB Radio Extension Speakers --- ### [iPhone Headphone Adaptor Jack Splitter 3.5mm MP3 iPOD Audio AUX UK Seller](https://cbradio.co.uk/product/iphone-headphone-adaptor-jack-splitter-3-5mm-mp3-ipod-audio-aux-uk-seller/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3.5mm Audio Jack Splitter** lets you **share audio from a single device to two outputs**, making it perfect for listening with a friend or connecting multiple audio devices. --- ## 🔌 Simple Audio Sharing ✔ Split one **3.5mm output into two** ✔ Connect **two headphones or speakers** ✔ Ideal for music, videos, or radio --- ## 📱 Wide Compatibility Works with: - Apple devices (iPhone / iPod with 3.5mm support or adapter) - Smartphones & tablets - MP3 players - Laptops & PCs - Radio & audio equipment --- ## 🎧 Compact & Portable - Small and lightweight - Easy to carry anywhere - Perfect for travel --- ## ⚡ Plug & Play ✔ No setup required ✔ Instant connection ✔ Works straight out of the box --- ## 🚚 Fast UK Shipping ✔ Ships from the UK ✔ No long overseas delays ✔ Get it quickly when you need it --- ## Key Features - 3.5mm audio splitter - Dual output (Y-splitter) - Universal compatibility - Compact design - Plug and play --- ## Ideal For - Sharing music with friends - Watching films together - Connecting multiple speakers - Everyday audio use --- ## Straight Talking It’s a simple little adapter — but once you have one, you’ll **use it more than you think**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/iphone-headphone-adaptor-jack-splitter-3-5mm-mp3-ipod-audio-aux-uk-seller/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/iphone-headphone-adaptor-jack-splitter-3-5mm-mp3-ipod-audio-aux-uk-seller/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/iphone-headphone-adaptor-jack-splitter-3-5mm-mp3-ipod-audio-aux-uk-seller/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/iphone-headphone-adaptor-jack-splitter-3-5mm-mp3-ipod-audio-aux-uk-seller/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20iPhone%20Headphone%20Adaptor%20Jack%20Splitter%203.5mm%20MP3%20iPOD%20Audio%20AUX%20UK%20Seller&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fiphone-headphone-adaptor-jack-splitter-3-5mm-mp3-ipod-audio-aux-uk-seller%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/iphone-headphone-adaptor-jack-splitter-3-5mm-mp3-ipod-audio-aux-uk-seller/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/iphone-headphone-adaptor-jack-splitter-3-5mm-mp3-ipod-audio-aux-uk-seller/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/iphone-headphone-adaptor-jack-splitter-3-5mm-mp3-ipod-audio-aux-uk-seller/?share=telegram) - **Product categories:** RF Adaptors --- ### [red mini springer and flatbar mirror mount](https://cbradio.co.uk/product/red-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **red Mini Springer CB Antenna & Mirror Mount Kit** is a **complete, heavy-duty CB setup**, designed for **trucks, 4x4s, vans and off-road vehicles**. With a **rugged springer antenna and flat bar mirror mount**, this kit gives you **strength, flexibility and solid performance straight out the box**. --- ## 🚛 Complete Ready-to-Fit Kit ✔ Mini Springer antenna ✔ Flat bar mirror mount ✔ **4m RG58 coax with PL259 plug** ✔ Everything you need to get on air --- ## 📡 Proven Springer Performance - Frequency: **27–28 MHz** - **VSWR: 1.5:1 or better** - Power handling: **up to 1000W** ✔ Strong, reliable CB performance --- ## 💪 Built Tough for Real Use - Durable **steel coil construction** - **Powder-coated stainless steel whip** - Flexible spring design ✔ Handles knocks, branches and rough conditions --- ## 🟡 High Visibility RED Finish - Bright RED whip - Easy to spot - Popular with truckers and off-road users ✔ Practical and distinctive --- ## 🔧 Flat Bar Mirror Mount Included - Polished aluminium construction - Fits mirror arms, roof bars, racks - Standard **3/8″ mount fitting** ✔ Strong and secure mounting --- ## 🔌 Plug & Play Setup - **4m RG58 cable** included - Pre-fitted **PL259 connector** - Quick and simple installation --- ## 🇬🇧 Quality UK Made ✔ Antenna made in the UK ✔ Mount manufactured in the UK ✔ Built to a high standard --- ## Key Features - Mini Springer CB antenna - Mirror mount kit included - 4m RG58 coax cable - PL259 connector - Heavy-duty spring coil - Bright RED finish --- ## Technical Specifications **Antenna:** - Frequency: 27–28 MHz - Length: 89 cm - VSWR: 1.5:1 or better - Power: 1000W - Fitting: 3/8″ **Mount:** - Material: Polished aluminium - Fitting: 3/8″ - Cable: 4m RG58 - Connector: PL259 --- ## Why Choose This Kit? ✔ Complete installation package ✔ Tough, flexible antenna design ✔ Ideal for trucks and off-road use ✔ Reliable CB performance --- ## Ideal For - Truck drivers - Farmers & off-road users - 4×4 vehicles - Vans and work vehicles --- ## Straight Talking If you want an aerial that can **take abuse and still perform**, this is exactly what it’s built for. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/red-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/red-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/red-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/red-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20red%20mini%20springer%20and%20flatbar%20mirror%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fred-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/red-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/red-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/red-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=telegram) - **Product categories:** CB Aerials --- ### [yellow mini springer and flatbar mirror mount](https://cbradio.co.uk/product/yellow-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Yellow Mini Springer CB Antenna & Mirror Mount Kit** is a **complete, heavy-duty CB setup**, designed for **trucks, 4x4s, vans and off-road vehicles**. With a **rugged springer antenna and flat bar mirror mount**, this kit gives you **strength, flexibility and solid performance straight out the box**. --- ## 🚛 Complete Ready-to-Fit Kit ✔ Mini Springer antenna ✔ Flat bar mirror mount ✔ **4m RG58 coax with PL259 plug** ✔ Everything you need to get on air --- ## 📡 Proven Springer Performance - Frequency: **27–28 MHz** - **VSWR: 1.5:1 or better** - Power handling: **up to 1000W** ✔ Strong, reliable CB performance --- ## 💪 Built Tough for Real Use - Durable **steel coil construction** - **Powder-coated stainless steel whip** - Flexible spring design ✔ Handles knocks, branches and rough conditions --- ## 🟡 High Visibility Yellow Finish - Bright yellow whip - Easy to spot - Popular with truckers and off-road users ✔ Practical and distinctive --- ## 🔧 Flat Bar Mirror Mount Included - Polished aluminium construction - Fits mirror arms, roof bars, racks - Standard **3/8″ mount fitting** ✔ Strong and secure mounting --- ## 🔌 Plug & Play Setup - **4m RG58 cable** included - Pre-fitted **PL259 connector** - Quick and simple installation --- ## 🇬🇧 Quality UK Made ✔ Antenna made in the UK ✔ Mount manufactured in the UK ✔ Built to a high standard --- ## Key Features - Mini Springer CB antenna - Mirror mount kit included - 4m RG58 coax cable - PL259 connector - Heavy-duty spring coil - Bright yellow finish --- ## Technical Specifications **Antenna:** - Frequency: 27–28 MHz - Length: 89 cm - VSWR: 1.5:1 or better - Power: 1000W - Fitting: 3/8″ **Mount:** - Material: Polished aluminium - Fitting: 3/8″ - Cable: 4m RG58 - Connector: PL259 --- ## Why Choose This Kit? ✔ Complete installation package ✔ Tough, flexible antenna design ✔ Ideal for trucks and off-road use ✔ Reliable CB performance --- ## Ideal For - Truck drivers - Farmers & off-road users - 4×4 vehicles - Vans and work vehicles --- ## Straight Talking If you want an aerial that can **take abuse and still perform**, this is exactly what it’s built for. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/yellow-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/yellow-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/yellow-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/yellow-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20yellow%20mini%20springer%20and%20flatbar%20mirror%20mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fyellow-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/yellow-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/yellow-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/yellow-mini-springer-flatbar-mirror-mount-complete-cb-aerial-kit/?share=telegram) - **Product categories:** CB Aerials --- ### [HF Mobile Antenna SPX-200S 6 Band PLUG 'N' GO](https://cbradio.co.uk/product/hf-mobile-antenna-spx-200s-6-band-plug-n-go/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Moonraker SPX-200S HF Mobile Antenna** is a **versatile 6-band mobile antenna** designed for operators who want **multi-band HF capability without the size of larger antennas**. Covering **6m to 80m**, it’s a **compact, weatherproof solution** for reliable mobile operation. --- ## 🌍 6 Band HF Coverage ✔ Covers: **6 / 10 / 15 / 20 / 40 / 80 metres** ✔ Multi-band flexibility in one antenna ✔ No need for multiple whips --- ## 🚗 Compact Mobile Design - Length: **130 cm** - Easier to manage than longer HF antennas - Ideal for everyday mobile use ✔ Great balance of size and performance --- ## ⚡ Solid Power Handling ✔ Handles up to **120 Watts** ✔ Suitable for most HF mobile radios --- ## 📡 Efficient Helical Design - Helical winding on **fibreglass whip** - Weather-protected construction - Designed for durability and performance ✔ Built for real-world conditions --- ## 🔧 Plug & Go Operation - Simple setup - Quick band changes using **fly lead system** - No complex tuning required --- ## 🔌 Standard PL259 Connection - **PL259 fitting** - Compatible with SO239 mounts and coax - Works with most mobile installations --- ## 🌧 Weatherproof Construction ✔ Fibreglass whip with protective coating ✔ Designed for outdoor use ✔ Reliable in all weather conditions --- ## Key Features - 6 band HF mobile antenna - Covers 6–80 metres - Compact 130 cm length - 120W power handling - Helical fibreglass design - Fly lead band switching - PL259 connection --- ## Technical Specifications - **Frequency Bands:** 6–80 metres - **Length:** 130 cm - **VSWR:** 1.5:1 or better - **Power Handling:** 120W - **Connector:** PL259 --- ## Why Choose the SPX-200S? ✔ More compact than larger HF antennas ✔ Covers multiple bands in one unit ✔ Easy to use and install ✔ Durable and weatherproof --- ## Ideal For - Mobile HF operators - 4×4 and overland setups - Amateur radio users - Those wanting a smaller multi-band antenna --- ## Straight Talking If the bigger antennas are too much, this gives you **multi-band HF performance in a more manageable size**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/hf-mobile-antenna-spx-200s-6-band-plug-n-go/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/hf-mobile-antenna-spx-200s-6-band-plug-n-go/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/hf-mobile-antenna-spx-200s-6-band-plug-n-go/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/hf-mobile-antenna-spx-200s-6-band-plug-n-go/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20HF%20Mobile%20Antenna%20SPX-200S%206%20Band%20PLUG%20%27N%27%20GO&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhf-mobile-antenna-spx-200s-6-band-plug-n-go%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/hf-mobile-antenna-spx-200s-6-band-plug-n-go/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/hf-mobile-antenna-spx-200s-6-band-plug-n-go/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/hf-mobile-antenna-spx-200s-6-band-plug-n-go/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [HF Mobile HAM Antenna SPX-300S 9 Band](https://cbradio.co.uk/product/hf-mobile-ham-antenna-spx-300s-9-band-plug-n-go/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **SPX-300S 9 Band HF Mobile Antenna** is a **high-performance mobile antenna** designed for operators who want **multi-band HF capability on the move**. Covering **6m through to 80m**, this antenna delivers **serious performance with plug-and-go simplicity**. --- ## 🌍 9 Band HF Coverage ✔ Covers: **6 / 10 / 12 / 15 / 17 / 20 / 30 / 40 / 80 metres** ✔ Wide frequency flexibility ✔ Ideal for mobile HF operation --- ## 🚗 Designed for Mobile Use - Optimised for vehicle installations - Strong, stable construction - Perfect for cars, vans and 4×4 setups --- ## ⚡ High Power Handling ✔ Handles up to **200 Watts** ✔ Suitable for more powerful radios ✔ Reliable under demanding conditions --- ## 📡 Efficient Performance - **VSWR: 1.5:1 or better** - Good efficiency for a mobile HF antenna - Designed for real-world use --- ## 🔧 Plug & Go Operation - Simple setup - Quick band changes via **fly lead system** - No complex tuning systems required ✔ Easy to operate on the move --- ## 🔌 Standard PL259 Connection - **PL259 fitting (SO239 compatible)** - Works with most mobile mounts and coax setups ✔ Universal compatibility --- ## 📏 Full Size Mobile Antenna - Length: **165 cm** - Balanced size for performance vs practicality --- ## Key Features - 9 band HF mobile antenna - 6–80 metre coverage - 200W power handling - Plug & play operation - Fly lead band selection - PL259 connection --- ## Technical Specifications - **Frequency Bands:** 6–80 metres - **Length:** 165 cm - **VSWR:** 1.5:1 or better - **Power Handling:** 200W - **Connector:** PL259 --- ## Why Choose the SPX-300S? ✔ Covers multiple HF bands in one antenna ✔ Designed for mobile operation ✔ Higher power handling than portable models ✔ Simple and effective design --- ## Ideal For - Mobile HF operators - 4×4 and overland setups - Amateur radio enthusiasts - Users wanting multi-band capability in one antenna --- ## Straight Talking If you want **HF on the move without complicated setups**, this gets you on multiple bands quickly and reliably. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/hf-mobile-ham-antenna-spx-300s-9-band-plug-n-go/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/hf-mobile-ham-antenna-spx-300s-9-band-plug-n-go/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/hf-mobile-ham-antenna-spx-300s-9-band-plug-n-go/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/hf-mobile-ham-antenna-spx-300s-9-band-plug-n-go/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20HF%20Mobile%20HAM%20Antenna%20SPX-300S%209%20Band&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhf-mobile-ham-antenna-spx-300s-9-band-plug-n-go%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/hf-mobile-ham-antenna-spx-300s-9-band-plug-n-go/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/hf-mobile-ham-antenna-spx-300s-9-band-plug-n-go/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/hf-mobile-ham-antenna-spx-300s-9-band-plug-n-go/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [SPX100 9 band plug N go HF Portable HAM aerial](https://cbradio.co.uk/product/spx-100-9-band-plug-n-go-hf-portable-ham-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **SPX-100 9 Band Portable HF Antenna** is a **versatile plug-and-go antenna** designed for **portable, mobile and home HF operation**. With a **10-section telescopic whip** and multi-band coverage from **6m to 80m**, it’s the perfect companion for operators who want **maximum flexibility in a compact package**. --- ## 🌍 9 Band HF Coverage ✔ Covers: **6 / 10 / 12 / 15 / 17 / 20 / 30 / 40 / 80 metres** ✔ Wide frequency versatility ✔ Ideal for portable and field operation --- ## 📡 Plug & Go Simplicity - No complex setup required - Quick band changes - Easy to deploy anywhere ✔ Perfect for on-the-go operation --- ## 🧳 Ultra Portable Design - Collapses to just **47cm** - Extends to approx. **150cm** - Fits easily in a suitcase or backpack ✔ Ideal for travel and holidays --- ## 🔧 Telescopic Whip Construction - **10-section telescopic whip** - Adjustable length for tuning - Compact when stored --- ## 🔌 Multiple Connection Options Includes adapters for: - **3/8″ thread** - **PL259 connection** - **BNC connection** ✔ Compatible with a wide range of radios including portable rigs like the Yaesu FT-817ND / FT-818 --- ## ⚡ Solid Performance - **VSWR: 1.5:1 or better** - Power handling: **up to 50W** - Efficient for its size and portability --- ## 🏕 Perfect for Any Setup Use it: - Portable (field / SOTA / camping) - Mobile (vehicle setups) - Home base (temporary installs) --- ## Key Features - 9 band HF antenna - Telescopic whip design - Plug & play operation - Compact and travel-friendly - Multiple connector options - Covers 6m to 80m --- ## Technical Specifications - **Type:** Helical multi-band antenna - **Bands:** 6–80 metres - **Length:** 47–150 cm - **VSWR:** 1.5:1 or better - **Power Handling:** 50W - **Mount:** 3/8″ thread - **Adapters:** PL259 & BNC included --- ## Why Choose the SPX-100? ✔ Covers multiple HF bands in one antenna ✔ Extremely portable ✔ Easy to use anywhere ✔ Great for travel and field work --- ## Ideal For - Portable ham radio operators - Travellers and holiday use - Field operations (SOTA / POTA) - Compact mobile setups --- ## Straight Talking If you want an antenna you can **throw in a bag and use almost anywhere**, this is exactly that. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/spx-100-9-band-plug-n-go-hf-portable-ham-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/spx-100-9-band-plug-n-go-hf-portable-ham-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/spx-100-9-band-plug-n-go-hf-portable-ham-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/spx-100-9-band-plug-n-go-hf-portable-ham-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20SPX100%209%20band%20plug%20N%20go%20HF%20Portable%20HAM%20aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fspx-100-9-band-plug-n-go-hf-portable-ham-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/spx-100-9-band-plug-n-go-hf-portable-ham-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/spx-100-9-band-plug-n-go-hf-portable-ham-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/spx-100-9-band-plug-n-go-hf-portable-ham-antenna/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Stainless Adjustable Hatch Back Mount With SO239 Fitting CB aerial Ham Antenna](https://cbradio.co.uk/product/stainless-adjustable-hatch-back-mount-with-so239-fitting-cb-aerial-ham-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **HKITSS-S Boot / Hatch Antenna Mount** is a **high-quality stainless steel mount** designed for **secure, adjustable installation on vehicle boot lids or hatchbacks**. Supplied with **4m of RG58 coax and pre-fitted connectors**, it’s a **complete, ready-to-install solution** for CB and radio antennas. --- ## 🚗 Ideal Boot / Hatch Mounting Solution ✔ Clamps securely to **boot lid or hatch edge** ✔ No drilling required ✔ Clean and professional install --- ## 🔧 Fully Adjustable Design - Adjustable angle for optimal antenna position - Ensures proper alignment and performance - Adapts to different vehicle shapes ✔ Fine-tune your setup easily --- ## 📡 SO239 Antenna Connection - Standard **SO239 socket fitting** - Compatible with PL259-equipped coax - Works with a wide range of antennas --- ## 🔌 Quality Coax Included - **4 metres RG58 cable** - One end: **SO239 connection** - Other end: **PL259 plug** ✔ Ready to connect straight to your radio --- ## 💪 Stainless Steel Construction - Durable, corrosion-resistant - Built for long-term outdoor use - Strong and reliable mounting ✔ Ideal for all weather conditions --- ## 📶 Compatible With Popular Antennas Suitable for antennas such as: - MRQ 550 - MRQ 575 - Most CB and ham mobile antennas --- ## Key Features - Boot / hatch antenna mount - Stainless steel construction - Fully adjustable angle - SO239 socket - 4m RG58 coax cable - PL259 connector --- ## Why Choose This Mount? ✔ No drilling required ✔ Adjustable for best performance ✔ High-quality materials ✔ Complete installation solution --- ## Ideal For - Cars and hatchbacks - Vans and 4x4s - Temporary or permanent installs - Users avoiding roof drilling --- ## Straight Talking If you don’t want to drill your roof but still want a **proper solid antenna setup**, this is a great solution. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/stainless-adjustable-hatch-back-mount-with-so239-fitting-cb-aerial-ham-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/stainless-adjustable-hatch-back-mount-with-so239-fitting-cb-aerial-ham-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/stainless-adjustable-hatch-back-mount-with-so239-fitting-cb-aerial-ham-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/stainless-adjustable-hatch-back-mount-with-so239-fitting-cb-aerial-ham-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Stainless%20Adjustable%20Hatch%20Back%20Mount%20With%20SO239%20Fitting%20CB%20aerial%20Ham%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fstainless-adjustable-hatch-back-mount-with-so239-fitting-cb-aerial-ham-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/stainless-adjustable-hatch-back-mount-with-so239-fitting-cb-aerial-ham-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/stainless-adjustable-hatch-back-mount-with-so239-fitting-cb-aerial-ham-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/stainless-adjustable-hatch-back-mount-with-so239-fitting-cb-aerial-ham-antenna/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [100m RG213 MIL SPEC 50 OHM low loss Coax](https://cbradio.co.uk/product/100m-rg213-mil-spec-50-ohm-low-loss-coax-cable-100-metre-drum-rg-213/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG213U 100m Coax Cable Drum** is a **high-quality MIL-SPEC low loss cable**, designed for **serious radio installations where performance matters**. With a **thick copper braid and robust construction**, this cable is ideal for **long runs, base stations, and professional setups**. --- ## 📡 Low Loss Performance ✔ Designed for **minimal signal loss over distance** ✔ Excellent for longer cable runs ✔ Maintains strong signal integrity --- ## 💪 Military Specification Quality - **MIL-C-17-G compliant RG-213U** - Thick, durable outer jacket - Built for demanding environments ✔ Reliable in all conditions --- ## 🔧 High Quality Construction - **Core:** 7 × 0.72 mm conductors - **Braid:** up to 95–98% copper coverage - Strong shielding for reduced interference ✔ Clean, stable signal transmission --- ## 📏 Full 100 Metre Drum - Supplied on a **100m reel** - Ideal for large installations - Cut to size as needed --- ## 📶 Suitable for Multiple Applications Perfect for: - CB radio systems - Ham / amateur radio - Taxi and commercial antennas - Base station installs ✔ Anywhere low loss is critical --- ## ⚙️ Technical Specifications - **Type:** RG-213U (MIL Spec) - **Length:** 100 metres - **Impedance:** 50 Ohm - **Diameter:** approx. 9.65 mm - **Core:** 7 × 0.72 mm - **Braid:** up to 98% copper coverage - **Loss @ 100MHz:** approx. 0.7 dB per 10m - **Colour:** Black --- ## 🔌 Why Choose RG213? ✔ Lower loss than RG58 on long runs ✔ Better shielding and durability ✔ Ideal for base stations and high-performance setups --- ## Key Features - 100m coax cable drum - MIL spec RG213U - Low loss performance - Heavy-duty construction - 50 Ohm impedance - High copper braid coverage --- ## Ideal For - Base station installations - Long cable runs - Professional radio setups - Outdoor antenna systems --- ## Straight Talking If you’re running long coax, **this is the proper cable to use — not the thin cheap stuff**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/100m-rg213-mil-spec-50-ohm-low-loss-coax-cable-100-metre-drum-rg-213/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/100m-rg213-mil-spec-50-ohm-low-loss-coax-cable-100-metre-drum-rg-213/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/100m-rg213-mil-spec-50-ohm-low-loss-coax-cable-100-metre-drum-rg-213/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/100m-rg213-mil-spec-50-ohm-low-loss-coax-cable-100-metre-drum-rg-213/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20100m%20RG213%20MIL%20SPEC%2050%20OHM%20low%20loss%20Coax&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F100m-rg213-mil-spec-50-ohm-low-loss-coax-cable-100-metre-drum-rg-213%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/100m-rg213-mil-spec-50-ohm-low-loss-coax-cable-100-metre-drum-rg-213/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/100m-rg213-mil-spec-50-ohm-low-loss-coax-cable-100-metre-drum-rg-213/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/100m-rg213-mil-spec-50-ohm-low-loss-coax-cable-100-metre-drum-rg-213/?share=telegram) - **Product categories:** RG213 --- ### [Toyota Landcruiser HDJ80 4.2 TD 12V cylinder head Gasket, 90>95](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-td-12v-cylinder-head-gasket-9095/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Toyota Land Cruiser 4.2 TD Cylinder Head Gasket (5 Notch)** is a **high-quality replacement gasket** designed for the 12-valve 4.2 diesel engine. Built to handle **high compression and heat**, this gasket is ideal for **engine rebuilds, repairs, or head replacements**. --- ## 🔧 Designed for 4.2 TD 12V Engines ✔ Specifically for **HDJ80 4.2 TD (1990–1995)** ✔ Fits **12-valve (1HD-T) engines only** ✔ Precision fit for correct sealing --- ## ⚙️ 5 Notch Specification - **5 notch thickness type** - Ensures correct compression ratio - Important for proper engine rebuild setup ⚠️ *Always confirm correct notch size before purchase* --- ## 💪 Built for Diesel Performance - Designed to withstand **high combustion pressure** - Heat-resistant construction - Reliable long-term sealing --- ## 🔩 Ideal for Engine Work Perfect for: - Cylinder head replacement - Engine rebuilds - Repairing blown head gaskets --- ## 🔄 Wider Compatibility Although listed for: - Toyota Land Cruiser HDJ80 ✔ Also fits other **Toyota 4.2 diesel engines (1HD-T variants)** ⚠️ *Check compatibility with your engine before purchase* --- ## Key Features - Cylinder head gasket - 5 notch specification - Designed for 12V diesel engines - High heat and pressure resistance - OE-style replacement --- ## Why Choose This Gasket? ✔ Correct fit for 4.2 TD engines ✔ Reliable sealing performance ✔ Ideal for rebuilds and repairs ✔ Great value vs dealer prices --- ## Straight Talking When you’re doing a head job on a 4.2 diesel, this is **not the part to cut corners on — this gets it sealed properly**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-td-12v-cylinder-head-gasket-9095/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-td-12v-cylinder-head-gasket-9095/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-td-12v-cylinder-head-gasket-9095/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-td-12v-cylinder-head-gasket-9095/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20Landcruiser%20HDJ80%204.2%20TD%2012V%20cylinder%20head%20Gasket%2C%2090%3E95&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-hdj80-4-2-td-12v-cylinder-head-gasket-9095%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-td-12v-cylinder-head-gasket-9095/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-td-12v-cylinder-head-gasket-9095/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-td-12v-cylinder-head-gasket-9095/?share=telegram) - **Product categories:** Land Cruiser --- ### [DM510U CB Radio Power mic uniden wired](https://cbradio.co.uk/product/dm510u-cb-radio-power-mic-uniden-wired/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **4 Pin CB Radio Microphone** is a **cost-effective replacement mic** designed for **Uniden wired CB radios** and other compatible 4-pin models. If your original mic is damaged or worn out, this is a **simple, affordable fix** to get you back on the air. --- ## 🔌 Standard 4-Pin Compatibility ✔ Fits most **Uniden wired CB radios** ✔ Compatible with many other 4-pin CB models --- ## 🎤 Simple, Reliable Performance - Clear transmit audio - Easy push-to-talk (PTT) operation - Ideal for everyday use --- ## 💪 Durable Build - **High-quality metal 4-pin plug** - Strong coiled cable - Built for regular use --- ## 🔧 Plug & Play Replacement ✔ Direct replacement for original microphone ✔ No setup required ✔ Ready to use straight out of the box --- ## 📦 Brand New - Supplied **brand new and unused** - Great value replacement option --- ## Key Features - 4-pin CB microphone - Compatible with Uniden radios - Metal connector plug - Coiled cable - Push-to-talk operation --- ## Why Choose This Mic? ✔ Cheap and effective replacement ✔ Easy plug-and-play setup ✔ Durable metal connector ✔ Gets you back on air quickly --- ## Ideal For - Replacing broken microphones - Spare mic for your vehicle - Budget CB setups - Everyday use --- ## Straight Talking If your mic’s stopped working, this is the **quick, cheap fix that does the job**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/dm510u-cb-radio-power-mic-uniden-wired/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/dm510u-cb-radio-power-mic-uniden-wired/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/dm510u-cb-radio-power-mic-uniden-wired/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/dm510u-cb-radio-power-mic-uniden-wired/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20DM510U%20CB%20Radio%20Power%20mic%20uniden%20wired&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdm510u-cb-radio-power-mic-uniden-wired%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/dm510u-cb-radio-power-mic-uniden-wired/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/dm510u-cb-radio-power-mic-uniden-wired/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/dm510u-cb-radio-power-mic-uniden-wired/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [TTI 5289 High Power mobile CB radio AM FM UK EU](https://cbradio.co.uk/product/high-power-cb-radio-tti-tcb-5289-mobile-by-anytone-am-fm-uk-eu/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=8pYhTpomWpQ[/embed] **Content:** The **TTI TCB-5289 CB Radio** (also sold as the **PNI HP60 CB Radio**) is a **high-performance, feature-rich CB radio** designed for users who want **more power, more control, and more flexibility**. Built on a proven platform by TTI / Anytone, this radio delivers **strong performance and advanced functionality** for serious CB users. --- ## ⚡ High Power Output ✔ Up to **50W FM / 15W AM** ✔ Strong transmit performance ✔ Ideal for long-distance communication --- ## 🌍 Multi-Standard Operation - Works across **UK & EU bands (UK40 / EU40)** - Programmable frequency ranges - Suitable for European travel --- ## 🎛 Advanced Features - **Dual Watch** (monitor 2 channels) - **Scan function** - **Channel memory (8 channels)** - **ASQ & manual squelch** - **Noise blanker filter** - **Roger beep & echo function** - **TOT (Time Out Timer)** ✔ Fully equipped for demanding users --- ## 🔧 Programmable Functions - Customisable via **optional programming cable/software** - Dedicated rear programming port - Tailor settings to your needs --- ## 🔊 Clear Audio Performance - Built-in **3W speaker** - External speaker socket available - Clean transmit and receive audio --- ## 🎤 Supplied with 6-Pin Microphone - Standard 6-pin mic connection - Full control and clear transmission --- ## 📺 Modern Display - **Blue multi-colour screen** - Clear and easy to read - Displays key radio information --- ## 🔌 Installation Ready ✔ Mounting bracket & hardware included ✔ Power lead included ❌ *No cigarette lighter plug supplied* --- ## Key Features - High power CB radio (up to 50W FM) - AM / FM operation - Multi-standard (UK/EU) - Programmable functions - Dual watch & scan - Echo & noise filtering - External speaker support --- ## Technical Specifications - **Frequency Range:** - 25.615 – 30.105 MHz (programmable) - **Output Power:** - FM: 4W / 15W / 50W - AM: 4W / 15W - **Power Supply:** 13.2V - **Current Draw:** Max 11A - **Speaker Power:** 3W - **Dimensions:** approx. 158 x 48 x 165 mm - **Weight:** approx. 1.1 kg --- ## Why Choose This Radio? ✔ Much more powerful than standard CB radios ✔ Packed with advanced features ✔ Programmable for flexibility ✔ Ideal for experienced users --- ## Ideal For - Long-distance CB communication - Advanced users - Truck drivers & 4×4 setups - Users upgrading from basic radios --- ## ⚠️ Important Note This is a **high-power radio** — always ensure you are operating **within local regulations**. --- ## Straight Talking If a basic 4W radio isn’t enough, this gives you **serious performance and full control**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/high-power-cb-radio-tti-tcb-5289-mobile-by-anytone-am-fm-uk-eu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/high-power-cb-radio-tti-tcb-5289-mobile-by-anytone-am-fm-uk-eu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/high-power-cb-radio-tti-tcb-5289-mobile-by-anytone-am-fm-uk-eu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/high-power-cb-radio-tti-tcb-5289-mobile-by-anytone-am-fm-uk-eu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TTI%205289%20High%20Power%20mobile%20CB%20radio%20AM%20FM%20UK%20EU&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhigh-power-cb-radio-tti-tcb-5289-mobile-by-anytone-am-fm-uk-eu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/high-power-cb-radio-tti-tcb-5289-mobile-by-anytone-am-fm-uk-eu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/high-power-cb-radio-tti-tcb-5289-mobile-by-anytone-am-fm-uk-eu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/high-power-cb-radio-tti-tcb-5289-mobile-by-anytone-am-fm-uk-eu/?share=telegram) - **Product categories:** TTi --- ### [Extension Speaker CB HAM Radio Scanner](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **5W Two Way Radio Extension Speaker** is a **compact, high-quality external speaker** designed to improve audio clarity in **CB, ham and two-way radio setups**. Perfect for both **in-vehicle and home base stations**, it delivers **clear, forward-facing sound where your built-in speaker can’t**. --- ## 🔊 Clear, Powerful Audio ✔ **5W nominal output (8W max)** ✔ Crisp voice clarity for communication ✔ Ideal for noisy environments --- ## 🔌 Universal 3.5mm Connection - Standard **3.5mm jack plug** - Compatible with most radios and audio devices ✔ Plug-and-play simplicity --- ## 🚗 Perfect for Vehicle Installations - Improves audio when radio is hidden or DIN-mounted - Ideal for dashboards, overhead consoles or cabins - Great upgrade for compact radios --- ## 🏠 Also Ideal for Home Base Use - Works with CB and amateur radios - No external power required - Simple desktop or bench setup --- ## ⚡ No Power Needed ✔ Powered directly from your radio ✔ No batteries or external PSU required --- ## 📡 Wide Compatibility Suitable for: - CB radios - Ham / amateur radios - PMR / two-way radios - 10m, 2m / 70cm setups --- ## 🎯 Optimised for Voice Communication - Frequency response: **500Hz – 5000Hz** - Tuned for clear speech reproduction ✔ Cuts through background noise --- ## Key Features - 5W external speaker - 3.5mm jack connection - 8 Ohm impedance - Compact and robust design - No external power required --- ## Technical Specifications - **Impedance:** 8 Ohms - **Nominal Power:** 5 Watts - **Max Power:** 8 Watts - **Frequency Response:** 500Hz – 5000Hz - **Connector:** 3.5mm jack --- ## Why Choose This Speaker? ✔ Improves audio clarity instantly ✔ Simple plug-and-play setup ✔ Works with most radios ✔ Ideal for hidden or DIN installs --- ## Ideal For - CB radio users - Truck and van drivers - Home base stations - Noisy environments --- ## Straight Talking If your radio sounds muffled or too quiet, this is one of the **cheapest and easiest upgrades you can make**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Extension%20Speaker%20CB%20HAM%20Radio%20Scanner&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fextension-speaker-cb-ham-radio-scanner%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/extension-speaker-cb-ham-radio-scanner/?share=telegram) - **Product categories:** CB Radio Extension Speakers --- ### [U Bolts V Bolt Twin Pack 1.75 x M8](https://cbradio.co.uk/product/u-bolts-v-bolt-twin-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast-pole/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **M8 U-Bolt Twin Pack (1.75″ Mast Clamp)** is a **heavy-duty fixing solution** for securing aerial masts, antenna poles and brackets. Designed for **professional and DIY installations**, these bolts provide a **strong, reliable hold in all weather conditions**. --- ## 🔧 Secure Mast Fixing ✔ Suitable for poles up to **1.5″ (38mm diameter)** ✔ Strong clamping for aerials and antenna mounts ✔ Ideal for permanent outdoor installations --- ## 🛰 Compatible with Common Brackets - Works with **T & K brackets** - Suitable for satellite, Freeview and antenna installs - Universal mounting solution --- ## 💪 Heavy Duty Construction - **Nickel galvanised plated** - Corrosion resistant - Built for long-term outdoor use ✔ Won’t rust easily --- ## 📦 Complete Fixing Kit - 2 x U-bolts (V-bolts) - Nuts included - Ready to install --- ## 📏 Dimensions - Fits mast: up to **38mm (1.5″)** - Outside width: **51.2mm** - Outside height: **68mm** --- ## 🛠 Trade Quality ✔ Used by professional aerial engineers ✔ Reliable and proven design ✔ Strong and dependable --- ## Key Features - M8 U-bolt twin pack - Fits up to 38mm mast - Galvanised finish - Nuts included - Suitable for aerial & satellite installs --- ## Why Choose These U-Bolts? ✔ Strong and secure mounting ✔ Weather-resistant finish ✔ Compatible with common brackets ✔ Trusted by installers --- ## Ideal For - Aerial and antenna mounting - Satellite dish installs - Freeview setups - Pole and mast fixing --- ## Straight Talking If you want your mast to **stay exactly where you put it**, these will do the job properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/u-bolts-v-bolt-twin-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast-pole/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/u-bolts-v-bolt-twin-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast-pole/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/u-bolts-v-bolt-twin-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast-pole/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/u-bolts-v-bolt-twin-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast-pole/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20U%20Bolts%20V%20Bolt%20Twin%20Pack%201.75%20x%20M8&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fu-bolts-v-bolt-twin-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast-pole%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/u-bolts-v-bolt-twin-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast-pole/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/u-bolts-v-bolt-twin-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast-pole/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/u-bolts-v-bolt-twin-pack-1-75-x-m8-for-up-to-1-5-aerial-or-antenna-mast-pole/?share=telegram) - **Product categories:** Installation aid --- ### [Hi Vis High Viz Visibility Vest Orange EN471 Safety Waistcoat one size](https://cbradio.co.uk/product/hi-vis-high-viz-visibility-vest-orange-en471-safety-waistcoat-one-size/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Orange Reflective Safety Vest** is an **essential item for every vehicle**, especially when travelling across Europe. In many countries, it is **legally required to have a high-visibility vest in your vehicle** and to wear it in the event of a breakdown or emergency. --- ## ⚠️ EU Travel Requirement ✔ Mandatory in many European countries ✔ Required during roadside emergencies ✔ Helps you stay compliant and avoid fines --- ## 👀 High Visibility Safety - Bright **orange fluorescent colour** - Reflective strips for **night visibility** - Makes you clearly visible to other drivers ✔ Essential for roadside safety --- ## 🚗 Keep in Your Vehicle - Compact and lightweight - Easy to store in glovebox or door pocket - Ready when you need it --- ## 🦺 Easy to Wear - Quick over-the-head design - One size fits most - Suitable for drivers and passengers --- ## 📦 Ideal for Travel & Emergency Kits Perfect for: - Car travel across Europe - Breakdown kits - Commercial vehicles - Everyday safety --- ## Key Features - High visibility orange vest - Reflective safety strips - Lightweight and compact - Easy to wear - Essential travel item --- ## Why You Need One ✔ Legal requirement in many EU countries ✔ Improves roadside safety ✔ Cheap but essential item ✔ Peace of mind when travelling --- ## Straight Talking For the price of this, it’s not worth the risk — **you’ll wish you had it when you need it**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/hi-vis-high-viz-visibility-vest-orange-en471-safety-waistcoat-one-size/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/hi-vis-high-viz-visibility-vest-orange-en471-safety-waistcoat-one-size/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/hi-vis-high-viz-visibility-vest-orange-en471-safety-waistcoat-one-size/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/hi-vis-high-viz-visibility-vest-orange-en471-safety-waistcoat-one-size/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Hi%20Vis%20High%20Viz%20Visibility%20Vest%20Orange%20EN471%20Safety%20Waistcoat%20one%20size&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhi-vis-high-viz-visibility-vest-orange-en471-safety-waistcoat-one-size%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/hi-vis-high-viz-visibility-vest-orange-en471-safety-waistcoat-one-size/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/hi-vis-high-viz-visibility-vest-orange-en471-safety-waistcoat-one-size/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/hi-vis-high-viz-visibility-vest-orange-en471-safety-waistcoat-one-size/?share=telegram) - **Product categories:** Health and Safety --- ### [8 Pin HAM or CB Radio Mic Plugs Pack of 3](https://cbradio.co.uk/product/3-x-8-pin-ham-or-cb-radio-microphone-plugs-pack-of-3-mic-plug/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **8 Pin Microphone Plug Pack (3x)** is a **practical replacement and repair solution** for CB and amateur radio microphones. Supplied as a **pack of 3**, these connectors are ideal for **repairs, rewiring, or building custom microphone leads**. --- ## 🔌 Universal 8-Pin Compatibility ✔ Fits radios using **standard 8-pin mic connections** ✔ Common on many CB & ham radios Compatible with brands such as: - Kenwood - Alinco - Yaesu - Icom --- ## 🛠 Ideal for Repairs & Custom Builds - Replace damaged or worn mic plugs - Rewire microphones - Build custom cables ✔ Essential for radio enthusiasts and installers --- ## 📦 Pack of 3 – Great Value - 3 x 8-pin microphone plugs included - Always have spares ready - Ideal for workshop or trade use --- ## 🔧 Easy to Work With - Solder-type connections - Standard pin layout - Suitable for DIY installation --- ## 💪 Durable Construction - Strong outer casing - Reliable connection - Built for repeated use --- ## Key Features - 8-pin microphone connectors - Pack of 3 - Suitable for CB & ham radios - Solder-type terminals - Universal compatibility --- ## What You Get - 3 x 8-pin mic plugs --- ## Why Choose This Pack? ✔ Cost-effective multi-pack ✔ Compatible with major brands ✔ Ideal for repairs and upgrades ✔ Reliable connection --- ## Ideal For - Radio repairs - Amateur radio setups - CB installations - Workshop spares --- ## Straight Talking If you’re fixing or modifying microphones, having a few of these on hand **just makes life easier**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/3-x-8-pin-ham-or-cb-radio-microphone-plugs-pack-of-3-mic-plug/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/3-x-8-pin-ham-or-cb-radio-microphone-plugs-pack-of-3-mic-plug/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/3-x-8-pin-ham-or-cb-radio-microphone-plugs-pack-of-3-mic-plug/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/3-x-8-pin-ham-or-cb-radio-microphone-plugs-pack-of-3-mic-plug/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%208%20Pin%20HAM%20or%20CB%20Radio%20Mic%20Plugs%20Pack%20of%203&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F3-x-8-pin-ham-or-cb-radio-microphone-plugs-pack-of-3-mic-plug%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/3-x-8-pin-ham-or-cb-radio-microphone-plugs-pack-of-3-mic-plug/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/3-x-8-pin-ham-or-cb-radio-microphone-plugs-pack-of-3-mic-plug/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/3-x-8-pin-ham-or-cb-radio-microphone-plugs-pack-of-3-mic-plug/?share=telegram) - **Product categories:** Microphone Plugs --- ### [Toyota Landcruiser HDJ80 4.2 12v Exhaust Valve, 90>95](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-12v-exhaust-valve-9095/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Toyota Land Cruiser 4.2 TD Exhaust Valve** is a **high-quality OE replacement part**, designed to restore performance and reliability to your engine without the main dealer price tag. --- ## 🔧 Designed for Land Cruiser 4.2 Diesel Engines ✔ Suitable for **HDJ80 series** ✔ Fits other **4.2L Toyota diesel engines** (1HD variants) ✔ Precision engineered for correct fit and operation --- ## 💪 OE Quality Without the Price - Manufactured to **OEM standards** - Strong, heat-resistant construction - Built to handle high temperatures and pressure ✔ Reliable performance you can trust --- ## ⚙️ Engine Performance & Reliability - Maintains proper exhaust flow - Helps restore engine efficiency - Essential for engine rebuilds or repairs --- ## 🔩 Ideal for Repairs & Rebuilds Perfect for: - Cylinder head rebuilds - Engine overhauls - Replacing worn or burnt valves --- ## Key Features - Exhaust valve for 4.2 TD engines - OE quality replacement - High temperature resistance - Precision engineered fit - Durable construction --- ## Compatibility - Toyota Land Cruiser HDJ80 - Other Toyota **4.2 diesel engines (1HD-T / 1HD-FT / similar variants)** ⚠️ *Always check compatibility with your specific engine before purchase* --- ## Why Buy This Valve? ✔ OE quality at a fraction of dealer cost ✔ Reliable and durable ✔ Ideal for professional or DIY repairs ✔ Great value replacement part --- ## Straight Talking Why pay dealer prices when you can get **the same quality for a lot less**? ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-12v-exhaust-valve-9095/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-12v-exhaust-valve-9095/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-12v-exhaust-valve-9095/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-12v-exhaust-valve-9095/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20Landcruiser%20HDJ80%204.2%2012v%20Exhaust%20Valve%2C%2090%3E95&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-hdj80-4-2-12v-exhaust-valve-9095%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-12v-exhaust-valve-9095/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-12v-exhaust-valve-9095/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-hdj80-4-2-12v-exhaust-valve-9095/?share=telegram) - **Product categories:** Land Cruiser --- ### [10/12Amp power pack cb radio psu](https://cbradio.co.uk/product/10-12amp-regulated-power-pack-cb-radio-power-supply-unit-psu/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **13.8V 10–12A CB Radio Power Supply Unit** is a **compact but more powerful PSU**, ideal for running **CB and amateur radios as a home base station**. With **10A continuous output and 12A surge**, it’s a solid upgrade over smaller units — giving you **more headroom and stability**. --- ## ⚡ More Power for Your Setup ✔ **10A continuous output** ✔ **12A surge capacity** ✔ Ideal for radios with higher current draw ✔ More reliable under load --- ## 🔌 Stable 13.8V Output - Fixed **13.8V DC output** - Clean, consistent power supply - Designed specifically for radio equipment --- ## 📦 Compact & Practical Design - Dimensions: **155 x 115 x 255 mm** - Weight: **1.3 kg** - Easy to place on desk or radio bench --- ## 🔧 Front Panel Connections - Convenient front output terminals - Quick and easy connection - Ideal for base station setups --- ## 🔇 Low Noise Performance - Ripple noise: **100mVp-p** - Suitable for radio use - Helps minimise interference --- ## 🛡 Built-In Protection - **Current limiting protection** - Helps safeguard your radio - Reliable and safe operation --- ## 🏠 Ideal for Base Station Use Perfect for: - Home CB setups - Amateur radio stations - Workshop or bench use ✔ Turns your mobile radio into a base station --- ## Key Features - 13.8V fixed output PSU - 10A continuous / 12A surge - Compact switch mode design - Front panel terminals - Low ripple noise - Built-in protection --- ## Technical Specifications - **Input Voltage:** 220V AC - **Output Voltage:** 13.8V DC - **Output Current:** 10A (12A surge) - **Ripple Noise:** 100mVp-p - **Dimensions:** 155 x 115 x 255 mm - **Weight:** 1.3 kg --- ## Why Choose This PSU? ✔ More powerful than entry-level units ✔ Stable supply for demanding radios ✔ Compact and easy to use ✔ Great value upgrade --- ## Ideal For - Higher-end CB radios - SSB radios needing extra current - Base station setups - Users upgrading from 5A supplies --- ## Straight Talking If the smaller PSU is borderline, this gives you **proper headroom so your radio runs clean and stable**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/10-12amp-regulated-power-pack-cb-radio-power-supply-unit-psu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/10-12amp-regulated-power-pack-cb-radio-power-supply-unit-psu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/10-12amp-regulated-power-pack-cb-radio-power-supply-unit-psu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/10-12amp-regulated-power-pack-cb-radio-power-supply-unit-psu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2010%2F12Amp%20power%20pack%20cb%20radio%20psu&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F10-12amp-regulated-power-pack-cb-radio-power-supply-unit-psu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/10-12amp-regulated-power-pack-cb-radio-power-supply-unit-psu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/10-12amp-regulated-power-pack-cb-radio-power-supply-unit-psu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/10-12amp-regulated-power-pack-cb-radio-power-supply-unit-psu/?share=telegram) - **Product categories:** Power Supplies and Inverters --- ### [Digital TV Aerial truck caravan 12-24v Amplifier](https://cbradio.co.uk/product/digital-tv-aerial-truck-caravan-12-24v-amplifier-dtv-1000-moonraker-digi-pro/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **DTV-1000 Digital TV Antenna** is a **compact, amplified TV aerial** designed for **clear digital TV reception at home or on the move**. With **multiple mounting options and 12/24V compatibility**, it’s ideal for **vehicles, caravans, boats or indoor use**. --- ## 📺 Designed for Digital TV Reception ✔ Covers **UHF (470–870 MHz)** ✔ Covers **VHF (47–230 MHz)** ✔ Suitable for modern digital TV systems --- ## ⚡ Built-In Amplifier - **Low-noise amplifier (20 ±3 dB gain)** - Improves signal strength and clarity - Helps maintain reception in weaker signal areas --- ## 🚗 Perfect for Mobile Use Ideal for: - Trucks - Cars - Motorhomes - Caravans - Boats ✔ Works on **12V & 24V systems** --- ## 🔌 Flexible Power Options - Powered via **set-top box antenna output** - Or included **12V / 24V cigarette lighter lead** ✔ Works wherever you need it --- ## 🔧 Multiple Mounting Options - **Pole mount** (home or caravan) - **Suction cup mount** (windscreen or smooth surfaces) ✔ Quick and easy setup --- ## 🌦 Built for Indoor & Outdoor Use - Waterproof housing - Anti-UV design - Lightweight and compact ✔ Durable in all conditions --- ## Key Features - Digital TV antenna - UHF & VHF coverage - Built-in amplifier - 12V / 24V compatible - Indoor & outdoor use - Multiple mounting options --- ## Why Choose the DTV-1000? ✔ Versatile installation options ✔ Works at home or on the move ✔ Compact and easy to install ✔ Reliable amplified reception --- ## Ideal For - Caravan and motorhome users - Truck drivers - Boats and mobile setups - Home backup TV antenna --- ## Straight Talking If you want a **simple TV aerial that works both at home and on the road**, this is a solid, flexible solution ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/digital-tv-aerial-truck-caravan-12-24v-amplifier-dtv-1000-moonraker-digi-pro/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/digital-tv-aerial-truck-caravan-12-24v-amplifier-dtv-1000-moonraker-digi-pro/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/digital-tv-aerial-truck-caravan-12-24v-amplifier-dtv-1000-moonraker-digi-pro/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/digital-tv-aerial-truck-caravan-12-24v-amplifier-dtv-1000-moonraker-digi-pro/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Digital%20TV%20Aerial%20truck%20caravan%2012-24v%20Amplifier&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdigital-tv-aerial-truck-caravan-12-24v-amplifier-dtv-1000-moonraker-digi-pro%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/digital-tv-aerial-truck-caravan-12-24v-amplifier-dtv-1000-moonraker-digi-pro/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/digital-tv-aerial-truck-caravan-12-24v-amplifier-dtv-1000-moonraker-digi-pro/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/digital-tv-aerial-truck-caravan-12-24v-amplifier-dtv-1000-moonraker-digi-pro/?share=telegram) - **Product categories:** TV aerials --- ### [CB Radio DIN in dash Mount PRESIDENT Jimmy Johnny Harry 2 henry classic](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-jimmy-johnny-harry-2-henry-classic/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Metal DIN Mount Adapter for CB Radios** allows you to install your CB radio **neatly into a standard car stereo DIN slot**, giving a **clean, factory-style finish**. Built from **all-metal construction**, this is a **professional-grade solution** — not the flimsy plastic versions. --- ## 🚗 Clean, Professional Installation ✔ Fits into standard **single DIN dashboard slot** ✔ Gives a **factory-fitted look** ✔ Keeps your dashboard tidy and uncluttered --- ## 💪 All Metal Construction - Heavy-duty metal casing - Strong and durable - Long-lasting compared to plastic alternatives ✔ Built properly — no cheap flexing --- ## 📏 Precise Fit - Slot dimensions: **117 x 37 mm** - Designed for compatible compact CB radios --- ## 🔌 Compatible Models Works with popular radios including: - President Henry Classic CB Radio - President Harry Classic CB Radio - President Harry II CB Radio - President Johnny II CB Radio - President Legend II CB Radio - President Jimmi II CB Radio - Uniden 510 CB Radio - Uniden 520 CB Radio - Stabo XM3001 / XM3003 --- ## 🔊 Important Installation Note ⚠️ When installed in a DIN slot, the radio’s **built-in speaker will be covered** ✔ You will need an **external speaker for audio** --- ## 📦 What You Get - Metal DIN mounting cage - Fixing support for compatible radios ❌ **CB radio NOT included** --- ## Key Features - DIN slot CB radio mount - All-metal construction - Professional dashboard finish - Compatible with multiple models - Compact and secure fit --- ## Why Choose This DIN Mount? ✔ Clean, factory-style installation ✔ Strong and durable metal build ✔ Perfect fit for compact CB radios ✔ Ideal upgrade from under-dash brackets --- ## Ideal For - Professional vehicle installs - Clean dashboard setups - Trucks, vans and cars - CB users wanting a neat finish --- ## Straight Talking If you want your CB radio to look like it **belongs in your dashboard — not hanging underneath it**, this is the way to do it. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-jimmy-johnny-harry-2-henry-classic/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-jimmy-johnny-harry-2-henry-classic/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-jimmy-johnny-harry-2-henry-classic/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-jimmy-johnny-harry-2-henry-classic/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20DIN%20in%20dash%20Mount%20PRESIDENT%20Jimmy%20Johnny%20Harry%202%20henry%20classic&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-din-in-dash-mount-president-jimmy-johnny-harry-2-henry-classic%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-jimmy-johnny-harry-2-henry-classic/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-jimmy-johnny-harry-2-henry-classic/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-din-in-dash-mount-president-jimmy-johnny-harry-2-henry-classic/?share=telegram) - **Product categories:** CB Radio Din Mounts --- ### [Mobile to base or portable converter universal bracket so239 Pole Mount](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **SO239 Pole Mount Antenna Bracket** is a **heavy-duty universal clamp mount** designed to convert **mobile antennas into base or portable setups** with ease. Perfect for mounting on poles or masts, this bracket gives you a **simple and effective way to upgrade your antenna setup**. --- ## 🔧 Mobile to Base Conversion ✔ Use mobile antennas in a **fixed or portable setup** ✔ Ideal for home, garden or temporary installs ✔ Great for improving performance vs vehicle mounting --- ## 📡 Universal SO239 Fitting - **SO239 socket fitting** - Compatible with PL259 coax cables - Works with many CB and amateur antenna systems --- ## 💪 Extra Heavy Duty Clamp - Strong metal construction - Designed for outdoor use - Secure grip on pole or mast --- ## 📏 Mast Compatibility - Fits poles up to **51mm (2″) diameter** - Suitable for standard antenna masts --- ## ⚡ Grounding Option - Includes **earth tag connection** - Allows proper grounding if required - Helps improve performance and reduce interference --- ## 📐 Compact Design - Size: **10 x 10 cm** - Easy to install and position - Lightweight but robust --- ## Key Features - SO239 antenna mount - Heavy-duty pole clamp - Fits up to 51mm mast - Earth tag included - Mobile-to-base conversion - Durable construction --- ## Why Choose This Mount? ✔ Simple and effective solution ✔ Strong and reliable ✔ Works with standard coax connections ✔ Ideal for portable or fixed use --- ## Ideal For - CB base station setups - Amateur radio installations - Portable field setups - Temporary antenna mounting --- ## Straight Talking If you want a **quick way to mount an antenna on a pole without hassle**, this does the job properly ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mobile%20to%20base%20or%20portable%20converter%20universal%20bracket%20so239%20Pole%20Mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-so239-pole-mount/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [MICRO 2 Compact Mobile CB radio UK40 EU40](https://cbradio.co.uk/product/cb-radio-moonraker-micro-compact-mobile-multistandard-am-fm-uk40-eu40-channels/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Moonraker Micro CB Radio** (Anytone platform) is a **super compact, easy-to-use CB radio** designed for drivers who want **simple, reliable communication without taking up space**. Backed by a **well-known brand with UK support**, it’s an ideal entry-level choice. --- ## 🚗 Ultra Compact Design ✔ Tiny size: **approx. 100 x 100 x 23 mm** ✔ Fits virtually anywhere in the vehicle ✔ Perfect for modern dashboards --- ## 🌍 Multi-Standard European Operation - **80 channels (40 UK + 40 EU)** - AM / FM modes - Works across European bands ✔ Great for travel and flexibility --- ## 🔊 Simple, Reliable Operation - **Auto squelch** for noise reduction - Manual volume control - AM/FM selector - UP/DOWN channel buttons ✔ Designed for ease of use --- ## 📺 Clear Display - Bright **orange channel display** - Easy to read at a glance - Minimal, user-friendly layout --- ## 🔌 Practical Features - Front microphone socket - Internal speaker - External speaker jack - Supplied with mounting bracket & power lead --- ## ⚡ Legal Output Power - **4 Watts output** (standard CB power) - Stable performance for everyday communication --- ## Key Features - Ultra compact CB radio - 80 channels (UK + EU) - AM / FM operation - Auto squelch - Front mic socket - External speaker support - Simple controls --- ## Technical Specifications - **Frequency Range:** - 26.965 – 27.405 MHz (EU) - 27.60125 – 27.99125 MHz (UK) - **Channels:** 80 (40 UK / 40 EU) - **Modes:** AM / FM - **Power Output:** 4W - **Dimensions:** approx. 100 x 100 x 23 mm --- ## What’s in the Box? - Moonraker Micro CB radio - Microphone - Mounting bracket - Power lead - User manual --- ## Why Choose This Radio? ✔ Extremely compact and discreet ✔ Simple, no-fuss operation ✔ Trusted platform with UK support ✔ Ideal first CB radio --- ## Ideal For - Beginners - Cars with limited space - Simple everyday use - European travel --- ## Straight Talking If you just want a **small, reliable CB radio that’s easy to use and doesn’t take over your dashboard**, this is a great pick. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-moonraker-micro-compact-mobile-multistandard-am-fm-uk40-eu40-channels/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-moonraker-micro-compact-mobile-multistandard-am-fm-uk40-eu40-channels/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-moonraker-micro-compact-mobile-multistandard-am-fm-uk40-eu40-channels/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-moonraker-micro-compact-mobile-multistandard-am-fm-uk40-eu40-channels/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20MICRO%202%20Compact%20Mobile%20CB%20radio%20UK40%20EU40&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-moonraker-micro-compact-mobile-multistandard-am-fm-uk40-eu40-channels%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-moonraker-micro-compact-mobile-multistandard-am-fm-uk40-eu40-channels/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-moonraker-micro-compact-mobile-multistandard-am-fm-uk40-eu40-channels/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-moonraker-micro-compact-mobile-multistandard-am-fm-uk40-eu40-channels/?share=telegram) - **Product categories:** Moonraker --- ### [Mobile to base or portable converter universal bracket 3/8 STUD Pole Mount](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-3-8-stud-pole-mount/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **3/8″ Pole Mount Antenna Bracket with SO239** is a **heavy-duty clamp mount** designed to convert **mobile CB or ham antennas into base or portable setups**. Perfect for mounting on poles, masts or temporary installations, it gives you **maximum flexibility from your existing mobile antennas**. --- ## 🔧 Mobile to Base Conversion Made Easy ✔ Use your **mobile antenna as a base station antenna** ✔ Ideal for temporary or permanent installs ✔ Great for home, field or portable setups --- ## 📡 Universal 3/8″ Antenna Fitment - **3/8″ female stud fitting** - Compatible with most CB and ham mobile antennas - Works with popular whip and coil antennas --- ## 🔌 SO239 Coax Connection - Standard **SO239 socket** - Connects directly to PL259 coax cables - Reliable RF connection --- ## 💪 Extra Heavy Duty Construction - Strong metal clamp design - Built for outdoor use - Secure hold on masts and poles --- ## 📏 Mast Compatibility - Fits poles up to **51mm (2″) diameter** - Suitable for standard antenna masts --- ## ⚡ Grounding Option - Includes **earth tag connection point** - Allows proper grounding if required - Improves performance and safety --- ## 📐 Compact & Practical Size - Approx. **10 x 10 cm** - Easy to install and position - Lightweight but robust --- ## Key Features - 3/8″ stud antenna mount - SO239 coax connection - Heavy-duty pole clamp - Fits up to 51mm mast - Earth tag for grounding - Converts mobile antennas to base use --- ## Why Choose This Mount? ✔ Turns mobile antennas into base antennas ✔ Strong and reliable design ✔ Easy installation ✔ Great for portable setups --- ## Ideal For - CB base station setups - Amateur radio use - Portable / field antennas - Temporary installations --- ## Straight Talking If you’ve got a **mobile antenna and want to use it at home or on a pole**, this is exactly what you need. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-3-8-stud-pole-mount/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-3-8-stud-pole-mount/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-3-8-stud-pole-mount/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-3-8-stud-pole-mount/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Mobile%20to%20base%20or%20portable%20converter%20universal%20bracket%203%2F8%20STUD%20%20Pole%20Mount&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmobile-to-base-or-portable-converter-universal-bracket-3-8-stud-pole-mount%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-3-8-stud-pole-mount/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-3-8-stud-pole-mount/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/mobile-to-base-or-portable-converter-universal-bracket-3-8-stud-pole-mount/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [CB radio handheld PNI Escort HP 62 CB kit](https://cbradio.co.uk/product/cb-radio-handheld-pni-escort-hp-62-cb-antenna-pin-magnetic-base-cb-kit/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **PNI Escort HP-62 CB Radio Kit** is a **compact handheld CB radio** that can also be used as a **mobile setup in your vehicle** when paired with an external antenna. This bundle includes the **Extra 48 discreet magnetic antenna**, giving you a **complete and flexible CB solution**. --- ## ⚠️ Important This version is powered via **12V car adapter only** ❌ **No battery pack included** ✔ Designed primarily for **vehicle use with handheld convenience** --- ## 📻 Handheld Meets Mobile ✔ Use as a **compact handheld-style radio** ✔ Connect to your car via **cigarette lighter adapter** ✔ Attach external antenna for improved range --- ## 🌍 Multi-Standard European Operation - AM / FM modes - Multi-standard frequency selection - Works across European CB bands ✔ Ideal for travel --- ## 🔊 Key Radio Features - **4W output power** - RF Gain (receiver sensitivity control) - Automatic & manual squelch - Channel scan - Dual Watch (monitor two channels) --- ## 📺 Clear Display & Monitoring - Channel display - Signal strength indicator - Active function indicators - Easy-to-read interface --- ## 🔌 Connectivity - External antenna connection - Headphone/mic socket (Midland-compatible) - Car cigarette lighter adapter included --- ## 📡 Extra 48 Discreet Antenna Included - Compact **45cm mag mount antenna** - Pre-tuned for quick use - Blends in like a standard car aerial - Approx. **10 km range** (ideal conditions) --- ## 🌬 Quiet & Aerodynamic - Anti-noise design - Reduces wind interference - Stable performance on the move --- ## 🔧 Easy Setup 1. Plug into 12V socket 2. Mount antenna on roof 3. Connect antenna to radio 4. Select country band 5. Ready to use --- ## Key Features - Handheld-style CB radio - 12V vehicle operation - Multi-standard EU bands - External antenna capability - Compact and portable - Antenna included --- ## What’s Included - PNI HP-62 CB radio - Hand microphone unit - 12V car adapter - **PNI Extra 48 antenna (mag mount)** - Antenna cable (pre-fitted) - Socket cover - User manual --- ## Why Choose This Kit? ✔ Flexible handheld/mobile use ✔ Simple plug-and-play setup ✔ Discreet antenna included ✔ Great value solution --- ## Ideal For - Occasional CB users - Portable setups in vehicles - Discreet installations - Budget-friendly mobile use --- ## Straight Talking It’s a **handheld-style radio that works best in the car** — simple, compact, and surprisingly capable when paired with an external antenna. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-handheld-pni-escort-hp-62-cb-antenna-pin-magnetic-base-cb-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-handheld-pni-escort-hp-62-cb-antenna-pin-magnetic-base-cb-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-handheld-pni-escort-hp-62-cb-antenna-pin-magnetic-base-cb-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-handheld-pni-escort-hp-62-cb-antenna-pin-magnetic-base-cb-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20radio%20handheld%20PNI%20Escort%20HP%2062%20CB%20kit&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-handheld-pni-escort-hp-62-cb-antenna-pin-magnetic-base-cb-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-handheld-pni-escort-hp-62-cb-antenna-pin-magnetic-base-cb-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-handheld-pni-escort-hp-62-cb-antenna-pin-magnetic-base-cb-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-handheld-pni-escort-hp-62-cb-antenna-pin-magnetic-base-cb-kit/?share=telegram) - **Product categories:** CB Radio Starter Kits, PNI --- ### [CB Radio Kit PNI Escort HP 7210 CB Aerial 48](https://cbradio.co.uk/product/cb-radio-kit-pni-escort-hp-7110-asq-rf-gain-4w-12v-cb-aerial-pni-extra-48-cu/) **Published:** February 13, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=EjoEiHPVfwA[/embed] **Content:** The **PNI Escort HP 7210 CB Radio Kit** combines a **compact, feature-packed CB radio** with the **discreet Extra 48 antenna**, giving you a **complete plug-and-play communication setup**. Perfect for drivers who want a **simple, affordable and tidy CB installation**. --- ## 📦 Complete CB Starter Kit ✔ Compact CB radio ✔ Magnetic mount antenna included ✔ Ready to install and use ✔ No complicated setup required --- ## 🚗 Ultra Compact CB Radio (HP 7210) - Size: **100 x 98 x 23 mm** - Fits easily into tight dashboards - Ideal for modern vehicles --- ## 🌍 Multi-Standard European Operation - Works across European CB bands - Easy norm selection via key combination - Default: **EC 40CH FM 4W** ✔ Great for travel across Europe --- ## 🔊 Advanced Radio Features - **RF Gain (9 levels)** - Manual squelch (28 levels) - **ASQ automatic squelch (9 levels)** - Channel scan - Emergency channel - Keypad lock ✔ Full control despite compact size --- ## 📺 Clear Display & Controls - Red backlit display - Shows channel, signal and functions - TX/RX LED indicators (red/green) --- ## 📡 Discreet Extra 48 Antenna Included - Compact **45cm antenna** - Magnetic mount – no drilling - Pre-tuned from factory - Blends in like a standard car aerial ✔ Ideal for subtle installations --- ## 🌬 Aerodynamic & Quiet - Anti-noise design - Reduces wind noise - Stable performance while driving --- ## 📏 Communication Range - Up to **~10 km** in ideal conditions - Suitable for everyday CB use --- ## 🔧 Easy Installation 1. Plug radio into 12V socket 2. Mount antenna on roof 3. Connect cable 4. Select country norm 5. Ready to go --- ## Key Features - Compact CB radio + antenna kit - 12V operation - Multi-standard EU use - ASQ + RF Gain - Magnetic mount antenna - Plug-and-play setup --- ## What’s Included - PNI HP 7210 CB radio - Microphone - Mounting bracket - Power cable - **PNI Extra 48 antenna (mag mount)** - Antenna cable (pre-fitted) - User manual --- ## Why Choose This Kit? ✔ Everything you need in one box ✔ Discreet and tidy setup ✔ Easy installation ✔ Great value starter system --- ## Ideal For - First-time CB users - Cars and vans - Discreet installs - Everyday communication --- ## Straight Talking If you want a **simple CB setup that’s easy to fit and doesn’t look bulky**, this kit does the job perfectly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-radio-kit-pni-escort-hp-7110-asq-rf-gain-4w-12v-cb-aerial-pni-extra-48-cu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-radio-kit-pni-escort-hp-7110-asq-rf-gain-4w-12v-cb-aerial-pni-extra-48-cu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-radio-kit-pni-escort-hp-7110-asq-rf-gain-4w-12v-cb-aerial-pni-extra-48-cu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-radio-kit-pni-escort-hp-7110-asq-rf-gain-4w-12v-cb-aerial-pni-extra-48-cu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Kit%20PNI%20Escort%20HP%207210%20CB%20Aerial%2048&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-radio-kit-pni-escort-hp-7110-asq-rf-gain-4w-12v-cb-aerial-pni-extra-48-cu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-radio-kit-pni-escort-hp-7110-asq-rf-gain-4w-12v-cb-aerial-pni-extra-48-cu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-radio-kit-pni-escort-hp-7110-asq-rf-gain-4w-12v-cb-aerial-pni-extra-48-cu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-radio-kit-pni-escort-hp-7110-asq-rf-gain-4w-12v-cb-aerial-pni-extra-48-cu/?share=telegram) - **Product categories:** CB Radio Starter Kits, PNI --- ### [cb aerial extension lead 2.5m long](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-2-5m-long-high-quality-rg58-and-pl258-coupler/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG58 Coax Cable with PL259 Connectors (2.5m)** is a **high-quality, ready-made antenna lead** designed for **reliable signal transfer in CB, amateur radio and scanner setups**. Built using **premium RG58 with a tight 95% braided shield**, this cable delivers **solid performance with reduced interference**. --- ## 🔌 Ready to Use ✔ Pre-fitted **PL259 connectors (both ends)** ✔ No soldering or assembly required ✔ Plug straight into radio and antenna --- ## 📡 High Quality RG58 Construction - **95% braided shielding** for improved performance - Flexible and durable outer jacket - Stable signal transmission ✔ Better than standard low-grade RG58 --- ## 📏 Ideal 2.5 Metre Length - Perfect for most mobile installs - Enough reach for roof-mounted antennas - Tidy routing inside vehicle --- ## 🔁 Wide Compatibility Suitable for: - CB radios - Amateur (ham) radios - Scanners - SWR meters and accessories --- ## ⚙️ Hand Assembled Quality - Built using **quality cable and connectors** - Securely fitted PL259 plugs - Designed for reliability --- ## ✂️ Custom Lengths Available We can supply this cable in **any length required** — just contact us before ordering. --- ## Key Features - RG58 coax cable - PL259 connectors both ends - 95% braid shielding - 2.5 metre length - Flexible and durable - Ready to use --- ## Why Choose This Cable? ✔ Reliable everyday performance ✔ Better shielding than cheap alternatives ✔ Ready-made convenience ✔ Ideal for mobile setups --- ## Ideal For - Car CB installations - Ham radio setups - Scanner users - SWR meter connections --- ## Straight Talking If you just need a **good quality, no-nonsense coax lead that works properly**, this is a solid choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-2-5m-long-high-quality-rg58-and-pl258-coupler/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-2-5m-long-high-quality-rg58-and-pl258-coupler/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-2-5m-long-high-quality-rg58-and-pl258-coupler/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-2-5m-long-high-quality-rg58-and-pl258-coupler/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20cb%20aerial%20extension%20lead%202.5m%20long&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-aerial-extension-lead-2-x-pl259-2-5m-long-high-quality-rg58-and-pl258-coupler%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-2-5m-long-high-quality-rg58-and-pl258-coupler/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-2-5m-long-high-quality-rg58-and-pl258-coupler/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-2-5m-long-high-quality-rg58-and-pl258-coupler/?share=telegram) - **Product categories:** Patch Leads --- ### [cb aerial extension lead 2 x pl259 3.5m long](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-3-5m-long-high-quality-rg58-and-pl258-coupler/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG58 Coax Cable with PL259 Connectors (3.5m)** is a **high-quality, ready-made antenna lead** designed for **reliable signal transfer in CB, amateur radio and scanner setups**. Built using **premium RG58 with a tight 95% braided shield**, this cable delivers **solid performance with reduced interference**. --- ## 🔌 Ready to Use ✔ Pre-fitted **PL259 connectors (both ends)** ✔ No soldering or assembly required ✔ Plug straight into radio and antenna --- ## 📡 High Quality RG58 Construction - **95% braided shielding** for improved performance - Flexible and durable outer jacket - Stable signal transmission ✔ Better than standard low-grade RG58 --- ## 📏 Ideal 3.5 Metre Length - Perfect for most mobile installs - Enough reach for roof-mounted antennas - Tidy routing inside vehicle --- ## 🔁 Wide Compatibility Suitable for: - CB radios - Amateur (ham) radios - Scanners - SWR meters and accessories --- ## ⚙️ Hand Assembled Quality - Built using **quality cable and connectors** - Securely fitted PL259 plugs - Designed for reliability --- ## ✂️ Custom Lengths Available We can supply this cable in **any length required** — just contact us before ordering. --- ## Key Features - RG58 coax cable - PL259 connectors both ends - 95% braid shielding - 3.5 metre length - Flexible and durable - Ready to use --- ## Why Choose This Cable? ✔ Reliable everyday performance ✔ Better shielding than cheap alternatives ✔ Ready-made convenience ✔ Ideal for mobile setups --- ## Ideal For - Car CB installations - Ham radio setups - Scanner users - SWR meter connections --- ## Straight Talking If you just need a **good quality, no-nonsense coax lead that works properly**, this is a solid choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-3-5m-long-high-quality-rg58-and-pl258-coupler/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-3-5m-long-high-quality-rg58-and-pl258-coupler/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-3-5m-long-high-quality-rg58-and-pl258-coupler/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-3-5m-long-high-quality-rg58-and-pl258-coupler/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20cb%20aerial%20extension%20lead%202%20x%20pl259%203.5m%20long&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-aerial-extension-lead-2-x-pl259-3-5m-long-high-quality-rg58-and-pl258-coupler%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-3-5m-long-high-quality-rg58-and-pl258-coupler/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-3-5m-long-high-quality-rg58-and-pl258-coupler/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-3-5m-long-high-quality-rg58-and-pl258-coupler/?share=telegram) - **Product categories:** Patch Leads --- ### [cb aerial extension lead 2 x pl259 4m long](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-4m-long-high-quality-rg58-and-pl258-coupler/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **RG58 Coax Cable with PL259 Connectors (4m)** is a **high-quality, ready-made antenna lead** designed for **reliable signal transfer in CB, amateur radio and scanner setups**. Built using **premium RG58 with a tight 95% braided shield**, this cable delivers **solid performance with reduced interference**. --- ## 🔌 Ready to Use ✔ Pre-fitted **PL259 connectors (both ends)** ✔ No soldering or assembly required ✔ Plug straight into radio and antenna --- ## 📡 High Quality RG58 Construction - **95% braided shielding** for improved performance - Flexible and durable outer jacket - Stable signal transmission ✔ Better than standard low-grade RG58 --- ## 📏 Ideal 4 Metre Length - Perfect for most mobile installs - Enough reach for roof-mounted antennas - Tidy routing inside vehicle --- ## 🔁 Wide Compatibility Suitable for: - CB radios - Amateur (ham) radios - Scanners - SWR meters and accessories --- ## ⚙️ Hand Assembled Quality - Built using **quality cable and connectors** - Securely fitted PL259 plugs - Designed for reliability --- ## ✂️ Custom Lengths Available We can supply this cable in **any length required** — just contact us before ordering. --- ## Key Features - RG58 coax cable - PL259 connectors both ends - 95% braid shielding - 4 metre length - Flexible and durable - Ready to use --- ## Why Choose This Cable? ✔ Reliable everyday performance ✔ Better shielding than cheap alternatives ✔ Ready-made convenience ✔ Ideal for mobile setups --- ## Ideal For - Car CB installations - Ham radio setups - Scanner users - SWR meter connections --- ## Straight Talking If you just need a **good quality, no-nonsense coax lead that works properly**, this is a solid choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-4m-long-high-quality-rg58-and-pl258-coupler/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-4m-long-high-quality-rg58-and-pl258-coupler/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-4m-long-high-quality-rg58-and-pl258-coupler/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-4m-long-high-quality-rg58-and-pl258-coupler/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20cb%20aerial%20extension%20lead%202%20x%20pl259%204m%20long&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fcb-aerial-extension-lead-2-x-pl259-4m-long-high-quality-rg58-and-pl258-coupler%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-4m-long-high-quality-rg58-and-pl258-coupler/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-4m-long-high-quality-rg58-and-pl258-coupler/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/cb-aerial-extension-lead-2-x-pl259-4m-long-high-quality-rg58-and-pl258-coupler/?share=telegram) - **Product categories:** Patch Leads --- ### [LWHF-40 hf vhf 40 6m multiband long wire](https://cbradio.co.uk/product/lwhf-40-hf-vhf-40-6m-multi-band-ham-radio-long-wire-antenna-aerial-lw10/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **LWHF-40 End-Fed Long Wire Antenna** is a **versatile multi-band HF antenna** designed for easy installation and strong performance across multiple bands. With an integrated **9:1 UNUN**, it can be fed directly with **50 Ohm coax**, making it ideal for both beginners and experienced operators. --- ## 📡 Wide HF Band Coverage - Covers **40m to 6m bands (7–52 MHz)** - Multi-band operation with an **ATU (antenna tuner)** - Ideal for HF communications and DX --- ## ⚙️ Built-In 9:1 UNUN ✔ Matches high-impedance wire to **50 Ohm coax** ✔ Simplifies installation ✔ Improves efficiency across bands --- ## 📏 Compact Yet Effective - **10 metre wire length** - Easy to fit in gardens or portable setups - Flexible installation options --- ## 🔧 Flexible Mounting Options Install it your way: - Straight (horizontal) - **Inverted “V”** - Sloper configuration - Bent or dog-legged to suit space ✔ Perfect for restricted garden layouts --- ## ⚡ Strong Power Handling - **400W CW** - **500W PEP** ✔ Suitable for most amateur radio setups --- ## 🧲 Quality Construction - **FlexWeave copper wire** - Durable and flexible - Built for outdoor use --- ## 🔌 Ready to Connect - **SO-239 connector** - Direct coax connection - No complex matching required --- ## 🇬🇧 Made in Great Britain ✔ Quality UK manufacturing ✔ Reliable performance --- ## Key Features - End-fed long wire antenna - 9:1 UNUN included - Covers 40m to 6m bands - 10m wire length - Flexible installation options - 50 Ohm coax feed - UK made --- ## Technical Specifications - **Type:** End-fed wire antenna - **Frequency Range:** 7 – 52 MHz - **Bands:** 40m – 6m - **Power Handling:** 400W CW / 500W PEP - **Impedance:** 50 Ohm - **Connector:** SO-239 - **Length:** 10 metres - **Material:** FlexWeave copper wire --- ## Why Choose the LWHF-40? ✔ Covers multiple HF bands with one antenna ✔ Easy to install and flexible ✔ Great for limited space setups ✔ Reliable UK build quality --- ## Ideal For - Amateur radio operators - Portable HF setups - Garden installations - Multi-band operation with ATU --- ## Straight Talking If you want a **simple, multi-band HF antenna that works in almost any space**, this is a solid, no-fuss solution. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range20.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/lwhf-40-hf-vhf-40-6m-multi-band-ham-radio-long-wire-antenna-aerial-lw10/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/lwhf-40-hf-vhf-40-6m-multi-band-ham-radio-long-wire-antenna-aerial-lw10/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/lwhf-40-hf-vhf-40-6m-multi-band-ham-radio-long-wire-antenna-aerial-lw10/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/lwhf-40-hf-vhf-40-6m-multi-band-ham-radio-long-wire-antenna-aerial-lw10/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20LWHF-40%20hf%20vhf%2040%206m%20multiband%20long%20wire&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flwhf-40-hf-vhf-40-6m-multi-band-ham-radio-long-wire-antenna-aerial-lw10%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/lwhf-40-hf-vhf-40-6m-multi-band-ham-radio-long-wire-antenna-aerial-lw10/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/lwhf-40-hf-vhf-40-6m-multi-band-ham-radio-long-wire-antenna-aerial-lw10/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/lwhf-40-hf-vhf-40-6m-multi-band-ham-radio-long-wire-antenna-aerial-lw10/?share=telegram) - **Product categories:** Amateur Radio Aerials --- ### [Astatic 636L Noise Cancelling CB Radio Mic](https://cbradio.co.uk/product/astatic-636l-rubberised-noise-cancelling-cb-radio-tear-drop-mic/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Astatic 636L Microphone** is one of the most **trusted and widely used noise-cancelling microphones** in the CB and amateur radio world. Built with a rugged **tear-drop design and legendary dynamic element**, the 636L delivers **clear, punchy audio even in the noisiest environments**. --- ## 🔊 Legendary Noise Cancelling Performance ✔ Designed for **close-talk operation** ✔ Reduces **engine, road and wind noise** ✔ Clear, strong audio transmission Perfect for trucks, 4x4s and noisy environments. --- ## 🎤 Proven Dynamic Element - Famous **636L dynamic noise-cancelling element** - Excellent voice clarity - Ideal for **CB, SSB and amateur radio use** --- ## 💪 Heavy Duty Build Quality - Rugged **Cycolac housing** - **Steel grill with polyurethane coating** - Soft vinyl lip guard for comfort - Built to withstand daily use --- ## 🔌 Wide Compatibility - Supplied with **4-pin plug** (Cobra, Uniden, Galaxy etc.) - Can be rewired for **3, 4, 5 or 6-pin radios** ✔ Works with most CB and ham radios --- ## 📏 Long Coiled Cable - Heavy-duty coil cord - Extends up to **7.5 feet (approx. 2.3m)** - Flexible and durable --- ## 🎯 Designed for Real-World Use - Ideal for mobile setups - Great in noisy cabs and vehicles - Trusted by professional drivers --- ## Key Features - Dynamic noise-cancelling microphone - Close-talk design - Heavy-duty construction - 4-pin plug (rewire compatible) - Long coiled cable - Classic tear-drop style --- ## Technical Specifications - **Frequency Response:** 100 – 5000 Hz - **Output Level:** -56 dB - **Impedance:** 400 Ohms (matches 50–1000 Ohms) - **Cable Length:** Up to 7.5 ft (coiled) --- ## Why Choose the 636L? ✔ Proven, industry-standard microphone ✔ Excellent noise rejection ✔ Built to last ✔ Works with most radios --- ## Ideal For - CB radio users - HGV and truck drivers - Amateur radio operators - Noisy vehicle environments --- ## Straight Talking If you want **clear audio without background noise**, this is one of the safest bets you can buy. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/astatic-636l-rubberised-noise-cancelling-cb-radio-tear-drop-mic/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/astatic-636l-rubberised-noise-cancelling-cb-radio-tear-drop-mic/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/astatic-636l-rubberised-noise-cancelling-cb-radio-tear-drop-mic/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/astatic-636l-rubberised-noise-cancelling-cb-radio-tear-drop-mic/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Astatic%20636L%20Noise%20Cancelling%20CB%20Radio%20Mic&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fastatic-636l-rubberised-noise-cancelling-cb-radio-tear-drop-mic%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/astatic-636l-rubberised-noise-cancelling-cb-radio-tear-drop-mic/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/astatic-636l-rubberised-noise-cancelling-cb-radio-tear-drop-mic/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/astatic-636l-rubberised-noise-cancelling-cb-radio-tear-drop-mic/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [10m f-zero high quality low loss coax cable](https://cbradio.co.uk/product/f-zero-10m-high-quality-low-loss-coax-feeder-formula-zero-rg213/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Formula Zero Low Loss Coax Cable** is a **professional-grade 50 Ohm coaxial cable** designed for **minimal signal loss and maximum performance**. Built with a **solid copper core, copper foil and copper braid shielding**, it delivers exceptional efficiency across CB, amateur radio and RF applications. --- ## ⚡ Ultra Low Loss Performance Designed to get as close to **“zero loss” as possible**, this cable ensures: ✔ Stronger transmitted signal ✔ Improved receive sensitivity ✔ Reduced power loss over distance --- ## 🧲 High Quality Construction - **Solid copper inner conductor (2.72mm)** - Copper foil + copper braid shielding (**100% coverage**) - Durable outer jacket (10.2mm diameter) ✔ Maximum signal integrity with minimal interference --- ## 📡 Wide RF Application Range Suitable for: - CB radio systems - Amateur (ham) radio - Base station installations - RF and broadcast applications - Video signal transmission --- ## 🔧 Professional Grade Specification - **Impedance:** 50 Ohm - **Velocity Factor:** 0.818 - **Outer Diameter:** 10.2 mm ✔ Ideal for serious installations --- ## 📉 Insertion Loss (Per 100m) - 5 MHz → **0.78 dB** - 10 MHz → **1.4 dB** - 30 MHz → **2.35 dB** - 50 MHz → **2.92 dB** - 100 MHz → **4.5 dB** - 200 MHz → **6.32 dB** - 400 MHz → **9.87 dB** - 1000 MHz → **16.71 dB** ✔ Excellent low-loss performance across a wide frequency range --- ## 🔁 Equivalent to Premium Cable Types - Comparable to **Westflex / low-loss RF cables** - High-end performance without premium pricing --- ## Key Features - Low loss 50 Ohm coax cable - Solid copper core - Double shielding (foil + braid) - Professional RF performance - Suitable for CB & ham radio - 10.2mm heavy-duty cable --- ## Why Choose Formula Zero? ✔ Maximise your signal strength ✔ Reduce losses over long runs ✔ High-quality materials throughout ✔ Ideal for serious setups --- ## Ideal For - Base station installations - Long cable runs - High-performance CB systems - Amateur radio operators --- ## Straight Talking Your system is only as good as your cable — this is the kind of coax you use when you **don’t want to lose performance**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/f-zero-10m-high-quality-low-loss-coax-feeder-formula-zero-rg213/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/f-zero-10m-high-quality-low-loss-coax-feeder-formula-zero-rg213/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/f-zero-10m-high-quality-low-loss-coax-feeder-formula-zero-rg213/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/f-zero-10m-high-quality-low-loss-coax-feeder-formula-zero-rg213/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2010m%20f-zero%20high%20quality%20low%20loss%20coax%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ff-zero-10m-high-quality-low-loss-coax-feeder-formula-zero-rg213%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/f-zero-10m-high-quality-low-loss-coax-feeder-formula-zero-rg213/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/f-zero-10m-high-quality-low-loss-coax-feeder-formula-zero-rg213/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/f-zero-10m-high-quality-low-loss-coax-feeder-formula-zero-rg213/?share=telegram) - **Product categories:** F-Zero (Westflex) --- ### [Large Dog-bone insulator for long wire antenna](https://cbradio.co.uk/product/large-dog-bone-insulator-for-long-wire-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Extra Large Dogbone Insulator** is a heavy-duty end insulator designed for **longwire and dipole antenna installations**. Built to handle high power and outdoor conditions, these insulators are a **reliable choice for amateur radio and CB setups**. --- ## 🔧 Heavy Duty Construction ✔ Designed for **high strength and durability** ✔ Suitable for outdoor use ✔ Built to withstand tension from long wire runs --- ## 📡 Ideal for Wire Antenna Systems - Perfect for **longwire antennas** - Suitable for **dipole antenna builds** - Helps isolate the antenna wire from supports ✔ Essential for proper antenna performance --- ## ⚡ High Power Handling - Supports up to **1000 Watts** - Suitable for high-power transmission setups - Reliable performance under load --- ## 📏 Large Size for Better Strength - **Length:** 11 cm - **Width:** 3.5 cm - Extra-large design for improved durability and spacing --- ## 📦 Pack Includes - 1x Extra Large Dogbone Insulator --- ## Key Features - Heavy duty antenna insulators - Suitable for longwire & dipole antennas - 1000W power handling - Large size for strength and spacing - Outdoor ready --- ## Why Choose These Insulator? ✔ Strong and reliable ✔ Ideal for high-power setups ✔ Simple but essential antenna component ✔ Great value --- ## Ideal For - Amateur radio operators - CB base station setups - Longwire antenna installations - DIY antenna builds --- ## Straight Talking Simple but important — if you’re building a **proper wire antenna setup**, you need good insulator like these. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/large-dog-bone-insulator-for-long-wire-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/large-dog-bone-insulator-for-long-wire-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/large-dog-bone-insulator-for-long-wire-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/large-dog-bone-insulator-for-long-wire-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Large%20Dog-bone%20insulator%20for%20long%20wire%20antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flarge-dog-bone-insulator-for-long-wire-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/large-dog-bone-insulator-for-long-wire-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/large-dog-bone-insulator-for-long-wire-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/large-dog-bone-insulator-for-long-wire-antenna/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [2x Large Dog-bone insulator long wire / g5rv](https://cbradio.co.uk/product/2x-large-dog-bone-insulator-for-long-wire-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **Extra Large Dogbone Insulators (2 Pack)** are heavy-duty end insulators designed for **longwire and dipole antenna installations**. Built to handle high power and outdoor conditions, these insulators are a **reliable choice for amateur radio and CB setups**. --- ## 🔧 Heavy Duty Construction ✔ Designed for **high strength and durability** ✔ Suitable for outdoor use ✔ Built to withstand tension from long wire runs --- ## 📡 Ideal for Wire Antenna Systems - Perfect for **longwire antennas** - Suitable for **dipole antenna builds** - Helps isolate the antenna wire from supports ✔ Essential for proper antenna performance --- ## ⚡ High Power Handling - Supports up to **1000 Watts** - Suitable for high-power transmission setups - Reliable performance under load --- ## 📏 Large Size for Better Strength - **Length:** 11 cm - **Width:** 3.5 cm - Extra-large design for improved durability and spacing --- ## 📦 Pack Includes - 2 × Extra Large Dogbone Insulators --- ## Key Features - Heavy duty antenna insulators - Suitable for longwire & dipole antennas - 1000W power handling - Large size for strength and spacing - Outdoor ready --- ## Why Choose These Insulators? ✔ Strong and reliable ✔ Ideal for high-power setups ✔ Simple but essential antenna component ✔ Great value twin pack --- ## Ideal For - Amateur radio operators - CB base station setups - Longwire antenna installations - DIY antenna builds --- ## Straight Talking Simple but important — if you’re building a **proper wire antenna setup**, you need good insulators like these. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/2x-large-dog-bone-insulator-for-long-wire-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/2x-large-dog-bone-insulator-for-long-wire-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/2x-large-dog-bone-insulator-for-long-wire-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/2x-large-dog-bone-insulator-for-long-wire-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%202x%20Large%20Dog-bone%20insulator%20long%20wire%20%2F%20g5rv&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F2x-large-dog-bone-insulator-for-long-wire-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/2x-large-dog-bone-insulator-for-long-wire-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/2x-large-dog-bone-insulator-for-long-wire-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/2x-large-dog-bone-insulator-for-long-wire-antenna/?share=telegram) - **Product categories:** Amateur Radio Accessories --- ### [PNI Escort HP 9001 PRO CB radio uk eu](https://cbradio.co.uk/product/pni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w/) **Published:** October 25, 2020 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=9NAyShZ4hX8[/embed] **Content:** The **PNI Escort HP 9001 PRO CB Radio** is the upgraded version of the popular HP 9001, now featuring **12V / 24V compatibility** for use in both cars and trucks. Compact, easy to use and packed with essential features, it’s a **solid all-round CB radio for everyday communication across Europe**. --- ## 🚗 12V / 24V – Built for All Vehicles ✔ Works in **cars, vans and HGV trucks** ✔ Ideal for professional drivers ✔ Reliable power handling --- ## 🌍 Multi-Standard European Operation - **80 channels (40 UK + 40 EU)** - AM / FM operation - Adjustable output power (1W–4W depending on country) - Easily switch between country norms ✔ Perfect for cross-border use --- ## 🔊 Clear Audio & Noise Control - **ASQ (Auto Squelch)** - ANL noise filter - Stable, clear communication - Easy-to-use controls --- ## ⚙️ Practical Everyday Features - Dual Watch (monitor two channels) - Channel scan - Memory function (MEM) - Keypad lock - Emergency channels **9 / 19** --- ## 🎨 Multi-Colour Display - **7 selectable display colours** - Clear backlit screen - Customise to match your dashboard --- ## 📏 Compact & Easy to Install - Small, space-saving design - Fits easily into modern dashboards - Quick and simple setup --- ## Key Features - AM / FM CB radio - 80 channels (UK + EU) - 12V / 24V compatible - Multi-standard operation - ASQ + ANL noise filtering - Dual Watch & scan - Multi-colour display --- ## What’s in the Box? - PNI HP 9001 PRO CB radio - Microphone - Mounting bracket - Power cable - User manual --- ## Why Choose the HP 9001 PRO? ✔ Reliable and easy to use ✔ Works across Europe ✔ Compact and practical ✔ Now supports 24V systems --- ## Ideal For - Cars, vans and trucks - European travel - Everyday CB users - Drivers wanting simple, reliable communication --- ## Straight Talking If you want a **no-fuss CB radio that just works — in any vehicle and any country**, this is a great choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%209001%20PRO%20CB%20radio%20uk%20eu&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-escort-hp-9001-pro-cb-radio-am-fm-12v-24v-4w/?share=telegram) - **Product categories:** PNI --- ### [PNI Escort HP 55 ASQ CB radio UK EU Hide Away](https://cbradio.co.uk/product/pni-escort-hp-55-asq-cb-radio-multi-norm-uk-27-81-eu-hide-away/) **Published:** September 16, 2021 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=_Q1mYP0daDc[/embed] **Content:** The **PNI Escort HP 55 CB Radio** is one of the most compact CB systems available — with **all controls built directly into the microphone**. This clever design allows you to **hide the radio unit completely**, keeping your dashboard clean while still having full control via the **large LCD microphone display**. --- ## 🎤 All-in-One Microphone Control ✔ Full control directly on the microphone ✔ Large LCD display for easy operation ✔ Change channels and settings without touching the main unit Perfect for modern, discreet installations. --- ## 🚗 Ultra-Compact Hidden Install - Tiny radio body: **120 x 110 x 27 mm** - Mount the unit out of sight - Keep only the microphone visible ✔ Ideal for cars, vans and trucks --- ## 🌍 Multi-Standard European Operation - 40 channels AM / FM - Selectable frequency tables and country norms - Suitable for use across Europe --- ## 🔊 Advanced Audio & Noise Control - **RF Gain (9 levels)** - Manual squelch (28 levels) - **ASQ automatic squelch (5 levels)** - Built-in noise reduction ✔ Clear communication even in busy environments --- ## ⚙️ Smart Features - Dual Watch (monitor two channels) - Channel scan - Keypad lock - Emergency channel access - SWR meter built-in --- ## 🎨 Customisable Display - **7-colour LCD display (on microphone)** - Adjustable key light and sound - Personalise to suit your setup --- ## 🔧 Additional Functions - Menu system via microphone (F key) - Roger Beep - Time Out Timer (TOT) - External speaker connection - 2-pin Kenwood accessory compatibility --- ## Key Features - All controls in microphone - AM / FM CB radio - Multi-standard operation - Compact hidden unit - RF Gain & ASQ - SWR meter - Dual Watch & scan - Multi-colour display --- ## Technical Specifications - **Frequency Range:** 26.965 – 27.405 MHz - **Channels:** 40 - **Modes:** AM / FM - **Output Power:** 4W - **Audio Output:** 3W - **Sensitivity:** 0.25 µV - **Power Supply:** 13.2V - **Dimensions:** 120 x 110 x 27 mm - **Weight:** 617 g --- ## What’s in the Box? - PNI HP 55 radio unit - Microphone with display & controls - Mounting bracket & screws - Microphone holder - Power cable with lighter plug - User manual --- ## Why Choose the HP 55? ✔ Ultra-clean installation ✔ Easy one-handed control ✔ Compact yet feature-rich ✔ Great for modern vehicles --- ## Ideal For - Discreet installs - Cars and vans - Drivers wanting minimal dashboard clutter - Everyday CB users --- ## Straight Talking If you want a **tidy install with everything controlled from the mic**, this is one of the smartest CB setups available. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-escort-hp-55-asq-cb-radio-multi-norm-uk-27-81-eu-hide-away/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-escort-hp-55-asq-cb-radio-multi-norm-uk-27-81-eu-hide-away/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-escort-hp-55-asq-cb-radio-multi-norm-uk-27-81-eu-hide-away/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-escort-hp-55-asq-cb-radio-multi-norm-uk-27-81-eu-hide-away/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%2055%20ASQ%20CB%20radio%20UK%20EU%20Hide%20Away&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-escort-hp-55-asq-cb-radio-multi-norm-uk-27-81-eu-hide-away%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-escort-hp-55-asq-cb-radio-multi-norm-uk-27-81-eu-hide-away/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-escort-hp-55-asq-cb-radio-multi-norm-uk-27-81-eu-hide-away/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-escort-hp-55-asq-cb-radio-multi-norm-uk-27-81-eu-hide-away/?share=telegram) - **Product categories:** PNI --- ### [TTi TCB 881 12/24v Mobile CB radio](https://cbradio.co.uk/product/tti-tcb-881-12-24v-mobile-cb-radio/) **Published:** September 19, 2021 **Author:** Jan **Content:** The **TTI TCB-881N CB Radio** is a versatile, multi-standard mobile CB designed for **clear communication across the UK and Europe**. With a **compact body, upgraded PCB and Dynamic Squelch System (DSS)**, it delivers **clean audio, strong performance and flexible installation** in both cars and trucks. --- ## 🌍 Multi-Standard European Operation ✔ Works across multiple EU bands including: UK / CEPT / Germany / France / Spain / Italy / Poland ✔ Ideal for drivers travelling across Europe ⚠️ *When operating in the UK, use UK / UE / EC bands only* --- ## 🚗 Compact & Easy to Install - Updated **shorter body design** - Fits easily into most dashboards - Suitable for cars, vans and trucks - Clean, simple installation --- ## 🔊 Dynamic Squelch System (DSS) - Automatically reduces background noise - Improves clarity of received signals - Less manual adjustment needed ✔ Clearer conversations on busy channels --- ## ⚙️ Feature-Packed Performance - **4W output power (AM/FM)** - Dual Watch (monitor two channels) - Channel scan - 4 programmable memory channels - Quick channel up/down - Emergency channels **9 / 19** --- ## 🎛 Advanced Audio Control - **RF Gain control** - **Mic Gain control** - Manual squelch + DSS - ANL noise filter - Local / DX selector --- ## 🔧 Practical Functions - Keypad lock - Backlight dimmer - Time Out Timer (TOT) - Beep tone control - CB / PA mode selection --- ## 🔌 Connectivity - External speaker connection - External S-meter connection - SO-239 antenna connector --- ## Key Features - Multi-standard CB radio - AM / FM modes - 12V / 24V compatible - DSS noise reduction - Dual Watch & scan - RF & Mic Gain control - Compact mobile design --- ## Technical Specifications **General** - **Channels:** Multi-standard (UK + EU bands) - **Frequency Range:** 26.965 – 27.99125 MHz - **Power Supply:** 12V / 24V DC - **Dimensions:** 156 x 135 x 51 mm - **Weight:** 990 g **Transmitter** - **Output Power:** 4W - **Modulation:** AM (85–95%) / FM (±1.8 kHz) - **Current:** 1.6A max **Receiver** - **Sensitivity:** - AM: 0.7 µV - FM: 0.5 µV - **Audio Output:** 4W - **Selectivity:** 60 dB --- ## Why Choose the TCB-881N? ✔ Reliable multi-standard operation ✔ Compact design with strong performance ✔ Clear audio with DSS noise reduction ✔ Great all-round CB for UK & EU use --- ## Ideal For - HGV drivers - European travel - Cars and vans - Everyday CB users --- ## Straight Talking If you want a **reliable, no-nonsense CB radio that works across Europe**, this is a solid, proven choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/tti-tcb-881-12-24v-mobile-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/tti-tcb-881-12-24v-mobile-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/tti-tcb-881-12-24v-mobile-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/tti-tcb-881-12-24v-mobile-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20TTi%20TCB%20881%2012%2F24v%20Mobile%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftti-tcb-881-12-24v-mobile-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/tti-tcb-881-12-24v-mobile-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/tti-tcb-881-12-24v-mobile-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/tti-tcb-881-12-24v-mobile-cb-radio/?share=telegram) - **Product categories:** TTi --- ### [PNI Escort HP 9700 cb radio UK40 EU40](https://cbradio.co.uk/product/pni-escort-hp-9700-usb-12v-24v-cigarette-lighter-plug-uk-40-eu-40-multimode/) **Published:** September 19, 2021 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=MLPDrfqUOok[/embed] **Content:** The **PNI Escort HP 9700 CB Radio** is a compact, modern CB radio designed for **clean installations and enhanced control over your communication**. With **DIN mounting capability, adjustable RF gain, noise filtering and a front USB port**, it’s a great choice for users wanting **more features without going overly complex**. --- ## 🚗 Clean DIN Installation ✔ **1 DIN compatible** – fits standard radio slots ✔ Compact size: **115 x 150 x 38 mm** ✔ Ideal for cars, vans and trucks ✔ Supplied with mounting bracket --- ## 🌍 UK & EU CB Operation - **40 UK + 40 EU channels** - AM / FM operation - Covers **26.965 – 27.405 MHz** - Ready for everyday CB use --- ## 🔊 Advanced Audio & Noise Control - **RF Gain (9 levels)** – fine-tune reception - **ASQ (5 levels)** – automatic squelch - Manual squelch (28 levels) - **ANC noise filter** for cleaner audio ✔ Helps reduce background noise and improve clarity --- ## ⚙️ Practical Features - Channel scan - Emergency channel access - Keypad lock - Reliable everyday operation --- ## 🎨 Clear Blue Display - Bright **blue backlit LCD screen** - Easy-to-read channel and signal info - Modern look for dashboard installs --- ## 🔌 Added Connectivity - **Front USB port** (device charging) - External speaker connection - 6-pin microphone --- ## Key Features - AM / FM CB radio - 40 UK + 40 EU channels - 12V / 24V operation - DIN mount compatible - RF Gain & ASQ control - ANC noise filtering - Scan function - Front USB port --- ## Technical Specifications - **Frequency Range:** 26.965 – 27.405 MHz - **Channels:** 40 - **Modes:** AM / FM - **Output Power:** 4W - **Sensitivity:** >1 µV - **Power Supply:** 12V / 24V - **Dimensions:** 115 x 150 x 38 mm - **Weight:** 0.8 kg - **Operating Temp:** -26°C to +60°C --- ## What’s in the Box? - PNI HP 9700 CB radio - Microphone - Mounting bracket & screws - Microphone holder - Power cable with lighter plug - User manual --- ## Why Choose the HP 9700? ✔ Clean DIN install ✔ Good control over reception ✔ Useful extras like USB charging ✔ Solid mid-range CB option --- ## Ideal For - Cars, vans and trucks - Clean dashboard installs - Everyday CB users - Drivers wanting extra control over audio --- ## Straight Talking If you want a **modern DIN CB radio with useful extras and better control than basic models**, this is a strong choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-escort-hp-9700-usb-12v-24v-cigarette-lighter-plug-uk-40-eu-40-multimode/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-escort-hp-9700-usb-12v-24v-cigarette-lighter-plug-uk-40-eu-40-multimode/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-escort-hp-9700-usb-12v-24v-cigarette-lighter-plug-uk-40-eu-40-multimode/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-escort-hp-9700-usb-12v-24v-cigarette-lighter-plug-uk-40-eu-40-multimode/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%209700%20cb%20radio%20UK40%20EU40&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-escort-hp-9700-usb-12v-24v-cigarette-lighter-plug-uk-40-eu-40-multimode%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-escort-hp-9700-usb-12v-24v-cigarette-lighter-plug-uk-40-eu-40-multimode/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-escort-hp-9700-usb-12v-24v-cigarette-lighter-plug-uk-40-eu-40-multimode/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-escort-hp-9700-usb-12v-24v-cigarette-lighter-plug-uk-40-eu-40-multimode/?share=telegram) - **Product categories:** PNI --- ### [PNI Escort HP 8900 CB Radio UK40 eu40](https://cbradio.co.uk/product/pni-escort-hp-8900-asq-radio-station-12v-24v-rf-gain-roger-beep-ctcss-d/) **Published:** September 19, 2021 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=inXyZPcro0c[/embed] **Content:** The **PNI Escort HP 8900 CB Radio** is a modern, feature-rich CB radio designed for users who want **more control, better filtering and added functionality** than entry-level models. With **CTCSS/DCS support, adjustable ASQ and DIN mounting capability**, it’s a versatile choice for both mobile and base setups. --- ## 🚗 Flexible Installation ✔ **1 DIN compatible** – fits standard radio slots ✔ Suitable for cars, vans and trucks ✔ Supplied with mounting bracket ✔ Can also be used as a base unit --- ## 🌍 Standard CB Performance - **40 channels AM/FM** - Frequency: **26.965 – 27.405 MHz** - 4W output power (legal standard) - Stable, clear communication --- ## 🔊 Advanced Audio & Noise Control - **ASQ (Auto Squelch)** – adjustable (9 levels) - Manual squelch (28 levels) - **RF Gain control (9 levels)** - Noise filters: - **NB (Noise Blanker)** - **HI-CUT** ✔ Fine-tune reception exactly how you want it --- ## 🎛 More Control with CTCSS / DCS - Built-in **CTCSS/DCS encoder & decoder** - Enables selective communication - Reduces unwanted chatter on busy channels --- ## ⚙️ Feature-Rich Operation - **Dual Watch** - Channel scan - Channel memory (EEPROM) - Roger Beep - Keypad lock - Emergency channel access - Time Out Timer (TOT) - Automatic power-on --- ## 🎨 Clear Display & Interface - Blue backlit LCD display - Signal meter (S-meter) - Built-in **SWR meter** - Easy-to-read layout --- ## 🔌 Connectivity - External speaker output - Headphone connection - 6-pin microphone - Cigarette lighter power lead included --- ## Key Features - AM / FM CB radio - 12V / 24V operation - DIN mount compatible - CTCSS / DCS support - Adjustable ASQ & RF Gain - SWR meter built-in - Scan & Dual Watch - Blue LCD display --- ## Technical Specifications - **Frequency Range:** 26.965 – 27.405 MHz - **Channels:** 40 - **Modes:** AM / FM - **Output Power:** 4W - **Audio Output:** 3W - **Sensitivity:** 0.25 µV - **Power Supply:** 12V / 24V - **Dimensions:** 122 x 130 x 37 mm - **Weight:** 660 g --- ## What’s in the Box? - PNI HP 8900 CB radio - Microphone - Mounting bracket & screws - Microphone holder - Power cable with lighter plug - User manual --- ## Why Choose the HP 8900? ✔ More features than basic CB radios ✔ Fine control over audio and reception ✔ DIN mount for clean installs ✔ Excellent value for a feature-rich unit --- ## Ideal For - Cars, vans and trucks - Users wanting more control than entry-level radios - Busy channel environments - Everyday and regular CB users --- ## Straight Talking If you want a **step up from basic radios with more control and filtering**, this is a very solid choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-escort-hp-8900-asq-radio-station-12v-24v-rf-gain-roger-beep-ctcss-d/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-escort-hp-8900-asq-radio-station-12v-24v-rf-gain-roger-beep-ctcss-d/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-escort-hp-8900-asq-radio-station-12v-24v-rf-gain-roger-beep-ctcss-d/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-escort-hp-8900-asq-radio-station-12v-24v-rf-gain-roger-beep-ctcss-d/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%208900%20CB%20Radio%20UK40%20eu40&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-escort-hp-8900-asq-radio-station-12v-24v-rf-gain-roger-beep-ctcss-d%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-escort-hp-8900-asq-radio-station-12v-24v-rf-gain-roger-beep-ctcss-d/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-escort-hp-8900-asq-radio-station-12v-24v-rf-gain-roger-beep-ctcss-d/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-escort-hp-8900-asq-radio-station-12v-24v-rf-gain-roger-beep-ctcss-d/?share=telegram) - **Product categories:** PNI --- ### [JOPIX GS-60 CB Radio Big display EU/UK](https://cbradio.co.uk/product/jopix-gs-60-mobile-cb-radio-big-display-eu-uk-multistandard-am-fm-12-24-volts/) **Published:** September 19, 2021 **Author:** Jan **Content:** The **Jopix GS-60 CB Radio** is a modern mobile CB radio designed for **clear visibility, simple operation and reliable performance**. With its **large multi-colour display, 12/24V compatibility and strong feature set**, it’s ideal for drivers who want a **clear, easy-to-read radio without stepping into complex setups**. --- ## 📺 Massive Easy-to-Read Display ✔ Large, clear LCD screen ✔ **7 selectable colours** ✔ Easy visibility in all lighting conditions ✔ Perfect for quick glance use while driving --- ## 🚗 Built for Cars & Trucks - **12V / 24V compatible** - Suitable for cars, vans and HGVs - Simple installation with included bracket --- ## 📡 Reliable CB Performance - **40 channels AM/FM** - 4W output power (legal CB standard) - Covers standard CB band (26.965 – 27.405 MHz) --- ## 🔊 Advanced Audio Control - **ASQ (Automatic Squelch)** + manual adjustment - RF Gain control - Local/DX switch - Noise filters: - **ANL** - **NB** - **HI-CUT** ✔ Clear communication even in noisy environments --- ## ⚙️ Useful Everyday Features - Channel scan - Emergency channels **9 / 19** - Roger Beep - Keypad lock - Time Out Timer (TOT) - Adjustable ASQ levels --- ## 🔌 Connectivity - External speaker connection - 6-pin microphone - Supplied with power cable --- ## Key Features - AM / FM CB radio - Large multi-colour display - 12V / 24V operation - RF Gain & ASQ - Noise filters (ANL/NB/HI-CUT) - Scan function - Emergency channel access --- ## Technical Specifications - **Frequency Range:** 26.965 – 27.405 MHz - **Channels:** 40 - **Modes:** AM / FM - **Output Power:** 4W - **Sensitivity:** 1 µV - **Audio Output:** 2W - **Power Supply:** 12V / 24V - **Current:** Max 3A - **Operating Temp:** -26°C to +55°C --- ## What’s in the Box? - Jopix GS-60 CB radio - Microphone - Mounting bracket - Power cable --- ## Why Choose the GS-60? ✔ Large display for easy use ✔ Good balance of features and simplicity ✔ Strong noise filtering ✔ Ideal for everyday drivers --- ## Ideal For - Cars, vans and trucks - Drivers wanting a clear display - Beginners and regular users - Everyday communication --- ## Straight Talking If you struggle with small displays, this is a **big improvement — simple, clear and easy to use**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/jopix-gs-60-mobile-cb-radio-big-display-eu-uk-multistandard-am-fm-12-24-volts/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/jopix-gs-60-mobile-cb-radio-big-display-eu-uk-multistandard-am-fm-12-24-volts/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/jopix-gs-60-mobile-cb-radio-big-display-eu-uk-multistandard-am-fm-12-24-volts/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/jopix-gs-60-mobile-cb-radio-big-display-eu-uk-multistandard-am-fm-12-24-volts/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20JOPIX%20GS-60%20CB%20Radio%20Big%20display%20EU%2FUK&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fjopix-gs-60-mobile-cb-radio-big-display-eu-uk-multistandard-am-fm-12-24-volts%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/jopix-gs-60-mobile-cb-radio-big-display-eu-uk-multistandard-am-fm-12-24-volts/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/jopix-gs-60-mobile-cb-radio-big-display-eu-uk-multistandard-am-fm-12-24-volts/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/jopix-gs-60-mobile-cb-radio-big-display-eu-uk-multistandard-am-fm-12-24-volts/?share=telegram) - **Product categories:** Jopix --- ### [Inrico S300 ultra thin smart 4G big display network radio](https://cbradio.co.uk/product/inrico-s300-ultra-thin-smart-4g-big-display-network-radio/) **Published:** September 21, 2021 **Author:** Jan **Content:** The **Inrico S300 Network Radio** is a next-generation **4G / WiFi Push-To-Talk (PoC) radio**, combining the power of a smartphone with the reliability of a two-way radio. With a **large touchscreen, Android OS and nationwide coverage via mobile networks**, it’s ideal for professional users who need **instant communication without range limitations**. --- ## 🌐 Unlimited Range Communication ✔ Uses **4G / LTE or WiFi networks** ✔ No distance limitations like traditional radios ✔ Communicate nationwide or worldwide (with network access) Perfect for modern business communication. --- ## 📱 Large 5” Touchscreen - **5.0” HD display** - Multi-touch interface - Easy app-based operation - Clear visibility in all conditions --- ## 📡 Full Connectivity - **4G LTE + 3G + GSM** - **Dual SIM support** - **WiFi (2.4GHz & 5GHz)** - **Bluetooth 4.0** Stay connected anywhere. --- ## 📍 Built-In GPS Tracking - GPS / GLONASS / A-GPS - Real-time location tracking - Ideal for fleet and team management --- ## 📷 Dual Camera System - **Rear camera:** 13MP (auto-focus) - **Front camera:** 5MP - Wide-angle lens Useful for reporting, security and field work. --- ## 💪 Rugged & Reliable - **IP67 waterproof & dustproof** - **MIL-STD-810G** compliant - Drop resistant (1.2m) - Built for harsh environments --- ## 🔋 Long Battery Life - **4600mAh battery** - Up to **13 hours communication time** - Up to **27 hours standby** --- ## 🔊 Audio & Hardware - Powerful **3W speaker** - Anti-interference microphone - Built-in LED flashlight - 3.5mm headset jack --- ## ⚙️ Android-Based Platform - **Android 8.1 OS** - Install PTT apps and software - Fully customisable system - Supports business communication platforms --- ## Key Features - 4G / WiFi PoC radio - Android touchscreen interface - GPS tracking - Dual SIM support - IP67 rugged design - Dual cameras - Long battery life - Bluetooth & WiFi --- ## Technical Specifications - **Display:** 5” HD Gorilla Glass 3 - **CPU:** Quad-core 1.5GHz - **Memory:** 2GB RAM / 16GB ROM (expandable) - **Battery:** 4600mAh - **Weight:** ~210g - **Dimensions:** 156.8 x 75.7 x 16 mm - **Operating Temp:** -5°C to +55°C --- ## Why Choose the S300? ✔ Unlimited communication range ✔ Modern smartphone-style interface ✔ Rugged for professional use ✔ Ideal for teams and businesses --- ## Ideal For - Security teams - Transport & logistics - Construction sites - Event management - Fleet communication --- ## Straight Talking This isn’t a traditional radio — it’s a **network-based communication system with no range limits**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/inrico-s300-ultra-thin-smart-4g-big-display-network-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/inrico-s300-ultra-thin-smart-4g-big-display-network-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/inrico-s300-ultra-thin-smart-4g-big-display-network-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/inrico-s300-ultra-thin-smart-4g-big-display-network-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Inrico%20S300%20ultra%20thin%20smart%204G%20big%20display%20network%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Finrico-s300-ultra-thin-smart-4g-big-display-network-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/inrico-s300-ultra-thin-smart-4g-big-display-network-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/inrico-s300-ultra-thin-smart-4g-big-display-network-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/inrico-s300-ultra-thin-smart-4g-big-display-network-radio/?share=telegram) - **Product categories:** Network radio, New Network Radio --- ### [Midland M-5 ultra compact cb radio 40UK 40EU](https://cbradio.co.uk/product/midland-m-5-ultra-compact-cb-radio-40-uk-40-eu-channels-am-fm-multi-standard/) **Published:** February 19, 2022 **Author:** Jan **Content:** The **Midland One-Hander CB Radio** is a clever, space-saving CB system where **all controls are built into the microphone**. This “one-hander” design allows you to **hide the main radio unit out of sight**, keeping your dashboard clean while still having full control at your fingertips. --- ## 🎤 All-in-One Microphone Control ✔ All controls integrated into the microphone ✔ Change channels, adjust settings and operate easily ✔ Keeps the main unit hidden Perfect for modern vehicles and discreet installs. --- ## 🚗 Clean & Flexible Installation - Hide the radio body under the dash or seat - Use the microphone as your control centre - Includes mounting bracket for flexible setup Ideal where space is limited. --- ## 🌍 Multi-Standard European Operation - **8 selectable country standards** - 40 channels AM / FM - Ready for use across Europe --- ## 🔊 Advanced Audio & Control - **Manual squelch (28 levels)** - **Digital squelch (5 levels)** - RF Gain adjustment - Clear TX/RX S-meter display --- ## 🎨 Multi-Colour Display - 7 selectable backlight colours - Easy-to-read display on microphone - Customise to match your dashboard --- ## ⚙️ Useful Features - Channel scan function - USB socket for charging devices - 2-pin Kenwood accessory socket - Sliding / tilting mounting bracket --- ## Key Features - All controls in microphone - AM / FM CB radio - 40 channels - Multi-standard (8 bands) - RF Gain & squelch control - Scan function - USB charging port - Compact hidden installation --- ## What’s in the Box? - Transceiver unit - Microphone with UP/DOWN controls - Mounting bracket & screws - Power cable with cigarette lighter plug - User manual --- ## Why Choose This Radio? ✔ Ultra-clean installation ✔ Easy one-handed operation ✔ Modern features in a compact setup ✔ Ideal for space-limited vehicles --- ## Ideal For - Modern cars and vans - Discreet installs - Drivers wanting minimal dashboard clutter - Everyday CB users --- ## Straight Talking If you want a **tidy install with everything controlled from the mic**, this is one of the smartest setups you can buy. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/midland-m-5-ultra-compact-cb-radio-40-uk-40-eu-channels-am-fm-multi-standard/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/midland-m-5-ultra-compact-cb-radio-40-uk-40-eu-channels-am-fm-multi-standard/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/midland-m-5-ultra-compact-cb-radio-40-uk-40-eu-channels-am-fm-multi-standard/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/midland-m-5-ultra-compact-cb-radio-40-uk-40-eu-channels-am-fm-multi-standard/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Midland%20M-5%20ultra%20compact%20cb%20radio%2040UK%2040EU&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmidland-m-5-ultra-compact-cb-radio-40-uk-40-eu-channels-am-fm-multi-standard%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/midland-m-5-ultra-compact-cb-radio-40-uk-40-eu-channels-am-fm-multi-standard/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/midland-m-5-ultra-compact-cb-radio-40-uk-40-eu-channels-am-fm-multi-standard/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/midland-m-5-ultra-compact-cb-radio-40-uk-40-eu-channels-am-fm-multi-standard/?share=telegram) - **Product categories:** Midland --- ### [President Teddy 2 plus Mobile CB Radio](https://cbradio.co.uk/product/president-teddy-ii-mobile-cb-radio/) **Published:** February 19, 2022 **Author:** Jan **Excerpt:** [embed]https://www.youtube.com/watch?v=Iaw3jXXOaPU[/embed] **Content:** The **President Teddy II+ CB Radio** is the upgraded successor to the popular Teddy II ASC — now featuring **12/24V compatibility and a 7-colour display**, while keeping the simplicity and reliability the President brand is known for. Compact, easy to use and built to last, it’s the perfect choice for drivers who want **quality without unnecessary complexity**. --- ## 🚗 Ultra-Compact & Easy to Install ✔ Small footprint: **125 x 151 x 45 mm** ✔ Fits easily into tight dashboards ✔ Ideal for cars, vans and trucks ✔ Clean, simple installation --- ## 🌍 Multi-Standard European Operation - 40 AM/FM channels - Fully programmable for use across Europe - Covers standard CB frequencies (26.965 – 27.405 MHz) --- ## 🔊 Legendary ASC Noise Reduction - **ASC (Automatic Squelch Control)** – patented by President - Automatically filters background noise - Combined with **ANL (Automatic Noise Limiter)** ✔ Clear, comfortable listening without constant adjustment --- ## 🎨 7-Colour Display - Customisable **multi-colour LCD display** - Clear, easy-to-read information - Adjustable to suit your dashboard lighting --- ## 🔧 Improved Features - **12V / 24V compatibility** (ideal for trucks) - **New noise blanker filter** for improved reception - External speaker connection - VOX microphone compatibility (optional) --- ## Key Features - AM / FM CB radio - 40 channels - 4W output power - ASC automatic squelch - ANL + Noise Blanker filters - 7-colour display - 12V / 24V operation - Ultra-compact design --- ## Technical Specifications **General** - **Frequency Range:** 26.965 – 27.405 MHz - **Modes:** AM / FM - **Power Supply:** 12V / 24V - **Dimensions:** 125 x 151 x 45 mm - **Weight:** 0.9 kg **Transmitter** - **Power Output:** 4W (AM/FM) - **Frequency Stability:** ±200 Hz - **Current:** 1.7A (with modulation) **Receiver** - **Sensitivity:** - AM: 0.5 µV - FM: 0.35 µV - **Audio Output:** 2.5W - **Selectivity:** 60 dB --- ## Why Choose the Teddy II+? ✔ Trusted **President build quality** ✔ Ultra-simple operation ✔ Excellent noise reduction (ASC) ✔ Compact and easy to install --- ## Ideal For - Everyday drivers - Cars, vans and trucks - Beginners and experienced users - Users wanting a reliable, no-fuss radio --- ## Straight Talking If you want a **small, reliable CB radio from a brand you can trust**, this is one of the safest choices out there. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-teddy-ii-mobile-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-teddy-ii-mobile-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-teddy-ii-mobile-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-teddy-ii-mobile-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20President%20Teddy%202%20plus%20Mobile%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-teddy-ii-mobile-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-teddy-ii-mobile-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-teddy-ii-mobile-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-teddy-ii-mobile-cb-radio/?share=telegram) - **Product categories:** President --- ### [JOPIX AP-6 CB AM/FM Transceiver 12/24v Din](https://cbradio.co.uk/product/jopix-ap-6-cb-am-fm-transceiver-12-24v-din/) **Published:** January 25, 2023 **Author:** Jan **Content:** The **Compact CB Radio Front Speaker VOX** is a modern, space-saving CB radio designed for **easy installation and clear audio performance**. With an **ultra-short 85mm depth, front-facing speaker and VOX hands-free control**, it’s ideal for vehicles where space is limited but usability still matters. --- ## 🚗 Designed for Tight Installations ✔ Ultra-compact depth: **only 85mm** ✔ Includes **DIN mounting bracket** ✔ Easy fit in dashboards or overhead consoles ✔ Ideal for cars, vans and trucks --- ## 🔊 Front Speaker Advantage - Built-in **front-facing speaker** - Clear audio directed towards the driver - Perfect for installs where rear speakers get muffled --- ## 🎤 VOX Hands-Free Control - **VOX function via microphone** - Transmit without pressing PTT - Safer and more convenient while driving --- ## 🌍 Multi-Standard Operation - 40 channels AM/FM (European bands) - Wide frequency capability (programmable/export range) - Suitable for UK and EU use --- ## 🎨 Multi-Colour Display - Large **backlit LCD display** - Multiple colour options - Easy-to-read in all lighting conditions --- ## ⚙️ Practical Features - Channel scan - Channel lock - Microphone with **UP/DOWN channel control** - Simple, intuitive operation --- ## Key Features - 12V / 24V compatible - AM / FM CB radio - VOX hands-free - Front speaker - DIN mount included - Multi-colour display - Compact design --- ## Technical Specifications - **Channels:** 40 AM/FM - **Frequency Range:** - Standard: 26.965 – 27.860 MHz - Expanded: 25.615 – 30.105 MHz - **Power Output:** 4W - **Power Supply:** 12V / 24V DC - **Dimensions:** 190 x 70 x 60 mm - **Depth:** 85 mm - **Weight:** 540 g --- ## Why Choose This Radio? ✔ Perfect for tight dashboard spaces ✔ Clear audio from front speaker ✔ Hands-free VOX operation ✔ Easy installation with DIN mount --- ## Ideal For - Trucks (24V systems) - Vans and modern vehicles - Space-limited installations - Drivers wanting a clean setup --- ## Straight Talking If space is tight and you want **something compact but still practical**, this ticks all the right boxes. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/jopix-ap-6-cb-am-fm-transceiver-12-24v-din/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/jopix-ap-6-cb-am-fm-transceiver-12-24v-din/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/jopix-ap-6-cb-am-fm-transceiver-12-24v-din/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/jopix-ap-6-cb-am-fm-transceiver-12-24v-din/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20JOPIX%20AP-6%20CB%20AM%2FFM%20Transceiver%2012%2F24v%20Din&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fjopix-ap-6-cb-am-fm-transceiver-12-24v-din%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/jopix-ap-6-cb-am-fm-transceiver-12-24v-din/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/jopix-ap-6-cb-am-fm-transceiver-12-24v-din/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/jopix-ap-6-cb-am-fm-transceiver-12-24v-din/?share=telegram) - **Product categories:** Jopix --- ### [Anytone Apollo II Mobile CB Radio](https://cbradio.co.uk/product/anytone-apollo-ii-mobile-cb-transceiver/) **Published:** January 25, 2023 **Author:** Jan **Content:** The **Anytone Apollo II CB Radio** is a modern, feature-packed mobile CB transceiver designed for users who want **advanced functionality, flexibility and a clean, compact install**. With a **full-colour TFT display, 12/24V compatibility and extensive customisation options**, the Apollo II is a serious upgrade over basic CB radios. --- ## 🚗 Compact, Modern Design ✔ Slim and compact: **124 x 163 x 39 mm** ✔ Durable **full alloy body** for heat dissipation ✔ Ideal for cars, vans and trucks ✔ Clean, modern installation --- ## 🌍 Multi-Standard European Operation - Covers UK & EU CB bands - AM / FM operation - Multi-norm compatibility Perfect for cross-border use. --- ## 🎨 TFT Colour Display - Bright **FTF/TFT LCD display** - Adjustable backlight - Clear channel and function visibility A modern interface compared to standard radios. --- ## 🎛 Advanced Features - **VOX hands-free operation** - **Dual Watch** (monitor two channels) - **Scan function** - **8 memory channels** - **Programmable Roger Beep** - **DTMF support** - **CH9/19 quick access** --- ## 🔊 Audio & Noise Control - **ASQ + Manual Squelch (adjustable thresholds)** - **RF Gain control** - **NB & HI-CUT filters** - Clear audio with up to **3W speaker output** --- ## ⚙️ Smart & Expandable - Programmable via software - Optional features: - Wireless microphone control - Smartphone app control - CTCSS / DCS Designed for flexibility and future expansion. --- ## Key Features - 12V / 24V operation - AM / FM CB radio - TFT colour display - VOX hands-free - Dual Watch & scan - RF Gain & noise filters - Programmable functions - Compact, modern design --- ## Technical Specifications **General** - **Frequency Range:** - FM: 26.565 – 27.99125 MHz - AM: 26.965 – 27.405 MHz - **Power Supply:** 12V / 24V - **Frequency Stability:** ±5 ppm - **Dimensions:** 124 x 163 x 39 mm - **Weight:** ~670 g **Transmitter** - **Output Power:** 4W (AM/FM) - **Impedance:** 50 Ohms - **Distortion:** < 5% **Receiver** - **Sensitivity:** < 1µV - **Audio Output:** 3W - **Image Rejection:** 70 dB --- ## What’s in the Box? - Anytone Apollo II radio - Microphone - Mounting bracket & hardware - Microphone hanger - Power lead with fuse - Non-slip mat --- ## Why Choose the Apollo II? ✔ Modern features in a compact unit ✔ Flexible installation options ✔ Strong audio and noise control ✔ Expandable and programmable --- ## Ideal For - Cars, vans and trucks - Drivers wanting more features than basic radios - Clean, modern installations - Regular CB users --- ## Straight Talking If you want a **modern CB radio with proper features and a clean display**, this is a big step up from entry-level models. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-apollo-ii-mobile-cb-transceiver/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-apollo-ii-mobile-cb-transceiver/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-apollo-ii-mobile-cb-transceiver/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-apollo-ii-mobile-cb-transceiver/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20Apollo%20II%20Mobile%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-apollo-ii-mobile-cb-transceiver%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-apollo-ii-mobile-cb-transceiver/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-apollo-ii-mobile-cb-transceiver/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-apollo-ii-mobile-cb-transceiver/?share=telegram) - **Product categories:** Anytone --- ### [Anytone AT-500M AM/FM CB27 cb radio](https://cbradio.co.uk/product/anytone-at-500m-am-fm-cb27-radio-with-iso-display/) **Published:** January 25, 2023 **Author:** Jan **Content:** The **Anytone AT-500M CB Radio** is a compact, feature-packed CB radio designed for **easy installation and reliable everyday communication**. Also known as the **CRT Alpha / Jopix GS60**, this model combines **modern features, ISO-style display and simple controls** in one solid unit. --- ## 🚗 Compact & Practical Design ✔ Compact size – ideal for tight dashboards ✔ ISO-style display for clean installation ✔ Easy-to-use controls ✔ Suitable for cars, vans and work vehicles --- ## 📡 Reliable CB Performance - **40 channels AM/FM** - 4W output power (legal standard) - Stable, clear communication - Designed for everyday use --- ## 🔊 Advanced Audio & Noise Control - **ASQ (Auto Squelch)** + Manual Squelch - **RF Gain adjustment** - **ANL / NB filters** for noise reduction - **Talkback (TALBAK)** – monitor your own audio --- ## 🎤 Hands-Free & Smart Features - **VOX voice control** (adjustable sensitivity & timing) - **Speed dial channels**: - CH9 (emergency) - CH19 (road use) - Last channel recall - Key lock function - Customisable key tones --- ## 🔧 Extra Functionality - **CTCSS / DCS selectors** - External speaker connection (3.5mm jack) - Backlit ISO LCD display --- ## Key Features - AM / FM CB radio - 40 channels - 4W output power - VOX hands-free - ASQ + manual squelch - RF Gain & noise filters - Talkback function - Compact, ISO-style design --- ## Technical Specifications - **Channels:** 40 - **Modes:** AM / FM - **Output Power:** 4W - **Power Supply:** 13.2V DC ±15% - **Display:** ISO-style LCD with backlight - **Antenna Connector:** SO-239 --- ## 🔁 Alternative Model If this model is out of stock, check out: - Jopix GS60 CB Radio ✔ Same radio platform ✔ Same features and performance --- ## Why Choose the AT-500M? ✔ Compact and easy to install ✔ Modern features without complexity ✔ Good audio control and clarity ✔ Excellent value for money --- ## Ideal For - Everyday drivers - Cars and vans - Beginner to intermediate users - Compact installations --- ## Straight Talking If you want a **compact CB radio with a few extra features over the basics**, this is a solid, reliable choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-at-500m-am-fm-cb27-radio-with-iso-display/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-at-500m-am-fm-cb27-radio-with-iso-display/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-at-500m-am-fm-cb27-radio-with-iso-display/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-at-500m-am-fm-cb27-radio-with-iso-display/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20AT-500M%20AM%2FFM%20CB27%20cb%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-at-500m-am-fm-cb27-radio-with-iso-display%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-at-500m-am-fm-cb27-radio-with-iso-display/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-at-500m-am-fm-cb27-radio-with-iso-display/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-at-500m-am-fm-cb27-radio-with-iso-display/?share=telegram) - **Product categories:** Anytone --- ### [Anytone DORIS Compact Mobile CB radio](https://cbradio.co.uk/product/anytone-doris-compact-mobile-cb-radio/) **Published:** January 25, 2023 **Author:** Jan **Content:** The **Anytone Doris CB Radio** is a modern, versatile CB transceiver designed for **flexible installation and everyday usability**. With a **large TFT colour display**, multi-standard operation and multiple mounting options, it’s ideal for drivers who want a **clean install without sacrificing features**. --- ## 🚗 Flexible Installation – Fit It Anywhere ✔ Mount on **windscreen (suction mount)** ✔ Place on **dashboard** ✔ Fit into a **DIN slot** ✔ All mounting accessories included Perfect for modern vehicles where space and layout matter. --- ## 🌍 Multi-Standard European Use - Covers **26.565 – 27.99125 MHz** - AM / FM operation - Works across UK and European CB bands Drive anywhere — stay connected. --- ## 🎨 Large TFT Colour Display - Bright, clear **colour screen** - Easy-to-read channel and function info - Excellent visibility in all lighting conditions A big upgrade over basic LCD radios. --- ## 🎛 Packed With Useful Features - **Dual Watch** – monitor two channels - **VOX hands-free operation** - **CTCSS / DCS** selective calling - **Roger Beep** - **Scan function (adjustable range)** - **Noise reduction system** - **Time Out Timer (TOT)** - **5K frequency step setting** - **PA (Public Address) function** --- ## 🔊 Reliable Communication - 4W output (legal CB standard) - Strong receive sensitivity - Clean audio with noise reduction - Stable PLL frequency control --- ## Key Features - 12V / 24V compatible - AM / FM CB radio - Multi-standard European bands - TFT colour display - VOX hands-free - Dual Watch - Scan and noise reduction - Multiple mounting options --- ## Technical Specifications **General** - **Frequency Range:** 26.565 – 27.99125 MHz - **Power Supply:** 12V / 24V - **Frequency Control:** PLL Synthesizer - **Operating Temp:** -20°C to +55°C **Transmitter** - **Output Power:** 4W - **Output Impedance:** 50 Ohms - **Distortion:** < 5% **Receiver** - **Sensitivity:** < 1µV - **Image Rejection:** 70 dB - **Adjacent Channel Rejection:** 60 dB - **Audio Output:** 1W --- ## Why Choose the Anytone Doris? ✔ Flexible mounting options ✔ Modern colour display ✔ Packed with practical features ✔ Ideal balance of simplicity and functionality --- ## Ideal For - Cars, vans and trucks - Clean dashboard installations - Everyday CB users - Drivers travelling across Europe --- ## Straight Talking If you want a **modern CB radio that fits anywhere and looks the part**, this is a solid all-round choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-doris-compact-mobile-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-doris-compact-mobile-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-doris-compact-mobile-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-doris-compact-mobile-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20DORIS%20Compact%20Mobile%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-doris-compact-mobile-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-doris-compact-mobile-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-doris-compact-mobile-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-doris-compact-mobile-cb-radio/?share=telegram) - **Product categories:** Anytone --- ### [CB radio handheld kit Mag mount CB Aerial](https://cbradio.co.uk/product/pni-hp62ac-cb-radio-hand-held-magnetic-cb-aerial-base-cb-kit/) **Published:** February 22, 2023 **Author:** Jan **Content:** The **PNI Escort HP 62 CB Radio** is a compact, versatile handheld CB that can also be used as a **mobile radio when paired with a vehicle adapter and external antenna**. This version is ideal for users who want a **portable unit with the option to use it properly in a vehicle setup**. --- ## ⚠️ Important – Please Read - ✔ **Powered via 12V car adapter (included)** - ❌ **No battery pack or charger included** - ✔ Designed for use with **external CB antenna for best performance** - Small handheld antenna = **limited range** --- ## 🚗 Handheld + Mobile in One ✔ Use as a **portable CB (limited range)** ✔ Plug into your vehicle for **full performance** ✔ Connect to an external antenna for best results A flexible solution for different situations. --- ## 📡 Full CB Performance (When Vehicle Mounted) - Standard **4W output power (AM/FM)** - Works like a regular CB when used with: - Car adapter - External antenna --- ## 🌍 Multi-Standard European Use - Adjustable frequency bands - Works across multiple EU countries - Easy band selection --- ## 🔊 Features & Functions - **Dual Watch** – monitor two channels - Channel scanning - Automatic & manual squelch - RF Gain (receiver sensitivity adjustment) - Signal strength indicator - Clear, backlit display --- ## 🔌 Vehicle Ready - Includes **cigarette lighter adapter** - Connect external CB antenna directly - Great for temporary or flexible installs --- ## 🎧 Accessory Compatible Supports accessories with **2-pin Midland/Alan type connection**, including: - Speaker microphones - Headsets - External speakers --- ## 📡 Included Compact Antenna The kit includes the **PNI Extra 48 CB Antenna**: - Compact size: **45cm** - Discreet, low-profile design - Up to **~10 km range (ideal conditions)** - Anti-noise design reduces wind interference Perfect for a clean, subtle install. --- ## Key Features - Handheld CB radio (27MHz) - AM / FM operation - 4W output power - Multi-standard European bands - Dual Watch - Scan function - RF Gain & squelch control - Car adapter included --- ## Why Choose This Kit? ✔ Flexible handheld + mobile use ✔ Better performance when used in vehicle ✔ Compact, easy-to-use setup ✔ Great value for money --- ## Ideal For - Beginners - Occasional CB users - Temporary vehicle setups - Backup communication --- ## Straight Talking On its own, it’s a **basic handheld**. With the car adapter and antenna, it becomes a **proper usable CB setup**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-hp62ac-cb-radio-hand-held-magnetic-cb-aerial-base-cb-kit/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-hp62ac-cb-radio-hand-held-magnetic-cb-aerial-base-cb-kit/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-hp62ac-cb-radio-hand-held-magnetic-cb-aerial-base-cb-kit/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-hp62ac-cb-radio-hand-held-magnetic-cb-aerial-base-cb-kit/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20radio%20handheld%20kit%20Mag%20mount%20CB%20Aerial&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-hp62ac-cb-radio-hand-held-magnetic-cb-aerial-base-cb-kit%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-hp62ac-cb-radio-hand-held-magnetic-cb-aerial-base-cb-kit/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-hp62ac-cb-radio-hand-held-magnetic-cb-aerial-base-cb-kit/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-hp62ac-cb-radio-hand-held-magnetic-cb-aerial-base-cb-kit/?share=telegram) - **Product categories:** CB radio Hand Helds --- ### [PNI Escort HP 62 40 UK 40 EU Handheld CB Radio](https://cbradio.co.uk/product/handheld-cb-radio-pni-escort-hp-62-multi-standard-fm-40-uk-40-eu/) **Published:** February 22, 2023 **Author:** Jan **Content:** The **PNI Escort HP 62 CB Radio** is a compact, portable CB transceiver designed for **on-the-go communication and flexible use**. Small, lightweight and easy to carry, it’s ideal for **occasional use, backup communication or portable setups**. --- ## ⚠️ Important (Please Read) - **Must be set to UK band before first use** - Performance with the **small antenna is limited compared to a full CB setup** - Runs on **AA batteries only** - ❌ **No charger or car adapter included** ✔ Optional accessories are available to upgrade performance --- ## 📡 Portable CB Communication ✔ Compact handheld design ✔ Multi-standard European operation ✔ Up to **4W output power (legal CB limit)** ✔ Ideal for portable and backup use --- ## 🌍 Multi-Standard Operation - Covers multiple European CB bands - Factory set to **CEPT 40CH FM (4W)** - Easy band selection Perfect for travel across Europe. --- ## 🔋 Battery Powered - Operates on **AA batteries** - Built-in **battery saving circuit** - Lightweight and fully portable --- ## 🎛 Practical Features - PLL synthesizer for stable frequency control - Illuminated display for night use - External microphone connection - Simple, easy-to-use controls --- ## Key Features - Handheld CB radio - 4W output (AM/FM) - Multi-standard bands - Compact and lightweight - Battery-saving function - External mic socket --- ## Technical Specifications - **Frequency Range:** 25.615 – 30.105 MHz - **Channels:** 40 / 80 (band dependent) - **Modes:** AM / FM - **Power Output:** 4W - **Impedance:** 50 Ohms - **Dimensions:** 30 x 70 x 140 mm - **Weight:** 220 g (without batteries) --- ## Why Choose the HP62? ✔ Portable and easy to carry ✔ Simple CB communication anywhere ✔ Multi-standard flexibility ✔ Great as a backup or occasional-use radio --- ## Ideal For - Portable CB use - Events and outdoor activities - Backup communication - Beginners --- ## Straight Talking This is about **portability, not performance**. If you want range, go mobile or base — if you want **something you can carry anywhere**, this does the job. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/handheld-cb-radio-pni-escort-hp-62-multi-standard-fm-40-uk-40-eu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/handheld-cb-radio-pni-escort-hp-62-multi-standard-fm-40-uk-40-eu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/handheld-cb-radio-pni-escort-hp-62-multi-standard-fm-40-uk-40-eu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/handheld-cb-radio-pni-escort-hp-62-multi-standard-fm-40-uk-40-eu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%2062%2040%20UK%2040%20EU%20Handheld%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fhandheld-cb-radio-pni-escort-hp-62-multi-standard-fm-40-uk-40-eu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/handheld-cb-radio-pni-escort-hp-62-multi-standard-fm-40-uk-40-eu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/handheld-cb-radio-pni-escort-hp-62-multi-standard-fm-40-uk-40-eu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/handheld-cb-radio-pni-escort-hp-62-multi-standard-fm-40-uk-40-eu/?share=telegram) - **Product categories:** CB radio Hand Helds --- ### [Duplex CB / FM Aerial 26-28MHz, 87-108MHz](https://cbradio.co.uk/product/duplex-cb-fm-aerial-26-28mhz-cb-87-108mhz-fm-5-m-cb-and-fm-cable/) **Published:** February 23, 2023 **Author:** Jan **Content:** The **PNI Duplex 2000 CB/FM Antenna** is a clever **dual-purpose antenna** that allows you to use **CB radio and standard car FM radio from a single antenna**. Designed to replace your original vehicle aerial, it’s the perfect solution when you want **CB functionality without adding extra antennas**. --- ## 🔄 2-in-1 Antenna Solution ✔ Works on **CB band (27 MHz)** ✔ Works on **FM radio (88–108 MHz)** ✔ Replaces your standard car aerial ✔ Keeps your vehicle looking clean and uncluttered One antenna — two functions. --- ## 🚗 Clean Installation - Designed to **replace OEM car antenna** - Includes **2 separate cables**: - 1 × CB radio connection - 1 × FM radio connection - No need for multiple aerials on your vehicle Ideal for discreet installations. --- ## 📡 Performance Overview - **SWR < 1.2** (well-tuned performance) - CB Power handling: **up to 50W** - Impedance: - CB: 50 Ohms - FM: 150 Ohms --- ## ⚙️ Adjustable & Tunable - Adjustable tip for **SWR calibration** - Optimise performance for your setup - Recommended to tune using proper SWR equipment --- ## 🛠 Durable Construction - Built from quality materials - Designed for long-term outdoor use - Reliable in everyday driving conditions --- ## Key Features - Dual CB + FM antenna - Replaces standard car aerial - Separate cables for CB and FM - Adjustable for tuning - Compact and discreet design --- ## Why Choose the Duplex 2000? ✔ No need for two antennas ✔ Clean, factory-style installation ✔ Ideal for discreet CB setups ✔ Simple and practical solution --- ## Ideal For - Cars where appearance matters - Users wanting a hidden CB setup - Everyday drivers - Light CB use --- ## ⚠️ Straight Talking This is about **convenience and clean install**, not maximum range. If you want **top performance**, go for a dedicated CB antenna. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/duplex-cb-fm-aerial-26-28mhz-cb-87-108mhz-fm-5-m-cb-and-fm-cable/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/duplex-cb-fm-aerial-26-28mhz-cb-87-108mhz-fm-5-m-cb-and-fm-cable/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/duplex-cb-fm-aerial-26-28mhz-cb-87-108mhz-fm-5-m-cb-and-fm-cable/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/duplex-cb-fm-aerial-26-28mhz-cb-87-108mhz-fm-5-m-cb-and-fm-cable/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Duplex%20CB%20%2F%20FM%20Aerial%2026-28MHz%2C%2087-108MHz&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fduplex-cb-fm-aerial-26-28mhz-cb-87-108mhz-fm-5-m-cb-and-fm-cable%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/duplex-cb-fm-aerial-26-28mhz-cb-87-108mhz-fm-5-m-cb-and-fm-cable/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/duplex-cb-fm-aerial-26-28mhz-cb-87-108mhz-fm-5-m-cb-and-fm-cable/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/duplex-cb-fm-aerial-26-28mhz-cb-87-108mhz-fm-5-m-cb-and-fm-cable/?share=telegram) - **Product categories:** PNI CB Antennas --- ### [PNI ML100 CB Antenna 26-30Mhz 250W](https://cbradio.co.uk/product/pni-ml100-cb-antenna-26-30mhz-250w/) **Published:** February 23, 2023 **Author:** Jan **Content:** The **PNI ML100 CB Antenna Kit** is a reliable, mid-sized antenna designed for drivers who want **good performance without going too large**. With a **1.1 metre total height**, strong magnetic base and complete installation kit, it offers a great balance between **range, practicality and value**. --- ## 📡 Strong Everyday Performance ✔ Covers **26 – 28 MHz CB band** ✔ Up to **~12 km communication range** (ideal conditions) ✔ Low SWR: **≈ 1.0 at centre band** ✔ Handles up to **250W continuous power** Ideal for everyday CB communication. --- ## 🚗 Complete Ready-to-Install Kit Everything included: - ML100 antenna - **125mm magnetic base** - **4m RG58 coax cable** - **PL259 connector fitted** ✔ Quick install — no drilling required --- ## 🧲 Stable Magnetic Mount - **125mm base** for strong grip - Holds securely at speed - Easy to fit and remove - Ideal for cars, vans and trucks --- ## 📏 Balanced Size & Range - **Approx. 1 metre whip (1.1m total height)** - Better performance than short antennas - Easier to manage than longer 1.5m+ models --- ## Key Features - Mid-size CB antenna (1.1m total height) - Magnetic mount included - 4m RG58 cable - PL259 connector - Stainless steel construction - Easy installation --- ## Technical Specifications - **Frequency Range:** 26 – 28 MHz - **Length:** 100 cm (110 cm including base) - **Impedance:** 50 Ohms - **Maximum Power:** 250W - **SWR:** approx. 1.0 (centre band) - **Gain:** approx. 4 dBi - **Cable Length:** 4 metres - **Magnetic Base:** 125 mm - **Material:** Stainless steel - **Weight:** 1.2 kg --- ## What’s in the Box? - PNI ML100 antenna - Magnetic base (125mm) - 4m RG58 cable - PL259 plug (fitted) --- ## Why Choose the ML100? ✔ Great balance of **size vs performance** ✔ Easy installation with mag mount ✔ Reliable everyday use ✔ Good upgrade from smaller antennas --- ## Ideal For - Cars, vans and light trucks - Everyday CB users - Drivers wanting better range without a long whip - Urban and mixed driving conditions --- ## Straight Talking If you want **better performance than small antennas but don’t want a big 1.5m whip**, this sits right in the sweet spot. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-ml100-cb-antenna-26-30mhz-250w/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-ml100-cb-antenna-26-30mhz-250w/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-ml100-cb-antenna-26-30mhz-250w/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-ml100-cb-antenna-26-30mhz-250w/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20ML100%20CB%20Antenna%2026-30Mhz%20250W&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-ml100-cb-antenna-26-30mhz-250w%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-ml100-cb-antenna-26-30mhz-250w/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-ml100-cb-antenna-26-30mhz-250w/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-ml100-cb-antenna-26-30mhz-250w/?share=telegram) - **Product categories:** PNI CB Antennas --- ### [Jopix Doris Din mount CB Radio 12/24v colour screen front speaker](https://cbradio.co.uk/product/jopix-doris-din-mount-cb-radio-12-24v-colour-screen-front-speaker/) **Published:** May 25, 2023 **Author:** Jan **Content:** The **Jopix Doris CB Radio** is a modern, versatile CB transceiver designed for **maximum flexibility and ease of installation**. Whether mounted on the dashboard, windscreen or fitted into a DIN slot, the Doris offers **multi-standard operation, a large colour display and advanced features** — all in one compact unit. --- ## 🚗 Flexible Installation Options ✔ Mount on **windscreen or dashboard** ✔ Fits **DIN compartments** ✔ Supplied with mounting accessories ✔ Compact, adaptable design Perfect for modern vehicles and custom installs. --- ## 🌍 Multi-Standard European Operation - Covers **26.565 – 27.99125 MHz** - AM / FM operation - Works across European CB bands Ideal for both UK and international use. --- ## 🎨 Large TFT Colour Display - Bright, easy-to-read **TFT screen** - Clear channel and function display - Designed for visibility in all lighting conditions A big step up from basic displays. --- ## 🎛 Advanced Features - **Dual Watch** – monitor two channels - **VOX hands-free operation** - **CTCSS / DCS** for selective calling - **Roger Beep** - **Scan function with adjustable range** - **Noise reduction function** - **Time Out Timer (TOT)** - **5K frequency step setting** --- ## 🔊 Reliable Communication - 4W output (AM/FM) - Strong receive sensitivity - Built-in noise reduction - Clear, consistent audio --- ## Key Features - 12V / 24V operation - Multi-standard CB radio - Large TFT colour display - AM / FM modes - VOX hands-free - Dual Watch - Scan function - PA (Public Address) capability --- ## Technical Specifications **General** - **Frequency Range:** 26.565 – 27.99125 MHz - **Power Supply:** 12V / 24V - **Frequency Control:** PLL Synthesizer - **Operating Temp:** -20°C to +55°C **Transmitter** - **Output Power:** 4W - **Output Impedance:** 50 Ohms - **Distortion:** < 5% **Receiver** - **Sensitivity:** < 1µV - **Image Rejection:** 70 dB - **Adjacent Channel Rejection:** 60 dB - **Audio Output:** 1W --- ## Why Choose the Jopix Doris? ✔ Flexible mounting options ✔ Modern colour display ✔ Advanced features in a compact unit ✔ Ideal for both casual and regular users --- ## Ideal For - Cars, vans and trucks - Modern vehicle installations - Drivers wanting a clean setup - European travel --- ## Straight Talking If you want a **modern CB radio with flexible mounting and a proper display**, the Doris is a smart all-rounder. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/jopix-doris-din-mount-cb-radio-12-24v-colour-screen-front-speaker/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/jopix-doris-din-mount-cb-radio-12-24v-colour-screen-front-speaker/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/jopix-doris-din-mount-cb-radio-12-24v-colour-screen-front-speaker/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/jopix-doris-din-mount-cb-radio-12-24v-colour-screen-front-speaker/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Jopix%20Doris%20Din%20mount%20CB%20Radio%2012%2F24v%20colour%20screen%20front%20speaker&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fjopix-doris-din-mount-cb-radio-12-24v-colour-screen-front-speaker%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/jopix-doris-din-mount-cb-radio-12-24v-colour-screen-front-speaker/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/jopix-doris-din-mount-cb-radio-12-24v-colour-screen-front-speaker/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/jopix-doris-din-mount-cb-radio-12-24v-colour-screen-front-speaker/?share=telegram) - **Product categories:** Jopix --- ### [PNI Escort HP 82 CB radio Hand held](https://cbradio.co.uk/product/portable-cb-radio-pni-hp-82-multi-standard-4w-12v-am-fm-nrc-roger-beep/) **Published:** October 3, 2023 **Author:** Jan **Content:** The **PNI Escort HP 82 CB Radio** is a versatile **multi-standard handheld CB radio** that can be used both **on the move or in your vehicle**. Packed with advanced features like **NRC noise reduction, Dual Watch and adjustable power**, the HP82 delivers performance far beyond a typical handheld CB. --- ## 📡 Portable & Mobile in One ✔ Use as a **handheld CB radio** with battery and BNC antenna ✔ Convert to **mobile use** with car adapter and external antenna ✔ Compact, lightweight and easy to carry One radio — two ways to use it. --- ## 🔊 Advanced Noise Reduction (NRC) - Built-in **NRC (Noise Reduction Circuit)** - Improves receive clarity instantly - Works alongside: - **ASQ (5 levels)** - **Manual Squelch (25 levels)** ✔ One of the first handheld CB radios with this feature --- ## 🌍 Multi-Standard European Operation - Supports multiple country norms: **EU / CE / PL / I2 / DE / IN** - Defaults to **EU 4W AM/FM** - Ideal for travel across Europe --- ## 🎛 Smart Features & Control - **Dual Watch** – monitor two channels - **Roger Beep** (customisable) - **VOX function** (hands-free) - **TOT (Time Out Timer)** – prevents over-transmission - **LCR (Last Channel Recall)** - **Monitor function** - **Key lock** --- ## ⚡ Adjustable Power - Select between: - **Low power: 1.5W** - **High power: 4W** Optimise battery life or transmission strength as needed. --- ## 🔧 Expandable Options - Compatible with optional **echo & Roger Beep module (PNI ECH01)** - Programmable via software (with optional cable **PNI-PSR2030**) --- ## Key Features - Multi-standard handheld CB radio - AM / FM operation - NRC noise reduction - Dual Watch - VOX hands-free - Adjustable power output - Portable & mobile use capability - Compact and lightweight design --- ## Important Usage Note ⚠️ **Do NOT use the DC car adapter together with the BNC antenna** --- ## Why Choose the HP 82? ✔ True dual-use radio (handheld + mobile) ✔ Advanced noise reduction for clearer audio ✔ Flexible power and configuration ✔ Ideal for both casual and serious users --- ## Ideal For - Portable CB use - Outdoor and event communication - Backup communication systems - Drivers wanting flexibility - European travel --- ## Straight Talking If you want a **handheld CB that actually performs like a proper radio**, this is one of the most capable options available. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/portable-cb-radio-pni-hp-82-multi-standard-4w-12v-am-fm-nrc-roger-beep/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/portable-cb-radio-pni-hp-82-multi-standard-4w-12v-am-fm-nrc-roger-beep/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/portable-cb-radio-pni-hp-82-multi-standard-4w-12v-am-fm-nrc-roger-beep/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/portable-cb-radio-pni-hp-82-multi-standard-4w-12v-am-fm-nrc-roger-beep/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%2082%20CB%20radio%20Hand%20held&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fportable-cb-radio-pni-hp-82-multi-standard-4w-12v-am-fm-nrc-roger-beep%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/portable-cb-radio-pni-hp-82-multi-standard-4w-12v-am-fm-nrc-roger-beep/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/portable-cb-radio-pni-hp-82-multi-standard-4w-12v-am-fm-nrc-roger-beep/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/portable-cb-radio-pni-hp-82-multi-standard-4w-12v-am-fm-nrc-roger-beep/?share=telegram) - **Product categories:** CB radio Hand Helds, PNI --- ### [Jopix GS-30 CB Radio AM/FM 12/24 UK40 EU40](https://cbradio.co.uk/product/jopix-gs-30-mobile-cb-radio-xenon-am-fm-12-24-80-channels-uk40-eu40/) **Published:** October 3, 2023 **Author:** Jan **Content:** J The **Jopix GS-30 CB Radio** (also known as the CRT Xenon) is a modern compact CB radio designed for **drivers who want flexibility, clean installs and useful upgrades** in a small unit. With a **detachable microphone, quick disconnect power lead and multi-colour display**, the GS-30 stands out from other compact radios while still keeping things simple and practical. --- ## 🚗 Compact & Smart Design ✔ Compact size: **124 x 101 x 36 mm** ✔ Ideal for tight dashboards and modern vehicles ✔ Lightweight and easy to install ✔ Clean, uncluttered setup Perfect where space is limited. --- ## 🔌 Quick Disconnect Setup - **Detachable microphone** for convenience - **Quick disconnect power lead** - Easier installation and removal A great feature for mobile users and shared vehicles. --- ## 🌍 Multi-Standard European Use - **40 UK + 40 EU channels (80 total)** - Full multi-norm compatibility across Europe - AM / FM operation Ready for use at home or abroad. --- ## 🎨 Multi-Colour Display - Large LCD display - **7 selectable colours** - Clear, easy-to-read layout Designed for visibility in all lighting conditions. --- ## 🔊 Clear Audio & Control - Manual and **Automatic Squelch (ASQ)** - RF Gain adjustment - Mic Gain control - Scan function - Emergency channels **9 / 19** Everything you need for clear, controlled communication. --- ## Key Features - 4W output power (AM/FM) - Multi-standard CB radio - Detachable microphone - Quick disconnect power lead - Multi-colour LCD display - ASQ + manual squelch - RF Gain & Mic Gain - Channel scan - Roger Beep --- ## Technical Specifications - **Channels:** 80 (40 UK / 40 EU) - **Modes:** AM / FM - **Output Power:** 4W - **Dimensions:** 124 x 101 x 36 mm - **Weight:** 428 g --- ## Why Choose the GS-30? This radio is ideal if you want: ✔ Compact size with extra convenience features ✔ Easy install and removal ✔ Modern display and controls ✔ Reliable everyday performance --- ## Ideal For - Cars and vans with limited space - Drivers wanting quick install/removal - Everyday CB users - European travel --- ## Straight Talking If you want a **compact CB radio with a few smart upgrades over basic models**, the GS-30 is a great step up. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/jopix-gs-30-mobile-cb-radio-xenon-am-fm-12-24-80-channels-uk40-eu40/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/jopix-gs-30-mobile-cb-radio-xenon-am-fm-12-24-80-channels-uk40-eu40/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/jopix-gs-30-mobile-cb-radio-xenon-am-fm-12-24-80-channels-uk40-eu40/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/jopix-gs-30-mobile-cb-radio-xenon-am-fm-12-24-80-channels-uk40-eu40/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Jopix%20GS-30%20CB%20Radio%20AM%2FFM%2012%2F24%20UK40%20EU40&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fjopix-gs-30-mobile-cb-radio-xenon-am-fm-12-24-80-channels-uk40-eu40%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/jopix-gs-30-mobile-cb-radio-xenon-am-fm-12-24-80-channels-uk40-eu40/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/jopix-gs-30-mobile-cb-radio-xenon-am-fm-12-24-80-channels-uk40-eu40/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/jopix-gs-30-mobile-cb-radio-xenon-am-fm-12-24-80-channels-uk40-eu40/?share=telegram) - **Product categories:** Jopix --- ### [Anytone Mini Multistandard 27MHz AM FM UK EU](https://cbradio.co.uk/product/anytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu/) **Published:** October 3, 2023 **Author:** Jan **Content:** The **Anytone Mini (CRT One) CB Radio** is a compact, no-nonsense CB radio designed for **simple, reliable communication**. Small, easy to use and backed by a trusted brand, it’s an excellent choice for **beginners or anyone wanting a straightforward CB setup**. --- ## 🚗 Ultra Compact & Easy to Install ✔ Extremely small size – approx. **100 x 100 x 23mm** ✔ Fits easily into tight dashboards ✔ Front microphone socket for convenience ✔ Supplied with mounting bracket and power lead Perfect for modern vehicles with limited space. --- ## 🌍 Multi-Standard European Use - **40 UK + 40 EU channels (80 total)** - Covers both CEPT and UK bands - Ready for use across Europe Ideal for travel and everyday driving. --- ## 🔊 Simple, Reliable Operation - AM / FM modes - Auto squelch for reduced background noise - Clear internal speaker - External speaker socket for louder audio No complicated menus — just straightforward communication. --- ## Key Features - 80 channels (UK + EU) - AM / FM operation - 4W output power (legal standard) - Auto squelch - Front microphone socket - UP/DOWN channel controls - Orange channel display - Compact, lightweight design --- ## Technical Specifications - **Frequency Range:** - 26.965 – 27.405 MHz (CEPT) - 27.60125 – 27.99125 MHz (UK) - **Output Power:** 4W - **Modes:** AM / FM - **Dimensions:** approx. 100 x 100 x 23 mm - **Speaker:** Internal + external speaker socket --- ## What’s in the Box? - CB Radio - Microphone - Mounting bracket - Power lead --- ## Why Choose the Anytone Mini / CRT One? ✔ Compact and easy to fit ✔ Simple controls – ideal for beginners ✔ Trusted brand with UK support ✔ Reliable everyday performance --- ## Ideal For - First-time CB users - Cars and vans with limited space - Basic communication setups - Drivers wanting a simple, affordable radio --- ## Straight Talking If you want a **small, simple CB radio that just works without fuss**, this is one of the best entry-level choices available. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/anytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/anytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/anytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/anytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Anytone%20Mini%20Multistandard%2027MHz%20AM%20FM%20UK%20EU&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fanytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/anytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/anytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/anytone-mini-multistandard-80-channel-lcd-27mhz-am-fm-uk-eu/?share=telegram) - **Product categories:** Anytone --- ### [President Lincoln II Plus V3 10/12M CB Radio](https://cbradio.co.uk/product/president-lincoln-ii-plus-v3-10-12m-mobile-cb-transceiver/) **Published:** October 22, 2023 **Author:** Jan **Content:** The **President Lincoln II+ Radio** is a powerful, feature-packed mobile transceiver designed for users who demand **serious performance, stability and flexibility**. Smaller in size but loaded with advanced features, the Lincoln II+ delivers **excellent SSB performance straight out of the box**, making it ideal for catching band openings and long-distance contacts. --- ## ⚠️ Important This is an **amateur (HAM) radio transceiver** and **requires the appropriate licence to operate** on certain frequencies. --- ## 🔥 High Power Multi-Mode Performance ✔ AM / FM / SSB operation ✔ Up to **50W PEP output** ✔ Exceptional SSB stability and clarity ✔ Expanded frequency coverage including **12 metre band** Built for serious operators who want more than standard CB. --- ## 🚀 Updated Lincoln II+ Features - **Improved Echo** (fully adjustable delay) - **Enhanced power output** - **6-pin wireless microphone compatibility** - Expanded frequency range (now includes 12m band) A modern upgrade to a legendary platform. --- ## 🎛 Advanced Control & Audio - Automatic Squelch Control (ASC) - Manual squelch override - RF and microphone control - Clear, stable transmission - Strong receive sensitivity Designed for precise tuning and high-quality communication. --- ## 🎨 Customisable Display - Multi-colour display (amber, blue, green) - Clear, easy-to-read layout - Designed for both mobile and base use --- ## Key Features - AM / FM / SSB (USB/LSB) modes - Up to 50W PEP output - Expanded frequency coverage (including 12m band) - ASC + Manual Squelch - Adjustable echo - Wireless mic compatibility (6-pin) - Compact, modern design --- ## Technical Specifications - **Power Supply:** 14V DC - **Output Power:** - AM Carrier: 2–12W - AM Modulation: up to 50W PEP - SSB: approx. 42W - **Impedance:** 50 Ohms - **SWR:** ~1.2 (with dummy load) - **Current Draw:** Up to 10A - **Dimensions:** 170 x 250 x 52 mm --- ## ⚠️ Power & Fuse Note - Radio can draw **over 5A when modulating** - Use **10–15A fuse (as supplied)** - Ignore incorrect lower fuse rating in manual --- ## Why Choose the Lincoln II+? ✔ Excellent SSB performance ✔ Higher output than standard CB radios ✔ Stable and reliable platform ✔ Compact yet powerful design ✔ Ideal for serious radio users --- ## Ideal For - Amateur radio operators - Long-distance (DX) communication - Advanced CB users stepping up - Mobile HF/10m setups ## Straight Talking If you want **real power, proper SSB performance and flexibility beyond CB**, this is where things step up. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-lincoln-ii-plus-v3-10-12m-mobile-cb-transceiver/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-lincoln-ii-plus-v3-10-12m-mobile-cb-transceiver/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-lincoln-ii-plus-v3-10-12m-mobile-cb-transceiver/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-lincoln-ii-plus-v3-10-12m-mobile-cb-transceiver/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20President%20Lincoln%20II%20Plus%20V3%2010%2F12M%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-lincoln-ii-plus-v3-10-12m-mobile-cb-transceiver%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-lincoln-ii-plus-v3-10-12m-mobile-cb-transceiver/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-lincoln-ii-plus-v3-10-12m-mobile-cb-transceiver/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-lincoln-ii-plus-v3-10-12m-mobile-cb-transceiver/?share=telegram) - **Product categories:** President --- ### [Antron 99 fiberglass Homebase Antenna](https://cbradio.co.uk/product/solarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna/) **Published:** February 12, 2024 **Author:** Jan **Content:** The **Solarcon A-99 (Antron-99) Base Antenna** is one of the most popular and proven base antennas ever made — known for **excellent performance, simple setup and wide frequency coverage**. Built from durable fibreglass and featuring the unique **Twin Ring Adjust-A-Match system**, the A-99 allows precise tuning for optimum SWR across a wide range of frequencies. --- ## 📡 Proven Performance ✔ Half-wave over quarter-wave design ✔ **Omnidirectional (360° coverage)** ✔ Covers CB, export and **10 metre amateur band** ✔ High power handling up to **2000W PEP** A reliable performer for both local and long-distance communication. --- ## ⚙️ Adjustable for Perfect SWR The A-99 features **Solarcon’s Twin Ring tuning system**: - Raise rings → increases frequency - Lower rings → decreases frequency - Fine-tune for best SWR across your band Simple, effective tuning without cutting the antenna. --- ## 🛠 Strong & Lightweight Construction - Durable **fibreglass construction** - Weather-resistant design - Supplied in **3 sections for easy assembly** - Entire antenna radiates for improved efficiency Built to last and easy to install. --- ## Key Features - Fibreglass base station antenna - Wide frequency coverage (CB & 10m) - Adjustable SWR tuning system - High power handling (2000W PEP) - 360° omnidirectional radiation - Lightweight and durable --- ## Technical Specifications - **Type:** Half-wave over quarter-wave - **Length:** 18 ft (approx. 5.5 metres) - **Gain:** Up to 9.9 dBi - **Power Handling:** 2000W PEP - **Radiation Pattern:** Omnidirectional - **Construction:** Fibreglass - **Sections:** 3 (easy assembly) - **Lightning Protection:** Up to 14,500 volts --- ## Why Choose the A-99? ✔ Easy to install and tune ✔ Wide frequency coverage ✔ Lightweight yet durable ✔ Proven long-term reliability ✔ Popular worldwide for a reason --- ## Ideal For - CB base stations - 10 metre amateur radio - Users wanting simple setup with good performance - Beginners and experienced operators alike ## Straight Talking If you want a **reliable, easy-to-tune base antenna that just works**, the A-99 has been a go-to choice for decades. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/solarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/solarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/solarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/solarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Antron%2099%20fiberglass%20Homebase%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsolarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/solarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/solarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/solarcon-antron-99-a99-26-28-mhz-fiberglass-homebase-antenna/?share=telegram) - **Product categories:** Homebase Aerials --- ### [Heavy Duty Beehive Mount SO239 to 3/8 Fitting](https://cbradio.co.uk/product/heavy-duty-beehive-mount-so239-to-3-8th-fitting-for-large-whip-antennas/) **Published:** February 26, 2024 **Author:** Jan **Content:** The **Heavy Duty Beehive Mount SO239 to 3/8** is a robust mounting solution designed for **large mobile antennas and heavy-duty HF whips**. Built to handle demanding setups, this mount provides a **secure and reliable connection** between your antenna and coax system. --- ## 🛠 Built for Strength ✔ Heavy-duty construction for larger antennas ✔ Designed for **high-stress mobile setups** ✔ Ideal for long or heavy HF/CB whips ✔ Durable and reliable in all conditions Perfect for serious installations where standard mounts aren’t enough. --- ## 🔧 Universal Compatibility - **SO239 (UHF Female)** base connection - **3/8″ thread** for antenna fitting - Works with a wide range of CB and HF antennas - Ideal for use with larger performance whips --- ## Key Features - Heavy duty beehive-style mount - SO239 socket connection - 3/8″ antenna fitting - Strong, stable design - Suitable for mobile installations --- ## Ideal For - Large CB antennas - HF mobile whips - High-performance setups - Off-road and truck installations --- ## Why Choose This Mount? ✔ Stronger than standard mounts ✔ Reliable connection for heavy antennas ✔ Designed for demanding use ✔ Simple and effective solution --- ## Straight Talking If you’re running a **large or heavy antenna**, don’t risk a weak mount — this is built to handle it properly. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/heavy-duty-beehive-mount-so239-to-3-8th-fitting-for-large-whip-antennas/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/heavy-duty-beehive-mount-so239-to-3-8th-fitting-for-large-whip-antennas/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/heavy-duty-beehive-mount-so239-to-3-8th-fitting-for-large-whip-antennas/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/heavy-duty-beehive-mount-so239-to-3-8th-fitting-for-large-whip-antennas/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Heavy%20Duty%20Beehive%20Mount%20SO239%20to%203%2F8%20Fitting&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fheavy-duty-beehive-mount-so239-to-3-8th-fitting-for-large-whip-antennas%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/heavy-duty-beehive-mount-so239-to-3-8th-fitting-for-large-whip-antennas/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/heavy-duty-beehive-mount-so239-to-3-8th-fitting-for-large-whip-antennas/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/heavy-duty-beehive-mount-so239-to-3-8th-fitting-for-large-whip-antennas/?share=telegram) - **Product categories:** CB Aerial Mounts and Brackets --- ### [Sirio 827 Base Station Antenna CB & 10M](https://cbradio.co.uk/product/sirio-827-5-8-wave-base-station-antenna-cb-10m-amateur-bands/) **Published:** April 7, 2024 **Author:** Jan **Content:** ⚠️ **PLEASE CONTACT US BEFORE ORDERING TO CONFIRM STOCK AVAILABILITY** --- The **Sirio 827 Base Antenna** is one of the most respected and proven antennas in the CB world — known for **excellent performance, durability and long-distance capability**. Designed as a **5/8 wave ground plane antenna**, the Sirio 827 delivers strong, consistent signal performance across the CB band and is also ideal for **10 metre amateur use (28 MHz)**. --- ## 📡 Outstanding Performance ✔ 5/8 wave design for improved ground-wave propagation ✔ Excellent transmit and receive performance ✔ **360° omnidirectional coverage** ✔ Ideal for both local and long-distance communication A serious upgrade over standard base antennas. --- ## 🛠 Built to Last - High-quality construction using **aluminium, steel, copper and nylon** - Engineered for long-term outdoor use - Strong radial system for stability and performance - Designed to withstand harsh weather conditions Built for years of reliable service. --- ## ⚙️ Tuned for Efficiency - Low SWR: **≤ 1.1:1 at resonance** - Wide bandwidth: **2000 kHz (SWR ≤ 2:1)** - Transformer DC-ground feed system - Optimised for consistent, efficient operation --- ## Key Features - 5/8 wave ground plane antenna - Suitable for CB & 10 metre band - Omnidirectional radiation pattern - High power handling - SO-239 (UHF female) connector - Vertical polarisation --- ## Technical Specifications - **Frequency Range:** 26 – 28 MHz - **Length:** Approx. 6.7 metres - **Gain:** 1.5 dBd / 3.65 dBi - **Impedance:** 50 Ohm (unbalanced) - **SWR:** ≤ 1.1:1 at resonance - **Bandwidth (SWR ≤ 2:1):** 2000 kHz - **Max Power:** 1000W continuous (CW) - **Feed System:** Transformer DC-ground (base) - **Connector:** UHF Female (SO-239) --- ## Build & Installation - **Radial Length:** Approx. 1.4 metres - **Mast Size:** 35 – 39 mm - **Wind Load:** 264 N @ 150 km/h - **Wind Surface:** 0.23 m² - **Weight:** Approx. 6 kg --- ## Why Choose the Sirio 827? This antenna is ideal if you want: ✔ Proven, trusted performance ✔ Strong and stable signal ✔ Excellent build quality ✔ Long service life A favourite among experienced CB and 10m users for good reason. --- ## Ideal For - Base station CB setups - 10 metre amateur radio - Long-distance communication - Users upgrading from entry-level antennas ## Straight Talking If you want a **reliable, high-performance base antenna that consistently delivers**, the Sirio 827 is one of the safest bets you can make. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-827-5-8-wave-base-station-antenna-cb-10m-amateur-bands/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-827-5-8-wave-base-station-antenna-cb-10m-amateur-bands/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-827-5-8-wave-base-station-antenna-cb-10m-amateur-bands/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-827-5-8-wave-base-station-antenna-cb-10m-amateur-bands/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20827%20Base%20Station%20Antenna%20CB%20%26%2010M&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-827-5-8-wave-base-station-antenna-cb-10m-amateur-bands%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-827-5-8-wave-base-station-antenna-cb-10m-amateur-bands/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-827-5-8-wave-base-station-antenna-cb-10m-amateur-bands/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-827-5-8-wave-base-station-antenna-cb-10m-amateur-bands/?share=telegram) - **Product categories:** Homebase Aerials --- ### [Sirio Vector 4000 CB radio home base Antenna](https://cbradio.co.uk/product/sirio-vector-4000-cb-home-base-antenna/) **Published:** April 7, 2024 **Author:** Jan **Content:** ⚠️ **PLEASE CONTACT US BEFORE PURCHASING TO CONFIRM STOCK AVAILABILITY** --- The **Vector 4000 Base Antenna** is a legendary high-performance antenna, now upgraded for even better reliability and long-distance communication. Designed for serious CB and 10m users, this **3/4 wave base station antenna** delivers **excellent range, strong signal performance and consistent results** — making it a top choice for base setups. --- ## 📡 Built for Long-Distance Performance ✔ 3/4 wave design for improved radiation characteristics ✔ Strong performance on **27 MHz CB and 10 metre band** ✔ **Omnidirectional (360° coverage)** ✔ Excellent for local and DX communication If you’re chasing distance, this antenna delivers. --- ## 🛠 Strong & Durable Construction - Made from **high-grade aluminium alloy (6063 T-832)** - Telescopic sections for easy assembly - Designed to withstand outdoor conditions - Robust long whip for optimal performance Built to last in real-world installations. --- ## ⚙️ Tunable for Optimal Performance - Factory tuned to mid-band - Adjustable via whip length - Fine-tune SWR for your setup - Gamma match feed system for efficient operation --- ## Key Features - 3/4 wave coaxial J-pole design - Suitable for CB & 10 metre amateur band - Omnidirectional coverage - High power handling capability - SO-239 connection - Vertical polarisation --- ## Technical Specifications - **Frequency Range:** 27 – 28.5 MHz - **Length:** Approx. 8.5 metres - **Gain:** 2 dBd / 4.15 dBi - **Impedance:** 50 Ohm (unbalanced) - **SWR:** ≤ 1.2:1 at resonance - **Bandwidth (SWR ≤ 2:1):** 1350 kHz - **Max Power:** - 1000W continuous (CW) - 3000W short duration - **Radiation Pattern:** 360° omnidirectional - **Feed System:** Gamma match (base) - **Connector:** SO-239 --- ## Package Information - **Weight:** Approx. 6.1 kg - **Box Size:** 144 x 18 x 13 cm --- ## Why Choose the Vector 4000? This antenna is ideal if you want: ✔ Proven long-range performance ✔ Strong, reliable construction ✔ High power handling capability ✔ A serious upgrade over entry-level base antennas --- ## Ideal For - Base station CB setups - 10 metre amateur radio use - Long-distance (DX) communication - Enthusiasts wanting maximum performance ## Straight Talking If you want **range, reliability and real performance**, the Vector 4000 is a proven choice that delivers. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/sirio-vector-4000-cb-home-base-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/sirio-vector-4000-cb-home-base-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/sirio-vector-4000-cb-home-base-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/sirio-vector-4000-cb-home-base-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Sirio%20Vector%204000%20CB%20radio%20home%20base%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsirio-vector-4000-cb-home-base-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/sirio-vector-4000-cb-home-base-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/sirio-vector-4000-cb-home-base-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/sirio-vector-4000-cb-home-base-antenna/?share=telegram) - **Product categories:** Homebase Aerials --- ### [Antenna Aerial Rotator Light Duty AR-600XL](https://cbradio.co.uk/product/light-duty-antenna-aerial-rotator-ar-600xl-vhf-uhf-beam-director/) **Published:** July 11, 2024 **Author:** Jan **Content:** ⚠️ **Please contact us before purchasing to confirm stock availability** --- The **AR-600 Antenna Rotator** is a compact, reliable solution for rotating **VHF/UHF antennas**, designed specifically for **smaller beam antennas and TV aerials**. Supplied as a complete kit with control unit and remote, it allows precise positioning of your antenna for maximum signal performance. --- ## 📡 Designed for Smaller Antennas Ideal for: ✔ 2m (144 MHz) beam antennas ✔ 70cm (430 MHz) antennas ✔ Lightweight directional arrays ✔ TV aerials Not intended for large HF beams — perfect for light-duty applications. --- ## 🎯 Precision Control - Programmable controller with **memory for up to 12 directions** - **Digital direction display** on control unit - Full control via **infrared remote or front panel** - Accurate positioning for best signal performance --- ## 📲 Remote Operation - Supplied with **infrared remote control** - Control rotation from your shack or room - Quick access to stored antenna positions --- ## 🛠 Built to Last - Weatherproof **cast aluminium housing** - Precision **metal gears** - **Steel thrust bearings** for durability - Smooth, reliable rotation --- ## Key Features - Suitable for small VHF/UHF antennas - Programmable memory (12 positions) - Infrared remote control included - Digital direction indicator - Compact and rugged construction --- ## Technical Specifications - **Mast Size:** 28 – 44 mm (1⅛” – 1¾”) - **Rotation Time:** Approx. 74 seconds (full rotation) - **Rotation Torque:** 21.5 Nm - **Operating Voltage:** 220 – 230V AC - **Weight:** 4.2 kg --- ## What’s Included - Rotator unit - Control unit (with digital display) - Infrared remote control (3-device universal) - Mount clamps & hardware --- ## ⚠️ Important Information - Requires **3-core control cable (NOT included)** - Designed for **light-duty antennas only** - Indoor control unit use --- ## Why Choose the AR-600? ✔ Simple, reliable antenna positioning ✔ Remote-controlled convenience ✔ Strong, durable construction ✔ Excellent value for VHF/UHF setups --- ## Ideal For - Amateur radio operators (2m / 70cm) - Base station installations - Directional antenna setups - TV aerial positioning --- ## Straight Talking If you’re running a **small beam or directional antenna**, this is a straightforward and reliable way to get the most out of your setup. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/light-duty-antenna-aerial-rotator-ar-600xl-vhf-uhf-beam-director/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/light-duty-antenna-aerial-rotator-ar-600xl-vhf-uhf-beam-director/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/light-duty-antenna-aerial-rotator-ar-600xl-vhf-uhf-beam-director/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/light-duty-antenna-aerial-rotator-ar-600xl-vhf-uhf-beam-director/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Antenna%20Aerial%20Rotator%20Light%20Duty%20AR-600XL&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Flight-duty-antenna-aerial-rotator-ar-600xl-vhf-uhf-beam-director%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/light-duty-antenna-aerial-rotator-ar-600xl-vhf-uhf-beam-director/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/light-duty-antenna-aerial-rotator-ar-600xl-vhf-uhf-beam-director/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/light-duty-antenna-aerial-rotator-ar-600xl-vhf-uhf-beam-director/?share=telegram) - **Product categories:** Rotators --- ### [Midland CB Radio CB18 UK/EU AM FM](https://cbradio.co.uk/product/midland-cb-radio-cb-18-uk-eu-80-channel-am-fm-multi-standard/) **Published:** February 13, 2025 **Author:** Jan **Content:** The **Midland 18 CB Radio** is a compact, feature-packed CB designed to deliver **reliable communication with modern functionality at an affordable price**. Built for everyday use, it combines **multi-standard European operation, VOX hands-free communication and advanced noise control** in a practical, easy-to-install unit. --- ## 🚗 Compact & Easy to Install ✔ Compact size (114 x 43 x 180 mm) ✔ Lightweight design (499g) ✔ Plug-and-play with cigarette lighter connection ✔ Ideal for cars, vans and mobile setups No complicated wiring — install and go. --- ## 🌍 Multi-Standard European Operation - Covers **26.565 – 27.99125 MHz** - Works across **all major European CB bands** - Direct access to **emergency channels 9 & 19** Perfect for UK and international driving. --- ## 🎤 Smart Microphone Control The included microphone features: - **UP / DOWN channel selection** - **LOCK function** - Improved capsule for **clearer voice modulation** Quick and easy operation without distraction. --- ## 🔊 Clear Communication & Noise Control - Dual squelch system: **Manual + Digital (DS, 5 levels)** - **RF Gain (7 levels)** for cleaner reception - **VOX hands-free function (5 levels)** Designed to give clear communication even in noisy environments. --- ## 🎨 Modern Display - Multi-colour LCD display (**7 colours**) - Built-in **S-meter** - Clear and easy-to-read interface --- ## Key Features - 4W Output Power (legal CB standard) - AM / FM operation - Multi-standard bands - VOX hands-free function - Dual squelch (Manual + Digital) - RF Gain adjustment - Emergency channels 9 / 19 - External speaker socket - Microphone with UP/DOWN/LOCK controls --- ## Technical Specifications - **Frequency Range:** 26.565 – 27.99125 MHz - **Modes:** AM / FM - **Power Output:** 4W - **Power Supply:** 12V (cigarette lighter plug included) - **Dimensions:** 114 x 43 x 180 mm - **Weight:** 499 g --- ## Why Choose the Midland 18? This radio is ideal if you want: ✔ Affordable, reliable CB communication ✔ Modern features without complexity ✔ Compact design for easy installation ✔ Trusted Midland quality --- ## Ideal For - Everyday drivers - Vans and work vehicles - First-time CB users - European travel ## Straight Talking If you want a **modern, affordable CB radio that’s easy to use and install**, the Midland 18 is a great all-round choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/midland-cb-radio-cb-18-uk-eu-80-channel-am-fm-multi-standard/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/midland-cb-radio-cb-18-uk-eu-80-channel-am-fm-multi-standard/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/midland-cb-radio-cb-18-uk-eu-80-channel-am-fm-multi-standard/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/midland-cb-radio-cb-18-uk-eu-80-channel-am-fm-multi-standard/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Midland%20CB%20Radio%20CB18%20UK%2FEU%20AM%20FM&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmidland-cb-radio-cb-18-uk-eu-80-channel-am-fm-multi-standard%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/midland-cb-radio-cb-18-uk-eu-80-channel-am-fm-multi-standard/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/midland-cb-radio-cb-18-uk-eu-80-channel-am-fm-multi-standard/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/midland-cb-radio-cb-18-uk-eu-80-channel-am-fm-multi-standard/?share=telegram) - **Product categories:** Midland --- ### [CB Radio Midland CB28 UK40 EU40 AM/FM](https://cbradio.co.uk/product/midland-cb-radio-cb-28-uk-eu-80-channel-am-fm-multi-standard/) **Published:** February 13, 2025 **Author:** Jan **Content:** The **Midland 28 CB Radio** is a modern mid-range CB radio that combines **advanced features, excellent audio clarity and a large, easy-to-read display**. With **12/24V compatibility**, VOX hands-free operation and intelligent noise reduction, it’s built for drivers who want **reliable communication with enhanced usability**. --- ## 🚛 Built for Everyday & Professional Use ✔ Works on **12V & 24V systems** (cars, vans, HGVs) ✔ Compact yet feature-packed design ✔ Easy-to-read **2” colour LCD display** ✔ Ideal for both casual and regular CB users --- ## 🎨 Large Colour Display One of the standout features: - **2” LCD screen** (twice the size of older models) - **7 selectable colours** - **3 brightness levels** Clear visibility in all lighting conditions — day or night. --- ## 🎤 Hands-Free VOX Operation - Built-in **VOX function (5 levels)** - Transmit automatically when you speak - Safer and more convenient while driving --- ## 🔊 Clear Audio & Noise Control - **Digital automatic squelch (5 levels)** - Manual squelch option - **3-stage noise suppression** - RF Gain (7 levels) for fine tuning Designed to give **clean, intelligible communication** even in noisy environments. --- ## Key Features - 4W Output Power (legal standard) - AM / FM operation - Multi-standard European bands - VOX hands-free function - Digital & manual squelch - Noise reduction system (3 levels) - RF Gain control - S-meter - Emergency channels 9 / 19 - External speaker connection - 6-pin microphone with UP/DOWN controls --- ## Technical Specifications - **Frequency Range:** - FM: 26.565 – 27.99125 MHz - AM: 26.965 – 27.405 MHz - **Power Supply:** 12V / 24V - **Operating Temperature:** -10°C to +55°C - **Dimensions:** 114 x 43 x 180 mm - **Weight:** 499 g --- ## Why Choose the Midland 28? This radio is ideal if you want: ✔ A **larger, clearer display** than entry-level models ✔ Modern features like VOX and digital squelch ✔ Strong audio clarity with noise reduction ✔ Reliable Midland performance --- ## Ideal For - Truck drivers (HGV / TIR) - Vans and work vehicles - Everyday CB users - Drivers upgrading from basic radios ## Straight Talking If you want a **step up from basic CB radios with better visibility and cleaner audio**, the Midland 28 is a solid choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/midland-cb-radio-cb-28-uk-eu-80-channel-am-fm-multi-standard/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/midland-cb-radio-cb-28-uk-eu-80-channel-am-fm-multi-standard/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/midland-cb-radio-cb-28-uk-eu-80-channel-am-fm-multi-standard/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/midland-cb-radio-cb-28-uk-eu-80-channel-am-fm-multi-standard/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20CB%20Radio%20Midland%20CB28%20UK40%20EU40%20AM%2FFM&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmidland-cb-radio-cb-28-uk-eu-80-channel-am-fm-multi-standard%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/midland-cb-radio-cb-28-uk-eu-80-channel-am-fm-multi-standard/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/midland-cb-radio-cb-28-uk-eu-80-channel-am-fm-multi-standard/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/midland-cb-radio-cb-28-uk-eu-80-channel-am-fm-multi-standard/?share=telegram) - **Product categories:** Midland --- ### [Dual Band SWR/Power Meter VHF UHF 120/500MHz](https://cbradio.co.uk/product/dual-band-swr-power-meter-vhf-uhf-120-500mhz/) **Published:** May 19, 2025 **Author:** Jan **Content:** A must-have tool for any VHF/UHF setup. This **Dual Band SWR Meter 2m 70cm** allows you to **check and tune your antenna (SWR)** across both the **2m and 70cm bands**, helping you get maximum performance while protecting your radio. --- ## ⚠️ Why You Need an SWR Meter Running your radio without checking SWR can: ❌ Damage your transmitter ❌ Reduce signal range ❌ Cause poor audio and performance ✔ This meter helps ensure your setup is **safe, efficient and properly tuned** --- ## 📡 Designed for VHF & UHF - Covers **120 – 500 MHz** - Suitable for **2m (144 MHz) and 70cm (430 MHz) bands** - Ideal for amateur radio and mobile setups --- ## Key Features - Measures **SWR (VSWR)** - Reads **Forward & Reflected Power** - Power range up to **100 Watts** - Standard **SO-239 connections** - Compact, easy-to-use design --- ## Technical Specifications - **Frequency Range:** 120 – 500 MHz - **Impedance:** 52 Ohms - **Power Range:** 0 – 100 Watts - **Functions:** Forward Power / Reflected Power / VSWR - **Connectors:** SO-239 --- ## ⚠️ Important Information - Supplied in **retail packaging with instructions** - **Patch lead NOT included** (required for connection) --- ## Ideal For - Amateur radio operators - 2m / 70cm mobile setups - Antenna tuning and testing - Protecting your radio equipment --- ## Straight Talking At this price, it’s a **simple bit of kit that can save your radio from serious damage**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/dual-band-swr-power-meter-vhf-uhf-120-500mhz/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/dual-band-swr-power-meter-vhf-uhf-120-500mhz/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/dual-band-swr-power-meter-vhf-uhf-120-500mhz/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/dual-band-swr-power-meter-vhf-uhf-120-500mhz/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Dual%20Band%20SWR%2FPower%20Meter%20VHF%20UHF%20120%2F500MHz&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fdual-band-swr-power-meter-vhf-uhf-120-500mhz%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/dual-band-swr-power-meter-vhf-uhf-120-500mhz/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/dual-band-swr-power-meter-vhf-uhf-120-500mhz/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/dual-band-swr-power-meter-vhf-uhf-120-500mhz/?share=telegram) - **Product categories:** SWR meters --- ### [AV-400 140-525MHz 5-400W SO239 SWR Power Meter](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/) **Published:** May 19, 2025 **Author:** Jan **Content:** The **AV-400 SWR & Power Meter** is a reliable, high-power meter designed for **VHF and UHF operators** who need accurate readings and easy usability. Covering **140–525 MHz**, this meter is ideal for testing and tuning antennas across a wide range of applications, with support for power levels up to **400 watts**. --- ## 📡 Built for VHF & UHF Performance ✔ Wide frequency coverage (140–525 MHz) ✔ Handles up to **400W power** ✔ Large, clear analogue meter ✔ Easy-to-read SWR and power measurements Perfect for base stations, mobile setups and workshop use. --- ## 🔍 Accurate & Reliable Readings Designed to give dependable measurements across multiple power ranges: - **5W range:** ±5% accuracy - **20W range:** ±7.5% accuracy - **200W range:** ±10% accuracy - **400W range:** ±12.5% accuracy A solid tool for tuning and protecting your equipment. --- ## ⚠️ Brand Note (Important) We supply one of the following brands depending on stock: - Sharman - Moonraker - Avair ✔ **All units are identical internally** ✔ Manufactured by **Avair** ✔ Same performance, same build quality — only the badge differs --- ## Key Features - Frequency Range: **140 – 525 MHz** - Power Ranges: **5W / 20W / 200W / 400W** - SWR Measurement Function - Large analogue display for easy reading - 13.8V DC backlight lamp - Compact and robust design --- ## Technical Specifications - **Frequency Range:** 140 – 525 MHz - **Power Handling:** Up to 400W - **Accuracy:** 5% – 12.5% depending on range - **Power Supply (Lamp):** 13.8V DC - **Dimensions:** 155 x 63 x 103 mm - **Weight:** 720g --- ## Ideal For - VHF/UHF radio users - Amateur radio operators - Antenna tuning and testing - Workshop and installation use --- ## Why Choose This Meter? ✔ Reliable, proven design ✔ Wide frequency coverage ✔ Handles high power safely ✔ Excellent value for money ✔ Clear, easy-to-read display ## Straight Talking If you need a **solid, no-nonsense SWR & power meter for VHF/UHF**, this does exactly what it should — accurately and reliably. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20AV-400%20140-525MHz%205-400W%20SO239%20SWR%20Power%20Meter&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fav-400-140-525mhz-5-400w-so239-swr-power-meter%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/av-400-140-525mhz-5-400w-so239-swr-power-meter/?share=telegram) - **Product categories:** SWR meters --- ### [Midland m-mini USB UK/EU AM FM multi standard](https://cbradio.co.uk/product/midland-cb-radio-m-mini-usb-uk-eu-am-fm/) **Published:** June 20, 2025 **Author:** Jan **Content:** The **Midland M-Mini CB Radio** is one of the smallest CB radios on the market — designed to deliver **full performance in a compact, affordable package**. Perfect for modern vehicles, this radio combines **multi-standard European operation, VOX hands-free communication and advanced noise control** in a unit small enough to fit almost anywhere. --- ## 🚗 Ultra Compact – Easy Installation ✔ Extremely small size (just 102 x 100 x 25 mm) ✔ Lightweight and easy to mount ✔ Ideal for tight dashboards and modern interiors ✔ Plug-and-play via cigarette lighter socket A perfect solution where space is limited. --- ## 🌍 Multi-Standard European Operation - Covers **26.565 – 27.99125 MHz** - Works across **all major European bands** - Direct access to **emergency channels 9 & 19** Ideal for both UK and international use. --- ## 🎤 Smart Microphone Control The supplied microphone features: - **UP / DOWN channel selection** - **Lock function** - Improved microphone capsule for **clearer audio modulation** Simple, fast control without distraction. --- ## 🔊 Clear Communication Features - Dual squelch system: **Manual + DS (5 levels)** - **RF Gain (7 levels)** for cleaner reception - VOX hands-free function (5 levels adjustable) Designed to minimise noise and maximise clarity. --- ## 🎨 Modern Display - Multi-colour LCD display (**7 colours**) - Built-in **S-meter** - Clear, easy-to-read layout Looks modern and performs in all lighting conditions. --- ## Key Features - 4W Output Power (legal standard) - AM / FM operation - Multi-standard European bands - VOX hands-free function - Dual squelch (Manual + DS) - RF Gain adjustment - Channel 9 / 19 quick access - Multi-colour display - External speaker socket --- ## Technical Specifications - **Frequency Range:** 26.565 – 27.99125 MHz - **Modes:** AM / FM - **Power Output:** 4W - **Dimensions:** 102 x 100 x 25 mm - **Weight:** 450 g - **Power Supply:** 12V (cigarette lighter plug included) --- ## Why Choose the M-Mini? This radio is ideal if you want: ✔ A compact, discreet CB setup ✔ Modern features in a small unit ✔ Easy installation without wiring hassle ✔ Reliable Midland performance --- ## Ideal For - Cars and vans with limited space - Everyday drivers - European travel - Users wanting a simple but capable CB ## Straight Talking If you want a **small, modern CB radio that’s easy to install and does everything you need**, the M-Mini is a brilliant choice. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/midland-cb-radio-m-mini-usb-uk-eu-am-fm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/midland-cb-radio-m-mini-usb-uk-eu-am-fm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/midland-cb-radio-m-mini-usb-uk-eu-am-fm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/midland-cb-radio-m-mini-usb-uk-eu-am-fm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Midland%20m-mini%20USB%20UK%2FEU%20AM%20FM%20multi%20standard&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmidland-cb-radio-m-mini-usb-uk-eu-am-fm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/midland-cb-radio-m-mini-usb-uk-eu-am-fm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/midland-cb-radio-m-mini-usb-uk-eu-am-fm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/midland-cb-radio-m-mini-usb-uk-eu-am-fm/?share=telegram) - **Product categories:** Midland --- ### [President McKinley AM-FM-SSB CB Radio](https://cbradio.co.uk/product/president-mckinley-am-fm-ssb-cb-radio/) **Published:** June 20, 2025 **Author:** Jan **Content:** The **President McKinley CB Radio** is a high-performance, multi-mode CB designed for users who want **more range, more control and premium build quality**. Built to President’s renowned standards, the McKinley delivers **AM, FM and full SSB (USB/LSB)** capability — making it one of the most versatile legal CB radios available in the UK and Europe. --- ## 🔥 AM / FM / SSB – Serious Performance ✔ AM & FM for everyday communication ✔ **USB / LSB sideband** for extended range ✔ 4W AM/FM + **12W SSB output** If you want stronger long-distance communication, SSB makes a real difference. --- ## 🚛 Designed for Professional Installations - **DIN size chassis** – fits standard vehicle slots - 12V & 24V operation (ideal for HGVs) - Solid, high-quality construction - Clean, integrated dashboard look Perfect for trucks, vans and professional setups. --- ## 🎛 Advanced Features & Control The McKinley gives you full control over your setup: - **ASC (Automatic Squelch Control)** + Manual Squelch - Built-in SWR meter - VOX hands-free function - Dual Watch (monitor two channels) - 5 memory channels + scan - Built-in echo function - Dynamic / Electret microphone compatibility --- ## 🎨 Modern Display - Large LCD screen - **7 selectable colour options** - Clear frequency and channel display Easy to read in all conditions. --- ## Key Features - 40 Channels AM / FM / USB / LSB - UK + EU multi-standard operation - 4W AM/FM / 12W SSB output - VOX hands-free operation - ASC + Manual Squelch - Dual Watch - Memory channels with scan - Built-in SWR meter - Echo function - Multi-colour display (7 colours) --- ## Technical Overview - **Frequency Bands:** UK & CEPT - **Power Supply:** 13.2V / 24V - **Dimensions:** 170 x 150 x 52 mm (DIN size) - **Weight:** 1.1 kg - **Microphone:** Up/Down type included - **Antenna Connector:** SO-239 (PL Female) --- ## What’s in the Box? - President McKinley CB Radio - Microphone with UP/DOWN controls - Mounting cradle & screws - Fused power lead --- ## Why Choose the McKinley? This is a **serious step up from standard CB radios**: ✔ SSB for longer range ✔ Premium build quality ✔ Advanced features without being complicated ✔ Ideal for both hobbyists and professionals --- ## Ideal For - Experienced CB users - Long-distance operators - Truck drivers wanting premium equipment - 4×4 and off-road setups - Users upgrading from basic radios ## Straight Talking If you want a **top-tier CB radio with real performance gains**, the McKinley delivers — especially when paired with a quality antenna. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-mckinley-am-fm-ssb-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-mckinley-am-fm-ssb-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-mckinley-am-fm-ssb-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-mckinley-am-fm-ssb-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20President%20McKinley%20AM-FM-SSB%20CB%20Radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-mckinley-am-fm-ssb-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-mckinley-am-fm-ssb-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-mckinley-am-fm-ssb-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-mckinley-am-fm-ssb-cb-radio/?share=telegram) - **Product categories:** President --- ### [President Jimmy 3 AM/FM CB radio](https://cbradio.co.uk/product/president-jimmy-3-am-fm-cb-radio/) **Published:** June 20, 2025 **Author:** Jan **Content:** The **President Jimmy III CB Radio** is a compact, reliable CB radio designed for **straightforward communication without unnecessary complexity**. Built with **President’s proven quality and modern electronics**, the Jimmy III is the perfect choice for users who want a dependable radio that simply gets the job done. --- ## 🚗 Compact & Practical Design ✔ Small footprint – ideal for tight installations ✔ Front microphone socket for easy access ✔ Clear multifunction LCD display ✔ Simple, user-friendly controls Perfect for cars, vans and trucks where space is limited. --- ## 🔊 Reliable Everyday Performance The Jimmy III delivers solid CB performance with: - Stable AM/FM operation - Clear transmit and receive audio - Manual squelch control for noise adjustment - Easy channel selection via up/down controls A true “fit and forget” CB radio. --- ## Key Features - 40 Channels - AM / FM operation - Compact mobile design - Front 6-pin microphone socket - Multifunction LCD display - Manual squelch - Volume control with ON/OFF - Up/Down channel selector --- ## Technical Specifications - **Frequency Range:** 26.965 – 27.405 MHz - **Channels:** 40 - **Modes:** AM / FM - **Antenna Impedance:** 50 Ohms - **Power Supply:** 13.2V - **Dimensions:** 115 x 130 x 45 mm - **Weight:** 0.56 kg --- ## Why Choose the Jimmy III? This radio is ideal if you want: ✔ Simple operation ✔ Reliable performance ✔ Compact size for easy installation ✔ Trusted President build quality No unnecessary extras — just a solid CB radio that works. --- ## Ideal For - First-time CB users - Everyday drivers - Vans and work vehicles - Basic communication setups - Users wanting a simple, no-fuss radio ## Straight Talking If you want a **simple, reliable CB radio without complications**, the Jimmy III is a great choice from a trusted brand. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-jimmy-3-am-fm-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-jimmy-3-am-fm-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-jimmy-3-am-fm-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-jimmy-3-am-fm-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20President%20Jimmy%203%20AM%2FFM%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-jimmy-3-am-fm-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-jimmy-3-am-fm-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-jimmy-3-am-fm-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-jimmy-3-am-fm-cb-radio/?share=telegram) - **Product categories:** President --- ### [President Taylor IV CB Radio12/24V AM/FM | VOX | USB | ASC](https://cbradio.co.uk/product/president-taylor-4/) **Published:** June 20, 2025 **Author:** Jan **Content:** The **President Taylor IV CB Radio** is a modern evolution of a classic — combining **President’s trusted reliability** with updated features designed for today’s drivers. Now with **12/24V compatibility, VOX hands-free operation, USB charging and a 7-colour display**, the Taylor IV delivers everything you need in a practical, easy-to-use CB radio. --- ## 🚛 Built for Modern Driving ✔ **12V & 24V operation** – ideal for cars, vans and HGVs ✔ Compact, durable design ✔ Front microphone socket for easy access ✔ Clear LCD display with **7 colour options** A perfect balance of simplicity and modern functionality. --- ## 🎤 NEW VOX Hands-Free Function One of the standout upgrades: - **VOX (Voice Activation)** allows hands-free transmission - Ideal for safer driving - No need to press the microphone to transmit Perfect for busy drivers who need convenience and control. --- ## 🔊 Clear Audio with ASC - **ASC (Automatic Squelch Control)** reduces background noise automatically - Manual squelch for fine adjustment - ANL / NB / HI-CUT filters for cleaner audio Reliable, clear communication in all driving conditions. --- ## Key Features - 40 Channels AM / FM - 4W Output Power (legal standard) - VOX hands-free operation - ASC + Manual Squelch - Multi-colour display (7 colours) - USB 5V 2.1A charging port - Channel scan - Dual emergency channels (EMG 1/2) - Roger Beep - Talkback function - Public Address (PA) mode - Built-in SWR meter (Power/SWR reading) - Front microphone socket - External speaker connection --- ## Technical Specifications **General** - Channels: 40 - Frequency Range: 26.965 – 27.405 MHz - Modes: AM / FM - Power Output: 4W AM / 4W FM - Power Supply: 12V / 24V - Dimensions: 150 x 165 x 45 mm - Weight: 750g - Antenna Impedance: 50 Ohms **Performance** - Sensitivity: 0.5 µV (20dB SINAD) - Audio Output: 5W - Adjacent Channel Selectivity: 60 dB - Frequency Tolerance: ±300 Hz - Current Consumption: 1.7A (TX), 500–800mA (RX) --- ## Why Choose the Taylor IV? The Taylor IV is ideal if you want: ✔ A trusted, well-known CB platform ✔ Modern features without complexity ✔ Hands-free VOX operation ✔ Strong, clear audio performance It’s a **serious upgrade over older CB radios**, while still being easy to use. --- ## Ideal For - Truck drivers (HGV / TIR) - Vans and work vehicles - Everyday CB users - Drivers upgrading from older models - Users wanting VOX hands-free operation ## Straight Talking If you want a **reliable CB radio with modern upgrades like VOX and USB**, the Taylor IV is one of the best all-rounders available. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-taylor-4/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-taylor-4/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-taylor-4/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-taylor-4/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20President%20Taylor%20IV%20CB%20Radio12%2F24V%20AM%2FFM%20%7C%20VOX%20%7C%20USB%20%7C%20ASC&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-taylor-4%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-taylor-4/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-taylor-4/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-taylor-4/?share=telegram) - **Product categories:** President --- ### [President HARRISON II AM/FM 12/24](https://cbradio.co.uk/product/president-harrison-ii-am-fm-12-24/) **Published:** June 20, 2025 **Author:** Jan **Content:** The **President Harrison II CB Radio** is a modern, easy-to-use CB radio designed for **reliable everyday communication** in cars, vans and trucks. With **12/24V compatibility**, built-in **ASC (Automatic Squelch Control)** and a clear multi-colour display, the Harrison II delivers strong performance without unnecessary complexity. --- ## 🚛 Built for Everyday Use ✔ Works on **12V & 24V systems** (ideal for HGVs) ✔ Compact, durable design ✔ Front microphone socket for easy access ✔ Clear digital display with **7 colour options** Designed to be simple, practical and dependable. --- ## 🔊 Clear Communication with ASC The Harrison II features **Automatic Squelch Control (ASC)**: - Automatically reduces background noise - Improves clarity without constant adjustment - Ideal for driving conditions Also includes **manual squelch** for full control when needed. --- ## Key Features - 40 Channels AM / FM - 12V / 24V operation - ASC (Automatic Squelch Control) - Manual Squelch adjustment - ANL filter (noise reduction) - Roger Beep - USB 5V output (device charging) - UP/DOWN channel selector - Front microphone socket (6-pin) - Multi-colour display (7 colours) - Channel preselection - F-key menu access --- ## Technical Specifications - **Channels:** 40 - **Frequency Range:** 26.965 – 27.405 MHz - **Modes:** AM / FM - **Output Power:** 5 Watts - **Antenna Impedance:** 50 Ohms - **Power Supply:** 12V / 24V - **Dimensions:** 125 x 165 x 45 mm - **Weight:** 0.9 kg - **Microphone:** 6-pin (Electret/Dynamic compatible) - **Antenna Connector:** SO-239 (PL Female) --- ## Why Choose the Harrison II? This radio hits the sweet spot between **simplicity and modern features**: - Easy to use straight out of the box - Clear audio with minimal setup - Reliable President build quality - Useful extras like USB charging Perfect if you want a **no-fuss CB that just works**. --- ## Ideal For - Truck drivers (HGV / TIR) - Vans and work vehicles - Everyday CB users - Anyone upgrading from older radios ## Straight Talking If you want a **reliable, easy-to-use CB radio with modern features**, the Harrison II is a solid choice from a trusted brand. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-harrison-ii-am-fm-12-24/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-harrison-ii-am-fm-12-24/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-harrison-ii-am-fm-12-24/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-harrison-ii-am-fm-12-24/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20President%20HARRISON%20II%20AM%2FFM%2012%2F24&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-harrison-ii-am-fm-12-24%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-harrison-ii-am-fm-12-24/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-harrison-ii-am-fm-12-24/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-harrison-ii-am-fm-12-24/?share=telegram) - **Product categories:** President --- ### [President George 2 Multimode CB radio](https://cbradio.co.uk/product/president-george-2-multimode-cb-radio/) **Published:** June 20, 2025 **Author:** Jan **Content:** Welcome to the next generation of CB communication. The **President George II CB Radio** represents a major step forward in CB technology — combining **cutting-edge electronics, advanced features and exceptional audio quality** into one powerful unit. Designed for demanding users, this is not just a CB radio — it’s a **serious communication tool** for those who expect more. --- ## 🔥 AM / FM / SSB – Maximum Capability Unlike standard CB radios, the George II includes: ✔ **AM & FM modes** for everyday use ✔ **SSB (USB / LSB)** for extended range communication ✔ Greater efficiency and long-distance performance If you want to push beyond basic CB limits, this is where it starts. --- ## 🎯 Built for Performance & Control The George II gives you full control over your signal: - RF Gain control - Microphone Gain adjustment - Clarifier (fine frequency tuning) - Built-in SWR meter - Channel scan function - Dual Watch (monitor two channels) Everything you need for precise, high-quality communication. --- ## 🎨 Modern Display & Customisation - Large, clear LCD display - **7 selectable colour options** - Easy-to-read layout in all lighting conditions Built for both day and night driving. --- ## Advanced Features - 4W output (standard CB modes) - AM / FM / USB / LSB operation - 38 CTCSS tones + 104 DCS codes - Roger Beep (end of transmission tone) - 4 memory channels - Automatic channel scan - Dual Watch function - Antenna SWR meter built-in --- ## Why Choose the President George II? This radio is designed for users who want: ✔ More range (SSB capability) ✔ More control over audio and signal ✔ More features than standard CB radios ✔ Premium build quality and reliability It’s ideal for enthusiasts, professionals and anyone serious about CB communication. --- ## Ideal For - Advanced CB users - Long-distance operators (SSB use) - Truck drivers wanting premium equipment - 4×4 and off-road communication setups - Users upgrading from entry-level radios ## Straight Talking If a basic CB radio isn’t enough anymore, this is the upgrade. The **President George II** gives you **more range, more control, and a completely different level of performance**. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/president-george-2-multimode-cb-radio/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/president-george-2-multimode-cb-radio/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/president-george-2-multimode-cb-radio/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/president-george-2-multimode-cb-radio/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20President%20George%202%20Multimode%20CB%20radio&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpresident-george-2-multimode-cb-radio%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/president-george-2-multimode-cb-radio/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/president-george-2-multimode-cb-radio/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/president-george-2-multimode-cb-radio/?share=telegram) - **Product categories:** President --- ### [PNI Escort HP 6800 UK/EU AM FM USB MP3 Player](https://cbradio.co.uk/product/pni-escort-hp6800-uk-eu-am-fm-usb-mp3-player/) **Published:** June 20, 2025 **Author:** Jan **Content:** The **PNI Escort HP 6800 ASQ CB Radio** is a feature-packed mobile CB designed for drivers who want **reliable communication plus modern convenience**. With **12/24V operation**, built-in **USB charging**, and even an **MP3 player function**, this radio goes beyond basic CB — making it ideal for trucks, vans and everyday vehicles. --- ## 🚛 Built for the Road ✔ Works on **12V & 24V systems** (perfect for HGVs) ✔ Supplied with **cigarette lighter plug** for easy installation ✔ Compact, practical design ✔ Clear display and simple controls Plug in and go — no complicated setup required. --- ## 🔊 More Than Just a CB Radio The HP 6800 adds useful everyday features: - **USB port with charging function** – keep your phone powered - **MP3 playback capability** – added convenience on long drives - **Automatic Squelch (ASQ)** – reduces background noise - **Manual Squelch control** for fine tuning --- ## 🌍 Multi-Standard European Use Supports multiple country standards: **D / EU / EC / UK / PL / E / US** Perfect for international drivers — simply select the correct norm to match local regulations. --- ## Key Features - 4 Watt Output Power (legal CB standard) - AM / FM operation - Automatic Squelch (ASQ) - USB charging port - MP3 player function - Multi-standard European bands - Cigarette lighter plug included - Compact and easy to install --- ## Technical Overview - **Power Supply:** 12V / 24V - **Output Power:** 4W - **Modes:** AM / FM - **Bands:** Multi-norm (EU/UK/US etc.) - **Connectivity:** USB (charging + MP3 support) --- ## Ideal For - Truck drivers (HGV / TIR) - Vans and work vehicles - Everyday drivers wanting simple CB setup - European travel and cross-border use --- ## Why Choose the HP 6800? This radio stands out by combining: - **Reliable CB communication** - **Practical in-car features** - **Easy plug-and-play installation** A great choice if you want **functionality without overcomplication**. --- ## SEO Keywords Naturally Included CB radio 12/24V, truck CB radio UK, CB radio with USB charger, PNI HP6800, AM FM CB radio, multi standard CB radio, CB radio with MP3, mobile CB radio UK. --- ## Straight Talking If you want a **no-nonsense CB radio with useful extras for everyday driving**, this is a solid all-rounder. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/pni-escort-hp6800-uk-eu-am-fm-usb-mp3-player/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/pni-escort-hp6800-uk-eu-am-fm-usb-mp3-player/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/pni-escort-hp6800-uk-eu-am-fm-usb-mp3-player/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/pni-escort-hp6800-uk-eu-am-fm-usb-mp3-player/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20PNI%20Escort%20HP%206800%20UK%2FEU%20AM%20FM%20USB%20MP3%20Player&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fpni-escort-hp6800-uk-eu-am-fm-usb-mp3-player%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/pni-escort-hp6800-uk-eu-am-fm-usb-mp3-player/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/pni-escort-hp6800-uk-eu-am-fm-usb-mp3-player/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/pni-escort-hp6800-uk-eu-am-fm-usb-mp3-player/?share=telegram) - **Product categories:** PNI --- ### [Echo Power mic Microphone for CB Radio with 6 Pin Plug](https://cbradio.co.uk/product/echo-power-mic-microphone-for-cb-radio-with-6-pin-plug/) **Published:** February 13, 2020 **Author:** Jan **Content:** The **K-PO Echo Power Microphone** is a powerful upgrade over standard CB microphones, designed to give you **louder, clearer and more commanding audio** on the air. With built-in echo and amplification, this mic ensures your transmission cuts through background noise — ideal for truck cabs, 4x4s and busy channels where clarity matters. --- ## Built to Be Heard A standard CB mic can sound flat and weak. The K-PO Echo Power Mic transforms your audio by: - Increasing transmit strength - Improving clarity and presence - Adding adjustable echo for a fuller sound Whether you’re on the motorway or off-road, this mic makes sure you’re heard properly. --- ## Key Features - **Echo Function** – Adds depth and presence to your voice - **Power Microphone** – Boosted transmit audio output - **6 Pin Plug** – Standard fit for many CB radios - **Rewirable** – Can be adapted to suit other radio brands - **Solid Handheld Design** – Built for daily use --- ## Compatibility Supplied with a **6-pin connector**, suitable for many popular CB radios including TTI, Midland and others. ✔ Can be easily rewired if required ✔ Suitable for both mobile and base station setups --- ## Condition - **Brand new microphone** - Packaging may be **slightly marked or worn** This does not affect performance — just means you get a **better deal**. --- ## Ideal For - Truck drivers needing stronger audio - 4×4 and off-road users - CB enthusiasts upgrading from stock microphones - Anyone struggling with weak or unclear transmission --- ## Why Buy From cbradio.co.uk? - UK stock – fast dispatch - Trusted CB specialists - Quality gear that performs - Real-world tested products --- ## Straight Talking If you want **louder, clearer audio without changing your radio**, this is one of the simplest and most effective upgrades you can make. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/echo-power-mic-microphone-for-cb-radio-with-6-pin-plug/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/echo-power-mic-microphone-for-cb-radio-with-6-pin-plug/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/echo-power-mic-microphone-for-cb-radio-with-6-pin-plug/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/echo-power-mic-microphone-for-cb-radio-with-6-pin-plug/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Echo%20Power%20mic%20Microphone%20for%20CB%20Radio%20with%206%20Pin%20Plug&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fecho-power-mic-microphone-for-cb-radio-with-6-pin-plug%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/echo-power-mic-microphone-for-cb-radio-with-6-pin-plug/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/echo-power-mic-microphone-for-cb-radio-with-6-pin-plug/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/echo-power-mic-microphone-for-cb-radio-with-6-pin-plug/?share=telegram) - **Product categories:** CB Radio Microphones --- ### [Escort HP 40 multistandard AM FM 12-24V](https://cbradio.co.uk/product/escort-hp-40-multistandard-am-fm-12-24v/) **Published:** August 19, 2025 **Author:** Jan **Content:** ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/escort-hp-40-multistandard-am-fm-12-24v/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/escort-hp-40-multistandard-am-fm-12-24v/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/escort-hp-40-multistandard-am-fm-12-24v/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/escort-hp-40-multistandard-am-fm-12-24v/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Escort%20HP%2040%20multistandard%20AM%20FM%2012-24V&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fescort-hp-40-multistandard-am-fm-12-24v%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/escort-hp-40-multistandard-am-fm-12-24v/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/escort-hp-40-multistandard-am-fm-12-24v/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/escort-hp-40-multistandard-am-fm-12-24v/?share=telegram) - **Product categories:** PNI --- ### [Superflexi 36" Super Flexible CB radio aerial Mobile Antenna](https://cbradio.co.uk/product/superflexi-36-super-flexible-cb-radio-aerial-mobile-antenna/) **Published:** February 13, 2020 **Author:** Jan **Content:** **Superflexi 36″ Super Flexible CB radio aerial Mobile Antenna** **This top loaded antenna really wacks out. much more flexible than the traditional firestick but with similar performance** **Key Features/Specifications:** - Type: Helical loaded CB antenna - Frequency: 27-28MHz - Length: 92cm - VSWR: 1.5:1 or better - Power: 200 Watts - Fitting: Standard 3/8th thread ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/superflexi-36-super-flexible-cb-radio-aerial-mobile-antenna/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/superflexi-36-super-flexible-cb-radio-aerial-mobile-antenna/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/superflexi-36-super-flexible-cb-radio-aerial-mobile-antenna/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/superflexi-36-super-flexible-cb-radio-aerial-mobile-antenna/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Superflexi%2036%22%20Super%20Flexible%20CB%20radio%20aerial%20Mobile%20Antenna&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsuperflexi-36-super-flexible-cb-radio-aerial-mobile-antenna%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/superflexi-36-super-flexible-cb-radio-aerial-mobile-antenna/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/superflexi-36-super-flexible-cb-radio-aerial-mobile-antenna/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/superflexi-36-super-flexible-cb-radio-aerial-mobile-antenna/?share=telegram) - **Product categories:** Modulators --- ### [small mini stinger cb aerial wing mount cable](https://cbradio.co.uk/product/small-mini-stinger-cb-aerial-wing-mount-cable-for-land-rover-defender-4x4-ariel/) **Published:** February 13, 2020 **Author:** Jan **Content:** Land Rover Defender Wing Mount CB aerial Kit complete with our Mini Stinger Off Road CB aerial . This is the Sirio DV type mount but then as a straight 3/8 thread. Our kit comes complete with High quality RG58u coax cable terminated with a PL-259 and our Black mini Stinger CB aerial. **Our stinger is Undoubtedly the most popular pre-tuned CB trucking antenna. virtually indestructible.** **The heavy duty open coil design and stainless steel whip gives this aerial that flexibility that off roaders. farmers and truckers require from this antenna.** There is enough Cable for both 110 and 90 as this mount is fitted on the front wing. Check our shop for our PSM-1 Kit if you want your CB antenna on the Back This mount can also be fitted to other 4×4 or trucks or high roof transit vans. ![](https://i0.wp.com/cbradio.co.uk/wp-content/uploads/2022/07/range5.jpg?ssl=1) ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/small-mini-stinger-cb-aerial-wing-mount-cable-for-land-rover-defender-4x4-ariel/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/small-mini-stinger-cb-aerial-wing-mount-cable-for-land-rover-defender-4x4-ariel/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/small-mini-stinger-cb-aerial-wing-mount-cable-for-land-rover-defender-4x4-ariel/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/small-mini-stinger-cb-aerial-wing-mount-cable-for-land-rover-defender-4x4-ariel/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20small%20mini%20stinger%20cb%20aerial%20wing%20mount%20cable&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fsmall-mini-stinger-cb-aerial-wing-mount-cable-for-land-rover-defender-4x4-ariel%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/small-mini-stinger-cb-aerial-wing-mount-cable-for-land-rover-defender-4x4-ariel/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/small-mini-stinger-cb-aerial-wing-mount-cable-for-land-rover-defender-4x4-ariel/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/small-mini-stinger-cb-aerial-wing-mount-cable-for-land-rover-defender-4x4-ariel/?share=telegram) - **Product categories:** CB Aerials with mount --- ### [50m RG213 MIL SPEC 50 OHM low loss Coax Cable 50 metre Drum](https://cbradio.co.uk/product/50m-rg213-mil-spec-50-ohm-low-loss-coax-cable-50-metre-drum/) **Published:** February 13, 2020 **Author:** Jan **Content:** 50m RG213 MIL SPEC 50 OHM low loss Coax Cable 50 metre Drum 50 metres of our HIGH QUALITY mil spec RG-213U (MIL-C-17-G) Our Low Loss RG213U has a Thick copper mesh woven 95% braid This coax is suitable for all transmission applications like: - CB radio - HAM Radio - Taxi Antennas or any application where low loss cable is required **Specifications:** - Size: 9mm (9.65mm) Military spec - Impedance: 50 Ohms - Core: 7 X 0.72mm - Braid: 98% 192 X 0.20 - Loss per 10M @ 100MHz: 0.7dBd - Colour black ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/50m-rg213-mil-spec-50-ohm-low-loss-coax-cable-50-metre-drum/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/50m-rg213-mil-spec-50-ohm-low-loss-coax-cable-50-metre-drum/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/50m-rg213-mil-spec-50-ohm-low-loss-coax-cable-50-metre-drum/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/50m-rg213-mil-spec-50-ohm-low-loss-coax-cable-50-metre-drum/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%2050m%20RG213%20MIL%20SPEC%2050%20OHM%20low%20loss%20Coax%20Cable%2050%20metre%20Drum&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2F50m-rg213-mil-spec-50-ohm-low-loss-coax-cable-50-metre-drum%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/50m-rg213-mil-spec-50-ohm-low-loss-coax-cable-50-metre-drum/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/50m-rg213-mil-spec-50-ohm-low-loss-coax-cable-50-metre-drum/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/50m-rg213-mil-spec-50-ohm-low-loss-coax-cable-50-metre-drum/?share=telegram) - **Product categories:** RG213 --- ### [Ceramic rear brake pads Toyota Landcruiser 4.2 VX HDJ80 1HD-T 90/98](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/) **Published:** February 13, 2020 **Author:** Jan **Content:** Ceramic rear brake pads Toyota Landcruiser 4.2 VX HDJ80 1HD-T 90/98 a set of: Rear Brake pads for the Toyota Land Cruiser 4.2 TD HDJ80. These are High Quality after Market pads which meet or exceed OE quality. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Ceramic%20rear%20brake%20pads%20Toyota%20Landcruiser%204.2%20VX%20HDJ80%201HD-T%2090%2F98&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/ceramic-rear-brake-pads-toyota-landcruiser-4-2-vx-hdj80-1hd-t-90-98/?share=telegram) - **Product categories:** Land Cruiser --- ### [Toyota Landcruiser 4.2 TD set of new front prop-shaft UJ'S HDJ80 universal joint](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-front-prop-shaft-ujs-hdj80-universal-joint/) **Published:** February 13, 2020 **Author:** Jan **Content:** Toyota Landcruiser 4.2 TD set of new front prop-shaft UJ’S HDJ80 universal joint Set of Quality TOYO Universal Joints for the front prop shaft. ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-front-prop-shaft-ujs-hdj80-universal-joint/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-front-prop-shaft-ujs-hdj80-universal-joint/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-front-prop-shaft-ujs-hdj80-universal-joint/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-front-prop-shaft-ujs-hdj80-universal-joint/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Toyota%20Landcruiser%204.2%20TD%20set%20of%20new%20front%20prop-shaft%20UJ%27S%20HDJ80%20universal%20joint&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Ftoyota-landcruiser-4-2-td-set-of-new-front-prop-shaft-ujs-hdj80-universal-joint%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-front-prop-shaft-ujs-hdj80-universal-joint/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-front-prop-shaft-ujs-hdj80-universal-joint/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/toyota-landcruiser-4-2-td-set-of-new-front-prop-shaft-ujs-hdj80-universal-joint/?share=telegram) - **Product categories:** Land Cruiser --- ### [Multi-meter Test Probe Leads 2mm](https://cbradio.co.uk/product/multi-meter-test-probe-leads-2mm/) **Published:** February 13, 2020 **Author:** Jan **Content:** Pair of 2mm Test Leads. - Ideal replacements for use with multimeters fitted with 2mm sockets - Moulded leads supplied in pairs. red and black - Terminated in heavy duty moulded PVC test prods - 900mm long ### Share this: - [ Share on Facebook (Opens in new window) Facebook](https://cbradio.co.uk/product/multi-meter-test-probe-leads-2mm/?share=facebook) - [ Share on X (Opens in new window) X](https://cbradio.co.uk/product/multi-meter-test-probe-leads-2mm/?share=x) - [ Share on WhatsApp (Opens in new window) WhatsApp](https://cbradio.co.uk/product/multi-meter-test-probe-leads-2mm/?share=jetpack-whatsapp) - [ Print (Opens in new window) Print](https://cbradio.co.uk/product/multi-meter-test-probe-leads-2mm/#print?share=print) - [ Email a link to a friend (Opens in new window) Email](mailto:?subject=%5BShared%20Post%5D%20Multi-meter%20Test%20Probe%20Leads%202mm&body=https%3A%2F%2Fcbradio.co.uk%2Fproduct%2Fmulti-meter-test-probe-leads-2mm%2F&share=email) - [ Share on Nextdoor (Opens in new window) Nextdoor](https://cbradio.co.uk/product/multi-meter-test-probe-leads-2mm/?share=nextdoor) - [ Share on Pinterest (Opens in new window) Pinterest](https://cbradio.co.uk/product/multi-meter-test-probe-leads-2mm/?share=pinterest) - [ Share on Telegram (Opens in new window) Telegram](https://cbradio.co.uk/product/multi-meter-test-probe-leads-2mm/?share=telegram) - **Product categories:** Tools --- ## Categories ### [Uncategorised](https://cbradio.co.uk/category/uncategorised/) **Description:** Browse uncategorised products and articles at CB Radio UK. Find a variety of items to suit your communication needs. --- ## Product categories ### [CB Radio Microphones](https://cbradio.co.uk/product-category/cb-radio-accessories/cb-radio-microphones/) **Description:** Browse CB radio microphones at CB Radio UK. Choose from a variety of models designed for optimal sound clarity & performance. Shop CB radio microphones today. --- ### [Coax Cable](https://cbradio.co.uk/product-category/coax-cable/) **Description:** Shop coax cables for your CB radio setup at CB Radio UK. Find durable, high-quality cables to optimise your signal transmission. --- ### [Linear Amplifiers](https://cbradio.co.uk/product-category/linear-amplifiers/) **Description:** Boost your CB radio signal with linear amplifiers from CB Radio UK. Find high-quality linear amplifiers for improved communication range. --- ### [CB Aerials](https://cbradio.co.uk/product-category/cb-aerials/) **Description:** Find high-performance CB aerials at CB Radio UK. Choose from a variety of models to improve your communication experience. --- ### [Land Cruiser](https://cbradio.co.uk/product-category/car-parts/land-cruiser/) --- ### [CB Radio Accessories](https://cbradio.co.uk/product-category/cb-radio-accessories/) **Description:** Discover a wide selection of CB radio accessories at CB Radio UK. Enhance your communication experience with quality add-ons. --- ### [CB Radios](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/) **Description:** Shop CB radio equipment by Midland, PNI, and President at CB Radio UK. Find top-quality CB radio equipment for reliable communication in various environments. --- ### [Plugs and Connectors](https://cbradio.co.uk/product-category/plugs-and-connectors/) **Description:** Find plugs and connectors for your CB radio system at CB Radio UK. Shop quality connectors to ensure a secure and stable connection. --- ### [RF Adaptors](https://cbradio.co.uk/product-category/plugs-and-connectors/rf-adaptors/) **Description:** Shop RF adaptors at CB Radio UK. Find quality adaptors to connect different radio systems for better performance. --- ### [Clearance](https://cbradio.co.uk/product-category/clearance/) **Description:** Browse clearance items at CB Radio UK. Grab great deals on CB radios, accessories, and more while stocks last. --- ### [CB Radio Starter Kits](https://cbradio.co.uk/product-category/cb-radio-starter-kits-uk/) **Description:** Explore CB radio starter kits designed for easy setup & use. Perfect for beginners of CB radio equipment, shop our range of CB radio starter kits today. --- ### [Scanners and Aerials](https://cbradio.co.uk/product-category/scanner-aerials/) **Description:** Shop scanner aerials at CB Radio UK. Improve your communication range with high-performance aerials designed for scanners. --- ### [Tools](https://cbradio.co.uk/product-category/tools/) **Description:** Browse tools for CB radio installation and maintenance at CB Radio UK. Find everything you need to optimise your setup. --- ### [Other](https://cbradio.co.uk/product-category/other/) **Description:** Browse miscellaneous communication equipment and accessories at CB Radio UK. Find everything you need to enhance your setup. --- ### [Amateur Radio](https://cbradio.co.uk/product-category/amateur-radio/) **Description:** Shop a wide range of amateur radio products at CB Radio UK. Find high-quality radios and accessories for amateur radio enthusiasts. --- ### [Amateur Radio Accessories](https://cbradio.co.uk/product-category/amateur-radio/amateur-accessories/) --- ### [CB Aerial Mounts and Brackets](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/) **Description:** Explore a selection of CB aerial mounts and brackets. Shop for sturdy and reliable solutions for your CB radio setup. --- ### [Power Supplies and Inverters](https://cbradio.co.uk/product-category/power-supplies-and-inverters/) **Description:** Browse power supplies and inverters for your CB radio at CB Radio UK. Find reliable options for stable power delivery and uninterrupted communication. --- ### [Network radio](https://cbradio.co.uk/product-category/network-radio/) **Description:** Discover network radios for clear, long-distance communication. Shop for professional-grade devices at CB Radio UK. --- ### [TV Aerials and Sattellite](https://cbradio.co.uk/product-category/tv-aerials-and-sattellite/) **Description:** Shop TV aerials and satellite equipment at CB Radio UK. Find reliable solutions for clear reception and better signal quality. --- ### [Installation aid](https://cbradio.co.uk/product-category/tv-aerials-and-sattellite/installation-aid/) **Description:** Get installation aids for TV aerials and satellite systems at CB Radio UK. Make setup easier with the right tools and support. --- ### [CB Radio Extension Speakers](https://cbradio.co.uk/product-category/extension-speakers/) **Description:** Find CB radio extension speakers at CB Radio UK. Enhance sound clarity with high-quality CB radio external speakers and shop from a variety of CB radio brands. --- ### [Amateur Radio Aerials](https://cbradio.co.uk/product-category/amateur-radio/amateur-radio-aerials/) --- ### [Hunting Accessories](https://cbradio.co.uk/product-category/hunting-accessories/) **Description:** Shop hunting accessories at CB Radio UK. Find communication equipment, gear, and tools for a successful hunting experience. --- ### [SWR meters](https://cbradio.co.uk/product-category/swr-meters/) **Description:** Measure the quality of your CB radio setup with SWR meters at CB Radio UK. Ensure optimal performance and signal clarity. --- ### [Truck Stuff](https://cbradio.co.uk/product-category/truck-stuff/) **Description:** Discover truck-specific CB radio equipment and accessories at CB Radio UK. Enhance your communication on the road with quality gear. --- ### [Taxi Aerials](https://cbradio.co.uk/product-category/taxi-aerials/) **Description:** Explore taxi aerials at CB Radio UK. Find durable aerials designed to withstand the demands of taxi communication. --- ### [Land Rover](https://cbradio.co.uk/product-category/car-parts/land-rover/) **Description:** Browse Land Rover car parts at CB Radio UK. Shop quality parts for enhanced vehicle performance and longevity. --- ### [Car Parts](https://cbradio.co.uk/product-category/car-parts/) **Description:** Explore top-quality CB Radio car parts at CB Radio UK. Shop online for high quality, reliable and durable CB Radio car parts for various makes and models. --- ### [Land Cruiser](https://cbradio.co.uk/product-category/car-parts/land-cruiser-car-parts/) **Description:** Find genuine Land Cruiser car parts at CB Radio UK. Enhance the performance and reliability of your vehicle with quality components. --- ### [TV aerials](https://cbradio.co.uk/product-category/tv-aerials-and-sattellite/tv-aerials/) **Description:** Shop TV aerials at CB Radio UK. Choose from a range of models for optimal reception and signal strength. --- ### [Health and Safety](https://cbradio.co.uk/product-category/health-and-safety/) **Description:** Explore health and safety equipment at CB Radio UK. Shop products designed to improve safety during outdoor adventures and work environments. --- ### [New Network Radio](https://cbradio.co.uk/product-category/network-radio/new-network-radio/) **Description:** Network is the newest form of communicating with others. It uses the internet either SIM card or being attached to a mobile phone. It then allows you to talk to anyone across the world. --- ### [PL259 Connectors](https://cbradio.co.uk/product-category/plugs-and-connectors/pl259-connectors/) **Description:** Shop PL259 connectors at CB Radio UK. Get durable, reliable connectors for your CB radio system. --- ### [Power Connectors](https://cbradio.co.uk/product-category/plugs-and-connectors/power-connectors/) **Description:** Browse power connectors at CB Radio UK. Find reliable connectors to ensure your CB radio gets consistent power. --- ### [Microphone Plugs](https://cbradio.co.uk/product-category/plugs-and-connectors/microphone-plugs/) **Description:** Explore microphone plugs for CB radios. Get high-quality connectors to ensure clear and reliable audio communication. --- ### [Mini Stinger](https://cbradio.co.uk/product-category/cb-aerials/mini-stingers/) --- ### [Long Stingers](https://cbradio.co.uk/product-category/cb-aerials/long-stingers/) --- ### [CRT](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/crt-cb-radio/) **Description:** CRT CB radio equipment available at CB Radio UK. Explore our wide range of CB radio equipment online at CB Radio UK from popular radio brand, CRT. --- ### [Anytone](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/anytone-cb-radio/) **Description:** Anytone CB radio equipment available at CB Radio UK. Explore our range of CB radio equipment online at CB Radio UK from popular radio brand, Anytone. --- ### [Moonraker](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/moonraker-cb-radio/) **Description:** Moonraker CB radio equipment available at CB Radio UK. Explore our wide range of CB radio equipment online at CB Radio UK from popular radio brand, Moonraker. --- ### [PNI](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/pni-cb-radio/) **Description:** PNI CB radio equipment available at CB Radio UK. Explore our wide range of CB radio equipment online at CB Radio UK from popular radio brand, PNI. --- ### [Alinco](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/alinco-cb-radio/) **Description:** Alinco CB radio equipment available at CB Radio UK. Explore our range of CB radio equipment online at CB Radio UK from popular radio brand, Alinco Radio. --- ### [Midland](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/midland-cb-radio/) **Description:** Midland CB radio equipment available at CB Radio UK. Explore our wide range of CB radio equipment online at CB Radio UK from popular radio brand, Midland. --- ### [President](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/president-cb-radio/) **Description:** President CB radio equipment available at CB Radio UK. Explore our wide range of CB radio equipment online at CB Radio UK from popular radio brand, President. --- ### [TTi](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/tti-cb-radio/) **Description:** Find TTI CB radios at CB Radio UK. Get high-performance radios designed for both beginner and experienced users. --- ### [Modulators](https://cbradio.co.uk/product-category/cb-aerials/modulators/) --- ### [PNI CB Antennas](https://cbradio.co.uk/product-category/cb-aerials/pni-cb-antennas/) **Description:** Explore PNI CB antennas for superior communication performance. Shop high-quality CB antennas for reliable long-range use. --- ### [Sirio cb Antennas](https://cbradio.co.uk/product-category/cb-aerials/sirio-cb-antennas/) --- ### [Homebase Aerials](https://cbradio.co.uk/product-category/cb-aerials/homebase-aerials/) **Description:** Shop for homebase aerials at CB Radio UK. Find robust and reliable aerials for static setups with enhanced signal reception. --- ### [RG58](https://cbradio.co.uk/product-category/coax-cable/rg58/) --- ### [RG8 mini8](https://cbradio.co.uk/product-category/coax-cable/rg8-mini8/) --- ### [RG213](https://cbradio.co.uk/product-category/coax-cable/rg213/) --- ### [F-Zero (Westflex)](https://cbradio.co.uk/product-category/coax-cable/f-zero-westflex/) --- ### [Patch Leads](https://cbradio.co.uk/product-category/coax-cable/patch-leads/) --- ### [Jopix](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/jopix-cb-radio/) **Description:** Jopix CB radio equipment available at CB Radio UK. Explore our wide range of CB radio equipment online at CB Radio UK from popular radio brand, Jopix. --- ### [CB Radio Din Mounts](https://cbradio.co.uk/product-category/cb-radio-accessories/cb-radio-din-mounts/) **Description:** Find durable DIN mounts for your CB radio setup. Shop for high-quality mounts that provide stability and convenience for your equipment. --- ### [CB Radio Power Leads](https://cbradio.co.uk/product-category/cb-radio-accessories/cb-radio-power-leads/) **Description:** Shop CB radio power leads at CB Radio UK. Find high-quality power cables for a stable connection and reliable performance. --- ### [CB radio Accessories](https://cbradio.co.uk/product-category/cb-radio-accessories/cb-radio-accessories-cb-radio-accessories/) **Description:** Shop a variety of CB radio accessories, from microphones to mounts. Enhance your CB radio system with reliable, high-quality accessories. --- ### [MAAS](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/maas-cb-radio/) **Description:** MAAS CB radio equipment available at CB Radio UK. Explore our wide range of CB radio equipment online at CB Radio UK from popular radio brand, MAAS. --- ### [CB Aerials with mount](https://cbradio.co.uk/product-category/cb-aerials/cb-aerials-with-mount/) **Description:** Browse CB aerials with mounts at CB Radio UK. Find the perfect solution for mounting your CB aerial securely and efficiently. --- ### [Superstar](https://cbradio.co.uk/product-category/cb-radios-uk-midland-pni-president/superstar-cb-radio/) **Description:** Superstar CB radio equipment available at CB Radio UK. Explore our wide range of CB radio equipment online at CB Radio UK from popular radio brand, Superstar. --- ### [PMR 446](https://cbradio.co.uk/product-category/pmr-446/) **Description:** Discover PMR 446 radios at CB Radio UK. Shop portable radios ideal for short-range communication in various environments. --- ### [HandHelds](https://cbradio.co.uk/product-category/pmr-446/pmr-446-handhelds/) --- ### [PMR 446 Mobile radio](https://cbradio.co.uk/product-category/pmr-446/pmr-446-mobile-radio/) --- ### [CB radio Hand Helds](https://cbradio.co.uk/product-category/cb-radio-hand-helds/) **Description:** Shop for handheld CB radios at CB Radio UK. Find compact, portable radios with reliable communication features. --- ### [Speaker Microphones](https://cbradio.co.uk/product-category/cb-radio-accessories/speaker-microphones/) **Description:** Discover speaker microphones for your CB radio. Shop for models that combine clear sound with easy-to-use features. --- ### [Rotators](https://cbradio.co.uk/product-category/rotators/) **Description:** Find rotators for your CB aerials at CB Radio UK. Shop for quality rotators that enable easy and precise antenna adjustments. --- ### [VHF UHF Transceivers](https://cbradio.co.uk/product-category/amateur-radio/vhf-uhf-transceivers/) **Description:** VHF UHF transceivers --- ### [HF Transceivers](https://cbradio.co.uk/product-category/amateur-radio/hf-transceivers/) **Description:** hf 10 meter transceivers --- ### [Gutter Mounts](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/gutter-mounts/) **Description:** CB radio aerial mounts --- ### [Mag Mounts](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/mag-mounts/) **Description:** Magnetic aerial mounts --- ### [Mirror Mounts](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/mirror-mounts/) --- ### [Side Mounts](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/side-mounts/) --- ### [DV Mounts](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/dv-mounts/) --- ### [Stud Mounts](https://cbradio.co.uk/product-category/cb-aerial-mounts-and-brackets/stud-mounts/) ---